LG | DV652 | LG DV652 Owner’s Manual

OWNER’S MANUAL
DVD Player
Please read this manual carefully before operating
your set and retain it for future reference.
DV622
DV652
P/NO : MFL67206401
Getting Started
3
Safety Information
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
1
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
4
Getting Started
This device is equipped with a portable battery or
accumulator.
1
Getting Started
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
Notes on Copyrights
 This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Rovi Corporation.
Reverse engineering or disassembly is prohibited.
 Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, DVDs, CDs and other
materials may subject you to civil and/or criminal
liability.
Notes on Discs
 Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on
the disc.
 After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
to direct sunlight.
Notes on the Unit
 Please save the original shipping carton and
packing materials. If you need to ship the unit,
for maximum protection, re-pack the unit as it
was originally packed at the factory.
 To clean the unit, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth
lightly moistened with a mild detergent solution.
Do not use strong solvents such as alcohol,
benzine, or thinner, as these might damage the
surface of the unit.
 The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest
authorized service center.
Table of Contents
5
Table of Contents
1
1
Getting Started
4
Operating
3
6
6
6
6
6
7
7
8
9
9
Safety Information
Introduction
– About the “7” Symbol Display
– Symbols Used in this Manual
– Supplied Accessories
– Playable Discs
– File compatibility
– Regional Code
Remote control
Front panel
Rear panel
14
14
14
14
15
15
15
16
17
General Playback
– Playing a Disc
– Playing a file
– On-Screen display
– General operation
Advanced Playback
– Movie
– Music
– Photo
5
Troubleshooting
2
Connecting
18
Troubleshooting
10
10
10
11
11
11
Connecting to your TV
– Connecting Video / Audio cable
– Connecting Component Video Cable
Connecting to an Amplifier
– Connecting Audio cable
– Connecting COAXIAL
(digital audio) cable
6
Appendix
19
20
21
21
Area Code List
Language Code List
Specifications
Trademarks and Licenses
3
System Setting
12
12
12
12
12
13
13
13
Settings
– Adjust the Setup Settings
– [LANGUAGE] Menu
– Menu Language
– [DISPLAY] Menu
– [AUDIO] Menu
– [LOCK] Menu
– [OTHERS] Menu
2
3
4
5
6
6
Getting Started
Introduction
Playable Discs
DVD-VIDEO (8 cm / 12 cm disc)
1
About the “7” Symbol Display
Getting Started
“7” may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that
specific media.
Symbols Used in this Manual
A section whose title has one of the following
symbols are applicable only to the disc or file
represented by the symbol.
r
t
DVD-Video, DVD±R/RW
Audio CDs
y
Video files contained in the
Disc/USB
u
Audio files contained in the
Disc/USB
i
Photo files contained in the
Disc/USB
Supplied Accessories
- Discs such as movies that can be
purchased or rented.
DVD±R (8 cm / 12 cm disc)
- Video mode and finalized only
- Supports the dual layer disc also
- DVD±R discs that contain Video,
Audio or Photo files.
DVD-RW (8 cm / 12 cm disc)
- VR mode, Video mode and
finalized only
- DVD-RW discs that contain Video,
Audio or Photo files.
DVD+RW (8 cm / 12 cm disc)
- Video mode and finalized only
- DVD+RW discs that contain Video,
Audio or Photo files.
Audio CD (8 cm / 12 cm disc)
CD-R/RW (8 cm / 12 cm disc)
- CD-R/RW discs that contain audio
titles, Video, Audio or Photo files.
, Note
RCA Video/Audio
cable (1)
Battery (1)
Remote control (1)
You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the players when formatting
rewritable discs. When setting the option
to Live System, you cannot use it on player.
(Mastered/Live File System: Disc format system
for windows Vista)
Getting Started
File compatibility
7
Photo Files
Photo size: Less than 2M recommended.
Overall
 The file name is limited to 35 characters.
 Depending on the size and number of the files,
it may take several minutes to read the contents
on the media.
Maximum Files/Folder: Less than 600 (total
number of files and folders)
,
Note of USB Device
 Do not extract the USB device during
operation (play, etc.).
 A USB device which requires additional
program installation when you have
connected it to a computer, is not
supported.
CD-R/RW, DVD±R/RW Format: ISO 9660
 USB device: USB device that supports
USB1.1 and USB2.0.
Video Files
 Movie, music and photo files can be played.
For details of operations on each file, refer to
relevant pages.
Available resolution size: 720 x 576 (W x H) pixels
Playable subtitle: SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.
txt), SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD
Subtitle System (.txt)
Playable Codec format: “DIVX3.xx”, “DIVX4.xx”,
“DIVX5.xx”, “XviD”, “MP43”, ”3IVX”
Playable Audio format: “Dolby Digital”, ”DTS”
“PCM”, “MP3”, “WMA”
Sampling frequency: within 8 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
Bit rate (MP3/WMA/DivX): within 8 to 320 kbps
(MP3), within 32 to 192 kbps (WMA), less than 4
Mbps (DivX)
, Note
This unit does not support files that are
recorded with GMC*1 or Qpel*2. Those are video
encoding techniques in MPEG4 standard, like
DivX have.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
Audio Files
Sampling frequency: within 8 to 48kHz (MP3),
within 32 to 48kHz (WMA)
Bit rate: within 8 to 320 kbps (MP3), within 32 to
192kbps (WMA)
 Regular back up is recommended to
prevent data loss.
 If you use a USB extension cable, USB HUB
or USB Multi-reader, the USB device may not
be recognized.
 Some USB device may not work with this
unit.
 Digital camera and mobile phone are not
supported.
 USB Port of the unit cannot be connected
to PC. The unit cannot be used as a storage
device.
Regional Code
This unit has a regional code printed on the rear of
the unit. This unit can play only DVD discs labeled
same as the rear of the unit or “ALL”.
1
Getting Started
Available File extensions: “.avi”, “.mpg”, ”.mpeg”,
“.mp3”, “.wma”, “.jpg”, “.jpeg”
 Progressive and lossless compression photo
image files are not supported.
8
Getting Started
Remote control
• • • • • • • • • • c• • • • • • • • • •
1
DVD MENU: Accesses or exits the DVD menu.
Getting Started
TITLE: Accesses the disc’s title menu, if available.
w/s/a/d: Navigates the menus.
ENTER (b): Confirms menu selection.
DISPLAY: Accesses or exits On-Screen Display.
RETURN (x): Moves backward or exit the menu.
AUDIO ([): Selects an audio language or audio
channel.
SUBTITLE (]): Selects a subtitle language.
ANGLE (}): Selects a DVD camera angle, if
available.
SETUP: Accesses or exits the setup menu.
• • • • • • • • • • d• • • • • • • • • •
?
REPEAT: Repeats a chapter, track, title or all.
A-B: Repeats a section.
ZOOM: Enlarges video image
• • • • • • • • • • a• • • • • • • • • •
?: This button is not available.
POWER (1): Switches the unit ON or OFF.
OPEN/CLOSE (B): Opens and closes the disc tray.
Battery Installation
Numerical buttons: Selects numbered items in a
menu.
Remove the battery cover on the rear of the Remote
Control, and insert R03 (size AAA) battery with 4
and 5 matched correctly.
CLEAR: Removes a track number on the Program
List.
PROGRAM: Enters the program edit mode.
• • • • • • • • • • b• • • • • • • • • •
SCAN (c/v): Searches backward or forward.
SKIP (C/V): Goes to the next or previous
chapter / track / file.
PAUSE/STEP (M): Pauses playback.
PLAY (z): Starts playback.
STOP (Z): Stops playback.
Getting Started
9
Front panel
DV622
1
Getting Started
DV652
a Disc Tray
f Power indicator (DV622 only)
b B (Open / Close)
g USB Port
c Display Window
h d (Play)
d Remote Sensor
Z (Stop)
e 1 (Power)
C/V (Skip)
Rear panel
a AC power cord
d VIDEO OUTPUT
b DIGITAL AUDIO OUTPUT (COAXIAL)
e COMPONENT / PROGRESSIVE SCAN
OUTPUT (Y PB PR)
c AUDIO OUTPUT (Left/Right)
10
Connecting
Connecting to your TV
Connecting Video / Audio
cable
2
Connect the VIDEO/AUDIO OUTPUT on the unit
to VIDEO/AUDIO IN on TV with A/V cable, such as
VIDEO with yellow, AUDIO Left/Right with white/
red.
Connecting Component Video
Cable
Connect the COMPONENT/PROGRESSIVE SCAN
OUTPUT jacks on the unit to the corresponding
input jacks on the TV using Component video
cable, such as Y with green, Pb with blue, and Pr
with red.
Connecting
Rear of the Unit
Rear of the Unit
Component
Cable
Audio/Video
Cable
TV
TV
 If your TV accepts progressive format signals, you
must use this connection and set [Progressive
Scan] to [On] on the setup menu.(See page 12)
 You should still connect the AUDIO cable
between the unit and TV.
Connecting
Connecting to an
Amplifier
Connecting Audio cable
Connecting COAXIAL
(digital audio) cable
Connect one of the unit’s DIGITAL AUDIO OUTPUT
(COAXIAL) jacks to the corresponding jack on your
amplifier.
Connect the AUDIO OUTPUT on the unit to 2CH
AUDIO IN on amplifier with Audio cable, such as
AUDIO Left/Right with white/red.
2
Receiver / Amplifier
Rear of the Unit
Audio Cable
OPTICAL
 If your TV is not capable of handling 96 kHz
sampling frequency, set the [Sample Freq.]
option to [48 kHz] on the setup menu.
 If your TV is not equipped with Dolby Digital
and MPEG decoder, set the [Dolby Digital] and
[MPEG] options to [PCM] on the setup menu.
, Note
 If the audio format of the digital output
does not match the capabilities of your
amplifier, the amplifier will produce a strong,
distorted sound or no sound at all.
 To see the audio format of the current disc
in the on-screen display, press AUDIO.
 This unit does not perform internal (2
channel) decoding of a DTS sound track.
To enjoy DTS multi channel surround, you
must connect this unit to a DTS compatible
amplifier via one of this unit’s digital audio
outputs.
Connecting
Rear of the Unit
Coaxial Cable
Receiver / Amplifier
11
12
System Setting
Settings
[DISPLAY] Menu
When the unit is turned-on at the first time, you
have to select the desired language.
TV Aspect
Adjust the Setup Settings
You can change the settings of the unit in the
[Setup] menu.
1. Press SETUP.
2. Use w/s to select the first setup option, and
press d to move to the second level.
3
3. Use w/s to select a second setup option, and
press d to move to the third level.
System Setting
4. Use w/s to select a desired setting, and press
ENTER (b) to confirm your selection.
Select which screen aspect to use based on the
shape of your TV screen.
[4:3]: Select when a standard 4:3 TV is
connected.
[16:9]: Select when a 16:9 wide TV is
connected.
Display Mode
If you selected 4:3, you’ll need to define how you
would like widescreen programs and films to be
displayed on your TV screen.
[LANGUAGE] Menu
[Letterbox]: This displays a widescreen picture
with black bands at the top and bottom of the
screen.
Menu Language
[Panscan]: This fills the entire 4:3 screen,
cropping the picture as necessary.
Select a language for the Setup menu and onscreen display.
Disc Audio/Disc Subtitle/Disc Menu
Select a language for the Disc Audio/Disc Subtitle/
Disc Menu.
[Original]: Refers to the original language in
which the disc was recorded.
[Other]: To select another language, press
number buttons then ENTER (b) to enter the
corresponding 4-digit number according to
the language code list. (See page 20) If you make
a mistake while entering number, press CLEAR
to delete numbers then correct it.
[Off ](for Disc Subtitle): Turn off Subtitle.
Progressive Scan
(For Component Video connection)
Selects whether the COMPONENT/PROGRESSIVE
SCAN OUTPUT jacks output progressive signal. If
your TV accepts progressive format signals, you will
enjoy accurate color reproduction and high quality
image by selecting [On]. If your TV does not accept
progressive format signals, select [Off ].
If you set Progressive Scan to [On] in error, you
must reset the unit. First, remove the disc in the
unit. Next, press and hold STOP for five seconds.
The video output will be restored to the standard
setting, and a picture will be visible on your TV.
System Setting
[AUDIO] Menu
[OTHERS] Menu
Dolby Digital / DTS / MPEG
B.L.E (Black Level Expansion)
Set the unit’s Audio options according to various
disc output type you use.
To select the black level of playback pictures, set
your preference and monitor’s ability.
13
It just operates when TV system is set to NTSC.
Sample Freq. (Frequency)
Selects the sampling frequency of the audio signal
between [48KHz] and [96KHz].
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this effect.
Set to [On] only when a multi-channel karaoke DVD
is playing. The karaoke channels on the disc mix
into normal stereo sound.
ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX, Inc. This is an official DivX Certified®
device that plays DivX video. Visit divx.com for more
information and software tools to convert your files
into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX
VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete
your registration.
[LOCK] Menu
Firstly, you have to create the 4-digit password on
[Area Code] to use the LOCK menu.
If you forget your password you can reset it. First,
remove the disc in the unit. Display setup menu
then input the 6-digit number “210499”.
The “P CLr” appear in the display window and the
password is deleted. (DV652 only)
Rating
Select a rating level. The lower the level, the stricter
the rating. Select [Unlock] to deactivate the rating.
Password
Sets or changes the password for lock settings.
Area Code
To input the standardized area code referring the
area code list on page 19.
[Register]: Displays the registration code of
your unit.
[Deregister]: Deregister your unit and display
the deregister code.
REC Bitrate
You can choose a bit rate for USB direct recording.
Higher bit rate gives the better sound quality but
uses more space on the USB Flash Drive. For USB
direct recording, see page 16.
3
System Setting
Vocal
DivX(R) VOD
14
Operating
General Playback
On-Screen display ry
You can display and adjust various information and
settings about the content.
Playing a Disc rt
1. Press OPEN/CLOSE (B), and place a disc on the
disc tray.
2. Press OPEN/CLOSE (B) to close the disc tray
For the most DVD-ROM discs, playback starts
automatically.
For the Audio CD, select a track using w/s/
a/d and press PLAY (z) or ENTER (b) to
play the Track.
Playing a file yui
1. Press OPEN/CLOSE (B) to place a disc on the
disc tray, or connect the USB device.
4
2. Select a file using w/s/a/d, and press PLAY
(z) or ENTER (b) to play the file.
1. While playback, press DISPLAY to show various
playback information.
2. Select an option using w/s.
3. Use a/d and numerical button to adjust the
selected option value.
4. Press RETURN(x) to exit the On-Screen display.
Current title number/total
number of titles
Current chapter number/total
number of chapters
Elapsed playing time
Selected total time of current
title/file
Operating
Selected audio language or
channel
RETURN (x)
Changes between Disc and
USB Device.
Selected subtitle
TITLE
Changes the mode. (MUSIC :
PHOTO : MOVIE)
Selected angle/total number
of angles
Operating
General operation
15
Advanced Playback
To
Do this
Playback
Press PLAY (z)
Pause
Press PAUSE/STEP (M)
Movie ry
Stop
Press STOP (Z)
To
Do this
Display disc
menu
Press DVD MENU. (DVD Only)
Play
repeatedly
Press REPEAT during playback. To
select an option to be repeated,
Press REPEAT repeatedly.
Skip to the next Press C or V during
or previous
playback.
Fast forward or Press c or v during
fast reverse
playback. (Press and hold C
or V on the front panel)
Resume
playback
 Press STOP (Z) once:
Displayed MZ on the screen
(Resume Stop)
 Press STOP (Z) twice:
Displayed Z on the screen
(Complete Stop)
Select the proper menu by
continuously pressing TITLE as
[MUSIC], [PHOTO], and [MOVIE].
System Select
You must select the appropriate
system mode for your TV system.
Remove any disc that might
be in the unit, press and hold
PAUSE/STEP (M) for more than
five seconds to be able to select
a system (PAL, NTSC, AUTO).
Leave the unit in Stop mode for
about five minutes, then the
screen saver appears.
If the Screen Saver is displayed
for five minutes, the unit automatically turns itself off.
Power Resume Even if the power suddenly goes
out, turn on the unit and then
it plays from a position where
the contents is being played,
because the position is stored
every 60 seconds.
Last Scene
Turn off the unit, then the unit
Memory
memorize the lastly viewed
scene even if disc is inserted
again after removal or unit is
turned on after off with same
disc. (DVD/ Audio CD only)
Play frame-by- Press PAUSE/STEP (M) while
frame
Video file playback and press
PAUSE/STEP (M) repeatedly to
play frame-by-frame playback.
Repeat a
specific
portion
Press A-B at the beginning of the
portion you wish to repeat and
again at the end of the portion.
To return to normal playback,
press A-B to select [Off ].
Set the desired Searches for the starting point
starting time of of entered time code. Press
playback
DISPLAY then select clock
icon. Enter a time then press
ENTER(b).
For example, to find a scene
at 1 hour, 10 minutes, and 20
seconds, enter “11020” and press
ENTER(b).
If you enter the wrong number,
press CLEAR to enter again.
Change the
Press and hold SUBTITLE for 3
subtitle code seconds during playback. The
page
language code will appear.
(Video file
Press a/d to select another
only)
language code until the subtitle
is displayed properly and then
press ENTER (b)
Slow down the While the playback is paused,
playing speed press v repeatedly to play
(Forward only) various speeds of slow motion.
Press PLAY (z) to continue play
at normal speed.
4
Operating
Playback disc
or USB device
with several
kinds of files
Screen Saver
• DVD: Chapter/ Title/ Off
• MOVIE: Track/ All/ Off
Press STOP (Z) during playback
to save the stopped point.
16
Operating
Watch an
During playback or pause mode,
enlarged video press ZOOM repeatedly to select
zoom mode.
ZOOM: 100% : 200% : 300%
: 400% : 100%
w/s/a/d: Move through the
zoomed picture.
Record the
Audio CD to
USB device on
X2 speed
(ACD only)
Do this
Play
repeatedly
Press REPEAT during playback.
To select an item to be repeated,
Press REPEAT repeatedly.
 For all track recording: Press
AUDIO([) in complete stop
mode.
 For program list recording: In
stop mode, press AUDIO([)
after selecting a track on the
program list.
• TRACK / ALL
Create or
delete your
own program
Press the PROGRAM to select
desired file and then, { mark
appears on screen.
4
Using w/s and ENTER (b)
to add a music file(s) on the
program list,
Operating
If you add desired music file(s),
press PROGRAM to end edit
program list.
To clear a music file(s) from the
program list, select the music
file you want to clear then press
CLEAR in program edit mode.
To clear all music file(s) from the
program list, select [Clear All]
then press ENTER (b) in program
edit mode.
Display file
information
(ID3 TAG)
Insert an Audio CD, and then
select a track using w/s, DVD
MENU, or numerical buttons.
 For track recording: Press
AUDIO([) in play, pause or
resume stop mode.
Music tu
To
Connect USB Flash Drive to the
unit before recording.
, Note
 If you use this function, the “CD_REC” folder
will be created automatically in the USB
Flash Driver then the music file(s) is saved in
it.
 If you remove USB Flash Drive, turn off or
open the unit while recording, it can make a
malfunction.
 If the remaining space on the USB Flash
Drive is insufficient, the recording is not
available. To increase the free space, delete
files in it using your PC.
 CD-G disc and Audio CDs encoded in DTS
cannot be recorded.
 External HDD, Multi Card reader, Multi
Partition USB, Locked device and MP3 player
are not supported.
While playing a MP3 file
containing file information, you
can display the information by
pressing DISPLAY repeatedly.
 Recording format: MP3 file
 Depending on the MP3 files,
information may not be
displayed on the screen.
The making of unauthorized copies of copyprotected material, including computer programs, files, broadcasts and sound recordings,
may be an infringement of copyrights and
constitute a criminal offense. This equipment
should not be used for such purposes.
Be responsible
Respect copyrights
 Encoding Bit rate: 96 Kbps / 128 Kbps
Operating
17
Photo i
To
Do this
View photo
files as a slide
show
Use w/s/a/d to highlight
(`) icon then press ENTER (b)
to start slide show.
Adjust slide
show speed
You can change slide show
speed using a/d when (J)
icon is highlighted.
Rotate a photo Use w/s to rotate the photo in
full screen counterclockwise or
clockwise while viewing a photo
in full screen.
Watch an
While viewing a photo in full
enlarged Photo screen, press ZOOM repeatedly
to select zoom mode.
ZOOM: 100% : 200% : 300%
: 400% : 100%
w/s/a/d: Move through the
zoomed picture.
4
Operating
Listen to music You can listen to music during
during slide
slide show, if the disc contain
show
music and photo files together.
Use w/s/a/d to highlight
(~) icon then press ENTER (b)
to start slide show.
18
Troubleshooting
Troubleshooting
Symptom
Cause
Solution
No power
The power cord is disconnected.
Plug the power cord into the wall outlet
securely.
The power is on, but
the unit does not work.
No disc is inserted.
Insert a disc.
The unit does not start
playback.
An unplayable disc is inserted.
Insert a playable disc. (Check the disc type
and regional code.)
The rating level is set.
Change the rating level.
The remote control is not
pointed at the remote sensor
on the unit.
Point the remote control at the remote
sensor of the unit.
The remote control is too far
from the unit.
Operate the remote control closer to the unit.
Poor picture quality
and sound distortion
Fingerprints and dust are
stained on the disc.
Wipe the disc from the center to out with
a clean cloth. Do not use strong solvents.
(alcohol, benzine, thinner, commercially
available cleaners)
No picture
The TV is not set to receive the
signal from the unit.
Select the appropriate video input mode on
the TV.
The video cable is not
connected securely.
Connect the video cable securely.
The equipment connected with
the audio cable is not set to
receive the signal from the unit.
Select the correct input mode of the audio
amplifier.
The AUDIO options are set to
the wrong position.
Set the AUDIO settings to the correct
position.
The remote control
does not work properly.
5
Troubleshooting
No sound
Appendix
19
Area Code List
Choose an area code from this list.
Area
Code Area
Code Area
Code Area
Code
Afghanistan
AF Fiji
FJ Monaco
MC Singapore
SG
Argentina
AR Finland
FI Mongolia
MN Slovak Republic
SK
Australia
AU France
FR Morocco
MA Slovenia
SI
Austria
AT Germany
DE Nepal
NP South Africa
ZA
Belgium
BE Great Britain
GB Netherlands
NL South Korea
KR
Bhutan
BT Greece
GR Antilles
AN Spain
ES
Bolivia
BO Greenland
GL New Zealand
NZ Sri Lanka
LK
Brazil
BR Hong Kong
HK Nigeria
NG Sweden
SE
Cambodia
KH Hungary
HU Norway
NO Switzerland
CH
Canada
CA India
IN Oman
OM Taiwan
TW
Chile
CL Indonesia
ID Pakistan
PK Thailand
TH
China
CN Israel
IL Panama
PA Turkey
TR
Colombia
CO Italy
IT Paraguay
PY Uganda
UG
Congo
CG Jamaica
JM Philippines
PH Ukraine
UA
Costa Rica
CR Japan
JP Poland
PL United States
US
Croatia
HR Kenya
KE Portugal
PT Uruguay
UY
Czech Republic
CZ Kuwait
KW Romania
RO Uzbekistan
UZ
Denmark
DK Libya
VN
Ecuador
EC Luxembourg
Vietnam
RU Zimbabwe
SA
LY Russian
LU Federation
EG Malaysia
El Salvador
SV Maldives
Ethiopia
ET Mexico
MX
SN
ZW
6
Appendix
Egypt
MY Saudi Arabia
MV Senegal
20 Appendix
Language Code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
6
Appendix
Language
Code
Language
Code
Language
Code
Language
Code
Afar
6565
French
7082
Lithuanian
7684
Sindhi
8368
Afrikaans
6570
Frisian
7089
Macedonian
7775
Singhalese
8373
Albanian
8381
Galician
7176
Malagasy
7771
Slovak
8375
Ameharic
6577
Georgian
7565
Malay
7783
Slovenian
8376
Arabic
6582
German
6869
Malayalam
7776
Spanish
6983
Armenian
7289
Greek
6976
Maori
7773
Sudanese
8385
Assamese
6583
Greenlandic
7576
Marathi
7782
Swahili
8387
Aymara
6588
Guarani
7178
Moldavian
7779
Swedish
8386
Azerbaijani
6590
Gujarati
7185
Mongolian
7778
Tagalog
8476
Bashkir
6665
Hausa
7265
Nauru
7865
Tajik
8471
Basque
6985
Hebrew
7387
Nepali
7869
Tamil
8465
Bengali; Bangla
6678
Hindi
7273
Norwegian
7879
Telugu
8469
Bhutani
6890
Hungarian
7285
Oriya
7982
Thai
8472
Bihari
6672
Icelandic
7383
Panjabi
8065
Tonga
8479
Breton
6682
Indonesian
7378
Pashto, Pushto
8083
Turkish
8482
Bulgarian
6671
Interlingua
7365
Persian
7065
Turkmen
8475
Burmese
7789
Irish
7165
Polish
8076
Twi
8487
Byelorussian
6669
Italian
7384
Portuguese
8084
Ukrainian
8575
Chinese
9072
Japanese
7465
Quechua
8185
Urdu
8582
Croatian
7282
Kannada
7578
Rhaeto-Romance 8277
Uzbek
8590
Czech
6783
Kashmiri
7583
Rumanian
8279
Vietnamese
8673
Danish
6865
Kazakh
7575
Russian
8285
Volapük
8679
Dutch
7876
Kirghiz
7589
Samoan
8377
Welsh
6789
English
6978 Korean
7579
Sanskrit
8365
Wolof
8779
Esperanto
6979 Kurdish
7585
Scots Gaelic
7168
Xhosa
8872
Estonian
6984 Laothian
7679
Serbian
8382
Yiddish
7473
Faroese
7079 Latin
7665
Serbo-Croatian
8372
Yoruba
8979
Fiji
7074
Latvian, Lettish
7686
Shona
8378
Zulu
9085
Finnish
7073
Lingala
7678
Appendix
Specifications
AC 110-240 V, 50 / 60Hz
Power
consumption
8W
Dimensions
(W x H x D)
360 x 35 x 195 mm
Net Weight
(Approx.)
1.7 kg
Operating
temperature
5 °C to 35 °C
Operating
humidity
5 % to 90 %
Laser
Semiconductor laser
Signal system
NTSC/PAL
Bus Power Supply
(USB)
DC 5V 0 200 mA
VIDEO OUTPUT
1.0 V (p-p), 75 Ω, sync
negative, RCA jack x 1
COMPONENT /
PROGRESSIVE
SCAN OUTPUT
(Y) 1.0 V (p-p), 75 Ω, sync
negative, RCA jack x 1,
(Pb)/(Pr) 0.7 V (p-p), 75 Ω,
RCA jack x 2
ANALOG AUDIO
OUTPUT
2.0 Vrms (1 kHz, 0 dB), 600
Ω, RCA jack (L, R) x 1
DIGITAL OUTPUT
(COAXIAL)
0.5 V (p-p), 75 Ω, RCA jack
x1
Design and specifications are subject to change
without prior notice.
Trademarks and
Licenses
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
DivX®, DivX Certified® and associated logos are
trademarks of DivX, Inc. and are used under
license.
6
Appendix
Power
requirements
21
Download PDF