LG | LM-V320A | LG LM-V320A Owner’s Manual

LM-V320/321/620/621(ENG)
Mini Hi-Fi
System
Owner's Manual
MODEL
CD-R/R
:
LM-V320A,
LM-V321A,
LM-V620A,
LM-V621A,
LMS-V320V
LMS-V321V
LMS-V620V
LMS-V621V
VIDEO CD
Please read this manual
carefully
Retain it for future reference.
before
operating your
set.
PAGE 2
INTRODUCTION
Precautions
CAUTION
CAUTION
Use of controls
procedures
RISK OF ELECTRIC
adjustments or performance of
specified herein may
result in hazardous radiation exposure.
SHOCK DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER
or
other than those
(OR BACK)
Laser component in this product is capable of emitradiation exceeding the limit for Class 1.
ting
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
CAUTION:INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCKS DEFEATED. AVOID
PERSONNEL.
EXPOSURE TO BEAM.
VARNING:OSYNLIG
Graphical Symbols Explanation:
The
DENNA DEL AR
lightning flash with arrowhead symbol,
an equilateral triangle is intended to
within
alert the
dangerous
sure
to the presence of uninsulated
voltage within the product's enclo-
user
that may be of sufficient magnitude to
a risk of electric shock to persons.
LASERSTRALNING
STRALEN AR
OPPNAD
NAR
FARLIG.
Attention:Quand l'appareil est ouvert,
s'exposer
aux
ne pas
radiations invisibles du faisceau laser.
This label is located
on
the interior.
constitute
The exclamation
triangle
point
within
an
is intended to alert the
CLASS 1
equilateral
user
to the
presence of
important operating and maintenance(servicing) instructions in the literature
accompanying the appliance.
LASER PRODUCT
KLASSE 1
LASER PRODUKT
LUOKAN 1
LASER LAITE
KLASS 1
LASER APPARAT
CLASSE 1
PRODUIT LASER
WARNING
This
TO REDUCE THE RISK OF FIRE OF ELECTRIC
LASER
Compact Disc player is classified
product.
as a
CLASS 1
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
The CLASS 1 LASER PRODUCT label is located
RAIN OR MOISTURE.
the exterior.
To avoid electrical shock, do not open the cabinet,
Refer servicing to qualified personnel only.
The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids,
such
as
vases, shall be
placed
on
the apparatus.
on
INTRODUCTION
PAGE 3
Table of Contents
INTRODUCTION
CD/VCD OPERATION
Precautions.............................2
BasicPlayback.........................15
TableofContents.........................3
.4
BasicPlaybackSetup...................15
ToPausePlay.........................15
SafetyPrecautions.........................4
ToStopPlay..........................15
NotesonDiscs............................4
ToSkipaTrackorscene.................15
NotesonRemoteControl...................4
ToSearchatrackorscene................15
NotesonTapes............................4
ToGotoaNextDisc....................15
IdentificationofControls..................5-7
FrontPanel...............................5
ToSelectaDiscDirectly..................15
.15
ToExchangeDiscsDuringPlayback.
RemoteControl............................6
AdvancedPlayback....................16-19
RearPanel/DisplayWindow.................7
LastSceneMemory....................16
Notes(Discs,RemoteControl,Tape).
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
TimeSearchFunction...................16
CONNECTION
DisplayFunction.......................16
AntennaConnections......................8
MultiplexFunction......................16
SpeakerSystemConnection................9
ConnectingtoaTV/Monitor.................9
.16
PBCPlay(PlaybackControlPlay).
DigestPlayback.......................17
BEFORE OPERATION
.10
SettingtheVoltage(OPTIONAL).
SettingtheClock........................10
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?BasicSetting........................17
?IntroScanPlayback...................17
?DiscDigestPlayback..................17
?DiscTrackPlayback...................17
SleepTimerFunction.....................10
RepeatPlayback.......................18
TimerFunctions.........................11
ProgramPlaySetup....................18
AudioAdjustment........................12
MP3Playback.........................19
VolumeAdjustment......................12
SoundQualityAdjustment.................12
ADVANCED OPERATION
MUTE................................12
KARAOKE.............................20
SURROUND...........................12
KaraokeFunction.......................20
XDSS
(Extreme Dynamic Sound System)
Auxiliary (External Equipment) Input
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
12
12
ToAdjustECHOVolume.................20
.20
ToChangetheKey(KEYCONTROL).
RecordingwithKaraoke..................20
.
.
.
.
.
.
RADIO OPERATION
PresettingRadioStations..................13
ListeningtotheRadio....................13
CASSETTE DECK OPERATION
TapeOperation.........................14
BasicPlayback........................14
ToStopPlay..........................14
TapeCounterReset.....................14
.14
ToPlayRewindorFastForward.
.
.
.
.
.
.
.
.
.
.
Dubbing..............................14
RecordingSetup........................14
BasicSetting..........................14
Recording from Radio, CD or Auxiliary Source 14
.14
CDtoTapeSynchronizedRecording.
.
.
.
.
.
.
.
.
REFERENCE
.21
SystemSelection(NTSC/PAL).
DiscsRequirements......................21
Troubleshooting.........................22
Specifications...........................23
.
.
.
.
.
.
.
.
.
.
.
.
PAGE 4
INTRODUCTION
Notes (Discs, Remote Control, Tape)
Precautions
Safety
Handling
When
Notes
the unit
shipping
on
Remote control
volatile
liquids,
such
They
will leave marks
Cleaning
on
Use
a
insecticide spray,
plastic products
or
long period
in
Remote control
battery
of time.
the
solution. Do not
benzine,
or
use
thinner,
cover on
and
aligned correctly.
are
moistened with
a
extremely dirty,
detergent
mild
strong solvents, such
as
battery
of the remote control,
and insert two R03 (size AAA)
rear
batteries with
soft, dry cloth. If the surfaces
lightly
installation
Detach the
the surface.
the unit
soft cloth
from the front of the
About 30° in each direction of the front of the
To clean the cabinet
use a
(7 m)
remote sensor.
as
the unit. Do not leave rubber
near
contact with the unit for a
and press
remote sensor.
the surface clean
use
About 23 ft
Distance:
Angle:
Do not
sensor
the buttons.
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
keep
operating range
Point the remote control at the remote
the unit
The
To
Remote Control
these
as
might damage
alcohol,
the surface
of the unit.
Caution
Do not mix old and
Notes
Discs
on
Handling
Hold the disc
on
batteries. Never mix different
discs
playback side of the disc.
by the edges so that fingerprints
Notes
Do not touch the
get
new
types of batteries (standard, alkaline, etc.).
will not
on
Tapes
Preventing overwriting
a
recording
the surface.
Do not stick paper
or
tape
on
the disc.
Removing the safety tab(s) of the cassette (with
screwdriver) will prevent accidental erasure.
a
small
Side A
Tab for side A
Storing
After
discs
playing,
there may be
increase inside the car.
sunlight,
as
Cleaning
Tab for side B
store the disc in its case.
Do not expose the disc to direct sunlight or sources
of heat, or leave it in a parked car exposed to direct
a
considerable temperature
To record
again,
cover
the hole of the tab with adhesive
tape.
discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Adhesive tape.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for
analog
records.
INTRODUCTION
Identification of Controls
PAGE 5
(Cont'd)
Front Panel
LM-V320A Model
LM-V321A Model
LM-V620A Model
LM-V621A Model
12
34
2019
12
18
34
17
56
1615
78
910
14
CD DOOR
?
?
3.
?
?
?
4.
5.
?
?
6.
?
?
7.
?
?
?
?
8.
14
13
12
11 .?RECORD/
?
PBC button
?
PLAY MODE button
COUNTER button
:
?
OPTIONAL
OPTIONAL
:
RETURN button
?
(STANDBY/ON)
button
?
SURROUND button
?
EQUALIZER (EQ) button
XDSS button
?
?
CLOCK button
RECORD PAUSE
TUNING/ TUNING
REC
(
button
)
buttons
PREV./ NEXT button
REWIND/ FAST FORWARD PLAY
(/)
PRESET (
button
/
)
button
SELECT button
FORWARD PLAY
(
)
BACKWARD PLAY
STOP
(
(
)/ CLEAR
button
)
button
:
OPTIONAL
button
12.
PUSH OPEN
position
13.
PUSH OPEN
position
-
TAPE 1
(DECK 1)
TAPE 2
(DECK 2)
TIMER button
PROG./ MEMO button
SET
(CLOCK/ TIMER)
COUNTER button
CD PAUSE
(CD
:
)
14.
button
or
buttons
6.3mm
(MIC):
MIC VOLUME KNOB
:
OPTIONAL
(MIC VOL.)
(PHONES):
16. DISC DIRECT PLAY buttons
17. DISC SKIP
MULTI JOG SHUTTLE
10. HEADPHONE JACK
MIC JACK
-
:
OPTIONAL
15. VOLUME DOWN/UP knob
button
FUNCTION SELECT indicators
?
?
OPTIONAL
(TAPE, CD, TUNER/BAND, AUX)
9.
17
1615
910
FM MODE/RIF button
POWER
?
56
78
13
12
2.
18
11
11
1.
2019
(D.SKIP)
18. CD OPEN/ CLOSE
6.3mm
19.
?
?
?
?
?
(DISC1, DISC2, DISC3)
button
(CD
)
button
CD SYNC. button
NORMAL DUBBING button
HIGH DUBBING button
MENU
SCAN
(-/+) button
(-/+) button
20. REMOTE SENSOR
PAGE 6
INTRODUCTION
Identification of Controls
(Cont'd)
You will find instructions for each of the remote control functions in the
appropriate
sections of this
instruction manual.
Remote Control
1
2
TUNER
CD
TAPE
POWER button
2.
Function select buttons
3.
PRESET
4.
Numeric buttons
5.
VCD/CD CONTROL buttons
(TUNER, CD, TAPE, AUX)
24
MUTE
POWER
1.
AUX
PRESET
3
12345
-
4
PAUSE
STOP
D.SKIP
23
5
PREV
NEXT
-
REPEAT PROGRAM RETURN
-
6
7
8
9
b-KEY CON-#
MPX
ECHO
L.MEMORY T.SEARCH
DISPLAY
FANFARE /
SCORE DIGEST NTSC/PAL
22
21
CD/
TAPE 2
17
KARAOKE
10
11
TAPE
OPTIONAL
16
SURR.
-
20
19
18
TAPE 1
-
)
DISC SKIP
(D.SKIP)
PREV/NEXT
(
)
/
REPEAT
PROGRAM
6.
KEY CONTROL buttons
(b
7.
FANFARE
/SCORE button
8.
MPX button
9.
ECHO button
(OPTIONAL)
-
KEY CON
-
#
)
EQ.PATT
10. TAPE 1/2 SELECT buttons
12
XDSS
VOLUME
15
11.TAPE FUNCTION buttons
-
13
)
-STOP(
PBC
buttons
)/SELECT
(
-PAUSE(
67890
SELECT
PLAY
(-/+)
SLEEP
-
FAST REWIND/FAST FORWARD PLAY
BACKWARD PLAY
14
-
FORWARD PLAY
-STOP(
-
(
(
):
)
)
RECORD/RECORD PAUSE
12. SURROUND
(SURR.)
button
13. XDSS button
14. SLEEP button
15. VOLUME +/- buttons
16. EQ PATTERN button
17. DIGEST button
18. NTSC/PAL button
19.
L.(Last) MEMORY
button
20. DISPLAY button
21.
OPTIONAL
T.(Time) SEARCH
22. RETURN
(
23. PBC button
24. MUTE button
)
button
button
(
)
(
/
)
INTRODUCTION
PAGE 7
Identification of Controls
Rear Panel
AM
FM
AM
1
FM
2
RL
3
L
4
R
L+
-
5
-
R+
76
1.
ANTENNA Terminal
5.
SPEAKER Terminal
2.
AUXILIARY INPUT Jack
6.
VOLTAGE SELECTOR
3.
VIDEO OUT Jack
7.
POWER Cord
4.
AUDIO
Display
(CD) OUT
:
OPTIONAL
Jacks
Window
1
2
11
13
12
7
9
10
8
5
4
3
6
1.
LEVEL indicator
8.
MUTE indicator
2.
FM STEREO RECEIVING indicator
9.
TAPE DIRECTION indicator
3.
FM MONO RECEIVING indicator
10. PLAY MODE indicator
4.
DISC Number indicator
11
5.
DISC ENTERED indicator
12. REPEAT indicator
6.
R.I.F indicator
13. TIMER indicator
7.
AUTO TUNE RECEIVING indicator
.
(OPTIONAL)
RECORD / RECORD PAUSE indicator
PAGE 8
CONNECTION
Antenna Connections
Connect the
?
?
supplied AM/FM (SW : OPTIONAL) antennas for listening to the radio.
loop antenna to the AM antenna connector.
Connect the FM wire antenna (or FM "T" antenna) to the FM 75Ω coaxial / 300Ω connector.
Connect the AM
(1)
2
BAND(FM/AM)
(2)
AREA
BAND(FM/MW/LW)
AREA
For MW/LW reception, connect
the loop antenna (aerial) to the
FM external
antenna(aerial)
(not supplied)
300
3
terminal marked MW/LW
cable
MW/LW
antenna
AM
loop antenna
(aerial)... included
FM indoor
FM external
antenna(aerial)
AM
Position
it for the
best
antenna(aerial)
(not supplied)
MW
/LW
GND
FM
FM 75
reception
3)
3
BAND(FM/MW/SW)
MW
loop
antenna
AREA
4)
(aerial)
2
BAND[FM/AM(MW)] AREA
For AM(MW) reception, connect
the loop antenna (aerial) to the
terminal marked AM
AM(MW) loop
antenna (aerial)
FM external
FM indoor antenna
antenna(aerial)
(not supplied)
(aerial)
Position it for the
best reception
FM external
coaxial cable
antenna(aerial)
(not supplied)
SW
MW
AM
GND
FM 75
FM
MW ANTENNA WIRE
SW Antenna
TWISTED LINE
FM ANTENNA WIRE
otes
To prevent noise pickup, keep the AM loop antenna away from the unit and other components.
Be sure to fully extend the FM antenna wire.
After
loop
(aerial)
connecting
the FM antenna wire,
keep
it
as
horizontal
as
possible.
CONNECTION
PAGE 9
Speaker System Connection
Connect
connector to the
speaker
cords. To obtain the best
supplied speaker cords by matching the colors of the terminals and those
possible
adjust the speaker parameters (distance, level, etc.).
of the
surround sound,
L
Red
R
L+
-
Black
-
R+
Right speaker
Left
speaker
Red
otes
Be
are
sure
to match the
cord to the
speaker
appropriate
terminal
the components:
on
+
to
+
and
--
to
--.
If the cords
reversed, the sound will be distorted and will lack bass.
If you
output
use
front
to the
speakers
speakers.
with
Do not disassemble the front
Connecting
TV
or
a
low maximum
cover
of
input rating, adjust
the volume
carefully
to avoid excessive sound
supplied speaker.
to a TV/Monitor
Monitor
To TV Video In
R
L
R
VIDEO VIDEO
AUDIO AUDIO
To Video out
To TV or VCR etc.
(To Audio In)
IN
OUT
To AUX Jack
VIDEO OUT
jack
connection
Connect the VIDEO OUT
AUDIO OUT
jacks
jacks
on
the back of the unit to
a
VIDEO IN
jack
of
a
TV
or
monitor.
a
AUDIO IN
jack
of
a
TV
or
monitor.
connection
Connect the AUDIO OUT
AUX
jack
jack
on
the back of the unit to
connection
Two
phones jacks marked AUX are provided on the back of the unit for connecting other
(For example, a record player with a pre amplifier, video recorder or tape recorder.)
units.
otes
Refer to the owner's manual of your TV as well.
When you connect the unit to your TV, be sure to turn off the power and
before making.
unplug
both units from the wall outlet
PAGE 10
BEFORE OPERATION
Setting
the
Voltage (OPTIONAL)
If your set is equipped with a voltage selector at the back side, be
the AC power cord.
sure
to set it to your local power
supplied
before
connecting
Setting
1
the Clock
Press CLOCK.
requires setting, press and
CLOCK for more than 2 seconds.)
The hours display begins to blink.
(If
the clock
4
hold
Use PRESET
(
/
)
or
MULTI JOG SHUTTLE
to set the current hour.
-
2.
Select either the 24 hour
cycle
cycle by pressing PRESET (
or
/
the 12 hour
)
or
turning
MULTI JOG SHUTTLE.
(12HR)
3
When the
1
To
cycle.
timer is set, the unit
specify
the time
delay
automatically
(
/
)
or
MULTI JOG SHUTTLE
Press SET and the correct time is shown
7
the
8
the
on
display.
Press CLOCK at any time to show the time
display, for about 5 seconds.
turns off after the
before the power is
turned off, press SLEEP.
window you can see
for
about 5 seconds. This means that the system
turns off automatically after 90 minutes.
display
Each time the button is
before it turns off is
pressed the time interval
reduced by 10 minutes. i.e.
80...70... etc.
Select the desired time to turn off.
2
Use PRESET
to set current minutes.
on
Timer Function
sleep
In the
6.
(24HR)
or
Press SET to confirm the selected hour
Sleep
5
Press SET.
To check the
remaining
time until the power is
turned off.
sleep function is active press SLEEP
briefly. The time remaining until the unit turns off
is displayed for about 5 seconds.
While the
specified
time has
elapsed.
Note
If you press SLEEP while the sleep time is disthe SLEEP time is reset.
played,
To cancel
Sleep
Timer
setting
If you wish to stop the function, press the SLEEP button
repeatedly until "SLEEP 10" appears, and then press
SLEEP
display.
once
again
after "SLEEP 10" shows
on
the
BEFORE OPERATION
PAGE 11
Timer Functions
Using the TIMER function
play and recording turned
1
you can have the radio reception and
and off at the time desired.
recording, CD play, tape play
Press CLOCK to check the current time.
8
For your reference
source
9 (/)
setting mode.
display window in
on
minutes time.
.
Set the turn off hour time
Press TIMER to enter the timer
TUNER-CD-TAPE flash in the
Press SET to confirm the turn
'OFF TIME' indicator appears for about 0.5
seconds in the display window and then
disappears
If you don't set clock, timer function doesn't work.
2
auxiliary
or
on
or
turning
using
the PRESET
MULTI JOG SHUTTLE.
turn.
For your reference
If you want to correct the
previous
memorized TIMER
setting, press and hold the TIMER button
seconds.
The
-
""
previous
memorized timer
indicators appear in the
setting
more
for On Time and
4
1.
window
alternately
for
about 3 seconds.
b.
'PLAY' indicator
:
TUNER
'REC' indicator
:
TUNER
play only
play and
recording
Select the previous memorized preset
number with PRESET (/) buttons or
MULTI JOG SHUTTLE on the front panel
and press SET.
'ON TIME' indicator appears for about
0.5 seconds in the display window and
12
or
turning
using
the PRESET
MULTI JOG SHUTTLE.
Press SET.
14
the volume level
or
turning
timer
15
setting
Turn the
has been
completed.
system off.
The selected timer functions
switched
or
timer
setting
To activate
are
automatically
and off at the preset times.
on
check the timer
select the timer set
disappears.
the PRESET
Press SET.
Each time the "TIMER" button is
2. When you select CD or TAPE function,
'ON TIME' indicator appears for about 0.5
seconds in the display window and then
using
MULTI JOG SHUTTLE.
"TIMER" appears in the display window and the
To cancel
-
then
(/)
13 Adjust
(/)
When you select TUNER function,
'PLAY' and 'REC' indicator flash in
display
Set the turn off minutes
display.
3
the
11
than 2
Press SET when the desired function flashes.
a.
10
Press SET.
or
pressed
cancel. You
can
you can
also check the
status.
or
check the timer, press the
"TIMER"
-
button
5
or
turning
on
hour
using
the PRESET
Press SET to confirm the turn
7
Set the turn
(/)
(
/
repeatedly
)
MULTI JOG SHUTTLE.
on
"
"
appears in the
display
To cancel the TIMER, press the "TIMER" button
6
or
that
window.
disappears.
Set the turn
repeatedly
so
minutes time
turning
on
hour time.
using
the PRESET
MULTI JOG SHUTTLE.
window.
so
that
"
"
disappears
from the
display
PAGE 12
Audio
Volume
?
BEFORE OPERATION
Adjustment
MUTE
Adjustment
On unit, turn VOLUME DOWN/UP knob clockwise to
increase the sound level, or counterclockwise to
Press MUTE to turn off the sound, press
decrease it.
?
On remote,
level,
You
use
or use
VOLUME
VOLUME
-
+
again
to
restore.
to increase the sound
the
to decrease it on the remote
can
mute your unit in
telephone,
"
"
order, for example, to
indicator flashes in the
answer
display
win-
dow.
control.
SURROUND
Sound
?To
Quality Adjustment
To activate surround mode
You
activate stereo sound
You
can
Select
a
choose between 4 fixed sound
desired sound mode
the remote control
or
EQ
on
using
impressions.
the EQ.PATT
the front
:
ROCK
:
POP
:
frequency response
More bass, more treble
Less bass, less treble
CLASSIC
:
For orchestral music
a
choose
one among 3 fixed sound
desired surround mode using the
SURROUND 1 ON
→
SURROUND 2 ON
→
SURROUND OFF
Linear
XDSS
(Extreme Dynamic Sound System)
Use the XDSS feature to reinforce treble
?Headphone
Jack
bass
Connect
a stereo headphone plug
6.3mm) into the
headphone jack.
The speakers are automatically disconnected when
you plug in the headphones (not supplied).
(UBB:
Ultra Bass
The "XDSS ON"
or
Connect
an
auxiliary
device i.e. TV
or
VCR, via the
"XDSS OFF" indicator
To cancel it press XDSS
rear
mounted AUX
again.
phone jacks.
Press AUX.
ote
You
can
also record from the
auxiliary input
source, see
Recording Section.
(Hi-Tone)
Booster).
Auxiliary (External Equipment) Input
1
2
impressions.
SURROUND button.
on
panel.
FLAT
can
Select
lights
up.
and
RADIO OPERATION
Presetting
You
can
Radio Stations
preset 30 stations for FM and AM (SW
OPTIONAL).
Before
tuning,
make
sure
To tune in
:
that you have
2
Press TUNER/BAND
TUNER
control) to show either FM
AL) in the display window.
or
AM
on
station
the remote
(SW
:
OPTION-
And then every time you press TUNER/BAND
(or TUNER on the remote control), FM and AM
(SW
3
(or
:
OPTIONAL) change alternately.
/
Press TUNING
until the
frequency
on
the front
indication starts to
panel
change,
then release.
Scanning stops
when the unit tunes in
4
5PressPRESET(
control)
A
a
the front
preset number will flash in the
/
the remote
panel.
display window.
)(orPRESET(
to select the
)on
preset number
you want.
Press PROG./MEMO
6
Repeat
7
steps 3
Press and hold PROG./MEMO
again.
the front
panel
for
are
cleared.
For your reference
If all stations have already been entered, FULL message
will appear in the display window for a moment and then
a
preset number will flash. To change the preset number,
the left side.
on
preset numbers
/
PressandholdPRESET(
on the remote control) until
appears
or
)(orPRESET(
)
the desired preset number
press the button
Automatic
Manual
to 6 to store other stations.
on
about two seconds, "CLEAR" appears in the display
window and then press CLEAR again, the stations
repeatedly.
Tuning
/
for
more
than 0.5 seconds.
Tuning
/
Use TUNING
briefly
and
repeatedly.
Use the MULTI JOG SHUTTLE.
Listening
1
signal
To clear all memorized stations
Use TUNING
The station is stored.
-
weak
a
manually.
To recall
on
station with
follow the steps 5-6
station.
Press PROG./MEMO
a
Use the MULTI JOG SHUTTLE in step 3 to tune in the
turned the volume down to the minimum level.
1
PAGE 13
to the Radio
To turn the radio off
Use TUNER/BAND (or TUNER on the remote
control) to select either AM or FM (SW :
OPTIONAL) in the display window.
Press POWER to turn off the unit
function mode
(CD,
TAPE
or
to select another
or
AUX).
The last received station is tuned in.
2
( / ) (or PRESET
control) repeatedly to select
Press PRESET
the remote
on
For your reference
If a FM program is noisy
Press FM MODE/RIF repeatedly
?
the
preset station you want.
Each time you press the button, the unit tunes in
disappears
stereo
the next preset station.
3
Adjust
the volume
To listen to
?
?
For manual
For
by rotating
(or pressing VOLUME (-/+)
control) repeatedly.
non-preset radio stations
tuning, see "Manual Tuning" as above.
automatic tuning, see "Automatic Tuning" as
above.
?
on
display
that
"
"
window. There will be
no
effect, but the reception will improve. Press
FM MODE/RIF
VOLUME
DOWN/UP KNOB
the remote
in the
so
again
to restore the stereo effect.
To
improve reception
Reposition the supplied
antennas.
otes
Use FM MODE/RIF
(Radio
function to switch to Mono
tion is distorted
by
Interference
reception
Filter)
if stereo recep-
noise.
weak AM broadcasts, if noises
occurs, press FM MODE/RIF once.
While
recording
PAGE 14
CASSETTE DECK OPERATION
Tape Operation
Basic
Use TAPE
1
to select
2
3
4
To
Playback
(or
TAPE-1/2
on
Press STOP
control)
tape function.
("NO
TAPE" appears in the
Open
cassette TAPE 1
PUSH OPEN
Insert
the remote
(or
with the
or remote
control.
OPTIONAL)
:
tape side
To
After auto stop deck
the front
on
panel
(TAPE 1/2)
plays
front side of cassette, the unit
stops automatically.
AUTO REVERSE DECK
Select cassette
Play Rewind
(TAPE 2) : OPTIONAL
direction
playback
(front
or
back)
with
at the
1
Press TAPE
?
Press
After the cassette in deck TAPE 2
times
plays
front and
repeatedly
side, stops automatically.
on.
Normal
speed
copying.
HIGH
2
to dub.
Function
Display
Double
speed
copying.
side,
Three
six times
playback tape
blank tape to copy
DUBBING
stops automatically.
reverse
a
DUBBING
After the cassette in deck TAPE 2
reverse
TAPE-1/ 2.
NOR.
plays front or reverse (backward
play) side, stops automatically.
front and
or
to another.
tape
Cassette TAPE 2- Insert
Function
plays
one
Cassette TAPE 1- Insert the
After the cassette in deck TAPE 2
Twice
/
PLAY
Dubbing
?
Display
Once
win-
Fast Forward
or
on the front panel or
during playback, press
tape position you want.
How to copy from
PLAY MODE button.
Pressing
display
/
After press
on the remote control
()
AUTO STOP DECK
in
dow.
one or two cassettes
Press
during playback.
(or 2) 0000"
time appears "TP 1
Playing
to the bottom and then close the TAPE 1
door.
) during playback.
Press COUNTER
to the
position.
(and/or 2)
(
Tape Counter Reset
display window.)
(or 2) by pushing
Stop Play
Press NOR./ HIGH DUBBING
indicated
as
below.
To stop
recording, press STOP (
).
Recording Setup
Basic
1
2
CD to
Setting
Press CD
Open
TUNER/BAND to select
or
source.
the cassette deck TAPE 2 and insert
a
blank cassette into the cassette compartment.
Set the
recording
direction :OPTIONAL
Press PLAY MODE
repeatedly
to set the
1
Press
"
from Radio, CD
REC
on
or
the front
Auxiliary
source
1
Press CD SYNC. in stop mode.
"
"
REC" flashes and
"
displays
in the
window.
2
The
synchronized recording is started
matically after about 7 seconds.
auto-
otes
If you wish to record from the desired track, select
(or
or remote
The
cassette.
panel.
mode.
2
complete CD
a
synchro recording function dubs
programmed titles automatically into
recording
REC" flashes and holds the cassette in pause
Press
a
and
display
direction.
Recording
Tape Synchronized Recording
The CD
:
OPTIONAL)
on
the front
panel
control.
recording
To pause the
is
the desired track with
JOG SHUTTLE before
/
recording.
begun.
A function
REC
recording, press
(" REC" flashes in display window.)
To pause the recording, press STOP(
or
).
.
recording.
change
or
MULTI
commencing CD synchro
is not
possible during
CD/VCD OPERATION
Basic
Playback
To Search
Preparation
In case of
Turn
using
TV
a
input
so
that you
view the
can
pictures from this unit.
using an amplifier
the amplifier and select the CD player position
(When
on
that you
so
Basic
can
Press the CD
(or
on
Video
the unit.
).)
FF X1
button to select CD
CD)
?
function.
no
The
(reverse) is relatively slow at
pressed again, the speed
becomes faster. (Each time the button is pressed, the
speed increases up to 4 steps.)
The speed will be retained even after the button is
speed
of advance
first. When the button is
released.
disc is in the disc drawer, the "NO DISC"
indicator appears.
3
repeatedly during playback.
is displayed, press PLAY (
scene
Playback Setup
Press POWER to turn
If
desired
FR X1
listen to the sound from this unit.
?
1
2
a
or scene
(TV screen)
In case of
Turn
track
a
/
Press
the TV and select the video
on
PAGE 15
ToGotoaNextDisc
Press CD OPEN/CLOSE
disc into the disc tray.
The disc on the left (DISC
(CD )
1)
is
and
played
the
place
Press D.SKIP
during playback
in
or
Stop
mode.
first.
To Select
With the label side up
a
Disc
Press DISC 1, DISC 2
in Stop mode.
Directly
or
DISC 3
during playback
or
When you press DISC 1-3 before playing a disc, the unit
automatically start playing the selected disc.
will
To
ote
To load
an
8cm
(3 inch) disc, put
it onto the inner cir-
cle of the tray.
4
5
Press CD OPEN/CLOSE
(CD )
to close the
disc compartment.
Press
or
on
without
Play
Press CD PAUSE
(CD
)
or
PLAY/ PAUSE
(
)
2
during playback.
Press the button
?T
?
again
to resume
play.
of the current disc.
Press CD OPEN/CLOSE
(CD
).
The disc tray is opened. Two disc compartments
appear. Even if the unit is playing a disc, it doesn't
Skip
urn
a
(
3
) during playback.
Track
discs in the compartments with other
The unit
plays
the disc in the left compartment
one in the
Press NEXT button to go to the next
Press CD OPEN/CLOSE
(CD
).
The CD door closes.
otes
or scene
Do not
MULTI JOG SHUTTLE to select the track.
scene or
Press PREV. button to go to the back
track.
scene or
Replace
ones.
right compartment.
track.
?
interrupting playback
after the current disc, and then the
Stop Play
Press STOP
To
During Playback
stop playing.
To Pause
To
Discs
You can open the disc tray while playing a disc to check
what discs are to be played next and exchange discs,
1
the remote control.
Exchange
preceding
place
more
than
one
compact disc
on one
disc tray at the same time.
Do not push on the disc tray to close CD door, you
may damage the unit.
PAGE 16
CD/VCD OPERATION
Advanced
Last Scene
Playback (Continued)
Multiplex Function
Memory
point you stopped a VIDEO CD
and you can resume playback from that point.
It is not available during playing an audio CD.
The unit memorizes the
You
can
select the sound from the
right
or
left channel
and listen to the sound of the selected channel
both the
and left
right
through
In this case, the sound
speakers.
loses the stereo effect.
1
2
Press STOP
) during playback.
Press L. MEMORY
The unit starts
?
stopped
?
3
(
on
Press MPX
the remote control.
playback
from the
point
you
the VIDEO CD in step 1.
"RESUME" appears
on
the TV
Press CD OPEN/CLOSE
1)
is
Pressing
Screen
Once
MONO L
Twice
MONO R
screen.
(CD )
disc into the disc tray.
The disc on the left (DISC
and
played
during playing
place
a
Time Search function is
discs that have
only
a
time
as a
guide
to
useful when
during playing
or
(TV screen)
TIME SEARCH
_
PBC
?
_:_
You
right
You
can
hear the sound of the
channel.
can
hear the standard
stereo sound.
This screen doesn't appear on the display window.
This function doesn't work for TUNER, TAPE and
AUX functions.
playing
stopping.
hear the sound of the
otes
VIDEO CD.
especially
can
left channel.
STEREO
times
few track divisions.
Press T.SEARCH
1
elapsed
You
first.
Time Search Function
use
disc.
Function
the
Three
This function lets you
find a certain point on
a
Each time you press the button, the indication and the
sound from the speakers change as follows.
Play (Playback Control Play)
playing VIDEO CD with PBC functions (Version
discs), you can enjoy playing simple interactive
When
2.0
_
software, software with search functions, etc.
?
2
Press the NUMERIC buttons to enter the time
of the
point that you want to locate.
Playback is started automatically from the
?
entered
time.
PBC
play allows you to play VIDEO CD interactively,
following the menu screen on the TV screen.
Also refer to the instructions supplied with the disc, as
the operating procedure may differ according to the
VIDEO CD.
`
TIME SEARCH 22:15
1
AUDIO CD and
2.0
?
You
2
can
Yo u
can
view the
view the remained time per a track.
Press DISPLAY once more during playing.
-
You
view the total remained time
(
).
on
the disc.
Select the
menu
display
window.
number you want by pressing
on the remote control.
NUMERIC buttons
The selected item is
now
executed.
(Or Select the menu number you want by pressing the MENU (-)/(+) on the front panel, and then
press the PLAY ( ) or SELECT button.)
Function
during playing.
elapsed time per a track.
DISPLAY again during playing.
can
Press
-
?
,
Press DISPLAY
-
?
during Digest Play
VIDEO CD with PBC function (Version
discs).
Display
PLAY
"PBC" appears in the
For your reference
This function can not be used
?
Insert VIDEO CD with PBC function, press
To
Stop play
Press STOP
(
) during playback.
Togothenextofamenu
Press NEXT.
To go back to
a
previous
menu
Press PREV..
Togobacktothetopofamenu
Press RETURN
(
).
CD/VCD
Advanced
Disc
You
otes
Digest play
You
can
playing
without PBC functions.
1
Press NUMERIC button 2.
During playing a VIDEO CD
picture of the first
?
pictures
following
to 9.
or scene
you want
by observing
appears
on
1.INTRO
2.DISC
3.TRACK
4.EXIT
the TV
screen.
3
8
9
4
7
6
5
To view still
Playback
Press NUMERIC button 1.
only plays
or scene on
10 seconds the
beginnings
of
2
of the tracks of the
pictures
over
Press NEXT
).
The TV
(
screen
9
shows still
To go back to the
?
each track
2
tracks numbered
?
This function
1
at one time on the TV screen.
DIGEST MENU
?
screen
of tracks 1
scenes
during stopping.
menu
Intro Scan
the TV
,
shows still
locate the disc
Press DIGEST
locate the track you want by observing the first
on the disc at one time on the TV
of 9 tracks
screen.
playing a
unit automatically
Setting
several still
The
can
before you start
VIDEO CD with PBC functions, the
Basic
Digest Playback
picture
This function is not used in MP3 file CD.
starts
PAGE 17
Playback (Continued)
Digest Playback
If you start
OPERATION
pictures of tracks 10 to 18.
previous screen, press PREV..
Press NUMERIC buttons to select the track you
want.
The unit starts
playing
from the selected track.
the disc.
To cancel Disc
digest playback
Press STOP
).
(
INTRO SCAN
Disc Track
You
can
Playback
locate the
point
you want
by observing
first
pic-
ture of 9EA of each section at one time on the TV
?
?
In
case
In
case
of audio CD, you can only hear
of VIDEO CD, you will also see
a
sound.
a scene.
screen.
This
might
is divided into
1
a
be useful when you play
as a movie.
a
disc which
few tracks, such
Press NUMERIC button 3.
?
During playing
a
VIDEO CD
track into 9 sections and TV
pictures
,
the unit divides the
screen
shows still
of each section in order.
1
2
3
8
9
4
7
6
5
For your reference
To view sections of another track, press NEXT
such as Disc digest play.
2
Press NUMERIC buttons to select the
point you
want.
The unit starts
playing
To cancel Disc track
Press STOP
(
).
from the selected
play
point.
PAGE 18
CD/VCD OPERATION
Advanced
Playback (Continued)
Program Play Setup
Repeat Playback
NOTE: The repeat
play
does not work in PBC ON sta-
tus of the VIDEO CD with PBC function
To
play
one
track
Press REPEAT
"
-"
To
one
"
-"
To
play
"appears
To cancel repeat
-
on
all disc
once more
in the
function(Version 2.0).
This function is not available to MP3 discs.
1
window.
Press PROG./MEMO
remote
control)
(or PROGRAM
Stop mode.
on
the
in the
repeatedly
during playback.
display
window.
2
to select the disc.
3
to select the track.
Press D.SKIP
or
DISC DIRECT PLAY
(DISC1/2/3)
play
Press REPEAT several times until
"repeat
indicator"
Use PREV./NEXT
In
Program repeat play
Press REPEAT
does not work in PBC ON status
playback
of the VIDEO CD with PBC
disappears.
?
the discs and
on
otes
repeatedly
display
arrange the order of the tracks
The program
again during playback.
all tracks
-"
repeatedly
appears in the
Press REPEAT
can
create your own program. The program can contain up
to 20 tracks.
during playback.
the display window.
disc
Press REPEAT
You
once
appears in
play
(Version 2.0).
during program play.
-"
appears in the display window.
(One track repeat)
case
of
or turn
MULTI JOG SHUTTLE
using NUMERIC (0~9)button,
press "0" and "3".
once
"
?
Press REPEAT
-"
again during
"appears in
(All program repeat)
the
program
display
play.
window.
4
5
6
Press PROG./MEMO
remote
(or PROGRAM
the
control).
Repeat steps 1~5to select additional discs
and tracks.
Press PLAY
()
.
To check program contents
Press PROG./MEMO. (or PROGRAM
control) in Stop mode.
-
on
the remote
on
A disc, track and program number will be
displayed.
To clear program contents
Press PROG./MEMO. (or PROGRAM on the remote
control) in stop mode. Then press CLEAR on the front
panel or STOP ( ) on the remote control.
To add program contents
1.
Press PROG./MEMO.
(or PROGRAM
the
on
in the program
mode until "Disc Number" blinks.
remote
control) repeatedly
2. Repeat steps
2~5as shown to the above.
To
modify program
contents
1.
Use PROG./MEMO.
(or PROGRAM
control)
modify.
to
display
2. Repeat steps
Stop
on
the remote
program number you want to
2~5as shown to the above.
CD/VCD OPERATION
Advanced
MP3
1
Playback
Playback
Load
an
otes
The
directory
English.
MP3 disc.
The ROOT
directory
is
menu
displayed
on
the TV
during playback,
automatically.
FOLDER
:
ROOT
PAGE 01/ 01
To
?
TRACK_1
TRACK_3
TRACK_5
TRACK_7
TRACK_9
TRACK_2
TRACK_4
TRACK_6
TRACK_8
Press PREV./NEXT to select the
MP3 files that you want to
then press SELECT.
play
directory
are
?
?
PAGE 01/ 02
MUSIC_1
MUSIC_3
MUSIC_5
MUSIC_4
MUSIC_5
MUSIC_2
MUSIC_4
MUSIC_6
MUSIC_4
MUSIC_5
?
directory
MP3 FILE
on
:
the disc.
TRACK_1
PAGE 01/ 02
MUSIC_1
MUSIC_3
MUSIC_5
MUSIC_4
MUSIC_5
4
Press PLAY
()
to start
For your reference
Press PREV./NEXT to
?
MUSIC_2
MUSIC_4
MUSIC_6
MUSIC_4
MUSIC_5
play
playback
the next file
of
or
a
file.
previous
file
during playback.
?
Press RETURN
ry
(
during playback.
)
to move to the ROOT directo-
FOLDER
:
ROOT
PAGE 01/ 01
TRACK_1
TRACK_3
TRACK_5
TRACK_7
TRACK_9
TRACK_2
TRACK_4
TRACK_6
TRACK_8
in
by pressing PREV./NEXT
played after 5 seconds
MP3 file
appears in the
repeatedly
during playback,
repeatedly.
display window.
once
the
cur-
If you press REPEAT twice during playback, the all
MP3 files on the disc will play repeatedly.
appears in the display window.
If you press REPEAT three times, the repeat
be cancelled.
play
will
play the next file or previous file
during playback.
Press PAUSE ( ) to enter the pause mode, press
PLAY or PAUSE ( ) again to return to normal playback.
?
Press PREV./NEXT to select the desired MP3 file
of the selected
an
only displayed
For your reference
Press PREV./NEXT to
TRACK_1
:
Play
is
""
where
located and
name
the file is
If you press REPEAT
rent MP3 file will play
""
?
MP3 FILE
3
and file
If you select another file
screen.
2
PAGE 19
Press STOP
(
)
to
stop the playback.
PAGE 20
ADVANCED OPERATION
KARAOKE
Karaoke Function
To
Adjust ECHO
play KARAOKE(singing along) with CD by conmicrophone to the unit.
You can enjoy KARAOKE with a stereo-recorded disc,
even if it is a non-karaoke disc, by reducing the singer's
You
can
You
can
necting
a
give
microphone.
?
an
Press ECHO
Volume
echo effect to the sound from the
to
repeatedly
adjust
the
strength
of
echo.
voice.
ECHO-1, ECHO-2
ECHO-3 is
or
displayed
in the
display
window.
1
2
3
Press POWER to turn
the
on
player.
?To
Press CD
case
of
) to open the
disc with the label
OPEN/CLOSE(CD
disc compartment, load
side up.
In
a
a
VIDEO CD with PBC functions, "PBC"
display window. Press PBC to cancel
Change
You
can
Press FANFARE
(OPTIONAL)/SCORE
to enter
the karaoke mode.
"KARAOKE" appears in the
PREV./NEXT
on
(or turning
the disc
If you press the NUMERIC buttons, the
is started automatically.
playback
can
turn MULTI
to 15
-
#
)
buttons
that suits your vocal
key
steps (7 higher steps
with Karaoke
Yo u
during playing KARAOKE.
explanation section.
record
7
screen.
Recording
can
,
key).
otes
-
howling
Move the
occurs
microphone(s)
away from the TV
or
the
speakers.
-
Lower the volume of the TV
the mic volume.
or
Cancel ECHO function.
If the sound is distorted when the unit is con-
nected
-
a
TV
Cancel ECHO function.
through
the
microphone
is
extremely
loud
it may be distorted. In this case turn the MIC
volume toward minimum and set to "ECHO OFF"
ote
(OPTIONAL)
& Score
is finished, the score will appear
on the screen, and if you take the score 70 points
and over the fanfare sound comes out. And the unit
playback
automatically
track.
the
-
again.
Come out the Fanfare
will
(b
key
adjust
If sound
If the track
KEY CON
to find the
-
-
PLAY(
).
Sing along with the accompaniment.
JOG SHUTTLE
to suit your vocal range.
key
by
Press
or
the
lower steps and the original
The setting appears on the
If
For your reference
To play the next, press PREV./NEXT
Key (KEY CONTROL)
range.
MULTI JOG
SHUTTLE.
7
the
Refer to the "RECORDING"
screen.
Select the desired track number
change
repeatedly
You
volume.
6 pressing
To
Press KEY CONTROL
Connect your microphone to the MIC jack.
Turn the MIC VOLUME knob to adjust the micro-
phone
5
in
disappear
Select the CD function.
appears in the
it.
4
cancel it, set the echo indication
display window.
the
pause after
playing
back of each
by pressing ECHO.
REFERENCE
Selection
System
You
?
?
?
enjoy NTSC
can
(NTSC/PAL)
PAL discs
or
PAGE 21
the NTSC/PAL button to choose the
by using
appropriate system.
If you try to play back PAL disc with NTSC-TV. The unit will not play back the disc.
When the system of your unit does not coincide with the system of your TV, normal color
When you
play
L.MEMORY T.SEARCH
b-KEY CON-#
MPX
back NTSC disc with PAL-TV,
ECHO
discs may
produce
Position of
System
some
DISPLAY
Connected TV
Available disc
PAL
PAL
PA L VCD disc
NTSC
NTSC
NTSC VCD disc
MULTI system TV
NTSC/PAL disc
Select
FANFARE /
SCORE DIGEST NTSC/PAL
NTSC/PAL
TAPE 1
picture may not be displayed.
black bands at the top and bottom of the screen.
CD/
TAPE 2
KARAOKE
TAPE
NTSC
Disc
or
PAL
Requirements
This unit
can play back the following discs.
equipment has been designed to play discs bearing the identification logo shown
CD: compact disc recorded only with digital audio signals.
VIDEO CD : compact disc recorded with compressed digital audio and video signals.
This
Contents
Disc mark
Video CD
Audio
addition, this unit
Notes
This
player
can
on
play
a
CD-R
Disc
or
12 cm
74 minutes
8cm
20 minutes
12 cm
74 minutes
8cm
20 minutes
CD-RW that contains audio titles
conforms to Version 1.1 and Version
?
playback according
can
enjoy
to the discs
You
Type
two
Small
cause
type.
?
can
functions
disc)
Enjoy video playback (moving
pictures) as well as music.
Play
VIDEO CD with
PBC functions
(Version
2.0
discs)
MP3 files.
Because video disc
interactive software
using
the
enormous
reproduces data
regular disc,
in 1/100 of
minor scratch
without PBC
or
impact while video disc is playing
abnormality on pictures.
compressed
1.1
Time
CAUTION
VIDEO CD
(Version.
Playback
Video
VIDEO CD
2.0 of VIDEO CD standards. You
kinds of
Maximum
Disc Size
Audio
Audio CD
In
+
below.
as
on
its surface
influence
on
can
even a
can cause
video and audio and
make the disc unuseful. Therefore,
much more care is required.
even
?Amosaic
with faint checker
pattern
can
TV screen, in addition to the
with many
movements and detailed motion, however,
video
this is not
menu screens
playback
displayed
on
function of
appear
on
the
a
pictures
defect.
Version 1.1 discs.
otes
Discs should be kept clean at all times. -Stains, scratches and dust on disc's surface cause bad quality video and audio.
Never touch disc's surface.
Depending on the conditions of the recording equipment or the CD-R/RW disc itself, some CD-R/RW discs cannot
be played on the unit.
PAGE 22
REFERENCE
Troubleshooting
Check the
following guide
for the
possible
of
cause
a
problem
before
Cause
Symptom
No power.
?
Possible Solution
The power cord is disconnected.
?
Plug
the power cord into
outlet
No
picture.
?
The TV is not set to receive VCD
signal
?
output.
Select the
the TV
on
The video cable is not connected
?
securely.
?
There is
sound or
only a very low-level
sound is heard.
no
?
?
The
playback picture
is poor.
The unit does not start
?
The connected TV power is turned off.
The audio cables
not connected
are
?
on
?
Severe hum
heard.
or
noise is
?
cord is
connecting
The disc is
The disc is
damaged.
dirty.
The disc is
plugs
screen.
urn on
jacks
the TV.
Insert the audio cable into the
?
jacks
?T
urn on the external equipment
connected with the audio cable.
?
?
placed upside
The disc is not
The
the TV
Connect the video cables into the
?T
down.
?
playback.
?
appropriate video input mode
the picture from the unit
so
securely.
The power of the equipment connected
with the audio cable is turned off.
The audio
wall power
securely.
securely.
?
a
securely..
appears
?
service.
contacting
placed
within the
guide.
dirty.
and
?
?
jacks
are
Replace
new one.
Clean the disc.
Place the disc with the
down.
playback
Place the disc on the disc tray
inside the guide.
side
correctly
Clean the disc.
?W
dirty.
it with
ipe
them with
a
cloth
slightly
moistened
with alcohol.
?
?
?
The disc is
dirty.
?
The speakers and components
connected poorly.
The unit is located with TV
?
are
Clean the disc.
Connect the
speakers
and components
securely.
nearly.
?
Move your TV away from the audio
components.
Recording
cannot be
?
The components
are
connected
?
Connect the components
correctly.
incorrectly.
done.
?
The
source
is selected
incorrectly.
?
Select the source with the FUNCTION
SELECT button (CD, TAPE, AUX or
TUNER).
Radio stations cannot
be tuned in.
?
The antennas
are
connected
poorly.
?
?
The remote control
does not work properly.
?
The signal strength of the stations is too
weak (when tuning in with automatic
Connect the antenna
securely.
the antennas and connect
external antenna if necessary.
Adjust
?T
une
in the station
an
manually.
tuning).
?
?
?
?
The remote control is not pointed at the
remote sensor on the unit.
The remote control is too far from the
unit.
There is an obstacle in the path of the
remote control and the unit.
The batteries in the remote control
exhausted.
are
?
Point the remote control at the remote
the unit.
sensor on
?
?
?
Operate the
23ft(7m).
remote control within about
Remove the obstacle.
Replace
the batteries with
new ones
REFERENCE
PAGE 23
Specifications
MODEL
SECTION
Power
LM-V321A
LM-V621A
Power
External Dimensions
(W
x
H
x
D)
AM
SW (option)
[Amp]
[TAPE]
273
40
Frequency response
Signal-to-Noise Ratio
Dynamic range
FM
[Tuner]
LM-V620A
Refer to the back
Supply
Consumption
Weight (Approx.)
[Genral]
[VCD/ ]
LM-V320A
-
330
x
Designs
1.0 V, 75
Tuning Range
Intermediate Frequency
Signal-to-Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Signal-to-Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Output Power
87.5
T.H.D
0.15%
Frequency Response
Signal-to-Noise Ratio
Tape Speed
42
Wow Flutter
0.25%
F.F/REW Time
120sec
Frequency Response
Signal to Noise Ratio
Channel Separation
125
43dB
Erase Ratio
55dB
8.3kg
360
mm
Ω, RCA jack
108.0 MHz
-
or
65 -74 MHz, 87.5 -108.0 MHz
10.7 MHz
61/58 dB
60
-
(MONO/STEREO)
10000 Hz
522-1611kHzor530-1610kHz
450 kHz
35 dB
100
2000 Hz
-
5800
18000 kHz
-
450 kHz
30W
-
60W
25,000 Hz
80 dB
4.75cm/sec
-
50dB
(MTT-111, JIS-WTD)
(C-60)
8000Hz
(P/B)/ 43dB (R/P)
(P/B)/45dB (R/P)
(MTT-5511)
LMS-V320V
LMS-V620V
LMS-V321V
2
Type
Impedance
Frequency Response
Input Power
Max. Input Power
Net Dimensions (W x
Net Weight (Approx.)
Way
2
Speaker
LMS-V621V
3
Way
6Ω
80
Sound Pressure Level
-
20000 Hz
(1m)
30W
60W
H
are
x
200x326x236mm
D)
2.67
subject
to
change
3
Speaker
6Ω
87 dB/W
Rated
specifications
110W
6.8kg
(1 kHz)
(1 kHz)
70 dB
Video output
and
of the unit.
18000 Hz
70 dB
MODEL
[Speakrs]
x
panel
80W
kg
without notice.
60
-
20000 Hz
85 dB/W
(1m)
60W
120 W
200X326X236mm
3.96kg
P/NO :3828R-A076C
Download PDF

advertising