LG | WF-28A10TM | LG WF-32A20TM Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
cover
information to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0006E
(MC61A/B,
004D
TX)
and quote this
require service.
Contents
Installation
3
Location and function of controls
4
Remote control handset
Battery installation
Front panel
Basic
7
operation
On and off
Programme selection
adjustment / Mute
Volume
On
function
8
screen menus
Menu selection
Setting up
TV stations
10
Auto programme tuning / Manual programme
Fine tuning / Programme edit
Picture
tuning
14
adjustment
Sound
adjustment
Sound adjustment
Stereo/Dual reception
NICAM reception / Sound output
15
selection
Other functions
17
TV and AV modes / Child lock
Sound
YNR
system setting / Colour system setting
(Luminance Noise Reduction) / Sleep timer
Picture format selection
Time
20
setting
Clock
On/off time
Auto
PIP
sleep
21
operation (option)
On and off
Input mode selection for sub picture
Swapping between main and sub picture
Sub picture freeze / Sub picture position change
Sub picture size / Programme selection for sub picture
PIP search / Strobe
Teletext
23
(option)
Switch on/off
LIST mode
TOP mode
(option)
FASTEXT mode
Special
teletext functions
Connection of external
equipment
26
Aerial socket
Audio/Video in/out sockets
S-video/Audio in sockets
Troubleshooting
2
check list
(S-AV)
27
Installation
Power
This set
operates
indicated
on
on
the label
an
on
AC mains
the back
the set. In the event of thunderstorms
out the aerial and mains
the voltage is as
apply DC power to
powercuts, please pull
supply,
Never
cover.
or
plugs.
Warning
To
prevent fire
shock
or
hazard, do
not expose the set to rain
or
moisture.
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set
onto the
so
that
no
bright light
or
sunlight
falls
directly
Care should be taken not to expose the set to
any unnecessary vibration, moisture, dust or heat. Also ensure that
the set is placed in a position to allow a free flow of air. Do not
cover
screen.
the ventilation
openings
on
the back
cover.
3
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions
can
also be
panel
adjusted
with the buttons
on
the front
of the set.
Remote control handset
Before you use the remote control
batteries. See the next page.
1
POWER
MUTE
2
1.
POWER
switches the set
3
on
from
standby
or
off to
standby.
ARC
2.
123
MUTE
switches the sound
TV/AV
4
on or
off.
456
MENU
3.
789
4.
PR
0
5
ARC
(Aspect Ratio Control)
changes the picture format.
NUMBER BUTTONS
switch the set
PIP
VOL
OK
5.
PIP BUTTONS
PR
PR-
PR+
on
from
standby
VOL
TEXT
directly
or
select
a
number.
(option)
PIP
SWAP INPUT
switches the sub
picture
on or
off.
PR+/-
6
selects
7
5
handset, please install the
PSM
SSM
SIZE
STILL
DUAL
SLEEP
PIP
M
REW
PLAY
FF
CH-
CH+
STOP
REC
picture.
INPUT
STROBE
POWER
picture.
alternates between main and sub
POSITION 9/4PIP
T
X
T
programme for the sub
a
SWAP
selects the
input
mode for the sub
picture.
SIZE
changes
the sub
picture
size.
STILL
freezes motion of the sub
picture.
POSITION
relocates the sub
picture
in clockwise direction.
9/4 PIP
searches the stored stations
on
9
or
4 sub
pictures.
STROBE
sequentially displays
4 sub pictures.
6.
SSM
a
freeze frame of the main
(Sound Status Memory)
preferred sound setting.
recalls your
7.
PSM
(Picture Status Memory)
preferred picture setting.
recalls your
4
picture
on
9
or
Location and function of controls
8. TV/AV
selects TV
or
AV mode.
9. MENU
displays
or
clears the main
returns to the
10. Δ / Ε
previous
menu.
menu.
(Programme Up/Down)
on from standby.
switches the set
selects
a
programme
or a menu
POWER
item.
MUTE
Φ / Γ
(Volume Down/Up)
adjusts the volume.
selects
a menu
icon in the Main
ARC
123
menu or
adjusts
menu
settings.
OK
accepts your selection
11. TELETEXT BUTTONS
These buttons
For further
are
details,
or
displays
8
MENU
9
789
the current mode.
PR
0
(option)
PIP
used for teletext.
see
TV/AV
456
VOL
the 'Teletext' section.
OK
VOL
10
TEXT
PR
12. DUAL
selects the
selects
PR-
language during dual language broadcast.
sound during stereo broadcast.
PR+
SWAP INPUT
11
mono
12
13. SLEEP
sets the
sleep
timer.
14. VCR BUTTONS
control
Note
:
an
POSITION,
SSM
SIZE
STILL
T
X
T
LG video cassette recorder.
In teletext
PSM
DUAL
SLEEP
PIP
STROBE
are
used for teletext
11
M
POWER
REW
PLAY
FF
CH-
CH+
STOP
REC
mode, the PR+/-, SWAP, INPUT, SIZE, STILL,
9/4 PIP and STROBE buttons
13
POSITION 9/4PIP
14
function.
Battery
installation
The remote control handset is
powered by two AA type batteries.
Gently pull down the cover of the remote control handset until the
battery compartment is exposed. Install two batteries as indicated
by the polarity symbols( and ) marked inside the compartment.
Note
:
To avoid
damage
from
batteries if you do not plan to
extended period of time.
possible battery leakage,
use
remove
the
the remote control handset for
an
5
Location and function of controls
Front
panel
WF-28A10 series
89
1
10
AUDIO
S-VIDEO
VIDEO
L(MONO)
R
ARC
MENU
OK
VOL
POWER
PR
INPUT 3
2
3
456
7
WF-28/32A20 series
1
S-VIDEO
VIDEO
OK
MENU
ARC
POWER
VOL
VOL
PR
PR
L(MONO)-AUDIO-R
INPUT3
10
1.
2
3
456
7
98
S-VIDEO/AUDIO IN SOCKETS
Connect the video out socket of an S-VIDEO VCR to the SVIDEO socket. Connect the audio out sockets of the S-VIDEO
VCR to the audio sockets
2.
as
in INPUT3.
AUDIO/VIDEO IN SOCKETS (INPUT3)
Connect the audio/video out sockets of external
equipment
to
these sockets.
3.
4.
ARC
(Aspect Ratio Control)
changes the picture format.
MENU
displays
or
clears the main
returns to the
5.
previous
OK
accepts your selection
6.
or
the current mode.
a menu
icon in the Main
menu or
adjusts
Δ / Ε
(Programme Up/Down)
switches the set on from standby.
selects
a
programme
or a menu
8.
REMOTE CONTROL SENSOR
9.
STANDBY INDICATOR
illuminates red when the set is in
10. MAIN POWER
switches the set
6
displays
Φ / Γ (Volume Down/Up)
adjusts the volume.
selects
7.
menu.
menu.
on or
off.
item.
standby
mode.
menu
settings.
Basic
operation
On and off
1.
2.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER
control
3.
Δ / Ε
handset,
standby
on
If, while the
:
is
again
fully.
to switch the set off.
standby
power
the mains power socket.
replaced in
on
the remote control handset.
set is switched on, the mains
nected the set will switch to
plug
the remote
mode.
Press the main power button
Note
on
NUMBER buttons to switch it
Press the POWER button
The set reverts to
4.
or
or
on
plug
is discon-
POWER
MUTE
when the mains
123
456
Programme
selection
You
a
can
select
programme number with the Δ / Ε
or
NUMBER
buttons.
789
PR
0
VOL
Volume
adjustment
Press the Φ / Γ button to
VOL
PR
adjust
the volume.
Mute function
Press the MUTE button. The sound is switched off and the
appears. You
or
can
cancel it
by pressing
the
MUTE,
Φ /
display
Γ,
SSM
DUAL
SSM
DUAL button.
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
1.
Press the MENU button to
2.
Press the Φ / Γ button to select the desired
The selected
3.
4.
item
Press the Φ / Γ button
OK button to
menu.
menu
icon.
changes from green to purple.
display the selected menu.
Press the Δ / Ε button to select
menu
the Main
icon
Press the OK button to
The selected
5.
menu
display
display
item.
a menu
changes from green to purple.
to change the setting of a menu
the sub
item
menu.
MENU
PR
VOL
OK
Fine++tuning
Auto+programme
Manual+programme
Programme++edit
VOL
PR
++
R
GBF
¡(),OK+++Exit:MENUTM
Station
menu
'+Contrast+++100
'+Bright++++++50
・+Colour++++++50
≥+Sharpness+++50
++
++
μμμμμμμμμμμμμμμμμμμμ
R
R
GBF
GBF
¡}{,OK+++Exit:MENUTM
Main
menu
¡(),}{,OK+Exit:MENUTM
Picture
menu
Treble+++++++50
Bass+++++++++50
Balance+++++++0
º Surround++++Off
UBB+++++++++Off
∞¶
¢
++
μμμμμμμμμμμμμμμμμμμμ
R
GBF
¡(),}{,OK+Exit:MENUTM
Sound
8
menu
or
On
screen menus
Input++++++++:TV
Child+lock+++:Off
Sound+system+:BG¡5.5TM
Colour+system:Auto
YNR+
+++++:On
++
R
GBF
¡(),}{+++Exit:MENUTM
Function
menu
++
R
GBF
¡}{,OK+++Exit:MENUTM
Main
Clock+set
menu
On++time+set
Off+time+set
Auto++sleep
++
MENU
R
GBF
¡(),OK+++Exit:MENUTM
PR
Clock
menu
VOL
Note
a.
:
The
OK
VOL
PR
menus
in about 10 seconds if you
button. However if you press the MENU button
automatically disappear
do not press a
the Main
again,
menu
will appear with your last selected
menu
icon.
b.
In the TV
mode, all
green and
some menu
c.
In the AV
are
menu
icons of the Main
all available. But in the AV
icons appear in blue and
are
appear in
teletext mode,
menu
or
not available.
mode, Sound system of the Function
menu
is not
menu
is not
displayed.
d.
In the teletext
mode, Sharpness of the Picture
displayed.
9
Setting up
Up
able to
++
R
GBF
to 100 TV stations
numbers
Fine++tuning
Auto+programme
Manual+programme
Programme++edit
TV stations
to
(0
use
99).
be stored in this set
can
Once you have
the Δ / Ε
or
by programme
preset the stations, you will be
NUMBER buttons to
scan
the stations you
programmed.
Stations
can
be tuned
automatic
using
or
manual modes.
¡(),OK+++Exit:MENUTM
Auto programme
All stations that
can
tuning
be received
recommended that you
this set.
123
456
MENU
789
use
are
stored
by this
during
auto programme
1.
Press the MENU button to
2.
Press the Φ / Γ button to select the Station
3.
Press the OK button to
4.
Press the Δ / Ε button to select Auto programme.
5.
Press the OK button to
display
display
begin
the Main
method. It is
installation of
the Station
auto
menu.
menu
icon
.
menu.
programming.
PR
0
The band
VOL
OK
VOL
automatically changes
VHF-L
VHF-H
When auto
programming
UHF.
PR
is
completed,
programme number 1 will appear
menu
on
the
the station stored into
screen
with the Station
displayed.
To
stop auto programming, press the OK button. The station
stored into programme number 1 will appear on the screen with the
Station menu displayed.
Note
:
unclear
Some undesired stations may be stored, such as noisy or
signals from distant transmitters. You can easily skip these
stations
10
by entering Programme edit mode.
Setting up
Manual programme
TV stations
tuning
Manual programme lets you manually tune and arrange the
stations in whatever order you desire.
Fine++tuning
Auto+programme
Manual+programme
Programme++edit
++
R
1. Press the MENU button to
display the
Main
2. Press the Φ / Γ button to select the Station
3. Press the OK button to
display
the Station
GBF
menu.
menu
icon
¡(),OK+++Exit:MENUTM
.
menu.
4. Press the Δ / Ε button to select Manual programme.
5. Press the OK button to
display the
Manual programme mode.
Programme++01
Band++++++VHF_L
Search
Store+:
¡(,)TM
¡},{TM
123
To+select
To+change
456
R
GBF
MENU
789
¡Exit:MENUTM
/ Ε
6. Press the Δ
button to select
Select the
Programme.
desired programme number with the Φ / Γ button
or
VOL
buttons.
7. Press the Δ / Ε button to select Band. Press the Φ / Γ button
to select
VHF-L, VHF-H
or
UHF
as
searching.
commence
To
OK
VOL
PR
required.
8. Press the Δ / Ε button to select Search. Press the Γ
to
PR
0
NUMBER
stop the search
button
at any time press
the OK button.
9. If this station is the
one
required
select the last
menu
item
StorewiththeΔ/ΕbuttonandthenstoreitwiththeΦ/Γ
button.
10. To store another station
11.
Repeatedly
viewing.
Fine
6 to 9.
tuning
Normally
1.
repeat steps
press the MENU button to return to normal TV
fine
tuning
Repeat steps
is
only
necessary if
reception
is poor.
1 to 3 above.
2. Press the Δ / Ε button to select Fine
3. Press the OK button to
4. Press the Φ / Γ
display
tuning.
tuning
the Fine
mode.
button to fine tune for the best
picture
and
sound.
5. Press the OK button to store the
new
setting.
The
display
Stored will appear.
6. Press the MENU button twice to return to normal TV
The
finely tuned programme
during programme selection.
will be indicated
viewing.
by yellow number
11
Setting up
Programme
Fine++tuning
Auto+programme
Manual+programme
Programme++edit
¡(),OK+++Exit:MENUTM
123
edit
This function enables you to rearrange the programmes stored by
auto programming in whatever order you desire. Also you can skip
++
R
GBF
TV stations
particular programme
possible to assign a
numbers stored
station
by
auto
programming
or
it is
with five characters to each
name
programme number.
1.
Press the MENU button to
2.
Press the Φ / Γ button to select the Station
3.
Press the OK button to
4.
Press the Δ / Ε button to select
5.
Press the OK button to
display
display
display
the Main
the Station
menu.
menu
icon
.
menu.
Programme edit.
the
Programme edit
mode.
<
456
Pr.++8+++Pr.+__
>
Name++++++_____
MENU
Skip+++++++:Off
789
¡(,)TM+To+select
¡},{TM+To+change+¡0..9TM
¡OKTM +To+exchange,stop+
PR
0
R
GBF
VOL
OK
PR
VOL
¡Exit:MENUTM
Exchanging programmes
1.
Press the Φ / Γ button to
number. The
2.
viewing
change the left hand
corresponding
programme
station
to the
programme number is shown on the screen.
Press the NUMBER buttons to enter the desired
right
new
hand
programme number. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5. At this time if your set has
two tuners PIP function the selected programme appears on the
sub
3.
picture.
Press the OK button. The station stored in the
programme number will now appear
programme number and the sub picture will
4.
Repeat steps
Assigning
1.
a
1 to 3 to
station
exchange
as
the
right
hand
left
hand
disappear.
other programmes.
name
Select the programme to which you want to
name with the Φ / Γ button.
assign
a
station
2.
Press the Δ / Ε button to select Name.
3.
To select your desired first character, press the Γ button
several times or continuously. The
will blink, followed by ., +,
_
a
12
blank, the numeric 0
to
9, the alphabet A
to
Z, in
turn.
4.
With the Φ button you can select in the opposite direction.
Select the next position by pressing the OK button and then
5.
take your choice of the second character, and so on.
Repeat steps 1 to 4 to assign another station name.
Setting up
TV stations
a stored programme
Press the Φ / Γ button to select the programme you want to
skip. The viewing station corresponding to the selected
Skipping
1.
programme number is shown
on
the
Press the Δ / Ε button to select
3.
Press the Φ / Γ button to select On
4.
++
R
2.
If you select
screen.
Fine++tuning
Auto+programme
Manual+programme
Programme++edit
GBF
Skip.
or
¡(),OK+++Exit:MENUTM
Off.
On, the selected station is skipped.
NUMBER buttons is
skip another programme.
skipped programme numbers with the
still possible and they will be indicated by
blue numbers
programme selection.
Repeat steps
1 to 3 to
The selection of the
during
12
Repeatedly
press the MENU button to return to normal TV
3
viewing.
456
MENU
789
PR
0
VOL
VOL
PR
13
Picture
adjustment
You
'+Contrast+++100
'+Bright++++++50
colour
can adjust picture contrast, brightness,
sharpness to the levels you prefer.
intensity
and
・+Colour++++++50
≥+Sharpness+++50
++
1.
Press the MENU button to
2.
Press the Φ / Γ button to select the Picture
3.
Press the OK button to
4.
Press the Δ / Ε button to select the desired
5.
Press the Φ / Γ button to make
display
the Main
menu.
μμμμμμμμμμμμμμμμμμμμ
R
GBF
¡(),}{,OK+Exit:MENUTM
At this
setting
6.
display
the Picture
menu
icon
R
GB
.
menu.
picture item.
appropriate adjustments.
point you can complete your adjustments
for immediate recall by following steps 6 to 8.
or
store your
Press the OK button.
Favorite+1
MENU
Favorite+2
¡(,)TM
To+select
To+store
¡OKTM
PR
VOL
OK
PR
R
GBF
¡Exit:MENUTM
VOL
7.
Select Favorite 1
The Favorite 1
PSM
or
Favorite 2 with the Δ / Ε button.
Favorite 2
8.
options allow you to programme
picture settings for various lighting
conditions such as day and night.
Press the OK button. The display Stored will appear.
9.
Press the MENU button twice to return to normal TV
two
entirely
To recall your
desired picture
or
different
viewing.
preferred setting, press the PSM button until the
(Standard, Favorite 1 or Favorite 2) appears.
The Standard picture is programmed for good picture reproduction at the factory and cannot be changed.
14
Sound
Sound
You
adjustment
adjustment
Treble+++++++50
Bass+++++++++50
Balance+++++++0
º Surround++++Off
UBB+++++++++Off
∞¶
adjust the sound treble, bass, balance, surround and UBB
(Ultra Bass Booster) to the levels you prefer. The surround sound
can
creates
and
all around sound
an
as
in
a
concert hall and UBB stresses
sound.
emphasizes heavy
¢
++
μμμμμμμμμμμμμμμμμμμμ
R
GBF
¡(),}{,OK+Exit:MENUTM
1.
Press the MENU button to
2.
Press the Φ / Γ button to select the Sound
3.
Press the OK button to
4.
Press the Δ / Ε button to select the desired sound item.
5.
Press the Φ / Γ button to make desired
6.
Press the OK button to store. The
display
display
the Main
the Sound
menu.
menu
icon
.
menu.
adjustment.
adjusted sound
level is
stored in the Favorite sound.
Press the MENU button twice to return to normal TV
7.
viewing.
MENU
To recall your
desired sound
preferred setting, press the SSM button until the
(Standard sound, Music sound or Favorite
appears. The Standard sound and Music sound
sound)
programmed
be changed.
for
a
station
name
reproduction
at the
factory
and cannot
VOL
OK
VOL
PR
Stereo/Dual
When
sound
good
PR
are
reception
programme is selected, the sound information for the
station appears with the colour system, programme number,
(only
when it is
SSM
DUAL
set).
Broadcast
On Screen
Mono
(None)
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo
MONO
reception if the stereo signal is weak, you can switch to
by pressing the DUAL button. In mono reception the depth
of sound is
button
improved.
again.
Language selection
If
To switch back to stereo, press the DUAL
for dual
language broadcast
(dual language), you can
pressing the DUAL button
programme received in two languages
switch to DUAL I, DUAL II or DUAL I II by
a
repeatedly.
DUAL I sends the
primary
DUAL II sends the
secondary
DUAL I II sends
a
broadcast
language to the loudspeakers.
language to the loudspeakers.
broadcast
separate language
to each
loudspeaker.
15
Sound
NICAM
adjustment
reception
The
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received in the set.
Sound output can be selected according to the type of received
broadcast as follows by pressing the DUAL button repeatedly.
1.
When NICAM
NICAM
2.
mono
is
received, you
can
select MONO
FM MONO.
When NICAM stereo is
NICAM
FM
3.
or
or
received, you can select STEREO
FM MONO. If the stereo signal is weak, switch to
mono.
When NICAM dual is
II
or
DUAL I II
display MONO
or
received, you can select DUAL I, DUAL
MONO. When FM mono is selected the
appears
on
the
screen.
Sound output selection
In AV
mode, you
can
select
output sound for the left and right
loudspeakers.
Repeatedly
LR
audio
DUAL
16
output.
signal from audio L input is sent to left loudspeaker and
signal from audio R input is sent to right loud-speaker.
LL : Audio signal from audio L input is sent to left and right loudspeakers.
RR : Audio signal from audio R input is sent to left and right loudspeakers.
:
Audio
press the DUAL button to select the sound
Other functions
TV and AV modes
Inputs can be set for TV or AV mode. AV mode is used when a
video cassette recorder (VCR), or other equipment is connected to
the set.
Input++++++++:TV
Child+lock+++:Off
Sound+system+:BG¡5.5TM
Colour+system:Auto
YNR+
+++++:On
++
R
Note : When a VCR is connected via the aerial socket the set is
used in TV mode. See the 'Connection of external equipment'
section.
1.
2.
3.
4.
5.
Press
Press
Press
Press
the
the
the
the
MENU button to display the Main menu.
Φ / Γ button to select the Function menu icon F
OK button to display the Function menu.
Δ / Ε button to select INPUT.
Press the Φ / Γ button to select TV, AV1, AV2 AV3 or S-AV.
The four AV modes are :
AV 1 : VCR connected to the INPUT1 sockets on the back
GBF
¡(),}{+++Exit:MENUTM
.
,
AV 2
:
AV 3
S-AV
:
VCR connected to the INPUT2 sockets
:
on
the back
Press the MENU button twice to clear the on screen menu.
To return to TV mode from AV mode press the Δ / Ε or NUMBER
6.
buttons.
can
select the TV
or
AV mode
TV/AV
456
VCR connected to the INPUT3 sockets on the front panel
VCR connected to the AUDIO and S-VIDEO sockets on
the front panel
Alternatively you
TV/AV button.
123
the
by pressing
MENU
789
PR
0
VOL
OK
VOL
PR
Child lock
The TV
can
control it.
This feature
be set
can
so
that the remote control handset is needed to
be used to
prevent unauthorised viewing.
5.
Press the MENU button to display the Main menu.
Press the Φ / Γ button to select the Function menu icon F
Press the OK button to display the Function menu.
Press the Δ / Ε button to select Child lock.
Press the Φ / Γ button on the remote control handset to select
6.
On.
Press the MENU button twice to return to normal TV
1.
2.
3.
4.
.
viewing.
With the child lock on, the display Child lock on appears on the
screen if any button on the front panel is pressed while viewing the
TV.
Sound system
setting
If the sound is distorted
or
noisy,
reset TV
system using this
function.
1.
2.
3.
4.
5.
Press the MENU button to display the Main menu.
Press the Φ / Γ button to select the Function menu icon
Press the OK button to display the Function menu.
Press the Δ / Ε button to select Sound system.
Press the Φ / Γ button to select the correct sound
BG[5.5], I[6.0], DK[6.5]
6.
or
F
.
system,
M[4.5].
Press the MENU button twice to return to normal TV
viewing.
17
Other functions
Colour system
setting
Input++++++++:TV
Child+lock+++:Off
This set is
Sound+system+:BG¡5.5TM
Colour+system:Auto
YNR+
normal
+++++:On
++
R
GBF
¡(),}{+++Exit:MENUTM
for the main TV system in your area. Under
circumstances, select Auto. If necessary (if input signal is
weak), change the colour system by using the instructions below.
adjusted
1.
Press the MENU button to
2.
Press the Φ / Γ button to select the Function
3.
Press the OK button to
4.
Press the Δ / Ε button to select Colour
5.
Press the Φ / Γ button to select the correct colour
display
display
the Function
Auto, PAL, SECAM, NTSC4.43
6.
PR
VOL
OK
VOL
PR
menu
icon
F
.
menu.
system.
system,
NTSC3.58.
viewing.
(Luminance Noise Reduction)
This function
during viewing
reduces
picture
noise.
1.
Press the MENU button to
2.
Press the Φ / Γ button to select the Function
3.
Press the OK button to
4.
Press the Δ / Ε button to select YNR.
5.
Press the Φ / Γ button to select On.
6.
Press the MENU button twice to return to normal TV
display
display
the Main
the Function
menu.
menu
icon
F
.
menu.
viewing.
timer
Sleep
SLEEP
or
menu.
Press the MENU button twice to return to normal TV
YNR
MENU
the Main
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
preset time elapses.
Press the SLEEP button to select the number of minutes. The
display
---
will appear
on
the screen, followed
by 120, 90, 60, 50,
40, 30, 20 and 10.
The timer
begins
to count down from the number of minutes
selected.
Note
a.
b.
c.
:
To view the
remaining sleep time, press the SLEEP button once.
sleep time, repeatedly press the SLEEP button
until the display Sleep--- appears.
When you switch the set off, the set releases the preset sleep
To cancel the
time.
18
Other functions
Picture format selection
You
can
watch the TV in various
picture
Press the ARC button to switch to
or
Zoom 2
formats.
4:3, Spectacle, 16:9, Zoom 1
format.
picture
4:3 Normal
This is the normal
picture
size 4
by
3
as
displayed
on
all TV sets.
Spectacle
The centre of the
3 mode but the
edges
filled to 16
are
picture is displayed as in 4 by
magnified so that the whole screen is
by
9
size.
16:9
ARC
(Wide screen)
screen pictures
Cinema
are
viewed like this. Some TV stations
broadcast programmes (mainly
cinema picture, select this mode.
films)
in the mode. To
enjoy
the
screen
but
Zoom 1
The normal 4
the extreme
by
3
picture
is
magnified
to fill the whole
top and bottom of the picture
are
lost.
Zoom 2
Similar to Zoom 1
but the
subtitles at the bottom of the
picture
picture
is shifted
can
be
upwards
so
that
viewed, therefore the
top of the picture is lost.
19
Time
setting
Clock
Clock+set
The clock uses the 24 hour system, and must be set to the correct
time before operating the set.
On++time+set
Off+time+set
Auto++sleep
++
R
1.
GBF
2.
¡(),OK+++Exit:MENUTM
3.
4.
5.
6.
POWER
7.
Press the MENU button to display the Main menu.
Press the Φ / Γ button to select the Clock menu icon
Press the OK button to display the Clock menu.
Press the Δ / Ε button to select Clock set.
Press the OK button to display the Clock set mode.
Select and adjust hour and minute by pressing the Φ / Γ and
Δ / Ε buttons.
Press the OK button to start.
.
On/off time
By using this function, the set automatically switches on at the
preset time and station. You must set the clock correctly before
MENU
1.
2.
3.
PR
4.
VOL
OK
on/off time functions.
using
VOL
5.
1 to 3 above.
Press the Δ / Ε button to select On time set or Off time set.
Press the OK button to display the sub menu.
Select and adjust hour, minute, Run/Hold, and programme
number by pressing the Φ / Γ and Δ / Ε buttons.
Press the OK button to start.
Repeat steps
PR
For OFF TIME SET, repeat above steps. Please note the absence
of programme number in this mode.
Note :
In the event of power interruption (disconnection or power
failure), the clock must be reset.
b. Run/Hold option is used to activate or deactivate preset on /
off times.
c.
If the same time is set for the on time and the off time, only the
off time operates.
d. This set must be put into standby mode with the POWER button
on the remote control to operate the on time function.
e.
If the on time function activates, the TV will automatically switch
to the on time programme number, even during viewing.
f. Two hours after the set is turned on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
g. Once the on or off time is set, these functions operate daily at
the preset time.
a.
Auto
sleep
If you select Auto
to standby mode
sleep On the set will automatically switch itself
approximately ten minutes after a TV station
stops broadcasting.
'Clock' steps 1 to 3 above.
the Δ / Ε button to select Auto sleep.
the OK button to display the sub menu.
the Φ / Γ button to select On or Off.
the OK button to store.
1.
Repeat
2.
Press
Press
Press
Press
3.
4.
5.
Press the MENU button twice to return to normal TV
20
viewing.
PIP
PIP
the
in
(Picture
same
Picture) displays
time you
can
a
operation (option)
picture
within
a
picture. Thus,
at
watch two different programmes.
On and off
Press the PIP button to switch
Press this button
Input
again
on a
sub
picture.
to switch it off.
mode selection for sub
picture
Press the INPUT button while the sub
main
picture
remains within the
picture.
Each time this button is
picture
is
displayed
as
pressed,
each
shown below
input
mode for the sub
the main
on
screen
beneath
the programme number.
PIP:
PIP:
(station number)
PIP: S-AV
Swapping
PIP:
picture
exchange
picture
PR-
PR+
SIZE
STILL
SWAP INPUT
picture.
freeze
Press this button
again
picture.
to restore motion.
POSITION
picture position change
Press the POSITION button
achieved. The sub
Sub
AV2
PIP
the main and sub
Press the STILL button to freeze the sub
Sub
PIP:
AV3
between main and sub
Press the SWAP button to
Sub
AV1
picture
picture
repeatedly
moves
until desired
position
is
clockwise.
size
press the SIZE button to select the desired sub picture
size. The sub picture appears as 1/4 size of the main picture,
followed by 1/9, 1/16 and then the wide screen format of the 1/16
Repeatedly
picture.
Programme
selection for sub
picture
Press the PR +/- buttons. The selected programme number is
displayed beneath the main picture programme number.
Note
:
PIP
operations
tuner models cannot
programmes
as can
differ between
one or
two tuner TVs. One
simultaneously display
two
separate TV
two tuner models.
21
PIP
operation (option)
PIP search
This function enables you to search all the stored stations on 9 or 4
sub pictures and see your favorite station by exchanging the main
and sub
pictures.
Press the 9/4 PIP button. 9 sub
pictures
appear and search all the
stored stations.
Press this button
again.
At this time 4 sub
Press the 9/4 PIP button
once more.
pictures
The 9
or
search them.
4 sub
pictures
switch
off.
If you press the SWAP button while the desired station is being
are exchanged so the station
searched, the main and sub picture
being
searched appears
on
the main
picture.
Strobe
This function
by
frame
on
9
sequentially displays
or 4 sub pictures.
the current main
picture
Press the STROBE button. A freeze frame of current main
picture
sequentially displayed on 9 sub pictures.
Press this button again. At this time 4 sub pictures display a freeze
frame one by one.
Press this button once more. The 9 or 4 sub pictures switch off.
is
SWAP
9/4PIP
STROBE
22
frame
Teletext
Teletext is
system
an
optional function,
therefore
only
(option)
set with the teletext
receive the teletext broadcast.
can
Teletext is
a free service broadcast by most TV stations which
gives up-to-the-minute information on news, weather, television
programmes, share prices and many other topics.
The teletext decoder of this TV
can
support the LIST, TOP and
FASTEXT modes. LIST
(standard teletext) consists of a number of
selected by directly entering the corresponding
pages which are
page number. TOP and FASTEXT
allowing quick
are
more
modern methods
and easy selection of teletext information.
123
TV/AV
456
Switch on/off
789
Press the TEXT button to switch to teletext. The initial page
selected page appears on the screen.
or
last
0
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your
selection, while the second shows the current page displayed.
Press the TEXT
or
PR
TEXT
PR
TV/AV button to switch off teletext.
LIST mode
If the TV is in TOP
or
FASTEXT
mode, press the
button to
switch to LIST mode.
T
X
T
Page selection
1.
M
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong
number, you must complete the three digit number and then reenter the correct page number. If the page is not available, the
page number, e.g. "> 300 <" will flash for a few seconds.
2.
The Δ
/ Ε button
following
can
be used to select the
preceding
or
page.
23
Teletext
Programming
(option)
a
colour button
Four teletext page numbers of your choice can be colour coded
and easily selected by pressing the corresponding coloured button
on
the remote control handset.
1.
Using
the NUMBER
buttons, select the page you wish
to
programme.
2. Wait until the page is displayed on the screen and press the OK
button. The page numbers in the colour boxes along the bottom
of the
3.
123
4.
0
PR
TOP mode
The
user
(option)
guide displays
the bottom of the
OK
PR
to ">000?".
coloured button to store the page number. From now
on, you can select this page with the same coloured button.
The three other coloured buttons are programmed in the same
a
way.
456
789
change
screen
Press
four
fields-red, green, yellow and blue
The
at
field denotes the next group
and the blue field indicates the next block.
screen.
yellow
Block/group/page selection
1.
2.
With the BLUE button you can progress from block to block.
Use the YELLOW button to proceed to the next group with
automatic overflow to the next block.
3.
With the GREEN button you can proceed to the next existing
page with automatic overflow to the next group. Alternatively the
4.
The RED button
Δ button
T
be used.
can
Alternatively the
XT
permits
Ε button
to return to
can
previous
selection.
be used.
Direct page selection
Corresponding to the LIST teletext mode, you can select a page by
entering a three digit number with the NUMBER buttons in TOP
mode. If the page is not available, the page
a few seconds.
number, e.g.
">300<"
flashes for
FASTEXT mode
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
Page selection
E
1.
Press the
button to select the index page.
select the pages which are colour coded
bottom line with the same coloured buttons.
2.
You
3.
Corresponding to the LIST teletext mode,
by entering three digit page number with
4.
The Δ
can
along
the
you can select a page
the NUMBER buttons
in FASTEXT mode.
/ Ε button
following
24
page.
can
be used to select the
preceding
or
Teletext
Special
G
teletext functions
REVEAL
Press this button to
such
as
to
again
information,
puzzles.
remove
the information from
EXPAND
(SIZE)
height text.
this button to enlarge the top half of the page.
this button again to enlarge the bottom half of
Selects double
Press
Press
again
to return to the normal
the
display.
UPDATE
Displays
the TV
the
new
the
top
teletext page. The display
left hand corner of the
picture
on
the
to the page number.
Press this button to view the
HOLD
screen
is available then
updated page
7
the concealed
or
display.
page.
Press this button
D
display
solutions of riddles
Press this button
the
6
(option)
while
waiting
for
will appear at
screen. When the
will
display
updated
change
teletext page.
(STOP)
the automatic page change which will occur if a
teletext page consists of 2 or more sub pages. The
Stops
number of sub pages and the sub page displayed is,
usually, shown on the screen below the time. When this
button is
pressed
top left hand
the
corner
stop symbol is displayed
of the
page change is inhibited.
To continue press this button
F
T
X
T
and the automatic
again.
MIX
Displays
picture.
the teletext pages
To switch the TV
H
screen
at the
picture
superimposed
on
off press this button
the TV
again.
TIME
When
viewing a
display the time
screen.
TV programme, press this button to
at the top right hand corner of the
Press this button
again
to
remove
the
display.
In teletext mode press this button to select a sub page
number. The sub page number is displayed at the
bottom of the
screen. To hold or change the sub page,
press the RED/GREEN, Δ / Ε or NUMBER button.
Press this button again to exit this function.
25
Connection of external
You
can
equipment
connect additional
such
equipment,
as
VCRs, camcorders
etc. to your set. Here shown may be somewhat different from the
back of your set.
Aerial socket
1.
(R)AUDIO(L)
Connect the RF out socket of the VCR to the aerial socket
on
the back of the set.
VIDEO
OUTPUT
2.
INPUT2
75Ω
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
4. Select the programme number where the VCR station is stored.
3.
INPUT1
(MONO)
VCR
5.
Press the PLAY button
on
the VCR.
Audio/Video in/out sockets
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets of
(R)AUDIO(L)
the set.
VIDEO
OUTPUT
2.
INPUT2
75Ω
INPUT1
(MONO)
If the VCR is connected to the INPUT1 sockets, press the
TV/AV button to select AV1. You should select AV2 if INPUT2
sockets
on
VCR
3.
on
panel
are
the front
Press the PLAY button
The VCR
S-VIDEO
the back
INPUT3 sockets
on
playback picture
connected to the VCR
panel
are
or
AV3 if
used.
the VCR.
appears
on
the
screen.
AUDIO
VIDEO
L(MONO)
R
ARC
You
MENU
also record programmes received
out sockets.
can
INPUT 3
by
the TV
on
video
tape via audio/video
VCR
S-video/Audio in sockets
When
connecting a
picture quality will be
S-VIDEO
1.
AUDIO
VIDEO
L(MONO)
R
ARC
MENU
2.
S-VIDEO VCR
4.
socket, the
improved.
on
the front
panel
of the set.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets
3.
further
Connect the video out socket of the S-VIDEO VCR to the SVIDEO socket
INPUT 3
(S-AV)
S-VIDEO VCR to the S-VIDEO
on
the front
Select S-AV
panel of the set.
by pressing the TV/AV button repeatedly.
Press the PLAY button
The VCR
on
playback picture
the VCR.
appears
on
the
screen.
: If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L(MONO) socket of the set.
Note
26
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
these
adjust
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
27
Download PDF