LG | LM-D5938A | LG LM-D5938A Owner’s Manual

ABANS_LM-D5938A-ENG-29S
DVD MINI HOME THEATER SYSTEM
OWNER'S MANUAL
MODEL
:
LM-D5938
LM-D5938A/D/X, LMS-D5938V,
LMS-D5938C, LMS-D5938T, LMS-D5938U
VIDEO CD
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Designs
and
notice for
specifications
improvement.
are
subject
to
change
without
Safety
Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
a
risk of electric
shock to persons.
The exclamation
point
is intended to alert the
important operating
within
user
an
equilateral triangle
to the presence of
and maintenance
instructions in the literature
(servicing)
accompanying the
appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION:
This
To
Digital
ensure
Video Disc
proper
use
Player employs
of this
a
Laser
product, please
System.
read this owner's
manual
carefully and retain for future reference, should the unit
require maintenance, contact an authorized service locationsee service procedure.
Use of
controls, adjustments
other than those
specified
or
the
performance
of
procedures
herein may result in hazardous
radiation exposure.
prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus shall not be exposed to water,
dripping or splashing and that no objects filled with liquids,
as
vases, shall be
on
copyrights:
by
law to copy, broadcast, show, broadcast
via cable,
To
such
Notes
It is forbidden
placed
on
the
apparatus.
play in public, or rent copyright material without
permission.
This product is equipped with copy protection measures
developed by Macrovision. Copy protection signals are recorded on some discs. When recording these discs on a VCR,
picture noise will appear during playback.
This product incorporates copyright protection technology that
is protected by certain U.S. patent claims and other intellectual
property rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection technology must
be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
SERIAL NUMBER: The serial number is found
on
the back of
this unit. This number is
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
2
___________________________________
___________________________________
to
Ta ble of Contents
SafetyPrecautions...............................2
.24-26
OperationwithDVDandVideoCD
PlayingaDVDandVideoCD....................24
TableofContents................................3
GeneralFeatures..........................24-26
BeforeUse...................................4-5
PlayableDiscs................................4
MovingtoanotherTITLE....................24
.24
MovingtoanotherCHAPTER/TRACK.
Precautions..................................5
Search.................................24
Introduction
.
NotesonDiscs...............................5
AboutSymbols...............................5
FrontPanelandRearPanel........................6
RemoteControl.................................7
DisplayWindow.................................8
Connections.................................9-12
9
Connecting to External Equipment or Antenna
ConnectingtoaTV...........................10
.11
ConnectingtoOptionalEquipment
SpeakerSystemConnection....................12
BeforeOperation.............................13-20
AudioAdjustment.............................13
SpeakerPositioning........................13
VolumeAdjustment........................13
SoundQualityAdjustment...................13
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Still Picture and
.
.
.
.
.
.
Frame-by-Frame Playback
.
.
.
.
.
.
.
.
.
.
.
25
SlowMotion.............................25
Repeat.................................25
RepeatA-B..............................25
TimeSearch.............................25
LastConditionMemory.....................25
(Extreme Dynamic
Sound
System)
.
.
.
.
.
Zoom..................................26
MarkerSearch...........................26
SpecialDVDFeatures.........................26
TitleMenu...............................26
.
SURROUND.............................13
.
.
13
DEMOMode.............................13
SPECTRUMEffect........................13
Glossary
.
.
MUTE..................................13
Mini
.
3DSurround.............................25
Preparation
XDSS
.
for Audio Stream & Surround Mode
.
14
SoundMode.............................14
SettingtheClock..........................15
SleepTimerFunction......................15
UsingMicrophone-OPTIONAL...............15
TimerFunction...........................16
GeneralExplanation..........................17
On-ScreenDisplay............................17
InitialSettings.............................18-20
GeneralOperation.........................18
Language...............................18
Picture.................................18
SpeakerSetup...........................19
Others..................................19
ParentalControl..........................20
Operation
DiscMenu...............................26
CameraAngle............................26
ChangingtheAudioLanguage................26
ChangingtheAudioChannel.................26
Subtitle.................................26
27-28
Operation with Audio CD and MP3/WMA Disc
.27
PlayinganAudioCDandMP3/WMADisc
NotesonMP3/WMARecordings.................27
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Pause..................................28
MovingtoanotherTrack....................28
RepeatTrack/All/Off.......................28
Search.................................28
RepeatA-B..............................28
ChangingtheAudioChannel.................28
OperationwithJPEGDisc.......................29
ViewingaJPEGdisc..........................29
MovingtoanotherFile......................29
StillPicture..............................29
Toflipthepicture..........................29
Torotatepicture..........................29
NotesonJPEGRecordings..................29
ProgrammedPlayback..........................30
30
Programmed Playback with Audio CD and Video CD
30
Programmed Playback with MP3/WMA Disc
RepeatProgrammedTracks..................30
.30
ErasingaTrackfromProgramList.
.30
ErasingtheCompleteProgramList.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Reference
OperationwithRADIO........................21-22
Presettingtheradiostations.....................21
Listeningtotheradio..........................21
AdditionalInformation..........................31
RDSFunction-OPTIONAL.....................22
AboutActiveSubwoofer........................31
AboutRDS..............................22
Troubleshooting................................32
LanguageCodeList.............................33
CountryCodeList..............................34
Specifications.................................35
ProgrammeSearch(PTY)...................22
OperationwithTAPE............................23
BasicPlayback..............................23
ToStopPlay................................23
TapeCounterReset..........................23
ToPlayRewindorFastForward..................23
Dubbing....................................23
Recording....................................23
BasicSetting................................23
23
Recording from Radio, CD or Auxiliary source
.23
CDtoTapeSynchronizedRecording.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ListeningtotheSubWoofer-OPTIONAL.
About the
symbols
Indicates hazards
other material
likely
damage.
.
.
.
.
.
.
.
.
.
.31
for instructions
to
Indicates
special operating
Indicates
tips
cause
harm to the unit itself
features of this unit.
.
and hints for
making
the task easier.
or
INTRODUC
Before Use
Playable
Discs
ote
When
DVD
on
DTS-encoded CDs
DTS-encoded
playing
CDs, excessive audio level
may be heard from the analog stereo output. To avoid
possible damage to the audio system, turn down the
(8cm/12cmdisc)
volume before
playing back such discs, adjust the volgradually, and keep the volume level low. To enjoy
DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be
connected to the digital output of the unit.
Video CD
(VCD)
(8cm/12cmdisc)
ume
Audio CD
(8cm/12cmdisc)
In
addition, this unit can play a DVD-R, DVD±RW,
CD, SVCD, and CD-R or CD-RW that
contains audio titles, MP3, WMA or JPEG files.
Kodak PICTURE
Disc-related terms
Title
(DVD only)
The main film content
or
accompanying
feature content
additional feature content, or music album.
Each title is assigned a title reference number
or
Notes
--
--
--
Depending
the conditions of the
recording equipment or the CD-R/RW (or DVD-R/±RW) disc itself,
some CD-R/RW (or DVD-R/±RW) discs cannot be
played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
on
you to locate it
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
Track
Notes
on
(Video
Sections of
DVDs and Video CDs
or an
be
enabling
back features of the unit may not be available
functions may be added.
Refer also to the instructions
supplied
or
other
a
CD and audio CD
picture
with the DVDs
code of the DVD player and DVDs
player is designed and manufactured for playregion "5" encoded DVD software. The region
only)
piece on a video CD
assigned a track number,
musical
you to locate the track you want.
Scene
On
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
or a
audio CD. Each track is
Some
playback operations of DVDs and Video CDs may
intentionally fixed by software manufacturers. As this
unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some play-
enabling
easily.
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
Regional
This DVD
Types
back of
There
code
which
unit
on
the labels of
type of player
some
can
try
two
DVD discs indicates
play
those discs. This
5
play only DVD discs labeled "5" or "ALL".
to play any other discs, the message "Check
Regional Code" will appear on the TV screen. Some DVD
discs may not have a region code label even though their
playback is prohibited by area limits.
can
If you
of video CDs
are
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
PBC
with the
system via
menus, search
functions,
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
still
other
pictures
included in
the disc.
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Video CDs not
Before Use
(Cont'd)
Storing
Precautions
After
the unit
Handling
discs
playing,
store the disc in its
case.
When
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
The
light,
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a
nearby TV, VCR, or radio
during playback. In this case, position
may be distorted
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
near
or
radio,
or
turn off the
volatile
such
liquids,
as
the unit. Do not leave rubber
leave marks
on
a
long period
ter out.
plastic products in
of time. They will
the surface.
soft, dry cloth. If the surfaces
soft cloth
solution. Do not
benzine,
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
insecticide spray,
or
To clean the cabinet
a
discs
the unit
Cleaning
use a
Cleaning
temperature
the exterior surfaces clean
use
contact with the unit for
Use
as there may be a considerable
increase inside the car.
or
use
thinner,
are
moistened with
lightly
strong
as
a
extremely dirty,
mild detergent
solvents such
these
as
might damage
alcohol,
the surface
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
About
records.
vinyl
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Handling
on
playback side of the disc.
by the edges so that fingerprints
VCD1.1
Do not touch the
get
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
discs
Hold the disc
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG disc.
5
INTRODUC
Front Panel and Rear Panel
17
16
15
14
13
7654321
27
18
AM
19
GND
FM
26
12
11
10
8
25
20
24
21
9
23
22
AM
GND
FM
1.
POWER
2.
DISC DIRECT PLAY buttons
3.
?
?
(
STANDBY/ON)
10. Z PUSH EJECT
button
position (TAPE 2)
(MIC1, MIC2) : OPTIONAL
VOLUME KNOB (MIC VOL.) : OPTIONAL
11. MIC JACKS
DISC SKIP button
(DISC1, DISC2, DISC3)
(DISC SKIP)
EQUALIZER
button
13. VOLUME knob
(EQ)
12. MIC
4.
FUNCTION SELECT buttons
14. CD OPEN/CLOSE button
15.
5.
(TUNER, TAPE, DVD/CD, AUX)
MULTI JOG DIAL/ SKIP (-/+)
6.
HEADPHONE SOCKET
7.
Z PUSH EJECT
8.
?
(
PHONES)
position (TAPE 1)
REWIND/ FAST FORWARD
6.3mm
-
CD SEARCH
?
TUNING DOWN/UP buttons
?
PRESET DOWN/UP buttons
?
REVERSE PLAY
?S TOP
?
9.
?
?
(FF/GG)
(xSTOP)/
(
:
19. VIDEO OUT Jack
21. VOLTAGE SELECTOR
/
(
optional)/
22.
)
PLAY
(
)
button
(z/[])
25. CENTER SPEAKER Connector
button
26. AUXILIARY INPUT Sockets
TIMER button
PROGRAM/MEMORY
?
MODE/RIF button
?
CD PAUSE
?
COUNTER RESET
(PROG./MEMO)
button
SET button
(COUNT.RESET)
button
:
OPTIONAL
RDS button
SURROUND
?
?
6
:
OPTIONAL
(SURR.) button
(NOR-DUBB)/
CD SYNCHRO RECORDING (CD SYNC.) button
HIGH DUBBING (HI-DUBB)/ REPEAT button
NORMAL DUBBING
?
PLAY MODE button
?
DEMO button
:
OPTIONAL
OPTIONAL
23. SPEAKER Connector
27. ANTENNA Terminal
?
:
POWER CORD
24. SUB WOOFER OUT Connector
CLOCK button
?
Window
20. OPTICAL OUT Jack
buttons
RECORD/ RECORD PAUSE
?
Remote Sensor
Display
18. S-VIDEO OUT Jack
(FF/GG)
CLEAR button
(CD[])/
XDSS button
?
17. CD door
buttons
?
16.
?
(AUX IN)
Remote Control
1
1.
POWER button
2.
NUMERIC buttons
3.
FUNCTION SELECT buttons
4.
TAPE 1/2 SELECT buttons
5.
XDSS button
6.
TAPE FUNCTION buttons
20
2
(TUNER, TAPE, DVD/CD, AUX)
-
3
19
54
-
-
18
-
-
17
6
REWIND/ FAST FORWARD PLAY
PLAY
REVERSE PLAY
STOP
8
15
SPECTRUM button
8.
ARROW buttons
use
in
a
9.
SELECT/ENTER button
10.
?
(Use
10
?
(z/[])
selection
GUI
on a
menu
screen.)
TITLE button
the TITLE button to
included
11
highlighting
screen, TITLE and MENU
9
14
(F: optional)
(x)
RECORD/ RECORD PAUSE
(For
INTRODUC
(FF/GG)
(G)
7.
16
7
(0-9)
DVD video
on
the title
display
discs.)
screen
SUBTITLE button
11. ANGLE/ ZOOM/
REPEAT(A-B)/
CLEAR buttons
buttons
12.
SLOW(F]/]G)/SCAN(REV./FWD)
13.
MARKER/ SEARCH/ SLEEP buttons
14. VOLUME -/+ buttons
13
12
15.
?
?
DISPLAY/ RETURN/ SET UP buttons
MENU button
(Use
the MENU button to
screen
included
on
display the menu
discs.)
DVD video
SOUND/ AUDIO/ ECHO buttons
16.
EQUALIZER
17.
DVD/CD CONTROL buttons
-
-
-
-
(EQ)/
PLAY/SELECT
SKIP/PREV.
(
(G), PAUSE([])/ STEP,
),
SKIP/NEXT
(
STOP
(x)
)
PROGRAM
REPEAT, DISC SKIP (D.SKIP)
SKIP
/: Press and hold button for about
two seconds for search function.
18. SURROUND
Remote Control
sensor
20.
MUTE button
Remote control
Operation Range
Point the remote control at the remote
PRESET
buttons
battery
and press
remote
Angle:
remote
installation
Detach the
the buttons.
Distance: About 23 ft
button
(SURR.)
(D/E)
19.
the
(7 m)
from the front of the
rear
battery
and insert two R03
AAA) batteries with
aligned correctly.
sensor
About 30° in each direction of the front of the
cover on
of the remote
control,
(size
and
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
Display Window
2
1
3
MOVIE
MUSIC
MP3
123
C
L
DVD
R
ll
CD
SUB
VCD
TITLE
123456
REC
CHP/TRK
1
ALL DISC
MONO
MEMO
DOWNMIX
LS
RS
S
8
789101112
kHZ
131415
D
MHZ
OVER
PROG.
1
7
HI
-
A-B
DTS
PL
XDSS
PBC
2
SPEED
4
SURR.
SLEEP
1/L2/R
DUBBING
CD SYNCHRO
5
ECHO
RDS PS PTY RT
6
1.
2.
3.
8
?
DISC indicator
?
?
DOLBY DIGITAL/ PRO LOGIC
DISC NUMBER indicator
?
SURROUND indicator
?
PLAY/ PAUSE indicator
?
REPEAT A-B/ ANGLE indicator
?
PROGRAM/ SLEEP/ XDSS indicator
MUTE/ PBC indicator
4.
?
TITLE indicator
?
TIMER indicator
?
?
CHAPTER/ TRACK indicator
?
ECHO indicator
?
REPEAT indicator
?
MIC indicator
?
FM STEREO RECEIVING indicator
?
RDS indicator
?
MONO indicator
?
MEMORY
?
DOWNMIX indicator
?
LEFT FRONT SPEAKER indicator
?
RIGHT FRONT SPEAKER indicator
?
RIGHT SURROUND SPEAKER indicator
?
LEFT SURROUND SPEAKER indicator
?
SUB WOOFER indicator
?
CENTER SPEAKER indicator
(C)
?
SURROUND MODE indicator
(S)
(MEMO)
5.
indicator
(SUB)
LEVEL indicator
7.
?
(L)
(R)
(RS)
(LS)
8.
indicator
(SURR.)
OPTIONAL
:
6.
( )
:
OPTIONAL
TAPE 1/2 SELECT indicator
?
PLAY MODE indicator
?
DUBBING indicator
?
CD SYNCHRO RECORDING indicator
?
CD MUSIC CALENDAR indicator
?
CD MUSIC CALENDAR OVER indicator
Connections
Connecting
?
to External
Equipment
or
Antenna
Connect the AUX IN
AUDIO OUT
using
(L/R) jacks on the unit to the
(L/R) jacks on the VCR, LD player, etc
the audio cables.
?
Connect the
ing
-
supplied FM/AM(MW)
antennas for listen-
to the radio.
Connect the
AM(MW) loop
antenna to the
AM(MW)
antenna connector.
otes
-
To
prevent noise pickup, keep the AM(MW) loop
antenna away from the unit and other component.
Be
fully extend the FM wire antenna.
connecting the FM wire antenna, keep it
izontal as possible.
sure
INTRODUC
Connect the FM wire antenna to the FM antenna
connector.
to
After
hor-
as
ip
Press AUX to select
"AUX" appears
on
input to these jacks.
display window.
the
AM
GND
FM
Rear of VCR
(or
LD
player, etc)
AM
AUDIO OUT
GND
L
R
FM
9
Connections
to a TV
Connecting
AM
GND
FM
AM
GND
FM
If the TV has
S-VIDEO
an
connect the unit
input,
with S-VIDEO cable.
Make
the
one
of the
capabilities
Tips
Depending
to
following connections, depending
existing equipment.
on
otes
of your
The
your TV and other equipment you wish
are various ways you could connect
on
connect, there
the
player.
Use
one
of the connections described
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
System
best connections.
Caution
Make
sure
unit is connected
the correct AV
directly
to the TV. Select
your TV.
Do not connect your unit to TV via your VCR. The picture image could be distorted by the copy protection
--
input
on
system.
Video connection
Connect the VIDEO OUT
IN
the TV
jack
supplied (V).
on
using
jack
on
the unit to the VIDEO
the video cable
S-Video connection
Connect the S-VIDEO OUT
VIDEO IN
cable
10
(S).
of S-VIDEO OUT
jack
will
output only
jack
on
the TV
jack on the the unit to the
using the optional S-Video
When you connect the unit to your TV, be sure to turn
off the power and unplug both units from the wall outlet before
below.
--
signal
when the function mode is selected to CD/DVD.
S-
making
any connections.
Connections
Connecting
to
Optional Equipment
PREATION
AM
GND
FM
AM
GND
FM
Connecting to an amplifier equipped with two
digital stereo (PCM) or to an Audio/ Video
receiver equipped with a multi-channel decoder
(Dolby DigitalTM, MPEG 2 or DTS)
Notes
channel
Connect the OPTICAL OUT jack
CAL IN
jack
on
your
amplifier.
on
Use
the unit to the OPTI-
an
optional
audio
cable.
--
If the audio format of the
the
capabilities
duce
--
strong,
a
digital output
does not match
of your unit, the DVD Karaoke will prodistorted sound or no sound at all.
Six Channel
Digital Surround Sound via digital cononly be obtained if your unitr is equipped
Digital Multi-channel decoder.
nection
with
--To
a
see
Screen
can
the audio format of the current unit in the On-
Display,
press AUDIO.
Caution:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
The sound is muted
during playback
on an
audio CD
recorded in dts.
11
Connections
Speaker System
Connect the
Connection
speakers using the supplied speaker cords by matching the colors of the terminals and those
possible surround sound, adjust the speaker parameters (distance, level, etc.).
of the
cords. To obtain the best
Front
Front
Speaker (Left)
Speaker (Right)
AM
GND
FM
Center
Speaker
AM
GND
FM
Rear Speaker
Speaker
(Left Surround) (Right Surround)
Rear
Active Sub Woofer
If you feel lack of bass frequency
Connect an active sub woofer to the SUB WOOFER OUT connector
using
a
monaural audio cord
(not supplied).
otes
Be
are
sure
to match the
reversed,
speaker
cord to the
appropriate
If you use front speakers with low maximum
on the speakers.
12
terminal
on
the
components:
+
to
+
and
--
to
--.
If the cords
the sound will be distorted and will lack base.
input rating, adjust
the volume
carefully
to avoid excessive
output
Before
Audio
Operation
Adjustment
Speaker Positioning
Volume
In the
?Turn
of normal
position use the 6 speakers (2
front speakers, center speaker, 2 rear speakers and
subwoofer).
If you want to play the excellent bass sound or Dolby
Digital surround, you should connect a subwoofer.
case
level,
?
?To
height.
But
speakers
normally place it
and front
speakers
above
below the
or
are
speakers
Place left and right behind the listening area.
These speakers recreate sound motion and atmosphere
required for surround playback. For best results, do not
install the rear speakers too far behind the listening position
or
above the level of the listener's
is also effective to direct the
to further
ceiling
In the
the
of
case
rear
set the
a
smaller
rear
room
rear
speakers
speakers
towards
a
ears.
wall
above 60-90cm than the listener's
can
be
or use
choose between 4 fixed sound
desired sound mode
using
impressions.
the EQUALIZER
FLAT
:
Linear
ROCK
:
More
POP
:
CLASSIC
:
Headphone
a
frequency
response
bass, more treble
Less bass, less treble
For orchestral music
Jack
stereo
headphone plug ( 6.3mm)
into the
headphone jack.
speakers are automatically disconnected
you plug in the headphones (not supplied).
It
The
when
MUTE
Press MUTE to turn off the
sound, press again
to
restore.
Subwoofer
This
a
Connect
or
size, if the audience is near to
each other, and
speakers opposite
ears.
?
?
the sound.
disperse
wall set the
rear
level,
the remote control.
(EQ).
Rear
and install them at
on
Quality Adjustment
can
Select
television.
?
to increase the sound
+
to decrease it
-
activate stereo sound
You
speaker
It is ideal that the center
same
counterclockwise to decrease it.
Sound
r ont speakers
According to your listening position set up the speakers for
equal distance. And by hearing position set up the interval
between speakers to 45 degree.
Center
or
Press VOLUME
VOLUME
?F
?
Adjustment
VOLUME knob clockwise to increase the sound
placed
in any front
You
position.
the
Subwoofer
Front
mute your unit in
"
"
order, for example,
indicator flashes in the
to
answer
display
window.
Center
Speaker
(Left)
can
telephone,
Speaker
SURROUND
Front
Speaker
(Right)
To activate surround mode
Rear
Rear
You
Speaker
(Left)
Speaker
(Right)
Press SURROUND
can
choose
one
SURROUND ON
XDSS
between 2 fixed sound
(SURR.)
impressions.
button.
SURROUND OFF
(Extreme Dynamic Sound System)
Press XDSS to reinforce treble and bass.
The "XDSS ON" indicator lights up.
To cancel it press XDSS again.
The "XDSS OFF" indicator lights up.
-
Speaker Positioning Example
-
DEMO Mode
With the unit
for
a
plugged
in but turned
continuous visual
again
to return to
a
off, press the DEMO
display of units features.
display of the current time.
Press it
SPECTRUM Effect
Whenever you press the SPECTRUM button on the
remote control, you can enjoy the spectrum change
with 8
types in the display.
13
PREATION
Before
Mini
Operation
Glossary
for Audio Stream &
Sound Mode
Surround mode
BYPASS
You
Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD and com-
pact discs, etc.bearing the trademark. DTS Digital Surround delivup to 6 channels of transparent audio(which means identical to
ers
the
original masters) and results in exceptional clarity throughout a
true 360 degree sound field. The term DTS is a trademark of DTS
Technology, LLC. Manufactured under license from DTS
Technology, LLC.
DVD
VCD2.0
MOVIE
PROL
VCD1.1
MUSIC
CD
3D SUR
MTRX
enjoy surround sound simply by selecting one
pre-programmed sound fields according to the
can
of the
program you want to listen to.
Press SOUND
until the sound mode
repeatedly
you want appears on the TV screen as below.
When DVD is inserted
You
The
Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital program
"
"
If you play DVDs with
mark, you can enjoy even
better sound quality, greater spatial accuracy, and improved
source.
dynamic
can change the Digital Audio Output mode by
pressing the AUDIO button on the remote control during
playback.Although the DVD contents differ from disc to
disc, the following explains the basic operation when
this feature is used.
range.
Use this mode when
which carries the
being in
intensity
playing
"
"
movie theatre
a
which
movie
Dolby Digital 2
provides the
or
mark. This mode
or
channel
BYPASS
effect of
PL2 MATRIX
live concert house-an effect with
can
only
be obtained
(II)
Pro
Logic
two-channel
PRO LOGIC
→
This is done
sources.
using
an
matrix surround decoder that extracts the
without
adding
any
new
output channels from
advanced, high-purity
spatial properties
sounds
or
→
PL2 MOVIE
of the
or)
D
D
2CH
2CH
→
PL2 MUSIC
4 ENG
1 ENG
If you select 5.1 channel (For
by pressing AUDIO button
b)
→
3D SURROUND→ BYPASS...
"BYPASS" indicator will
When Video CD
II creates five full-bandwidth
original recording
→
example
an
through DOLBY PRO LOGIC
SURROUND. The effect of the front/back/left/right movement of the
sound image, as well as the sense of fixed position in the sound
image, is much clearer and more dynamic than before.
Dolby
3 ENG
2 ENG
If you select 2 channel (For
by pressing AUDIO button
a)
or
only
be
example
displayed
D
5.1 CH
on
the
or)
DTS
5.1 CH
screen.
Audio CD is inserted
Each time you press AUDIO button, the sound mode of
DVD is changed as the following order;
tonal col-
If you select the
AUDIO button
a)
orations.
of audio channel
STER.
by pressing
MOVIE mode:
use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the quality of discrete 5.1-chan-
BYPASS
The Movie mode is for
nel sound.
with any stereo music recordings, and
sound space. The Music mode includes
controls that allow the sound to be tailored to individual listening
provides
a
wide and
PRO LOGIC
→
→
LEFT
"BYPASS" indicator will
use
PL2 MOVIE
3D SURROUND
If you select the
pressing AUDIO button
b)
MUSIC mode:
The Music mode is for
→
PL2 MATRIX
be
→
PL2 MUSIC
→
BYPASS...
of audio channel
RIGHT
or
only
→
displayed
on
the
by
screen.
deep
For your reference
tastes.
?
MATRIX mode:
The unit memorizes the last mode
settings for
individually.
You can identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labelled with the
logo.
Dolby Surround encoded programs are labelled with
the
logo.
DTS Digital Surround discs are marked with DTS.
each
The Matrix mode is the
the Music mode except that the
logic is turned off. It may be used to
enhance mono signals by making them seem "larger." The Matrix
mode may also find use in auto systems, where the fluctuations
from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate "cure" for poor FM
stereo reception may be simply to force the audio to mono.
same as
directional enhancement
?
source
-
-
-
3D SURROUND
This unit
can produce a 3D Surround effect, using 3D Surround
technology, which simulates multi-channel audio playback
from two conventional stereo speakers instead of the five or more
speakers normally required to listen to multi-channel audio from a
Sound
home theatre. This feature works with DVD discs encoded with
Dolby
Pro
Logic
and
Dolby Digital
audio tracks.
BYPASS
Software with multichannel surround audio
according
14
to the way it
was
recorded.
signals
is
played
otes
When you
cy, the
play
sound tracks with 96kHz
output signals will be converted
sampling frequen(sampling
to 48kHz
frequency).
Sound Mode is not
applicable
when
headphone
is used.
Before
Setting
1
Operation
the Clock
Using Microphone
You
Press CLOCK.
(If
the clock
for
-
more
requires setting,
seconds.)
display begins to
press and hold CLOCK
can sing to a music
microphone to the unit.
than 2
The hours
Select either the 12 hour
2. cycle by turning
blink.
cycle
or
the 24 hour
Connect your
MIC socket.
1
""
MULTI JOG DIAL.
2
(12HR)
3
4
5
6.
3
(24HR)
or
Press SET to confirm the selected hour
Press SET and the correct time is shown
on
Press CLOCK at any time to show the time
display, for about 5 seconds.
Sleep Timer
sleep timer is set, the unit automatically
the specified time has elapsed.
specify
the time
delay
display
window you
about 5 seconds. This
off
on
automatically
turns
the
for
can see
that the
system
turns
pressed the time interval
by 10 minutes. i.e.
time until the power is
turned off.
sleep function is active press
briefly. The time remaining until the unit
displayed for about 5 seconds.
SLEEP
While the
turns off is
ote
If you press SLEEP while the
the SLEEP time is reset.
To cancel
sleep
time is
displayed,
Sleep Timer setting
If you wish to stop the function, press the SLEEP button
repeatedly until "SLEEP 10 appears, and then press
"
SLEEP
display.
once
or
microphone,
set the MIC volume
turn off the MIC and
remove
again
Adjust ECHO Volume
You
Press the ECHO
echo effect to the sound from the
repeatedly.
ECHO-OFF→ECHO-1→ECHO-2 →ECHO-3
after 90 minutes.
remaining
To
can give an
microphones.
80...70... etc. Select the desired time to turn off.
c heck
the
after "SLEEP 10
"
shows
on
the
may be distorted. In this case, turn the MIC volume
control toward minimum.
before the power is
means
Each time the button is
2
using
microphone from the MIC socket.
If the microphone is set too near the speaker, a
howling sound may be produced. In this case, move
the microphone away from the speaker or decrease
the sound level by using the MIC volume control.
If sound through the microphone is extremely loud, it
the
before it turns off is reduced
To
using microphone.
"Recording" explanation section.
knob to minimum
turned off, press SLEEP.
In the
MIC
Function
When the
To
PREATION
window.
otes
Use MULTI JOG DIAL to set current minutes.
off after
display
to the
For your reference
can record during
When not
the
a
microphone (not supplied)
Sing along with the accompaniment.
Adjust the microphone volume by turning
You
Press SET.
8
by connecting
music you want.
Refer to the
display.
source
will be shown in the
a
OPTIONAL
VOLUME KNOB.
cycle.
Use MULTI JOG DIAL to set the current hour.
7
1
Play
-
the
Before
Operation
Timer Function
With the TIMER function you can have the radio reception
and recording, CD or tape playing turned on and off at
6
the time desired.
1
7
Press CLOCK to check the current time.
8
For your reference
If you don't set
2
Press
setting mode.
display window in
turn.
previous
press and hold the
memorized TIMER
TIMER button
more
than
2 seconds.
-
The
previous
""
3
4
memorized timer
indicators appear in the
setting
for On Time and
display.
Press SET when the desired function flashes.
1.
a.
When you select TUNER
function,
'PLAY' and 'REC' indicator flash in
the
MULTI JOG
turning
Press SET to confirm the turn
on
minutes
time.
disappears.
Set the turn off hour time
9
10
11
12
13
14
turning
MULTI JOG
display
window
alternately
Press SET.
Set the turn off minutes
'PLAY' indicator
:
TUNER
'REC' indicator
:
TUNER
b. Select the
previous
memorized preset
on the front
number with MULTI JOG DIAL
and press SET.
'ON TIME' indicator appears for about 0.5
panel
seconds in the
display
window and then
disappears.
2. When you select CD or TAPE function,
'ON TIME' indicator appears for about 0.5
seconds in the
display
window and then
disappears.
Set the turn
on
hour
turning
MULTI JOG DIAL.
MULTI JOG
turning
MULTI JOG
Press SET.
Adjust
the volume level
DIAL.
Press SET.
""
for
play only
play and recording
turning
DIAL.
appear in the display window and the timer
has been completed.
setting
about 3 seconds.
5
minutes time
DIAL.
DIAL.
For your reference
If you want to correct the
setting,
on
hour time.
seconds in the
TIMER to enter the timer
TUNER-CD-TAPE flash in the
Set the turn
on
'OFF TIME' indicator appears for about 0.5
display window and then
timer function doesn't work.
clock,
Press SET to confirm the turn
Turn the
15
system off.
The selected timer functions
switched
To cancel
or
TIMER button is
select the timer set
setting
To activate
button
are
automatically
preset times.
check the timer
Each time the
timer
and off at the
on
or
cancel. You
pressed
can
you can
also check the
status.
or
check the
repeatedly
so
timer, press the
that
"
"
TIMER
appears in the
display
window.
To cancel the
TIMER, press the
repeatedly
that
window.
so
"
"
disappears
TIMER button
from the
display
Before
General
This manual
Operation
Temporary
Explanation
basic instructions for operating the
require specific operation or allow
only limited operation during playback. When this
occurs, the symbol
appears on the TV screen, indithat
the
cating
operation is not permitted by the Unit or
gives
TITLE
Unit. Some DVDs
is not available
screen.
playback
status
be
Repeat
Title
Repeat Chapter
Repeat
Track
Repeat
All Tracks
Repeat
A-B
Repeat
Off
Resume
displayed on the TV
changed on the menu.
can
can
OFF
be
Action
display operation
Press DISPLAY
1
AB
Display
Some items
On-screen
ALL
the disc.
on
On-Screen
General
CHAPT
TRACK
Feedback Field Icons
play
(non-PBC
(non-PBC
from this
prohibited
Video CDs
or
only)
Video CDs
only)
point
not available
Notes
during playback.
Some discs may not
provide all of the features on the
display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
on-screen
Press 3/4 to select
an
2
The selected item will be
3
The number buttons
Press 1/2 to
numbers
change
(e.g.,
title
item.
highlighted.
the
can
setting
of
an
item.
be also be used for
number).
For
some
press SELECT/ENTER to execute the
setting
functions,
setting.
DVD
Items
Function (Press 3/4 to select desired item)
Shows the current title number and total number of
Title Number
1/3
Chapter
Number
1 /12
Time search
0:20:09
1 ENG
Audio
language
Digital Audio
Output mode
D
and
Subtitle
language
Angle
ABC
OFF
1/1
Sound
VCD2.0
5.1 CH
BYPASS
to the desired title number.
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
Shows the elapsed playing time, and
searches the
point by
the
elapsed
time
directly.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes
the
setting.
Shows the current subtitles language, and
changes
the
setting.
1 /2,or
Numbers, SELECT/ENTER
1 /2,or
Numbers, SELECT/ENTER
Numbers, SELECT/ENTER
1
1
1
Shows the current sound mode, and
1
the
setting.
/2,or
SUBTITLE
Shows the current angle number and total number of
angles, and changes the angle number.
changes
/2,or
AUDIO
/2,or
ANGLE
/2,or
SOUND
VCD1.1
Items
Function (Press 3/4 to select desired item)
Track Number
1/4
Time
0:20:09
Shows the current track number, total number of tracks
and PBC On mode, and skip to the desired track number.
Shows the elapsed playing time (Display only)
Shows the audio channel, and
Audio Channel
STER.
Sound
titles, and skips
Selection Method
BYPASS
changes
the audio channel.
Shows the current sound mode, and
changes
the
setting.
Selection Method
1/2,or
Numbers, SELECT/ENTER
--
1/2,or
AUDIO
1/2,or
SOUND
17
PREATION
Before
Initial
You
can
Operation
Language
Settings
set your
Personal Preferences
own
on
the unit.
Disc
Language
Select
General
1
Operation
setup
Menu, Audio, and
Subtitle.
original language set for the disc is selected.
language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 33. If you enter the wrong language
Original
Press SETUP.
The
DVD
for the disc's
language
a
:
The
Other :To select another
menu
appears.
code, press CLEAR.
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
Spanish
Code
Italian
Aspect
Menu
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
Chinese
Language
Disc Audio
TV
Polish
Spanish
Code
Italian
Aspect
Menu
Chinese
Language
Hungarian
5.1
Polish
Hungarian
Speaker Setup
Others
5.1
Speaker Setup
Others
2
Press 3/4 to select the desired item.
The
screen
selected
will show the current
item,
as
well
as
setting for the
setting(s).
alternate
Menu
Select
you
3
While the desired item is
selected, press 2, then
3/4 to select the desired
setting.
4
Press SELECT/ENTER to confirm your selection.
Some items require additional steps.
Language
language
a
see
for the
5 setup
SETUP, RETURN,
or
menu.
Disc Audio
English
Disc Subtitle
Spanish
Disc Menu
French
Rating
German
Country
TV
This is the
menu
Italian
Code
Aspect
Menu
Press
setup
when you press SETUP.
Language
PLAY to exit the
menu.
5.1
Speaker Setup
Others
Picture
TV
Aspect
DVD
4:3 Letterbox: Select when
nected.
Displays
a
standard 4:3 TV is
theatrical
above and below the
images
picture.
4:3 Panscan: Select when
a
with
masking
con-
bars
conventional TV set is
connected. The video material formatted in the Pan &
Scan
style
picture are
is
played
off).
back in that
16:9 Wide: Select when
a
sides of the
16:9 wide TV is connected.
Disc Audio
4:3
Letterbox
Disc Subtitle
4:3
Panscan
Disc Menu
16:9 Wide
Rating
Country
TV
5.1
Code
Aspect
Menu
Language
Speaker Setup
Others
18
style (Both
cut
Before
Operation
Others
Speaker Setup
Adjust
the
following settings
for the built-in 5.1 channel
The
surround decoder.
Front
Center
Disc Subtitle
R
TV
Code
Menu
5.1
changed
between On and Off.
Rear Surround
Disc Audio
DRC
On
Speaker (L/R)
Disc Subtitle
Vocal
On
Disc Menu
PBC
Test
Rating
Auto
Return
Country
0dB
Size
Large
Distance
Language
Speaker
1 ft
Speaker Setup
TV
1
Select "5.1
Speaker Setup" using
buttons
the setup
2
While "5.1
the 3/4
5.1
menu.
Speaker Setup"
is selected, press 2
Press 2 buttons to select the desired
Speaker
Off
Code
Language
Speaker Setup
Others
button.
3
4 Adjust options by using
On
Play
Aspect
Menu
Others
on
PREATION
Sub Woofer
Volume
Aspect
be
SELECT/ENTER. The
R
Front L
Rating
Country
can
Press 3/4 to select the desired item and press
setting of the selected item is
Speaker (L/R)
Disc Audio
Disc Menu
DRC, Vocal, PBC and Auto Play settings
changed.
speaker.
Dynamic Range Control (DRC)
With the DVD
format, you can hear a program's soundtrack in the most accurate and realistic presentation
thanks to
possible,
341 2 buttons.
digital
audio
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the
selection
at
Select
a speaker that you want to adjust. ((Front speak(Left), Front speakers (Right), Centre Speaker, Rear
speakers (Left), Rear speakers (Right), or Subwoofer))
a
quietest ones). Then, you may listen to a movie
losing clarity of sound. Set
lower volume without
DRC to On for this effect.
ers
Set Vocal to On
ote
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
Volume
Press 1 / 2 to
adjust the output
speaker. (-6dB +6dB)
level of the selected
Size
Since the
speaker settings
settings.
are
is
playing.
fixed, you
cannot
Playback
Off: Video CDs with PBC
are
If you connected
Distance lets the
to travel to reach your set
sound from each
same
time.
(1
ft
=
listening point. This allows the
speaker to reach the listener at the
30.48 cm)
can
Play
not set the distance of subwoofer
on
the disc will mix
to On
or
Off.
played according to the PBC.
played the same way as Audio
DVD
so a DVD disc automatically
playing whenever the DVD is inserted.
If Auto Play mode is set to On, this unit will search a
title that playback time is longest and then play back
title automatically.
can
set up the unit
starts
On: Auto
Off: Auto
ote
You
multi-channel karaoke DVD
CDs.
You
unit, setting the
a
(PBC)
are
change
know how far the sound has
Control
On: Video CDs with PBC
Auto
to your
when
PBC
Distance
speakers
speakers
only
The karaoke channels
into normal stereo sound.
Set
~
the
Vocal
Play
Play
the
function is activated.
function is not activated.
speaker.
ote
Test
Press SELECT/ENTER to test the
signals
of each
The Auto
Play
function may not work for
some
DVDs.
the volume to match the volume of test
speaker. Adjust
signals memorized in the system.
Front Left (L)
Center
Front Right (R)
Rear Right (R)
Rear Left (L)
Subwoofer
→
→
→
→
→
Return
Press SELECT/ENTER to return to the
previous
menu.
19
Before
Operation
Parental Control
Rating
Movies
DVDs may contain
on
applies
to the
complete
the disc. These
scenes on
8, and alternatively,
1 to
not suitable for
scenes
Therefore, discs may contain Parental Control
information that
certain
DVD
Enter the code of
DVD
children.
Code
Country
able for selection
more
on some
suitable
discs.
disc
scenes are
Ratings
avail-
Country
TV
7
6
Country
TV
Menu
1
4
Code
3
Aspect
1
Unlock
5.1
Speaker Setup
Speaker Setup
Select
Code
Country
the setup
Others
3 of
"Rating"
the first character
1
Select
2
3
While
"Rating"
on
the
Setup
menu
using
the
3/4 buttons.
Shift the
"Rating"
is selected,
on
cursor
using
on
left.
the 3/4 buttons.
using
2 button and select the
5 second character using buttons.
Press SELECT/ENTER
confirm
6 code selection, then press SETUPyourexitcountry
the
3/4
press 2.
to
When you have not entered a password yet.
Enter a 4-digit password using the numbered buttons to create
a
When you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the
personal 4-digit security
ote
Confirmation of the
the code is
rating from 1 to 8 using the 3/4 but(1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
a
Unlock: If you select Unlock, Parental Control is not
active. The disc will play in full.
1
Follow
Enter the old
3
Select
played. Higher
unless
an
rated
alternative
scenes
scene
The alternative must have the
lower
If
will not be
is available
same
on
rating
played
or a
no
Press SELECT/ENTER to confirm your rating
to exit the menu.
5 selection, then press SETUP
ote
This function may not work for
20
4
some
DVDs.
1-2
as
code
shown above to the left
(Rating).
code, then press SELECT/ENTER.
Change using
3/4 buttons then press
Enter the
new
4-digit code,
then press
SELECT/ENTER.
5
Enter
exactly the same code a second
fy by pressing SELECT/ENTER.
6
Press SETUP to exit the
If you
the disc.
suitable alternative is found, playback will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
one.
Steps
4-digit
SELECT/ENTER.
1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
the
2
tons. One
be
is necessary when
the 4-digit code"
below.).
Changing
If you make a mistake before pressing SELECT/ENTER,
press CLEAR and enter 4-digit security password again.
Ratings
4-digit password
changed (see "Changing
pass-
word, then press SELECT/ENTER.
Select
to
menu.
personal 4-digit security password.
then press SELECT/ENTER. Enter the 4-digit password again and press SELECT/ENTER to verify.
4
the 3/4 buttons
Code is selected, press 2.
Country
2
step
3
Select
4
Follow
Change
using
menu.
While
2
Language
Language
Others
5
Rating
Code
Aspect
Menu
5.1
Disc Menu
IQ
Rating
are
8
Disc Subtitle
Code Set
Disc Menu
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
were
to the list
List", page 34.).
Disc Subtitle
The Parental Control feature allows
country-dependent.
disc, referring
Disc Audio
rated from
whose standards
country/area
Code
(See "Country
to
or
scenes are
a
used to rate the DVD video
If you
menu.
forget your 4-digit
forget
your
password,
time and veri-
code
to clear the current pass-
word, follow the procedure below.
1
Press SETUP to
2
Use the Number buttons to enter the
display
the
setup
menu.
6-digit
number
"210499".
The
3
4-digit password
Enter
a new
code
is cleared.
as
shown above to the left
(Rating).
Operation
the radio stations
Presetting
You
can
30 stations for
preset
Before
ume
with RADIO
make
FM/AM(MW).
that you have turned the voltuning,
down to the minimum level.
sure
Press TUNER to show
1
display window.
Every time you press
changes alternately.
FM/AM(MW)
this
the
frequency
in the
on
the next
the front
Tuning
3
Manual
when the unit tunes in
station.
a
Press PROG./MEMO
A
on
the front
Press PRESET DOWN/UP
6
remote
control)
(or
panel.
display window.
PRESET D/E
to select the
on
preset number
or
?F
or
Press PROG./MEMO
Repeat steps
2 to 5 to store other stations.
on
or
AUX).
panel for
in the display
front panel, the
about two seconds, "CLEAR appears
window and then press CLEAR on the
stations are cleared.
For your reference
If all stations have already been
entered, "FULL"
preset number, follow the steps
the remote
appears
or
a
4-5
.
preset numbers
Press and hold PRESET DOWN/UP
on
control)
(
or
until the desired
press the button
DVD/CD
repeatedly.
or
to select another
For your reference
If a FM program is
?
noisy
repeatedly so that
disappears in the display window. There will be no
stereo effect, but the reception will improve. Press
MODE/RIF again to restore the stereo effect.
"
Press MODE/RIF
?
"
To
improve reception
Reposition the supplied
antennas.
Use MODE/RIF
(Radio Interference Filter) function
reception if stereo reception is
to switch to Mono
distorted
While
by noise.
recording weak AM(MW) broadcasts,
occurs, press MODE/RIF
message will appear in the display window for
moment and then a preset number will flash.
the
(TAPE,
otes
the front
"
To recall
tuning, see "Manual Tuning".
automatic tuning, see "Automatic Tuning".
Press POWER to turn off the unit
again.
Press and hold PROG./MEMO
change
non-preset radio stations
manual
function mode
The station is stored.
To clear all memorized stations
To
tunes in
Adjust the volume by rotating VOLUME knob
(or pressing VOLUME -/+ on the remote control)
repeatedly.
?F
you want.
5
button, the unit
station.
To turn the radio off
preset number will flash in the
4 the
want.
Tuning
Use the MULTI JOG DIAL.
3
preset
To listen to
Press the TUNING DOWN/UP.
Scanning stops
(or PRESET D/E on
control) repeatedly to select the
preset station you
panel until
change, then
in the
Press PRESET DOWN/UP
the remote
Each time you press this
indication starts to
FM/AM(MW)
window.
The last received station is tuned in.
otes
-
display
2
release.
Automatic
to the radio
Press TUNER to select
1
button, FM/AM(MW)
Press TUNING DOWN/UP
2
Listening
PRESET D/E
preset number
once.
if noises
OPERATION
Operation
with RADIO
RDS Function
-
Programme Search (PTY)
OPTIONAL
About RDS
A
ability to encode broadProgramme Type (PTY) codes that indicate
type of material being broadcast. The following list
This unit is
the
which
shows the abbreviations used to indicate each PTY
major
benefit of RDS is its
casts with
equipped with RDS (Radio Data System),
brings a wide range of information from FM radio.
RDS is a system for transmitting station call signs or
network information, a description of station programme
type text message about the station or specifics of musi-
along
with
an
explanation
of the PTY.
cal selection and the correct time.
RDS
Tuning
When
FM station containg RDS data is tuned in, the
automatically display the station's call sign and
the RDS indicator will light in the Display Window as
well as indicators for the programme type recognition
(PTY), Radio Text (RT), Clock Time (CT) and RDS services programme (PS) if transmitted by the station.
a
unit will
RDS
Display Options
The RDS
system is capable of transmitting a wide variety of information in addition to the initial call sign that
appears when a station is first tuned. In normal RDS
operation the display will indicate the station name,
broadcast network
front
panel
data
types
or
call letters.
enables you to cycle
in the sequence:
PTY
FREQUENCY
(PS
Pressing RDS on the
through the various
RT
CT)
(Programme type recognition)- The programme type is shown on the display window.
RT (Radio text recognition)- The radio station's
name is displayed on the display window.
CT (Time controlled by the channel)- Enable the
PTY
unit to receive the actual time and show it
play window.
PS (Programme Service name)- The
title is displayed on the display window.
on
the dis-
programme
You may search for a
following these steps:
otes
Some RDS stations may not choose to include some
of these additional features. If the data required for the
selected mode is not
Window will show
a
being transmitted,
PTY
the
Display
NONE, RT NONE, CT
NONE, PS NONE message.
1
specific Programme Type (PTY) by
Press TUNER to select FM mode.
Select
desired station by pressing
DOWN/UP.
When the RDS transmission is received, the
display shows the program service name (PS) after
RDS indicator appears.
a
2 TUNING
3
Press the RDS to select PTY mode.
To search for
different
the PRESET
is still disthe list of available PTY
press
4 DOWN/UP while the lastPTY,
PTY in
a
use
played
to scroll
through
types.
5
When the PTY is
selected, press the TUNING
DOWN/UP within 5 seconds.
The unit will go into an automatic search mode and
attempt
to find the next station with
signal strength
acceptable
that matches the desired PTY
type.
with TAPE
Operation
Basic
Press TAPE
1
("NO
TAPE
Open
2
(or TAPE-1/2)
"
Insert
to select
appears in the
cassette TAPE 1
PUSH EJECT
3
To
Playback
one or
STOP(
display window.)
to the
(or 2) by pushing
Stop Play
Press
tape function.
STOP( )/CLEAR
) on the remote
Tape Counter
position.
tape side
the bottom and then close the TAPE 1
to
(and/or 2)
Playing
panel or TAPE
during playback.
the front
Reset
Press COUNT.RESET
two cassettes with the
on
control
during playback.
(or 2) 0000
time appears "TAP -1
"
in
OPERATION
display
window.
door.
Press
4
or
(or
:
OPTIONAL)
G (or F: OPTIONAL)
on
on
the front
panel
AUTO STOP DECK (TAPE 1/2)
After auto stop deck plays front side of cassette, the unit
stops automatically.
You
Pressing
After the cassette of TAPE 1
Twice
front and
plays
reverse
or
on
Fast Forward
the front
panel
or
2
or
2
or on
the
during playback, press G (or F
at the
tape position you
want.
Dubbing
Press TAPE
1
plays front or reverse (backward
play) side, stops automatically.
Once
:optional)
by
After the cassette of TAPE 1
/
remote control
2
To
or TAPE-1/
tape
to
tape.
2.
?
Cassette TAPE 1- Insert the
?
Cassette TAPE 2- Insert
Function
Display
Rewind
This function shows how to record from
2) : OPTIONAL
select direction of the cassette you want
pressing PLAY MODE.
can
Play
After press
the remote control.
AUTO REVERSE DECK (TAPE
To
a
playback tape
blank
tape
to dub.
to copy
on.
Press NOR-DUBB./HI-DUBB..
?
NOR-DUBB.
?
HI-DUBB.
-
-
Normal
Double
speed copying
speed copying
stop recording, press STOP (x).
side,
stops automatically.
After the cassette of TAPE 1
Three
plays
times
or
2
six times
reverse
repeatedly front and
side, stops automatically.
Recording
Basic
1
2
CD to
Setting
Press CD
Open
or
TUNER to select source.
the cassette deck TAPE 2 and insert
Press PLAY MODE
repeatedly
to set the
1
Radio, CD
from
Press z/[]
the front
on
or
Auxiliary source
mode.
2
or
(or
:
G (or F: OPTIONAL)
The
recording
is
To pause the
Press z/[].
To
OPTIONAL)
Stop
Press
the
on
begun.
cassette.
1
2
synchro recording function dubs
programmed titles automatically into
CD
Press CD SYNC. in stop mode.
"REC" flashes and "CD SYNCHRO"
the
display
displays
in
window.
The
synchronized recording is started
automatically after about 7 seconds.
otes
panel.
"REC" flashes and holds the cassette in pause
Press
complete
a
recording
direction.
Recording
a
and
a
blank cassette into the cassette compartment.
Set the recording direction : OPTIONAL
Tape Synchronized Recording
The CD
on
the front
panel
the remote control.
If you wish to record from the desired track, select
the desired track with MULTI JOG DIAL before
commencing CD synchro recording.
A function change is not possible during
recording.
recording
recording
STOP(x).
23
Operation
Playing
with DVD and Video CD
Playback Setup
Tu rn
on
General Features
DVD and Video CD
a
DVD
VCD2.0
the TV and select the video
VCD1.1
input
ote
Unless stated
source
Audio
the
system: Turn
input
source
on
the audio
otherwise, all operations described
system and select
connected to the unit.
Moving
to another TITLE
DVD
Press CD OPEN/CLOSE button to open the disc
1
tray.
2
playback
1/3
Load your chosen disc in the tray, with the
side facing down.
When
a
disc has
another title
Press
Playing
one or
Place discs
on
When
two discs
trays
1 and 2.
menu
might
appear
If
a menu screen
is
DVD
or
loading
a
a
num-
title number.
1 /12
title
on a
more
disc has
than
as
1/3
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
SELECT/ENTER.
DVD
ote
Use the 1 /2/3/4 buttons to select the
want to
to select
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9) or press.
1 /2 to select the chapter/track, then press
displayed
may be displayed first after
Video CD which offer a menu.
menu screen
to
press DISPLAY. Then, press 3/4 to select the
instead.
The
can move
or > briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
start, press PLAY.
cases, the disc
title, you
Press PREV./NEXT .
Press CD OPEN/CLOSE button to close the tray.
Playback starts automatically. If playback does not
some
one
to another CHAPTER/TRACK
chapter/track
press the DISC SKIP button
to rotate the trays. Place the next disc on tray 3.
In
a
disc has
Playing three discs
After placing two discs,
?
(0-9)
VCD1.1
DVD
than
DISPLAY, then press the appropriate
Moving
?
more
follows:
as
bered button
3
use
the remote control. Some features may also be
available on the Setup menu.
connected to the unit.
view,
then press
title/chapter you
SELECT/ENTER to start play-
For
two-digit numbers, press
(0-9)in rapid succession.
the numbered buttons
back.
Press TITLE
or
MENU to return to the
Search
menu screen.
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
setting
the
and the exact
menu screen.
operating procedures
setup. See page
19.
Notes
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
"Parental
Control",
--DVDs may have a
Your player will not
different from your
player is 5 (five).
24
two seconds
during playback.
The
now
player
will
(see
page 20).
region code.
on
play discs that have a region code
player. The region code for this
3
or
> for about
go into SEARCH mode.
or > repeatedly
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
To return to normal play, press PLAY.
to select the
for
menu
You also may set PBC to Off under
--
VCD1.1
2 Press and hold PREV./NEXT .
may differ depending on the disc.
Follow the instructions on the each menu screen.
using
VCD2.0
1 Press and hold PREV./NEXT .
VCD2.0
Menu
DVD
Operation
with DVD and Video CD
General Features
Still Picture and
DVD
VCD2.0
2 You
can
To
during playback.
go into PAUSE mode.
advance the picture frame-by-frame
"
by
pressthe remote control.
OFF
sequence in
"
*
A
VCD1.1
title:
a
appears
briefly
starting point.
the TV
on
OPERATION
screen.
at your chosen end point.
"A B" appears briefly on the TV screen, and the repeat
repeatedly on
play, press PLAY.
again
begins.
sequence
3 To cancel the sequence, press A-B.
Slow Motion
DVD
1 Press SLOW F]
VCD2.0
VCD1.1
Time Search
]G during playback.
or
will enter SLOW mode.
player
a
2 Press A-B
3 To return to normal
The
AB
repeat
VCD2.0
DVD
1 Press A-B at your chosen
now
PAUSE/STEP
ing
A*
VCD1.1
will
player
A-B
Repeat
Frame-by-frame playback
1 Press PAUSE/STEP
The
(continued)
2 Use the SLOW F] or ]G to select the required speed:
t 1/16, t 1/8, t 1/4 or t 1/2 (backward) or T
1/16, T 1/8, T 1/4
3 To return to normal
or
T 1/2
PLAY,
(forward).
0:20:09
DVD
-:--:--
The Time Search function allows you to start
any chosen time on the disc.
1 Press DISPLAY
display
press PLAY.
appears
during playback.
the
on
The
playing
at
on-screen
screen.
The Time Search box shows the
elapsed playing
time of the
current disc.
ote
Slow motion
playback
in
is not
reverse
applicable
2 Within 10
for
Video CD.
VCD2.0
DVD
TITLE
TRACK
DVD Video Discs
1 To
repeat
the
-
VCD1.1
the
DISC
ALL
currently playing chapter,
2 To
icon appears
on
the TV
4 Within 10
press
a
Playback
screen.
an
icon appears
on
the TV
Repeat
e xit
The
1 To
repeat
The
2 To
invalid
starts from the selected time
on
to confirm
the disc. If you enter
time, playback will continue from the
current
point.
Memory
screen.
DVD
-
the TV
on
VCD1.1
CD
press REPEAT
Off icon appears
on
the TV
a
five time.
player.
screen.
Repeat Track
currently playing,
icon appears
on
the TV
press REPEAT.
screen.
3 To
Disc icon appears
on
the TV
a
three time.
Repeat
e xit
The
the TV
on
on
the TV
a
a
3D Surround
to
use
PBC, you
the
Repeat
settings
memo-
VCD2.0
DVD
it.
VCD1.1
3D SUR
must set PBC to Off
on
function. See page 19.
the
can
produce
a
3D Surround
effect, which
simulates multi-channel audio
playback
conventional stereo
instead of the five
more
Video CD with
menu
--
This unit
four time.
screen.
ote
setup
disc that has its
screen.
press REPEAT
Off icon appears
a
Settings are stored in memory for use any time.
This player does not memorize settings of a disc if
you switch off the unit before commencing to play
BYPASS
all icon appears
Repeat mode,
Repeat
If you load
screen.
repeat the all disc currently playing, press REPEAT
The
for the last disc
otes
--
second time.
Repeat
settings
rized, the latest stop position is automatically recalled.
Repeat Track/Disc/All/Off
the track
user
that you have viewed. Settings remain in memory even
if you remove the disc from the player or switch off the
screen.
repeat the disc currently playing, press REPEAT
The
On
seconds, press SELECT/ENTER
This unit memorizes the
All icon appears
Repeat mode,
Repeat
Video CDs
4 To
sec-
repeat the all disc currently playing, press REPEAT
The
a
hours, minutes, and
in the box.
a
four time.
4 To
right
Last Condition
Repeat Title
the number buttons to enter
the start time.
second time.
3 To
to select the Time
display.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
repeat the title currently playing, press REPEAT
The
use
start time. Enter
OFF
Repeat Chapter/Title/All/Off
Repeat Chapter
seconds,
required
onds from left to
REPEAT.
The
on-screen
The "-:--:--" appears in the Time Search box.
3 Within 10
Repeat
CHAPT
seconds, press 3/4
Search icon in the
speakers,
speakers normally required
multi-channel audio from
a
home theater
2 To turn off the 3D Surround
or
to listen to
1 Press SOUND to select "3D SUR"
again
from two
system.
during playback.
effect, press SOUND
to select "BYPASS".
25
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
(continued)
during playback
or
still
playback
the
repeatedly,
to acti-
the
move
the
through
normal
resume
playback
or
use
the 1 /2/3/4 buttons to
return to
paused image.
1 Press TITLE.
screen.
ote
zoom
function may not work for
some
2 The
DVDs.
Marker Search
VCD2.0
DVD
a
menu, the
Otherwise, the disc
list
menu can
and subtitle
3 To
menu
menu
will appear
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
remove
the
on
may appear.
again.
VCD1.1
DVD
Disc Menu
MARKER SEARCH
1/9
your selection,
DVD
Title Menu
If the current title has
The
highlight
then press SELECT/ENTER.
picture.
3 Press CLEAR to
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
press the appropriate number button to select an option.
Or,
steps.
2 Use the 1 /2/3/4 buttons to
zoomed
level
magnification
the contents of DVD Video
Checking
discs: Menus
vate the Zoom function.
If you press ZOOM
increases up to six
DVD
VCD1.1
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
1 Press MENU.
You
can
nine
points
To enter
1
start
playback
from
a
memorized
point. Up
be memorized.
can
2 To
During disc playback, press MARKER when
playback reaches the spot that you want to
Repeat step
on
the TV
To Recall
1 to enter up to nine Marker
a
disc
playback,
points
on a
press SEARCH.
menu
will appear
on
seconds, press 1/2 to select
number that you want to recall.
a
the
screen.
Marker
will start from the Marked
remove
scene.
the MARKER SEARCH menu, press
SEARCH.
1
During
disc
playback,
The MARKER SEARCH
2
3
recorded at different
camera
angle
the Audio
appears
on
Language
repeatedly during playback
language or audio track.
the
DVD
to hear
a
VCD2.0
VCD1.1
the Audio Channel
Press AUDIO
repeatedly during playback to hear
(STER., LEFT or RIGHT).
dif-
dif-
a
menu
will appear
on
the
screen.
DVD
ABC
1 ENG
Press SUBTITLE
different subtitle
repeatedly during playback
languages.
to
see
the
erase.
ote
The Marker number will be erased from the list.
4
Repeat steps
5
To
2 and 3 to
erase
additional Marker
numbers.
remove
SEARCH.
a
display.
Changing
Press CLEAR.
26
scenes
1/1
Press AUDIO
Subtitle
press SEARCH.
Press 1/2 to select the Marker number that you want
to
DVD
ferent audio channel
Marked Scene
a
Changing
ferent audio
3 Press SELECT/ENTER.
Playback
Angle
The number of the current
2 Within 10
To clear
again.
angles, you can change to a different camera angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
Marked Scene
The MARKER SEARCH
4 To
displayed.
If the disc contains
briefly.
screen
disc.
During
is
the disc menu, press MENU
remove
Camera
memorize.
1
menu
mark, follow these steps.
a
The Marker icon will appear
2
The disc
to
the MARKER SEARCH menu, press
If
appears, the feature is not available
on
the disc.
with Audio CD and MP3/WMA Disc
Operation
Playing an Audio CD and
MP3
CD
The unit
can
MP3/WMA Disc
CD-ROM, CD-R
MP3/WMA formatted
recordings
Before
playing MP3/WMA recordings,
MP3/WMA Recordings on right.
read the notes
files that have
on
The
on
player
a
MP3/WMA Disc
limited
Press 3/4 to select the MP3/WMA then press
2 SELECT/ENTER.
1.
as
menu
appears on the TV screen.
to the MP3/WMA-JPEG
2.
move
menu.
3.
4.
Program
MP3/WMA
TRACK 1.mp3
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
Clear All
TRACK 8.mp3
00:00
5.
OFF
1
Microsoft audio
compression
double the audio
with this
compatibility
is
player
follows:
A
Creator", which
single
creates
session disc
first track. If there is
3
Press 3/4 to select a folder, and SELECT/ENTER.
A list of files in the folder appears.
4
Press 3/4 to select
SELECT/ENTER.
track, it
to
a
track then press PLAY
or
6.
cannot
playback
the disc
File
elapsed playing
menu.
MP3/WMA files. If you wish
files, format all the data in
should be named
incorporate ".mp3"
e.g. "********.MP3"
the current track's
MP3/WMA file in the 1st
playback
MP3/WMA
system.
MP3/WMA files in the
requires
no
ISO9660 file
an
or use a new one.
names
and must
time will appear on the display window and
Playback will stop at the end of the disc.
Press MENU to
OPERATION
file
Sampling Frequency / only at 44.1 kHz (MP3),
(WMA)
Bit rate / within 32-320 kbps (MP3),
32-128 kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "EasyCD
TRACK 7.mp3
Press TITLE to
a
22.05-44.1 kHz
Press RETURN to
Playback starts.
During playback,
MP3 file that has
an
".mp3".
technology.
WMA (Windows Media Audio) offers
compression of the MP3 format.
JPEG
1
not read
(Window Media Audio)
An WMA file is
MP3 WMA
choice
can
About WMA
the TV
go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
screen.
The MP3/WMA
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
MPEG1 audio
extension other than
Insert a disc and close the tray.
Audio CD; Audio CD menu appears
1
Recordings
An MP3 file is audio data
on
CD-RW discs.
or
MP3/WMA
on
About MP3
WMA
play
Notes
or
using
8 letters
or
less
".wma" extension
or
"********.WMA".
7.
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
650.
to the next page.
move
move
to the
previous
page.
This unit
requires discs/recordings
to meet certain
technical standards in order to achieve
CD
Program
1
3
E
2
TRACK 01
TRACK 08
2
TRACK 1.mp3
TRACK 02
TRACK 10
1
TRACK 2.mp3
TRACK 03
TRACK 01
3
TRACK 3.mp3
quality.
Clear All
TRACK 07
STER.
0: 56: 18
Audio CD
Clear All
TRACK 8.mp3
BYPASS.
1
00:00
1
MP3/WMA
menu
If you
are
in
return to the
5
a
Customers should also note that
menu
file list and want to return to the Folder
the 3/4 to
To
highlight
previous menu
stop playback
many different types of
OFF
required
Tip
use
optimal playback
automatically set to
(including CD-R containing MP3
or WMA files). That require certain pre-existing conditions (see above) to insure compatible playback.
TRACK 6.mp3
TRACK 7.mp3
TRACK 06
are
are
recordable disc formats
TRACK 5.mp3
TRACK 05
Pre-recorded DVDs
these standards. There
TRACK 4.mp3
TRACK 04
2
Program
MP3/WMA
TRACK 12
list,
and press SELECT/ENTER to
permission
is
in order to download MP3/WMA files and
music from the Internet. Our company has no right
grant such permission. Permission should always
to
be
sought
from the
copyright
owner.
screen.
at any other
time, press STOP.
27
Operation
with Audio CD and MP3/WMA Disc
Pause
Repeat
1 Press PAUSE/STEP
during playback.
2 To return to
playback,
PAUSE/STEP again.
press PLAY
To
or
1
press
repeat
The
>
or
playback to go to the next track
beginning of the current track.
Press PREV./NEXT . twice
the
In
of audio
case
briefly during
or
CD,
the track number
to
briefly
step back
3 To
to
directly to any track, enter
the numbered buttons (0-9)
to go
using
Repeat
Repeat
icon and "A
again
during playback.
e xit
1 To
repeat the track currently playing, press REPEAT.
The
2 To
Repeat Track
repeat
icon appears
the disc
on
the TV
screen.
press REPEAT
currently playing,
a
second time.
The
3 To
a
Repeat
Disc icon appears
on
the TV
screen.
repeat the all disc currently playing, press REPEAT
three time.
The
4 To
The
1 To
Repeat
e xit
all icon appears
Repeat mode,
Repeat
on
the TV
screen.
press REPEAT
Off icon appears
on
the TV
four time.
a
screen.
repeat the track currently playing, press REPEAT.
The
Repeat
icon and "TRACK" appears
on
the
menu
screen.
2 To
repeat all tracks
on a
disc, press REPEAT
a
second time.
The
Repeat
3 To cancel
The
Repeat
icon and "ALL" appears
Repeat mode,
the
on
menu screen.
press REPEAT
icon and "OFF" appears
on
the
a
third time.
menu screen.
Search
1 Press and hold PREV./NEXT .
two seconds
The player will
or
> for about
during playback.
now
go into SEARCH mode.
2 Press and hold PREV./NEXT .
or > repeatedly
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
to select the
Search
speed
and direction
are
indicated
screen.
3 To return to
playback,
press PLAY.
on
the
menu
"
appears
on
the
menu screen.
at your chosen end point.
on the menu screen,
begins
to
play repeatedly.
the sequence and return to normal
A-B
again.
The
Repeat
icon and "OFF" appears
on
the
play,
press
menu screen.
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear a
(STER., LEFT, or RIGHT).
different audio channel
Repeat Track/All/Off
press A-B at your chosen start*
icon and "A B" appears
and the sequence
to return to the
track.
previous
sequence.
2 Press A-B
to another Track
Press PREV./NEXT .
a
During disc playback,
ing point.
The
Moving
A-B
with JPEG Disc
Operation
Viewing
This unit
JPEG disc
a
5
JPEG
play discs with JPEG files and Kodak picplaying JPEG recordings, read the
JPEG Recordings on right.
can
To
stop viewing
The JPEG
menu
to another File
ture CD. Before
Moving
notes
Press PREV./NEXT .
1
on
Insert
disc and close the tray.
a
The MP3/WMA-JPEG choice
TV
menu
appears
on
the
screen.
1 Press PAUSE/STEP
JPEG
To
Press 3/4 to select the JPEG then press
SELECT/ENTER.
menu
appears
or
to the
on
the TV
player
will
during
OPERATION
slide show.
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
MP3 WMA
The JPEG
during viewing a
previous file.
once
Still Picture
The
2
>
or
to advance to the next file
picture
time, press STOP.
at any other
appears.
the
flip
now
picture
Press 3/4
during showing a picture
picture horizontally or a vertically.
screen.
to
flip
the
JPEG
To rotate
Folder1
Folder2
picture
Folder3
Press 1/2
Folder4
during showing
Folder5
picture
Folder6
Folder7
clockwise
or
a
picture
to rotate the
counter clockwise.
Folder8
Slide
Speed
Off
Notes
3
Press 3/4 to select a folder, and SELECT/ENTER.
A list of files in the folder appears.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
on
Depending
JPEG
Recordings
upon the size and number of the JPEG
a long time for the unit to read the
files, it could take
disc's contents. If you don't see an on-screen display
after several minutes, some of the files are too big
---
reduce the resolution of the JPEG files to less than 2
Tip
If you
list,
"
are
use
"
in
a
file list and want to return to the Folder
the 3/4 buttons
on
the remote to
If
a
particular file, press
file and press SELECT/ENTER
3/4 to
or
PLAY.
Press TITLE to
the disc should be
When you are using software such as
Creator" to burn the jpeg files into the
that all the selected files have the
Viewing the file proceeding starts.
During viewing a file, press RETURN
previous menu (JPEG menu).
when
to
move
to the
to the next page.
Press MENU to move to the previous page.
move
copying
into the CD
If the files have
rename
File
Folder1
as
them
names
be read
JPEG
on
Some disc may be incompatible due to different
recording format or condition of disc.
want to view
a
and burn another disc.
less than 650.
menu screen.
you
4 highlight
pixels
Total number of files and folders
highlight
and press SELECT/ENTER to return to the
previous
mega
as
without
CD
ensure
".jpg"
extensions
layout.
".jpeg" extensions, please
files.
".jpg"
this unit. Even
by
image
JPEG
".jpe"
".jpg"
or
"Easy
CD-R,
extension will not be able to
though
files in windows
the files
are
shown
explorer.
Picture1.jpg
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
5/32
1024X768
Slide
Speed
Off
5/32
1024X768
Picture5.jpg
Tip
There
are
three
viewing
Slide
Speed options: Fast,
to highlight the Slide
select the option you want to
Normal, Slow, and Off. Press 1/2
Speed
then press 3/4 to
use, and press SELECT/ENTER.
29
Programmed Playback
The
Program function enables you
Program can contain 30 tracks.
Programmed Playback
CD
VCD2.0
with Audio CD
or
on
in the
during playback (Audio CD
to enter the Program
stop mode
1
Follow
mark will appear to the right of the word
the right side of the menu screen.
Program
2 place
2 to
3 Programsteps
left.
additional tracks
place
on
the
list.
Press PROGRAM to exit the
mark will
Edit
Program
mode;
Program
MP3/WMA
disappear.
E
TRACK 8.mp3
TRACK 1.mp3
TRACK 2.mp3
TRACK 2.mp3
TRACK 4.mp3
TRACK 3.mp3
Select the disc number
2
on
a track, then press SELECT/ENTER to
the selected track on the Program list.
Follow
E
with MP3/WMA
step 1 of "Programmed Playback with
Audio CD and Video CD"
Select
E
ote
the
memory.
Programmed Playback
Edit mode.
The
player
Disc
Press PROGRAM
only)
WMA
to store your favorite tracks from any disc in the
and Video CD
1
MP3
VCD1.1
TRACK 3.mp3
TRACK 4.mp3
1/2/3/4.
by pressing
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
Clear All
TRACK 8.mp3
3
Select
a
using 3/4, then press SELECT/
place the selected track on the
track
ENTER to
Program
Follow
to
place
additional tracks
the
on
4 Audio
Program
1
3
VCD
E
Program
12
TRACK 12
TRACK 04
3
TRACK 01
TRACK 08
2
TRACK 01
TRACK 03
3
TRACK 02
TRACK 10
1
TRACK 02
TRACK 01
2
TRACK 03
TRACK 01
3
TRACK 03
TRACK 04
TRACK 04
TRACK 05
TRACK 05
menu
CD and Video CD"
playback
on
from
left.
programmed playback
of MP3/WMA menu, select
and then press SELECT/ENTER.
E
2
OFF
3
steps 5-7 of "Programmed Playback with
To resume normal
In
CD
00:00
MP3/WMA
list.
Repeat step 2-3
Program list.
4
1
case
Repeat Programmed
a
track of CD list
Tracks
TRACK 06
Clear All
TRACK 07
2
0: 56: 18
STER.
BYPASS.
3
STER.
0: 56: 18
Clear All
To
BYPASS.
The
repeat the track currently playing, press REPEAT.
icon and "TRACK" appears
Repeat
on
the
menu
screen.
Audio CD
VCD
menu
menu
To
Nots
You must select
a
disc number of audio CD
CD. If selected track is other kind fo disc
or
(DVD
Video
or
programmed
track you selected last is
highlighted
on
Press 3/4 to select the track you want to start
Press TITLE to
move
Press MENU to
move
to the
previous
played
icon and "OFF" appears
Repeat
the
on
menu screen.
press REPEAT
on
the
a
third time.
menu screen.
Note
play All
grammed playback, it
disc
is
(three disc) repeat proonly available to Audio CD.
playback
from
case
"PROG." indicator
case
programmed playback
disappears
on
the
a
track of CD list and
a
Track from
Program
MP3/WMA disc
List
Program
E
during playback (Audio CD and
only) or in the stop mode to enter the
Edit mode.
mark will appear.
2 Press 2 to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
erase
4 Press CLEAR.
The track will be erased from the
disappears
in the
Erasing
the
1 Follow
steps
Program
List"
as
Complete Program
1-2 of
"Erasing
list.
display
window.
a
List
Track from
Program
above.
2 Use 3/4 to select "Clear
menu screen.
of VCD menu, press PROGRAM.
"PROG." indicator
30
Erasing
once.
of Audio CD menu, select
then press SELECT/ENTER.
In
page.
Playback begins in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback stops after all of the tracks on the Program list
To resume normal
-
Repeat mode,
If you want to
The
to the next page.
Press PLAY to start.
have
-
list, press
1 Press PROGRAM
6 playing.
In
the program
icon and "ALL" appears
Repeat
To cancel
on
second time.
a
Press 2.
The
the program list.
7
The
The
MP3 ete.), the track skips.
OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use the Program function. See page 19.
5
repeat all tracks
REPEAT
All", then press
SELECT/ENTER.
The
complete Program
The programs
are
for the disc will be erased.
also cleared when the disc is removed.
Additional Information
to the Sub Woofer
Listening
-
1
Select "5.1
Speaker Setup" using
buttons
the setup
2
While "5.1
on
OPTIONAL
the 3/4
5
menu.
Speaker Setup"
While "Size" is
2
selected, select "Large" by using
button.
is selected, press 2
Disc Audio
button.
Disc Subtitle
R
Disc Menu
Select "Sub Woofer"
3 ly.
by using
2
button
repeated-
Country
TV
Code
Volume
R
R
Code
Volume
1 ft
Test
6
Return
5.1
Speaker Setup
While
button
the
Select "Size"
playing the CD or DVD, press the SOUND
repeatedly until the "PRO LOGIC, PL2
MOVIE, PL2 MUSIC
Others
4 setup
Speaker Setup
Others
None
Distance
Language
5.1
0dB
Size
Aspect
Return
Sub Woofer
Sub Woofer
Rating
Menu
1 ft
Test
Disc Menu
TV
Large
Large
Distance
Language
Disc Subtitle
Country
REF NC
0dB
Size
Aspect
Menu
Disc Audio
R
Sub Woofer
Rating
using
the 3/4
buttons
on
display
or
PL2 MATRIX" appears in
window.
the
ote
menu.
This function may not work for
some
DVDs.
About Active Subwoofer
3
2
1
4
5
6
1.
Adjusting Volume,
-
-
Power ON/OFF
3. INPUT
Turn VOLUME dial clockwise to increase the sound
Connect the Subwoofer
level
Input.
or
turn
on.
Output
Jack to this Audio
Turn VOLUME dial counterclockwise to decrease the
sound level
or
turn off.
4. Voltage Selector
If your unit is
back side, be
2. Phase Switch
Depending on frequency phase of the Main Switch,
phase of Subwoofer is set to 0 or 180 degrees.
When adjusting the Phase Switch, let your ear be the
judge as to which position allows your subwoofer and
speakers to perform optimally. If the Main Frequency
plied
before
(OPTIONAL)
equipped with a voltage
sure
selector at the
to set it to your local power sup-
connecting
the AC power cord.
the
and Phase do not match each
other, the low band
5. Power Switch
When
pressing the upper part of this switch, the
Pressing the lower part turns OFF
Power is ON.
the
power.
decreases.
6. Power Cord
31
Troubleshooting
Check the
following guide
for the
possible
of
cause
before
problem
a
service.
contacting
Cause
Symptom
No power.
?
The power is on, but the
unit does not work.
?
No
?
picture.
Correction
The power cord is disconnected.
No disc is inserted.
The TV is not set to receive DVD
signal
out-
?
Plug the power
securely.
?
Insert a disc. (Check that the DVD or, audio
CD indicator in the DVD display is lit.)
?
Select the appropriate video input mode on
the TV so the picture from the unit appears
on the TV screen.
put.
?
The video cable is not connected
securely.
cord into the wall outlet
Connect the video cable into the
?
jacks
securely.
There is no sound or only
a very low-level sound is
heard.
?
The connected TV power is turned off.
?T
?
The equipment connected with the audio
cable is not set to receive DVD signal output.
?
?
The audio cables
?
not connected
are
securely
The
playback picture
is poor.
The unit does not start
The power of the equipment connected with
the audio cable is turned off.
?
The audio
?
The disc is
connecting
cord is
damaged.
dirty.
the TV.
Connect the audio cable into the
so
jacks
securely.
.
?
urn on
Select the correct input mode of the audio
you can listen to the sound from the unit.
?T urn on the equipment connected with the
audio cable.
it with
?
Replace
?
Clean the disc.
new one.
?
No disc is inserted.
?
Insert a disc. (Check that the DVD, or audio
CD indicator in the DVD display is lit.)
?
An
?
Insert a playable disc. (Check the disc
color system and Regional code.)
?
The disc is
?
Place the disc with the
?
The disc is not
?
Place the disc on the disc
inside the guide.
?
The disc is
?
Clean the disc.
playback.
unplayable
?Amenu
is
disc is inserted.
placed upside
down.
within the
placed
guide.
dirty.
on
the TV
side down.
tray correctly
Press the SET-UP button to turn off the
?
screen.
playback
type,
menu
screen.
Severe hum
heard.
or
noise is
?
The
Rating
?
The
plugs
?
The disc is
?
?
level is set.
and
jacks
are
dirty.
dirty.
The speakers and
connected poorly.
components
?
Cancel the
ing level.
?
Wipe
?
Clean the disc.
them with
with alcohol.
Connect the
?
are
function
Rating
a
cloth
speakers
or
change
slightly
and
the rat-
moistened
components
securely.
The unit is located with too close to the TV.
?M
your TV away from the audio compo-
ove
nents.
Radio stations cannot be
tuned in.
?
The antenna is
positioned
or
connected
poorly.
?
Connect the antenna
?
Adjust
securely.
the antennas and connect
antenna if necessary.
?T
une
in the station
an
external
manually.
?
The signal strength of the stations is too
weak (when tuning in with automatic tuning).
?
No stations have been preset or preset stations have been cleared (when tuning by
?
The remote control is not pointed at the
remote sensor of the unit.
?P oint the remote control at the remote
of the unit.
?
The remote control is too far from the unit.
?
Operate
(7 m).
?
There is an obstacle in the path of the
remote control and the unit.
?
Remove the obstacle.
?
The batteries in the remote control
exhausted.
?
Replace
?
The
?
Insert such
?
Preset the stations.
scanning preset stations).
The remote control does
not work
properly.
The sound mode
Logic II mode
be changed.
or
Pro
cannot
ing
system
a
MP3
cannot
or
change
WMA disc.
are
while
play-
sensor
the remote control within about 23 ft
the batteries with
a
CD disc.
new ones.
Language Code
Enter the
(See
appropriate
18).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
REF NC
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
20).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Liechtenstein
SD
Sudan
Afghanistan
ET
Spain
Ethiopia
LI
AF
LK
Sri Lanka
SE
Sweden
AG
FI
Finland
LR
Liberia
SG
Singapore
AI
Antigua and
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
Georgia
MK
Macedonia
ST
Saint Tome and
AZ
GF
French
ML
Mali
SU
Former USSR
BA
Azerbaidjan
Bosnia-Herzegovina
GH
Ghana
MM
Myanmar
SV
El Salvador
BB
Barbados
GI
Gibraltar
MN
Mongolia
SY
Syria
BD
Bangladesh
Belgium
GL
Greenland
MO
Macau
SZ
Swaziland
BE
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
Guadeloupe (French)
MR
Mauritania
TF
BH
Bahrain
GQ
Equatorial
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
Malaysia
TN
Tunisia
BS
Bahamas
GY
MZ
Mozambique
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Barbuda
(European
Guyana
Guinea
Georgia
& S. Sandwich
(USA)
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Taiwan
Canada
HT
Haiti
NI
Nigeria
Nicaragua
TW
CA
TZ
Tanzania
CC
Cocos
Islands
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
Central African
Republic
ID
Indonesia
NO
UG
CG
Congo
IE
Ireland
NP
Norway
Nepal
UK
Uganda
United Kingdom
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
CI
Ivory
Coast
IN
India
NU
Niue
CK
Cook Islands
CL
Chile
CM
(Keeling)
Mayen
Islands
Outlying
Islands
IO
British Indian Ocean
NZ
New Zealand
US
United States
OM
Oman
UY
Uruguay
Cameroon
IQ
Territory
Iraq
PA
P anama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
Polynesia (French)
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
CS
Former Czechoslovakia
JM
Jamaica
PH
Papua New
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
Virgin
Islands
(British)
CV
Cape
Verde
JP
PL
Poland
VI
Virgin
Islands
(USA)
CX
Christmas Island
KE
Japan
Kenya
PM
Saint Pierre and
VN
Vietnam
CY
Cyprus
KG
Kyrgyzstan
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
DE
Germany
Djibouti
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
Mayotte
DM
Dominica
KP
North Korea
QA
Qatar
YU
Yugoslavia
Republic
Anguilla
Guinea
Miquelon
City
Grenadines
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
Republic
Islands
(French)
State
Specifications
Power
[Genral]
Power
Refer to the back
supply
consumption
Mass
11.2kg
External dimensions
[CD/V ]
[Video]
[Tuner] AM (MW)
(W
x
H
x
D)
273
327
x
x
356
Laser
Semiconductor
Frequency response (audio)
Signal-to-noise ratio (audio)
Signal-to-noise ratio (video)
Dynamic range (audio)
Harmonic distortion (audio)
40
Video
1.0 V
output
S-video
FM
panel.
200W
output
Tuning Range
Intermediate Frequency
Signal to Noise Ratio (Mono/Stereo)
Frequency Response
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
Output Power
mm
laser, wavelength
650
nm
18000 Hz
-
More than 70 dB
More than 60 dB
REF NC
(1 kHz)
(1 kHz)
More than 70 dB
0.2 %
(1 kHz)
(p-p), 75 Ω, negative
1.0 V
(Y)
(C)
(p-p),
(p-p),
0.3 V
sync., RCA
jack
75 Ω,
75 Ω
87.5 -108.0 MHz
10.7 MHz
60/55 dB
60
-
10000 Hz
522-1611kHzor530-1610kHz
450 kHz
35 dB
100
1800 Hz
-
Front: 100W
100W (6Ω / ch THD 10 %)
(6 Ω / ch THD10%)
Rear:40W+40W(6Ω/chTHD10%)
+
Center: 40W
[Amplifer]
TAPE
T. H.D
0.2%
Frequency Response
Signal-to-noise ratio
Tape Speed
42
Wow Flutter
0.25%
F.F/REW. Time
120sec
Frequency Response
Signal to Noise Ratio
Channel Separation
125
43dB(P/B)/43dB(R/B)
45dB(P/B)/42dB(R/P)
Erase Ratio
52dB
-
25000 Hz
80 dB
3kHz±50Hz
-
(MTT -111, JIS-WTD)
(C-60)
8000Hz
(MTT-5511)
Speaker
Way 3 Speaker
Front
[Speakrs]
[ActiveSubWofr]
Type
Impedance
Frequency Response
3
Way
6Ω
60
Sound Pressure Level
Input Power
Max. Input Power
NetDimensions(WxHxD)
Net Weight
Type
Impedance
Frequency Response
Center
2
-
(1m)
100 W
200 W
230x356x293mm
5.0
1
Way
1
kg
Speaker
6Ω
45-500Hz
Sound Pressure Level
86 dB/W
Rated Power
100 W
NetDimensions(WxHxD)
Net Weight
200x326x421mm
9.5
kg
Speaker
Speaker
Rear
2
Way
6Ω
20000 Hz
86 dB/W
Rated
2
(1m)
150
-
6Ω
20000 Hz
84 dB/W
Speaker
Speaker
2
(1m)
40W
80W
200x108x110mm
0.85kg
150
-
20000 Hz
84 dB/W
(1m)
40W
80W
108x150x110mm
0.80
kg
P/NO
:
3834RH0029S
Download PDF