LG | LH-R7500TA | LG LH-R7500TA Owner’s Manual

LH-R7500TA NA5HLLD_ENG
DVD
Recorder Receiver
System
OWNER'S MANUAL
MODEL:LH-R7500TA
(Main Unit: LH-R7500Y
Speakers: LHS-75TAS, LHS-75TAC,
LHS-75TAW)
R
CD-R/RW
Before
connecting, operating
adjusting this product,
booklet carefully and completely.
please
read this instruction
or
P/N: 3834RH0075T
Safety
Precautions
CAUTION
CAUTION
appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance
and has
CAUTION: TO REDUCE THE RISK
(OR BACK)
damaged
PERSONNEL.
within
symbol
is intended to alert the
user
an
to
the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient
magnitude
risk of electric shock to
persons.
The exclamation
point
within
is intended to alert the
important operating
page of this owner's manual to be certain.
cracked wire insulation
or
are
dangerous. Any
these conditions could result in electric shock
with arrowhead
a
branch circuits. Check the
outlets, loose
damaged wall outlets, extension cords, frayed power cords,
REFER SERVICING TO QUALIFIED SERVICE
to constitute
or
Do not overload wall outlets. Overloaded wall
NO USER-SERVICEABLE PARTS INSIDE
lightning flash
equilateral triangle
additional outlets
no
specification
OF ELECTRIC SHOCK
This
Power Cord
Most
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT REMOVE COVER
concerning the
user
an
equilateral triangle
to the presence of
or
or
of
fire.
or
Pe riodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue
an
exact
appliance, and have the
replacement part by an authorized
use
of the
cord
replaced
with
servicer.
Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall
the point where the cord exits the appliance.
outlets, and
and maintenance
instructions in the literature
(servicing)
accompanying the
product.
SERIAL NUMBER:
You
can
find the serial number
the back of the unit. This
number is
unit and not available to others. You
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
should
information here and retain this
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
as a
OR MOISTURE.
as a
bookcase
or
equipment
in
confined space
a
guide
permanent record of your purchase.
Model No.
WARNING: Do not install this
such
unique to this
record requested
on
Serial No.
______________________________
______________________________
similar unit.
Disposal
of your old
appliance
1. When this crossed-out wheeled bin
attached to
covered
product it means the
by the European Directive
a
symbol is
product is
2002/96/EC.
2. All electrical and electronic
products should be
disposed of separately from the municipal
waste stream via designated collection facilities appointed by the government or the local
CAUTION:
This
To
product employs
ensure
proper
use
a
Laser
of this
System.
product, please
read this owner's
manual
carefully and retain it for future reference. Should the
unit require maintenance, contact an authorized service center.
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous radi-
authorities.
3. The correct
disposal of your old appliance will
help prevent potential negative consequences
ation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
for the environment and human health.
4. For
detailed information about
disposal
of your old appliance, please contact your city
office, waste disposal service or the shop
where you purchased the product.
STARE INTO BEAM.
CAUTION:
CLASS 2M VISIBLE AND INVISIBLE LASER RADIATION
more
WHEN OPEN AND INTERLOCKS DEFEATED DO NOT
STARE INTO THE
BEAM OR VIEW DIRECTLY WITH OPTI-
"Pro
CAL INSTRUMENTS.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
vases, should be
This
placed
product
on
the
apparatus.
73/23/EEC.
2
Logic"
and the double-D
Dolby Laboratories. "Dolby",
symbol are trademarks of Dolby
Laboratories.
DTS and DTS
Digital Out are registered
Digital Theater Systems, Inc.
trademarks of
SHOWVIEW is
Gemstar
is manufactured to
the radio interference
DIRECTIVE
Manufactured under license from
comply with
requirements of EEC
89/336/EEC, 93/68/EEC and
registered trademarks of
Development Corporation.
The SHOWVIEW System is manufactured
Gemstar Development Corporation.
a
under license from
Ta ble of Contents
INTRODUCTION
Recording............................31
SafetyPrecautions.......................2
TableofContents........................3
DVD Recorder Receiver Overview
.
.
.
.
.
.
.
4-10
.
.4
RecordableandPlayableDiscs.
PlayableDiscs.........................5
RemoteControlOperation................5
.
.
.
.
.
.
.
.
.
.
.
Disc-relatedterms......................6
AboutSymbols.........................6
Aboutrecordablediscs...................7
AboutDVDrecording...................8-9
?RecordModeSet....................31
?RecordAspectRatio..................31
?DVRecordAudio.....................31
?A utoChapter........................31
Disc..............................32-33
?Initialize............................32
?DiscProtect.........................32
?Finalize............................33
?DiscLabel..........................33
Overview for the On-Screen
Display
.
.
.
.
.
.
.
.
34
Carduseableonthisunit.................9
UsingMemoryCard.....................9
Precautions..........................10
NotesonDiscs........................10
FrontPanel............................11
RemoteControlOverview................12
HOOKUP
Connections........................13-22
PLAYBACK
.35-38
DVDandVideoCDOperation.
PlayingaDivXMovieDisc................39
40-42
Audio CD and MP3/WMA Operation
40-41
Playing an Audio CD or MP3/WMA file
ProgrammedPlayback..................42
JPEGFileOperation..................43-44
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
RearPanelConnections.................13
ConnectingtotheAerial.................13
ConnectionstoYourTV..................14
Accessory Audio/Video (A/V) Connections 15-16
Assembling and Connecting to the Speakers
(FrontSpeaker)........................17
.18
SpeakerSystemConnections.
SpeakerPositioning....................19
.20
MiniGlossaryforSoundMode.
DelayTimeSetting.....................21
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
RECORDING
BasicRecording........................45
.45
BasicRecordingfromTVchannels.
InstantTimerRecording.................45
TimerRecording.....................46-47
Recording from an External Input Source 48-49
48
Recording from External Components
48
Recording from a Digital Camcorder
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
WhatisDV?..........................49
SoundLevel..........................22
TestTone............................22
XTS(ExcellentTrueSound)..............22
XTSpro.............................22
EDITING
?TVAspectRatio.....................27
?DisplayMode.......................27
?ProgressiveScan....................27
50
Chapter List Menu Overview
.51-56
TitleandChapterEditing.
Titles,Chapters,andParts...............51
AddingChapterMarkers.................51
ChangingTitleThumbnails...............51
MakingaNewPlaylist...................52
Adding Additional Title/Chapters to the Playlist 52
DeletingaTitle/Chapter.................53
DeletingaPart........................53
NamingaTitle........................54
.54
CombiningTwoChaptersIntoOne.
MovingaPlaylistChapter................55
?PBC..............................28
ProtectaTitle.........................55
?F actorySet.........................28
HideaChapter........................56
DividingOneTitleIntoTwo...............56
SETUP
Pre-operationSetup..................23-34
InitialSettings.........................23
General...........................23-28
?A utoProgramming....................23
?ProgramEdit.....................24-25
?ManualClockSet....................26
Language............................28
?DisplayLanguage....................28
?DiscLanguage......................28
Audio...............................28
?DolbyDigital........................28
.28
DRC(DynamicRangeControl).
Lock(ParentalControl)...............29-30
?
.
.
.
.
.
.
.
.
?SetPassword.......................29
Title List and
.
.
.
.
.
.
?AreaCode..........................30
?DivX(R)VOD........................30
.
.
.
.
.
.
.
.
.
.
.
.
.
.
REFERENCE
AdditionalInformation...................57
OverwritingRecording...................57
Viewing Title List menu displayed on
.57
otherDVDRecordersorPlayers.
Playing Your Recordings on Other
.57
DVDPlayers(FinalizingaDisc).
RadioOperation.....................58-59
.60
LanguageCodeandAreaCodeList.
Troubleshooting.....................61-62
Specifications.......................63-64
.
?Rating.............................29
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3
INTRODUC
DVD Recorder Receiver Overview
Recordable and
DVD-RW
DVD-RW discs
the
Video Disc
(Digital
These Discs
Discs
Playable
can
can
ReWritable):
-
be formatted for VR mode
be recorded
on
recording or Video mode recording.
repeatedly. Recordings can be erased, then you can
record
again
on
Disc.
same
[VR mode]
Recordings can be extensively edited
Playable only on VR mode compatible players (after finalization)
[Video mode]
Playable on regular DVD players (after finalization)
Limited editing features
DVD-R
Video Disc
(Digital
Recordable)
These Discs can be recorded only once. After you finalize
DVD-R discs can be only formatted to Video mode.
Playable on regular DVD players (after finalization)
Limited editing features
DVD+RW
(Digital
These Discs
the
Video Disc
can
+
be recorded
ReWritable)
on repeatedly. Recordings
a
can
DVD-R, you
be
erased, then you
on
(Digital
These Discs
any
can
on
it
or
record
edit it.
again
on
DVD+RW
compatible players (automatically finalization)
The edited contents are playable on DVD+RW compatible players only
Recordings can be edited the title/chapter
DVD+R
cannot record
Disc.
same
Playable
-
Video Disc
can
be
Recordable)
recorded only once. After
after finalization
+
you finalize
a
DVD+R, you
cannot record
on
it
or
edit it
more.
Playable on DVD+R compatible players (after finalization)
Any edited contents are not be compatible on DVD+R compatible players. (Hide, chapter combine,
added chapter mark, etc.)
Limited title/chapter editing features.
The recommendable recordable DVD discs
DVD-R
SONY
(8x, 16x)
TDK (4x, 8x)
Verbatim (4x, 8x)
Panasonic (2x, 4x)
DVD+R
DVD-RW
SONY
Victor
(2.4x, 4x, 8x, 16x)
TDK (4x)
Mitsubishi (4x, 8x)
Ricoh (2x, 4x, 8x)
(1x, 4x)
Maxell (1x, 2x, 4x)
TDK (2x)
Mitsubishi (2x)
---
DVD+RW
SONY
(2.4x)
TDK (2.4x)
Philips (4x)
Ricoh (2.4x)
HP (2.4x, 4x)
Note:
If
a
DVD-RW/DVD+RW discs is recorded
using
4
this recorder. So if you want to
use
using
a
the disc
personal computer
on
this
or
recorder, you
other DVD Recorder
Receiver, you
must format the disc
using
the
cannot format the disc
original
recorder.
DVD Recorder Receiver Overview
Discs
Playable
DVD(8cm/12cmdisc)
Discs such
Video CD
movies that
as
(VCD) (8
VIDEO CDs
cm
be
can
/ 12 cm
purchased
rented
INTRODUC
disc)
CD-Rs/CD-RWs in VIDEO
or
or
CD/Super VIDEO
CD format
AudioCD(8cm/12cmdisc)
Music CDs
CD-Rs/CD-RWs in music CD format that
or
CD-R/CD-RW
(8
cm
/ 12 cm
be
can
purchased
disc)
CD-R/CD-RW discs that contain audio
titles, DivX, MP3, WMA,
or
JPEG files.
Notes:
Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CDR/RW (or DVD±R/RW) discs cannot be played on the unit.
Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.
Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW) may not
be playable.
--DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may
not play if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder's lens.
If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in
which it may not play because of the settings of the application software used to create the disc. (Check with the
software publisher for more detailed information.)
--
--
--
--
--
Regional
code of the recorder and DVDs
This recorder is
2
code
on
designed
the labels of
and manufactured for
some
playback
DVD discs indicates which
Region
2 encoded DVD software. The
region
type of the recorder can play those discs. This unit
play any other discs, the message "Incorrect region
play only DVD discs labeled 2 or ALL. If you try to
code. Can't play back" will appear on the TV screen. Some DVD
though their playback is prohibited by area limits.
can
of
discs may not have
a
region
code label
even
Notes on DVDs and Video CDs
Some
unit
playback operations
plays DVDs and Video
of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this
CDs according to disc content designed by the software manufacturer, some playback
features of the unit may not be available or other functions may be added.
Refer also to the instructions supplied with the DVDs and Video CDs. Some DVDs made for business purposes may
not be played on the unit.
Remote Control
Operation
Point the Remote Control at the remote
Remote Control
Battery
sensor
and press the buttons.
Installation
Remove the
battery
batteries with
cover on
and
the
matched
rear
of the Remote
Control, and insert
two R03
(size AAA)
correctly.
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
5
DVD Recorder Receiver Overview
Disc-related terms
There
two different standards for
are
of Video CDs
Types
DVD±R/DVD±RW
DVD -R and DVD +R
(Continued)
are
two
types of Video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
recordable DVD drives and discs. This format allows
PBC
information to be recorded onto the DVD disc
with the
system via
tion still
pictures
DVD +RW and DVD -RW
writable
two standards for
media, meaning the DVD
erased and re-recorded.
4.38
are
only
content
Single-sided
can
discs
re-
be
can
hold
and double-sided discs hold twice
Gigabytes
once.
(DVD only)
The main film content,
or music album.
Each title is
assigned
locate it easily.
you to
accompanying
a
feature content,
title reference number
enabling
(Video
CD and Audio CD
only)
Sections of a picture or a musical piece on a Video CD
or an Audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
Video CDs not
About
"
Video CD with PBC
and still
moving pictures
(Playback control) functions,
pictures
tions called "Scenes". Each
on
the Scene
enabling
A
scene
menu
and
are
scene
assigned
divided into
available is
a scene
sec-
displayed
number,
you to locate the scene you want.
may be composed of one or several tracks.
DivX
DivX is the
name
which is based
on
of
a
the
revolutionary
new
MPEG-4
dard for video.You will be able to
using
this DVD
player.
new
they
with PBC
included
are
on
(Version 1.1)
Symbols
symbol display
may appear on the TV
This icon means the function
manual is not available
on
during operation.
explained in this owner's
that specific disc, or at that
screen
time.
About the disc
symbols
A section whose title has
applicable only
symbol.
are
the
on
one
of the
to those discs
following symbols
represented by the
provided on this Recorder
recording mode. One or more
VR
bols(
,
Video
,
DVD+R
each function
see
for instructions
functions
at
a
,
DVD+RW
in this
(explained
glance whether
it's
are
depen-
of the sym-
appear by
so that you can
manual)
applicable to
)
the disc
loaded.
Video
DVD-R/RW with Video
VR
DVD-RW with VR
+R
DVD+R disc
video codec
compression stanplay DivX movies
equipped
+RW
DV D+RW disc
DVD
DVD-Video disc
VCD
Video CDs
CD
Audio CDs
DivX
DivX files
MP3
MP3 files
WMA
WMA files
JPEG
JPEG files
The finalized DVD disc is
6
if
played
"
dent
Scene
a
be
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Many
On
can
the disc.
About the
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number to
enable you to locate the chapter you want. Depending
on the disc, chapters may not be labeled.
Track
functions, or other
typical computer-like operations. Moreover, high resolu-
as
much.
Title
menus, search
a
recording
recording
mode
mode
DVD-Video disc.
DVD Recorder Receiver Overview
About recordable discs
How
are
DVD+RW mode
recordable discs different?
The essential difference among DVD-R, DVD-RW,
DVD+R and DVD+RW is that DVD-R and DVD+R are
record-once
medium, while DVD-RW and DVD+RW
re-recordable/erasable medium. You
can
DVD-RW and DVD+RW disc
erase a
are
re-record/
approximately
DVD+R mode
play my recordable discs in a regular DVD
player?
Generally, DVD-R, DVD+R and DVD-RW discs recorded
in Video mode are playable in a regular DVD player, but
they must be 'finalized' first. This process fixes the contents of the disc to make them readable to other DVD
DVD-Video discs.
DVD-RW discs recorded in VR
are
playable
in
some
player.This
indicates
capable
of
with Video
What
are
There
are
(Video Recording)
mode
players.
Unfinalized DVD+RW discs
DVD
?
?
Can I
as
recording +RW
?4different picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players
The edited contents is playable on regular DVD players only after finalizing
Recordings can be edited the title/chapter
?
1,000 times.
players
(Continued)
are
playable
in
a
regular
product feature that is
playing DVD-RW discs recorded
Recording format.
a
'recording modes'?
various
recording modes available using this
Recorder. When recording to a DVD-R, DVD+R or
DVD+RW disc, recordings are always in Video mode.
DVD-RW discs can be formatted for VR mode recording
or Video mode recording.
+R
recording
?4different picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players (after finalization)
?A ny edited contents are not be compatible on regular
DVD players. (Hide, chapter combine, added chapter
mark, etc.)
Limited title/chapter editing features.
?
?
Note :
DVD-Video Format
(Video mode)
VR
recording
?4different picture quality/recording time settings
able (HQ, SQ, LQ, EQ)
Not playable on regular DVD players
Recordings can be extensively edited
avail-
?
?
Video mode
recording Video
?4different picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players (after finalization)
Limited editing features
?
?
mode
a new
format for
recording on DVD-R/RW and DVD+R/RW discs that was
approved by the DVD Forum in 2000. You may therefore
experience problems playing recordable DVD discs in
some players. Symptoms include video artifacts, audio
and/or video dropouts and playback suddenly stopping.
Our company cannot take responsibility for problems
playing discs recorded on this Recorder in other players.
Is
editing
a
DVD like
editing
a
video
tape?
No. When you edit a video tape you need one video
deck to play the original tape and another to record the
edits. With
DVD, you edit by making
play and when to play it.
plays the disc according to
to
VR mode
is
About word
'Original'
On
the
and
'Playlist' of what
playback, the Recorder
Playlist.
a
'Playlist'
Throughout this manual, you will often see the words
Original and Playlist to refer to the actual content and
the edited version.
?
Original:
content refers to what's
actually
recorded
on
the disc.
?
content refers to the edited version of the
Playlist:
disc
---
how the
Original
content is to be
played.
Disc type
Disc format
Recording
Functions
DVD-Video
Video format
n/a
Playback only
DVD-RW
Video
Recording
format (default)
VR mode
Playback, Recording, Original/Playlist Editing
Video format
Video mode
Playback,
limited
Recording,
limited
Editing
DVD-R
Video format
Video mode
Playback,
limited
Recording,
limited
Editing
DV D+RW
+RW Video format
DVD+RW
Playback,
limited
Recording, Title/Chapter Editing
DVD+R
+R Video format
DVD+R
Playback,
limited
Recording,
limited
Title/Chapter Editing
7
INTRODUC
DVD Recorder Receiver Overview
About DVD
(Continued)
Notes for
recording
?
This recorder cannot make
recordings
CD-R
on
This
or
Our company takes no responsibility for recording failure due to power outages, defective discs, or damage
?
to the Recorder.
?
Fingerprints and small scratches on a disc can affect
playback and/or recording performance. Please take
proper
of your discs.
care
Disc types and
and settings
can
pre-recorded
DVD-Video
play
?
?
five different kinds of DVD discs:
?
discs, DVD-RW, DVD-R,
DVD+RW and DVD+R discs. The disc format for DVD-R
discs is
always
"Video format"---the
ed DVD-Video discs. This
can
you
play
a
DVD-R in
means
a
same as
that
regular
once
pre-record-
finalized,
DVD-Video, which is
have
not
recordable, and
so
does not
recording mode).
Within the recording modes (which are fixed for them
whole disc) are the record settings. These can be
changed as required for each recording and determine
the picture quality and how much space the recording
on
Recording
the disc.
TV audio channels
This recorder
can
If the NICAM
setting (page 25)
broadcast is
record either NICAM
is set to
or
regular
audio.
Auto, then if the
NICAM, you can record the NICAM audio.
If the broadcast is non-NICAM, the regular audio is
always
8
recorded.
not exact because the
variable bit-rate video
that the exact
compression.
recording time will depend
the material
The
recording time available may decrease if you
heavily edit a disc.
If using a DVD-RW disc, make sure you change the
recording format (Video mode or VR mode) before
you record anything on the disc. See page 32
(Initialize) for how to do this.
When using a DVD-R disc, you can keep recording
until the disc is
player.
Video Recording
a
will take up
?
DVD
By default, the DVD-RW disc format is
(VR) format, though you can change this to Video format, if required. (Reinitializing the disc will erase the
contents of the disc.)
The recording mode is closely related to the disc format.
If the disc format is Video Recording format, then the
recording mode is VR mode; if the disc format is Video
mode, then the recording mode is Video mode (except
for
means
are
disc.
recording formats, modes,
This recorder
?
uses
times shown
being recorded.
When recording a TV broadcast, if the reception is
poor or the picture contains interference, the recording times may be shorter.
If you record still pictures or audio only, the recording
time may be longer.
The displayed times for recording and time remaining
may not always add up to exactly the length of the
on
CD-RW discs.
?
recording
recorder
Notes :
?
The
recording
until you finalize the disc.
recording session, check the
full,
or
Before you start a
amount of recording time left
?
When
using
a
the disc.
DVD-RW disc in Video
time available will
title recorded
on
on
increase if you
the disc.
?T he Erase Title
only
option
in the Title
mode, recording
erase
the last
List-Original menu
only hides the title, it does not actually erase the title
from the disc and increase the recording time available (except for the last recorded title on a DVD-RW
disc in Video mode).
?O v erwrite recording is available using DVD+RW discs.
DVD Recorder Receiver Overview
Restrictions
video
on
(Continued)
Card useable
recording
?You cannot record
?
?
?
copy-protected video using this
recorder. Copy-protected video includes DVD-Video
discs and some satellite broadcasts. If copy-protected
material is encountered during a recording, recording
will pause or stop automatically and an error message
will be displayed on-screen.
Video that is 'copy-once only' can only be recorded
using a DVD-RW disc in VR mode with CPRM (see
below).
NTSC format signals from the analog or the DV inputs
is not recorded correctly with this recorder.
Video signals in SECAM format (from the built-in TV
tuner or from the analog inputs) are recorded in PAL
format.
Compact
(CF)
(MD)
Secure Digital Card (SD)
Multi Media Card (MMC)
SmartMedia Card (SMC)
xD-Picture Card (xD)
Memory Stick (MS)
Memory Stick Pro (MS-Pro)
Compatible with: FAT 12, FAT 16, or FAT 32
Only use the memory cards recommended above.
Regarding
Write Protect
For cards that have
on
protect switch, if the switch
be possible to write, erase or format the
it will not
a
write
card.
What is 'CPRM'?
protection system (with scramble system) only allowing the recording of 'copy once' broada
Flash Card
Micro Drive
is
CPRM is
this unit
on
copy
Inserting/Removing
the
Memory Card
cast programs. CPRM stands for Content Protection for
Recordable Media.
This Recorder is CPRM
compatible,
which
means
that
record copy-once broadcast programs, but you
cannot then make a copy of those recordings. CPRM
you
can
recordings
can
only
be made
on
mode, and CPRM recordings
played
players
that
are
only be
specifically compatible with
can
CPRM.
Copyright
?
?
SD, MMC, SMC,
xD, MS, or MS-Pro card
DVD-RW discs format-
ted in VR
on
Insert
Recording equipment should be used only for lawful
copying and you are advised to check carefully what
is lawful copying in the area in which you are making
a copy. Copying of copyright material such as films or
music is unlawful unless permitted by a legal exception or consented to by the rights owner.
product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses
only, unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is pro-
Insert CF
or
MD
Inserting the card: Insert straight-in until it fits into
place.
Removing the card: Withdraw the card carefully.
Notes:
the memory card out of reach of children. If
swallowed, seek medical advice immediately.
Keep
A memory card may not be used for this recorder
Do not extract the memory card in operating (play,
copy, move,
etc.).
This
Using Memory Card
1.
Insert
2.
Press CARD while TV
The
TV
a
memory card.
Memory
viewing.
Card slot choice
menu
appears
on
the
screen.
hibited.
?
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE.
IN CASE OF 625 PROGRESSIVE SCAN PICTURE
3.
Use b / B to select the desired
then press ENTER.
The menu appears
PROBLEMS, IT IS RECOMMENDED THAT THE
Note:
USER SWITCH THE CONNECTION TO THE 'STAN-
For details
DARD DEFINITION' OUTPUT. IF THERE ARE QUES-
pages.
on
each
on
the TV
Memory
Card slot
screen.
operation item,
refer to relevant
TIONS REGARDING OUR TV SET COMPATIBILITY
WITH THIS MODEL
625p
DVD Recorder
Receiver,
PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.
9
INTRODUC
DVD Recorder Receiver Overview
Precautions
Notes
on
Handling
the unit
Handling
(Continued)
When
shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packaged at the factory.
Discs
discs
Do not touch the
by
the
edges
so
playback side of the disc. Hold the disc
that fingerprints will not get on the sur-
face. Do not stick paper
or
tape
on
the disc.
When
setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
the unit away from the TV, VCR,
unit after removing the disc.
or
radio,
or
turn off the
Storing
After
To
keep
Do not
near
the surface clean
use
volatile
such
liquids,
as
the unit. Do not leave rubber
contact with the unit for
leave marks
on
a
insecticide spray,
plastic products in
long period of time. They will
or
discs
playing,
there may be a considerable
increase inside the car.
light,
as
a
use a
the unit
soft, dry cloth. If the surfaces
soft cloth
solution. Do not
benzine,
lightly
use
thinner,
or
temperature
the surface.
To clean the cabinet
Use
case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
Cleaning
Cleaning
store the disc in its
are
moistened with
a
extremely dirty,
mild detergent
strong solvents such
as
these
as
might damage
discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the center outward.
alcohol,
the surface
of the unit.
Yes
To obtain
a
clear
No
picture
The DVD Recorder Receiver is
a
high-tech, precision
device. If the
optical pick-up lens and disc drive parts
are dirty or worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
Do not
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for older
vinyl
records.
Moisture Condensation
Never
operate this product immediately after moving it
from
cold location to
two
a
or
a warm
three hours without
operating it. If you
situation, it may damage
product in such a
discs/tapes and internal parts.
10
location. Leave it for
use
this
Front Panel
a
b
c
d
eh
f
g
jk
a
h
POWER
Disc
or
OFF.
VOLUME CONTROL
Tu rn the knob clockwise to increase sound
disc here.
a
Remote Sensor
Point the recorder remote control here.
i
Tray
Insert
INTRODUC
lmn
Switches the DVD Recorder Receiver ON
b
i
level,
counterclockwise to decrease sound level.
c
OPEN/CLOSE
Opens
d
e
f
(Z)
closes the disc
or
j
tray.
Insert
B
(PLAY)
Starts playback.
MS
k
x
(STOP)
Stops playback
or
recording.
Press
repeatedly
to set the record-
RDS Data
MUTE: The
,
m
window
:
memory card
(CF/MD).
output of
a
digital
camcorder.
S-VIDEO IN
output of an external
(TV/ Monitor, VCR, Camcorder, etc.).
REC: The recorder is
D
a
Connect the S-Video
Shows the current status of the recorder.
RDS:
(SD/MMC/SMC/xD/MS/
MEMORY CARD Slot 2
Connect the DV
recording.
g Display
memory card
lDVIN
time.
ing
a
Pro).
Insert
z (REC)
Starts
MEMORY CARD Slot 1
n
Indicates
IN/AUDIO IN
(Left/Right))
output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
sound is muted.
encoding
(VIDEO
Connect the audio/video
recording.
type indicators
speaker
INPUT 4
source
format of the current
disc.
PLII :
or
Indicates sound mode is DOLBY PRO LOGIC
DOLBY PRO LOGIC II.
:
or a
Indicates when the recorder is in timer
timer
recording
is
recording
programmed.
clock, total playing
time, elapsed time, title number, radio frequency, volume, Surround, chapter/track number, channel, etc.
:
Indicates
11
Remote Control Overview
POWER
Tu r ns DVD Recorder Receiver ON and
OFF.
CD/DVD
Select the DVD Recorder Receiver's
function mode to DVD.
FM/AM Tuner select
Select FM
or
AM band
choice.
(FM
the
as
listening
AM bands).
and
0-9 numerical buttons
Selects numbered
in
options
a menu.
TITLE
the disc's Title menu, if
available.
Displays
OPEN/CLOSE
Opens
point during playback.
SEARCH
Marker Search
Displays
menu.
ZOOM
Enlarges
DVD video
image.
MENU/LIST
Accesses
DVD
menu on a
disc,
Switches between Title
Title
List-Original and
List-Playlist menu.
DISPLAY
Accesses On-Screen
Displays
Display.
viewing a TV
information while
program.
LEVEL
To set the sound level of desired channel.
/
SKIP(-/+) (.
Go to next
chapter
or
>)
track. Returns to
of current
beginning
go to
chapter or track or
previous chapter or track.
DELAY
To set the
delay time of each speaker in
Dolby Digital and Dolby Pro Logic II mode.
SCAN(-/+) (m/M)
Search backward
or
forward.
PAUSE/STEP
Pause
playback
(X)
recording
temporarily.
or
B
Starts
(PLAY)
playback.
STOP
Stops playback
or
(x)
recording.
z REC
Starts
recording.
Press
repeatedly to set
the recording time.
REC MODE
Selects the
recording
HQ, SQ, LQ
mode:
or
EQ.
TIMER REC
Displays
Timer Record
menu.
MUTE
Tu r ns the sound
on
and off
temporarily.
RDS
To view the various
displays
of the RDS
options.
PTY
To start
a
search for
a
specific
PTY
type.
SHOWVIEW
To
display
SHOWVIEW
12
the program
menu
for
System programming.
tray.
AV
Changes the input to use for recording.
(Tuner,AV1,AV2,AV3,AV3Opt,AV4orDV).
PIP
Selects PIP function
off.
on or
TEST TONE
To
adjust
speakers
the sound balance of the
from the listener's
position.
SUBTITLE
Selects
a
subtitle
language.
AUDIO/MO.ST.
-
Selects
-
Selects STEREO
MARKER
Marks any
and closes the disc
an
audio
language.
or
MONO.
SOUND MODE
Selects sound mode.
XTS
To
enjoy great
sound effect.
XTS pro
To
enjoy
more
natural and realistic
sound.
SETUP
Accesses
or removes
the
Setup
menu.
bBvV(left/right/up/down)
Selects
options.
menu
PR/PRESET(+/-)(v/V):
Select programme of TV
Radio.
or
MEMORY/ENTER
-
Confirms
-
Stores
selections.
menu
radio station's
a
frequency
in
the tuner's memory.
RETURN (O)
Removes the menu.
VOLUME
To
(+/-)
adjust speaker
volume and TV
volume.
INSTANT SKIP
Skips 15 seconds forward on the disc
(about the length of a typical TV: commercial).
CHP ADD
Inserts
chapter
recording.
a
marker when
playing/
THUMBNAIL
Selects
a
thumbnail
current title for
Chapter
List
use
picture
for the
in the Title List
or
menu.
CLEAR
Removes
a
mark
on
the Marker Search
menu.
REPEAT
Repeat chapter, track,
title
or
all.
REPEAT A-B
Repeats sequence
(A and B)
between two
points
CARD
Accesses the
menu
MP3/WMA, JPEG
or
for memory card.
TV/DVD
To view channels selected
recorder tuner
or
by
by
the
the TV tuner.
DivX
Connections
Rear Panel Connections
a
bc
d e f
g
hj
i
HOKUP
kl mn
a
Plug
b
i
AC Power Cord
into the power
j
supplied speakers
k
AUDIO IN 3
l
(Left/Right)
output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
f
AUDIO OUT
(Left/Right)
Connect to
TV with audio
a
Pb
g
inputs.
a
OPTICAL IN Connector
TV with Y Pb Pr
VIDEO OUTPUT Switch
Select either COMPONENT VIDEO OUT
or
signal of EURO AV1 AUDIO/VIDEO terminal
depending on how you connect the recorder
RGB
to the
of
Digital
Device.
output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
VIDEO OUT
Connect to
o
inputs.
optical output
an
Connect the video
n
Pr)
Connect to
AM ANTENNA CONNECTORS
mVIDEOIN3
COMPONENT VIDEO OUT/PROGRESSIVE SCAN
(Y
jack.
ANT.IN
Connect
Connect the audio
e
TV with SCART
Connect the AM antenna to this terminal.
FM ANTENNA CONNECTORS
Connect the FM antenna to this terminal.
d
a
Connect the aerial to this terminal.
to these
terminals.
c
EURO AV1 AUDIO/VIDEO
Connect to
source.
SPEAKER CONNECTORS
Connect the six
p
o
p
a
TV with video
inputs.
S-VIDEO OUT (DVD OUT)
Connect to an S-Video Input
on
TV.
RF. OUT
Passes the
signal
from the AERIAL to your TV/moni-
tor
TV.
h
EURO AV2 AUDIO/VIDEO
Connect the audio/video
source
output of
(Pay-TV decoder,
Connecting
Set
an
external
Top Box, VCR, etc.).
to the Aerial
Rear of TV
Aerial
SCART
Remove the aerial cable
ANTENNA
INPUT
from your TV set and
insert it into the aerial socket at the back of the
recorder.
socket
input
on
Plug
one
plug
end of the aerial cable into the TV
the recorder and the other end into the aerial
socket
on
R
your TV set.
RF coaxial connection
Connect the RF. OUT
jack on the DVD Receiver
Recorder to the aerial input jack on the TV using the
75-ohm Coaxial Cable supplied (R). The RF. OUT jack
passes the signal through from the AERIAL jack.
Rear of the DVD Recorder Receiver
13
Connections
(Continued)
Connections to Your TV
Tips
your TV and other equipment you wish
to connect, there are various ways you could connect
the recorder. Use only one of the connections
Depending
on
described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Make
sure
the DVD Recorder Receiver is connected
to the TV. Tune the TV to the correct video
directly
input channel.
--
jack
audio
--
the
When
the COMPONENT VIDEO OUT
using
on
jacks,
set the VIDEO OUTPUT switch to COMPONENT.
When
the SCART
using
jack,
set the VIDEO OUT-
PUT switch to RGB.
to the
Connect the EURO AV1 AUDIO/VIDEO scart
the DVD
jacks
Do not connect the DVD Recorder Receiver's AUDIO
OUT
of the
following connections, depending
capabilities of your existing equipment.
one
SCART connection
Caution
--
Make
phono
in
jack (record deck)
of your
system.
Do not connect your DVD Recorder Receiver via your
VCR. The DVD image could be distorted by the copy
protection system.
on
jack on
Recorder Receiver to the corresponding in
the TV using the scart cable (T).
Video connection
Connect the VIDEO OUT
Receiver to the video in
cable
jack on the DVD Recorder
jack on the TV using the video
(V).
Component Video
connection
Connect the COMPONENT VIDEO OUT
DVD Recorder Receiver to the
SCART INPUT
VIDEO
INPUT
AUDIO INPUT
L
R
COMPONENT VIDEO INPUT
Y
Pb
Pr
jacks
on
the TV
using
Progressive Scan
If your television is
T
V
A
C
an
Y Pb
jacks on the
corresponding input
Pr cable (C).
connection
high-definition or "digital ready"
television, you may take advantage of the recorder's
progressive scan output for the highest video resolution
possible. If your TV does not accept the Progressive
Scan format, the picture will appear scrambled if you try
Progressive Scan on the recorder.
a
Connect the COMPONENT VIDEO OUT/PROGRESSIVE
SCAN
jacks
jacks
on
the recorder to the
on
the TV
using
the Y Pb Pr
corresponding
cable (C).
in
Notes :
Set the
Progressive to "On" on the setup menu for
progressive signal, see page 27.
Set the progressive to "Off" by removing any disc
from the unit and close the disc
DISC" is
window. Then press
STOP and hold it for five seconds before releasing it.
displayed
Progressive
Rear of the DVD Recorder Receiver
scan
video connections
Audio
on
the
tray. See that "NO
display
does not work with the
(yellow VIDEO
(Left/Right) Connection
Connect the left and
right
AUDIO OUT
Recorder Receiver to the audio left
the TV
OUT
using
the audio cables
(A).
jacks of the DVD
and right IN jacks on
Do not connect the
DVD Recorder Receiver's AUDIO OUT
phono
14
analog
jack).
in
jack (record deck)
jack
of your audio
to the
system.
Connections
Accessory
(Continued)
Audio/Video
(A/V)
Pictures
containing copy protection signals
prohibit any copying cannot be recorded.
Connections
Connecting
to the EURO AV2
AUDIO/VIDEO
jack
Connect
similar
a
VCR
or
Notes:
AV2 AUDIO/VIDEO
jack
recording
If you pass the recorder signals via the VCR, you may
not receive a clear image on your TV screen.
device to the EURO
of this recorder.
Be
sure
to connect your VCR to the recorder and your
TV in the order shown below. To watch video
watch the
VCR, Cable Box, or
Satellite Tuner, etc.
that
TV
tapes through
a
second line
input
tapes,
on
your
TV.
Line
VCR
RECORDER
input
1
TV
Line
input
2
When you record to a VCR from this recorder, do not
switch the input source to TV by pressing the TV/DVD
button
on
the remote.
If you are using a B Sky B tuner, be sure to connect
the tuner's VCR SCART jack to the EURO AV2
AUDIO/VIDEO
jack.
If you disconnect the recorder's mains lead, you will
not be able to view the signals from the connected
VCR
or
tuner.
Rear of the Recorder Receiver
Tip:
You do not need to turn
signals
on
the recorder to view the
from the connected tuner
on
your TV.
15
HOKUP
Connections
Connecting
(Continued)
Radio Aerial Connections
to the INPUT 3 or INPUT 4
Jacks
Connect the
Connect the
input jacks (AV3, AV4) on the recorder to
the audio/video out jacks on your accessory component,
using audio/video cables.
supplied
FM/AM aerials for
listening
radio.
Connect the AM
loop
aerial to the AM aerial
connec-
tor.
Note:
Connect the FM wire aerial to the FM aerial
If you use the S-VIDEO IN jack on the front panel, the
VIDEO IN jack on the front panel is not available.
connector.
Jack
to the
panel of Accessory Component
(VCR, Camcorder, etc.)
AM
Loop
aerial
(supplied)
S-VIDEO
OUTPUT
FM Wire aerial
(supplied)
AUDIO
OUTPUT
OR
R
L
VIDEO
OUTPUT
6
6
6
6
6
Notes:
To
prevent noise pickup, keep the AM loop aerial away from
the DVD Recorder Receiver and other components.
OR
Be
Rear of the DVD Recorder
Front of the
Receiver
DVD Recorder
fully extend the FM wire aerial.
After connecting the FM wire aerial, keep it
zontal as possible.
Receiver
Connecting
connect
Use
Digital Camcorder
the front
Using
tapes
a
a
panel DV IN jack, it is possible to
digital camcorder and digitally transfer
DV
DV
to DVD.
a
DV cable
(not supplied)
to connect the DV in/out
of your DV camcorder to the front
of this recorder.
jack
panel
DV IN
jack
Note:
This
It is
jack is for connection to DV digital camcorder only.
not compatible with digital satellite tuner or D-VHS
video decks.
DV
Digital
Camcorder
DV
IN/OUT
Front of the DVD Recorder Receiver
16
sure
to
as
close to hori-
Connections
Assembling
(Continued)
and
The front
speakers are
speakers from speaker
Connecting
detached from the
stands
How to connect the
speaker
Speakers (Front Speaker)
stands. Connect the
speaker
cables and assemble the front
illustrated.
as
To attach the
Speakers
Connect the
speaker
terminals
the bottom of each
on
to the
speaker
to the stand
HOKUP
cables to the
appropriate
front speaker.
After
connecting the speaker cables to the
appropriate terminals on the bottom of each front
speaker and attach the front speakers to the
speaker stands.
Note:
You cannot detach the
bling
the front and
speaker from
rear speakers.
the stand after
assem-
About Ferrite Core
Be
sure
cables
to attach the ferrite
(for connecting
This ferrite
core
to this
reduce noises.
core can
Press the
speaker
unit).
How to attach the ferrite
1
to the
core
stopper [a] of the ferrite
core
to
open.
2
Wind the cable
once on
the ferrite
core.
The
3
Close the ferrite
core
length
short
unitl it clicks.
as
here is
much
as
possible.
Note:
Attach the ferrite
and
core near
the unit
(Refer
to the
fig.3
(Subewoofer)
comment.).
17
Connections
(Continued)
Speaker System
Connections
Connect the SYSTEM
Speaker, using
Connect the
the
on
the DVD Recorder Receiver to the SYSTEM SELECTOR
supplied System
speakers using
To obtain the best
possible
the
of the Active Subwoofer
cable.
supplied speaker
surround
rear
cables.
sound, adjust the speaker parameters (volume, distance, etc.).
Front
Front
speaker
(Right)
speaker
(Left)
Rear
speaker
(Left surround)
Rear
speaker
(Right surround)
Center
speaker
Subwoofer
Notes:
Be
sure
to match the
speaker
cable to the
appropriate
terminal
on
the
components:
+
to
+
and
--
to
--.
If the cables
are
reversed, the sound will be distorted and will lack base.
If you
18
use
front
speakers
with low maximum
input rating, adjust
the volume
carefully
to avoid excessive
output
on
the
speakers.
Before
Operation
Speaker Positioning
In the
of normal
case
position
use
the 6
speakers (2
front
1 center
speakers,
speaker,
2
rear
speakers
and sub-
woofer).
If you want to
a subwoofer.
play
the excellent bass
sound, DTS digital surround
or
Dolby Digital surround,
you should connect
HOKUP
?F r ont
speakers
According to your listening position set up
interval between speakers to 45 degree.
?
the
speakers
for
equal
distance. And
by hearing position
set up the
Center
The
speaker
center speaker
and front
speakers
ideally
are
the
same
height.
But
normally place
it above
or
below the
television.
?
Rear
speakers
Place left and right
behind the
listening
These
speakers
Center
Speaker
recreate sound motion and
atmosphere required
for surround sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or above the level of the listener's ears. It is also effective to direct the rear speakers
towards a wall or ceiling to further disperse the sound.
In the case of a smaller room size, if the audience is near to the rear wall set the rear speakers opposite each
other, and set the rear speakers above 60 90 cm than the listener's ears.
area.
-
?
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Front
Speaker
(Left)
Front
Speaker
(Right)
Rear
Speaker
(Left)
Rear
Speaker
(Right)
Speaker Positioning Example
19
Before
Mini
Operation (Continued)
Glossary
for Sound Mode
Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources bearing the trademark such
as discs, DVD and compact discs, etc. DTS Digital Surround delivup to 6 channels of transparent audio(which means identical to
the original masters) and results in exceptional clarity throughout a
When
vides
playing recordings of live music and classic, this mode proa feeling similar to actually being in a small concert hall.
ers
degree sound field. The term
Technology, LLC. Manufactured under
Technology, LLC.
true 360
DTS is
a
trademark of DTS
When
playing recordings of live music and classic, this mode provides
a feeling similar to actually being in a large concert hall.
license from DTS
This mode
provides
a
three dimensional effect similar to that of
movie theater.
The
Dolby Digital surround format lets you enjoy up to 5.1(or 6)
channels of digital surround sound from a Dolby Digital program
"
"
If you play DVDs with
mark, you can enjoy even better sound quality, greater spatial accuracy, and improved dynamic
source.
range.
Pro
Logic
II creates five full-bandwidth
from two-channel
sources.
output channels
This is done using an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds
or
tonal colorations.
MOVIE mode:
The Movie mode is for
use
with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
MUSIC mode:
The Music mode is for
and
provides
a
with any stereo music recordings,
wide and deep sound space. The Music mode
use
includes controls that allow the sound to be tailored to individual
listening
tastes.
MATRIX mode:
The Matrix mode is the
same as
directional enhancement
the Music mode
except that the
logic is turned off. It may be used to
enhance mono signals by making them seem "larger." The Matrix
mode may also find use in auto systems, where the fluctuations
from poor FM stereo reception can otherwise cause disturbing
surround signals from a logic decoder. The ultimate "cure" for
poor FM stereo reception may be simply to force the audio to
mono.
20
Outputs
the sound from the front left and
and
right speakers
subwoofer.
You
can
select BYPASS
remote control.
(II)
Dolby
BYPASS
by pressing
SOUND MODE
on
the
a
Before
Delay
In
Operation (Continued)
Time
Dolby Digital
Setting
or
Pro
Dolby
mode it is assumed
Logic
that the distance from the listener to each of the
ers
is
equal.
center
If not then
the
delay
times of the
the sound will be heard simulta-
speakers
or rear
neously by
setting
speak-
the listener.
The interval from the
to the listener. If the dis-
speakers
Setting the delay time in the
Dolby Digital and Dolby Pro
Logic (II) mode
Dolby Digital and
time of each speaker
is
follows
as
In
Dolby Digital mode
Center delay time : 0
5ms
Rear delay time: 0
15ms
In Dolby Pro Logic mode
Center delay time : cannot be set
If the rear delay time is set in Dolby Digital mode, in the
Dolby Pro Logic mode the delay time will be automatical~
~
ly
set.
The
time is 1
delay
If the Center and
front
msec
speakers
rear
from the
speakers
per 30
further than the
listener, the delay time will be
2
Press
3
If
at
delay
time
You
(A)
L
to
is
setting
change
the
Display
time.
delay
complete, press
DELAY.
adjust the center delay time only
and its delay time appears.
Setting
in the
Dolby Digital
the Sound Effects in the
Dolby
Pro
Logic (II)
Press SOUND MODE
repeatedly
to select the
Music mode.
Each time you press these buttons, the sound
mode is changed in the following order;
R
C
DC
time appears in the
can
mode
1
setting
delay
Note:
minimum.
Surround
/
Music mode of
cm.
are
The current surround
Window.
tance from the listener to each
the
speaker is the same, in
Dolby Pro Logic mode the delay
1
Press DELAY.
PRO LOGIC
DF
→
PLII MOVIE
→
PLII MUSIC
PLII MATRIX→ HALL 1→ HALL 2
SW
BYPASS
→
→
THEATER
→
...
DS
SL
SR
(B)
2
Press DELAY.
The current surround
delay
time appears in the
Display
Window.
If the distance of DS is
longer than the DF in
the left figure, set the Surround Delay Time as 0ms.
Otherwise, change the setting according to the below.
Ex) If the distance from front speakers to the listener is
3 m and from rear speakers from the listener is 1.5 m,
in the Dolby Digital mode the rear delay time is 5 msec.
3m (DF)
1.5m (DS)
1.5m (B)
1.5m (B)
150cm / 30cm
5msec
equal
or
=
-
=
In
to
3
4
Press
Center
desired Sound mode.
y
C WIDT
/
to
y
/
button, it is changed
DIMEN...
change
the steps.
PANO: ON/OFF
25msec
~
~
Matrix: 0
a
DIMEN:-3~+3
II
~
Music: 0
to select
CWIDT:0~+7
Dolby
Logic (Surround delay time):
Pro Logic: 15
30msec
Movie: 10
/
Each time you press the
in the following order;
PANO
=
Pro
Press
15msec
~
5
15msec
delay
time
setting
If the distance of DF is
equal
If
setting
is
complete, press
DELAY.
(Dolby Digital mode only)
to the distance of DC in
the left
figure, set the Center Delay Time as 0ms.
Otherwise, change the setting according to the table
below.
Ex)
er
If the distance from the front
is 3m and from the center
2.4m, the
center
3m
2.4m
(DF)
60cm (A)
-
delay
(DC)
/ 30cm
=
=
speakers to the listenspeaker to the listener is
time is 2msec.
60cm
(A)
2msec
21
HOKUP
Before
PANO
Operation (Continued)
Test Tone
(PANORAMA)
This control extends the front stereo
image to include
the surround speakers for an exciting "wraparound"
effect with side-wall imaging. It is particularly effective
for recordings which have strong left- or right-channel
elements in the
tuated
by
mix,
as
these
detected and
are
accen-
This function allows you to can easily adjust the sound
balance of the speakers from the listener's position.
Select the test tone mode
1
A hiss noise
speakers
(Center Width)
posileft/right
speaker and the
speakers over a range of eight steps. Step "3" uses a
combination of all three front speakers to give the best
vocal imaging and most seamless soundstage presentation, and is recommended for most recordings. Step
"0" places all center sound in the center speaker. Step
"7" places all center sound equally in the left/right
speakers, just as in conventional stereo.
(DIMENSION)
This control allows the
user
to
in the
the
gradually adjust
sound field either towards the front
or
the
rear.
This
can
help achieve the desired balance from all
the speakers with certain recordings that may contain
either too much or too little spatial effect. Step "0" is the
recommended setting, which has no effect on the
sound. Steps 1, 2, and 3 gradually move the sound for-
out for 2 seconds from each
following order;
C (Center)
FR (Front Right)
(Front Left)
SR (Surround Right)
SL (Surround Left)
SW (Subwoofer)
FL (Front Left)
This control allows center-channel sounds to be
DIMEN
comes
FL
tioned between the center
TEST
TONE.
the Panorama process.
C WIDT
by pressing
→
→
→
→
→
2
You
→
...
adjust the sound level while the test
operating. First press LEVEL then press
can
tone is
/
the
all the
buttons,
speakers
so
is
that the sound level from
same
from the listener's
posi-
tion.
?
3
If
During the
be paused
setting
tone, if you adjust the sound level, it will
test
in the current
speaker
channel.
complete, press TEST TONE.
is
be useful to
XTS
You
(Excellent True Sound)
enjoy
digital original
can
the vivid stereophonic sound of the
source without any signal distortion.
towards the surrounds.
Each time you press XTS during 2 channel mode,
the setting changes in the following order.
XTS-1→XTS-2→XTS-3→XTSOFF...
Sound Level
Tips:
ward, and steps --1, --2, and
You
1
2
can
--3
move
the sound
XTS- 1:
set the sound level of the desired channel.
Press LEVEL
on
the remote
Press
/
to select
a
desired
Each time you press the
in the following order;
FL
C
/
Display
Window.
XTS- 2:
speaker
to set.
button, it is changed
FR
→
3
/
selected
source
XTS- 3:
adjust the sound level
channel. (-6dB
+6dB)
effect
via the
by playing
rear speakers
the sound
same as
the
You
can
operate both XTS-
1 and XTS- 2
simultaneously and it can complement the
relative degrading of the sound pitch of the
...
to
of sound at woofer
speakers.
→
→
Press
→
sense
for you to satisfy with.
In the mode of 2 CH BYPASS, It creates the
high display
front
→
playing the movie with the weak bass
relatively to the general music, it
enforces the
(Front Left)
(Center)
(Front Right)
SR (Surround Right)
SL (Surround Left)
SW (Subwoofer)
FL (Front Left)
→
sound
control.
The level indicator will appear in the
When
woofer at the XTS- 2 mode.
of the
~
Repeat step
2-3 and
4 the other channels.
adjust
the sound level of
Note:
The XTS- 2 mode is
temporarily
disabled when
from 2.1 CH to 5.1 CH and it is enabled when
changing
changing it
to
2.1 CH.
5
If
setting
is
complete, press
LEVEL.
XTS pro
The unique sound quality of the LG Technology creates
the optimum sound for you to play the perfect playback
of the original sound and to feel the living sound source.
Each time you press XTS pro the
following order.
XTS-PRO ON
22
→
XTS-PRO OFF
setting changes
in the
Pre-operation Setup
Initial
In this
General
Settings
system, there
menu
several ways to cusMost menus consist of
Auto
are
tomize the
settings provided.
three levels to set up the options, but some require
greater depth for the variety of settings. If you press
SETUP, only the first and second level of the menu
system
be
will appear
the TV
on
displayed by pressing
levels, you will
label to
help
see
"B"
screen.
The third level
This DVD Recorder Receiver is
the
synthesized
can
navigating the menu
right side of the menu
you go to the next level.
tuner
a
fre-
capable
of
receiving
up to 88 TV
Preparation:
Connect the DVD Recorder Receiver to the desired
type of aerial,
up and exit the Menu:
Press SETUP to bring up the menu. A second press of
SETUP will take you back to initial screen.
as
shown in
Connecting
to the Aerial
page 13.
bring
1
2
To go to the next level:
Press B on the remote control.
Press SETUP.
The
Setup
menu
appears.
Use v / V to select the General
While the General
3
4 option.
5
move
To go back to the previous level:
Press b on the remote control.
General
1
2
Setup
menu
move
move
"Start" icon is
is selected, press B to
Programming
to the third level.
highlighted.
appears.
Use v / V to select the desired
3
4
5
6 press
option.
to the second level.
Press B to
Press SETUP.
The
option
Use v / V to select the Auto
Operation
While the desired item is
option.
selected, press B
to
to the second level.
Use v / V to select the second desired
Press B to
move
option.
to the third level.
Use v / V to select the desired
setting
then
ENTER to confirm your selection.
Some items require additional steps.
7
with
channels.
on
To
equipped
quency
B.For
on
Programming
Press SETUP to exit the
Setup
6
menu.
Press ENTER to
begin the channel search.
The tuner will automatically cycle through all
available channels in the area and place them
in
the tuner's memory.
Note :
After you have connected your DVD Recorder Receiver
for the very first time. If you press SETUP for initial set-
ting,
you
Then you
can
can
only
set the "Auto
set the other
Programming" option.
options.
23
SETUP
Pre-operation Setup (Continued)
Edit
Program
You
can
move,
1
2
edit
channel
a
manually (add, delete,
8
List
Press SETUP.
menu
You
appears.
nels
Use v / V to select the General
3
4 press
move
option
option.
is selected, press B to
to the second level.
Use v / V to select the
perform
manually.
can
a
search to select and store TV chan-
B to
move
"Edit" icon is
program on the Program List
menu then press ENTER.
Program List options appears on the left side of the
Program
Program
Edit
Program
Edit
1. Use v / V to select
While the General
to exit
menu.
Program
Setup
(O) repeatedly
name,
etc.).
The
Press RETURN
option
List
a
menu.
then
to the third level.
2. Use v / V to select
'Program
Edit'
option
from the
options then press ENTER.
Program Edit menu appears.
highlighted.
3.Useb/Btoselecttheitemandpressv/Vto
change the setting.
[PR]
Press ENTER.
5 Program
List
menu
position.
[Seek] Searches for a channel automatically.
Searching stops when the recorder tunes in a
appears.
6Usev/VtoselectaPRnumberthenpress
ENTER.
Program List options
menu display.
indicates the selected programme
appears
on
the left side of the
channel.
[Ch.] Changes
[MFT] Fine
picture.
the channel number.
tunes the channel to obtain
a
clearer
4. Choose OK then press ENTER to confirm the
and returns to the Program List menu.
7
Use v / V to select
an
option
then press ENTER
to confirm.
Program
Edit: Edits the selected program.
Station Rename: Edits the station
Move: Moves the
program's
name.
location
on
the pro-
gram list.
Delete: Deletes the program from program list.
Nicam Auto/Off: Set the NICAM function to for the
program Auto
24
or
Off.
setting
Pre-operation Setup (Continued)
Edit
Program
Sorting
(Continued)
You
Station Rename
You
can name
independently.
Names
be up
can
long.
1. Use v / V to select
program on the Program List
menu then press ENTER.
Program List options appears on the left side of the
Program
List
sort the
manually
program's position
on
the
Program
List
menu.
stations
to 5 characters
can
TV channels
a
menu.
1. Use v / V to select
program on the Program List
menu then press ENTER.
Program List options appears on the left side of the
Program
Program List options then
Keyboard menu appears.
option
from
press ENTER.
menu.
2. Use v / V to select 'Move'
options
2. Use v / V to select 'Station Rename'
List
a
option
from
Program
List
then press ENTER.
3. Use v / V to select
a
desired
position
then press
ENTER to store.
Deleting
You
can
a
program
delete
a
program
1. Use v / V to select
on
the
Program
List
menu.
program on the Program List
menu then press ENTER.
Program List options appears on the left side of the
Program
List
a
menu.
2. Use v / V to select 'Delete'
options
3. Enter
a name
then press ENTER.
for the station. Use vVbBto select
character then press ENTER to confirm your selection.
Setting
?A lphabet
sions in NICAM Stereo.
a
case
Capital:
Switches the
keyboard
upper
characters.
?A lphabet Small: Switches the
case
option from Program List
The Program is deleted.
keyboard
to lower
characters.
the NICAM Auto/Off
This DVD recorder
can
receive Hi-Fi sound transmis-
However, if sound distortion
occurs, due to poor reception, you can switch Off
1. Use v / V to select a program on the Program List
then press ENTER.
Program List options appears
menu
?S y m bol: Switches the
keyboard
to
symbol
charac-
ters.
Program
List
on
the left side of the
menu.
OK: Select to finish.
?
?C a n cel: Select to exit the
space at the cursor position.
Delete: Deletes the previous character at the
Space:
?
?
cursor
Inserts
2. Use v / V to select 'Nicam Auto/Off'
menu.
Auto,
options
position.
b / B: Moves
?
a
from
then press ENTER. If you select
'NICAM' appears on the menu screen.
Program
List
option
cursor
to left
or
right.
Tip
Remote control buttons for
Numbers
ing
(0~9): Enters
location
on
entering
a name
the character of
correspond-
the selected column.
4. Choose 'OK' icon then press ENTER to fix the
and returns to the Program List menu.
name
25
SETUP
Pre-operation Setup (Continued)
Manual Clock Set
1
Press SETUP.
The
Setup
menu
appears.
2
Use v / V to select the General
3
4
5
While the General
6
Enter the necessary information for date and
time.
move
is selected, press B to
option
to the second level.
Use v / V to select the Clock Set
Press B to
b / B
or
move
(left/right):
option.
to the third level.
Moves the
cursor
to the
previous
next column.
v / V
(up/down): Changes
cursor position.
7
menu.
the
setting
at the current
Press ENTER to confirm your setting, then
press SETUP to exit the Setup menu.
26
Pre-operation Setup (Continued)
TV
You
-
-
Aspect
can
Progressive Scan
Ratio
choose:
4:3:
Select when
a
standard 4:3 TV is connected.
16:9:
Select when
a
16:9 wide TV is connected.
Display
Display
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks, but are connecting the
recorder to a standard (analog) television, set
Progressive Scan to [OFF].
If you are using the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set
Progressive Scan to [ON].
Mode
Mode
works
setting
only
when the TV
Aspect
Ratio is set to "4:3".
You
-
-
can
choose:
Letter Box:
Pan Scan:
picture with bands on the
upper and lower portions of the screen.
Automatically displays the wide picture on
the entire screen and cuts off the portions
when the VIDEO OUTPUT switch
that do not fit.
set to RGB
Displays
a
wide
Note:
Scan will be disable in the
Progressive
on
setup
the
rear
menu
panel
is
position.
Caution
Once the
setting for Progressive Scan output is entered,
an image will only be visible on a Progressive Scan
compatible TV or monitor. If you set Progressive Scan to
[ON] in error, you must reset the recorder. First, remove
the disc in the recorder. Next, press STOP (x) and hold
it for five seconds before releasing it. The video output
will be restored to the standard setting, and a picture
will once again be visible on a conventional analog TV
or
monitor.
27
SETUP
Pre-operation Setup (Continued)
PBC
Disc
The PBC
(PBC)
-
ON:
setting
to ON
or
can
be
changed.
Set
Playback
Control
OFF.
Video CDs with PBC
are
to the
played according
language
[Original]Refers
disc
OFF: Video CDs with PBC
as
a
for the disc's
Menu, Audio, and
Subtitle.
PBC.
-
Select
Language
are
played
the
same
way
Audio CDs.
was
to the
original language
in which the
recorded.
language, press number buttons then ENTER to enter the corresponding
4-digit number according to the language code list in
the reference chapter (see page 60). If you enter the
wrong language code, press CLEAR.
[Other]
[Off](for
To select another
Disc
Subtitle)
:
Turn off Subtitle.
Factory Set
If you need to, you can reset the Recorder to all its factory settings. Select ''Set'' icon then press ENTER.
Audio
Note :
Some
Area
options
Code)
cannot be reset.
(Rating, Password,
and
Dolby Digital
[Bitstream]: Select "Bitstream" when enjoying original
Dolby Digital Audio (Set to this mode ordinary).
[PCM]: DVDs encoded in Dolby Digital will be automatically downmixed to two-channel PCM audio (refer
to Audio Channel Selection on page 37).
Language
Display Language
Select
a
display.
language
for the
Setup
menu
and
on-screen
DRC
(Dynamic Range Control)
With the DVD
program's soundtrack in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to [ON] for this effect.
28
format, you
can
hear
a
Pre-operation Setup (Continued)
Lock
If you
(Parental Control)
If you
your password, to clear the current password, follow the procedure below.
Set Password
Changing
the
code
forget your 4-digit
4-digit
code
forget
1. Press SETUP to
display
the
Setup
menu.
2. Use the Number buttons to enter the
number
6-digit
"210499".
3. Select "Ok" then press ENTER. The 4-digit password
is cleared. Enter a new code as shown left.
Rating
Movies
DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
on
information that
1
certain
Press SETUP.
The
Setup
menu
2
3
4
5
6
While the Lock
option.
option is selected, press B to
to the second level.
Use v / V to select the Set Password
Press B to
move
mistake before
to delete
pressing ENTER,
password numbers one by
press b
one
then correct it.
7
8
9
While
is selected, press ENTER.
If you select "Delete" then press ENTER. The password is deleted.
Enter
have certain discs
"Change"
1
2
Follow
move
Follow
shown above to the left
(Set
Rating option.
to the third level.
6 as shown above to the left
tons. One
Eight (8)
has the least
has the most
restrictions.
playback
restrictions.
No limit: If you select No limit, Parental Control is
not active. The disc will play in full.
Level 1 to 8: Some discs contain
scenes
not suit-
able for children. If you set a rating for the Recorder,
all disc scenes with the same rating or lower will be
rated
played. Higher
ENTER
The alternate
lower
Tip
to delete
scenes.
3
step
(Set
4 Password).
5Selectaratingfrom1to8usingthev/Vbut(1)
playback
4-digit password again and press
to verify when "OK" is highlighted.
pressing ENTER, press
password numbers one by
as
Use v / V to select the
unless
repeatedly
with alternate
Password).
Press B to
a
mistake before
played
steps 1-3
Enter the
a
rated from
The Parental Control feature allows you
discs from being played by your children or to
prevent
4-digit password using the numbered
buttons to create a personal 4-digit security
password then press ENTER when "OK" is highlighted.
If you
scenes are
to
a
Tip
repeatedly
or
option.
password yet;
using the numbered buttons to create a personal 4-digit security password,
then press ENTER. Enter the 4-digit password again
and press ENTER to verify when "OK" is highlighted.
If you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER when "OK" is highlighted.
a
the disc. These
scenes on
disc
to the third level.
If you have not entered
Enter a 4-digit password
If you make
complete
try-dependent.
to
move
to the
Level 1 to 8, and alternatively, more suitable scenes are
available for selection on some discs. Ratings are coun-
appears.
Use v / V to select the Lock
applies
an
one.
alternate
If
scenes
scene
scene
no
will not be
is available
one
the disc.
on
must have the same
suitable alternate
playback will stop. You must enter
word or change the rating level in
b
played
scene
rating
or a
is found,
the
4-digit passorder to play the
disc.
then correct it.
6
Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
29
SETUP
Pre-operation Setup (Continued)
Area Code
DivX(R)
Enter the code of
a
country/area
used to rate the DVD video
(See
"Area
whose standards
disc, referring
were
to the list
Codes", page 60.).
VOD
DivX
We
provide you the DivX VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX
VOD service. For more information, visit www.divx.com/vod.
1.
Select
2.
Press ENTER while
[DivX(R) VOD] option
then press B.
is selected and the reg-
[Enter]
istration code will appear.
1
Press SETUP.
The
Setup
menu
appears.
2
Use v / V to select the Lock
3
4
5
6
While the Lock
move
option.
is selected, press B to
to the second level.
option
3.
Use the
registration
videos from DivX
Use v / V to select the Area Code
option.
code to
move
a
Tip
a
mistake before
repeatedly
to delete
pressing ENTER, press
password numbers one by
b
one
then correct it.
7
Select the first character
8
Shift the
9
Press ENTER to confirm your area code selection, then press SETUP to exit the menu.
using
the v / V
buttons.
second
30
using B buttons and select
character using v / V buttons.
cursor
a
disc for
playback
on
this
unit.
password yet;
using the numbered buttons to create a personal 4-digit security password,
then press ENTER. Enter the 4-digit password again
and press ENTER to verify when "OK" is highlighted.
If you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER when "OK" is highlighted.
If you
rent the
www.divx.com/vod. Follow the instructions and
to the third level.
If you have not entered
Enter a 4-digit password
or
VOD service at
download the video onto
Press B to
purchase
the
Note:
All the downloaded videos from DivX
played
back
on
this unit.
VOD
can
only
be
Pre-operation Setup (Continued)
Recording
Auto
Record Mode Set
When
You
10
minutes,
es
automatic
recording, chapter markers
specified interval. You can set this
picture quality for recording; HQ (High
Quality), SQ (Standard Quality), LQ (Low Quality), EQ
(Extend Quality).
can
set the
Record
Aspect
When
recording,
4:3
standard).
Chapter
or
put in
are
interval to 5
15 minutes. If you select
chapter marking off,
at the
no
minutes,
None, it switch-
separations.
SETUP
Ratio
you can set the recording aspect ratio
to suit the material you're recording (16:9 widescreen,
or
DV Record Audio
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
port.
Some
digital
camcorders have two stereo tracks for
audio. One is recorded at the time of
shooting;
the other
is for
over-dubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the over-dubbed sound is used.
31
Pre-operation Setup (Continued)
Disc
Caution
If you want to change the disc format,
recorded on the disc will be erased.
Initialize
If you load a completely blank disc, the "Initialize"
will appear. Select "Ok" then press ENTER. The
menu
Recorder will initialize the disc.
Disc Protect
DVD-R: The Recorder initializes the disc for Video
When
mode. The
matted DVD-RW
recording
mode will
always
be Video
mode.
DVD-RW: The Recorder initializes the disc for VR
mode.
DVD+R/ DVD+RW: The Recorder initializes the disc.
can
format the disc from the
Setup
menu as
below.
1
2
Press SETUP.
The
Setup
menu
appears.
Use v / V to select the Disc
While the Disc
move
option.
is selected, press B to
to the second level.
option
3
4
5
highlighted.
6
DVD-RWs,
7 (DVD-VR DVD-VIDEO)
Use v / V to select the Initialize
Press B to
move
option.
to the third level.
"Start" icon is
Press ENTER.
Initialize
menu
For
appears.
use b
/ B to select
a
mode
then press ENTER.
For DVD+RWs, go to step 8.
or
8
Use b / B to select "Ok" then press ENTER.
It takes a few moments to format the disc.
32
recording
in DVD+RW / +R disc
disc,
set to ON to
or
VR mode for-
prevent accidental
of the disc loaded. If you
need to unlock the disc to make edits, select OFF.
recording, editing
Also, you
everything
or
deleting
Pre-operation Setup (Continued)
Finalize
Disc Label
Finalizing 'fixes' the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu for
navigating the disc. This is accessed by pressing
Use this to enter
MENU/LIST
TITLE.
or
name
appears when you load the disc and when you
disc information on-screen.
?
The disc
?F or
display
be up to 32 characters long.
discs formatted on a different DVD Recorder
name can
Receiver, you will
see
only
limited number of char-
a
acters.
Caution
After
for the disc. This
a name
you've
finalized
DVD-RW,
or a
DVD+R
anything
else
on
a
disc
recording
on a
DVD-R,
disc, you can't edit or record
that disc except on a DVD+RW
disc.
Follow
1
2
steps 1-3
Use v / V to select the Disc Label
Press B to
1
Follow
steps 1-3
as
shown
on
3
4 Keyboard
page 32
2
3
4
Press B to
move
option.
page 32.
option.
to the third level.
highlighted.
menu
appears.
to the third level.
highlighted.
Press ENTER.
Finalize
menu
appears.
5
5
on
Press ENTER.
Use v / V to select the Finalize
Finalize is
move
"Edit" icon is
(Initialize).
shown Initialize
as
Select "Ok" then press ENTER.
The recorder starts
finalizing
long
finalization takes
the disc.
how much is recorded
titles
on
the disc. A
4 minutes
or more
on
depends
the
heavily
disc,
on
the
type
of
disc,
?
can
doing this,
you
Symbols:
Switches the
keyboard
keyboard
?
Cancel: Select to exit the
If you load a DVD-RW that has already been finalized,
you can 'unfinalize' it by choosing Unfinalize from the
edit and
keyboard
to
to lower
characters.
OK: Select to finish.
?
can
Switches the
?
to finalize.
After
Capital:
to
symbol
char-
acters.
take up to
Tip
menu.
character then press ENTER to confirm your
selection.
a
case
?
Finalize
for the disc. Use vVbBto select
upper case characters.
?A lphabet Small: Switches the
and the number of
recorded disc
a name
?A lphabet
Note :
How
Enter
space at the cursor position.
Delete: Deletes the previous character at the
Space:
cursor
?
re-
Inserts
menu.
a
position.
b / B: Moves
cursor
to left
or
right.
record onto the disc.
6
Choose OK then press ENTER to
and return to the Setup menu.
7
Press SETUP to exit the
save
the
name
menu.
33
SETUP
Pre-operation Setup (Continued)
Overview for the On-Screen
This manual
Disc Information On-screen
Display
You
operating the
DVD Recorder Receiver. Some DVDs require specific
operation or allow only limited operation during playback. When this occurs, the symbol
appears on the
TV screen, indicating that the operation is not permitted
by the DVD Recorder Receiver or is not available on the
gives
basic instructions for
loaded
1
2
disc.
Displaying
While
to
Watching TV
Information While
viewing
display the
the TV channels, press ENTER
information displayed on-screen.
Indicates channel
various information about the disc
display
can
Display
on-screen.
Press DISPLAY
information
To
repeatedly to display/change
displayed on-screen.
the
the On-Screen
Display, press
DISPLAY repeatedly until it disappears.
See the descriptions on the following pages for
detailed explanations of displays as a disc is
playing.
remove
Recorder Status Icon
number, station
Resume
name, and audio signal (STEREO,
MONO) received by the tuner.
Action
play
Displays
from this
prohibited
or
point
not available
PR-06
STEREO
Notes :
ABC
Some discs may not provide all of the features on the
On-Screen Display, examples shown the below.
If
no
button is
Display
01/01/2005
will
pressed
disappear.
for 10
seconds, the On-Screen
13:35
Indicates current date and time.
DVD
Menu
VR
Video
+RW
+R
Function (Use v / V to select desired option)
Options
Title Number
1/6
Chapter
Number
4/26
Time Search
00:10:30
Audio
Language
(DVD only) and Digital
Audio Output Mode
Subtitle
Language
Angle
DivX
D
2CH
Shows the current title number and total number of
titles, and skips to the desired title number.
b/B,or
Numbers, ENTER
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
b/B,or
Numbers, ENTER
Shows the elapsed playing time, and
searches the
OFF
1/3
point by
the
elapsed
time
directly.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes
ABC
Selection Method
the
the
b/B
setting.
Shows the current subtitles language, and
changes
Numbers, ENTER
b/B
setting.
Shows the current angle number, total number of
angles, and changes the angle number.
b/B
Function (Use v / V to select desired option)
Selection Method
VCD
Menu
Options
Track Number
1/6
Time
Audio Channel
34
00:10:30
Stereo
Shows the current track number and total number of tracks
or PBC On mode, and skip to the desired track number.
Shows the elapsed playing time, and
searches the
point by
the
elapsed
Shows the audio channel, and
changes
the audio channel.
time
directly.
b/B,or
Numbers, ENTER
Numbers, ENTER
b/B
DVD and Video CD
DVD or Video CD
Operation
General Features
Playback
Playback Setup
Tu rn the TV
on
Note :
and select the video
input
source con-
nected to the DVD Recorder Receiver.
Audio
the
System: Turn the Audio System on and select
input source connected to the DVD Recorder
Unless stated
the Remote Control. Some features may also be available on the Setup menu.
DVD
Press OPEN/CLOSE
(Z)
to open the disc
2
Load your chosen disc in the tray, with the
playback side down.
3
Press OPEN/CLOSE
READING appears
If
start, press B
cases, the disc
might
menu
does not
playback
A
menu
is
loading
DVD
a
or
DVD
Use the bBvVbuttons to select the
view, then press ENTER
Press TITLE
or
to
title/chapter
start playback.
MENU/LIST to return to the
you
menu
display.
Use the number buttons to select the track you want
to view.
Press RETURN
one
title, you
can move
to
follows:
use
v / V to select the title
icon.
Then, press the appropriate numbered button
(0-9)
or
b / B to select
a
title
on a
disc has
a
title number.
more
than
one
chapter/track,
you
to another
(O)
to return to the
1.
Press SCAN
2.
Press SCAN
display.
Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions
on
each
menu
Setup
3.
menu.
(m
or
M) during playback.
(m
required speed.
or
M) repeatedly
To exit SEARCH
Still Picture and
Notes :
to select the
DVD, DivX; 4 steps (forward and backward)
Video CD; 3 steps (forward and backward)
menu screen.
You may also set PBC to OFF in the
See page 28.
mode, press B (PLAY).
Frame-by-Frame Playback
1. Press PAUSE/STEP
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
"Rating",
as
than
Search
VCD
--
more
chapter/track as follows:
Press SKIP (. or >) briefly during playback to
select the next chapter/track or to return to the beginning of the current chapter/track.
Press SKIP (.) twice briefly to step back to the
previous chapter/track.
To go directly to any chapter/track during playback,
press DISPLAY. Then, use v / V to select chapter
icon (or for a Video CD, select track icon). Then, enter
the chapter/track number using the numbered buttons
(0-9) or press b / B.
displayed
may be displayed first after
Video CD that contains a menu.
want to
disc has
can move
Tip
a menu
+R
CHAPTER/TRACK Selection
If
appear
instead.
If
+RW
Press DISPLAY then
tray.
the display window, and
automatically.
(PLAY).
a
another title
to close the
starts
playback
some
on
(Z)
VR
Video
tray.
If
In
use
TITLE Selection
Receiver.
1
otherwise, all operations described
page 29).
--DVDs may have a Region Code.
Your recorder will not play discs that have
(see
2.
(X) on the remote control during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP (X) repeatedly.
To e xit PAUSE mode, press B (PLAY).
on
code different from your recorder. The
this Recorder is 2 (two).
region
region code
a
for
35
PLAYBCK
DVD and Video CD
General Features
Operation (Continued)
Time Search
(Continued)
The Time Search function allows you to start
at any chosen time on the disc.
Slow Motion
1. Press PAUSE/STEP
(X) during playback.
1. Press DISPLAY
The Recorder will enter PAUSE mode.
2. Press SCAN
(m
M) during
or
(m
appears on the TV screen.
The Time Search box shows the elapsed
PAUSE mode.
to select the
M)
or
required
speed.
DVD;
DivX;
2. Within 10
The "--:--:--"
3. Within 10
the
Note :
Slow motion
playback
in
reverse
is not
possible
with
4
Repeat
-
desired
Chapter: repeats
Title:
current title
repeats the
Off: does not
repeat mode.
chapter.
Repeat Track/All/Off
-
a
desired
Setup
or
in the
You
invalid time.
Within 3
menu
to
PBC, you
use
the
must set PBC to OFF in
Repeat
function. See page
A-B
a
sequence in
2. Press A-B
the
starts from the selected time
VR
+RW
on
+R
during playback
again
or
still
Each press of the ZOOM button
the sequence shown below.
→
x4 size
→
zoomed
3. To
changes
the disc.
VCD
playback
a
title:
at your chosen
icon and 'A-B' appears
ending point.
on
to acti-
the TV
display
the TV screen, and
repeat sequence begins.
repeatedly
to
in
normal size
move
through
the
picture.
resume
normal
repeatedly
press CLEAR or press
until the normal picture appears.
playback,
The Zoom function may not work for
3. To cancel the sequence, press A-B
select Off.
36
to confirm the start
Note :
1. Press A-B at your chosen starting point.
Repeat icon and 'A-' appears on the TV screen.
Repeat
an
in the box.
seconds, press ENTER
Video
ZOOM
repeat
not enter
can
x2 size
28.
To
right
2. Use the bBvVbuttons to
Video CD with
Repeat
hours, minutes, and
vate the Zoom function.
Note :
the
the number buttons to enter
start time. Enter
1. Press ZOOM
repeat mode.
(DivX disc).
does not play repeatedly.
a
use
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
folder
On
appears in the Time Search box.
seconds from left to
DVD
.
repeats the current track.
All: repeats the all tracks on the Video CD
Off:
Display.
Zoom
Track:
?
v / V to select the Time
play repeatedly.
Press REPEAT to select
?
a
the current
Video CDs, DivX
?
display
seconds,
required
Playback
Repeat Chapter/Title/Off
Press REPEAT to select
?
use
time.
DVD Discs
?
time
If you enter the wrong numbers, press CLEAR. Then
enter the correct numbers.
Video CDs.
?
seconds,
Search icon in the On-Screen
steps (forward
backward)
4 steps (forward only)
Video CD; 3 steps (forward only)
4. To e xit Slow Motion mode, press B (PLAY).
playing
of the current disc.
and
4
The On-Screen
Display
The DVD Recorder Receiver will enter SLOW mode.
3. Use the SCAN
during playback.
playback
some
DVDs.
DVD and Video CD
General Features
Operation (Continued)
(Continued)
Camera
Marker Search
You
nine
can
points
To enter
1.
start
playback
from
a
memorized
point. Up
to
be memorized.
can
If the disc contains sequences recorded from different
camera angles, the angle icon appears briefly on the TV
screen. You can then change the camera angle if you
wish.
mark, follow these steps.
a
1. Press DISPLAY
During disc playback, press MARKER when
playback reaches the spot that you want to
The Marker icon will appear
on
the TV
The On-Screen
appears on the TV screen.
2. Use v / V to select the Angle icon in the On-Screen
screen
1 to enter up to nine Marker
Repeat step
during playback.
Display
memorize.
2.
Angle
DVD
briefly.
points
Display.
3. Use b / B to select the desired
on a
The number of the current
disc.
angle.
angle appears
on
the TV
screen.
To Recall
or
Clear
1.
disc
Marked Scene
a
Changing
During
playback, press SEARCH.
The Marker Search menu will appear on the TV
seconds,
use
b / B to select the marker
number that you want to recall or clear.
3. Press ENTER and playback starts from the marked
scene.
DVD
Press AUDIO then press b / B repeatedly during playback to hear a different audio language (DVD only) or
screen.
2. Within 10
the Audio Soundtrack
Or, Press CLEAR and the marker number is
audio soundtrack if available.
Audio Channel Selection
VR
Video
+RW
+R
VCD
erased from the list.
4. You
any marker
the marker search menu.
can
play
by inputting
its number
on
Press AUDIO then press b / B repeatedly during playback to hear a different audio channel (STEREO, LEFT
or
the Contents of DVD Video
Reviewing
Discs: Menus
DVDs may contain menus that allow you to access
special features. To open the disc menu, press
MENU/LIST. Then, press the appropriate number button
to select
an
highlight
your selection, then press ENTER.
option. Or,
Title Menu
use
the bBvVbuttons to
RIGHT).
With DVD-RW discs recorded in VR mode that have
both
Bilingual audio channel, you can
switch among Main (L), Sub (R), Main+sub (L+R), or
Mono by pressing AUDIO.
a
main and
a
Note :
The Audio Channel Selection will
Dolby Digital is set
(refer to "Audio" on
operate when the
to PCM mode in the
page
Setup
menu
28).
DVD
1. Press TITLE.
If the current title has
on
the TV
screen.
menu, the menu will appear
Otherwise, the disc menu may
a
appear.
2. The
may contain camera
guage and subtitle options, and
menu
Disc Menu
angles, spoken lanchapters for the title.
DVD
1. Press MENU/LIST.
The disc
2. To
menu
remove
is
displayed.
the disc menu, press MENU/LIST
again.
37
PLAYBCK
DVD and Video CD
Subtitles
DVD
Operation (Continued)
PIP
DivX
(Picture-in-Picture)
DVD
Press SUBTITLE then press b / B repeatedly during
playback to see the different subtitle languages.
Instant
DVD
Skip
Video
VR
+RW
Each press INSTANT SKIP
skips
+R
VR
Video
+RW
+R
VCD
This function enables you to view the stored stations in
the sub picture during playback.
VCD
forward 15 seconds.
Note :
If
appears, the feature is not available
Last Condition
Memory
This Recorder memorizes the
user
on
the disc.
DVD
settings
for the last
disc that you have viewed. Settings remain in memory
even if you remove the disc from the Recorder or switch
off the Recorder. If you load a disc that had its settings
memorized, the latest stop position is automatically
recalled.
--
Input
stored in memory for use any time.
This Recorder does not memorize settings for a disc if
Settings
are
you switch off the Recorder before
play the disc.
commencing
to
PIP On and Off
Press PIP to switch
again
Notes :
--
Turning
on
the sub
picture,
press PIP
to switch it off.
source
selection for sub
picture
Press AV to select the
input source for the sub
picture. Each time AV is pressed, each input source
available for the sub picture is displayed as shown
below.
Tuner→AV1→AV2→AV3→AV3Opt→AV4→DV
Program
Use PR
selection for sub
(v
/
picture
the program if sub picture's
is Tuner. The selected program number
V)
input source
is displayed on
to
change
the TV
selected program
Sub
screen.
by pressing
You
display
(x).
can
STOP
picture position change
Press b / B repeatedly until desired position is
achieved. The sub picture moves clockwise or
counterclockwise.
38
the
Playing
DivX Movie Disc
a
this DVD Recorder Receiver you can play back
DivX files on the CD-R/RW or DVD±R/RW. Before play-
Using
ing
DivX
files, read "About DivX movie files"
on
the
Press SETUP. The
2.
Press
Setup menu appears.
SETUP b [LANGUAGE] b [Disc Subtitle]
the language you have found.
select
right.
Refer to "Disc Menu/Audio/Subtitle"
on
Note:
This recorder cannot
Memory
back the DivX
file(s)
in the
a
If the subtitle still does not
disc and close the
appears
on
the TV
tray. The MOVIE
page 28.
Tip:
card.
Insert
1
play
then
menu
screen.
display properly
after the
proceeded, press and hold SUBTITLE about
3 seconds during playback.
The new language code number selected is displayed
on upper-right of the TV screen.
steps
1-2
code
Language
for
change sequency
Hungarian,
Czech and Polish:
LANGUAGE 1
b
code
Language
LANGUAGE 1
b
LANGUAGE 2
for Russian:
change sequency
LANGUAGE 2
b
LANGUAGE 3
About DivX movie files
Press v / V to select
2
folder, and press ENTER.
a
A list of files in the folder appears. If you are in
list and want to return to the Folder list, use
v / V buttons
on
the remote to
DivX disc
file
a
and
highlight
follows:
720x576
?
If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY.
The file
(W
?
name
If there is
H) pixel.
of the DivX subtitle is available
impossible code
displayed as
?
disc with mixed content
and DivX
you can select menu screen. Press
word on top on the menu is highlighted.
a
b / B to select
use
MP3/WMA, JPEG,
MOVIE then press ENTER.
You can view TV channel or video
pressing
?
files),
TITLE and
Then,
(MP3/WMA, JPEG,
If the number of the
RETURN
input
by
tle does not
Find
a
subtitle
suitable Disc Subtitle
on
the
Disc Subtitle
figure
played
DivX file:
Language
Original, English
English
French, German,
Italian, Spanish,
Po r tuguese
French, German, Italian,
Spanish, Portuguese
Russian
Russian
Other 6976
Greek
Other 7665
Polish, Hungarian, Czech
Other 8482
Turkish
on
Playable
support GMC.
".avi", ".divx"
except those listed above is
the TV
not dis-
screen.
Codec format:
"DIVX3.xx", "DIVX4.xx",
"DIVX5.xx", "XVID ", "3IVX".
for the DivX
Available DivX Subtitle
outputted.
Playable DivX subtitle: ".smi", ".srt",
".sub (Micro DVD, Subviewer 1-2 format only)",
".txt (Micro DVD, T1-4 format only)"
?
below.
audio is
?
when the DivX subti-
language
or
Playable
?
following notice
display properly.
operate normally.
?
the DivX subtitle
Please refer to
30 per 1
This recorder does not
Divx subtitle
displaying
over
display.
?
menu, press MENU/LIST.
Notice for
the
on
file,
If the video and audio structure of recorded file is not
interleaved, either video
If you want to return to the
(O).
not
mark
frame is
screen
or
source
"
_
second, this unit may
a
47
by
to express in the DivX
"
it may be
Tip:
1.
x
characters.
Press STOP to exit.
On
with this recorder is limited
?A v ailable resolution size of the DivX file is under
press ENTER.
3
4
as
compatibility
Playable Audio format: "Dolby Digital", "PCM", "MP3",
"DTS (DIGITAL OUT only)"
?
Sampling frequency:
?
Bit rate: within 32
-
within 8
-
48 kHz
(MP3)
320kbps (MP3)
Dutch, Swedish
39
PLAYBCK
Audio CD and MP3/WMA
Playing
file
an
Audio CD
MP3
CD
Operation
MP3/WMA
or
Additional
:
Deletes the selected file form the memory
card.
:
Deletes all files form the memory card.
this DVD Recorder Receiver you can play back
MP3/WMA files on the CD-R/RW or DVD±R/RW. Before
playing MP3/WMA files, read
Recordings" on the right.
(To
use
"Notes
on
MP3/WMA
view MP3/WMA files in the memory card.
can
for memory card
WMA
Using
Also, you
options
memory card,
see
9.)
page
Notes
on
MP3/WMA
MP3 / WMA disc
ited
Audio CD
?
as
Recordings
compatibility
with this
player
is lim-
follows:
within 32
48 kHz (MP3),
Sampling frequency:
32 48kHz (WMA)
Bit rate: within 32 320kbps (MP3),
32
192kbps (WMA)
-
within
-
Once you insert an audio CD
screen. Press v / V to select
B
(PLAY)
ENTER and
or
appears on TV
track then press
a menu
a
playback
?
-
-
starts.
?
The recorder cannot read
file extension other than
a
MP3/WMA file that has
an
".mp3" /
".wma".
?
CD-R
?
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is impos-
physical
format should be ISO 9660
sible to
that
playback MP3 / WMA files. We recommend
you use Easy-CD Creator, which creates an ISO
9660 file
?
File
names
must
?
system.
They
should have
incorporate
should not
a
maximum of 8 letters and
.mp3 or .wma extension.
contain special letters such as
an
/ ?
*
:
"<>letc.
?
MP3 / WMA
1.
2.
a
folder, and press ENTER
to
the folder contents.
Press v / V to select
ENTER.
the disc should be less
on
than 999.
Press v / V to select
see
The total number of files
Playback
a
This DVD Recorder Receiver
ings
track then press B
(PLAY)
or
starts.
requires
discs and record-
to meet certain technical standards in order to
achieve
optimal playback quality. Pre-recorded DVDs
are automatically set to these standards. There are
many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these
require compatible playback.
Customers should note that
permission
is
required
in order to download MP3 / WMA files and music
from the Internet. Our company has no right to
grant such permission. Permission should always
be
Tips
If you
Folder
in
are
a
file list and want to return to the
and press
highlight
ENTER to return to the previous menu screen.
Pressandholdv/Vtogotothenext/previous
list,
use
the v/V to
page.
On a disc with mixed content
and DivX
you can select menu screen. Press
word on top on the menu is highlighted.
files),
TITLE and
Then,
use
a
b / B to select
then press ENTER.
You can view TV channel
pressing
RETURN
(O).
menu, press MENU/LIST.
40
(MP3/WMA, JPEG,
MP3/WMA, JPEG,
or
video
input
or
source
DivX
by
If you want to return to the
sought
from the
copyright
owner.
Audio CD and MP3/WMA
Pause
MP3
CD
1. Press PAUSE/STEP
Operation (Continued)
WMA
Repeat
To
(X) during playback.
2. To return to
playback, press
PAUSE/STEP (X) again.
N
(PLAY)
or
press
repeat
A-B
a
sequence in
Tr a ck Selection
Press SKIP .
>
or
MP3
briefly
or
to return to the
3. To
e xit
A-B
The
to
again
Repeat icon
screen, and the
briefly during
playback to go to the next track
beginning of the current track.
Press SKIP . twice
The
WMA
step back
to the pre-
a
WMA
track:
1. Press A-B at your chosen starting point.
Repeat icon and 'A' appears on the menu
2. Press A-B
CD
MP3
CD
at your chosen
and 'A
-
ending point.
B' appears
on
the
icon
menu
repeat sequence begins.
the sequence and return to normal
again.
Repeat
screen.
disappears
from the
play,
press
menu screen.
vious track.
On
an
Audio
CD,
track number
playback
on
to go
directly
to any
track,
the numbered buttons
using
enter the
(0-9) during
the Track List.
Repeat Track/All/Off
MP3
CD
WMA
Press REPEAT to select
?
TRACK:
?
ALL
?
OFF
a
desired
repeat mode.
repeats the current track.
repeats the all tracks on the disc.
:
(No display):
Search
does not
play repeatedly.
CD
1. Press SCAN
(m
or
M) during playback.
The Recorder will enter SEARCH mode.
2. Press SCAN
(m
or
M)
to select the
required
(backward) or MX2,
speed: mX2, mX4, mX8
MX4, MX8 (forward).
Search speed and direction are
indicated
on
the
menu
display.
3. To
e xit
SEARCH
mode, press B (PLAY).
41
PLAYBCK
Audio CD and MP3/WMA
Operation (Continued)
Programmed Playback
The program function enables you to store your favorite
tracks from any disc in the recorder's memory. A program can contain 99 tracks (Audio CD) or 256 tracks
(MP3/WMA).
1.
2.
3.
Insert
a
You
1.
can
disc.
?
Audio CD
?
Select
Select
a
"
track
menu
appears.
the List.
on
"
icon then press ENTER to place the
selected track on the Program list. Repeat to place
You
can
""
on
add all tracks in the disc. Select
icon then press ENTER.
previous
on a
disc.
playing
a
disc. The
repeat icon
a
desired
repeat mode.
TRACK:
repeats the current track
ALL: repeats all the tracks on programmed list.
does not
Off(No display):
play repeatedly.
Note :
If you press SKIP (>) once during
back, the repeat playback cancels.
Repeat
Track
page.
Erasing
1.
2.
a
Track from
Program
List
Use vVbBto select the track that you wish to
erase from the Program list.
Press CLEAR.
ENTER to
list.
Select
"
the
Or, select
erase
Repeat
Erasing
to
"
"
icon then press
the selected track on the Program
erase
additional tracks
Complete Program
on
the list.
List
", then press ENTER. The complete Program
for the disc is erased.
Note:
The programs
removed.
Example)
5.
Press B
(PLAY)
or
Audio CD
ENTER to start.
in the order in which
Playback begins
you programmed the tracks.
all of the tracks on the Program
Playback stops after
list have played once.
42
play-
the list.
Select the track you want to start playing on the
Program list. Press and hold v / V to move to the
next /
track/all
Press REPEAT to select
?
MP3/WMA
a
Press REPEAT when
Audio CD and MP3/WMA Discs:
or
play
Tracks
appears.
2.
additional tracks
4.
Repeat Programmed
are
also cleared when the disc is
JPEG File
Viewing
Operation
JPEG file
a
Notes
Using this DVD Recorder Receiver you can view JPEG
files on the CD-R/RW or DVD±R/RW. Before playing
JPEG
read "Notes
files,
JPEG
on
Recordings"
on
?
JPEG
on
Recordings
upon the size and number of JPEG files, it
could take a long time for the DVD Recorder Receiver
Depending
to read the disc's contents. If you don't
the
display after
be too large
several
screen
right.
minutes,
see an on-
some
of the files
reduce the resolution of the
may
JPEG files to less than 5M pixels as 2760 x 2048
---
Also, you
memory card,
use
1.
view JPEG files in the memory card.
can
Insert
see
9.)
page
disc and close the
a
appears
the TV
on
(To
pix-
els and burn another disc.
tray.
The JPEG
?
menu
The total number of files and folders
on
the disc
should be less than 999.
screen.
?
Some discs may be incompatible due to
recording format or the condition of disc.
?
Ensure that all the selected files have the
sions when
?
into the CD
different
".jpg"
exten-
layout.
If the files have
rename
?
copying
a
File
them
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
without
names
be read
by
the files
are
".jpg"
extension will not be able to
this DVD Recorder Receiver. Even
shown
as
JPEG
image
though
files in Windows
Explorer.
2.
Press v / V to select
folder, then press ENTER. A
a
list of files in the folder appears. If you are in
list and want to return to the previous Folder
the v / V buttons
on
the remote to
a
file
list,
use
highlight
then press ENTER.
3.
If you want to view a particular file, press
v / V to highlight a file then press ENTER
B
The selected
(PLAY).
image
is
displayed
or
in full
screen.
Press ENTER to appear
4.
To
stop viewing
The
at any
menu screen
disappear
or
this
menu.
time, press STOP.
appears.
Tip:
?
If you
list,
are
use
in
file list and want to return to the Folder
the v/V to
return to the
?
a
and
highlight
previous menu screen.
press ENTER to
Pressandholdv/Vtogotothenext/previous
page.
?
On
disc with mixed content
a
DivX
files),
word
you
can
and
a
use
b / B to select
on
top
select
on
the
(MP3/WMA, JPEG,
Press TITLE
menu screen.
menu
is
and
highlighted. Then,
MP3/WMA, JPEG,
or
DivX then
press ENTER.
?You
can
pressing
view TV channel
RETURN
(O).
or
video
input
source
by
If you want to return to the
menu, press MENU/LIST.
43
PLAYBCK
JPEG File
Slide Show
Use v V b B to
JPEG
Operation (Continued)
To listen to music while slide show
JPEG
the
highlight
(Slide Show)
then press ENTER.
Slide Show starts from the selected file if
?
move
There
>>
the
menu
is not II
to
on
(Off).
are
four Slide
>
Speed options (
(Slow) and II (Off).
Use v V b B to
use
Speed option
viewing a file, you can press
previous menu (JPEG menu).
(Normal),
Then,
You
While
to the
highlight
the
)
: >>>
Speed options (
option you want
b / B to select the
STOP
(Fast),
to
1.
The recorder will
2.
now
To return to the slide
PA USE/STEP
Moving
during
cursor
viewing
to the next
a
(. or >) or
picture to advance
To rotate
Press v / V
picture
Zoom
picture
:
Deletes the selected file form the memory
card.
:
Deletes all files form the memory card.
press
B) once while
or previous file.
or
to rotate the
pic-
counter clockwise.
enlarge
the
photo image. (see
36
for memory card
all files to the memory card.
JPEG
Use ZOOM to
44
or
a
menu.
Copies
JPEG
during showing
ture clockwise
(b
the JPEG
:
JPEG
Press SKIP
options
on
use
again.
to another File
disc.
icon then press ENTER
Additional
to MP3/WMA
the selected file to the memory card.
go into PAUSE mode.
or
Select
on a
listening
Copies
slide show.
show, press B (PLAY)
music files recorded
files while
:
JPEG
Press PAUSE/STEP
display photo
can
).
then press ENTER.
Still Picture
simultaneously
JPEG
page)
Basic
Basic
Recording
Recording
from TV channels
Follow the instructions below to record
Recording
starts
disc is full
or
Switch
1
on
immediately
stop the recording.
the recorder and load
Also make
a
a
2
3
Press TV/DVD to select the TV mode
during recorddisplay window.
2
ing. The TV indicator appears in the
Using the TV, select the channel to be
input source is set to
completely blank disc,
recording mode as necessary by pressing
REC MODE repeatedly. (HQ, SQ, LQ, EQ)
HQ; High Quality, SQ; Standard Quality,
LQ: Low Quality, EQ: Extended Quality
Use PR
(+/-)
Instant Timer
buttons to select the TV channel to
easily
1
2
TV Audio Channel
select the audio channel
AUDIO
audio channel is
Stereo
Recording
or mono
Bilingual
during viewing TV program.
displayed on-screen.
broadcast: Stereo
broadcast: Main+Sub
to listen
(language)
→
Left
Main
→
→
by
The current
Sub
If the sound is of poor quality when set to
can often improve it by changing to Mono
a
Follow
steps 1-4
from
TV
a
as
shown left
(Basic Recording
channels).
Press REC
(z) repeatedly to select the recording time length.
Recording starts after the first press. Each
additional press increases the recording time by
At the end of the
the DVD Recorder
Receiver will
and shut off.
Stereo, you
(Left
allows you to make a recording
without using the program
10 minutes within the available free space.
The recording time is displayed on the TV screen.
Right
→
of
Recording
preset length
timer.
record.
can
viewed.
that the TV's
sure
a
pressing
?
1
Instant Timer
Changing
You
TV program while watch-
recordable disc.
this recorder. If you load a
the recorder takes a short while to initialize the disc.
Set
one
another
ing
TV program.
and continues until the
you
To record
recording,
stop recording
or
Right).
?
This recorder
record either NICAM
can
audio. If the NICAM
setting (page 24)
then if the broadcast is
cally changes
to NICAM and you
audio is
always
regular
is set to
Auto,
NICAM, the audio automati-
NICAM audio. If the broadcast is
regular
or
can
record the
Instant Timer
recorded.
Checking
Press REC
remaining
program.
the
(z)
Time
Recording
to check the
once
time will be
displayed
recording
on
the TV
time. The
screen
for
a
moment.
Press REC
4 Recording
(z)
once.
will start.
(The
display window.)
Recording continues
REC indicator
lights
in the
To record for
a
fixed
Recording
Press STOP
(x)
on
to
To Extend the
The
until you press STOP
(x)
the disc is full.
5
Menu
non-NICAM, the
If NICAM sound distortion occurs, due to poor
reception, you can switch off NICAM setting of the
Timer
Recording
length
right.
of
time,
see
Instant
or
recording
ing REC (z).
stop recording.
Recording
(X)
be extended
anytime by
press-
by
Caution
If the Recorder is
1. Press PAUSE/STEP
can
Each additional press increases the recording time
10 minutes within the available free space.
while the
To Pause the
time
Time
Recording
unplugged (or
Recorder is recording,
there is
power failure)
the recording will be
a
lost.
to pause the disc
during
recording.
2. When you want to continue
PAUSE/STEP (X).
recording,
press
45
RECODING
Timer
Recording
This DVD Recorder Receiver
be
programmed
period of 1 month.
can
to
record up to 7 programs over a
For
unattended recording, the timer needs to be set with the
channels to be
Enter the necessary information for your timer
2 recording(s).
?
recorded, the starting time and length.
?
Note:
?
If you
blank disc for timer
completely
use a
you must format the disc before
(Refer to "Initialize" on page 32.)
recording,
starting timer recording.
?
menu
--
Press ENTER after
filling
Press TIMER REC to
programming,
will appear.
Check field's "Rec. OK"
indicates that the timer
Choose
memorized program number, or
of the external inputs from which to record.
--
one
Date
?
Start Time
--
?
End Time
?
Mode
EQ,
AT
--
--
a
date up to 1 month in advance.
Set the
Set the
Choose
--
AT).
(Auto) mode
recording ending
record mode
a
time.
(HQ, SQ, LQ,
determines how much disc time
is available and switches record
mode, if
?
?
Repeat
(Monday
Choose
--
Friday),
-
VPS/PDC
a
--
desired
or
option
to
On, AT
repeat (Once, Daily
Weekly).
The VPS/PDC
system automatically
the
recording time so that even if a program is not running to schedule, you won't miss
it. For VPS/PDC to work properly, you must input
adjusts
the correct announced time and date of the program you want to record.
Note that VPS/PDC may not work with every station.
Notes :
?
Stations that
use
VPS/PDC
typically
include
VPS/PDC information in the teletext TV
guide
pages. Please refer to these pages when setting a timer recording.
?
When
where
using VPS/PDC,
the beginning of
recorded.
46
there may be instances
the program is not
is
programmed
recordable disc is inserted.
5
(O)
to exit the
Program
List.
Notes :
?
The timer indicator
lights in
standby with
the
Recorder is in
the timer active.
?You must press POWER to
Note :
When you set the VPS/PDC
mode is not available.
recording
Make sure that you load a recordable disc and
press POWER to switch your unit to Standby.
?
?
a
the Timer Record List
4
neces-
the program.
complete recording
and
on
the Timer Record List
Press RETURN
time.
recording starting
or
sary, to
correctly
a
Choose
?
Timer Record List.
Press ENTER, the program will be memorized
by the DVD Recorder Receiver.
To check the
PR
display
will appear.
3
?
in all the program infor-
mation.
Press TIMER REC.
The Timer Record
(left/right) moves the cursor left/right
v / V (up/down)
changes the setting at the current cursor position
Press RETURN (O) to exit the Timer Record
--
menu.
?
1
b / B
display
window if the
stop the timer recording.
There is a short delay when a timer recording finishes to
confirm the recorded program. If two timer recordings are
set to record sequentially (one right after the other), the
very beginning of the later program may not be recorded.
Timer
Timer
This
Recording (Continued)
Recording
with ShowView
System
system makes programming timer recordings very
simple.
Most TV
ShowView
guides publish
programming
numbers with their program details.If you want to make
a timer recording of a program, you just input the
ShowView
corresponding
The
date, start, stop and
programming number.
channel settings are made
automatically. All you have to do is tell the recorder the
recording mode and quality, and whether it's a onceonly recording, or a regular recording.
Up to 7 timer programs can be stored in the recorder.
1
Programming
Details
Recording
be checked whenever the DVD
can
Recorder Receiver is turned
on.
Press TIMER REC
twice.
?
Use v / V to select
?
Press ENTER to edit the selected program.
Timer Record menu appears.
?
Press CLEAR to
a
timer
recording.
RECODING
the selected program
from the Timer Record List.
remove
Press ShowView.
The ShowView
will appear.
Press ShowView again to exit the
menu
menu.
Canceling
You
can
clear
ing actually
?
Number
--
Enter the ShowView
programming
?
number.
?
2
Timer
Reviewing
Repeat Choose
or Weekly).
--
a
desired
repeat (Once, Daily,
Use the number buttons then press ENTER to
enter the ShowView programming number.
To check the
programming,
will appear.
?
b / B (left/right)
?
the Timer Record
the
menu
left/right
If you make a mistake before pressing ENTER,
press CLEAR repeatedly to delete password
numbers one by one then correct it.
--
move
cursor
3Useb/BtomovethecursortotheRepeat
Repeat option
column then
use v
/ V to select
(Once, Daily (Monday
Press ENTER after
4 information.
The Timer Recorder
change
etc.)
the
settings
-
Friday),
or
Weekly).
filling
in all the program
menu
will appear. You
as
can
required (Mode, VPS/PDC,
a
Timer
timer
a
Recording
setting anytime
before the record-
starts.
Use v / V to select
program you want to remove
the Timer Recorder List. If you want to remove the
program, press CLEAR.
a
The confirm message will appear.
"Ok" then press ENTER.
Timer
Stopping
a
After
recording
timer
a
use
Recording
has
steps
2-5 as shown
5 (Timer Recorder).
on
previous
page
Progress
can
still cancel
the program.
Press POWER.
?
Timer
Even
Recording Troubleshooting
though
the timer is set, the Recorder will not
record when:
?
There is
no
disc loaded.
?Anon-recordable disc is loaded.
?
Disc Protect is set to ON in the
page 32).
?P ower is turned
Setup
menu
(see
?
There
on.
already 99 titles (DVD-R/RW),
(DVD+R/RW) recorded on the disc.
are
You cannot enter program for a timer
?Arecording is already underway.
Follow
b/B to select
in
started, you
on
?
The time
?
There
If two
?
49 titles
recording
if:
you're trying to set has already passed.
are already 7 timer programs set.
timer programs overlap:
The earlier program takes priority.
or more
?After the earlier program
finishes, the later program
starts.
?
If two programs are set to start at exactly the
time, the program entered first takes priority.
If the disc is
same
damaged, the recording may not be
pleted successfully. In this case even though the
field shows "Rec.
OK", it may
com-
Check
not be.
47
from
Recording
from External
Recording
You
can
record from
camcorder
external
1
or
External
an
an
external A/V
VCR, connected
Input
Source
Components
Recording
device, such
You
as a
to any of the Recorder's
can
from
record from
the DV IN
port
digital camcorder connected to
front panel of this Recorder. Using
a
the
on
Digital Camcorder
a
the Recorder's remote, you can control both the
Camcorder and this Recorder.
inputs.
Make sure that the
want to
component you
record from is connected
properly
Before
to the DVD
DV IN
make
recording,
port is
set up
sure
(see
that the audio
page
input
for the
31).
Recorder Receiver. See pages 15-16.
2
Press AV
repeatedly
to select the external
input
Tips
to record from.
?
The
?Tuner: Built-in tuner.
?
Some camcorders cannot be controlled
?AV1: EURO AV1 AUDIO/VIDEO mounted
on
back
?
on
back
panel.
?AV3: AUDIO IN 3 / VIDEO IN 3 mounted
?AV4: INPUT 4
mounted
on
AUDIO
(VIDEO,
front panel.
?DV: DV IN mounted
on
(L/R),
back
on
S-VIDEO
signal
must be DVC-SD format.
panel.
IN)
If you connect a second DVD Recorder Receiver using a
DV cable, you cannot control the second DVD from this
one.
?You can't control this unit
connected to the DV IN
front
this
using
Recorder's remote.
panel.
?AV2: EURO AV2 AUDIO/VIDEO mounted
source
remotely
from
a
component
port.
?You can't record date and time information from
panel.
a
DV
cassette.
Note :
AV3
Opt
will not be recorded.
Load
a
1
recordable disc.
3
Select
4 pressing
the
recording
REC MODE
mode
as
necessary
2
by
Make sure your Digital Camcorder is connected
to the front panel DV IN port. See page 16.
Check that the DV audio
You
repeatedly.
?DV
the
HQ; High Quality, SQ; Standard Quality, LQ: Low Quality,
Press REC
5 Recording
(z)
once.
(The
REC indicator
lights
in the
display window.)
continues until you press STOP
require.
(original audio)
and
of
information.
(x)
or
the
3
Press AV
4
Find the
a
on
Press STOP
fixed
length
of
time,
see
Instant Timer
want to
to
?
If your source is copy-protected using CopyGuard, you will not
be able to record it using this Recorder. See Copyright on page
9 for more details.
display
place on the
the recording
window and
on
input.
the TV
screen.
Camcorder tape that you
to start from.
results, pause playback
at the
point
from which
Depending
on
your
Camcorder, you
can use
Recorder's remote to control the Camcorder
stop recording.
Note :
to select the DV
you want to record.
page 45.
(x)
repeatedly
DV appears in the
For best
To record for
6
you
(over-dubbed audio).
Input is set from the DV Rec Audio in sub-menu
Setup menu. See DV Rec Audio on page 31 for
more
disc is full.
Recording
as
Quality
will start.
Recording
choose between Audio 1
is
Audio 2
(HQ, SQ, LQ, EQ)
EQ: Extended
can
input
this
using
the
STOP, PLAY and PAUSE functions.
5
Press REC
(z)
once
to start
recording.
automatically stopped if the
Recorder detects no signal.
?You can pause or stop the recording by pressing
PA USE/STEP (X) or STOP (x). You cannot
?
Recording
is
control the Camcorder from this Remote Control
during recording.
?
In Video
mode, the final frame of the recording
may remain
?
48
displayed
on screen
for
a
while after
recording stops.
For timer recording to work properly on this
Recorder, the Digital Camcorder must also be
switched on and be operating.
Recording
from
External
an
Input
connect
camcorder to this
DV-equipped
recorder using a single DV cable for input and output of
audio, video, data and control signals.
This Recorder is only compatible with DV-format
(DVC-SD) camcorders. Digital Satellite Tuner, PCs,
and D-VHS Video Recorders are not compatible.
can
a
?
?You cannot connect
a
(Continued)
DV-Related
What is DV?
You
Source
than
more
one
You may see the following messages appear
screen when using the DV IN port.
your TV
on
Not connected to Camcorder
The Camcorder is not connected
properly,
or
the
Camcorder is switched off.
DV camcorder at
time to this Recorder.
?You cannot control this Recorder from external
ment connected via the DV IN
Messages
port (including
equip-
two
Too many devices connected
The DV IN port on this Recorder
just
one
supports connection
to
Camcorder.
DVD
?
It
Recorders).
may not be possible
to
always
ed Camcorder via the DV IN
?
Digital
Camcorders
stereo
16-bit/48kHz,
can
or
control the connect-
port.
usually
record audio
Check the tape
There is no cassette loaded into the connected
equip-
ment.
as
twin stereo tracks of 12-
bit/32kHz. This Recorder
can
only
record
audio track. Set DV Rec Audio to Audio 1
one
or
stereo
Uncontrollable device
This Recorder cannot control the Camcorder.
Audio 2
required (see page 31).
?A udio input to the DV IN port should be 32 or 48kHz
(not 44.1kHz).
Picture disturbance on the recording may occur if the
source component pauses playback or plays an
as
Updating
Information
Camcorder is
information for DV.
updating
?
unrecorded section of
source
component,
or
if the power fails in the
tape,
the DV cable becomes disconor
Although DV Rec Audio is set to Audio 2 and Audio
signal is not present, DV Rec Audio will be reset to
Audio 1 automatically.
Camcorder is set to
camera
mode.
Troubleshooting
nected.
?
Camera mode
2
If you can't get a picture and/or audio
port, check the bullet points:
?M ake
sure
through
the DV IN
the DV cable is
properly connected.
connected equipment then
?Try
switching off the
switching back on.
?Try switching the audio input.
Note :
Depending
on
the connected
be able to control it
using
Camcorder, you may
the Remote Control
not
supplied
with this Recorder.
49
RECODING
Title List and
List Menu Overview
Chapter
Using the Title List menu you can edit video content.
The editing features available in the Title List menu
depend on whether you are editing video on DVD, and
whether you're editing Original content, or a Playlist.
There
45
67
two ways to edit VR mode DVD-RW discs.
directly edit the Original content of the disc, or
are
You
can
you
can
create and edit
a
Playlist.
The
Playlist
doesn't
any of the content on the disc, but
controls how the content is played back.
actually change
Press MENU/LIST to
1.
123
Playback
should be
display the Title List
stopped when you do
When
selecting titles, use the
play the previous/next page if
just
menu.
this.
v / V buttons to dis-
there
are more
than
six titles.
If you are editing a VR mode disc, press
MENU/LIST to switch between Original and
Playlist
menu.
On the left side of the
main
part of the
screen are
screen
the
menu
options.
1.
options: To display menu option, select a title
or chapter then press ENTER. The options displayed
differ depending on the disc type.
[Chapter] Displays Chapter List of the title.
[Combine] Combines two chapters into one (page
54).
[Delete] Deletes the title or chapter. (page 53)
[Delete Part] Deletes a part of the Title (page 53).
[Divide] Divides a title into two (page 56).
[Full Play] Starts playback of the selected title
including the hidden chapters.
[Hide (Show)] Hides (or Shows) the selected title
or chapter. (page 56)
[Move] Moves a chapter on the Chapter ListPlaylist menu to a position on the menu.
(page 55)
[Play] Start playback of the selected title or chapter. The hidden titles and chapters on the
DVD+R/RW cannot be play back.
[Playlist Add] Adds the title or chapter to the
Playlist. (page 52)
[Protect] Protects accidental recording, editing or
deleting of the title. (page 55)
[Title Name] Edits the title name. (page 54)
[Title] Displays Title List of the chapter.
2.
Indicates the record
The
shows thumbnails of the titles
(or chapter) on the DVD. You can change these thumbnails using the THUMBNAIL button---see Changing Title
Thumbnails
on
page 51.
Press DISPLAY to
title
on
display
the Title List
the information of selected
menu.
After
selecting a title or chapter on the Title List or
Chapter List menu, then press ENTER. The menu
options appears on the left side of the menu. Use v /
to select a option then press ENTER to confirm your
V
selection.
2.
To exit the Title List menu, press RETURN
(O)
repeatedly.
Menu
mode, free space, and elapsed
time progress bar.
3.
Current media
4.
Currently
5.
Thumbnail
6.
Shows the selected title number and total number of
selected title.
titles.
7.
Shows the title name, recorded
length.
50
date, and recording
Title and
Chapter Editing
Edits you make to the Original content change the actual content of the disc. For example, if you delete a title
or
chapter
that title
from the
Original
content
(Title
Chapter),
disc, freeing up
or
chapter is deleted from the
extra recording time.
When you edit the Playlist, on the other hand, you are
not changing the content of the disc. For example, when
you delete a title from the Playlist, you are just telling
the Recorder not to play that title; nothing is actually
or
deleted from the disc.
Titles, Chapters,
Titles in the disc's
original
content contain
one or more
chapters. When you insert a title into the Playlist, all the
chapters within that title also appear. In other words,
chapters in the Playlist behave exactly as chapters on a
DVD-Video disc do. Parts are sections of Original or
Playlist titles. From the Original and Playlist menu, you
can add or delete parts. Adding a chapter or title to the
Playlist creates a new title made up of a section (ie.,
chapter) of an Original title. Deleting a part removes
part of a title from the Original or Playlist menu.
Caution
?
When
editing using
tions, the
?
the
Delete, Add,
or
exactly
set in the starting and ending points display.
During Playlist playback, you may notice a momentary
pause between edits. This is not
a
malfunction.
You
+RW
+R
chapter marker anywhere in a Playlist or
Original title during playback.
Once the chapter is marked, you can use the Chapter
put
can
Search
a
feature,
well
as
as
delete, combine and
chapters in the Chapter List-Original
Playlist menu.
or
Chapter
move
List-
Chapter markers are inserted at regular intervals automatically. You can change this interval from the Initial
Setup menu (see Auto Chapter on page 31).
1
2
the title
Play
At the
(Original
Playlist).
or
you want to start a new chapter,
press CHP ADD.
A chapter marker icon appears on the TV screen.
?You
point
can
also
put chapter markers in while record-
ing.
Changing Title Thumbnails
Move func-
start and end frames may not be
VR
Markers
Note :
VR
and Parts
Adding Chapter
as
VR
+RW
+R
Each title
displayed in the Title List menu is represented
by a thumbnail picture taken from the start of that title or
chapter.
If you prefer, select a different still picture from within a
title.
1
Play
the title
(Original
Playlist).
or
Press THUMBNAIL to make the
2 played picture
Original
The still
or
the
Playlist
one
currently
dis-
that appears in the
menu.
picture that you choose
Original or Playlist menu.
appears in both the
Tip
You
change the thumbnail picture of the title on
the Chapter List-Original or Chapter List-Playlist menu.
Select a chapter on the Chapter List-Original or Chapter
List-Playlist menu, then press THUMBNAIL. The thumbnail picture of the title that includes the chapter is
changed.
can
also
51
EDITNG
Title and
Making
a
Chapter Editing (Continued)
New
Playlist
Use this function to add
an
VR
Original
title
or
chapter
to
the
Playlist. When you do this, the whole title is put into
the Playlist (you can delete bits you don't need later
see Deleting a Title/Chapter on page 53).
Adding
Playlist
Additional
You
Original title or chapter
already registered.
can
The title appears in the Playlist complete with the chapter markers that appeared on the Original. However, if
even
1
if it is
Choose
an
an
Original
title.
Use v / V to select
add up to 999 chapters to one disc If you
want to add a chapter of a title, use the Adding a
.
title/chapter
1
to the
Choose
Playlist
chapter
a
to
Playlist
title
put into
2 options
'Playlist'
from
left side of the
Original
menu
then press ENTER.
this page.
chapter on the Original menu
to put into the Playlist, then press ENTER.
Original (Title or Chapter) options appear on the left
side of the Original menu.
a
title
on
only
or
Playlist, then press ENTER.
Original menu options appear on the
screen.
can
title
to
the
you add more chapter markers to the Original later,
these are not automatically copied over into the Playlist
You
to the
VR
add
---
Title/Chapters
or
Use v / V to select
2 options
'Playlist'
from
Original
then press ENTER.
3
Choose
Title
a
tered to insert
List-Playlist that is already regisa title or chapter, then press
ENTER.
The title
or
chapter
appears in the
updated Playlist
menu.
4
Repeat steps 1-3 to
ter on the Playlist.
3
Select 'New
The
new
chapters
52
then press ENTER.
title appears in the updated Playlist. All
of the title are added to the Playlist.
Playlist'
to
or
(O) to exit, or MENU/LIST
the Title List-Original menu.
Press RETURN
5 back
add additional title
chapto go
Title and
Deleting
VR
a
Chapter Editing (Continued)
Title/Chapter
+RW
+R
Deleting
Video
You
If you erase a title or chapter from the Playlist menu on
DVD-RW discs formatted in VR mode, you only remove
it from the Playlist; the title/chapter remains in the
Original
menu.
If you choose to delete a title or chapter from Title List
or Chapter List menu, the title or chapter is actually
deleted from the disc and the
remaining time available
for recording increases. Titles/chapters deleted from the
Original are also removed from the Playlist.
1
2
a
delete
can
VR
Part
part which you do
a
not want in the title.
Press MENU/LIST
Title
repeatedly to display
List-Original or Title List-Playlist menu.
Use vVbBto choose
a
title you want to
delete then press ENTER.
The options appears on the left side of the
3
Select 'Delete Part' from the
4
Press ENTER.
options
on
menu.
the
menu.
Note :
It may not be possible to delete
than 5 seconds long.
1
On the Title List
2
Chapter
chapter or
or
bBto choose a
delete then press ENTER.
Options
chapters
on
appears
that
List menu,
less
use vV
title you want to
the left side of the
Select 'Delete' from the
are
options
on
screen.
the
menu.
Title Edit
(Delete Part)
menu
appears
on
the TV
screen.
'Start Point' icon is
Press ENTER to confirm.
3
The confirm message for
4
Use b / B to select 'Ok' then press ENTER.
The selected chapter or title is deleted.
After
pressing ENTER,
displayed.
5
6
Repeat steps
1
-
deleting
the new,
will appear.
updated
menu
Starts
is
4 to continue to delete from the
(O) repeatedly
to exit the menu.
If
more
titles
?
name
repeatedly deleted,
the
is
to 'Deleted Title'.
than two titles
are
the deleted title's
recording,
are
combined into
and
use
to find the
Press ENTER at the
pause step, search and
starting point.
of the section
starting point
you want to delete.
'End Point' icon is highlighted.
The
When DVD+RW
changed
?
6
menu.
Press RETURN
playback
5 slow-motion
Notes :
?
highlighted.
part is indicated
on
the
Progress
Bar.
7
Use pause step, search and slow-motion to find
the ending point.
8
Press ENTER at the
ending point
of the section
you want to delete.
You can cancel the selected point, use v / V to
select 'Cancel' icon then press ENTER.
one.
When you are deleting a title or chapter, only the last
one on DVD+RW increases remaining recording time.
9
After you finish editing, select the 'Done' icon
then press ENTER.
The confirm message for
10
deleting
will appear.
Use b / B to select 'Ok' then press ENTER.
The selected part is deleted from the title and Title
List-Original
or
Title
List-Playlist
menu
appears.
53
EDITNG
Title and
Naming
You
1
VR
Title
a
can name
titles
Video
+RW
Combining
+R
VR
independently.
On the Title List menu, use vVbBto choose
the title you want to name then press ENTER.
Options
2
Chapter Editing (Continued)
on
appears
the left side of the
menu.
Use vVbBto select the 'Title Name'
menu
+RW
Chapters
+R
Use this function to combine two
Original chapters
Into One
into
adjacent Playlist
or
one.
Note :
option
This function is not available if there is
only
one
chapter
within the title.
then press ENTER.
Keyboard
Two
appears.
1
On the
ter of
Chapter List menu, select the first chapthe two chapters you want to combine
then press ENTER.
Chapter List options appear
on
the left side of the
menu.
2
3
Enter
a name
Use vVbBto select 'Combine'.
The combine indicator appears between the two
chapters you want to combine.
for the title. Use vVbBto select
character then press ENTER to confirm your
selection. Refer to step 5 as shown on page 33
a
(Disc Label).
3
4
Choose OK then press ENTER to save the
and return to the previous menu display.
5
Press RETURN
(O) repeatedly
name
to exit the menu.
Notes :
?
Names
?F or
be up to 32 characters long.
discs formatted on a different DVD Recorder
can
Receiver, you will
?
When
recording
see
on
discs, the entered
a
limited character set.
DVD-R, DVD+R
name
Recorder Receiver
54
only
only
is
or
displayed
DVD+RW
on
after finalization.
the DVD
Press ENTER to confirm.
After
pressing ENTER,
played.
the
updated
menu
is dis-
Title and
Moving
a
Chapter Editing (Continued)
VR
Playlist Chapter
Protect
Use this function to re-arrange the playing order of the
Playlist chapters on the Title List-Playlist menu.
Note :
This function is not available if there is
1
Select
a
chapter
from the
only
one
chapter.
Chapter List-Playlist
menu.
Press ENTER.
2 Chapter List-Playlist options
of the
appear
on
the left side
menu.
Use vVbBto select 'Move' from
3 options
a
Title
Use this function to
editing
1
2
or
deleting
+RW
+R
protect against accidental recording,
of the title.
Press MENU/LIST to
display
Use vVbBto choose
a
the Title List
title you want to pro-
tect then press ENTER.
Options appear on the left side of the
3
Select 'Protect' from the
4
Press ENTER to confirm.
menu.
screen.
options.
Playlist
then press ENTER.
The lock mark will appears
on
the title's thumbnail.
Tip
4
Use vVbBto choose the
you want to
move the chapter to then press ENTER.
After pressing ENTER, updated menu is displayed.
place
If you select a title that has already been protected on
the Title List menu, you can 'unprotect' it by choosing
"Protect" from the Title List menu options. After doing
that, you
can
edit and delete the title.
55
EDITNG
Title and
Hide
You
a
can
Chapter Editing (Continued)
+RW
Chapter
skip playing chapters
+R
without
Dividing
deleting
from the
Use this command to
disc.
1
On the
List menu,
Chapter
choose a chapter
use
vVbBto
1
2
split
a
menu
options
appears
on
the left side of the
appear
on
the left side of the
screen.
2
options.
Select 'Divide' from the Title List
3 highlighted.
Title Edit
Press ENTER to confirm.
chapter's
(Divide)
thumbnail will dim.
Current
If you select a chapter that is already dim on the
Chapter List menu, you can 'show' it by choosing
"Show" from the Chapter List menu options. After
are
able to
see
menu
menu
option
options.
is
appears and goes into
STOP mode.
Tip
that, you
titles.
screen.
Select 'Hide' from the
The
new
title you want to
a
Press ENTER after the 'Divide'
3
+RW
title up into two
On the Title List menu, select
divide then press ENTER.
The
you want to hide then press
ENTER.
Options
One Title Into Two
picture
The first title's
doing
thumbnail
the title.
The second
title's thumbnail
4
Use pause step, search and slow-motion to find
the point you want to divide the title.
5
When the 'Divide'
ENTER at that
You
option
point.
can remove
the
is
highlighted, press
dividing point
and exit the Title
Edit
(Divide) menu, use v / V to select 'Cancel'
option then press ENTER. The division point is
removed.
6
Choose 'Done'
the
option
dividing point.
then press ENTER to fix
The title is divided into two
4 minutes to divide.
56
new
titles. It take up to
Additional Information
+RW
Overwriting Recording
To overwrite
a new
video
recording
previously
on a
recorded
title, follow these steps. This feature is not
available for DVD+Rs, that always record at the end of
the Disc.
1
Select
input
you want to record
source
REF NC
(TV
channel, AV1-4, DV).
Press MENU/LIST to
2
the Title List
display
menu.
3
To
back
play
Most
3
4
title you want to
DVD
regular
al that
Press REC
Overwrite
(z) to start overwrite recording.
recording starts from the start point of
new
(x)
stop the overwrite recording.
to
title is created and
updated
menu
is dis-
played.
Notes :
This function is not available for
If the overwrite is
of the current
than
longer
title, the
protected title.
the recording length
a
next title is overwritten. But
if next title is
the
the
title.
protected,
starting point of the
overwriting stops
players
Viewing
at
players
+RW
You
can
DVD
menu
+R
view the Title List
player
that is
capable
displayed on the other
playing DVD+RW or
menu
of
also
can
mode, finalized
with the other
DVD+RWs.
DVD-RW discs
not. Check the
or
player
play
or
manu-
to check what formats
play.
'saves' the
that the disc
can
be
recordings and editings in place so
played on a regular DVD player or
computer equipped with
a
suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen
navigating the disc. The menu can be accessed by
pressing MENU/LIST or TITLE.
To finalize
a
disc, refer
to "Finalize"
on
for
page 33.
Notes :
Unfinalized DVD+RW is
playable
on
regular
DVD
play-
ers.
displayed
Recorders or Players
other DVD
on
finalized discs
mode, finalized DVD+R
The edited contents of
Title List
play
can
Disc)
a
the
Finalizing
Press STOP
The
came
of discs it will
title.
5
A small number of
recorded in VR
write.
(PLAY).
Recordings on
Players (Finalizing
recorded in Video
Use vVbBto choose
B
or
want
Your
Other DVD
over-
title, select the title you
then press ENTER
Playing
a
a
a
DVD+RW disc is
compatible
regular DVD players only after finalization.
Any edited contents of the DVD+R disc are not
compatible on regular DVD players. (Hide, chapter
combine, added chapter mark, etc.)
How long finalization takes depends on the type of
on
disc, how much is recorded
ber of titles
on
on
the
disc, and the
num-
the disc.
DVD+R discs.
1
2
Insert DVD+R
or
Press TITLE in
Title List
menu
DVD+RW disc recorded
play
or
already.
stop mode.
will appear
as
shown below.
Tip
You
can remove
STOP
the Title List
menu
by pressing
(x).
57
Radio
Operation
the Radio Stations
Presetting
You
can
preset
make
tuning,
50 stations for FM and AM
Before
(MW).
that you have turned down the vol-
sure
Preset radio stations in the DVD Recorder Receiver's
memory first
ume.
1
2
3
Press FM/AM
AM
on
the remote control until FM
(MW) appears
in the
display
or
or
TUN.+
on
indication starts to
Scanning stops
in
change,
a
(for
stereo
program)
7
2 edly
on
appear in the
3
display
the remote control.
on
or
PR/PRESET-
the remote control to
repeatselect the preset sta-
Adjust the volume by rotating VOLUME on the front
panel or by pressing VOLUME + or on the remote
control repeatedly.
-
Press POWER to turn the DVD Recorder Receiver off
preset number will flash in the display window.
Press PR/PRESET-
or
PR/PRESET-
remote control to select the
Press ENTER
or
on
the
preset number you
on
the remote control.
Use manual
TUN.+
Press TUN.-
station with
a
or
tune in the station
TUN.+
a
weak
repeatedly
in
automatic
tuning,
on
on
tuning
press TUN.-
in
step
or
step
3 to
To clear all the stored stations
Press and hold ENTER for about five seconds and
then press
stations
display
are
TUN.+
on
repeatedly.
tuning,
press and hold TUN.-
the remote control for about three
or
sec-
the remote control.
FM program is noisy
Press MO./ST. on the remote control
the
2.
For your reference
If
"MEM CLEAR" is
etc.,).
signal
manually.
appeared in
ENTER again, the
or
For automatic
onds
To tune in
AV 2
(AV 1,
To listen to non-preset radio stations
the remote control
3 to 6 to store other stations.
Repeat steps
select another function mode
For manual
The station is stored.
window and
cleared.
If you have accidentally entered into the "MEM
CLEAR" mode and you do not wish to clear the
mem-
ory, do not press any key. After a few seconds, the
"MEM CLEAR" display will go off by itself and change
to normal mode.
58
FM appears in the
Each time you press this button, the DVD Recorder
Receiver tunes in one preset station at a time.
then
want.
6
left).
To turn off the radio
Press ENTER
A
or
the
window.
Press PR/PRESET-
the
when the Recorder Combi Receiver tunes
station. "ST"
(MW)
on
tion you want.
window.
5
display
radio stations"
The last received station is tuned in.
release.
4
1
remote control for about three seconds until the
frequency
(see "Presetting
Press FM/AM until AM
window.
And then every time you press FM/AM, FM and
AM (MW) changes alternately.
Press and hold TUN.-
to the Radio
Listening
an
so
that "ST" dis-
appears in the display window. There will be no
stereo effect, but the reception will improve. Press
this button
To
again
to restore the stereo effect.
improve reception
Reorient the supplied antennas.
Radio
RDS
Operation (Continued)
Programme Search (PTY)
Operation
This unit is
equipped with RDS (Radio Data System),
brings a wide range of information to FM radio.
which
Now in
use
in many countries, RDS is a
station call signs or network
transmitting
description of
system for
information,
A
ability to encode broadcasts with Programme Type (PTY) codes that indicate
the type of material being broadcast. The following list
a
station programme type text message
about the station or specifics of musical selection and
the correct time.
benefit of RDS is its
shows the abbreviations used to indicate each PTY
along
with
an
explanation
of the PTY.
REF NC
NEWS
News
AFFAIRS
Current Affairs
INFO
Information
SPORT
Sports
EDUCATE
Educational
DRAMA
Drama
CULTURE
Culture
SCIENCE
Science
VARIED
Varied
POP M
Popular
ROCK M
Rock Music
EASY M
Easy Listening
LIGHT M
Classical Music
CLASSICS
Serious Classical Music
OTHER M
Other Music
WEATHER
Weather Information
FINANCE
Financial
CHILDREN
Children's
SOCIAL
Social Affairs
PTY
RELIGION
Religious
Broadcasts
the
(Programme type recognition)- The name of
programme type is shown in the Display Window.
PHONE IN
Phone-In
Programmes
RT
(Radiotext)-
TRAVEL
Travel and
LEISURE
Leisure and
JAZZ
Jazz Music
COUNTRY
Country
NATION M
National Music
OLDIES
Oldies Music
FOLK M
Folk Music
DOCUMENT
Documentary Programmes
TEST
Station Alarm Test
ALARM 1
Emergency
RDS
Tuning
When
a
FM station is tuned in and it contains RDS
the unit will
and the
well
as
major
automatically display
RDS indicator will light in
the
Display
sign
Window
indicators for the RDS services programme
programme type recognition (PTY), Radiotext (RT)
(PS),
as
and Clock Time
RDS
if transmitted
(CT)
by
the station.
Display Options
The RDS
system
is
of
capable
transmitting
wide
a
of information in addition to the initial call
variety
that appears when
RDS operation the
display
broadcast network
or
types
sign
station is first tuned. In normal
a
will indicate the station name,
call letters. Pressing RDS on the
remote control enables you to
data
the station's call
data,
cycle through
the various
in the sequence:
(PS↔FREQUENCY↔PTY ↔RT↔CT)
PS
(Programme
Service
channel is shown in the
The
name)Display Window.
name
of the
A "text" message contains special
information from the broadcast station. Note that this
message may scroll
across
the
display
to
permit
message.
CT
(Time
controlled
by
the
channel)-
Enables the
unit to receive the actual time and show it in the
Display
Window.
ote
Some RDS stations may not choose to include some
of these additional features. If the data required for the
selected mode is not
Window will show
a
being transmitted,
PTY
the
Display
NONE, RT NONE, CT
NONE, PS NONE message.
Speech Programme
Music
Music
Programmes
Programmes
Programmes
Touring
Hobby
Music
Message
Broadcast Information
You may search for a specific
by following these steps:
Programme Type (PTY)
Press BAND to select FM mode.
1
Press
the
2 show the last
PTY
on
will
3
4
Press PTY
remote
PTY in use.
repeatedly
When the PTY is
control, the display
to select
a
desired PTY.
selected, press and hold PTY.
The unit will go into an automatic search mode.When
station is tuned, the search will stop.
a
59
Language Code
and Area Code List
Language Codes
Use this list to
your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
input
Language
Code
Abkhazian
following
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Galician
7176
7771
Somali
8379
6577
Georgian
7565
7783
Spanish
6983
Arabic
6582
German
6869
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
Greek
6976
Maltese
7784
Swahili
8387
Assamese
6583
Greenlandic
7576
Maori
7773
Swedish
8386
Azerbaijani
6590
Guarani
7178
Marathi
7782
8476
Bashkir
6665
Gujarati
7185
Moldavian
7779
Tagalog
Tajik
Basque
Bengali; Bangla
6985
Hausa
7265
Mongolian
7778
Tamil
8465
6678
Hebrew
7387
Nauru
7865
Tatar
8484
Bhutani
6890
Hindi
7273
7869
Telugu
8469
Bihari
6672
Hungarian
7285
7879
Thai
8472
Breton
6682
Icelandic
7383
7982
Tibetan
6679
Bulgarian
6671
Indonesian
7378
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Burmese
7789
Interlingua
7365
Pashto, Pushto
8083
Tigrinya
Tonga
Byelorussian
6669
Irish
7165
Persian
7065
Tu rkish
8482
Cambodian
7577
Italian
7384
Polish
8076
Tu r kmen
8475
Catalan
6765
Japanese
7465
Por tuguese
8084
Twi
8487
Chinese
9072
Javanese
7487
Quechua
8185
Ukrainian
8575
Corsican
6779
Kannada
7578
Rhaeto-Romance
8277
Urdu
8582
Croatian
7282
Kashmiri
7583
Rumanian
8279
Uzbek
8590
Czech
6783
Kazakh
7575
Russian
8285
Vietnamese
8673
Danish
6865
Kirghiz
7589
Samoan
8377
Volapuk
8679
Dutch
7876
Korean
7579
Sanskrit
8365
Welsh
6789
English
Esperanto
6978
Kurdish
7585
Scots Gaelic
7168
Wolof
8779
6979
Laothian
7679
Serbian
8382
Xhosa
8872
Estonian
6984
Latin
7665
Serbo-Croatian
8372
Yiddish
7473
Faroese
7079
Latvian, Lettish
7686
Shona
8378
Yoruba
8979
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
an area
Area
code from this list.
Code
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
AR
Ethiopia
Fiji
FJ
Maldives
MV
SN
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
Pa raguay
PY
Ukraine
UA
CZ
Japan
JP
Philippines
PH
United States
US
Denmark
DK
Ke nya
KE
Poland
PL
Uruguay
UY
Ecuador
EC
Kuwait
KW
Por tugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
Afghanistan
Argentina
Czech
60
Republic
AF
Area
SG
SK
UG
Troubleshooting
Check the
following guide
for the
possible
of
cause
a
before
problem
service.
contacting
Solution
Cause
Symptom
No power.
The power cord is disconnected.
Plug the power
securely.
No
TV/DVD mode for the recorder is set to
Press TV/DVD
TV.
repeatedly to choose DVD mode. TV
indicator disappears in the display
picture.
cord into the wall outlet
the remote control
on
window.
The TV is not set to receive DVD
Select the
Recorder Receiver
on
signal output.
appropriate video input mode
so the picture from the DVD
the TV
Recorder appears
The video cable is not connected
on
the TV
Connect the video cable
screen.
securely.
securely.
No sound.
The connected TV power is turned off.
TurnontheTV.
The
Select the correct
equipment connected with the
audio cable(s) is not set to receive
Recorder Receiver signal output.
The audio cables
are
DVD
Audio Receiver
input
mode
the
on
you can listen to the
sound from the DVD Recorder Receiver.
not connected
so
Connect the audio cable
securely.
securely.
The
playback picture
The power of the equipment connected
with the audio cable is turned off.
Tu rn
The audio
Replace
connecting
The disc is
is
cord is
on
the
equipment
connected with
the audio cable.
damaged.
it with
new one.
Clean the disc.
dirty.
poor.
No disc is inserted.
The DVD Recorder
Insert
a
disc.
cator in the
Receiver does not start
playback.
An
unplayable
disc is inserted.
Insert
a
placed upside
down.
indi-
(Check the disc
system, and regional code.)
playable
type, color
The disc is
(Check that the disc
display window is lit.)
disc.
Place the disc with the
side
playback
down.
The disc is not
placed
within the
Place the disc
guide.
inside the
dirty.
Clean the disc.
The
level is set.
Cancel the
the
The video
The
picture from the
external input is distort-
ponent is
signal from the
copy-protected.
external
tray correctly
Rating
function
or
change
level.
You cannot connect via this Recorder.
com-
Connect the
to your
component directly
TV.
ed
Some channels
skipped over
usingv/V.
rating
the disc
guide.
The disc is
Rating
on
Those channels
are
are
not stored in the
Restore channels. See
Recorder.
when
The
picture or sound of
broadcasting channel is
weak or missing.
Aerial
The
The recorder's
picture from the
external input is not
or
on
cables
are
loose.
source
Edit"
pages 24-25.
Tighten
is incorrect.
"Program
connections
or
replace
cable.
Use AV to select
AV2, AV3, AV3
input channel (AV1,
Opt, AV4 or DV)
shown.
Radio stations cannot
be tuned in.
?
The antenna is
positioned
or
connected
poorly.
?
The
signal strength
weak (when tuning
tuning).
of the stations is too
in with automatic
?
Connect the antenna
?
Adjust
securely.
the antennas and connect
an
external antenna if necessary.
?Tune in the station
manually.
61
REF NC
Tr oubleshooting
(Continued)
The disc
Can't
play a disc
recorded using this
Recorder
on
Solution
Cause
Symptom
Some
another
was
recorded in Video mode.
Finalize the disc.
will not
No solution.
players
play
final-
even a
ized disc recorded in Video mode.
player.
The disc
was
recorded in VR
The other
mode,
player must
order to play it.
ble in
Cannot record
not record
did
or
Discs recorded with copy-once material
cannot be played on other players.
No solution.
The
Use another disc.
remaining
blank space
on
The
source
copy
compati-
you
are
to record is
trying
setting
the
channel is tuned
When
on
to
recording
the
recording channel,
a
the TV's
own
Video mode
programs that are copy-once
cannot be recorded.
is not
You cannot record the
source.
Select the channel
the Recorder's
protected.
When
recording
possible.
the disc
be RW
is insufficient.
successfully.
Timer
(page 33)
tuner.
built-in TV tuner.
disc,
Use
protected
on
VR mode formatted disc for copymaterial.
once
a
Clock in DVD Recorder Receiver is not
Set clock to correct time. See "Auto
set to correct time.
Clock Set"
or
"Manual Clock Set"
on
page 26.
Timer has been
programmed
incorrectly.
Timer record indicator
appear after
Stereo Audio Record
and/or
Playback
TV is not
is not
present.
Timer. See "Timer
Reprogram
Recording"
light does
programming timer.
not
Reprogram
on
Stereo-compatible.
No solution.
Broadcast program is not in stereo for-
No solution.
page 46.
Timer.
mat.
DVD Recorder Receiver A/V Out
are
not connected to TV A/V In
jacks
jacks.
Make A/V connections. Stereo is
available
only
via A/V
output from DVD
Recorder.
DVD Recorder Receiver Audio/Video Out
is not selected for
Select AUX
or
A/V
source as
TV
input.
at the TV.
viewing
DVD Recorder Receiver's TV audio
Set TV audio channel mode to Stereo.
channel is set to
See
mono.
"Changing
TV audio channel"
on
page 45.
The Remote Control
The Remote Control is not
does not work
remote
properly.
sensor on
pointed
at the
the DVD Recorder.
Point the Remote Control at the remote
sensor on
The Remote Control is too far from the
Operate
the DVD Recorder Receiver.
the Remote Control within 7
m.
DVD Recorder Receiver.
There is
an
obstacle in the
path
of the
Remove the obstacle.
Remote Control and the DVD Recorder.
The batteries in the Remote Control
are
Replace
the batteries with
new ones.
exhausted.
Resetting
the recorder
If you observe any of the
The unit is
or
but the power will not turn
The
panel display is not working.
recorder is not operating normally.
can
reset the recorder as follows:
Press and hold the POWER button for at least five
following symptoms...
off.
The front
62
plugged in,
...you
on
seconds. This will force the unit to power off then
turn the unit back on.
the power
and then plug it in
Unplug
cord, wait
again.
at least five
seconds,
Specifications
General
Power
requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Television
AC
220-240V, 50/60 Hz
140W
435
x
57x 372
mm
(w
x
h
x
d)
4.9Kg
5˚C to 35˚C
REF NC
5 % to 90 %
system
PAL
I, B/G, I/I, SECAM D/K, K1 colour system
Recording
format
PAL
Recording
format
DVD Video
Recording
Recordable discs
Recordable time
DVD-VIDEO
DVD-ReWritable, DVD-Recordable, DVD+ReWritable, DVD+Recordable,
DVD
4
recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
Recording,
(4.7GB): Approx. 1 hour (HQ mode), 2
hours (LQ mode), 6 hours (EQ mode)
hours
(SQ mode),
Video
27MHz
MPEG 2
48kHz
Dolby Digital
Playback
Frequency
response
Signal-to-noise
ratio
Harmonic distortion
Dynamic
range
DVD
(PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to
DVD(PCM96kHz):8Hzto44kHz
More than 100 dB (AUDIO OUT connector)
Less than 0.008% THD (AUDIO OUT connector)
More than 95 dB (AUDIO OUT connector)
20 kHz
Inputs
ANTENNA IN
VIDEO IN
AUDIO IN
(AV1,2)
(AV1,2)
S-VIDEO IN
OPTICAL IN
DV IN
Antenna
75 ohms
ohms, sync negative, RCA jack x 2/SCART x 2
dBm more than 47 kohms, RCA jack (L, R) x 2/SCART x
1.0
-6
input,
Vp-p
75
(Y) 1.0 V (p-p), 75 Ω, negative sync,
(C) 0.286 V (p-p) 75 Ω
Optical connector x 1
4 pin (i.LINK/IEEE 1394 standard)
Mini DIN
4-pin
x
2
1
Outputs
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
Audio output (analog audio)
Vp-p 75 Ω, sync negative, RCA jack x 1/SCART x 2
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
1.1 Vrms (1 kHz, -6 dB), 600 Ω, RCA jack (L, R) x 2
1
63
Specifications (Continued)
Amplifier
Stereo mode
100W
Surround mode
Front: 100W
may be
Tu ner
no
+
(6Ω
at 1
100W
kHz, THD
(THD
10
10
%)
%)
Center*: 100W
the sound mode
(* Depending
settings and the
on
100W
+
Surround*: 100W
source, there
sound output.)
+
Subwoofer*: 200W
100W
(4Ω
(6Ω
at 30
at 1
kHz, THD
Hz, THD
10
10
%)
%)
Specifications
87.5
Tuning Range (FM)
Intermediate Frequency (FM)
Signal-to-noise ratio
Tuning Range (AM)
Intermediate Frequency (AM)
108 MHz
-
10.7 MHz
60 dB
522
(Mono)
1,611 kHz
-
450 kHz
Antenna
Wire antenna
(FM)
Loop antenna (AM)
Speakers
Front
Passive Subwoofer
(LHS-75TAS)
Type:
Impedance:
Frequency Response:
Sound Pressure Level:
Center
2
Speaker
-
150
-
20,000 Hz
86 dB/W
(1m)
100W
200W
270
x
1190
2.9
kg
x
270
mm
(LHS-75TAC)
Type:
Impedance:
Frequency Response:
Sound Pressure Level:
Input Power:
Max Input Power:
Dimensions(WxHxD):
Net Weight:
1
Way
2
Speaker
6 Ω
150
-
20,000 Hz
86 dB/W
Rated
Net
Way
6 Ω
Rated
Net
Input Power:
Max Input Power:
Dimensions(WxHxD):
Net Weight:
1
(LHS-75TAW)
1 Way 1 Speaker
Type:
4 Ω
Impedance:
40
1,500 Hz
Frequency Response:
Sound Pressure Level:
82 dB/W (1m)
Rated Input Power:
200W
Max Input Power:
400W
Net Dimensions (W x H x D):
300 x 440 x410 mm
Net Weight:
8.5 kg
(1m)
100W
200W
500
x
1.2
kg
83
x
105
mm
Accessories:
SCART cable
1, RF 75-ohm Coaxial Cable x 1, Speaker cable x 6, FM Antenna cable
AM Antenna cable x 1, Remote control x 1, Batteries (AAA) x 2, Ferrite core x 2
Design
64
x
and
specifications
are
subject
to
change
without notice.
x
1,
Download PDF