LG | BH100 | LG BH100 Owner’s Manual

Super Multi Blue
Player
Owner’s Manual
MODEL: BH100
HD DVD
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids,
such as vases, should be placed on the apparatus.
CAUTION concerning the Power Cord
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a confined
space such as a book case or similar unit.
CAUTION:
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to
protect it from over heating.
The openings should be never be blocked by placing the
product on a bed, sofa, rug or other similar surface.This
product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided
or the manufacturer's instruction have been adhered to.
CAUTION: CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN AND INTERLOCKS DEFEATED AVOID EXPOSURE TO THE BEAM.
CAUTION:
This product employs a Laser System.
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future reference.
Should the unit require maintenance, contact an authorized
service centre.
Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to
open the enclosure. Visible laser radiation when open. DO
NOT STARE INTO BEAM.
2
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits.
Check the specification page of this owner's manual to be
certain.
Do not overload wall outlets. Overloaded wall outlets, loose
or damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock
or fire. Periodically examine the cord of your appliance,
and if its appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and have the
cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains
cord plug. When installing the product, ensure that the plug
is easily accessible.
The appliance is not intended for use by young
children or infirm persons without supervision.
Young Children should be supervised to ensure
that they do not play with appliance.
If the appliance is supplied from a cord
extension set or an electrical portable outlet
device, the cord extension set on electrical
portable outlet device must be positioned so
that it is not subject to splashing or ingress of
moisture.
Contents
Introduction
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-10
About the
Symbol Display . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Moisture Condensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Regional Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Notes on Copyrights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
BD-ROM Disc Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
HD DVD Disc Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Compatibility Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Certain System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Important Notice for TV colour system . . . . . . . . . . . . . . . . . . . . .7
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Display Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Installation and Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-19
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
HDMI connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Connections to Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Connecting to an Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Resolution Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
- General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
- Display Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
- Language Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
- Audio Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17-18
- Lock Menu (Parental Control) . . . . . . . . . . . . . . . . . . . . . . .19
- Others Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-22
General playback features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
If a disc menu screen is displayed . . . . . . . . . . . . . . . . . . . . . . .21
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Marker Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Using Colour Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Displaying Disc Information On-Screen . . . . . . . . . . . . . . . . . . .21
Special Features for HD DVD . . . . . . . . . . . . . . . . . . . . . . . . . .22
- HD DVD Twin Format Discs . . . . . . . . . . . . . . . . . . . . . . . .22
- Using the HD DVD with HDi features . . . . . . . . . . . . . . . . .22
- Multi Title List function . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Special Features for BD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . .22
- BD Hybrid Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23-30
Controlling an LG TV with the Supplied Universal Remote Control . .23
Controlling other TVs with the Universal Remote Control . . . . . .23
Code numbers of controllable TVs . . . . . . . . . . . . . . . . . . . .24-25
Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Maintenance and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Super Multi Blue Player’s Audio Output Specifications . . . . . . . .29
Open source software notice . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
3
Introduction
Notes on Discs
To ensure proper use of this product, please read
this owner’s manual carefully and retain for future
reference.
Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
This manual provides information on the operation
and maintenance of your player. Should the unit
require service, contact an authorized service location.
About the
Symbol Display
“
” may appear on your TV display during operation and indicates that the function explained in this
owner’s manual is not available on that specific
media.
Symbols Used in this Manual
Note:
Indicates special notes and operating features.
Tip:
Indicates tips and hints for making the task easier.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the centre out.
A section whose title has one of the following symbols are applicable only to the disc represented by
the symbol.
BD BD-ROM disc
HD DVD HD DVD-ROM disc
DVD DVD-Video disc
4
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.
Do not use strong solvents such as alcohol,
benzene, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
DTS and DTS Digital Surround are registered
trademarks of Digital Theater Systems, Inc.
Moisture Condensation
Never operate this product immediately after moving
it from a cold location to a warm location. Leave it
for two or three hours without operating it. If you use
this product in such a situation, it may damage discs
and internal parts.
BD-ROM
Discs such as movies that can be purchased or rented
HD DVD Disc
This product fully supports standard Blu-ray discs
and can play high definition audio/visual content
from HD DVD discs. This product does not support
interactive “HDi” features available from many HD
DVD discs.
DVD-VIDEO (8 cm / 12 cm disc)
Discs such as movies that can be purchased or rented
Regional Code
Both the player and the discs are coded by region.
These regional codes must match in order to play
the disc. If the codes do not match, the disc will not
play. The Region Number for this player is described
on the rear panel of the player.
DVD-Video
DVD-RW (8 cm / 12 cm disc)
Video mode and finalized only
DVD+R
Video mode only
Supports the dual layer disc also
DVD+RW
Video mode only
Notes:
Depending on the conditions of the recording
equipment or the DVD±R/RW disc itself, some
DVD±R/RW discs cannot be played on the unit.
Do not attach any seal or label to either side (the
labelled side or the recorded side) of a disc.
Do not use irregularly shaped discs (e.g., heart
shaped or octagonal). Doing so may result in
malfunctions.
Depending on the recording software & the finalization, some recorded DVD±R/RW may not be
playable.
DVD±R/RW discs recorded using a personal
computer or a DVD Recorder may not play if the
disc is damaged or dirty, or if there is dirt or condensation on the Player’s lens.
If you record a disc using a personal computer,
even if it is recorded in a compatible format, there
are cases in which it may not play because of the
settings of the application software used to create
the disc. (Check with the software publisher for
more detailed information.)
BD-ROM
Notes on Copyrights
DVD-R (8 cm / 12 cm disc)
Video mode and finalized only
Introduction
Playable Discs
Because AACS (Advanced Access Content
System) is approved as content protection system for BD and HD DVD format, similar to use of
CSS (Content Scramble System) for DVD format,
certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your
time of purchase as those restrictions may be
adopted and/or changed by AACS after the production of this product.
Furthermore, BD-ROM Mark and BD+ are additionally used as content protection system for BD
format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or
BD+ protected contents. To obtain additional
information on AACS, BD-ROM Mark, BD+, or
this product, please contact LG Customer Service
Centre.
Many HD DVD/BD-ROM/DVD discs are encoded
with copy protection. Because of this, you should
only connect your player directly to your TV, not
to a VCR. Connecting to a VCR results in a distorted picture from copy-protected discs.
This product incorporates copyright protection
technologies that are protected by certain U.S.
patents and other intellectual property rights
owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation and is intended for home and other
limited viewing uses only, unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, HD DVDs, BD-ROM discs,
DVDs, CDs and other materials may subject you
to civil and/or criminal liability.
5
BD-ROM Disc Features
BD-ROM Discs can store 25 GB (single layer) or
50 GB (dual layer) on a single sided disc - about
5 to 10 times the capacity of a DVD.
BD-ROM Discs also support the highest quality HD
video available in the industry (up to 1920 x 1080) Large capacity means no compromise on video
quality. Furthermore, a BD-ROM disc has the same
familiar size and look as DVD.
•
The following BD-ROM disc features are disc
dependent and will vary.
•
Appearance and navigation of features will also
vary from disc to disc.
•
Not all discs will have the features described
below.
•
BD-ROM, Hybrid disc have both BD-ROM and
DVD layers on one side. Because this type of disc
is a technology currently in development, such
discs may not operate properly in this player.
Video highlights
The BD-ROM format for movie distribution supports
three highly advanced video codecs, including
MPEG-2, MPEG4 AVC (H.264), and SMPTE VC1.
HD video resolutions are also available:
• 1920 x 1080 HD
• 1280 x 720 HD
For High-Definition Playback
To view high-definition contents from BD-ROM discs,
an HDTV is required. Some discs may require HDMI
OUT for viewing of high-definition contents. Ability to
view high-definition contents in BD-ROM discs may
be limited depending on the resolution of your TV.
Graphic planes
Two individual, full HD resolution (1920x1080)
graphic planes (layers) are available, on top of the
HD video layer. One plane is assigned to video
related, frame accurate graphics (like subtitles), and
the other plane is assigned to interactive graphic
elements, such as buttons or menus.
For both planes, various wipes, fades and scroll
effects may be available.
Graphic
Plane
HD Video
6
Menu graphics
Support 256 colour full resolution graphics and animation, thereby greatly surpassing the capabilities of
DVD-Video. Options can be accessed and removed
during video playback.
Menu sounds
When you highlight or select a menu option, sounds
can be heard such as button clicks or a voice-over
explaining the highlighted menu choice.
Multi-page/Pop Up Menus
With DVD-Video, playback is interrupted each time a
new menu screen is accessed. Due to BD-ROM
disc’s ability to preload data from the disc without
interrupting playback, a menu can consist of several
pages.
You can browse through the menu pages or select
different menu paths, while the audio and video
remain playing in the background.
Interactivity
Certain BD-ROM Discs may contain animated
menus and/or trivia games.
User Browsable Slideshows
With BD-ROM Discs, you can browse through various still pictures while the audio remains playing.
Subtitles
Depending on what is contained on the BD-ROM
disc, you may be able to select different font styles,
sizes and colours for some subtitles, Subtitles may
also be animated, scrolled or faded in and out.
BD-Java Interactive Capability
This player supports JAVA contents in the BD-ROM
disc.
BD-ROM Disc Compatibility
BD-ROM disc is a new and evolving format.
Accordingly, disc compatibility issues with new and
existing format discs are possible. Not all discs are
compatible and not every disc will playback. For
additional information, also refer to the Compliance
and Compatibility Notice section of this Manual.
If you encounter compatibility problems, please contact LG Customer Service Centre.
This player supports only BD-ROM Profile 1 version
1.0 specification.
HD DVD video discs are high-density, high-capacity
discs.
There are 2 types of HD DVD disc; one is standard content disc and the other is advanced content disc. Standard content disc is pure extension
of DVD Video. Advanced content disc realizes
more interactivity in addition to the extension of
audio and video realized by standard disc.
The HD DVD disc standard has been approved
by the DVD forum.
HD DVD (single layer): Maximum capacity of 15 GB
HD DVD (dual layer): Maximum capacity of 30 GB
A single layer single sided disc (15 GB) has
capacity of about maximum 8 hours in 1125 line
high definition picture; about maximum 48 hours
in 525 line standard definition picture (depending
on bitrate of pre-recorded contents).
HD DVD Twin Format Discs have both HD DVD
and DVD layers on one side. HD DVD
Combination DVD Discs have HD DVD material
on one side and standard DVD material on the
other side. Because this type of disc is a technology currently in development, such discs may not
operate properly in this player.
Some titles may played back with black “letterbox
bars” because the title is recorded with bars by
the content provider.
This product fully supports standard Blu-ray discs
and can play high definition audio/visual content
from HD DVD discs. This product does not support interactive “HDi” features available from
many HD DVD discs.
Compatibility Notes
Because BD-ROM and HD DVD are a new format, certain disc, digital connection and other
compatibility issues are possible. If you experience compatibility problems, please contact LG
Customer Service Centre.
Viewing high-definition content and up-converting
standard DVD content may require an HDMI
capable input or HDCP capable DVI input on your
display device.
Some BD-ROM, HD DVD and DVD discs may
restrict the use of some operation commands or
features.
Dolby Digital Plus and DTS-HD (DTS only) capability is limited to 6 channels (5.1).
Certain System Requirements
For high definition video playback:
High definition display that has COMPONENT or
HDMI input jacks.
BD-ROM or HD DVD disc with high definition
content.
HDMI or HDCP capable DVI input on your display
device is required for some content (as specified
by disc authors).
For up-conversion of standard definition DVD, an
HDMI or HDCP capable DVI input on your display
device is required for copy protected content.
Introduction
HD DVD Disc Features
For Dolby® Digital Plus and DTS-HD multi-channel
audio playback:
A/V Receiver or processor/amp combination with
5.1 channel analog input.
Main, centre, surround speakers and subwoofer
as necessary for chosen format.
Important Notice for TV colour
system
The colour system of this player differs according to
currently playing discs.
For example, when the player plays back the disc
recorded in the NTSC colour system, the image is
outputted as a NTSC signal.
Only the multi system colour TV can receive all
signals outputted from the player.
Notes:
If you have a PAL colour system TV, you will see
just distorted images when using discs recorded in
NTSC.
The multi system colour TV changes the colour
system automatically according to input signals. In
case that the colour system is not changed
automatically, turn it off and then on to see normal
images on screen.
If you try to record a NTSC output signal from the
player with your recorder, the recorder may not
record the signal correctly.
7
Front Panel
a
a POWER Button
Switches the unit ON or OFF.
b Disc Tray
Insert a disc here.
c Remote Sensor
Point the Remote Control here.
d Z (OPEN/CLOSE)
Opens or closes the disc tray.
e N / X (PLAY / PAUSE)
Starts playback.
Pause playback temporarily, press again to exit
pause mode.
f x (STOP)
Stops playback.
g s (RESOLUTION)
Sets the output resolution for HDMI and
COMPONENT VIDEO OUT jacks.
h Display Window
Shows the current status of the player.
8
b
c
d
e
f
g
h
Tip:
Z, N / X, x, and s buttons are operated with a
slight/brief touch.
Precautions in using the touch buttons
Use the touch buttons with clean and dry hands.
Do not press the touch buttons with too much
force.
Do not touch the button with any conductive
material such as metallic object (Disc, etc). It may
cause a malfunction.
Lock (Child Lock)
The N / X, x, and s buttons on the front of the
player can be locked so that your player can only be
operated using the Remote Control.
1. Press LOCK on the Remote Control. “LOCK ON”
will appear in the display window.
If N / X, x or s button on the front of your
unit are pressed, “CHILD LOCK” will flicker in the
display window for a few seconds.
2. Press LOCK again to switch off the child lock.
“LOCK OFF” will appear in the display window.
a
b c d
HDMI
YPbPr 1080
720
576
BD HD DVD
IP
e
TITLE
k
f
g
h
i j
CHAP RPT
A-B
AGL
l
a HDMI Indicator
Indicates when the HDMI output is available.
g Repeat Mode Indicator
Indicates when playing in repeat mode.
b YPbPr Indicator
Indicates when the component video output is
available.
h A-B Repeat Mode Indicator
Indicates when playing in A-B repeat mode.
c Status Indicator
N: Playing
X: Paused
d Video Output Resolution Indicator
Displays the video output resolution currently
selected.
576i: 576 interlaced
576p: 576 progressive
720p: 720 progressive
1080i: 1080 interlaced
1080p: 1080 progressive
e TITLE
Indicates current title number.
Introduction
Display Window
i AGL (Angle) Indicator
Indicates when playing a scene recorded with
multi angles.
j Remote Control Indicator
Indicates when Remote Control signal is
received.
k Disc Indicator
BD: Indicates when an BD-ROM disc is loaded.
HD DVD: Indicates when an HD DVD disc is
loaded.
DVD: Illuminates when a DVD disc is loaded.
l Character Indicators
Indicates total playing time, elapsed time, title
number, chapter number or message, etc.
f CHAP (Chapter) Indicator
Indicates current chapter number.
9
Remote Control
a
b
c
d
a POWER: Switches the player ON
or OFF.
TV POWER: Switches the TV ON
or OFF.
OPEN/CLOSE (Z): Opens and
closes the disc tray.
MARKER: Marks any point during playback.
SEARCH: Displays Marker
Search menu.
AUDIO ( ): Selects an audio
language or audio channel.
LOCK: Press to lock the
N / X, x, and s buttons on
the front panel. Press again to
release.
SUBTITLE ( ): Selects a
subtitle language.
REPEAT: Repeat chapter, title.
A-B: Repeat sequence.
ANGLE ( ): Selects a disc
camera angle, if available.
b Colour Buttons: Use these
buttons as indicated by the video
display during BD-ROM disc
playback
DISPLAY: Accesses On-Screen
Display.
DISC MENU: Accesses menu on
a disc.
TITLE: Displays the disc’s title
menu, if available.
b/B/v/V
(left/right/up/down): Selects an
option in the menu.
ENTER ( ): Acknowledges
menu selection.
RETURN (O): Exits the menu.
CLEAR: Removes a mark on the
Marker Search menu or a number
when setting the password.
POP UP: Displays the disc’s
popup menu, if available.
(BD-ROM only)
SETUP: Accesses or exits the
Setup menu.
c x (STOP): Stops playback.
N (PLAY): Starts playback.
X (PAUSE/STEP): Pauses
playback.
m / M (SCAN): Search
backward or forward.
. / > (SKIP): Go to next or
previous chapter.
d TV Control Buttons: See page
23.
0-9 numerical buttons: Selects
numbered options in a menu.
RESOLUTION: Sets the output
resolution for HDMI and
COMPONENT VIDEO OUT
jacks.
buttons are not available.
Remote Control Operation
Point the Remote Control at the remote sensor and
press the buttons.
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
10
Remote Control Battery Installation
Remove the battery cover on
the rear of the Remote Control,
and insert two R03 (size AAA)
batteries with
and
matched correctly.
Installation and Setup
Rear Panel
a
b c
d
e
HDMI OUT
(1080p)
SERVICE
f
COMPONENT
VIDEO OUT
FRONT
R
Y
5.1CH
AUDIO
OUT
VIDEO
OUT
L
REAR
CENTER
PB
DIGITAL
AUDIO OUT
R
WOOFER
PR
COAXIAL
g
h
OPTICAL
i
j
a 2CH AUDIO OUT (Left/Right)
Connect to a TV with 2 channel audio inputs.
h COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
b VIDEO OUT
Connect to a TV with video inputs.
i OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
c COMPONENT VIDEO OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
j AC Power Cord
Plug into the power source.
Installation and Setup
L
2CH
AUDIO
OUT
d HDMI OUT (Type A)
Connect to TV with HDMI inputs. (Interface for
digital audio and video)
e SERVICE port
Reserved for authorized service purposes.
f Cooling fan
g 5.1CH ANALOG AUDIO OUT
Connect to a 5.1CH analog input on an A/V
Amplifier/Receiver.
11
HDMI connection
HDMI compatible TV
HDMI
If you have a HDMI TV or monitor, you can connect
it to this player using a HDMI cable.
1. Connect the HDMI jack on the player to the HDMI
jack on a HDMI compatible TV or monitor (H).
H
2. Set the TV’s source to HDMI (refer to TV’s
Owner’s manual).
COMPONENT
VIDEO OUT
L
Notes:
If your TV is NOT capable of handling 96 kHz
sampling frequency, set the [Sampling Freq.]
option to [48 kHz] on the setup menu (See page
17). When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz so
your system can decode them. (See page 17)
If [SPDIF] option is set to [Bitstream] on the setup
menu and your TV does not support Bitstream
Audio out in HDMI connection, audio sound may
be distorted or may not output. In this case, set
the [SPDIF] option to [PCM] in the setup menu.
(See page 17)
Dolby Digital Plus and DTS-HD capability limited
to 5.1 channels.
Dolby TrueHD processing for two channels only.
If a title or disc is recorded in a resolution lower
than 1080p, the output resolution is automatically
changed to no higher than 1080i (even if 1080p is
selected in the menu).
The arrow on the cable connector body should
face up for correct alignment with the connector
on the player.
FRONT
R
2CH
AUDIO
OUT
5.1CH
AUDIO
OUT
Y
VIDEO
OUT
L
REAR
CENTER
PB
DIGITAL
AUDIO OUT
R
WOOFER
HDMI OUT
(1080p)
SERVICE
PR
COAXIAL
OPTICAL
Rear of the player
About HDMI
HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD Players, Set-Top Boxes,
and other AV devices.
HDMI was developed to provide the technologies of
HDCP (High-Bandwidth Digital Contents Protection).
HDCP is used to protect digital content transmitted
and received.
HDMI has the capability to support standard,
enhanced, or high-definition video plus standard to
multi-channel surround-sound audio, HDMI features
include uncompressed digital video, a bandwidth of
up to 5 gigabytes per second, one connector
(instead of several cables and connectors), and
communication between the AV source and AV
devices such as DTVs.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI licensing LLC.
Additional Information for HDMI
When you connect a HDMI or DVI compatible
device make sure of the followings:
- Try switching off the HDMI/DVI device and this
player. Next, switch on the HDMI/DVI device
and leave it for around 30 seconds, then switch
on this player.
- The connected device’s video input is set correctly for this unit.
- The connected device is compatible with
720x576p, 1280x720p, 1920x1080i or
1920x1080p video input.
1920x1080p is available only on BD-ROM /
HD DVD recorded in 1080p.
Not all HDCP-compatible DVI devices will work
with this player.
- The picture will not be displayed properly with
non-HDCP device.
- This player does not playback and a message
appears on TV screen.
(Type A)
Tip:
When you use HDMI connection, you can change
the resolution for the HDMI output. (Refer to
“Resolution Setting” on page 15.)
Cautions
Changing the resolution when the connection has
already been established may result in malfunctions. To solve the problem, turn off the player and
then turn it on again.
When the HDMI connection with HDCP is not verified, a message appears on TV screen. In this
case, check the the HDMI connection, or disconnect the HDMI cable.
If there is noise or lines on the screen, please
check the HDMI cable (length is generally limited
to 15ft).
12
Make one of the following connections, depending on the capabilities of your existing equipment.
Rear of TV
Caution
– Make sure the player is connected directly to the
TV. Tune the TV to the correct video input channel.
– Do not connect the player’s AUDIO OUT jack to
the phono in jack (record deck) of your audio system.
– Do not connect your player via your VCR. The
DVD image could be distorted by the copy protection system.
Component Video Connection
Connect the COMPONENT VIDEO OUT jacks on
the player to the corresponding input jacks on the
TV using Y Pb Pr cables (C).
COMPONENT VIDEO INPUT
Y
R
L
Tips
Depending on your TV and other equipment you
wish to connect, there are various ways you
could connect the player. Use only one of the
connections described below.
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
VIDEO
INPUT
AUDIO INPUT
A
V
Pb
Pr
C
COMPONENT
VIDEO OUT
L
FRONT
R
2CH
AUDIO
OUT
Y
VIDEO
OUT
PB
5.1CH
AUDIO
OUT
L
REAR
CENTER
DIGITAL
AUDIO OUT
R
WOOFER
PR
COAXIAL
Rear of the player
OPTICAL
HDMI OUT
(1080p)
SERVICE
Installation and Setup
Connections to Your TV
Tip:
When you use COMPONENT VIDEO OUT connection, you can change the resolution for the output.
(Refer to “Resolution setting” on page 15.)
Video Connection
Connect the VIDEO OUT jack on the player to the
video in jack on the TV using a video cable (V).
Audio (Left/Right) Connection
Connect the left and right AUDIO OUT jacks of the
player to the audio left and right IN jacks on the TV
using the audio cables (A). Do not connect the player’s AUDIO OUT jack to the phono in jack (record
deck) of your audio system.
Note:
For this audio connection, set the [Speaker Out]
option to [2CH] on the setup menu. (See page 17.)
13
Connecting to an Amplifier
Connecting to an amplifier equipped with
two channel analog stereo or Dolby Pro
Logic ll/ Pro Logic
Connect the Left and Right AUDIO OUT jacks on
the player to the audio left and right in jacks on your
amplifier, receiver, or stereo system, using audio
cables (A).
Rear of the player
COMPONENT
VIDEO OUT
L
FRONT
R
2CH
AUDIO
OUT
Y
VIDEO
OUT
PB
5.1CH
AUDIO
OUT
L
REAR
CENTER
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2, or DTS)
DIGITAL
AUDIO OUT
HDMI OUT
(1080p)
R
SERVICE
PR
WOOFER
A
OPTICAL
COAXIAL
X
O
1. Connect one of the player’s DIGITAL AUDIO
OUT jacks (OPTICAL O or COAXIAL X) to the
corresponding in jack on your amplifier. Use an
optional digital (optical O or coaxial X) audio
cable.
2. You will need to activate the player’s digital output. (See “Audio Menu” on pages 17.)
Notes:
Dolby Digital Plus and DTS-HD capability limited
to 5.1 channels.
Dolby TrueHD processing for two channels only.
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video Receiver that supports one or more of
the audio formats supported by your player
(MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver.
Cautions:
Due to the DTS Licensing agreement, the digital
output will be in DTS digital out when DTS audio
stream is selected.
Digital multi channel of the Dolby Digital, Dolby
Digital Plus and True HD is output with Dolby
Digital.
Notes:
– If the audio format of the digital output does not
match the capabilities of your receiver, the receiver
will produce a strong, distorted sound or no sound at
all.
– Six Channel Digital Surround Sound via digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
– To see the audio format of the current disc in the
on-screen display, press AUDIO.
14
R
L
AUDIO INPUT
COAXIAL
OPTICAL
DIGITAL INPUT
DIGITAL INPUT
Amplifier (Receiver)
Analog connection to a multi-channel A/V receiver with 6 Channel connectors (Dolby Digital,
DTS): This player contains a multi-channel decoder.
This enables playback of discs recorded in Multichannel Surround without the need for an optional
decoder.
For this audio connection, set the [Speaker Out]
option to [5.1CH] and make the appropriate [5.1
Speaker Setting] option on the setup menu. (See
page 18.)
Rear of
the player
L
FRONT
F
R
2CH
AUDIO
OUT
5.1CH
AUDIO
OUT
L
REAR
R
R
CENTER
C
WOOFER
Amplifier
(Receiver)
Front R
Front L
Rear R
Rear L
Center
Subwoofer
ANALOG 5.1CH
AUDIO INPUT
The player provides several output resolutions for
HDMI and COMPONENT VIDEO OUT jacks.
You can change the resolution using SETUP menu
or pressing the RESOLUTION button in complete
stop mode.
1080p – Outputs 1080 lines of progressive
video. (only for HDMI connection and
BD-ROM/HD DVD discs recorded in 1080p)
1080i – Outputs 1080 lines of interlaced video.
720p – Outputs 720 lines of progressive video.
576p – Outputs 576 lines progressive video.
576i – Outputs 576 lines of interlaced video.
(Only resolution available on VIDEO OUT, not
available on HDMI connection)
Available resolution according to connection
HDMI connection
• BD-ROM / HD DVD playback: 1080p, 1080i, 720p
and 576p are all available.
• DVD playback: 1080i, 720p and 576p are
available.
• If the HDMI jack is connected for TVs providing
display information (EDID), you can not select resolutions that the TV does not accept.
• If a title or disc is recorded in a resolution lower
than 1080p, the output resolution is automatically
changed to no higher than 1080i (even if 1080p is
selected in the menu).
• 576i is not available.
COMPONENT VIDEO OUT connection
How to change the resolution using
RESOLUTION button
Press RESOLUTION button on the Remote Control
or front panel in complete stop mode.
Front Panel
Remote Control
• BD-ROM / HD DVD / DVD playback: 1080i, 720p,
576p and 576i are available.
• The resolution may be limited depending on the
title in BD-ROM and HD DVD.
• However, resolutions not supported by the TV are
unavailable.
• If the disc is copy protected, the resolution will be
changed to 576i automatically.
Installation and Setup
Resolution Setting
VIDEO OUT connection
RESOLUTION button
How to change the resolution using
Setup menu
1. Press SETUP in complete stop mode.
The Setup menu appears.
2. Use v / V to select [Display] option then press B
to move to the second level.
3. Use v / V to select the [Resolution] option then
press B to move to the third level.
• BD-ROM / HD DVD / DVD playback:
The resolution of the VIDEO OUT jack is fixed to
576i.
Notes:
• Only resolutions supported by the TV are available.
• Depending on your TV, certain HDMI output resolutions may not work.
• If your TV does not accept your resolution setting,
an abnormal picture appears on the screen.
Please read TV’s owner’s manual then set the
resolution that your TV can accept.
Note for 1080p resolution
4. Use v / V to select the desired resolution then
press ENTER to confirm your selection.
The LG Super Multi Blue player is able to provide a
1080p full HD image to most 1080p-capable TVs in
the market today.
However, there are some 1080p TVs available from
certain companies that are limited in the types of
1080p images that can be accepted. Specifically,
1080p-capable TVs that only accept images in
50/60Hz can display an image from this player in
1080i resolution.
15
Initial Settings
Display Menu
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
You can also set a language for the subtitles and the
Setup menu, among other things. For details on
each Setup menu item, see pages 16 to 19.
To display and exit the Menu:
Press SETUP to display the menu in complete stop
mode. A second press of SETUP will take you back
to initial screen.
To go to the next level:
Press B on the Remote Control.
To go back to the previous level:
Press b on the Remote Control.
General Operation
1. Press SETUP in complete stop mode.
The Setup menu appears.
TV Aspect
4:3 – Select when a standard 4:3 TV is
connected. (4:3 can be affected only when the
resolution is 576i or 576p.)
16:9 – Select when a 16:9 wide TV is connected.
Display Mode
Display Mode setting is available only when the
TV Aspect mode is set to [4:3].
Letterbox – Displays a wide picture with bands
on the upper and lower portions of the screen.
Pan Scan – Automatically displays the wide
picture on the entire screen and cuts off the
portions that do not fit.
2. Use v / V to select the desired option then press
B to move to the second level. The screen
shows the current setting for the selected item,
as well as alternate setting(s).
Notes:
• Display Mode may not be supported on a HD
DVD title.
• The Pan Scan option does not operate during
BD-ROM playback.
Resolution
3. Use v / V to select the second desired option
then press B to move to the third level.
Sets the output resolution of the Component and
HDMI video signal.
4. Use v / V to select the desired setting then
press ENTER to confirm your selection. Some
items require additional steps.
The number in 576i, 576p, 720p, 1080p and 1080i
indicates the number of lines of video. The “i” and
“p” indicate interlaced and progressive scan,
respectively.
5. Press RETURN, SETUP, or PLAY to exit the
Setup menu.
1080p – Outputs 1080 lines of progressive
video. (only for HDMI connection and
BD-ROM/HD DVD discs recorded in 1080p)
1080i – Outputs 1080 lines of interlaced video.
720p – Outputs 720 lines of progressive video.
576p – Outputs 576 lines progressive video.
576i – Outputs 576 lines of interlaced video.
(COMPONENT and VIDEO OUT jack only)
Note:
Refer to “Resolution Setting” on page 15 for details
about the resolution.
16
Language Menu
Notes:
• With digital audio connection, Disc Menu button
sounds may not be heard if the [SPDIF] option is
set to [Bitstream]. (BD-ROM)
• In Bitstream mode, this player does not support
DTS-HD audio on some HD DVD and abnormal
audio will output from audio out jack. To listen to
the DTS-HD audio, you must set the [SPDIF]
option to [PCM].
• On Bitstream mode, MPEG audio on DVD will
output with PCM.
Display Menu Language
Disc Menu / Audio / Subtitle Language
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Original – Refers to the original language in
which the disc was recorded.
Other – To select another language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language
code list on page 26. If you make a mistake
while entering a number, press CLEAR repeatedly to delete numbers one by one then correct
it.
Off (for Disc Subtitle) – Turn off Subtitle.
Audio Menu
Each DVD disc has a variety of audio output
options. Set the player’s Audio options according to
the type of audio system you use.
Sampling Freq. (Frequency)
If your A/V Receiver or Amplifier is NOT capable of
handling 96 kHz signals, select 48 kHz. When this
choice is made, this unit automatically converts any
96 kHz signals to 48 kHz so your system can
decode them.
If your A/V Receiver or Amplifier is capable of
handling 96 kHz signals, select 96 kHz.
Check the documentation for your A/V Receiver or
Amplifier to verify its capabilities.
Speaker Out
To select various parameters for the analog 5.1
channel output.
Installation and Setup
Select a language for the Setup menu and onscreen display.
2CH – When a 2 channel stereo system is connected to this player.
5.1CH – When a 5.1 channel surround system is
connected to this player.
5.1 Speaker Setting
The 5.1 Speaker Setting option is only available
when the [Speaker Out] option is set to [5.1CH].
Select speaker settings, including speaker size, or
test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See [5.1 Speaker Settings] on the
next page.)
SPDIF (Digital Audio Output)
Bitstream – Select [Bitstream] if you connect
this unit’s DIGITAL OUT jack to an A/V Receiver
or other equipment with a Dolby Digital, DTS or
MPEG decoder.
PCM (for Dolby Digital / MPEG / DTS) – Select
when connected to a two-channel digital stereo
amplifier. DVDs encoded in Dolby Digital, DTS or
MPEG will be automatically downmixed to two
channel PCM audio.
17
5.1 Speaker Setting
Speaker selection
Make the following settings for the built-in 5.1 channel surround decoder.
Select a speaker that you want to adjust. (Front Left
Speaker, Centre Speaker, Front Right Speaker, Rear
Right Speaker, Rear Left Speaker, or Subwoofer.)
Size
Press b / B to set a mode. (Large, Small or None)
If you have connected the system to a speaker with
a low frequency of 100Hz or below, select [Large].
If you have connected the system to a speaker without a low frequency of 100Hz or below, select
[Small]. If you have not connected a subwoofer,
always select [Large] for Front speaker (L/R).
1. Press SETUP. The setup menu appears.
2. Use v / V to select the [Audio] option then press
B to move to the second level.
3. Use v / V to select the [5.1 Speaker Setting]
option then press B to move to the third level.
4. Use b / B to select the desired speaker.
5. Adjust options using v / V / b / B buttons.
6. Press v / V repeatedly to return to the previous
menu screen.
When you do not have a certain speaker connected,
select [None].
Front L/R speaker’s size can be set to [Large] or
[Small].
If Front L/R speaker’s size is set to [Small], Rear
and Centre speaker’s size can only be set to [Small]
or [None].
Subwoofer’s size can be set only to [Large] or
[None]. Select [None] to disable the subwoofer
speaker. (This option can only be selected when the
Front (L+R) speakers are set to Large.)
Test
Select [All] using b / B to test the signals of each
speaker.
Front Left (L) → Centre → Front Right (R)
→ Rear Right (R) → Rear Left (L) → Subwoofer
Adjust the volume during operation of the test tone
on the Amplifier or A/V Receiver, so that all speaker’s volumes are the same from the listener’s position.
Note:
If a speaker’s sound is not heard, change the
speaker’s size setting.
18
Lock Menu (Parental Control)
If you forget your password
If you forget your password, you can clear it using
the following steps:
1. Remove any disc that might be in the player, or
open the disc tray.
Rating
3. Press ENTER when the [Change] option is highlighted, then input the 6-digit number “210499”
and press ENTER. Pressing the b button to
highlight the [Set Password] option will complete
the password clearing process.
Blocks playback of rated DVDs based on their content. (Not all discs are rated.)
Area Code
1. Select [Rating] on the Lock menu then
press B.
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 26.
2. To access the [Lock] options, you must input the
password you have created. If you have not yet
entered password, you will be prompted to do so.
Input a password and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
3. Select a rating from 1 to 8 using the v / V buttons.
1. Select [Area Code] on the Lock menu then
press B.
2. Follow step 2 as shown left (Rating).
3. Select the first character using v / V buttons.
4. Press B and select the second character using
v / V buttons.
Rating 1-8: Rating one (1) has the most restrictions and rating eight (8) is the least restrictive.
5. Press ENTER to confirm your Area code selection.
Unlock: If you select unlock, parental control is
not active and the disc plays in full.
Others Menu
Installation and Setup
2. Press SETUP to display the Setup Menu and
select the Lock Menu.
4. Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
Set Password
You can enter or change the password.
1. Select [Set Password] option on the Lock menu
then press B.
2. To create new password, press ENTER when the
[New] option is highlighted. Input new password
and press ENTER. Enter it again and press
ENTER to verify.
To change the password, press ENTER when the
[Change] option is highlighted, then input old
password and press ENTER. Input new password
and press ENTER. Enter it again and press
ENTER to verify.
To delete the password, select [Delete] option
then press ENTER, then input old password and
press ENTER. The password is deleted.
3. Press SETUP to exit the menu.
Button Sound
You can hear beep sound when you press a button
on the front panel. Set [ON] for this effect.
Java Application Font Size
BD
You can adjust the default text size displayed for
the JAVA contents during BD-ROM playback.
This setting is only valid when the JAVA contents
do not set the size of text.
Please select a font size bigger than 24 when the
player is connected with an HD TV.
19
Operations
General playback features
1. Load your chosen disc in the tray, with the playback side down.
2. Playback starts.
Buttons
Operations
x (STOP)
Stops the playback. The unit records the stopped point, depending on the
disc. “Xx” appears on the screen briefly. Press PLAY (N) to resume playback (from the scene point). If you press STOP (x) again or unload the disc
(“x” appears on the screen.), the unit will clear the stopped point.
(Xx = Resume Stop, x = Complete Stop)
Note: The resume point may be cleared when a button is pressed (for
example; POWER, OPEN/CLOSE, etc).
OPEN / CLOSE (Z)
Opens or closes the disc tray.
X (PAUSE)
During playback, press X to pause playback.
Press X repeatedly to play Frame-by-Frame.
. / > (SKIP)
During playback, press SKIP (. or >) to go to the next chapter or to
return to the beginning of the current chapter.
Press SKIP . twice briefly to step back to the previous chapter.
m / M (SCAN)
During playback, press SCAN (m or M) repeatedly to select the required
scan speed. (5 steps)
While the playback is paused, press SCAN M repeatedly to play in slow
motion (4 steps, forward only).
REPEAT
During playback, press REPEAT repeatedly to select a desired repeat
mode. (Chapter/Title/Off)
A-B
During playback, each press of A-B button to select point A and point B and
repeats a sequence from point A (Starting point) to point B (End point).
To cancel the sequence, press A-B.
TITLE DVD
POP UP
HD DVD
If the current BD-ROM disc has a menu, the Popup menu appears on the
screen. Depending on the disc, the Popup Menu may not be available.
BD
DISC MENU DVD
HD DVD The menu appears on the screen. (For the HD DVD advanced content title
with HDi features, the menu that is supplied by this player is displayed.)
BD
ANGLE (
)
SUBTITLE (
AUDIO (
If the current DVD and HD DVD disc has a menu, the Title menu appears on
the screen. Depending on the disc, the Title Menu may not be available. In
this case, the disc menu may appears. (For the HD DVD advanced content
title with HDi features, the menu that is supplied by this player is displayed.)
The top menu appears on the TV screen.
During playback of the disc contains scenes recorded different camera
angles, press ANGLE repeatedly to select a desired angle.
)
)
During playback, press SUBTITLE repeatedly to select a desired subtitle
language.
During playback, press AUDIO repeatedly to hear a different audio language
or audio track.
Notes on general features:
20
•
•
If you press SKIP (>) once during Repeat Chapter playback, the repeat playback cancels.
When you are playing a disc containing scenes recorded different camera angles, the angle indicator will
appear on the TV screen for a while and display window during scenes recorded at different angles as an
indication that angle switching is possible.
•
The REPEAT or A-B button may not work on some discs.
If a disc menu screen is displayed
Using Colour Buttons BD
The menu screen may be displayed first after loading
a disc which contains a menu.
These buttons are available only during BD-ROM’s
JAVA content playback. Use appropriate colour button as indicated by the JAVA display during
BD-ROM disc playback. Depending on the disc contents, the functions of each button may differ.
Use the b / B / v / V buttons to select the title/chapter you want to view, then press ENTER to start
playback.
Time Search
To start playing at any chosen time on the disc:
Screen Saver
The screen saver appears when you leave the player in Stop mode for about five minutes.
1. Press DISPLAY during playback.
2. Press v / V to select the time clock icon and
“--:--:--” appears.
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press CLEAR to remove the
numbers you entered. Then input the correct
numbers.
Displaying Disc Information On-Screen
You can display various information about the disc
loaded on-screen.
1. Press DISPLAY to show various playback information.
The items displayed differ depending on the disc
type or playing status.
4. Press ENTER to confirm. Playback starts from
the selected time.
Note:
This function may not work on some disc or titles.
Marker Search
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears
on the TV screen briefly. Repeat to enter up to nine
markers.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker search menu appears on the screen.
2. Within 10 seconds, press b / B to select a marker number that you want to recall or clear.
3. Press ENTER and playback starts from the
marked scene. Or, Press CLEAR and the marker
number is erased from the list.
4. You can play any marker by inputting its number
on the marker search menu.
Notes:
• This function may not work on some disc or
titles.
•
All marked points are cleared if you press
STOP (x) twice or unload the disc. (complete
stop).
2. During playback, you can select an item by
pressing v / V and change or select the setting
by pressing b / B.
Title – Current title number/total number of
titles.
Chapter – Current chapter number/total number of chapters.
Time – Elapsed playing time.
Audio – Selected audio language or channel.
Subtitle – Selected subtitle.
Angle – Selected angle/total number of angles.
Operation
To enter a Marker
Notes:
• If no button is pressed for a few seconds, the onscreen display disappears.
• A title number cannot be selected on some discs.
• An item may not be available on some discs or
titles.
21
Special Features for HD DVD
Multi Title List function HD DVD
HD DVD Twin Format Discs HD DVD
Some HD DVD with HDi features has several Title
Lists. In this case, you can select one of the Title
Lists using [More Title List] option in the HD DVD
menu.
If you insert an HD DVD Twin Format Disc with both
HD DVD and DVD layers on one side, you must
select HD DVD or DVD to start playback.
1. Insert an HD DVD Twin Format Disc.
The choice menu will appear.
1. Press DISC MENU or TITLE during HD DVD
playback.
The HD DVD menu will appear.
2. Select HD DVD or DVD on the menu then press
ENTER. The selected playback format begins.
2. Use b / B buttons to select [Title] option then
press ENTER.
Notes:
• You cannot change the format during playback.
• To change the format, press OPEN/CLOSE to
open the disc tray then close the disc tray.
• You can only use POWER, b / B, and ENTER
buttons when the choice menu is displayed.
3. Use b / B to select [More Title List] option then
press ENTER.
Using the HD DVD with HDi features
4. Select a Title List then press ENTER.
HD DVD
You can change title number, scene number, etc
using the HD DVD menu.
1. Press DISC MENU or TITLE during HD DVD
playback.
The menu will appear.
The playback starts from the beginning of the
selected Title List.
Special Features for BD-ROM
Note:
The above HD DVD menu is displayed only
when an HD DVD disc with HDi features is
playing.
2. Use the b / B buttons to select an option, then
press ENTER.
The sub options will appear.
Play / Pause – Starts playback / pauses
playback.
Title – Selects a title on a disc.
You cannot select a title whose number is
shown a gray colour because the title is
recorded with black by contents providers.
It is normal.
Scene – Selects a scene in a title.
Subtitle – Selects a subtitle language.
Audio – Selects an audio language, for
playback only.
3. Use the b / B buttons to select a sub option,
then press ENTER to acknowledge the selection.
22
BD Hybrid Discs BD
If you insert an BD Hybrid Discs having both BD and
DVD layers on one side, you must select BD or DVD
to start playback.
1. Insert a BD Hybrid Disc.
The choice menu will appear.
2. Select BD or DVD on the menu then press
ENTER. The selected playback format begins.
Notes:
• You cannot change the format during playback.
• To change the format, press OPEN/CLOSE to
open the disc tray then close the disc tray.
• You can only use POWER, b / B, and ENTER
buttons when the choice menu is displayed.
Reference
Controlling other TVs with the
Universal Remote Control
Controlling an LG TV with the
Supplied Universal Remote
Control
You can control the volume, input source, and power
state of non-LG TVs as well. If your TV is listed in
the table on the next page, set the appropriate manufacturer code.
You can control the volume, input source, and power
state of your LG TV with the supplied Universal
Remote Control.
You can control your TV using the buttons below.
1. While holding down TV POWER button, press
the number buttons to select the manufacturer
code for your TV (Refer to table on the next
page).
2. Release TV POWER button.
TV POWER
Button
Notes:
• Depending on your TV, some or all buttons may
not function on the TV, even after entering the
correct manufacturer code.
TV Control
Buttons
Number
Buttons
By pressing
You can
TV POWER
AV
Turn the TV on or off.
Switch the TV’s input source
between the TV and other input
sources.
PR +/–
Scan up or down through
memorized channels.
VOL +/–
Adjust the volume of the TV.
MUTE
Temporarily turns TV sound
OFF, press again to restore.
•
If you enter a new code number, the code number previously entered will be erased.
•
When you replace the batteries of the remote,
the code number you have set may be reset to
the default setting. Set the appropriate code
number again.
Reference
Note:
Depending on the unit being connected, you may
not be able to control your TV using some of the
buttons.
23
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find the one that works with
your TV.
BRANDS
ADMIRAL
ADYSON
AKAI
AKURA
ALBA
ALLSTAR
AMSTRAD
AMWAY
ANITECH
ANTECNO
ARC EN CIEL
ASA
ASBERG
ASORA
ATLANTIC
AUDIOSONIC
AUTOVOX
BANK
BEKO
BESTAR
BLAUPUNKT
BONDSTEC
BOSCH
BRANDT
ELECTRONIQUE
BRIONVEGA
BSR
BUSH
CENTURY
CGE
CIE
CLATRONIC
CLARIVOX
CONDOR
CONIC
CONTEC
CONTINENTAL
EDISON
COSMOS
CROSLEY
CROWN
CODES
137 204
159 219
009 010 108 132
133 135 139 140
156 174 175
064 086 108 110
155 171
009 060 064
108
006 025 157
108
010 049 108 185
219
064
173 179 239
087 102 108 235
236
185
171
089 197
085
159 163 197
232
045 085 086 108
250
086
031 091 092 096
097 098 099 210
253
163
210
173 179 225 239
204
144
009 136 139 144
232
165 204
139 165 210
025 108 170
009 010 064 108
144 149 159 164
165 171 185
033
108 149 191
219
171 222
173 179 225 239
108
165
084
144
CS-ELECTRONICS 064
DAEWOO
051
170
DANSAI
010
DE GRAAF
108
DECCA
070
162
206
DECCAVIDEO
108
DUAL
233
DUMONT
204
24
204
085 086 108
171 185
108 120 127
219
134
108 159 161
184 189 190
BRANDS
ELBE
CODES
058 144 157 160
192 246
ELBIT
108 248
ELECTROVENDA 108
ELEKTRONIKA
108
ELIN
108
ELITE
064 149
ELMAN
144
ELTA
010 171
EMERSON
108 204
ESC
108
ETRON
133
EUROPHON
144 159
EXPERT
089
FENNER
171
FERGUSON
078 079 080 160
182 195 198 199
200 201 202
FINLANDIA
194 195
FINLUX
008 087 102 104
105 107 108 140
144 159 161 174
189 235 236
FIRST-LINE
144
FISHER
086 208 222 233
FORMENTI
108 149
FRABA
108
FRONTECH
136 171 220
FUBA
073 109
FUJITSU GENERAL 088 159 197
FUNAI
010
GALAXIS
108 185
GALERIA
171
GBC
137 144 171
GEC
011 108 129 147
159 189
GELOSO
064 137 144 164
171
GENERAL
171
GENERAL TECHNIC 171
GOLDHAND
159 171
GOLDSTAR
038 050 108 110
136 144 159 163
166 171 191 219
237
GOODMANS
009 064 108 109
110 120 159 170
171
GORENJE
086
GPM
010 064
GRANADA
027 105 108 111
121 134 140 159
162 167 187 194
195 238
GRUNDIG
091 092 093 094
095 097 098 100
101 172 232 238
HCM
010 108 159 171
HIFIVOX
173 179 239
HINARI
010 064 108 133
171
HIT
204
BRANDS
HITACHI
CODES
011 013 015 017
021 022 023 024
028 029 030 035
039 040 041 048
053 054 055 056
057 120 127 128
129 134 135 140
143 145 147 151
156 159 173 193
219
HYPER
009 159 163 171
ICE
009 010 064 108
171
IMPERIAL
043 049 108 139
144 154 165 255
INGERSOLL
171
INNO HIT
159 189 237
INTERBUY
010
INTERCORD
233
INTERFUNK
108 109 113 130
133 134 135 137
141 146 147 148
165 179 210
INTERVISION
010 086 108 132
144 166
IRRADIO
163 235 237
ITC
144 159
ITS
009 010 064 171
ITT
141 151 186
JVC
009 169
KAIDO
136
KAPSCH
089 147 148 197
KARCHER
084 108
KATHREIN
109
KAWA
009
KENDO
060 108 137 157
KENNEDY
197
KNEISSEL
108
KONKA
009
KORTING
086 204 209
KUBA
233
KUBA ELECTRONIC 233
KURA
134
LENCO
108 170
LG
001(Default) 038
050 108 110 136
144 159 163 166
171 191 219 237
LIESENKOTTER
108 210
LIFETEC
010 064 108 170
LOEWE
109 113 204 205
LOGIK
070 227
LUMA
137 197
LUXOR
102 104 132 133
134 135 138 140
143 145 153 156
174 186 237
M ELECTRONIC
103 104
MAGNADYNE
163 164 204
MAGNAFON
199
MAGNASONIC
108
MARANTZ
108
MARSHAL
064
MATSUI
009 016 025 060
061 062 063 070
108 131 136 152
154 159 171 172
CODES
132
047 092 097 098
100 101 108 204
207 254
MITSUBISHI
075 076 077 097
113 204 222 224
240
MIVAR
044 042 159 235
MNARTT
007
MTC
086 109 134
MULTITECH
136 159 171 185
MURPHY
232
NAONIS
137
NECKERMANN
037 059 060 092
098 100 101 108
109 113 115 118
119 134 135 137
143 157 159
NEI
064 108
NIKKAI
219
NIKKO
108
NOBLIKO
232 235
NOGAMATIC
173 179 239
NOKIA
014 019 032 102
103 104 108 132
133 134 135 138
140 141 145 146
147 148 156 174
NORDMENDE
129 173 179 180
181 193 195 225
226 228 239
NORMN
108
NOVA
087
OCEANIC
032 103 104 135
140 156
OKANO
108
ONWA
009 010 064
ORAVA
108
ORBITER
086
ORION
025 059 060 061
062 064 070 108
110 118 219
OSAKE
106
OTTO-VERSAND 002 005 009 014
059 060 081 082
083 085 092 097
098 100 101 108
109 111 113
PAEL
235
PANASONIC
002 003 005 167
168 229
PATHE CINEMA
144
PATHE MARCONI 173 179 225 239
PHILCO
090 108 139 144
148 165 204
PHILIPS
065 066 067 068
069 092 108 109
111 112 114 115
116 119 122 123
124 125 193 212
251 252
PIONEER
193
PRANDONI-PRINCE 137 235
PRIMA
219
PRO VISION
108
BRANDS
PROFEX
PROFITRONIC
QUELLE
RADIOLA
RADIOTONE
REDIFUSSION
REVOX
REX
RFT
RITAR
ROADSTAR
ROSITA
SABA
SAISHO
SAKIO
SALORA
SAMBERS
SAMSUNG
SANY
SANYO
SCHNEIDER
SEG
SEI-SINUDYNE
SELECO
SENTRA
SHARP
SHINTOM
SHINTOSHI
SHIVAKI
SIAREM
SIEMENS
SIESTA
SILVER
SINGER
SINUDYNE
SMARAGO
SOLAVOX
SONOLOR
SONTEC
SONY
CODES
108 136 171
108
002 010 014 019
025 059 060 072
084 086 087 088
092 097 098 100
101 102 175
108
010 085 108 171
187
109
088 089 137 157
158 164 197 246
247
064 085 135 204
138
108
171
079 146 147 173
179 181 193 195
225 226 239
025 060 070 136
159
171
019 032 103 104
132 133 134 135
137 138 140 142
143 145 150 156
174 237 241
235
004 010 050 086
108 117 126 171
220 237
193
014 018 019 020
032 034 071 086
087 189 218 221
222 223
009 064 088 108
133 141 159 163
233
010 064 108 144
159 165 171 185
219
025 108 204 212
088 089 137 157
197 222
064 133
081 082 083 222
108
108
108
204
092 096 097 098
100 101 108 210
218 219 221
085
010 064
108 164 204
118 131
172
133
140 156
108
072 074 211 212
213 214 215 216
217 222
BRANDS
SPECTRA
STARLITE
STARLUX
STERN
CODES
170
108 171
171
088 089 137 157
197
SUNSTAR
108 171
SUPERTECH
108 139 152 171
TADISTAR
108
TASHIKO
108 159 218
TEC
108 139 144 159
170 171
TECHLINE
185
TECHNISAT
108 165
TECNISON
108 171
TEKON
171
TELEAVIA
173 178 179 225
239
TELEFUNKEN
079 177 179 181
193 195 200 210
TELEOPTA
171
TELERNT
109
TELETECH
165 171
TELETEXT
115
TELETON
088
TELETON
089 134 159 197
TENSAI
064 108 144 149
171 191
TENSON
171
TESLA
204
THOMSON
052 078 079 134
173 178 179 181
193 195 225 239
THORN
011 014 016 018
026 028 066 072
075 087 097 102
108 116 135 141
145 146 160
THORN-FERGUSON 160 188 200 227
TOSHIBA
012 016 026 036
037 222 232
TOWADA
144 185
TRISTAR
010 064
TRIUMPH
025 219 236
UHER 089
108 109 149 185
197 233
ULTRAVOX
108 164 185 204
UNIVERSUM
174
UNIVOX
204
VESTEL
108
VIDEOSAT
165
VIDEOTON
178 193
VIDEOWAY
230
VISION
108 149
VOXSON
137 204
WALTHAM
178
WATSON
064 108 149 171
WEGA
208 222
WHITE
108 110 149
WESTINGHOUSE
YOKO
010 064 108 136
144 159 164 170
171
ZANUSSI
137 197
ZENITH
231
Reference
BRANDS
MERRIT
METZ
25
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Code
6566
6565
6570
8381
6577
6582
7289
6583
6589
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose an Area code from this list.
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
26
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
Area
Code
Ethiopia
ET
Fiji
FJ
Finland
FI
France
FR
Germany
DE
Great Britain
GB
Greece
GR
Greenland
GL
Herd and Mcdonald Islands HM
Hong Kong
HK
Hungary
HU
India
IN
Indonesia
ID
Israel
IL
Italy
IT
Jamaica
JM
Japan
JP
Kenya
KE
Kuwait
KW
Libya
LY
Luxembourg
LU
Area
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Code
MY
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
PY
PH
PL
PT
RO
RU
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
SA
SN
SG
SK
SI
ZA
KR
ES
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Troubleshooting
Correction
Possible Cause
No power.
• The power cord is disconnected.
• Plug the power cord into the wall outlet securely.
The power is on, but
the player does not
work.
• No disc is inserted.
• Insert a disc. (Check the disc indicator in the display window is lit.)
No picture.
• The TV is not set to receive DVD signal output.
• Select the appropriate video input
mode on the TV.
• The video cable is not connected
securely.
• Connect the video cable securely.
• The selected resolution is not capable with your TV.
• Select another resolution using
RESOLUTION button.
• The equipment connected with the
audio cable is not set to receive disc
signal output.
• Select the correct input mode of the
audio receiver so you can listen to
the sound from the player.
• The power of the equipment connected with the audio cable is turned off.
• Turn on the equipment connected
with the audio cable.
• The [Audio] options are set to the
wrong position.
• Set the [Audio] options to the correct
position, then turn on the player
again by pressing POWER.
• An unplayable disc is inserted.
• Insert a playable disc. (Check the
disc type and regional code.)
• The rating level is set.
• Change the rating level.
• The Remote Control is not pointed at
the remote sensor on the player.
• Point the Remote Control at the
remote sensor of the player.
• The Remote Control is too far from
the player.
• Operate the Remote Control closer to
the player.
No sound.
The player does not
start playback.
The Remote Control
does not work properly.
Maintenance and Service
Cleaning the unit
Refer to the information in this chapter before contacting a service technician.
To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Handling the Unit
Do not use strong solvents such as alcohol, benzene,
or thinner, as these might damage the surface of the
unit.
When shipping the unit
Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally
packed at the factory.
Keeping the exterior surfaces clean
Use the supplied cloth for cleaning the surfaces of
the player.
•
Do not use volatile liquids such as insecticide
spray near the unit.
•
Wiping with strong pressure may damage the
surface.
•
Do not leave rubber or plastic products in contact with the unit for a long period of time. since
they could marks on the surface.
Maintaining the Unit
The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or
worn, the picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
For details, please contact your nearest authorized
service centre.
Reference
Symptom
27
Specifications
General
Power requirements:
AC 110-240V, 50/60Hz
Power consumption:
30W
Dimensions (W x H x D):
Approx. 17 x 3.1 x 9.9 inches (430 x 79 x 250 mm) without feet
Weight (Approx.):
4.1 kg (9.1 lbs)
Operating temperature:
41 °F to 95 °F (5 °C to 35 °C)
Operating humidity:
5 % to 90 %
Outputs
VIDEO OUT:
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
COMPONENT VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω,negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
HDMI OUT (video/audio):
19 pin (HDMI standard, Type A)
ANALOG AUDIO OUT:
2CH: 2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
6CH: 2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack x 6
DIGITAL OUT (COAXIAL):
0.5 V (p-p), 75 Ω, RCA jack x 1
DIGITAL OUT (OPTICAL):
3 V (p-p), Optical jack x 1
System
Laser:
Semiconductor laser, wavelength: 405nm / 650 nm
Signal system:
Standard PAL/NTSC Colour TV system
Frequency response:
8 Hz to 44 kHz (96 kHz Sampling)
8 Hz to 22 kHz (48 kHz Sampling)
Signal-to-noise ratio:
More than 100 dB (ANALOG OUT connectors only)
Harmonic distortion:
Less than 0.008%
Dynamic range:
More than 95 dB
Accessories:
Component Video cable (1)
Video cable (1)
Audio cable (1)
Remote control (1)
Batteries (2)
Cloth for cleaning the surfaces of the player (1)
Note: Design and specifications are subject to change without prior notice.
28
Super Multi Blue Player’s Audio Output Specifications
Setting
2ch
Disc/format
BD-ROM
HD DVD
DVD Video
Analog Output
5.1ch
Digital (SPDIF/HDMI)
PCM
Bitstream*1
Dolby Digital
2ch
5.1ch
2ch PCM
Dolby Digital
Dolby Digital Plus
2ch
5.1ch
2ch PCM
Dolby Digital 5.1*2
Dolby TrueHD
2ch
5.1ch
2ch PCM
Dolby Digital 5.1*3
DTS
2ch
5.1ch
2ch PCM
DTS
DTS-HD
2ch
5.1ch
2ch PCM
DTS*4
Linear PCM 2ch
2ch
2ch
2ch PCM
2ch PCM
Linear PCM 5.1ch
2ch
5.1ch
2ch PCM
2ch PCM
Linear PCM 7.1ch
2ch
5.1ch
2ch PCM
2ch PCM
Dolby Digital
2ch
5.1ch
2ch PCM
Dolby Digital
Dolby Digital Plus
2ch
5.1ch
2ch PCM
Dolby Digital 5.1*2
Dolby TrueHD
2ch
2ch
2ch PCM
2ch PCM
DTS
2ch
5.1ch
2ch PCM
DTS
DTS-HD
2ch
5.1ch
2ch PCM
DTS*4
Linear PCM 2ch
2ch
2ch
2ch PCM
2ch PCM
Linear PCM 5.1ch
2ch
5.1ch
2ch PCM
2ch PCM
Linear PCM 7.1ch
2ch
5.1ch
2ch PCM
2ch PCM
Dolby Digital
2ch
5.1ch
2ch PCM
Dolby Digital
DTS
2ch
5.1ch
2ch PCM
DTS
Linear PCM
2ch
2ch*5
2ch PCM
2ch PCM
MPEG
2ch
2ch
2ch PCM
2ch PCM
*1: In case of Bitstream mode, interactive and secondary audio is not included in the output bitstream.
(Primary Audio Stream only)
*2: DD+5.1ch core stream only
*3: Dolby Digital 5.1 substream only
*4: DTS-HD 5.1ch core stream only
*5: In case of the source audio of 5.1 or 7.1 channels, the specification of output audio channels is 5.1.
•
Some discs allow you to change audio selections only via the disc menu. If this is the case,
press POP UP or DISC MENU button and choose the appropriate language from the selections on the
disc menu.
•
When you turn on the player or replace a disc, the player returns to the initial default setting. Depending
on a disc, a specific type of audio the disc has is output.
•
Immediately after you have switched sounds, there may be a temporary discrepancy between the display
and actual sound.
Reference
Notes:
29
Open source software notice
The following GPL executables and LGPL/MPL libraries used in this product are subject to the
GPL/LGPL/MPL License Agreements:
GPL EXECUTABLES:
Linux kernel 2.4.25
Busybox
Bash
e2fsprogs
LGPL LIBRARIES:
libuClibc.so
libstdc++.so
libdirectfb.so
libavcodec.so
libavformat.so
libiconv.so
libgcrypt.so
libgnutls.so
libgpg-error.so
MPL LIBRARIES:
libcairo.so
LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing
such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at:
smbp_opensource@lge.com
This offer is valid for a period of three(3) years from the date of the distribution of this product by LG
Electronics.
You can obtain a copy of the GPL, LGPL and MPL licenses from http://us.lge.com.
Portions of this software are copyright ©2003 The FreeType Project (www.freetype.org). All rights reserved.
The module, libjpeg.so used in this product is the work of the Independent JPEG Group.
© copyright 1991-1998, Thomas G. Lane. All rights reserved.
This product includes software developed by the University of California, Berkeley and its contributors.
Customer Support
To obtain the latest software for this player (if updates have been made), please visit http://in.lgservice.com.
Resetting the Player
If you observe any of the following symptoms...
You can reset the Player as follows:
Press and hold the POWER button for more than
When the Player is plugged in, but the power will
five seconds. This will force the Player to power
not turn on or off.
off. Press the POWER button again to turn the
Player back on.
When the display window is not working.
When the Player does not operate normally.
Unplug the power cord and then plug the power
cord again after more than five seconds.
30
P/NO : MFL36364134
Download PDF