LG | RT-37LZ30 | LG RT-37LZ30 Owner’s Manual

LCD
Colour Television
OWNER'S MANUAL
Please read this manual
carefully
before
operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
Model number
:
Serial number
:
P/NO
:
3828TUL284B
Printed in Korea
(0411-REV01)
and quote this
require service.
cover
information to your dealer when you
Contents
Installation
3
Location and function of controls
4
Communicator
Internal generator
charge
/ Front/Side
panel
/ Back
panel
Basic operation
On and off / Programme selection
Volume adjustment
Quick view / Mute function
On screen language selection (option)
8
ON SCREEN Menus
Menu selection
9
STATION Menu
10
Auto programme tuning
Manual programme tuning
Assigning a station name/Fine tuning
Programme edit
Favourite programme/Calling the programme table
PICTURE Menu
PSM (Picture Status
Picture adjustment
ACC/ XD
15
Memory)
SOUND Menu
SSM (Sound Status Memory)
Sound adjustment/SRS WOW
Stereo/Dual reception / NICAM
Sound output selection
TIMER menu
Clock / On/Off Time / Auto Off /
17
reception
20
Sleep
timer
SPECIAL Menu
22
Main Picture Source Selection
Child lock/Power Indicator/Transparency
Picture Size Zoom/Reset
SCREEN Menu
25
Picture format
adjustment /Clock and Phase
SCREEN Position
Manual Configure
Screen adjustments
Auto
Initializing (Reset to original factory value)
Selecting Wide XGA mode
YNR (Y-signal Noise Reduction) / Split Zoom
PIP/POP/PBP operation
PIP/POP/PBP mode / Input mode selection for sub
Sub Picture / Size Source
Image / Sound /Moving the sub Picture
Swap / Swapping between main and sub pictures
Program selection for sub picture
Teletext (option)
Switch on/off / SIMPLE text / TOP text
FASTEXT / Special teletext functions
32
(option)
Connection of external equipment
Aerial socket / Euro scart sockets
S-Video/Audio in sockets (S-Video)
PC in socket / Audio/Video in sockets
35
Displayable
37
External Control Device Setup
RS-232C input socket / D-Sub 9-pin male
Set ID / Communication Parameters
Command Reference List
Transmission/Receiving Protocol
38
Monitor Specification
RGB Mode / DVI Mode
Troubleshooting
2
28
picture
check list
43
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
a. Open the back panel cover.
b. After connecting the power cord to the set, connect the power
cord to an AC mains.
c.
Fix cables with the supplyed cable tie after collecting connected
cables.
d. Pull the cables through the hole on the set.
e. Close the back panel cover.
a/e
Warning
To
prevent fire
shock hazard, do not expose the set to rain or moisstrike the Active Matrix LCD with anything hard as
this may scratch, mar, or damage the Active Matrix LCD permanently.
or
ture. Do not rub
or
Service
Never
remove
the back
cover
of the set as this can expose you to
the set does not operate proper-
high voltage and other hazards. If
ly, unplug it and call your dealer.
b
Aerial
Connect the aerial cable to the socket marked +75 Ω on the back.
For the best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
If you intend to mount the TV to a wall, attach VESA standard mounting interface (optional parts) to the back of the TV. When you install
the set to
fully
so as
use
the wall
not to
mounting
bracket
(optional parts),
fix it
d
care-
drop.
Cleaning
Unplug the set before cleaning the face of the LCD Screen. Dust
the set by wiping the screen and the cabinet with a soft, clean cloth.
If the screen requires additional cleaning, use a clean, damp cloth.
Do not use liquid cleaners or aerosol cleaners.
On
Disposal
The fluorescent lamp used in this product contains a small amount
of mercury.
Do not dispose of this product with general household waste.
Disposal of this product mute be carried out in accordance to the
regulations of your local authority.
3
Location and function of controls
All the functions
Some functions
panel
can
can
be controlled with the Communicator.
also be
adjusted
from
standby
with the buttons
on
the side
of the set.
Communicator
1.
POWER
switches the set
Comunicatr
2.
on
or
off to
standby.
SOURCE
selects
TV, AV, S-Video, Component 1, Component 2
,
RGB PC, DVI PC modes.
3.
ARC
4.
PIP BUTTONS
(Aspect Ratio Control)
changes the picture format.
PIP/POP/PBP
REVEAL
SIZE
HOLD
UPDATE
?
813
MIX
TIME
INDEX
PSM
SSM
I/II
MODE
i
WIN.SIZE
switches the sub
17
M
Q.VIEW
10
4
PIP INPUT
selects the
2
WIN.SIZE
PBP
or
off modes.
input
picture.
mode for the sub
the sub picture size.
WIN POSITION
moves the sub picture to D / E
picture.
adjusts
RESET
POWER
,
picture.
alternates between main and sub
15
9
select PIP, POP
SWAP
WIN.POSIOTION SLEEP
16
picture
PIP PR +/selects a programme for the sub
TV/AV
SOURCE
ARC
3
1
PIP/POP/PBP
/ G direction.
or F
123
5.
LIST
7
14
456
7890
MENU
6.
EXIT
5
VOL
VOL
MUTE
TEXT
12
11
PR
(Programme Up/Down)
F / G (Volume Down/Up)
adjusts the volume.
adjusts menu settings.
OK
6
D / E
a menu.
selects a programme or a menu item.
switches the set on from standby.
18
PR
MENU
selects
OK
PIP PR
PIP PR
SWAP
accepts your selection
PIP INPUT
7.
(With TELETEXT)
4
or
NUMBER BUTTONS
switches the set on from
displays
standby
8.
PSM (Picture Status
recalls your preferred
9.
RESET
When Communicator does not
by pressing the reset point with
the current mode.
or
directly
select
a
number.
Memory)
picture setting.
work,
reset the Communicator
sharp
one.
Location and function of controls
10. I/II
selects the
language during
selects the sound
dual
language
broadcast.
output.
11. TELETEXT BUTTONS(option)
These buttons are used for teletext.
For further details,
see
12. MUTE
switches the sound
13. SSM
the 'Teletext' section.
on or
Comunicatr
off.
(Sound Status Memory)
preferred sound setting.
recalls your
14. LIST
displays
15. SLEEP
sets the
the programme table.
sleep
timer.
16. TV/AV
selects TV ,AV, S-video,
DVI PC mode.
component1, component2,
switches the set
standby.
on
from
RGB PC,
813
17
PSM
SSM
I/II
Q.VIEW
10
WIN.SIZE WIN.POSIOTION SLEEP
15
17. Q.VIEW
returns to the
selects
a
4
viewed programme.
favorite programme.
previously
2
16
9
18. EXIT
RESET
POWER
TV/AV
SOURCE
ARC
3
1
exits from each mode.
PIP/POP/PBP
Note
tons
:
In teletext mode, the PIP PR -/+, SWAP and PIP INPUT but7
used for teletext function.
are
123
LIST
14
456
789
Internal
generator charge
ator. To
1.
charge
waiting for
again
minute
In usual
5
or
one
->
18
be
In first use,
20 rotation of the handle in the
->
2.
can
EXIT
PR
5
charged with the internal electric gener6
the communicator do the followings;
The communicator
0
MENU
minute
->
20 rotation
OK
VOL
VOL
MUTE
arrow
direction
20 rotation
again
->
picture below
waiting for one
as
again ->
beginning to
12
PR
PIP PR
use
PIP PR
SWAP
PIP INPUT
use
6 rotation
->
resuming
to
use
Note : Do not rotate the handle too
communicator.
rapidly for
the
protection
of the
(Without TELETEXT)
5
Location and function of controls
Front / Side
panel
PR
6
VOL
5
OK
4
MENU
3
TV
2
AV
1
/
ON/OFF
8
7
1.
/l
(ON
/
2.
7.
OFF)
switches the set
on or
off.
illuminates red in
TV/AV
or
AV, monitor mode.
switches the set
on
from
(DPM Mode).
8.
4.
a menu.
OK
accepts your selection
or
displays
mode.
F / G
5.
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
6.
D / E
(Programme Up/Down)
selects
a program or a menu item.
switches the set on from standby.
6
mode.
standby.
MENU
selects
standby
illuminates green when the set is switched on.
illuminates amber in RGB PC/DVI PC mode
selects TV
3.
POWER/STANDBY INDICATOR
the current
REMOTE CONTROL SENSOR
Location and function of controls
Back
panel
S-VIDEO
RAUDIOL/MVE
S-VDEO
RAUDIOLMVE
A3
8
AV
COMPONENT1
RS-232C
OUT
DVI PC
REMOTE
AC IN
RGB PC
AV
OUT
COMPONENT2
PC AUDIO IN
(480i/576i)
CONTROL
LR
ANT IN
VIDEO
LR
AUDIO
RS-232C
VIDEO IN
N
1
2
3
AUDIO IN
5
4
7
6
1.
POWER CORD SOCKET
6.
AV OUT SOCKETS
2.
REMOTE CONTROL JACK
7.
AERIAL SOCKET
3.
RS-232C SERIAL PORTS
4.
DVI
connect the RF socket of the VCR to the
(Digital Visual Interface) PC / RGB PC /
PC AUDIO IN SOCKETS
connect the set
output
socket of the PER-
SONAL COMPUTER to this socket.
Note
:
function
jack for
This set is
only provided the DVI-D
although DVI jack drawing is DVI-I
connection convenience.
8.
AUDIO/VIDEO IN SOCKETS (AV)
Connect the audio/video out sockets of external
equipment
to these sockets.
S-VIDEO/AUDIO IN SOCKETS
Connect the video out socket of
(SAV)
an
S-VIDEO
VCR to the S-VIDEO socket.
Connects the audio out sockets of the SVIDEO VCR to the audio sockets
5.
aer-
ial socket.
as
in AV.
COMPONENT1(DTV, DVD), COMPONENT2
(DVD) IN SOCKETS
Connect the audio/video out sockets of exter
nal
equipment
to these sockets.
7
Basic
Operation
On and off
1.
2.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, TV/AV, D / E,
SOURCE, or NUMBER buttons on the communicator to switch
it
Com
SSM
I/II
Q.VIEW
on
fully.
3.
Press the POWER button on the communicator.
The set reverts to standby mode.
4.
Press the main power button
again
to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You
a
can
select
programme number with the D / E
or
NUMBER
buttons.
Volume
POWER
MULTIMEDIA
adjustment
Press the F / G button to
adjust
the volume.
123
Quick view
456
7890
Press the Q.VIEW button to view the last programme you
were
watching.
MENU
PR
only when Favorite programme is
Otherwise each press of this button will select a stored
favorite programme.
Note
OK
VOL
VOL
MUTE
:
This function works
set to Off
.
PR
SWAP
PIP INPUT
Mute function
Press the MUTE button. The sound is switched off and the
appears.
You can cancel it
On
screen
by pressing
language
the MUTE, F / G, I/II
selection
The
menu can be displayed on the
guage. First select your language.
1.
SSM button.
(option)
screen
in your desired lan-
Press the MENU button and then D / E button to select the
SPECIAL
2.
or
display
Press
menu.
the
G
button
and
then
D
/
E
button
to
select
Language.
3.
Press the G button and then the D
desired language.
All the
4.
8
on screen
displays
/ E button to select your
will appear in the selected
Press the MENU button to
save.
language.
On Screen Menus
The
an
dialogue
operator
between you and your set takes
place
on screen
with
menu.
Menu selection
Press the MENU button and then D / E button to
1.
display
each
menu.
Press the G button and then the D / E button to select
2.
a menu
Com
item.
3.
Repeatedly press
viewing.
Note
:
In the teletext
the MENU button to return to normal TV
mode,
menus are
not
displayed.
STATION
PICTURE
Auto programme
PSM
Manual programme
ACC
Programme edit
XD
Favourite programme
MENU
Prev.
STATION
Prev.
MENU
PICTURE
menu
PIP/POP/PBP
menu
SOUND
On/Off
SSM
Source
Balance
Size
AVL
MENU
PR
SRS WOW
Image
Sound
VOL
Position
Swap
PR
MENU
Prev.
PIP/POP/PBP
Prev.
MENU
SOUND
menu
SCREEN
TIMER
SPECIAL
ARC
Auto-configure
Input
Clock
Child lock
Off time
Clock
Phase
menu
Language
On time
Power indicator
Auto off
Position
Transparency
Zoom
Reset
E
MENU
Prev.
MENU
SCREEN
menu
MENU
Prev.
SPECIAL
menu
Prev.
TIMER
menu
9
STATION Menu
STATION
Auto programme
Manual programme
Programme edit
Favourite programme
Up to 100 (only china : 200) TV stations can be stored in this set by
programme numbers (0 to 99(only china :0 to 199)). Once you have
preset the stations, you will be able to use the D / E or NUMBER
buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
MENU
Prev.
STATION
tuning
All stations that can be received are stored by this method. It is recommended that you use auto program during installation of this set.
menu
Press the MENU button and then D / E button to select the
STATION menu.
Press the G button and then D / E button to select Auto
1.
2.
Com
Programme.
Press the G button. Select a TV system with the G button and
then D / E button on the System menu;
3.
System
BG
G
Storage from
I
Start
DK
M
MENU
BG
(Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK button.
Press the D / E button to select Storage from. And press the
G button. Select the beginning programme number with the D /
E button or NUMBER buttons on the Storage from menu.
Press the OK button.
Press the D / E button to select Start.
4.
5.
6.
7.
123
:
Prev.
456
7890
11
CO5
17%
MENU
PR
OK
VOL
VOL
Press the G button to begin auto programming.
All receivable stations are stored. The station name is stored for
stations which broadcast VPS (Video Programme Service),
PDC (Programme Delivery Control) or TELETEXT data. If no
station name can be assigned to a station, the channel number
is assigned and stored by a number as shown below.
8.
PR
AUSTRALIA
CHINA
ELSE
V/UHF
Cable
V/UHF
Cable
V/UHF
Cable
BG
1~75
2~44
1~69
1~47
1~69
1~47
I
1~69
1~47
1~69
1~47
1~69
1~47
DK
1~69
1~47
1~62
1~41
1~69
1~47
M
2~83
1~71
2~83
1~71
2~83
1~71
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
9.
10
Repeatedly
viewing.
press the MENU button to return to normal TV
STATION Menu
Manual programme
tuning
STATION
Auto programme
Manual programme
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name
Favourite programme
with five characters to each programme number.
Press the MENU button and then D
1.
Programme edit
STATION
/ E button to select the
menu.
MENU
Prev.
STATION
2.
Press the G button and then D / E button to select Manual pro-
3.
gramme.
Press the G button and then D / E button to select
G
System
menu
System.
Com
BG
Storage
I
Channel
DK
Name
M
Fine tune
Search
MENU
Select
4.
a
TV
Prev.
system with the
G button and then D / E button on
the
System menu;
: (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M : (USA/Korea/Philippines) (option)
BG
5.
Press the OK button.
6.
Press the D / E button to select
Storage.
And press the G but-
ton. Select the
button
or
beginning programme number with the D / E
NUMBER buttons on the Storage menu.
Press the OK button.
7.
123
456
7890
System
System
G
Storage
MENU
Storage
1
Channel
Channel
Name
Name
PR
G
V/UHF
1
OK
Fine tune
Fine tune
Search
Search
VOL
VOL
PR
MENU
8.
9.
Prev.
MENU
Prev.
Press the D / E button to select Channel.
Press the G button and then D / E button to select VHF/UHF
Cable
You
can
the Channel
or
Then press the G button.
select the desired channel number with the NUMBER
on
buttons. If
possible,
menu.
select the channel number
directly
with the
number buttons. Refer to page 10.
10. Press the OK button.
11. Press the D / E button to select Search.
12. Press the G button.
13. Press the OK button to store it.
14. To store another
15.
Repeatedly
viewing.
station, repeat steps 3
to 12.
press the MENU button to return to normal TV
11
STATION Menu
Assigning
STATION
a
station
name
Auto programme
Manual programme
1.
Programme edit
2.
Favourite programme
the 'Manual programme tuning' steps 1 to 2.
Press the G button and then D / E button to select Name.
Repeat
System
MENU
Storage
Prev.
Channel
STATION
Name
menu
G
C
01
Fine tune
Search
MENU
Com
Prev.
3.
Press the G button and then
4.
-,thenumber0to9andthealphabetAtoZ.
With the F button you can select in the opposite direction.
Select the position by pressing the F / G button and then
5.
your choice of the second character, and
Press the OK button to store it.
use
the D / E. You
can use a
blank,
+,
6.
Repeatedly
viewing.
Fine
1.
press the MENU button to return to normal TV
tuning
Normally
2.
make
so on.
fine
tuning
is
only
necessary if
reception
is poor.
the 'Manual programme tuning' steps 1 to 2.
Press the G button and then D / E button to select Fine tune.
Repeat
System
Storage
Channel
Name
OK
VOL
MENU
VOL
PR
GGG
Search
PR
12
G
Fine tune
MENU
Prev.
3.
Press the G button to fine tune for the best
4.
Press the OK button.
5.
Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will be indicated by yellow number
during programme selection.
picture
and sound.
STATION Menu
Programme
edit
STATION
Auto programme
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
copy a blank station data into the selected programme number.
1.
Press the MENU button and then
STATION
2.
Press
Favourite programme
D / E button to select the
menu.
the
G
Programme
3.
use
Manual programme
Programme edit
MENU
button
and
then
D
/
E
button
to
Prev.
select
STATION
edit.
Press the G button to
the
display
Programme
edit
menu
menu.
0C051C052C053C05
Com
4-----5-----6-----7----9-
-
-
-
-10C0511C0512C05
13C0514C0515-----16----16-----17-----18-----19----MENU
Deleting
1.
a
Prev.
Delete
Move
Copy
Skip
programme
SelectaprogrammetobedeletedwiththeD/EorF/Gbutton.
2.
Press the RED button twice.
The selected
grammes
are
programme is deleted,
shifted up one position.
all the
following
pro-
Copying a programme
1. SelectaprogrammetobecopiedwiththeD/EorF/Gbutton.
2.
Press the GREEN button.
All the
following
programmes
are
shifted down
one
position.
Moving a programme
1. SelectaprogrammetobemovedwiththeD/EorF/Gbutton.
MENU
2.
Press the YELLOW button.
3.
Move the programme to the desired programme number with
theD/EorF/Gbutton.
4.
Press the YELLOW button
again
/ G
VOL
VOL
to release this function.
PR
programme number
Select a programme number to be
Skipping
1.
PR
a
skipped
with the D
/ E or F
button.
2.
Press the BLUE button. The
3.
Press the BLUE button
skipped programme turns to
again to release the skipped
gramme.
When a programme number is
unable to select it
using
skipped
the D
/ E
it
blue.
pro-
that you will be
during normal TV
means
button
If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
viewing.
select it in the programme edit
Repeatedly
or
table
menu.
press the MENU button to return to normal TV
viewing.
13
STATION Menu
Favourite programme
STATION
Auto programme
This function lets you select your favourite programmes
Manual programme
Programme edit
1.
Favourite programme
2.
directly.
Press the MENU button and then D / E button to select the
STATION menu.
Press the G button and then D / E to select Favourite programme.
MENU
Prev.
ON
STATION
menu
Com
3.
4.
5.
6.
7.
Q.VIEW
--
-----
--
-----
--
-----
--
-----
--
-----
--
-----
--
-----
--
-----
Press the G button and then F / G button to select On
Press the D / E button to select
-----.
Select a desired programme with the F / G button.
To store another programme, repeat steps 4 to 5.
You can store up to 8 programmes.
Press the MENU button to return to normal TV viewing.
or
Off.
--
Repeatedly press
the Q.VIEW button to select stored favourite pro-
grammes.
Calling
You
the programme table
check the programmes stored in the memory
the program table.
can
by displaying
table
Press the LIST button to display the Programme table
The programme table appears on the screen.
Displaying program
menu.
PROGRAMME LIST
LIST
0C051C052C053C05
4-----5-----6-----7----MENU
9-
-
-
-
-10C0511C0512C05
PR
13C0514C0515-----16----16-----17-----18-----19-----
OK
VOL
VOL
PR
Note :
a.
You may find some blue highlighted programmes shown. They
have been set up in the program edit mode.
b. Some programmes with the channel number shown in the program table indicate there is no station name assigned.
a programme in the programme table
Select a programme with the D / E or F / G button.
Then press the OK button.
Selecting
The set switches to the chosen programme number.
Paging through
There
are
grammes.
Pressing the D
Repeatedly
14
a
programme table
10 programme table pages in which contain 199 pro/ E or F / G
button
repeatedly
turns the pages.
press the MENU button to return to normal TV
viewing.
PICTURE Menu
PSM
(Picture Status Memory)
PICTURE
PSM
1.
Press the MENU button and then D
2.
/ E
button to select the PIC-
ACC
XD
TURE
menu.
Press the G button and then D
/ E
button to select PSM.
PICTURE
G
PSM
Dynamic
ACC
Standard
XD
Mild
Prev.
MENU
PICTURE
Game
menu
User
3.
ting
4.
on
the PSM
picture
set-
menu.
Press the MENU button to
save.
a desired picture (Dynamic, Standard, Mild,
User) with PSM button on the remote control. The picture
Dynamic, Standard, Mild and Game are programmed for optimum
picture reproduction at the factory and cannot be changed.
You
also recall
can
Game
or
Picture
You
can
ness
1.
Com
Prev.
MENU
Press the G button and then D / E button to select a
PSM
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC only) to the levels you prefer.
and tint
Press the MENU button and then D
PICTURE
/ E
button to select the
menu.
2.
Press the G button and then D
/ E
3.
Press the G button and then D
/ E
button to select PSM.
button to select User.
PICTURE
PSM
G
MENU
Dynamic
ACC
Standard
XD
Mild
Contrast
Game
Brightness
User
PR
VOL
VOL
Color
Sharpness
PR
Tint
MENU
Prev.
Contrast
4.
100 FG
Press the F button and then D
/ E
button to select the desired
picture option. (Contrast, Brightness, Color, Sharpness
and
Tint)
5.
Press the F
6.
Press the MENU button to
/ G
button to make
appropriate adjustments.
save.
15
PICTURE Menu
ACC
PICTURE
PSM
To initialize values
ACC
XD
1.
to default
settings),
Press the MENU button and then D
PICTURE
MENU
(reset
select the Normal
option.
2.
Prev.
PICTURE
/ E
button to select the
menu.
/ E
Press the G button and then D
button to select ACC.
PICTURE
menu
PSM
Warm
ACC
Normal
G
XD
Cool
Com
MENU
3.
Press the G
Nomal
4.
button and then D
/ E
button to select
Press the MENU button to
XD is LG Electronic's
real HD
play
ing algorithm.
a
XD Demo
1.
-
save.
source
unique picture improving technology to disthough an advanced digital signal process-
Use to see the difference between XD Demo On and
XD Demo Off.
Press the MENU button and then D
PICTURE
/ E
Press the G button and then D
/ E
button to select XD.
3.
Press the G button and then D
/ E
button to select Off
XD Demo.
PR
PICTURE
OK
PSM
VOL
ACC
XD
G
Off
On
PR
XD Demo
MENU
4.
Prev.
Press the MENU button to
Press the EXIT button to
16
button to select the
menu.
2.
EXIT
VOL
Warm,
Cool.
or
XD
WIN.POSIOTION
MENU
Prev.
save
Off
or
On.
stop XD Demo.
,
On
or
SOUND Menu
SSM
(Sound Status Memory)
SOUND
SSM
Balance
You
can
Speech
1.
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of equalizer.
Press the MENU button and then D
SOUND
/ E
AVL
SRS WOW
button to select the
menu.
MENU
SOUND
Prev.
SOUND
menu
Flat
G
SSM
Balance
Music
AVL
Movie
SRS WOW
Speech
User
MENU
2.
Press the G button and then D
3.
Press the G button and then D
ting
on
Sound
the SSM
Com
Prev.
/ E
/ E
button to select SSM.
button to select
a
sound set-
menu.
Frequency Adjustment
Press the OK button in User.
a.
SSM
Equalizer
0.1
0.5
1.0
5 .0
10.0
Khz
Prev.
MENU
b. Select
Make
c.
a
sound band
appropriate
by pressing
the F / G button.
sound level with the D / E button.
d. Press the OK button to store it for the sound User.
4.
Press the MENU button to
MENU
save.
PR
You
can
also recall
a
desired sound
setting (Flat, Music, Movie,
with SSM button
Speech
User)
sound settings Flat, Speech, Movie
for optimum sound reproduction at
changed.
or
Note
ment
:
on
and Music
the
OK
VOL
VOL
the communicator. The
factory
are
programmed
PR
and cannot be
If you press the SSM button after making appropriate adjustthe User sub menu, the display User automatically
on
appears
even
though
Flat, Music, Movie
you have
or
already set a factory preset setting;
Speech.
17
SOUND Menu
Sound
SOUND
SSM
You
adjustment
adjust balance, AVL (Auto
ically keeps on an equal volume
Balance
AVL
SRS WOW
can
Volume Leveler). AVL automatlevel even if you change pro-
grammes.
1.
Press the MENU button and then D / E button to select the
SOUND menu.
SOUND
MENU
Prev.
Off
SSM
SOUND
Balance
menu
On
AVL
G
SRS WOW
Com
MENU
2.
3.
4.
Prev.
Press the G button and then D / E button to select the desired
sound item; AVL or Balance.
Balance : Make desired adjustment with the F / G and then
press the OK button.
AVL : Press the D / E button to select On or Off.
Press the MENU button to save.
SRS WOW
The SRS WOW function plays back the mono or stereo sound input
with the dynamic surround effects. It will provide rich and profound
sound tone. If you set the SRS WOW on, user audio setting can not
be adjusted.
1.
Press the MENU button and then D
SOUND
2.
/ E
button to select the
menu.
Press the G button and then D
/ E
button to select SRS WOW.
SOUND
Off
SSM
MENU
Balance
PR
On
AVL
SRS WOW
G
OK
VOL
VOL
PR
MENU
3.
Press the G button and then D
4.
Press the MENU button to
is
a
is
/ E
button to select On
or
Off.
save
trademark of SRS
technology
18
Prev.
Labs, Inc.
incorporated
under license from SRS
Labs, Inc.
SOUND Menu
Stereo/Dual
reception
SOUND
SSM
When
a program is selected, the sound information for the station
appears after the program number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Balance
AVL
SRS WOW
Display
MENU
Prev.
SOUND
menu
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button
twice again.
Com
selection for dual language broadcast
If a program received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II but-
Language
ton
repeatedly.
DUAL I sends the
primary
broadcast
to the
language
loudspeak-
I/II
ers.
DUAL II sends the
secondary
broadcast
language
to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
When
NICAM mono is received, you can
MONO or FM MONO.
When NICAM stereo is received, you can
STEREO or FM MONO. If the stereo signal is
FM mono.
When NICAM dual is received, you can select
I, NICAM DUAL II or NICAM DUAL I+II or
select NICAM
select NICAM
weak, switch to
NICAM DUAL
MONO.
Sound output selection
In Component1, Component2 mode, you
the left and
can
select
output sound for
right loudspeakers.
press the I/II button to select the sound output.
Audio signal from audio L input is sent to the left loud
Repeatedly
L+R
:
L+L
:
R+R
:
speaker and audio signal from audio R input is sent to the
right loud speaker.
Audio signal from audio L input is sent to left and right loudspeakers.
Audio signal from audio R input is sent to left and right loudspeakers.
19
TIMER Menu
Clock
TIMER
Clock
You must set the time
Off time
correctly
before
on/off time function.
using
On time
1.
Auto off
2.
Press the MENU button and then D / E button to select the
TIMER menu.
Press the G button and then D / E button to select Clock.
TIMER
MENU
Prev.
TIMER
Clock
G
Off time
menu
Time
On time
:56
1
:
AM
Auto off
Com
Prev.
MENU
3.
4.
5.
6.
Press the G button and then D / E button to adjust the hour.
Press the G button and then D / E button to adjust the minute.
Press the G button and then D / E button to select AM or PM.
Press the MENU button to
save.
On/Off time
The off timer
set time.
1.
2.
automatically
switches the set to
standby
at the pre-
Press the MENU button and then D / E button to select the
TIME menu.
Press the G button and then D / E button to select Off time or
On time.
TIMER
Clock
Off time
Time
On time
G
Auto off
__
__
:
Pr.
Volume
MENU
MENU
3.
4.
5.
PR
VOL
VOL
__
AM
__
__
__
__
__
Off
Prev.
Press the G button and then D / E button to adjust the hour.
Press the G button and then D / E button to adjust the minute.
Press the G button and then D / E button to adjust the morn-
ing(AM)or afternoon(PM).
6.
PR
7.
Press the G button and then D / E button to select On or Off.
To cancel Off/On time function, press the D / E button to
select Off.
Only On Time function; Press the G button and then D / E
button to adjust volume level and then press the G button and
then D / E button to select the programme at turn-on
Press the MENU button to save.
.
8.
Note :
a.
In the event of power interruption (disconnection or power failure), the clock must be reset.
b.
Two hours after the set is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
c.
Once the on or off time is set, these functions operate daily at
the preset time.
d. Off Time function overrides On Time function if they are set to
the same time.
e.
The set must be in standby mode for the On Time to work.
20
TIMER Menu
Auto off
TIMER
Clock
Off time
If you select On on the Auto off menu, the set will automatically
switch itself to standby mode approximately ten minutes after a TV
station
1.
On time
Auto off
stops broadcasting.
Press the MENU button and then D
TIMER
/ E
button to select the
MENU
menu.
2.
Press the G button and then D
/ E button to select Auto off.
3.
Press the G button and then D
/ E
button to select On
or
Prev.
TIMER
menu
Off.
TIMER
Off
Clock
Com
On
Off time
On time
Auto off
MENU
4.
G
Prev.
Press the MENU button to
Sleep
save.
timer
SLEEP
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
preset time has elapsed.
Press the SLEEP button to select the number of minutes. The dis-
play
'
0 MIN' will appear
on
the screen, followed by 10, 20, 30,
to count down from the
60, 90, 120, 180 and 240. The timer begins
number of minutes selected.
Note
a.
:
To view the
remaining sleep time,
press the SLEEP button
once.
b.
To cancel the
until the
c.
sleep time, repeatedly press
0 MIN' appears.
display
the SLEEP button
When you switch the set off, the set releases the
MENU
PR
'
preset sleep
VOL
time.
PR
21
SPECIAL Menu
Main Picture Source Selection
SPECIAL
Input
Child lock
Inputs
Language
Power indicator
can
be set for TV ,AV, S-Video,
Component1, Component2,
RGB PC, DVI PC mode. AV mode is used when a video cassette
recorder (VCR), or other equipment is connected to the set.
Transparency
Zoom
Reset
E
MENU
Note
Prev.
SPECIAL
menu
:
When
a
VCR is connected via the aerial socket the set is
used in TV mode. See the 'Connection of external
equipment' sec-
tion.
1.
Com
Press the MENU button and then D / E button to select the
SPECIAL
menu.
2.
Press the G button and then D / E button to select
3.
Press the G button and then D / E button to select TV
Input.
,AV, S-
Video, Component1, Component2, RGB PC, DVI PC.
SPECIAL
TV
G
Input
AV
Child lock
S-Video
Language
Component1
Power indicator
Component2
Transparency
RGB PC
Zoom
DVI PC
Reset
E
MENU
Prev.
AV: VCR connected to the RCA
TV/AV
jack
on
the side
pannel.
S-VIDEO VCR connected to the S-VIDEO sockets
S-Video
:
the side
panel
Commonent1
on
set
:
DTV connected to the
Component
1 sockets
DVD connected to the
Component 2 (480i, 576i)
on
the back of set.
Commonent2
sockets
on
:
the back of set.
RGB PC: PC connected to the RGB socket
MENU
DVI PC: PC connected to the DVI socket
PR
4.
Press the MENU button to
on
on
the set
the set
save.
OK
VOL
You
PR
can select the
Inputs can be
Component1, Component2, RGB PC,
set
for TV,
AV, S-Video,
DVI PC mode
by pressing
the TV/AV button.
In AV,
S-Video, Component1, Component2, RGB PC, DVI PC
mode, press the D / E or NUMBER buttons to return to TV mode.
22
SPECIAL Menu
Child lock
SPECIAL
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
Input
Child lock
Language
Power indicator
1.
2.
Press the MENU button and then D / E button to select the
SPECIAL menu.
Press the G button and then D / E button to select Child
lock.
SPECIAL
Transparency
Zoom
Reset
E
MENU
Prev.
SPECIAL
menu
Input
Child lock
Off
G
Language
On
Power indicator
Com
Transparency
Zoom
Reset
E
Prev.
MENU
3.
4.
Press the G button and then D / E button to select Off
Press the MENU button to save.
or
On.
With the lock on, the display Controls locked appears on the
screen if any button on the side panel is pressed while viewing the
TV.
WIN.POSIOTION
Power indicator
Use this function to set the power indicator on the front side of the
or OFF. If you set OFF, it will go off after 15 seconds. If
TV to ON
you set ON at any time, the power indicator will
turned on.
1.
Press the MENU button and then D
SPECIAL
/ E
automatically
button to select the
menu.
/ E
2.
Press the G
3.
indicator.
Press the G button and then D / E button to select On
Press the MENU button to save.
4.
be
button and then D
button to select Power
or
Off.
MENU
EXIT
PR
Transparency
To
1.
adjust
the
Press
VOL
menu screen.
Press the MENU button and then D / E
SPECIAL
2.
OK
transparency of the OSD
button to select the
VOL
PR
menu.
the
G
button
and
D
then
/
E
button
to
select
Transparency.
SPECIAL
Input
Child lock
Language
0
Power indicator
G
Transparency
Zoom
Reset
E
MENU
3.
4.
Press the G
button and then press the
F / G button to make
appropriate adjustments.
Press the MENU button to
Note :
The
.
Prev.
adjustment
range of
save.
Transparency
is 0~100.
23
SPECIAL Menu
Picture Size Zoom
SPECIAL
Input
Child lock
Use this function to
Language
in the
zoom
When you turn the TV off and
be restored.
Power indicator
Transparency
screen.
on
again,
the default
screen
size will
Zoom
1.
Reset
MENU
Press the MENU button and then D / E
SPECIAL
E
button to select the
menu.
Prev.
2.
SPECIAL
Press the G button and then D / E button to select Zoom
.
menu
SPECIAL
Zoom
0
Input
H Position
0
Child lock
V Position
0
Language
Com
Power indicator
Transparency
Zoom
G
Reset
E
MENU
3.
Press the G button
Prev.
and then D / E
Press the F / G button to
4.
Press the D / E
larged picture
5.
button to to
:
If the
zooming
tioning
adjust
the
or
picture
size.
V Position.
picture position
while in
mode.
Press the MENU button to
Note
reduce the
button to select H Position
Press the F / G
WIN.POSIOTION
enlarge
button to select Zoom.
or
save.
value is set to
cannot be
'0', vertical and horizontal posi-
adjusted.
Reset
Use this function to reset the set to the
language
MENU
factory
default. However,
selection will not be initialized.
EXIT
1.
PR
Press the MENU button and then D / E
button to select the
SPECIAL menu.
OK
VOL
VOL
2.
Press the G button and then D / E button to select Reset.
PR
SPECIAL
Input
Child lock
To set
Language
Power indicator
Transparency
Zoom
G
Reset
E
MENU
3.
Press the G button to start Reset.
4.
Repeatedly
viewing.
Note
24
Prev.
:
press the MENU button to return to normal TV
This function
operates in every mode.
SCREEN Menu
Picture format
SCREEN
ARC
You can watch TV in various
Zoom1 and Zoom2.
picture formats;Full, 4:3, Spectacle,
Auto-configure
Clock
Phase
1.
2.
Press the MENU button and then D / E button to select the
SCREEN menu.
Press the G button and then D / E button to select ARC.
Position
MENU
Prev.
SCREEN
Full
G
ARC
SCREEN
4:3
Auto-configure
Spectacle
Clock
Zoom1
Phase
Zoom2
menu
Position
MENU
3.
4.
Com
Prev.
Press the G button and then D
desired picture format.
Press the MENU button to save.
/ E
button
You can also select Full, 4:3, Spectacle, Zoom1
the ARC button on the communicator.
to select your
or
Zoom2 with
Full
When your TV receives the wide screen signal, it will lead you to
adjust the picture horizontally or vertically, in a linear proportion, to
fill the entire screen fully.
4:3
It will lead you to view a picture with an original 4:3 aspect ratio,
with gray bars appearing at both the left and right sides.
ARC
Spectacle
When your TV receives the wide screen signal, it will lead you to
adjust the picture horizontally, in a linear proportion, to fill the entire
screen.
Zoom1
Choose Zoom1 when you want to view the picture without any
alteration. However, the top and bottom portions of the picture will
be cropped.
MENU
PR
VOL
Zoom2
Choose Zoom2 when you want the picture to be altered,both vertically extended and cropped. The picture taking a halfway trade
off between alteration and screen coverage.
Note :
a.
In PIP/POP/PBP mode, ARC function isn't available.
b. In RGB, DVI modes, you can olny select 1:1 and Full
PR
screen.
25
SCREEN Menu
Auto
SCREEN
ARC
adjustment (RGB [PC]
Automatically adjusts picture position
Auto-configure
1.
Clock
Phase
2.
Position
mode
only)
and minimizes
image shaking.
Press the MENU button and then D / E button to select the
SCREEN menu.
Press the G button and then D / E button to select Auto
-
Configure.
SCREEN
MENU
Prev.
ARC
Auto-configure
SCREEN
G
To Set
Clock
menu
Phase
Position
Com
Prev.
MENU
3.
4.
Press the G button to start Auto-configure.
If the position of the image is still not correct, try Auto adjustment again.
Repeatedly press the MENU button to return to normal TV
viewing.
Clock and Phase
(RGB [PC]
mode
only)
If the picture isn't clear after auto adjustment and especially that
characters are still trembling, adjust the picture phase manually. To
correct the screen size, adjust Clock.
WIN.POSIOTION
1.
2.
3.
Press the MENU button and then D / E button to select the
SCREEN menu.
Press the G button and then D / E button to select Clock or
Phase.
Press the G button and then press the F / G button to make
appropriate adjustments.
SCREEN
ARC
Auto-configure
Clock
G
50
Phase
Position
MENU
EXIT
PR
MENU
OK
VOL
4.
PR
26
Prev.
VOL
Press the MENU button to
Note :
a.
The
b.
The
adjustment
adjustment
save.
range of Phase is 0~100.
range of Clock is 0~100.
SCREEN Menu
SCREEN Position
(RGB [PC]
mode
only)
SCREEN
ARC
1.
Press the MENU button and then D
SCREEN
2.
/ E
button to select the
Auto-configure
Clock
menu.
Phase
Press the G button and then D / E button to select Position.
Position
SCREEN
ARC
MENU
Auto-configure
F
Phase
MENU
3.
G
SCREEN
E
Position
Prev.
D
Clock
menu
G
Horizontal
50
Vertical
47
Com
Prev.
Press the G button and then D / E
is achieved.
or
F / G button until desired
position
4.
Press the MENU button to
save.
WIN.POSIOTION
MENU
EXIT
PR
OK
VOL
VOL
PR
27
PIP/POP/PBP
operation
PIP/POP/PBP mode
PIP/POP/PBP
On/Off
1.
Source
Size
2.
Image
Sound
Press the MENU button and then D / E button to select the
PIP/POP/PBP menu.
Press the G button and then D / E button to select On/Off.
PIP/POP/PBP
Position
Swap
On/Off
Prev.
MENU
PIP/POP/PBP
menu
G
Off
Source
PIP
Size
POP
Image
PBP
Sound
Position
Swap
MENU
Com
3.
4.
Prev.
Press the G button and then D / E button to select
POP or PBP.
Press the MENU button to save.
PIP
After
the
selecting PIP
following menu
in the PIP On/Off menu,
items can be adjusted.
POP
After
in the POP On/Off
menu, the
menu
selecting POP
following
adjusted.
WIN.SIZE
Off, PIP,
items
can
be
PBP
selecting PBP
following
adjusted.
PIP/POP/PBP
After
in the PBP On/Off
menu, the
menu
You can also select PIP, POP, PBP
button on the communicator.
or
items
can
be
Off with the PIP/POP/PBP
Sub Picture Size
MENU
To
adjust the size of the
Large / PBP : Full, 4:3)
PR
VOL
1.
2.
3.
PR
PIP/PBP
screen.(PIP
:
Small, Medium,
Press the MENU button and then D / E button to select the
PIP/POP/PBP menu.
Press the G button and then D / E button to select Size.
Press the G button and then D / E button to adjust the sub picture size.
PIP INPUT
PIP/POP/PBP
Small
On/Off
Medium
Source
Size
G
Large
Image
Sound
Position
Swap
MENU
Prev.
Press the MENU button to save.
You can also adjust this function with the WIN.SIZE button
communicator.
4.
28
on
the
PIP/POP/PBP
operation
Source
PIP/POP/PBP
On/Off
Source
To select
input signal
an
for PIP/POP/PBP.
Size
be set for TV ,AV, S-Video, Component1, Component2,
RGB PC, DVI PC mode. AV mode is used when a video cassette
recorder (VCR), or other equipment is connected to the set.
Inputs
Image
can
Sound
Position
Swap
MENU
Note
:
When
a
VCR is connected via the aerial socket the set is
used in TV mode. See the 'Connection of external
equipment' sec-
Prev.
PIP/POP/PBP
menu
tion.
1.
Press the MENU button and then D / E button to select the
PIP/POP/PBP
2.
Com
menu.
Press the G button and then D / E button to select Source.
PIP/POP/PBP
TV
On/Off
Source
AV
G
Size
S-Video
Image
Component1
Sound
Component2
Position
RGB PC
Swap
DVI PC
WIN.SIZE
MENU
3.
Prev.
Press the G button and then D / E button to select TV
,AV, SVideo, Component 1, Component 2, RGB PC, DVI PC.
AV: VCR connected to the RCA
S-Video
the back
jack
on
the side
pannel.
S-VIDEO VCR connected to the S-VIDEO sockets
:
panel
Commonent1
:
on
set
DTV connected to the
Component1
sockets
on
DVD connected to the
Component2
sockets
on
the back of set.
Commonent2
:
the back of set.
RGB PC: PC connected to the RGB socket
on
the set
MENU
DVI PC: PC connected to the DVI socket
4.
Press the MENU button to
on
the set
PR
save.
VOL
<Table of PIP/POP/PBP Function
Main Screen
PR
TV
AV
TV
X
X
X
X
X
AV
X
X
X
X
X
Sub-Screen
S-Video COMPONENT1 COMPONENT2 RGB-PC
S-Video
X
X
X
X
X
COMPONENT 1
X
X
X
X
X
COMPONENT 2
X
X
X
X
X
DVI-PC
PIP INPUT
X
RGB-PC
DVI-PC
You
can
also
VOL
Support>
X
adjust
this function with the PIP INPUT button
on
the
communicator.
29
PIP/POP/PBP
operation
Image
PIP/POP/PBP
On/Off
To
Source
1.
Size
Image
Sound
2.
Position
adjust
the
image
of the PIP/POP/PBP screen;
Press the MENU button and then D / E button to select the
PIP/POP/PBP menu.
Press the G button and then D / E button to select Image.
Swap
PIP/POP/PBP
MENU
Prev.
PIP/POP/PBP
menu
On/Off
Contrast
Source
Brightness
Size
Color
64
Tint
50
G
Image
100
64
Sound
Position
Swap
Com
MENU
3.
Prev.
Press the G button and then D / E button to select Contrast
or Tint (NTSC only).
Press the F / G button to make appropriate adjustments
Press the MENU button to save.
,
Brightness,Color
4.
5.
Note
:
When PIP
input
source,
only
Color and Tint is TV mode.
Sound
To turn the PIP/POP/PBP sound on/off
WIN.POSIOTION
1.
2.
Press the MENU button and then D / E button to select the
PIP/POP/PBP menu.
Press the G button and then D / E button to select Sound.
PIP/POP/PBP
On/Off
Off
Source
On
Size
Image
Sound
G
Position
Swap
MENU
MENU
EXIT
PR
OK
VOL
VOL
PR
3.
4.
Press the G button and then D / E button to select On
Press the MENU button to save.
Moving
To
1.
2.
Prev.
adjust
or
Off.
the sub Picture
the
position
to PIP
screen.
Press the MENU button and then D / E button to select the
PIP/POP/PBP menu.
Press the G button and then D / E button to select Position.
PIP/POP/PBP
On/Off
Source
Size
Image
Sound
Position
G
Swap
3.
4.
Press the G button and then D / E button until desired
tion is achieved.
The sub picture moves up/down or left/right.
Press the MENU button to save.
You can also adjust this function with WIN.POSITION button
communicator
30
posi-
on
the
PIP/POP/PBP
operation
Swap
PIP/POP/PBP
On/Off
To switch the main-screen and sub-screen in PIP/POP/PBP mode.
Source
Size
1.
Press the MENU button and then D / E
PIP/POP/PBP menu.
button to select the
Image
Sound
Position
Swap
PIP/POP/PBP
To set
On/Off
MENU
Prev.
Source
Size
PIP/POP/PBP
menu
Image
Sound
Position
Swap
MENU
G
3.
Press the G button and then D / E button to select Swap.
Press the G button to switch the main-screen and sub-screen.
4.
Press the MENU button to
2.
Com
Prev.
save.
SWAP
PIP
SWAP
POP
SWAP
PBP
Press the SWAP button to
exchange
the main and sub
pictures.
MENU
Program
selection for sub
PR
picture
The sub
picture program selection is available when the sub picture
is TV mode. Press the PIP PR -/+ buttons to select a program for
the sub
VOL
VOL
PR
picture.
PIP PR
PIP PR
SWAP
31
Teletext
Teletext
(or
(option)
TOP
with the teletext
Teletext is
a
text)
is
system
an
can
optional function,
free service broadcast
up-to-the-minute
grammes, share
information
prices
on
Com
systems.
by
SIMPLE
allowing quick
a
set
can
gives
weather, television pro-
topics.
support the SIMPLE, TOP and
(standard teletext)
ber of pages which are selected by directly
sponding page number. TOP and FASTEXT
methods
only
most TV stations which
news,
and many other
The teletext decoder of this TV
FASTEXT
therefore
receive the teletext broadcast.
consists of
entering
are
a num-
the
more
corre-
modern
and easy selection of teletext information.
Switch on/off
M
Press the TEXT button to switch to teletext.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time
the
are
displayed
headline. The first page number indicates your selecwhile
the
second shows the current page displayed.
tion,
Press the TEXT button to switch off teletext. The previous mode
on
screen
reappears.
SIMPLE text
Page
123
1.
456
789
0
MENU
PR
2.
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the
lowing
TEXT
PR
preceding
or
fol-
page.
Programming
a
colour button in LIST mode
If the TV is in SIMPLE text, TOP text
M button to switch to LIST mode.
or
FASTEXT mode, press the
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the communicator handset.
1.
Press
a
2.
Using
the NUMBER buttons, select the page you wish to pro-
3.
gramme.
Press the OK button. The selected page is stored as the selected page number, blinking once to confirm this. From now on,
4.
32
coloured button.
you can select this page with the
The three other coloured buttons
same
are
coloured button.
programmed
in this way.
Teletext
TOP text
The
user
(option)
(option)
guide displays
the bottom of the
four fields-red, green, yellow and blue at
The yellow field denotes the next group
screen.
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with auto-
Com
matic overflow to the next block.
3.
With the green button you can proceed to the next
page with automatic overflow to the next group.
the D button
Alternatively
4.
The
red
button
the E button
Alternatively
can
to
permits
can
existing
be used.
return
to
previous
selection.
be used.
i
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
Page
selection
1.
Press the
2.
You
can
456
7890
button to select the index page.
select the pages which are colour coded
i
tom line with the
3.
123
same
along
the bot-
PR
coloured buttons.
Corresponding to the SIMPLE
page by entering its three digit
teletext mode, you can select a
page number with the NUMBER
PR
buttons in FASTEXT mode.
4.
The D / E button
lowing
can
be used to select the
preceding
or
fol-
page.
33
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
Com
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
REVEAL
SIZE
UPDATE
HOLD
?
MIX
Press this
page.
Press this button
TIME
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays
the TV
picture
teletext page. The
left hand corner of the
new
available then
on
the
screen
display
screen.
will
display
while
waiting
for the
will appear at the top
When the updated page is
change
to the page
num-
ber.
Press this button to view the
123
456
7890
PR
updated
teletext page.
HOLD
Stops
the automatic page
text page consists of 2
change
which will
occur
if
a
tele-
sub pages. The number of
sub pages and the sub page displayed is, usually, shown
on the screen below the time. When this button is pressed
or more
the
stop symbol is displayed
the
screen
at the
top left-hand
corner
of
and the automatic page change is inhibited.
To continue press this button again.
PR
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
picture
off press this button
again.
TIME
When
viewing
a
the time at the
this button
TV programme, press this button to display
corner of the screen. Press
top right hand
again
to
remove
the
display.
In the teletext
mode, press this button to select a sub page number. The
sub page number is displayed at the bottom of the screen.
To hold
D / E
change the sub page, press the RED / GREEN,
NUMBER buttons.
or
or
Press this button
34
again
to exit this function.
Connection of external
You
can
connect additional
equipment,
such
as
equipment
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
Aerial socket
1.
Connect the RF out socket of the VCR to the aerial socket
on
the back of the set.
2.
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
4.
stored.
5.
Press the PLAY button
DVD
1.
input
on
VCR
the VCR.
sockets
Connect the DVD output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y
Y PB PR) of the DVD to the COMPONENT 1,2 IN sockets (Y
or
PB
PR)
of the set.
2.
Connect the audio cable from the DVD to DVD INPUT AUDIO
sockets of the set.
3.
Press the TV/AV or SOURCE button to select Component
Press the PLAY button on the DVD.
The DVD playback picture appears on the screen.
4.
Note
a.
b.
1, 2.
DVD
Player
:
Component1
Component2
:
:
DTV
DVD
,
DVD
source
source.
DTV in sockets
1.
Connect the SET TOP
ets
2.
(Y
PB
PR)
outputs
to the COMPONENT1 IN sock-
of the set.
Connect the audio cable from the SET TOP to the AUDIO sockets of the set.
3.
Press the TV/AV
or
SOURCE button to select Component1.
Receriver
35
Connection of external
equipment
S-Video/Audio in sockets
(S-Video)
S-VIDEO
When
RAUDIOL/MVE
connecting
picture quality will
1.
an
S-VIDEO VCR to the S-VIDEO socket, the
be further
improved.
Connect the S-Video socket of the VCR to the S-VIDEO sock-
AV
et of the set.
2.
Connect the audio cable from the S-VIDEO VCR to the AV /
AUDIO L/R sockets of the set.
S-VIDEO VCR
3.
Select S-Video
4.
Press the PLAY button
The VCR
by pressing
on
the TV/AV button
repeatedly.
the VCR.
playback picture
appears
on
the
screen.
PC in socket
1.
Connect the
signal
cable from the TV
output socket of the PER-
SONAL COMPUTER to the RGB PC IN
or
DVI PC IN socket of
the set.
2.
Connect the audio cable from the PC to the AUDIO INPUT
sockets of the set.
PERSONAL COMPUTER
3.
Press the SOURCE
or
TV/AV button to select RGB PC
or
DVI
PC.
4.
Switch
on
The set
the PC, and the PC screen appears
be operated as the PC monitor.
on
the set.
can
Apple macintosh, connect the VGA desktop
row 15 pin to 2 row 15 pin with the
(not supplied)
signal cable and connect the VGA desktop block to the Macintosh.
Note
:
If you have
block
S-VIDEO
from the 3
Audio/Video in sockets
RAUDIOL/MVE
AV
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
2.
3.
Press the TV/AV button to select AV.
Press the PLAY button
The VCR
VCR
36
an
on
playback picture
the VCR.
appears
on
the
screen.
: If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
Note
Displayable
Monitor
Specification
RGB Mode
Horizontal
Vertical
MODE
Resolution
Frequency
(KHz)
Frequency
(Hz)
1
640x350
31.47
70.80
(Synchronization input
Note
a.
2
form
:
separate)
:
If the set is cold, there may be a small "flicker"
when the set is switched on. This is normal,
31.47
70.80
31.47
59.94
37.50
75.00
nothing wrong with the set.
possible, use the 1,360x768@60Hz video
mode to obtain the best image quality for your
5
43.27
85.00
LCD monitor. If used under the other resolutions,
some scaled or processed pictures may appear
6
37.88
60.32
720x400
there is
3
4
640x480
b.
If
on
7
800x600
8
9
832x624
10
46.88
75.00
53.67
85.06
49.73
74.55
48.36
60.00
85Hz,
1024x768
12
13
1280x720
14
60.12
75.03
68.68
85.00
44.77
59.86
63.98
60.02
c.
79.98
75.02
16
1360x768
47.72
59.80
17
1600x1200
75.00
60.00
If used to PC vertical
noise
can
be
seen
frequency
when PIP is
on.
frequency
to
Some dot defects may appear on the screen,
like Red, Green or Blue spots. However, this
will have no impact or effect on the monitor
performance.
Do not press the LCD screen with your finger
a long time as this may produce some temporary distortion effects on the screen.
for
e.
1280x1024
15
screen.
some
In this case, set the PC vertical
60Hz.
d.
11
the
When the PC
appears on the set, a
message may appear on the screen, and the
message will differ according to the Window
system version (Win98, 2000). If a message
screen
appears click "Next" until the message finishes.
f.
If the message "Out of range" appears on
the screen, adjust the PC as in the
'Displayable
Monitor
Specification' section.
MODE 1~17: D-Sub
MODE 1~14,16: DVI-D
37
External Control Device
Connect the RS-232C input jack to an external control device
and control the set's functions externally.
(such
Setup
as a
computer
or an
A/V control
system)
RS-232C
input
socket
Connect the serial port of the control device to the RS-232C jack on the set.
RS-232C connection cables are not supplied with the set.
The set's remote control handset and side panel controls (except main power) will not be functional if the set is controlled by a PC computer or other external device.
1.
2.
3.
D-Sub
9-pin
No.
Pin
1
No connection
RS-232C
RS-232C
RS-232C
OUTPUT
OUTPUT
OUTPUT
RS-232C
RS-232C
RS-232C
OUTPUT
OUTPUT
OUTPUT
male
name
2
RXD
3
TXD
1
(Receive data)
(Transmit data)
(DTE side ready)
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
No Connection
5
(DCE side ready)
(Ready to send)
(Clear to send)
9
6
Set ID
Use this function to
Refer to 'Real Data
specify a monitor ID
Mapping'. See page
number.
40.
SPECIAL
1.
2.
3.
Press the MENU button and then use the D / E button to select
the SPECIAL menu.
Press the G button and then use D / E button to select Set ID.
Press the G button and then use F / G button to adjust Set ID
to choose the desired monitor ID number.
Note
:
The
adjustment
range of Set ID is 0
?
?
*
Baud rate : 9600 bps (UART)
Parity : None
Communication code : ASCII code
Use a crossed (reverse) cable.
38
G
ID
99.
~
MENU
Communication Parameters
?
D
Set ID
Data length :
?Stopbit:1bit
?
8 bits
Prev.
__
_
___
External Control Device
Setup
Command Reference List
COMMAND 1
COMMAND 2
DATA
(Hexadecimal)
01. Power
k
a
0~1
k
b
0~8
03. Volume Mute
k
e
0~1
04. Volume Control
k
f
0~64
05. Contrast
k
0~64
06.
k
g
h
07. Color
k
i
0~64
08. Tint
k
j
0~64
09.
k
k
0~64
10. PIP/PBP/POP ON/OFF
k
n
0~3
11. PIP Position
k
q
0~3
12. Balance
k
t
0~64
13. ACC
k
u
0~3
14. PIP/PBP/POP SOURCE
k
y
0~8
02.
Input
Select
Brightness
Sharpness
Transmission /
0~64
Protocol
Receiving
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
Transmission
*
[Command1][Command2][ ][Set ID][ ][Data][Cr]
*
*
*
[Command 1]
[Command 2]
[Set ID]
:
First command.
:
Second command.
You can adjust the set ID to choose
desired monitor ID number in
Special menu. Adjustment range is
1~99. When selecting Set ID '0',
every connected TV set is controlled. Set ID is indicated as decimal (1~99) on menu and as Hexa
decimal (0x0~0x63) on transmis-
:
(j
or
[DATA]
:
[Cr]
:
*[]
:
*
based
At this
To transmit command data.
Transmit 'FF' data to read status
of command.
Carriage Return ASCII code
'0x0D'
ASCII code Space (0x20)'
(acknowledgement)
this format when receiving normal data.
time, if the data is data read mode, it indicates present status data. If the data is data write
k)
sion/receiving protocol.
*
The Monitor transmits ACK
on
mode, it
returns the data of the PC
computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
*
The Monitor transmits ACK
based
on
this format when
(acknowledgement)
receiving abnormal
data from non-viable functions
or
communication
errors.
Data 1
:
2
:
Not
Illegal Code
supported
3
:
Wait
more
function
time
39
External Control Device
01. Power On
(Command
:
04. Volume
a)
Setup
Control(Command
G To control Power On/Off of the Set.
G To control On/Off of the Volum
Transmission
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data
0
1:PowerOn
Data
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
[f][ ][Set ID][ ][OK][Data][x]
G To show the status of Power On/Off.
Data
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
0
:
Min:00H~Max:64H
05. Contrast
Power Off
1:PowerOn
G To
adjust
You
Acknowledgement
can
(Command
screen
also
:
g)
contrast.
adjust
the contrast in the Picture
menu.
[a][ ][Set ID][ ][OK][Data][x]
*
Min:00H~Max:64H
(Hexadecimal code)
Acknowledgement
Data
f)
.
[k][f][ ][Set ID][ ][Data][Cr]
Power Off
:
:
Transmission
The Monitor transmits ACK (acknowledgement)
based on this format when receiving normal data.
At this time, if the data is data read mode, it indicates present status data. If the data is data write
mode, it returns the data of the PC computer.
[k][g][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
*Refer to 'Real data mapping' as shown below.
Acknowledgement
02.
Input Select (Command
Input)
G To select
You
can
input
source
also select
SOURCE button
on
:
b) (Main Picture
[g][ ][Set ID][ ][OK][Data][x]
for the Set.
an
input
source
using
the
06.
Brightness (Command
G To
Transmission
Data0:TV
2:AV
3 : S-Video
4 : Component 1
5 : Component 2
6:RGBPC
8:DVIPC
can
brightness.
adjust the brightness
screen
also
[k][h][ ][Set ID][ ][Data][Cr]
*
Acknowledgement
5 : Component 2
6:RGBPC
8:DVIPC
[h][ ][Set ID][ ][OK][Data][x]
*
Real data
mapping
0:Step0
A:Step10(SETID10)
Mute(Command : e)
F:Step15(SETID15)
10:Step16(SETID16)
G To control On/Off of the Volume Mute.
Transmission
64
[k][e][ ][Set ID][ ][Data][Cr]
*
:
Volume Mute On
: Volume Mute Off
(Volume Off)
(Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
Data 0
1
40
:
:
Volume Mute On
Volume Mute Off
in the Picture
Transmission
Data Min:00H~Max:64H
Refer to 'Real data mapping'
[b][ ][Set ID][ ][OK][Data][x]
Data 0
1
h)
menu.
Acknowledgement
Data0:TV
2:AV
3 : S-Video
4 : Component 1
adjust
You
[k][b][ ][Set ID][ ][Data][Cr]
03. Volume
:
the remote control.
(Volume Off)
(Volume On)
:
Step
100
Tint,Balance
:-50
+50
~
as
shown below.
External Control Device
07. Color
G To
(Command
the
also
adjust
You
can
screen
adjust
11. PIP
i) (TV,AV only)
:
color.
the color in the Picture
G To
menu.
Setup
Position(Command
adjust
PIP
Transmission
[k][q][ ][Set ID][ ][Data][Cr]
[k][i][ ][Set ID][ ][Data][Cr]
Data 0
1
2
3
Min:00H~Max:64H
(Hexadecimal code)
:
:
:
:
Bottom of the right side on screen
Bottom of the left side on screen
Top of the left side on screen
Top of the right side on screen
Acknowledgement
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
[q][ ][Set ID][ ][OK][Data][x]
Data
Data 0
1
2
3
Min:00H~Max:64H
08. Tint
G To
(Command
the
also
adjust
screen
can
adjust
You
j) (TV,AV -NTSC only)
:
tint.
the tint in the Picture
menu.
Red: 00H
Red: 00H
You
can
screen
t)
Min:00H~Max:64H
[t][ ][Set ID][ ][OK][Data][x]
Green: 64H
:
k) (TV,AV only)
Sharpness.
adjust the sharpness
screen
in the Picture
menu.
13.
Min:00H~Max:64H
ACC(Command
G To
adjust
the
:
screen
u)
color
temperature.
Transmission
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
[k][k][ ][Set ID][ ][Data][Cr]
Data 0 : Normal (9300K)
2 : Warm (6500K)
PC : 0,2,3,
Data
:
Balance.
~
Sharpness (Command
the
also
adjust
the
Acknowledgement
Data
adjust
:
(Hexadecimal code)
[j][ ][Set ID][ ][OK][Data][x]
G To
:
Bottom of the right side on screen
Bottom of the left side on screen
Top of the left side on screen
Top of the right side on screen
Balance(Command
Data
Acknowledgement
09.
:
[k][t][ ][Set ID][ ][Data][Cr]
Green: 64H
~
(Hexadecimal code)
Data
:
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data
12.
G To
Transmission
q)
position.
Transmission
Data
:
Min:00H~Max:64H
(Hexadecimal code)
1 : Cool
3 : User
AV : 0,1,2
Acknowledgement
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
[k][ ][Set ID][ ][OK][Data][x]
Data
Data 0 : Normal
2:Warm
Min:00H~Max:64H
14. PIP/PBP/POP
10. PIP/PBP/POP
ON/OFF(Command
:
n)
G To control PIP/PBP/POP On/Off of the Set.
Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data0:OFF
2:PBP
:
y)
Data0:TV
2:AV
3 : S-video
4 : Component 1
5 : Component 2
6:RGBPC
8:DVIPC
Transmission
1:PIP
3:POP
Acknowledgement
[k][y][ ][Set ID][ ][Data][Cr]
Min:00H~Max:08H
(Hexadecimal code)
[n][ ][Set ID][ ][OK][Data][x]
2:PBP
SOURCE(Command
G To select the sub-screen source.
Data
Data0:OFF
1:Cool
3:User
1:PIP
3:POP
Acknowledgement
[y][ ][Set ID][ ][OK][Data][x]
DataMin:00H~Max:08H
41
Note
42
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Incorrect
position
Vertical bars
or
stripes
on
background
Horizontal noise
Signal
Cable message appears
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
Auto-configure
or
adjust
(VCR only)
the H/V
position
Auto-configure
or
adjust
Clock
Auto-configure
or
adjust
Clock Phase
Is the
Signal
Cable connected
or
loose
43
Download PDF