LG | LX-D3350A | LG LX-D3350A Owner’s Manual

ABANS_LX-D3350A_ENG_78N
DVD MICRO HI-FI SYSTEM
OWNER'S MANUAL
MODEL
:
LX-D3350
(LX-D3350A/D/X, LXS-D3350V, LXS-D3350W)
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Designs and specifications
improvement.
are
subject
to
change
without notice for
Precautions
Safety
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
This
shock to persons.
The exclamation
point
is intended to alert the
within
user
an
equilateral triangle
to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
WARNING: Do not install this equipment in
such as a book case or similar unit.
a
confined space
CAUTION:
This unit
To
employs
ensure
manual
proper
a
Laser
use
System.
of this
product, please read this owner's
carefully and retain for future reference should the
require maintenance, contact
(see service procedure).
an
unit
authorized service location
It is forbidden
Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
vases, should be
placed
on
NOTES ON COPYRIGHTS:
the apparatus.
by law to copy, broadcast, show, broadcast
via cable, play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
SERIAL NUMBER: The serial number is found
on
the back of
this unit. This number is
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
2
___________________________________
___________________________________
to
Table of Contents
INTRODUCTION
.23-25
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............23
.
SafetyPrecautions.........................2
.
.
.
.
.
.
TableofContents..........................3
GeneralFeatures.....................23-25
BeforeUse..............................4-5
MovingtoanotherTITLE...............23
23
Moving to another CHAPTER/TRACK
PlayableDiscs...........................4
Precautions.............................5
NotesonDiscs..........................5
.
.
.
.
.
Search.............................23
Still Picture and
Frame-by-Frame Playback
.
24
AboutSymbols..........................5
SlowMotion.........................24
FrontPanel/RearPanel.....................6
RemoteControl............................7
Repeat............................24
RepeatA-B.........................24
TimeSearch........................24
PREPARATION
LastSceneMemory...................24
Connections............................8-10
Zoom..............................25
ConnectingtoaTV.......................8
ConnectingtoAntenna.....................9
SpeakerSystemConnection................9
.10
ConnectingtoAuxiliaryEquipment.
.10
ConnectingtoOptionalEquipment.
BeforeOperation.......................11-19
VolumeAdjustment.......................11
SubwooferlevelAdjustment...............11
MarkerSearch.......................25
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
MUTE................................11
SoundQualityAdjustment.................11
SURROUND............................11
XDSS(ExtremeDynamicSoundSystem).
OAO (Orientation Acoustic Optimizer) ON/OFF
.
.
.
.
.
.
.
.
.11
.
11
DIMMER..............................11
SettingtheClock........................12
SleepTimerFunction.....................12
.12
UsingMicrophone(OPTIONAL).
.
.
.
.
.
.
.
.
.
.
.
TimerFunction..........................13
Mini
Glossary
for Audio Stream & Surround Mode 14
SoundMode...........................14
GeneralExplanation......................15
On-ScreenDisplay.......................15
InitialSettings........................16-19
GeneralOperation....................16
LANGUAGE........................16
DISPLAY...........................17
AUDIO.............................18
OTHERS...........................18
LOCK(ParentalControl)...............19
OPERATION
OperationwithRADIO...................20-21
Presettingtheradiostations................20
Listeningtotheradio.....................20
RDSFunction-OPTIONAL................21
SpecialDVDFeatures....................25
TitleMenu..........................25
DiscMenu..........................25
CameraAngle.......................25
.25
ChangingtheAudioLanguage.
.25
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Subtitles...........................25
Operation with Audio CD and MP3/WMA Disc
Playing an Audio CD and MP3/WMA Disc
.
.
26-27
.
.
.
26
Pause.............................27
MovingtoanotherTrack...............27
RepeatTrack/All/Off..................27
Search.............................27
OperationwithJPEGDisc...................28
ViewingaJPEGdisc.....................28
SlideShow.........................28
MovingtoanotherFile.................28
StillPicture.........................28
ProgrammedPlayback.....................29
.29
RepeatProgrammedTracks
.29
ErasingaTrackfromProgramList.
.29
ErasingtheCompleteProgramList.
OperationwithDivXDisc...................30
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
REFERENCE
Troubleshooting..........................31
LanguageCodeList.......................32
CountryCodeList.........................33
Specifications............................34
About the
symbols
for instructions
Indicates hazards
itself
or
other
AboutRDS.........................21
ProgrammeSearch(PTY)..............21
OperationwithTAPE......................22
BasicPlayback.........................22
ToStopPlay...........................22
TapeCounterReset......................22
.22
ToPlayRewindorFastForward.
22
Recording from Radio, CD or Auxiliary source
CD-SynchroRecording...................22
.
likely to cause
material damage.
Indicates
special operating
Indicates
tips
and hints for
harm to the unit
features of this unit.
making
the task easier.
.
.
.
3
INTRODUC
Before Use
Playable
Disc-related terms
Discs
Title
DVD
The main film content
(8cm/12cmdisc)
or
(VCD)
(8cm/12cmdisc)
you to locate it
Audio CD
(8cm/12cmdisc)
DVD±R, DVD±RW,
CD-RW that contains audio titles,
can
play
or
accompanying
feature content
additional feature content, or music album.
Each title is assigned a title reference number
Video CD
In addition, this unit
(DVD only)
a
SVCD, and CD-R or
MP3, WMA, JPEG or DivX files.
enabling
easily.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
(Video CD and audio CD only)
Sections of a picture or a musical piece on a video CD
or an audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
Track
Notes
--
--
--
Depending
the conditions of the
recording equipment or the CD-R/RW (or DVD±R/RW) disc itself,
some CD-R/RW (or DVD±R/RW) discs cannot be
played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
Notes
on
on
Scene
On
video CD with PBC
(Playback control) functions,
moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
you to locate the scene you want.
A scene is composed of one or several tracks.
DVDs and Video CDs
Some
of video CDs
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
Types
other functions may be added.
Refer also to the instructions supplied with the DVDs
with the
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
of
or
DVDs labelled
will also
of the
this system.
If you try to play any other DVD, the message "Check
Regional Code" will appear on the TV screen.
ALL
the DVD,
Depending
on
be labelled
even
area
4
restrictions.
play
on
region code indication may
though playing the DVD is prohibited by
no
are
two
types of video CDs:
Video CDs
equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
functions, or other
typical computer-like operations. Moreover, still pictures
high
system via
resolution
menus, search
can
be
played
if
they
are
included in
the disc.
Video CDs not
code of the DVD
player and DVDs
Your system has a region code printed on the back
unit and will only play DVDs labelled with the same
region code.
Regional
There
equipped
with PBC
(Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Before Use
Storing
Precautions
After
the unit
Handling
shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
When
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
near
or
radio,
turn off the
or
use
volatile
such
liquids,
as
leave marks
there may be a considerable temperature
increase inside the car.
light,
as
Cleaning
discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the center out.
on
insecticide spray,
or
the surface.
Do not
To clean the cabinet
soft, dry cloth. If the surfaces
soft cloth
lightly
solution. Do not
benzine,
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
the unit
Cleaning
use a
store the disc in its case.
plastic products in
long period of time. They will
the unit. Do not leave rubber
a
playing,
the exterior surfaces clean
contact with the unit for a
Use
discs
use
thinner,
or
are
moistened with
a
extremely dirty,
mild detergent
strong solvents such
as
these
as
might damage
alcohol,
the surface
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for older
About
vinyl
records.
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Handling
Discs
discs
Do not touch the
Hold the disc
get
on
playback side of the disc.
by the edges so that fingerprints
the surface.
Do not stick paper
or
tape
on
the disc.
will not
on
DVD
VCD
Video CDs
CD
Audio CDs
MP3
MP3 disc
WMA
WMA disc
JPEG
JPEG disc
screen
for instructions
following symbol is
represented by the symbol.
one
to the disc
DVD
DivX
during operation.
explained in this owner's
that specific DVD video disc.
symbols
A section whose title has
applicable only
Notes
symbol display
of the
DivX disc
5
INTRODUC
Front Panel/ Rear Panel
14
13
1
12
15
11
2
10
9
3
16
4
17
8
AUX
18
5
7
6
SUB WOOFER
(6 )
19
20
21
POWER
1.
2.
?
button
STANDBY/ON)
(
Z PUSH EJECT
7.
8.
CLOCK button
?
?
?
TIMER button
4.
?
?
?
?
?
?
?
(-/+)
(B)
CD SKIP
buttons
11
(b)
button
STOP
bb/BB
>)
,
TAPE REWIND/
([])/STEP
(x)/CLEAR
buttons
>)
15.
?
button
button
OAO button
RECORD/ RECORD PAUSE
HEADPHONE SOCKET
5.
6.
?
?
?
?
?
?
6
EQUALIZER
(EQ)
button
(
(zREC/[])
PHONES)
-
button
(Y
Pb
Pr) Connector
MONITOR OUT Connector
S-VIDEO OUT Connector
OPTICAL OUT Connector
16. FM/AM ANTENNA Connector
3.5mm
button
17. VOLTAGE SELECTOR
18. AUX INPUT
PLAY MODE button
SET/COUNT. RESET/RDS
COMPONENT VIDEO OUT/ PROGRESSIVE
SCAN
?
?
(Z)
14. CD TRAY
?
?
OPTIONAL
REMOTE SENSOR
?
?
:
OPTIONAL
13. DISPLAY WINDOW
FAST FORWARD (. bb/BB
TUNING (-/+) buttons
CD PAUSE
.
12. OPEN/CLOSE
button
(.
(MIC)
:
(TUNER/BAND, DVD/CD, TAPE, AUX)
TAPE REVERSE PLAY
PLAY
MIC JACKS
(MIC VOL.)
10. FUNCTION SELECT buttons
VOLUME knob
PRESET
MIC VOLUME KNOB
WOOFER LEVEL knob
9.
XDSS button
3.
position
:
OPTIONAL
(L/R)
19. SUB WOOFER OUTPUT
(OPTIONAL)
CD SYNCHRO RECORDING
MODE/RIF button
PROGRAM/MEMORY button
button
(CD SYNC.)
button
20. SPEAKER Connector
21. POWER CORD
Remote Control
POWER
MUTE
20
1
TUNER/BAND
DVD/CD
AUX
2
1.
POWER button
2.
FUNCTION SELECT buttons
3.
(TUNER/BAND, DVD/CD, AUX)
NUMERIC buttons (0-9)
4.
TAPE FUNCTION buttons
-
-
19
PRESET
-
3
-
-
REVERSE PLAY
PLAY
(B)
REWIND/ FAST FORWARD PLAY
RECORD/ RECORD PAUSE
TAPE STOP
SET UP button
6.
ARROW buttons
(For
use
in
highlighting
DISPLAY
18
5
6
on a
GUI
menu
screen.)
7.
SELECT/ENTER button
8.
MENU button
9.
display the menu screen
included on DVD video discs.)
SCAN (bb/BB)/ SLOW (t/T)/SKIP (./>)
(Use
SELECT
/ENTER
(z/[])
selection
a
screen, TITLE and MENU
SET UP
(bb/BB)
(x)
5.
4
INTRODUC
(b: optional)
the MENU button to
buttons
7
MENU
TITLE
17
8
9
PROGRAM
10. PROGRAM/ REPEAT/ REPEAT A-B buttons
11.
12.
SCAN
STOP
(x), PAUSE/STEP, PLAY (B) buttons
EQUALIZER (EQ)/ OAO/ SOUND/ AUDIO/ CLEAR
/ ZOOM buttons
SLOW
REPEAT
16
10
REPEAT A-B
SKIP
13. DIMMER/ SLEEP/ ECHO buttons
14. SURROUND
(SURR.)/ XDSS/ SUBTITLE (S-TITLE)
RETURN / MARKER/ SEARCH buttons
STOP
PAUSE/STEP
16. VOLUME -/+ buttons
PLAY
11
17. TITLE button
EQ
OAO
SURR.
XDSS
(Use
the TITLE button to
included
SOUND
AUDIO
S-TITLE
RETURN
CLEAR
ZOOM
MARKER
SEARCH
14
12
display
discs.)
DVD video
on
the title
screen
18. DISPLAY button
19. PRESET
(
/
)
buttons
20. MUTE button
DIMMER
SLEEP
ECHO
13
Remote Control
Remote control
Operation Range
Point the remote control at the remote
sensor
battery
and press
Detach the
the buttons.
Distance: About 23 ft
the
(7 m)
battery
cover on
of the remote control,
and insert two R03 (size AAA)
from the front of the
remote sensor
Angle:
installation
rear
batteries with
About 30° in each direction of the front of the
and
aligned correctly.
remote sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
Connections
Connecting
Make
the
to
a
TV
of the
following connections, depending
capabilities of your existing equipment.
one
ips
Depending
on
Progressive Scan (ColorStream
If your television is
your TV and other equipment you wish
to connect, there are various ways you could connect
the unit. Use one of the connections described
below.
best connections.
connection
high-definition or "digital ready"
television, you may take advantage of the units progressive scan output for the highest video resolution
possible.
If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the unit.
on
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
pro)
a
Connect the COMPONENT VIDEO/ PROGRESSIVE
SCAN
on
the
jacks from the unit to the corresponding
TV using an optional Y Pb Pr cable (C).
in
jacks
Caution
--
Make
sure
the unit is connected
Select the correct AV
--
directly
to the TV.
ote
your TV.
Do not connect your unit to TV via your VCR. The
DVD image could be distorted by the copy protection
input
on
--
Set the
Progressive to "On" on the Setup
progressive signal, see page 17.
menu
for
system.
Rear of TV
Video connection
Connect the MONITOR OUT
VIDEO IN
jack
on
the TV
jack from the unit to the
using the video cable supplied
(V).
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Pr
Pb
VIDEO
S-VIDEO
IN
IN
Y
L
S-Video connection
Connect the S-VIDEO OUT
VIDEO IN
jack
Component
on
the TV
Video
jack on the unit to the Susing the S-Video cable (S).
(Color Stream )
connection
C
V
Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN
jacks
on
the
jacks from the
TV using an Y
unit to the
Pb Pr
corresponding
cable (C).
in
AUX
8
S
Connections
Connecting
to Antenna
Connect the
-
-
supplied FM/AM antennas for listening
Connect the AM loop antenna to the AM antenna
to the radio.
PREATION
connector.
Connect the FM wire antenna to the FM antenna connector.
otes
To prevent noise pickup, keep the AM
antenna away from the unit and other
loop
component.
fully extend the FM wire antenna.
After connecting the FM wire antenna, keep
it as horizontal as possible.
Be
AUX
sure
to
Speaker System Connection
Connect the
speaker
cords to the
speaker
connector.
AUX
SUB WOOFER (6
)
otes
Be
are
sure
to match the
speaker
cord to the
appropriate
terminal
on
the components:
+
to
+
and
--
to
--.
If the cords
reversed, the sound will be distorted and will lack base.
If you use front
the speakers.
speakers
with low maximum
Do not disassemble the front
cover
of
input rating, adjust
the volume
carefully
to avoid excessive
output
supplied speaker.
9
on
Connections
to
Connecting
can use
VCR
Connect
a
You
or
VCR
Auxiliary Equipment
other unit connected to the AUX connector.
or
auxiliary device,
etc to the AUX connector.
1
Select AUX function pressing the AUX button
2
on
the unit
or
the remote control.
VCR
(or Auxiliary Device, etc)
IN
OUT
VIDEO
AUDIO
(L)
AUDIO
(R)
To AUDIO OUT
X
To AUDIO IN
Connecting
Connecting to
equipped with
to
an
a
Optional Equipment
amplifier equipped
with two channel
multi-channel decoder
digital stereo (PCM)
(Dolby DigitalTM or MPEG 2)
Connect the OPTICAL OUT connector of this unit to the
corresponding
in
jack
or to an
on
your
Audio/ Video receiver
Amplifier
or
Receiver.
Amplifier or Receiver
(or Digital Device, etc)
AUX
ote
If the audio format of the
strong, distorted sound
10
digital output
or no
does not match the
sound at all.
capabilities
of your unit, the receiver will
produce
a
Before
Volume
SURROUND
Adjustment
VOLUME knob clockwise to increase the sound
?Turn
level,
?
Operation
Press SURROUND
counterclockwise to decrease it.
or
Use VOLUME
VOLUME
-
to increase the sound
+
level,
or use
to decrease it on the remote control.
Sub woofer level
To activate surround mode
Adjustment
(SURR.)
to reinforce surround
effect.
SURROUND ON
XDSS
SURROUND OFF
(Extreme Dynamic Sound System)
Turn WOOFER LEVEL knob clockwise to increase the
Press XDSS to reinforce treble and bass.
sound level
lights up.
To cancel it press XDSS again.
The "XDSS OFF" indicator lights up.
the front
on
panel,
or
counterclockwise to
decrease it.
-
The "XDSS ON" indicator
-
MUTE
Press MUTE to turn off the sound, press
to
again
the
can
(Orientation
Acoustic
Optimizer)
ON/OFF
restore.
You
OAO
mute your unit in
order, for example, to
flashes in the
telephone,
display
answer
window.
Press OAO to reinforce the bass sound.
The "OAO ON"
or
"OAO OFF" indicator
lights.
To
can-
cel, press OAO again.
Sound
Quality Adjustment
DIMMER
?T o activate stereo sound
You
can
Select
a
choose between 4 fixed sound
desired sound mode
using
impressions.
the EQUALIZER
(EQ).
FLAT
:
Linear
ROCK
:
POP
:
More bass, more
Less bass, less treble
CLASSIC
:
For orchestral music
?Headphone
Connect
a
frequency
This function is darken the
display
window
by
half in
power-on status. Press DIMMER on the remote control.
To cancel it press the button again.
response
treble
Jack
stereo
headphone plug ( 3.5mm)
into the
headphone jack.
The speakers are automatically disconnected
you plug in the headphones (not supplied).
when
11
PREATION
Before
Setting
1
Operation
the Clock
Using Microphone (OPTIONAL)
You
Press CLOCK.
requires setting, press and
for more than 2 seconds.)
The hours display begins to blink.
(If
the clock
hold CLOCK
-
Select either the 12 hour
2. cycle by PRESET (-/+)
(12HR)
on
cycle
or
the 24 hour
the front
Use PRESET
4
(-/+)
microphone
to the MIC socket.
"ECHO-OFF" will be shown in the
Play
a
a
display
window.
music you want.
Sing along with the accompaniment.
Adjust the microphone volume by turning MIC
VOLUME KNOB.
cycle.
For your reference
You can record during
using microphone.
Refer to the "Recording" explanation section.
(See page 22.)
to set the current hour.
Use PRESET
(-/+)
When not
to set current minutes.
Press SET and the correct time is shown
on
display.
8
Press CLOCK at any time to show the time
the display, for about 5 seconds.
Sleep
To
sleep timer is set, the unit automatically
the specified time has elapsed.
the time
delay
the
on
turns
before the power is
In the
display window you can see SLEEP 180 for
about 5 seconds. This means that the system turns
automatically
after 180 minutes.
Each time you press SLEEP the setting changes
in the following order.
SLEEP 180 →150 → 120 →90→80→70 → 60→ 50 → 40 →
30 → 20 →10 → OFF→SLEEP 180...
To check the
remaining
time until the power is
turned off.
function is active press SLEEP
The time remaining until the unit turns off is
While the
sleep
briefly.
displayed
for about 5 seconds.
ote
If you press SLEEP while the
sleep
time is
displayed,
the SLEEP time is reset.
To cancel
Sleep
Timer
setting
If you wish to stop the function, press the SLEEP button
repeatedly until "SLEEP 10 appears, and then press
"
SLEEP
display
12
once
again
window.
after "SLEEP 10
To
Adjust ECHO
You
give an
microphones.
can
set the MIC volume
turn off the MIC and remove the
"
shows
on
the
Volume
echo effect to the sound from the
Press the ECHO
turned off, press SLEEP.
off
or
microphone,
microphone from the MIC socket.
If the microphone is set too near the speaker, a
howling sound may be produced. In this case, move
the microphone away from the speaker or decrease
the sound level by using the MIC volume control.
If sound through the microphone is extremely loud, it
Timer Function
specify
the
may be distorted. In this case, turn the MIC volume
control toward minimum.
When the
off after
using
knob to minimum
7
3
by connecting
otes
6.
2
source
Press SET.
5
1
1
3
Press SET to confirm the selected hour
3
Connect your
2
panel.
(24HR)
or
sing to a music
microphone to the unit.
can
repeatedly.
ECHO-OFF→ECHO-1 →ECHO- 2
Before
Operation
Timer Function
With the TIMER function you can have the radio reception and recording, CD or tape playing turned on and
7
off at the time desired.
1
8
Press CLOCK to check the current time.
If you don't set clock, timer function doesn't work.
Press TIMER to enter the timer
2 TUNER-CD-TAPE flash
in the
setting mode.
display window in
turn.
For your reference
If you want to correct the
previous
memorized TIMER
press and hold the TIMER button
seconds.
setting,
The
previous
""
3
4
memorized timer
indicators appear in the
setting
more
for
on
than 2
Time and
display.
Press SET when the desired function flashes.
1.
a.
When you select TUNER function,
'PLAY' and 'REC' indicator flash in
the
display
window
alternately
for
about 3 seconds.
'PLAY' indicator
:
TUNER
'REC' indicator
:
TUNER
play only
play and recording
memorized preset
number with PRESET (-/+) on the front panel
previous
and press SET.
'ON TIME' indicator appears for about 0.5
seconds in the display window and then
disappears.
2. When you select CD or TAPE function,
'ON TIME' indicator appears for about 0.5
seconds in the
display
5
6
on
PREATION
on
minutes time.
disappears
.
Set the turn off hour time
9 (-/+).
Press SET.
10
11
12
13
14
Set the turn off minutes
Press SET.
Adjust
(-/+).
the volume level
pressing PRESET
Press SET.
""
appear in the display window and the timer
setting has been completed.
Tu rn the
system off.
The selected timer functions
To cancel
the timer set
or
on
or
are
automatically
and off at the preset times.
check the timer
cancel. You
can
you can select
also check the timer
pressed
status.
To activate
button
pressing PRESET
(-/+).
15
setting
pressing PRESET
or
check the timer, press the TIMER
repeatedly
so
that
"
"
appears in the
display
window.
To cancel the TIMER, press the TIMER button
repeatedly
so
that
"
"
disappears
from the
display
window.
window and then
disappears.
Set the turn
pressing PRESET
Press SET to confirm the turn
Each time the TIMER button is
function flashes.
Select the
minutes time
(-/+).
switched
b. Press SET when the desired
c.
on
'OFF TIME' indicator appears for about 0.5
seconds in the display window and then
For your reference
-
Set the turn
ote
hour
pressing PRESET (-/+).
If the disc is inserted the
audio CD
Press SET to confirm the turn
on
hour time.
on
MP3 except
the unit, the timer function plays to the
DVD,VCD
or
TUNER.
13
Before
Mini
Glossary
Operation
for Audio Stream &
Surround mode
Sound Mode
You
DVD
VCD
CD
enjoy surround sound simply by selecting one
pre-programmed sound fields according to the
can
of the
program you want to listen to.
The
Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital
mark, you
program source. If you play DVDs with
can enjoy even better sound quality, greater spatial accuracy, and improved dynamic range.
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and double-D symbol are trademarks
of Dolby Laboratories.
"
"
When DVD is inserted
You
the
Digital
pressing the AUDIO
playback.
button
change
can
Audio
on
Output
mode
by
the remote control
during
Each time you press SOUND button, the "BYPASS"
indicator will only be shown on the display window.
When Video CD is inserted
BYPASS
Outputs
the sound from the front left and
and subwoofer.
right speakers
Each time you press SOUND button, the sound mode
of Video CD is changed on the display window as the
following
BYPASS
→
order.
→
STUDIO
CHURCH
→
→
CLUB
→
HALL
→
THEATER 1
BYPASS...
ote
After you select the "Bypass" of sound mode by
pressing SOUND button, press AUDIO button.
The Left,
displayed
Right
on
and Stereo of audio channel will be
the TV
screen.
When CD is inserted
Each time you press SOUND button, the sound mode
of Audio CD is changed on the display window as the
following
BYPASS
→
order.
→
CHURCH
STUDIO
→
→
CLUB
→
HALL
→
THEATER 1
BYPASS...
For your reference
?
The unit memorizes the last mode
each
?
settings
for
individually.
You can identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labelled with the
logo.
Dolby Surround encoded programs are labelled with
the
logo.
source
-
-
ote
When you
the output
quency).
14
play sound tracks with 96kHz sampling frequency,
signals will be converted to 48kHz (sampling fre-
Before
Operation
3
Caution:
the remote control, press the DVD/CD
button to select the device to be operated.
Before
using
General
This manual
or
(e.g.,
gives
2
setting
of
an
item.
be also be used for
number).
For
some
press SELECT/ENTER to execute the
basic instructions for
is not available
playback
on
Temporary
Title
A-B
functions,
setting.
Feedback Field Icons
Repeat
title
Repeat
sequence
Resume
Press
/
play
from this
point
the disc.
displayed on the TV
changed on the menu.
status can be
can
prohibited
or
not available
be
Notes
Some discs may not
provide all of the features on the
on-screen display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
display operation
Press DISPLAY
during playback.
to select an item.
The selected item will be
highlighted.
Example: On-Screen Display during playing
DVD
Selection Method
Items
Function / Action using
Title Number
Shows the current title number and total number of titles /
skips to the desired title number.
/
Numbers, or
SELECT/ENTER
Shows the current chapter number and total number of
chapters / skips to the desired chapter number.
/
Numbers, or
SELECT/ENTER
Chapter
1/3
Number
1/12
Time search
0:20:09
Audio language
and Digital Audio
Output
setting
Display
Some items
On-screen
1
title
can
the
Explanation
On-Screen
screen.
change
The number buttons
Action
General
to
or
numbers
operating the
unit. Some DVDs require specific operation or allow
only limited operation during playback.
When this occurs, the symbol
appears on the TV
screen, indicating that the operation is not permitted by
the unit
Press
Angle
to select item
Shows the elapsed playing time / searches by elapsed
time.
,
,
Numbers, SELECT/ENTER
Shows the current audio soundtrack language,
encoding method, and channel number / changes the
mode
Subtitle language
/
/or
AUDIO
setting.
ABC
1 ENG
1/3
Sound
Bypass
/or
Shows the current subtitle language / changes the set-
SUBTITLE
ting.
Shows the current angle number and total number of
angles / changes the angle.
/
Shows the current sound mode / changes the setting.
/or
SOUND
Example: On-Screen Display during playing VCD
Items
Function / Action using
Track Number
Shows the current track number, total number of tracks and
PBC On mode / skips to the desired track number.
1/3
Time
0:20:09
Audio Channel
/
to select item
Shows the elapsed playing time.
Shows the audio channel / changes the audio channel.
Selection Method
/
,
Numbers,
or
SELECT/ENTER
/
Numbers, or
SELECT/ENTER
,
/or
AUDIO
Sound
Bypass
Shows the current sound mode / changes the setting.
/or
SOUND
15
PREATION
Before
Initial
the
Setup
menu, you
ments to items such as
can
make various
and sound. You
picture
for the subtitles and the
set a
language
among other things.
To
LANGUAGE
Settings
By using
item,
Operation
see
For details
on
can
also
menu,
menu
OSD
English
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
and exit the Menu:
Press SETUP to
display
the
menu.
SETUP will take you back to initial
To go to the next level:
on
on
A second press of
screen.
Move
previous
level:
Select
a
language
for the
Setup
menu
1
Operation
The setup
2 press
The
audio),
menu
/
Use
screen
/
/
Some items
16
option
disc
then
display.
as
well
as
alternate
setting for
setting(s).
to select the second desired
the
option
to move to the third level.
to select the desired
require
Press SETUP
or
setting
then
to confirm your selection.
additional steps.
PLAY to exit the
setup
DVD
was
language
Refers to the
original language
(disc
in which the
recorded.
Other: To select another language, press number but-
will be shown the current
4 press SELECT/ENTER
5
on-screen
you prefer for the audio track
subtitles, and the disc menu.
Original:
to move to the second level.
then press
Use
appears.
to select the desired
selected item,
3
Select the
Press SETUP.
Use
and
the remote control.
Disc Audio / Subtitle / Menu
General
Select
OSD
the remote control.
To go back to the
Press
adjust-
pages 16 to 19.
display
Press
Setup
each Setup
LANGUAGE
menu.
tons to enter the
corresponding 4-digit number according to the language code list on page 32. If you enter
the wrong language code, press CLEAR on the remote
control.
Before
Operation
DISPLAY
Progressive Scan
DVD
DISPLAY
TV
16:9
Aspect
Display
Mode
Progressive
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On.
Widescreen
Scan
Off
To Turn ON
Move
TV
Aspect
a
16:9: Select when
Component Input.
1. Select
standard 4:3 TV is connected.
a
"Progressive Scan"
then press
16:9 wide TV is connected.
2. Select "On"
Mode
Display
Display
Mode
DVD
setting
works
only
when the TV
Aspect
menu
using
/
the
buttons.
DISPLAY
wide
the
upper and
Panscan:
Automatically displays
the wide
picture
and cuts off the
portions
that do not fit.
a
picture
with bands
Displays
lower portions
screen
the DISPLAY
.
TV
the entire
on
3. Press SELECT/ENTER to confirm your selection.
The confirm menu will appear.
mode is set to "4:3".
Letterbox:
scan:
Connect component out of the DVD to the input of your
monitor/television, set your television or monitor to
Select
DVD
4:3: Select when
progressive
of the
on
Display
On
Mode
Progressive
screen.
Off
Aspect
Scan
on
Prev.
Move
Select
4. When the confirm menu appears on your screen
Cancel is highlighted as default. Use the
buttons to highlight "ENTER".
5.
Pressing
scan
ENTER will set the
player
to
/
Progressive
mode.
Caution
Once the
setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to On in error, you must reset the unit.
1)
Remove any disc from the unit and close the disc
tray. See that "NO DISC" is displayed on the display
window
2)
Press and hold STOP (x) for five seconds then
release it. The video output will be restored to the
standard setting, and a picture will once again be
visible
on a
conventional
analog
TV
or
monitor.
17
PREATION
Before
Operation
AUDIO
OTHERS
Each DVD disc has
Set the
variety of audio output options.
player's AUDIO options according to the type
audio system you
a
OTHERS
of
use.
PBC
On
DivX(R) Registration
Select
AUDIO
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Sample Freq.
48 kHz
DRC
On
Vocal
On
PBC
Move
Dolby Digital
/ DTS / MPEG
Set
Select
DVD
Bitstream: Select "Bitstream" if you connect the DVD
Player's DIGITAL OUT jack to an amplifier or other
equipment
PCM
with
a
Dolby Digital
or
Select when connected to
:
Select
Move
MPEG decoder.
a
digiDolby Digital or
amplifier. DVDs encoded in
MPEG will be automatically downmixed
Playback Control (PBC)
to two-chan-
to On or Off.
On:Video CDs with PBC
are
played according
Off:Video CDs with PBC
are
played
the
same
to the PBC.
way
as
Audio CDs.
DivX(R) Registration
two-channel
tal stereo
VCD
You
can
DivX
show the DivX DRM
(Digital Right
code for your unit
Management) Registration
only.
nel PCM audio.
Your
Please
Sample Freq. (Frequency)
the
DVD
use
DivX(R)
this code to
made, this unit automatically converts any 96 kHz
signals to 48 kHz so your system can decode them.
Check the documentation for your
Video On Demand service.
amplifier
To learn
verify
more
its
Display
DVD
the number which you
?
With the DVD format, you can hear a program's sound
track in the most accurate and realistic presentation
digital
a
turn off your
Do you want to
technology. However,
dynamic range of the
?
This allows you to listen to a
lower volume without losing clarity of sound.
The rental has been
use one
Set Vocal to On
only
DVD is
The karaoke channels
mix into
18
playing.
a
when
a
of your 7 views
Display
now
expired.
This rental is
?
different
No
Set DRC to On for this effect.
Vocal
a
player.
Yes
quietest ones).
movie at
or
stop playback, play
the authorization
expired.
error.
multi-channel Karaoke
normal stereo sound.
on
the disc will
This video
player
is not authorized to
play this video.
options
watch the file.
can
This rental video has 7 views left. A view
video,
audio
you may wish to compress the
audio output (the difference between the loudest sounds
and the
go to www.divx.com/vod
If you rent the DivX VOD file, it has several
viewing limits as show below.
ends when you
thanks to
Video On Demand format.
an
Notes
?
Dynamic Range Control (DRC)
DivX(R)
encrypt movie file.
without any
to
the
purchase videos
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental
capabilities.
possible,
register this player with
The
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
signal through
using
XXXXXXXX
:
This will allow you to rent and
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. When this choice is
this unit passes each type of
further processing.
code is
registration
of
Before
LOCK
Operation
Password
(Parental Control)
You
LOCK
Rating
Unlock
Password
****
Code
Country
1
2
LK
can
control information
certain
scenes on
that may not be suitable
of these discs contain parental
scenes
Many
that applies
to the
.
3
highlighted.
Enter the new 4-digit code, then press
SELECT/ENTER. Input it again to verify.
4
Press SETUP to exit the
complete
the disc. Movies and
menu.
Select
DVD
for children to view.
change password.
Select Password on the LOCK menu then press
Follow step 2 as shown left (Rating). "Change" or
If you
Some movies contain
enter or
"New" is
Move
Rating
(Security Code)
disc
scenes are
or
to
rated
from 1 to 8, depending on the country. Some discs offer
more suitable scenes as an alternative.
forget your Security
Code
If you forget your security code you
the following steps:
1
Input
the
6-digit number
security code is
and the
2
Enter
a new
code
can
"210499"
on
clear it
using
the setup
menu
cleared.
described above.
as
ote
The
control feature allows you to block access
below the rating you input, thereby preventing
parental
to scenes
your children from being able to view material you
believe is unsuitable.
1
Select
"Rating"
the LOCK
on
menu
press STOP
setup
then press
"
appears on the TV screen,
and then press SETUP to move to the
INPUT PASSWD
(x)
menu.
Country
Code
DVD
.
Enter the code of the
To
access
the
Rating,
2 Code features, you
Password and
must
input
code you created.
If you have not yet entered a
prompted to do so.
the
Country
4-digit
security
Input
security
code you
are
4-digit code and press SELECT/ENTER.
it again and press SELECT/ENTER to verify.
make a mistake before pressing
a
Enter
If you
SELECT/ENTER, press CLEAR.
3
When
"
Select
a
rating
from 1 to 8
using
the
Rating 1-8: Rating
and rating eight (8)
one
(1)
used to rate the DVD video disc, based
in the reference chapter. (See page 33.)
were
1
has the most restrictions
is the least restrictive.
press
"Country Code"
on
the LOCK
the list
menu
then
.
2
3
Select the first character
using
Shift the
button and select the
as
cursor
shown left
using
4 second character using
5
Unlock
Select
on
Follow step 2
/
buttons.
whose standards
country/area
/
(Rating).
/
buttons.
buttons.
Press SELECT/ENTER to confirm your country
code selection.
If you select unlock, parental control is not active
and the disc plays in full.
ote
If you set a rating for the player, all disc scenes with
the same rating or lower are played. Higher rated
not
scenes are
available
on
played
unless
an
alternate
scene
is
the disc. The alternative must have the
rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc.
same
Press SELECT/ENTER to confirm your
4 selection, then press SETUP
rating
to exit the menu.
19
PREATION
Operation
with RADIO
Presetting
the radio stations
You
50 stations for FM and AM.
can
Before
preset
ume
sure
Press TUNER/BAND to show either FM or AM in
the display window.
Every time you press this button, AM and FM
1
2
3
otes
Tuning
Press the TUNING
Scanning stops
-
Manual
3
4
for
more
than 0.5 second.
when the unit tunes in
a
?F
station.
(-/+) briefly
and
remote
control)
repeatedly.
/
(-/+) (or PRESET
to select the
on
6
Repeat steps
the
preset number you
on
?
are
the front
panel
preset number will flash. To change
the preset number, follow the steps 4-5.
the remote
preset numbers
appears
20
or
PRESET
/
until the desired preset number
press the button repeatedly.
control)
effect, but
again
so
that "ST"
display window. There will
the reception will improve.
be
no
Press
to restore the stereo effect.
improve reception
Reposition the supplied
antennas.
Use MODE/RIF
(Radio
Interference
function to switch to Mono
by
reception
Filter)
if stereo recep-
noise.
weak AM broadcasts, if noises
occurs, press MODE/RIF once.
moment and then a
or
AUX).
To
While
For your reference
If all stations have already been entered, "MEM FULL"
message will appear in the display window for a
(-/+) (
in the
tion is distorted
cleared.
Press and hold PRESET
or
to select another
otes
for about two seconds, "CLEAR ALL" appears in the
display window and then press CLEAR on the front
the stations
or
?
stereo
2 to 5 to store other stations.
(TAPE, DVD/CD
For your reference
If a FM program is noisy
Press MODE/RIF repeatedly
MODE/RIF
Press and hold PROGRAM/MEMORY
To recall
function mode
again.
To clear all memorized stations
panel,
or
tuning, see "Manual Tuning".
automatic tuning, see "Automatic Tuning".
disappears
Press PROGRAM/MEMORY
The station is stored.
non-preset radio stations
Press POWER to turn off the unit
want.
5
Adjust the volume by rotating VOLUME knob (or
pressing VOLUME -/+ on the remote control)
repeatedly.
To turn the radio off
Press PROGRAM/MEMORY on the front panel.
A preset number will flash in the display window.
Press PRESET
remote
For manual
?
Tuning
Press the TUNING
/
on the
(-/+) (or PRESET
control) repeatedly to select the preset
Press PRESET
To listen to
(-/+)
FM in
the next preset station.
Press TUNING (-/+) on the front panel until the
frequency indication starts to change.
Automatic
or
station you want.
Each time you press this button, the unit tunes in
changes alternately.
2
to the radio
Press TUNER/BAND to select either AM
the display window.
The last received station is tuned in.
1
that you have turned the voldown to the minimum level.
tuning,
make
Listening
on
recording
with RADIO
Operation
RDS Function
-
Programme Search (PTY)
OPTIONAL
A
About RDS
equipped with RDS (Radio Data System),
which brings a wide range of information from FM radio.
RDS is a system for transmitting station call signs or
network information, a description of station programme
type text message about the station or specifics of musiThis unit is
benefit of RDS is its
ability to encode broadcasts with Programme Type (PTY) codes that indicate
the type of material being broadcast. The following list
major
shows the abbreviations used to indicate each PTY
along
with
an
explanation
of the PTY.
cal selection and the correct time.
RDS
Tuning
containg RDS data is tuned in, the
unit will automatically display the station's call sign and
the RDS indicator will light in the Display Window as
well as indicators for the programme type recognition
(PTY), Radio Text (RT), Clock Time (CT) and RDS services programme (PS) if transmitted by the station.
When
RDS
FM station
a
Display Options
The RDS system is capable of transmitting a wide variety of information in addition to the initial call sign that
appears when a station is first tuned. In normal RDS
operation the display will indicate the station name,
broadcast network
front
or
Pressing RDS on the
cycle through the various
call letters.
enables you to
data types in the sequence:
panel
FREQUENCY
(PS
PTY
RT
CT)
PTY
(Programme type recognition)- The programme type is shown on the display window.
RT (Radio text recognition)- The radio station's
name is displayed on the display window.
CT (Time controlled by the channel)- Enable the
unit to receive the actual time and show it
on
the dis-
play window.
PS (Programme Service name)- The programme
title is displayed on the display window.
You may search for a specific
by following these steps:
otes
Some RDS stations may not choose to include some
of these additional features. If the data required for
the selected mode is not
being transmitted, the
show a PTY NONE, RT NONE,
Display Window will
CT NONE, PS NONE
1
Programme Type (PTY)
Press TUNER/BAND to select FM mode.
2
Select a desired station by pressing
TUNING (-/+).
When the RDS transmission is received, the
display shows the program service name (PS) after
RDS indicator appears.
3
Press the RDS to select PTY mode.
4
To search for a different PTY, press the PRESET
(-/+) while the last PTY in use is still displayed to
scroll through the list of available PTY types.
5
When the PTY is selected, press the TUNING
(-/+) within 5 seconds.
The unit will go into an automatic search mode and
attempt to find the next station with acceptable
signal strength that matches the desired PTY type.
message.
21
OPERATION
with TAPE
Operation
Basic
Playback
Recording
Press TAPE to select tape function.
("NO TAPE appears in the display
1
"
cassette deck
to the
2
Open
3
4
Insert a cassette with the tape side to the
bottom and then close deck.
by pushing
PUSH EJECT position.
Press B (or b : optional)
remote control.
on
the front
Press the function
1
window.)
plays
2
You
can
panel
pressing
Pressing
Once
4
Press zREC/[]
control.
The recording is
by
To stop the
Press
After the cassette
This feature is
To
plays
side, stops automatically.
After the cassette of
plays
six times
repeatedly front and
stops automatically.
reverse
side,
the front
panel
or
z/[] remote
begun.
recording
zREC/[]) during recording
recording
.
STOP(x).
CD-
front and
on
To pause the
Press z/[] ( or
plays front or
reverse (backward play) side,
stops automatically.
reverse
Twice
recording direction : OPTIONAL
PLAY MODE repeatedly to set the recording
3
After the cassette
-
cas-
Press zREC/[] on the front panel or z/[] on the
remote control.
"REC" flashes and holds the cassette in pause
mode.
Function
Display
the cassette deck and insert a blank
sette into the cassette compartment.
direction.
or
OPTIONAL
select direction of the cassette you want
PLAY MODE.
AUX)
or
Open
Press
front side of cassette, the unit
:
(CD, TUNER/BAND
To set the
stops automatically.
AUTO REVERSE DECK
Auxiliary source
or
you want.
AUTO STOP DECK
After auto stop deck
from Radio, CD
Synchro recording
a
convenient to record tracks from CD to
cassette.
Select the CD function and load a CD to be
recorded.
You may wish to program a selection of tracks for
1
recording.
2
Stop Play
the cassette deck and insert
cassette into the tape tray.
Open
blank
To set the
STOP(x)/CLEAR on the front panel or TAPE
STOP (x) on the remote control during playback.
Press
Press
recording direction
PLAY MODE repeatedly to
a
set the
recording
direction.
Tape Counter Reset
Press COUNTER RESET
playback.
Playing time
To
(COUNT.RESET) during
appears "TAPE 0000
Play Rewind
or
"
in
display
window.
Fast Forward
After press . bb/BB > on the front panel or
bb/BB on the remote control during playback or
stop, press
want.
22
B
(or
b
:optional)
at the
tape position you
3
Press CD SYNC. in stop mode.
"REC" flashes and
displays in the
display window.
4
The
"
synchronized recording
cally after about 7 seconds.
"
is started automati-
otes
If you wish to record from the desired track, select
the desired track with ./> before
commencing CD synchro recording.
A function change is not possible during
recording.
Operation
Playing
a
DVD and Video CD
Playback Setup
Turn
on
with DVD and Video CD
DVD
General Features
ote
VCD
the TV and select the video
input
Unless stated otherwise, all operations described
the remote control. Some features may also be
source
connected to the unit.
available
Audio system: Turn on the audio system and select
the input source connected to the unit.
Press OPEN/CLOSE
1
(Z)
to open the disc
Moving
tray.
When
2
3
Press OPEN/CLOSE (Z) to close the tray.
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
menu.
to another TITLE
disc has
a
then the
more
than
one
If
The
a menu screen
or
is
loading
a
DVD
/
//
buttons to select the
you want to view, then press SELECT/
ENTER to start. Press TITLE or MENU to return to
title/chapter
the
menu screen.
VCD
Use the number buttons to select the track you want
to view and press RETURN to return to the menu
screen.
Menu
settings
and
operating procedures
may differ. Follow the instructions on the each menu
screen. You also may set PBC to Off (See "PBC" on
page
play any
stopped.
can
back is
Moving
When
displayed
may be displayed first after
Video CD which offer a menu.
Use the
You
DVD
menu screen
DVD
appropriate
18).
title, you
(0-9)
to
can move
is
playback
/
or use
stopped
to move
the
by inputting
its number while
play-
VCD
a
disc has
title
on a
more
disc has
than
chapter/track
as
Press .
or
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
>
briefly during playback to select
the next chapter/track or to return to the beginning of
the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
/
to select the chappress DISPLAY and press
ter/track icon. Then, input the chapter/track number or
use/.
Search
DVD
1 Press m
or BB
The
Notes
title
to another CHAPTER/TRACK
player
2 Press m
parental control is set and the disc is not within
rating settings you must input the password.
(See "Lock Menu" on page 19.)
number
DVD
to another title.
instead.
If
Setup
another title. Press DISPLAY while
Load your chosen disc in the tray, with the
playback side facing down.
--
the
on
use
will
now
or BB
VCD
during playback.
go into SEARCH mode.
repeatedly
to select the
required
speed: mX2, mX4, mX8, mX16, mX100
(backward) or MX2, MX4, MX8, MX16,
MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8, mX16 (backward) or MX2, MX4,
MX8, MX16 (forward).
3 To exit SEARCH mode, press PLAY.
23
OPERATION
Operation
General Features
Still Picture and
DVD
Repeat
(continued)
To repeat
Frame-by-frame playback
VCD
playback.
The player
on
the remote control
will
now
Slow Motion
or
by
3
the remote
on
T
DVD
VCD
t 1/16
display
required speed: t 1/2,
[(backward) DVD only] or
Slow motion
playback
in
reverse
is not
applicable
for
Video CD.
can
DVD
play
a
Press REPEAT
VCD
title/chapter/all/track
during playback
onds from left to
on a
disc.
Playback
-
Repeat Track/All/Off
playback
will continue from the current
point.
repeats the current track
repeats all the tracks on a disc.
player
Memory
memorizes last
scene
from the last disc that
remains in memory even if
the disc from the player or switch off the
is viewed. The last
remove
DVD
scene
If you load a disc that has the
the scene is automatically recalled.
player.
scene
memorized,
:
does not
play repeatedly.
ote
--OnaVideoCDwithPBC,youmustsetPBCtoOffon
the setup menu to use the repeat function (See "PBC"
on page 18).
24
starts from the selected time on the disc. If you enter
to select a desired
you
:
seconds, press SELECT/ENTER to confirm
invalid time,
an
Title: repeats the current title.
Off : does not play repeatedly.
-
in the box.
right
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
This
Off
elapsed playing time of the
2 Within 10 seconds, press
/
to select the Time
Search icon in the on-screen display.
Repeat Chapter/Title/Off
Chapter: repeats the current chapter.
Video CDs
?
screen.
current disc.
Last Scene
DVD Video Discs
:
on-screen
the start time.
repeat mode.
All
the
The Time Search box shows the
4 Within 10
Repeat
?
on
appears
The
3 Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and sec-
ote
Track
during playback.
at
playing
The "-:--:--" appears in the Time Search box.
3 To return to normal PLAY, press PLAY.
?
VCD
-
(forward).
?
DVD
1 Press DISPLAY
during playback.
or
To cancel the sequence, press REPEAT A-B.
The Time Search function allows you to start
any chosen time on the disc.
T1/2,T1/4,T1/8orT1/16
?
point.
"
Time Search
T to select the
or
t 1/4, t 1/8
?
title:
con-
will enter SLOW mode.
2 Use the t
You
a
again at your chosen end point.
"A B" appears briefly on the TV screen, and the
repeat sequence begins.
3 To exit still motion mode, press PLAY.
player
sequence in
2 Press REPEAT A-B
during
trol.
The
VCD
-
pressing PAUSE/STEP repeatedly
1 Press t
a
DVD
-
go into PAUSE mode.
advance the picture frame-by-frame
can
A-B
1 Press REPEAT A-B at your chosen starting
A
appears briefly on the TV screen.
"
1 Press PAUSE/STEP
2 You
with DVD and Video CD
ote
This
player
does not memorize the
you switch off the
disc.
player
before
scene
of
commencing
a
disc if
to
play
the
Operation
General Features
Zoom
DVD
with DVD and Video CD
(continued)
discs: Menus
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
during playback
or
still
playback
to acti-
vate the Zoom function.
If you press ZOOM repeatedly, the
increases up to four steps.
100% size
(screen
size→ 1600% size
/
2Usethe
zoomed
fit
mode)
→
400% size
100% size
→
fit
(screen
//b u ttons to
→
800%
appropriate
the
picture.
1 Press TITLE.
function may not work for
DVDs.
some
2 The
menu can
and subtitle
DVD
3 To
VCD
You can start playback from a memorized
nine points can be memorized.
To enter a mark, follow these steps.
1
point. Up
to
a
menu, the menu will appear on the
Otherwise, the disc
screen.
Marker Search
option.
DVD
Title Menu
ote
zoom
an
/
//
buttons to highlight your
Or, use the
selection, then press SELECT/ENTER.
If the current title has
The
number button to select
mode)
through
move
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
press the
level
magnification
DVD
the contents of DVD Video
Checking
VCD
1 Press ZOOM
DVD Features
Special
remove
list
menu
may appear.
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
again.
DVD
Disc Menu
Press MENU.
During disc playback, press MARKER when
playback reaches the spot that you want to
The disc
menu
is
displayed.
memorize.
The Marker icon will appear
2
on
the TV
1 to enter up to nine Marker
Repeat step
Camera
briefly.
screen
points
on a
disc.
To Recall
1
a
playback,
The MARKER SEARCH
scenes
will appear
recorded at different
to a different camera
/
1 Press DISPLAY and then press the
press SEARCH.
menu
If the disc contains
angles, you can change
during playback.
Marked Scene
disc
During
Angle
DVD
a
on
2 Within 10 seconds, press
/
to select
number that you want to recall.
the
a
screen.
angle
to select
angle.
The number of the current
window.
Marker
camera
2 Select
desired
a
angle appears
angle pressing
the
on
the
/
display
buttons.
3 Press SELECT/ENTER.
will start from the Marked
Playback
Changing
scene.
4 To remove the MARKER SEARCH menu, press
SEARCH.
1
a
During
Press
disc
playback,
/
Changing
press SEARCH.
menu
will appear
on
the
screen.
to select the Marker number that you
Press CLEAR.
The Marker number will be erased from the list.
4
Repeat steps
2 and 3 to erase additional Marker
numbers.
5
to hear a
the Audio Channel
VCD
Press AUDIO
different
want to erase.
3
repeatedly during playback
audio language or audio track.
DVD
Marked Scene
The MARKER SEARCH
2
Language
Press AUDIO
different
To clear
the Audio
repeatedly during playback to hear
audio channel (Left, Right or Stereo).
Subtitle
a
DVD
Press SUBTITLE
to see the
(S-TITLE) repeatedly during playback
different subtitle languages.
To remove the MARKER SEARCH menu, press
SEARCH.
ote
If
appears, the feature is not available
on
the disc.
25
OPERATION
Operation
Playing
Disc
an
with Audio CD and MP3/WMA Disc
Audio CD and MP3/WMA
CD
MP3
MP3 / WMA disc
limited
WMA
compatibility
can
MP3/WMA formatted
play
CD-ROM, CD-R,
recordings
on
CD-RW discs.
or
player
is
follows:
as
within 32
48 kHz (MP3),
Sampling frequency:
within 24 48kHz (WMA)
Bit rate: within 32 320kbps (MP3),
40
192kbps (WMA)
?T he player cannot read an MP3/WMA file that has a
file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which cre?
The unit
with this
-
-
?
-
-
Audio CD
Once you insert
an
audio CD
a menu
appears
on
the
?
TV
/
to select a track then press
PLAY or SELECT/ENTER and playback starts.
screen.
Press
0:00:00
1/12
Audio CD
List
Program
?
Track1
ates an ISO 9660 file
Track2
Track3
?
Track4
File
names
should have
Track5
Track6
Track7
?
Track8
system.
must
incorporate
They
should not
a
maximum of 8 letters and
.mp3 or .wma extension.
contain special letters such as
an
/ ?
*:"<>letc.
?
/
Press
to select a
SELECT/ENTER to
2.
see
This DVD
folder, and press
the disc should be less
to select a track then press PLAY or
SELECT/ENTER. Playback starts.
0:00:00
1/104
MP3 / WMA
List
player requires
discs and
recordings
to
meet certain technical standards in order to achieve
the folder contents.
/
Press
on
than 999.
MP3 / WMA
1.
The total number of files
Program
1-Music1
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many
different types of recordable disc formats (including
CD-R containing MP3 or WMA files) and these require
certain pre-existing conditions (see above) to ensure
compatible playback.
2-Music2
3-Music3
Customers should note that
4-Music4
5-Music5
required
6-Music6
7-Music7
otes
If you
are
in
a
file list
on
to return to the Folder
on
?
?
On
the MP3/WMA
list,
use
the
menu
/
to
and want
highlight
the stop mode and press SELECT/ENTER.
Press MENU to
move
to the next page.
CD with MP3/WMA file and JPEG file, you can
switch MP3/WMA and JPEG menu. Press TITLE and
a
MP3/WMA
or
lighted. Then,
JPEG word
use
/
on
top of the
menu
is
high-
to select MP3/WMA or JPEG
then press SELECT/ENTER.
26
is
in order to download MP3 / WMA files
and music from the Internet. Our company has no
right to grant such permission. Permission should
always
?
permission
be
sought
from the
copyright
owner.
with Audio CD and MP3/WMA Disc
Operation
Pause
CD
MP3
1 Press PAUSE/STEP
2 To return to
press PLAY
or
>
In
press
CD
MP3
WMA
player
to
briefly
CD
or BB
will
now
or BB
MP3
WMA
during playback.
go into SEARCH mode.
repeatedly
to select the
speed: mX2, mX4, mX8 (backward)
MX4, MX8 (forward).
Search speed and direction
briefly during
playback to go to the next track
beginning of the current track.
Press . twice
track.
or
The
2 Press bb
to another Track
Press .
1 Press bb
during playback.
playback,
PAUSE/STEP again.
Moving
Search
WMA
are
indicated
on
required
or
the
MX2,
menu
screen.
or
to return to the
3 To return to
step back
to the
playback,
press PLAY.
previous
of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
case
during playback.
Repeat
1 To
Track/All/Off
CD
MP3
WMA
repeat the track currently playing, press REPEAT.
The
Repeat icon and "TRACK" appears
on
the
menu
screen.
2 To
repeat all tracks
on a
disc, press REPEAT
a
second time.
The
Repeat icon and
3 To cancel
The
"ALL" appears
Repeat mode,
on
the
menu screen.
press REPEAT
Repeat icon and "OFF" appears
on
the
a
third time.
menu screen.
27
OPERATION
Operation
Viewing
This unit
JPEG disc
a
play
JPEG recordings,
on right.
can
Insert
with JPEG Disc
Slide Show
JPEG
/
//
discs with JPEG files. Before
Use
read the notes
then press SELECT/ENTER.
on
playing
JPEG Recordings
disc and close the tray.
The JPEG menu appears on the TV
Moving
a
screen.
to
highlight
the
(Slide Show)
to another File
Press .
or
>
during viewing a picture
or to the previous file.
once
advance to the next file
to
JPEG
Still Picture
Preview
List
JPEG Folder 1
1 Press PAUSE/STEP
JPEG Folder 2
JPEG Folder 3
JPEG Folder 4
JPEG Folder 6
JPEG Folder 7
JPEG Folder 8
/
to select a
2 SELECT/ENTER.
folder, and press
A list of files in the folder
?
Tip
list,
are
use
"
"
the
a
file list and want to return to the Folder
/
buttons
on
the remote to
highlight
a
particular file, press
file and press
PLAY.
?
?
?
There
to the next page.
four Slide
SELECT/ENTER.
?
If you set
active.
28
display
Speed option
to
Off, Slide Show is
The total number of files and folders
not
on
the disc
Some discs may be incompatible due to
recording format or the condition of disc.
a
different
Ensure that all the selected files have the
copying
into the
".jpg"
CD layout.
If the files have
rename
:
Speed options:
> (Slow), >> (Normal), >>> (Fast) and II (off).
/
//
Use
to highlight the Speed. Then, use
/
to select the option you want to use then press
are
upon the size and number of JPEG
files, it could take a long time for the DVD player to
read the disc's contents. If you don't see an on-
Depending
extensions when
?
?
is limited
player
should be less than 999.
a
Tip
move
with this
---
?
Press MENU to
compatibility
burn another disc.
SELECT/ENTER or
Slide Show starts from the selected file if Speed
option is not Off.
While viewing a file, you can press STOP(x) to
move to the previous menu (JPEG menu).
?
now
after several minutes, some of the
files may be too large
reduce the resolution of
the JPEG files to less than 2760 x 2048 pixels and
menu screen.
If you want to view
/
to highlight
will
follows:
screen
and press SELECT/ENTER to return to the
previous
3
in
player
JPEG disc
as
appears.
If you
slide show.
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
The
JPEG Folder 5
Press
during
them
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
".jpg" extension will not be able
to be read by this DVD player. Even though the
files are shown as JPEG image files in Windows
Explorer.
File
names
without
Programmed Playback
CD
The
Program function enables you to store your favorite tracks
Aprogram can contain 300 tracks (Audio CD/MP3/WMA).
Insert
1
disc.
a
0:00:00
MP3/WMA
or
menu
1/12
from any disc in the
You
appears
Audio CD
as
List
Program
?
Music8
Track1
Track8
Track2
Track3
Music1
Music16
Track3
Track12
Music2
Music5
Track4
Track7
Music3
Music9
Track5
Track6
Music4
Music1
Track6
Track9
Music5
Music7
Track7
Track1
Music6
Music6
Track8
Track10
Music7
Music3
Audio CD Menu
play
a
?
?
MP3/WMA Menu
2
3
a
track
playing
a
on a
disc.
disc. The repeat icon
Off(No display):
Erasing
a
1 Use
/
does not
Track from
//
a
Program
Program
Program
Or, select
list.
List
to select the track that you wish
"
Press SELECT/ENTER to
the
play repeatedly.
Repeat
list.
(Delete) icon then
place the selected track
on
to erase additional tracks on
the list.
Press PROGRAM.
"
Or, select
(Add)" icon
then SELECT/ENTER to place the selected track
on the Program list. Repeat to place additional
tracks
on
the list.
Erasing
Select
You
can
add all tracks in the disc. Select
"
Select the track you want to start
Program list.
(Add
playing
on
Complete Program
"
List
The
ote
The programs
icon then press SELECT/ENTER.
All)l"
the
(Del all)", then press SELECT/ENTER.
complete Program for the disc is erased.
ote
4
Tracks
desired repeat mode.
Track: repeats the current track
All: repeats all the tracks on a disc.
to erase from the
the List.
on
memory.
title/chapter/all/track
2 Press CLEAR.
Select
player
appears.
2 Press REPEAT to select
MP3 / WMA
Program
can
1 Press REPEAT when
below.
1/104
0:00:00
List
WMA
Repeat Programmed
Audio CD and MP3/WMA Discs:
Audio CD
MP3
the
To
resume
Select
also cleared when the disc is removed.
are
normal
playback
from
programmed playback
the List then press SELECT/ENTER.
"PROG." disappears from the display window.
a
track
on
Tip
Press MENU to
move
Press PLAY
or
to the next page.
SELECT/ENTER to start.
5 Playback begins
in the order in which you prothe tracks and "PROG." appears on the
grammed
display window. Playback stops after all of the
tracks on the Program list have played once.
29
OPERATION
Operation
The unit
with DivX Disc
play the MPEG4 encoded files (.avi, mpg,
etc) and subtitle files (.srt, .smi, sub).
can
.mpeg, .divx
DivX disc
1
menu
appears
on
the TV
720x576
screen.
?
The file
(W
x
is limited
name
H) pixel.
of the DivX subtitle is available
20-40 characters
1/12
0:00:00
player
?A vailable resolution size of the DivX file is under
tray.
The DivX
with this
follows:
as
Insert the MPEG4 encoded disc and close the
compatibility
DIVX
List
?
file, it
Movie Folder 3
from
If there is
Movie Folder 1
Movie Folder 2
(differs
impossible code to
may be displayed as
"
by
language).
express in the DivX
mark on the dis"
_
play.
Movie Folder 4
Movie Folder 5
?
Movie Folder 6
Movie Folder 7
Movie Folder 8
?
If the number of the screen frame is over 30 per
1 second, this unit may not operate normally.
If the video and audio structure of recorded file
is not interleaved, either video
/
Press
to select a
2 SELECT/ENTER
/
3
or
folder, and press
?
to see the folder contents.
to select a track then press PLAY
If the file is recorded with
starts.
Press PAUSE/STEP
2.
To return to
You
can
during playback.
playback,
press PLAY.
Track/All/Off
play
a
Playable
playing
a
on a
Playable
disc.
z ".avi ",
disc. The repeat icon
appears.
2 Press REPEAT to select
?
?
(No display):
Subtitle
a
does not
play repeatedly.
Playable
-
within 24
(S-TITLE) repeatedly during playback
different subtitle language.
DivX
1 Press bb
or BB
2 Press bb
or BB
Bit
?
during playback.
repeatedly to select
the
required
?
?
DivX
?
30
during playback.
playback
status can be
displayed
the TV
-
-
-
Be
sure
to select "SUBTITLE ON" mode before
a
DivX file
by pressing SELECT/ENTER
every time.
When the subtitle has has
more
than two
languages
in the file, original subtitle is only available.
Subtitle in Chinese will not be displayed during
DivX file.
on
48kHz
(WMA)
rate: within 32 320kbps (MP3),
192kbps (WMA)
playback
3 To exit SEARCH mode, press PLAY.
Press DISPLAY
(MP3),
otes
speed.
screen.
Audio format
?
Search
General
format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
Sampling frequency: within 32 48 kHz
DivX
40
Display
".mpg ", ".mpeg
"
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ", "MP42 ".
Press SUBTITLE
to see the
DivX file
Playable Codec
desired repeat mode.
Track: repeats the current track
All: repeats all the tracks on a disc.
Off
DivX subtitle file
z ".srt ", ".smi ", ".sub ".
DivX
title/chapter/all/track
1 Press REPEAT when
?
1-point
MPEG4 encoders, like DivX or Xvid, have this option.
There are different levels of GMC encoding, usually called
1-point, 2-point, or 3-point GMC.
1.
Repeat
of
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
DivX
Pause
some
unit supof the record level.
GMC, the
GMC?
*
SELECT/ENTER.
Playback
audio is out-
putted.
ports
Press
or
(Subtitle
in
English
is
available.)
play
a
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
problem
before
contacting
service.
Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
The power is on, but the
unit does not work.
?
No disc is inserted.
?
No
?
picture.
The TV is not set to receive DVD
signal
out-
?
put.
?
The video cable is not connected
securely.
?
Plug the power cord into the wall outlet
securely.
Insert a disc. (Check that the DVD or, audio
CD indicator in the DVD display is lit.)
Select the appropriate video input mode on
the TV so the picture from the unit appears
on the TV screen.
Connect the video cable into the jacks
securely.
?T he connected TV power is turned off.
There is no sound or only
a very low-level sound is
heard.
?
?
The equipment connected with the audio
cable is not set to receive DVD signal output.
The audio cables
not connected
are
securely
?T
?
?
The
playback picture
is poor.
The unit does not start
The power of the equipment connected with
the audio cable is turned off.
?
The audio
?
The disc is
?
connecting cord is damaged.
?
Replace
it with
new one.
Clean the disc.
No disc is inserted.
?
Insert a disc. (Check that the DVD, or audio
CD indicator in the DVD display is lit.)
An
?
Insert a playable disc. (Check the disc type,
color system and Regional code.)
unplayable
The disc is
The disc is
?Amenu
is
disc is inserted.
placed upside
?T he disc is not
?
so
Connect the audio cable into the jacks
?
playback.
?
Select the correct input mode of the audio
you can listen to the sound from the unit.
?T urn on the equipment connected with the
audio cable.
?
dirty.
the TV.
securely.
.
?
urn on
within the
placed
guide.
?
?
dirty.
on
the TV
Place the disc with the
?
down.
Place the disc on the disc tray
inside the guide.
correctly
Clean the disc.
Press the SET-UP button to turn off the
?
screen.
playback side down.
menu
screen.
Severe hum
heard.
or
noise is
?
The
?
The
?
The disc is
?
?
Rating level is
plugs
and
?
set.
jacks
are
Cancel the Rating function
ing level.
?W ipe them with
with alcohol.
dirty.
?
dirty.
The speakers and components
connected poorly.
?
are
a
cloth
or
change the
rat-
slightly moistened
Clean the disc.
Connect the speakers and components
securely.
The unit is located with too close to the TV.
?
Move your TV away from the audio components.
Radio stations cannot be
tuned in.
?
The antenna is
positioned
or
connected
poorly.
?
?
Connect the antenna securely.
Adjust the
antennas and connect an external
antenna if necessary.
?
?
The signal strength of the stations is too
weak (when tuning in with automatic tuning).
No stations have been preset or preset stations have been cleared (when tuning by
?T
?
une
in the station
manually.
Preset the stations.
scanning preset stations).
The remote control does
not work
properly.
?T he remote control is not pointed at the
remote sensor of the unit.
?
?
?
?P oint the remote control at the remote
of the unit.
the remote control within about 23 ft
The remote control is too far from the unit.
?
Operate
(7 m).
There is an obstacle in the path of the
remote control and the unit.
?
Remove the obstacle.
The batteries in the remote control
exhausted.
?
Replace the batteries
are
sensor
with
new ones.
31
REF NC
Language
Enter the
appropriate
(See page 16).
Code List
code number for the initial
settings
"Disc Audio", "Disc Subtitle" and/or "Disc Menu"
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
32
Country
Enter the
appropriate
Code List
code number for the initial
setting "Country Code" (See
page
19).
Code
Country
Code
Country
Code
Country
Code
Country
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Seychelles
AE
United Arab Emirates
ES
LI
Liechtenstein
SD
Sudan
AF
Afghanistan
ET
Spain
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
FI
Finland
LR
Liberia
SG
Singapore
AI
Antigua and Barbuda
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
Georgia
MK
Macedonia
ST
Saint Tome and
AZ
GF
French
ML
Mali
SU
Former USSR
BA
Azerbaidjan
Bosnia-Herzegovina
GH
Ghana
MM
Myanmar
SV
El Salvador
BB
Barbados
GI
Gibraltar
MN
Mongolia
SY
Syria
BD
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Bangladesh
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
Guadeloupe (French)
MR
Mauritania
TF
French Southern
BH
Bahrain
GQ
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
Malaysia
TN
Tunisia
BS
Bahamas
GY
MZ
Mozambique
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
BZ
Belize
HR
Croatia
NG
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nigeria
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
ID
Indonesia
NO
IE
Ireland
NP
Norway
Nepal
UG
CG
(Keeling) Islands
Central African Republic
Congo
UK
Uganda
United Kingdom
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
CI
Ivory Coast
IN
India
NU
Niue
CK
Cook Islands
IO
British Indian Ocean
NZ
New Zealand
US
United States
CL
Chile
OM
Oman
UY
Uruguay
CM
Cameroon
IQ
Territory
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
Polynesia (French)
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
CS
Former Czechoslovakia
JM
Jamaica
PH
Papua New Guinea
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape Verde
JP
PL
Poland
VI
CX
Christmas Island
KE
Japan
Kenya
Virgin Islands (British)
Virgin Islands (USA)
PM
Saint Pierre and
VN
Vietnam
CY
Cyprus
KG
Kyrgyzstan
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
DE
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
Mayotte
DM
Dominica
KP
North Korea
QA
Qatar
YU
Yugoslavia
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman Islands
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
CF
Republic
Republic
(European
Guyana
Georgia
& S. Sandwich
(USA)
Anguilla
Mayen
Islands
Republic
Principe
Territories
(French)
Tobago
Outlying
Islands
Miquelon
(French)
City State
Grenadines
33
REF NC
Specifications
General Section
Power
Power
Refer to the main label.
supply
consumption
140W
Mass
7.6kg
External dimensions
Tuner/Amplifier
FM
AM
(W
x
H
x
D)
170
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
100
Power
300
mm
108.0 MHz
-
or
65 -74 MHz, 87.5 -108.0 MHz
10.7 MHz
60/55 dB
60
-
(Mono/Stereo)
10000 Hz
522-1611kHzor530-1610kHzor530-1720kHz
450 kHz
35 dB
2000 Hz
-
Speaker:30W+30W(6Ω/2chTHD10%)
Subwoofer: 60W (6Ω, THD 10 %)
T.H.D
0.15%
Frequency Response
Signal-to-noise ratio
40
Cassette tape
DVD/VCD/CD
x
Section
87.5
Output
340
x
-
20000 Hz
80 dB
player/DVD/VCD/CD player
Section
player
18000 Hz
Frequency response (audio)
Signal-to-noise ratio (audio)
Signal-to-noise ratio (video)
Dynamic range (audio)
40
Video output
(p-p), 75 Ω
(Y) 1.0 V (p-p), 75 Ω
(C) 0.3 V (p-p), 75 Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Video output
Cassette tape
More than 70 dB
More than 60 dB
More than 70 dB
player
Tape Speed
3kHz±3%
Wow Flutter
0.25%
(MTT -111, JIS-WTD)
120sec (C-60)
F.F/REW. Time
125
Frequency Response
Signal to Noise Ratio
Channel Separation
8000Hz
Section
Speaker Name
Type
Impedance
Frequency Response
2
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
80
-
H
x
D)
Subwoofer
1
Way
1
Speaker
6Ω
20000 Hz
85 dB/W
Rated
x
Speaker (L/R)
Way 2 Speaker
6Ω
Sound Pressure Level
34
-
43dB(P/B)/43dB(R/B)
50dB(P/B)/45dB(R/P)
55dB (MTT-5511)
Erase Ratio
Speaker
(1 kHz)
(1 kHz)
1.0 V
S-video output
Component
-
(1m)
55-1500Hz
82 dB/W
30W
60W
60W
120 W
200X340X208mm
2.9
kg
(1m)
170X335X263mm
3.3
kg
x
1
P/NO
:
3834RH0078N
Download PDF