LG | LM-V1520A | LG LM-V1520A Owner’s Manual

LGEGF_LM-V1520/LM-V1521/LM-VS1520 (ENG)-74H
VCD MINI HI-FI
System
OWNER'S MANUAL
MODEL
:
LM-V1520
(LM-V1520A/S, LMS-V1520V)
LM-V1521
(LM-V1521A/S, LMS-V1521V)
LM-VS1520
(LM-VS1520A/S, LMS-V1520V, LMS-VS1520T)
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Designs
and
notice for
specifications
improvement.
are
subject
to
change
without
Precautions
CAUTION
CAUTION
Use of controls
cedures other
RISK OF ELECTRIC
of proresult
adjustments or performance
than those specified herein may
or
in hazardous radiation
exposure.
SHOCK DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE
Laser component in this product is capable of emitting radiation exceeding the limit for Class 1.
COVER(OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION:INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCKS DEFEATED. AVOID
EXPOSURE TO BEAM.
VARNING:OSYNLIG LASERSTR LNING NAR
DENNA DEL AR OPPNAD STR LEN AR FARLIG.
Attention:Quand l'appareil est ouvert,
Explanation Graphical Symbols:
s'exposer
lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
aux
ne
pas
radiations invisibles du faisceau laser.
The
alert the
to the presence of uninsulated
voltage within the product's enclo-
user
dangerous
This label is located
that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
sure
The exclamation
triangle
point
within
an
is intended to alert the
equilateral
user
to the
presence of
important operating and maintenance(servicing) instructions in the literature
accompanying the appliance.
on
the interior.
CLASS 1
LASER PRODUCT
KLASSE 1
LASER PRODUKT
LUOKAN 1
LASER LAITE
KLASS 1
LASER APPARAT
CLASSE 1
PRODUIT LASER
This
Compact Disc player is
LASER product.
classified
as a
CLASS 1
WARNING
The CLASS 1 LASER PRODUCT label is located
TO REDUCE THE RISK OF FIRE OF ELECTRIC
the exterior.
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
To avoid electrical shock, do not open the cabinet,
Refer servicing to qualified personnel only.
The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids,
such
as
vases, shall be
placed
on
the apparatus.
Warning:
Do not install this
a
book
2
case or
equipment
similar unit.
in
a
confined space such
on
Table of Contents
INTRODUCTION
Precautions...............................2
Recording...............................15
BasicSetting...........................15
15
Recording from Radio, CD or Auxiliary source
.15
CDtoTapeSynchronizedRecording.
.
TableofContents..........................3
BeforeUse................................4
.
.
.
.
.
.
.
.
NotesonTapes..........................4
CD/VCDPlayback.......................16-20
BasicPlayback.........................16
ToPausePlay..........................16
ToStopPlay...........................16
ToSkipaTrackorscene..................16
FrontPanel...............................5
ToSearchatrackorscene.................16
SafetyPrecautions........................4
NotesonDiscs..........................4
NotesonRemoteControl...................4
RemoteControl............................6
RearPanel................................7
DisplayWindow............................7
Connections.............................8-9
ToGotoaNextDisc.....................16
ToSelectaDiscDirectly...................16
.16
ToExchangeDiscsDuringPlayback.
LastSceneMemory......................17
.
.
.
.
.
.
.
.
TimeSearchFunction....................17
.10
DisplayFunction........................17
MultiplexFunction.......................17
.17
PBCPlay(PlaybackControlPlay).
DigestPlayback.........................18
RepeatPlayback........................19
ProgramPlaySetup......................19
MP3Playback..........................20
SettingtheCLOCK........................10
KARAOKE...............................21
Antenna(Aerial)Connections................8
TV/MonitorConnections....................8
SpeakerSystemConnection................9
BEFORE OPERATION
SettingtheVoltage(OPTIONAL).
.
.
.
.
.
.
.
.
.
.
.
.
SleepFunction...........................10
UsingMicrophone(OPTIONAL).
.
.
.
.
.
.
.
.
.
.
.
.
.10
TimerFunction............................11
.
.
.
.
.
.
.
.
.
KaraokeFunction........................21
ToAdjustECHOVolume...................21
.21
ToChangetheKey(KEYCONTROL).
RecordingwithKaraoke...................21
.
.
.
.
.
.
.
Reference
AudioAdjustment.........................12
VolumeAdjustment......................12
SoundQualityAdjustment.................12
SystemSelection(NTSC/PAL)...............22
MUTE................................12
DiscsRequirements.......................22
SURROUND...........................12
DISPLAYMODE.........................12
XDSS
(Extreme Dynamic Sound System)
.
.
.
.
.
12
Troubleshooting..........................23
Specifications
DEMO................................12
DIMMER..............................12
About the
AuxiliaryFunction.........................12
symbols
for instructions
Indicates hazards
OPERATION
itself
Presettingtheradiostations.................13
or
other
likely to cause
material damage.
Indicates
special operating
Indicates
tips
harm to the unit
features of this unit.
Listeningtotheradio......................13
TapePlayback............................14
BasicPlayback.........................14
ToStopPlay...........................14
TapeCounterReset......................14
.14
ToPlayFastRewindorFastForward.
Dubbing...............................14
.
.
.
.
.
.
and hints for
making
the task easier.
.
3
INTRODUC
Before Use
Precautions
Safety
Handling
When
Notes
the unit
shipping
on
Remote control
volatile
liquids,
such
contact with the unit for a
They
will leave marks
Cleaning
on
as
insecticide spray,
plastic products
or
long period
in
Remote control
battery
of time.
the
solution. Do not
benzine,
or
use
thinner,
are
a
extremely dirty,
mild detergent
these
as
might damage
alcohol,
the surface
of the unit.
Caution
Do not mix old and
Notes
batteries. Never mix different
discs
Hold the disc
playback side of the disc.
by the edges so that fingerprints
Notes
Do not touch the
on
new
types of batteries (standard, alkaline, etc.).
Discs
on
Handling
get
and
aligned correctly.
strong solvents, such
as
cover on
rear
batteries with
moistened with
lightly
battery
of the remote control,
and insert two R03 (size AAA)
the unit
soft cloth
use a
installation
Detach the
the surface.
soft, dry cloth. If the surfaces
a
from the front of the
About 30 in each direction of the front of the
To clean the cabinet
Use
(7 m)
remote sensor.
the unit. Do not leave rubber
near
and press
remote sensor.
the surface clean
use
About 23 ft
Distance:
Angle:
Do not
sensor
the buttons.
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
keep
operating range
Point the remote control at the remote
the unit
The
To
Remote Control
will not
the surface.
Do not stick paper
or
tape
on
the disc.
on
Tapes
Preventing overwriting
a
recording
Removing the safety tab(s) of the cassette (with
screwdriver) will prevent accidental erasure.
a
small
Side A
Tab for side A
Storing
After
discs
playing,
Tab for side B
store the disc in its case.
Do not expose the disc to direct sunlight or sources
of heat, or leave it in a parked car exposed to direct
there may be
increase inside the car.
sunlight,
as
Cleaning
a
considerable temperature
To record
again,
cover
the hole of the tab with adhesive
tape.
discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Adhesive tape.
Do not
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for
4
analog
records.
Front Panel
23 22 21
1
324
56
16
78
15
910
11
14
13
12
1.
2.
POWER
?
?
?
3.
?
?
?
4.
?
?
?
5.
6.
(STANDBY/ON)
button
8.
?
OPTIONAL
:
?
10. EQUALIZER knob
SCAN
+
button
button
+
11
NORMAL DUBBING
MENU
SCAN
button
PUSH OPEN
.
?
?
?
HIGH DUBBING
(HI-DUBB.)
button
(REC
PUSH OPEN
14.
)
button
15.
?
?
?
?
?
?
(DECK A)
18.
PREV./NEXT button
)
buttons
TAPE REWIND/FAST FORWARD
buttons
(
button
)
RETURN button
SELECT
(SEL.)
FORWARD PLAY
(
6.3mm
(MIC):
MIC VOLUME KNOB
-
(DECK B)
OPTIONAL
(MIC VOL.)
-
OPTIONAL
?
CD SYNC. button
MODE/RIF button
(
20. CLOCK button
/
21. CD OPEN/
CLOSE(
)
button
22. DISC SKIP button
23. DISC DIRECT PLAY buttons
(DISC1, DISC2, DISC3)
button
)/ CLEAR
TAPE B
19. TIMER button
/
REVERSE PLAY
MIC SOCKET
position
-
17. XDSS button
PRESET DOWN/UP button
(
TAPE A
16. VOLUME DOWN/UP knob
TUNING DOWN/UP button
STOP
position
-
button
)
?
(EQ)
13. MULTI JOG SHULLTE
?CDSKIP(
?
6.3mm
(PHONES):
12. SURROUND ADJUST knob
button
-
-
(NOR-DUBB.)
HEADPHONE SOCKET
?
?
ENTER button
MENU
FUNCTION SELECT buttons
?
MEMO. button
9.
RECORD/ RECORD PAUSE
?
PROG. button
DEMO button
(TUNER, TAPE, CD, AUX)
7.
?
PBC button
PLAY MODE button
INTRODUC
20
19
18
17
button
)
button
CD PAUSE button
SET button
COUNTER RESET button
5
Remote Control
1
2
TUNER
CD
TAPE
POWER button
2.
Function select buttons
(TUNER, CD, TAPE, AUX)
24
MUTE
POWER
1.
AUX
3.
PRESET
4.
Numeric buttons
5.
VCD/CD CONTROL buttons
(-/+)
buttons
PRESET
3
12345
-
4
PAUSE
STOP
D.SKIP
6
7
8
9
PREV.
NEXT
b-KEY CON-#
MPX
L.MEMORY T. SEARCH
ECHO
DISPLAY
FANFARE /
SCORE DIGEST NTSC/PAL
DISC SKIP
(D.SKIP)
22
21
11
-
20
19
SURR.
-
PREV./NEXT
(
)
/
REPEAT
PROGRAM
KEY CONTROL buttons
KARAOKE
7.
FANFARE
TAPE
8.
MPX button
9.
ECHO button
17
16
DIMMER
-
6.
CD/
TAPE B
10
(b
KEY CON
(OPTIONAL) /SCORE
-
#
)
button
10. TAPE A/B SELECT buttons
DISP.MODE
VOLUME
XDSS
15
11 .TAPE FUNCTION buttons
SLEEP
-
-
14
-
FAST REWIND/FAST FORWARD PLAY
BACKWARD PLAY
FORWARD PLAY
-STOP(
-
12.
?
?
?
(
): OPTIONAL
(
)
)
RECORD/RECORD PAUSE
DISPLAY MODE
SURROUND
(DISP.MODE)
(SURR.)
button
14. SLEEP button
15. VOLUME +/- buttons
16. EQ PATTERN button
17. DIGEST button
18. NTSC/PAL button
19.
L.(Last) MEMORY
button
20. DISPLAY button
21.
(
)
DIMMER button
13. XDSS button
T.(Time) SEARCH
22. RETURN
(
23. PBC button
24. MUTE button
6
-
EQ.PATT
12
13
-
)
REPEAT PROGRAM RETURN
18
TAPE A
)
-STOP(
PBC
23
5
)/SELECT
(
-PAUSE(
67890
SELECT
PLAY
)
button
button
button
(
/
)
Rear Panel
LM-V1520A/S Model
LM-VS1520A/S Model
LM-V1521A/S Model
1
1
AM
GND
FM
AM
GND
FM
234
234
+
+
L
L
-
-
5
-
R
R
+
+
REAR
7
FRONT
7
6
6
1.
ANTENNA Terminal
5.
SPEAKER Terminal
2.
AUXILIARY INPUT Jack
6.
VOLTAGE SELECTOR
3.
AUDIO
7.
POWER Cord
4.
VIDEO OUT Jack
(CD) OUT
Display
5
-
Jacks
:
OPTIONAL
Window
123456
789
10
MP3
11
20
AUO
12
13
19 18 17
16
15
14
1.
PLAY/ PAUSE indicator
2.
PROGRAM indicator
3.
MP3 indicator
4.
REPEAT indicator
15. MUTE indicator
5.
SLEEP indicator
16. LEVEL indicator
6.
TIMER indicator
17. SURROUND indicator
7.
FM STEREO RECEIVING indicator
18. MIC indicator
8.
CD SYNC. indicator
19. DISC Number indicator
9.
MEMORY indicator
20. XDSS indicator
14.
?
?
?
RECORD / RECORD PAUSE indicator
NORMAL DUBBING indicator
HIGH DUBBING indicator
-
OPTIONAL
10. CD TRACK indicator
11
.
CD TRACK OVER indicator
12. AUTO TUNING RECEIVING indicator
13.
?
?
?
PLAY MODE SELECT indicator
TAPE PLAY DIRECTION indicator
TAPE A/B SELECT indicator
7
INTRODUC
Connections
Antenna
(Aerial) Connections
Connect the
supplied
(1)
2 BAND
AM/FM
(FM/AM)
(or SW
:
OPTIONAL)
antennas for
2)
AREA
AM
3 BAND
MW
loop antenna
(aerial) (Supplied)
listening
loop
(aerial)
FM external
FM indoor antenna
antenna(aerial)
(not supplied)
coaxial
AREA
(FM/MW/SW)
antenna
FM external
75
to the radio.
(aerial)
Position it for the
best reception
cable
antenna(aerial)
(not supplied)
coaxial cable
FM indoor
antenna(aerial)
FM
Position
it for the
best
MW ANTENNA WIRE
reception
TWISTED LINE
FM ANTENNA WIRE
SW Antenna
otes
To prevent noise pickup, keep the AM loop antenna away from the unit and other components.
Be sure to fully extend the FM antenna wire.
After
connecting
to
Connecting
TV
the FM antenna wire,
keep
it
as
horizontal
as
possible.
TV/Monitor
a
Monitor
or
AM
GND
FM
To TV Video In
VIDEO VIDEO
AUDIO AUDIO
To Video out
To TV or VCR etc.
(To Audio In)
IN
OUT
To AUX Jack
VIDEO OUT
jack
connection
Connect the VIDEO OUT
AUDIO OUT
jacks
jacks
on
the back of the unit to
a
VIDEO IN
jack
of
a
TV
or
monitor.
a
AUDIO IN
jack
of
a
TV
or
monitor.
connection
Connect the AUDIO OUT
AUX
jack
jack
on
the back of the unit to
connection
Two
phones jacks marked AUX are provided on the back of the unit for connecting other
(For example, a record player with a pre amplifier, video recorder or tape recorder.)
units.
otes
Refer to the owner's manual of your TV as well.
When you connect the unit to your TV, be sure to turn off the power and
before making.
8
unplug
both units from the wall outlet
Connections
Speaker System Connection
Connect the
cords. To
speakers using the supplied speaker cords by matching the colors of the terminals and those
obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.).
of the
LM-VS1520A/S Model
Left
speaker (Rear)
(LMS-VS1520T)
Right speaker (Rear)
(LMS-VS1520T)
Right speaker (Front)
(LMS-V1520V/LMS-V1521V)
INTRODUC
Left
speaker (Front)
(LMS-V1520V/LMS-V1521V)
Red
+
L
-
Black
-
R
+
REAR
FRONT
Red
LM-V1520A/S Model
LM-V1521A/S Model
Red
+
L
-
-
Black
R
+
Right speaker
(LMS-V1520V/LMS-V1521V)
Left
speaker
(LMS-V1520V/LMS-V1521V)
Red
Notes
?
Be
are
?
sure
speaker
cord to the
appropriate
terminal
on
the components:
+
to
+
and
--
to
--.
If the cords
reversed, the sound will be distorted and will lack base.
If you
the
to match the
use
front
speakers
with low maximum
input rating, adjust
the volume
carefully
to avoid excessive
output
on
speakers.
9
the
Setting
Voltage (OPTIONAL)
If your set is equipped with a voltage selector at the back side, be
connecting the AC power cord.
Press CLOCK.
(If
to set it to your local power
supplied
before
the CLOCK
Setting
1
sure
the clock is
requires setting, press
CLOCK for more than 2 seconds.)
The hours begin to blink.
and hold
4
Use MULTI JOG SHUTTLE to set the correct
hours.
-
2
Select
a
turning
24 hour
cycle
When the
To
6
Use MULTI JOG SHUTTLE to set the correct
cycle by
minutes.
Press SET and the correct time is shown
7
the
8
Press CLOCK at any time to
for about 5 seconds.
(24HR)
or
Press SET to confirm the selected hour
cycle.
on
display.
display
the time
Function
Sleep
1
12 hour
MULTI JOG SHUTTLE.
(12HR)
3
or
5
Press SET.
sleep
timer is used, the power is
specify
the time
delay
automatically
before the power is
turned off, press SLEEP.
In the
turned off after the
2
window you can see
for
about 5 seconds. This means that the system
turns off automatically after 90 minutes.
display
before it turns off is
pressed the time interval
reduced by 10 minutes. i.e.
80...70... etc.
Select the desired time to turn off.
To check the
time has
remaining
elapsed.
time until the power is
turned off.
function is active press SLEEP
The time remaining until it turns off is dis-
While the
briefly.
played
Each time the button is
specified
sleep
for about 5 seconds.
Note
If you press SLEEP while the
the SLEEP time is reset.
To cancel the
sleep
sleep
time is
displayed,
timer mode
If you wish to stop the function, press the SLEEP button
repeatedly until 10 appears, and then press SLEEP
once again while 10 is displayed.
Using Microphone (OPTIONAL)
You
sing to a music
microphone to the unit.
can
source
by connecting
For your reference
You can record during
a
Refer to the
1
2
Connect your
MIC socket.
3
Sing along with the accompaniment.
Adjust the microphone volume by turning MIC
Play
a
microphone (not supplied)
to the
Notes
?
When not
using
the
knob to minimum
music you want.
?
VOLUME KNOB.
using microphone.
"Recording" explanation section.
?
or
microphone,
set the MIC volume
turn off the MIC and remove the
microphone from the MIC socket.
If the microphone is set too near the speaker, a
howling sound may be produced. In this case, move
the microphone away from the speaker or decrease
the sound level by using the MIC volume control.
If sound through the microphone is extremely loud, it
may be distorted. In this case, turn the MIC volume
control toward minimum.
10
Timer Function
With the TIMER function you can have the radio reception and
and recording turned on and off at the time desired.
1
Press CLOCK to check the current time.
TUNER-CD-TAPE flashes in the
memorized TIMER
button
The
previous
setting, press and
previous
memorized timer
indicators appear in the
on
hold the TIMER
time and TIMER
display.
9
10
1.
12
Press SET.
13
14
Adjust
When you select the TUNER function,
'PLAY' and 'REC' indicator flash in
the
display
window
alternately
for
about 3 seconds.
'PLAY' indicator
TUNER
play only
'REC' indicator : TUNER play and
recording
b. select the previous memorized preset
:
number with MULTI JOG SHUTTLE
and press SET.
'ON TIME' indicator appears for about
0.5 seconds in the display window and
MULTI JOG
2. When you select the CD function,
'ON TIME' indicator appears for about 0.5
seconds in the display window and then
-
15
5
6
Press SET to confirm the hour to switch
by turning
MULTI JOG
SHUTTLE.
turning
MULTI JOG
"TIMER" appears in the display window and the
setting
has been
completed.
Switch the system off.
The selected function is
on
automatically
switched
and off at the time set.
or
check the timer
Each time the "TIMER" button is
select the timer set
setting
ton so
Set the hour to switch
the volume level
Press SET.
or
cancel. You
pressed
can
you can
also check the
status.
check the timer, press the "TIMER" butthat "TIMER" appears in the display window.
To activate
disappears.
MULTI
SHUTTLE.
timer
timer
turning
JOG SHUTTLE.
To cancel
disappears.
on
turning
Set the minute to switch off
-
then
on.
Press SET.
Press SET when the desired function is
3 flashing.
4
MULTI
.
11
a.
by turning
play
SHUTTLE.
than 2 seconds.
more
disappears
Set the hour to switch off
For your reference
If you want to correct the
source
'OFF TIME' indicator appears for about 0.5
seconds in the display window and then
in
turn.
on
auxiliary
Press SET to confirm the minute to switch
Press TIMER to enter the timer
setting mode.
display window
or
JOG SHUTTLE.
8
If you don't set clock, timer function doesn't work.
-
Set the minute to switch
7
For your reference
2
recording, CD play, tape play
or
To cancel the TIMER, press the "TIMER" button
"TIMER" disappears in the display window.
so
that
on.
11
BEFORPATIN
Audio
Adjustment
Volume
SURROUND
Adjustment
?Turn VOLUME DOWN/UP knob clockwise to increase
?
the sound level,
Press VOLUME
or
counterclockwise to decrease it.
(+)
press the VOLUME
control.
Sound
to increase the sound
level,
To activate surround mode
?You
?
or
Select
?
SURROUND OFF
Quality Adjustment
→
SIMULATED LOW
→
changes
SIMULATED HIGH
↑
choose between 8 fixed sound
can
desired surround mode
impressions.
by using the
Each you press the button the indication
as follows.
?To activate stereo sound
-You
a
choose between 6 fixed sound
SURROUND button.
to decrease it on the remote
(-)
can
impressions
MOVIE HIGH
←
MOVIE LOW
←
MUSIC HIGH
←
MUSIC LOW
and 1 USER MODE.
Select
buton
-
desired sound mode
a
(
or
turning EQ
knob
the EQ. PATT
by using
the front
on
panel).
Whenever you press DISPLAY MODE (DISP.MODE),
you can enjoy the spectrum change with 6 types in the
When you select USER MODE, press the ENTER
button repeatedly.
You
select Three of sound mode
can
DISPLAY MODE
display.
(BASS,
MIDDLE, TREBLE).
-
Each you press the button the indication
follows.
FLAT
ROCK
→
→
POP
→
VOCAL
changes
as
-
CLASSIC
→
↑
-
USER MODE
?Headphone
Connect
a
SAMBA
←
←
SALSA
JAZZ
←
Jack
stereo
headphone plug ( 6.3mm)
Press XDSS to reinforce treble, bass and surround
effect.
Each you press the button the indication
follows.
Press MUTE to mute your unit.
You can mute your unit in order, for
→
XDSS1 ON
→
when
to answer
"MUTE" indicator flashes in the
as
XDSS2 ON
DEMO
Press DEMO in power off state to demonstrate the
function in the display.
To cancel it, press POWER or DEMO
demonstration in power-on status you
example,
changes
into the
MUTE
telephone,
(Extreme Dynamic Sound System)
XDSS OFF
headphone jack.
The speakers are automatically disconnected
you plug in the headphones (not supplied).
the
XDSS
by using
again. During
can
cancel it
the other buttons.
display
window.
DIMMER
This function is darken the
display
window
by
half in
power-on status. Press DIMMER once, and the display
is darken, and if you press it once more, the display will
darken by half too. To cancel it press the button again.
Auxiliary
1
2
12
Connect
an
Function
auxiliary
device i.e. TV
or
VCR, via the
rear
mounted AUX
phone jacks.
Notes
Press AUX.
You
can
also record from the
see
Recording Section.
auxiliary input
source,
the radio stations
Presetting
You
can
preset 30 stations for FM and AM (or SW
:
OPTIONAL).
Before
make
tuning,
that you have turned
sure
down the volume to the minimum.
Press POWER to turn
1
2 OPTIONAL)
To tune in
the unit.
on
a
station with
SW
AM
station
(or
display window.
or
appears in the
:
To clear all the memorized stations
And then every time you press TUNER, FM and
AM (or SW : OPTIONAL) changes alternately.
Press TUNING DOWN/UP
until the
signal
manually.
Press and hold MEMO.
4
weak
Turn MULTI JOG SHUTTLE in step 3 to tune in the
Press TUNER until the FM
3
a
frequency
on
the front
indication starts
panel
to change,
then release.
the front
on
seconds, "CLEAR" appears in the
then press CLEAR
again,
panel for about two
display window and
the stations
are
cleared.
For your reference
If all stations have already been entered, FULL message
will appear in the display window for a moment and then
preset number will flash. To change the preset number,
follow the steps 6-7 on the left side.
a
Scanning stops
when the unit tunes in
a
station.
To recall
5
6
7
8
Press MEMO.
A
2
panel.
in the display
Press PRESET DOWN/UP
on
the remote
Press and hold PRESET DOWN/UP
the front
preset number will flash
control)
Press MEMO.
-
on
the front
)
preset
Tuning
Tuning
panel again.
Repeat steps
in
or
control) until the
press it repeatedly.
desired preset
automatically
in
manually
3 to 6 to store other stations.
to the radio
Press TUNER until AM
AL) appears
in the
or
FM
display
(or SW
:
OPTION-
function mode
Press PRESET DOWN/UP
on
the remote
(or PRESET
control) repeatedly to select
preset station you
To turn off the radio
Press POWER to turn the unit off
window.
The last received station is tuned in.
For your reference
If an FM program is
the
Press MODE/RIF
want.
For manual
tuning,
see
in
manually"
on
on
previous
see
"Tuning
in
that "STEREO"
disappears
in
To
improve reception
Reposition the supplied
Use MODE/RIF
(Radio
function to switch the
the
automatically"
noisy
antennas.
Notes
?
previous
page.
For automatic tuning,
AUX).
display window. There will be no stereo effect,
but the reception will improve. Press MODE/RIF
again to restore the stereo effect.
radio stations
"Tuning
so
or
select another
or
the
the volume
non-preset
TAPE
(CD,
?
by rotating VOLUME
DOWN/UP KNOB (or pressing VOLUME (-/+)
the remote control) repeatedly.
Adjust
To listen to
the
the remote
PRESET
The station is stored.
?
?
or
Turn MULTI JOG SHUTTLE.
?
?
(
Press TUNING DOWN/UP.
Each time you press the button, the unit tunes in
one preset station at a time.
3
on
number appears
(or PRESET (
to select the
()
window.
number you want.
Listening
1
on
presets
on
Interference
mono
Filter)
reception if stereo
reception is distorted by noise.
When recording the MW(AM) or
noises
occur.
LW broadcast, beat
If it does, press MODE/RIF
once.
page.
13
OPERATION
Tape Playback
Basic
1
Press TAPE
repeatedly to select TAPE A or TAPE
("NO TAPE" appears in the display window.)
2
Open
3
Insert
4
To
Playback
cassette TAPE A
PUSH OPEN
or
:
After auto stop deck
Playing
time appears
during playback.
"TAP A(or B) 0000" in display
window.
with the
tape side
to
(or B).
OPTIONAL).
To
Play Fast
Rewind
or
Fast Forward
/
on
pressing and holding
/
the front panel or
on the remote control
during playback, press PLAY ( ) at the point you
After
Dubbing
(TAPE A/B)
plays only
front side, the unit stops
automatically.
AUTO REVERSE DECK
can
pressing
Pressing
(TAPE A or B): OPTIONAL
select direction of the cassette you want
Once
Twice
Three
times
1
Press TAPE
or
TAPE-A/ B.
?Cassette TAPE A- Insert
a
playback tape
?Cassette TAPE B- Insert
a
blank tape.
to dub.
PLAY MODE.
2
Function
Display
Press NOR-/ HI-DUBB.
Pressing
or
B
DUBB.
After the cassette of TAPE A
DUBB
plays front and
automatically.
reverse
B
or
B
six times
plays
reverse
repeatedly front and
side, stops automatically.
cassette of TAPE A and B
a
six times
reverse
follow.
Function
Display
Normal
speed
dubbing
HI-
Double
speed
dubbing
side, stops
After the cassette of TAPE A
plays
or
as
NOR-
plays front or reverse (backward
play) side, stops automatically.
After
Forth
This function shows how to record from tape to tape.
by
After the cassette of TAPE A
14
) during playback.
want.
AUTO STOP DECK
You
STOP(
Press COUNTER RESET
position.
the bottom and then close the TAPE A
(
Press
Tape Counter Reset
(or B) by pushing
one or two cassette
Press PLAY
B.
Stop Play
repeatedly front and
side, stops automatically.
To stop
dubbing,
Press
STOP(
).
Recording
Wind the tape to the point
Use only normal tapes.
You
can
Basic
1
2
recording
starts.
record from cassette deck B
only.
CD to
Setting
Press CD
Open
TUNER.
or
the cassette TAPE B and insert
cassette into the cassette
a
blank
The CD
a
complete CD
and
a
cassette.
1
synchro recording function dubs
programmed titles automatically into
Press CD SYNC. in stop mode.
"
REC" flashes and
display
compartment.
recording direction :OPTIONAL
PLAY MODE repeatedly to set the recording
To set the
Press
Tape Synchronized Recording
2
"
"
displays
in the
window.
The
synchronized recording is started
matically after about 7 seconds.
auto-
direction.
Pressing
Function
Display
Once
Recording
Notes
?
front side.
If you wish to record from the desired track, select
the desired track with
Twice
Recording
Three times
reverse
?
front and
side.
/
before
commencing CD synchro recording.
The function change is not possible during
recording.
Forth
Recording
from Radio, CD
or
Auxiliary
source
1
Press RECORD/ RECORD PAUSE
)
button
(REC
or
.
"
REC" flashes and holds the cassette in pause
mode.
PLAY( ) on the
The recording begins.
To Pause recording
2
Press
front
panel.
To pause the recording, press RECORD/ RECORD
PAUSE (REC
or
) button again.
"
To
REC" flashes in
display
window.
Stop recording
Press TAPE
STOP(
).
15
OPERATION
CD/VCD
Playback
To Search
Preparation
In case of
Turn
can
a
TV
input
that you
so
view the
Turn
pictures from this unit.
of using an amplifier
the amplifier and select the CD player position
on
that you
Basic
can
(When
desired
repeatedly during playback.
scene is displayed, press PLAY (
FRX1
listen to the sound from this unit.
).)
FF X1
Playback
Press POWER to turn
on
the unit.
Press the CD button to select CD function.
?
If
a
or scene
(TV screen)
?
1
2
/
Press
the TV and select the video
on
In case
so
using
track
a
no
disc is in the disc drawer, the "NO DISC"
The
(reverse) is relatively slow at
first. When the button is pressed again, the speed
becomes faster. (Each time the button is pressed, the
speed increases up to 4 steps.)
The speed will be retained even after the button is
speed
of advance
released.
indicator appears.
3
Press CD OPEN/CLOSE
(
disc into the disc tray.
The disc on the left (DISC
and
)
1)
is
place
played
the
ToGotoaNextDisc
Press D.SKIP
first.
To Select
With the label side up
during playback
a
Disc
Press DISC 1, DISC 2
in Stop mode.
or
in
Stop
mode.
Directly
or
DISC 3
during playback
or
When you press DISC 1-3 before playing a disc, the unit
will automatically start playing the selected disc.
ote
To load
an
8cm
(3 inch) disc, put it onto the inner cir-
cle of the tray.
4
5
Press CD OPEN/CLOSE
(
)
to close the disc
To
Exchange
You
can
Discs
During Playback
open the disc tray while playing a disc to check
what discs are to be played next and exchange discs,
without
interrupting playback
of the current disc.
compartment.
Press
or
on
1
the remote control.
Press CD OPEN/CLOSE
( ).
The disc tray is opened. Two disc compartments
appear. Even if the unit is playing a disc, it doesn't
stop playing.
To Pause
Play
Press CD PAUSE
(CD
)
or
PLAY/ PAUSE
(
)
during playback.
Press the button
again
to resume
2
play.
Replace
discs in the compartments with other
ones.
the disc in the left compartment
after the current disc, and then the one in the
The unit
plays
right compartment.
To
Stop Play
Press STOP
To
Skip
a
(
3
) during playback.
Track
Press CD OPEN/CLOSE
( ).
The CD door closes.
or scene
otes
?Turn MULTI JOG SHUTTLE to select the track.
?
?
Press NEXT button to go to the next
track.
scene or
Press PREV. button to go to the back
scene or track.
16
preceding
Do not
place
more
than
one
compact disc
on one
disc tray at the same time.
Do not push on the disc tray to close CD door, you
may damage the unit.
CD/VCD
Playback
Last Scene
Multiplex Function
Memory
point you stopped a VIDEO CD
you can resume playback from that point.
not available during playing an audio CD.
The unit memorizes the
You
and
and listen to the sound of the selected channel
It is
can
select the sound from the
both the
and left
right
right
or
left channel
through
In this case, the sound
speakers.
loses the stereo effect.
1
2
Press STOP
) during playback.
Press L. MEMORY
The unit starts
?
stopped
?
3
(
on
Press MPX
from the
point
you
on
the TV
Press CD OPEN/CLOSE
disc into the disc tray.
The disc on the left (DISC
screen.
(CD )
and
place
is
played
a
Time Search function is
discs that have
only
a
time
as a
guide
to
useful when
during playing
playing
stopping.
or
(TV screen)
TIME SEARCH
PBC
?
_
_:_
right
You
STEREO
can
hear the sound of the
channel.
can
hear the standard
stereo sound.
This screen doesn't appear on the display window.
This function doesn't work for TUNER, TAPE and
AUX functions.
VIDEO CD.
especially
hear the sound of the
otes
few track divisions.
Press T.SEARCH
1
elapsed
You
MONO R
times
can
left channel.
first.
Time Search Function
use
You
the
Three
This function lets you
find a certain point on
Function
MONO L
Once
Twice
1)
disc.
Screen
Pressing
the VIDEO CD in step 1.
"RESUME" appears
a
Each time you press the button, the indication and the
sound from the speakers change as follows.
the remote control.
playback
during playing
Play (Playback Control Play)
playing VIDEO CD with PBC functions (Version
discs), you can enjoy playing simple interactive
When
2.0
_
software, software with search functions, etc.
?
2
Press the NUMERIC buttons to enter the time
of the
point that you want to locate.
Playback is started automatically from the
?
entered
time.
PBC
play allows you to play VIDEO CD interactively,
following the menu screen on the TV screen.
Also refer to the instructions supplied with the disc, as
the operating procedure may differ according to the
VIDEO CD.
`
TIME SEARCH 22:15
1
AUDIO CD and
2.0
?
during Digest Play
VIDEO CD with PBC function (Version
,
discs).
Display
during playing.
You can view the elapsed time per a track.
Press DISPLAY again during playing.
view the remained time per a track.
Press DISPLAY once more during playing.
-
You
You
(
Select the
view the total remained time
on
the disc.
display
window.
number you want by pressing
NUMERIC buttons on the remote control.
menu
The selected item is
To
now
executed.
Stop play
Press STOP
can
can
).
(Or Select the menu number you want by pressing the MENU (-)/(+) on the front panel, and then
press the PLAY ( ) or SELECT button.)
Press DISPLAY
-
?
2
Function
-
?
PLAY
"PBC" appears in the
For your reference
This function can not be used
?
Insert VIDEO CD with PBC function, press
(
) during playback.
Togothenextofamenu
Press NEXT.
To go back to
a
previous
menu
Press PREV..
Togobacktothetopofamenu
Press RETURN
(
).
17
OPERATION
CD/VCD
Playback
Disc
Digest Playback
You
otes
If you start
Digest play
You
can
playing
playing a
unit automatically
without PBC functions.
1
Press NUMERIC button 2.
During playing a VIDEO CD
shows still picture of the first
?
Setting
to 9.
locate the disc
several still
pictures
Press DIGEST
The
screen.
before you start
VIDEO CD with PBC functions, the
Basic
locate the track you want by observing the first
of 9 tracks on the disc at one time on the TV
can
picture
This function is not used in MP3 file CD.
starts
Digest Playback
following
you want
time on the TV
or scene
at one
appears
on
1.INTRO
2.DISC
3.TRACK
4.EXIT
the TV
screen.
1
2
3
8
9
4
7
6
5
To view still
Playback
Press NUMERIC button 1.
only plays
or scene on
10 seconds the
beginnings
of
2
of the tracks of the
pictures
tracks numbered
over
Press NEXT
).
The TV
(
screen
9
shows still
To go back to the
?
each track
of tracks 1
scenes
screen.
?
This function
screen
Current disc
by observing
DIGEST MENU
?
the TV
during stopping.
menu
Intro Scan
,
pictures of tracks 10 to 18.
previous screen, press PREV..
Press NUMERIC buttons to select the track you
want.
The unit starts
playing
from the selected track.
the disc.
To cancel Disc
Press STOP
digest playback
).
(
INTRO SCAN
Disc Track
You
Playback
you want by observing first
ture of 9EA of each section at one time on the TV
?
?
In
case
In
case
of audio CD, you can only hear
of VIDEO CD, you will also see
a
sound.
a scene.
can
locate the
This
screen.
be useful when you play
few tracks, such as a movie.
might
is divided into
1
point
a
a
pic-
disc which
Press NUMERIC button 3.
?
During playing
a
VIDEO CD
track into 9 sections and TV
pictures
,
the unit divides the
screen
shows still
of each section in order.
Current track
1
2
3
8
9
4
7
6
5
For your reference
To view sections of another track, press NEXT
such as Disc digest play.
2
Press NUMERIC buttons to select the
want.
The unit starts
playing
To cancel Disc track
Press STOP
18
point you
(
).
from the selected
play
point.
CD/VCD
Playback
Repeat Playback
Program Play Setup
NOTE: The repeat play does not work in PBC ON status of the VIDEO CD with PBC function (Version 2.0).
You
arrange the order of the tracks
create your own program. The program
can
the discs and
on
contain up
can
to 20 tracks.
To
play
track
one
Press REPEAT
-
play
otes
during playback.
appears in the display window.
"REPEAT 1"
To
repeatedly
once
disc
one
The program
of the VIDEO CD with PBC
"REPEAT 1
To
play
repeatedly
again during playback.
DISC" appears in the display
all tracks
Press REPEAT
-
"REPEAT ALL
1
all disc
window.
during playback.
DISC"appears in the display
window.
play
Press REPEAT several times until
"repeat
2
?
Press REPEAT
3
program play.
"REPEAT 1" appears in the display window.
(One track repeat)
once
Press D.SKIP
in
or
DISC DIRECT PLAY
(DISC1/2/3)
to select the disc.
during
again during program play.
"REPEAT ALL DISC"appears in the display
(All program repeat)
Use PREV./NEXT
window.
4
5
6
MULTI JOG SHUTTLE
or turn
to select the track.
In
Press REPEAT
-
control)
the
on
indicator"
Program repeat play
-
remote
(or PROGRAM
the Stop mode.
repeatedly
disappears.
?
Press PROG./MEMO
once more
To cancel repeat
-
on
function(Version 2.0).
This function is not available to MP3 discs.
Press REPEAT
-
does not work in PBC ON status
playback
case
of
using NUMERIC (0~9)button,
Press PROG./MEMO
remote
(or PROGRAM
the
on
control).
Repeat steps 1~5to select additional discs
and tracks.
Press PLAY
()
.
To check program contents
Press PROG./MEMO. (or PROGRAM
control) in Stop mode.
-
press "0" and "3".
on
A disc, track and program number will be
the remote
displayed.
To clear program contents
Press PROG. (or PROGRAM on the remote control)
stop mode. Then press CLEAR on the front panel or
STOP (
) on the remote control.
in
To add program contents
1.
Press PROG.
(or PROGRAM on the remote control) repeatedly in the program Stop mode until
"Disc Number" blinks.
2. Repeat steps
2~5as shown to the above.
To
modify program
1.
Use PROG.
to
display
contents
(or PROGRAM
on
the remote
program number you want to
2. Repeat steps
control)
modify.
2~5as shown to the above.
19
OPERATION
CD/VCD
MP3
1
Playback
Playback
Load
an
otes
The
directory
English.
MP3 disc.
The ROOT
directory
menu
is
displayed
on
the TV
during playback,
automatically.
FOLDER
ROOT
PAGE 01/ 01
TRACK_1
TRACK_3
TRACK_5
TRACK_7
TRACK_9
To
TRACK_2
TRACK_4
TRACK_6
TRACK_8
MP3 files that you want to
then press SELECT.
MP3 FILE
play
directory
are
where
?
located and
MUSIC_1
MUSIC_3
MUSIC_5
MUSIC_4
MUSIC_5
?
?
the disc.
TRACK_1
:
PAGE 01/ 02
MUSIC_1
MUSIC_3
MUSIC_5
MUSIC_4
MUSIC_5
4
Press PLAY
()
?
MUSIC_2
MUSIC_4
MUSIC_6
MUSIC_4
MUSIC_5
to start
For your reference
Press PREV./NEXT to
play
playback
the next file
of
or
a
file.
previous
file
during playback.
?
Press RETURN to
move
to the ROOT
directory during
playback.
20
in
by pressing PREV./NEXT
is played after 5 seconds
FOLDER
ROOT
PAGE 01/ 01
TRACK_1
TRACK_3
TRACK_5
TRACK_7
TRACK_9
TRACK_2
TRACK_4
TRACK_6
TRACK_8
:
If you press REPEAT
rent MP3 file will play
repeatedly
during playback,
repeatedly.
in the display window.
once
the
cur-
If you press REPEAT twice during playback, the all
MP3 files on the disc will play repeatedly.
"REPEAT 1 DISC" appears in the display window.
If you press REPEAT three times, the repeat play will
during playback.
Press PAUSE ( )
PLAY or PAUSE (
play
the next file
to enter the pause
) again
Press STOP
(
)
to
or
previous
file
mode, press
to return to normal
back.
Press PREV./NEXT to select the desired MP3 file
on
MP3 file
?
MUSIC_2
MUSIC_4
MUSIC_6
MUSIC_4
MUSIC_5
directory
an
For your reference
Press PREV./NEXT to
PAGE 01/ 02
MP3 FILE
only displayed
be cancelled.
TRACK_1
:
Play
"REPEAT 1" appears
?
Press PREV./NEXT to select the
of the selected
the file
is
:
?
3
name
If you select another file
screen.
2
and file
stop the playback.
play-
LM-VS1520/V1520/V1521
-
ALL ENG
KARAOKE
Karaoke Function
To
Adjust ECHO
play KARAOKE(singing along) with CD by connecting a microphone to the unit.
You can enjoy KARAOKE with a stereo-recorded disc,
even if it is a non-karaoke disc, by reducing the singer's
Yo u
can
You
can
give
microphone.
?
an
Press ECHO
Volume
echo effect to the sound from the
to
repeatedly
adjust
the
strength
of
echo.
voice.
ECHO-1, ECHO-2
ECHO-3 is
or
displayed
in the
display
window.
1
2
3
Press POWER to turn
on
the
player.
?To cancel it, set the echo indication
the display window.
Select the CD function.
Press CD
to open the disc
load a disc with the label side
OPEN/CLOSE(
compartment,
up.
In case of
)
a
Connect your microphone to the MIC jack.
Turn the MIC VOLUME knob to adjust the micro-
phone
volume.
Press FANFARE
(OPTIONAL)/SCORE
to enter
You
can
case
the
change
the
Key (KEY CONTROL)
key
of Video CD, "KARAOKE" appears in the
to find the
repeatedly
to suit your vocal range.
(b
key
KEY CON
-
-
#
)
buttons
that suits your vocal
range.
can
the
key to 15 steps (7 higher steps
the original key).
adjust
lower steps and
The setting appears
-
can
on
the
,
7
screen.
with Karaoke
Recording
You
the karaoke mode.
In
Change
You
it.
5
To
Press KEY CONTROL
VIDEO CD with PBC functions, "PBC"
appears in the display window. Press PBC to cancel
4
in
disappear
during playing KARAOKE.
"RECORDING" explanation section.
record
Refer to the
screen.
6 pressing
Select the desired track number
PREV./NEXT
on
(or turning
the disc
otes
by
MULTI JOG
SHUTTLE.
If
-
If you press the NUMERIC buttons, the
is started automatically.
Move the
occurs
microphone(s)
away from the TV
or
the
speakers.
playback
-
-
7
howling
Lower the volume of the TV
or
the mic volume.
Cancel ECHO function.
Press
PLAY(
).
Sing along with the accompaniment.
For your reference
To play the next, press PREV./NEXT
JOG SHUTTLE
If the sound is distorted when the unit is con-
nected
-
or
turn MULTI
TV
Cancel ECHO function.
If sound
again.
a
through
the
microphone
is
extremely
loud
it may be distorted. In this case turn the MIC
volume toward minimum and set to "ECHO OFF"
ote
Come out the Fanfare
If the track
(OPTIONAL)
& Score
by pressing ECHO.
is finished, the score will appear
on the screen, and if you take the score 70 points
and over the fanfare sound comes out. And the unit
will
playback
automatically
pause after
playing
back of each
track.
21
OPERATION
Selection
System
You
?
?
?
(NTSC/PAL)
enjoy NTSC or PAL discs by using the NTSC/PAL button to choose the appropriate system.
try to play back PAL disc with NTSC-TV. The unit will not play back the disc.
the system of your unit does not coincide with the system of your TV, normal color picture may not be displayed.
you play back NTSC disc with PAL-TV, some discs may produce black bands at the top and bottom of the screen.
can
If you
When
When
L.MEMORY T. SEARCH
b-KEY CON-#
MPX
ECHO
DISPLAY
Position of
Connected TV
Available disc
PAL
PAL
PAL VCD disc
NTSC
NTSC
NTSC VCD disc
MULTI system TV
NTSC/PAL disc
Select
FANFARE /
SCORE
DIGEST NTSC/PAL
NTSC/PAL
TAPE A
CD/
TAPE B
KARAOKE
TAPE
Disc
System
NTSC
or
PAL
This unit
Requirements
play back the following discs.
This equipment has been designed to play discs bearing the identification logo shown
CD: compact disc recorded only with digital audio signals.
VIDEO CD : compact disc recorded with compressed digital audio and video signals.
can
Contents
Disc mark
Video CD
Audio
addition, this unit
Notes
This
player
can
on
play
CD-R
a
Disc
or
74 minutes
8cm
20 minutes
12 cm
74 minutes
8cm
20 minutes
playback according
can
enjoy
to the discs
You
?
video
functions
disc)
Enjoy
pictures)
Play
as
MP3 files.
two
type.
?
can
Small
impact while video disc is playing
cause abnormality on pictures.
in
playback (moving
well
as
music.
interactive software
displayed
using
the
enormous
reproduces data
1/100 of regular disc,
on
its surface
influence
on
make the disc unuseful. Therefore,
much more care is required.
?Amosaic with faint checker pattern
appear on the pictures with many
PBC functions
TV screen, in addition to the
movements and detailed
video
this is not
discs)
playback
function of
can cause
even
menu screens
2.0
even a
video and audio and
VIDEO CD with
on
can
Because video disc
minor scratch
without PBC
or
CAUTION
VIDEO CD
(Version
Time
Video
CD-RW that contains audio titles
conforms to Version 1.1 and Version
Type
1.1
Playback
12 cm
compressed
(Version.
Maximum
Disc Size
VIDEO CD
2.0 of VIDEO CD standards. You
kinds of
below.
Audio
Audio CD
In
+
as
a
can
motion, however,
defect.
Version 1.1 discs.
otes
Discs should be kept clean at all times. -Stains, scratches and dust on disc's surface cause bad quality video and audio.
Never touch disc's surface.
Depending on the conditions of the recording equipment or the CD-R/RW disc itself, some CD-R/RW discs cannot
be played on the unit.
22
Troubleshooting
Check the
following guide
for the
possible
a
problem
before
No power.
?
picture.
?
Possible Solution
The power cord is disconnected.
?
The TV is not set to receive VCD
signal
?
output.
the power cord into
outlet securely..
Plug
Select the
on the TV
?T he video cable is not connected
?
securely.
There is
sound or
only a very low-level
sound is heard.
no
?
?
The
playback picture
is poor.
The unit does not start
?
?
The connected TV power is turned off.
The audio cables
or
noise is
?
not connected
are
The power of the equipment connected
with the audio cable is turned off.
The audio
cord is
connecting
The disc is
damaged.
dirty.
The disc is
?
on
jacks
the TV.
Insert the audio cable into the
?T urn
jacks
the external equipment
connected with the audio cable.
?
?
down.
placed upside
The disc is
The
screen.
securely.
?T he disc is not
Severe hum
heard.
the TV
Connect the video cables into the
?T urn
?
playback.
?
wall power
securely.
securely.
?
a
appropriate video input mode
so the picture from the unit
on
appears
?
service.
contacting
Cause
Symptom
No
of
cause
placed
within the
guide.
dirty.
and
plugs
?
?
jacks
are
on
Replace
it with
Clean the disc.
Place the disc with the
down.
playback
Place the disc on the disc tray
inside the guide.
side
correctly
Clean the disc.
?W ipe them with
dirty.
new one.
a
cloth
slightly
moistened
with alcohol.
?
?
?
The disc is
dirty.
?
The speakers and components
connected poorly.
The unit is located with TV
?
are
Clean the disc.
Connect the
speakers
and components
securely.
nearly.
?
Move your TV away from the audio
components.
Recording
cannot be
?
The components
are
?Connect the components
connected
correctly.
incorrectly.
done.
?
The
source
is selected
incorrectly.
?
Select the source with the FUNCTION
SELECT button (CD, TAPE, AUX or
TUNER).
Radio stations cannot
be tuned in.
?
The antennas
are
connected
poorly.
?
?
The remote control
does not work properly.
?
The signal strength of the stations is too
weak (when tuning in with automatic
Connect the antenna
securely.
the antennas and connect
external antenna if necessary.
Adjust
?T une in the station
an
manually.
tuning).
?T he remote control is not
pointed
at the
?P oint the remote control at the remote
remote sensor on the unit.
?
?
?
sensor on
The remote control is too far from the
unit.
There is an obstacle in the path of the
remote control and the unit.
The batteries in the remote control
exhausted.
are
?
?
?
the unit.
Operate the
23ft(7m).
remote control within about
Remove the obstacle.
Replace
the batteries with
new ones
23
REF NC
Specifications
LM-V1520A/S
MODEL
SECTION
LM-V1521A/S
Power
[Genral]
LM-VS1520A/S
Refer to the back
supply
panel
of the unit.
Power
consumption150W
Mass
10.5kg
External dimensions (W x H x D)
280 x 370 x 399 mm
40
18000 Hz
Frequency response
70 dB
Signal-to-noise ratio
70 dB
Dynamic range
87.5
108.0 MHz
Tuning Range
Intermediate Frequency
10.7 MHz
61/58 dB
Signal to Noise Ratio
200W
-
[CD]
-
FM
[Tuner]
(MW)
AM
SW (option)
[Amp]
60
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Output Power
522-1611kHzor530-1610kHz
T.H.D
0.15%
Frequency Response
Signal-to-noise ratio
Tape Speed
25
Wow Flutter
0.25%
-
450 kHz
35 dB
100
1900 Hz
-
5800
-
150W
-
P/NO
125
-
8000Hz
43dB
50dB(P/B)/45dB(R/P)
55dB (MTT-5511)
LMS-V1520V
LMS-V1521V
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
3828R-A074H
x
2Way 2Speaker
6Ω
6Ω
86 dB/W
Rated
H
are
x
(1m)
to
change
85 dB/W
(1m)
50W
300W
100W
7.0kg
subject
60-20000Hz
150W
240X370X313mm
D)
LMS-VS1520T
3Way 3Speaker
50-20000Hz
Sound Pressure Level
:
180W
+
(MTT -111, JIS-WTD)
120sec (C-60)
Type
Impedance
Frequency Response
specifications
180W
25000 Hz
MODEL
and
150W
4.75cm/sec
Erase Ratio
Designs
+
80 dB
Frequency Response
Signal to Noise Ratio
Channel Separation
[Speakrs]
18000 kHz
450 kHz
F.F/REW Time
[TAPE]
10000 Hz
Frequency Response
without notice.
210X362X236mm
4.8kg
Download PDF

advertising