LG | RT-29FB20RB | LG RT-29FB20RB Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0350C
(MC021A,
cover
require
089A/B TX,
and
quote this infor-
service.
3854VA0104A)
a
Contents
Installation
3
Location and function of controls
Remote control handset
Internal generator charge
Front panel / Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view /
Mute function / Auto Demonstration /
On screen language selection (option)
7
On
8
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Fine Tuning / Programme edit
Favourite programme
Calling the programme table
Setting
9
14
Picture adjustment
PSM / DRP (Digital Reality Picture)
DRPC (Digital Reality Picture Clarity) / Picture adjustment
Eye (option) / Picture format / Turbo picture selection (option)
Sound adjustment
SSM (Sound Status Memory) / Sound adjustment
Turbo sound selection (option)
Sound output selection / Stereo/Dual reception
NICAM reception (option)
17
Time
20
setting
Setting the
Auto sleep
clock /
the On/Off timer
Other functions
TV and AV modes / Auto AV switching (option)
Child lock / Auto sleep / Blue back (option)
Tilt / Degaussing / Sleep timer
21
PIP operation (option)
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change / Programme scan
23
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
24
Connection of PC
RGB PC mode (option) / PC in socket
27
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
Euro scart socket (option)
S-Video/Audio in sockets (S-AV) (option)
Component in sockets (option)
DTV in sockets (option)
Monitor out sockets
RF out sockets
Headphone socket
28
Troubleshooting
2
Setting
check list
31
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms
ial and mains
or
powercuts, please pull
out the aer-
plugs.
Warning
To prevent fire
moisture.
or
shock hazard, do not expose the set to rain
or
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
the
set is
placed
the ventilation
in
position to allow a free flow
openings on the back cover.
a
of air. Do not
cover
Manufactured under license from Dolby Laboratories. "Dolby"
"Pro Logic" and the double-D symbol are trademarks of Dolby
Laboratories.
3
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
Remote control handset
POWER
TV/AV
11
1
Before you use the remote control handset,
teries. See the next page.
1.
TV/AV
selects TV or AV mode.
switches the set on from
standby.
2.
NUMBER BUTTONS
switches the set on from
standby
3.
PSM (Picture Status
recalls your preferred
123
2
456
78
3
0
SSM
DRP
PICTURE
PSM
I/II
9
4
MENU
SOUND
5
12
T
U
R
B
O
13 4.
14
15
PR
6
VOL
VOL
OK
MENU
selects
6.
Δ / Ε
16
PIP PR
PIP PR
PIP INPUT
ARC
PIP SWAP
POSITION
SCAN
SIZE
18
accepts your selection
TIME
REVEAL
SLEEP
?
LIST
M
REW
PLAY
FF
P/STILL
STOP
REC
9
EYE/
menu
OK
7.
i
MIX
number.
Memory)
picture setting.
(Programme Up/Down)
adjusts
TEXT
STILL
a
a menu.
17
8
select
selects a programme or a menu item.
switches the set on from standby.
Φ / Γ (Volume Down/Up)
adjusts the volume.
MUTE
7
directly
install the bat-
I/II
selects the language during dual language broadcast.
selects the sound output (option).
5.
PR
PIP
or
please
19
20
10
settings.
or
displays
the current mode.
PIP BUTTONS
PIP
switches the sub picture on or off.
PIP PR +/selects a programme for the sub picture.
PIP SWAP
alternates between main and sub picture.
PIP INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
SCAN
switches on or off the programme scan mode through 12 sub
pictures.
8.
PIP SWAP
returns to the
selects
9.
previously viewed programme.
favourite programme.
a
LIST
displays
the programme table.
10. EYE/* (option)
switches the eye function
(With TELETEXT)
4
on or
off.
Location and function of controls
11. POWER
switches the set
on
from
standby
or
off to
standby.
12. SSM (Sound Status Memory)
recalls your preferred sound setting.
13. TURBO PICTURE BUTTON
selects Turbo picture.
14. DRP
(Digital Reality Picture)
switches DRP Pro
or
11
1
2
3
4
5
6
7
8
9
100.
2
15. TURBO SOUND BUTTON
selects Turbo sound.
16. MUTE
switches the sound
POWER
TV/AV
1
3
on or
off.
0
SSM
DRP
PICTURE
PSM
I/II
4
17. ARC
Ratio
Control)
(Aspect
changes the picture format.
MENU
SOUND
5
12
T
U
R
B
O
13
14
15
PR
18. TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
6
VOL
VOL
OK
PR
19. SLEEP
sets the
PIP
sleep
timer.
MUTE
16
7
20. VCR BUTTONS
control a LG video cassette recorder.
PIP PR
PIP PR
PIP INPUT
PIP SWAP
ARC
17
Note : In teletext mode, the PIP PR +/-, PIP SWAP and PIP INPUT
buttons are used for teletext function.
8
POSITION
SCAN
STILL
SIZE
SLEEP
19
Internal
LIST
generator charge
EYE/
: Do not rotate the handle too
remote control handset.
PLAY
FF
P/STILL
STOP
REC
9
The remote control handset can be charged with the internal electric
generator. To charge the remote control handset do the followings;
1. In first use,
20 rotation of the handle in the arrow direction as picture below
-> waiting for one minute -> 20 rotation again -> waiting for one
minute again -> 20 rotation again -> beginning to use
2. In usual use
5 or 6 rotation -> resuming to use
Note
REW
rapidly for
the
20
10
protection of the
(Without TELETEXT)
5
Location and function of controls
Front
panel
RF/RT-29FB20 series
7
8
ON/OFF
S-VIDEOL/MN
123
4
MENU
VOL
OK
PR
5
6
AUDIO
R
AV4
9
PCINPUT
Side
panel
1.
MAIN POWER (ON/OFF)
switches the set on or off.
2.
POWER/STANDBY INDICATOR
illuminates red when the set is in
set is switched on.
3.
REMOTE CONTROL SENSOR
4.
MENU
selects
5.
standby
mode and green when the
a menu.
OK
accepts your selection or displays the
Φ / Γ (Volume Down/Up)
current mode.
adjusts the volume.
adjusts menu settings.
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
6.
6
EYE (option)
adjusts picture according
to the
surrounding
conditions.
7.
HEADPHONE SOCKET
Connect the headphone plug to this socket.
8.
AUDIO/VIDEO IN SOCKETS (AV4)
Connect the audio/video out sockets of external equipment to these
sockets.
S-VIDEO/AUDIO IN SOCKETS (S-AV)
Connect the video out socket of an S-VIDEO VCR to the S-VIDEO
socket.
Connect the audio out sockets of the S-VIDEO VCR to the audio
sockets as in AV4.
9.
PC INPUT SOCKET
Connect the monitor output socket of the PERSONAL COMPUTER
to this socket.
Note : Set the resolution of PC to VGA 640x480 (60 Hz) video mode
to use this set as PC monitor.
Basic
operation
On and off
1.
2.
3.
4.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, Δ / Ε, TV/AV or
NUMBER buttons on the remote control handset to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
POWER
TV/AV
Programme
selection
You can select
buttons.
a
Volume
programme number with the Δ / Ε
or
NUMBER
adjustment
Press the Φ / Γ button to
adjust
1
2
3
4
5
6
7
8
9
0
SSM
the volume.
I/II
Quick view
MENU
Press the PIP SWAP button to view the last programme you
were
VOL
This function works only when Favourite programme is
set to Off. Otherwise each press of this button will select a stored
favorite programme.
T
U
R
B
O
PR
watching.
Note
SOUND
OK
VOL
:
PR
MUTE
Mute function
PIP SWAP
Press the MUTE button. The sound is switched off and the
display
W appears.
You
can
cancel it
by pressing
the MUTE, Φ / Γ, SSM, I/II, TURBO
SOUND button.
Auto Demonstration
To review all the menus programmed in the set, press the OK button of the front panel control for about 10 seconds. To stop auto
demonstration, press any button of the front panel control and
POWER button of the remote control.
On
screen
language
selection
The menu can be displayed
First select your language.
1.
2.
3.
on
the
(option)
screen
in desired
language.
Press the MENU button and then Δ / Ε button to select the
Special
menu.
Press the Γ button and then Δ / Ε button to select Language.
Press the Γ button and then Δ / Ε button to select your desired
language.
4.
All the on screen displays will appear in the selected language.
Press the OK or Φ button to select the Special menu.
Repeatedly press the MENU button to return to normal TV
viewing.
7
On
screen menus
The
an
between you and your set takes place on screen with
The buttons required for the operating steps are
dialogue
operator
menu.
also
displayed.
Menu selection
1.
Press the MENU button and then Δ / Ε button to
display
each
menu.
2.
3.
Press the Γ button and then Δ / Ε button to select a menu item.
Press the Γ button to display the sub menu or the pull-down
4.
Change
menu.
the
setting
of
an
item in the sub
or
pull-down
menu
with
Φ/ΓorΔ/Ε.
You
to
1
2
3
4
5
6
7
8
9
to the higher level menu with OK or Φ button and
to the lower level menu press the Γ button.
can move
move
Note :
a.
In the teletext mode, menus are not displayed.
b.
In some models, the Normal/Turbo search will not display,
only the Start will display in the Auto programme menu.
c.
In some models, the Language will not display.
Auto programme
Station
0
BG
AutoOprogramme
ManualOprogramme
{
System
StorageOfrom
{
{
{
I
ProgrammeOedit
FavouriteOprogramme
{
NormalOsearch
{
DK
{
TurboOsearch
{
M
{
2
MENU
PR
VOL
OK
()O}{O OKOMENU
()O}{O OKOMENU
Station
VOL
menu
Mamual programme
Picture
PR
PSM
{
DRP
{
DRPC
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
()O}{O OKOMENU
()O}{OOKOMENU
Picture
menu
Programme
Sound
SSM
{
Balance
{
AVL
{
DBS
{
§Volume
{
edit
O0OOCO03 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
()}{OOKOMENU
()O}{O OKOMENU
Sound
menu
Time
Clock
{
OffoTime
OnoTime
{
AutooSleep
{
{
()O}{OOKOMENU
T ime
menu
Special
Input
Language
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
PCoSetup
{
{
{
()O}{OOKOMENU
Special
TV programme
8
menu
Setting up
TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the Δ / Ε
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note
:
In
some
models up to 200 TV stations
Auto programme
can
be stored.
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1. Press the MENU button and then Δ / Ε button to select the
2.
Station
()O}{OOKOMENU
Station menu.
Press the Γ button and then Δ / Ε button to select Auto proAuto programme
BG
System
StorageOfrom
{
I
NormalOsearch
{
DK
TurboOsearch
{
M
{
1
2
3
4
5
6
7
8
9
()O}{OOKOMENU
0
3.
4.
5.
6.
7.
8.
9.
gramme.
Press the Γ button to display the Auto programme menu.
Press the Γ button. Select a TV system with the Δ / Ε button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the Φ button.
Press the Δ / Ε button to select Storage from.
Press the Γ button. Select the beginning programme number
with the Φ / Γ button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
Press the OK button.
Press the Δ / Ε button to select Normal or Turbo search.
MENU
PR
VOL
OK
VOL
PR
Option: In some models, you can only select Start.
Note :
a.
Turbo search is faster than Normal search and in some
models, these searches will automatically store all receivable
stations.
b. If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
10. Press the Γ button to begin auto programming.
Auto programme
Auto programme
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
{
OOCO01O(BG)
7
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
36%
MENU
{
OOCO01O(BG)
7
36%
MENU
(Normal search)
All receivable stations
(Turbo search)
are
stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11. Repeatedly press the MENU or Φ button to return to normal TV
viewing.
9
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
TV stations
Manual programme
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
()O}{OOKOMENU
2.
3.
Press the MENU button and then Δ / Ε button to select the
Station menu.
Press the Γ button and then Δ / Ε button to select Manual
programme.
Press the Γ button to display the Manual programme
menu.
Mamual programme
1
2
3
4
5
6
7
8
9
4.
5.
MENU
PR
OK
PR
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
2
{
()O}{OOKOMENU
0
VOL
Storage
System
VOL
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Press the Δ / Ε button to select Storage.
Press the Γ button to select the programme number. Select the
desired programme number (0 to 99) with the Φ / Γ button or
NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it,
i.e. '05' (or '005') for 5.
Press the Φ button.
Press the Δ / Ε button to select System.
Press the Γ button. Select a TV system with the Δ / Ε button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or Φ button.
Press the Δ / Ε button to select Channel.
Press the Γ button. Press the Δ / Ε button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
Press the OK or Φ button.
Press the Δ / Ε button to select Search.
Press the Γ button. Press the Φ / Γ button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
Mamual programme
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
{
{{{{
Stored
16. To store another station, repeat steps 4 to 15.
17. Repeatedly press the MENU or Φ button to return to normal TV
viewing.
10
TV stations
Setting up
Assigning a station name
1. Repeat the 'Manual programme tuning' steps
2.
3.
4.
5.
6.
7.
Station
1 to 3.
Press the Δ / Ε button to select Name.
Press the Γ button on the Name pull-down menu.
Press the Δ button. You can use a blank, +, -, the numeric 0 to 9
and the alphabet A to Z.
With the Ε button you can select in the opposite direction.
Select the position by pressing the Φ / Γ button and then take
your choice of the second character, and so on.
Press the OK button.
Repeatedly press the MENU or Φ button to return to normal TV
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
()O}{OOKOMENU
viewing.
Booster (option)
In some models, Booster is an optional function.
Booster can perform this function.
If the
Only
a
set with
is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
Booster to On.
1.
2.
3.
4.
5.
6.
1
2
3
4
5
6
7
8
9
reception
the 'Manual programme tuning' steps 1 to 3.
Press the Δ / Ε button to select Booster.
Press the Γ button.
Press the Δ / Ε button to select On or Off on the Booster pulldown menu.
Press the OK or Φ button.
Repeatedly press the MENU or Φ button to return to normal TV
Repeat
0
MENU
PR
VOL
OK
VOL
PR
viewing.
Fine
tuning
Normally
1.
2.
3.
4.
fine
tuning
is
only necessary
if
reception
is poor.
the 'Manual programme tuning' steps 1 to 3.
Press the Δ / Ε button to select Fine.
Press the Γ button.
Press the Φ / Γ button to fine tune for the best picture and
sound on the Fine pull-down menu.
Repeat
Mamual programme
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
{
{{{{
()O}{OOKOMENU
5.
6.
Press the OK button.
Repeatedly press the MENU
or Φ
viewing.
The finely tuned programme will
during programme selection.
button to return to normal TV
be indicated
by yellow
number
11
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
Programme
TV stations
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
()O}{OOKOMENU
2.
3.
Press the MENU button and then Δ / Ε button to select the
Station menu.
Press the Γ button and then Δ / Ε
button to select
Programme edit.
Press the Γ button to display the Programme edit menu.
Programme edit
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
1
2
3
4
5
6
7
8
9
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
0
Deleting
1.
2.
MENU
PR
VOL
()}{OOKOMENU
OK
a programme
Select a programme to be deleted with the Δ / Ε or Φ / Γ button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
Copying
VOL
1.
2.
PR
a programme
Select a programme to be copied with the Δ / Ε
Press the GREEN button.
All the following programmes are shifted down
or Φ
one
/ Γ button.
position.
Moving
1.
2.
3.
a programme
Select a programme to be moved with the Δ / Ε or Φ / Γ button.
Press the YELLOW button.
Move the programme to the desired programme number with
theΔ/ΕorΦ/Γbutton.
4.
Press the YELLOW button
again
to release this function.
Programme edit
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
MoveOOff
()}{OOKOMENU
a programme number
Select a programme number to be skipped with the Δ / Ε or Φ / Γ
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the Δ / Ε button during normal TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.
Skipping
1.
2.
3.
Repeatedly press
viewing.
12
the MENU
or Φ
button to return to normal TV
Setting up
TV stations
Favourite programme
Station
This function lets you select your favorite programmes
1.
2.
directly.
Press the MENU button and then Δ / Ε button to select the
Station menu.
Press the Γ button and then Δ / Ε button to select Favourite
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
programme.
3.
Press the Γ button to
display
the Favourite programme
menu.
()O}{OOKOMENU
Favourite programme
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
Off
56n Ca 05
()O}{OOKOMENU
4.
5.
6.
7.
8.
9.
Press the Φ / Γ button to select On or Off.
Press the Δ / Ε button to select
-----.
Select a desired programme with the Φ / Γ button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
To store another programme, repeat steps 5 to 6.
You can store up to 5 programmes.
Press the OK button.
Repeatedly press the MENU or Φ button to return to normal TV
1
2
3
4
5
6
7
8
9
--
0
MENU
PR
viewing.
Repeatedly press the PIP SWAP button to select stored favourite
programmes.
VOL
OK
VOL
PR
Calling
the programme table
You can check the programmes stored in the memory
the programme table.
by displaying
programme table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
Displaying
Station
OOOOCO01 OOO5OOSO69
LIST
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
()}{OOKOMENU
Note :
a.
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
a programme in the programme table
Select a programme with the Δ / Ε or Φ / Γ button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
Paging through a programme table
are 10 (or 20) programme table pages which contain 100 (or
200) programmes.
Pressing the Δ / Ε or Φ / Γ button repeatedly turns the pages.
Repeatedly press the MENU or Φ button to return to normal TV
viewing.
There
13
Picture
Picture
PSM
PSM
{
DRP
{
DRPC
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
1.
2.
3.
()O}{OOKOMENU
adjustment
(Picture Status Memory)
Press the MENU button and then Δ / Ε button to select the
Picture menu.
Press the Γ button and then Δ / Ε button to select PSM.
Press the Γ button and then Δ / Ε button to select a picture
setting on the PSM pull-down menu.
Picture
1
2
3
4
5
6
7
8
9
PSM
Standard
{
Mild
Contrast
{
Game
Brightness
{
User
Colour
{
Sharpness
{
or Φ
Press the OK
5.
Repeatedly press
viewing.
button.
the MENU
or Φ
button to return to normal TV
a desired picture (Dynamic, Standard,
User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for good picture reproduction at the factory and cannot be changed.
can
also recall
Mild, Game
PR
OK
Dynamic
{
DRPC
4.
You
MENU
VOL
{
DRP
()O}OOKOMENU
0
DRP
PSM
or
VOL
DRP
PR
1.
2.
3.
(Digital Reality Picture)
Press the MENU button and then Δ / Ε button to select the
Picture menu.
Press the Γ button and then Δ / Ε button to select DRP.
Press the Γ button and then Δ / Ε button to select Pro or 100
on the DRP pull-down menu.
Picture
PSM
{
DRP
{
0Pro
DRPC
{
0100
Contrast
{
Brightness
{
Colour
{
Sharpness
{
()O}OOKOMENU
4.
Press the OK
or
Φ button.
Repeatedly press the MENU or Φ button to return to normal TV
viewing.
Note : DRP is always set to Pro in case of NTSC input, double window mode or multipicture mode.
5.
You can also switch DRP Pro
control.
14
or
100 with DRP button
on
the remote
Picture
DRPC
1.
2.
3.
(Digital Reality
Picture
adjustment
Picture
Clarity)
Press the MENU button and then Δ / Ε button to select the
Picture menu.
Press the Γ button and then Δ / Ε button to select DRPC.
Press the Γ button and then Δ / Ε button to select On or Off
on the DRPC pull-down menu.
PSM
{
DRP
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
()O}{OOKOMENU
Picture
PSM
{
DRP
{
DRPC
{
0On
Contrast
{
0Off
Brightness
{
Colour
{
Sharpness
{
()O}OOKOMENU
or Φ
4.
Press the OK
5.
Repeatedly press
viewing.
Picture
You
button.
the MENU
or
Φ button to return to normal TV
adjustment
2
3
4
5
6
7
8
9
PSM
0
MENU
adjust picture contrast, brightness, colour intensity,
and tint (NTSC input only) to the levels you prefer.
can
ness
1
sharpPR
VOL
1.
2.
Press the MENU button and then Δ / Ε button to select the
Picture menu.
Press the Γ button and then Δ / Ε button to select Contrast,
Brightness, Colour or Sharpness.
OK
VOL
PR
PSM
PSM
{
DRP
Contrast
{
Brightness
{
Colour
{
Sharpness
{
{
100
()O}{OOKOMENU
3.
Press the Γ button and then Φ / Γ button to make
on the each sub menu.
appropriate
adjustments
Contrast
80
}{O()OOKOMENU
4.
5.
Press the OK button to store it for the picture user.
Repeatedly press the MENU or Φ button to return to normal TV
viewing.
15
Picture
adjustment
Eye (option)
Eye is an optional function. Only a set with eye option can perform
this function.
In some models, the set will automatically adjust the picture according to the surrounding conditions. This will enable you to enjoy the
most suitable picture according to the surroundings.
Press the EYE/* button to switch the eye function
on or
off.
Off
1
2
3
4
5
6
7
8
9
PSM
0
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
At this time the display
in green does not appear continuin yellow appears each time the picture
ously but the display
condition changes.
PICTURE
: If you press the PSM or TURBO PICTURE button with the
eye function, the eye function is automatically switched off.
Note
T
U
R
B
O
Picture format
PR
You
VOL
OK
VOL
4:3
This
PR
ARC
EYE/
can
watch TV in various picture formats; 4:3, 16:9 or Zoom.
press the ARC button to select your desired picture format.
Repeatedly
picture
format is 4 to 3 of
general
TV.
16:9
You can
enjoy the cinema (the picture format of 16:9) or general TV
programme through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full.
Zoom
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper / lower and left / right sides
so that the screen 16:9 is full. The bottom and top of the picture
may be lost.
Note
:
In the PC and 2/12 PIP modes, ARC function isn't available.
Turbo
picture
selection
(option)
When this function is on, the picture will be more brilliant and distinct than normal picture.
Repeatedly press the TURBO PICTURE button to switch on or off.
(Turbo Picture off)
(Turbo Picture on)
Note : If you press the PSM button with the Turbo picture function,
the Turbo picture function is automatically switched off.
16
Sound
SSM
You
adjustment
(Sound Status Memory)
Sound
preferred sound setting; Dolby Virtual (option),
Flat, Music, Speech or Movie and you can also adjust the sound
frequency of equalizer.
1.
2.
3.
can
select your
Press the MENU button and then Δ / Ε button to select the
Sound menu.
Press the Γ button and then Δ / Ε button to select SSM.
Press the Γ button and then Δ / Ε button to select a sound setting on the SSM pull-down menu.
SSM
{
Balance
{
AVL
{
DBS
{
§Volume
{
()O}{OOKOMENU
Sound
SSM
{
DolbyoVirtual
Balance
{
Flat
AVL
{
Music
DBS
{
Speech
{
Movie
§Volume
User
1
2
3
4
5
6
7
8
9
0
SSM
{
()O}OOKOMENU
Dolby Virtual (option)
Dolby Virtual lets you experience panoramic
Sound Frequency Adjustment
a. Press the Γ button in User to
effects of sound.
MENU
PR
display
the User sub
menu.
VOL
OK
VOL
PR
0.1O0.5O1.5O5.0O10OkHz
()O}{OOKOMENU
b. Select a sound band by pressing the Φ / Γ button.
c. Make appropriate sound level with the Δ / Ε button.
d. Press the OK button to store it for the sound User.
Repeatedly press
viewing.
You
can
also recall
the MENU
a
or Φ
desired sound
Music, Speech, Movie
button to return to normal TV
(Dolby
Virtual
with SSM button
(option), Flat,
the remote
control. The sound Dolby Virtual (option), Flat, Music, Speech
and Movie are programmed for good sound reproduction at the
factory and cannot be changed.
or
User)
on
If you press the SSM button after making appropriate adjustthe User sub menu, the display User automatically
even
appears
though you have already set a factory preset setting;
Dolby Virtual (option), Flat, Music, Speech or Movie.
Note
:
ment on
17
Sound
Sound
Sound
SSM
{
Balance
{
AVL
{
DBS
{
§Volume
{
()O}{OOKOMENU
3.
3
4
5
6
7
8
can
phone
2.
2
adjustment
adjust balance, AVL (Auto Volume Leveler), DBS or headvolume/sound. AVL automatically keeps on an equal volume
level even if you change programmes. If you switch DBS to on, the
set creates a dynamic bass sound. The Turbo sound creates an all
around sound as in a concert hall.
You
1.
1
adjustment
Press the MENU button and then Δ / Ε button to select the
Sound menu.
Press the Γ button and then Δ / Ε button to select the desired
sound item; Balance, AVL, DBS or §Volume.
Make desired adjustment with the Φ / Γ, Δ / Ε or OK button
on each pull-down menu.
Sound
9
SSM
{
Balance
{
AVL
{
DBS
{
§Volume
0
{
0
}{OOKOMENU
MENU
SOUND
PR
VOL
OK
VOL
T
U
R
B
O
4.
Repeatedly press
viewing.
Note
:
In
Dolby
the MENU
or Φ
button to return to normal TV
Virtual mode, AVL and DBS is not available.
PR
Turbo sound selection (option)
When this function is on, the sound will be more emphasized and
amplified than normal sound.
Repeatedly press the TURBO SOUND button to switch on or off.
MEGA TURBO
(Turbo Sound off)
(Turbo Sound on)
Sound output selection
In AV mode, you
can
select output sound for the left and
right
loud-
speakers.
Repeatedly press the I/II button to select the sound output.
:
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loudspeaker.
L+L :
Audio signal from audio L input is sent to left and right loudspeakers.
R+R :
Audio signal from audio R input is sent to left and right loudspeakers.
L+R
18
Sound
Stereo/Dual
adjustment
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disap-
pear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
Language
If
selection for dual
language
2
3
4
5
6
7
8
9
0
broadcast
programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II buta
ton
1
I/II
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
19
Time
Time
Setting
Clock
{
OffoTime
OnoTime
{
AutooSleep
{
1.
{
2.
3.
Setting
the clock
Press the MENU button and then Δ / Ε button to select the
Time menu.
Press the Γ button and then Δ / Ε button to select Clock.
Press the Γ button and then Δ / Ε button to adjust the hour.
T ime
()O}{OOKOMENU
Clock
{
OffoTime
OnoTime
{
AutooSleep
{
-i-o:o-i-
AM
{
()O}{OOKOMENU
4.
1
2
3
4
5
6
7
8
9
0
5.
6.
Press the Γ button and then Δ / Ε button to adjust the minute.
Press the OK button.
Repeatedly press the MENU or Φ button to return to normal TV
viewing.
Setting
the On/Off timer
By using this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using on/off time
function.
MENU
1.
PR
2.
VOL
OK
VOL
3.
Press the MENU button and then Δ / Ε button to select the
Time menu.
Press the Γ
button and then Δ / Ε button to select Off
Time/On Time.
Press the Γ button and then Δ / Ε button to adjust the hour.
PR
T ime
Clock
{
OffoTime
OnoTime
{
{
00i:i00 AM
AutooSleep
{
Pr1
Vol
30
Off
()O}{OOKOMENU
4.
5.
6.
7.
Press the Γ button and then Δ / Ε button to adjust the minute.
Only On Time function; Press the Γ button and then Δ / Ε
button to adjust programme number and volume level.
Press the OK button.
Repeatedly press the MENU or Φ button to return to normal TV
viewing.
Note :
a.
This function works only in standby mode.
b.
To view the remaining on/off time, select the Time menu.
c.
When you switch the main power off, the Time is reset and the
On/Off time is off.
d.
1' is displayed, one minute before the Monitor is due to
switch off.
'
Auto
sleep
If you select On on the Auto Sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
1.
2.
3.
4.
Press the MENU button and then Δ / Ε button to select the
Time menu.
Press the Γ button and then Δ / Ε button to select Auto Sleep.
Press the Γ button and then Δ / Ε button to select On or Off on
the Auto Sleep pull-down menu.
Repeatedly press the MENU or Φ button to return to normal TV
viewing.
20
Other functions
TV and AV modes
Special
be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Inputs
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
2.
3.
Press the MENU button and then Δ / Ε
Special
Input
Language
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
PCoSetup
{
{
{
button to select the
()O}{OOKOMENU
menu.
Press the Γ button and then Δ / Ε button to select Input.
Press the Γ button and then Δ / Ε button to select TV, AV1,
AV2, AV3, AV4, COMPONENT1, COMPONENT2 or RGB PC
on the Input pull-down menu.
Special
TV/AV
Input
Language
{
TV
{
AV1
Childolock
{
AV2
Blueoback
{
AV3
Tilt
{
AV4
Degauss
PCoSetup
{
COMPONENT1
{
COMPONENT2
RGBvPC
1
2
3
4
5
6
7
8
9
()O}OOKOMENU
0
4.
AV1 : VCR connected to the Euro scart socket or AV1 sockets
on the set
AV2 : VCR connected to the AV2 sockets on the set
AV3 : VCR connected to the Euro scart socket or AV3 sockets
on the set
AV4 : VCR connected to the AV4 sockets on the set
COMPONENT 1 : COMPONENT connected to the COMPONENT 1 sockets on the back
COMPONENT 2 : HD-SET TOP connected to the COMPONENT 2 sockets on the back
RGB PC : PERSONAL COMPUTER connected to the PC
INPUT socket on the set
Repeatedly press the MENU or Φ button to return to normal TV
MENU
PR
VOL
OK
VOL
PR
viewing.
Alternatively
you
TV/AV button.
can
select the TV
or
AV mode
In AV mode, to return to TV mode, press the Δ / Ε
by pressing
or
the
NUMBER but-
tons.
Auto AV
switching (option)
If your VCR outputs switching voltage when it is switched to playback with the VCR connected to the Euro scart socket. The set is
automatically switched to AV 1 mode when an AV signal is input.
But if you want to keep on watching TV mode, press the Δ / Ε or
NUMBER buttons.
Press the TV/AV button to return to AV modes.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
Press the MENU button and then Δ / Ε
Special
2.
3.
4.
button to select the
menu.
Press the Γ button and then Δ / Ε button to select Child lock.
Press the Γ button and then Δ / Ε button to select On or Off on
the Child lock pull-down menu.
Repeatedly press the MENU or Φ button to return to normal TV
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the screen if
any button on the front panel is pressed while displaying the menus.
21
Other functions
Special
Blue back
Input
Language
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
PCoSetup
{
{
on
ground appears
on
1.
2.
3.
4.
the Blue back pull-down menu, the blue backthe screen when there is no or poor signal.
Press the MENU button and then Δ / Ε
Special
{
()O}{OOKOMENU
(option)
If you select On
button to select the
menu.
Press the Γ button and then Δ / Ε button to select Blue back.
Press the Γ button and then Δ / Ε button to select On or Off on
the Blue back pull-down menu.
Repeatedly press the MENU or Φ button to return to normal TV
viewing.
Note : The blue background automatically appears
when there is no signal in AV mode.
1
2
3
Tilt
4
5
6
The TV
another
7
8
9
1.
0
2.
3.
MENU
4.
OK
left
can
screen
or right if the TV set moves to
be used to compensate the tilt.
Press the MENU button and then Δ / Ε
Special
the
button to select the
menu.
Press the Γ button and then Δ / Ε button to select Tilt.
Press the Γ button and then Φ / Γ button to adjust the tilt on the
Tilt pull-down menu.
Repeatedly press the MENU button to return to normal TV
viewing.
PR
VOL
picture may tilt to the
position. This function
on
VOL
Degaussing (option)
Owing to the super large Tube in the set. The colour purity of the
picture may be affected by other magnetic influences such as
speakers. Stripes may appear on the screen or there may be colour
patches.
PR
1.
SLEEP
2.
3.
4.
Press the MENU button and then Δ / Ε
Special
button to select the
menu.
Press the Γ button and then Δ / Ε button to select Degauss.
Press the Γ button and then Δ / Ε button to select On on the
Degauss pull-down menu. After the degauss function works,
On mode switches to Off mode.
Repeatedly press the MENU or Φ button to return to normal TV
viewing.
Note : If you cannot adjust the
it again after about 4 minutes.
Sleep
screen
condition
by degaussing, try
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The dis0 will appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
Note :
a.
To view the remaining sleep time, press the SLEEP button once.
b. To cancel the sleep time, repeatedly press the SLEEP button
until the display
0 appears.
c.
When you switch the set off, the set releases the preset sleep time.
22
PIP
Option
PIP is
operation (option)
:
an
optional function,
so
that
set with PIP function can
only the
operate.
PIP
(Picture
in
Picture) displays
a
picture
within
a
picture.
On and off
Press the PIP button to switch on the sub
press this button again to switch it off.
mode selection for sub
Input
picture.
picture
Press the PIP INPUT button to select the
input
mode for the sub
picture.
Each time this button is pressed, each
ture is displayed as shown below.
Programme
number
pic-
1
2
3
4
5
6
7
8
9
AV3
between main and sub
Press the PIP SWAP button to
mode for the sub
AV2
AV1
AV4
Swapping
input
exchange
0
pictures
the main and sub
pic-
PR
tures.
VOL
Programme
selection for sub
picture
PR
PIP
Press the PIP PR +/- button. The selected programme number is
below the programme number of main picture.
displayed just
Sub
picture
PIP PR
PIP PR
PIP INPUT
PIP SWAP
size
POSITION
Repeatedly press the SIZE button to select the
size. The sub picture appears as below.
1/16 size of the main picture
1/9 size
Sub
picture
desired sub
SCAN
STILL
SIZE
picture
1/2 size
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
VOL
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub picture moves clockwise.
Programme
position
is
scan
This function enables you to search all the stored stations in 12 sub
pictures mode only and see your favorite station by exchanging the
main and sub pictures.
Press the SCAN button repeatedly to select 12 sub pictures.
the selected 12 sub pictures search all the stored stations.
Press the SCAN button again to switch off these sub pictures.
Only
23
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
Teletext is
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
TV/AV
1
2
3
4
5
6
7
8
9
Switch on/off
Press the TEXT button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT or TV/AV button to switch off teletext. The previous
mode reappears.
0
PR
SIMPLE text
OK
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the preceding or fol-
Page
1.
PR
TEXT
2.
lowing page.
Programming
M
a
colour button in LIST mode
If the TV is in SIMPLE text, TOP text
M
button to switch to LIST mode.
or
FASTEXT mode, press the
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
1.
Press
a
2.
Using
the NUMBER buttons, select the page you wish to pro-
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
4.
can select this page with the same coloured button.
The three other coloured buttons are programmed in the
way.
24
coloured button.
same
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
4. The red button permits to return to previous selection.
Alternatively the Ε button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
1
2
3
4
5
6
7
8
9
0
FASTEXT
PR
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
selection
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The Δ / Ε button can be used to select the preceding or fol-
Page
1.
2.
3.
4.
PR
i
lowing page.
25
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
1
2
3
Press this
4
5
6
page.
Press this button
7
8
9
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
0
Displays
the TV
picture
on
the
screen
while
waiting
for the
new
will appear at the top left hand
teletext page. The display
corner of the screen. When the updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
PR
HOLD
PR
Stops
the automatic page
change
which will
occur
if
a
tele-
text page consists of 2 or more sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
stop symbol is displayed
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
?
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
picture
off press this button
again.
TIME
viewing a TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button again to remove the display. In the teletext mode,
When
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED / GREEN, Δ / Ε
NUMBER buttons.
change
Press this button
26
again
to exit this function.
or
Connection of PC
RGB PC mode
You
as
1.
2.
3.
adjust
prefer.
can
you
(option)
horizontal/vertical
horizontal/vertical size
position,
TV/AV
Repeatedly press the TV/AV button to select the RGB PC
mode.
Press the MENU button and then Δ / Ε button to select the
Special
menu.
Press the Γ button and then Δ / Ε button to select PC
Setup.
1
2
3
4
5
6
7
8
9
Special
Input
Language
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
PCoSetup
{
0
{
{
MENU
Tooset
PR
()O}{OOKOMENU
4.
VOL
Press the Γ button and then Δ / Ε button to select V-Position,
or H-Size on the PC Setup pull-down
V-Size, H-Position
VOL
OK
PR
menu.
5.
Press the Γ button and then Φ / Γ button to make
appropriate
adjustments.
PC
Setup
V-Position
{
V-Size
H-Position
H-Size
{
0
{
{
()O}{OOKOMENU
6.
7.
V-Position
This function is to
adjust picture
V-Size
This function is to
change
H-Position
This function is to
adjust picture
H-Size
This function is to
change
to up or down as you
the vertical
screen
to left or
the horizontal
prefer.
size.
right
as
screen
you
prefer.
size.
Press the OK button to store it for the PC monitor picture.
Repeatedly press the MENU or Φ button to return to normal PC
viewing.
PC in socket
1.
2.
3.
4.
Connect the monitor output socket of the PERSONAL COMPUTER to the PC INPUT socket on the set.
Connect the audio cable from the PC to the AUDIO sockets on
the set.
Press the TV/AV button to select RGB PC.
Turn the PC on, and the PC picture appears on the screen.
The set can be operated as the PC monitor.
Note : Set the resolution of PC to VGA 640x480
mode to use this set as PC monitor.
(60 Hz)
video
S-VIDEOL/MN
AUDIO
R
AV4
PCINUT
PERSONAL COMPUTER
27
Connection of external
You
can
connect additional
equipment
equipment,
such
as
VCRs, camcorders
etc. to your set.
Y
VIDEO
PB
PR
(L)
PR
(L)
AUDIO
-
(R)
-
COMPONENT1
(480i/480p
/1080i)
DVD
/DTV
INPUT
COMPONENT2
VIDEO
Y
VIDEO
ANT IN
L L 75Ω
PB
(L)
-
AUDIO
-
AUDIO
-
(R)
-
Here shown may be somewhat different from your set.
(480p/1080i)
(R)
RF
OUT
AV2
MONITOR
OUT
IN
OUT
AV1
VIDEO
IN
(MONO)
AV3
IN
(L/MONO)AUDIO(R)
Aerial socket
IN
1.
VCR
2.
3.
4.
Y
VIDEO
PB
PR
(L)
AUDIO
-
(R)
-
COMPONENT1
(480i/480p
/1080i)
DVD
/DTV
INPUT
COMPONENT2
(480p/1080i)
VIDEO
Y
PB
PR
(L)
AUDIO
-
(R)
-
5.
ANT IN
L L 75Ω
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
2
1
OUT
VIDEO
(L/MONO)AUDIO(R)
IN
MONITOR
OUT
AV3
IN
Audio/Video in/out sockets
VCR
1.
2.
(option)
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to RF OUT sockets of the set.
If the VCR is connected to the AV sockets on the set, press the
TV/AVbuttontoselectAV1,AV2,AV3orAV4.
Y
VIDEO
PB
PR
(L)
-
PR
(L)
-
AUDIO
(R)
-
COMPONENT1
(480i/480p
/1080)
DVD
/DTV
INPUT
COMPONENT2
VIDEO
Y
VIDEO
ANT IN
LL 75Ω
PB
(L)
-
AUDIO
-
AUDIO
(R)
-
3.
(480p/1080i)
(R)
RF
OUT
AV2
IN
Press the PLAY button on the VCR.
The VCR playback picture appears on the
screen.
MONITOR
OUT
OUT
AV1
VIDEO
IN
(MONO)
AV3
IN
(L/MONO) AUDIO(R)
You
IN
can
also record programmes received
out sockets.
by
the TV
on
video
tape via audio/video
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
VCR
Euro scart socket
S-VIDEOL/MN
1.
2.
AUDIO
R
AV4
PCINUT
(option)
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage connect to Euro scart
socket, the set will switch to AV 1 or AV 3 mode automatically.
But if you want to keep on watching TV mode, press the Δ / Ε
NUMBER buttons.
or
VCR
Otherwise press the TV/AV button
on
set to select AV 1 or AV 3. The VCR
on
the
You
VIDEO
Y
PB
PR
(L)
-
AUDIO
-
(R)
the remote control hand-
playback picture appears
screen.
can
also record programmes received
by the TV
on
video tape.
COMPONENT1
(480i/480p
/1080i)
DVD
/DTV
INPUT
COMPONENT2
(480p/1080)
VIDEO
Y
PB
PR
(L)
-
AUDIO
-
(R)
Note
:
ANT IN
L L 75Ω
a.
1
2
OUT
VIDEO
MONITOR
OUT
AV3
IN
VCR
28
(LMONO) AUDIO(R)
IN
b.
i.e. the signals red, green and blue can only
be selected for the Euro scart socket 1. These signals are
transmitted, for example, by a pay TV decoder, game machine
or photo CD unit, etc.
If both Euro scart 1 and 3 sockets have been connected to the
VCRs simultaneously, only the AV 3 can be received.
Signal type RGB,
Connection of external
S-Video/Audio in sockets
When
connecting
picture quality will
1.
2.
3.
4.
equipment
(S-AV) (option)
an S-VIDEO VCR to the S-VIDEO socket, the
be further improved.
S-VIDEOL/MN
AUDIO
Connect the S-Video socket of the VCR to the S-VIDEO socket of the set.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
Select AV 4 by pressing the TV/AV button repeatedly.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
R
AV4
PCINUT
VCR
Note : If both S-VIDEO and VIDEO sockets have been connected
to the S-VHS VCR simultaneously, only the S-VIDEO can be
received.
Y
VDEO
PB
PR
(L)
PR
(L)
AUDIO
-
-
(R)
-
(R)
COMPONENT1
(480/480p
/1080i)
DVD
/DTV
INPUT
COMPONENT2
VIDEO
Y
PB
VIDEO
ANT IN
L L 75Ω
AUDIO
-
(480p/1080i)
L)-AUDIO-(R)
RF
OUT
AV2
MONITOR
OUT
IN
OUT
AV1
VIDEO
IN
AV3
IN
(MONO)
Component
1.
2.
3.
4.
in sockets
(LMONO) AUDIO(R)
IN
(option)
Connect the COMPONENT video output sockets (Y Cb Cr, Y
Pb Pr or Y B-Y R-Y) of the COMPONENT1 (480i/480p/1080i) to
the COMPONENT INPUT sockets (Y PB PR) on the set.
Connect the audio cable from the COMPONENT to AUDIO IN
sockets of COMPONENT1 (480i/480p/1080i).
Press the TV/AV button to select COMPONENT1.
Press the PLAY button on the COMPONENT.
The COMPONENT playback picture appears on the screen.
COMPONENT
(DVD)
VIDEO
PB
PR
(L)
-
Y
PB
PR
(L)
-
AUDIO
Y
(R)
-
COMPONENT1
(480i/480p
/1080i)
DVD
/DTV
INPUT
COMPONENT2
(480p/1080)
VIDEO
VDEO
ANT IN
LL 75Ω
( )-AUDIO
AUDIO
-
(R)
(R)
RF
OUT
AV2
IN
MONITOR
OUT
OUT
AV1
IN
VIDEO
AV3
IN
(MONO)
DTV in sockets
1.
Connect the
(480p/1080i)
2.
3.
(option)
HD-SET TOP
inputs
of
the
COMPONENT2
to the COMPONENT INPUT sockets
the set.
Connect audio
(L/MONO) AUDIO(R)
IN
inputs
to Audio
sockets
of
(Y
PB
PR)
COMPONENT
(DTV)
on
COMPONENT2
(480p/1080i).
Press the TV/AV button to select COMPONENT2.
Y
PB
PR
(L)
-
Y
PB
PR
(L)
-
VIDEO
AUDIO
-
(R)
-
(R)
COMPONENT1
(480i/480p
/1080i)
DVD
/DTV
INPUT
COMPONENT2
(480p/1080)
VIDEO
VIDEO
ANT IN
Monitor out sockets
L L 75Ω
(L)
-
AUDIO
-
AUDIO
(R)
RF
OUT
AV2
IN
MONITOR
OUT
OUT
AV1
IN
VIDEO
AV3
IN
(MONO)
Connect the audio/video in sockets of the other TV
MONITOR OUT sockets of the set.
or
(LMONO) AUDIO(R)
IN
monitor to
Second TV
RF out sockets
Connect the audio/video in sockets of the other TV
OUT sockets of the set.
or
monitor to RF
Y
PB
VIDEO
PR
(L)
-
PR
(L)
-
AUDIO
-
(R)
COMPONENT1
(480i/480p
/1080i)
DVD
/DTV
INPUT
COMPONENT2
(480p/1080i)
VIDEO
Y
VIDEO
ANT IN
LL 75Ω
PB
(L)
-
AUDIO
-
AUDIO
-
(R)
(R)
RF
OUT
AV2
IN
MONITOR
OUT
OUT
AV1
IN
VIDEO
(MONO)
AV3
IN
(L/MONO) AUDIO(R)
IN
Second TV
29
Connection of external
Headphone
equipment
socket
Insert the headphone plug to the headphone socket of the set.
You can listen to the sound through the headphone and the TV's
speakers. To adjust the headphone volume, press the Φ / Γ button
on the §Volume pull-down menu. See the 'Sound adjustment'
section.
S-VIDEOL/MN
Sound
AUDIO
R
AV4
SSM
{
Balance
{
AVL
{
DBS
{
§Volume
PCINPUT
{
3303(3I)
}{OOKOMENU
If you press the MUTE button, only the sound from the TV's speakers
switched off.
When a programme is received in dual language, you can select
a language (DUAL I, DUAL II or DUAL I+II) for the sound from
the headphone regardless of that from the TV's speakers. On
the §Volume pull-down menu, press the I/II button to select
the desired language; I, II or I II.
At this time if the set is in AV mode, the I/II button selects output
are
sound;LR,LLorRR,inturn.
30
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
31
Download PDF