LG | AR702TT | LG AR702TT Owner’s Manual

AR720’S_LGESA_ENG_MFL39518847
AV RECEIVER SYSTEM
OWNER’S MANUAL
MODEL: AR702TT
Main Unit - AR702TT-AD
Speakers - SR72TT-F, SR72TT-C, SR72TT-B
SR72TT-A
AR702TS
Main Unit - AR702TS-AD
Speakers - SR72TS-F, SR72TS-C, SR72TS-L
SR72TS-B, SR72TS-A
AR702BR
Main Unit - AR702BR-AD
Speakers - SR72BR-L, SR72BR-B, SR72BR-S
SR72BR-A
AR702NS
Main Unit - AR702NS-AD
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of non
insulated dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a confined
space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer's
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from overheating.
The openings should be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer's
instruction have been adhered to.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled with
liquids, such as vases, should be placed on the
apparatus.
2
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled with
liquids, such as vases, should be placed on the
apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch
circuits. Check the specification page of this owner's
manual to be certain.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug
it, discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an
authorized LG Service Centre.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord
exits the appliance.
To disconnect power from the mains, pull out the
mains cord plug. When installing the product, ensure
that the plug is easily accessible.
Contents
Introduction . . . . . . . . . . . . . . . . .4-11
Before use . . . . . . . . . . . . . . . . . . . . . . . . .4
Before connection . . . . . . . . . . . . . . . . . . .4
Symbol Used in this Manual . . . . . . . . . . . .4
Required cables . . . . . . . . . . . . . . . . . . . . .4
Front Panel . . . . . . . . . . . . . . . . . . . . . . . .5
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . .6
Active Subwoofer . . . . . . . . . . . . . . . . . . . .7
Display window . . . . . . . . . . . . . . . . . . . . .7
Remote Control . . . . . . . . . . . . . . . . . . .8-11
Installation . . . . . . . . . . . . . . . . .12-22
Listening to FM/AM radio . . . . . . . . . . . . .28
Presetting radio stations . . . . . . . . . . . . . .28
Setting the Display Brightness . . . . . . . . .29
Using the Mute Function . . . . . . . . . . . . .29
Using the Sleep Timer . . . . . . . . . . . . . . .29
Displaying Source Information . . . . . . . . .29
Selecting setup menu . . . . . . . . . . . . .30-33
Setup Configuration . . . . . . . . . . . . . . . . . .30
General operation of setup menu . . . . . . . .30
1. SURROUND (Enjoying surround sound) .30
2. SPK TYPE (Setting speaker type) . . . . .31
3. X-OVER . . . . . . . . . . . . . . . . . . . . . . . . .31
4. SPK DISTANCE (Setting speaker
distance) . . . . . . . . . . . . . . . . . . . . . . . . . .32
Connecting components with digital
audio output jacks . . . . . . . . . . . . . . . .12-13
Connecting components with analog
audio jacks . . . . . . . . . . . . . . . . . . . . .14-16
5. SPK LEVEL (Setting speaker level) . . . .32
Connecting audio components . . . . . . . . . .14
Enjoying the listening mode . . . . . . . . .33-35
Connecting a camcorder or game console .15
SURROUND mode . . . . . . . . . . . . . . . . . . .33
Connecting PC, Portable device, or
USB device . . . . . . . . . . . . . . . . . . . . . . . .16
DSP (Digital Sound Processor) mode . . . . .34
Connecting video components for
Playback . . . . . . . . . . . . . . . . . . . . . . . . .17
Connecting video components for
Recording . . . . . . . . . . . . . . . . . . . . . . . .18
Connecting TV or components with
HDMI jack . . . . . . . . . . . . . . . . . . . . . . . .19
Connecting the antennas . . . . . . . . . . . . .20
Connecting speakers . . . . . . . . . . . . .21-22
ENHANCER mode . . . . . . . . . . . . . . . . . . .34
Example of 6.1 channel speaker
system configuration . . . . . . . . . . . . . . . . .21
Speaker System Connection . . . . . . . . . . .22
Operation . . . . . . . . . . . . . . . . . .23-37
Turning On the unit . . . . . . . . . . . . . . . . .23
Using Headphones . . . . . . . . . . . . . . . . .23
Audyssey 2EQ Automatic Speaker
Setup . . . . . . . . . . . . . . . . . . . . . . . . .23-24
Selecting the input source . . . . . . . . . . . .25
Selecting the input mode . . . . . . . . . . . . .25
Switching the audio signal . . . . . . . . . . . .26
Switching the video signal . . . . . . . . . . . .26
Playing media files using the USB feature 27
6. HDMI OUT . . . . . . . . . . . . . . . . . . . . . . .32
7. DIGITAL IN (Setting Digital Input Signal) .32
8. LOAD INITIAL . . . . . . . . . . . . . . . . . . . .33
BYPASS mode . . . . . . . . . . . . . . . . . . . . . .34
About Listening mode . . . . . . . . . . . . . . . .35
Adjusting the speaker level . . . . . . . . . . .36
TEST TONE . . . . . . . . . . . . . . . . . . . . . . .36
AV Sync. (Adjusting the audio delay) . . . .36
Adjusting the tone control . . . . . . . . . . . . .36
Using the NIGHT function
(Dolby Digital only) . . . . . . . . . . . . . . . . . .37
M1, M2, M3 . . . . . . . . . . . . . . . . . . . . . . .37
Reference . . . . . . . . . . . . . . . . . .38-43
Mini Glossary for Audio Stream & Surround
mode . . . . . . . . . . . . . . . . . . . . . . . . .38-39
Troubleshooting . . . . . . . . . . . . . . . . . . . .40
Specifications . . . . . . . . . . . . . . . . . . .41-43
3
Introduction
Before use
• To ensure proper use of this product, please read
this owner’s manual carefully and keep this manual
in an easily accessible place for future reference.
A/V
Analog audio/Composite video cable
Yellow (video)
White (L/audio)
• This manual provides information on the operation
and maintenance of your unit. Should the unit
require service, contact an authorized service
location.
Red (R/audio)
• As the unit may become warm during operation,
always leave sufficient space above the unit for
ventilation.
Yellow
• Choose the installation location of your unit carefully.
Avoid placing it in direct sunlight or close to a source
of heat. Also avoid locations subject to vibrations
and excessive dust, heat, cold or moisture.
VIDEO
Optical
COAXIAL
Composite video cable
Optical digital audio cable
Coaxial digital audio cable
• When removing the power plug from the wall outlet,
always pull directly on the plug, never yank the
cord.
• Do not attempt to clean the unit with chemical
solvents or it may damage the finish. Use a clean,
dry cloth.
COMPONENT
Component video cable
Green
Blue
Before connection
Turn off the power of all the component before making
connections.
Read the owner’s manual of each component you
intend to use with this unit.
Read this before operation
Red
HDMI
HDMI cable
USB
USB cable
Symbol Used in this Manual
USB cable for PC connection
Note
Indicates special notes and operating features.
USB cable for MP3 Player (or Memory Card Reader, etc.)
Tip
Indicates tips and hints for making the task easier.
LINE
LINE IN cable
Required cables
The hookup diagrams on the subsequent pages
assume the use of the following connection cables.
You must purchase the connection cables separately
if necessary.
AUDIO
White (L)
Red (R)
Analog audio cable
Notes
• Turn off the power to all components before making
any connections.
• When connecting an audio/video cable, be sure to
match the color-coded pins to the appropriate jacks
on the components: yellow (video) to yellow; white
(left, audio) to white; and red (right, audio) to red.
• When connecting optical digital cables, insert the
cable plugs straight in until they click into place.
• Do not bend or tie optical digital cables.
4
Front Panel
2
3
4
5
6
8
7
INPUT
SELECT
Introduction
1
MASTER VOLUME
/l
2EQ
DISPLAY
10
9
12
11
14
13
16
15
M1
18
17
1. POWER (
)
Sets the unit to On and Standby.
2. INPUT SELECT
Select the input source.
Turn this knob until the input source you want
appears in the display window.
3. AUDYSSEY (2EQ) LED indicator
Lights up when Audyssey 2EQ is active.
4. DISPLAY
Displays various information about the currently
selected input source.
5. Display window
6. M1, M2, M3
Loads and stores various settings on this buttons
you set at one time.
7. Remote sensor
Receives control signals from the remote control.
8. MASTER VOLUME
Adjusts the volume of the unit to MIN (- 70.0dB)
through MAX (+10.0dB).
9. PHONES connector
Connect a stereo headphone plug ( 6.3 mm) to
PHONES connector for private listening.
10. SPEAKER LEVEL
Adjusts the level of each speaker.
11. TEST TONE
Checks the position and sound balance of
speakers in the following order.
(Front left speaker → Center speaker → Front right
speaker → Surround right speaker → Surround
center speaker → Surround left speaker →
Subwoofer)
12. DIGITAL HDMI 1/2
Selects the input mode (ANALOG, COAXIAL,
OPTICAL 1/2/3).
Selects HDMI 1 or HDMI 2 on the HDMI mode.
13. FM/AM
/l
M2
M3
19
20
21
22
23
24
Selects the unit’s tuner (FM and AM bands).
14. SURROUND MODE
Selects various surround effect.
15. DSP (Digital Signal Processor)
Selects DSP (Digital Signal Processor) mode.
16. BYPASS
Selects BYPASS mode.
17. SETUP
Accesses or removes the setup menu.
18. b/B/v/V (left/right/up/down)
Selects an item in the menu.
(ENTER)
Acknowledges the menu selection.
PRESET (-/+)
Selects preset number of radio.
TUN. (-/+)
Tunes in the desired radio station.
19. PC-LINK
Connect a USB port of PC.
20. USB port
Connect a USB port of USB device.
21. OPTICAL IN3
Connect a component with digital audio output
jacks.
22. AUTO Cal.
Sets the speaker setup automatically.
MIC IN
The included speaker setup microphone ( 3.5 mm)
is connected here for automatic speaker setup.
23. PORTABLE-IN (3.5 )
Connect a portable component.
24. AV IN (AUDIO L/R, VIDEO)
Connect the components with analog audio/video
output jacks (camcorder,game console, etc).
5
Rear Panel
2
1
3
4 5 6 7 8 9 10
+
-
11
1. HDMI IN 1/2
Connect the component with HDMI output.
2. HDMI OUT
Connect a TV or component with HDMI input.
3. VCR IN/VCR REC. OUT
Connect a VCR.
4. TV/STB IN
Connect a TV, satellite tuner or set-top box.
5. DVD IN
Connect a DVD player to DVD IN jacks.
6. CD IN
Connect a CD player or Super Audio CD player to
CD IN jacks.
7. MONITOR OUT
Connect to a video input on your TV or projector.
8. COMPONENT VIDEO OUT
Connect a TV or projector to COMPONENT
VIDEO OUT jacks.
12 13
14
15
16
9. COMPONENT VIDEO DVD IN
Connect a DVD player with component video out
jacks to COMPONENT VIDEO DVD IN jacks.
10. COMPONENT VIDEO TV/STB IN
Connect a satellite tuner or set-top box, etc with
component video out jacks to COMPONENT
VIDEO TV/STB IN jacks.
11. SPEAKER SYSTEM
Connect the speakers.
12. AM ANTENNA
Connect an AM antenna.
13. FM ANTENNA
Connect a FM antenna.
14. SW (PRE OUT)
Connect the active subwoofer.
15. OPTICAL IN 1/2
Connect CD and DVD player, and other
components with an optical digital audio output.
16. COAXIAL
Connect CD and DVD player, and other
components with a coaxial digital audio output.
Notes
• The VCR IN video signal is not outputted to the VCR REC. OUT but outputted to the MONITOR OUT.
However, The VCR IN audio signal can be outputted to the VCR REC. OUT.
• Don’t connect a TV or MONITOR to HDMI 1/2 jacks. The unit may malfunction.
6
1
2
Introduction
Active Subwoofer
3
4
5
6
1. LED indicator
3. Frequency Controller (70Hz - 180Hz)
The RED lights when active subwoofer does not
receive a input for about 10 minutes. (Standby
mode.)
Turn HIGHCUT dial clockwise/counterclockwise to
adjust the frequency.
4. INPUT
The BLUE lights when active subwoofer is
receiving a input.
Connect the unit’s SW(PRE OUT) to INPUT of
active subwoofer.
2. Adjusting Volume (MIN - MAX)
5. Power Switch
Turn VOLUME dial clockwise/counterclockwise to
increase or decrease the sound level.
When pressing the upper part of this switch, the
Power is ON. Pressing the lower part turns OFF
the power.
6. Power Cord
Note
AR702NS model does not supply the active subwoofer.
Display window
1
2
4
3
SLEEP HDMI
MIC
USB
WMA
MP3
PCM Virtual
FM ST.
5
6
VOLUME
MUTE
kHz MHz
dB
ftms
L
SW
C
SL
R
SR
SC
7
1. SLEEP indicator
Lights up when the Sleep function has been set.
2. HDMI indicator
Lights up when the HDMI function has been set.
3. Listening mode & format indicators
These indicators show the currently selected
listening mode and the format of digital input
signals.
4. TUNED indicator
Lights up when the unit is tuned into a radio station.
5. MUTE indicator
Flashes while the unit is muted.
8
9
6. VOLUME indicator
Displays the level of volume.
7. MIC indicator
Lights up when the unit is connect to MIC IN
connector.
8. Message area
Shows various information about the currently
selected source.
9. Speaker indicators
Displays the front, center, surround, surround center,
and subwoofer.
7
Remote Control
Remote control operation range
RECEIVER Mode
Point the remote control at the remote sensor and
press the buttons.
• Distance: About 23 ft (7 m) from the front of the
remote sensor
To set the remote control to RECEIVER mode,
press RECEIVER.
• Angle: About 30° in each direction in front of the
remote sensor
RECEIVER
1
Remote control battery installation
Remove the battery cover on the rear
of the remote control, and insert two
R06 (size AA) batteries with
and
aligned correctly.
Notes
• Do not mix old and new batteries. Never mix
different types of batteries (standard, alkaline, etc.).
• If you intend not to use the remote control for a
long time, remove the batteries to prevent damage
from leakage or corrosion.
2
3
4
• Expired batteries should be removed as soon as
possible to prevent damage from leakage or
corrosion.
About the remote control modes
The remote control can be used to control up to ten
different components. The remote control has a
specific operating mode for use with each type of
component. Modes are selected by using the four
RECEIVER, DVD, VCR, and TV buttons on the
remote control.
7
5
1. Press RECEIVER, DVD, VCR, or TV buttons to
select a mode.
RECEIVER
In RECEIVER Mode, you can control the unit.
DVD
In DVD Mode, you can control DVD player.
VCR
In VCR Mode, you can control VCR.
TV
In TV Mode, you can control TV.
2. Use the buttons supported by that mode to
control the component.
Note
Some of the remote control operations may not work
as expected with other components.
8
6
2. DIGITAL
Press this button to assign one of the digital inputs
to a source.
Selects HDMI 1 or HDMI 2 on the HDMI mode.
DIMMER
Press this button to adjust the brightness of the
display window.
SLEEP
Press this button to set the sleep timer.
AUTO CAL.
Starts Audyssey 2EQ automatic speaker setup;
and turns Audyssey 2EQ On and Off when setup
has been performed.
SPK LEVEL
Adjusts the speaker level from -10dB to +10dB.
TEST TONE
Checks the position and sound balance of
speakers in the following order.
TONE CTRL
Controls the BASS, MIDDLE, and TREBLE.
AV SYNC.
Adjusts the Audio Delay.
LISTENING MODE
- SURROUND
Selects various surround effect.
- DSP (Digital Signal Processor)
Selects DSP (Digital Signal Processor) mode.
- BYPASS
Selects BYPASS mode.
- ENHANCER
Enhances the sound quality of compressed input
signal.
3. USB mode only
x)
- STOP (x
Stops playback.
- PLAY (B)
Starts playback.
X)
- PAUSE(X
Pauses playback temporarily.
- REPEAT
Repeats track.
./>
>)
- SKIP (.
Moves to the next or previous track.
4. DISPLAY
Accesses On-Screen display.
MENU
Access the menu on a disc.
SETUP
Accesses or removes setup menu.
TITLE
Displays the disc’s title menu, if available.
RETURN
Returns to the previous menu.
b/B/v/V (left/right/up/ down)
Selects an option in the menu.
ENTER
Acknowledges the menu selection.
PRESET (-/+)
Selects program of Radio.
TUN. (-/+)
Tunes in the desired radio station.
Introduction
1. POWER (
)
Switches the unit ON and OFF.
RECEIVER/DVD/TV/VCR
To operate the desired function with this remote
control, select the corresponding the buttons.
5. 0-9 numerical buttons
Selects numbered options in a menu.
INPUT SELECT buttons
- TUNER : Selects an FM or AM broadcast
- DVD : Selects a DVD mode.
- PORTABLE : Selects a POTABLE mode.
- VCR : Selects a VCR mode.
- CD : Selects a CD mode.
- AV : Selects an AV mode.
- TV/STB : Selects a TV/STB mode.
- USB : Selects an USB mode.
- PC-LINK : Selects a PC-LINK mode.
PROG./CLEAR
Stores a radio station’s frequency in the tuner’s
memory.
HDMI1/2
Switches the HDMI mode to HDMI 1 and HDMI 2.
INPUT.SEL.
Selects the input settings.
6. M1, M2, M3
Loads and stores various settings on this buttons
you set at one time.
NIGHT
Reduces the dynamic range of Dolby Digital
material so that you can still hear quiet parts even
when listening at low volume levels
MO./ST.
Selects the mono or stereo during receiving a FM
broadcast.
D.SEL
Selects a card on the USB mode in case that more
than one memory cards are connected to the USB
port.
7. MUTE
Mutes the sound.
VOLUME (-/+)
Adjusts the volume.
9
DVD Mode
DVD
To set the remote control to DVD mode, press
DVD.
1
2
3
4
10
1. POWER (
)
Switches the unit ON and OFF.
x)
2. STOP (x
Stops playback.
PLAY (B)
Starts playback.
X)/STEP
PAUSE(X
Pauses playback temporarily. Press this button
repeatedly to play Frame-by-Frame.
REPEAT
Repeats chapter, track, title or all.
bb/B
BB)
SCAN(b
Searches backward or forward.
./>
>)
SKIP (.
Moves to the next or previous chapter or track.
3. DISPLAY
Accesses On-Screen display.
MENU
Access the menu on a disc.
SETUP
Accesses or removes setup menu.
TITLE
Displays the disc’s title menu, if available.
RETURN
Returns to the previous menu.
b/B/v/V (left/right/up/ down)
Selects an option in the menu.
ENTER
Acknowledges the menu selection.
4. 0-9 numerical buttons
Selects numbered options in a menu.
VCR
To set the remote control to VCR mode, press
VCR.
1
2
TV Mode
TV
To set the remote control to TV mode, press TV.
Introduction
VCR Mode
1
2
3
3
1. POWER (
)
Switches the unit ON and OFF.
4
2. CH (-/+)
Selects the channel.
MUTE
Mutes the sound.
TV INPUT
Selects the TV’s source.
VOLUME (-/+)
Adjusts the volume.
1. POWER (
)
Switches the unit ON and OFF.
x)
2. STOP (x
Stops playback.
PLAY (B)
Starts playback.
X)/STEP
PAUSE(X
Pauses playback temporarily. Press this button
repeatedly to play Frame-by-Frame.
bb/B
BB)
SCAN (b
Searches backward or forward.
3. CH (-/+)
Selects the channel.
4. 0-9 numerical buttons
Selects numbered options in a menu.
3. 0-9 numerical buttons
Selects numbered options in a menu.
Controlling the TV
You can control the channel, sound level, input
source, and power switch of your LG TV with the
supplied Remote Control.
Setting Remote Control Codes for LG TV
1. Hold POWER ( ) and press CH (-/+) button
repeatedly until the TV on or off.
2. The POWER ( ), CH (-/+), VOLUME (-/+),
numerical buttons and TV INPUT buttons on
remote control can operate the LG TV.
Note
If the remote control does not operate your particular TV,
try the other code or use the remote control originally
supplied with the LG TV. (LG and Gold Star)
Due to the variety of codes used by manufacturers, OUR
COMPANY cannot guarantee that the remote control will
operate every LG TV model.
11
Installation
Connecting components with digital audio output jacks
Connecting a DVD player (or Digital device), TV monitor or satellite tuner (or
Set top box etc.)
1. Connect the audio jacks.
For details of the required cables, see the page 4.
DVD player (or Digital device)
OPTICAL OUT
COAXIAL OUT
COAXIAL
Optical
+
-
OPTICAL OUT
Optical
Satellite tuner
(or Set top box etc.)
Notes
• You can also connect the device to OPTICAL IN 3 jack on the front panel
• Connect to either the DVD COAXIAL IN or DVD OPTICAL IN 1 jack.
• You can listen to the sound of your TV by connecting your TV’s audio output jacks to the TV/STB AUDIO IN
jacks on the unit. In this case, do not connect the TV’s video output jack to the COMPOSITE VIDEO
(TV/STB) IN jack on the unit.
12
TV monitor
VIDEO INPUT
Installation
2. Connect the video jacks.
For details of the required cables, see the page 4.
The following illustration shows how to connect a TV or satellite tuner (Set top box, etc) and a DVD player
with COMPONENT VIDEO (Y, CB/PB, CR/PR) output jacks.
DVD player (or Digital device)
COMPONENT VIDEO INPUT
COMPONENT VIDEO OUT
COMPONENT
VIDEO
COMPONENT
+
-
VIDEO
VIDEO OUT
COMPONENT VIDEO OUT
Satellite tuner (or Set top box, etc)
COMPONENT
3. Select the input source to play the component.
For details, see the page 25.
Note
Connect to either the COMPOSITE VIDEO OUT or COMPONENT VIDEO OUT jacks.
13
Connecting components with analog audio jacks
Connecting audio components
1. Connect the audio jacks with analog audio cable.
For details of the required cables, see the page 4.
Satellite tuner (or
Set top box etc.)
VCR
AUDIO OUT
AUDIO OUT
DVD player
AUDIO OUT
CD player
AUDIO OUT
L
L
L
L
R
R
R
R
+
-
2. Connect the video jacks with composite video cable.
For details of the required cables, see the page 4.
Satellite tuner (or
Set top box etc.)
VCR
VIDEO INPUT
VIDEO INPUT
DVD player
VIDEO INPUT
+
-
3. Select the input source to play the component.
For details, see the page 25.
14
CD player
VIDEO INPUT
Connecting a camcorder or game console
INPUT
SELECT
Installation
1. Connect the audio and video jacks.
For details of the required cables, see the page 4.
MASTER VOLUME
/l
2EQ
DISPLAY
M1
M2
M3
AUDIO
AUDIO OUT
L
VIDEO OUT
R
VIDEO
Camcorder or game console
2. Connect the unit’s MONITOR OUT jack to the TV’s VIDEO IN jack with composite video cable.
For details of the required cables, see the page 4.
TV monitor
VIDEO INPUT
VIDEO
+
-
3. Select the input source to play the component.
For details, see the page 25.
15
Connecting PC, Portable device, or USB device
For details of the required cables, see the page 4.
Select the input source to play the component after connecting.
- For details, see the page 25.
PC-LINK Connection (P)
Connect the unit’s PC-LINK jack to the corresponding jack of PC with USB cable.
Portable device Connection (L)
Connect the unit’s PORTABLE-IN jack to the corresponding jack of portable device with mini stereo (3.5mm)
cable.
USB connection (U)
Connect the unit’s USB port to the USB port of USB Memory (or MP3 player, etc.).
INPUT
SELECT
MASTER VOLUME
/l
2EQ
DISPLAY
M1
M2
M3
(L)
(P)
LINE
PC
Portable device
PC
(U)
USB
USB Memory, MP3 Player (or
Memory Card Reader, etc.)
16
Connecting video components for Playback
Installation
1. Connect the audio jacks.
For details of the required cables, see the page 4.
2. Connect the video jack and then connect your TV to the MONITOR OUT jack.
You can watch the video from the selected input.
+
-
VIDEO
IN OUT VIDEO
OUTOUT
VIDEO IN VIDEO OUT
AUDIO IN
L
AUDIO OUT
L
R
R
VIDEO
VIDEO
VIDEO INPUT
AUDIO
VCR
TV monitor
3. Select the input source to play the component.
For details, see the page 25.
Note
The VCR IN video signal is not outputted to the VCR REC. OUT but outputted to the MONITOR OUT.
However, The VCR IN audio signal can be outputted to the VCR REC. OUT.
17
Connecting video components for Recording
This section explains how to connect a VCR for recording from a TV or another VCR.
1. Connect the unit’s VCR REC. OUT jack to a video input on the recording VCR.
2. Connect the unit’s VCR REC. OUT L/R jacks to an audio input L/R on the recording VCR.
3. Connect the unit’s TV/STB IN, DVD IN, CD IN, or AV IN jack to a device with video output.
4. Connect the unit’s TV/STB IN, DVD IN, CD IN, or AV IN L/R jacks to an device with audio output.
MASTER VOLUME
M2
M3
+
-
Or Or
AUDIO / VIDEO
VIDEO
IN OUT VIDEO
OUTOUT
VIDEO IN VIDEO OUT
IN OUT VIDEO
OUTOUT
VIDEO
VIDEO IN VIDEO OUT
AUDIO IN
L
AUDIO OUT
L
AUDIO IN
L
AUDIO OUT
L
R
R
R
R
Recording VCR
Video signal
Audio signal
AUDIO / VIDEO
TV monitor, Playback VCR,
Satellite tuner or Set top box or
device with video output, etc
Playback from the Recording VCR
To play back a video in the recording VCR
via the unit:
1. Connect the unit’s VCR IN jack to a video
output on the recording VCR.
2. Connect the unit’s VCR IN L/R jacks to an
audio output on the recording VCR.
+
-
2. Connect the unit’s MONITOR OUT jack to
an video input jack on the TV.
AUDIO / VIDEO
VIDEO
VIDEO
IN OUT VIDEO
OUTOUT
VIDEO IN VIDEO OUT
IN OUT VIDEO
OUTOUT
VIDEO
VIDEO IN VIDEO OUT
AUDIO IN
L
AUDIO OUT
L
AUDIO IN
L
AUDIO OUT
L
R
R
R
R
Recording VCR
TV monitor
Notes
• The unit must be turned on for recording. Recording is not possible while it’s in Standby mode.
• If you want to record directly from your TV or playback VCR to the recording VCR without going through the
unit, connect the TV/VCR’s audio and video outputs directly to the recording VCR’s audio and video inputs.
See the manuals supplied with your TV and VCR for details.
• Video signals connected to video inputs can only be recorded via video outputs. If your TV/VCR is connected
to a composite video input, the recording VCR must be connected to a composite video output.
18
Connecting TV or components with HDMI jack
Installation
HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for an easy
all- digital output to an HDMI or DVI-equipped TV.
Connection to an HDMI TV requires an HDMI cable while connection a DVI-equipped TV requires a DVI adapter
besides a HDMI cable.
HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel
surround-sound audio, HDMI features include uncompressed digital video, a bandwidth of up to 5 gigabyte per
second, one connector (instead of several cables and connector), and communication between the AV source and
AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
licensing LLC.
If you have a HDMI TV or monitor, you can connect it to this unit with a HDMI cable.
HDMI compatible TV
HDMI IN
+
-
HDMI
HDMI
HDMI OUT
Component with HDMI jack
HDMI OUT
Additional component
with HDMI jack
Notes
• The arrow on the cable connector body should face up for correct alignment with the connector on the unit.
• Don’t connect a TV or MONITOR to HDMI 1/2 jacks. The unit may malfunction.
• When the multi channel input is used, the real output may be different from the speaker indicators that appear
in display window. (Multi channel : A mode that can be inputted and outputted up to 6.1ch.)
19
Connecting the antennas
Connect the supplied AM loop antenna and FM wire antenna.
AM Loop Antenna
(supplied)
FM Wire Antenna
(supplied)
+
-
Notes
• To prevent noise pickup, keep the AM Loop antenna away from the unit and other components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as horizontal as possible.
20
The unit allows you to use 6.1 channel system.
The ideal surround speaker system for this unit is 6speaker systems, using front left and right speakers, a
center speaker, surround left and right speakers,
surround center speaker, and a subwoofer.
You can enjoy high fidelity reproduction of DVD
software recorded in the Surround EX format if you
connect the surround center speaker (6.1 channel).
For best results we recommend that all front speakers
be of the same type, with identical or similar driver
units. This the action moves from side to side.
Your center channel speaker is very important as over
80 % of the dialog from a typical motion picture
emanates from the center channel. It should possess
similar sonic characteristics to the main speakers.
Surround channel speakers need not be identical to
the front channel speakers, but they should be of high
quality.
The surround center speaker is useful for playback of
Dolby Digital Surround EX or DTS-ES. One of the
benefits of both Dolby Digital and DTS is that
surround channels are discrete full range, while they
were frequency limited in earlier "Pro Logic" type
systems.
Bass effects are an important part of home theater.
For optimal enjoyment a subwoofer should be used as
it is optimized for low frequency reproduction.
Example of 6.1 channel speaker
system configuration
Surround Left
Front Left
Subwoofer
Front Center
Surround Center
0
0
30
45
110
Surround Right
90
Front left and right speakers
These output the overall sound. Their role in a home
theater is to provide a solid anchor for the sound
image. They should be positioned facing the listener
at about ear level, and equidistant from the TV. Angle
them inward so as to create a triangle, with the
listener at the apex.
Installation
Connecting speakers
Center speaker
This speaker enhances the front left and right
speakers, making sound movements distinct and
providing a full sound image. In movies it’s used
mainly for dialog.
Position it close to your TV (preferably on top) facing
forward at about ear level, or at the same height as
the front left and right speakers.
Surround left and right speakers
These speakers are used for precise sound
positioning and to add realistic ambience.
Position them at the sides of the listener, or slightly
behind, about 2–3 feet (60–100 cm) above ear level.
Ideally they should be equidistant from the listener.
Surround center speaker
Surround center speaker is required when a full 6.1channel system is installed.
This speaker is necessary to enjoy Dolby Digital EX,
DTS-ES Matrix, and DTS-ES Discrete. They enhance
the realism of surround sound and improve sound
localization behind the listener. Position them
behind the listener about 2–3 feet (60–100 cm) above
ear level.
Subwoofer
The subwoofer handles the bass sounds of the LFE
(Low-Frequency Effects) channel.
The volume and quality of the bass output from your
subwoofer will depend on its position, the shape of
your listening room, and your listening position. In
general, a good bass sound can be obtained by
installing the subwoofer as shown left.
Tip
To find the best position for your subwoofer, while
playing a movie or some music with good bass,
experiment by placing your subwoofer at various
positions within the room, and choose the one that
provides the most satisfying results.
Front Right
21
Speaker System Connection
For the best surround sound, you should connect 6 speakers and/or a powered subwoofer.
Connect the your front, center, surround, surround center speakers, and subwoofer by using the speaker wires.
Using a suitable cable, connect the SW (PRE OUT) to an input on optional powered subwoofer, as shown below.
Surround center
speaker
Black
Red
Front speaker (R)
Front speaker (L)
Black
Black
Red
Red
+
-
Active subwoofer
Black
Red
Center speaker
Black
Red
Black
Surround
speaker (R)
Red
LINE INPUT
Surround
speaker (L)
Notes
• Turn the unit off before connecting the speakers wires.
• Be sure to match the speaker wire to the appropriate terminal on the components: + to + and – to –.
If the cables are reversed, the sound will be distorted and will lack bass.
• Be sure to use speakers with the specified impedance as shown on the rear panel of this unit.
• Do not touch the speaker terminals when the power is on. It may cause you to receive an electric shock.
• AR702NS model does not supply the speakers. If necessary, be sure to use speakers with the specified
impedance as shown on the rear panel of the unit.
Connecting speaker wire
1.
2.
3.
1. Loosen the knob by turning it counterclockwise.
2. Insert the bare part of the wire into the hole in side of each terminal.
3. Tighten the knob by turning it clockwise to secure the wire.
22
Operation
Audyssey 2EQ Automatic
Speaker Setup
Before connecting the power cord, connect all your
speakers and AV components.
1. Plug the power cord into an AC wall outlet.
2. Press the POWER (
or
) button.
The unit turns on, the display window lights up.
/l
To turn off the unit, press the POWER (
button.
The unit will enter the Standby mode.
/l
or
)
Operation
Turning On the unit
With the bundled speaker setup microphone ( 3.5mm),
the Audyssey 2EQ Automatic Speaker Setup function
automatically calculates the size, level, distance, bass
management crossover frequency, and optimal settings
for each speaker at the listening position. Audyssey
2EQ also corrects acoustical distortions within the
listening area.
Before using this function, connect and position all your
speakers.
Notes
Using Headphones
You can connect a pair of stereo headphones (6.3
phone plug) to the unit’s PHONES jack for private
listening.
INPUT
SELECT
/l
2EQ
DISPLAY
M1
M2
M3
Notes
• Always turn down the volume before connecting
your headphones.
• The speakers are turned off while the headphones
plug is inserted in the PHONES jack.
• Set the volume of subwoofer between middle and
maximum before the automatic speaker setup.
• When positioning the microphone, use a tripod or
stand at ear height with the microphone pointing
directly up. It is not recommended to place the
microphone on the back of the couch or recliner, or
held by the hand. Be sure that the path from
microphone to the speakers is not blocked by
objects. Avoid placing the microphone close to a
seat back or wall as sound reflections may cause
adverse results.
• Make sure the environment is quiet before starting
the Audyssey 2EQ automatic speaker setup. Turn
off air conditioning units if possible.
• Loud test sounds will occur during Audyssey 2EQ
Automatic Speaker Setup. This is part of normal
operation.
• The Audyssey test sound may be louder than the
typical playback level. This is required so that the
measurements overcome any background noise in
the room.
1. Connect the speaker setup microphone to the
MIC IN jack, and position it in the main
listening position.
“MIC IN” appears in the display window.
MASTER VOLUME
Microphone
position
M3
Speaker setup
microphone
23
2. Press AUTO CAL..
"Audyssey 2EQ", “AUTO CAL. : START” and
“AUTO CAL. : 1ST-P” flash in the display window
in turn.
3. Press ENTER.
- “FL TESTING..” appears in the display window.
- The speaker setup function is automatically
measured in the first position from each speaker.
FL TESTING..→C TESTING..→FR TESTING..→
SR TESTING..→SC TESTING..→SL TESTING..
→SW TESTING..
- After completed, the “B 2nd-POS CAL.”
appears in the display window.
Notes
• If each speaker is not connected, “CONNECT
SPK” flashes in the display window.
• If the speaker setup microphone is not
connected, “CONNECT MIC” appears in the
display window.
4. Measure a second position (recommended) or
calculate results for first position only.
Select “B 2nd-POS CAL.” or “2nd-POS BCAL.”
by pressing b/B.
“B 2nd-POS CAL.”: (Recommended) Selecting this
option will measure a second
listening position for each
speaker and will produce the
best correction results. Please
place the microphone at ear
height in a secondary listening
position, such as in a seat next
to the first one that was
measured.
“2nd-POS BCAL.”: Selecting this option will
proceed with the calculation
using the first listening position
measurement only.
5. Select ENTER.
If you select the “B 2nd-POS CAL.”, the audyssey
2EQ automatic speaker setup is measured on the
second position. After completed, “CALIBRATING...”
appears for about 2 minutes in the display window.
If you select the “2nd-POS BCAL.”, “CALIBRATING...”
appears for about 2 minutes in the display window.
24
6. Check the result value of speaker size, level,
v / V,
distance and X-OVER by pressing b/B/v
ENTER.
You can only check the result values of the first
position.
Notes
• If the result values of subwoofer is “NONE”, the
FRONT LR of SPK TYPE on the SETUP menu
are automatically set to “LARGE”.
• The result values of the second position is not
measured the result value of speaker size, level,
distance and X-OVER but an optimum sound.
BNO OK” appears in the
7. When “RESULTB
BOK”
display window, select the “RESULT NOB
B and then select ENTER.
by pressing b/B
- The unit will automatically enter the Standby
mode.
BNO OK" will restart the
- Selecting "RESULTB
Audyssey 2EQ Automatic Speaker Setup. The
previous measurements will be discarded.
8. Turn Audyssey 2EQ On or Off.
- Press AUTO CAL. on the remote control to turn
Audyssey 2EQ acoustical correction on or off.
Notes
• Press AUTO CAL. for about 2 seconds to begin the
Audyssey 2EQ automatic speaker setup again.
• If you want to cancel during the automatic speaker
setup process, press AUTO CAL. The “EXIT? > No
Yes” appears in the display window. Then select
“YES” by pressing b/B and then press ENTER.
• If there is excessive noise during automatic speaker
setup. “SPK NOISE” appears in the display window.
Quiet the environment and begin the Audyssey 2EQ
automatic speaker setup again.
• Disconnect the speaker setup microphone after
automatic speaker setup.
This section explains how to select the input source
(i.e., the AV component that you want to listen to or
watch).
1. Press POWER (
/l
or
) to turn the unit on.
2. Select a source by rotating the INPUT SELECT
on the front panel.
The selected source appears in the display window.
To select the
Display
Built-in tuner
Tuner or frequency
DVD player
DVD
Portable player
Portable
VCR
VCR
3. Turn on the component and start playback.
4. To adjust the volume, rotate the MASTER
VOLUME on the front panel, or press VOLUME
(-/+) on remote control.
Operation
Selecting the input source
Selecting the input mode
If you connect a component to a digital input jack, you
must assign that jack to an input source.
1. Select the input source that you want to
assign.
Some of input sources may not be assigned.
2. Press DIGITAL.
The current assignment flashes in the display
window.
CD or Super Audio CD player CD
Camcorder or TV game
AV
Satellite tuner
TV/STB
USB device
USB
PC
PC-LINK
Component with HDMI jack
HDMI 1/ HDMI 2
To select the required input source using the
remote control you must ensure that the remote is
in the receiver mode. This can be verified by
pressing the RECEIVER button until it can be seen
illuminated. Once in the receiver mode simply press
the INPUT. SEL. button until it is lit and then press
the numerical key that corresponds with the desired
input. Subsequent presses of the numerical keys
will also switch to the input shown on the remote.
To cancel this function simply press the INPUT.
SEL. button again until it is not illuminated.
To select the
Press the
Display
Built-in tuner
TUNER button
repeatedly.( )
Tuner or
frequency
DVD player
Portable player
VCR
CD
DVD button.( ) DVD
PORTABLE
Portable
button.( )
VCR button.( ) VCR
CD button.( )
CD
Camcorder or
TV game
AV button.( )
AV
Satellite tuner
TV/STB button.
( )
TV/STB
USB device
USB button.( )
NO USB
PC
PC-LINK button. PC-LINK
( )
3. Press DIGITAL repeatedly to select Opt. 1,
Opt. 2, Opt. 3, Coaxial or Analog.
Examples:
If you connect your DVD player to the
OPTICAL IN 1 jack, set “DVD” to “Opt. 1”.
If you want to listen to audio from the component
connected to the OPTICAL IN 2 jack when the
VCR input source is selected, set “VCR” to “Opt.
2”.
If you want to listen to audio from the component
connected to the COAXIAL IN jack when the
TV/STB input source is selected, set “TV/STB” to
“Coaxial”.
For input source that you don’t want to assign a
digital input jack, set to “Analog”.
Notes
• You can select the input mode only when you set
the input source to DVD, VCR, CD, AV, or TV/STB.
Input source
Initial setting
DVD
OPTICAL 1
Opt. 1
VCR
ANALOG
Analog
CD
COAXIAL
Coaxial
AV
OPTICAL 3
Opt. 3
TV/STB
OPTICAL 2
Opt. 2
Display
• You can also select other input mode on the
selected input source.
To mute the sound
Press MUTE on the remote control. To cancel, press it
again.
Component with HDMI1/2 button. HDMI1/HDMI2
( )
HDMI jack
25
Switching the audio signal
This section explains how to switch the audio input/output signal about each function mode.
(O: Active, X: Inactive)
Input/
Output
Output
Input
•
•
•
•
OPTICAL 1
OPTICAL 2
OPTICAL 3
COAXIAL
Function
mode
Analog RCA input
(VCR, TV/STB, DVD,
CD, Portable, AV)
TUNER
X
X
X
O
O
DVD
O
O
X
O
O
X
Portable
O
X
X
O
O
X
• HDMI 1
• HDMI 2
Speaker
terminal
VCR
REC.OUT
HDMI
OUT
X
VCR
O
O
X
O
O
X
CD
O
O
X
O
O
X
AV
O
O
X
O
O
X
TV/STB
O
O
X
O
O
X
USB
X
X
X
O
X
X
PC-LINK
X
X
X
O
O
X
HDMI 1/ HDMI 2
X
X
O
O
X
O
Note
The VCR REC. audio output is outputted only when analog audio input is selected on each function mode.
Switching the video signal
This section explains how to switch the video input/output signal about each function mode.
(O: Active, X: Inactive)
Output
Function mode
MONITOR OUT
VCR REC. OUT
COMPONENT OUT
HDMI OUT
X
TUNER
X
X
X
DVD
O
O
O
X
Portable
X
X
X
X
VCR
O
X
X
X
CD
O
O
X
X
AV
O
O
X
X
TV/STB
O
O
O
X
USB
X
X
X
X
PC-LINK
X
X
X
X
HDMI 1/ HDMI 2
X
X
X
O
Note
• The VCR IN video signal is not outputted to the VCR REC. OUT video signal. However, The VCR IN audio
signal can be outputted to the VCR REC. OUT audio signal.
• COMPOSITE VIDEO signal is only outputted to MONITOR OUT or VCR REC. OUT.
COMPONENT VIDEO signal is only outputted to COMPONENT VIDEO OUT.
HDMI IN signal is only outputted to HDMI OUT.
26
You can enjoy music files (MP3/WMA) saved in an
MP3 player or USB memory by connecting the
storage device to the USB port of this unit.
Basic Operation
1. Rotate the INPUT SELECT on the front panel
until the “USB” appears in the display window.
Or press RECEIVER on the remote control, and
then press INPUT.SEL. And then press the USB
on the remote control.
“NO USB” appears in the display window.
Repeat
During playback, press REPEAT repeatedly to select
a desired repeat mode.
Display
Playback
N
Plays all tracks once.
1
Plays one track repeatedly
A
Plays all tracks repeatedly.
R
Plays all tracks randomly.
Information display of MP3 file
During playback, press DISPLAY repeatedly.
- You can check the ID3 TAG (Title→Artist→Album),
dsik number, sound mode, channel and sampling
frequency in the display window.
2. Connect the USB device to the USB port of the
unit. (See the page 16.)
“CHECKING...” appears in the display window,
and then the total number of files is displayed.
Note
The information of title, artist, and album supports a
maximum of 40 letters.
3. Press PLAY (B).
Compatible Devices
Note
If there is no file in the USB device, “NO FILE”
appears in the display window.
1. Devices which require additional program
installation when you have connected it to a
computer, are not supported.
2. MP3 Player: Flash type MP3 player.
• The MP3 player requiring installation of a driver is
not supported.
3. USB Flash Drive: Devices that support USB2.0 or
USB1.1.
Moving to other memory cards
In case that more than one memory cards are
connected to the USB port, press the D.SEL
repeatedly on the remote control to select a memory
card you want to use.
Note
If there is no memory card in the USB device, “NO
DISK” appears in the display window.
Pause
Press the PAUSE(X) during playback.
Press the PLAY (B) to resume playback.
Stop
Press the STOP (x) during playback.
- The total number of files appears in the display
window.
Skip
During playback, press SKIP (./>) to move to
the next track or to return to the beginning of the
current track. Press SKIP . twice briefly to step
back to the previous track.
Operation
Playing media files using the
USB feature
Notes:
• Do not extract the USB device in operating.
• A back up demands to prevent a data damage.
• If you use a USB extension cable or USB hub, the
USB device might not be recognized.
• This unit can support USB 2.0 or USB 1.1.
• A device using NTFS file system is not supported.
(Only FAT (12/16/32) file system is supported.)
• The USB function of this unit does not support all
USB devices.
• Digital camera and mobile phone are not
supported.
• This unit is not supported when the total number of
files is 1000 or more.
• MP3/WMA file compatibility
- Bit rate: within 8 - 320 Kbps (MP3),
within 8 - 320 Kbps (WMA)
- Sampling frequency: within 32 - 48 KHz (MP3),
within 32 - 48 KHz (WMA)
27
Listening to FM/AM radio
Presetting radio stations
You can listen to FM and AM broadcasts through the
built-in tuner. Before operation, make sure you have
connected the FM and AM antennas to the unit.
You can preset up to 50 FM or AM stations.
Then you can easily tune in the stations you often
listen to.
Automatic tuning
1. Rotate INPUT SELECT to select tuner (FM or
AM).
Or select TUNER with the remote control to
select tuner (FM or AM).
Tip
Refer to the “Selecting the input source” on the
page 25 to select the tuner mode.
2. Press TUN. - or TUN. + for more than 2
seconds.
Press TUN. - for more than 2 seconds to scan
from high to low.
Press TUN. + for more than 2 seconds to scan
from low to high.
The unit stops scanning whenever a station is
received.
Note
In case of FM stereo reception, if the FM stereo
reception is poor and “ST.” flashes in the display
window, select monaural audio so that the sound will
be less distorted by pressing the MO./ST.
- The “ST.” indicator disappears in the display
window.
There will be no stereo effect, but the reception will
improve. Press the button again to restore the
stereo effect.
1. Rotate INPUT SELECT to select tuner (FM or
AM).
Or select TUNER with the remote control to
select tuner (FM or AM).
Tip
Refer to the “Selecting the input source” on the
page 25 to select the tuner mode.
2. Tune in the station that you want to preset
using Automatic tuning or Manual tuning.
3. Press PROG./CLEAR.
A preset number flashes in the display window for
a few seconds. When a preset number flashes, do
step the 4.
4. Press PRESET - or PRESET+ to select a preset
number you want.
If a preset number is not flashed before you select
the preset number, start again from the step 3.
5. Press PROG./CLEAR again.
The station is stored to the selected preset
number.
If a preset number is not flashed before you press
PROG./CLEAR, start again from the step 3.
6. Repeat the steps 2 to 5 to preset another
station.
Manual tuning
To clear all the stored stations
Press TUN. - or TUN. + briefly and repeatedly on
the FM or AM mode to select a station you want.
1. Press and hold PROG./CLEAR for about two
seconds.
“ERASE ALL” appears in the display window.
2. Press PROG./CLEAR again.
All the presetting stations are cleared.
Notes
• If you have accidentally entered into the "ERASE
ALL" mode and you do not wish to clear the
memory, do not press any key. After a few seconds,
"ERASE ALL" will go out by itself and change to
normal mode.
• If all stations have already been entered, “FULL” will
appear in the display window for a moment and
then a preset number will flash. To change the
preset number, follow the steps 4-5 as specified
above. The previous frequency is automatically
refreshed.
28
Displaying Source Information
You can adjust the brightness of the display window.
You can display various information about the current
input source.
Press RECEIVER, and then press DIMMER on the
remote control repeatedly.
The brightness of the display window is on/off.
Using the Mute Function
You can temporarily mute the output of the unit.
Press RECEIVER, and then press MUTE.
The output is muted and the “MUTE” flashes in the
display window.
To cancel it, press the MUTE again, or adjust the
volume.
Using the Sleep Timer
With the sleep timer, you can set the unit to turn
off automatically after a specified period.
1. Press RECEIVER, and then press SLEEP
repeatedly to select the required sleep time.
The SLEEP indicator and the sleep time appears
in the display window.
2. Each time you press SLEEP the setting
changes in the following order.
SLEEP 180 →150 →120→90 →80 → 70 → 60→
50 → 40 → 30 → 20 →10 →OFF (No display)
The specified sleep time minute appears on the
display for about five seconds, then the previous
display reappears.
Operation
Setting the Display Brightness
Press RECEIVER, and then press DISPLAY
repeatedly to cycle through the available
information.
Note
The following information can typically be displayed
for input sources in the display window.
Input source &
Input mode
DVD
Listening mode
DSP BYPASS
Surround Channel
values* & Signal
format
3/2.1
Opt.1
Analog
* Interpreting Surround Channel values
3/2.1
A B C
A: The number of front channels (3 means front
left, front right, and center).
B: The number of surround channels (2 means
surround left and surround right). If there’s
surround center channel information, this will be
3.
C: Subwoofer (1 means yes).
Note
To check the remaining time before the unit sleeps.
press SLEEP.
- The remaining time appears for about five seconds
in the display window.
29
Selecting setup menu
By using the Setup menu, you can make various
adjustments to items such as sound.
Setup configuration
1 . SURROUND
A) PL2X-PANO : N/Y
B) PL2X-DIM. : -7 ~ +7
C) PL2X-CWID : 0 ~ 7
D) Neo:6-CG : 0.0 ~ 1.0
2 . SPK TYPE
FRONT LR : SMALL / LARGE
CENTER : SMALL / LARGE / NONE
SURR. LR : SMALL / LARGE / NONE
SURR. C : SMALL / LARGE / NONE
LFE OUT : FRONT / SUBWF / BOTH
3 . X - OVER
X - OVER : 040Hz ~ 200Hz
4 . SPK DISTANCE
DELAY FL : 0.0M ~ 15.0M
DELAY C : 0.0M ~ 15.0M
DELAY FR : 0.0M ~ 15.0M
DELAY SR : 0.0M ~ 15.0M
DELAY SC : 0.0M ~ 15.0M
DELAY SL : 0.0M ~ 15.0M
DELAY SW : 0.0M ~ 15.0M
5 . SPK LEVEL
FL LEV : -10dB ~ +10dB
C LEV : -10dB ~ +10dB
FR LEV : -10dB ~ +10dB
SR LEV : -10dB ~ +10dB
SC LEV : -10dB ~ +10dB
SL LEV : -10dB ~ +10dB
SW LEV : -10dB ~ +10dB
6 . HDMI OUT
HDMI OUT : TV / SPK
7 . DIGITAL IN
Digital : AUTO / MANUAL
8 . LOAD INITIAL
LOAD INIT : NO / YES
General operation of setup menu
1. Press RECEIVER, and then press SETUP.
The Setup menu appears in the display window.
The default setting is 1 . SURROUND .
2. Use b / B to select the desired item then press
ENTER to move to the second level.
The current setting for the selected item appears
in the display window.
3. Use b / B to select the second desired item
and then use v / V to select the desired setting.
4. Press RETURN to exit the previous menu.
Press SETUP to exit the Setup menu.
1. SURROUND (Enjoying surround
sound)
These settings provide for playing any 2-channel
digital source such as Dolby Digital, or 2-channel
analog/PCM source in the PLIIx Music listening mode.
1 . SURROUND
A) PL2X-PANO : N/Y
B) PL2X-DIM. : -7 ~ +7
C) PL2X-CWID : 0 ~ 7
D) Neo:6-CG : 0.0 ~ 1.0
PL2X-PANO (Panorama mode)
With this function, you can broaden the width of the
front stereo image when using the Pro Logic II Music
or Pro Logic IIx Music listening mode.
Y : Panorama function on.
N : Panorama function off (default).
PL2X-DIM. (Dimension mode)
With this setting, you can move the sound field
forward or backward when using the Pro Logic II
Music or Pro Logic IIx Music listening mode. Higher
settings move the sound field forward.
It can be adjusted from -7 to 7 (default is 0).
PL2X-CWID (Center width mode)
With this function, you can adjust the width of the
sound from the center speaker when using the Pro
Logic II Music or Pro Logic IIx Music listening mode.
Normally if you are using a center speaker, the center
channel sound is outputted by only the center speaker.
(If you are not using a center speaker, the center
channel sound will be distributed to the front left and
right speakers to create a phantom center). This setting
controls the front left, right, and center mix, allowing
you to adjust the weight of the center channel sound. It
can be adjusted from 0 to 7 (default is 3).
Neo:6-CG (Center width mode)
The DTS Neo:6 Music listening mode creates 6channel surround sound from 2-channel (stereo)
sources. With this setting, you can specify by how
much the front left and right channel output is
attenuated in order to create the center channel. It can
be adjusted from 0 to 1.0. This setting is unavailable if
no surround speakers are connected.
When set to 0, the front left and right channel output is
attenuated by half (–6dB), giving the impression that
the sound is located centrally. This setting works well
when the listening position is considerably off center.
When set to 1.0, the front left and right channels are
not attenuated, maintaining the original stereo balance.
Note
If you set the surround mode to the Neo:6 CINEMA, ,
you cannot adjust the settings since the Neo:6-CG is
fixed to 1.0.
30
You can set the size of the speakers connected to this
unit.
2 . SPK TYPE
FRONT LR : SMALL / LARGE
CENTER : SMALL / LARGE / NONE
SURR. LR : SMALL / LARGE / NONE
SURR. C : SMALL / LARGE / NONE
LFE OUT : FRONT / SUBWF / BOTH
FRONT LR (FRONT LEFT/RIGHT)
Set the FRONT L/R speaker to LARGE or SMALL.
• LARGE : If you connect large speakers that will
effectively reproduce bass frequencies,
select “LARGE”. Normally, select
“LARGE”.
When the LFE OUT is set to “FRONT”,
front speakers are automatically set to
“LARGE”.
• SMALL : If the sound is distorted, or you fell a
lack of surround effects when using multi
channel surround sound, select “SMALL”
to activate the bass redirection circuitry
and output the front channel bass
frequencies from subwoofer.
When the LFE OUT is set to “SUBWF”,
front speakers are automatically set to
“SMALL”.
CENTER
Set the CENTER speaker to LARGE, SMALL, or
NONE.
• LARGE : If you connect large speakers that will
effectively reproduce bass frequencies,
select “LARGE”. Normally, select
“LARGE”.
• SMALL : If the sound is distorted, or you fell a
lack of surround effects when using multi
channel surround sound, select “SMALL”
to activate the bass redirection circuitry
and output the center channel bass
frequencies from front speaker or
subwoofer.
• NONE : If you did not connect a center speaker,
select “NONE”. The sound of the center
channel will be outputted from the front
speakers.
SURR. LR (SURROUND LEFT/RIGHT)
Set the SURROUND L/R speaker to LARGE, SMALL,
or NONE.
• LARGE : If you connect large speakers that will
effectively reproduce bass frequencies,
select “LARGE”. Normally, select
“LARGE”.
• SMALL : If the sound is distorted, or you fell a
lack of surround effects when using multi
channel surround sound, select “SMALL”
to activate the bass redirection circuitry
and output the surround channel bass
frequencies from subwoofer or other
“LARGE” speaker.
• NONE : If you did not connect surround speaker,
select “NONE”.
Operation
2. SPK TYPE (Setting speaker type)
SURR. C (SURROUND CENTER)
When the SURROUND L/R speakers are set to
“NONE”, the surround center speaker is also
automatically set to “NONE” and the setting cannot be
changed.
LFE OUT
Set the output of subwoofer to FRONT, SUBWF, or
BOTH.
• FRONT : Select “FRONT” if you did not connect a
subwoofer. The LFE signals, the lowfrequency signals of front left and right
channels, and the low-frequency signals
of other speakers set to “SMALL” or to
“NONE” are all directed to the front left
and right speakers.
• SUBWF : Select “SUBWF” if you connected a
subwoofer. The LFE signals as well as
the low-frequency signals of other
speakers set to “SMALL” or to
“NONE” are directed to the subwoofer.
• BOTH : Select “BOTH” if you connected a
subwoofer. The low-frequency signals of
any source are output from the
subwoofer. The LFE signals as well as
the low-frequency signals of other
speakers set to “SMALL” or to
“NONE” are directed to the subwoofer.
The low-frequency signals of the front
left and right channels are directed to
the front left and right speakers.
(When the analog or digital 2ch input is
used, the front speakers is only
outputted.)
3. X-OVER
The bass frequency you select is added to the output
of subwoofer or outputted to the front speakers.
3 . X - OVER
X - OVER : 040Hz ~ 200Hz
X - OVER
Set the bass frequency to 40Hz - 200Hz.
The default setting is 100Hz.
31
4. SPK DISTANCE (Setting speaker
distance)
You can set the distance of the speakers connected to
this unit.
Initial value is 3.0 meter (10 feet).
It lets you set the distance from your listening position
to the front, center, surround, surround center, and
subwoofer speakers. You can adjust from 0 meter to
15 meters (0 to 50 feet) in 0.3 meter (1 foot) steps.
If you press DISPLAY during setting the distance, the
unit of distance is changed from M (Meter) to Ft (Feet)
in the display window. If you press DISPLAY again, it
is changed from Ft (Feet) to M (Meter).
4 . SPK DISTANCE
DELAY FL : 0.0M ~ 15.0M
DELAY C : 0.0M ~ 15.0M
DELAY FR : 0.0M ~ 15.0M
DELAY SR : 0.0M ~ 15.0M
DELAY SC : 0.0M ~ 15.0M
DELAY SL : 0.0M ~ 15.0M
DELAY SW : 0.0M ~ 15.0M
DELAY FL / DELAY FR
Set the distance of Front L/R speakers.
If both front speakers are not placed an equal
distance from your listening position, set the distance
to the closest speaker.
DELAY C
Sets the distance of Center speaker.
DELAY SR / DELAY SL
Sets the distance of Surround L/R speakers.
If both surround speakers are not placed an equal
distance from your listening position, set the distance
to the closest speaker.
DELAY CS
Sets the distance of Surround center speaker.
DELAY SW
Sets the distance of Subwoofer.
5. SPK LEVEL (Setting speaker level)
You can adjust the level of each speaker. These
setting are applied to all sound fields.
Initial value is 0dB.
You can adjust from -10dB to +10dB in 1dB step.
5 . SPK LEVEL
FL LEV : -10dB ~ +10dB
C LEV : -10dB ~ +10dB
FR LEV : -10dB ~ +10dB
SR LEV : -10dB ~ +10dB
SC LEV : -10dB ~ +10dB
SL LEV : -10dB ~ +10dB
SW LEV : -10dB ~ +10dB
FL LEV: Sets the level of Front L speaker.
C LEV: Sets the level of Center speaker.
FR LEV: Sets the level of Front R speaker.
SR LEV: Sets the level of Surround R speaker.
SC LEV: Sets the level of Surround center speaker.
SL LEV: Sets the level of Surround L speaker.
SW LEV: Sets the level of Subwoofer.
6. HDMI OUT
HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for
an easy all-digital output to an HDMI or DVI-equipped
TV. Set the HDMI OUT sound output to TV or SPK.
6 . HDMI OUT
HDMI OUT : TV / SPK
HDMI OUT
• TV : Outputs a sound signal of component with
HDMI jack to TV.
• SPK : Outputs a sound signal of component with
HDMI jack to speakers.
7. DIGITAL IN (Setting Digital Input
Signal)
This setting determines how to set the digital signals.
7 . DIGITAL IN
Digital : AUTO / MANUAL
Digital
• AUTO : The unit changes to the selected digital
signal when received the digital signal.
The unit changes to analog signal
automatically when not received the digital
signal.
• MANUAL : The unit maintains the current mode
regardless of digital signal.
32
8. LOAD INITIAL
Enjoying the listening mode
This procedure can be used to initialize settings you
have made to their factory.
SURROUND mode
LOAD INIT : NO / YES
LOAD INIT
• NO : The unit does not initializes settings you
have to the made to their factory default
settings.
• YES : The unit initializes settings you have to the
made to their factory default settings.
While “LOAD INIT : YES” appears in the
display window, press ENTER on the
remote control. After “LOAD INTIT DONE”
appears in the display window for a while,
the unit is changed to TUNER mode.
The following is reset to their factory
settings.
- Current input source : TUNER, FM 87.5MHz
- The following is the default setting on each
function.
Function Display
-
-
-
-
-
Function Display
DVD
Opt. 1
AV
VCR
Analog
TV/STB Opt. 2
CD
Coaxial
Opt. 3
If there is no signal to the default setting,
”Analog” appears in the display window.
Default surround mode
• PCM/MP3/WMA : PL2x Music
• DD2 : PL2x Movie
• DD5 : Dolby D EX
• DD-EX : Dolby D EX
• DTS 5.1 : MATRIX 6.1
• DTS-ES : Discrete 6.1
Current LISTENING MODE
• DSP EQ LS Mode : CINEMA
• Bypass LS Mode : DSP Bypass
• Enhancer LS Mode : VSM (Virtual Speaker
Mode)
PL2x Music & NEO:6 Parameter
• PLIIx Panorama : OFF
• PLIIx Dimension (0~14) : 7
• PLIIx Center Width (0~7) : 3
• Neo:6 CGAIN : 1.0
SPEAKER LEVEL : All CH 0dB
SPEAKER DISTANCE : ALL CH 3.0M (10Feet)
AV SYNC (AUDIO DELAY) : 0 msec
SPEAKER TYPE
• Front: SMALL
• Center: SMALL
• Surround: SMALL
• Surround center: SMALL
• LFE OUT: SUBWF
X-OVER: 100Hz
NIGHT MODE (DRC) : OFF
TONE CONTROL: OFF
• BASS : 0, MIDDLE : 0, TREBLE : 0
This mode lets you specify the type of decoding for 2
channels audio sources. This unit can reproduce 2
channel sound in 5 channels through Dolby Pro Logic II;
6 channels through DTS Neo:6; or 4 channels through
Dolby Pro Logic. However, DTS 2CH sources are not
decoded by DTS Neo:6; they are output in 2 channels.
Operation
8 . LOAD INITIAL
Press RECEIVER, and then press SURROUND
repeatedly to select the 2 channel decoding
mode.
The selected sound appears in the display window.
Display
Description
PL2x MOVIE
Performs Dolby Pro Logic II
Movie mode decoding. This
setting is ideal for movies
encoded in Dolby Surround.
PL2x MUSIC
Performs Dolby Pro Logic II
Music mode decoding. This
setting is ideal for normal stereo
such as CDs.
PL2x GAME
Performs Dolby Pro Logic II
Game mode decoding.
Dolby D EX
Performs Dolby Surround Ex
(Dolby SURROUND mode decoding.
EX)
Neo:6 CINEMA
Performs the DTS Neo:6
Cinema mode decoding.
Neo:6 MUSIC
Performs the DTS Neo:6 Music
mode decoding. This setting is
ideal for normal stereo such as
CDs.
MATRIX 6.1
(DTS MATRIX ES)
Performs the DTS Matrix Ex
mode decoding.
33
DSP (Digital Sound Processor) mode
ENHANCER mode
Press RECEIVER, and then press DSP repeatedly
to select the DSP (Digital Sound Processor) mode
you want.
The selected sound appears in the display window.
This mode enhances the sound quality of compressed
input signal (MP3, WMA, etc) from front speakers and
subwoofer.
Display
Description
CINEMA
Reproduces the powerful sound of
movie theater.
Press RECEIVER, and then press ENHANCER
repeatedly to enhance the sound quality.
BIG HALL
Reproduces the exciting sound of
movie concert halls.
CLUB
Reproduces the normal music
sound.
JAZZ
Reproduces the acoustics of a jazz
club.
ARENA
Reproduces the feeling of a sport
ground.
STADIUM
Reproduces the feeling of sports
open-air stadium.
BYPASS mode
Press RECEIVER, and then press BYPASS
repeatedly to select 2 channel sound from front
speakers or subwoofer.
The selected sound appears in the display window.
Display
Description
DSP BYPASS
Reproduces the DSP bypass mode
with bass management from front
speakers and subwoofer.
STEREO
Reproduces the 2 or 2.1 channel
bypass sound in multi channel from
front speakers and subwoofer.
PURE BYPASS Reproduces the pure bypass mode
with no bass management from front
speakers.
34
Display
Description
VSM-3D
Reproduces the 3D sound effect
when the input source is selected 2
or 2.1 channel.
VSM-ES
Reproduces the 3D sound effect
when the input source is selected 5.1
channel or more.
MUSIC
ENHANCER
Reproduces the compounded the
high-frequency. This mode has an
effect on the section of Bit rate and
Sampling frequency as shown below.
- Bit rate : 80-96Kbps
- Sampling frequency : 32 - 44.1 kHz
About Listening mode
The following table lists all the listening modes and shows which modes can be selected for each input signal
format.
(O: Active, X: Inactive)
Input Signal
Front L
Front R
Channels
Signal
Function
Buttons
BYPASS
SURROUND
DSP
ENHANCER
Listening
mode
Front L/R
Center
Front L
Rear L/R Front R
Rear back
RCA/
TUNER/
spdif/
HDMI/
HDMI
USB/
PC-LINK/
Portable
spdif/
HDMI
DTS
3/2.1
(96/24)
Front L/R
Front L/R
Front L/R
Center
Center
Center
Rear L/R
Rear L/R
Rear L/R
Rear back
spdif/
HDMI
spdif/
HDMI
Operation
Dolby Digital
PCM
Analog/
Multi
No
DD-EX
PCM/
Surround
Channel surround
3/3.1
MP3/
WMA
Sound Format
ES6.1
3/3.1
Front L/R
Center
Rear L/R
Rear back
spdif/
HDMI
spdif/
HDMI
DSP BYPASS
O
O
O
O
O
O
O
STEREO
O
O
O
O
O
O
O
PURE BYPASS
O
O
O
O
O
O
O
PL2x MOVIE
O
X
O
X
X
X
X
PL2x MUSIC
O
X
O
O
O
O
O
PL2x GAME
O
X
O
X
X
X
X
Dolby D EX
X
X
X
O
O
X
X
Neo:6 CINEMA
O
X
O
X
X
X
X
Neo:6 MUSIC
O
X
O
X
X
X
X
MATRIX 6.1
X
X
X
X
X
O
X
CINEMA
O
O
O
O
O
O
O
BIG HALL
O
O
O
O
O
O
O
CLUB
O
O
O
O
O
O
O
JAZZ
O
O
O
O
O
O
O
ARENA
O
O
O
O
O
O
O
STADIUM
O
O
O
O
O
O
O
VSM-3D
O
X
O
X
X
X
X
VSM-ES
X
X
X
O
X
O
X
MUSIC ENHANCER
O
X
X
X
X
X
X
Note
• If you press the SURROUND to select the surround mode when you connect the headphone, the mode is
changed to bypass mode.
-“HP DOWNMIX” appears in the display window.
• If you select the PURE BYPASS mode by pressing the BYPASS on the remote control repeatedly during playing
the DD-EX, the “EX” indicator does not appear in the display and outputs the 5.1 ch source except for surround
center speaker.
35
Adjusting the speaker level
You can adjust the level of each speaker.
1. Press RECEIVER, and then press SPK LEVEL.
b / B to adjust the level of each
2. Use v / V/b
speaker.
For details, see “5. SPK LEVEL (Setting speaker
level)” on the page 32.
To cancel it, press SPK LEVEL again.
AV Sync. (Adjusting the audio
delay)
You may compensate for the difference through the
use of delay settings in your listening position.
The audio delay is adjusted from 0msec to 300msec
in 10msec steps.
1. Press RECEIVER, and then press AV SYNC..
“AV SYNC: xxx ms” appears in the display window.
2. Use v / V to adjust the audio delay.
TEST TONE
To cancel it, press AV SYNC. again.
This section explains how to output test tone
sequentially from each speaker.
You can adjust the speaker level and volume while
listening the test tone from listening position.
• This function is not operated on the TUNER,
1. Press RECEIVER, and then press TEST TONE.
It appears in sequence as shown below.
TEST TONE FL → TEST TONE C → TEST TONE
FR → TEST TONE SR → TEST TONE SC → TEST
TONE SL → TEST TONE SW → TEST TONE FL...
2. Adjust the speaker level and volume while
listening the test tone.
To cancel it, press TEST TONE again.
Note
The speakers cannot be calibrated while the output of
the unit is muted, while a pair of headphones is
connected.
Notes
PORTABLE, USB and PC-LINK mode.
• Use this function during playing a video file.
• This function has no effect on when you set HDMI
OUT to TV on the SETUP menu and a signal is
outputted to VCR REC. OUT L/R .
Adjusting the tone control
You can adjust the bass, middle, and treble level.
The level is adjusted from -10dB to +10dB in 2dB
steps and displayed from MIN (-5) through MAX (+5)
in the display window.
1. Press RECEIVER, and then press TONE CTRL
repeatedly.
“TONE CTRL OFF” or “TONE CTRL ON” appears
in the display window.
2. Press ENTER and then use b / B to select
bass, middle, or treble level.
3. Use v / V to adjust the bass, middle, or treble
level and then press ENTER.
Note
If you press any buttons except for MASTER
VOLUME knob and VOLUME (-/+) buttons during
adjusting the levels, the unit moves to the previous
mode.
36
With the NIGHT function, you can reduce the dynamic
range of Dolby Digital material so that you can still
hear quiet parts even when listening at low volume
levels—ideal for watching movies late at night when
you don’t want to disturb anyone.
1. Press RECEIVER, and then press NIGHT
repeatedly to select:
[NIGHT : OFF] - Late Night function off.
[NIGHT : STD] - Small reduction in dynamic
range.
[NIGHT : MAX] - Big reduction in dynamic range.
Note
The effect of the NIGHT function depends on the
Dolby Digital material that you are playing, and with
Storing the settings
1. Press RECEIVER, and then press M1, M2, or
M3 on the unit.
“M1 (M2 or M3) LOAD?” appears in the display
window.
Operation
Using the NIGHT function
(Dolby Digital only)
2. Press v / V.
“M1 (M2 or M3) SAVE?” appears in the display
window.
3. Press ENTER.
After “M1 (M2 or M3) SAVE OK” appears in the
display window for a while, the unit is stored to the
settings you set.
Loading the settings
1. Press M1, M2, or M3 to load the stored
settings.
“M1 (M2 or M3) LOAD?” appears in the display
window.
some material there will be little or no effect.
M1, M2, M3
2. Press ENTER.
After “M1 (M2 or M3) LOAD OK” appears in the
display window for a while, the unit loads the
settings you set.
This section explains how to load and stores various
settings on this buttons you set at one time.
The following is the stored items on the M1, M2, or
M3 buttons.
- Input source (Tuner, DVD, Portable, VCR, CD, AV,
TV/STB, USB, PC-LINK, HDMI 1/ HDMI 2)
- Input mode (Opt. 1, Opt. 2, Opt. 3, Coaxial, Analog)
- Listening mode
• Surround mode (PL2x MOVIE, PL2x MUSIC,
PL2x GAME, Neo:6 CINEMA, Neo:6 MUSIC,
Neo:6 MUSIC)
• DSP (Digital Sound Processor) mode (CINEMA,
BIG HALL, CLUB, JAZZ, ARENA. STADIUM)
• BYPASS mode (DSP BYPASS, STEREO, PURE
BYPASS)
• ENHANCER mode (VSM-3D, VSM-ES, MUSIC
ENHANCER)
- Speaker level (FL/C/FR/SR/SC/SL/SW)
- AV SYNC
- X - OVER
- NIGHT mode
- TONE CONTROL (BASS, MIDDLE, TREBLE)
- Radio frequency
Note
This function is not supported the mode of Audyssey
2EQ on and off.
37
Reference
Mini Glossary for Audio Stream & Surround mode
Dolby Digital EX
Dolby Pro Logic IIx
Dolby Digital EX creates 6 full-bandwidth output
channels from 5.1-channel sources. This is done
using a matrix decoder that drives three surround
channels from the two in the original recording. For
best results, Dolby Digital EX should be used with
movies soundtracks recorded with Dolby Digital
Surround EX.
Dolby Pro Logic IIx is the latest extension of Dolby
Pro Logic II technology that creates a discrete 6.1
sound field from matrix surround or two-channel music
stereo sources in systems configured for surround
center speaker.
Dolby Digital
Audyssey 2EQ removes sound distortion by
equalizing your sound system for your listening room.
A good loudspeaker is designed to deliver sound
without distortion or coloration. But when speakers are
placed in a room, things change. Walls, furniture, and
other objects reflect and absorb the sound from your
speakers, creating complex distortions, specific to
your room, which could not be predicted by the
loudspeaker designer. Audyssey 2EQ is the first
technology to properly measure sound information
throughout your listening area and then combine this
information to accurately represent the acoustical
problems in the room. Based on these measurements,
2EQ calculates an equalization solution that corrects
for both time and frequency response problems in
every seat. The 2EQ solution results in better sound
in every seat and a listening experience unlike
anything you have heard before.
Audyssey 2EQ is a trademark of Audyssey
Laboratories, Inc.
Dolby Digital is the multi- channel digital signal format
developed by Dolby Laboratories. Discs bearing the
DOLBY
D I G I T A L
“
” includes the recording of up to 5.1 channels of
digital signals, which can reproduce much better
sound quality, spatial expansion and dynamic range
characteristics than the previous Dolby Surround
effect.
Dolby Surround Pro Logic
Dolby Pro Logic is a specially encoded two channel
surround format which consists of four channels ( front
left, center, front right and surround). Sources bearing
the Dolby Surround Pro Logic provide the theater like surround sound. The surround channel is
monaural, but is played through two surround
speakers.
Dolby Pro Logic II
This mode applies conventional 2- channel signals
such as digital PCM or analog stereo signals as well
as Dolby Surround signals, etc. to surround
processing to offer improvements over conventional
Dolby Pro Logic circuits. Dolby Pro Logic II surround
includes two modes as follows:
•
Dolby Pro Logic II MOVIE
When enjoying movies, this mode allows you to
further enhance the cinematic quality by adding
processing that emphasizes the sounds of the
action special effects.
•
Dolby Pro Logic II MUSIC
When listening to music, this mode allows you to
further enhance the sound quality by adding
processing that emphasizes the musical effects.
•
Dolby Pro Logic II GAME
When listening to game, this mode allows you to
further enhance the sound quality by adding
processing that emphasizes the dynamic effects.
38
Audyssey
DTS / DTS-ES | Neo:6
DTS Neo : 6™surround
“DTS” and “DTS-ES | Neo:6” are registered
trademarks of DTS, Inc. “96/24” is a trademark of
DTS, Inc.
This mode applies conventional 2-channel signals such as
digital PCM or analog stereo signals to the high precision
digital matrix decoder used for DTS-ES Matrix 6.1 to
achieve 6.1-channel surround playback. DTS Neo : 6
surround includes two modes for selecting the optimum
decoding for the signal source.
DTS - ES Extended Surround™
This is a new multi channel digital signal format which
greatly improves the 360- degree surround impression
and space expression thanks to further expanded
surround signals, offering high compatibility with the
conventional DTS format.
In addition to the 5.1 channels, DTS-ES Extended
Surround also offers the surround center (sometimes
also referred to as “surround center”) channel for
surround playback with a total of 6.1 channels. DTS-ES
Extended Surround includes two signal formats with
different surround signal recording methods as follows:
• DTS-ES™ Discrete 6.1
Because the signals for 6.1 channels (including the
surround center channel) are fully independent, it is
possible to achieve a sense that the acoustic image are
moving about freely among the background sounds
surrounding the listener from 360 degrees. Though
maximum performance is achieved when sound tracks
recorded with this system are played using a DTS -ES
decoder, when played with a conventional DTS decoder,
the surround center channel signals are automatically
down mixed to the surround left and surround right
channels so that none of the signal components are lost.
• DTS - ES™Matrix 6.1
With this format, the additional surround center channel
signals undergo matrix encoding and are input to the
surround left and surround right channels beforehand.
During playback, they are decoded to the surround left,
surround right and surround center channels. Because
the bit stream format is 100% compatible with
conventional DTS signals, the effect of the DTS-ES Matrix
6.1 format can be achieved even with DTS 5.1 - channel
signal sources. Of course, it is possible to play DTS-ES
Matrix 6.1 - channel signal sources with a DTS 5.1 channel decoder. When DTS-ES Discrete 6.1 or Matrix
6.1 sources are decoded with a DTS - ES decoder, the
format is automatically detected upon decoding and the
optimum surround mode is selected. However, some DTS
- ES Matrix 6.1 sources may be detected as DTS
sources. In this case, the DTS - ES Matrix mode must be
selected manually to play these sources.
Reference
Mini Glossary for Audio Stream & Surround mode
• DTS Neo : 6 CINEMA
This mode is optimum for playing movies. Decoding is
performed with emphasis on separation performance to
achieve the same atmosphere with 2-channel sources as
with 6.1-channel sources.
• DTS Neo : 6 MUSIC
This mode is suited mainly for playing music. The
front left and front right signals bypass the decoder
and are played directly so there is no loss of sound
quality, and the effect of the surround signals from
the center, surround left, surround right and
surround center channels adds a natural sense of
expansion to the sound field.
“DTS”, “DTS-ES Extended Surround” and “Neo : 6”
are trademarks of Digital Theater Systems,Inc.
DTS Digital Surround
DTS was introduced in 1994 to provide 5.1 channels
of discrete digital audio into home theater systems.
DTS brings you premium quality discrete
multi-channel digital sound to both movies and music.
DTS is a multi-channel sound system designed to
create full range digital sound reproduction.
The no compromise DTS digital process sets the
standard of quality for cinema sound by delivering an
exact copy of the studio master recordings to
neighborhood and home theaters.
"DTS"and "DTS Digital Surround" are registered
trademarks of Digital Theater Systems, Inc.
In DTS - ES Discrete 6.1, DTS -ES Matrix 6.1 sources,
the surround center channel is monaural, but can be
played through a surround center speaker.
39
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
PROBLEM
No power.
No sound.
No sound from the
surround speakers.
POSSIBLE CAUSE
• Connect cord securely.
• Poor connection at AC wall outlet or the
outlet is dead or off.
• Check the outlet using a lamp or
another appliance.
• The speaker wires are disconnected.
• Check the speaker connections.
• The MASTER VOLUME is adjusted too low.
• Adjust the MASTER VOLUME.
• The MUTE button is pressed to ON.
• Press the MUTE button to cancel the
muting effect.
• The selected decoding mode is not
matched to the input signal format.
• Select the available decoding mode.
• Incorrect selection of input source.
• Select the desired input source
correctly.
• Incorrect connections between the
components.
• Make connections correctly.
• The USB cable is separated during
playing a file on the PC-LINK mode.
• Execute a media player again.
• Surround mode is switched off (normal
stereo mode).
• Select a surround mode.
• MASTER VOLUME and surround level
are too low.
• Monaural source is used.
• Surround speaker setting is “NONE”.
No sound from the
(front) center speaker.
No sound from the
surround center
speakers.
Stations cannot be
received.
Preset stations cannot
be received.
Poor FM reception.
Remote control does
not operate.
40
REMEDY
• The AC input cord is disconnected.
• Adjust MASTER VOLUME and
surround level.
• Select a stereo or surround source.
• Select the desired surround speaker
setting.
• Dolby Virtual, normal stereo mode, etc
is selected.
• Select the desired surround mode.
• MASTER VOLUME and center level are
too low.
• Adjust MASTER VOLUME and center
level.
• The input signal format or the current
surround mode cannot support the 6.1
surround.
• Under the proper situations, perform
the 6.1 surround playback.
• MASTER VOLUME and surround center
level are too low.
• Adjust MASTER VOLUME and
surround center level.
• No antenna is connected.
• Connect an antenna.
• The desired station frequency is not
tuned in.
• Tune in the desired station frequency.
• Antenna is in wrong position.
• Move antenna and retry tuning.
• An incorrect station frequency has been
memorized.
• Memorize the correct station
frequency.
• The memorized stations are cleared.
• Memorize the stations again.
• No antenna is connected.
• Connect an antenna.
• The antenna is not positioned for the
best reception.
• Change the position of the antenna.
• Batteries are not loaded or exhausted.
• Replace the batteries.
• The remote sensor is obstructed.
• Remove the obstacle.
Specifications
General
Refer to main label.
130 W
4.94 kg
430 x 150 x 300 mm (W x H x D)
Temperature: 5°C to 35°C
Reference
Power supply
Power consumption
Net Weight
External dimensions
Operating conditions
Amplifier
Frequency response
Signal-to-noise ratio
10 - 22000 Hz
More than 80 dB (Analog : 1 kHz, NOP -3 dB, 20 kHz LPF/A-Filter)
More than 95 dB (Digital : 1 kHz, NOP -3 dB, 20 kHz LPF/A-Filter)
More than 70 dB (PC-LINK : 1 kHz, NOP -3 dB, 20 kHz LPF/A-Filter)
(Y) 1.0 V, (PB)/(PR) 0.7 V
COMPONENT VIDEO OUT
Output Power
AR702TT/AR702TS model
Front
140 W + 140 W (10% THD, 8Ω, 20 kHz LPF)
100 W + 100 W (0.2% THD, 8Ω, 20 kHz LPF)
Center
140 W (10% THD, 8Ω, 20 kHz LPF)
100 W (0.2% THD, 8Ω, 20 kHz LPF)
Surround
140 W + 140 W (10% THD, 8Ω, 20 kHz LPF)
100 W + 100 W (0.2% THD, 8Ω, 20 kHz LPF)
Surround Center
140 W (10% THD, 8Ω, 20 kHz LPF)
100 W (0.2% THD, 8Ω, 20 kHz LPF)
Active Subwoofer
250 W (10% THD, 4Ω, 20 kHz LPF)
200 W (0.8% THD, 4Ω, 20 kHz LPF)
AR702BR model
Front
70 W + 70 W (10% THD, 8Ω, 20 kHz LPF)
Center
70 W (10% THD, 8Ω, 20 kHz LPF)
Surround
70 W + 70 W (10% THD, 8Ω, 20 kHz LPF)
Surround Center
70 W (10% THD, 8Ω, 20 kHz LPF)
Active Subwoofer
250 W (10% THD, 4Ω, 20 kHz LPF)
Inputs
VCR IN, TV/STB IN, DVD IN, CD IN , OPTICAL 1/2/3 IN,AV IN
COMPONENT VIDEO IN (DVD, TV/STB), COAXIAL IN,
HDMI 1/2 IN, USB, PC-LINK, PORTABLE IN
Outputs
MONITOR OUT, COMPONENT VIDEO OUT, HDMI OUT
T.H.D
Less than 0.05 % (1W, 20kHz LPF)
Tuner
FM
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz
10.7 MHz
60 dB (Mono)/ 55 dB (Stereo)
140 - 10000 Hz
AM
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
522 - 1620 kHz or 520 - 1720 kHz
450 kHz
30 dB
140 - 1800 Hz
41
Speaker
Front Speaker
(SR72TT-F)
Type
Bass Reflex 2 Way
2 Speaker System
Impedance
Surround Speaker
(SR72TT-F)
Sealed Type 2 Way
3 Speaker System
Bass Reflex 2 Way
3 Speaker System
8Ω
Frequency Response
40 - 20000 Hz
Sound Pressure Level
83 dB/W (1m)
8Ω
8Ω
80 - 20000 Hz
40 - 20000 Hz
81 dB/W (1m)
83 dB/W (1m)
Rated Input Power
140 W
140 W
140 W
Max. Input Power
280 W
280 W
280 W
Net Dimensions (W x H x D)
Net Weight (1EA)
Type
Impedance
206 x 1003 x 270.5 mm
391 x 147.5 x 190.5 mm 206 x 1003 x 270.5 mm
17.8 kg
3.21 kg
17.8 kg
Surround Center Speaker (SR72TT-B)
Active subwoofer (SR72TT-A)
Bass Reflex 2 Way 2 Speaker System
8Ω
Bass Reflex 1 Way 1 Speaker System
4Ω
Frequency Response
80 - 20000 Hz
30 - 1000 Hz
Sound Pressure Level
81 dB/W (1m)
81 dB/W (1m)
Rated Input Power
140 W
250 W
Max. Input Power
280 W
500 W
321 x 148 x 158.5 mm
266 x 343 x 406 mm
2.48 kg
11.28 kg
Net Dimensions (W x H x D)
Net Weight (1EA)
Front Speaker
(SR72TS-F)
Bass Reflex 2 Way
3 Speaker System
Type
Impedance
Center speaker
(SR72TS-C)
Sealed Type 2 Way
3 Speaker System
8Ω
Frequency Response
40 - 20000 Hz
Sound Pressure Level
83 dB/W (1m)
Surround Speaker
(SR72TS-L)
Bass Reflex 2 Way
2 Speaker System
8Ω
8Ω
80 - 20000 Hz
80 - 20000 Hz
81 dB/W (1m)
81 dB/W (1m)
Rated Input Power
140 W
140 W
Max. Input Power
280 W
280 W
280 W
206 x 1003 x 270.5 mm
391 x 147.5 x 190.5 mm
146 x 238 x 183.5 mm
17.8 kg
3.21 kg
2.2 kg
Net Dimensions (W x H x D)
Net Weight (1EA)
Type
Impedance
140 W
Surround Center Speaker (SR72TS-B)
Active subwoofer (SR72TS-A)
Bass Reflex 2 Way 2 Speaker System
8Ω
Bass Reflex 1 Way 1 Speaker System
4Ω
Frequency Response
80 - 20000 Hz
30 - 1000 Hz
Sound Pressure Level
81 dB/W (1m)
81 dB/W (1m)
Rated Input Power
140 W
250 W
Max. Input Power
280 W
500 W
321 x 148 x 158.5 mm
266 x 343 x 406 mm
2.48 kg
11.28 kg
Net Dimensions (W x H x D)
Net Weight (1EA)
42
Center speaker
(SR72TT-C)
Type
Impedance
Center speaker
(SR72BR-B)
Bass Reflex 2 Way
2 Speaker System
8Ω
Frequency Response
80 - 20000 Hz
Sound Pressure Level
81 dB/W (1m)
Surround Speaker
(SR72BR-S)
Bass Reflex 1 Way
1 Speaker System
8Ω
8Ω
80 - 20000 Hz
100 - 20000 Hz
81 dB/W (1m)
81 dB/W (1m)
Rated Input Power
70 W
70 W
70 W
Max. Input Power
140 W
140 W
140 W
146 x 238 x 183.5 mm
321 x 148 x 158.5 mm
114 x 186 x 146 mm
2.2 kg
2.48 kg
1.2 kg
Net Dimensions (W x H x D)
Net Weight (1EA)
Type
Impedance
Surround Center Speaker (SR72BR-S)
Active subwoofer (SR72BR-A)
Bass Reflex 1 Way 1 Speaker System
8Ω
Bass Reflex 1 Way 1 Speaker System
4Ω
Frequency Response
100 - 20000 Hz
30 - 1000 Hz
Sound Pressure Level
81 dB/W (1m)
81 dB/W (1m)
Rated Input Power
70 W
250 W
Max. Input Power
140 W
500 W
114 x 186 x 146 mm
266 x 343 x 406 mm
1.2 kg
11.28 kg
Net Dimensions (W x H x D)
Net Weight (1EA)
Reference
Front Speaker
(SR72BR-L)
Bass Reflex 2 Way
2 Speaker System
43
P/NO : MFL39518847
Download PDF