LG | LH-D6230A | LG LH-D6230A Owner’s Manual

LH-D6230A JA2ILLS
DVD/CD RECEIVER
OWNER'S MANUAL
MODEL: LH-D6230
(Main Unit: LH-D6230A,
Speakers: LHS-D6230T, LHS-D6230W)
CD-R/RW
Before
please
connecting up, operating or repairing this
read this instruction booklet carefully and
product,
completely.
Attention !!
This unit is AC 110V/230V switchable. Unit
is preset at AC 230V position.
(AC 110/230V switch is located
Bottom of the
on
the
set.)
NOTE: If the power voltage of your area is
AC 110V, please switch the dual voltage
switch to AC 110V before
connecting
AC power cord to the AC outlet.
the
Precautions
Safety
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
risk of electric
a
shock to persons.
The exclamation mark within
is intended to alert the
important operating
user
an
equilateral triangle
to the presence of
and maintenance
instructions in the instructions
(servicing)
accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
WARNING: Do not install this
such
as a
book
case or
equipment
in
a
confined space
similar unit.
CAUTION:
This DVD/CD receiver
To
employs
a
Laser
System.
proper
product, please read this owner 's
carefully and retain it for future reference. Should the
require maintenance, contact an authorized service loca(see service procedure).
ensure
use
of this
manual
unit
tion
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous radiation exposure.
To
prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
vases, should be
placed
on
the
apparatus.
OTES ON COPYRIGHTS:
It is forbidden
by law to copy, broadcast, show, broadcast
play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
via cable,
SERIAL NUMBER: The serial number is located
on
the back
of this unit. This number is
to others. You should
This
product
is manufactured to
radio interference
DIRECTIVE
73/23/EEC.
2
requirements
comply
with the
retain this
of EEC
89/336/EEC, 93/68/EEC and
Model No.
Serial No.
guide
as a
unique to this unit and not available
record requested information here and
permanent record of your purchase.
___________________________________
___________________________________
Table of Contents
Introduction
22-23
Operation with Audio CD and MP3 Disc
.22
PlayinganAudioCDandMP3Disc.
NotesonMP3Recordings.................22
.
SafetyPrecautions.........................2
TableofContents..........................3
.
Precautions.............................5
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Search.............................23
NotesonDiscs..........................5
.
.
.
MovingtoanotherTrack...............23
RepeatTrack/All/Off...................23
PlayableDiscs...........................4
.
.
.
Pause.............................23
BeforeUse..............................4-5
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
.
RepeatA-B.........................23
3DSurround........................23
.
RemoteControl............................7
RearPanel................................8
Preparation
.23
ChangingtheAudioChannel.
OperationwithJPEGDisc...................24
ViewingaJPEGdisc.....................24
MovingtoanotherFile.................24
.
.
.
.
.
.
.
.
.
.
StillPicture.........................24
Connections............................9-13
AerialConnections........................9
Toflipthepicture.....................24
Torotatepicture......................24
.24
NotesonJPEGRecordings.
ProgrammedPlayback.....................25
Programmed Playback with Audio CD
ConnectingtoaTV......................10
.11
ConnectingtoExternalEquipment.
SpeakerSystemConnection...............12
SpeakerPositioning......................13
BeforeOperation.......................14-18
Mini Glossary for Audio Stream & Surround
.25
ProgrammedPlaybackwithVideoCD.
SpeakerSetup............................26
Mode.................................14
AdditionalInformation.....................26
SoundMode...........................14
GeneralExplanation......................15
On-ScreenDisplay.......................15
InitialSettings........................16-18
16
Initial Settings General Operation.
Language..........................16
LastConditionMemory...................26
SystemSelect..........................26
OperationwithRadio....................27-28
Presettingtheradiostations................27
Listeningtotheradio.....................27
SleepTimerSetting......................28
Picture.............................16
Dimmer...............................28
SpeakerSetup.......................17
Mute.................................28
Others.............................17
UsingHeadphoneJack...................28
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
andMP3Disc..........................25
.
.
.
.
.
.
ParentalControl......................18
Reference
Operation
.19-21
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............19
.
.
.
.
.
.
.
GeneralFeatures........................19
MovingtoanotherTITLE...............19
19
Moving to another CHAPTER/TRACK
.
.
.
.
.
Search.............................19
Still Picture and
Frame-by-Frame Playback
.
LanguageCodeList.......................29
CountryCodeList.........................30
Troubleshooting........................31-32
Specification.............................33
About the
20
symbols
Indicates hazards
for instructions
likely to cause
damage.
SlowMotion.........................20
itself
Repeat............................20
RepeatA-B.........................20
Indicates
special operating
Indicates
tips
or
harm to the unit
other material
features of this unit.
TimeSearch........................20
3DSurround........................20
Zoom..............................21
MarkerSearch.......................21
SpecialDVDFeatures....................21
TitleMenu..........................21
DiscMenu..........................21
CameraAngle.......................21
.21
ChangingtheAudioLanguage.
.21
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Subtitles...........................21
and hints for
making
the task easier.
Manufactured under license from Dolby Laboratories. "Dolby",
"Pro Logic", and the double-D symbol are trademarks of Dolby
Laboratories. Confidential
1997
Dolby Laboratories.
Unpublished works. Copyright
rights reserved.
1992-
All
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and
other worldwide patents issued and pending. "DTS" and "DTS
Digital Surround" are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2000 Digital Theater Systems,
Inc. All rights reserved.
3
INTRODUC
Before Use
Playable
Disc-related terms
Discs
Title
The main film content
(8cm/12cmdisc)
or
(VCD)
(8cm/12cmdisc)
you to locate it
Audio CD
(8cm/12cmdisc)
In
addition, this unit can play a DVD-RW, DVD+RW,
CD, SVCD and CD-R or CD-RW that
contains audio titles, MP3 or JPEG files.
Kodak PICTURE
Depending
or
itself,
some
cannot be
--
--
the conditions of the
the CD-R/RW
ment
CD-R/RW
played
on
recording equip(or DVD-RW, DVD+RW) disc
(or DVD-RW, DVD+RW) discs
irregularly shaped
octagonal). It may result in
or
otes
Some
use
on
(Video
Sections of
CDs
enabling
On
(e.g., heart-shaped
malfunctions.
other functions may be added.
Make sure to also refer to the instructions
only)
piece
assigned
musical
on a
a
video CD
track
number,
you to locate the track you want.
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
Types
There
and still
of video CDs
are
two
supplied
with
the DVDs and Video CDs. Some DVDs made for busi-
purposes may not be able to be
played
on
the
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
PBC
or
with the
system via
menus, search
functions,
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
still
other
pictures
included in
the disc.
unit.
code of the DVD/CD receiver and DVDs
This DVD/CD receiver is
designed and manufacplayback of region "5" encoded DVD
5
software. The region code on the labels of some
DVDs indicates which type of player can play
those discs. This unit can only play DVDs labelled "5" or
"ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVDs that have no region code label may still be
subject to area restrictions and therefore not playable.
4
or a
of DVDs and Video CDs
designed by the software manufacturer,
playback features of the unit may not be available
tured for
CD and audio CD
picture
you to locate the scene you want.
A scene is composed of one or several tracks.
DVDs and Video CDs
playback operations
Regional
a
audio CD. Each track is
or an
disc content
ness
enabling
easily.
Scene
(the
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
some
feature content
the unit.
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
Do not
accompanying
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
Track
otes
on
or
additional feature content, or music album.
Each title is assigned a title reference number
Video CD
--
(DVD only)
DVD
Video CDs not
equipped
with PBC
(Version 1.1)
Operated
way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
in the
same
Before Use
(Continued)
Storing
Precautions
After
the unit
Handling
discs
playing,
store the disc in its
case.
When
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
The
light,
shipping the unit
original shipping carton and packing materials may
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a
nearby TV, VCR, or radio
during playback. In this case, position
may be disturbed
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
near
or
radio,
or
turn off the
volatile
liquids,
such
as
the unit. Do not leave rubber
leave marks
Cleaning
a
discs
Fingerprints
or
and dust
the disc
on
reduce sound
with
a
clean
quality.
cloth. Wipe
Before
distort the
can
playing,
picture
clean the disc
the disc from the centre out-
wards.
on
a
insecticide spray,
or
long period
plastic products in
of time. They will
the surface.
the unit
To clean the cabinet
use a
Cleaning
temperature
the exterior surfaces clean
use
contact with the unit for
Use
as there may be a considerable
increase inside the car.
soft, dry cloth. If the surfaces
soft cloth
solution. Do not
benzene,
or
use
thinner,
are
moistened with
lightly
strong
as
a
extremely dirty,
detergent
mild
solvents such
these
as
might damage
alcohol,
the surface
Do not use strong solvents such as alcohol, benzene,
thinner, commercially available cleaners, or anti-static
spray intended for
About
vinyl
records.
Symbols
of the unit.
About the
To obtain
clear
a
picture
The DVD/CD receiver is
a high-tech, precision device. If
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
the
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Disc
Handling
Hold the disc
on
playback side of the disc.
by the edges so that fingerprints
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function
VCD1.1
Do not touch the
get
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function
will not
CD
MP3
JPEG
Audio CDs.
MP3 disc
JPEG disc
5
INTRODUC
Front Panel and
Display
Window
STANDBY/ON
OPEN/CLOSE
button
STANDBY indicator
Lights red when the receiver
is in Standby mode (off).
DISPLAY
PLAY button
Window
DISC
VOLUME
Tray
controller
PAUSE/STEP/MONO/STEREO
Remote
button
TUNING
STOP/CLEAR/MEMORY button
PHONES
(DOWN/UP)/
SKIP/SCAN buttons
Indicates current
Indicates current
surround mode
or
sensor
connector
chapter
track number
Indicates current
audio stream
Repeat playback
Indicates current
mode indicators
function:
MEMORY
indicator
player
Playback, Pause,
TUNED indicator
etc.
STEREO indicator
Programmed
playback active
Indicates current title number
MUTE indicator
ANGLE active
SLEEP indicator
DVD inserted
VCD Video CD inserted
MP3 MP3 disc inserted
6
Total
playing time/Elapsed time/
Frequency/Sleep time/Surround
mode/Volume etc. indicators
Remote Control
OPEN/CLOSE button
POWER button
AUX button
BAND button
CD/DVD button
MUTE button
DIMMER button
SLEEP button
INTRODUC
NUMBER buttons
REPEAT A-B button
REPEAT button
PROGRAM button
SOUND MODE button
AUDIO button
CLEAR button
PRESET(+/-)
VOLUME
buttons
(+/-)
buttons
SUBTITLE button
ZOOM button
RETURN button
ENTER button
ARROW buttons
For
use
on a
GUI
in
highlighting
a
selection
DISPLAY button
screen, TITLE and
MENU screen.
menu
STOP button
MENU button
Use the MENU button to
the
included
menu screen
PAUSE/STEP button
display
on
PLAY button
DVD
SKIP/SCAN
video discs.
TITLE button
Use the TITLE button to
display
the title
screen
(
/
)
buttons
Press and hold button for about
two seconds for search function.
SETUP button
ANGLE button
included
DVD video discs.
on
SLOW SCAN
(Q
/
SEARCH button
R) buttons
MARKER button
Remote Control
Remote control
Operation Range
Point the remote control at the remote
sensor
and press
remote
Angle:
sensor
installation
Remove the
the buttons.
Distance: About 23 ft
battery
battery
of the remote
(7 m)
from the front of the
AAA AAA
sensor
R03
cover on
the
control, and insert
(size AAA) batteries
aligned correctly.
with
rear
two
and
About 30° in each direction in front of the remote
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
Rear Panel
AM Antenna Connectors
FM 75Ω Antenna Connector
AUXILIARY INPUT Connectors
SPEAKER Connectors
RR
LL
S-VIDEO OUT
POWER CORD
Connector
MONITOR OUT
Connector
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
8
Connections
Aerial Connections
Connect the
supplied FM/AM aerial for listening to the radio.
loop aerial to the AM aerial connector.
Connect the AM
Connect he FM wire aerial to the FM aerial connector.
AM
FM Wire aerial
Loop
aerial
PREATION
(supplied)
(supplied)
RR
LL
otes
To
prevent noise pickup, keep the AM loop aerial away from the DVD/CD receiver and other components.
Be
sure
After
to fully extend the FM wire aerial.
connecting the FM wire aerial, keep it
as
horizontal
as
possible.
9
Connections
(Continued)
to a TV
Connecting
Rear of TV
S-VIDEO
INPUT
VIDEO
INPUT
AUDIO INPUT
L
R
L
V
S
RR
Make
the
one
of the
capabilities
LL
following connections, depending
existing equipment.
on
of your
Video connection
Connect the MONITOR OUT
receiver to the VIDEO IN
ips
Depending
to
cable
on
your TV and other equipment you wish
are various ways you could connect
connect, there
the DVD/CD receiver. Use
one
of the connections
jack
jack
on
the DVD/CD
on
the TV
using
the video
(V).
S-Video connection
described below.
Connect the S-VIDEO OUT
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
er
to the S-VIDEO IN
cable
jack
jack
on
on
the DVD/CD receiv-
the TV
using
the S-Video
(S).
best connections.
Caution
--
Make
sure
the DVD/CD receiver is connected
to the TV. Select the correct AV
--
directly
input on your TV.
Do not connect your DVD/CD receiver to TV via your
VCR. The DVD image could be distorted by the copy
protection system.
10
otes
The
signal
of S-VIDEO OUT
jack
will
output only
when the function mode is selected to CD/DVD.
When you connect the DVD/CD receiver to your TV,
be sure to turn off the power and unplug both units
from the wall outlet before
making
any connections.
Connections
Connecting
(Continued)
to External
Equipment
Rear of VCR
(or
LD
VIDEO
OUTPUT
AUDIO OUTPUT
L
RR
PREATION
player, etc)
R
LL
Connection
Connect the AUX IN
er
to the AUDIO
er, etc
using
(L/R) jacks on the DVD/CD receivOUT (L/R) jacks on the VCR, LD play-
the audio cables.
ip
Press AUX
on
the remote control to select
input
to these
jacks.
AUX appears
on
the
Display
Window.
11
Connections
(Continued)
Speaker System Connection
Connect the
speakers using
To obtain the best
possible
the
supplied speaker
surround
cords.
sound, adjust the speaker parameters (volume, distance, etc.).
Center
speaker
Front
Front
speaker
(Right)
speaker
(Left)
RR
LL
Subwoofer
Rear speaker
(Right surround)
Rear speaker
(Left surround)
otes
Be
sure
to match the
speaker
cable to the
appropriate
terminal
on
the
components:
+
to
+
and
--
to
--.
If the cables
are
reversed, the sound will be distorted and will lack base.
If you use front speakers with low maximum input rating,
Do not remove the front cover of supplied speaker.
12
adjust
the volume
carefully
to avoid excessive
output
on
the
speakers.
Connections
(Continued)
Speaker Positioning
In the
of normal
case
position
the 6
use
speakers (2
front
speakers,
centre
speaker,
2
rear
speakers
and sub-
woofer).
If you want to
subwoofer.
?
?
play
Front speakers
According to your listening position
speakers to 45 degree.
Centre
speaker
speakers
The centre
?
the excellent bass
and front
sound, DTS digital surround
set up the
speakers
are
for
speakers
ideally
the
equal
same
or
Dolby Digital surround,
distance. And
height.
But
by hearing position
normally place
it above
or
you should connect
a
set up the interval between
below the television.
Rear
speakers
right behind the listening area. These speakers recreate sound motion and atmosphere required for surround
sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or
above the level of the listener's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse
Place left and
the sound.
In the
rear
?
case
of
speakers
a
smaller
above 60
room
-
90
size, if the audience is
cm
than the listener's
near
to the
rear
wall set the
rear
speakers opposite
each
other, and
set the
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Speaker
(Left)
Speaker
Front
Speaker
(Right)
Rear
Rear
Speaker
(Left)
Speaker
(Right)
Speaker Positioning Example
13
PREATION
Before
Mini
Operation
for Audio Stream &
Glossary
right speakers and subcompletely bypass
the sound field processing. This allows you to play any source
using only the front left and right speakers and subwoofer.
woofer. Standard two channel
Allows you to enjoy 5.1(or 6) discrete channels of high quality
digital audio from DTS program sources such as discs, DVD
compact discs, etc.bearing the trademark. DTS Digital
You
tional
of the
degree sound field. The
trademark of DTS Technology, LLC.
under license from DTS Technology, LLC.
term DTS is
a
Manufactured
a
true 360
(stereo)
sources
Sound Mode
Surround delivers up to 6 channels of transparent audio(which
means identical to the original masters) and results in excep-
clarity throughout
(2CH STEREO)
the sound from the front left and
Outputs
Surround mode
and
BYPASS
enjoy surround sound simply by selecting one
pre-programmed sound fields according to the
can
program you want to listen to.
Press SOUND MODE
repeatedly until the sound mode
display window as below.
you want appears in the
The
Dolby Digital surround format lets you enjoy up to 5.1
digital surround sound from a Dolby Digital promark, you can
gram source. If you play DVDs with
enjoy even better sound quality, greater spatial accuracy, and
improved dynamic range.
channels of
"
"
When PCM indicator is
display
Each time you press SOUND MODE button, the sound
changed in the following order;
PRO LOGIC
Use this mode when
playing
"
"
movie
or
Dolby Digital
mark. This mode
provides
in the
mode is
→
PL2 MOVIE
3D SURROUND
which carries the
only displayed
window:
→
→
PL2 MUSIC
→
PL2 MATRIX
→
BYPASS
2 channel
the effect
of
being in a movie theatre or live concert house-an effect with
an intensity which can only be obtained through DOLBY PRO
LOGIC SURROUND. The effect of the front/back/left/right
movement of the sound image, as well as the sense of fixed
position in the sound image, is much clearer and more dynamic than before.
When DVD is inserted.
You
can
PRO
change
the sound mode of DVD
(Dolby Digital, DTS,
LOGIC, etc) by pressing the AUDIO button
on
the remote
during playback.
Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used.
Each time you press AUDIO button, the sound mode of DVD is
as the following order;
changed
(II)
→→→
Dolby
Pro
Logic
II creates five full-bandwidth
from two-channel
sources.
output channels
This is done using an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds
or
tonal colorations.
For your reference
MOVIE mode:
?
The Movie mode is for
use
with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
The DVD/CD Receiver memorizes the last mode
settings
?
for each source
individually.
identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labelled with the
logo.
Dolby Surround encoded programs are labelled with
the
logo.
DTS Digital Surround discs are marked with DTS.
You
can
-
MUSIC mode:
The Music mode is for
and
provides
a
with any stereo music recordings,
deep sound space. The Music mode
use
wide and
includes controls that allow the sound to be tailored to individual
listening
tastes.
-
-
MATRIX mode:
The Matrix mode is the
the Music mode except that the
logic is turned off. It may be used to
enhance mono signals by making them seem "larger." The
Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate
"cure" for poor FM stereo reception may be simply to force the
same as
directional enhancement
audio to
mono.
3D SURROUND
This unit
can produce a 3D Surround effect, using 3D Surround
technology, which simulates multi-channel audio playback from two conventional stereo speakers instead of the five
or more speakers normally required to listen to multi-channel
Sound
audio from
a
encoded with
14
home theatre. This feature works with DVD discs
Dolby
Pro
Logic
and
Dolby Digital
audio tracks.
otes
When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling
frequency).
Sound Mode is not
applicable
when
headphone
is used.
Before
General
This manual
Operation (Continued)
Explanation
operating the
DVD/CD receiver. Some DVDs require specific operation or allow only limited operation during playback.
When this occurs, the symbol
appears on the TV
screen, indicating that the operation is not permitted by
gives
General
screen.
playback
1
2
is not available
on
status
can
Temporary
be displayed on the TV
changed on the menu.
Repeat Chapter
Repeat
Track
Repeat
All Tracks
Repeat
A-B
Repeat
Off
AB
OFF
Press 3/4 to select
an
an
item.
For
some
setting
functions,
setting.
Title
TRACK
Resume
during playback.
The selected item will be
number).
CHAPT
ALL
display operation
Press DISPLAY
title
of
setting
be also be used for
Feedback Field Icons
Repeat
TITLE
the disc.
can
be
(e.g.,
can
press ENTER to execute the
Display
Some items
On-screen
or
numbers
the
change
The number buttons
basic instructions for
the DVD/CD receiver
On-Screen
Press 1/2 to
3
Action
play
(non-PBC
(non-PBC
from this
prohibited
Video CDs
or
only)
Video CDs
only)
point
not available
item.
otes
highlighted.
Some discs may not
provide all of the features on the
display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
on-screen
DVD
Items
Title Number
1/3
Chapter
Number
1 /12
Time search
0:20:09
Audio
1 ENG
language
Digital Audio
Output mode
and
Subtitle
language
Angle
Sound
VCD2.0
D
5.1 CH
ABC
Shows the current title number and total number of
to the desired title number.
Shows the current
chapters, and skips
chapter number and total number
to the desired chapter number.
Shows the elapsed playing time, and
searches the point directly from the elapsed time.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
Shows the current subtitles
changes the setting.
1/1
Shows the current angle number and total number of
angles, and changes the angle number.
BYPASS
1/2,or
Numbers, ENTER
titles, and skips
OFF
Shows the current sound
changes the setting.
language, and
mode,
of
1/2,or
Numbers, ENTER, SKIP
Numbers, ENTER
1/2,or
AUDIO
1/2,or
SUBTILE
and
1/2,or
ANGLE
1/2,or
SOUND MODE
VCD1.1
Items
Function (Press 3/4 to select desired item)
Track Number
1/4
Time
0:20:09
Audio Channel
STER.
Sound
Selection Method
Function (Press 3/4 to select desired item)
BYPASS
Shows the current track number, total number of tracks
and PBC On mode, and skips to the desired track number.
Shows the
Selection Method
1 /2,or
Numbers, ENTER
elapsed playing time (Display only)
Shows the audio channel, and
changes the audio channel.
Shows the current sound
changes the setting.
mode, and
--
1
/2,or
AUDIO
1
/2,or
SOUND MODE
15
PREATION
Before
Initial
Operation (Continued)
Language
Settings
You
can set your own Personal Preferences
DVD/CD receiver.
on
the
Disc
Language
Select
DVD
language
a
for the disc's
Menu, Audio, and
Subtitle.
Initial
1
Settings
General
Operation
Press SETUP.
The
setup
menu
appears.
original language set for the disc is selected.
language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 29. If you enter the wrong language
Original
Other
:
:
The
To select another
code, press CLEAR.
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
Spanish
Code
Italian
Aspect
Menu
English
Disc Menu
French
Rating
German
TV
Polish
Spanish
Code
Italian
Aspect
Menu
Hungarian
5.1
Original
Disc Subtitle
Country
Chinese
Language
Disc Audio
Chinese
Language
Polish
Other------------
Speaker Setup
Hungarian
Others
5.1
Other------------
Speaker Setup
Others
2
Press 3/4 to select the desired item.
The
screen
selected
will show the current
item,
as
well
as
setting for the
setting(s).
alternate
Menu
Select
3
4
While the desired item is
selected, press 2, then
3/4 to select the desired
setting.
you
Language
a
see
language
Press ENTER to confirm your selection.
require additional steps.
Some items
5 setup
or
setup
menu.
Disc Audio
English
Disc Subtitle
Spanish
Disc Menu
French
Rating
German
Country
TV
Press SETUP, RETURN,
for the
This is the
menu
when you press SETUP.
Menu
PLAY to exit the
Italian
Code
Aspect
Language
menu.
5.1
Speaker Setup
Others
Picture
TV
Aspect
DVD
4:3 Letterbox: Select when
nected.
Displays
a
standard 4:3 TV is
theatrical
above and below the
images
picture.
4:3 Panscan: Select when
a
with
masking
con-
bars
conventional TV set is
connected. The video material formatted in the Pan &
Scan
style
picture are
is
played
off).
back in that
16:9 Wide: Select when
a
sides of the
16:9 wide TV is connected.
Disc Audio
4:3
Letterbox
Disc Subtitle
4:3
Panscan
Disc Menu
16:9 Wide
Rating
Country
TV
5.1
Code
Aspect
Menu
Language
Speaker Setup
Others
16
style (Both
cut
Before
Operation (Continued)
Speaker setup
5.1
Auto
Speaker settings
You
DVD
Play
can
DVD
set up the DVD/CD receiver so a DVD disc
starts playing whenever the DVD is insert-
automatically
Select
speaker settings, including volume balance and
delay time, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 26.)
ed.
If Auto
Play
will search
play
mode is set to
a
back the title
On: Auto
Off: Auto
Play
Play
On, this DVD/CD receiver
title that
playback time
automatically.
is
longest
and then
function is activated.
function is not activated.
Disc Audio
Disc Subtitle
R
Disc Menu
Country
TV
ote
Code
Volume
Play
function may not work for
some
DVDs.
Small
Distance
Language
The Auto
0 dB
Size
Aspect
Menu
R
Front L
Rating
1 ft
Test
Return
5.1
Speaker Setup
Others
Others
The
DRC, Vocal, PBC and Auto Play settings
can
be
changed.
Press 3/4 to select the desired item and press
ENTER. The setting of the selected item is changed
between On and Off.
Disc Audio
DRC
On
Disc Subtitle
Vocal
On
Disc Menu
PBC
Rating
Auto
Country
TV
Off
Code
Aspect
Menu
5.1
On
Play
Language
Speaker Setup
Others
Dynamic Range Control (DRC)
With the DVD
format, you can hear a program's soundtrack in the most accurate and realistic presentation
possible,
thanks to
digital
audio
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the
at
a
quietest ones). Then, you may
losing clarity
lower volume without
listen to
a
movie
of sound. Set
DRC to On for this effect.
Vocal
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
multi-channel karaoke
a
on
the disc will
mix into normal stereo sound.
PBC
Set
Playback
Control
(PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On
or
Off.
played according to the PBC.
played the same way as Audio
CDs.
17
PREATION
Before
Operation (Continued)
Parental Control
Rating
Movies
DVDs may contain
on
scenes
not suitable for
Therefore, discs may contain Parental Control
information that
certain
DVD
Enter the code of
DVD
children.
Code
Country
to the
applies
complete
the disc. These
scenes on
disc
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
are
TV
6
5
Rating
1
4
Code
3
Aspect
Speaker Setup
Unlock
Speaker Setup
Select
Others
using
Country
2
step
3
4
5
6 selection,
1
2
While
3
When you have not entered a password.
Enter a 4-digit password using the number buttons
"Rating"
on
the
Setup
menu
using
the
3/4 buttons.
"Rating"
3 of
to create
a
Shift the
is selected, press 2.
"Rating"
personal 4-digit security password. then
4-digit password again and
tons to confirm the
Changing
pass-
If you make a mistake before pressing ENTER, press
CLEAR and enter 4-digit security password again.
rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
4
Ratings
played. Higher
unless
an
rated
alternative
scenes
scene
same
on
rating
played
the disc.
or a
suitable alternative is found, playback will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
one.
If
will not be
is available
The alternative must have the
lower
no
Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
5
ote
This function may not work for
18
button and select the
the
1
Follow
Enter the old
3
Select
Steps
4-digit
1-2
as
is necessary when
the 4-digit code"
code
shown above to the left
(Rating).
code, then press ENTER.
Change using
3/4 buttons then press
ENTER.
4
5
Enter the
ENTER.
Enter
new 4-digit code, then press
exactly the same code a second
fy by pressing ENTER.
time and veri-
6
Press SETUP to exit the
menu.
1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
be
the 3/4 buttons.
3/4 buttons.
4-digit password
changed (see "Changing
2
a
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
using
ote
below.).
personal 4-digit security
left.
Confirmation of the
the code is
word, then press ENTER.
on
Press ENTER to confirm your country code
then press SETUP to exit the menu.
When you have already registered a password;
Enter a 4-digit password using the numbered but-
Select
using 2
using
cursor
second character
press ENTER. Enter the
press ENTER to verify.
on
Code is selected, press 2.
Select the first character
Select
the 3/4 buttons
menu.
Follow
Change
Code
Country
the setup
While
2
Language
1
5.1
Language
Others
Disc Menu
Menu
Code
Aspect
Menu
5.1
7
TV
IN
Rating
Country
8
Disc Subtitle
Country
Code Set
Disc Menu
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
were
to the list
List", page 30.).
Disc Subtitle
The Parental Control feature allows
country-dependent.
disc, referring
Disc Audio
rated
whose standards
country/area
Code
(See "Country
to
or
scenes are
a
used to rate the DVD video
some
DVDs.
If you
If you
forget your 4-digit
forget
your
password,
code
to clear the current pass-
word, follow the procedure below.
1
Press SETUP to
2
Use the Number buttons to enter the
display
the
setup
menu.
6-digit
number
"210499".
The
3
4-digit password
Enter
a new
(Rating).
code
is cleared.
as
shown above to the left
with DVD and Video CD
Operation
Playing
Playback Setup
Turn
on
General Features
DVD and Video CD
a
VCD2.0
DVD
the TV and select the video
VCD1.1
input
ote
source con-
the
1
system: Turn
input
on
the audio
system and select
Moving
Press OPEN/CLOSE to open the disc tray.
Load
When
chosen disc in the tray, with the
facing down.
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and
starts
automatically.
If
playback
press PLAY.
In some cases, the disc
menu
If
Press
playback
is
When
displayed
may be displayed first after
Video CD which offers a menu.
DVD
or
loading
a
as
more
than
(0-9)
to select
a
title, you
to
can move
title number.
a
a
title, then press ENTER.
to another CHAPTER/TRACK
title
on a
more
chapter/track
1/3
1 /12
VCD1.1
disc has
one
follows:
Press 1 2 to select
DVD
a menu screen
DVD
DISPLAY, then press the appropriate number
Moving
appear
menu screen
disc has
button
instead.
The
a
another title
does not start,
might
to another TITLE
1/3
side
3
use
connected to the DVD/CD receiver.
source
your
2 playback
otherwise, all operations described
the remote control. Some features may also be
available on the Setup menu.
nected to the DVD/CD receiver.
Audio
Unless stated
disc has
than
as
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
Press SKIP/SCAN .or >
DVD
Use the 1 234 buttons to select the
want to
view, then press ENTER
Press TITLE
or
title/chapter you
playback.
to start
MENU to return to the
menu screen.
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
Menu
setting
the
and the exact
menu screen.
operating procedures
for
using
may differ depending on the disc.
Follow the instructions on the each menu screen.
setup.
For
two-digit numbers, press
(0-9)in rapid succession.
Search
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
--
1
ote
See page
otes
"Parental
press DISPLAY. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9) or press
2 to select the chapter/track, then press ENTER.
menu
You also may set PBC to Off under
17.
--
briefly during playback
beginning of the current chapter/track
or to select the next chapter/track.
Press SKIP/SCAN . twice briefly to step back to
the previous chapter/track.
To go directly to any chapter during DVD playback,
to return to the
(see
Control",
page 18).
DVDs may have a region code.
Your receiver will not play discs that have
a region
region code
VCD2.0
VCD1.1
1 Press and hold SKIP/SCAN .
two seconds
or
> for about
during playback.
The receiver will
now
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
on
code different from your receiver. The
this receiver is 5 (five).
DVD
the numbered buttons
>
repeatedly
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
or
to select the
for
3 To return to normal
play,
press PLAY.
19
OPERATION
with DVD and Video CD
Operation
General Features
Still Picture and
VCD2.0
DVD
can
To
during playback.
advance the
pressing
A*
VCD1.1
The DVD/CD receiver will
now
go into PAUSE mode.
picture frame-by-frame by
repeatedly on the remote
AB
repeat
a
"
*
A
VCD2.0
1 Press SLOW SCAN m
on
briefly
begins ("
Time Search
title:
a
the TV
again
on
starting point.
screen.
at your chosen end
point.
the TV screen, and the repeat
appears the display window).
"
0:20:09
DVD
-:--:--
The Time Search function allows you to start
any chosen time on the disc.
during playback.
The DVD/CD receiver will enter SLOW mode.
2UsetheSLOWSCANmorMtoselectthe
1 Press DISPLAY
required speed: t 1/16, t 1/8, t 1/4 or t 1/2
(backward), or T 1/16, T 1/8, T 1/4 or T 1/2 (forward).
To return to normal play, press PLAY.
display
appears
ote
The
during playback.
the
on
on-screen
elapsed playing
time of the
current disc.
2 Within 10
seconds, press 3/4
on-screen
to select the Time
display.
The "-:--:--" appears in the Time Search box.
Slow motion
playback
in
is not
reverse
applicable
for
3 Within 10
Video CD.
the
seconds,
required
Repeat
CHAPT
DVD
VCD2.0
TITLE
TRACK
DVD Video Discs
repeat
the
the number buttons to enter
right
hours, minutes, and
in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
VCD1.1
ALL
OFF
4 Within 10
seconds, press ENTER
confirm the start time.
Repeat Chapter/Title/Off
-
use
start time. Enter
seconds from left to
currently playing chapter,
Playback
an
press
invalid
starts from the selected time
or
on
press PLAY to
the disc. If you enter
time, playback will continue from the
current
point.
REPEAT.
The
2 To
Repeat Chapter
icon appears
on
the TV
3D Surround
screen.
repeat the title currently playing, press REPEAT
VCD2.0
DVD
VCD1.1
a
BYPASS
3D SUR
second time.
The
Repeat
3 To exit
The
Title icon appears
Repeat mode,
Repeat
on
the TV
screen.
press REPEAT
Off icon appears
on
the TV
a
This unit
third time.
screen.
Video CDs
repeat
The
2 To
-
Repeat
the track
Repeat
currently playing,
on
press REPEAT.
the TV
repeat the disc currently playing, press REPEAT
The
Repeat
The
Repeat mode,
Repeat
on
the TV
a
screen.
press REPEAT
Off icon appears
on
the TV
a
third time.
screen.
ote
On
a
setup
20
Video CD with
menu
to
use
PBC, you
the
Repeat
3D Surround
must set PBC to Off
effect, which
playback
conventional stereo
instead of the five
speakers,
speakers normally required
a
from two
or
to listen to
home theater
system.
1 Press SOUND MODE to select "3D SUR"
2 To turn off the 3D Surround
MODE
All icon appears
a
during
playback.
screen.
second time.
3 To exit
produce
multi-channel audio from
Track/All/Off
Track icon appears
can
simulates multi-channel audio
more
1 To
at
playing
screen.
The Time Search box shows the
Search icon in the
1 To
VCD1.1
3 To cancel the sequence, press REPEAT A-B.
VCD1.1
M
or
briefly
appears
"A B" appears
press PLAY.
DVD
sequence in
"
sequence
Slow Motion
VCD2.0
OFF
2 Press REPEAT A-B
control.
play,
DVD
1 Press REPEAT A-B at your chosen
PAUSE/STEP
3 To return to normal
3
A-B
Repeat
Frame-by-frame playback
1 Press PAUSE/STEP
2 You
(continued)
on
function. See page 17.
the
again
effect, press SOUND
to select "BYPASS".
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
during playback
or
still
the
repeatedly,
discs: Menus
to
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
level
press the appropriate number button to select an option.
Or, use the 1 234 buttons to highlight your selection,
then press ENTER.
playback
magnification
steps.
2 Use the 1 234 buttons to
move
the zoomed
through
picture.
3 Press CLEAR to
the
normal
resume
playback
or
the contents of DVD Video
Checking
activate the Zoom function.
If you press ZOOM
increases up to six
return to
paused image.
Title Menu
DVD
1 Press TITLE.
If the current title has
screen.
ote
The Zoom function may not work for
some
2 The
DVDs.
Marker Search
VCD2.0
DVD
a
menu, the
Otherwise, the disc
list
menu can
and subtitle
3 To
menu
menu
will appear
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
remove
the
on
may appear.
again.
VCD1.1
Disc Menu
MARKER SEARCH
1/9
DVD
VCD1.1
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
(continued)
DVD
1 Press MENU.
You
can
nine
points
To enter
1
start
playback
from
memorized
a
point. Up
be memorized.
can
2 To
is
menu
displayed.
the disc menu, press MENU
remove
again.
mark, follow these steps.
a
During disc playback, press MARKER when
playback reaches the spot that you want to
Camera
Repeat step
on
the TV
briefly.
screen
1 to enter up to nine Marker
points
on a
disc.
To Recall
DVD
scenes
1/1
recorded at different
camera
angles, you can change to a different camera angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
The number of the current
Marked Scene
a
Angle
If the disc contains
memorize.
The Marker icon will appear
2
The disc
to
angle
appears
on
the TV
a
screen.
1 ENG
1
disc
During
playback,
The MARKER SEARCH
2 Within 10
press SEARCH.
menu
will appear
seconds, press 1/2
buttons to select
a
or use
on
the
screen.
the number
Marker number that you want to
recall.
3 Press ENTER.
will start from the Marked
Playback
4 To
remove
scene.
the MARKER SEARCH menu, press
Changing
1
a
During
disc
playback,
The MARKER SEARCH
2
the Audio Channel
Press AUDIO
repeatedly during playback to hear
(STER., LEFT or RIGHT).
on
the
screen.
dif-
VCD1.1
a
dif-
ferent audio channel
DVD
different subtitle
erase.
ABC
1 ENG
repeatedly during playback
languages.
to
see
the
ote
Press CLEAR.
If
The Marker number will be erased from the list.
4
VCD2.0
a
Press 1/2 to select the Marker number that you want
to
3
will appear
5.1 CH
to hear
Press SUBTITLE
press SEARCH.
menu
repeatedly during playback
language or audio track.
D
DVD
Changing
Subtitles
Marked Scene
Language
Press AUDIO
ferent audio
SEARCH.
To clear
the Audio
Repeat steps
2 and 3 to
erase
appears, the feature is not available
on
the disc.
additional Marker
numbers.
5
To
remove
the MARKER SEARCH menu, press
SEARCH.
21
OPERATION
with Audio CD and MP3 Disc
Operation
Playing an Audio CD and
Notes
The DVD/CD receiver
can
CD-ROM, CD-R
on
or
play
playing MP3 recordings,
Recordings on right.
MPEG1 audio
read the notes
on
files that have
MP3
disc and close the tray.
Audio CD; Audio CD menu appears
go to step 4.
MP3 disc; The MP3-JPEG choice
on
the TV
can
not read
file extension other than
the TV
screen.
Go to
step
menu
appears
2
MP3 Disc
compatibility
limited
follows:
1.
2.
3.
4.
2
a
an
MP3 file that
".mp3".
a
screen
on
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
The DVD/CD receiver
has
1
Recordings
An MP3 file is audio data
MP3 formatted record-
CD-RW discs.
Before
Insert
MP3
on
About MP3
MP3
CD
ings
MP3 Disc
Press 3/4 to select the MP3 then press ENTER
PLAY.
The MP3 menu appears on the TV screen.
Press RETURN to move to the MP3-JPEG choice
or
menu.
as
Sampling Frequency / only at 44.1kHz
Bit rate / within 32 320kbps
CD-R physical format should be "ISO 9660"
If you record MP3 files using the software which
cannot create a FILE SYSTEM, for example "DirectCD" etc., it is impossible to playback MP3 files. We
recommend that you use "Easy-CD Creator", which
-
creates
5.
with this receiver is
A
single
an
ISO9660 file
session disc
track. If there is
not
no
system.
requires
MP3 files in the first
MP3 file in the 1st
MP3 files. If you wish to
format all the data in the disc or
playback
files,
track, it
can-
playback
MP3
use a new
one.
6.
File
names
and must
should be named
incorporate ".mp3"
using
8 letters
or
less
extension
e.g. "********.MP3".
3
Press 3/4 to select a folder, and ENTER
A list of files in the folder appears.
4
Press 3/4 to select
ENTER.
Playback starts.
During playback,
a
or
the current track's
Audio CD
move
menu
or
elapsed playing
menu.
to the next page.
move
Press MENU to
to the
previous
MP3
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
requires discs/recordings to meet
optimal
playback quality. Pre-recorded DVDs are automatically
certain technical standards in order to achieve
set to these standards. There
menu
Program
TRACK03
Customers should also note that
be
TRACK04
TRACK05
TRACK06
TRACK07
Clear All
STER.
BYPASS
ip
If you
list,
are
use
in
To
22
file list and want to return to the Folder
the 3/4 to
return to the
5
a
and
highlight
previous menu screen.
stop playback
many different types
(including CD-R containing
MP3 files). That require certain pre-existing conditions
(see above) to insure compatible playback.
permission
is
in order to download MP3 files and music
from the Internet. Our company has no right to
grant such permission. Permission should always
TRACK02
0: 56: 18
are
of recordable disc formats
page.
TRACK01
TRACK08
the disc should be less than
This DVD/CD receiver
required
CD
on
650.
track then press PLAY
time will appear on the display window and
Playback will stop at the end of the disc.
Press TITLE to
PLAY.
7.
at any other
press ENTER to
time, press STOP.
sought
from the
copyright
owner.
Operation
Pause
with Audio and MP3 Disc
3D Surround
MP3
CD
1 Press PAUSE/STEP
during playback.
2 To return to
ENTER
Moving
to another Track
In
>
to go to the next track.
of audio
CD,
the track number
briefly
to
step
back to
directly to any track, enter
the numbered buttons (0-9)
to go
using
during playback.
a
3D Surround
effect, which
playback
from two
conventional stereo
speakers, instead of the
speakers normally required to listen to
five
more
multi-
a
home theater
or
system.
OPERATION
during
playback.
2 To turn off the 3D Surround
MODE
again
effect, press SOUND
to select "BYPASS".
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear a
(STER., LEFT, or RIGHT).
CD
different audio channel
Repeat Track/All/Off
1 To
produce
track.
previous
case
can
simulates multi-channel audio
channel audio from
MP3
CD
briefly during
beginning of the current
or
to return to the
Press SKIP/SCAN . twice
the
or
CD
1 Press SOUND MODE to select "3D SUR"
playback
or
This unit
press PLAY, PAUSE/STEP
playback,
again.
Press SKIP/SCAN .
track
(Continued)
MP3
CD
repeat the track currently playing, press REPEAT.
The
Repeat
icon and "TRACK" appears
the
on
menu
screen.
2 To
repeat all tracks
disc, press REPEAT
on a
a sec-
ond time.
The
Repeat
3 To cancel
The
icon and "ALL" appears
Search
icon and "OFF" appears
1 Press and hold SKIP/SCAN .
two seconds
during playback.
The
now
will
the
on
a
third time.
menu screen.
MP3
CD
player
menu screen.
press REPEAT
Repeat mode,
Repeat
the
on
> for about
or
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
or > repeatedly
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
to select the
Search
speed
and direction
are
indicated
on
the
menu
screen.
3 To return to
Repeat
To
1
repeat
A-B
a
CD
sequence.
During disc playback,
sen starting point.
The
Repeat
icon and "A
2 Press REPEAT A-B
The
press PLAY.
playback,
Repeat
press REPEAT A-B at your cho*
"
appears
the
on
menu screen.
at your chosen end point.
icon and "A B" appears on the menu screen,
and the sequence
again
begins
to
play repeatedly.
3 To exit the sequence and return to normal
REPEAT A-B again.
The
Repeat
icon and "OFF" appears
on
the
play,
press
menu screen.
23
Operation
Viewing
with JPEG Disc
JPEG disc
a
Press SKIP/SCAN .
This DVD/CD receiver
play discs with JPEG files
and Kodak picture CD. Before playing JPEG recordings,
read the notes on JPEG Recordings on right.
1
Insert
a
to another File
Moving
JPEG
can
menu
appears
on
the TV
during
The DVD/CD receiver will
2 To return to the slide
screen.
PAUSE/STEP
To
the
flip
horizontally
Press 3/4 to select the JPEG then press
ENTER.
The JPEG
menu
on
appears
the TV
or
To rotate
screen.
or
to the
viewing a
previous file.
Press 1/2
Notes
Depending
or
press
picture
showing
vertically.
to
picture
a
the
flip
picture
picture
during showing
on
go into PAUSE mode.
again.
clockwise
picture
slide show.
now
show, press PLAY
Press 3/4 while
2
while
once
Still Picture
1 Press PAUSE/STEP
disc and close the tray.
The MP3-JPEG choice
>
or
to advance to the next file
picture
or
a
picture
to rotate the
counterclockwise.
JPEG
Recordings
upon the size and number of the JPEG
a long time for the DVD/CD receiv-
files, it could take
3
Press 3/4 to select a folder, and press ENTER or
PLAY.
A list of files in the folder appears.
Press RETURN to move to the MP3-JPEG choice
menu.
er
to read the disc's contents. If you don't
---
Total number of files and folders
list,
are
use
"
"
on
in
file list and want to return to the Folder
a
the 34 buttons
on
the remote to
highlight
Some disc may be incompatible due to different
recording format or condition of disc.
When you are using software such as
Creator" to burn the jpeg files into the
and press ENTER to return to the
previous
menu screen.
that all the selected files have the
If
want to view
you
4 highlight
a
particular file, press
file and press ENTER
the file proceeding starts.
a
Press TITLE to
move
3/4 to
PLAY.
or
Viewing
During viewing a file, press RETURN
the previous menu (JPEG menu).
when
copying
rename
to
move
Press MENU to
to
to the next page.
move
to the
viewing
Slide
previous
page.
ip
There
are
three
Speed options: Fast,
to highlight the Slide
select the option you want to
Normal, Slow, and Off. Press 1/2
Speed
then press 3/4 to
use, and press ENTER.
To
stop viewing
The JPEG
24
menu
at any other
appears.
into the CD
"Easy
CD
CD-R,
ensure
".jpg"
extensions
layout.
If the files have
File
them
names
time, press STOP.
".jpe" or ".jpeg" extensions, please
as ".jpg" files.
without
be read
by
files
shown
are
explorer.
5
the disc should
be less than 650.
ip
If you
see an on-
display after several minutes, some of the files
are too big
reduce the resolution of the JPEG files
to less than 2 mega pixels and burn another disc.
screen
".jpg"
extension will not be able to
this DVD/CD receiver. Even
as
JPEG
image
though
the
files in windows
Programmed Playback
Programmed Playback
CD
VCD2.0
with Audio CD
ote
function enables you to store your
favourite tracks from any disc in the player memory.
Program
Program
mode to enter the
The
during playback or in
Program Edit mode.
E
mark will appear to the right of the word
the right side of the menu screen.
on
On
a
Video CD with
setup
menu
to
use
must set PBC to Off
PBC, you
the
on
the
function. See page 17.
Program
contain 30 tracks.
can
Press PROGRAM
1
with Video CD
Programmed Playback
and MP3 Disc
The
MP3
VCD1.1
the stop
Program
OPERATION
Insert Video CD and close the tray.
1
2
Press PROGRAM while
The VCD
Program
menu
playback
is
stopped.
will appear.
Program
VCD
E
TRACK 1
TRACK 2
ote
TRACK 3
Press PROGRAM to exit the
Program
Edit
TRACK 4
mode;
TRACK 5
TRACK 6
E
the
mark will
Select
2
disappear.
TRACK 7
track, then press ENTER
a
selected track
the
on
Clear All
TRACK 8
Program
to
place
the
list.
ote
2 to
Repeat step
Program list.
3
place
on
the
Press
RETURN, PROGRAM
or
PLAY to exit the
Program
menu.
E
Program
CD
additional tracks
TRACK 1
TRACK 12
TRACK 2
TRACK 8
TRACK 3
TRACK 10
TRACK 4
TRACK 3
3
Follow
steps 2-6 of "Programmed Playback with
Audio CD and MP3 disc"
on
left.
TRACK 5
To
TRACK 7
Clear All
TRACK 8
0: 56: 18
STER.
normal
BYPASS
resume
"PROG." indicator
Audio CD
MP3
menu
disappears
Press 2.
The
programmed
track you selected last is
highlighted
on
the program list.
Press 3/4 to select the track you want to start
Press PLAY
or
7
resume
playback,
REPEAT
all of the tracks
normal
select
a
on
the
Program
list
Erasing
a
icon and "ALL" appears
on
Track from
only)
or
on
the TV
on
Program
screen.
list, press
the TV
press REPEAT
icon and "OFF" appears
1 Press PROGRAM
MP3 disc
on
Repeat mode,
Repeat
ENTER to start.
the program
second time.
a
Repeat
The
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback stops after
have played once.
window.
Tracks
icon and "TRACK" appears
Repeat
repeat all tracks
To cancel
move
6 Playback begins
display
repeat the track currently playing, press REPEAT.
The
to the next page.
Press MENU to move to the previous page.
To
To
The
To
5 playing.
Press TITLE to
in the
menu
Repeat Programmed
4
from
playback
4 programmed playback,
press PROGRAM.
TRACK 6
screen.
a
the TV
third time.
screen.
List
during playback (Audio CD and
to enter the Program Edit
stop
mode.
playback
track of
from
programmed
CD (or MP3) list and
then press ENTER or PLAY.
"PROG." indicator disappears in the display
window.
E
The
mark will appear.
2 Press 2 to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
erase
4 Press CLEAR.
The track will be erased from the
Erasing
1 Follow
List"
as
the whole
steps
1-2 of
Program
"Erasing
a
list.
List
Track from
Program
above.
2 Use 3/4 to select "Clear
The
Program
complete Program
The programs
are
All", then press ENTER.
for the disc will be erased.
also cleared when the disc is removed.
25
Additional Information
Speaker Setup
Adjust
the
following settings
for the built-in 5.1 channel
Last Condition
surround decoder.
DVD
CD
Memory
VCD1.1
Disc Audio
This DVD/CD receiver memorizes the
Disc Subtitle
R
Disc Menu
Code
Volume
Menu
0 dB
Size
Aspect
switch off the
player. If you load a disc that
tings memorized, the latest stop position is
ly recalled.
Small
Distance
Language
user
settings
for
the last disc that you have viewed. Settings remain in
memory even if you remove the disc from the player or
Front L
Rating
Country
TV
R
1 ft
Test
has its setautomatical-
Return
5.1
Speaker Setup
otes
Others
--
--
1
Select "5.1
Speaker Setup" using
buttons
the setup
2
While "5.1
on
the 3/4
Settings are stored in memory for use any
This player does not memorize settings of
you switch off the DVD/CD receiver before
mencing to play it.
menu.
System
Press 2 buttons to select the desired
speaker.
You must select the
TV
341 2 buttons.
Select
appropriate system mode for your
system. If NO DISC appears in the display window,
press and hold PAUSE/STEP on the front panel for
more than 5 seconds to be able to select a system
(PAL, NTSC,
Speaker
Select
selection
or
AUTO).
When the selected
that you want to
speaker
adjust. ((Front speak(Left), Front speakers (Right), Centre Speaker, Rear
speakers (Left), Rear speakers (Right), Subwoofer))
a
ers
system does not coincide with the
system of your TV, normal colour picture may not be
displayed.
AUTO:
Select when DVD/CD receiver is connected
with Multi
NTSC:
ote
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Press 1 / 2 to
PAL:
adjust the output
+6dB)
level of the selected
~
Size
Since the
speaker settings
settings.
fixed, you
are
cannot
change
Distance
If you connected speakers to your DVD/CD receiver,
setting the Distance lets the speakers know how far the
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
listener at the
same
time.
(1
ft
=
30.48
cm)
ote
You
can
not set the distance of subwoofer
speaker.
Test
Press ENTER to test the
Adjust
signals
of each
speaker.
signals
the volume to match the volume of test
memorized in the
Front Left
Rear Left
(L)
(L)
system.
→
→
Front
Rear
Right (R)
Right (R)
→
Centre
→
Subwoofer
→
Return
Press ENTER to return to the
26
with NTSC-TV.
Dolby
Volume
the
system TV.
Select when DVD/CD receiver is connected
Select when DVD/CD receiver is connected
with PAL-TV.
speaker. (-6dB
disc if
com-
is selected, press 2
Speaker Setup"
button.
3
4 Adjust options by using
time.
a
previous
menu.
with Radio
Operation
Presetting
You
can
ing,
make
that you have turned down the volume.
Press BAND
1
on
the remote control until FM
AM appears in the
2
3
display
or
window.
or
appear in the
stereo
(for
Press PRESET +/-
repeatedly
to select the pre-
set station you want.
the volume
by rotating VOLUME on the
by pressing VOLUME + or on the
control repeatedly.
3 Adjustpanel
front
a
remote
program)
window.
display
play
FM appears in the dis-
or
window.
one
then
when the DVD/CD Receiver tunes in
station. "TUNED" and "STEREO"
Press BAND until AM
Each time you press the button, the DVD receiver tunes in
preset station at a time.
until the
release.
Scanning stops
1
2
on
panel for about two seconds
frequency indication starts to change,
the front
Preset radio stations in the DVD/CD receiver's memory
(see "Presetting radio stations" on the left).
first
The last received station is tuned in.
And then every time you press BAND, FM and
AM changes alternately.
Press and hold TUNING
to the radio
Listening
30 stations for FM and AM. Before tun-
preset
sure
the radio stations
or
-
To turn off the radio
Press POWER to turn the DVD/CD receiver off
another function mode
ote
"TUNED"
appears when the
only
signal
on
the front
Use manual
panel.
For manual
preset number will flash in the display window.
the front
on
Press TUNING
5 panel
or
to select the
on
the front
preset number you
or
For automatic
want.
7
Press MEMORY
on
the front
panel again.
to 6 to store other stations.
To select
You
To tune in
station with
a
Press TUNING
a
weak
to tune in the station
signal
repeatedly
or
in
step
3
manually.
To clear all the stored stations
Press and hold MEMORY for about two seconds and
"CLEAR ALL" is
appeared in the display window and
MEMORY again, the stations are cleared.
If you have accidentally entered into the "CLEAR
ALL" mode and you do not wish to clear the memory,
do not press any key. After a few seconds, the
"CLEAR ALL"
display
will go off
by
itself and
tuning
in
step
2.
tuning,
or
press and hold TUNING
for about two seconds
on
the front
change
preset radio station directly
a
can use
to select
then press
select
panel.
The station is stored.
Repeat steps 3
automatic
tuning, press TUNING
panel repeatedly.
or
6
or
AUX).
To listen to non-preset radio stations
Press MEMORY
A
or
is FM and
STEREO.
4
(CD/DVD
the number buttons
on
the remote control
preset radio station directly.
For example, to listen to preset station 4, press 4 on the
remote control. To listen to preset station 19, press 1
then 9
a
(within
3
seconds).
For your reference
If an FM program is
noisy
Press MONO/STEREO.
panel so that
display window. There
will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
"STEREO"
disappears
on
the front
in the
effect.
To
improve reception
supplied antennas.
Reorient the
to normal mode.
ote
If all stations have
already
been
entered, the FULL
message will appear in the display window for
moment and then a preset number will flash.
To
change
the
preset number, follow the steps
a
5-6
as
above.
27
OPERATION
with Radio
Operation
Timer
Sleep
You
can
cally
1
at
Dimmer
Setting
set the DVD/CD receiver to turn off automati-
a
specified
The SLEEP indicator and
sleep
sleep
time.
time appears in the dis-
window.
Each time you press SLEEP the
in the following order.
setting changes
SLEEP 90→80→70→60→50→40→30→20→10→
OFF
can
check the time
remaining
before the
DVD/CD receiver turns off.
Press SLEEP. The
display
28
on
Press the
change the brightness of the display
panel during in power-on status.
DIMMER repeatedly.
the front
Mute
Press MUTE to mute your unit.
can mute your unit in order, for
You
the
telephone,
window.
remaining
time appears in the
to
example,
"MUTE" indicator flashes in the
answer
display
window.
Using Headphone
ote
You
This function will
window
time.
Press SLEEP to set the desired
play
2
(Continued)
Connect
a
stereo
Jack
headphone plug ( 3.5mm)
into the
PHONES connector.
The
plug
speakers are automatically disconnected
in a headphone (not supplied).
when you
Language Code
Enter the
(See
appropriate
16).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
REF NC
29
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
18).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Barbuda
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
Coast
IN
India
NU
Niue
IO
British Indian Ocean
NZ
New Zealand
US
United States
Uruguay
Kingdom
Outlying
CI
Ivory
CK
Cook Islands
CL
Chile
Territory
OM
Oman
UY
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
JP
Japan
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
Saint Pierre and
VN
Vietnam
Cyprus
KG
Kenya
Kyrgyzstan
PM
CY
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DE
Verde
Anguilla
Islands
Miquelon
City
Grenadines
Islands
Islands
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
30
Republic
Islands
(French)
State
(British)
(USA)
Troubleshooting
Check the
following guide
for the
possible
of
cause
a
before
problem
contacting
Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
The power is on, but
the DVD/CD receiver
?
No disc is inserted.
?
Plug the power cord
wall outlet.
securely
Insert
that the DVD or,
a
disc.
(Check
?
The TV is not set to receive DVD
signal
?
output.
Select the
on
the TV
?
The video cable is not connected
?
securely.
no
appropriate video input mode
the picture from the DVD/
sound
or
The connected TV power is turned off.
?
Turn
The
?
Select the correct
connected with the
equipment
audio cable is not set to receive DVD
The audio cables
not connected
are
playback picture
is poor.
does not start
the TV.
?
input
mode of the
so
Connect the audio cable into the
jacks
securely.
The power of the equipment connected
with the audio cable is turned off.
?
?
The audio
?
Replace
?
The disc is
?
Clean the disc.
?
No disc is inserted.
?
jacks
you can hear the
sound from the DVD/CD receiver.
securely.
The DVD/CD receiver
on
audio receiver
signal output.
?
screen.
Connect the video cable into the
?
a
the TV
on
securely.
?
very low-level
sound is heard.
The
is
so
CD receiver appears
only
display
lit.)
picture.
There is
into the
audio CD indicator in the DVD
does not work.
No
service.
connecting cable
is
damaged.
dirty.
Turn
on
the
equipment
connected with
the audio cable.
?
Insert
a
it with
disc.
new one.
(Check
that the
DVD,
audio CD indicator in the DVD
playback.
or
display
is
lit.)
?
An
disc is inserted.
unplayable
?
Insert
a
playable
disc.
the disc
(Check
type, colour system and Regional code.)
?
The disc is
placed upside
down.
?
Place the disc with the
playback
side
down.
?
The disc is not
placed
within the
guide.
?
Place the disc
inside the
?
The disc is
?
A
menu
is
dirty.
on
the TV
?
?
screen.
on
the disc
tray correctly
guide.
Clean the disc.
Press the SETUP button to turn off the
menu screen.
?
The
Rating
level is set.
?
Cancel the
the
Loud hum
or
noise is
?
The
plugs
and
jacks
are
dirty.
?
rating
Wipe
function
Rating
or
change
level.
them with
a
cloth
slightly
mois-
tened with alcohol.
heard.
?
The disc is
?
The
dirty.
and
speakers
components
poorly.
?
are
?
connected
?
The DVD/CD receiver is located too
close to the TV.
Clean the disc.
Connect the
speakers
and
components
securely.
?
Move your TV away from the audio
components.
31
REF NC
Troubleshooting (Cont'd)
Cause
Symptom
Radio stations cannot
?
The antenna is
Correction
positioned
or
connected
poorly.
be tuned in.
?
Connect the antenna
?
Adjust
securely.
the antennas and connect
an
external antenna if necessary.
?
?
The
of the stations is too
weak
in with automatic
signal strength
(when tuning
tuning).
No stations have been
preset
or
preset
?
Tune in the station
manually.
?
Preset the stations
(page 27).
stations have been cleared
(when
tuning by scanning preset stations).
The remote control
does not work
?
The remote control is not
remote
properly.
?
sensor
pointed
at the
?
of the DVD/CD receiver.
The remote control is too far from the
?
DVD/CD receiver.
?
There is
an
obstacle in the
Point the remote control at the remote
sensor
Use the remote control within about 23
ft
path
of the
of the DVD/CD receiver.
(7 m).
?
Remove the obstacle.
?
Replace
remote control and the DVD/CD
receiver.
?
The batteries in the remote control
flat.
32
are
the batteries with
new ones.
Specification
Power
Power
[Genral]
Refer to back label
Mass
External dimensions
[CD/VD]
[Video]
AM
[MW]
(W
x
H
x
D)
kg
360
x
82
x
Laser
Semiconductor
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
PAL
Designs
35°C, Operation
More than 75 dB
Video
1.0 V
laser, wavelength
625/50, NTSC 525/60
status: Horizontal
650
REF NC
nm
100 Hz to 18 kHz
(1 kHz, NOP,
20 kHz
LPF/A-Filter)
More than 65 dB
(1 kHz, at 12W position) (20 kHz LPF/A-Filter)
(p-p), 75 Ω, negative sync., RCA jack
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x
(C) 0.3 V (p-p), 75 Ω
1.0 %
output
output
87.5
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
108.0 MHz
-
o
65.0
-
74.0
MHz,
87.5
-
1
108.0 MHz
10.7 MHz
55 dB
150
522
-
-
(Mono)
10,000 Hz
1,611 kHz
o
530
-
1,610 kHz
450 kHz
Stereo mode
20W+20W(4Ωat1kHz,THD10%)
Front: 20W + 20W (THD 10 %)
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Centre*: 20W
Outputs
S-VIDEO
Surround*: 20W
20W
+
Subwoofer*: 40W
(8Ω
(4Ω
at 30
kHz, THD 10 %)
Hz, THD 10 %)
at 1
MONITOR
PHONES:
[Suplied Acesori ]
mm
5°C to
5% to 85%
Satellite
[Speakrs]
344
Temperature:
Surround mode
[Amplifer]
5.9
Operating conditions
Operating humidity
S-video
[FM]
[Tuer]
Refer to back label
supply
consumption
1
Type
Impedance
Frequency Response
Way
1
Speaker
-
1
Way
(1m)
20W
H
x
D)
1
(LHS-D6230W)
Speaker
8Ω
20,000 Hz
83 dB/W
Rated
x
Passive Subwoofer
4Ω
130
Sound Pressure Level
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
(32 Ω, 22mW)
Speaker (LHS-D6230T)
50
-
1,500 Hz
82 dB/W
(1m)
40W
40W
80W
88x100x95mm
160x350x325mm
0.54
kg
4.12kg
?Speakers...........................6?Speakercables......................5
?Remotecontrol......................1?Batteries(AAA).......................2
?AMloopantenna.....................1?FMantenna.........................1
?Videocable.........................1
and
specifications
are
subject
to
change
without notice.
33
P/N: 3828R-D030U
Download PDF

advertising