LG | LM-D5542A | LG LM-D5542A Owner’s Manual

LGEIL-LM-D5542A_ENG_79W
DVD MINI HI-FI SYSTEM
OWNER'S MANUAL
MODEL
:
LM-D5542
LM-D5542A/D/X, LMS-D5542V,
LMS-D5542C, LMS-D5542T
R
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Designs
and
notice for
specifications
improvement.
are
subject
to
change
without
Safety
Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
a
risk of electric
shock to persons.
The exclamation
point
is intended to alert the
important operating
within
an
equilateral triangle
to the presence of
user
and maintenance
instructions in the literature
(servicing)
accompanying the
appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
CAUTION:
This unit
To
employs
ensure
manual
proper
carefully
a
Laser
use
System.
of this
product, please
and retain for future
require maintenance, contact
see service procedure.
Use of
controls, adjustments
other than those
specified
an
or
read this owner's
reference, should the unit
authorized service location-
the
performance
of
procedures
herein may result in hazardous
radiation exposure.
To
to laser
beam, do
not
try
to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus shall not be exposed to water,
dripping or splashing and that no objects filled with liquids,
as
vases, shall be
placed
on
the
apparatus.
on
It is forbidden
via cable,
prevent direct exposure
such
Notes
copyrights:
law to copy, broadcast, show, broadcast
in public, or rent copyright material without
by
play
permission.
This product is equipped with copy protection measures
developed by Macrovision. Copy protection signals are recorded on some discs. When recording these discs on a VCR,
picture noise will appear during playback.
This product incorporates copyright protection technology that
is protected by certain U.S. patent claims and other intellectual
property rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection technology must
be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
SERIAL NUMBER: The serial number is found
on
the back of
this unit. This number is
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
2
___________________________________
___________________________________
to
Table of Contents
SafetyPrecautions...............................2
.28-30
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD....................28
TableofContents................................3
GeneralFeatures..........................28-29
BeforeUse...................................4-5
PlayableDiscs................................4
MovingtoanotherTITLE....................28
.28
MovingtoanotherCHAPTER/TRACK.
Precautions..................................5
Search.................................28
Introduction
.
NotesonDiscs...............................5
.
.
.
.
.
.
.
.
Still Picture and
.
.
.
.
.
.
Frame-by-Frame Playback
.
.
.
.
.
.
.
.
.
.
.
29
AboutSymbols...............................5
SlowMotion.............................29
FrontPanel.....................................6
RearPanel.....................................7
Repeat.................................29
RepeatA-B..............................29
RemoteControl.................................8
TimeSearch.............................29
DisplayWindow.................................9
LastSceneMemory.......................29
Zoom..................................30
Preparation
MarkerSearch...........................30
Connections................................10-14
ConnectingtoaTV...........................10
ConnectingtoAntenna........................11
.12
ConnectingtoAuxiliaryEquipment
.12
ConnectingtoOptionalEquipment
SpeakerSystemConnection....................13
SpeakerPositioning...........................14
BeforeOperation.............................15-24
VolumeAdjustment...........................15
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SpecialDVDFeatures.........................30
TitleMenu...............................30
DiscMenu...............................30
.
.
MUTE.....................................15
SoundQualityAdjustment......................15
CameraAngle............................30
ChangingtheAudioLanguage................30
ChangingtheAudioChannel.................30
Subtitle.................................30
Operation with Audio CD and MP3/WMA Disc
PlayinganAudioCDandMP3/WMADisc
.
.
.
.
.
.
.
.
.
.
31-32
.
.
.
.
.31
Pause..................................32
.15
MovingtoanotherTrack....................32
RepeatTrack/All/Off......................32
15
Search.................................32
DEMO.....................................15
OperationwithJPEGDisc.......................33
ViewingaJPEGdisc..........................33
SURROUND................................15
XDSS(ExtremeDynamicSoundSystem).
OAO (Orientation Acoustic Optimizer) ON/OFF
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SettingtheClock.............................16
SleepTimerFunction..........................16
UsingMicrophone............................16
TimerFunction...............................17
Mini
Glossary
for Audio Stream & Surround Mode
.
.
.
.
18
SoundMode................................18
GeneralExplanation..........................19
On-ScreenDisplay............................19
InitialSettings.............................20-24
GeneralOperation.........................20
LANGUAGE.............................20
DISPLAY................................21
AUDIO...............................22-23
OTHERS................................23
LOCK(ParentalControl)....................24
SlideShow..............................33
MovingtoanotherFile......................33
StillPicture..............................33
ProgrammedPlayback..........................34
RepeatProgrammedTracks.................34
.34
ErasingaTrackfromProgramList.
.34
ErasingtheCompleteProgramList.
OperationwithDivXDisc........................35
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Reference
Troubleshooting................................36
LanguageCodeList.............................37
CountryCodeList..............................38
Specifications.................................39
Operation
OperationwithRADIO........................25-26
Presettingtheradiostations.....................25
Listeningtotheradio..........................25
RDSFunction-OPTIONAL.....................26
About the
symbols
Indicates hazards
other material
for instructions
likely
damage.
to
cause
harm to the unit itself
AboutRDS..............................26
ProgrammeSearch(PTY)...................26
OperationwithTAPE............................27
BasicPlayback..............................27
ToStopPlay................................27
TapeCounterReset..........................27
ToPlayRewindorFastForward.................27
Dubbing....................................27
Recording....................................27
BasicSetting................................27
27
Recording from Radio, CD or Auxiliary source
.27
CDtoTapeSynchronizedRecording.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
.
3
or
INTRODUC
Before Use
Playable
Discs
ote
When
DVD
(8cm/12cmdisc)
Video CD
(VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
addition, this unit can play a DVD±R, DVD±RW,
SVCD, and CD-R or CD-RW that contains audio titles,
MP3, WMA, JPEG or DivX files.
on
DTS-encoded CDs
CDs, excessive audio level
may be heard from the analog stereo output. To avoid
possible damage to the audio system, turn down the
volume before playing back such discs, adjust the vol-
playing
DTS-encoded
gradually, and keep the volume level low. To enjoy
DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be
connected to the digital output of the unit.
ume
In
Disc-related terms
Title
(DVD only)
The main film content
or
accompanying
feature content
additional feature content, or music album.
Each title is assigned a title reference number
or
Notes
--
--
--
Depending
the conditions of the
recording equipment or the CD-R/RW (or DVD±R/RW) disc itself,
some CD-R/RW (or DVD±R/RW) discs cannot be
played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
on
you to locate it
on
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
other functions may be added.
Refer also to the instructions supplied with the DVDs
or
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
Regional
code of the DVD
player
(Video
Sections of
audio
or an
enabling
On
can
number,
you to locate the track you want.
of video CDs
are
two
DVD discs indicates
player
play
5
unit can play only DVD discs labeled "5" or
"ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVD discs may not have a region code label even
though their playback is prohibited by area limits.
type
of
track
you to locate the scene you want.
A scene is composed of one or several tracks.
There
which
a
video CD
video CD with PBC
back of
some
on a
and DVDs
player is designed and manufactured for playregion "5" encoded DVD software. The region
the labels of
only)
a picture or a musical piece
CD. Each track is assigned
(Playback control) functions,
moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
Types
on
CD and audio CD
Scene
This DVD
code
easily.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
Track
Notes
enabling
those discs. This
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
PBC
with the
functions, or other
typical computer-like operations. Moreover, still pictures
of
high
system via
resolution
menus, search
can
be
played
if
they
are
included in
the disc.
Video CDs not
equipped
with PBC
(Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
4
Before Use
(Cont'd)
After
the unit
Handling
When
shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
near
radio,
or
turn off the
or
use
volatile
such
liquids,
leave marks
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sunthere may be a considerable
increase inside the car.
light,
as
Cleaning
temperature
discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the center out.
on
a
plastic products in
long period of time. They will
or
the surface.
Do not
To clean the cabinet
soft, dry cloth. If the surfaces
soft cloth
use
thinner,
or
are
moistened with
lightly
solution. Do not
benzine,
case.
the unit
Cleaning
use a
store the disc in its
insecticide spray,
as
the unit. Do not leave rubber
a
playing,
the exterior surfaces clean
contact with the unit for
Use
discs
Storing
Precautions
a
extremely dirty,
mild detergent
strong solvents such
as
these
as
might damage
alcohol,
the surface
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for older
About
records.
vinyl
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Handling
Discs
discs
Do not touch the
Hold the disc
get
on
playback
by the edges
side of the disc.
so
that
fingerprints
the surface.
Do not stick paper
or
tape
on
the disc.
will not
on
DVD
VCD
Video CDs
CD
Audio CDs
MP3
MP3 disc
WMA
WMA disc
JPEG
JPEG disc
screen
for instructions
following symbol is
represented by the symbol.
one
to the disc
DVD
DivX
during operation.
explained in this owner's
that specific DVD video disc.
symbols
A section whose title has
applicable only
Notes
symbol display
of the
DivX disc
5
INTRODUC
Front Panel
1
17
2
16
3
4
15
5
14
67
13
12
8
11
9
10
1.
DISC TRAY
2.
POWER
3.
4.
?
RECORD/ RECORD PAUSE
?
CD SEARCH
DISPLAY WINDOW
?
AUTO TUNING
FUNCTION SELECT buttons
?
PRESET
?
REVERSE PLAY
?
STOP
(
10.
STANDBY/ON)
button
(TUNER, TAPE, DVD/CD, AUX)
MULTI JOG DIAL
5.
?
?
?
MANUAL TUNING
CD SKIP
11.?PLAY
(./>)
?
CLOCK ADJUST
(CD [])/ COUNTER RESET
(COUNT. RESET)/ RDS (OPTIONAL) button
7.
HEADPHONE SOCKET
8.
Z PUSH EJECT
9.
?
?
?
6
PHONES)
6.3mm
position (TAPE 1)
EQUALIZER
(NOR-DUBB.)/
RECORDING (CD SYNC.)
(EQ)
XDSS button
?
SURROUND
?
HIGH DUBBING
?
TIMER button
(SURR.)
CLOCK button
(HI-DUBB.)
button
(G)
buttons
button
DEMO button
position (TAPE 2)
(MIC VOL.)
(MIC1, MIC2)
:
:
OPTIONAL
OPTIONAL
15. VOLUME knob
16.
?
CD OPEN/CLOSE button
?
DISC SKIP button
?
DISC DIRECT PLAY buttons
?
PROGRAM/MEMORY button
?
MODE/RIF button
button
17.
button
PLAY
MODE button
14. MIC JACKS
button
OAO button
?
?
(
-
buttons
buttons
(F)/
13. MIC VOLUME KNOB
NORMAL DUBBING
CD SYNCHRO
(x)
(-/+)
button
buttons
12. Z PUSH EJECT
SET/ CD PAUSE
6.
(-/+)
(FF/GG)
(z/[])
(Z OPEN/CLOSE)
(DISC1, DISC2, DISC3)
Rear Panel
INTRODUC
1
8
2
7
SUB
WOOFER
3
CENTR
4
REAR
REAR
FRONT
FRONT
L
6
R
L
R
5
1.
COMPONENT VIDEO OUT/ PROGRESSIVE SCAN
(Y
Pb
Pr)
Jack
2.
VIDEO OUT Jack
3.
?
S-VIDEO OUT Jack
?
OPTICAL OUT Jack
4.
VOLTAGE SELECTOR
5.
POWER CORD
6.
SPEAKER Connector
7.
?
AUXILIARY INPUT Sockets
?
SUB WOOFER Connector
8.
:
(AUX IN)
ANTENNA Connector
OPTIONAL
7
Remote Control
POWER
MUTE
19
1
TUNER/BAND
DVD/CD
1.
POWER button
2.
FUNCTION SELECT buttons
3.
(TUNER/BAND, DVD/CD, AUX)
NUMERIC buttons (0-9)
4.
TAPE FUNCTION buttons
AUX
2
-
-
3
-
-
-
-
4
1-TAPE-2
SET UP
PRESET
+
TUN.
/ENTER
7
MENU
89
RECORD/ RECORD PAUSE
TAPE STOP
?
ARROW buttons
menu
PROG./MEMO.
/
(
highlighting
in
PRESET
(
?
TUNING
(-/+) [TUN. (
/
a
selection
/
SELECT/ENTER button
8.
MENU button
)]
on
GUI
screen.)
buttons
the MENU button to
included
on a
buttons
)
7.
(Use
//)
screen, TITLE and MENU
?
TITLE
PRESET
SCAN
use
(z/[])
(x)
6.
17
(FF/GG)
TAPE 1/2 SELECT buttons
+
SELECT
6
(G)
SET UP button
DISPLAY
(F: optional)
REWIND/ FAST FORWARD PLAY
(For
5
TUN.
PLAY
5.
18
-
REVERSE PLAY
DVD video
display
discs.)
the
menu screen
-
SCAN
9.
(FF/GG)/
SLOW
(t/T)/SKIP (./>)
buttons
REPEAT
SLOW
16
10
REPEAT A-B
SKIP
10.
PROG./MEMO./ REPEAT/ REPEAT A-B buttons
11
S TO P
.
12.
STOP
PAUSE/STEP
PLAY
ZOOM buttons
D.SKIP
11
15
EQ
OAO
SURR.
(x)/ PAUSE([])/ STEP/ PLAY (G) buttons
EQUALIZER (EQ)/ OAO/ SOUND/ AUDIO/CLEAR/
XDSS
13. SLEEP/ ECHO buttons
14. SURROUND
XDSS/ SUBTITLE
(SURR.)/
(S-TITLE)
RETURN / MARKER/ SEARCH buttons
SOUND
AUDIO
S-TITLE
14
RETURN
12
CLEAR
ZOOM
MARKER
15. DISC SKIP
(D.SKIP)
buttons
16. VOLUME -/+ buttons
SEARCH
17. TITLE button
SLEEP
(Use
ECHO
the TITLE button to
included
13
on
DVD video
display
discs.)
the title
screen
18. DISPLAY button
19. MUTE button
Remote Control
Remote control
Operation Range
Point the remote control at the remote
sensor
battery
and press
Detach the
the buttons.
Distance: About 23 ft
remote
Angle:
remote
installation
the
(7 m)
from the front of the
rear
battery
cover on
of the remote
trol, and insert
two R03
AAA) batteries with
aligned correctly.
sensor
About 30° in each direction of the front of the
con-
(size
and
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
8
Display
Window
2
1
1
3
7
4
6
5
1.
LEVEL METER indicator
2.
?
3.
?
RDS Data
DISC NUMBER indicator
?
MUTE indicator
?
DISC TYPE indicator
?
?
PLAY/ PAUSE indicator
?
LEFT FRONT SPEAKER indicator
?
RIGHT FRONT SPEAKER indicator
?
RIGHT SURROUND SPEAKER indicator
?
LEFT SURROUND SPEAKER indicator
?
SUB WOOFER indicator
?
CENTER SPEAKER indicator
?
DISC TYPE indicator
?
SURROUND
?
6.
(MP3/DVD/CD/VCD)
(L)
(R)
(RS)
(LS)
(SUB)
(C)
(WMA)
(SURR,)/
OAO indicator
ANGLE indicator
7.
type indicators
:
OPTIONAL
AUDIO CHANNEL indicator
?
ECHO indicator
?
PBC indicator
?
PCM indicator
?
MIC indicator
?
HIGH DUBBING indicators
?
SLEEP indicator
?
XDSS indicator
?
CD SYNCHRO RECORDING indicator
?
NORMAL DUBBING indicator
?
TAPE 1/2 SELECT indicator
?
REPEAT A-B indicator
?
PLAY MODE indicator
?
DOLBY DIGITAL/ DOLBY PRO LOGIC II/ DTS
?
TAPE PLAY DIRECTION indicator
indicator
4.
5.
?
PROGRAM
?
CD MUSIC CALENDAR indicator
?
CD MUSIC CALENDAR OVER indicator
?
TITLE indicator
(PROG.)
indicator
?
RECORD/ RECORD PAUSE indicator
?
CHAPTER/ TRACK indicator
?
REPEAT indicator
?
FM STEREO RECEIVING indicator
?
MONO indicator
?
MEMORY
?
DOWNMIX indicator
(MEMO)
indicator
9
INTRODUC
Connections
Connecting
Make
the
to a TV
of the
following connections, depending
capabilities of your existing equipment.
one
ips
Depending
on
Progressive Scan (ColorStream
If your television is
your TV and other equipment you wish
to connect, there are various ways you could connect
the unit. Use one of the connections described
below.
best connections.
connection
high-definition or "digital ready"
television, you may take advantage of the unit's progressive scan output for the highest video resolution
possible.
If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the unit.
on
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
pro)
a
Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN
jacks
the
on
jacks from the unit to
TV using an optional
the
Y
corresponding
Pb Pr cable (C).
Caution
--
Make
sure
the unit is connected
Select the correct AV
--
directly
to the TV.
ote
your TV.
Do not connect your unit to TV via your VCR. The
DVD image could be distorted by the copy protection
input
on
--
Set the
Progressive to "On" on the Setup
progressive signal, see page 21.
system.
Rear of TV
Video connection
Connect the VIDEO OUT
VIDEO IN
jack
on
the TV
jack from
using the
the unit to the
video cable
supplied
(V).
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Y
S-Video connection
Connect the S-VIDEO OUT
the unit to the S-
VIDEO IN
S-Video cable
jack
Component
on
the TV
Video
jack on
using the
(Color Stream )
Pr
Pb
VIDEO
IN
S-VIDEO
IN
L
(S).
connection
Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN
jacks
10
on
the
jacks from the
TV using an Y
unit to the
Pb Pr
corresponding
cable (C).
in
C
V
S
menu
for
in
Connections
Connecting
to Antenna
Connect the
-
-
Connect
supplied FM/AM antennas for listening to the radio.
the AM loop antenna to the AM antenna connector.
Connect the FM wire antenna to the FM antenna connector.
PREATION
otes
To
prevent noise pickup, keep the AM loop
Be
sure
After
antenna away from the unit and other
fully extend the FM wire antenna.
connecting the FM wire antenna, keep it
component.
to
as
horizontal
as
possible.
11
Connections
Connecting
You
1
2
to
can use
VCR
Connect
a
or
VCR
Auxiliary Equipment
other unit connected to the AUX connector.
or
auxiliary device,
Select AUX function
pressing
etc to the AUX connector.
the AUX button
on
the unit
or
the remote control.
VCR
(or Auxiliary Device, etc)
IN
OUT
VIDEO
AUDIO
(L)
AUDIO
(R)
To AUDIO OUT
To AUDIO IN
Connecting
Connecting to
equipped with
to
an
a
Optional Equipment
amplifier equipped
with two channel
multi-channel decoder
digital stereo (PCM)
(Dolby DigitalTM, MPEG 2 or DTS)
Connect the OPTICAL OUT connector of this unit to the
corresponding
in
jack
or
on
to
your
an
Audio/ Video receiver
Amplifier
or
Receiver.
ote
If the audio format of the
strong, distorted sound
To
12
see
digital output
or no
does not match the
capabilities
of your
unit, the receiver will produce
sound at all.
the audio format of the current unit
in the On-Screen
Display,
press AUDIO.
a
Connections
Speaker System
Connection
Connect the
cords. To
speakers using the supplied speaker cords by matching the colors of the terminals and those
obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.).
of the
PREATION
If you feel lack of bass
frequency
Connect
an
active sub woofer
to the SUB WOOFER OUT
using a monaural
cord (not supplied).
connector
audio
UB
OFE
C NTER
REAR
REAR
FRONT
FRONT
L
R
L
R
otes
Be
are
sure
to match the
speaker
cord to the
appropriate
terminal
on
the
components:
+
to
+
and
--
to
--.
If the cords
reversed, the sound will be distorted and will lack base.
If you use front
the speakers.
speakers
with low maximum
input rating, adjust
the volume
carefully
to avoid excessive
output
on
13
Connections
Speaker Positioning
In the
of normal
case
position
use
the 6
speakers (2
front
speakers,
center
speaker,
2
rear
speakers
and sub-
woofer).
If you want to
?
?
play
the excellent bass sound
or
Dolby Digital surround,
you should connect
a
subwoofer.
Front
speakers
According to your listening position set up
interval between speakers to 45 degree.
Center
the
speakers
for
equal
distance. And
by hearing position
set up the
speaker
It is ideal that the center
speakers
and front
speakers
are same
height.
But
normally place
it above
or
below the
television.
?
?
Rear
speakers
Place left and right behind the listening area.
These speakers recreate sound motion and atmosphere required for surround playback. For best results, do not
install the rear speakers too far behind the listening position and install them at or above the level of the listener's
ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse the sound.
In the case of a smaller room size, if the audience is near to the rear wall set the rear speakers opposite each
other, and set the rear speakers above 60-90cm than the listener's ears.
Subwoofer
This
can
be
placed
in any front
position.
Center
Speaker
Subwoofer
Front
Front
Speaker
(Left)
Speaker
(Right)
Rear
Speaker
(Left)
Rear
Speaker
(Right)
Speaker Positioning Example
14
Before
Volume
?Turn
SURROUND
Adjustment
VOLUME knob clockwise to increase the sound
level,
?
Operation
or
You
counterclockwise to decrease it.
Press VOLUME
VOLUME
+
to increase the sound
to decrease it
-
on
To activate surround mode
level,
or use
choose
can
one
Press SURROUND
SURROUND ON
the remote control.
between 2 fixed sound
(SURR.)
impressions.
button.
SURROUND OFF
ote
MUTE
This function is
only
available to the "BYPASS" sound mode.
Press MUTE to turn off the
restore. You
answer
play
the
mute
telephone,
"
"
to
indicator flashes in the dis-
window.
Sound
?To
can
sound, press again to
your unit in order, for example,
can
Select
a
-
impressions.
desired sound mode
FLAT
:
Linear
ROCK
:
More
POP
:
CLASSIC
:
The "XDSS ON" indicator
lights up.
To cancel it press XDSS again.
The "XDSS OFF" indicator lights up.
Quality Adjustment
choose between 4 fixed sound
(Extreme Dynamic Sound System)
Press XDSS to reinforce treble and bass.
-
activate stereo sound
You
XDSS
using the EQUALIZER (EQ).
frequency response
bass, more treble
Less bass, less treble
OAO
(Orientation
Press OAO to reinforce the bass sound.
The "OAO ON" indicator
To cancel it press
The "OAO OFF"
-
?
Headphone
Connect
a
Optimizer)
ON/OFF
-
For orchestral music
Acoustic
lights up.
XDSS again.
indicator lights up.
Jack
stereo
headphone plug ( 6.3mm)
into the
headphone jack.
The speakers are automatically disconnected
you plug in the headphones (not supplied).
when
DEMO
Press DEMO in power off state to demonstrate the
function in the display window.
To cancel
it, press POWER
or
DEMO
demonstration in power-on status you
by using the other buttons.
again. During
can
cancel it
15
PREATION
Before
Setting
Operation
the Clock
Using Microphone
You
1
Press CLOCK.
requires setting, press and
for more than 2 seconds.)
The hours display begins to blink.
(If
the clock
hold CLOCK
-
Select either the 12 hour
2. cycle by turning
(12HR)
cycle
or
the 24 hour
(24HR)
Play
source
by connecting
microphone
will be shown in the
a
OPTIONAL
a
to the MIC socket.
display
window.
music you want.
Sing along with the accompaniment.
Adjust the microphone volume by turning
MIC
VOLUME KNOB.
cycle.
Use MULTI JOG DIAL to set the current hour.
4
1
""
3
Press SET to confirm the selected hour
3
Connect your
2
MULTI JOG DIAL.
or
sing to a music
microphone to the unit.
can
:
For your reference
You can record during
Refer to the
using microphone.
"Recording" explanation section.
otes
5
Press SET.
When not
using
the
knob to minimum
Press SET and the correct time is shown
on
7
display.
8
Press CLOCK at any time to show the time
the display, for about 5 seconds.
Sleep
1
To
on
sleep timer is set, the unit automatically
the specified time has elapsed.
specify
the time
delay
turns
before the power is
window you can see SLEEP 180 for
about 5 seconds. This means that the system turns
off
display
automatically
after 180 minutes.
Each time you press SLEEP the setting changes
in the following order.
SLEEP 180 →150 → 120 →90→80→70 → 60→ 50 → 40 →
30 → 20 →10 → OFF→SLEEP 180...
2
3
To
c heck
the
remaining
time until the power is
turned off.
function is active press SLEEP
The time remaining until the unit turns off is
While the
sleep
briefly.
displayed
for about 5 seconds.
ote
If you press SLEEP while the
the SLEEP time is reset.
sleep
To cancel
setting
Sleep
Timer
time is
displayed,
If you wish to stop the function, press the SLEEP button
repeatedly until "SLEEP 10 appears, and then press
"
SLEEP
display.
16
once
again
after "SLEEP 10
remove
Adjust ECHO
You
give an
microphones.
can
Press the ECHO
Volume
echo effect to the sound from the
repeatedly.
ECHO-OFF→ECHO-1 →ECHO-2 →ECHO-3
turned off, press SLEEP.
In the
turn off the MIC and
"
shows
on
the
the
may be distorted. In this case, turn the MIC volume
control toward minimum.
To
When the
off after
the
Timer Function
set the MIC volume
microphone from the MIC socket.
If the microphone is set too near the speaker, a
howling sound may be produced. In this case, move
the microphone away from the speaker or decrease
the sound level by using the MIC volume control.
If sound through the microphone is extremely loud, it
Use MULTI JOG DIAL to set current minutes.
6.
or
microphone,
Before
Operation
Timer Function
With the TIMER function you can have the radio reception
and recording, CD or tape playing turned on and off at
the time desired.
1
Press CLOCK to check the current time.
2
Press
setting mode.
display window in
turn.
previous
press and hold the
2 seconds.
The
-
"
3
4
previous
memorized TIMER
TIMER button
setting,
memorized timer
setting
TIMER" indicators appear in the
for
more
than
Time and
on
display.
Press SET when the desired function flashes.
1.
When you select TUNER
a.
display
window
function,
alternately
for
about 3 seconds.
'PLAY' indicator
:
TUNER
'REC' indicator
:
TUNER
Set the turn off hour time
9
10
11
12
13
14
minutes
Set the turn off minutes
Adjust
the volume level
appears in the display window and the
timer setting has been completed.
Turn the
system off.
The selected timer functions
To cancel
or
on
and off at the
seconds in the
window.
or
window and then
automatically
preset times.
cancel. You
you can select
also check the timer
can
pressed
status.
or
check the
repeatedly
To cancel the
2. When you select CD or TAPE function,
'ON TIME' indicator appears for about 0.5
are
check the timer
To activate
disappears.
MULTI JOG
""
and press SET.
'ON TIME' indicator appears for about 0.5
window and then
turning
Press SET.
switched
button
MULTI JOG
DIAL.
15
setting
turning
Press SET.
the timer set
panel
MULTI JOG
DIAL.
memorized preset
number with MULTI JOG DIAL on the front
previous
turning
Press SET.
Select the
display
on
DIAL.
Each time the TIMER button is
seconds in the
MULTI JOG
time.
function flashes.
display
turning
Press SET to confirm the turn
play only
play and recording
b. Press SET when the desired
c.
minutes time
DIAL.
'PLAY' and 'REC' indicator flash in
the
on
hour time.
disappears.
TIMER to enter the timer
For your reference
If you want to correct the
Set the turn
on
'OFF TIME' indicator appears for about 0.5
seconds in the display window and then
clock, timer function doesn't work.
TUNER-CD-TAPE flash in the
7
8
For your reference
If you don't set
6
Press SET to confirm the turn
repeatedly
so
so
that
timer, press the TIMER
"
"
appears in the
display
TIMER, press the TIMER button
that
"
"
disappears
from the
display
window.
disappears.
5
Set the turn
on
hour
turning
MULTI JOG DIAL.
17
PREATION
Before
Mini
Operation
Glossary
for Audio Stream &
Sound Mode
Surround mode
You
DVD
VCD
CD
enjoy surround sound simply by selecting one
pre-programmed sound fields according to the
can
of the
program you want to listen to.
Allows you to
enjoy 5.1(or 6)
discrete channels of
high
quality digital audio from DTS program sources such as
discs, DVD and compact discs, etc.bearing the trademark.
When DVD is inserted
DTS
pressing the AUDIO button on the remote control during
playback. Although the DVD contents differ from disc to
disc, the following explains the basic operation when
Digital
transparent
Surround delivers up to 6 channels of
audio(which means identical to the original
and results in
masters)
exceptional clarity throughout a
true 360 degree sound field. "DTS" and "DTS Digital
Surround" are registered trademarks of Digital Theater
Systems, Inc.
You
change
can
the
Digital
Audio
mode
After you select 2 channel
a)
3 ENG
AUDIO
) by pressing
button repeatedly.
D
2CH
(For example
Dolby
Pro
Logic
or
PL ll
(For example
1 ENG
D
5.1 CH
or
DTS
) by pressing
5.1 CH
"
-"
-
AUDIO
indicator will be
"BYPASS" indicator
button, press SOUND button.
displayed on the TV screen.
will be only displayed on the display
window.
When Video CD is inserted
Each time you press SOUND button, the sound mode
of Video CD is changed on the display window as the
II creates five full-bandwidth
channels from two-channel
an
D
2CH
4 ENG
"
II
Dolby
After you select 5.1 channel
b)
2 ENG
button, press SOUND
The
"
by
this feature is used.
Bypass
Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital
mark, you
program source. If you play DVDs with
can enjoy even better sound quality, greater spatial accuracy, and improved dynamic range.
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and double-D symbol are trademarks
of Dolby Laboratories.
Output
advanced, high-purity
sources.
output
This is done
using
matrix surround decoder that
following
BYPASS
→
order.
→
STUDIO
CHURCH
CLUB
PL ll MOVIE
→
→
HALL
→
THEATER 1
BYPASS...
extracts the
without
spatial properties of the original recording
adding any new sounds or tonal colorations.
→
→
MOVIE mode:
The Movie mode is for
use
with stereo television
shows and all programs encoded in Dolby Surround.
The result is enhanced soundfield directionality that
approaches
the
quality
of discrete 5.1-channel sound.
the sound from the front left and
and subwoofer.
After you select the "Bypass" of sound mode by
pressing SOUND button, press AUDIO button.
The
Left, Right and Stereo of audio channel will be
displayed
on
the TV
screen.
When CD is inserted
Each time you press SOUND button, the sound mode
of Audio CD is changed on the display window as the
BYPASS
Outputs
ote
right speakers
following
BYPASS
→
order.
→
CHURCH
STUDIO
→
→
CLUB
PL ll MOVIE
→
→
HALL
→
THEATER 1
BYPASS...
For your reference
?
The unit memorizes the last mode
each
?
settings
for
individually.
You can identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labelled with the
logo.
Dolby Surround encoded programs are labelled with
the
logo.
DTS Digital Surround discs are marked with DTS.
source
-
-
-
ote
When you
the output
quency).
18
play sound
signals will
tracks with 96kHz
be converted to
sampling frequency,
48kHz (sampling fre-
Before
Operation
3
Caution:
Before
the remote
using
control, press the DVD/CD
button to select the device to be
General
This manual
operated.
or
gives
2
playback
status
Some items
Press
on
Temporary
the
Title
A-B
number).
For
some
setting
functions,
setting.
/
Repeat
title
Repeat
sequence
play
from this
prohibited
or
can
displayed on the TV
changed on the menu.
not available
be
Notes
Some discs may not
provide all of the features on the
on-screen display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
display operation
during playback.
to select
an
item.
highlighted.
DVD
Items
Function / Action using
Title Number
Shows the current title number and total number of titles /
1/3
Number
1/12
Time search
skips
Audio
language
and Digital Audio
Output mode
1 ENG
D
5.1 CH
ABC
1 ENG
/
Shows the current
chapters
/
skips
number and total number of
chapter
to the desired
elapsed playing
Sound
Selection Method
/
,
chapter
number.
time / searches
/
,
by elapsed
Shows the current subtitle
language,
number / changes
language
/
changes
or
/or
the
AUDIO
the set-
/or
ting.
angles
Numbers,
Numbers, SELECT/ENTER
Shows the current audio soundtrack
encoding method,
setting.
or
SELECT/ENTER
time.
and channel
Numbers,
SELECT/ENTER
S-TITLE
Shows the current
1/3
to select item
to the desired title number.
Shows the
0:20:09
Angle
point
the disc.
Example: On-Screen Display during playing
language
PREATION
Feedback Field Icons
Resume
be
can
The selected item will be
Subtitle
item.
an
Display
Press DISPLAY
Chapter
of
be also be used for
press SELECT/ENTER to execute the
basic instructions for
is not available
On-screen
1
can
setting
Explanation
On-Screen
screen.
title
(e.g.,
the
change
The number buttons
Action
General
to
or
numbers
operating
unit. Some DVDs require specific operation or allow
only limited operation during playback.
When this occurs, the symbol
appears on the TV
screen, indicating that the operation is not permitted by
the unit
Press
/
angle number
changes the angle.
Shows the current sound mode /
Bypass
and total number of
changes
the
/
setting.
/or
SOUND
Example: On-Screen Display during playing VCD
Items
Function / Action using
Track Number
Shows the current track
1/3
Time
PBC On mode /
Shows the
0:20:09
Audio Channel
skips
/
to select item
number, total number of tracks and
to the desired track number.
elapsed playing
time
Selection Method
/
,
Numbers,
or
SELECT/ENTER
(display only).
--
Shows the audio channel /
changes
the audio channel.
Stereo
/or
AUDIO
Sound
Bypass
Shows the current sound mode /
changes
the
setting.
/or
SOUND
19
Before
Initial
Operation
LANGUAGE
Settings
the
By using
Setup
can
make various
menu, you
ments to items such as picture and sound. You
set
for the subtitles and the
language
among other things.
a
item,
To
see
For details
on
can
also
menu,
menu
OSD
English
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
and exit the Menu:
Press SETUP to
display
the
menu.
SETUP will take you back to initial
To go to the next level:
on
on
A second press of
screen.
Move
previous
level:
Select
a
language
for the
Setup
menu
1
Operation
Use
setup
2 press
The
audio),
Use
menu
/
screen
item,
/
/
Some items
disc
then
display.
as
well
as
alternate
setting for
setting(s).
the
option
to move to the third level.
to select the desired
require
or
setting
then
to confirm your selection.
additional steps.
PLAY to exit the
setup
DVD
was
language
Refers to the
original language
(disc
in which the
recorded.
Other: To select another language, press number but-
to select the second desired
Press SETUP
20
option
will be shown the current
4 press SELECT/ENTER
5
on-screen
you prefer for the audio track
subtitles, and the disc menu.
Original:
to select the desired
then press
Use
appears.
to move to the second level.
selected
3
Select the
Press SETUP.
The
and
the remote control.
Disc Audio / Subtitle / Menu
General
Select
OSD
the remote control.
To go back to the
Press
adjust-
pages 20 to 24.
display
Press
Setup
each Setup
LANGUAGE
menu.
tons to enter the
corresponding 4-digit number according to the language code list on page 37. If you enter
the wrong language code, press CLEAR on the remote
control.
Before
Operation
DISPLAY
Progressive Scan
DVD
DISPLAY
TV
16:9
Aspect
Display
Mode
Progressive
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On.
Widescreen
Scan
Off
To Turn ON
Move
TV
Aspect
a
16:9: Select when
component out of the DVD to the input of your
monitor/television, set your television or monitor to
Component Input.
1. Select
standard 4:3 TV is connected.
a
"Progressive
then press
16:9 wide TV is connected.
2. Select "On"
Display
Display
Mode
Mode
scan:
Connect
Select
DVD
4:3: Select when
progressive
DVD
setting
works
only
when the TV
Aspect
Scan"
on
the
using
/
buttons.
3. Press SELECT/ENTER to confirm your selection.
The confirm menu will appear.
DISPLAY
TV
wide
the
upper and
Panscan:
Automatically displays
the wide
picture
and cuts off the
portions
that do not fit.
the entire
screen
picture
with bands
Displays
lower portions
a
of the
on
menu
.
mode is set to "4:3".
Letterbox:
the DISPLAY
Off
Aspect
Display
On
Mode
Scan
Progressive
screen.
on
Prev.
4. When the confirm
menu
Move
appears
Select
on
your
screen
Cancel is
5.
/
highlighted as default. Use the
buttons to highlight Enter.
Pressing ENTER will set the player to Progressive
scan
mode.
Caution
Once the
setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to On in error, you must reset the unit.
1)
Remove any disc from the unit and close the disc
tray. See that "NO DISC" is displayed on the display
window
2)
Press and hold STOP
release it. The video
standard
visible
on a
for five seconds then
output will be restored
to the
picture will once again be
conventional analog TV or monitor.
setting,
and
(x)
a
21
PREATION
Before
Operation
AUDIO
5.1
Each DVD disc has
Set the
audio
variety of audio output options.
player's AUDIO options according to the type
system you
Speaker Setup
DVD
Select
a
of
use.
speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output.
AUDIO
Dolby Digital
Bitstream
DTS
Bitstream
Make the
MPEG
PCM
Sample Freq.
48 kHz
5.1
Select
Speaker Setup
DRC
On
Vocal
On
Speaker Setup
surround decoder.
AUDIO
Speaker
Front L
Size
Move
Dolby Digital
Select
with
a
DTS
Dolby Digital,
or
MPEG
decoder.
PCM
:
Select when connected to
a
tal stereo
MPEG
dB
Distance
0
m
Off
1.
Press SETUP. The
2.
Use
to
digiDolby Digital or
3.
to two-chan-
/
Use
Move
setup
Return
menu
ENTER
appears.
to select the AUDIO
option
then press
to the second level.
move
/
to select the
to
press
nel PCM audio.
move
to the
Speaker Setup option then
third level. "Select" is high-
lighted.
4.
Sample Freq. (Frequency)
DVD
made, this unit automatically converts any 96 kHz
signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
type of signal through without any
Check the documentation for your
amplifier
Press SELECT/ENTER and 5.1
menu
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. When this choice is
capabilities.
0
Select
two-channel
amplifier. DVDs encoded in
will be automatically downmixed
this unit passes each
further processing.
Volume
DVD
Bitstream: Select "Bitstream" if you connect the DVD
Player's DIGITAL OUT jack to an amplifier or other
equipment
Small
Test
/ DTS / MPEG
for the built-in 5.1 channel
following settings
to
verify
its
Speaker Setup
appears.
5.
Use
6.
Adjust options using
7.
Press SELECT/ENTER to confirm your selection.
Returns to the previous menu.
Speaker
Select
/
to select the desired
/
speaker.
//
buttons.
selection
speaker that you want to adjust. [Front speaker
(Front L), Center Speaker (Center),Front speaker (Front
R), Rear speaker (Rear R), Rear speaker (Rear L) or
Subwoofer (Woofer)]
a
,
Size
Press
?
?
?
22
a
mode.
or
(Large, Small or None)
speaker can be selected
to
"Small".
The size of the Subwoofer
or
?
to set
The size of the Front L/R
"Large"
?
/
can
be selected to
"Large"
"None".
Since the size of the Center and Rear L/R
speaker
are fixed to "Small", you can not change settings.
If you have connected the system to a speaker with low
frequency of 100Hz or below, select to "Large" the size
of the Front L/R speaker. The size of the Subwoofer is
selected to "None" automatically.
If you have connected the system to a speaker
without low frequency of 100Hz or below, select to
"Small" the size of the Front L/R speaker. The size of
the Subwoofer is selected to "Large" automatically. But
if you haven't connected to subwoofer, always select to
"Large" the size of Front L/R Speaker.
Before
Operation
Volume
Press
OTHERS
/
adjust the output
speaker. (-5dB 5dB)
to
level of the selected
OTHERS
~
PBC
On
DivX(R) Registration
Select
Distance
If you have connected speakers to your DVD Player,
setting the Distance lets the speakers know how far the
PREATION
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
listener at the
Press
/
time.
same
to
the Distance of the selected
adjust
PBC
speaker.
Set
Test
Adjust
of each
signals
speaker.
the volume to match the volume of test
memorized in the
Playback
Control
signals
Off:Video CDs with PBC
system.
DivX(R) Registration
You
adjust
tone, first
the volume
/
use
during operating
to select Volume
or
Off.
or
are
played according
are
played
to the
the test
the
same
way
as
Audio CDs.
to
FrontL→Center→FrontR→RearR →RearL→Woofer
can
to On
(PBC)
PBC.
(When the size of the Front L/R speaker is selected
"Large", the subwoofer (Woofer) is not available.)
You
VCD
On:Video CDs with PBC
Select "All" to test the
Select
Move
can
DivX
show the DivX DRM
Management) Registration
(Digital Right
code for your unit
only.
Speaker
/
buttons to select volume or
option then use
speaker, so that all speaker's volume is same from
listener's position.
Your
Please
the
the
registration
use
DivX(R)
code is
this code to
register this player with
Video On Demand service.
This will allow you to rent and
using
the
To l earn
XXXXXXXX
:
DivX(R)
more
purchase videos
Video On Demand format.
go to www.divx.com/vod
Dynamic Range Control (DRC)
With the DVD
program's soundtrack in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing dialog intelligibility. Set
format, you
can
hear
a
DRC to On for this effect.
The
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental
an
encrypt movie file.
Notes
If you rent the DivX VOD file, it has several
viewing limits as show below.
?
Display
the number which you
can
options
of
watch the file.
Notes
The DRC function works
depending
of
?
video,
Dynamic Range Compression
on
This rental video has 7 views left. A view
ends when you stop
recorded discs.
Dolby Digital
The level of
only during playback
may differ
or
turn
playback, play
off your player.
Do you want to
the DVD disc.
use one
a
different
of your 7 views
Yes
now
No
Vocal
?
Set Vocal to On
only
DVD is
The karaoke channels
mix into
playing.
a
when
a
The rental has been
expired.
multi-channel Karaoke
on
the disc will
This rental is
expired.
normal stereo sound.
?
Display
the authorization
This video
player
error.
is not authorized to
play this video.
23
Before
LOCK
Operation
Password
(Parental Control)
You
LOCK
Rating
Unlock
Password
****
Code
Country
can
2
Follow
control information
certain
scenes on
step
2
on
the LOCK
shown left
as
menu
then press
(Rating). "Change"
.
or
3
highlighted.
Enter the new 4-digit code, then press
SELECT/ENTER. Input it again to verify.
4
Press SETUP to exit the
that may not be suitable
of these discs contain parental
to the
complete
the disc. Movies and
menu.
Select
scenes
Many
that applies
change password.
"New" is
DVD
for children to view.
or
Select Password
If you
Some movies contain
enter
1
RU
Move
Rating
(Security Code)
disc
scenes are
or
to
rated
from 1 to 8, depending on the country. Some discs offer
more suitable scenes as an alternative.
forget
your Security Code
If you forget your security code you
the following steps:
1
Input
the
6-digit number
security code is
and the
2
Enter
a new
code
can
"210499"
on
clear it
the
using
setup
menu
cleared.
described above.
as
ote
The
to
control feature allows you to block access
below the rating you input, thereby preventing
parental
scenes
your children from being able to view material you
believe is unsuitable.
1
2
Select
"Rating"
on
the LOCK
appears on the TV screen,
and then press SETUP to move to the
(x)
menu.
Country
Code
DVD
.
Enter the code of the
To access the
Rating,
Password and
Code features, you must input the
security code you created.
If you have not
prompted to do
Input
Enter
entered
yet
4-digit code and
it again and press
a
a
Country
4-digit
security
code you
are
so.
a
If you make
press SELECT/ENTER.
SELECT/ENTER to verify.
mistake before
pressing
SELECT/ENTER, press CLEAR.
3
"
INPUT PASSWD
press STOP
setup
then press
menu
When
"
Select
rating
a
from 1 to 8
using
one
(1)
has the most restrictions
is the least restrictive.
If you select
and the disc
unlock, parental control is
plays
not active
in full.
ote
If you set a rating for the player, all disc scenes with
the same rating or lower are played. Higher rated
not
scenes are
available
on
played
unless
an
alternate
scene
is
the disc. The alternative must have the
rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc.
same
Press SELECT/ENTER to confirm your
4 selection, then press SETUP
24
rating
to exit the menu.
whose standards
disc, based
on
the list
chapter.
1
Select
2
Follow
3
Select the first character
using
Shift the
button and select the
press
"Country
Code"
on
the LOCK
menu
then
.
step 2
as
cursor
shown left
using
4 second character using
5
Unlock
used to rate the DVD video
in the reference
/
the
buttons.
Rating 1-8: Rating
and rating eight (8)
were
country/area
(Rating).
/
/
buttons.
buttons.
Press SELECT/ENTER to confirm your country
code selection.
Operation
with RADIO
Presetting
the radio stations
You
50 stations for FM and AM.
Before
ume
preset
can
sure
Press TUNER/BAND
1
FM
or
AM in the
Every time you press
changes alternately.
this
the
frequency
2
button, AM and FM
on
the front
indication starts to
panel
change.
front
buttons
(FF/GG)
) on the
/
panel or TUN. (
Scanning stops when the
Manual
3
on
the
4
a
station.
Tuning
PROG./MEMO.
on
on
the front
panel
or
the remote control.
Press PRESET F/G
control)
(or
PRESET
to select the
Press PROGRAM/MEMORY
PROG./MEMO.
Repeat steps
/
tunes in
Adjust the volume by rotating VOLUME knob
(or pressing VOLUME -/+ on the remote control)
repeatedly.
For manual
?
For
on
non-preset radio stations
tuning, see "Manual Tuning".
automatic tuning, see "Automatic Tuning".
on
function mode
?
the
on
the front
panel
(TAPE,
DVD/CD
or
or
select another
AUX).
noisy
Press MODE/RIF repeatedly so that
disappears in the display window. There will be no
stereo effect, but the reception will improve. Press
MODE/RIF again to restore the stereo effect.
"
preset number you
or
the remote control.
?
"
To
improve reception
Reposition the supplied
antennas.
2 to 5 to store other stations.
otes
Use MODE/RIF
Press and hold PROGRAM/MEMORY
for about two
to switch to
on
the front
For your reference
If all stations have already been
(x)
on
the front
To recall
While
by noise.
recording weak
AM
occurs, press MODE/RIF
broadcasts, if noises
once.
entered, "FULL"
message will appear in the display window for
moment and then a preset number will flash.
the
panel
seconds, "MEM RESET appears in the
STOP
(Radio Interference Filter) function
Mono reception if stereo reception is
distorted
"
display window and then press
panel, the stations are cleared.
change
button, the unit
For your reference
If a FM program is
To clear all memorized stations
To
the
want.
Press POWER to turn off the unit
The station is stored.
6
the
preset station.
?
want.
5
on
To turn the radio off
preset number will flash in the display window.
remote
remote
(or PRESET /
control) repeatedly to select
To listen to
remote control.
unit tunes in
Press PROGRAM/MEMORY
A
Press PRESET F/G
the next
until
Use the MULTI JOG DIAL.
3
select either
Tuning
Press the AUTO TUNING
-
FM in the
preset station you
otes
Automatic
or
Each time you press this
Turn the MULTI JOG DIAL
2
AM
(or TUNER) to
display window.
The last received station is tuned in.
to show either
(or TUNER)
display window.
to the radio
Press TUNER/BAND
1
that you have turned the voldown to the minimum level.
tuning,
make
Listening
preset number, follow the steps
a
4-5
.
preset numbers
Press and hold PRESET F/G (or PRESET
/
on the
remote control) until the desired preset number appears
or press the button repeatedly.
25
OPERATION
with RADIO
Operation
RDS Function
Programme Search (PTY)
OPTIONAL
-
A
About RDS
This unit is
equipped with RDS (Radio Data System),
which brings a wide range of information from FM radio.
RDS is a system for transmitting station call signs or
network information, a description of station programme
type text message about the station or specifics of
ability to encode broadcasts with Programme Type (PTY) codes that indicate
the type of material being broadcast. The following list
major
benefit of RDS is its
shows the abbreviations used to indicate each PTY
along
with
an
explanation
of the PTY.
musical selection and the correct time.
RDS
Tuning
When
containing RDS data is tuned in, the
unit will automatically display the station's call sign and
the RDS indicator will light in the Display Window as
well as indicators for the programme type recognition
(PTY), Radio Text (RT), Clock Time (CT) and RDS
services programme (PS) if transmitted by the station.
RDS
FM station
a
Display Options
The RDS
system is capable of transmitting
a
wide
of information in addition to the initial call
variety
that appears when
RDS operation the
a
broadcast network
or
front
panel
data
types
station is first tuned. In normal
will indicate the station name,
call letters. Pressing RDS on the
display
enables you to cycle
in the sequence:
FREQUENCY
(PS
PTY
sign
PTY
the various
through
RT
CT)
(Programme type recognition)-
The programme type is shown on the display window.
RT (Radio text recognition)- The radio station's
displayed on the display window.
(Time controlled by the channel)- Enable
name
CT
is
unit to receive the actual time and show it
on
the
the
display window.
PS (Programme Service name)- The programme
title is displayed on the display window.
You may search for a specific
by following these steps:
ote
Some RDS stations may not choose to include some of
these additional features. If the data required for the
selected mode is not
Window will show
a
PS NONE message.
being transmitted,
PTY
the
Display
NONE, RT NONE, CT NONE,
1
2
Press TUNER
mode.
Select
Programme Type (PTY)
(or TUNER/BAND)
to select FM
desired station by turning
MULTI JOG DIAL.
When the RDS transmission is received, the
display shows the program service name (PS) after
a
RDS indicator appears.
3
Press the RDS to select PTY mode.
4
To search for
a
different PTY, press the PRESET
while the last PTY in use is still
scroll
through
to
the list of available PTY types.
When the PTY is
5 within
displayed
/
selected,
turn MULTI JOG DIAL
5 seconds.
The unit will go into an automatic search mode and
attempt to find the next station with acceptable
signal strength
26
that matches the desired PTY
type.
with TAPE
Operation
Basic
Press TAPE1-2
1
2
3
To
Playback
"
(or TAPE)
("NO
TAPE
Open
cassette TAPE1-2
appears in the
PUSH EJECT
Insert
to select
one or
Press
tape function.
to the
STOP(
)
Tape Counter
position.
panel or TAPE STOP(
during playback.
the front
on
the remote control
on
display window.)
by pushing
Stop Play
)
Reset
Press COUNT. RESET
two cassettes with the
tape side
the bottom and then close the TAPE 1
to
(and/or 2)
Playing
during playback.
"TA P -1 (or 2) 0000
time appears
"
in
OPERATION
display
window.
door.
4
To
Press G (or F: OPTIONAL).
Rewind
After press FF/GG
AUTO STOP DECK (TAPE 1/2)
After auto stop deck plays front side of cassette, the unit
stops automatically.
AUTO REVERSE DECK (TAPE
You
Play
2)
select direction of the cassette you want
pressing PLAY MODE.
can
Pressing
:optional)
or
After the cassette of TAPE 1
Once
plays
front and
reverse
or
2
2
side,
or on
the
during playback, press G (or F
the tape position you want.
at
Press TAPE1-2
1
plays front or reverse (backward
play) side, stops automatically.
-
panel
Dubbing
by
After the cassette of TAPE 1
the front
remote control
Function
Display
on
Fast Forward
This function shows how to record from
OPTIONAL
:
or
2
To
tape
to
tape.
(or TAPE).
?
Cassette TAPE 1- Insert the
?
Cassette TAPE 2- Insert
a
playback tape
blank
tape
to dub.
to copy
on.
Press NOR-DUBB./HI-DUBB..
?
NORMAL DUBBING
?
HIGH DUBBING
-
-
Normal
Double
speed copying
speed copying
stop recording, press STOP (x).
stops automatically.
After the cassette of TAPE 1
Twice
plays
or
2
six times
reverse
repeatedly front and
side, stops automatically.
Recording
Basic
1
2
CD to
Setting
Press CD
Open
or
TUNER to select source.
the cassette deck TAPE 2 and insert
Press PLAY MODE
repeatedly
to set the
1
from
Press z/[]
on
Radio, CD
the front
or
panel
remote control.
"REC" flashes and holds the cassette in pause
mode.
2
Auxiliary source
or
Press G
The
(or F: OPTIONAL).
recording is begun.
To pause the
Press z/[].
To
Stop
Press
the
a
complete
and
a
cassette.
1
recording
direction.
Recording
The CD
a
blank cassette into the cassette compartment.
Set the recording direction : OPTIONAL
Tape Synchronized Recording
2
synchro recording function dubs
programmed titles automatically into
Press CD SYNC. in stop mode.
"REC" flashes and "CD SYNCHRO"
the
display
displays
CD
in
window.
The
synchronized recording is started
automatically after about 7 seconds.
otes
If you wish to record from the desired track, select
the desired track with MULTI JOG DIAL before
commencing CD synchro recording.
A function change is not possible during
recording.
recording
recording
STOP(x).
27
with DVD and Video CD
Operation
Playing
General Features
DVD and Video CD
a
Playback Setup
Turn
on
the TV and select the video
input
ote
source
Unless stated
connected to the unit.
Audio
the
1
2
system: Turn
input
on
the audio
use
the remote control. Some features may also be
available on the Setup menu.
system and select
connected to the unit.
source
otherwise, all operations described
Press Z OPEN/CLOSE button to open the disc
Moving
tray.
When
to another TITLE
disc has
a
more
than
one
title, you
another title. Press DISPLAY while
Load your chosen disc in the tray, with the
playback side facing down.
then the
appropriate
number
DVD
(0-9)
can move
playback
or use
/
is
to
stopped
to
move
to another title.
You
play any
stopped.
can
back is
Moving
DVD
Playing
?
one or
Place discs
trays
When
1 and 2.
rotate the
trays. Place the
next disc
on
tray
to
3.
Press Z OPEN/CLOSE button to close the tray.
Playback starts automatically. If playback does not
start, press PLAY. In some cases, the disc menu
might appear instead.
DVD
Use the
/
//
buttons to select the
on a
as
Press .
or
Use the number buttons to select the track you want
to view and press RETURN to return to the menu
operating procedures
may differ. Follow the instructions on the each menu
screen. You also may set PBC to Off (See "PBC" on
page
23).
If
parental control is set and the disc is not within the
rating settings you must input the password.
(See "Lock Menu" on page 24.)
DVDs may have a region code. Your player will not
play discs that have a region code different from your
player. The region code for this player is 5 (five).
Press
a
disc
directly
DISC 1, DISC 2
or
DISC 3
during playing
or
stopping.
When you press DISC 1,2 or 3 before playing a disc,
the unit will automatically start playing the selected disc.
28
than
track, you
one
chapter
can move
or a
to another
follows:
>
/
to select the chappress DISPLAY and press
ter/track icon. Then, input the chapter/track number or
player
DVD
or
will
2 Press FF
or
VCD
GG during playback.
now
go into SEARCH mode.
GG repeatedly to select the required
speed: mX2, mX4, mX8, mX16, mX100
(backward) or MX2, MX4, MX8, MX16,
MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8, mX16 (backward) or MX2, MX4,
MX8, MX16 (forward).
3 To exit SEARCH
Notes
To Select
one
more
briefly during playback to select
the next chapter/track or to return to the beginning of
the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
1 Press FF
menu screen.
and
disc has
than
more
the
VCD
--
title
chapter/track
The
--
a
Search
settings
play-
to another CHAPTER/TRACK
you want to view, then press SELECT/
ENTER to start. Press TITLE or MENU to return to
Menu
its number while
use/.
title/chapter
screen.
by inputting
VCD
disc has
Playing three discs
After placing two discs, press the DISC SKIP on
the front panel or D.SKIP on the remote control
?
3
on
two discs
title
mode, press PLAY.
Operation
with DVD and Video CD
General Features
Still Picture and
DVD
To
Frame-by-frame playback
VCD
playback.
The player
can
on
the remote control
will
PAUSE/STEP
repeatedly
on
by
3
the remote
DVD
the remote control
during
or
3 To return to normal
PLAY,
press PLAY.
playback
in
reverse
is not
applicable
for
Video CD.
DVD
play
a
VCD
title/chapter/all/track
during playback
on a
to select
disc.
a
desired
Repeat Chapter/Title/Off
Chapter: repeats the current chapter.
repeats the
does not
?
Off
-
-
current title.
play repeatedly.
Repeat
Track/All/Off
repeats the current track
repeats all the tracks on a disc.
:
:
screen.
time of the
elapsed playing
/
seconds, press
Search icon in the
to select the Time
display.
on-screen
The "-:--:--" appears in the Time Search box.
3 Within 10
seconds,
required
use
the number buttons to enter
start time. Enter
right
hours, minutes, and
sec-
in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
an
seconds, press SELECT/ENTER
:
does not
play repeatedly.
invalid
starts from the selected time
player
Memory
memorizes last
is viewed. The last
remove
you
on
to confirm
the disc. If you enter
time, playback will continue from the
Last Scene
This
DVD Video Discs
All
2 Within 10
Playback
repeat mode.
?
the
on-screen
the start time.
Press REPEAT
Track
on
appears
4 Within 10
Repeat
Video CDs
The
during playback.
onds from left to
Slow motion
?
display
the
ote
:
1 Press DISPLAY
at
playing
T to select the
-
Off
VCD
current disc.
required speed: t
1/2, t 1/4, t 1/8 or t 1/16 [(backward) DVD
only]orT1/2,T1/4,T1/8orT1/16
(forward).
?
DVD
The Time Search function allows you to start
any chosen time on the disc.
VCD
on
To cancel the sequence, press REPEAT A-B.
Time Search
will enter SLOW mode.
2 Use the t
Title:
"
The Time Search box shows the
player
point.
con-
playback.
?
title:
a
again at your chosen end point.
"A B" appears briefly on the TV screen, and the
repeat sequence begins.
mode, press PLAY.
1 Press PAUSE/STEP
?
sequence in
1 Press REPEAT A-B at your chosen starting
A
appears briefly on the TV screen.
now
Slow Motion
can
VCD
-
3 To exit still motion
You
a
DVD
2 Press REPEAT A-B
during
trol.
The
A-B
-
go into PAUSE mode.
advance the picture frame-by-frame
pressing
repeat
"
1 Press PAUSE/STEP
2 You
(continued)
Repeat
current
point.
DVD
scene
from the last disc that
remains in memory even if
the disc from the player or switch off the
scene
If you load a disc that has the
the scene is automatically recalled.
player.
scene
memorized,
ote
This
player
does not memorize the
you switch off the
disc.
player
before
scene
of
commencing
a
disc if
to
play
the
ote
--OnaVideoCDwithPBC,youmustsetPBCtoOffon
the setup menu to use the repeat function (See "PBC"
on page 23).
29
OPERATION
Operation
with DVD and Video CD
General Features
Zoom
VCD2.0
DVD
(continued)
during playback
or
still
playback
discs: Menus
to acti-
vate the Zoom function.
If you press ZOOM repeatedly, the
increases up to four steps.
magnification
100% size
400% size
(screen
size→ 1600% size
2 Use the
/
zoomed
fit
mode)
→
100% size
→
//
fit
(screen
buttons to
800%
appropriate
the
picture.
1 Press TITLE.
function may not work for
DVDs.
some
2 The
Marker Search
DVD
You
from
nine
points
To enter
1
start
playback
VCD2.0
VCD1.1
memorized
a
3 To
point. Up
to
be memorized.
can
mark, follow these steps.
a
a
menu, the
Otherwise, the disc
screen.
list
menu can
and subtitle
can
option.
DVD
Title Menu
ote
zoom
an
/
//
buttons to highlight your
Or, use the
selection, then press SELECT/ENTER.
If the current title has
The
number button to select
mode)
through
move
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
press the
level
→
DVD
the contents of DVD Video
Checking
VCD1.1
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
remove
menu
menu
will appear
the
on
may appear.
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
again.
DVD
Disc Menu
Press MENU.
During disc playback, press MARKER when
playback reaches the spot that you want to
The disc
menu
is
displayed.
memorize.
The Marker icon will appear
2
on
the TV
1 to enter up to nine Marker
Repeat step
Camera
briefly.
screen
points
on a
disc.
To Recall
1
disc
During
playback,
The MARKER SEARCH
2 Within 10
If the disc contains
scenes
angles, you can change
during playback.
Marked Scene
a
Angle
DVD
will appear
/
seconds, press
a
different
camera
1 Press DISPLAY and then press the
press SEARCH.
menu
to
recorded at different
on
to select
the
a
a
screen.
number that you want to recall.
angle
to select
angle.
The number of the current
Marker
/
camera
angle
appears
on
the
display
window.
2 Select
a
desired
angle pressing
the
/
buttons.
3 Press SELECT/ENTER.
will start from the Marked
Playback
4 To
remove
scene.
the MARKER SEARCH menu, press
Changing
different
1
a
During
Press
want to
3
disc
playback,
/
Changing
press SEARCH.
menu
will appear
on
the
to select the Marker number that you
erase.
Press CLEAR.
Repeat steps
2 and 3 to
erase
additional Marker
numbers.
5
To
to hear
a
remove
the Audio Channel
VCD
screen.
The Marker number will be erased from the list.
4
repeatedly during playback
audio language or audio track.
DVD
Marked Scene
The MARKER SEARCH
2
Language
Press AUDIO
SEARCH.
To clear
the Audio
Press AUDIO
different
repeatedly during playback to hear a
audio channel (STER., LEFT or RIGHT).
Subtitle
DVD
Press SUBTITLE
different subtitle
the MARKER SEARCH menu, press
repeatedly during playback
languages.
to
see
the
SEARCH.
ote
If
30
appears, the feature is not available
on
the disc.
with Audio CD and MP3/WMA Disc
Operation
Playing
Disc
Audio CD and MP3/WMA
an
MP3
CD
MP3 / WMA disc
limited
WMA
?
The unit
can
play
CD-ROM, CD-R,
MP3/WMA formatted
recordings
on
CD-RW discs.
or
compatibility
with this
player
is
follows:
as
within 32
48 kHz (MP3),
Sampling frequency:
within 24 48kHz (WMA)
Bit rate: within 32 320kbps (MP3),
40
192kbps (WMA)
The player cannot read an MP3/WMA file that has a
file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which cre-
-
?
-
-
?
Audio CD
Once you insert
an
audio CD
a menu
on
appears
the
?
TV
screen.
PLAY
Press
/
to select
SELECT/ENTER and
or
a
track then press
playback
?
starts.
1/12
0:00:00
Audio CD
List
Program
Track1
ates
Track2
Track3
?
Track4
File
an
ISO 9660 file
names
should have
Track5
Track6
Track7
?
Track8
system.
must
incorporate
They
should not
a
maximum of 8 letters and
.mp3 or .wma extension.
contain special letters such as
an
/ ?
*:"<>letc.
?
Press
/
to select
SELECT/ENTER to
2.
Press
on
the disc should be less
than 999.
MP3 / WMA
1.
The total number of files
/
see
to select
SELECT/ENTER.
a
the folder contents.
a
or
starts.
1/104
MP3 / WMA
List
player requires
discs and
recordings
to
meet certain technical standards in order to achieve
track then press PLAY
Playback
0:00:00
This DVD
folder, and press
Program
1-Music1
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many
different types of recordable disc formats (including
CD-R containing MP3 or WMA files) and these require
certain pre-existing conditions (see above) to ensure
compatible playback.
2-Music2
3-Music3
Customers should note that
4-Music4
5-Music5
required
6-Music6
7-Music7
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has no
right to grant such permission. Permission should
always
be
sought
from the
copyright
owner.
otes
?
If you
are
in
a
file list
on
to return to the Folder
on
the
the MP3/WMA
list,
use
the
/
Press MENU to go to the next page.
?
On
CD with MP3/WMA file and JPEG
switch MP3/WMA and JPEG
the
menu.
stop mode and MP3/WMA
of the
menu
MP3/WMA
to
and want
highlight
stop mode and press SELECT/ENTER.
?
a
menu
is
or
or
highlighted. Then,
file, you
can
Press TITLE
JPEG word
use
/
on
on
top
to select
JPEG then press SELECT/ENTER.
31
OPERATION
with Audio CD and MP3/WMA Disc
Operation
Pause
MP3
CD
1 Press PAUSE/STEP
WMA
during playback.
2 To return to
press PLAY
playback,
PAUSE/STEP again.
to another Track
Moving
Press .
>
or
press
MP3
CD
WMA
briefly during
playback to go to the next track
beginning of the current track.
Press . twice
or
briefly
to
or
to return to the
step back
to the
previous
track.
In
of audio
case
CD,
the track number
to go
using
directly
to any
track,
the numbered buttons
enter
(0-9)
during playback.
Repeat
You
can
Track/All/Off
play
a
track/all
on a
1 Press REPEAT when
MP3
CD
WMA
disc.
playing
a
disc. The
repeat icon
appears.
2 Press REPEAT to select
?
?
?
a
desired
repeat mode.
Track:
repeats the current track
All: repeats all the tracks on a disc.
Off(No display):
Search
CD
1 Press FF
or
The
player
2 Press
will
FF
does not
MP3
play repeatedly.
WMA
GG during playback.
now
or
go into SEARCH mode.
GG repeatedly to select the required
speed: mX2, mX4,mX8 (backward)
MX4, MX8 (forward).
3 To exit SEARCH
32
mode, press PLAY.
or
MX2,
with JPEG Disc
Operation
Viewing
This unit
JPEG disc
a
play
JPEG recordings,
on right.
1
can
Insert
Slide Show
JPEG
discs with JPEG files. Before
Use
read the notes
then press SELECT/ENTER.
on
JPEG
playing
Recordings
/
Moving
disc and close the tray.
The JPEG menu appears on the TV
a
screen.
//
to
highlight
the
to another File
Press PREV./NEXT .
>
or
during viewing a
to the previous file.
once
to advance to the next file
picture
(Slide Show)
or
JPEG
List
Still Picture
Preview
JPEG Folder 1
JPEG Folder 2
1 Press PAUSE/STEP
JPEG Folder 3
JPEG Folder 4
The
JPEG Folder 6
JPEG Folder 7
JPEG Folder 8
2
/
Press
to select
a
folder, and press
SELECT/ENTER. A list of files in the folder
?
Tip
list,
"
are
use
"
a
the
file list and want to return to the Folder
/
buttons
on
the remote to
highlight
a
particular file, press
file and press
PLAY.
?
>
(Slow),
move
Use
/
/
Speed options:
(Normal), >>> (Fast) and
//
to select the
minutes,
some
(off).
highlight the Speed. Then, use
option you want to use then press
to
on
of the
the disc
?
Ensure that all the selected files have the
extensions when
copying
into the CD
a
different
".jpg"
layout.
If the files have
rename
:
II
The total number of files and folders
Some discs may be incompatible due to
recording format or the condition of disc.
to the next page.
four Slide
>>
after several
display
?
?
are
upon the size and number of JPEG
files, it could take a long time for the DVD player to
read the disc's contents. If you don't see an on-
Depending
should be less than 999.
?
There
is limited
player
---
a
Tip
?
with this
burn another disc.
If you want to view
/
to highlight
Press MENU to
compatibility
files may be too large
reduce the resolution of
the JPEG files to less than 2760 x 2048 pixels and
menu screen.
SELECT/ENTER or
Slide Show starts from the selected file if Speed
option is not Off.
While viewing a file, you can press STOP(x) to
move to the previous menu (JPEG menu).
?
now
follows:
screen
and press SELECT/ENTER to return to the
previous
3
in
player
JPEG disc
as
appears.
If you
slide show.
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
JPEG Folder 5
will
during
File
them
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
".jpg" extension will not be able
to be read by this DVD player. Even though the
files are shown as JPEG image files in Windows
Explorer.
names
without
SELECT/ENTER.
?
If you set
active.
Speed option
to
Off, Slide Show is
not
33
OPERATION
Programmed Playback
The
MP3
CD
WMA
function enables you to store your favorite tracks from any disc in the
A program can contain 300 tracks (Audio CD/MP3/WMA).
1
Program
Insert
disc.
a
Repeat Programmed
You
Audio CD and MP3/WMA Discs:
Audio CD
MP3/WMA
or
menu
1/12
0:00:00
appears
0:00:00
Audio CD
as
Program
play
a
Program
?
Music8
Track1
Track8
Track2
Track3
Music1
Music16
Track3
Track12
Music2
Music5
Track4
Track7
Music3
Music9
Track5
Track6
Music4
Music1
Track6
Track9
Music5
Music7
Track7
Track1
Music6
Music6
Track8
Track10
Music7
Music3
?
?
MP3/WMA Menu
title/chapter/all/track
2
a
track
disc. The
desired
a
Off(No display):
a
1 Use
/
erase
does not
Track from
repeat icon
repeat mode.
//
from the
the
Program
List
to select the track that you wish
list.
Program
Or, select
list.
play repeatedly.
Program
"
Press SELECT/ENTER to
the List.
on
a
disc.
repeats the current track
All: repeats all the tracks on a disc.
2 Press CLEAR.
Select
playing
on a
Track:
Erasing
to
memory.
Tracks
appears.
2 Press REPEAT to select
1/104
List
Audio CD Menu
can
1 Press REPEAT when
below.
MP3 / WMA
List
player
Repeat
(Delete)" icon then
place the selected track
to
erase
additional tracks
on
on
the list.
"
3
Press PROG./MEMO. Or, select
(Add)" icon
then SELECT/ENTER to place the selected track
on
the
tracks
Program
on
list.
Repeat
to
place
additional
the list.
Erasing
Select
You
can
add all tracks in the disc. Select
(Add All)"
icon then press SELECT/ENTER.
4
Select the track you want to start
Program list.
playing
on
the
Tip
Press MENU to
move
Press PLAY
or
to the next page.
SELECT/ENTER to start.
5 Playback begins
in the order in which you prothe tracks and "PROG." appears on the
grammed
display window. Playback stops after all of the
tracks on the Program list have played once.
34
Complete Program
"
(Del all)", then press
complete Program for the disc is
ote
"
the
List
SELECT/ENTER. The
erased.
ote
The programs
To
resume
Select
are
also cleared when the disc is removed.
normal playback from
the List then press SELECT/ENTER.
"PROG." disappears from the display window.
a
track
programmed playback
on
with DivX Disc
Operation
The unit
play the
etc) and
can
.mpeg, .divx
MPEG4 encoded files
subtitle files
(.avi, mpg,
(.srt, .smi, .sub).
Insert the MPEG4 encoded disc and close the
1
tray.
The DivX
menu
appears
the TV
on
DivX disc
as
player
is limited
follows:
720x576
screen.
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
20-40 characters
1/12
DIVX
?
List
with this
?A vailable resolution size of the DivX file is under
?
0:00:00
compatibility
Movie Folder 1
from
If there is
impossible code to
may be displayed as
"
file, it
Movie Folder 2
(differs
by
language).
express in the DivX
mark on the dis"
_
play.
Movie Folder 3
Movie Folder 4
Movie Folder 5
?
Movie Folder 6
Movie Folder 7
If the number of the screen frame is
1
Movie Folder 8
second, this unit may
not
over
30 per
operate normally.
?I f the video and audio structure of recorded file
is not interleaved, either video
/
Press
2
to select
SELECT/ENTER to
/
Press
3
see
to select
a
folder, and press
?
track then press PLAY
SELECT/ENTER.
or
If the file is recorded with
ports
*
some
There
Press PAUSE/STEP
2.
To return to
You
can
play
a
press PLAY.
playback,
Playable
DivX
playing
a
on a
Playable
disc.
disc. The
repeat
icon
appears.
2 Press REPEAT to select
?
?
a
desired
repeat mode.
Track:
repeats the current track
All: repeats all the tracks on a disc.
Off
(No display):
Subtitle
Xvid, have this option.
different levels of GMC
or
3-point
encoding, usually
GMC.
does not
DivX subtitle file
play repeatedly.
DivX file
z ".avi ",
".mpg ", ".mpeg
Playable
Codec format
"
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ", "MP42 ".
Playable
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
?
Sampling frequency: within 32 48 kHz
DivX
-
within 24
Press SUBTITLE
to
see
the
(S-TITLE) repeatedly during playback
different subtitle language.
?
Bit
40
Search
called
z ".srt ", ".smi ", ".sub ".
title/chapter/all/track
1 Press REPEAT when
?
are
or
during playback.
Track/All/Off
Repeat
of the record level.
encoders, like DivX
1-point, 2-point,
DivX
1.
1-point
GMC?
MPEG4
Pause
of
GMC, the unit sup-
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
starts.
Playback
audio is out-
putted.
the folder contents.
a
or
(MP3),
48kHz
(WMA)
rate: within 32
320kbps (MP3),
192kbps (WMA)
-
-
-
DivX
1 Press SCANFF
or
2 Press SCANFF
or
GG during playback.
GG repeatedly to select the
required speed.
3 To exit SEARCH
Display
DivX
Press DISPLAY
General
mode, press PLAY.
during playback.
playback
status
can
be
displayed
on
the TV
screen.
35
OPERATION
Troubleshooting
Check the
following guide
for the
possible
cause
of
before
problem
a
contacting
service.
Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
Plug the power
securely.
The power is on, but the
unit does not work.
?
No disc is inserted.
?
Insert a disc. (Check that the DVD or, audio
CD indicator in the DVD display is lit.)
No
?
The TV is not set to receive DVD
?
Select the appropriate video input mode on
the TV so the picture from the unit appears
on the TV screen.
?
Connect the video cable into the
picture.
signal
out-
put.
?
The video cable is not connected
securely.
cord into the wall outlet
jacks
securely.
There is no sound or only
a very low-level sound is
heard.
?
The connected TV power is turned off.
?T
?
The equipment connected with the audio
cable is not set to receive DVD signal output.
?
Select the correct input mode of the audio
you can listen to the sound from the unit.
The audio cables
?
Connect the audio cable into the
?
not connected
are
securely
playback picture
is poor.
The unit does not start
jacks
?
The power of the equipment connected with
the audio cable is turned off.
?T urn on the equipment connected with the
audio cable.
?
The audio
?
Replace
?
Clean the disc.
connecting
cord is
damaged.
so
securely.
.
The
u r nontheTV.
it with
new one.
?
The disc is
?
No disc is inserted.
?
Insert a disc. (Check that the DVD, or audio
CD indicator in the DVD display is lit.)
?
An
?
Insert a playable disc. (Check the disc
color system and Regional code.)
down.
?
Place the disc with the
within the
?
Place the disc on the disc
inside the guide.
?
Clean the disc.
?
Press the SET-UP button to turn off the
dirty.
playback.
unplayable
?
The disc is
?
The disc is not
?
The disc is
?Amenu
disc is inserted.
placed upside
placed
guide.
is
dirty.
on
the TV
screen.
playback
type,
side down.
tray correctly
menu
screen.
Severe hum
heard.
or
noise is
?
The
Rating
?
The
plugs
?
The disc is
?
The speakers and
connected poorly.
?
and
jacks
are
Cancel the
ing level.
?
level is set.
?W ipe them with
with alcohol.
dirty.
dirty.
components
are
function
Rating
?
Clean the disc.
?
Connect the
a
cloth
speakers
or
change
slightly
and
the rat-
moistened
components
securely.
The unit is located with too close to the TV.
Move your TV away from the audio compo-
?
nents.
Radio stations cannot be
tuned in.
?
The antenna is
positioned
or
connected
poorly.
?
The signal strength of the stations is too
weak (when tuning in with automatic tuning).
?
No stations have been preset or preset stations have been cleared (when tuning by
?
Connect the antenna
?
Adjust
securely.
the antennas and connect
antenna if necessary.
?T
une
in the station
?
Preset the stations.
an
external
manually.
scanning preset stations).
The remote control does
not work
The remote control is not pointed at the
remote sensor of the unit.
?
Point the remote control at the remote
of the unit.
?
The remote control is too far from the unit.
?
Operate
(7 m).
?
There is an obstacle in the path of the
remote control and the unit.
?
Remove the obstacle.
?
The batteries in the remote control
exhausted.
?
Replace
?
The
?
Insert such
properly.
The sound mode
Logic II mode
be changed.
36
?
or
Pro
cannot
ing
system
a
MP3
cannot
or
change
WMA disc.
are
while
play-
sensor
the remote control within about 23 ft
the batteries with
a
CD disc.
new ones.
Language Code
Enter the
appropriate
(See page 20).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
REF NC
37
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
24).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
LI
Liechtenstein
SD
Sudan
AF
Afghanistan
ET
Spain
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
FI
Finland
LR
Liberia
SG
Singapore
AI
Antigua and
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
Georgia
MK
Macedonia
ST
Saint Tome and
AZ
GF
French
ML
Mali
SU
Former USSR
BA
Azerbaidjan
Bosnia-Herzegovina
GH
Ghana
MM
SV
El Salvador
BB
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SY
Syria
BD
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Bangladesh
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
French Southern
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
Guyana
MZ
Malaysia
Mozambique
TO
Tonga
BT
Bhutan
HK
Hong Kong
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
Central African
ID
Indonesia
NO
UG
CG
Congo
IE
Ireland
NP
Norway
Nepal
UK
Uganda
United Kingdom
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
CI
Ivory
Coast
IN
India
NU
Niue
CK
Cook Islands
IO
British Indian Ocean
NZ
New Zealand
US
United States
CL
Chile
OM
Oman
UY
Uruguay
CM
Cameroon
IQ
Territory
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
Virgin
Islands
(British)
CV
Cape
JP
PL
Poland
VI
Virgin
Islands
(USA)
CX
Christmas Island
KE
Japan
Kenya
PM
Saint Pierre and
VN
Vietnam
CY
Cyprus
KG
Kyrgyzstan
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
DE
Republic
Germany
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
Mayotte
DM
Dominica
KP
North Korea
QA
Qatar
YU
Yugoslavia
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
38
Barbuda
(Keeling)
Islands
Republic
Verde
Republic
Guyana
Georgia
& S. Sandwich
(USA)
Islands
Anguilla
Mayen
Islands
Republic
Principe
Te r r itories
(French)
Tobago
Outlying
Islands
Miquelon
(French)
City
State
Grenadines
Specifications
General Section
Power
Refer to the main label.
supply
consumption
Power
230W
Mass
11.5kg
External dimensions
(W
x
H
x
D)
273
x
326
359
x
mm
REF NC
Tuner/Amplifier Section
FM
AM
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
Output
Power
87.5
108.0 MHz
-
60/55 dB
60
522-1611kHzor530-1610kHzor530-1720kHz
450 kHz
35 dB
100
-
0.2%
Frequency Response
Signal-to-noise ratio
50
1800 Hz
50W
50W
+
10
10
Center: 50W
%),
%)
(6Ω,
THD
10%)
Section
player
Video
Cassette tape
100
-
18000 Hz
More than 70 dB
More than 60 dB
(1 kHz)
(1 kHz)
More than 70 dB
1.0 V
(p-p), 75 Ω
(Y) 1.0 V (p-p), 75 Ω
(C) 0.3 V (p-p), 75 Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync.,
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack
output
output
RCA
x
jack
x
1
2
player
Tape Speed
3kHz±50Hz
Wow Flutter
0.25%
(MTT -111, JIS-WTD)
120sec (C-60)
F.F/REW. Time
125
Frequency Response
Signal to Noise Ratio
Channel Separation
-
8000Hz
43dB(P/B)/43dB(R/B)
45dB(P/B)/42dB(R/P)
52dB (MTT-5511)
Erase Ratio
Speaker
(6Ω, THD
(6Ω, THD
25000 Hz
-
player/DVD/VCD/CD player
output
Component
+
80 dB
Frequency response (audio)
Signal-to-noise ratio (audio)
Signal-to-noise ratio (video)
Dynamic range (audio)
S-video
87.5 -108.0 MHz
10000 Hz
-
T.H.D
Video
MHz,
(Mono/Stereo)
Rear: 50W
DVD/VCD/CD
65 -74
10.7 MHz
Front: 50W
Cassette tape
or
Section
Speaker Name
Type
Impedance
Frequency Response
Front
3
60
-
1
Speaker
Way 2 Speaker
(1m)
50W
100 W
H
x
D)
230X325X310mm
5.1
kg
Rear
1
Speaker (L/R)
Way 2 Speaker
6Ω
20000 Hz
84 dB/W
Rated
x
Center
6Ω
Sound Pressure Level
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
Speaker (L/R)
Way 3 Speaker
150
-
6Ω
20000 Hz
82 dB/W
(1m)
50W
100 W
273X110X161mm
2.3
kg
150
-
20000 Hz
82 dB/W
(1m)
50W
100 W
110X273X161mm
2.3
kg
39
P/NO
:
3834RH0079W
Download PDF

advertising