Product Overview Remote Controller Front of the unit Back of the unit • • • • • • • • • a • • • • • • • • • • 1 : Switches the unit ON or OFF. e f g FM ANTENNA k l FUNC : Selects the function and input source on the display window. (USB AUX PORT.IN FM USB...) a VOL +/- : Adjusts speaker volume. : Mutes the sound. Multimedia Speaker System USB : Changes to USB function. m BASS LEVEL: Adjusts Subwoofer volume. h a b c d • • • • • • • • • b • • • • • • • • • • i j n AUX : Changes to AUX function. b PORT.IN : Changes to LH70A PORT.IN function. FM/AUTO SCAN: -- Changes to FM radio function. aPORT. IN (ø 3.5mm) : Listens to music from your portable device. kFM ANTENNA bd/M : Playback / Pause -- Presets the radio station automatically. j Remote Sensor REPEAT : Plays to your files repeatedly or randomly. C/V : (Skip/Search) c -- Skips Fast backward or Forward. cC/V : Goes to the next or previous file. lAUX IN connectors(L/R) -- Searches for a section within a file. TUN. (- / +) : Scans the radio stations. - TUNNING + : Scans the radio station. mSPEAKERS connectors(L/R) d/M : (Play/Pause) dUSB Port (5 V 0 500 mA) -- Starts or pauses playback. nPOWER IN cable -- Selects STEREO/MONO. e1 POWER Power (ON/OFF) button Z : Stops playback. fDisplay window : Shows the current status of the unit. • • • • • • • • • c • • • • • • • • • • ENGLISH OWNER’S MANUAL gFUNC. : (Function: Selects a function among the (PORT.IN), or FM. USB, AUX, -- Searches for a folder of MP3 files. Please read this manual carefully before operating your set and retain it for future reference. hVOLUME(-/+) : Adjusts speaker volume. PRESET/FOLDER (+/-) : -- Chooses a preset number for a radio station. Battery Installation DIMMER : Press [DIMMER] once. The display window will be darkened by half. (To cancel it, press [DIMMER] again.) PROGRAM/MEMORY : Presets radio stations and stores. ? : The button is not available for any function. iBASS (-/+) : Adjusts Subwoofer volume. DELETE: Deletes saved radio stations. (R03 ) (R03) ø 3.5 mm *MFL69306404* Safety Information www.lg.com , Remove the battery cover on the rear of the Remote Control, and insert two (size AAA) batteries with 4 and 5 matched correctly. USB Port is not available for charging battery. External Device Connection (AUX) OPTION 1 USB Data Playback 1. Insert the USB storage device (or MP3 player, etc.) to the USB port on the front of the unit. USB Storage Device FM ANTENNA 2. Select the USB function by pressing [FUNC.] on the front of the unit or [FUNC] on the remote control. When you select USB function, the USB storage device will be played automatically. Satellite speakers (Left / Right) 3. Select a file you want to play by pressing C/V on the front of the unit or remote control. , MP3 Playback Requirement -- Bitrate : 32 kbps - 448 kbps -- Sampling Frequency : 8 KHz - 48 KHz FM ANTENNA Removing the USB Device from the unit : 1. Choose a different function or press Z on the remote control. 2. Remove the USB device from the unit. 1. Connect the satellite speaker cable to SPEAKERS (L/R) of the unit, matching respective colour connector. 2. Connect the [AUX IN] of the unit to output port of an external device or portable player using supplied (RCA) cable. 3. Plug the power cable into wall outlet. 4. Turn the Power on by pressing [1POWER] on the front of the unit or remote control. To Do this Stop Press Z on the remote control. Playback Press d/M on the front of the unit or remote control. Skipping to the next/previous file Press C/V on the unit or to skip the file in stop state. During playback, press V on the unit or remote control or to go to the next file. Playing less than 3 seconds, press C on the unit or remote control to go to the previous file. Playing after 3 seconds, press C on the unit or remote control to go to the beginning of the file. Pause During playback, press d/M on the unit or remote control. Searching for a section within a file During playback, Press and hold C/V on the unit or remote control and release it at the point you want to listen to. 5. Select [AUX] function by pressing [FUNC.] on the front of the unit or [FUNC] on the remote control. 6. Turn on the external device and start playing music. OPTION 2 If you want to connect an external device with AUX OUT(L/R) connector , connect it using Audio cable (L/R). Audio cable (L/R) (Not supplied) FM ANTENNA Playing repeatedly or randomly Press [REPEAT] on the remote control repeatedly, the display changes in the following order. 1 h / ALL h / ALL G / OFF FM ANTENNA , yy If you use an USB extension cable or USB hub, the USB device is not recognized. yy Some USB device may not work with this unit. yy During random playback, a same file that was being played may be played again. yy For a large capacity USB, it may take a few minute to be searched. , yy To prevent hearing damage when turning on the unit, always turn down the VOLUME and BASS before turning off the unit. yy If you do not intend to use the speakers for a long time, turn off the power. yy If your external player has only one output for audio(mono), connect it to the left (white) audio connector on the unit. Selecting a folder Listening to the radio 1. Press [PRESET/FOLDER +/- ] on the remote control repeatedly until a desired index number of folder appears. 2.Press d/M on the unit or remote control to play it. The first file of the folder will play. , Troubleshooting Radio Operation 1. Press [FM/AUTO SCAN] on the remote control or [FUNC.] on the unit until FM appears in the display window. FM antenna yy USB Folders/Files are recognized as below. FM ANTENNA The last received station is tuned in. 2. - Auto tuning: Press [TUN.-/+] on the remote control or [TUNING -/+] on the unit for about 1 second until the frequency indication starts changing, then release. scanning stops when the unit tunes in a station. - Manual tuning: Press [TUN.-/+] on the remote control or [TUNING -/+] on the unit repeatedly. 3. Adjust the volume by using [VOL +/-] on the remote control or the unit. , yy Be sure to fully extend the FM wire antenna before using the radio function. yy Before tuning, make sure to turn down the volume. yy Press d/M on the remote control. This will change the tuner from stereo to mono. Then the FM reception will be better than before. No Power yy The power cord is not plugged in. Plug in the power cord. heck whether electricity failed. Check the condition yy C by operating other electronic devices. No sound and sound distortion yy The unit or your external device’s volume is set to minimum. Check and adjust the volume of the unit. yy When you use external device at high volume, the sound quality may be deteriorated. Lower the volume of device. yy If you use the unit for purposes other than listening to music, the sound quality may be lowered or the unit may not work properly. The USB device does not start playback yy An unplayable USB device is inserted. Check the USB device. yy Check whether you selected right function. Pressing [FUNC.] button and check the selected function. Presetting Radio Station Radio stations cannot be tuned in properly. yy The antenna is positioned poorly. Adjust its position. yy The signal strength of the radio station is too weak. Tune to the station manually. Presetting the Radio Stations 1. Press [FUNC]on the remote control or [FUNC.] on the unit until FM appears in the display window. 2. Select the desired frequency by pressing [TUN.-/+] on the remote control or [TUNING -/+] on the unit. 3. Press [PROGRAM/MEMORY]. A preset number will blink in the display window. yy No stations have been preset or preset stations have been cleared (when being tuned by scanning preset channels). Refer to Presetting Radio Station yy File will be played from $ file No.1 to $ file No.14 one by one. 5. Repeat steps 2 to 4 to store other stations. You can preset up to 50 stations for FM. yy The Index number of folder will be presented in order recorded and may be presented differently according to the recording circumstances. 6. To listen a preset station, press [PRESET/FOLDER +/-]. The remote control does not work properly. yy The remote control is not pointed at the remote sensor of the unit. Point the remote control at the remote sensor of the unit. yy *ROOT : The first screen you can see when a computer recognizes the USB is “ROOT”. Using AUTO SCAN yy The remote control is too far from the unit. Operate the remote control within about 23 ft (7 m). 1. Press [FM/AUTO SCAN] on the remote control for longer than 2 seconds, all of the FM bands are scanned. yy There is an obstacle in the path of the remote control and the unit. Remove the obstacle. 4. Press [PROGRAM/MEMORY]. The station is saved. 2. Radio frequencies are saved automatically by preset number while FM bands are scanned. 3. To cancel the scanning, press Z or convert to other function. It will be cancelled. Deleting a saved Preset station 1. Select a desired Preset by pressing [PRESET/FOLDER -/+] and press [DELETE] on the remote control. 2. The selected Preset number will be blinked. 3. Press [DELETE] on the remote control to erase the saved preset number. , Specification Auto power down This unit will turn itself off to save electricity in the case were the main unit is not connected to an external device and is not used for 20 minutes. The unit will also turn itself off after six hours if the Main unit has been connected to another device using the analog inputs. Product type: -- 2.1 speaker system Power Supply -- Refer to the main label. Power Consumption -- 20 W Dimensions (W x H x D): -- Satellite: Approx. 110 (W) mm x 201 (H) mm x 115 (D) mm -- Subwoofer: 264 (W) mm x 370 (H) mm x 323 (D) mm Net Weight: -- Main Set : Approx. 5.44 kg Speaker (1EA) : Approx. 0.64 kg Operating Temperature: -- 0 °C to 35 °C Connectivity: -- 3.5mm stereo jack-male input jack Tuner: -- FM Tuning Range : 87.5 to 108.0 MHz or 87.50 to 108.00 MHz Impedance: -- Subwoofer: 6 (Ω) -- Satellite: 8 (Ω) Frequency response -- Subwoofer: 55 Hz~ 104 Hz -- Satellite: 40 Hz ≤ 20 kHz Total Max. power -- 70 W (THD : 10 %) Signal to noise ratio -- 75 dB yy Design and specifications are subject to change without notice. Press and hold [DELETE] to erase all saved radio stations. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due to electrical shock. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to. CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible. NOTICE: For safety marking information including product identification and supply ratings, please refer to the main label on the bottom or rear of the apparatus. This device is equipped with a portable battery or accumulator. Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, fire or the like. yy The battery in the remote control is exhausted. Replace the battery with new one. Cleaning the unit yy To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project