LG | LPC-D1000A | LG LPC-D1000A Owner’s Manual

ABANS_LPC-D1000(Eng)-30F
DVD RADIO CASSETTE
OWNER'S MANUAL
MODEL: LPC-D1000A/X/S
VIDEO CD
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Designs
and
specifications are subject
improvement.
without notice for
to
change
CAUTION
Use of controls
procedures
RISK OF ELECTRIC SHOCK
or
adjustments or performance of
specified herein may
other than those
result in hazardous radiation exposure.
DO NOT OPEN
Laser
CAUTION:TO REDUCE THE RISK OF
component in this product is capable of emitting
radiation not
ELECTRIC SHOCK DO NOT REMOVE
COVER(OR BACK)
exceeding
the limit for Class 1.
NO USER SERVICEABLE
PA RTS INSIDE. REFER SERVICING TO
CAUTION:INVISIBLE LASER RADIATION
QUALIFIED SERVICE PERSONNEL.
WHEN OPEN AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM.
LASERSTRALNING
AR OPPNAD STRALEN AR
VARNING:OSYNLIG
Explanation Graphical Symbols:
DENNA DEL
lightning flash with arrowhead
symbol, within an equilateral triangle
FARLIG.
The
intended to alert the
user
NAR
is
to the presence
of uninsulated
dangerous voltage within
product's enclosure that may be of
sufficient magnitude to constitute a risk of
Attention:Quand
s'exposer
aux
l'appareil est ouvert, ne pas
radiations invisibles du faisceau
laser.
the
electric shock to persons.
This label is located
on
the interior.
The exclamation
point within an
equilateral triangle is intended to alert the
user to the presence of important
operating and maintenance(servicing)
instructions in the literature accompanying
the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OF ELECTRIC
This
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
1 LASER
RAIN OR MOISTURE.
The CLASS 1 LASER PRODUCT label is located
To avoid electrical
shock, do
Refer
qualified personnel only.
servicing
to
not open the
cabinet,
The
or
apparatus should not be exposed to dripping
splashing objects filled with liquids, such as
vases, should not be
Do not install this
such
2
a
bookcase
placed
equipment
or
on
in
similar unit.
the apparatus.
a
confined space
Compact Disc player
product.
the exterior.
is classified
as a
CLASS
on
Contents
Introduction......................4-9
SymbolusedinthisManual................4
AbouttheSymbolDisplay..............4
NotesonDiscs..........................4
HandlingDiscs............................4
StoringDiscs.............................4
CleaningDiscs............................4
Operation......................16-27
AutoFunctionSelection...................16
SettingtheClock........................16
UsingtheSleepFunction.................16
.16
UsingMicrophone(OPTIONAL).
.
.
.
.
.
.
.
.
.
.
Timer.................................17
Disc-relatedterms........................6
.18
PresettingtheRadioStations.
ListeningtotheRadio....................18
TapePlayback..........................19
TapeRecording.........................19
PlayingaDVDandVideoCD.............20
FrontPanel.............................7
RearPanel..............................7
GeneralFeatures.......................20
NotesonTapes..........................4
TypesofPlayableDiscs...................5
Regionalcode..........................5
RemoteControl..........................8
DisplayWindow..........................9
.
.....
.
.....
PlaybackSetup.........................20
MovingtoanotherTITLE...................20
.20
Moving to another CHAPTER/TRACK
.
.
.
.
.
.
.
.
Search..................................20
InstallationandSetup............9-15
Pause..................................20
TheACPowerCordConnection..................9
Still Picture and
BatteryInstallation.............................9
SlowMotion..............................21
TVConnections........................10
AntennaConnection.....................10
RepeatA-B..............................21
Repeat.................................21
SoundAdjustment.......................11
TimeSearch.............................21
Mini
Frame-by-frame playback
.
.
.
.
.
.21
for Audio Stream & Surround mode 11
CameraAngle............................21
BYPASS.................................11
Zoom.................................22
SoundQualityAdjustment...................11
.11
(Extreme Dynamic Sound System)
SpecialDVDFeatures...................22
Glossary
XDSS
.
.
.
.
.
.
MarkerSearch.........................22
SURROUND.............................11
Checking
VolumeAdjustment........................11
TitleMenu...............................22
the contents of DVD discs: Menus
.
.
.
.22
MUTE...................................11
DiscMenu...............................22
HeadphoneSocket........................11
.11
MicrophoneSocket(OPTIONAL).
AdjustingTapespeed......................11
ChangingtheAudioLanguage...............22
ChangingtheAudioChannel.................22
.
.
.
.
.
.
.
.
.
.
.
On-ScreenDisplay......................12
PlaybackStatus/Restrictions................12
Subtitles...............................22
Playing an Audio CD or MP3/WMA
NotesonMP3/WMARecordings.
.
Disc
.
.
.
.
.
.
.
.
.
.
.
.
.
.23
.23
InitialSettings..........................13
Pause..................................24
GeneralOperation........................13
Language...............................13
?DiscLanguage.........................13
?MenuLanguage........................13
MovingtoanotherTrack....................24
RepeatTrack/All/Off.......................24
Picture..................................13
?TVAspect............................13
Others..................................14
?DynamicRangeControl(DRC).
.
.
.
.
.
.
.
.
.
.
.14
?Vocal.................................14
?PBC.................................14
?AutoPlay.............................14
ParentalControl...........................15
?Rating................................15
?CountryCode..........................15
Search.................................24
RepeatA-B..............................24
ChangingtheAudioChannel.................24
ViewingaJPEGDisc....................25
MovingtoanotherFile......................25
StillPicture...............................25
Toflipthepicture..........................25
Torotatepicture...........................25
NotesonJPEGRecordings.................25
Programmed Playback
with Audio CD
andMP3/WMADisc......................26
.26
Programmed Playback with Video CD
.
.
.
.
.
.
RepeatProgrammedTracks...............27
.27
ErasingaTrackfromProgramList
.27
ErasingtheCompleteProgramList.
LastConditionMemory...................27
SystemSelect..........................27
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Reference.....................28-30
LanguageCodes........................28
CountryCodes..........................28
Troubleshooting........................29
Specifications...........................30
3
Introduction
To
ensure proper use of this product, please read this
owner's manual carefully and retain for future
reference.
Notes
Handling
This manual
provides
information
on
the
operation
the unit require
and maintenance of your unit. Should
contact an authorized service location.
service,
Symbol
Discs
on
Discs
Do not touch the
the
disc
on
by
playback side of the disc. Hold
edges so that fingerprints do not get
the
the surface. Never stick paper
or
tape
on
the disc.
Used in this Manual
The
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk
After
of electric shock.
the disc to direct
Storing
playing,
leave it in
The exclamation
point alerts you to the
of
presence
important operating and
maintenance / servicing instructions.
Indicates hazards
unit itself
or
likely
to
cause
other material
harm to the
damage.
Discs
a
Cleaning
store the disc in its
case.
Do not expose
sunlight or sources of heat and never
parked car exposed to direct sunlight.
Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Note:
?
Indicates
notes and
special
features.
operating
Tip:
?
Indicates
tips
and hints for
making
the task easier.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
A section whose title has
is applicable only
symbol.
to the disc
"
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
WMA
WMA Discs
JPEG
JPEG Discs
"
Notes
records.
Tapes
on
Preventing
About the
vinyl
of the
following symbols
represented by the
one
record
Removing the tab(s) of the cassette (with a small
screwdriver) will prevent accidental erasure.
Side A
Tab for side A
Tab for side B
Symbol Display
may appear
your TV display during
operation and indicates that the function explained in
on
this owner's manual is not available
on
that
To record
adhesive
again,
cover
the hole of the tab with
tape.
specific
DVD video disc.
Adhesive
4
tape.
Types
of
Playable
Discs
DVD
(8cm/12cmdisc)
Video CD
(VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
In
addition, this unit plays DVD -R, DVD +R,
-RW, DVD +RW, SVCD, and CD-R / CD-RW that
contains audio titles, MP3, WMA, and JPEG files.
DVD
?
?
code
This unit is
Notes:
?
Regional
designed and manufactured
playback of region "5" encoded DVD
software. This unit can play only DVD
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD +R,
DVD -RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
for
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
?
Do not
use
shaped
or
(the
discs labeled "5"
Notes
DVDs and Video CDs
on
Some
playback operations
"ALL".
Codes
Most DVD discs have
clearly
a
globe
visible
on
number must match your unit
disc cannot play.
?
Notes
Regional
numbers in it
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
malfunctions.
on
or
5
with
the
one or more
cover.
regional
This
code
or
the
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears on the TV screen.
of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according
to disc content
manufacturer, therefore
not be available
or
designed by the software
playback features may
some
other functions may be added.
5
Disc-related terms
DVD±R/DVD±RW
DVD -R and DVD +R
PBC:
are
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
re-writable
Gigabytes
much. There
only
two standards for
media, meaning the DVD
erased and re-recorded.
4.38
are
Single-sided
content
discs
can
can
hold
and double-sided discs hold twice
are no
dual
layer single
be
as
sided recordable
Playback
Playback
Control
(Video
CD
only)
control is available for Video CD
(VCD)
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
CDs.
discs.
Title
VCD
(Video CD)
A title is
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along
with
quality
(DVD
stereo sound.
video discs
generally
a
only)
distinct section of
a
DVD disc. For
example the main feature could be title 1, a
documentary describing how the film was made could
be title 2, and cast interviews could be title 3. Each
assigned a reference number enabling you to
locate it easily.
title is
MPEG
MPEG is
an
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital and MPEG audio.
Chapter (DVD
A
chapter
film
is
or one
a
video discs
segment
interview in
of
a
a
only)
title such
series. Each
as a scene
chapter
in
a
is
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
may not be recorded.
MP3
MP3 is
a
popular compression format used for digital
yields very high near-CD quality.
audio files that
Scene
On
WMA
moving pictures
Windows media audio file. A
developed by
(VCD)
video CD with PBC
(playback control) functions,
pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
Microsoft
type of coding / decoding
Corp.
and still
JPEG
Joint Pictures
Expert Group.
file format that allows you to
on the number of colors.
JPEG is
save
compressed
images with no limit
a
Track
A distinct element of audiovisual
information, such
picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow
track of video
of audio.
6
as
the
(with multiple angles)
one
and several tracks
Front Panel
9
1
2
8
3
3
4
1.
?
RECORD/RECORD PAUSE
?
CD( )/STEP/SET/COUNTER RESET button
TUNING/TIME(-/+), CD SKIP/SEARCH
(/),TAPE REWIND/FAST
FORWARD (
/
) buttons
?
?
PRESET(-/+), CD
[TAPE REVERSE
PLAY
PLAY
(
(
(
)
button
) ,TAPE PLAY( )
) button:OPTIONAL]
5
6
3.
2.
)/CLEAR
LCD
CD DOOR
6.
REMOTE SENSOR
9.
FUNCTION SELECT buttons
?
XDSS button
?
AM/FM/BAND button
?
CD SYNC. button
?
REPEAT/RIF/FM MODE button
?
PROGRAM/MEMORY button
?TAPE
SPEED button
?TAPE
SPEED
?S
(-10%, +10%)
(DISPLAY WINDOW)
CD OPEN/CLOSE button
7.
button
?
LEFT/RIGHT SPEAKERS
5
buttons.
?STOP(
7
4.
8.
Introducin
?
VOLUME
?
TIMER button
?
CLOCK button
?
PLAY MODE button
(-/+)
TAPE DOOR
button
:
OPTIONAL
(PUSH EJECT)
indicator
TANDBY/ON
Rear Panel
10
17
11
16
12
15
13
14
10. FM ANTENNA
11
.
14.
MICROPHONE SOCKET
-
3.5mm.(OPTIONAL)
12. AM ANTENNA TERMINAL
13. AUDIO
Input/Output
Connectors
?
OPTICAL OUT Connector
?
S-VIDEO OUT Connector
?
VIDEO OUT Connector
15. AC POWER INPUT SOCKET
16. VOLTAGE SELECTOR
[OPTIONAL]
( PHONES)
17. HEADPHONE SOCKET
-
3.5mm.
7
Remote Control
1.
POWER button
2.
Function select buttons
(TUNER/BAND, DVD/CD, AUX)
3.
Numeric buttons
4.
TAPE FUNCTION buttons
?BACKWARD
1
):
OPTIONAL
FORWARD PLAY
FAST REWIND/FAST FORWARD PLAY
(
)
button
?
RECORD/RECORD PAUSE
?STOP(
3
5.
4
17
16
button
)
SET UP button
6.
MENU button
7.
?
PROGRAM button
?
SCAN(-
?
REPEAT button
?
SLOW(-
?
REPEAT A-B
?
SKIP(-
OPTIONAL
8.
9.
15
/
+)
t / T
buttons
+)
/
buttons
+)
10. DVD/CD CONTROL buttons
7
8
?STOP(
14
)
button
?P AUSE/STEP
9
10
?
PLAY
11 .?EQ
11
13.
button
)
button
)
PATTERN
(EQ)
button
SURROUND(SURR.)
?
XDSS button
?
AUDIO(
?
MARKER button
?
SEARCH button
?
S-TITLE button
13
12.
(
(
?
12
)
RETURN
?
CLEAR button
?
ZOOM button
?
SLEEP button
(
button
)
(-/+)
button
button
?
14. VOLUME
buttons
15. TITLE button
16.
?
ARROW buttons
?
SELECT/ENTER button
17. DISPLAY button
18. PRESET
(
19. MUTE button
8
(
buttons
18
6
(
?
19
2
5
PLAY
?
/
)
buttons
(
)
button
/
)
Display
Window
65
4
3
2
1
Introducin
7
1.
function indicator
2.
STEREO indicator
8
9
10
11
12
10.
13
14
RECORD/ RECORD PAUSE indicator
?
TIMER indicator
?
3.
REPEAT indicator
11.
4.
CHAPTER/TRACK indicator
12. MUTE indicator
5.
TITLE indicator
13.
6.
PROGRAM indicator
7.
MP3 file indicator
8.
Indicates current audio stream
9.
ANGLE active indicator
Installation and
with
end of the AC power cord
to the AC IN socket located at the
indicator
Installation
Remove the
battery
cover on
the
rear
of the
remote control.
2.
Insert two R03
3.
Replace
the AC power cord from the wall outlet if you
do not to use for an extended period of time.
Unplug
the
voltage (OPTIONAL)
If your unit is equipped with a voltage selector, be
to set it to your local power supplied before
sure
connecting
)
Remote Control
1.
?
Adjusting
(
(size AAA)
aligned correctly.
the
battery
batteries with
and
cover.
Notes:
Note:
?
TAPE PLAY MODE
Battery
backside of your unit.
Plug the other end into the wall outlet.
3.
indicators
Setup
that
one
)DIRECTION
14. SLEEP indicator
connecting the AC power cord, check
operating voltage of your unit is identical
voltage of your mains supply.
(supplied)
/
(OPTIONAL)
Before
Connect
2.
(
(OPTIONAL)
the
the
TAPE PLAY
?
?
The AC Power Cord Connection
1.
PLAY/PAUSE indicator
To avoid
damage
from
possible battery leakage,
the batteries if you do not plan to
unit for an extended period of time.
remove
?
When the batteries
batteries with
?
are
use
the
weak, replace all the
new ones.
Do not mix old and
new
batteries.
the AC power cord.
9
TV Connections
VIDEO OUT
connection
jack
Connect the VIDEO OUT
to
a
VIDEO IN
AUDIO OUT
jack
of
a
AUDIO IN
AUDIO IN
jack
of
jacks
or
on
the back of the unit
monitor.
connection
jacks
Connect the AUDIO OUT
to
jack
TV
a
jack
TV
a
or
on
AUDIO OUT
jack
a
TV
or
of the unit to
monitor.
To TV Video In
S-Video connection
Connect the S-VIDEO OUT
VIDEO IN
jack
on
the TV
jack on the unit
using the S-Video
OUT
optical input
connector (O).
an
S-VIDEO
to the S-
cable
VIDEO
VIDEO
.
To Video out
AUDIO AUDIO
OPTICAL OUT connection
Connect
Rear of UNIT
Monitor
the back of the unit
connection
jack on the back
of
or
monitor.
Connect the AUDIO IN
a
TV
of receiver to the OPTICAL
OUT
IN
To Audio out Jack
To Audio in Jack
Rear of UNIT
Notes:
?
?
Refer to the owner's manual of your TV as well.
When you connect the unit to your TV, be sure to
turn off the power and unplug both units from the
wall outlet before
making.
OPTICAL
IN
Rear of Receiver
Antenna Connection
Connect the
supplied AM(MW)
antennas for
listening
to the radio.
Note:
?
To
prevent noise pickup, keep the AM loop
antenna
AM
(MW) loop
(aerial)
(Supplied)
away from the unit and other components.
antenna
For AM
the
loop
(MW) reception, connect
antenna (aerial) to the
terminal marked AM
10
Sound
Mini
Adjustment
Glossary
for Audio Stream & Surround mode
The Dolby Digital surround format lets you enjoy up to
5.1 channels of digital surround sound from a Dolby
Digital program source. If you play DVDs with
mark, you can enjoy even better sound quality, greater
spatial accuracy, and improved dynamic range.
"
"
BYPASS
Software with multichannel surround audio signals is
played according to the way it was recorded.
Sound
Quality Adjustment
You can choose between 4 fixed sound settings.
Select a desired sound mode by using EQ button
the remote control.
FLAT
: linear frequency response
ROCK
: more bass, more treble
POP
: less bass, less treble
CLASSIC
: for orchestral music
on
Volume
Adjustment
Press VOLUME (+) to increase the sound
press the VOLUME (-) to decrease it.
Dynamic Sound System)
Press XDSS to reinforce treble, bass and the
surround effect. The "XDSS ON" or "XDSS OFF"
indicator lights. To cancel, press XDSS again.
or
MUTE
Press MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, the "MUTE" indicator flashes in
the display window.
Headphone Socket
Connect
a stereo headphone plug (
3.5mm) into the
headphone jack.
The speakers are automatically disconnected when
you plug in the headphones (not supplied).
Microphone Socket (OPTIONAL)
Connect
a microphone plug (
3.5mm)
microphone jack.
into the
Adjusting Tape speed
Select the
XDSS (Extreme
level,
0 /+10) you want by
repeatedly during the tape
tape speed (-10/
TAPE SPEED button
press
playback.
-10%
0%
+
10%
0%
SURROUND
To activate surround mode
Press SURR. to reinforce surround effect.
SURROUND OFF
↔
SURROUND ON
11
On-Screen
You
use
the
Some items
screen.
To
general playback status on the TV
can be changed using the menu.
on-screen display:
display
can
Display
the
1.
Press DISPLAY
2.
Press
Example: On-Screen Display during
playing DVD Video
Selection Method
Items
during playback.
Title Number
v
/ V to select
The selected item is
an
inputting
the title
highlighted.
number).
For
some
Chapter
functions,
press SELECT/ENTER to execute the
setting.
Notes:
?
?
Some discs may not
shown below.
If
no
provide
all of the features
button is
pressed for 10 seconds,
display disappears.
screen
b /
B,Numbers
SELECT/ENTER
Press b / B to change the setting. You can also
use the number buttons if appropriate (e.g.
3.
1/3
item.
the
on-
Number
1/12
Time search
0:20:09
Audio
language
Digital Audio
Output mode
B,Numbers
language
Angle
Numbers, SELECT/ENTER
b/Bor
and
Subtitle
b /
SELECT/ENTER
AUDIO
AB C
1 ENG
b/Bor
S-TITLE
b/B
1/3
Sound
BY PASS
Playback Status/Restrictions
Title
A-B
1/9
MARKER SEARCH
Repeat
title
Repeat
sequence
Enter
Marker
a
Marker Search
Example: On-Screen Display during
playing VCD
Selection Method
Items
menu
Track Number
Resume
Action
play
from this
prohibited
or
point
not available
(or
PBC
Time search
Audio Channel
Sound
12
1/3
b /
B, Numbers
SELECT/ENTER
mode)
Numbers
0:20:09
SELECT/ENTER
b/Bor
STER.
BY PASS
AUDIO
Initial
You
can
Settings
set your
own
Language
Personal Preferences
on
the unit.
Disc
Language
Select
General
1.
setup
Original
Other
menu
appears.
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
Menu, Audio, and
:
The
original language set for the disc is selected.
language, press number buttons to
corresponding 4-digit number according to the
To select another
language code list on
language code, press
Language
page 28. If you enter the wrong
CLEAR.
Disc Audio
Original
English
Disc Subtitle
Spanish
Code
Aspect
Menu
:
enter the
Press 3/4 to select the desired item.
TV
for the disc's
Subtitle.
Press SET UP.
The
2.
Operation
DVD
language
a
Disc Menu
French
Rating
German
Italian
Country
Chinese
TV
Polish
Menu
Spanish
Code
InstaliodSeup
Italian
Aspect
Chinese
Language
Polish
Hungarian
Hungarian
Other--------
Other-------Others
Others
The
screen
selected
will show the current
item,
as
well
as
setting for the
setting(s).
alternate
Menu
Language
Select
a
you
3.
4.
While the desired item is
selected, press
3/4
setting.
to select the desired
2,
see
language
Press SELECT/ENTER to confirm your selection.
require additional steps.
Press SETUP, RETURN,
or
PLAY to exit the
setup
menu.
This is the
menu
then
Disc Audio
English
Disc Subtitle
Spanish
Disc Menu
French
Rating
German
Country
Some items
5.
for the
when you press SETUP.
TV
Italian
Code
Aspect
Menu
Language
setup
menu.
Others
Picture
TV
Aspect
DVD
Disc Audio
4:3
Letterbox
Disc Subtitle
4:3
Panscan
Disc Menu
16:9 Wide
Rating
Country
TV
Code
Aspect
Menu
Language
Others
4:3 Letterbox: Select when
connected.
Displays
a
standard 4:3 TV is
theatrical
bars above and below the
4:3 Panscan: Select when
images
picture.
a
with
masking
conventional TV set is
connected. The video material formatted in the Pan &
Scan
style
picture are
is
played
off).
back in that
style (Both
sides of the
cut
16:9 Wide: Select when
a
16:9 wide TV is connected.
13
Others
The
DRC, Vocal, PBC and Auto Play settings
can
be
PBC
changed.
Press
3/4
to select the desired item and press
SELECT/ENTER. The
changed
setting
of the selected item is
between On and Off.
DRC
On
Disc Subtitle
Vocal
On
Disc Menu
PBC
On
Rating
Auto
TV
Playback
Control
(PBC)
are
Off: Video CDs with PBC
are
to On
or
Off.
played according to the PBC.
played the same way as Audio
CDs.
Disc Audio
Country
Set
On: Video CDs with PBC
Play
Auto
You
DVD
Play
set up the unit so a DVD disc automatically
playing whenever the DVD is inserted.
If Auto Play mode is set to On, this unit will search a
title that playback time is longest and then play back
title automatically.
Off
can
starts
Code
Aspect
Language
Menu
On: Auto
Off: Auto
Others
Play
Play
the
function is activated.
function is not activated.
Note:
Dynamic Range
Control
The Auto
(DRC)
With the DVD
format, you can hear a program's
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Then, you may listen
without
losing clarity
to
a
movie at
a
lower volume
of sound. Set DRC to On for this
effect.
Vocal
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
a
mix into normal stereo sound.
14
multi-channel karaoke
on
the disc will
Play
function may not work for
some
DVDs.
Parental Control
DVD
Rating
Movies
Country
DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
on
information that
certain
applies
to the
the disc. These
scenes on
disc
complete
to
or
scenes are
Enter the code of
Select
were
to the list
the 3/4 buttons
.
on
Code Set
US
Disc Menu
Rating
Country
Disc Subtitle
7
Menu
Disc Menu
6
Code
Aspect
Language
5
Rating
InstaliodSeup
4
Code
3
Aspect
Menu
using
Disc Subtitle
TV
TV
Code
whose standards
disc, referring
menu.
8
Country
country/area
Disc Audio
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
a
Country
the setup
are
The Parental Control feature allows
country-dependent.
DVD
used to rate the DVD video
1.
rated
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
Code
Others
2
Language
1
2.
While
3.
Follow
4.
Select the first character
5.
Shift the cursor using 2 button and select the
second character using 3 / 4 buttons.
Country
Unlock
Code is
selected, press 2.
Change
Others
1.
Select "Rating"
3/4 buttons.
2.
While
3.
When you have not entered a password.
Enter a 4-digit password using the number buttons
"Rating"
on
the
Setup
using
menu
is selected, press 2
the
.
personal 4-digit security password. then
press SELECT/ENTER. Enter the 4-digit password
again and press SELECT/ENTER to verify.
When you have already registered a password;
Enter a 4-digit password using the numbered
buttons to confirm the personal 4-digit security
password, then press SELECT/ENTER.
to create
a
mistake before
SELECT/ENTER, press
security password again.
pressing
CLEAR and enter
4-digit
Select a rating from 1 to 8 using the 3 / 4 buttons.
One (1) has the least playback restrictions. Eight
(8) has the most playback restrictions.
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
Ratings
1 to 8: Some discs contain
scenes
suitable for children. If you set a rating for the
all disc scenes with the same rating or lower
will be played. Higher rated scenes will not be
played unless an alternative scene is available on
the disc. The alternative must have the same rating
or a lower one. If no suitable alternative is found,
playback will stop. You must enter the 4-digit
password or change the rating level in order to play
the disc.
5.
Press SELECT/ENTER to confirm your rating
selection, then press SETUP to exit the menu.
left.
using
the 3/4 buttons.
Press SELECT/ENTER to confirm your country
selection, then press SETUP to exit the
menu.
Note:
Confirmation of the
when the code is
code"
4-digit password is necessary
changed (see "Changing the 4-digit
below.).
Changing
the
code
4-digit
Follow
Steps
(Rating).
2.
Enter the old code, then press SELECT/ENTER.
3.
Select Change using 3/4 buttons then press
SELECT/ENTER.
4.
Enter the
1-2
shown above to the left
1.
not
player,
on
code
a
If you make
4.
6.
step 3 of "Rating"
new
as
4-digit code,
then press
SELECT/ENTER.
5.
Enter exactly the same code a second
verify by pressing SELECT/ENTER.
6.
Press SETUP to exit the
If you
forget your 4-digit
menu.
code
If you forget your password, to clear the
password, follow the procedure below.
1.
2.
Press SETUP to
time and
display
the setup
Use the Number buttons to enter the
current
menu.
6-digit
number
"210499".
Note:
This function may not work for
The
some
DVDs.
3.
4-digit password
Enter
a new
code
is cleared.
as
shown above to the left
(Rating).
15
Operation
Auto Function Selection
Using
?
If you press CD PLAY (
function will be selected.
?
If you press PRESET (
/
) or TUNER/ BAND
during CD or CASSETTE play, radio function will be
)
while in radio
mode, CD
1.
(If
the clock is
2.
specify the time delay before the power is
turned off, press SLEEP.
In the display window shows "SLEEP 90" for about
5 seconds. This
automatically
Select
requires setting, press
than 2 seconds.)
pressing
cycle
or
TUNING/TIME
12 hour
means
that the
system
turns off
after 90 minutes.
Each time the button is
and hold
pressed the time interval
by 10 minutes. i.e.
before it turns off is reduced
more
24 hour
a
80...70... etc.
Select the desired time to turn off.
cycle by
2.
(-/+).
To check the
remaining
time until the power is
turned off.
While the
(12HR)
or
Press SET to confirm the selected hour
4.
Use TUNING/TIME
5.
Press SET.
6.
Use TUNING/TIME
sleep function is active press
briefly. The time remaining until it turns
displayed for about 5 seconds.
(24HR)
3.
(-/+)
has
To
Press CLOCK.
CLOCK for
Function
sleep timer is used, the power is
automatically turned off after the specified time
elapsed.
the Clock
Setting
Sleep
When the
1.
selected.
the
SLEEP
off is
Note:
If you press SLEEP while the
the SLEEP time is reset.
cycle.
to set the correct hour.
To cancel the
sleep
sleep
time is
displayed,
timer mode
If you wish to turn off the function, press the SLEEP
button repeatedly until "SLEEP 10" appears, and then
press SLEEP
(-/ +)
to set the correct
once
again
while "SLEEP 10" is
displayed.
minutes.
7.
Press SET and the correct time is shown
the
8.
on
display.
Press the CLOCK button at any time to
the time for about 5 seconds.
Using Microphone (OPTIONAL)
You
display
can sing to a music source by connecting a
microphone to unit.
1. Connect your microphone (not supplied) to
MIC socket.
2.
3.
Play a music you want.
Sing along with the accompaniment.
For your reference
can record during
You
Refer to the
16
using microphone.
"Recording" explanation section.
the
Timer
?
?
The unit is
TUNING/TIME
station, press DVD/CD
press FUNCTION button
to select the tape mode and insert a TAPE.
a
disc
Set the hour to switch
5.
and off at the
on
time you want.
Select your desired radio
button and load
1.
turned
automatically
6.
Press SET to confirm the hour to switch
7.
Set the minute to switch
on.
or
TUNING/TIME
Press CLOCK to check the current time.
For your reference
If you do not set clock, the timer function doesn't
Press TIMER to enter the timer
TUNER-CD-TAPE flashes in the
setting mode.
display window
on
by pressing
(-/+).
Press SET to confirm the minute to switch
8.
on.
"OFF" indicator appears for about 0.5 seconds
in the display window and then disappears.
work.
2.
by pressing
on
(-/+).
Set the hour to switch off
9.
in
TUNING/TIME
by pressing
(-/+).
turn.
For your reference
-To correct the previous
memorized TIMER
the TIMER button
-
The
previous
10. Press SET to confirm the hour to switch off.
press and hold
than 2 seconds.
setting,
more
memorized timer
on
11
.
TUNING/TIME
12. Press SET.
13.
Press SET when the desired function is
by pressing
(-/+).
time
and TIMER indicators appear in the dis
play window.
3.
Set the minute to switch off
Adjust
the volume level
TUNING/TIME
by pressing
(-/+).
flashing.
14. Press SET.
4.
a.
When you select the TUNER function, "PLAY"
and 'REC' indicator flash in the display
window
"REC" indicator
appears in the display window and the timer
setting has been completed.
for about 3 seconds.
alternately
"PLAY" indicator
""
:
:
TUNER
play only
TUNER play and
recording
15. Switch the
system into standby.
The selected function is
automatically
switched
on
and off at the times set.
b. Press SET when the desired function is
To cancel
flashing.
c.
Select the
previous
with TUNING/TIME
memorized
(-/+)
preset number
button and press
Each time the TIMER button is
the timer set
SET.
setting
"ON" indicator appears for about 0.5 seconds
in the display window and then
To activate
disappears.
When you select the CD
or
TAPE
check the timer
or
or
cancel. You
you can select
also check the timer
pressed
can
status.
timer, press the TIMER
appears in the display window.
To cancel the TIMER, press the TIMER button so that
button
""
so
or
that
check the
"
disappears
"
in the
display
window.
functions,
-"ON" indicator appears for about 0.5
seconds in the display window and then
disappears.
17
the Radio Stations
Presetting
You
Press AM /FM/BAND
remote
The last received station is tuned in.
preset
2.
Before
tuning,
make
Press
1.
AM(SW:
that you have
turned down the volume to the minimum.
OPTIONAL).
1.
Select
station you want
TIME (- / +) buttons.
a
in
by pressing
-
a
)onthe
the preset
station you want.
Each time you press the button, the unit tunes in
one preset station at a time.
-
Adjust the volume by
repeatedly.
3.
1
To listen to
station.
on
the front
panel.
Use manual
?
For automatic
on
VOLUME
(-/+)
non-preset radio stations
or automatic tuning in step
?
(-/+)
Press PROGRAM/MEMORY
A
/
(-/ +) or PRESET (
control) repeatedly to select
remote
manually
Press TUNING/TIME
tunes in
Press PRESET
2.
TUNING/
(-/+) briefly and
repeatedly.
Tuning in automatically
Press TUNING/TIME (- /+) for more than
second. Scanning stops when the unit
-
remote
sure
(or TUNER/BAND on the
control) to select the frequency (FM or
AM(SW:OPTIONAL)) you want.
Every time you press this button, FM and AM
changes alternately.
Tuning
3.
to the Radio
AM/FM/BAND(or TUNER/BAND on the
control) to select the frequency band
or
(FM
AM) you want.
Every time you press this button, FM and AM
changes alternately.
can
50 stations for FM and
Listening
the
tuning, press
front panel.
buttons
2.
and hold TUNING/TIME
To turn off the radio
preset number will flash in the display window.
Press
POWER(
STANDBY/ON) to turn the unit off
(DVD/CD or TAPE).
or
select another function mode
4.
Press PRESET
(
(-/ +:unit) or PRESET
control) to select the preset
:remote
/
number
you want.
For your reference
If an FM program is
?
Press FM/MODE
5.
Press PROGRAM/MEMORY
again.
so
noisy
display window. There will
the reception will improve.
The station is stored.
"
that "ST
be
no
disappears
stereo
in the
effect, but
Press FM/MODE
again
to restore the stereo effect.
6.
Repeat steps
1
(or 2)
to 5 to store other
?
stations.
When
recording
a
MW(AM) broadcast,
noises may occur. If it does, press RIF
"kHz" flash in the display window.
beat
once.
-
To delete all the memorized stations
Press and hold PROGRAM/MEMORY
?
on
the front
panel for about two seconds, "CLEAR ALL" flash in
display window and then press STOP()/CLEAR
again, the stations are deleted.
For your reference
If all stations have
-
the
already
been
preset number, follow the steps
To recall
entered,
FULL
appears
18
4-5.
presets
Press and hold PRESET
:remote
control)
or
(-/+:unit) or PRESET (
until the desired preset number
press it
the antenna to
repeatedly.
/
get
more
clear
reception.
AM antenna
This antenna is built within the unit and rotate
the unit for better
-
reception.
FM antenna
Pull the
message will appear in the display window for a
moment and then a preset number will flash. To change
the
Adjust
telescopic
antenna out
and direction for better
adjust
reception.
the
angle
Tape Playback
Tape Recording
Use
Wind the
tape
Use
normal
normal
only
Basic
tapes during playback.
Basic
2.
Insert
4.
Press TAPE PLAY (
) [or TAPE REVERSE
PLAY (
): OPTIONAL] button.
a
Recording
Open
To set the
STOP(
Recording
) during playback.
Play
(
Rewind
Press
(
)
/
or
)
stop, press PLAY(
Auto
Stop
Deck
After
playing
automatically.
the front
one
at the
)
panel or
during playback
point you.
tape,
stop
:
by
front
"
CD to
After the cassette
cassette.
plays
front
side, stops
reverse
repeatedly
reverse
1.
plays
1.
front and
Press REPEAT A-B button
2.
during
once
TAPE
playback.
set.
during
TAPE
playback.
-
-
-
The local
repeat ending point is
or
CD
)
or
PLAY(
)
on
the front
panel
or
recording
) during recording.
flashes in display window.
STOP(
).
Press CD SYNC. in stop mode.
displays
in the
window.
The
synchronized recording starts
automatically after about 8 seconds.
Notes:
?
repeat starting point is
Press REPEAT A-B button
2.
side, stops
Repeat (OPTIONAL)
-The local
to set the
synchro recording function dubs a complete
programmed titles automatically onto a
display
six
automatically.
Local
repeatedly
"REC" flashes and "CD SYNC"
After the cassette
REVERSE
Tape Synchronized Recording
CD and
automatically.
times
(AUTO
stop recording
The CD
and
Three times
REC"
-
plays
(backward play)
side, stops automatically.
or reverse
Twice
from Radio
Press TAPE
After the cassette
direction
direction.
(
To pause
Press (
To
Function
Display
blank
compartment.
the remote control.
The recording begins.
select direction of the cassette you want
pressing the PLAY MODE button.
Once
Press
2.
the unit
can
Pressing
or
:
side of the
Auto Reverse Deck
You
on
the remote control
on
a
BAND)
Press (
) on the front panel or the remote
control and then select the DVD/CD or
TUNER/BAND function.
"REC" flashes and holds the cassette in pause
mode.
Fast Forward
/
recording
only)
Press PLAY MODE
recording
1.
To
TUNER/
DECK model
Stop Play
Press
or
the cassette deck and insert
cassette into the cassette
cassette and close the cassette door.
3.
To
starts.
point recording
tapes.
Select the function (DVD/CD
you want to record.
1.
Open the cassette door by pushing TAPE
DOOR (PUSH EJECT) point.
2.
to the
Playback
Press FUNCTION to select tape function.
("NO TAPE" appears in the display window.)
1.
only
?
If you wish to record format specific track, select the
track with CD SKIP/ SEARCH (.m / M>)
(or SKIP . / > on the remote control) before
commencing CD synchro recording.
It is not possible to change the function whilst in
record mode.
set.
"TP A-B" appears in the display window.
This function repeats three times.
Note:
If is not
possible
to set this feature for less than 3
seconds.
19
Playing
a
DVD and Video CD
Playback Setup
Turn
on
DVD
General Features
VCD
Note:
the TV and select the video
input
Unless stated
source
connected to the unit.
Audio
the
system: Turn
input
source
on
the audio
system and select
connected to the unit.
OPEN/CLOSE to open the disc
Press
2.
Load your chosen disc in the
playback side facing down.
3.
OPEN/CLOSE to close the tray.
Press
READING appears on the TV screen, and
playback starts automatically. If playback does not
tray.
When
tray, with the
start, press PLAY.
some
cases, the disc
menu
might
disc has
a
another title
than
title, you
one
can move
to
follows:
as
Press
DISPLAY, then press the appropriate number
button
(0-9)
Moving
appear
more
1/3
DVD
to another TITLE
Moving
1.
In
otherwise, all operations described
the remote control. Some features may also be
available on the Setup menu.
use
to select
title/group
a
number.
to another CHAPTER/TRACK
1 /12
DVD
1/3
instead.
When
If
a menu screen
The
is
displayed
may be displayed first after
Video CD which offers a menu.
menu screen
DVD
or
loading
a
another
Use the 1 234 buttons to select the
title/chapter
view, then press SELECT/ENTER
you
or
MENU to return to the
menu screen.
Use the number buttons to select the track you want
Press RETURN to return to the
menu screen.
Menu
setting and the exact operating procedures
using the menu may differ depending on the
disc. Follow the instructions
on
the each
setup.
1.
briefly
DVD
or a
to
to
step back
to the
return
previous
If Parental Control is set and the disc is not within
Rating settings (not authorized),
the
4-digit
2.
regional
play discs
a
code
code.
that have
code different from your unit. The
this unit is 3 (three).
output
the DTS.
a regional
regional code
now
or M
during playback.
go into SEARCH mode.
Press SCAN m
or M
repeatedly to select the
required speed:
mX100 (backward) or MX2, MX4, MX16,
M X100 (forward). With a Video CD, the
Search speed changes: m X2, m X4, m X8,
(backward) or MX2, MX4, MX8, (forward).
m X2, m X4, m X16,
must be entered and/or the disc must be authorized.
DVDs may have
Your unit will not
the numbered buttons
VCD
Press SCAN m
The unit will
Notes:
20
chapter
follows:
For two-digit numbers, press
(0-9)in rapid succession.
Search
You also may set PBC to Off under
It is not
as
one
can move
Note:
menu
screen.
?
chapter/track
than
more
track, you
directly to any chapter during DVD playback,
press DISPLAY. Then, press 3 / 4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
to view.
?
one
To go
VCD
the
disc has
than
chapter/track.
Press TITLE
?
on a
more
Press . twice
to start
playback.
for
title
Press SKIP . or > briefly during
playback to select the next chapter/track or to
to the beginning of the current chapter/track.
DVD
want to
a
disc has
for
3.
To return to normal
play, press
PLAY.
sound the DVD disc which becomes
Pause
DVD
VCD
1.
Press PAUSE/STEP
2.
To return to
during playback.
playback, press
PLAY.
General Features
Still Picture and
DVD
1.
VCD
The unit will
You
2.
Video CDs
Frame-by-frame playback
Press PAUSE/STEP
1.
(continued)
can
pressing
now
during playback.
2.
advance the picture frame-by-frame
PAUSE/STEP repeatedly on the
by
DVD
Press SLOW t
The
to select the
or T
To exit slow motion
T
1/8,
T 1/4 or T 1/2
Repeat All
To exit
icon appears
a
third
Repeat
Off icon appears
the TV
on
screen.
On
a
the
setup
Video CD with
to
menu
reverse
is not
must set PBC to Off
PBC, you
use
the
Repeat
on
function.
0:20:09
DVD
-:--:--
1.
Press DISPLAY
during playback.
applicable
for
on
the
playing
The on-screen
screen.
The Time Search box shows the
time of
elapsed playing
the current disc.
A-B
A*
screen.
press REPEAT
Repeat mode,
Time Search
Video CD.
Repeat
the TV
on
The Time Search function allows you to start
at any chosen time on the disc.
mode, press PLAY.
in
screen.
second time.
a
display appears
playback
the TV
required
t 1/4 or t 1/2
Note:
Slow motion
on
Note:
during playback.
speed: t 1/16, t 1/8,
(backward), or T 1/16,
(forward).
3.
Track icon appears
time.
press PLAY.
will enter SLOW mode.
player
Use the SLOW t
2.
REPEAT
VCD
or T
Repeat
repeat the disc currently playing, press
The
Slow Motion
1.
To
The
3.
play,
repeat the track currently playing, press
The
go into PAUSE mode.
To return to normal
Track/All/Off
Repeat
REPEAT.
remote control.
3.
To
-
DVD
2.
VCD
AB
Within 10 seconds, press 3 / 4 to select the
Time Search icon in the on-screen display.
OFF
Operation
The "-:--:--" appears in the Time Search box.
To
1.
repeat
a
sequence in
a
title
or
3.
group:
Press REPEAT A-B at your chosen
starting
2.
A
*
"
appears
briefly
on
Press REPEAT A-B
the TV
again
screen.
sequence
3.
briefly
begins.
on
the TV screen, and the
repeat
Repeat
enter
an
Camera
TRACK
starts from the selected time
invalid
1.
To
-
ALL
The
Repeat Chapter/Title/Off
repeat the currently playing chapter, press
icon appears
To
repeat the title currently
REPEAT a second time.
The
3.
Repeat Chapter
Repeat
To exit
the disc. If you
current
Angle
Title icon appears
1/3
DVD
OFF
REPEAT.
2.
on
time, playback will continue from the
If the disc contains
DVD Video Discs
remove
point.
VCD
TITLE
CHAPT
hours, minutes,
in the box.
right
Within 10 seconds, press SELECT/ENTER to
confirm the start time.
Playback
To cancel the sequence, press REPEAT A-B.
DVD
the number buttons to
use
start time. Enter
numbers.
4.
"A B" appears
required
If you enter the wrong numbers, press CLEAR to
the numbers you entered. Then enter the correct
at your chosen end
point.
seconds,
enter the
and seconds from left to
point.
"
Within 10
the TV
1.
Press DISPLAY
display appears
screen.
playing, press
the TV
recorded at different
2.
to
a
different
during playback.
on
the
camera
The on-screen
screen.
Use the 12 buttons to select
The number of the current
on
Repeat mode, press
on
scenes
angles, you can change
angle during playback.
camera
angle
a
desired
appears
on
the
angle.
display.
screen.
REPEAT
a
third
time.
The
Repeat
Off icon appears
on
the TV
screen.
21
General Features
Zoom
DVD
(continued)
Checking
VCD
Press ZOOM
during playback
or
still
playback
to activate the Zoom function.
If you press ZOOM
increases up to six
the
repeatedly,
level
through
the
Use the 1 234 buttons to
zoomed picture.
3.
Press CLEAR to
DVDs may offer menus that allow you to access
features. To use the disc menu, press MENU.
Then, press the appropriate number button to select
special
an option. Or, use the 1 234 buttons
selection, then press Select/Enter.
resume
move
normal
If the current title has
the
function may not work for
The
DVD
DVDs.
some
can
nine
start
points
To enter
1.
menu can
a
playback
VCD
from
a
memorized
point. Up
to
To
remove
During disc playback, press MARKER when
playback reaches the spot that you want to
2.
Repeat step
a
The disc
To
2.
1.
the TV
During
1 to enter up to nine Marker
points
disc
playback, press
on
menu
will appear
on
the
4.
To
Playback
will appear
on
the
ABC
1 ENG
repeatedly during playback
languages.
to
see
the
Note:
2 and 3 to erase additional
Marker numbers.
22
DVD
screen.
The Marker number will be erased from the list.
remove
Subtitles
SEARCH.
Press CLEAR.
Repeat steps
VCD
different subtitle
playback, press
menu
a
repeatedly during playback to hear a
(STER., LEFT or RIGHT).
Press S-TITLE
disc
to hear
scene.
the MARKER SEARCH menu, press
Marked Scene
SEARCH.
repeatedly during playback
language or audio track.
the Audio Channel
Press AUDIO
Press 1 / 2 to select the Marker number that you
To
Language
D
Changing
want to erase.
5.
the Audio
different audio channel
will start from the Marked
remove
The MARKER SEARCH
4.
again.
screen.
a
SEARCH.
3.
displayed.
5.1 CH
different audio
Press SELECT/ENTER.
2.
Changing
Press AUDIO
SEARCH.
3.
During
is
the disc menu, press MENU
Marked Scene
Within 10 seconds, press 1/2 to select
Marker number that you want to recall.
1.
again.
DVD
menu
remove
DVD
a
The MARKER SEARCH
a
for the
1 ENG
2.
To clear
angles, spoken
options, and chapters
camera
briefly.
screen
disc.
To Recall
on
Press MENU.
memorize.
on
will appear
may appear.
the title menu, press TITLE
Disc Menu
1.
mark, follow these steps.
The Marker icon will appear
list
menu
menu
title.
be memorized.
can
menu, the
and subtitle
language
3.
You
a
Otherwise, the disc
screen.
MARKER SEARCH
1/9
your
or
paused image.
Marker Search
highlight
Press TITLE.
1.
playback
2.
zoom
to
DVD
Title Menu
Note:
The
the contents of DVD Video discs:
steps.
2.
return to the
magnification
DVD
Menus
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1.
DVD Features
Special
the MARKER SEARCH menu, press
If
appears, the feature is not available
on
the disc.
Playing an Audio CD and
Disc
CD
The unit
MP3
CD-ROM, CD-R
Before
on
WMA
playing
MP3/WMA
MP3/WMA
Recordings
read the notes
recordings,
on right.
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
files that have
The
player
can
not read
extension other than
the TV
on
About
go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
screen
appears
on
the TV
Recordings
An MP3 file is audio data
a
Audio
menu
MP3/WMA
MPEG1 audio
disc and close the tray.
CD; Audio CD menu appears
Insert
1.
recordings
on
CD-RW discs.
or
on
About MP3
MP3/WMA formatted
play
can
Notes
MP3/WMA
screen.
Go to
step
MP3 file that has
an
a
file
".mp3".
WMA(Window Media Audio)
An WMA file is
a Microsoft audio compression
technology.
WMA(Windows Media Audio) offers double the
audio compression of the MP3 format.
2
MP3 WMA
JPEG
Press 3/4 to select the MP3/WMA then press
SELECT/ENTER.
2.
The MP3/WMA
appears on the TV screen.
Press RETURN to move to the MP3/WMA-JPEG
choice
menu
menu.
MP3/WMA Disc
limited
1.
with this unit is
compatibility
follows:
Sampling Frequency / only at 44.1kHz (MP3),
44.1kHz (WMA)
Bit rate / within 32 320kbps (MP3),
32
128kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
32
2.
as
-
-
-
MP3 WMA
Program
3.
Folder1
4.
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
MP3/WMA files. We recommend that you use
which creates an ISO9660 file
Clear All
Folder8
"Easy-CD Creator",
OFF
00:00
Operation
system.
Press 3 / 4 to select
SELECT/ENTER.
3.
a
5.
folder, and
Press
3/ 4
to select
a
1st
track then press PLAY
Playback starts.
During playback, the current track's elapsed
playing time will appear on the display window
or
will
stop
Press MENU to
to the
previous
names
no
MP3/WMA files in
MP3/WMA file in the
playback
MP3/WMA
MP3/WMA files. If you
files, format all the
or use a new one.
should be named
using 8 letters
incorporate ".mp3" or ".wma"
or
e.g. "********.MP3"
or
"********.WMA".
7.
Donotusespecialletterssuchas"/:*?"<>"
8.
Total number of files
etc.
page.
on
the disc should be less
than 650.
Program
MP3 WMA
Program
CD
requires
extension
and
to the next page.
move
File
less and must
at the end of the disc.
move
cannot
playback
data in the disc
6.
menu.
Playback
session disc
track, it
wish to
SELECT/ENTER.
Press TITLE to
single
the first track. If there is
A list of files in the folder appears.
4.
A
TRACK01
This unit
TRACK 1
TRACK02
TRACK 2
TRACK03
TRACK 3
TRACK04
TRACK05
TRACK 5
TRACK06
playback quality.
TRACK 6
TRACK07
TRACK 7
Clear All
TRACK08
STER.
0: 56: 18
Audio CD
Clear All
TRACK 8
BYPASS
00:00
1
MP3/WMA
menu
OFF
menu
Tip:
?
If you
are
Folder
list,
in
file list and want to return to the
a
use
the 3/4 to
and press
highlight
previous menu
SELECT/ENTER to return to the
screen.
5.
To
requires discs/recordings
stop playback
Pre-recorded DVDs
set to these standards. There
are
are
optimal
automatically
many different types
of recordable disc formats
(including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
Customers should also note that
required
permission
is
in order to download MP3/WMA files and
music from the Internet. Our company has no
right to grant such permission. Permission should
always
at any other
to meet
certain technical standards in order to achieve
TRACK 4
be
sought
from the
copyright
owner.
time, press
STOP.
23
Pause
Repeat
1.
Press PAUSE/STEP
2.
To return to
during playback.
playback, press
PAUSE/STEP again.
PLAY
To
or
1.
press
repeat
Moving
to another Track
Press SKIP . or > briefly during
playback to go to the next track or to return
beginning of the current track.
Press SKIP. twice
previous
In
case
briefly
to
step back
sequence.
disc playback, press REPEAT A-B at
your chosen starting point.
CD,
icon and
"
A
Press REPEAT A-B
The
to the
Repeat
*
"
appears
again
the
on
menu screen.
at your chosen end
icon and "A B" appears
and the sequence
3.
to the
directly to any track,
using the numbered buttons
to go
enter the track number
Repeat
point.
track.
of audio
a
During
The
2.
A-B
begins
to
on
the
menu
screen,
play repeatedly.
To exit the sequence and return to normal
press REPEAT A-B again.
The
Repeat
icon and "OFF" appears
on
the
play,
menu
screen.
(0-9) during playback.
Changing
Repeat Track/All/Off
1.
To
Press AUDIO
Repeat
icon and "TRACK" appears
the
on
menu
screen.
2.
To
repeat all tracks
on a
disc, press REPEAT
a
second time.
The
3.
Repeat
To cancel
icon and "ALL" appears
on
the
menu screen.
Repeat mode, press
REPEAT
icon and "OFF" appears
on
a
third
time.
The
Repeat
the
menu
screen.
Search
1.
Press SCAN m/M
The
2.
player
will
now
during playback.
go into SEARCH mode.
Press SCAN m/M repeatedly to select the
required speed: mX2, mX4, mX8
(backward) or M X2, M X4, M X8 (forward).
Search
speed
and direction
are
indicated
on
screen.
3.
24
To exit SEARCH
mode, press PLAY.
the
menu
repeatedly during playback to hear a
(STER., LEFT, or RIGHT).
different audio channel
repeat the track currently playing, press
REPEAT.
The
the Audio Channel
Viewing
a
JPEG disc
JPEG
Before
JPEG
can play discs with JPEG files.
playing JPEG recordings, read the
Recordings on right.
Moving
This unit
Insert
1.
a
menu
to another File
on
Press SKIP .
or
>
once
to advance to the next file
disc and close the tray.
The MP3/WMA-JPEG choice
the TV
notes
appears
on
during viewing a picture
previous file.
to the
Still Picture
Press PAUSE/STEP
1.
screen.
or
during
slide show.
The unit will
now go into PAUSE mode.
To return to the slide show, press PLAY
MP3 WMA
2.
JPEG
press PAUSE/STEP
or
again.
Press 3/4 to select the JPEG then press
2.
SELECT/ENTER.
The JPEG
menu
To
on
appears
the TV
screen.
flip
the
picture
Press 3/4
during showing a picture
picture horizontally or a vertically.
JPEG
to
flip
the
Folder1
Folder2
Folder3
Folder4
To rotate
Folder5
Folder6
Folder7
Press 1/2
Folder8
Slide
Press
3.
3/4
to select
a
Speed
Off
folder, and SELECT/ENTER.
A list of files in the folder appears.
Press RETURN to move to the MP3/WMA-JPEG
choice
during showing
picture
clockwise
Notes
on
or
JPEG
Depending
a
picture
Recordings
upon the size and number of the JPEG
a long time for the unit to read the
disc's contents. If you don't see an on-screen
display after several minutes, some of the files
If you are in a file list and want to return to the
Folder list, use the 34 buttons on the remote to
highlight
Total number of files and folders
"
menu screen.
If you want to view a particular file, press 3 / 4
highlight a file and press SELECT/ENTER or
to
PLAY.
Viewing the file proceeding starts.
During viewing a file, press RETURN
the previous menu (JPEG menu).
Press TITLE to
Press MENU to
JPEG
move
move
previous
pixels
to
move
to
on
Folder1
Some disc may be incompatible due to different
recording format or condition of disc.
When you are using software such as
Creator" to burn the jpeg files into the
when
copying
File
them
names
shown
Picture2
into the CD
"Easy
CD
CD-R,
ensure
".jpg"
extensions
layout.
If the files have
to be read
Picture1
the disc should
be less than 650.
rename
page.
Operation
and burn another disc.
that all the selected files have the
to the next page.
to the
---
less than 2 mega
and press SELECT/ENTER to return to the
previous
big
are
reduce the resolution of the JPEG files to
too
"
to rotate the
counter clockwise.
files, it could take
menu.
Tip:
4.
picture
as
".jpe" or ".jpeg" extensions, please
as ".jpg" files.
without
by
".jpg"
extension will not be able
this unit. Even
JPEG
image
though
the files
files in windows
are
explorer.
Picture3
Picture4
Picture5
Picture6
Picture7
5/32
1024X768
Slide
Speed
Off
5/32
1024X768
Picture5.jpg
Tip:
?
There
are
three
viewing
Slide
Speed options: Fast,
to highlight the
to select the option
Normal, Slow, and Off. Press 1/2
Slide
Speed
then press 3/4
you want to use, and press SELECT/ENTER.
5.
To
s t op viewing at any other
The JPEG menu appears.
time, press STOP.
25
Programmed Playback
with Audio CD and
Programmed Playback
MP3/WMA Disc
The
Note:
function enables you to store your
favorite tracks from any disc in the player memory.
Program
Program
can
On
on
contain 30 tracks.
Press PROGRAM
E
The
on
during playback or
Program Edit
mode to enter the
stop
the
a
Video CD with
the
setup
Program
1.
1.
in the
2.
use
the
Program
function.
contain 30 tracks.
Press PROGRAM while
Program
menu
playback
is
stopped.
will appear.
Program
right
Program
VCD
E
TRACK 1
TRACK 2
Press PROGRAM to exit the
E
mark will
Edit
Program
TRACK 3
mode;
TRACK 4
TRACK 5
disappear.
TRACK 6
TRACK 7
Clear All
TRACK 8
2.
must set PBC to Off
Insert Video CD and close the tray.
The VCD
mode.
mark will appear to the right of the word
side of the menu screen.
can
PBC, you
to
menu
Note:
the
with Video CD
a track, then press SELECT/ENTER to
the selected track on the Program list.
Select
place
Repeat step 2
Program list.
3.
to
place
additional tracks
on
the
Note:
Press RETURN
or
PROGRAM to exit the
Program
menu.
3.
Program
CD
E
TRACK 1
TRACK 12
TRACK 2
TRACK 8
TRACK 1
TRACK 2
TRACK 3
TRACK 10
TRACK 2
TRACK 4
TRACK 4
TRACK 3
TRACK 3
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 6
TRACK 7
TRACK 7
Clear All
TRACK 8
0: 56: 18
STER.
Clear All
TRACK 8
BYPASS
Audio CD
00:00
OFF
3
MP3/WMA
menu
menu
Press 2.
The
on
5.
E
programmed
track you selected last is
highlighted
the program list.
Press 3/4 to select the track you want to start
playing.
Press TITLE to
move
Press MENU to
6.
move
to the next page.
to the previous page.
Press PLAY to start.
Playback begins in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback stops after all of the tracks on the Program list
have
7.
To
played
once.
playback from
programmed playback, select a track of
CD (or MP3/WMA) list and then press
resume
normal
SELECT/ENTER.
"PROG." indicator
26
Follow
steps 2-6 of "Programmed Playback
with Audio CD and MP3/WMA disc"
on
left.
TRACK 8
TRACK 5
4.
Program
MP3 WMA
disappears
on
the
menu screen.
4.
To
playback from
programmed playback, press PROGRAM.
resume
normal
"PROG." indicator
disappears
in the
display
window.
To
Last Condition
Tracks
Repeat Programmed
DVD
repeat the track currently playing, press
Repeat
icon and "TRACK" appears
on
the
menu
screen.
To
repeat all tracks
REPEAT
The
a
Repeat
To cancel
on
the program
list, press
icon and "ALL" appears
Repeat mode,
off the
the
on
menu screen.
press REPEAT
a
icon and "OFF" appears
on
the
menu screen.
a
Track from
Program
List
Press PROGRAM
during playback (Audio CD
only) or in the stop mode
Program Edit mode.
and MP3/WMA disc
to enter the
E
The
3.
Press 2 to
3/4
Use
move
to the
Program
list.
to select the track that you wish to
from the
Program
list.
a
disc that has its
settings
recalled.
?
the
Follow
List"
System
1-2 of
Select
appropriate system mode for your
system. If NO DISC appears in the display
window, press and hold PAUSE/STEP remote control
for more than 5 seconds to be able to select a system
(PAL, NTSC, or AUTO).
the
Program
Complete Program
steps
as
Settings are stored in memory for use any time.
This unit does not memorize settings of a disc if you
switch off the unit before commencing to play it.
When the selected
Press CLEAR.
Erasing
2.
If you load
TV
The track will be erased from the
1.
player.
You must select the
mark will appear.
erase
4.
for the last disc
Notes:
Repeat
Erasing
2.
settings
third
?
1.
user
that you have viewed. Settings remain in memory
even if you remove the disc from the player or switch
memorized, the latest stop position is automatically
second time.
time.
The
Memory
VCD 1.1
This unit memorizes the
REPEAT.
The
CD
"Erasing
a
list.
not be
List
Track from
system does not coincide with
system of your TV, normal colour picture may
displayed.
AUTO:
Select when unit is connected with
NTSC:
Select when unit is connected with NTSC-TV.
PAL:
Select when unit is connected with PAL-TV.
Multi
Program
above.
system TV.
Operation
Use 3 / 4 to select "Clear All", then press
SELECT/ENTER.
The
complete Program
The programs
are
for the disc will be erased.
also cleared when the disc is
removed.
27
Reference
Language Codes
Use this list to
Disc
your desired
language
for the
following
initial
settings:
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yo ruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Country
Choose
a
8373
8471
8479
Codes
country code from this list.
Country
Afghanistan
Argentina
Code
Code
Country
Malaysia
Code
ET
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
AR
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
AF
Country
Code
Country
Ethiopia
Fiji
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
Czech
28
input
Audio, Disc Subtitle, Disc Menu.
Republic
UG
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
Troubleshooting
Check the
following guide
for the
possible
Symptom
of
a
problem
before
?
?
picture.
Correction
The power cord is disconnected.
?
The TV is not set to receive DVD
?
signal
?
is
the power cord into the wall
securely.
Select the
mode
The video cable is not connected
?
securely.
playback picture
Plug
outlet
appropriate
video
input
picture from
the TV
so
the
the unit appears
on
the TV
output.
?
The
service.
contacting
Cause
No power.
No
cause
on
screen.
Connect the video cable into the
jacks
securely.
The connected TV power is turned off.
?
The disc is
?
No disc
?T
urn on
the TV.
?
Clean the disc.
?
Insert
a
disc
?
Insert
a
playable
?
Place the disc with the
dirty.
poor
The unit does not start
playback.
?
?
An
or
tape is inserted.
unplayable
The disc is
disc
or
tape
placed upside
is inserted
down.
or
tape
disc
or
tape.
playback
side
down.
?
?
The disc is not
The disc is
?Amenu
is
placed
within the
guide
dirty.
on
the TV
?
?
screen.
Place the disc on the disc
inside the guide.
?
Clean the disc.
Press the SET UP button to turn off
the
?
?
The remote control does
not work
properly.
The
Rating
The remote control is not
remote
?
level is set.
sensor
at the
?
of the unit.
menu screen.
Cancel the
the
pointed
rating
Rating
function
of the unit.
?
Operate the
23ft(7m).
?
There is
?
Remove the obstacle.
?
Replace
path
of the
change
Point the remote control at the remote
sensor
The remote control is too far from the unit.
obstacle in the
or
level.
?
an
tray
correctly
remote control within about
remote control and the unit.
?
The batteries in the remote control
are
the batteries with
new ones.
exhausted.
29
Specifications
Power
Power
5.1kg
External dimensions
CD/ VD
FM
AM
SW
(MW)
(option)
[TAPE]
Designs
30
Refer to the mainlabel of the unit
Mass
[Genral]
[Tuner]
Refer to the mainlabel of the unit.
supply
consumption
(W
x
H
x
D)
475
180
x
x
260
Output Power
Speakers
5WX2
Laser
Semiconductor
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
Tuning Range
Intermediate Frequency
Tuning Range
Intermediate Frequency
Tuning Range
Intermediate Frequency
Recording System
Frequency Response
Signal to Noise Ratio
PAL
and
specifications
mm
6ΩX2
are
subject
laser, wavelength
625/50, NTSC 525/60
650
nm
(DVD),
100Hzto18kHz
More than 75 dB
(1 kHz,
with
IHF-A)
More than 85 dB
0.7 %
(1
65 -74
kHz with 30 kHz
MHz,
LPF)
87.5 -108 MHz
or
87.5 -108 MHz
10.7 MHz
522
-
1611
kHz,
530
-
1610 kHz
450 kHz
5800
-
18000 kHz
450 kHz
4 Tracks 2 channel stereo
125
-
8000Hz
43/45dB
to
change
(REC/PLAY)
without notice.
or
530-1720 kHz
780mm
(CD)
P/NO :3834RC0030F
Download PDF