LG | LH-W250SC | LG LH-W250SC Owner’s Manual

ABANS_LH-W250SC_JA3GLLD_ENG_88N
WIRELESS DVD RECEIVER
SYSTEM
OWNER'S MANUAL
MODEL: LH-W250SC
LH-W250, LHS-25SCS, LHS-25SCW
ACC25T, ACC25R
R
Before
connecting up, operating or repairing
product, please read this instruction booklet
carefully and completely.
this
Precautions
Safety
About the
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
for instructions
Indicates hazards
itself
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
symbols
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
or
other
likely to cause
material damage.
Indicates
special operating
Indicates
tips
and hints for
harm to the unit
features of this unit.
making
the task easier.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
Manufactured under license from
with arrowhead
symbol
is intended to alert the
within
an
user
about the presence of uninsulated dangerous
voltage within the product's enclosure that may be
of sufficient
to constitute
magnitude
a
risk of electric
shock to persons.
The exclamation mark within
is intended to alert the
important operating
an
about the presence of
and maintenance (servicing)
accompanying
the
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
such
as a
book
case or
equipment
in
confined space
a
similar unit.
CAUTION:
This DVD/CD receiver
employs
a
laser
employs
a
Laser
system.
To
ensure
proper
use
of this
System.
product, please
read this
tion
carefully and retain it for future reference. Should the
require maintenance, contact an authorized service loca(see service procedure).
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous radiation exposure.
To
prevent direct exposure
to laser
beam, do
not
try
to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
vases, should be
CAUTION: This
indoor
2
use
only.
placed
product
on
the
apparatus.
may not be used
law to copy, broadcast, show, broadcast
in public, or rent copyrighted material without
by
play
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
owner 's
manual
unit
It is forbidden
SERIAL NUMBER: The serial number is located on the back
of this unit. This number is unique to this unit and not available
to others. You should record requested information here and
retain this guide as a permanent record of your purchase.
CAUTION:
This DVD/CD receiver
OTES ON COPYRIGHTS:
via cable,
product.
WARNING: Do not install this
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and
other worldwide patents issued and pending. "DTS" and "DTS
Digital Surround" are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2000 Digital Theater Systems,
Inc. All rights reserved.
equilateral triangle
user
instructions in the instructions
Dolby Laboratories. "Dolby",
"Pro Logic", and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved.
outdoor, restricted
to
Model No.
Serial No.
___________________________________
___________________________________
Table of Contents
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
AudioCDandMP3/WMADisc...............22
Playing
an
Audio CD and MP3/WMA Disc
.
.
.
.
.
22
BeforeUse..............................4-5
Pause.............................22
PlayableDiscs...........................4
Precautions.............................5
MovingtoanotherTrack...............22
RepeatTrack/All/Off...................22
NotesonDiscs..........................5
Search.............................22
AboutSymbols..........................5
FrontPanelandRearPanel..................6
JPEGDiscOperation......................23
ViewingaJPEGdisc.....................23
RemoteControlOverview....................7
SlideShow.........................23
StillPicture.........................23
Preparation
Connections............................8-12
TVConnections.........................8
ExternalEquipmentConnections
SpeakerSystemConnection.
.
.
.
.
.
.
.
.
.
.
.
.
.
.8
.
.
.
.
.
.
.
.
.
.
.9-10
.
WirelessTX..........................9
WirelessRX..........................9
Changing
a
Movingtoanotherfile.................23
Torotatepicture......................23
ProgrammedPlayback.....................24
RepeatProgrammedTracks................24
.24
ErasingatrackfromProgrammeList
24
Erasing the Complete Programme List
DivXDiscOperation.......................25
channel of Wireless TX and
WirelessRX..........................9
9
Setting a ID of Wireless TX and Wireless RX
SpeakerConnections..................10
.
.
.
.
.
.
.
.
.
.
.
.
.
.
AdditionalInformation.....................26
LastConditionMemory...................26
ScreenSaver...........................26
.
AerialConnections.......................11
SpeakerPositioning......................12
BeforeOperation.......................13-18
Mini Glossary for Audio Stream & Surround
Mode.................................13
SoundMode...........................13
On-ScreenDisplay.......................14
InitialSettings........................15-18
GeneralOperation....................15
Language..........................15
Display............................15
Audio..............................16
Lock(ParentalControl)................17
Others.............................18
Operation
SystemSelect..........................26
ControllingtheTV.......................26
OperationwithRadio......................27
Presettingtheradiostations................27
Listeningtotheradio.....................27
OtherFunctions...........................28
SleepTimerSetting......................28
Dimmer...............................28
Mute.................................28
XTS(ExcellentTrueSound)................28
XTSpro...............................28
Reference
LanguageCodeList.......................29
CountryCodeList.........................29
Troubleshooting........................30-31
Specification
DVDorVideoCDOperation...............19-21
PlayingaDVDandVideoCD...............19
GeneralFeatures.....................19-21
MovingtoanotherTITLE...............19
19
Moving to another CHAPTER/TRACK
.
.
.
.
.
SlowMotion.........................19
Still Picture and
Frame-by-Frame Playback
.
20
Search.............................20
Repeat............................20
RepeatA-B.........................20
TimeSearch........................20
MarkerSearch.......................21
Zoom..............................21
SpecialDVDFeatures....................21
TitleMenu..........................21
DiscMenu..........................21
ChangingtheAudioLanguage.
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.21
.21
Subtitles...........................21
3
Introducin
Before Use
Playable
Discs
ote
When
(8cm/12cmdisc)
Video CD
(VCD)
(8cm/12cmdisc)
SVCD and CD-R
or
MP3, WMA, JPEG
DVD-RW, DVD+RW,
CD-RW that contains audio titles,
or
play
DTS-encoded
gradually, and keep the volume level low. To
enjoy DTS Digital SurroundTM playback, an external 5.1
channel DTS Digital SurroundTM decoder system must
be connected to the digital output of the unit.
(8cm/12cmdisc)
can
playing
volume
Audio CD
addition, this unit
DTS-encoded CDs
CDs, excessive audio level
may be heard from the analog stereo output. To avoid
possible damage to the audio system, turn down the
volume before playing back such discs, adjust the
DVD
In
on
a
DivX files.
Disc-related terms
Title
(DVD only)
The main film content
Depending
on
the conditions of the
the CD-R/RW
ment
or
itself,
some
cannot be
CD-R/RW
played
on
recording equip(or DVD-RW, DVD+RW) disc
(or DVD-RW, DVD+RW) discs
the unit.
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
Do not
irregularly shaped
octagonal). It may result in
otes
use
on
CDs
(the
(e.g., heart-shaped
malfunctions.
feature content
additional feature content, or music album.
Each title is assigned a title reference number
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
other functions may be added.
Make sure to also refer to the instructions
or
supplied
played
on
enabling
easily.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
On
(VCD)
video CD with PBC
(Playback control) functions,
moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
you to locate the scene you want.
A scene is composed of one or several tracks.
with
the DVDs and Video CDs. Some DVDs made for busi-
purposes may not be able to be
you to locate it
Scene
DVDs and Video CDs
Some
ness
accompanying
or
otes
or
or
the
of video CDs
Types
There
are
two
unit.
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
Regional
code of the DVD/CD receiver and DVDs
This DVD/CD Receiver is
designed
and manufactured for
playback of region "5" encoded DVD software. The
region code on the labels of some DVDs indicates which
type of player can play those discs. This unit
can only play DVDs labeled "5" or "ALL". If you
5
try to play any other discs, the message "Check
Regional Code" will appear on the TV screen.
Some DVDs that have no region code label may still be
subject to area restrictions and therefore not playable.
4
PBC
with the
functions, or other
typical computer-like operations. Moreover, still pictures
of
high
system via
resolution
menus, search
can
be
played
if
they
are
included in
the disc.
Video CDs not
equipped
with PBC
(Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Before Use
(Continued)
After
the unit
Handling
When
shipping the unit
The original shipping carton and packing materials may
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be disturbed during playback. In this case, position
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
radio,
or
or
turn off the
use
volatile
such
liquids,
contact with the unit for
leave marks
Cleaning
a
use a
store the disc in its
case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sunthere may be a considerable
increase inside the car.
light,
Cleaning
discs
Fingerprints
or
and dust
the disc
on
reduce sound
with
temperature
as
a
clean
quality.
cloth. Wipe
Before
distort the
can
picture
clean the disc
playing,
the disc from the centre out-
wards.
on
insecticide spray,
as
plastic products in
long period of time. They will
a
or
the surface.
the unit
Do not
To clean the cabinet
Use
playing,
the exterior surfaces clean
the unit. Do not leave rubber
near
discs
Storing
Precautions
soft, dry cloth. If the surfaces
soft cloth
benzene,
or
moistened with
lightly
solution. Do not
use
thinner,
are
a
extremely dirty,
mild detergent
strong solvents such
as
these
as
might damage
alcohol,
the surface
strong solvents such as alcohol, benzene,
thinner, commercially available cleaners, or anti-static
use
spray intended for
About
vinyl
records.
Symbols
of the unit.
About the
To obtain
clear
a
picture
The DVD/CD Receiver is
a
high-tech, precision
device.
If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
""
may appear on the TV screen during operation.
This icon means the function explained in this owner's
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Disc
Handling
get
on
playback
by the edges
VCD1.1
side of the disc.
so
that
fingerprints
symbols
DVD video disc.
for instructions
following symbol is
represented by the symbol.
one
to the disc
specific
of the
DVD and finalized DVD±R/RW.
Video CDs with the PBC
(playback control)
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
the surface.
Do not stick paper
that
function.
Do not touch the
Hold the disc
on
A section whose title has
applicable only
Notes
symbol display
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG disc.
DivX
DivX disc.
5
Introducin
Front Panel and Rear Panel
STANDBY/ON
DISC
STANDBY indicator
Tray
Lights red when the receiver
is in Standby mode (off).
PLAY
Press and hold down this button about 3
seconds, then press repeatedly
to select
other function.
TUNING(-/+)/
SKIP(-/+)
OPEN/CLOSE button
DISPLAY Window
MONO/STEREO/
VOLUME
PAUSE/STEP
controller
STOP
POWER CORD
SPEAKER Connectors
FM Antenna Connector
MONITOR OUT Connector
AUX IN
MONITOR
OUT
DC 7V OUT
AUXILIARY INPUT Connectors
AM
Loop
Antenna Connectors
Wireless TX
Do not touch the inner
panel. Electrostatic
damage to the unit.
6
(DC
7V
OUT)
connector
pins of the jacks on the rear
discharge may cause permanent
Remote Control Overview
POWER
Switches
System ON
OPEN/CLOSE
and OFF.
Opens
DVD
Select the
output
source
(CD/DVD)
Selects
DVD
or
System's
(FM
directly
or
options
in
MUTE
at
Selects
AUDIO
SOUND
MRAKER
-
SEARCH
Removes the
PRESET/
Marks
CH
an
audio
an
language (DVD).
setup
menu.
point during playback.
a
SEARCH
AUDIO
Selects
subtitle
a
MARKER
sound effect.
enjoy great
speakers.
RETURN
XTS
To
a
automatically.
SUBTITLE
SUBTITLE
sound.
off
Mute the
a
natural and realistic
more
System to turn
specified time.
only)
MUTE
XTS pro
enjoy
TV
Set the
menu.
To
(LG
SLEEP
and AM
service, programme number
select numbered
source.
SLEEP
0-9 numerical buttons
a
input
To control the TV.
bands)
Select
tray.
TV
BAND
tuner
and closes the disc
AUX
accesses
Select the
(Z)
language (DVD)
audio channel (CD).
Displays
+
or
MARKER SEARCH
menu.
DISPLAY
..
Accesses On-Screen
SOUND MODE
display.
INPUT
Selects sound mode.
Selects the TV's
SETUP
source.
-
Accesses
or removes
setup
menu
b/B/v/V
.
Selects
MENU
Accesses
DVD disc.
menu on a
REVERSE
Displays the disc's Title
VOLUME
SKIP(>)
Program
To
Starts
a
radio stations
frequency
(+/-)
(B)
playback.
PAUSE/STEP
menu.
menu, if available.
adjust speaker volume and TV volume.
PLAY
MEMO.
Enter
Radio.
TITLE
forward*/go to next
chapter or track.
or removes
or
SKIP
PROG.
Accesses
selection.
To tune in the desired radio station.
backward*/go to beginning of
current chapter or track or go to
previous chapter or track.
Search
menu
TUN(-/+) (b/B):
Search
FORWARD
menu.
Select programme of TV
playback.
SKIP(.)
in the
PRESET/CH(+/-) (v/V):
forward.
SLOW-/+(t/T)
Reverse/ Forward slow
option
Acknowledges
SCAN-/+(bb/BB)
or
an
ENTER
SCAN
Search backward
(left/right/up/down)
Pause
playback
STOP
(x)
(X)
Stops playback.
into
the tuner.
CLEAR
Removes
track number
on
the
program menu or a mark
MARKER SEARCH
on
the
a
menu.
REPEAT
Repeat chapter, track, title,
all.
REPEAT A-B
Repeats
sequence.
ZOOM
Enlarges
DVD video
image.
DIMMER
Press to
change brightness of
thedisplay window on the front panel
during in power-on status.
Remote Control
Remote control
Operation Range
Point the remote control at the remote sensor and press the
buttons.
Distance: About 23 ft (7 m) from the front of the remote sensor
Angle:
About 30° in each direction in front of the remote
sensor
Remove the
remote
battery
battery
cover on
control, and insert
AAA) batteries
correctly.
with
installation
the
rear
two R03
and
of the
(size
aligned
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
Introducin
Connections
TV Connections
Make
the
of the
following connections, depending
capabilities of your existing equipment.
one
on
Rear of TV
VIDEO
INPUT
AUDIO INPUT
SCART INPUT
R
L
L
ip
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
V
best connections.
Rear of DVD/CD receiver
Caution
Make
the DVD/CD Receiver is connected
sure
to the TV. Select the correct AV
directly
your TV.
Do not connect your DVD/CD Receiver to TV via your
VCR. The DVD image could be distorted by the copy
input
on
protection system.
AUX IN
MO
OR
O
DC7VOU
VIDEO Cable
T
Video connection
Rear of DVD/CD receiver
Connect the MONITOR OUT
from the DVD/CD
Receiver to the VIDEO IN
the TV
video cable
jack
jack on
using
SCART-RCA
Adaptor
the
supplied (V).
TV/MONITOR
Tip:
(SCART type)
If you want to connect the DVD/CD receiver to a TV
with SCART socket, use the SCART-RCA adapter (T).
External
Equipment Connections
Connection
Rear of VCR
Connect the AUX IN
(L/R) jacks on the DVD/CD
receiver to the AUDIO OUT (L/R) jacks on the VCR,
LD player, etc using the audio cables.
(or
LD
AUDIO OUTPUT
L
player, etc)
VIDEO
OUTPUT
R
Tip:
Press AUX
these
on
the remote control to select
input
to
jacks.
AV 1 appears
on
the
Display
Window.
AUX IN
MONITOR
OUT
DC 7V
8
Connections
(Continued)
Speaker System Connection
Changing
ote
If there is
a
nearby, an
(Ex : Micro
strong electromagnetic
wave
TX and Wireless RX
product
interference may be occured.
wave
channel of Wireless
a
If there is
oven)
a
similar wireless
product nearby, interference
change to other channel using
may occur. In this case,
ID/CHNNEL (ID./CH.) button of Wireless TX.
Wireless TX
Press the ID/CHNNEL
the
button for less than
about 3 seconds.
LED indicator
Displays
(ID./CH.)
operated
status.
ote
The Wireless RX may not receiced the changed channel of
Wireless TX. In this case press the ID button (or ID./CH button)
of Wireless RX for less than about 3 seconds.
The Wireless RX searches the
-
LED indicator of Wireless TX
*
LED indicator
-
connectors with the sound
signal
Setting
a
ID of Wireless TX and
Wireless RX
cable and is
connected the DC IN connector at the Wireless TX
When the unit is
and the Wireless TX
If
(DC
7V
OUT)
connector at the
LED indicator
-
"OFF
an
RX,
main set with the DC power cable.
*
channel.
"BLUE"
The main set is turned on, the Wireless TX is connected the SOUND SIGNAL connector and rear (right, left)
speaker
changed
(No display)"
manufactured, ID
interference is occured
set the
new
or
are
already
use a new
you
set.
Wireless
ID.
1. Set the distance between the Wireless TX and the
The main set is turned off.
Wireless RX within 50cm.
DC IN connector
ID/CHNNEL
2. Turn the Wireless TX and Wireless RX
(ID./CH.)
button
3. Press the ID/CHNNEL
(ID./CH.)
on.
button of Wireless
TX and ID button of Wireless RX at the
for
more
same
time
than about 3 seconds.
SOUND SIGNAL
SIGNAL
ID./CH.
connector
DC IN
otes
If there is
Wireless RX
a
strong electromagnetic
wave
interference may be occured.
Do not operate a portable transmitter
network
device)
near
this
product nearby,
(such
as a
wireless
product.
LED indicator
Displays
the
operated
status.
LED indicator of Wireless RX
*
LED indicator
-
"BLUE"
The Wireless TX is
*
LED indicator
-
receiving
a
signal
standby
mode.
of Wireless TX.
"RED"
The Wireless RX is in
ID. button
(or
ID./CH.
button)
STANDBY/ON button
you press this button, Power
is off and If you press this
button once more, it is in
(If
standby mode.)
Wireless
speaker
connector
Power cord
9
an
Prepa tion
Connections
(Continued)
Speaker System Connection (continued)
Speaker
Connections
Connect the
to the front
speakers
(right, left)
or
center
connectors at the main set.
speaker
Connect the subwoofer to the woofer connector.
Connect the power cord of the Wireless RX to the
(right, left) with the speaker cable.
outlet, then
connect the Wireless RX and the wireless
Connect the DC IN connector of the Wireless TX and the Wireless TX
with the DC power cable.
Connect the SOUND SIGNAL connector of the Wireless TX and
main set with the sound
signal
rear
(DC
7V
OUT)
speaker
connector at the main set
(right, left) speaker
of connectors of the
cable.
Set the distance between this unit and Wireless RX within 10m.
Center
Front
speaker
(Right)
Front
speaker
(Left)
Wireless TX
speaker
Red
SIGNAL
ID./CH.
DC IN
Black
Sound
signal
cable
AUX IN
MONITOR
OUT
DC 7V OUT
Subwoofer
DC power cable
Wireless RX
Wireless
speaker
(Right)
Wireless
speaker
(Left)
otes
Optimum performance
can
be
implemented only
when the Wireless TX and the Wireless RX within distance of 2m
is used since communication failure may occur if closely approaching distance between them.
Be sure to match the speaker cable to the appropriate terminal on the components: + to + and
--
to
--.
If the cables
through
are
reversed, the sound will be distorted and will lack base.
Do not
the front
of
supplied speaker.
It takes about a few seconds (and may take longer) for the Wireless TX and Wireless
When the unit is turned off, the Wireless RX is in standby mode (off) automatically
If the Wireless RX is turned off, the wireless speaker will not function.
10
remove
cover
RX to communicate with each other.
after about 10 seconds.
10m
Connections
(Continued)
Aerial Connections
Connect the
Connect
supplied FM/AM aerial for listening to the radio.
the AM Loop aerial to the AM aerial connector.
Connect the FM Wire aerial to the FM aerial connector.
AM
FM Wire aerial
Loop aerial (supplied)
Prepa tion
(supplied)
AUX IN
MONITOR
OUT
DC 7V OUT
otes
To
prevent noise pickup, keep the AM Loop aerial away from the DVD/CD Receiver and other components.
Be
sure
After
fully extend the FM wire aerial.
connecting the FM Wire aerial, keep
to
it
as
horizontal
as
possible.
11
Connections
(Continued)
Speaker Positioning
In the
of normal
case
position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers and subto play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should
If you want
connect a subwoofer.
woofer).
?
?
Front
speakers
According to your listening position
speakers to 45 degree.
for
speakers
equal
distance. And
by hearing position
set up the interval between
Centre
The
?
set up the
speaker
centre speakers
and front
speakers
are
ideally
the
same
height.
But
normally place
it above
or
below the television.
Rear
speakers
Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround
sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or
above the level of the listener 's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse
the sound.
In the
rear
?
case
of
speakers
a
smaller
above 60
room
-
90
size, if the audience is
cm
than the listener 's
near
to the
rear
wall set the
rear
speakers opposite
each
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Rear
Speaker
Front
Speaker
(Left)
Speaker
(Right)
Speaker
(Left)
Rear
Speaker
(Right)
Speaker Positioning Example
12
other, and
set the
Before
Mini
Operation
Glossary
for Audio Stream &
Surround mode
Sound Mode
You
DVD
VCD2.0
VCD1.1
CD
enjoy surround sound simply by selecting one
pre-programmed sound fields according to the
can
of the
program you want to listen to.
Allows you to enjoy 5.1(or 6) discrete channels of high quality
digital audio from DTS program sources such as discs, DVD
and
compact discs, etc.bearing the trademark. DTS Digital
Surround delivers up to 6 channels of transparent audio(which
identical to the
original masters) and results in exceptional clarity throughout a true 360 degree sound field. The
term DTS is a trademark of DTS Technology, LLC.
Manufactured under license from DTS Technology, LLC.
means
When DVD is inserted
You
change
can
the
Digital
After you select 2 channel
a)
AUDIO
) by pressing
button repeatedly.
The
Bypass
) by pressing
II creates five full-bandwidth
sources.
output channels
This is done using an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds
or
"
-"
-
from two-channel
2 ENG
D
2CH
or
button, press SOUND
Music
Matrix
tonal colorations.
MOVIE mode:
The Movie mode is for use with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
(For example
1 ENG
D
5.1 CH
or
4 ENG
(II)
Logic
(For example
Movie
After you select 5.1 channel
b)
DTS
Pro
by
"
5.1 CH
Dolby
mode
this feature is used.
D
2CH
"
Output
pressing the AUDIO button on the remote control during
playback. Although the DVD contents differ from disc to
disc, the following explains the basic operation when
3 ENG
Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital promark, you can
gram source. If you play DVDs with
enjoy even better sound quality, greater spatial accuracy, and
improved dynamic range.
Audio
AUDIO
indicator will be
"BYPASS" indicator
button, press SOUND button.
displayed on the TV screen.
will be only displayed on the display
window.
When Video CD is inserted
Each time you press SOUND button, the sound mode
of Video CD is changed on the display window in the
following order.
BYPASS
STUDIO
CLUB
HALL
THEATER 1
CHURCH
PL ll MOVIE
PL ll MUSIC
PL ll MTRX
BYPASS...
→
→
→
→
→
→
→
→
→
MUSIC mode:
The Music mode is for
use
with any stereo music
recordings.
MATRIX mode:
The Matrix mode is the same as the Music mode except that the
directional enhancement logic is turned off. It may be used to
enhance mono signals by making them seem "larger." The
Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate
"cure" for poor FM stereo reception may be simply to force the
audio to mono.
ote
After you select the "Bypass" of sound mode by
pressing SOUND button, press AUDIO button.
The
Left, Right and Stereo of audio channel will be
displayed
the TV
Each time you press SOUND button, the sound mode
of Audio CD is changed on the display window in the
order.
BYPASS
STUDIO
CLUB
HALL
THEATER 1
CHURCH
PL ll MOVIE
PL ll MUSIC
PL ll MTRX
BYPASS...
→
Software with multichannel surround audio
according
to the way it
was
recorded.
signals
is
played
screen.
When CD is inserted
following
BYPASS
on
→
→
→
→
→
→
→
→
For your reference
?
You
identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled with
the
logo.
DTS Digital Surround discs are marked with DTS.
can
-
-
-
otes
When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling
frequency).
When you use a microphone except Karaoke function, you
can't enjoy 5.1 channel output. Only 2 channel sound will
out
by
the influence of the
microphone system.
13
Prepa tion
Before
Operation (Continued)
On-Screen
You
Display
general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
display
can
the
Example: On-Screen Display during
playing DVD Video
Selection Method
Items
Title Number
1/3
b /
B, Numbers
ENTER
Press DISPLAY
during playback.
1
2Pressv/Vtoselectanitem.
highlighted.
Chapter
Number
1/12
0:20:09
Numbers, ENTER
Audio
Press b / B to
3
change
the
the number buttons if
use
inputting
the title
You
setting.
appropriate (e.g.
number).
For
press ENTER to execute the
some
can
also
A-B
Repeat
title
Repeat
sequence
Resume
Action
play
setting.
language
Angle
prohibited
or
AUDIO
point
ABC
1 ENG
SUBTITLE
otes
If
no
Selection Method
Track Number
button is
screen
all of the features
pressed for 10 seconds,
display disappears.
the
on-
(or
PBC
1/3
Time search
Sound
b /
B, Numbers
ENTER
mode)
Numbers
0:20:09
ENTER
b/Bor
Audio Channel
14
b/B
Example: On-Screen Display during
playing VCD
not available
provide
b/B
Bypass
Items
Some discs may not
shown below.
b/Bor
1/3
Sound
from this
b/Bor
functions,
PLAYBACK STATUS/RESTRICTIONS
Title
language
and Digital Audio
Output mode
Subtitle
B, Numbers
ENTER
Time search
The selected item is
b /
AUDIO
Bypass
b/B
Before
Initial
Operation (Continued)
LANGUAGE
Settings
the
menu, you can make various adjustments to items such as picture and sound. You can also
By using
Setup
LANGUAGE
language for the subtitles and the Setup menu,
among other things. For details on each Setup menu
set
a
item,
To
see
display
the
menu.
SET UP will take you back to initial
To go to the next level:
on
General
Select
screen
Original
audio),
option
Prepa tion
as
disc
to the second level.
well
as
alternate
setting for
setting(s).
Use v / V to select the second desired
then press B to
move
the
option
to the third level.
for the
Setup
menu
and
on-screen
display.
DVD
you prefer for the audio track
subtitles, and the disc menu.
was
Refers to the
original language
(disc
in which the
recorded.
Other: To select another language, press number
buttons to enter the
corresponding 4-digit number
according to the language code list on page 29. If you
enter the wrong language code, press CLEAR on the
remote control.
Use v / V to select the desired
setting
then press
ENTER to confirm your selection.
Some items require additional steps.
or
Select
language
Original:
then
will be shown the current
Press SET UP
language
Disc Audio / Subtitle / Menu
appears.
move
item,
a
Select the
menu
B to
selected
5
Disc Menu
OSD
Operation
setup
2 press
4
Off
Move
the remote control.
Use v / V to select the desired
3
Disc Subtitle
screen.
Press SET UP.
The
Original
A second press of
To go back to the previous level:
Press b on the remote control.
The
Disc Audio
and exit the Menu:
Press SET UP to
1
English
pages 15 to 18.
display
Press B
OSD
PLAY to exit the
DISPLAY
setup
DISPLAY
menu.
TV
16:9
Aspect
Display
Mode
Widescreen
Move
TV
Aspect
DVD
4:3: Select when
a
16:9: Select when
Mode
Display
Display
Mode
Select
standard 4:3 TV is connected.
a
16:9 wide TV is connected.
DVD
setting
works
only
when the TV
Aspect
mode is set to "4:3".
upper and
Displays a wide picture with
lower portions of the screen.
Panscan:
Automatically displays
the wide
picture
and cuts off the
portions
that do not fit.
Letterbox:
the entire
screen
bands
on
the
on
15
Before
Operation (Continued)
AUDIO
Distance
Each DVD disc has
If you connected speakers to your DVD/CD Receiver,
setting the Distance lets the speakers know how far the
a
variety
of audio
Set the DVD/CD Receiver's AUDIO
the
type of audio system you
output options.
options according
to
use.
listener at the
AUDIO
5.1
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
Press b / B to
Select
Speaker Setup
DRC
On
Vocal
On
time.
same
adjust
the Distance of the selected
speaker.
ote
You
Rear
Move
5.1
and
Select
Test
DVD
Speaker Setup
adjust the Distance of Center speaker
speakers (Left & Right) only.
can
Press b / B to test the
Select
speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output.
Adjust
of each
signals
the volume to match the
memorized in the
Front Left
system.
(L)
Right (R)
Rear
speaker.
volume of test signals
→
Center
→
→
Front
Rear Left
(L)
Right (R)
→
→
SubWoofer
AUDIO
Dynamic Range Control (DRC)
Speaker
Size
DVD
Front L
DivX
Small
With the DVD
Volume
0
dB
Distance
2
m
Test
program's soundtrack in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing dialog intelligibility.
Off
Select
Move
Return
Enter
Speaker
Select
format, you
a
a
otes
The DRC function works
ote
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
speaker settings
settings.
are
fixed, you
cannot
change
Volume
Press b / B to
adjust the output
speaker. (-5dB +5dB)
~
level of the selected
Dynamic Range Compression
on
may differ
the DVD disc.
Set Vocal to On
only
DVD is
The karaoke channels
mix into
of
DVD
Vocal
Size
Since the
depending
only during playback
recorded discs.
Dolby Digital
The level of
16
hear
Set DRC to On for this effect.
speaker that you want to adjust. (Front speakers (Left), Front speakers (Right), Center Speaker,
SubWoofer, Rear speakers (Left), or Rear speakers
(Right))
the
can
playing.
a
when
a
multi-channel Karaoke
normal stereo sound.
on
the disc will
Before
LOCK
Operation (Continued)
Password
(Parental Control)
You
LOCK
Unlock
Rating
****
Password
Country
can
control information
certain
scenes on
2
Follow
to
that may not be suitable
of these discs contain parental
scenes
Many
that applies
to the
complete
the disc. Movies and
disc
scenes are
or
rated
your children from being able to view material you
believe is unsuitable.
1
2
"Rating"
on
3
then press ENTER.
4
Press SET UP to exit the
step
2
as
the LOCK
Rating,
then press
menu
Password and
Code features, you must input the
security code you created.
yet
entered
a
security
Country
4-digit
code you
are
so.
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
3Selectaratingfrom1to8usingthev/V
buttons.
Rating 1-8: Rating
and rating eight (8)
or
one
(1)
menu.
forget your Security
has the most restrictions
is the least restrictive.
Code
If you forget your security code you
the following steps:
1
Input
the
6-digit number
security code is
and the
2
Enter
a new
code
can
"210499"
on
clear it
the
using
setup
menu
cleared.
described above.
as
ote
When
"
"
appears on the TV screen,
and then press SET UP to move to the
INPUT PASSWD
press STOP
(x)
menu.
Country
DVD
Code
Enter the code of the
If you have not
prompted to do
then press B.
highlighted.
Enter the new 4-digit code,
Input it again to verify.
setup
B.
To access the
menu
(Rating). "Change"
to
control feature allows you to block access
below the rating you input, thereby preventing
Select
the LOCK
Select
parental
scenes
on
shown left
from 1 to 8, depending on the country. Some discs offer
more suitable scenes as an alternative.
The
change password.
"New" is
DVD
for children to view.
or
Select Password
If you
Some movies contain
enter
1
Code
Move
Rating
(Security Code)
were
used to rate the DVD video
in the reference
1
country/area
Select
whose standards
disc, based
on
the list
chapter.
"Country
Code"
on
the LOCK
menu
then
press B.
Follow
2
Select
3
Shift
4
step 2
as
shown left
the first character
using
v / V buttons.
using B button and select
character using v / V buttons.
the
second
(Rating).
cursor
the
Unlock
If you select
and the disc
unlock, parental control is
plays
not active
5
in full.
Press ENTER to confirm your country code
selection.
ote
If you set a rating for the DVD/CD Receiver, all disc
scenes with the same rating or lower are played. Higher
rated
scenes are
is available
on
not
played
unless
an
alternate
scene
the disc. The alternative must have the
rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc.
same
Press ENTER to confirm your
4 then press SET
UP to exit the
rating selection,
menu.
17
Prepa tion
Before
Operation (Continued)
OTHERS
?
Display
the number which you
can
OTHERS
PBC
?
On
This rental video has 7 views left. A view
ends when you
Select
DivX(R) Registration
video,
or
stop playback, play
turn off your
Do you want to
use one
of your 7 views
Set
No
expired.
This rental is
VCD
Playback
Control
(PBC)
to On
or
played according
are
expired.
Off.
?
On:Video CDs with PBC
now
Select
Move
PBC
The rental has been
different
player.
Yes
?
a
to the
Display
the authorization
error.
PBC.
Off:Video CDs with PBC
played
are
the
same
way
as
Audio CDs.
DivX(R) Registration
You
can
DivX
show the DivX DRM
Management) Registration
Your
Please
the
registration
use
DivX(R)
(Digital Right
code for your unit
code is
this code to
the
To learn
XXXXXXXX
register this player with
Video On Demand service.
This will allow you to rent and
using
:
only.
DivX(R)
more
purchase
videos
Video On Demand format.
go to www.divx.com/vod
The
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental
an
encrypt movie file.
ote
If you rent the DivX VOD file, it has several
viewing limits as show below.
18
options
of
This video
player
play
is not authorized to
this video.
watch the file.
DVD
Video CD
or
Playing
a
on
General Features
DVD and Video CD
Playback Setup
Turn
Operation
DVD
VCD2.0
VCD1.1
the TV and select the video
input
ote
source con-
system: Turn
and select the
on
input
the audio
source
system
1
Moving
(Z)
to open the disc
When
tray.
2 facing
up.
When a double-sided DVD is inserted, make
the side you want to play is facing down.
3
READING appears
starts
(Z)
to close the
menu
might
The
a menu screen
is
tray.
appear
displayed
may be displayed first after
Video CD which contains a menu.
menu screen
DVD
or
loading
a
title, you
can move
to
follows:
button
(0-9)
to select
a
title number.
When
to another CHAPTER/TRACK
VCD2.0
a
title
disc has
DivX
on a
more
disc has
than
chapter/track
as
Press .
or
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
>
briefly during playback to select
the next chapter/track or to return to the beginning of
the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
press DISP. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
DVD
number
Use the bBvVbuttons to select the
using
title/chapter
you
want to view, then press ENTER to start. Press TITLE
or DVD MENU to return to the menu screen.
the numbered buttons
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
setting
the
For
Slow Motion
operating procedures
depending on the disc.
using
may differ
Follow the instructions on the each
menu screen.
You also may set PBC to Off under
setup.
for
1
the
4-digit
code must
will enter SLOW mode.
3
t
To exit slow motion
Slow motion
discs that have
code different from your receiver. The
this player is 5 (five).
player
pause.
or
t 1/2
or
T 1/2
required speed: t
(backward), or T
(forward).
mode, press PLAY.
ote
page 17).
region code.
play
VCD1.1
(see
on
DVDs may have a
Your receiver will not
The
during
1/8, t 1/4
1/16, T 1/8, T 1/4
be entered and/or the disc must be authorized
Control",
Press SLOW -/+
2 1/16,
If Parental Control is set and the disc is not within the
"Parental
VCD2.0
DVD
Use the SLOW -/+ to select the
otes
Rating settings (not authorized),
the numbered buttons
menu screen.
and the exact
menu
(0-9).
ote
two-digit numbers, press
(0-9) in rapid succession.
VCD2.0
Menu
one
DISP., then press the appropriate numbered
DVD
instead.
If
as
than
more
Press
Moving
the TV screen, and playback
If playback does not start,
press PLAY.
In some cases, the disc
disc has
a
DVD
sure
on
automatically.
to another TITLE
another title
Load your chosen disc in the tray, with the label
Press OPEN/CLOSE
use
connected to the
DVD/CD Receiver.
Press OPEN/CLOSE
otherwise, all operations described
the remote control. Some features may also be
available on the Setup menu.
nected to the DVD/CD Receiver.
Audio
Unless stated
region
region code
playback
in
reverse
is not
applicable
for
Video CD.
a
for
19
Operation
DVD
Video CD
or
General Features
Still Picture and
VCD2.0
DVD
1
(continued)
Repeat
Frame-by-frame playback
VCD1.1
during playback.
The DVD/CD Receiver will
now
repeat
go into PAUSE
A-B
VCD2.0
DVD
sequence in
a
a
title:
Press A-B at your chosen
A- appears
briefly
Press A-B
again
A-B appears
briefly
begins.
the TV
on
VCD1.1
starting point.
screen.
at your chosen end
the TV screen, and the
on
mode.
sequence
You
To cancel the sequence, press A-B
advance the
can
PAUSE/STEP
Search
Press m
picture frame-by-frame by pressrepeatedly on the remote control.
VCD2.0
DVD
or
M
or
M
go into SEARCH mode.
2 required speed: mX2, mX4,
mX8, mX16,
MX2, MX4, MX8,
(backward) or
MX16, MX100 (forward).
With
Video
To exit SEARCH
Press DISP.
or
CLEAR.
VCD1.2
during playback.
play appears
on
the
playing
The on-screen dis-
elapsed playing
Within 10 seconds, press 3/4 to select the Time
Search icon in the on-screen display.
The "-:--:--" appears in the Time Search box.
3
mode, press PLAY.
Within 10 seconds, use the number buttons to
enter the required start time. Enter hours, min-
utes, and seconds from left to right in the box.
VCD2.0
DVD
Repeat
DVD Video Discs
To
To
the TV
screen.
To
Title icon appears
on
the TV
screen.
REPEAT
Repeat mode, press
Repeat
-
third
a
Off icon appears
Repeat
the TV
on
screen.
Track/All/Off
repeat the track currently playing, press
Repeat
Track icon appears
on
the TV
screen.
repeat the disc currently playing, press
REPEAT
The
a
second time.
Repeat
All icon appears
To exit
on
the TV
screen.
REPEAT
Repeat mode, press
a
third
time.
The
Repeat
Off icon appears
on
the TV
screen.
ote
On
a
the
setup
18.
20
invalid
time, playback
ote
REPEAT.
To
an
the disc. If you
will continue from the current
on
point.
time.
The
3
on
starts from the selected time
Playback
second time.
a
Repeat
Video CDs
2
4
Within 10 seconds, press ENTER to confirm the
start time.
enter
icon appears
num-
repeat the title currently playing, press
To exit
The
1
Repeat Chapter/Title/Off
Repeat Chapter
remove
bers.
DivX
repeat the currently playing chapter, press
REPEAT
The
3
-
VCD1.1
REPEAT.
The
2
time of
the current disc.
If you enter the wrong numbers, press CLEAR to
the numbers you entered. Then enter the correct
1
at
screen.
The Time Search box shows the
2
CD, the Search speed changes:
mX2, mX4, mX8, mX16 (backward) or
MX2, MX4, MX8, MX16 (forward).
a
VCD2.0
repeat
The Time Search function allows you to start
any chosen time on the disc.
1
to select the
repeatedly
mX100
DVD
point.
DivX
during playback.
now
3
Time Search
VCD1.1
The DVD/CD Receiver will
Press m
3
To
1
2
DivX
Press PAUSE/STEP
2 ing
1
Operation (Continued)
Video CD with
menu
to
PBC, you
use
the
must set PBC to Off
Repeat
on
function. See page
On
a
Video CD with
the
setup
menu
to
PBC, you
use
the
must set PBC to Off
Repeat
function.
on
DVD
Video CD
or
General Features
Marker Search
You
can
nine
start
points
To enter
1
a
(continued)
DVD
playback
VCD1.1
from
the contents of DVD Video
discs: Menus
point. Up
to
DVDs may contain menus that allow you to access
special features. To use the disc menu, press MENU.
mark, follow these steps.
disc
During
playback
playback,
Then, press the appropriate number button to select
option. Or, use the 1/2/3/4 buttons to highlight your
selection, then press ENTER.
press MARKER when
reaches the spot that you want to
memorize.
the TV
screen
briefly.
1 to enter up to nine Marker
Repeat step
on a
on
points
disc.
To Recall
During
playback, press
The MARKER SEARCH
menu
will appear
on
the
2
Within 10 seconds, press 1/2 to select
a
screen.
will start from the Marked
a
Otherwise, the disc
The menu can list camera
guage and subtitle
title.
menu
menu
will appear
may appear.
angles, spoken lanoptions, and chapters for the
DVD
scene.
The disc
is
menu
displayed.
the MARKER SEARCH menu, press
the Audio
Changing
DivX
Marked Scene
disc
playback, press
1
2
3
Repeat steps
4
5
The MARKER SEARCH
menu
DVD
Language
Press AUDIO
During
on
Press MENU.
SEARCH.
To clear
menu, the
screen.
Disc Menu
Press ENTER.
remove
a
Marker
number that you want to recall.
To
DVD
If the current title has
the
SEARCH.
an
Press TITLE.
Marked Scene
disc
1
2
3 Playback
4
Title Menu
1
a
DVD
Checking
be memorized.
can
DVD Features
Special
VCD2.0
memorized
a
The Marker icon will appear
2
Operation (Continued)
SEARCH.
will appear
on
different
the
repeatedly during playback
audio language or audio track.
to hear
a
screen.
Press 1/2 to select the Marker number that you
Changing
want to erase.
Press AUDIO
Press CLEAR.
different
the Audio Channel
VCD2.0
VCD1.1
repeatedly during playback to hear a
audio channel (STER., LEFT or RIGHT).
The Marker number will be erased from the list.
ote
2 and 3 to erase additional Marker
If
appears, the feature is not available
on
the disc.
numbers.
To
remove
the MARKER SEARCH menu, press
SEARCH.
Zoom
different
VCD1.1
1
during playback
If you press ZOOM
increases up to four
→
1600% size
2
or
still
playback
Use the 1 2
zoomed
repeatedly,
the
magnification
to
see
the
The subtitle file of the DivX file is
displayed only smi,
srt and sub.
to
If there is
no
information
or
there is
file, "1/1"
etc
a
are
code that
can
displayed.
level
steps.
400% size
→
repeatedly during playback
subtitle languages.
not read in the DivX
activate the Zoom function.
100% size
DivX
otes
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
Press ZOOM
DVD
Press S-TITLE
VCD2.0
DVD
Subtitles
→
800%
→
100% size
3 4
buttons to
move
through
the
picture.
ote
The
zoom
function may not work for
some
DVDs.
21
Operation
Audio CD
Playing
Disc
an
MP3/WMA Disc
or
Audio CD and MP3/WMA
MP3
CD
Operation
Repeat
You
WMA
can
play
recordings
on
MP3/WMA formatted
play
can
CD-ROM, CD-R,
or
CD-RW discs.
2 Press REPEAT to select
?
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
?
ENTER and
playback
a
disc.
disc. The
repeat icon
?
desired
a
repeat mode.
TRACK:
repeats the current track
ALL: repeats all the tracks on a disc.
does not
Off(No display):
play repeatedly.
starts.
1/12
0:00:00
playing
on a
WMA
appears.
Audio CD
or
MP3
CD
title/chapter/all/track
a
1 Press REPEAT when
The DVD/CD Receiver
PLAY
Track/All/Off
Audio CD
List
Program
Track1
Track8
Track2
Track3
Track3
Track12
Track4
Track7
Track5
Track6
Track6
Track9
Track7
Track1
Track8
Track10
Search
CD
1 Press m
or
WMA
Mduring playback.
The receiver will
2 Press m
MP3
now
M
or
go into SEARCH mode.
repeatedly
to select the
speed: mX2, mX4, mX8 (backward)
MX4, MX8 (forward).
3 To exit SEARCH
required
or
MX2,
mode, press PLAY.
MP3 / WMA
1.
Press v / V to select
folder, and press ENTER
to
the folder contents.
see
2.
a
Press v / V to select
ENTER.
a
MP3 / WMA disc
track then press PLAY
or
starts.
Playback
with this
player
48
Sampling frequency:
within 24 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32- 192kbps (WMA)
kHz
(MP3),
The DVD/CD Receiver cannot read
an
limited
?
as
compatibility
is
follows:
within 32
-
-
0:00:00
1/104
?
MP3
List
Program
?
1-Music1
-
MP3/WMA
2-Music2
file that has
3-Music3
file extension other than
a
4-Music4
".mp3"
/
".wma".
5-Music5
6-Music6
7-Music7
?
CD-R
?
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
otes
If you
are
in
file list
a
on
to return to the Folder
the MP3/WMA
list,
use
menu
the v / V to
Press MENU to
On
a
move
highlight
to the next page.
switch MP3/WMA and JPEG
menu.
MP3/WMA
top of the
JPEG word
lighted. Then,
use
file, you
can
is
high-
b / B to select MP3/WMA
or
JPEG
then press ENTER.
Pause
1 Press PAUSE/STEP
WMA
playback,
PAUSE/STEP again.
Press .
track
or
or
to return
case
briefly
CD,
the track number
during playback.
22
or
names
should have
must
incorporate
They
should not
to
CD
step back
to go
using
a
Creator, which
cre-
maximum of 8 letters and
.mp3 or .wma extension.
contain special letters such as
an
/ ?
*:"<>letc.
?
The total number of files
on
the disc should be less
than 999.
directly
are
press
requires
discs and
recordings
to the
WMA
to the next
track.
previous
to any
optimal playback quality. Pre-recorded DVDs
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
MP3
briefly during playback to go
to the beginning of the current
of audio
File
rec-
achieve
>
Press . twice
In
press PLAY
to another Track
MP3 / WMA files. We
to meet certain technical standards in order to
during playback.
2 To return to
Moving
playback
This DVD/CD Receiver
MP3
CD
?
Press TITLE and
menu
on
to
format should be ISO 9660
ommend that you use Easy-CD
ates an ISO 9660 file system.
?
CD with MP3/WMA file and JPEG
or
impossible
and want
and press ENTER.
physical
track,
the numbered buttons
track.
enter
(0-9)
these
require certain pre-existing conditions (see
above) to ensure compatible playback.
Customers should note that
required
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has no
right to grant such permission. Permission should
always
be
sought
from the
copyright
owner.
JPEG Disc
Viewing
This unit
a
Operation
JPEG disc
JPEG
JPEG disc
as
play discs with JPEG files.
Before playing JPEG recordings, read the
JPEG Recordings on right.
1
can
Insert
disc and close the tray.
The JPEG menu appears on the TV
notes
on
?
a
screen.
with this
is limited
player
follows:
upon the size and number of JPEG
files, it could take a long time for the DVD/CD
Receiver to read the disc's contents. If you don't
Depending
see an on-screen
display
after several
minutes,
Operation
of the files may be too large
reduce the
resolution of the JPEG files to less than 2760 x
some
JPEG
2048
List
compatibility
Preview
---
pixels
and burn another disc.
JPEG Folder 1
?
JPEG Folder 2
The total number of files and folders
on
the disc
JPEG Folder 3
should be less than 999.
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
?
Some discs may be incompatible due to
recording format or the condition of disc.
?
Ensure that all the selected files have the
JPEG Folder 8
2
Press v / V to select
folder, and press ENTER.
A list of files in the folder appears.
If you are in a file list and want to return to the
previous
Folder
remote to
3
a
list,
use
the v / V buttons
on
?
the
and press ENTER.
highlight
extensions when
File
them
to be read
While
Windows
to the
to
move
".jpg"
layout.
the files
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
without
names
If you want to view a particular file, press v / V
to highlight a file and press ENTER or PLAY.
viewing a file, you can press STOP
previous menu (JPEG menu).
into the CD
different
If the files have
rename
?
copying
a
by
are
".jpg"
extension will not be able
this DVD/CD Receiver. Even
shown
as
JPEG
image
though
files in
Explorer.
ips
?
?
There
four Slide
:
Speed options
>
(Slow), >> (Normal), >>> (Fast) and II (off).
Use vVbBto highlight the Speed. Then, use b / B
select the option you want to use then press ENTER.
If you set Speed option to Off, Slide is not active.
are
SLIDE SHOW
Use vVbBto
to
JPEG
highlight
the
(Slide Show)
then
press ENTER.
JPEG
STILL PICTURE
1.
Press PAUSE/STEP
slide show.
during
The DVD/CD Receiver will
now
go into PAUSE
mode.
2.
To return to the slide
PAUSE/STEP
show, press PLAY
(.
or
>)
to advance to the next
or
once
during showing
ture clockwise
or
while
previous
TO ROTATE PICTURE
Press b / B
press
again.
JPEG
MOVING TO ANOTHER FILE
Press SKIP
or
a
viewing
a
picture
file.
JPEG
picture
to rotate the
pic-
counter clockwise.
23
Programmed Playback
MP3
CD
WMA
The program function enables you to store your favorite tracks from any disc in the receiver memory. A program
contain 300 tracks.
1
Insert
disc.
a
REPEAT PROGRAMMED TRACKS
1.
Audio CD and MP3/WMA Discs:
Audio CD
or
MP3/WMA
menu
appears
as
1/12
0:00:00
Audio CD
Press REPEAT when
below.
Press REPEAT to select
disc. The
repeat
a
desired
repeat mode.
JPEG
?
Program
a
1/104
MP3
List
playing
icon appears.
2.
0:00:00
can
Program
List
Track1
Track8
Music Folder 1
Track2
Track3
Music Folder 2
Track3
Track12
Music Folder 3
Track4
Track7
Music Folder 4
Track5
Track6
Music Folder 5
Track6
Track9
Music Folder 6
Track7
Track1
Track8
Track10
?
?
TRACK:
repeats the current track
ALL: repeats all the tracks on programmed list.
Off(No display):
does not
play repeatedly.
Music Folder 7
ERASING A TRACK FROM "PROGRAM"
Music Folder 8
LIST
Audio CD Menu
2
Select
or
a
select
track
"
on
the
MP3/WMA Menu
1.
to
2.
(Add)"
place
additional tracks
on
can
Press CLEAR.
Or, select
"
(Delete)"
icon then
press ENTER to place the selected track on the
Program list. Repeat to erase additional tracks on
the list.
the list.
ote
You
erase
"List", then press PROGRAM
icon then press ENTER to
the selected track on the "Program" list.
place
Repeat
Use vVto select the track that you wish to
from the Program list.
add all tracks in the disc. Select
"
(Add All)"
icon
then press ENTER.
ERASING THE COMPLETE PROGRAM
LIST
3
Select the track you want to start playing on the
"Program" list. Press MENU to move to the next
Use v / V to select
page.
4
ENTER to start.
Playback begins
programmed the tracks.
or
the order in which you
Playback stops after all of the tracks
"Program"
list have
To
normal
resume
select
a
played
on
in
the
once.
playback
from
track of AUDIO
list and then press PLAY.
24
(Del all)",
then press ENTER.
ote
Press PLAY
5 back,
"
programmed playCD (or MP3/WMA)
The programs
are
also cleared when the disc is removed.
DivX Disc
Using
this DVD/CD Receiver you
Insert
1
Operation
a
appears
disc and close the
on
the TV
can
play
DivX disc.
DivX disc
tray. The DivX
menu
as
with this
compatibility
player
is limited
follows:
screen.
?A vailable resolution size of the DivX file is under
720x576
1/12
0:00:00
(W
x
H) pixel.
DIVX
?
List
The file
name
of the DivX subtitle is available
20~40characters
Movie Folder 1
Movie Folder 2
Movie Folder 3
?
Movie Folder 4
Movie Folder 6
Movie Folder 8
?
Press v / V to select
a
folder, and press ENTER. A
"
_
the remote to
and press
highlight
ENTER.
3
If you want to view a particular file, press
v / V to highlight a file and press ENTER
4
Press STOP to exit.
PLAY.
not
30 per
operate normally.
is not interleaved, either video
or
audio is out-
putted.
?
If the file is recorded with GMC, the unit supports some of 1-point of the record level.
*
or
second, this unit may
over
?I f the video and audio structure of recorded file
list of files in the folder appears. If you are in a file
list and want to return to the Folder list, use the v /
on
"
express in the DivX
mark on the dis-
If the number of the screen frame is
1
V buttons
impossible code to
may be displayed as
play.
Movie Folder 7
2
(different by language).
If there is
file, it
Movie Folder 5
by
GMC?
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
MPEG4
There
encoders, like DivX
are
or
Xvid, have this option.
different levels of GMC
1-point, 2-point,
or
3-point
encoding, usually
called
GMC.
otes
?
Be
to select "SUBTITLE ON" mode before
sure
DivX file
?
ENTER every time.
When the Subtile has more than two languages in the
original
?
playback
The Pro
a
by pressing
Subtile is
logic
only
file,
available.
II Sound mode is not available for DivX file.
Playable
DivX file
z ".avi ", ".mpg ", ".mpeg
Playable
"
Codec format
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43
Playable
", "3IVX ", "MP42 ".
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
?
within 32
48 kHz (MP3),
Sampling frequency:
within 24 48kHz (WMA)
Bit rate: within 32 320kbps (MP3),
40
192kbps (WMA)
-
-
?
-
-
25
Operation
Additional Information
Last Condition
Memory
Controlling
DVD
This DVD/CD Receiver memorizes the
user
settings
for
the last disc that you have viewed. Settings remain in
memory even if you remove the disc from the player or
switch off the
If you load
the latest stop
player.
tings memorized,
ly recalled.
a
the TV
Your remote control is
DVD/CD Receiver
as
capable
well
of
operating
your
limited functions of LG TV.
as
Follow the instructions below to
operate for your LG TV.
disc that has its set-
position
is automatical-
Before
1
using
the remote
select the device to be
control, press the TV
operated.
To switch the remote control mode
different
device),
be
to
(to operate
a
to press the TV first.
sure
otes
Settings
are
stored in memory for
use
any time.
This DVD/CD Receiver does not memorize
settings
of
disc if you switch off the DVD/CD Receiver before
commencing to play it.
2
The
POWER, CH(4/3), VOLUME (+/-), and INPUT
buttons on remote control are used to operate the
LG TV.
a
Remote Control Codes for LG TV
Hold POWER and press PR/CH(+/-)
repeatedly until the TV on or off.
Screen Saver
The
Setting
appears when you leave the DVD
mode for about five minutes.
button
screen saver
player
in
Stop
ote
If the remote control does not
System
TV, try the other code
Select
You must select the
mode for your
appropriate system
TV system. If NO DISC appears in the display window,
press and hold P/STEP on the front panel or remote
control for
more
than 5 seconds to be able to select
system (PAL, NTSC
or
When the selected
a
AUTO).
system does
not coincide with the
system of your TV, normal colour picture may
not be
displayed.
AUTO:
Select when DVD/CD Receiver is connected
with Multi
NTSC:
system TV.
Select when DVD/CD Receiver is connected
with NTSC-TV.
PAL:
Select when DVD/CD Receiver is connected
with PAL-TV.
26
(4/3)
originally supplied
Due to the variety
or use
the remote control
with the LG TV.
of codes used
OUR COMPANY cannot
control will
operate your particular
by manufacturers,
guarantee that the
operate every model of LG TV.
remote
Operation
Presetting
You
can
preset
make
tuning,
with Radio
the radio stations
50 stations for FM and AM
sure
Before
(MW).
that you have turned down the vol-
Preset radio stations in the DVD/CD Receiver's memory
first (see "Presetting radio stations" on the left).
ume.
Press BAND
1
AM
2
3
on
the remote control until FM
(MW) appears
in the
display
or
2
until the
3
then
release.
when the DVD/CD Receiver tunes in
station. "TUNED" and "STEREO"
appear in the
4
stereo
a
program)
on
PR(3/4)
on
Press PROG./MEMO.
the remote control.
6 again.
to select the
remote
the remote control
or
a
weak
signal
repeatedly
in
step
3
manually.
appeared
in the
and then press PROG./MEMO.
cleared.
display window
again, the stations are
step
or
2.
TUN+
on
the
tuning,
itself and
change
to mode.
preset radio station directly
a
the number buttons
on
the remote control
a
(within
3
seconds).
For your reference
If an FM program is
Press MONO/ST.
disappears
stereo
If you have accidentally entered into the "CLEAR ALL"
and you do not wish to clear the memory, do not
press any key. After a few seconds, the "CLEAR ALL"
by
in
preset radio station directly.
For example, to listen to preset station 4, press 4 on the
remote control. To listen to preset station 19, press 1
then 9
Press and hold PROG./MEMO. for about two seconds
will go off
tuning
tuning, press TUN- b
control repeatedly.
can use
to select
To clear all the stored stations
and "CLEAR ALL" is
automatic
to 6 to store other stations.
or
to tune in the station
or
press and hold TUN- b or
TUN+ for about two seconds on the remote control.
station with
Press TUNING
want.
(DVD/CD, AUX, etc.,).
For manual
You
a
preset station you
-
To select
To tune in
the remote control
on
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or on the
remote control repeatedly.
For automatic
Repeat steps 3
display
PR(3/4) repeatedly
Use manual
The station is stored.
7
Press
To listen to non-preset radio stations
want.
on
window.
select another function mode
the remote control to select
5 the preset number you
FM appears in the
Press POWER to turn the DVD/CD Receiver off
preset number will flash in the display window.
Press
or
To turn off the radio
window.
display
Press PROG./MEMO.
A
(for
display
(MW)
Each time you press the button, the DVD/CD Receiver
tunes in one preset station at a time.
on
panel for about two seconds
frequency indication starts to change,
Press BAND until AM
The last received station is tuned in.
or
the front
Scanning stops
1
window.
And then every time you press BAND, FM and
AM (MW) changes alternately.
Press and hold TUNING
to the radio
Listening
in the
effect, but
the button
again
on
noisy
the front
panel
so
that "ST."
display window. There will
the reception will improve.
be
no
Press
to restore the stereo effect.
To
improve reception
Reorient the supplied antennas.
ote
If all stations have
already
been
entered, the FULL
message will appear in the display window for
moment and then a preset number will flash.
To
change
the
preset number, follow the steps
a
5-6
as
above.
27
Operation
Other Functions
XTS
Sleep
Timer
You
set the DVD/CD Receiver to turn off automati-
can
cally
1
at
a
specified
time.
Press SLEEP to set the desired
The SLEEP indicator and
play
2
Setting
sleep
sleep
time.
time appears in the dis-
window.
Each time you press SLEEP the setting changes
in the following order.
SLEEP 180 →150 →120→90→80→70 →60→50→
40→30→20→10 →OFF
ote
You can check the time remaining before the
DVD/CD receiver turns off.
Press SLEEP. The remaining time appears in the
display window.
You
(Excellent True Sound)
enjoy the vivid stereophonic sound of the
digital original source without any signal distortion.
can
Each time you press XTS during 2 channel mode,
the setting changes in the following order.
XTS-1→XTS-2→XTS-3→NORMAL...
Tips:
XTS- 1:
sound
XTS- 2:
source
front
Press MUTE to mute your unit.
You can mute your unit in order, for example, to answer
the telephone, "MUTE" indicator flashes in the display
window.
of sound at woofer
You
effect
via the
by playing the sound
rear speakers same as the
speakers.
can
operate both XTS-
1 and XTS- 2
simultaneously and it can complement the
relative degrading of the sound pitch of the
woofer at the XTS- 2 mode.
repeatedly.
Mute
sense
for you to satisfy with.
In the mode of 2 CH BYPASS, It creates the
high display
This function will change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMER
playing the movie with the weak bass
relatively to the general music, it
enforces the
XTS- 3:
Dimmer
When
ote
The XTS- 2 mode is
temporarily
disabled when
from 2.1 CH to 5.1 CH and it is enabled when
changing
changing it
to
2.1 CH.
XTS pro
The unique sound quality of the LG Technology creates
the optimum sound for you to play the perfect playback
of the original sound and to feel the living sound source.
Each time you press XTS pro the
the following order.
XTS-P ON
28
→
XTS-P OFF
setting changes
in
Language Codes
Use this list to
your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
input
following
initial
settings:
Language
Code
Language
Code
Language
Code
Language
Code
Abkhazian
6566
Finnish
7073
Macedonian
7775
Slovenian
8376
Afar
6565
French
7082
7771
Somali
8379
Afrikaans
6570
Galician
7176
7783
Spanish
6983
Albanian
8381
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Ameharic
6577
German
6869
Maltese
7784
Swahili
8387
Arabic
6582
Greek
6976
Maori
7773
Swedish
8386
Armenian
7289
Greenlandic
7576
Marathi
7782
8476
Assamese
6583
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Azerbaijani
6590
Gujarati
7185
Mongolian
7778
Tamil
8465
Bashkir
6665
Hausa
7265
Nauru
7865
Tatar
8484
Basque
Bengali; Bangla
6985
Hebrew
7387
7869
Telugu
8469
6678
Hindi
7273
7879
Thai
8472
Bhutani
6890
Hungarian
7285
7982
Tibetan
6679
Bihari
6672
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Breton
6682
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Bulgarian
6671
Interlingua
7365
Persian
7065
Turkish
8482
Burmese
7789
Irish
7165
Polish
8076
Turkmen
8475
Byelorussian
6669
Italian
7384
Portuguese
8084
Twi
8487
Cambodian
7577
Japanese
7465
Quechua
8185
Ukrainian
8575
Catalan
6765
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Chinese
9072
Kannada
7578
Rumanian
8279
Uzbek
8590
Corsican
6779
Kashmiri
7583
Russian
8285
Vietnamese
8673
Croatian
7282
Kazakh
7575
Samoan
8377
Volapuk
8679
Czech
6783
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Danish
6865
Korean
7579
Scots Gaelic
7168
Wolof
8779
Dutch
7876
Kurdish
7585
Serbian
8382
Xhosa
8872
English
Esperanto
6978
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
6979
Latin
7665
Shona
8378
Yoruba
8979
Estonian
6984
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Faroese
7079
Lingala
7678
Singhalese
8373
Fiji
7074
Lithuanian
7684
Slovak
8375
8471
8479
Country Codes
Choose
a
country code from this list.
Country
Afghanistan
Argentina
Code
Code
Code
ET
Country
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
AR
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
Czech
Republic
AF
Country
Code
Country
Ethiopia
Fiji
SG
SK
UG
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
29
Refrnce
Troubleshooting
Check the
following guide
for the
possible
of
cause
a
before
problem
contacting
service.
Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
the power cord
wall outlet.
The power is on, but
the DVD/CD Receiver
?
No disc is inserted.
?
Insert
does not work.
No
Plug
(Check
lit.)
picture.
?
The TV is not set to receive DVD
signal
?
output.
Select the
on
the TV
appropriate video input mode
so the picture from the DVD/
CD Receiver appears
?
The video cable is not connected
?
securely.
There is
no
sound
or
?T
?
The
?
connected with the
equipment
audio cable is not set to receive DVD
The audio cables
not connected
are
urn on
Select the correct
?
?
The audio
?
Replace
is poor.
?
The disc is
?
Clean the disc.
The DVD/CD Receiver
?
No disc is inserted.
?
Insert
does not start
mode of the
so
jacks
securely.
?T
playback picture
input
Connect the audio cable into the
The power of the equipment connected
with the audio cable is turned off.
The
jacks
you can hear the
sound from the DVD/CD Receiver.
securely.
?
screen.
the TV.
audio receiver
signal output.
?
the TV
securely.
The connected TV power is turned off.
a
on
Connect the video cable into the
?
very low-level
sound is heard.
only
into the
that the DVD or,
audio CD indicator in the DVD display is
a
disc.
securely
connecting
cable is
damaged.
dirty.
urn on
the
equipment
connected with
the audio cable.
playback.
a
it with
disc.
new one.
(Check
that the
DVD,
audio CD indicator in the DVD
or
display
is
lit.)
?
An
disc is inserted.
unplayable
?
Insert
a
(Check the disc
system and Regional code.)
playable
type, colour
?
The disc is
placed upside
down.
?
disc.
Place the disc with the
playback
side
down.
?
The disc is not
placed
within the
guide.
?
Place the disc
inside the
?
The disc is
?Amenu
is
dirty.
on
the TV
screen.
on
the disc
tray correctly
guide.
?
Clean the disc.
?
Press the SET UP button to turn off the
menu screen.
?
The
Rating
level is set.
?
Cancel the
the
Loud hum
or
noise is
?
The
plugs
and
jacks
are
dirty.
?
Wipe
or
change
level.
them with
a
cloth
slightly
mois-
tened with alcohol.
heard.
?
The disc is
?
The
?
dirty.
and
speakers
components
connected poorly.
are
The DVD/CD Receiver is located too
close to the TV.
30
rating
function
Rating
?
Clean the disc.
?
Connect the
speakers
and
components
securely.
?
Move your TV away from the audio
components.
Troubleshooting (Cont'd)
Cause
Symptom
Radio stations cannot
?
The antenna is
Correction
positioned
or
connected
poorly.
be tuned in.
?
Connect the antenna
?
Adjust
securely.
the antennas and connect
an
external antenna if necessary.
?
?
The
signal strength
weak (when tuning
tuning).
of the stations is too
?T
une
in the station
in with automatic
No stations have been
preset
or
preset
manually.
Refrnce
?
Preset the stations
?
Point the remote control at the remote
(page 27).
stations have been cleared
(when
tuning by scanning preset stations).
The remote control
does not work
?
The remote control is not
remote
properly.
?
sensor
pointed
at the
of the DVD/CD Receiver.
The remote control is too far from the
sensor
?
DVD/CD Receiver.
?
There is
an
Use the remote control within about 23
ft
obstacle in the
path
of the
of the DVD/CD Receiver.
(7 m).
?
Remove the obstacle.
are
?
Replace
panel
?
Press DIMMER
remote control and the DVD/CD
Receiver.
?
The batteries in the remote control
flat.
The front
panel display
is too dim.
?
Nothing
display.
is
displayed
on
the front
the batteries with
on
new ones.
the remote control.
31
Specification
Power
Power
External dimensions
CD/ VD
FM
AM
Refer to main label
Mass
Genral
Tuner
Refer to main label
supply
consumption
[MW]
(W
H
x
x
D)
x
56
x
310
Laser
Semiconductor
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
PAL
0.5 %
Video
1.0 V
laser, wavelength
More than 75 dB
650
nm
20 kHz
(1 kHz, NOP-3dB,
LPF/A-Filter)
More than 80 dB
87.5
-
(1 kHz, at 12W position) (20 kHz LPF/A-Filter)
(p-p), 75 Ω, negative sync., RCA jack
108.0 MHz
or
65.0
74.0
-
MHz,
87.5
-
108.0 MHz
10.7 MHz
60 dB
140
522
(Mono)
10,000 Hz
-
1,620 kHz
-
or
520
1,720 kHz
-
450 kHz
30W+30W(6Ωat1kHz,THD10%)
Front: 30W + 30W (THD 10 %)
Centre*: 30W
Outputs
MONITOR
Surround*: 30W
+
Subwoofer*: 70W
30W
(6Ω
at 30
(8Ω
at 1
kHz, THD
Hz, THD
10
10
%)
%)
Transmission
Output : 2.4GHz, Power Supply : DC 7V
Reception Output : 2.4GHz, Amplifier : 30W + 30W (6Ω,
(ACC25T)
(ACC25R)
Type
Impedance
Frequency Response
1
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
Speaker
Way
1
160
Speaker
Center
1
Way
-
H
are
x
D)
20000 Hz
(1m)
Speaker
160
-
Way
1
Speaker
Speaker
1
Speaker
Way
(1m)
65-1500Hz
82 dB/W
1
6Ω
8Ω
20000 Hz
86 dB/W
1
(1m)
160
-
20000 Hz
86 dB/W
70W
30W
60W
60W
140W
60W
kg
change
mm
92x115x80
0.5
without notice.
kg
mm
160x350x280
3.18
%)
Wireless
30W
92x115x80
to
1
Subwoofer
THD 0.1
30W
0.5
subject
Speaker
6Ω
86 dB/W
Rated
x
Front
6Ω
Sound Pressure Level
P/N: 3834RH0088N
status: Horizontal
35°C, Operation
625/50, NTSC 525/60
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
specifications
5°C to
140 Hz to 20 kHz
output
Stereo mode
and
mm
5% to 85%
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Wireless RX
Designs
360
Temperature:
Wireless TX
Speakrs
kg
Operating conditions
Operating humidity
Surround mode
Amplifer
2.5
kg
mm
(1m)
92x115x80
0.5
kg
mm
Download PDF

advertising