LG | LH-D6245A | LG LH-D6245A Owner’s Manual

LH-D6245A JA5SALS
DVD/CD RECEIVER
OWNER'S MANUAL
MODEL: LH-D6245
(Main Unit: LH-D6245A,
Speakers: LHS-D6245T, LHS-D6245W)
CD-R/RW
Before
connecting up, operating
repairing this product,
booklet carefully and completely.
please
read this instruction
or
Precautions
Safety
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
This
shock to persons.
The exclamation mark within
is intended to alert the
user
an
equilateral triangle
to the presence of
important operating and maintenance (servicing)
instructions in the instructions accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
WARNING: Do not install this equipment in
such as a book case or similar unit.
a
confined space
CAUTION:
This DVD/CD receiver
To
ensure
proper
use
employs
of this
a
Laser
System.
product, please read this owner's
carefully and retain it for future reference. Should the
unit require maintenance, contact an authorized service location (see service procedure).
manual
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
vases, should be
placed
on
the apparatus.
OTES ON COPYRIGHTS:
It is forbidden
by law to copy, broadcast, show, broadcast
via cable, play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
SERIAL NUMBER: The serial number is located
on
the back
of this unit. This number is
unique to this unit and not available
to others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
2
___________________________________
___________________________________
Table of Contents
Audio CD and MP3/WMA Disc
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
BeforeUse..............................4-5
PlayableDiscs...........................4
Precautions.............................5
NotesonDiscs..........................5
AboutSymbols..........................5
Front Panel Controls and Display Window
Indicators.................................6
RemoteControlOverview....................7
RearPanelConnections.....................8
Operation
PlayingAudioCDsorMP3/WMADiscs
NotesonMP3/WMARecordings.
.
.
.
.
.
.
.
22-23
.
.
.
.
.
.
.
.
.
.
.
.
.
.22
.22
Pause.............................23
SelectingTracks.....................23
RepeatTrack/All/Off...................23
Search.............................23
RepeatA-B.........................23
3DSurround........................23
AudioChannelSelection...............23
JPEGFileOperation.......................24
ViewingJPEGFiles......................24
SelectingFiles.......................24
StillPicture.........................24
Preparation
Connections............................9-13
FlippingthePicture...................24
RotatingthePicture...................24
AM-FMAerialConnections..................9
NotesonJPEGFiles..................24
TVConnection..........................10
ProgrammedPlayback.....................25
Audio CD and MP3/WMA Disc Programmed
Playback..............................25
.25
VideoCDProgrammedPlayback.
SpeakerSetup............................26
.11
ExternalEquipmentConnection.
.12
SpeakerSystemConnections.
SpeakerPlacement......................13
BeforeOperation.......................14-18
Mini Glossary for Audio Stream & Surround
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Mode.................................14
SoundMode...........................14
GeneralExplanation......................15
On-ScreenDisplay.......................15
InitialSettings........................16-18
InitialSetup.........................16
Language..........................16
.
.
.
.
.
.
.
.
.
.
AdditionalInformation.....................26
LastConditionMemory...................26
SystemSelect..........................26
RadioOperation........................27-28
Presettingtheradiostations................27
Listeningtotheradio.....................27
SleepTimerSetting......................28
Dimmer...............................28
Picture.............................16
Mute.................................28
SpeakerSetup.......................17
UsingHeadphoneJack...................28
Others.............................17
ParentalControl......................18
Operation
.19-21
DVDandVideoCDOperation
DVDandVideoCDPlayback...............19
.
.
.
.
.
.
.
.
.
.
.
.
Reference
LanguageCodeList.......................29
CountryCodeList.........................30
Troubleshooting........................31-32
Specification.............................33
GeneralFeatures........................19
TITLESelection......................19
CHAPTER/TRACKSelection.
.
.
.
.
.
.
.
.
.
.
.19
Search.............................19
Still Picture and
Frame-by-Frame Playback
.
20
About the
symbols
for instructions
Indicates hazards
itself
or
other
likely to cause
material damage.
harm to the unit
SlowMotion.........................20
Repeat............................20
RepeatA-B.........................20
TimeSearch........................20
3DSurround........................20
Zoom..............................21
MarkerSearch.......................21
SpecialDVDFeatures....................21
TitleMenu..........................21
DiscMenu..........................21
CameraAngle.......................21
AudioLanguageSelection..............21
AudioChannelSelection...............21
Subtitles...........................21
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
Manufactured under license from Dolby Laboratories. "Dolby",
"Pro Logic", and the double-D symbol are trademarks of Dolby
Laboratories. Confidential
Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and
other worldwide patents issued and pending. "DTS" and "DTS
Digital Surround" are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2000 Digital Theater Systems,
Inc. All rights reserved.
3
INTRODUC
Before Use
Disc-related terms
Discs
Playable
Title
DVD
The main film content
(8cm/12cmdisc)
or
(VCD)
(8cm/12cmdisc)
you to locate it
Audio CD
(8cm/12cmdisc)
can
play
DVD±R, DVD±RW,
a
Kodak PICTURE CD and CD-R
audio titles, MP3, WMA
or
or
CD-RW that contains
JPEG files.
--
--
accompanying
feature content
enabling
easily.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
(Video CD and audio CD only)
Sections of a picture or a musical piece on a video CD
or an audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
Track
otes
--
or
additional feature content, or music album.
Each title is assigned a title reference number
Video CD
In addition, this unit
(DVD only)
Depending
the conditions of the
recording equipment or the CD-R/RW (or DVD±R, DVD±RW) disc
itself, some CD-R/RW (or DVD±R, DVD±RW) discs
cannot be played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
on
Scene
On
video CD with PBC
(Playback control) functions,
moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
you to locate the scene you want.
A scene is composed of one or several tracks.
otes on DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
other functions may be added.
Make sure to also refer to the instructions
or
supplied
with
the DVDs and Video CDs. Some DVDs made for business
purposes may not be able to be
played
on
of video CDs
are
two
types of video CDs:
Video CDs
equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
with the
functions, or other
typical computer-like operations. Moreover, still pictures
high
system via
resolution
menus, search
can
be
played
if
they
are
included in
the disc.
Regional
Video CDs not
code of the DVD/CD receiver and DVDs
This DVD/CD receiver is
tured for
playback of
software. The region
designed and manufacregion "5" encoded DVD
code
on
the labels of
some
5
DVDs indicates which type of player can play
those discs. This unit can only play DVDs labeled "5"
"ALL". If you
or
any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVDs that have no region code label may still be
4
There
of
the
unit.
subject
Types
try
to
play
to area restrictions and therefore not
playable.
equipped
with PBC
(Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Before Use
(Continued)
Storing
Precautions
After
the unit
Handling
shipping the unit
The original shipping carton and packing materials may
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be disturbed during playback. In this case, position
When
the unit away from the TV, VCR,
unit after removing the disc.
To
near
radio,
or
turn off the
use
volatile
such
liquids,
as
leave marks
Cleaning
use a
there may be a considerable temperature
increase inside the car.
light,
as
Cleaning
discs
Fingerprints
or
and dust
the disc
on
reduce sound
with
a
clean
Before
quality.
cloth. Wipe
distort the
can
playing,
picture
clean the disc
the disc from the centre out-
wards.
on
insecticide spray,
or
NO
the unit
Do not
soft, dry cloth. If the surfaces
soft cloth
lightly
solution. Do not
benzene,
YES
the surface.
To clean the cabinet
a
store the disc in its case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
plastic products in
long period of time. They will
the unit. Do not leave rubber
contact with the unit for a
Use
playing,
the exterior surfaces clean
keep
Do not
or
discs
or
use
thinner,
are
moistened with
a
extremely dirty,
mild detergent
strong solvents such
as
these
as
might damage
alcohol,
the surface
strong solvents such as alcohol, benzene,
thinner, commercially available cleaners, or anti-static
use
spray intended for
About
records.
vinyl
Symbols
of the unit.
About the
To obtain
clear
a
picture
The DVD/CD receiver is
a
high-tech, precision
device. If
the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
"
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Disc
get
playback side of the disc.
by the edges so that fingerprints
VCD1.1
Do not touch the
on
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
following symbol is
represented by the symbol.
one
to the disc
of the
DVD.
Video CDs with the PBC
(playback control)
function.
Handling
Hold the disc
on
A section whose title has
applicable only
Notes
symbol display
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG files
on a
disc.
5
INTRODUC
Front Panel Control and
Window Indicators
Display
STANDBY/ON
OPEN/CLOSE
VOLUME
STANDBY indicator
FUNCTION/
Lights red when the receiver
is in Standby mode (off).
PLAY
controller
DISPLAY
Window
DISC
Remote
Tray
sensor
MONO/STEREO/
PAUSE/STEP
MEMORY/STOP
TUNING
(DOWN/UP)/
SKIP/SCAN
Indicates current
Indicates current
surround mode
or
PHONES
connector
chapter
track number
Indicates current
audio stream
Repeat playback
Indicates current
player function:
Playback, Pause,
MEMORY
indicator
mode indicators
TUNED indicator
etc.
STEREO indicator
Programmed
playback active
Indicates current title number
MUTE indicator
ANGLE active
SLEEP indicator
DVD DVD disc loaded
VCD Video CD loaded
SVCD
Super
Video CD loaded
MP3 MP3 disc loaded
6
Total
playing time/Elapsed time/
Frequency/Sleep time/Surround
mode/Volume etc. indicators
Remote Control Overview
POWER
OPEN/CLOSE
(p. 19)
FUNCTION SELECTOR
Yo u
also select the desired
can
function with the FUNC./PLAY
the front
on
panel.
Press and hold down this button
about 3 seconds, then press
repeatedly to select other function.
NUMBER
SLEEP
(p. 28)
SUBTITLE
PRO LOGIC II
(p. 21)
(p. 14)
AUDIO
(p. 14)
SOUND (p. 14)
SETUP (p. 16)
RETURN
(p. 19)
DISPLAY
(p. 15)
ENTER
TITLE
ARROW
For
use
on a
GUI
in
highlighting
menu screen,
a
Use the TITLE button to
display the title screen included
on DVD video discs.
selection
TITLE and
MENU
(p. 21)
screen.
SLOW SCAN
MENU (p. 21)
Use the MENU button to display
the menu screen included on DVD
video discs.
(Q
/
R)
(p. 20)
VOLUME
(+/-)
PRESET(+/-) (p. 27)
SKIP/SCAN
STOP
PAUSE/STEP
(p. 20)
MUTE
PLAY
MARKER(p.
SEARCH (p.
ANGLE (p.
ZOOM (p.
Remote Control
DIMMER
Remote control
sensor
and press
battery
(p. 28)
installation
Remove the
the buttons.
battery
cover on
the
rear
of the remote control, and insert two
(7 m)
from the front of the
R03
(size AAA) batteries
aligned correctly.
remote sensor
Angle:
(p. 28)
(p. 25)
CLEAR (p. 21)
REPEAT (p. 20, 23)
REPEAT A-B (p. 20, 23)
Operation Range
Distance: About 23 ft
) (p. 19)
/
PROGRAM
21)
21)
21)
21)
Point the remote control at the remote
(
with
and
About 30° in each direction in front of the remote
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
INTRODUC
Rear Panel Connections
SPEAKER Connectors
FM 75Ω Antenna Connector
AUXILIARY INPUT Connectors
S-VIDEO OUT
Connector
COMPONENT
VIDEO OUT
S/VIDEO OUT
MONITOR OUT
PROGRESSIVE
SCAN
MONITOR OUT
Connector
AM Antenna Connectors
POWER CORD
COMPONENTVIDEO OUT /
PROGRESSIVE SCAN
(Y
Pb
Terminals
ConnecttoaTVwithYPbPr
inputs.
Do not touch the inner
panel. Electrostatic
damage to the unit.
8
pins of the jacks on the rear
discharge may cause permanent
Pr)
Connections
AM-FM Aerial Connections
Connect the
supplied FM/AM aerial for listening to the radio.
Connect the AM loop aerial to the AM aerial connector.
Connect he FM wire aerial to the FM aerial connector.
FM Wire aerial
AM
Loop
aerial
PREATION
(supplied)
(supplied)
COMPONENT
VIDEO OUT
S/VIDEO OUT
MONITOR OUT
PROGRESSIVE
SCAN
otes
To prevent noise pickup, keep the AM loop aerial away from the DVD/CD receiver and other components.
Be sure to fully extend the FM wire aerial.
After
connecting the
FM wire
aerial, keep it
as
horizontal
as
possible.
9
Connections
(Continued)
TV Connections
Make
of the
following connections, depending
capabilities of your existing equipment.
the
one
ips
Depending
on
Progressive Scan (ColorStream
If your television is
your TV and other equipment you wish
to connect, there are various ways you could connect
the DVD/CD receiver. Use one of the connections
described below.
best connections.
Caution
--
Make
sure
the DVD/CD receiver is connected
to the TV. Select the correct AV
--
a
Connect the COMPONENT VIDEO OUT/ PROGRESSIVE
SCAN
jacks from the DVD/CD player to the
ding in jacks on the TV using an optional Y
(C).
corresponPb Pr cable
directly
your TV.
Do not connect your DVD/CD receiver to TV via your
VCR. The DVD image could be distorted by the copy
input
connection
high-definition or "digital ready"
television, you may take advantage of the DVD/CD
receiver's progressive scan output for the highest
video resolution possible.
If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the DVD/CD receiver.
on
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
pro)
on
ote
--
Set the
Progressive to "On" on the Setup
progressive signal, see page 16.
menu
protection system.
Rear of TV
Video connection
Connect the MONITOR OUT
receiver to the video in
cable
jack
jack
on
VIDEO
INPUT
S-VIDEO
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
INPUT
from the DVD/CD
the TV
using
the video
Y
Pb
Pr
L
supplied (V).
S-Video connection
V
Connect the S-VIDEO OUT
er
to the S-Video in
cable
jack
on
jack
on
the TV
the DVD/CD receiv-
using
S
the S-Video
C
(S).
ip
If you want to connect the DVD/CD receiver to a TV
with SCART socket, use the SCART-RCA adapter (T).
Component
Video
(Color Stream )
connection
COMPONENT
VIDEO OUT
Connect the COMPONENT VIDEO OUT/PROGRESSIVE
S/V
UT
MO
ROUT
SCAN
jacks from the DVD/CD receiver to the corresponding in jacks on the TV using an Y Pb Pr cable (C).
PROGRESSIVE
SCAN
Rear of DVD/CD
player
VIDEO Cable
T
Back of the DVD/CD receiver
SCART-RCA
Adaptor
TV/MONITOR
10
(SCART type)
for
Connections
External
(Continued)
Equipment Connections
Rear of VCR
(or
LD
player, etc)
L
PREATION
VIDEO
OUTPUT
AUDIO OUTPUT
R
COMPONENT
VIDEO OUT
S/VIDEO OUT
MONITOR OUT
PROGRESSIVE
SCAN
Connection
Connect the AUX IN
(L/R) jacks on the DVD/CD
receiver to the AUDIO OUT (L/R) jacks on the VCR,
LD player, etc using the audio cables.
ip
Press AUX
on
the remote control to select
input
to these
jacks.
AUX appears
on
the
Display
Window.
11
Connections
(Continued)
Speaker System
Connections
Connect the
the
speakers using
To obtain the best
possible
Front
surround sound,
Center
speaker
(Right)
supplied speaker
cords.
adjust
the
speaker parameters (volume, distance, etc.).
Front
speaker
(Left)
speaker
COMPONENT
VIDEO OUT
S/VIDEO OUT
MONITOR OUT
PROGRESSIVE
SCAN
Rear
speaker
(Right surround)
Rear
speaker
(Left surround)
Subwoofer
otes
Be
sure
to match the
speaker
cable to the
appropriate
terminal
on
the components:
+
to
+
and
--
to
--.
If the cables
are
reversed, the sound will be distorted and will lack base.
If you
use
Do not
12
front
remove
speakers
the front
with low maximum
cover
input rating, adjust the volume carefully
of supplied speaker.
to avoid excessive
output
on
the
speakers.
Connections
Speaker
In the
case
(Continued)
Placement
of normal
position
the 6
use
speakers (2
front
centre
speakers,
speaker,
2 rear
speakers
and sub-
woofer).
If you want to
subwoofer.
?
?
?
play
the excellent bass sound, DTS
digital
surround
or
Dolby Digital surround,
you should connect
a
Front
speakers
According to your listening position
speakers to 45 degree.
set up the
speakers for equal distance. And by hearing position
set up the interval between
Centre
speaker
The centre speakers and front speakers
are
ideally the
same
height.
But
normally place
it above
or
below the television.
Rear
speakers
Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround
sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or
above the level of the listener's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse
the sound.
In the
rear
?
case
of
speakers
a
smaller
above 60
room
size, if the audience is
90
than the listener 's
-
cm
near
to the rear wall set the rear
speakers opposite each other, and
set the
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Speaker
(Left)
Speaker
Front
Speaker
(Right)
Rear
Rear
Speaker
(Left)
Speaker
(Right)
Speaker Positioning Example
13
PREATION
Before
Mini
Operation
Glossary
for Audio Stream &
Allows you to enjoy 5.1(or 6) discrete channels of high quality
digital audio from DTS program sources such as discs, DVD
and compact discs, etc.bearing the trademark. DTS Digital
Surround delivers up to 6 channels of transparent audio(which
original masters) and results in exceptional clarity throughout a true 360 degree sound field. The
term DTS is a trademark of DTS Technology, LLC.
Manufactured under license from DTS Technology, LLC.
identical to the
The
Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital pro"
gram source. If you play DVDs with
enjoy even better sound quality, greater
which carries the
playing movie
"
"
the sound from the front left and
"
mark, you
can
Sound Mode
You can enjoy surround sound simply by selecting one
of the pre-programmed sound fields according to the
program you want to listen to.
A) By pressing SOUND
or
PRO LOGIC
NO
→
mark. This mode
→
PLII MOVIE
ROCK
CLASSIC
SOFT
PLII MATRIX
spatial accuracy, and
Dolby Digital
button
Each time you press SOUND button, the sound mode is
changed in the following order;
→
→
→
PLII MUSIC →
POP → LIVE → DANCE
→
→
3D SURROUND
→
TECHBYPASS
→
...
ips
improved dynamic range.
Use this mode when
(2CH STEREO)
right speakers and subwoofer. Standard two channel (stereo) sources completely bypass
the sound field processing. This allows you to play any source
using only the front left and right speakers and subwoofer.
Outputs
Surround mode
means
BYPASS
ROCK: Reproduces the acoustics of rock music.
POP: Reproduces the acoustics of pop music.
LIVE: Reproduces the acoustics of a 300-seat live.
DANCE: Reproduces the acoustics of dance music.
TECHNO: Reproduces the acoustics of techno
music.
CLASSIC: Reproduces the acoustics of orchestral
music.
SOFT: Ideal for soft acoustic sounds.
2 channel
provides the effect
being in a movie theatre or live concert house-an effect with
an intensity which can only be obtained through DOLBY PRO
LOGIC SURROUND. The effect of the front/back/left/right
movement of the sound image, as well as the sense of fixed
position in the sound image, is much clearer and more dynamof
ic than before.
B) By pressing
(II)
Dolby Pro Logic
II creates five full-bandwidth
from two-channel
sources.
output channels
This is done using an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds
or
tonal colorations.
use
with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
MUSIC mode:
The Music mode is for
and
provides
Each time you press
PL II button, the sound mode
is changed in the following order;
PRO LOGIC
PLII MATRIX
→
→
PLII MOVIE
BYPASS
→
PLII MUSIC
→
...
(This function available 2-channel mode only)
When DVD is inserted.
MOVIE mode:
The Movie mode is for
PL II button
with any stereo music recordings,
a wide and deep sound space. The Music mode
use
change the sound mode of DVD (Dolby Digital, DTS,
PRO LOGIC, etc) by pressing the AUDIO button on the remote
during playback.
Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used.
Yo u
can
Each time you press AUDIO button, the sound mode of DVD is
changed as the following order;
includes controls that allow the sound to be tailored to individual
listening
→→→
tastes.
MATRIX mode:
The Matrix mode is the
same as
the Music mode
except that the
logic is turned off. It may be used to
enhance mono signals by making them seem "larger." The
Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate
"cure" for poor FM stereo reception may be simply to force the
directional enhancement
audio to
mono.
3D SURROUND
produce a 3D Surround effect, using 3D Surround
Sound technology, which simulates multi-channel audio playback from two conventional stereo speakers instead of the five
or more speakers normally required to listen to multi-channel
This unit
?
?
The DVD/CD Receiver memorizes the last mode
settings for each source individually.
You can identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled with
the
logo.
DTS Digital Surround discs are marked with DTS.
-
-
-
can
audio from
a
encoded with
14
For your reference
home theatre. This feature works with DVD discs
Dolby Pro Logic and Dolby Digital audio tracks.
otes
When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling
frequency).
Sound Mode is not applicable when headphone is used.
Before
General
This manual
Operation (Continued)
Explanation
3
operating the
DVD/CD receiver. Some DVDs require specific operation or allow only limited operation during playback.
When this occurs, the symbol
appears on the TV
screen, indicating that the operation is not permitted by
gives
basic instructions for
the DVD/CD receiver
On-Screen
General
screen.
playback
1
2
is not available
on
status can be
can
displayed
changed on the
be
on
display operation
Press DISPLAY
numbers
the TV
menu.
an
The selected item will be
(e.g.,
title
can
setting
of
an
item.
be also be used for
number).
press ENTER to execute the
For
some
setting
functions,
setting.
Playback Status Displays
Repeat
TITLE
Title
CHAPT
Repeat Chapter
TRACK
Repeat
Track
ALL
Repeat
All Tracks
Repeat
A-B
AB
(non-PBC
Video CDs
(non-PBC
only)
Video CDs
only)
Repeat Off
OFF
Resume
during playback.
Press 3/4 to select
the
change
The number buttons
the disc.
Display
Some items
On-screen
or
Press 1/2 to
Action
play
from this
prohibited
or
point
not available
item.
highlighted.
otes
Some discs may not
provide all of the features on the
on-screen display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
DVD
Items
Function (Press 3/4 to select desired item)
Title Number
Shows the current title number and total number of
titles, and skips to the desired title number.
1/3
Chapter
Number
1 /12
Time search
0:20:09
Audio language
and Digital Audio
Output
D
mode
Subtitle language
Angle
Sound
VCD2.0
1 ENG
5.1 CH
ABC
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
Shows the elapsed playing time, and
searches the point directly from the elapsed time.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
1/2,or
Numbers, ENTER
1/2,or
Numbers, ENTER, SKIP
Numbers, ENTER
1/2,or
AUDIO
OFF
Shows the current subtitles language, and
changes the setting.
1/1
Shows the current angle number and total number of
angles, and changes the angle number.
1/2,or
Shows the current sound mode, and
changes the setting.
1/2,or
BYPASS
1/2,or
SUBTILE
ANGLE
SOUND
VCD1.1
Items
Function (Press 3/4 to select desired item)
Track Number
Shows the current track number, total number of tracks
and PBC On mode, and skips to the desired track number.
1/4
Time
0:20:09
Shows the elapsed playing time (Display only)
STER.
Shows the audio channel, and
changes the audio channel.
Audio Channel
Sound
Selection Method
BYPASS
Shows the current sound mode, and
changes the setting.
Selection Method
1
/2,or
Numbers, ENTER
--
1
/2,or
AUDIO
1
/2,or
SOUND
15
PREATION
Before
Initial
You
can
DVD/CD
Operation (Continued)
Picture
Setup
set your own Personal Preferences on the
TV
player.
4:3 Letterbox: Select when
Aspect
nected.
Initial
and
Setup
Operation Overview
DVD
Displays
a
standard 4:3 TV is
theatrical
images
picture.
above and below the
with
masking
con-
bars
The
connected. The video material formatted in the Pan &
1
Press SETUP.
4:3 Panscan: Select when
Setup
menu
appears.
Scan
style
picture are
is
played
cut off).
English
Disc Menu
French
Rating
German
Disc Audio
4:3
Letterbox
Spanish
Disc Subtitle
4:3
Panscan
Italian
Disc Menu
16:9 Wide
Chinese
Rating
Polish
Country
Hungarian
TV
Other--------
Menu
Code
Aspect
Language
Progressive
5.1
Scan
Speaker Setup
Use 3/4 to select the
will show the
screen
option,
menu
option.
current setting
menu
as
well
as
5.1
menu
Press ENTER to confirm
selection.
additional steps.
menu
Press
PLAY to move the
or
menu.
Language
Language
language
DVD
for the disc's Menu, Audio, and
The
Rating
German
Country
Code
Language
Progressive
TV
Select
Scan
Speaker Setup
you
see
language
Polish
Caution
Once the
Other--------
Setup
menu.
English
Disc Subtitle
Spanish
Disc Menu
French
Rating
German
Code
Aspect
Menu
16
for the
Disc Audio
TV
Speaker Setup
Chinese
when you press SETUP.
Country
Scan
Spanish
Language
a
Language
Others
Others
Menu
Code
Aspect
Menu
5.1
Hungarian
5.1
On
Italian
Aspect
Menu
Disc Subtitle
Country
English
French
TV
Off
Rating
Original
Disc Menu
DVD
Disc Audio
Progressive
Disc Subtitle
16:9 wide TV is connected.
Disc Menu
code, press CLEAR.
Disc Audio
a
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks, but are connecting the
DVD/CD player to a standard (analog) television, set
Progressive Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
original language set for the disc is selected.
Other : To select another language, use the number buttons to
enter the corresponding 4-digit number according to the language code list on page 29. If you enter the wrong language
:
Speaker Setup
Progressive Scan
Subtitle.
Original
Scan
16:9 Wide: Select when
3
your
4 Some
option require
SETUP, RETURN,
5 Setup
a
Language
alternate
option is selected, press 2, then
3/4 to select the desired setting.
Select
Aspect
Others
for the
setting(s).
While the
sides of the
Code
Progressive
Others
Disc
style (Both
Disc Subtitle
Menu
selected
back in that
Original
TV
The
conventional TV set is
Disc Audio
Country
2
a
Language
Italian
Dutch
This is the
menu
setting for progressive scan output is entered, an
image will only be visible on a progressive scan compatible
TV or monitor. If you set Progressive Scan to On in error, you
must reset the unit. Press STOP to stop any disc that is playing. Next, press STOP again and hold it for five seconds
before releasing it. The video output will be restored to the
standard setting, and a picture will once again be visible on a
conventional analog TV or monitor.
Before
Operation (Continued)
Speaker setup
5.1
Auto
Speaker settings
Play
DVD
set up the DVD/CD receiver so a DVD disc
automatically starts playing whenever the DVD is insert-
You
DVD
Select
speaker settings, including volume balance and
delay time, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 26.)
can
ed.
mode is set to On, this DVD/CD receiver
will search a title that playback time is longest and then
If Auto
Play
back the title
play
automatically.
On: Auto Play function is activated.
Off: Auto Play function is not activated.
Disc Audio
Disc Subtitle
R
Disc Menu
ote
Front L
Rating
Country
TV
Code
Volume
Size
Aspect
Menu
R
Scan
Progressive
Play
function may not work for
some
DVDs.
Small
Distance
Language
The Auto
0dB
0.3m
Test
Return
5.1
Speaker Setup
Others
Others
The DRC, Vocal, PBC and Auto
Play settings
can
be
changed.
Press 3/4 to select the desired item and press
ENTER. The setting of the selected item is changed
between On and Off.
Disc Audio
DRC
On
Disc Subtitle
Vocal
On
Disc Menu
PBC
On
Rating
Auto
Country
TV
Off
Code
Aspect
Menu
Language
Progressive
5.1
Play
Scan
Speaker Setup
Others
Dynamic Range Control (DRC)
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
possible,
thanks to
audio
digital
technology. However,
dynamic range of the
you may wish to compress the
audio output (the difference between the loudest sounds
and the
listen to
at a
of sound. Set
quietest ones). Then, you may
lower volume without losing clarity
a
movie
DRC to On for this effect.
Vocal
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
a
multi-channel karaoke
on
the disc will
mix into normal stereo sound.
PBC
Set
Playback Control (PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On or Off.
played according to the PBC.
played the same way as Audio
CDs.
17
PREATION
Before
Operation (Continued)
Parental Control
Country
Rating
Enter the code of
Movies
DVD
DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
on
information that
certain
to the
applies
the disc. These
scenes on
disc
complete
or
scenes are
Code
rated
are
Rating
Country
TV
Disc Menu
6
Progressive
Select
5
Rating
Scan
Speaker Setup
2
Language
1
Scan
Unlock
Speaker Setup
Follow step 3 of
Change
Others
3
Select
4
Shift
5
6 selection,
"Rating"
the first character
1
Select
2
While
3
When you have not entered a password.
Enter a 4-digit password using the number buttons
"Rating"
on
the
Setup
menu
using
the
3/4 buttons.
"Rating"
is selected, press 2.
second
personal 4-digit security password. then
press ENTER. Enter the 4-digit password again and
press ENTER to verify.
When you have already registered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER.
cursor
on
left.
using
the 3/4 buttons.
button and select the
3/4 buttons.
Press ENTER to confirm your country code
then press SETUP to exit the menu.
ote
Confirmation of the
the code is
4-digit password
changed (see "Changing
is necessary when
the 4-digit code"
below.).
Changing
the
4-digit
code
If you make a mistake before pressing ENTER, press
CLEAR and enter 4-digit security password again.
Follow
2
3
rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
Enter the old code, then press ENTER.
Select Change using 3/4 buttons then press
ENTER.
4
Enter the
5
Enter
exactly the same
fy by pressing ENTER.
6
Press SETUP to exit the
Select
a
Ratings
1 to 8: Some discs contain
scenes
played. Higher rated scenes
unless
an
alternative
scene
is available
The alternative must have the
lower
If
will not be
same
on
rating
18
some
DVDs.
then press ENTER.
code a second time and veri-
4-digit code,
menu.
If you
If you
forget your 4-digit
code
or a
1
Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
This function may not work for
new
(Rating).
the disc.
played
no
ote
1-2 as shown above to the left
your password, to clear the current password, follow the procedure below.
suitable alternative is found, playback will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
one.
Steps
not
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
be
on
2.
1
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
5
using 2
character using
the
to create a
4
the 3/4 buttons
menu.
3
Aspect
Country Code using
1 the setup
While Country Code is selected, press
2
4
Code
Progressive
5.1
Language
Others
7
Menu
Code
Aspect
Menu
8
Disc Subtitle
TV
LK
Disc Menu
5.1
Country
were
Code Set
Disc Subtitle
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
whose standards
country/area
Disc Audio
The Parental Control feature allows
country-dependent.
a
used to rate the DVD video disc, referring to the list
(See "Country Code List", page 30).
to
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
DVD
2
forget
Press SETUP to
the setup menu.
Use the Number buttons to enter the 6-digit number
display
"210499".
The
3
4-digit password is cleared.
Enter
a new
(Rating).
code
as
shown above to the left
DVD and Video CD
DVD and Video CD
Playback Setup
Turn
on
DVD
Operation
General Features
Playback
VCD2.0
the TV and select the video
VCD1.1
input
ote
source con-
nected to the DVD/CD receiver.
available
Audio system: Turn on the audio system and select
the input source connected to the DVD/CD receiver.
1
2
3
Unless stated otherwise, all operations described
the remote control. Some features may also be
menu.
TITLE Selection
DVD
Press OPEN/CLOSE to open the disc tray.
1/3
When
Load your chosen disc in the tray, with the
playback side facing down.
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and
starts
automatically.
If
playback
press PLAY.
In some cases, the disc
menu
playback
The
is
appear
may be displayed first after
Video CD which offers a menu.
DVD
or
than
title, you
one
to
can move
follows:
as
Press 1 2 to select
When
displayed
menu screen
more
Press DISPLAY, then press the appropriate number
button (0-9) to select a title number.
DVD
a menu screen
disc has
a
title, then press ENTER.
CHAPTER/TRACK Selection
instead.
If
a
another title
does not start,
might
the
Setup
on
use
loading
a
VCD1.1
a
disc has
title
on a
more
chapter/track
1/3
1 /12
disc has
than
one
than
more
track, you
one
chapter
can move
or a
to another
follows:
as
Press SKIP/SCAN .or >
DVD
Use the 1 234 buttons to select the title/chapter you
want to view, then press ENTER to start playback.
Press TITLE
or
MENU to return to the
menu screen.
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
Menu
setting
operating procedures
depending on the disc.
menu
menu screen.
otes
If Parental Control is set and the disc is not within the
the
4-digit
code must
be entered and/or the disc must be authorized
--
to select the
(see
page 18).
region code.
play
(0-9)
or
two-digit numbers, press
(0-9)in rapid succession.
DVD
VCD2.0
the numbered buttons
VCD1.1
1 Press and hold SKIP/SCAN .
two seconds
or
> for about
during playback.
The receiver will
now
go into SEARCH mode.
or
>
repeatedly
to select the
discs that have
code different from your receiver. The
this receiver is 5 (five).
press 1
then press ENTER.
2 Press and hold SKIP/SCAN .
on
Your receiver will not
chapter/track,
For
Search
Rating settings (not authorized),
the numbered buttons
using
ote
17.
"Parental Control",
DVDs may have a
number
for
You also may set PBC to Off under setup. See page
--
press DISPLAY. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
2
and the exact
may differ
Follow the instructions on the each
using
the
menu screen.
briefly during playback
to return to the beginning of the current chapter/track
or to select the next chapter/track.
Press SKIP/SCAN . twice briefly to step back to
the previous chapter/track.
To go directly to any chapter during DVD playback,
region
region code
a
for
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
3 To return to normal
play,
press PLAY.
19
OPERATION
DVD and Video CD
General Features
Still Picture and
VCD2.0
DVD
Repeat
(continued)
VCD1.1
during playback.
now
go into PAUSE mode.
advance the
Slow Motion
play,
VCD2.0
is not
appears
briefly
1 Press DISPLAY
display
on
CHAPT
at your chosen end point.
the TV screen, and the repeat
on
"
appears the
display window).
applicable
0:20:09
DVD
-:--:--
appears
during playback.
the
on
The
at
playing
on-screen
screen.
elapsed playing time of the
2 Within 10 seconds, press 3/4 to select the Time
Search icon in the on-screen display.
The "-:--:--" appears in the Time Search box.
for
3 Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and
in the box.
If you enter the wrong numbers, press CLEAR to
VCD1.1
right
remove
the
numbers you entered. Then enter the correct numbers.
TITLE
DVD Video Discs
1 To
VCD2.0
screen.
again
seconds from left to
DVD
starting point.
current disc.
Video CD.
Repeat
the TV
The Time Search box shows the
ote
reverse
title:
The Time Search function allows you to start
any chosen time on the disc.
playback.
required speed: t 1/16, t 1/8, t 1/4 or t 1/2
(backward), or T 1/16, T 1/8, T 1/4 or T 1/2
(forward).
To return to normal play, press PLAY.
in
"
Time Search
2UsetheSLOWSCAN-morM+toselectthe
playback
A
*
briefly
sequence begins ("
VCD1.1
-
Slow motion
a
3 To cancel the sequence, press REPEAT A-B.
1 Press SLOW SCAN m or M + during
The DVD/CD receiver will enter SLOW mode.
3
"
"A B" appears
press PLAY.
DVD
sequence in
a
VCD1.1
OFF
2 Press REPEAT A-B
control.
3 To return to normal
VCD2.0
1 Press REPEAT A-B at your chosen
picture frame-by-frame by
pressing PAUSE/STEP repeatedly on the remote
can
DVD
AB
To repeat
The DVD/CD receiver will
A-B
A*
Frame-by-frame playback
1 Press PAUSE/STEP
2 You
Operation
TRACK
-
ALL
OFF
4 Within 10
seconds, press ENTER
or
press PLAY to
confirm the start time.
Repeat Chapter/Title/Off
starts from the selected time on the disc. If you enter
an invalid time, playback will continue from the current point.
Playback
repeat the currently playing chapter, press
REPEAT.
The
2 To
Repeat Chapter icon appears
on
the TV
3D Surround
screen.
repeat the title currently playing, press REPEAT
VCD2.0
DVD
VCD1.1
a
BYPASS
3D SUR
second time.
The
Repeat Title icon appears
3 To exit
The
Repeat mode,
on
the TV
screen.
press REPEAT
Repeat Off icon appears
on
the TV
a
3D Surround effect, which
simulates multi-channel audio playback from two
This unit
third time.
1 To
Repeat
repeat the track
The
2 To
-
currently playing,
on
press REPEAT.
the TV
screen.
repeat the disc currently playing, press REPEAT
a
second time.
The
Repeat
3 To exit
The
All icon appears
Repeat mode,
on
the TV
screen.
press REPEAT
Repeat Off icon appears
on
the TV
a
third time.
screen.
ote
On
Video CD with PBC, you must set PBC to Off on the
setup menu to use the Repeat function. See page 17.
a
20
a
speakers, instead of the
speakers normally required to listen to
multi-channel audio from
Track/All/Off
Repeat Track icon appears
produce
conventional stereo
screen.
more
Video CDs
can
a
five
or
home theater system.
1 Press SOUND to select "3D SUR"
during playback.
2 To turn off the 3D Surround effect, press SOUND
again to select "BYPASS".
DVD and Video CD
General Features
Zoom
VCD2.0
DVD
Operation
(continued)
during playback
or
still
playback
discs: Menus
to
repeatedly, the magnification level
steps.
2 Use the 1 234 buttons to
move
the zoomed
through
picture.
3 Press CLEAR to
the
resume
normal
playback
or
the contents of DVD Video
Checking
activate the Zoom function.
If you press ZOOM
increases up to six
return to
paused image.
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
press the appropriate number button to select an option.
Or, use the 1 234 buttons to highlight your selection,
then press ENTER.
Title Menu
DVD
1 Press TITLE.
If the current title has
screen.
ote
The Zoom function may not work for
some
2 The
DVDs.
VCD2.0
DVD
menu, the menu will appear on the
menu can
list
menu
may appear.
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
remove
again.
VCD1.1
Disc Menu
MARKER SEARCH
1/9
a
Otherwise, the disc
and subtitle
3 To
Marker Search
DVD
VCD1.1
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
DVD
1 Press MENU.
You can start playback from a memorized
nine points can be memorized.
To enter a mark, follow these steps.
1
2
point. Up
The disc
to
2 To
menu
is
displayed.
the disc menu, press MENU
remove
again.
During disc playback, press MARKER when
playback reaches the spot that you want to
memorize.
Camera
The Marker icon will appear
angles, you can change
during playback.
Press ANGLE repeatedly during playback
desired angle.
on
the TV
1 to enter up to nine Marker
Repeat step
If the disc contains
briefly.
screen
points
on a
disc.
To Recall
a
Angle
DVD
recorded at different camera
to a different camera angle
scenes
The number of the current
Marked Scene
1/1
angle appears
on
to select a
the TV
screen.
1 ENG
1
disc
During
playback,
The MARKER SEARCH
press SEARCH.
menu
will appear
on
the
Audio
screen.
2 Within 10 seconds, press 1/2 or use the number
buttons to select a Marker number that you want to
recall.
will start from the Marked
scene.
ferent audio
SEARCH.
1
a
During
playback,
The MARKER SEARCH
2
Subtitles
Marked Scene
disc
press SEARCH.
menu
will appear
on
the
screen.
ABC
dif-
a
dif-
1 ENG
during playback
to see the
Press 1/2 to select the Marker number that you want
ote
Press CLEAR.
The Marker number will be erased from the list.
4
DVD
a
VCD1.1
repeatedly during playback to hear
channel (STER., LEFT or RIGHT).
Press SUBTITLE repeatedly
different subtitle languages.
to erase.
3
VCD2.0
Press AUDIO
4 To remove the MARKER SEARCH menu, press
To clear
5.1 CH
Press AUDIO repeatedly during playback to hear
ferent audio language or audio track.
Audio Channel Selection
3 Press ENTER.
Playback
Language
Selection
D
DVD
Repeat steps
If
appears, the feature is not available
on
the disc.
2 and 3 to erase additional Marker
numbers.
5
To remove the MARKER SEARCH menu, press
SEARCH.
21
OPERATION
Audio and MP3/WMA Disc
Operation
Notes
Playing Audio CD and MP3/WMA Disc
CD
MP3
MP3/WMA formatted
recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes
MP3/WMA Recordings on right.
Insert
Audio
1
MP3/WMA
An MP3 file is audio data
play
can
disc and close the tray.
CD; Audio CD menu appears
MPEG1 audio
files that have
on
The
player
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
can
not read an MP3 file that has a file
extension other than
on
About
the TV
go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
WMA(Window Media Audio)
An WMA file is
a
technology.
WMA(Windows
compression of
MP3 WMA
JPEG
MP3/WMA Disc
Microsoft audio
Media
Press 3/4 to select the MP3/WMA then press
ENTER.
The MP3/WMA menu appears on the TV screen.
Press RETURN to
choice menu.
1.
2.
compatibility
4.
Program
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Clear All
Folder8
5.
OFF
00:00
as
-
CD Creator", which creates an ISO9660 file system.
A single session disc requires MP3/WMA files in the
the disc
4
track then press PLAY
or
move
to the
previous page.
Program
MP3 WMA
TRACK 1
TRACK 3
TRACK04
TRACK05
TRACK 5
TRACK06
TRACK 6
TRACK07
TRACK 7
Clear All
STER.
0: 56: 18
Audio CD
BYPASS
menu
Clear All
TRACK 8
00:00
1
list,
are
use
in
MP3/WMA
menu
22
file list and want to return to the Folder
the 3/4 to
return to the
5
a
To stop
and
highlight
previous menu screen.
playback
or
or
8 letters
or
less
".wma" extension
"********.WMA".
7.
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
650.
at any other
requires discs/recordings to meet
certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically
types
(including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
OFF
ip
If you
incorporate ".mp3"
using
of recordable disc formats
TRACK 4
TRACK08
should be named
set to these standards. There are many different
TRACK 2
TRACK03
names
This DVD/CD receiver
TRACK01
TRACK02
File
to the next page.
move
Program
CD
6.
e.g. "********.MP3"
the current track's elapsed playing
time will appear on the display window and menu.
Playback will stop at the end of the disc.
Press MENU to
MP3/WMA file in the 1st
or use a new one.
and must
Playback starts.
During playback,
Press TITLE to
no
track, it cannot playback MP3/WMA files. If you wish
to playback MP3/WMA files, format all the data in
Press 3/4 to select a folder, and ENTER.
A list of files in the folder appears.
a
follows:
Sampling Frequency / only at 44.1kHz (MP3),
32 44.1kHz (WMA)
Bit rate / within 32 320kbps (MP3),
32
128kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "Easy-
first track. If there is
Press 3/4 to select
ENTER.
with this DVD/CD
-
3.
MP3 WMA
offers double the audio
-
to the MP3/WMA-JPEG
move
Audio)
compression
the MP3 format.
receiver is limited
3
".mp3".
a
screen
2
Recordings
About MP3
WMA
The DVD/CD receiver
on
press ENTER to
time, press STOP.
Customers should also note that
required
permission
is
in order to download MP3/WMA files and
music from the Internet. Our company has no
to grant such permission. Permission should
always
be
sought
from the
copyright
owner.
right
Audio and MP3/WMA Disc
Pause
CD
MP3
1 Press PAUSE/STEP
Operation (Continued)
WMA
Repeat
during playback.
2 To return to
playback,
PAUSE/STEP again.
press PLAY
or
press
sen
Selecting
CD
MP3
Press SKIP/SCAN . or >
playback to go to the next track
beginning of the current track.
Press SKIP/SCAN . twice
the previous track.
In
step back
to
to
of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
case
during playback.
Repeat
1 To
Track/All/Off
CD
MP3
WMA
repeat the track currently playing, press REPEAT.
The
Repeat icon and "TRACK" appears
the
on
Repeat icon and "A
*
"
appears
on
repeat all tracks
ond time.
The
Repeat icon and
on a
menu
disc, press REPEAT
"ALL" appears
on
the
3 To exit the sequence and return to normal
REPEAT A-B again.
The
Repeat
icon and "OFF" appears
3D Surround
a sec-
The
Repeat mode,
Search
CD
MP3
menu screen.
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multichannel audio from a home theater system.
1 Press SOUND to select "3D SUR"
during playback.
2 To turn off the 3D Surround effect, press SOUND
again to select "BYPASS.".
the
third time.
a
menu screen.
CD
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT, or RIGHT).
WMA
1 Press and hold SKIP/SCAN .
two seconds
The player will
on
the
press
menu screen.
press REPEAT
Repeat icon and "OFF" appears
on
play,
CD
Audio Channel Selection
3 To cancel
menu screen.
again
screen.
2 To
the
at your chosen end point.
The Repeat icon and "A B" appears on the menu screen,
and the sequence begins to play repeatedly.
to return to the
briefly
starting point.
2 Press REPEAT A-B
WMA
briefly during
or
CD
To repeat a sequence.
1 During disc playback, press REPEAT A-B at your choThe
Tracks
A-B
or
> for about
during playback.
now
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
or
>
repeatedly
to select the
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
Search speed and direction
are
indicated
on
the
menu
screen.
3 To exit SEARCH mode, press PLAY.
23
OPERATION
JPEG File
Viewing
Operation
JPEG Files
Press SKIP/SCAN .
This DVD/CD receiver
play discs with JPEG files
and Kodak picture CD. Before playing JPEG recordings,
read the notes on JPEG Recordings on right.
Insert
another File
Selecting
JPEG
can
disc and close the tray.
The MP3/WMA-JPEG choice menu appears
TV screen.
on
the
during viewing a
to the previous file.
once
to advance to the next file or
picture
Still Picture
1 Press PAUSE/STEP
a
>
or
during
The DVD/CD receiver will
slide show.
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
now
MP3 WMA
Flipping
JPEG
2
Press 3/4 to select the JPEG then press
ENTER.
The JPEG
menu
appears
on
the TV
the
picture
Press 3/4
during showing a picture
picture horizontally or a vertically.
to
flip
the
screen.
Rotating picture
JPEG
Press 1/2
Folder1
Folder2
clockwise
picture
Folder3
during showing
or
a
picture
to rotate the
counter clockwise.
Folder4
Folder5
Folder6
Folder7
Notes
Folder8
Slide
Speed
JPEG Files
on
Off
upon the size and number of the JPEG
files, it could take a long time for the DVD/CD
receiver to read the disc's contents. If you don't see
Depending
3
Press 3/4 to select a folder, and ENTER.
A list of files in the folder appears.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
the files
ip
JPEG files to less than 2 mega
er disc.
If you
list,
are
"
file list and want to return to the Folder
on
the remote to
highlight
and press ENTER to return to the
previous
4
a
the 34 buttons
use
"
in
If you want to view a particular file, press 3/4 to
highlight a file and press ENTER or PLAY.
Viewing the file proceeding starts.
During viewing a file, press RETURN
the previous menu (JPEG menu).
to move to
to the next page.
Press MENU to move to the previous page.
JPEG
move
Folder1
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
1024X768
Slide
Speed
Off
5/32
1024X768
Picture5.jpg
ip
viewing Slide Speed options: Fast,
Normal, Slow, and Off. Press 1/2 to highlight the Slide
Speed then press 3/4 to select the option you want to
There
are
three
use, and press ENTER.
5
To stop viewing at any other time, press STOP.
The JPEG menu appears.
24
---
pixels
Total number of files and folders
on
and burn anoth-
the disc should
be less than 650.
When you are using software such as "Easy CD
Creator" to burn the jpeg files into the CD-R, ensure
that all the selected files have the
when
copying
into the CD
".jpg"
extensions
layout.
If the files have
rename
File
them
names
".jpe" or ".jpeg" extensions, please
as ".jpg" files.
without
by
files
shown
are
".jpg"
extension will not be able to
this DVD/CD receiver. Even
be read
explorer.
Picture1.jpg
5/32
are
after several minutes, some of
reduce the resolution of the
Some disc may be incompatible due to different
recording format or condition of disc.
menu screen.
Press TITLE to
display
too big
an on-screen
as
JPEG
image
though
the
files in windows
Programmed Playback
CD
VCD2.0
Audio CD and MP3/WMA Disc
VCD1.1
function enables you to store your favorite
tracks from any disc in the player memory.
Press PROGRAM
1
mode to enter
during playback or in
the Program Edit mode.
the stop
E
mark will appear to the right of the word
the right side of the menu screen.
The
on
On
Video CD with PBC, you must set PBC to Off on the
setup menu to use the Program function. See page 17.
a
Program
contain 30 tracks.
can
Programmed Playback
ote
Program
Program
WMA
Video CD
Programmed Playback
The
MP3
Program
Insert Video CD and close the tray.
1
2
Press PROGRAM while
The VCD
Program
playback
is
stopped.
will appear.
Program
E
TRACK 1
Press PROGRAM to exit the
the
menu
VCD
ote
E
OPERATION
contain 30 tracks.
can
mark will
Program
TRACK 2
Edit mode;
TRACK 3
TRACK 4
disappear.
TRACK 5
TRACK 6
TRACK 7
Select
track, then press ENTER
a
2 selected track
Repeat step 2
Program list.
3
the
on
to
place
place
the
list.
additional tracks
on
the
ote
Press RETURN
Program
CD
Program
to
E
Program
MP3 WMA
TRACK 12
TRACK 2
TRACK 8
TRACK 1
TRACK 2
TRACK 3
TRACK 10
TRACK 2
TRACK 4
TRACK 4
TRACK 3
TRACK 3
PROGRAM to exit the
or
Program
menu.
E
TRACK 8
TRACK 1
TRACK 5
Clear All
TRACK 8
3
Follow steps 2-6 of "Programmed Playback with
Audio CD and MP3/WMA disc" on left.
4
To
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 6
TRACK 7
TRACK 7
Clear All
TRACK 8
0: 56: 18
STER.
Clear All
TRACK 8
BYPASS
00:00
3
OFF
playback from
programmed playback, press PROGRAM.
resume
normal
"PROG." indicator disappears in the display window.
Audio CD
menu
MP3/WMA
menu
Repeat Programmed
4
Press 2.
The
programmed track you selected last is highlighted
on
the program list.
currently playing,
Repeat icon and "TRACK" appears
The
press REPEAT.
on
the
menu
screen.
Press 3/4 to select the track you want to start
To repeat all tracks on the program list, press
REPEAT a second time.
Press TITLE to
The
5 playing.
Repeat icon and "ALL" appears on the menu screen.
To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and "OFF" appears on the menu screen.
to the next page.
Press MENU to move to the previous page.
move
Press PLAY to start.
6 Playback begins
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback stops after all of the tracks
have played once.
7
To repeat the track
Tracks
To
on
the
Program list
normal
"PROG." indicator disappears
on
the
a
Track from
menu screen.
Program
List
1 Press PROGRAM
MP3/WMA disc
playback from programmed playback, select a track of CD (or
MP3/WMA) list and then press ENTER.
resume
Erasing
Program
E
The
during playback (Audio CD and
only) or in the stop mode to enter the
Edit mode.
mark will appear.
2 Press 2 to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
erase
4 Press CLEAR.
The track will be erased from the
Erasing
the
1 Follow
steps
List"
as
Program list.
Complete Program
1-2 of
"Erasing
a
List
Track from
Program
above.
2 Use 3/4 to select "Clear All", then press ENTER.
The
complete Program for the disc
The programs
are
will be erased.
also cleared when the disc is removed.
25
Additional Information
Speaker Setup
Adjust
the
following settings
for the built-in 5.1 channel
Last Condition
surround decoder.
DVD
CD
Memory
VCD1.1
Disc Audio
This DVD/CD receiver memorizes the
Disc Subtitle
R
Disc Menu
Country
Code
Volume
Aspect
Menu
0dB
Size
Progressive
Scan
If you load
memorized, the latest stop
switch off the
Small
Distance
Language
settings
for
the last disc that you have viewed. Settings remain in
memory even if you remove the disc from the player or
Front L
Rating
TV
R
user
player.
tings
ly recalled.
0.3m
Test
a
disc that has its set-
position
is automatical-
Return
5.1
Speaker Setup
otes
Others
--
--
1
Select "5.1
Speaker Setup" using
buttons
the setup
2
While "5.1
on
the 3/4
menu.
Press 2 buttons to select the desired
Select
speaker.
341 2 buttons.
selection
speaker that you want to adjust. ((Front speakers (Left), Front speakers (Right), Centre Speaker, Rear
speakers (Left), Rear speakers (Right), Subwoofer))
a
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
appropriate system mode for your
TV system. If NO DISC appears in the display window,
press and hold P/STEP on the front panel for more than
5 seconds to be able to select a system (PAL, NTSC, or
AUTO).
When the selected system does not coincide with the
system of your TV, normal colour picture may not be
displayed.
AUTO:
Select when DVD/CD receiver is connected
PAL:
level of the selected
Size
speaker settings
settings.
are
fixed, you cannot change
Distance
If you connected speakers to your DVD/CD receiver,
setting the Distance lets the speakers know how far the
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
listener at the
same
time.
ote
You
can
not set the distance of subwoofer
speaker.
Test
Press ENTER to test the
Adjust
signals
of each
the volume to match the volume
memorized in the system.
Front Left (L)
Centre
→
Rear
Right (R)
→
→
Front
Rear Left
(L)
speaker.
of test signals
Right (R)
→
→
Subwoofer
Return
Press ENTER to return to the
26
Select when DVD/CD receiver is connected
Select when DVD/CD receiver is connected
with PAL-TV.
~
the
system TV.
with NTSC-TV.
Dolby
Volume
Since the
com-
You must select the
NTSC:
ote
adjust the output
speaker. (-6dB +6dB)
disc if
Select
with Multi
Press 1 / 2 to
a
you switch off the DVD/CD receiver before
mencing to play it.
System
3
Adjust options by using
4
time.
is selected, press 2
Speaker Setup"
button.
Speaker
Settings are stored in memory for use any
This player does not memorize settings of
previous
menu.
Radio
Operation
Radio stations
Presetting
preset 50 stations for FM and AM. Before
You
can
ing,
make
sure
1
on
the remote control until FM
AM appears in the
2
3
tun-
that you have turned down the volume.
Press BAND
display
or
window.
And then every time you press BAND, FM and
AM changes alternately.
Press and hold TUNING
or
on
the front
panel for about two seconds
frequency indication starts to change,
appear in the
(for
stereo
1
Press BAND until AM
play
a
2
FM appears in the dis-
window.
Press PRESET +/-
3
to select the pre-
repeatedly
set station you want.
Each time you press the button, the DVD receiver tunes in
one
program)
display window.
or
The last received station is tuned in.
then
when the DVD/CD Receiver tunes in
station. "TUNED" and "STEREO"
Preset radio stations in the DVD/CD receiver's memory
first (see "Presetting radio stations" on the left).
until the
release.
Scanning stops
to the Radio
Listening
preset station
at a time.
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or on the
remote control repeatedly.
-
To turn off the radio
Press POWER to turn the DVD/CD receiver off
another function mode
ote
"TUNED"
only
appears when the
signal
on
the front
Use manual
panel.
For manual
preset number will flash in the display window.
the front
on
Press TUNING
5 panel
or
to select the
on
the front
preset number you
want.
or
automatic
7
Press MEMORY
on
the front
panel again.
in
step
2.
For automatic
tuning,
or
press and hold TUNING
for about two seconds
on
the front
panel.
The station is stored.
Repeat steps
tuning
tuning, press TUNING
panel repeatedly.
or
6
AUX).
To listen to non-preset radio stations
Press MEMORY
A
or
select
is FM and
STEREO.
4
(CD/DVD
or
3 to 6 to store other stations.
To select
You
preset radio station directly
a
can use
the number buttons
on
the remote control
to select a
To tune in
a
station with
Press TUNING
a
weak
or
to tune in the station
signal
repeatedly
in
step 3
manually.
To clear all the stored stations
Press and hold MEMORY for about two seconds and
"CLEAR ALL" is
then press
appeared in the display window and
MEMORY again, the stations are cleared.
If you have accidentally entered into the "CLEAR
ALL" mode and you do not wish to clear the memory,
do not press any key. After a few seconds, the
"CLEAR ALL"
display
will go off
by
itself and
change
preset radio station directly.
For example, to listen to preset station 4, press 4 on the
remote control. To listen to preset station 19, press 1
then 9
(within
3
seconds).
For your reference
If an FM program is
Press MONO/ST.
noisy
panel so that
"STEREO" disappears in the display window. There
will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
on
the front
effect.
To
improve reception
Reorient the supplied antennas.
to normal mode.
ote
If all stations have
been entered, the FULL
message will appear in the display window for a
moment and then a preset number will flash.
To
change
already
the preset number, follow the steps 5-6
as
above.
27
OPERATION
Radio
Operation (Continued)
Sleep
Timer
You
set the DVD/CD receiver to turn off automati-
can
cally
1
at a
specified
time.
Press SLEEP to set the desired
The SLEEP indicator and
play
2
Dimmer
Setting
sleep
sleep time appears
time.
in the dis-
window.
Each time you press SLEEP the
in the following order.
setting changes
SLEEP 90→80→70→60→50→40→30→20→10→
OFF
can
check the time
remaining
before the
DVD/CD receiver turns off.
Press SLEEP. The
display
28
change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMER repeatedly.
Mute
Press MUTE to mute your unit.
You can mute your unit in order, for
the
telephone,
window.
remaining
time appears in the
to answer
example,
"MUTE" indicator flashes in the
display
window.
Using Headphone
ote
You
This function will
Connect
a
stereo
Jack
headphone plug ( 3.5mm)
into the
PHONES connector.
The
speakers are automatically disconnected
plug in a headphone (not supplied).
when you
Language
Code List
Enter the
appropriate
(See page 16).
code number for the initial
settings
"Disc Audio", "Disc Subtitle" and/or "Disc Menu"
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
REF NC
29
Country
Enter the
Code List
appropriate
code number for the initial
setting "Country Code" (See
page
18).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and Barbuda
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
SV
El Salvador
BB
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
French Southern
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
CI
Ivory Coast
IN
India
NU
Niue
CK
Cook Islands
IO
British Indian Ocean
NZ
New Zealand
US
United States
CL
Chile
Territory
OM
Oman
UY
Uruguay
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape Verde
JP
Japan
PL
Poland
VI
Virgin Islands (British)
Virgin Islands (USA)
CX
Christmas Island
KE
PM
Saint Pierre and
VN
Vietnam
CY
Cyprus
KG
Kenya
Kyrgyzstan
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman Islands
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
DE
30
Republic
Georgia
& S. Sandwich
(USA)
Anguilla
Mayen
Islands
Republic
Principe
Territories
(French)
Tobago
Kingdom
USA Minor Outlying
Islands
Miquelon
(French)
City State
Grenadines
Troubleshooting
Check the
following guide
for the
possible
cause
a
before
problem
contacting
No power.
?
The power is on, but
the DVD/CD receiver
does not work.
picture.
?
Correction
The power cord is disconnected.
?
No disc is inserted.
?
?
?
The TV is not set to receive DVD
signal
?
The video cable is not connected
?
securely.
sound or
only a very low-level
sound is heard.
?
The equipment connected with the
audio cable is not set to receive DVD
?
The audio cables
not connected
are
?
?
playback picture
The DVD/CD receiver
does not start playback.
?
?
Connect the video cable into the
jacks
urn on
the TV.
Select the correct input mode of the
audio receiver so you can hear the
sound from the DVD/CD receiver.
the audio cable into the
jacks
securely.
The power of the equipment connected
with the audio cable is turned off.
The audio
Select the appropriate video input mode
on the TV so the picture from the DVD/
CD receiver appears on the TV screen.
?Connect
securely.
is poor.
into the
Insert a disc. (Check that the DVD or,
audio CD indicator in the DVD display is
?T
signal output.
?
The
securely
securely.
?T he connected TV power is turned off.
no
the power cord
wall outlet.
Plug
lit.)
output.
There is
service.
Cause
Symptom
No
of
connecting
The disc is
cable is
damaged.
dirty.
?T
the equipment connected with
the audio cable.
?
?
No disc is inserted.
?
urn on
it with
Replace
new one.
Clean the disc.
Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display is
lit.)
?
?
?
?
An
unplayable
The disc is
placed upside
The disc is not
The disc is
?Amenu
is
disc is inserted.
placed
?
down.
within the
?
guide.
dirty.
on
the TV
?
?
?
screen.
Insert
disc. (Check the disc
type, colour system and Regional code.)
a
playable
Place the disc with the
down.
playback
Place the disc on the disc tray
inside the guide.
side
correctly
Clean the disc.
Press the SETUP button to turn off the
menu screen.
?
Loud hum
heard.
or
noise is
?
?
?
?
The
Rating
The
plugs
level is set.
and
The disc is
jacks
are
?
?W
them with a cloth
tened with alcohol.
dirty.
dirty.
The speakers and components
connected poorly.
Cancel the Rating function
the rating level.
?
are
The DVD/CD receiver is located too
close to the TV.
?
ipe
or
change
slightly
mois-
Clean the disc.
Connect the
speakers
and components
securely.
?
Move your TV away from the audio
components.
31
REF NC
Troubleshooting (Cont'd)
Cause
Symptom
Radio stations cannot
be tuned in.
?
The antenna is
positioned
Correction
or
connected
poorly.
?
?
?
The signal strength of the stations is too
weak (when tuning in with automatic
Connect the antenna
securely.
the antennas and connect
external antenna if necessary.
Adjust
?T
une
in the station
an
manually.
tuning).
?N
stations have been preset or preset
stations have been cleared (when
o
?
Preset the stations
(page 27).
tuning by scanning preset stations).
The remote control
does not work properly.
?T he remote control is not
?
remote sensor of the DVD/CD receiver.
?
?
?
32
pointed
at the
The remote control is too far from the
DVD/CD receiver.
There is an obstacle in the path of the
remote control and the DVD/CD
receiver.
The batteries in the remote control
flat.
are
?
?
?
Point the remote control at the remote
sensor of the DVD/CD receiver.
Use the remote control within about 23
ft (7 m).
Remove the obstacle.
Replace
the batteries with
new ones.
Specification
Power
Power
[Genral]
Refer to main label
Mass
External dimensions
[CD/VD]
(W
x
H
x
D)
AM
[MW]
360
x
75
x
Semiconductor laser,
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
PAL 625/50, NTSC 525/60
Designs
to
35°C, Operation
status: Horizontal
wavelength
650
REF NC
nm
200 Hz to 18 kHz
More than 70 dB
(1 kHz, NOP,
20 kHz
LPF/A-Filter)
More than 65 dB
(1 kHz, at 12W position) (20 kHz LPF/A-Filter)
1.0 V (p-p), 75 Ω, negative sync., RCA jack
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x
(C) 0.3 V (p-p), 75 Ω
1.0 %
108.0 MHz
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
87.5
Stereo mode
25W+25W(6Ωat1kHz,THD10%)
Front: 25W + 25W (THD 10 %)
-
or
65.0
-
74.0 MHz, 87.5
1
108.0 MHz
-
10.7 MHz
55 dB
180
522
-
-
(Mono)
10,000 Hz
1,611 kHz
or
530
-
1,610 kHz
450 kHz
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Centre*: 25W
Outputs
S-VIDEO
Surround*: 25W
+
Subwoofer*: 60W
25W
(8Ω
(6Ω
at 30
at 1
kHz, THD 10 %)
Hz, THD 10 %)
MONITOR
Satellite
[Suplied Acesori ]
mm
Laser
PHONES:
[Speakrs]
314
5% to 85%
Surround mode
[Amplifer]
kg
Temperature: 5°C
S-video output
[FM]
3.8
Operating conditions
Operating humidity
Video output
[Video]
[Tuer]
Refer to main label
supply
consumption
1
Type
Impedance
Frequency Response
Way
140
1
Speaker
Passive Subwoofer
1
Way
H
x
D)
1
(LHS-D6245W)
Speaker
8Ω
20,000 Hz
-
81 dB/W
Rated
x
Speaker (LHS-D6245T)
6Ω
Sound Pressure Level
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
(32 Ω, 20mW)
(1m)
60
-
1,500 Hz
80 dB/W
(1m)
25W
60W
50W
120W
89x130x114mm
160x350x333mm
0.5
kg
4.5
kg
?Speakers...........................6?Speakercables......................5
?Remotecontrol......................1?Batteries(AAA).......................2
?AMloopantenna.....................1?FMantenna.........................1
and
specifications
are
subject
to
change
without notice.
33
P/N: 3834RH0025E
Download PDF