LG | J10HD | LG J10HD Owner’s Manual

J10HD-A_JA2ILLA_ENG_1005
2.1CH Home Theater System
OWNER’S MANUAL
MODEL: J10HD
SPEAKERS: J10HD-SF/J10HD-SA
USB
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and
completely.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: THESE SERVICING
INSTRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY.
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT PERFORM ANY
SERVICING OTHER THAN THAT
CONTAINED IN THE OPERATING
INSTRUCTIONS UNLESS YOU ARE
QUALIFIED TO DO SO.
Caution: The apparatus should not be
exposed to water (dripping or splashing)
and no objects filled with liquids, such as
vases, should be placed on the
apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch circuits.
Check the specification page of this owner's manual to be
certain.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance,
and have the cord replaced with an exact replacement
part by an authorized servicer.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed in
a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the
appliance.
To disconnect power from the mains, pull out the mains
cord plug. When installing the product, ensure that the
plug is easily accessible.
CAUTION:
CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED AVOID
EXPOSURE TO THE BEAM.
SERIAL NUMBER:
CAUTION: This product employs a Laser
System.
Model No. ______________________________
To ensure proper use of this product,
please read this owner’s manual carefully
and retain for future reference. Should the
unit require maintenance, contact an
authorized service center.
Use of controls, adjustments, or the
performance of procedures other than
those specified herein may result in
hazardous radiation exposure.
To prevent direct exposure to laser beam,
do not try to open the enclosure. Visible
laser radiation when open. DO NOT
STARE INTO BEAM.
WARNING: Do not install this equipment in
a confined space such as a bookcase or
similar unit.
The main label is attached on the exterior of
the bottom of the apparatus.
2
You can find the serial number on the bottom of the unit.
This number is unique to this unit and not available to
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Serial No. ______________________________
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS 2.0” are trademarks of Digital
Theater Systems, Inc.
Gracenote® End User License Agreement
Version 20061005
This application or device contains software from Gracenote, Inc. of Emeryville, California (“Gracenote”).
The software from Gracenote (the “Gracenote Software”) enables this application to perform disc and/or file
identification and obtain music-related information, including name, artist, track, and title information (“Gracenote
Data”) from online servers or embedded databases (collectively, “Gracenote Servers”) and to perform other
functions. You may use Gracenote Data only by means of the intended End-User functions of this application or
device.
You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers for your own
personal non-commercial use only. You agree not to assign, copy, transfer or transmit the Gracenote Software
or any Gracenote Data to any third party. YOU AGREE NOT TO USE OR EXPLOIT GRACENOTE DATA, THE
GRACENOTE SOFTWARE, OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY PERMITTED HEREIN.
You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software, and Gracenote
Servers will terminate if you violate these restrictions. If your license terminates, you agree to cease any and all
use of the Gracenote Data, the Gracenote Software, and Gracenote Servers. Gracenote reserves all rights in
Gracenote Data, the Gracenote Software, and the Gracenote Servers, including all ownership rights. Under no
circumstances will Gracenote become liable for any payment to you for any information that you provide.
You agree that Gracenote, Inc. may enforce its rights under this Agreement against you directly in its own name.
The Gracenote service uses a unique identifier to track queries for statistical purposes.
The purpose of a randomly assigned numeric identifier is to allow the Gracenote service to count queries without
knowing anything about who you are. For more information, see the web page for the Gracenote Privacy Policy
for the Gracenote service.
The Gracenote Software and each item of Gracenote Data are licensed to you “AS IS.” Gracenote makes no
representations or warranties, express or implied, regarding the accuracy of any Gracenote Data from in the
Gracenote Servers. Gracenote reserves the right to delete data from the Gracenote Servers or to change data
categories for any cause that Gracenote deems sufficient. No warranty is made that the Gracenote Software or
Gracenote Servers are error-free or that functioning of Gracenote Software or Gracenote Servers will be
uninterrupted. Gracenote is not obligated to provide you with new enhanced or additional data types or
categories that Gracenote may provide in the future and is free to discontinue its services at any time.
GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND
NON-INFRINGEMENT. GRACENOTE DOES NOT WARRANT THE RESULTS THAT WILL BE OBTAINED BY
YOUR USE OF THE GRACENOTE SOFTWARE OR ANY GRACENOTE SERVER. IN NO CASE WILL
GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST
PROFITS OR LOST REVENUES.
© Gracenote 2006
3
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-10
Symbol Used in this Manual . . . . . . . . . . . . . . . .5
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .5
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . .6
Regional Code . . . . . . . . . . . . . . . . . . . . . . . . . .6
Availability of copying feature . . . . . . . . . . . . . . .6
About the internal hard disk drive . . . . . . . . . . . .7
Playing media files using the USB feature . . . . . .7
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Active Subwoofer . . . . . . . . . . . . . . . . . . . . . . . .9
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .10
Remote Control Operation . . . . . . . . . . . . . . . .10
Hookup and Settings . . . . . . . . . . . . . . . . . . . .11-17
Making system connections . . . . . . . . . . . . .11-12
HDMI connection . . . . . . . . . . . . . . . . . . . . . . .13
Using the Home Menu . . . . . . . . . . . . . . . . . . .14
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . .14
General Settings . . . . . . . . . . . . . . . . . . . . . . . .14
TV Aspect . . . . . . . . . . . . . . . . . . . . . . . . . .14
Display Mode . . . . . . . . . . . . . . . . . . . . . . .14
PBC (Version 2.0) . . . . . . . . . . . . . . . . . . . .15
Initialization . . . . . . . . . . . . . . . . . . . . . . . . .15
Language Settings . . . . . . . . . . . . . . . . . . . . . .15
Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . .15
DRC (Dynamic Range Control) . . . . . . . . . .15
Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
HD AV Sync . . . . . . . . . . . . . . . . . . . . . . . .15
2.1 Speaker Setup . . . . . . . . . . . . . . . . . . .15
Lock (Parental Control) Settings . . . . . . . . . . . .16
Set Password / Rating / Area Code . . . . . . .16
DivX Registration Code . . . . . . . . . . . . . . .16
Displaying Disc Information on-screen . . . . . . .17
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-30
General Playback Features . . . . . . . . . . . . .18-20
Playing a DivX Movie File . . . . . . . . . . . . . . . . .21
Playing an Audio CD or MP3/WMA file . . . . .22-23
Identifying the audio CD tracks or the stored
music files in the hard disk . . . . . . . . . . . . . . . .24
Program Playback with Audio CD and
MP3/WMA file . . . . . . . . . . . . . . . . . . . . . . . . . .25
Viewing a JPEG File . . . . . . . . . . . . . . . . . .26-27
Editing a MP3/WMA, JPEG, DivX file . . . . . .28-29
AUX/MOBILE/OPTICAL (Listening to an
external source) . . . . . . . . . . . . . . . . . . . . . . . .30
Using Apple iPod . . . . . . . . . . . . . . . . . . . . . . .30
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-32
Ripping CDs (for audio CDs) . . . . . . . . . . . . . . .31
To find your ripped tracks . . . . . . . . . . . . . . . . .31
Recording from radio . . . . . . . . . . . . . . . . . . . .31
Timeshift . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
4
Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-37
Additional Information . . . . . . . . . . . . . . . . . . . .33
Presetting the Radio Stations . . . . . . . . . . .33
Listening to the Radio . . . . . . . . . . . . . . . . .33
Sleep . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
XTS pro . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Virtual sound . . . . . . . . . . . . . . . . . . . . . . . .34
Controlling Your TV with the Supplied Remote
Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Language Codes . . . . . . . . . . . . . . . . . . . . . . .35
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .36
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .37
Copyright
Recording equipment should be used only for lawful
copying and you are advised to check carefully what
is lawful copying in the area in which you are
making a copy. Copying of copyright material such
as films or music is unlawful unless permitted by a
legal exception or consented to by the rights owner.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only, unless otherwise
authorized by Macrovision corporation. Reverse
engineering or disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 625 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
THE ‘STANDARD DEFINITION’ OUTPUT. IF
THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL 625p
HDD/DVD RECORDER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
To ensure proper use of this product, please read this
owner’s manual carefully and retain for future
reference.
This manual provides information on the operation
and maintenance of your unit. Should the unit require
service, contact an authorized service location.
Symbol Used in this Manual
The lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk of
electric shock.
About the
Introduction
Introduction
Symbol Display
“
” may appear on your TV display during
operation and indicates that the function explained in
this owner’s manual is not available on that specific
media.
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
The exclamation point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Note:
Indicates special notes and operating features.
Tip:
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols
are applicable only to the disc represented by the
symbol.
ALL
DVD
VCD
ACD
DivX
MP3
WMA
JPEG
All discs and file listed below
DVD and finalized DVD±R/RW
Video CDs
Audio CDs
DivX files
MP3 files
WMA files
JPEG files
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Recording
Indicates hazards likely to cause harm to the
unit itself or other material damage.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
Moisture Condensation
Never operate this product immediately after
moving it from a cold location to a warm location.
Leave it for two or three hours without operating it.
If you use this product in such a situation, it may
damage discs and internal parts.
5
Playable Discs
DVD (8 cm / 12 cm disc)
Discs such as movies that can be purchased or rented
Video CD (VCD) (8 cm / 12 cm disc)
VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format
Audio CD (8 cm / 12 cm disc)
Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased
CD-R/CD-RW (8 cm / 12 cm disc)
CD-R/CD-RW discs that contain audio titles, DivX, MP3, WMA, or JPEG files.
Notes:
– Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some
CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.
– Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
– Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.
– Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW) may
not be playable.
– DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Unit may
not play if the disc is damaged or dirty, or if there is dirt or condensation on the Unit’s lens.
– If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in
which it may not play because of the settings of the application software used to create the disc. (Check with
the software publisher for more detailed information.)
– This unit requires discs and recordings to meet certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types
of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain preexisting conditions (see above) to ensure compatible playback.
– Customers should note that permission is required in order to download MP3 / WMA files and music from the
Internet. Our company has no right to grant such permission. Permission should always be sought from the
copyright owner.
Regional Code
This unit has a regional code printed on the bottom of the unit. This unit can play only DVD discs labeled same
as the bottom of the unit or “ALL”.
Notes on Regional Codes
Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must
match your unit’s regional code or the disc cannot play.
If you try to play a DVD with a different regional code from the unit, the message “Incorrect region code.
Can’t play back” appears on the TV screen.
Availability of copying feature
From
To
MP3/WMA
JPEG
DivX
Audio CD
Video CD
HDD
DISC
No
No
No
No
No
HDD
USB device
No
No
No
No
No
DISC
HDD
Yes
Yes
Yes
No*
No
DISC
USB device
USB device
USB device
DISC
HDD
No
No
Yes
No
No
Yes
No
No
Yes
No
No
No
No
No
No
* You can rip Audio CD tracks to the hard disk.
6
Playing media files using the
USB feature
The internal hard disk drive (HDD) is a fragile piece of
equipment. Please use the unit following the
guidelines below to protect against possible HDD
failure.
We recommend that you back up your important
recordings onto DVD discs in order to protect against
accidental loss.
You can enjoy the media files such as pictures
(JPEG), movies (DivX) and tunes (MP3/WMA) saved
in an MP3 player or USB memory by connecting the
storage device to the USB port of this unit.
1. Connect the USB device to the USB port of the
unit.
2. Press HOME on the remote control.
Do not move the unit while it is on.
Install and use the unit on a stable, level surface.
Do not block the rear vent/cooling fan.
Do not use the unit in excessively hot or humid
places, or in places that may be subject to sudden
changes in temperature. Sudden changes in
temperature can cause condensation to form inside
the unit. This can be a cause of HDD failure.
Compatible Devices
While the unit is switched on, do not unplug from
the wall socket or switch the electricity off from the
breaker switch.
2. MP3 Player: Flash type MP3 player.
Do not move the unit immediately after switching it
off. If you need to move the unit, please follow the
steps below:
3. USB Flash Drive: Devices that support USB2.0 or
USB1.1.
1. After the message POWER OFF is shown in the
display, wait at least two minutes.
Notes:
2. Unplug from the wall socket.
3. Select [MUSIC], [PHOTO] or [MOVIE] option.
Details for the options are on page 14.
1. Devices which require additional program
installation when you have connected it to a
computer, are not supported.
• The MP3 player requiring installation of a driver
is not supported.
3. Move the unit.
If there’s a power failure while the unit is on there is
a chance that some data on the HDD will be lost.
The HDD is very delicate. If used improperly or in
an unsuitable environment, it is possible that the
HDD will fail after a few years of use. Signs of
problems include playback unexpectedly freezing
and noticeable block noise (mosaic) in the picture.
However, sometimes there will be no warning signs
of HDD failure.
If the HDD fails, no playback of recorded material
will be possible. In this case it will be necessary to
replace the HDD unit.
Do not extract the USB device in operating (play,
copy, move, etc.).
A back up demands to prevent a data damage.
If you use a USB extension cable or USB hub, the
USB device might not be recognized.
This unit can support USB 2.0 or USB 1.1.
A device using NTFS file system is not supported.
(Only FAT (16/32) file system is supported.)
The USB function of this unit does not support all
USB devices.
Digital camera and mobile phone are not supported.
This unit is not supported when the total number of
files is 1000 or more.
Recording
Introduction
About the internal hard disk
drive
7
Main Unit
a
b
a HDMI Connector (Type A)
HDMI output providing a high quality interface for
digital audio and video.
b SYSTEM Connector
Connect the main unit to the active subwoofer.
c Display window
d * Touch pad
You can point to, select, and scroll objects on the
display window.
You can also change the volume by moving your
finger around the touch wheel.
e PHONES
3.5 mm headphone jack.
c
Tips:
Adjust the volume to a moderate level before
you plug in the headphones.
Connecting headphones will switch off the
speakers.
d
f USB
Connect to a USB port of multimedia (USB
memory etc.)
g 1/I
Switches the unit ON or OFF.
e
f
h Remote Sensor
Point the unit remote control here.
i HOME
Accesses or removes the HOME menu.
j PLAY
Starts playback
k STOP
Stops playback or recording.
l REC
Starts recording.
m CD slot loader
gh i jkl
m
n
Notes:
Do not push a disc forcibly into the CD slot.
Do not pull or push a disc while a disc is ejected.
Press EJECT again to reinsert the disc after
ejecting it.
n EJECT
Ejects or inserts a disc from the slot loader.
8
Introduction
* Touch pad
This unit has touch sensitive controls that respond to the touch of your fingers.
Notes:
Do not place objects on the top panel of the main unit.
Do not touch the touch pad hard to make it work.
Slowly and lightly touch the touch pad.
Touch the touch pad with bare hands and do not touch the touch pad with wet hands.
Action
Function
Move your finger around
the touch wheel
Tap ENTER
Tap
Adjust the volume
Select a menu item
Move up, down, left, or
right
Active Subwoofer
p
qr s
o
SYSTEM(DVDP)
,
,
, or
t
MOBILE
w
x
u
Recording
Description
v
o AC Power Cord
Plug into the power source.
v COMPONENT VIDEO OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
p AUX IN
Connect an auxiliary audio input source.
w FM ANTENNA
Connect the FM antenna to this terminal.
q OPTICAL IN
Connect an optical output of digital device.
x AM ANTENNA
Connect the AM antenna to this terminal.
r VIDEO OUT
Connect to a Video Input on TV.
s SYSTEM (DVDP)
Connect the active subwoofer to the main unit.
t MOBILE
Connect an external device (e.g. Portable audio
devices)
u FRONT SPEAKER (4Ω)
A speaker system can be connected to this
terminal.
9
Remote Control
a
b
c
d
e
f
a TUNER: Selects an FM or AM
broadcast.
HDD: Selects an HDD mode.
MOBILE: Selects a MOBILE
mode.
POWER: Switches the unit ON or
OFF.
DIMMER: Press to change
brightness of the display window
on the top panel during power-on
status.
SLEEP: Set the system to turn off
automatically at a specified time.
EJECT: Ejects or inserts disc from
the slot loader.
DISC: Selects a DISC mode.
USB: Selects an USB mode.
b REPEAT: Repeat chapter, track,
title or all.
A-B: Repeats sequence between
two points (A and B)
MARKER: Marks any point during
playback.
SEARCH: Displays Marker Search
menu.
TITLE: Displays the disc’s Title
menu, if available.
ZOOM: Enlarges video image.
AUDIO: Selects an audio
language or audio channel.
Selects STEREO or MONO
(Radio).
SUBTITLE: Selects a subtitle
language.
c x (STOP): Stops playback or
recording.
B (PLAY): Starts playback.
X (PAUSE) : Pause playback
temporarily.
z (REC): Starts recording.
m / M (SCAN): Search
backward or forward.
. / > (SKIP): Go to next or
previous chapter or track.
d DISPLAY: Accesses On-Screen
Display.
MENU/LIST: Accesses menu on a
DVD disc.
HOME: Accesses or removes the
HOME menu.
PLAYLIST: Displays playlists of
HDD Music List.
Remote Control Operation
Point the Remote Control at the remote sensor and
press the buttons.
10
RETURN (O): Removes the
menu.
PRESET(+/-): Select programme
of Radio.
TUN.(+/-): Tunes in the desired
radio station.
b / B / v / V (left/right/up/down):
Selects an option in the menu.
ENTER: Confirms menu
selections.
VSM: Selects the virtual sound.
XTS Pro: To enjoy more natural
and realistic sound.
CLEAR: Removes a mark on the
Marker Search menu.
MUTE: Turns the sound on and off
temporarily.
VOLUME (+/-): Adjusts speaker
volume.
e 0-9 numerical buttons: Selects
numbered options in a menu.
PROG./CLEAR: Accesses or
removes program menu.
Stores a radio station’s frequency
in the tuner’s memory.
SMART. MIX: Creates playlists of
certain genre of music.
f TIMESHIFT: Activates pause live
radio/playback (timeshift) for a live
radio program.
RESOLUTION: Sets the output
resolution for HDMI.
TV Control Buttons: See page
34.
Remote Control Battery Installation
Remove the battery cover on the
rear of the Remote Control, and
insert two (size AA) batteries with
and
matched correctly.
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
Hookup and Settings
Making system connections
Caution
Do not plug the active subwoofer into an AC
power(mains) outlet until all the components are
connected.
2. Connect the L (left) speaker cable (S2) into the
rear jack of the left speaker. Connect the R (right)
speaker cable (S2) into the rear jack of the right
speaker.
L (left) speaker
R (right) speaker
Connect one end of the system cable (S1) into the
SYSTEM jack on the rear of the unit. Connect the
other end of the system cable (S1) into the SYSTEM
(DVDP) jack on the rear of the active subwoofer.
Tighten both screws on the connector.
Note:
The jacks for the system cable are keyed so that the
cable connectors only connect in one way.
Hookup and
Settings
Connecting the active subwoofer to the unit
L (left)
speaker
cable
R (right)
speaker
cable
S2
Note:
Make sure cable connectors are fully inserted and
seated firmly in the speaker jacks.
Connecting the supplied antennas
Rear of unit
The rear of the active subwoofer provides jacks for
the AM and FM antennas included with your system.
Rear of active
subwoofer
SYSTEM(DVDP)
S1
R
MOBILE
Note:
An outdoor antenna may be used in place of the
supplied indoor antennas. To add an outdoor antenna,
consult a qualified installer.
Follow all safety instructions supplied with the
antenna.
L
AM Loop Antenna
(supplied)
1. Connect one end of the speaker cable (S2) into
the FRONT SPEAKER (4Ω) jack on the rear of the
active subwoofer. Tighten both screws on the
connector.
FM Wire antenna
(supplied)
Rear of active
subwoofer
SYSTEM(DVDP)
R
Recording
Connecting the speakers to the active
subwoofer
MOBILE
L
FM antenna
Rear of the active subwoofer
SYSTEM(DVDP)
R
L
MOBILE
Connect the FM antenna into the FM jack on the rear
of the active subwoofer. Spread out the antenna arms
and move them around to establish optimum FM
reception. Extend the antenna as far from the unit and
other equipment as possible.
AM antenna
S2
Connect the AM loop antenna into the AM jack on the
rear of the active subwoofer. Place the antenna loop
away from the unit and other equipment as
possible.Stand it on the supplied base or mount it to a
wall.
11
Connecting Your TV to the active subwoofer
Portable audio
Digital Device
devices
OPTICAL
Headphones or
Line out jack
OUT
Rear of active
subwoofer
O
M
Optical digital connection
Connect an optical output of digital device into the
OPTICAL IN jack on the rear of the active subwoofer
using optical cable (O).
Caution
When you use HDMI connection, the VIDEO OUT
connections are not available.
Connecting an additional appliance
There are two options for connecting an additional
appliance to the unit.
SYSTEM(DVDP)
MOBILE
R
L
Option A: AUX IN (L/R) jacks (e.g. VCR, Laser disc
player)
Option B: MOBILE jack (e.g. Portable audio
devices)
Option A: AUX IN (L/R) jacks
C
V
1. Connect the red plug of the red/white audio cables
to the red jack AUX IN R and white plug to the
white jack AUX IN L.
2. Connect the other end of the audio cables to audio
output jacks of the additional appliance.
Note:
If the connected device has only a single audio output
jack, connect it to the AUX IN L jack.
Rear of TV
Video connection
Connect the VIDEO OUT jack on the rear of the active
subwoofer into the video input jack on your TV using
the video cable (V).
Component video connection
Connect the COMPONENT VIDEO OUT jacks on the
rear of the active subwoofer into the corresponding
input jacks on your TV using a component video cable
(C). If your television is a high-definition or “digital
ready” television, you may take advantage of the
unit’s progressive scan output for the highest video
resolution possible. If your TV does not accept the
progressive scan format, the picture will appear
scrambled if you try progressive scan on the unit.
Set the resolution to 576P using RESOLUTION button
for progressive signal.
Note:
Progressive scan does not work with the analog video
connection (yellow VIDEO OUT jack).
12
Option B: MOBILE jack
1. Connect one end of an audio cable (M) with a 3.5
millimeter stereo miniplug into the MOBILE jack on
the rear of the active subwoofer.
2. Connect the other end of an audio cable (M) with a
3.5 millimeter stereo miniplug into the headphone
jack (or line out jack) of the additional appliance.
HDMI connection
Rear of the unit
If you have a HDMI TV or monitor, you can connect it
to this unit using a HDMI cable.
1. Connect the HDMI jack on the unit to the HDMI
jack on a HDMI compatible TV or monitor (H).
2. Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
Notes:
H
HDMI compatible TV
The arrow on the cable connector body should face
up for correct alignment with the connector on the
unit.
Hookup and
Settings
HDMI
About HDMI
If there is noise or lines on the screen, please check
the HDMI cable.
If you press RESOLUTION in tuner (RADIO) mode,
the resolution is not changed.
Tip :
When you use HDMI connection, you can change the
resolution (576p, 720p, or 1080i) for the HDMI output
using RESOLUTION button.
Caution
Changing the resolution when the unit is connected
with HDMI connector may result in malfunctions.
To solve the problem, turn off the unit and then turn it
on again.
HDMI has the capability to support standard, enhanced,
or high-definition video plus standard to multi-channel
surround-sound audio, HDMI features include
uncompressed digital video, a bandwidth of up to 5
gigabytes per second, one connector (instead of several
cables and connectors), and communication between the
AV source and AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
Recording
(Type A)
HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for
use with DVD Players, Set-Top Boxes, and other AV
devices.
HDMI was developed to provide the technologies of
HDCP (High Definition Contents Protection). HDCP is
used to protect digital content transmitted and
received.
Additional Information for HDMI
When you connect a HDMI or DVI compatible
device make sure of the followings:
- Try switching off the HDMI/DVI device and this
unit. Next, switch on the HDMI/DVI device and
leave it for around 30 seconds, then switch on
this unit.
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720x576p, 1280x720p, or 1920x1080i video input.
Not all HDCP-compatible DVI devices will work with
this unit.
- The picture will not be displayed properly with
non-HDCP device.
- When the connected TV cannot accept the
resolution you selected, you may not see normal
picture on the TV screen.
13
Using the Home Menu
From the Home Menu screen you can access all the
Media for playback and recording of the unit.
1. Press HOME to display the Home Menu screen.
2. Use the b / B buttons to select a main option you
want. Sub options appears.
3. Use the v / V and ENTER buttons to select the
sub option you want.
4. To exit the HOME menu, press HOME.
MOVIE
HDD Divx: Displays the [Movie List] menu for HDD.
(See page 21)
DISC:
- Displays [Movie List] menu for DivX disc.
(See page 21)
- Plays back Video CD or DVD-Video disc.
(See page 18-20)
USB Divx: Displays the [Movie List] for USB device.
(See page 21)
General Operation
1. Select SETUP and press ENTER
2. Use v / V to select the desired option.
3. While the desired item is selected, press B to
move to the second level.
4. Use v / V to select the second desired option.
5. Press B to move to the third level.
6. Use v / V to select the desired setting then press
ENTER to confirm your selection.
Some items require additional steps.
7. Press RETURN (O) to exit the Setup menu.
Note:
Press b to go back to the previous level.
General Settings
PHOTO (See page 26-27)
HDD: Displays [Photo List] menu for HDD.
DISC: Displays [Photo List] menu for disc.
USB: Displays the [Photo List] for USB device.
SETUP (See page 14)
Start: Displays Setup menu.
Easy Menu
CD Ripping: Rips Audio CD tracks into the hard
disk. (See page 31)
AUX: Selects an auxiliary mode. (See page 30)
OPTICAL: Selects OPTICAL mode. (See page 30)
RADIO
Listen: Selects a Radio mode.
MUSIC (See page 22-25)
HDD: Displays [Music List] menu for HDD.
DISC: Displays [Music List] (or Audio CD) menu for
disc.
USB: Displays the [Music List] for USB device.
Initial Settings
In this menu system, there are several ways to
customize the settings provided. Most menus consist
of three levels to set up the options, but some require
greater depth for the variety of settings.
14
TV Aspect
Selects the aspect ratio of the connected TV (4:3
standard or wide).
[4:3] Select this when connecting to a 4:3 screen
TV. When you select [4:3], set [Display Mode]
below.
[16:9] Select this when connecting to a wide-screen
TV or TV with a wide mode function.
Display Mode
Selects how to display a wide picture on the screen
when [4:3] is selected in [TV Aspect].
[Letter Box] Displays a wide picture with bands on
the upper and lower portions of the screen.
[Pan Scan] Automatically displays a wide picture on
the entire screen and cuts off the portions that do
not fit.
Note:
When you set the resolution to 720p or 1080i, TV
Aspect and Display Mode are disabled.
PBC (Version 2.0)
Audio Settings
PBC stands for Playback Control and refers to special
menus and navigation features that are available on
some Video CDs.
[ON] Video CDs are played according to the PBC, if
available.
[OFF] Video CDs are played the same way as Audio
CDs.
Initialization
[HDD format] Initializes the HDD (Hard Disk Drive):
everything recorded on the HDD will be erased.
1. Select [Initialization] option then press B.
2. Press v / V to select the desired option then press
ENTER.
The confirm message will appear.
3. Use b / B to select [Ok] or [Cancel] then press
ENTER.
Language Settings
DRC (Dynamic Range Control)
Hookup and
Settings
You can reset the unit to its original factory settings
and initialize the HDD.
[Factory Set] If you need to, you can reset the unit
to all its factory settings. Some options cannot be
reset. (Rating, Password, and Area Code)
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Then, you may listen to a movie at a lower volume
without losing clarity of sound. Set DRC to [ON] for
this effect.
Vocal
Set Vocal to [ON] only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
HD AV Sync
Display Menu
Select a language for the Setup menu and on-screen
display.
Disc Menu/Audio/Subtitle
[Original]Refers to the original language in which
the disc was recorded.
[Others] To select another language, press number
buttons then ENTER to enter the corresponding
4-digit number according to the language code list
in the reference chapter (see page 35). If you enter
the wrong language code, press b.
[OFF](for Disc Subtitle) : Turn off Subtitle.
Recording
When using Digital TV;
Sometimes AV signal could not be transmitted
simultaneously because of later transmission of video
signal compared to audio signal.
Because it takes some time to convert analog video
signal to digital one in the Digital TV.
And it means that you may not enjoy picture on the
screen and sound from speaker at the same time
even though it is one scene.
In the HD AV Sync menu, you could adjust delay time
to audio signal for simultaneous AV signal
transmission
Delay time could be set up with 10msec unit.
(0 ~ 300msec)
Delay time is different with each TV Brand. So you
need to adjust optimal delay time complying with
your TV.
2.1 Speaker Setup
Make the following settings for the built-in 2.1 channel
surround decoder.
1. Select [2.1 Speaker Setup] option then press B.
2. Press B to select a speaker that you want to
adjust.
(L: Left speaker/R: Right speaker/W: Active subwoofer)
3. Press v / V to adjust the output level of the
selected speaker.
4. Press ENTER to store the setting.
15
Lock (Parental Control) Settings
Note:
If you set a rating for the unit, all disc scenes with the
same rating or lower are played. Higher rated scenes
are not played unless an alternate scene is available
on the disc. The alternative must have the same rating
or a lower one. If no suitable alternative is found,
playback stops. You must enter the 4-digit password
or change the rating level in order to play the disc.
Area Code
Enter the code of an area whose standards were used
to rate the DVD video disc, referring to the list (See
“Area Codes”, page 35.).
Set Password
1. Select [Set Password] option then press B.
2. To access the Rating, Password and Area Code
features, you must input the 4-digit password you
created.
If you have not yet entered a password you are
prompted to do so. Input a 4-digit password and
press ENTER. Enter it again and press ENTER to
verify. If you make a mistake before pressing
ENTER, press b.
To change the password, select the [Change],
press ENTER and input the old 4-digit password.
And input the new 4-digit password then press
ENTER. Input it again to verify.
To delete the password, select [Delete] then press
ENTER.
Input the 4-digit password you created and press
ENTER.
If you forget your 4-digit password
If you forget your password, to clear the current
password, follow the procedure below.
1. Display Setup menu then select an 1 level icon.
2. Use the Number buttons to enter the 6-digit
number “210499”.
3. Select [Yes] then press ENTER. The 4-digit
password is cleared. Enter a new password.
Rating
Blocks playback of rated DVDs based on their
content. Not all discs are rated.
1. Select [Rating] option then press B.
2. Follow step 2 as shown “Set Password”.
3. Select a rating using the v / V buttons.
[1] - [8]: Rating one (1) has the most restrictions
and rating eight (8) is the least restrictive.
[No Limit]: If you select [No Limit], parental control
is not active and the disc plays in full.
4. Press ENTER to confirm your rating selection.
16
1. Select [Area Code] option then press B.
2. Follow step 2 as shown “Set Password”.
3. Select the first character using the v / V
buttons.
4. Shift the cursor using B buttons and select the
second character using v / V buttons.
5. Press ENTER to confirm your area code selection.
DivX Registration Code
We provide you the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX® VOD service. For more
information, visit www.divx.com/vod.
1. Select [DivX(R) VOD] option then press B.
2. Press ENTER and the registration code will
appear.
3. Use the registration code to purchase or rent the
videos from Divx® VOD service at
www.divx.com/vod. Follow the instructions and
download the video onto a disc for playback on
this unit.
Note:
All the downloaded videos from DivX® VOD can only
be played back on this unit.
Displaying Disc Information
on-screen
You can display various information about the disc
loaded on-screen.
Hookup and
Settings
1. Press DISPLAY to show various playback
information.
The items displayed differ depending on the disc
type or playing status.
2. You can select an item by pressing v / V and
change or select the setting by pressing b / B.
For details about each item, see the pages in
parentheses.
[Title]: Current title (or track) number/total
number of titles (or tracks)
[Chapter]: Current chapter number/total number
of chapters.
[Time]: Elapsed playing time (See page 20)
[Audio]: Selected audio language (DVD VIDEO
only) or audio channel (See page 19)
[Subtitle]: Selected subtitle (See page 19)
[Angle]: Selected angle/total number of angles
(See page 20)
[Sound]: Selected sound mode (See page 20)
Recording
Note:
If no button is pressed for 10 seconds, the on-screen
display disappears.
17
Playback
General Playback Features
1. Insert your chosen disc into CD loader, with the playback side down.
2. Starts playback using HOME menu (see page 14).
3. To stop the playback, press x (STOP).
The unit records the stopped point, depending on the disc. “Xx” appears on the screen briefly.
Press B (PLAY) to resume playback (from the scene point). If you press x (STOP) again or eject the disc
(“x” appears on the screen.), the unit will clear the stopped point.
4. Press EJECT to remove the disc.
Note:
If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be
entered and/or the disc must be authorized (see “Rating”, on page 16).
Buttons
Operations
EJECT
Ejects or inserts a disc.
X (PAUSE)
During playback, press X to pause playback.
ALL
Press X repeatedly to play Frame-by-Frame.
DVD
. / > (SKIP)
During playback, press . or > to return to the
beginning of the current chapter/track or to go to the next
chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
Tips:
To go directly to any chapter during DVD playback, press
DISPLAY and press v / V to select the chapter icon.
Then, input the chapter number or use b / B.
On an Audio CD, to go directly to any track, enter the
track number using the numbered buttons (0-9) during
playback.
ALL
m / M (SCAN)
During playback, press m or M repeatedly to select the
required scan speed.
DVD, DivX ; 4 steps
Video CD, Audio CD; 3 steps
DVD
ACD
VCD
DivX
While the playback is paused, press m or M repeatedly
to play in slow motion.
DVD; 4 steps
DivX; 4 steps (Forward only)
Video CD; 3 steps (Forward only)
DVD
VCD
DivX
During playback or pause mode, press ZOOM to enlarge
the video image.
(x1 size → x2 size → x4 size → x1 size (normal size)
You can move through the zoomed picture using b B v V
buttons.
DVD
VCD
ZOOM
18
Discs
ALL
VCD
DivX
General Playback Features (Continued)
Buttons
Operations
REPEAT
During playback, press REPEAT repeatedly to select a
desired repeat mode.
DVD (Title/Chapter/Off)
Video CD, DivX (Title/ALL/Off)
Audio CD, MP3/WMA (TRACK/ALL/(OFF))
Notes:
On a Video CD with PBC, you must set PBC to [OFF] in the
Setup menu to use the Repeat function. See page 15.
If you press > once during Repeat Chapter (Track)
playback, the repeat playback cancels.
DVD
MP3
VCD
WMA
A-B
During playback, each press of A-B button to select point A
and point B and repeats a sequence from point A (Starting
point) to point B (End point).
DVD
MP3
VCD
WMA
TITLE
If the current DVD title has a menu, the title menu appears
on the screen. Otherwise, the disc menu may appears.
DVD
MENU/LIST
The disc menu appears on the screen.
DVD
During playback, press SUBTITLE (
) then press b / B
repeatedly to select a desired subtitle language.
DVD
DivX
Press AUDIO (
) then press b / B repeatedly to hear a
different audio language or audio track.
DVD
DivX
Press AUDIO (
) then press b / B repeatedly during
playback to hear a different audio channel (STEREO, LEFT
or RIGHT).
VCD
)
ACD
DivX
Playback
AUDIO (
)
ACD
DivX
Recording
SUBTITLE (
Discs
19
If a menu screen is displayed DVD
VCD
The menu screen may be displayed first after loading a
DVD or Video CD which contains a menu.
DVD
Use the b / B / v / V buttons to select the
title/chapter you want to view, then press ENTER to
start playback.
Press TITLE or MENU/LIST to return to the menu
screen.
VCD
Use the number buttons to select the track you want
to view.
Press RETURN (O) to return to the menu screen.
Menu setting and the exact operating procedures
for using the menu may differ depending on the
disc. Follow the instructions on the each menu
screen. You may also set PBC to [OFF] under
Setup menu (see page 15).
Moving to another TITLE DVD DivX VCD
When a disc has more than one title, you can move to
another title as follows:
Press DISPLAY during playback then use
v / V to select the title icon. Then, press the
appropriate numbered button (0-9) or b / B to
select a title number.
Note:
On a Video CD with PBC, you must set PBC to OFF
in the Setup menu. See page 15
Time Search DVD DivX VCD
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback. The time search
box shows the elapsed playing time.
2. Press v / V to select the time icon and “--:--:--”
appears.
3. Input the required start time in hours, minutes, and
seconds from left to right.
4. Press ENTER to confirm. Playback starts from the
selected time.
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
2. Within 5 seconds, press b / B to select a marker
number that you want to recall or clear.
3. Press ENTER and playback starts from the
marked scene. Or, press CLEAR and the marker
number is erased from the list.
Camera Angle DVD
If the disc contains scenes recorded at different
camera angles, you can change to a different camera
angle during playback.
1. Press DISPLAY during playback.
The On-Screen Display appears on the TV screen.
2. Use v / V to select the Angle icon in the OnScreen Display.
3. Use b / B to select a desired angle.
The number of the current angle appears on the
TV screen.
Virtual Surround DVD DivX
This unit can produce a Virtual Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multichannel audio from a home theater system.
1. Press DISPLAY during playback. The On-Screen
Display appears on the TV screen.
2. Use v / V to select the Sound icon in the
On-Screen Display.
3. Use b / B to select “VIRTUAL”.
To turn off the 3D Surround effect, select “Normal”.
You can also set the Virtual Surround by pressing
VSM repeatedly.
Last Condition Memory DVD
VCD
Note:
On a Video CD with PBC, you must set PBC to OFF
in the Setup menu. See page 15
This unit memorizes the user settings for the last disc
that you have viewed. Settings remain in memory
even if you remove the disc from the unit. If you load
a disc that had its settings memorized, the latest stop
position is automatically recalled.
Marker Search DVD
Note:
Settings are stored in memory for use any time.
VCD
DivX
To enter a Marker
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc during playback. The Marker
icon appears on the TV screen briefly. Repeat to enter
up to nine markers.
20
To Recall or Clear a Marked Scene
Playing a DivX Movie File
The unit can play Divx files. Before playing DivX files,
read “DivX file requirement” on right.
1. Press HOME then select [MOVIE] option.
2. Select a media that contains DivX file(s) then
press ENTER.
The [Movie List] menu appears on the TV screen.
[Delete] Deletes the file(s) or folder(s) from the
media.
[Rename] Edits the file name. (page 28)
[Move] Moves the file(s) to another folder or
media. (page 29)
[Copy] Copies the file(s) to another folder or
media. (page 29)
Open
HDD DivX
Play
Edit
Copy
Delete
Move
Rename
Open
DISC
Play
Edit
Copy
Delete
Move
5. Press x (STOP) to stop the playback. The [Movie
List] menu appears.
Notice for displaying the DivX subtitle
If the subtitle does not display properly, please follow
the steps below.
1. Press X when the subtitle appears.
2. Press and hold SUBTITLE about 5 seconds.
The language code will appear.
3. Press SUBTITLE to select another language code
until the subtitle is displayed properly.
4. Press B (PLAY) to continue playback.
Movie List menu options
1. Press v / V to select a folder/file on the [Movie
List] menu then press ENTER.
[Movie List] menu options appear.
The menu options displayed differ depending on
the selected media.
2. Press v / V / b / B to select an option, and press
ENTER.
[Play] Start playback the selected title.
[Open] Opens the folder and a list of files in the
folder appears.
Open
USB DivX
Play
Edit
Copy
Delete
Playback
4. If you want to view a divx movie file, press v / V
to highlight a file and press B (PLAY).
You can use variable playback functions.
Refer to pages 18-20.
Rename
Move
Rename
: Disabled
DivX file requirement
Available resolution size: 720x576 (W x H) pixel
DivX file extensions: “.avi”, “.divx”
Playable DivX subtitle: “.smi”, “.srt”, “.ssa”,
“.sub (Micro DVD format)”,
“.txt (Micro DVD format)”
Playable Codec format: “DIV3”, “DIVX”, “DX40”,
“DX50”, “3ivx”, “MP4V2”, “MP4V3”
Playable Audio format: “AC3”, “PCM”, “MP3”,
“DTS”
Sampling frequency:
within 16 - 48 kHz (MP3)
Bit rate:
within 32 - 320kbps (MP3)
CD-R Format: ISO 9660 and JOLIET.
DVD±R/RW Format: ISO 9660 (UDF Bridge format)
Maximum Files/Disc: Less than 999 (total number
of files and folders)
Notes on DivX format
If the number of the screen frame is over 29.97
frames per second, this unit may not operate
normally.
If the video and audio structure of recorded file is
not interleaved, returns to the menu screen.
Recording
3. Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons on the remote to highlight
and
press ENTER.
21
Playing an Audio CD or
MP3/WMA file
The unit can play audio CDs and MP3/WMA files. Before
playing MP3/WMA files, read “MP3/WMA audio file
requirement” on page 23.
The Gracenote® music recognition service enables your
unit to look up from its built-in database the CD track
information (including album, artist, track information). It
allows the ripped CD tracks to be properly categorized
(for example, under Artist, Album or Song List) and also
stored with the existing files in the hard disk.
Music recognition technology and related
data are provided by Gracenote®.
Gracenote is the industry standard in music recognition
technology and related content delivery. For more
information, visit www.gracenote.com.
CD and music-related data from Gracenote, Inc.,
copyright © 2000-2006 Gracenote. Gracenote Software,
copyright © 2000-2006 Gracenote. This product and
service may practice one or more of the following U.S.
Patents: #5,987,525; #6,061,680; #6,154,773,
#6,161,132, #6,230,192, #6,230,207, #6,240,459,
#6,330,593, and other patents issued or pending. Some
services supplied under license from Open Globe, Inc.
for U.S. Patent: #6,304,523.
Gracenote and CDDB are registered trademarks of
Gracenote. The Gracenote logo and logotype, and the
"Powered by Gracenote" logo are trademarks of
Gracenote.
1. Press HOME.
The HOME menu appears.
Audio CD and Music menu options
1. Press v / V to select a folder/file on the Audio CD
or Music menu then press ENTER.
The menu options appear.
The menu options displayed differ depending on
the selected media.
2. Press v / V / b / B to select an option, and press
ENTER.
[Play] Start playback the selected title.
[Random] Start or cancel random playback.
[Open] Opens the folder and a list of files in the
folder appears
[Delete] Deletes the file(s) from the media.
[Rename] Edits the file name. (page 28)
[Move] Moves the file(s) to another folder or
media. (page 29)
[Copy] Copies the file(s) to another folder or
media. (page 29)
[Prog. add] Adds the track(s) to Program list.
(page 25)
[Ripping] Rips audio tracks from your Audio CDs
and store them as MP3 files in the hard disk.
[Identify] Identify the audio CD tracks or music
files.
Open
HDD
Folder View
Play
Copy
Edit
Delete
Move
2. Select [MUSIC] option.
Rename
Prog. add
3. Select a media that contains MP3/WMA or audio
title then press ENTER.
The [Music List] menu appears on the TV screen.
Random
Identify
Open
DISC
Play
Play
Copy
Edit
Delete
DISC
Prog. add
Move
(Audio CD)
Random
(MP3/WMA)
Edit
Rename
Prog. add
Random
Identify
4. Use v/V to select a track then press B (PLAY).
Playback starts.
You can use variable playback functions.
Refer to pages 18-19.
Tips:
If you want to move to the upper directory, use
the v / V to highlight
and press ENTER.
Press and hold v to move to the previous
page.
Press and hold V to move to the next page.
5. To stop playback at any time, press STOP.
22
Open
USB
Play
Copy
Edit
Delete
Move
Prog. add
Random
Identify
: Disabled
Identify
Ripping
Rename
Music List Folder (HDD)
[Folder View] The identified and unidentified
audio files in the hard disk are displayed in the
folder list view.
[Song List] The identified audio files in the hard
disk are displayed in the file list view.
[Artist] The identified audio files in the hard disk
is displayed by the artist’s name.
[Album] The identified audio files in the hard disk
is displayed by the album title.
Random
1. Press v / V to select a file then press ENTER.
The menu options appear.
2. Press v / V to select [Random] option then press
ENTER.
The unit automatically begins random playback
and “RANDOM” appears on the menu screen.
3. To return to normal playback, select [Random]
option again then press ENTER.
Tip:
By pressing > during Random playback, the unit
selects another track and resumes Random playback.
- Data Revision: Indicates the version of the
Gracenote Data Base.
- Updated Level Count: Indicates the number of
the previously updated *.PKG file.
Notes:
After unexpected errors such as disconnection of
the power plug by the end user, power failure, etc.
occur during update, and then the unit powers on
again, all of the updating files are deleted. On the
other words, even the previously updated files are
deleted. In this case, you need to update the files
again.
Do not press POWER (or 1/I) during update.
Release the sleep mode before update.
Playback
8. Select [Update] option then press ENTER.
Updating your Gracenote® music
recognition service database (Monthly)
1. Download the update files to your computer from
the Web site.
Notes:
The update file size will be about 8-10 MB.
The downloading time will vary, depends on
your computer environment.
The update time takes about 1 hour.
2. Connect the USB storage device to your computer
or load a blank disc on your computer’s optical
disc drive.
Note:
If you use the USB storage device, format it
after saving a backup for your data in the USB
storage device.
MP3/WMA audio file requirement
File extensions
“.mp3”, “.wma”.
Recording
By updating your Gracenote® music recognition
service database, you can ensure your unit has the
latest disc information. To download the update files,
visit http://www.lgservice.com/ t SUPPORT t
Software
Sampling frequency:
within 16 - 48 kHz (MP3), within 8 - 48kHz (WMA)
Bit rate:
within 32 - 320kbps (MP3), 5 - 192kbps (WMA)
CD-R Format:
ISO 9660 and JOLIET.
DVD±R/RW Format:
ISO 9660 (UDF Bridge format)
Maximum Files/Disc:
Less than 999 (total number of files and folders)
3. Store the update file on the connected USB
storage device or the loaded disc.
4. Connect the USB storage device to your unit or
load disc on your unit’s CD slot loader.
5. Press HOME and select [MUSIC] option.
6. Select [DISC] or [USB] option and press ENTER.
7. Select a update file and press ENTER.
The menu option appears on the menu.
23
Identifying the audio CD tracks
or the stored music files in the
hard disk
You can identify the audio CD tracks or music files
from built-in database the CD track information.
Note:
This unit enables you to identify the recorded files
from radio, but the identifying will not work.
2. Repeat step 1 to mark additional track.
5. Press ENTER.
The menu options appear on the menu.
6. Select [Identify] option then press ENTER.
Make signature and search matched song.
7. The list of titles that are similar to your request
appears.
8. In the list of titles, select the title that matches your
music file with confirming that the Artist and Album
information is correct.
Identifying the audio CD tracks
1. Insert a audio CD into disc loader.
2. Select any track to identify.
3. Press ENTER.
The menu options appear on the menu.
4. Use v / V to select [Identify] option then press
ENTER. The track name is changed to the correct
song title.
Identifying the stored music files in the
hard disk (MP3 only)
If you identify the stored music files, the identified files
are properly categorized (for example under Artist,
Album or Song List).
1. Press HOME and select [MUSIC] option.
2. Select [HDD] option and press ENTER.
3. Select [Folder View] and press ENTER.
4. In the screen of Folder View, select a music file
you wish to identify.
Selecting multiple tracks
1. Press MARKER.
A check mark appears on the track.
Press MARKER again to cancel the marked
track.
24
9. Press ENTER.
[OK] is highlighted.
You can select [OK] or [cancel] by pressing b or B.
10. Press ENTER again.
If you select [OK], the track name is changed to
the selected song title. If you select the multiple
files, repeat the identifying process.
Note:
In most cases, this unit is able to identify the correct
information from the built-in database the CD track
information during the identifying process. However, this unit
might not be able to identify complete or accurate information
from the database.
This can happen for a number of reasons:
The CD information is not in the database. (This happens
most frequently with commercial CDs that are very new or
relatively rare.
The CD information is in the database, but the information
in the database is inaccurate or incomplete.
This unit cannot identify the WMA files.
This unit cannot identify the stored MP3 files in the disc or
in the USB device. To identify the stored MP3 files in the
disc or in the USB device, copy them to the hard disk.
Creating a Smart Playlist
You can create playlists of certain genre of music.
1. Press HOME and select [MUSIC] option.
2. Select [HDD] option and press ENTER.
3. Select [Song List], [Artist] or [Album].
4. In the screen of song list, Artist or Album select a
file you wish to create a smart playlist.
5. Press SMART.MIX.
MP3 audio file requirement (Identify)
Sampling frequency:
within 32 - 48 kHz
Bit rate:
within 32 - 320kbps
Program Playback with Audio
CD and MP3/WMA file
Program Playback enables you to make custom
playlists of Audio CD or MP3/WMA tracks. Programs
can contain up to 99 Audio CD tracks or 256
MP3/WMA files.
1. Use v / V to select a track/file (or folder) on the
Audio CD or Music menu.
Program list menu options
1. Press v / V to select a track/file on the Program
list then press ENTER.
The menu options appear.
Selecting multiple files/tracks (folders)
1. Press MARKER.
A check mark appears on the file/track or
folder. Press MARKER again to cancel the
marked file/track or folder.
2. Repeat step 1 to mark additional file/track
(folders).
2. Press ENTER.
The options appear on the left side of the menu.
3. Use v / V to select the [Prog. add] option then
press ENTER.
2. Use v / V to select an option then press ENTER
to confirm your selection.
[Play] Playback begins in the order in which you
programmed the tracks from the selected track.
[Random] Start or cancel random playback.
[Delete] Deletes the track(s) from the Program
list menu.
4. Repeat steps 1-3 to mark additional tracks.
Repeat Programmed Tracks
Press REPEAT to select the desired Repeat mode.
[TRACK] Repeats the current track.
[ALL] Repeats all tracks on the Program List.
[OFF] Cancels Repeat mode (no display).
Playback
Note:
If you select a folder for Programmed Playback, all
tracks/files in the folder are added to the Program List.
Erasing a Track from the Program list
1. Select the track you wish to erase from the
Program list. Use MARKER button to select
multiple tracks.
2. Press ENTER. The menu options appears
3. Select [Delete] option then press ENTER.
5. Use B to move to the Program list.
The programmed track you selected last is
highlighted on the Program list.
6. Use v / V to select the track you want to start
playing.
7. Press B (PLAY) to start.
Playback stops after playing the last programmed
track in the Program list.
8. To exit Program Playback and resume normal
playback, select a track on the original list by
pressing b and v / V and press B (PLAY).
Tips:
You can access or remove the Program list screen
by pressing MENU/LIST.
You can not remove the Program list screen during
the programmed playback and the programmed
x.
Xx
25
Viewing a JPEG File
Photo List menu options
This unit can play JPEG files. Before playing JPEG
recordings, read “Photo file requirement” on page 27
1. Press v / V to select a file on the [Photo List]
menu then press ENTER.
The menu options appear.
The menu options displayed differ depending on
the selected media.
1. Press HOME.
The HOME menu appears.
2. Select [PHOTO] option.
Selecting multiple files (folders)
3. Select a media that contains JPEG file then press
ENTER.
The [Photo List] menu appears on the TV screen.
1. Press MARKER.
A check mark appears on the file or folder.
Press MARKER again to cancel the marked file
or folder.
2. Repeat step 1 to mark additional file (folders).
2. Use v / V to select an option then press ENTER
to confirm your selection.
4. Use v / V to select a file, then press ENTER.
The menu options appear on the left side of the
menu.
Tips:
If you want to move to the upper directory, use the
v / V to highlight
and press ENTER.
You can also display HOME menu to select another
media by pressing HOME.
5. Use v / V to select [Full Screen] then press
ENTER.
The selected image is displayed in full screen.
Depending upon the size and number of JPEG
files, it could take a long time for the unit to read
the files.
[Open] Opens the folder and a list of files in the
folder appears
[Full Screen] Shows the selected file as full
screen.
[Delete] Deletes the selected file from the media.
[Slide Show] Displays Slide Show menu.
[Rename] Edits the file name. (page 28)
[Move] Moves the file(s) to another folder
(album) or media. (page 29)
[Copy] Copies the file(s) to another folder or
media. (page 29)
Open
Full Screen
HDD
Slide Show
Copy
Edit
Delete
Move
Rename
Open
Full Screen
DISC
Slide Show
Copy
Edit
Delete
Move
Rename
Press ENTER to appear or disappear this menu
during viewing the full screen.
6. To stop viewing at any time, press STOP.
The [Photo List] menu appears.
Open
Full Screen
USB
Slide Show
Copy
Edit
Delete
Move
Rename
: Disabled
26
Tip:
You can create new folder in the HDD.
Select [Edit-Copy-New Album] option then press
ENTER. “NONAME###” folder is created.
Photo file requirement
File extensions
“.jpg”
View Slide Shows
Slide show will automatically go to next picture at a
specified interval.
1. Select [Slide Show] option on the [Photo List]
menu.
2. Press ENTER.
The Slide Show menu appears.
Photo size:
Less than 4MB recommended
CD-R Format:
ISO 9660 and JOLIET.
DVD±R/RW Format:
ISO 9660 (UDF Bridge format)
Skip Images
[All] Views slide show all files.
[Speed] option:
Sets the Slide Show speed to [Slow], [Normal], or
[Fast].
While viewing a picture, press . or > once to
return to the previous file or advance to the next file.
4. Select the [Start] option then press ENTER to start
the Slide Show.
Rotate Images
5. Press STOP to stop the Slide Show and returns to
the [Photo List] menu.
Use v / V while viewing a picture to flip the picture
counterclockwise or clockwise.
Playback
Notes on JPEG file
Progressive and lossless compression JPEG image
files are not supported.
3. Use b / B / v / V to set the options.
[Object] option:
[Selected] Views slide show only selected files
with MARKER button. Use the MARKER button
to select multiple files.
To Pause the Slide Show
1. Press X to pause slide show.
2. When you want to continue slide show, press
X or B (PLAY).
Recording
Maximum Files/Disc:
Less than 999 (total number of files and folders)
27
Editing a MP3/WMA, JPEG, DivX
file
Naming a file on the HDD
These descriptions are MP3 file’s operation for
example, other kind’s files are operated same way.
1. Select a file you wish to rename on the menu.
Note:
The MP3/WMA, JPEG, and DivX files on the disc or
HDD cannot be copied or moved to USB device.
You can name the files on the HDD independently.
2. Press ENTER.
The menu options appear on the menu.
3. Select [Edit] option then press ENTER.
Edit options appears.
Erasing a file(s)/folder(s) from the HDD
You can erase MP3/WMA, JPEG or DivX file(s)/
folder(s) on the HDD.
1. Select a file you wish to erase on the menu.
Selecting multiple files (folders)
1. Press MARKER.
A check mark appears on the file or folder.
Press MARKER again to cancel the marked file
or folder.
4. Select [Rename] option then press ENTER.
Keyboard menu appears.
2. Repeat step 1 to mark additional file (folders).
2. Press ENTER.
The menu options appear on the menu.
5. Enter a name for the title. Use b / B / v / V to
select a character then press ENTER to confirm
your selection.
3. Select [Delete] option then press ENTER.
The selected file(s) is deleted.
OK: Select to finish.
Cancel: Cancels all entered characters.
A file name remains unchanged.
Space: Inserts a space at the cursor position.
Delete: Deletes the previous character at the
cursor position.
b / B: Moves cursor to left or right.
6. Choose OK then press ENTER to fix the name
and return to the previous menu screen.
7. Press RETURN (O) repeatedly to exit the menu.
28
Copying a file(s) to another media or
folder
You can copy a file(s)/folder(s) to HDD or folder.
Moving a file(s)
You can move a file(s)/folder(s) to HDD or folder.
After moving, the file(s)/folder(s) are deleted from the
current location.
1. Select a file you wish to copy on the menu.
Selecting multiple files (folders)
1. Press MARKER.
A check mark appears on the file or folder.
Press MARKER again to cancel the marked file
or folder.
1. Follow steps 1-3 as shown left.
2. Press ENTER.
The options appear on the left side of the menu.
3. Select [Move] option then press ENTER.
Move menu will appear.
2. Repeat step 1 to mark additional file (folders).
2. Press ENTER.
The menu options appear on the menu.
3. Select [Edit] option then press ENTER.
Edit options appears.
4. Select [Copy] option then press ENTER.
Copy menu appears.
Playback
4. You can select a album (folder) to move.
Select a album (folder).
Also, you can create new album (folder). Select
[New Album] option on the Move menu then press
ENTER.
“NONAME###” folder is created.
5. Select [Move] option then press ENTER to begin
moving.
5. You can select a album (folder) to copy.
Select a album (folder).
Also, you can create new album (folder). Select
[New Album] option on the Copy menu then press
ENTER.
“NONAME###” folder is created.
Recording
6. Select [Copy] option then press ENTER to begin
copying.
Note:
If a folder’s depth is more than 5 level, the copy is not
available.
29
AUX/MOBILE/OPTICAL
(Listening to an external source)
You can listen to the sound of the connected external
device through your unit.
1. Check the external device has been properly
connected. (See Connecting an additional
appliance on page 12.)
2. Press MOBILE on the remote control to select
MOBILE mode. (If you are in any menu mode,
remove it completely by pressing RETURN or
HOME repeatedly.)
or
Press HOME and b or B to select Easy Menu,
and then select AUX or OPTICAL.
3. To avoid noise distortion, turn down the volume on
your external device.
4. Press PLAY on the connected device to start
playback.
30
Using Apple iPod
You can perform the basic operations of your iPod
using the supplied remote control with this unit.
Notes:
You need an Apple iPod universal dock with a builtin infrared (IR) receiver and an audio cable with a
3.5 millimeter stereo miniplug.
It works with all iPod models that have a dock
connector.
Depending on the type of iPod, you may need to
insert one of the dock adapters into the dock slot
before you station your iPod.
Adjust the volume to a moderate level before you
connect your iPod and this unit.
1. Station your iPod in the dock.
2. Connect one end of an audio cable with a 3.5
millimeter stereo miniplug into the MOBILE jack on
the rear of the active subwoofer.
5. To adjust the sound and volume, use the sound
controls on your external device and this unit.
3. Connect the other end of an audio cable with a 3.5
millimeter stereo miniplug into the dock line out
jack.
Note:
In MOBILE mode, B (PLAY), X, . and >
buttons operate only on the connected Apple iPod
through an Apple iPod universal dock with a built-in
infrared (IR) receiver. To release the MOBILE mode,
press mode button (TUNER, HDD, DISC, USB) you
want, or press HOME.
4. Press MOBILE on the remote control to select
MOBILE mode.
5. Point the supplied remote control with this unit at
the front of the dock.
6. Press B (PLAY), X, . or > on the supplied
remote control with this unit to turn iPod on.
7. You can control play (B), pause (X) and skip
(./>).
You can turn iPod off by pressing and holding B
(PLAY) or X on the supplied remote control with
this unit.
Recording
By ripping CDs and recording from radio you can build
your music library on hard disk.
To find your ripped tracks
You can find and playback the ripped tracks in hard
disk.
1. Press HOME and select [MUSIC] option.
2. Select [HDD] option and press ENTER.
Ripping CDs (for audio CDs)
After you identify a audio CD, if you rip the audio CD,
the ripped CD tracks are properly categorized (for
example, under Artist, Album or Song List) and also
stored with the existing files in the hard disk.
1. Insert a CD into disc loader, CD graphic printed
side facing you.
2. Press HOME and select [MUSIC] option.
3. Select [DISC] option and press ENTER.
4. In the screen of track list, select a track you wish
to rip.
Selecting multiple tracks
1. Press MARKER.
A check mark appears on the track.
Press MARKER again to cancel the marked
track.
2. Repeat step 1 to mark additional track.
5. Press ENTER.
The menu options appear on the menu.
6. Select [Ripping] option then press ENTER.
Ripping options appears.
7. You can select a album (folder) to copy.
Select a album (folder).
Also, you can create new album (folder). Select
[New Album] option on the ripping menu press
ENTER.
“NONAME###” folder is created.
3. If unidentified, you can find them only in [Folder
View].
Recording from radio
A maximum of 5-hour recording can be made from
the radio.
The minimum required time is 3 seconds.
1. In radio mode, tune to the desired radio station.
2. Press z (or REC on the front of unit). Recording
starts.
3. To stop recording, press x (or STOP on the front
of unit). The recording is saved as a MP3 file
under AUDIO RECORDING folder in MUSIC_
HDD Folder View. A file name is given, e.g.
RECORDINGxxx.mp3 (where xxx denotes a
number)
Notes:
This unit enables you to identify the recorded files
from radio, but the identifying will not work.
When you insert a disc into disc loader during
recording from radio, the recording stops.
Do not press EJECT during recording from radio.
Recording
8. Select [Ripping] option then press ENTER to begin
ripping.
Notes:
If you a folder’s depth is more 5 level, the copy is
not available.
It takes some time to convert the ripped tracks into
MP3 files.
If you rip and then play back the disc encoded with
DTS, there will be only the noise of an unprocessed
DTS signal.
31
Timeshift
HDD
Do not miss a part from a live broadcast.
If the telephone rings while you are listening to your
favorite live broadcast, just press TIMESHIFT and X
before answering the phone.
When the timeshift function is activated, the sound will
be muted and the broadcast is then recorded for later
listening to.
After the phone call or listening to interruption,
press B (PLAY) or m/M listen to the program.
Press x (STOP) to return to the live broadcast.
If you stop the timeshift, the recording is deleted.
Timeshift (Pause, Live Radio/Playback)
Operation HDD
You can store a program in the HDD storage cache
temporarily.
Press TIMESHIFT while listening to a radio
program.
The Progress Bar display appears on the screen as
shown below. The Progress Bar changes to timeshift
icon after 10 seconds.
1
3
2
4
5
1. Indicates playback mode.
2. Indicates current Timeshift position.
3. Indicates Timeshift start time.
4. Indicates Timeshift elapsed time.
5. Indicates the time that is one hour from Timeshift
start time.
Tip:
You can use trick play functions (Scan, etc.) during
timeshift. Refer to Playback Operation on pages
18-20.
Notes:
After 3 hours, the Timeshift will stop automatically.
When you insert a disc into disc loader during the
timeshift, the timeshift stops.
32
Do not press EJECT during the timeshift.
Jump to Start or End during Timeshift
1. Press ENTER during timeshift. The menu will
appear.
2. Press b and playback starts from the very
beginning of the timeshift.
Press B and jumps to the very end of the timeshift
then goes to pause mode.
To Exit the Timeshift
1. Press STOP to exit Timeshift function.
Confirm message will appear.
2. Use b / B to select [Yes] then press ENTER.
Additional Information
Presetting the Radio Stations
You can preset 50 stations for FM and AM (MW).
Before tuning, make sure that you have turned down
the volume.
1. Press TUNER on the remote control. (If you are in
any menu mode, remove it completely by pressing
RETURN or HOME repeatedly.)
or
On the home menu screen, select RADIO and
then press ENTER.
2. And then every time you press TUNER, FM and
AM (MW) changes alternately.
3. Press and hold TUN.- or TUN.+ on the remote
control for about three seconds until the frequency
indication starts to change, then release.
Scanning stops when the unit tunes in a station.
4. Press PROG./CLEAR on the remote control.
A preset number will flash in the display window.
Listening to the Radio
Preset radio stations in the unit’s memory first (see
“Presetting the radio stations” on the left).
1. Press TUNER until AM (MW) or FM appears in the
display window.
The last received station is tuned in.
2. Press PRESET + or PRESET - repeatedly on the
remote control to select the preset station you
want.
Each time you press this button, the unit tunes in one
preset station at a time.
3. Adjust the volume by pressing VOL + or VOL- on
the remote control repeatedly.
To turn off the radio
Press POWER to turn the unit off or select another
function mode (HDD, MOBILE, DISC, USB).
To listen to non-preset radio stations
Use manual or automatic tuning.
For manual tuning, press TUN.- or TUN.+ on the
remote control repeatedly.
For automatic tuning, press and hold TUN.- or
TUN.+ on the remote control for about three
seconds on the remote control.
5. Press PRESET + or PRESET - on the remote
control to select the preset number you want.
6. Press PROG./CLEAR on the remote control.
The station is stored.
7. Repeat steps 3 to 6 to store other stations.
To tune in a station with a weak signal
Press TUN.- or TUN.+ repeatedly in step 3 to tune in
the station manually.
To clear all the stored stations
Press and hold PROG./CLEAR for about five seconds
and “ERASE ALL” is appeared in the display window
and then press PROG./CLEAR again, the stations are
cleared.
If you have accidentally entered into the “ERASE
ALL” mode and you do not wish to clear the
memory, do not press any key. After a few seconds
“ERASE ALL” will go off by itself and change to
normal mode.
To select a preset radio station directly
You can use the number buttons on the remote
control to select a preset radio station directly.
For example, to listen to the preset station 4, press 4
on the remote control. To listen to the preset station
19, press 1 and then 9 (within 3 seconds).
For your reference
If an FM program is noisy
Press AUDIO repeatedly on the remote control so
that “STEREO” changes to MONO in the display
window. There will be no stereo effect, but the
reception will improve. Press this button repeatedly
again to change “MONO” to “STEREO”.
To improve reception
Reorient the supplied antennas.
Recording
Reference
Reference
Note:
If all stations have already been entered, the PRESET
FULL message will appear in the display window for a
moment and then a preset number will flash.
To change the preset number, follow the steps 5-6 as
above.
33
Sleep
You can set a certain period of time after which the
unit will switch to standby.
1. On the remote control, press SLEEP repeatedly to
select the desired time period options (in minutes):
Display shows the selected option briefly and
returns to its previous status.
2. To view the time countdown to the standby mode,
press SLEEP again.
To deactivate the sleep timer, press SLEEP until
previous status is displayed.
or
Press POWER to switch the unit to standby (or
1/I on the front of the unit).
Controlling Your TV with the Supplied
Remote Control
You can control the sound level, input source, and
power switch of your LG/GoldStar TV with the
supplied remote.
1. While holding down TV POWER button,
press CHANNEL + or -.
2. Release TV POWER button.
You can control your TV using the buttons below.
Dimmer
This function will change the brightness of the display
window on the top panel during in power-on status.
Press DIMMER repeatedly.
TV Control
Buttons
XTS pro
Each time you press XTS pro the setting changes in
the following order.
NORMAL ↔ XTS-P ON
XTS-P ON
The unique sound quality of the LG Technology
creates the optimum sound for you to play the
perfect playback of the original sound and to feel
the living sound source.
NORMAL
XTS-P mode tune off
By pressing
You can
POWER
INPUT
Turn the TV on or off.
Switch the TV’s input source
between the TV and other input
sources.
CHANNEL +/–
Scans up or down through
memorized channels.
VOLUME +/–
Adjust the volume of the TV.
Virtual sound
Press VSM to set the virtual sound.
Source
2.1 ch.
5.1 ch
34
Display
VIRTUAL ON
VIRTUAL ON
Effect
3D STEREO
Virtual sound
3D STEREO
Realtime 3D positioned sound rendering
technology with stereo sources, optimized for
stereo speakers. Listeners may experience
amazing virtual surround effects with their own
multimedia players.
Virtual sound
A pending downmix technology converts 5.1
channel to 2 channel sound having directional
information of audio. And it makes a 2 channel or
2.1 channel feel 5.1 channel sound.
Note:
When you replace the batteries of the remote, you
may have reset the remote control.
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
Area
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Code
MY
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
PY
PH
PL
PT
RO
RU
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose an area code from this list.
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
Area
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Greenland
Code
ET
FJ
FI
FR
DE
GB
GR
GL
Heard and McDonald Islands HM
Hungary
HU
India
IN
Indonesia
ID
Israel
IL
Italy
IT
Jamaica
JM
Japan
JP
Kenya
KE
Kuwait
KW
Libya
LY
Luxembourg
LU
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
SA
SN
SG
SK
SI
ZA
KR
ES
LK
SE
CH
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Reference
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
35
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Symptom
The power cord is disconnected.
Plug the power cord into the wall
outlet securely.
No picture.
The TV is not set to receive unit
signal output.
Select the appropriate video input mode
on the TV so the picture from the unit
appears on the TV screen.
The video cable is not connected
securely.
Connect the video cable securely.
The connected TV power is turned off.
Turn on the TV.
The volume is minimized.
Adjust the volume.
The headphones are connected.
Disconnect the headphones.
The MUTE button is switched on.
Switch off MUTE.
The disc is dirty.
Clean the disc.
An unplayable disc is inserted.
Insert a playable disc. (Check the disc
type, color system, and regional code.)
The disc is placed upside down.
Place the disc with the playback side
down.
The disc is dirty.
Clean the disc.
The Rating level is set.
Cancel the Rating function or change
the rating level.
Radio reception is poor
The signal is too weak.
Adjust the antenna or connect an
external antenna for better reception.
The remote control
does not work properly.
The remote control is not pointed at
the remote sensor of the unit.
Point the remote control at the remote
sensor of the unit.
The remote control is too far from the
unit.
Operate the remote control within
7 m.
There is an obstacle in the path of the
remote control and the unit.
Remove the obstacle.
The batteries in the remote control
are exhausted.
Replace the batteries with new ones.
The display window is
dim, and the light on
the touch pad and the
active subwoofer are
turned off.
The dimmer function is activated.
Switch off DIMMER.
B (PLAY), X, . and
> buttons do not
operate.
This unit is in MOBILE mode.
To release the MOBILE mode, press
mode button (TUNER, HDD, DISC,
USB) you want, or press HOME.
Sound cannot be heard
or is of poor quality.
The playback picture is
poor.
The unit does not start
playback.
Resetting the unit
If you observe any of the following symptoms...
36
Solution
No power.
The unit is plugged in, but the power will not turn
on or off.
The unit is not operating normally.
...you can reset the unit as follows:
Press and hold the POWER button for at least five
seconds. This will force the unit to power off then
turn the unit back on.
Unplug the power cord, wait at least five seconds,
and then plug it in again.
Specifications
General
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Audio recording format
Sampling frequency
Compression format
Sampling bitrate
326 X 215 X 78 mm (w x h x d) without foot
3.1kg
5˚C to 35˚C
5 % to 90 %
44.1kHz
MP3
128Kbps
Recording
Recordable media
HDD (80GB)
Playback
Frequency response
Signal-to-noise ratio
Harmonic distortion
Dynamic range
Inputs
Audio input (optical audio)
AUDIO IN
Outputs
VIDEO OUT
COMPONENT VIDEO OUT
HDMI video/audio output
DVD (PCM 48 kHz): 20 Hz to 20 kHz, CD: 20 Hz to 20 kHz
DVD (PCM 96 kHz): 20 Hz to 44 kHz
More than 85 dB (SPEAKER OUT)
Less than 0.007% (SPEAKER OUT)
More than 85 dB (SPEAKER OUT)
3 V (p-p), 75 Ω, Optical connector x 1
0 dBm more than 47 kohms, RCA jack (L, R) x 1
1 Vp-p 75 Ω, sync negative, RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
19 pin (HDMI standard, Type A)
Amplifier
Output power
Front: 75W + 75W (4Ω at 1 kHz, THD 10 %)
Subwoofer: 150W (3Ω at 60 Hz, THD 10 %)
Tuner Specifications
Tuning Range (FM)
Intermediate Frequency (FM)
Signal-to-noise ratio
Tuning Range (AM)
Intermediate Frequency (AM)
Antenna
87.5 - 108 MHz
10.7 MHz
60 dB (Mono)
522 - 1,620 kHz
450 kHz
Wire antenna (FM)
Loop antenna (AM)
Speakers
Type:
Impedance:
Frequency Response:
Sound Pressure Level:
Max. Input Power:
Net Dimensions (WxHxD):
Net Weight:
2 Way 3 Speaker
4Ω
100 - 20,000 Hz
82 dB/W (1m)
150W
104 x 328 x 216 mm
2.9 kg
Active Subwoofer (J10HD-SA)
Power requirements:
AC 110-240V, 50/60 Hz
Power consumption:
75W
Type:
1 Way 1 Speaker
Impedance:
3Ω
Frequency Response:
65 - 1,500 Hz
Sound Pressure Level:
80 dB/W (1m)
Max. Input Power:
300W
216x 328 x 317 mm
Net Dimensions (WxHxD):
Net Weight:
8.3 kg
Reference
Front (J10HD-SF)
Designs and specifications are subject to change without notice for improvement.
37
P/NO : MFL38591005
Download PDF

advertising