LG RT-44SZ23RB Owner’s Manual

DLP
PROJECTION TV
OWNER'S MANUAL
Please read this manual
carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
and quote this
information to your dealer when you require service.
Model number
:
Serial number
:
P/NO
:
3828VA0394D
on
(MB02JC,
the back
100K
TX)
cover
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Rear panel
4
Basic Operation
On and off / Programme selection
Volume adjustment / Quick view / Mute function
On screen language selection (option)
8
On Screen Menus
Menu selection
9
SETUP Menu
Auto programme tuning
Manual programme tuning
Fine tuning / Programme edit
Calling the programme table
10
PICTURE Menu
PSM (Picture Status
Picture adjustment
15
Memory)
AUDIO Menu
SSM (Sound Status Memory) / AVL (Auto Volume
Balance adjustment / Equalizer (option)
Sound output selection / Stereo/Dual reception
NICAM reception
TIME Menu
Auto
sleep
20
/
Sleep
timer
SPECIAL Menu
Main picture source selection
Child lock / Picture format
21
Picture in Picture (PIP) Function
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change
23
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
24
Connection of external equipment
Aerial socket
DVD input sockets
DTV input sockets
Monitor output sockets
Audio/Video input sockets
S-Video/Audio input sockets (option)
27
Troubleshooting
2
16
Leveler)
check list
31
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
Warning
To prevent fire
moisture.
or
shock hazard, do not expose the set to rain
or
Service
Never
remove
the back cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
high voltage
properly, unplug it
very
Aerial
Connect the aerial cable to the socket marked +75 Ω on the back
cover. For the best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
Avoid having a fixed image remain on the screen for a long period
of time. Typically a frozen still picture from a VCR, 4:3 picture format or if a CH label is present;
the fixed image may remain visible on the screen.
TO AVOID BURNING IMAGE INTO THE DISPLAY, DO NOT HAVE
A STILL IMAGE ON SCREEN FOR EXTENDED PERIOD OF TIME.
IMAGE AFTER BURN WILL NOT BE COVERED UNDER WARRANTY ie.Menus, Video games, Borders or LOGOS
Manufactured under license from Dolby Laboratories. "Dolby",
"Pro Logic" and the double-D symbol are trademarks of Dolby
Laboratories.
3
Location and function of controls
All the functions
Some functions
panel
can
can
be controlled with the remote control handset.
also be adjusted with the buttons on the front
of the set.
Remote control handset
Before you use the remote control handset,
teries. See the next page.
POWER
1
1.
COMPONENT
TV/AV
2
MUTE
3
TEXT
4
PR-
PR+
SWAP
INPUT
5
MENU
PR
3. MUTE
switches the sound
4.
CANCEL/EXIT
OK
VOL
7
PR
123
456
8
7
8
9
PSM
0
SSM
POSITION
SIZE
STILL
INDEX
TIME
REVEAL
6. MENU
selects
MODE
M
LIST
?
standby
or
on or
or
off to
standby.
Component 2 modes.
off.
PIP BUTTONS
PIP
5. SWAP
returns to the
9
MIX
from
install the bat-
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
6
VOL
on
2. COMPONENT
selects Component 1,
SLEEP
PIP
POWER
switches the set
please
7.
Δ / Ε
previously
viewed programme.
a menu.
(Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
Φ / Γ
I/II
ARC
10
STOP
11
P/STILL
REC
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
OK
REW
PLAY
FF
accepts your selection
or
8. NUMBER BUTTONS
switches the set on from
9. PSM (Picture Status
recalls your preferred
displays
standby
the current mode.
or
directly
a
number.
Memory)
picture setting.
10.I/II
selects the language during dual
selects the sound output.
language
11.VCR BUTTONS
control a LG video cassette recorder.
4
select
broadcast.
Location and function of controls
12.TV/AV
selects the remote operating mode.
switches the set on from standby.
13.SLEEP
sets the
sleep
timer.
POWER
14.TELETEXT BUTTONS
These buttons are used for teletext.
For further details, see the 'Teletext' section.
COMPONENT
TV/AV
12
MUTE
15.CANCEL/EXIT
Clears all on-screen
SLEEP
13
PIP
displays
and returns to TV
viewing
TEXT
14
from any
menu.
PR-
PR+
SWAP
16.SSM (Sound Status Memory)
recalls your preferred sound setting.
MENU
INPUT
PR
CANCEL/EXIT
15
17.LIST
displays
the programme table.
VOL
18.ARC
OK
VOL
Ratio
Control)
(Aspect
changes the picture format.
Note : In teletext mode, the PR +/-, SWAP and INPUT buttons
used for teletext function.
are
PR
Battery
1
2
3
4
5
6
7
8
9
PSM
0
SSM
POSITION
SIZE
STILL
INDEX
TIME
REVEAL
MIX
MODE
installation
The remote control handset is powered by two AAA type batteries.
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
16
-
M
?
LIST
17
I/II
ARC
18
STOP
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
REW
P/STILL
PLAY
REC
FF
5
Location and function of controls
Front
panel
Lamp indicator, operation indicator, and temperature indicator, located side the front panel
operating status of the DLP(Digital Light Processing) projection TV.
controls
reveal the
10
ON/OFF
AV3
R
AUDIO
L/MONO VDEO
S-VIDEO
TV/AV
MENU
OK
VOL
PR
AV3
ON/OFF
R AUDIO L/MONO VIDEO
11
S-VIDEO
TV/AV
MENU
OK
VOL
23 4 5
1.
MAIN POWER (ON/OFF)
switches the set on or off.
2.
TV/AV
selects TV or AV mode.
switches the set on from
3.
4.
MENU
selects
PR
6
7 89
OPERATION INDICATOR
(Refer
8.
LAMP INDICATOR
to
(Refer
or
5.
Φ / Γ
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
6.
Δ / Ε
displays
(Programme Up/Down)
to
p.7)
p.7)
(Refer
to
p.7)
10.REMOTE CONTROL SENSOR
OK
mode.
the current
selects a programme or a menu item.
switches the set on from standby.
6
7.
9. TEMPERATURE INDICATOR
standby.
a menu.
accepts your selection
1
11.AUDIO/VIDEO IN SOCKETS (AV3)
Connect the audio/video out sockets of external equipment to these sockets.
S-VIDEO/AUDIO IN SOCKETS (S-VIDEO)
Connect the S-VIDEO out socket of an VCR to
the S-VIDEO socket.
Connect the audio out sockets of the VCR to
the audio sockets as in AV3.
faint white trace on the
to the position.
This is normal and is a characteristic of the
Note
:
There
might
be
center of the screen
screen.
a
according
Location and function of controls
Rear
panel
ANTIN
75Ω
U
P
G
R
COMPONENT
A
D
E
P
O
R
T
480/p
576/p
NPUT 1
720p
1080i
NPUT2
S-VDEO
Y
PB
A/V1
A/V2 MNITOR
INPUT INPUT OUTPUT
PR
VDEO
(L)
L)
AUDO AUDIO
R)
MONO
(R)
DVD/DTV NPUT
ANT IN
75Ω
AERIAL SOCKET
This
UPGRADE PORT
port is used to upgrade the
software
without
version
changing
Be careful not to
and
U
P
G
R
A
D
480i/p
576i/p
720p
EP
O
R
T
1080i
INPUT 1
INPUT 2
PB
this
PR
Just contact your dealer
vice centre.
S-VIDEO INPUT SOCKET
S-VIDEO
Y
debug
the hardware.
use
DVD/DTV INPUT SOCKETS
COMPONENT
A/V1
INPUT
port.
MONITOR OUTPUT SOCKETS
A/V2 MONITOR
INPUT OUTPUT
VIDEO
or ser-
(L)
(L)
AUDIO
AUDIO
(R)
(R)
AUDIO/VIDEO INPUT
SOCKETS
MONO
DVD/DTV INPUT
?Status Indicators
Operation
Lamp
Indicator
Off
Power cord is not connected.
Red
Power Cord is connected, unit is
Green
On
Orange (flashing)
Preparing operation
Indicator
the end of its life and
Projection lamp
Green
(flashing)
Orange
The
Red
The set has shut down due to
Red
The set has shut down, check the
needs to be
(flashing)
lamp
The set is
reaching
replaced
cover
standby.
standby.
Orange
Indicator
Temperature
is
in
on
with
a new
lamp.
is not closed.
overheating.
overheating.
cooling
fan.
7
Basic
Operation
On and off
1.
2.
POWER
3.
TV/AV
MUTE
MENU
VOL
PR
OK
VOL
PR
1
2
3
4
5
6
7
8
9
0
SSM
Before turning the set on, be sure that the main power switch on
the set is pushed on.
When the main switch is pushed on, the LED will be lit up red.
This mode is Stand-by.
If the set is in stand-by mode, press the POWER, Δ / Ε, TV/AV,
COMPONENT or NUMBER button on the remote control handset to turn it on fully. The LED will blink orange for a while and
then lit up green when the power is successfully on.
To turn the set off, press the POWER button on the remote control handset. The set reverts to the stand-by mode.
Note :
a.
The lamp cooling fan will continue to spin for approximately 120
seconds after the power is turned off by the remote control
handset.
b. Normally, don't push off the main power switch. Instead, use the
remote control to turn the power off.
c.
When the set is turned on again immediately after turning off, it
takes around 30 to 50 seconds for sufficient cooling.
d. When the power is switched off using the main power switch on
the set, the internal cooling system also stops operating.
Therefore, power-on by main power switch takes around 30 to
50 seconds for sufficient cooling.
e. Forced Power-Off : When the set decides itself that the circumstance is not proper for operation, the set will goes to the standby mode automatically. Please retry to turn on the set after a
short period of time.
f.
When the set is switched on, there might be a strange sound
from the set.
Programme
selection
You can select
buttons.
a
Volume
programme number with the Δ / Ε
or
NUMBER
adjustment
Press the Φ / Γ button to
adjust
the volume.
Quick view
Press the SWAP button to view the last programme you
I/II
were
watching.
Mute function
Press the MUTE button. The sound is switched off and the
display
Mute
appears.
You can cancel it
On
screen
by pressing
language
2.
4.
5.
the
Φ /
Γ, SSM, I/II button.
(option)
screen
in desired
language.
/ Ε button to select the
menu.
Press the
Γ
button
and
then the
Δ
/ Ε
button
to
select
Press the Γ button and then the Δ / Ε button to select your
desired language.
Press the OK or Φ button.
All the on screen displays will appear in the selected language.
Repeatedly press the MENU button to return to normal TV view-
ing.
8
on
Press the MENU button and then Δ
Special
Language.
3.
MUTE,
selection
The menu can be displayed
First select your language.
1.
the
On Screen Menus
The
dialogue between you and your set takes place
required for the operating steps are also displayed.
on screen
with
an
operator
menu.
The buttons
Menu selection
1.
Press the MENU button and then Δ / Ε button to
2.
Press the Γ button and then the Δ / Ε button to select
3.
Repeatedly press
Note
:
On
some
display
each
a menu
the MENU button to return to normal TV
menu.
item.
viewing.
models, the ARC will not display.
SETUP
Γ
Auto programme
PSM
SETUP
Manual programme
PICTURE
Contrast
PICTURE
PICTURE Γ
Programme edit
Brightness
Colour
AUDIO
AUDIO
AUDIO
AUDIO
TIME
TIME
SPECIAL
SPECIAL
SETUP
Sharpness
PICTURE
menu
menu
SSM
SETUP
AVL
PICTURE
PICTURE
Balance
Equalizer
AUDIO
AUDIO Γ
TIME
SPECIAL
AUDIO
SETUP
Main
PIP
PICTURE
input
Auto
SETUP
input
menu
sleep
Sleep timer
PICTURE
PICTURE
Child lock
ARC
AUDIO
AUDIO
AUDIO
Language
TIME
TIME
SPECIAL Γ
SPECIAL
SPECIAL
menu
Γ
TIME
menu
9
SETUP Menu
SETUP
SETUP
Γ
Auto programme
Manual programme
PICTURE
Up to 100 TV stations can be stored in this set by programme numbers
(0 to 99). Once you have preset the stations, you will be able to use the
Δ / Ε or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Programme edit
Auto programme
tuning
AUDIO
All stations that
can
TIME
ommended that you
SPECIAL
SPECIAL
1.
be received
use
are
stored
auto programme
by this method. It is recduring installation of this set.
Press the MENU button and then Δ / Ε button to select the
SETUP menu.
2. Press the Γ button and then Δ / Ε button to select Auto pro-
gramme.
SETUP
SETUP
PICTURE
Auto programme
System
I
Manual programme
Storage from
9
Programme edit
To start
Γ
AUDIO
AUDIO
TIME
MENU
SPECIAL
SPECIAL
PR
Φ Prev.
Press the Γ button to select System. Select a TV system with
the Δ / Ε button;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
4. Press the Γ button to select Storage from. Select the beginning programme number with the Δ / Ε button or NUMBER buttons on the Storage from menu.
5. Press the Γ button to select To start.
3.
VOL
OK
VOL
PR
1
2
3
4
5
6
7
8
9
SETUP
0
PICTURE
AUDIO
AUDIO
Auto programme
System
I
Manual programme
Storage from
9
Programme edit
To start
Γ
Searching...
88%
15
TIME
SPECIAL
MENU
Stop
Press the Γ button to begin auto programming.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme Edit' section
to edit the stored programme.
7. Repeatedly Press the MENU button to return to normal TV view6.
ing.
10
SETUP Menu
Manual programme
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
SETUP
Γ
Manual programme
PICTURE
with five characters to each programme number.
name
Auto programme
Programme edit
AUDIO
AUDIO
1.
Press the MENU button and then Δ
SETUP
2.
/ Ε
button to select the
menu.
TIME
Press the Γ button and then Δ
programme.
3. Press the Γ button to
/ Ε
button to select Manual
SPECIAL
display
the Manual programme
Auto programme
SETUP
SETUP
Manual programme
PICTURE
BG
System
Γ
Programme edit
AUDIO
AUDIO
Band
V/UHF
47
Channel
Search
Up/Down
Fine
Up/Down
Name
TIME
menu.
C5
Storage
10
Booster
Off
SPECIAL
SPECIAL
Φ Prev.
MENU
4.
5.
Press the Γ button to select
a
TV
the Δ
/ Ε
BG
:
I
:
DK
:
M
:
(Asia/New Zealand/M.East/Africa/Australia)
(Hong Kong/South Africa)
(East Europe/China/Africa/CIS)
(USA/Korea/Philippines) (option)
VOL
Press the Γ button to select Band. Press the Δ
or
Cable
as
/ Ε
/
Ε button or NUMBER buttons. If
possi-
buttons.
Press the Γ button to select Search. Press the Δ
8.
searching.
If this station is the
one
If
/
Ε button to
1
2
3
4
5
6
7
8
9
0
station is found the search will stop.
required, press the Φ / Γ button to select
a
Storage. Select the desired programme number
Δ / Ε button or NUMBER buttons.
9.
VOL
PR
ble, select the channel number(1 to 75) directly with the number
commence
OK
button to
required.
Press the Γ button to select Channel. Select the desired channel number with the Δ
7.
PR
system with
button;
select V/UHF
6.
System. Select
(0
to
99)
with the
Press the OK button to store it.
10.To store another station, repeat steps 4 to 9.
11. Repeatedly press the MENU button to return to normal TV view-
ing.
11
SETUP Menu
Assigning a station name
1. Repeat the 'Manual programme tuning' steps
SETUP
Γ
Auto programme
Manual programme
PICTURE
Programme edit
AUDIO
TIME
1 to 3.
Press the Γ button to select Name.
Press the Δ button. You can use a blank, +, -, the numeric 0 to
9 and the alphabet A to Z.
With the Ε button you can select in the opposite direction.
4. Select the next position by pressing the Γ button and then take
your choice of the second character, and so on.
5. Press the OK button.
6. Repeatedly press the MENU button to return to normal TV view2.
3.
ing.
SPECIAL
Booster (option)
In some models, Booster is an optional function.
Booster can perform this function.
Only
a
set with
If the reception is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
Booster to On.
1.
2.
3.
4.
MENU
the 'Manual programme tuning' steps 1 to 3.
Press the Φ / Γ button to select Booster.
Press the Δ / Ε button to select On or Off.
Repeatedly press the MENU button to return to normal TV view-
Repeat
ing.
PR
Fine
VOL
OK
VOL
Normally
1.
2.
3.
PR
1
2
3
4
5
6
7
8
9
tuning
fine
tuning
is
only necessary
if
reception
is poor.
the 'Manual programme tuning' steps 1 to 3.
Press the Γ button to select Fine.
Press the Δ / Ε button to fine tune for the best picture and
sound.
Repeat
SETUP
SETUP
PICTURE
0
Auto programme
System
Manual programme
Band
Programme edit
Channel
AUDIO
47
Search
Up/Down
Fine
Up/Down
Name
TIME
BG
U/VHF
BLN 2
Storage
10
Booster
Off
SPECIAL
SPECIAL
Φ Prev.
4.
5.
Store
Press the OK button.
Repeatedly press the MENU button to return to normal TV view-
ing.
finely tuned programme will
during programme selection.
The
12
be indicated
by yellow
number
SETUP Menu
Programme
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
copy a blank station data into the selected programme number.
SETUP
SETUP
Γ
Auto programme
Manual programme
PICTURE
Programme edit
1.
Press the MENU button and then Δ / Ε button to select the
SETUP menu.
2. Press the Γ button and then Δ
button to select
/ Ε
Programme edit.
3. Press the Γ button to display the Programme edit menu.
AUDIO
AUDIO
TIME
SPECIAL
SPECIAL
C1
MENU
Prev.
1
0H0
1H1
2H2
3H3
4H4
5H5A 6C8 7C1
8H8
9H9
10H10
11H9A
12H12
13C08
14C01
15C34
16C06
17S11
18C03
19C48
20C10
21C53
22C55
23S15
24C06
25C09
26C14
27-----
28H28
29-----
30-----
31-----
32-----
33-----
34-----
35-----
36-----
37-----
38-----
39-----
Select
Delete
Copy
Move
Skip
Deleting a programme
1.SelectaprogrammetobedeletedwiththeΔ/ΕorΦ/Γbutton.
2.
MENU
Press the RED button twice.
The selected programme is deleted,
grammes are shifted up one position.
all
the
PR
following pro-
Copying a programme
1.SelectaprogrammetobecopiedwiththeΔ/ΕorΦ/Γbut-
VOL
OK
VOL
ton.
2.
3.
Press the GREEN button.
Move the programme to the desired programme number with the
PR
Δ/ΕorΦ/Γbutton.
4.
Press the GREEN button again to move the programme.
All the following programmes are shifted down one position.
Moving a programme
1.SelectaprogrammetobemovedwiththeΔ/ΕorΦ/Γbutton.
2.
3.
1
2
3
4
5
6
7
8
9
0
Press the YELLOW button.
Move the programme to the desired programme number with the
Δ/ΕorΦ/Γbutton.
4.
Press the YELLOW button
again
to release this function.
a programme number
Select a programme number to be skipped with the Δ / Ε or Φ / Γ
button.
2. Press the BLUE button. The skipped programme turns to blue.
3. Press the BLUE button again to release the skipped pro-
Skipping
1.
gramme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV viewing. If you want to select the skipped programme, directly enter
the programme number with the NUMBER buttons or select it in
the programme edit or table menu.
Repeatedly press
the MENU button to return to normal TV
viewing.
13
SETUP Menu
Calling
the programme table
You can check the programmes stored in the memory
the programme table.
by displaying
table
Press the LIST button to display the Programme table
The programme table appears on the screen.
Displaying programme
C1
menu.
1
0H0
1H1
2H2
4H4
5H5A
6C8 7C1
3H3
8H8
9H9
10H10
11H9A
12H12
13C08
14C01
15C34
16C06
17S11
18C03
19C48
20C10
21C53
22C55
23S15
24C06
25C09
26C14
27-----
28H28
29-----
30-----
31-----
32-----
33-----
34-----
35-----
36-----
37-----
38-----
39-----
PR
LIST
VOL
OK
Select
Exit
VOL
Note :
a. You may find some blue highlighted programmes shown. They
have been set up in the programme edit mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
PR
a programme in the programme table
Select a programme with the Δ / Ε or Φ / Γ button.
The set switches to the chosen programme number.
Selecting
a programme table
3 programme table pages in which contain 100 pro-
Paging through
There
are
grammes.
Pressing the Δ
/ Ε or Φ / Γ
button
repeatedly
turns the pages.
LIST
Press the LIST button to return to normal TV
14
viewing.
PICTURE Menu
PSM
(Picture Status Memory)
Press the MENU button and then Δ / Ε button to select the PICTURE menu.
2. Press the Γ button and then Δ / Ε button to select PSM.
3. Press the Γ button and then Δ / Ε button to select a picture setting on the PSM pull-down menu.
1.
SETUP
SETUP
PSM
Γ
SETUP
SETUP
PSM
Contrast
PICTURE Γ
Brightness
Colour
AUDIO
Sharpness
Dynamic
TIME
Standard
Contrast
PICTURE
AUDIO
Brightness
Mild
Colour
Game
Sharpness
User
SPECIAL
SPECIAL
TIME
SPECIAL
SPECIAL
Φ Prev.
4.
5.
Press the OK
Repeatedly
ing.
or Φ
button.
press the MENU button to return to normal TV view-
To recall your preferred setting, press the PSM button until the
desired picture (Dynamic, Standard, Mild, Game or User)
appears. The picture Dynamic, Standard, Mild and Game are
programmed for good picture reproduction at the factory and cannot be changed.
Picture
You
can
ness
MENU
VOL
adjustment
PR
OK
VOL
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
1.
Press the MENU button
TURE menu.
2. Press the Γ button and
picture item.
3. Press the Γ button and
adjustments, then it will
/ Ε
then Δ
button to select the desired
/ Ε
PR
button to select the PIC-
and then Δ
then Φ / Γ button to make appropriate
be stored for the picture User.
PSM
SETUP
SETUP
Contrast
100Φ
Γ
PICTURE
AUDIO
TIME
SPECIAL
SPECIAL
4.
5.
Press the OK button.
Repeatedly press the MENU button to return to normal TV view-
ing.
15
AUDIO Menu
SSM
SETUP
SETUP
PICTURE
(Sound Status Memory)
SSM
You
AVL
Music, Movie,
preferred sound setting; Dolby virtual, Flat,
Speech and you can also adjust the sound frequency of equalizer, balance. If you switch AVL to on, the set automatically keeps on an equal volume level even if you change pro-
Balance
Equalizer
can
select your
AUDIO Γ
grammes.
TIME
1.
or
Press the MENU button and then Δ / Ε button to select the
AUDIO menu.
2. Press the Γ button and then Δ / Ε button to select SSM.
3. Press the Γ button and then Δ / Ε button to select a sound setting on the SSM pull-down menu.
SPECIAL
SETUP
SETUP
PICTURE
SSM
Γ
Dolby
AVL
Flat
Balance
Music
Equalizer
AUDIO
virtual
Movie
Speech
User
TIME
SPECIAL
SPECIAL
Φ Prev.
MENU
VOL
PR
OK
or Φ
4.
Press the OK
5.
Repeatedly press
ing.
button.
the MENU button to return to normal TV view-
VOL
Dolby virtual
Dolby Virtual lets you experience panoramic
preferred setting, press the SSM button until the
(Dolby virtual, Flat, Music, Movie, Speech or
User) appears. The sound Dolby virtual, Flat, Music, Movie
and Speech are programmed for good sound reproduction at the
factory and cannot be changed.
To recall your
desired sound
PR
SSM
If you press the SSM button after making appropriate adjustEqualizer sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Dolby virtual, Flat, Music, Movie or Speech.
Note
:
ment on the
16
effects of sound.
AUDIO Menu
AVL
(Auto Volume Leveler)
If you select AVL On, the set automatically
ume level even if you change programmes.
keeps
on an
equal
vol-
SETUP
SSM
AVL
PICTURE
1.
Press the MENU button and then Δ / Ε button to select the
AUDIO menu.
2. Press the Γ button and then Δ / Ε button to select AVL.
3. Press the Γ button and then Δ / Ε button to select On or Off
on the AVL pull-down menu.
Balance
Equalizer
AUDIO Γ
TIME
SPECIAL
SETUP
SETUP
SSM
AVL
PICTURE
Γ
Balance
Off
On
Equalizer
AUDIO
TIME
SPECIAL
SPECIAL
Φ Prev.
4.
5.
Press the OK
Repeatedly
ing.
Balance
or Φ
button.
the
MENU button to return to normal TV viewpress
MENU
adjustment
VOL
You
can
adjust
PR
OK
VOL
balance.
1.
Press the MENU button and then Δ / Ε button to select the
AUDIO menu.
2. Press the Γ button and then Δ / Ε button to select Balance.
3. Make desired adjustment with the Φ / Γ button on the Balance
pull-down
PR
menu.
SETUP
SETUP
Balance
0Φ
Γ
PICTURE
AUDIO
TIME
SPECIAL
SPECIAL
4.
5.
Press the OK button.
Repeatedly press the MENU button to return to normal TV view-
ing.
17
AUDIO Menu
Equalizer (option)
SETUP
SETUP
1.
Press the MENU button and then Δ / Ε button to select the
AUDIO menu.
2. Press the Γ button and then Δ / Ε button to select Equalizer.
3. Press the Γ button in Equalizer to display the Equalizer sub
SSM
AVL
PICTURE
Balance
Equalizer
menu.
AUDIO Γ
SETUP
TIME
SSM
AVL
PICTURE
Balance
SPECIAL
Equalizer
AUDIO
TIME
120 500 1.5k
5k
10k
(Hz)
SPECIAL
Φ Prev.
4.
5.
6.
7.
Select a sound band by pressing the Φ / Γ button.
Make appropriate sound level with the Δ / Ε button.
Press the OK button.
Repeatedly press the MENU button to return to normal TV view-
ing.
MENU
VOL
PR
OK
Sound output selection
In AV mode, you
VOL
can
select output sound for the left and
right
loud-
speakers.
Repeatedly press the I/II button to select the sound output.
: Audio signal from audio L input is sent to the left loud
speaker and audio signal from audio R input is sent to
right loud speaker.
L+L : Audio signal from audio L input is sent to left and right
speakers.
R+R : Audio signal from audio R input is sent to left and right
speakers.
L+R
PR
I/II
18
the
loudloud-
AUDIO Menu
Stereo/Dual
reception
When
a programme is selected, the sound information for the station
appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo
reception if the stereo signal is weak, you can switch to
by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button
twice again.
mono
language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loudspeakers.
DUAL I+II sends a separate language to each loudspeaker.
Language
NICAM
selection for dual
equipped
with the receiver for NICAM
NICAM
Instantaneous
high quality
Multiplex) digital
OK
VOL
PR
sound
(Near
can
reception, the
Companding Audio
be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1. When
MONO
NICAM
or
mono
is
received, you
can
select NICAM
is
received, you
can
select NICAM
I/II
FM MONO.
NICAM
STEREO
FM
VOL
reception
If your set is
2. When
PR
or
stereo
FM MONO. If the stereo
signal
is weak, switch to
mono.
3. When NICAM dual is received, you can select NICAM DUAL I,
NICAM DUAL II or NICAM DUAL I+II or MONO.
19
TIME Menu
Auto
SETUP
SETUP
Auto
sleep
Sleep
timer
1.
PICTURE
Sleep
If there is
minutes.
no
input signal,
the set will turn off
automatically
after 10
Press the MENU button and then Δ / Ε button to select the Time
menu.
2.
3.
AUDIO
TIME
Press the Γ button and then Δ / Ε button to select Auto sleep.
Press the Γ button and then Δ / Ε button to select On or Off.
Γ
SETUP
SETUP
SPECIAL
Auto
sleep
Sleep
timer
Γ
Off
On
PICTURE
AUDIO
AUDIO
TIME
TV/AV
SPECIAL
SPECIAL
Φ Prev.
SLEEP
4.
5.
Press the OK
Sleep
MENU
VOL
button.
the MENU button to return to normal TV view-
timer
You don't have to remember to switch the set off before you go to
bed. The sleep timer automatically switches the set to standby after
the preset time elapses.
PR
OK
or Φ
Repeatedly press
ing.
1.
VOL
Press the MENU button and then Δ / Ε button to select the Time
menu.
Press the Γ button and then Δ / Ε button to select Sleep timer.
Press the Γ button and then Δ / Ε button to select a timer setting on the Sleep timer pull-down menu.
4. Press the OK or Φ button.
2.
3.
PR
SETUP
Auto
sleep
Sleep
timer
PICTURE
Off
Γ
10 Min
20 Min
30 Min
60 Min
AUDIO
AUDIO
90 Min
120 Min
TIME
180 Min
240 Min
SPECIAL
Φ Prev.
5.
Repeatedly press
ing.
the MENU button to return to normal TV view-
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90, 120,
180 and 240. The timer begins to count down from the number of
minutes selected.
play
Note :
a. To view the remaining sleep time, press the SLEEP button once.
b. To cancel the sleep time, repeatedly press the SLEEP button
until the display Off appears.
c.
When you switch the set off, the set releases the preset sleep time.
20
SPECIAL Menu
Main
Inputs
picture
can
selection
source
be set for TV
cassette recorder
or
(VCR),
AV mode. AV mode is used when
or
other
equipment
a video
is connected to the set.
SETUP
PIP
PICTURE
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
Main
input
input
Child lock
ARC
AUDIO
Language
1.
Press the MENU button and then Δ / Ε button to select the
SPECIAL menu.
2. Press the Γ button and then Δ / Ε button to select Main input.
3. Press the Γ button and then Δ / Ε button to select TV, AV1,
AV2, AV3, Component 1 or Component 2.
Main
SETUP
SETUP
PIP
PICTURE
AUDIO
AUDIO
input
Γ
TIME
SPECIAL Γ
TV
AV1
input
Child lock
AV2
ARC
AV3
Language
Component
1
Component
2
TIME
SPECIAL
SPECIAL
Φ Prev.
VCR connected to the AV1 INPUT sockets of the set
VCR connected to the AV2 INPUT sockets of the set
AV3 : VCR connected to the AV3 sockets of the set
Component1/2 : DVD or SET-TOP Box connected to the
DVD/DTV INPUT sockets on the set
4. Press the OK or Φ button.
5. Repeatedly press the MENU button to return to normal TV viewAV1
:
AV2
:
MENU
VOL
PR
OK
VOL
ing.
Alternatively you
can
select the TV
or
AV mode
by pressing
TV/AV button.
In AV mode, to return to TV mode, press the Δ / Ε
tons.
or
PR
the
NUMBER but-
1
2
3
4
5
6
7
8
9
0
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized view-
ing.
1.
Press the MENU button and then Δ / Ε button to select the
SPECIAL menu.
2. Press the Γ button and then Δ / Ε button to select Child lock.
3. Press the Γ button and then Δ / Ε button to select On or Off.
4. Repeatedly press the MENU button to return to normal TV view-
ing.
With the lock on, the display Child lock On appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The display Child lock On will not appear on the screen if
any button on the front panel is pressed while displaying the menus.
21
SPECIAL Menu
Picture format
You
can
watch TV in various
picture formats; Auto, 4:3,
16:9
(Wide),
14:9 and Zoom.
You
can
repeatedly press
the ARC button to select your desired
pic-
ture format.
Auto
When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent. (Not available in all
countries)
4:3
MENU
VOL
Following selection will lead you to view a picture with an original
4:3 aspect ratio, with black bars appearing at both the left and right
sides.
PR
OK
VOL
16:9
Following selection will lead you to adjust the picture horizontally, in
linear proportion, to fill the entire screen (useful for viewing 4:3
formatted DVDs).
a
PR
14:9
You
can
through
screen
You
the
enjoy
picture
format of 14:9
the 14:9 mode. The
4:3 is
magnified
can move
the
screen
or
general
14:9 is viewed
to the upper / lower and
screen
up
or
TV programme
the
just like that
left / right.
down with Δ / Ε button.
Zoom
Following
selection will lead you to view the
alternation, while filling the entire
tom
ARC
portions
screen
up
Note
You
:
mode.
22
or
of the
picture
screen.
will be
picture
without any
However, the top and bot-
cropped.
You
can
move
the
down with Δ / Ε button.
are
available to 4:3 and 16:9 in
Component (720p/1080i)
Picture In Picture
Option :
PIP (Picture
in
Picture) displays
a
picture
within
a
(PIP) Function
picture.
On and off
Press the PIP button to switch on the sub picture.
Press CANCEL/EXIT button to switch it off.
Each press of PIP button button changes the screen
shown below.
display
as
PIP
PR-
Note
ture
: When the sub picture
quality might get poor.
Input
size is 1/2 of the main
picture,
the
pic-
PR+
SWAP
INPUT
PR
mode selection for sub
Press the INPUT button to select the
picture
input
Each time this button is pressed, each
displayed as shown below.
mode for the sub
input
picture.
mode for the sub
VOL
OK
VOL
pic-
ture is
Programme
number
AV1
PR
AV2
AV3
Note : When the PIP function is switched on, you
it in the Special menu.
Swapping
between main and sub
Press the SWAP button to
Note : When the main
available.
Programme
exchange
picture
is TV
also
adjust
pictures
the main and sub
pictures.
AV modes, the
swapping
or
selection for sub
can
is
POSITION
SIZE
STILL
picture
The sub picture programme selection is available when the sub picture is TV mode. Press the PR +/- buttons to select a programme
for the sub picture.
Sub
picture
size
Repeatedly press the SIZE button to select the desired sub picture
size. The sub picture appears as 1/9 size of the main picture, followed by 1/16.
Sub
picture
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub pictures move clockwise.
position
is
23
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
information on news, weather, television proshare
grammes,
prices and many other topics.
Teletext is
a
up-to-the-minute
TV/AV
TEXT
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
PR
VOL
OK
VOL
PR
Press the TEXT button to switch to teletext.
If TV and text picture are displayed half and half of the screen,
press the TEXT button again to display text picture fully.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
reappears.
1
2
3
4
5
6
7
8
9
SIMPLE text
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then re-enter
the correct page number.
2. The Δ / Ε button can be used to select the preceding or fol-
Page
0
1.
M
lowing page.
Programming
a
colour button in LIST mode
or FASTEXT mode, press the
If the TV is in SIMPLE text, TOP text
M
button to switch to LIST mode.
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
the remote control handset.
1. Press a coloured button.
2. Using the NUMBER buttons, select the page you wish to pro-
easily
gramme.
Press the OK button. The selected page is stored as the selected page number, blinking once to confirm this. From now on,
you can select this page with the same coloured button.
4. The three other coloured buttons are programmed in this way.
3.
24
Teletext
TOP text
The
user
(option)
(option)
guide displays
the bottom of the
four fields-red, green, yellow and blue at
The yellow field denotes the next group
screen.
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with auto-
TV/AV
matic overflow to the next block.
3. With the green button you can proceed to the next
with automatic overflow to the next group.
Alternatively
4. The
red
the Δ button
button
Alternatively
can
permits
the Ε button
to
can
existing page
be used.
return
to
previous
selection.
PR
be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
VOL
OK
VOL
TOP mode.
PR
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
1
2
3
4
5
6
7
8
9
0
Page
1.
selection
Press the
i
button to select the index page.
select the pages which are colour coded
tom line with the same coloured buttons.
2. You
3.
can
Corresponding to the SIMPLE
page by entering its three digit
along
the bot-
INDEX
teletext mode, you can select a
page number with the NUMBER
buttons in FASTEXT mode.
4. The Δ / Ε button
can
be used to select the
preceding
or
follow-
ing page.
25
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
PR
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
VOL
OK
Displays
VOL
the TV
picture
on
the
screen
while
waiting
for the
new
will appear at the top left hand
teletext page. The display
corner of the screen. When the updated page is available then
will
display
change
to the page number.
Press this button to view the
PR
1
2
3
HOLD
4
5
6
Stops
7
8
the automatic page
updated
change
teletext page.
which will
occur
if
a
tele-
text page consists of 2 or more sub pages. The number of
9
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
0
stop symbol is displayed
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
?
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
Note
:
picture off press this button again.
When TV and text picture are displayed half and half
of the screen, MIX function is not available.
TIME
viewing a TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button again to remove the display. In the teletext mode,
When
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED / GREEN, Δ / Ε
NUMBER buttons.
change
Press this button
26
again
to exit this function.
or
Connection of external
You
can
connect additional
equipment,
such
as
equipment
VCRs, camcorders
ANT IN
75Ω
etc. to your set.
Here shown may be somewhat different from your set.
U
P
G
R
A
D
E
P
O
R
T
Aerial socket
COMPONENT
480i/p
576i/p
720p
1080i
INPUT 1
INPUT 2
S-VIDEO
Y
PB
1.
2.
3.
4.
5.
A/V1
INPUT
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
A/V2 MONITOR
INPUT OUTPUT
PR
VIDEO
(L)
(L)
MONO
AUDIO
AUDIO
(R)
(R)
DVD/DTV INPUT
VCR
ANT IN
75Ω
DVD
sockets
input
Connect the DVD output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y
or Y PB PR) of the DVD to the DVD/DTV INPUT sockets (Y PB
PR) of the set.
2. Connect the audio cable from the DVD to DVD/DTV INPUT
AUDIO sockets of the set.
3. Press the TV/AV or COMPONENT button to select
Component 1 or Component 2.
4. Press the PLAY button on the DVD.
The DVD playback picture appears on the screen.
1.
U
P
G
R
A
D
E
P
O
R
T
COMPONENT
480i/p
576i/p
720p
1080i
INPUT 1
INPUT 2
S-VIDEO
Y
PB
A/V1
INPUT
A/V2 MONITOR
INPUT OUTPUT
PR
VIDEO
(L)
(L)
AUDIO
AUDIO
(R)
MONO
(R)
DVD/DTV INPUT
DVD
ANT IN
75Ω
DTV
input
sockets
Connect the SET TOP inputs to the DVD/DTV INPUT sockets (Y
PB PR) of the set.
2. Connect the audio cable from the SET TOP to the DVD/DTV
INPUT AUDIO sockets of the set.
3. Press the TV/AV or COMPONENT button to select
Component 1 or Component 2.
1.
Monitor
Connect the audio/video in sockets of the other TV
MONITOR OUTPUT sockets of the set.
are
available to the sound out
COMPONENT
480i/p
576i/p
720p
1080i
INPUT 1
INPUT 2
S-VIDEO
Y
PB
A/V1
INPUT
A/V2 MONITOR
INPUT OUTPUT
PR
VIDEO
(L)
AUDIO
(R)
(L)
AUDIO
MONO
(R)
DVD/DTV INPUT
SET TOP
output sockets
Note : You
modes.
U
P
G
R
A
D
E
P
O
R
T
only
or
Box
monitor to
ANT IN
75Ω
in COMPONENT
U
P
G
R
A
D
E
P
O
R
T
COMPONENT
480i/p
576i/p
720p
1080i
INPUT 1
NPUT 2
S-VIDEO
Y
PB
A/V1
INPUT
A/V2 MONITOR
INPUT OUTPUT
PR
VIDEO
(L)
(L)
AUDIO
AUDIO
(R)
MONO
(R)
DVD/DTV INPUT
Second TV
27
Connection of external
Audio/Video
ANT IN
75Ω
equipment
sockets
input
1. Connect the audio/video out sockets of the VCR to audio/video
U
P
G
R
A
D
E
P
O
R
T
COMPONENT
in sockets of the set.
480i/p
576i/p
720p
1080i
INPUT 1
NPUT 2
2.
S-VIDEO
Y
3.
PB
A/V1
INPUT
A/V2 MONITOR
INPUT OUTPUT
PR
Press the TV/AV button to select AV1, AV2
Press the PLAY button on the VCR.
or
AV3.
VIDEO
(L)
The VCR
(L)
AUDIO
MONO
AUDIO
(R)
playback picture appears
on
the
screen.
(R)
DVD/DTV INPUT
: If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
Note
VCR
S-Video / Audio
input
When
VCR to the S-VIDEO socket, the
ity
connecting
will be further
an
sockets
(option)
picture qual-
improved.
1. Connect the S-video socket of the VCR to the S-VIDEO socket
AV3
R AUDIO
L/MONO VIDEO
S-VIDEO
TV/AV
MENU
OK
VOL
PR
of the set.
2.
Connect the audio cable from the VCR to the AUDIO sockets of
the AV2 INPUT
3. Select AV2
VCR
4.
or
or
AV3.
AV3
by pressing
Press the PLAY button
The VCR
Note
:
on
the TV/AV button
repeatedly.
the VCR.
playback picture appears
on
the
screen.
If both S-VIDEO and VIDEO sockets have been connected
ANT IN
to the VCR
75Ω
U
P
G
R
A
D
E
P
O
R
T
COMPONENT
480i/p
576i/p
720p
1080i
INPUT 1
INPUT 2
S-VIDEO
Y
PB
A/V1
INPUT
A/V2 MONITOR
INPUT OUTPUT
PR
VIDEO
(L)
AUDIO
(R)
(L)
AUDIO
MONO
(R)
DVD/DTV INPUT
VCR
AV3
R
AUDIO
L/MONO VIDEO
S-V DEO
TV/AV
VCR
28
MENU
OK
VOL
PR
simultaneously, only
the S-VIDEO
can
be received.
MEMO
MEMO
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Poor
brightness
Strange
sound from inside the monitor
Check these items and try to
adjust these
The mains
plug-(plugged
in and switched
on)
Is the TV switched on?
Try
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
Contact LG service
A
change
provider(s)
in ambient
ture may result in
(VCR only)
humidity
or
tempera-
unusual noise at the
time of switching off or on of the monitor and
does not indicate a fault with the monitor
an
31