advertisement
▼
Scroll to page 2
of 38
OWNER’S MANUAL MINI HI-FI AUDIO Please read this manual carefully before operating your set and retain it for future reference. MODEL OM4560 *MFL69304471* www.lg.com Copyright © 2017 LG Electronics. All Rights Reserved 2 Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due to electrical shock. CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to. Getting Started CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible. This device is equipped with a portable battery or accumulator. Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, fire or the like. CAUTION: No naked flame sources, such as lighted candles, should be placed on the apparatus. 1 Getting Started That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. 3 6 Table of Contents Table of Contents 1 Getting Started 2 Safety Information 8 Unique Features 8Accessories 9 Playable file Requirement 9 – Music file requirement 9 – Compatible USB Devices 9 – USB device requirement 10 Remote control 12 Front panel 13 Rear panel 2Connecting 14 14 14 15 15 Optional Equipment Connection – AUX IN Connection – AUX OUT Connection – USB Connection – Antenna Connection 3Operating 16 16 16 17 17 18 18 18 19 20 20 21 22 22 22 22 22 23 23 24 24 26 Basic Operations – CD/USB Operations – Auto Play – Selecting a folder and an MP3/WMA file – Deleting an MP3/WMA file Playback Effect – AUTO DJ Using BLUETOOTH® wireless technology – Listening to music stored on the BLUETOOTH devices Using the Music Flow Bluetooth App – Install “Music Flow Bluetooth” App onto Your Bluetooth Device – Activate Bluetooth with “Music Flow Bluetooth” App Radio Operations – Listening to the radio – Presetting the Radio Stations – Deleting all the saved stations – Seeing information about a Radio station Sound adjustment – Setting the sound mode Advanced Operations – Recording to USB – Programmed Playback Table of Contents 4Troubleshooting 27 27 27 Other Operations – Turn off the sound temporarily – Displaying file information (ID3 TAG) 27 – DEMO 27 – Using Microphone 27 – VOICE CANCELLER 28 – KEY CHANGER 28 – LIGHTING 28 Setting the Clock 28 – Setting the Clock through “Music Flow Bluetooth” App 29 – Using your player as an alarm clock 29 – Sleep Timer Setting 29 – Dimmer 30 Auto power down 30 – AUTO POWER On 31 – Auto function change 31 LG Sound Sync 32 WIRELESS PARTY LINK Connection 7 1 34Troubleshooting 5Appendix 35Maintenance 35 – Notes on Discs 35 – Handling the Unit 36 General specifications 37 Trademarks and Licenses 2 3 4 5 8 Getting Started Unique Features 1 BLUETOOTH® Accessories Please check and identify the supplied accessories. Getting Started Listens to music stored on your Bluetooth device. AUTO DJ Blends the end of one song into the beginning of another for seamless playback. Remote Control (1) USB Direct Recording Records music to your USB device. Music Flow Bluetooth Music Flow Bluetooth is an App designed to let you take control of some of LG’s latest Audio devices. Refer to page 20. LG Sound Sync Controls volume level of this unit by the remote control of your LG TV that is compatible with LG Sound Sync. FM Antenna (1) Batteries (2) Getting Started 9 Compatible USB Devices Music file requirement yy The USB function of this unit does not support all USB devices. MP3/WMA file compatibility with this unit is limited as follows. yy Sampling frequency : within 32 to 48 kHz (MP3), within 32 to 48 kHz (WMA) yy Bit rate : within 32 to 320 kbps (MP3), 40 to 192 kbps (WMA) yy MP3 Player : Flash type MP3 player. yy USB Flash Drive : Devices that support USB2.0 or USB1.1. USB device requirement yy Devices which require additional program installation when you have connected it to a computer, are not supported. yy Maximum files : Data CD : 999 / USB : 2000 yy Maximum folders : Data CD : 99 / USB : 200 yy Do not extract the USB device while in operation. yy For a large capacity USB, it may take longer than a few minute to be searched. yy File extensions : “.mp3”/ “.wma” yy Certain MP3/WMA files may not be played depending on the type or format of the file. yy To prevent data loss, back up all data. yy If you use a USB extension cable or USB hub, the USB device is not recognized. yy CD-ROM file format : ISO 9660/ JOLIET yy We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system. yy Using NTFS file system is not supported. (Only FAT(16/ 32) file system is supported.) The DTS is not supported. In case of DTS audio format, audio is not output. You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players. (Mastered/Live File System : Disc format system for Windows Vista) yy This unit recognizes up to 2000 files. yy External HDD, Card readers, Locked devices, or hard type USB devices are not supported. yy USB port of the unit cannot be connected to PC. The unit cannot be used as a storage device. yy Some USB may not work with this unit. 1 Getting Started Playable file Requirement 10 Getting Started Remote control • • • • • • • • • • • • • • a• • • • • • • • • • • • • • 1 (Power) : Switches the unit ON or OFF. B (Open/Close) : Opens and closes the disc tray. VOL +/- : Adjusts speaker volume. 1 Getting Started F (Function) : Selects the function and input source. (Mute): Mutes the sound. PRESET.FOLDER W/S : -- Searches for a folder of MP3/WMA files. When a CD/USB containing MP3/WMA files in several folders is being played, press PRESET.FOLDER W/ S to select the folder you want to play. -- Chooses a preset number for a radio station. PROGRAM/MEMORY : -- Stores radio stations. -- Deletes all the saved stations. -- Creates a programmed list you want to listen to. AUTO DJ : Selects the AUTO DJ mode. (For more information refer to page 18) DELETE : -- Deletes MP3/WMA files. (USB only). -- Deletes a song on the programmed list. Replacement of battery (R03 ) (R03) Remove the battery cover on the rear of the Remote Control, and insert two (size AAA) batteries with 4 and 5 matched correctly. Getting Started 11 • • • • • • • • • • • • • • c• • • • • • • • • • • • • • REPEAT : Listens to your tracks/files repeatedly or randomly. 0 to 9 numerical buttons : Selects numbered tracks, files, or preset number. TUNING-/+ : Selects the radio stations. CLOCK : Sets a clock and checks a time. C/V (Skip/Search) : -- Skips Fast backward or Forward. ALARM : With the ALARM function you can turn CD, USB play and Tuner reception on at a desired time. -- Searches for a section within a track/file. • • • • • • • • • • • • • • d• • • • • • • • • • • • • • d/M (Play/Pause) : VOICE CANCELLER : You can enjoy the function while playing the music, by reducing singer vocal of music in the various source. -- Starts or pauses playback. Z (Stop) : SOUND EFFECT : Chooses sound impressions. SLEEP : Sets the system to turn off automatically at a specified time. (Dimmer : The display window will be darkened by half.) REGION EQ : Chooses region equalizer. RDS/SET : INFO -- RDS (Radio Data System) (Refer to the page 22.) -- Sees informations about your music. An MP3 file often come with ID3 tag. The tag gives the Title, Artist, Album or Time information. -- Confirms the setting. -- Sees the name of connected all Bluetooth device in Bluetooth mode. USB REC : USB direct recording. -- Stops playback or recording. -- Cancels DELETE function. -- In status of WIRELESS PARTY LINK Connection, device name of SLAVE unit appears in the MASTER unit and Device name of MASTER unit appears in the SLAVE unit. KEY CHANGER ( / ) : Changes the key to suit your vocal range. PTY : Searches radio stations by radio type. 1 Getting Started • • • • • • • • • • • • • • b• • • • • • • • • • • • • • 12 Getting Started Front panel a b c d e f g h 1 Getting Started a b 1/! (Power) : Switches the unit ON or OFF. e MIC +/- : Adjusts Microphone volume. f USB Port : You can play or record sound files by connecting the USB device. g Y/U F / WIRELESS LINK : -- Selects the function and input source. : Opens and closes the disc tray. -- Press and hold for 3 seconds to select WIRELESS PARTY LINK mode. -- Skips Fast backward or Forward. REGION EQ / BASS BLAST -- Chooses region equalizer. I/RDS : Stops playback or cancels DELETE function. / RDS (Radio Data System) -- Press and hold for 3 seconds to select BASS (BASS BLAST) effect directly. z - Starts or pauses playback. VOICE CANCELLER You can enjoy the function while playing the music, by reducing singer vocal of music in the various source. USB REC / DEMO -- Records to USB. -- Shows Demo mode c MIC 1 : Connect a microphone. d Display window -- Searches for a section within a track/ file. h VOL +/- : Adjusts speaker volume. LIGHTING / PARTY LINK -- Turns on/off the lighting effects. -- Press and hold for 3 seconds to select PARTY LINK mode. Getting Started 13 Rear panel a b c 1 Getting Started aPower cord bANTENNA (FM) cAUX IN (L/R) AUX OUT (L/R) 14 Connecting Optional Equipment Connection AUX IN Connection AUX OUT Connection Connect an input of auxiliary device to the AUX OUT (L/R) connector. If your device has only one input for audio(mono), connect it to the left audio jack on the unit. Connect an output of auxiliary device (Camcorder, TV, Player, etc) to the AUX IN (L/R) connector. 2 Connecting If your device has only one output for audio (mono), connect it to the left audio jack on the unit. Auxiliary device Red Audio cable Audio cable White PARTY LINK You can connect two units to play music together. DVD, Blu-ray player etc. The name of function about sound expansion between the compatible products wired or wirelessly was changed to PARTY LINK or WIRELESS PARTY LINK. 1. Connect AUX OUT connector on a unit to the AUX IN connector on the other unit using Audio cable. 2. Press and hold LIGHTING / PARTY LINK on the unit for 3 seconds connected through AUX OUT and then select LINK ON. “LINK ON” appears in the display window and change to “DELAY time” soon. 3.Press Y/U to adjust Delay setting. When “LINK ON” and “DELAY time” are displayed in the display window, you can adjust the delay time. 4.Press LIGHTING / PARTY LINK to save the Delay setting. Connecting 15 ,,Note yy This function is available on CD, USB or BT (Bluetooth) Function. yy The initial Delay is 30 ms. If you want to change the Delay time, press Y/U. The connected device’s Delay may differ. If Audio Sync is not matched, adjust Delay of PARTY LINK to synchronize sound. Antenna Connection Connect the supplied FM antenna for listening to the radio. Connect the FM wire antenna to the FM antenna connector. FM antenna yy It is available to adjust the Delay from 0 ms to 200 ms. Synchronizing tempo is not available depending on devices. 2 Connecting yy Delay value is saved and PARTY LINK is turned off when the unit turns off. yy You can select LINK ON/LINK OFF mode by pressing and holding LIGHTING / PARTY LINK for 3 seconds on the unit yy VOICE CANCELLER setting is not synchronized with MASTER unit. USB Connection Connect a USB device (or MP3 player, etc.) to the USB ports on the unit. USB device ,,Note Removing the USB device from the unit : 1. Choose a different function/mode or press Z on the remote control or I/RDS on the unit twice in a row. 2. Remove the USB device from the unit. ,,Note Be sure to fully extend the FM wire antenna. 16 Operating Basic Operations CD/USB Operations 1. Insert the disc by pressing B on the remote control or on the unit Or connect the USB device to the USB port. 2. Select CD or USB function by pressing F / WIRELESS LINK. To 3 Operating Do this Press Z on the remote control or Stop I/RDS on the unit. Press d/M on the remote control or Playback z on the unit. Press d/M on the remote control or Pause z on the unit during playback. Searching Press C/V on the remote for a section control or Y/U on the unit within a track/ during playback and release it at the file point you want to listen to. Selecting Press 0 to 9 numerical buttons on a track/file the remote control to go to the directly desired file or track directly. -- In stop status, Press C/V on the remote control or Y/U on the unit to go to the next/previous track/file. -- During Playback, Skipping to the next/ previous track/file Press V on the remote control or U on the unit to go to the next track/file. Playing less than 2 seconds, press C on the remote control or Y on the unit to go to the previous track/file. Playing after 3 seconds, press C on the remote control or Y on the unit to go to the beginning of the track/file. Playing Press REPEAT on the remote repeatedly or control repeatedly. Refer to the note randomly for details about the display change. ,,Note yy The display changes in the following order. USB MP3/WMA CD AUDIO CD RPT 1 RPT 1 RPT 1 RPT*DIR RPT DIR - RPT ALL RPT ALL RPT ALL RANDOM RANDOM RANDOM OFF OFF OFF *DIR : Directory yy When you play the programmed list, only RPT 1 and RPT ALL are available. yy Even after restarting the unit or switching one function to another, you can listen to music from the point where it’s last been played. yy If you leave the disc tray open for 5 minutes, it will close automatically. Auto Play -- AUDIO/MP3/WMA CD is played automatically after Disc tray is open and then closed. -- Automatically switches to the CD function if Disc tray is open and then closed when there is no disc in Disc tray. Operating 17 Selecting a folder and an MP3/WMA file 1.Press PRESET.FOLDER W/S on the remote control repeatedly until a desired folder appears. 2.Press d/M to play it. The first file of folder will play. ,,Note yy CD / USB Folders/Files are recognized as below. * Deleting an MP3/WMA file You can delete file, folder or format by pressing DELETE. This function is supported only in stop status. (USB only) 1. -Select the file you want to delete and press DELETE. -Select the folder you want to delete by pressing PRESET.FOLDER W/S on the remote control and press DELETE. -Press and hold DELETE to format the USB device. Or Press DELETE repeatedly during selecting the MP3/WMA file. - DEL FILE : Deletes file - DEL DIR : Deletes folder - FORMAT : Formats USB 2. To delete file/folder or format, press d/M on the remote control or press z on the unit. If you want to exit the current mode, press Z on the remote control or press I/RDS on the unit. >>Caution yy Do not extract the USB device during operation. (play, delete, etc.) yy Regular back up is recommended to prevent data loss. yy If there is no file in a folder, the folder will not appear. yy Folders will be presented as the following order; ROOT FOLDER 1 FOLDER 3 FOLDER 7 FOLDER 8 FOLDER 5 FOLDER 6 yy File will be played from $ file No.1 to $ file No.14 one by one. yy Files and folders will be presented in order recorded and may be presented differently according to the record circumstances. yy *ROOT : The first screen you can see when a computer recognize the USB is “ROOT”. yy The delete function may not be supported according to the USB status. (lock, etc.) 3 Operating The display changes in the following order. 18 Operating Playback Effect Using BLUETOOTH® wireless technology AUTO DJ Auto DJ blends the end of one song into the beginning of another for seamless playback. It equalizes volume across tracks/files for uninterrupted playback. Press AUTO DJ on the remote control repeatedly, the display changes as followings. AUTO DJ RANDOM -> AUTO DJ SEQUENTIAL -> AUTO DJ OFF 3 Operating Mode Display Window Description OFF AUTO DJ OFF - RANDOM AUTO DJ RANDOM The music is played randomly on this mode. AUTO DJ SEQUENTIAL The music is played repeatedly on this mode. REPEAT ,,Note yy AUTO DJ mode does not support searching for a section within a track/file or to play repeatedly or randomly. yy If you move to other functions or stop the music using I/RDS on the unit (or Z on the remote control) on AUTO DJ mode, AUTO DJ will be disable. yy AUTO DJ is not supported in the music file whose length is less than 60 seconds. yy During recording, AUTO DJ is not available. yy Only AUTO DJ SEQUENTIAL is selected when played the programmed list. About BLUETOOTH Bluetooth is wireless communication technology for short range connection. The sound may be interrupted when the connection interfered by the other electronic wave or you connect the bluetooth in the other rooms. Connecting individual devices under Bluetooth wireless technology does not incur any charges. A mobile phone with Bluetooth wireless technology can be operated via the Cascade if the connection was made via Bluetooth wireless technology. Available Devices : Mobile phone, MP3, Laptop, PDA. BLUETOOTH Profiles In order to use Bluetooth wireless technology, devices must be able to interpret certain profiles. This unit is compatible with following profile. A2DP (Advanced Audio Distribution Profile) Codec : SBC Operating 19 Listening to music stored on the BLUETOOTH devices Pairing your unit and Bluetooth device 3. When this unit is successfully connected with your Bluetooth device, “PAIRED” will be appear on the display window and change to Bluetooth device name soon. Then “BT” will be appear on the display window. Before you start the pairing procedure, make sure the Bluetooth feature is activated on your Bluetooth device. Refer to your Bluetooth device’s user guide. Once a pairing operation is performed, it does not need to be performed again. yy "PAIRED" will momentarily appear on the display when you connect other devices for multi pairing. 1. Select the Bluetooth function by using F / WIRELESS LINK on the unit until BT function is selected. “BT READY” appears on the display window. ,,Note yy XX means the last two digits of Bluetooth address. For example, if your unit has a Bluetooth address such as 9C:02:98:4A:F7:08, you will see “LG OM4560(08)” on your Bluetooth device. yy Depending on the Bluetooth device type, some devices may have a different pairing process. Enter the PIN code (0000) as needed. yy You can connect this unit with up to 3 Bluetooth devices simultaneously using the same method as described above, only in the Bluetooth function. yy The multi pairing connection is only supported on Android or iOS devices. (Multi pairing connection may not be supported depending on the connected device specifications.) yy Removable/detachable Bluetooth devices (Ex: Dongle etc.) will not support multi pairing. yy You can connect only one Bluetooth device in the MASTER unit. You cannot connect Bluetooth device to the SLAVE unit. yy If the device name is unavailable, “_” will be displayed. 4. Listen to music. To play a music stored on your Bluetooth device, refer to your Bluetooth device’s user guide. ,,Note yy When using Bluetooth® technology, you have to make a connection between the unit and the bluetooth device as close as possible and keep the distance. However, it may not work well in certain situations as described below : -- There is a obstacle between the unit and the bluetooth device. -- There is a device using same frequency with Bluetooth® technology such as a medical equipment, a microwave or a wireless LAN device. yy You should connect your bluetooth device to this unit again when you restart it. yy Even if this unit connected up to 3 Bluetooth devices in the Bluetooth mode, you can play and control music by using only one of the connected devices. 3 Operating 2. Operate the Bluetooth device and perform the pairing operation. When searching for this unit with the Bluetooth device, a list of the devices found may appear in the Bluetooth device display depending on the type of Bluetooth device. Your unit appears as “LG OM4560(XX)”. ,,Note 20 Operating ,,Note yy When this unit connected with multiple Bluetooth devices, only one device which you are playing keeps Bluetooth connection when you change the function to the others. ,,Note yy The sound may be interrupted when the connection has interference from other electronic devices. yy Only Android OS is available to use “Music Flow Bluetooth” app with this unit. yy You may not control the Bluetooth device with this unit. yy It is recommended to use the latest version of app. yy Depending on the type of the device, you may not be able to use the Bluetooth function. yy You can enjoy wireless system using phone, MP3, Notebook, etc. 3 Using the Music Flow Bluetooth App Operating yy The more distance between the unit and the bluetooth device, the lower the sound quality becomes. yy Bluetooth connection will be disconnected when the unit is turned off or the Bluetooth device gets far from the unit. yy When Bluetooth connection is disconnected, connect the bluetooth device to the unit again. yy When a Bluetooth device is not connected, “BT READY” appears on the display window. yy When you use the BT function, adjust the volume to a proper level on the Bluetooth device. yy If it is not in the BT function, only one device can be connected. About “Music Flow Bluetooth” App “Music Flow Bluetooth” app brings a suite of new features to this unit. To enjoy more features, you are recommended to download and install free “Music Flow Bluetooth” app. Install “Music Flow Bluetooth” App onto Your Bluetooth Device There are two ways to install “Music Flow Bluetooth” App onto Your Bluetooth Device. Install “Music Flow Bluetooth” App through QR code 1. Install “Music Flow Bluetooth” app through QR code. Use the scanning software to scan the QR code. yy If a Bluetooth device is connected when using LG TV, LG TV is disconnected and the Bluetooth device is connected. yy When you connect Bluetooth device (iOS device etc.) to this unit or operate the device, the volume level can be synchronized with each other. 2. Tap an icon for installation. 3. Tap an icon for downloading. ,,Note yy Make sure that your Bluetooth device is connected to the Internet. yy Make sure that your Bluetooth device has a scanning software application. If you don’t have one, download one from “Google Android Market (Google Play Store)”. yy Depending on the area, QR code may not work. Operating 21 Install “Music Flow Bluetooth” App through “Google Android Market (Google Play Store)” 1. Tap the “Google Android Market (Google Play Store)” icon. Activate Bluetooth with “Music Flow Bluetooth” App “Music Flow Bluetooth” app helps to connect your Bluetooth device to this unit. 2. In the search bar, type in the “Music Flow Bluetooth” and search it. 1. Tap “Music Flow Bluetooth” app icon on the home screen to open “Music Flow Bluetooth” app, and go to the main menu. 3. In the search result list, find and tap “Music Flow Bluetooth” to start downloading Bluetooth app. 2. Tap [Menu] and select the unit you want. 4. Tap an icon for installation. 5. Tap an icon for downloading. ,,Note yy Make sure that your Bluetooth device is connected to the Internet. ,,Note yy “Music Flow Bluetooth ” app will be available in the software version as follow; -- Android O/S : Ver 4.0.3 (or later) yy If you use “Music Flow Bluetooth ” app for operation, there would be some differences between “Music Flow Bluetooth ” app and the supplied remote control. Use the supplied remote control as necessary. yy Depending on the Bluetooth device, “Music Flow Bluetooth ” app may not work. yy After connection of “Music Flow Bluetooth ” app, music may be output from your device. In this case, try connecting procedure again. yy If you operate the other applications or change the settings on your Bluetooth device while using “Music Flow Bluetooth ” app, “Music Flow Bluetooth ” app may operate abnormally. yy When “Music Flow Bluetooth ” app operates abnormally, check your Bluetooth device and the connection of “Music Flow Bluetooth ” app and then try to connect again. yy Depending on the smart phone's operating system, you have some differences for “Music Flow Bluetooth ” operation. yy Check Bluetooth setting on your Bluetooth device if “Music Flow Bluetooth ” app connection does not work well. 3 Operating yy Make sure that your Bluetooth device is equipped with “Google Android Market (Google Play Store)”. 3. If you want to get more information to operate, tap [Help] on the [Setting] menu. 22 Operating Radio Operations Be sure that FM antenna is connected. (Refer to page 15) Listening to the radio 3 Deleting all the saved stations 1. Press and hold PROGRAM/MEMORY on the remote control for two seconds. “ERASEALL” will flash up on the unit display. 2.Press PROGRAM/MEMORY on the remote control to erase all the saved radio stations. Operating 1.Press F / WIRELESS LINK repeatedly until FM appears in the display window. The last received station is tuned in. Seeing information about a Radio station 2. Auto tuning : Press and hold TUNING-/+ on the remote control or Y/U on the unit for about two seconds until the frequency indication starts to change, then release. Scanning stops when the unit tunes in a station. The FM tuner is supplied with the RDS (Radio Data System) facility. This shows information about the radio station being listened to. Press RDS/SET on the remote control repeatedly to cycle through the various data types: Or Manual tuning : Press TUNING-/+ on the remote control or Y/U on the unit repeatedly. 3. Adjust the volume by pressing VOL +/- on the unit or remote control repeatedly. Presetting the Radio Stations PS The name of the channel will appear in the display. PTY RT 3.Press PROGRAM/MEMORY on the remote control. A preset number will blink in the display window. 4.Press PRESET.FOLDER W/S on the remote control to select the preset number you want. 5. Press PROGRAM/MEMORY on the remote control. The station is stored. 6. Repeat steps 2 to 5 to store other stations. 7. To listen a preset station, press PRESET.FOLDER W/S or 0 to 9 numerical buttons on the remote control. (Radio Text) A text message contains special information from the broadcast station. Before tuning, make sure to turn down the volume. 2. Select the desired frequency by pressing TUNING -/+ on the remote control or Y/U on the unit. (Programme Type Recognition) The programme type (e.g. Jazz or News) will appear in the display. You can preset 50 stations for FM. 1.Press F / WIRELESS LINK until FM appears in the display window. (Programme Service Name) This text may scroll across the display. CT (Time controlled by the channel) This shows the time as broadcast by the station. You can search the radio stations by programme type by pressing RDS/SET on the remote control. The display will show the last PTY in use. Press PTY one or more times to select your preferred programme type. Press and hold C/V. The tuner will search automatically. When a station is found the search will stop. Operating 23 Sound adjustment Setting the sound mode This system has a number of pre-set surround sound fields. The displayed items for the Equalizer may be different depending on sound sources and effects. You can select a desired sound mode by using SOUND EFFECT on the remote control. On Display BASS (BASS BLAST) Reinforces the treble, bass and surround sound effect. This program lends an enthusiastic atmosphere to the sound, giving you the feeling you are at an actual rock, pop, jazz or classic concert. FOOT BALL You can enjoy the sound effect FOOTBALL STADIUM. STANDARD You can enjoy optimized sound. On Display Region Description FUNK, REGUETON, SAMBA, BANDA, MERENGUE, AXE, Latin SALSA, SERTANEJ, America CUMBIA, TECNO BR, FORRO ARABIC DONGDUT Optimized sound effect for the Middle East music genre prefered in Indonesia each region. . AFRO Africa INDIA India ,,Note By pressing and holding REGION EQ / BASS BLAST for 3 seconds on the unit you can directly select BASS (BASS BLAST) effect. 3 Operating POP CLASSIC ROCK JAZZ Description You can select a desired sound mode by using REGION EQ on the remote control. 24 Operating Advanced Operations Recording to USB You can record a various sound source to USB. (CD, AUX, Tuner) 1. Connect the USB device to the unit. 2.Press F / WIRELESS LINK to select a function you want to record. 3 Operating One track/file recording - You can record to USB after playing a track/file you want. All tracks/files recording - You can record to USB in full stop status. Programmed list recording - After showing the Programmed list, you can record it to USB. (Refer to page 26) 3. Start the recording by pressing USB REC/DEMO. 4. To stop recording, press I/RDS on the unit or Z on the remote control. Pausing recording During recording, press T on the unit or d/M on the remote control to pause recording. Press it again to restart recording. (Tuner/AUX only) ,,Note yy You can control recorded MIC sound according to MIC volume when you record in AUDIO CD X1 speed REC. yy VOICE CANCELLER or KEY CHANGER will be reset, if you use recording function during operating VOICE CANCELLER or KEY CHANGER. yy VOICE CANCELLER or KEY CHANGER can not be operated during recording. To select recording bit rate and speed 1. Press and hold USB REC/DEMO for 3 seconds. 2.Press C/V on the remote control or Y/U on the unit to select a bit rate. 3. Press USB REC/DEMO to set. 4.Press C/V on the remote control or Y/U on the unit to select a desired recording speed. (AUDIO CD only) X1 SPEED - You can listen to music while recording it. X2 SPEED - You can just record the music file. 5. Press USB REC/DEMO to finish the setting. The making of unauthorized copies of copyprotected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes. Be responsible Respect copyrights Operating 25 ,,Note yy You can check the recording percentage rate for the USB record on the display window during the recording. (MP3/WMA, CD Only) yy During recording MP3/WMA, there is no sound. yy For stable recording, the output sound level goes down on its own when you record music from CD to USB. yy When you stop recording during playback, the file that has been recorded at that time will be stored. (Except MP3/WMA files) yy Do not remove the USB device or turn off the unit during USB recording. If does not, an incomplete file may be made and not deleted on PC. yy Multi card reader device or External HDD can not be used for USB recording. yy A file is recorded by about 512 Mbyte when you record for a long term. yy You can control recorded MIC sound according to MIC volume. yy You may not store more than 2000 files. yy You can not record in AUTO DJ mode. yy On CD function, sound of MIC is recorded only during AUDIO CD X1 speed REC. It is recorded AUDIO CD source too. yy In case of the unsupported MP3/WMA file, the file recording may be stopped. yy It’ll be stored as follows. AUDIO CD MP3/WMA 3 AUX Tuner Tuner : The current recording frequency is shown. Operating yy If USB recording does not work, the message like “NO USB”, “ERROR”, “USB FULL”, “NOT SUPPORT” or “FILE MAX” is displayed on the display window. ,,Note 26 Operating Programmed Playback Deleting Programmed list The program function enables you to store your favorite files from any disc or USB device. Deleting function only works in the edit mode. A program can contain 20 tracks/files for each media. (CD, USB) Possible to save a total of 40 tracks/files. Making Programmed list 2. Select a song by pressing PROGRAM/MEMORY or PRESET.FOLDER W/S on the remote control repeatedly. It is supported only on stop status. 3.Press DELETE while a song is selected. 1.Press PROGRAM/MEMORY on the remote control. 2.Press C/V on the remote control to select a track/file. 3 1.Press PROGRAM/MEMORY on the remote control in stop status. 3.Press PROGRAM/MEMORY on the remote control to save and select a next track/file. Operating 4. Repeat steps 2 - 3 to store other tracks/files. (You can modify the list by pressing PRESET.FOLDER W/S on the remote control to select the program number.) 5. Press PROGRAM/MEMORY on the remote control once again. To play the programmed list, press d/M after you make the list. ,,Note When making or modifying the programmed list, REPEAT mode is off. ,,Note yy Program is switched off in the case below. -- Changing to a different function. -- Turning off and on the unit. -- Operating the numeric buttons on the remote control. yy Programmed list is cleared in the case below. -- Removing the disc or the USB device. -- Deleting or recording music files in the USB device. -- Unplugging the Power Cord. Operating 27 Other Operations Turn off the sound temporarily Press on the remote control to mute your sound. You can mute your unit, for example, to answer the telephone, the “MUTE” will appear in the display window. To cancel it, press level. again or change the volume Displaying file information (ID3 TAG) DEMO In the power off state, press USB REC/DEMO on the unit once. The unit will power on and display the each of functions in the display window. To cancel the DEMO function, press USB REC/DEMO once more. ,,Note yy While in DEMO, this unit will keep DEMO status even if you unplug the power cord connection. yy You can enjoy other functions during the DEMO, the DEMO will temporarily pause. - Without input key in 10 sec, the DEMO will play back automatically. 1. Connect your microphone to the MIC jack. 2. Play the music you want. 3. Sing along with the accompaniment. Adjust the microphone volume by pressing MIC +/- on the unit. ,,Note yy When not using the microphone, set the microphone volume to minimum by pressing MIC - or turn off the MIC and remove the microphone from the MIC jack. yy If the microphone is set too near the speaker, a howling sound may be produced. In this case, move the microphone away from the speaker or decrease the sound level by using the MIC -. yy If sound through the microphone is extremely loud, it may be distorted. In this case, set the microphone volume to minimum by pressing MIC -. VOICE CANCELLER You can enjoy the function while playing the music, by reducing singer vocal of music in the various source. Press the VOICE CANCELLER, and “ON” will appear in display window. To cancel it, press VOICE CANCELLER again. The quality of the VOICE CANCELLER may be different depending on the recording conditions of music files. ,,Note yy This function is available CD, USB or BT (Bluetooth) Function. yy If the function is not available, “NOT SUPPORT” appears in the display window. yy This function is available to use only when a microphone is connected. yy If a microphone is not connected, “NOT SUPPORT” appears in the display window. yy It is not available on the MONO source. yy To initialize it, change the Function or disconnect the microphone. yy This function may not be initialized depending on the status of connected devices. 3 Operating While playing an MP3 file containing file information, you can display the information by pressing INFO. Using Microphone 28 Operating Setting the Clock KEY CHANGER You can adjust the key to 9 steps (4 steps higher, 4 steps lower and the original key). 1. Turn the unit on. yy To sharp the key one by one, press the KEY CHANGER( ) on the remote control repeatedly during playback. 2. Press and hold CLOCK. 3. Select time mode by pressing C/V on the remote control. yy To flatten the key one by one, press the KEY CHANGER( ) on the remote control repeatedly during playback. - AM 12:00 (for an AM and PM display) or 0:00 (for a 24 hour display) 4.Press RDS/SET to confirm your selection. ,,Note 5. Select the hours by pressing C/V on the remote control. yy This function is available CD, USB or BT (Bluetooth) Function. yy If a microphone is not connected, “NOT SUPPORT” appears in the display window. 3 Operating yy To initialize it, change the Function, disconnect the microphone or change the music. yy This function may not be initialized depending on the status of connected devices. LIGHTING The function is to create a Club like atmosphere by operating speaker lighting. 1.Press LIGHTING / PARTY LINK on the unit. The mode changes each time you press it : OFF SPARKLE VOLCANO POLICE THUNDER PSYCHE CAOS OFF ,,Note yy Lighting function is available in all functions. yy Lighting mode retains its previous mode when you first press LIGHTING / PARTY LINK, press again to change modes. yy Operation may be different depending on the played music, connected device or setting status. 6.Press RDS/SET. 7. Select the minutes by pressing C/V on the remote control. 8.Press RDS/SET. Setting the Clock through “Music Flow Bluetooth” App Install “Music Flow Bluetooth” app on your Android device. (Refer to page 20) Your unit’s clock will be automatically synchronized with your device by activating Bluetooth connection through “Music Flow Bluetooth” app. Operating 29 Using your player as an alarm clock 1. Turn the unit on. 2. Press and hold ALARM. 3.Press C/V on the remote control to change the hours and minutes and press RDS/SET. to save. 4.Press C/V on the remote control to select function and press RDS/SET to save. - Press C/V on the remote control to select a memory No. when you select Tuner and then, press RDS/SET. If there is no memory No., this step is skipped. ,,Note yy If you set the clock time, you can check the time by pressing CLOCK even when the player is turned off. yy You can set alarm after you set the clock time. yy If you set the clock time and alarm, you can check the setting informaiton by pressing ALARM even when the unit is turned off. yy You can select ALARM ON/OFF mode by pressing ALARM. Press SLEEP repeatedly to select delay time between 10 and 180 minutes. After the delay time, the unit will be turned off. To cancel the sleep function, press SLEEP repeatedly until “SLEEP 10” appears, and then press SLEEP once again while “SLEEP 10” is displayed. ,,Note yy You can check the remaining time before the unit is turned off. yy Press SLEEP. The remaining time appears in the display window. Dimmer Press SLEEP once. The display window will be darkened by half. To cancel it, press SLEEP repeatedly until dim off. ,,Note All the LED turns off when Dimmer is being operated. 3 Operating 5. Press C/V on the remote control to change the volume and press RDS/SET to save. Sleep Timer Setting 30 Operating Auto power down This unit will turn itself off to save electricity in the case were the main unit is not connected to an external device and is not used for 20 minutes. The unit will also turn itself off after six hours if the Main unit has been connected to another device using the analog inputs. Auto power down function is applied to only MASTER unit in case of WIRELESS PARTY LINK connection. In case of SLAVE unit, Auto power down is available after disconnecting SLAVE unit and MASTER unit. 3 Operating How to disconnect the wireless network connection or the wireless device. Turn off the unit by pressing the power button for more than 5 seconds. AUTO POWER On This unit automatically turns on by an input source : LG TV or Bluetooth If you try to connect your Bluetooth device, this unit turns on and connects your Bluetooth device. You can play your music. ,,Note yy Depending on the connected device, this function may not operate. yy Depending on the connected device, the unit turns on but Bluetooth function may not be connected. yy If you disconnect Bluetooth connection by this unit, some Bluetooth devices try to connect to the unit continually. Therefore it is recommended to disconnect the connection before turning off the unit. yy If you try to connect to the “Music Flow Bluetooth” app, Bluetooth function of this unit is turned on. yy If you turn on the unit using LG TV or Bluetooth function, proper function of this unit is turned on. yy If you have already paired with this unit, automatically this unit can turn on by an input source when this unit is turned off. yy If you turn off the unit by pressing the power button for more than 5 seconds, Auto Power On function is disabled. To activate it, turn on the unit. Operating 31 Auto function change This unit recognizes input signals such as Bluetooth and LG TV and then changes suitable function automatically. When you try to connect Bluetooth device When you try to connect your Bluetooth device to this unit, Bluetooth function is selected. Play your music on the Bluetooth device. When LG TV is connected When you turn on your LG TV connected by LG Sound Sync, this unit changes the function to LG TV. You can hear the sound from your TV. yy This function only works with devices that were previously connected. You can control some functions of this unit by your TV’s remote control with LG Sound Sync. It is compatible with LG TV that supports LG Sound Sync. Make sure your TV has the LG Sound Sync logo. Controllable function by LG TV’s remote control : Volume up/down, mute Refer to the TV’s instruction manual for the details of LG Sound Sync. 1. Turn on the unit by pressing 1/!(Power). 2. Press F / WIRELESS LINK until LG TV function is selected. 3. Set up the sound output of TV to listen to the sound through this unit : TV setting menu [Sound] -> [TV Sound output] -> [LG Sound Sync (Wireless)] “PAIRED” appears on the display window for about 3 seconds and then you can see “LG TV” on the display window if the TV and this unit are connected normally. 3 Operating ,,Note yy This function is not available during recording or deleting. LG Sound Sync 32 Operating ,,Note yy You can also use the remote control of this unit while using LG Sound Sync. If you use TV’s remote control again, the unit synchronizes with the TV. yy If the connection fails, check the conditions of this unit and your TV : power, function. yy Make sure of the condition of this unit and the connection in the cases below when using LG Sound Sync. -- Turn off the unit. -- Changing to a different function. 3 WIRELESS PARTY LINK Connection The output sound of (MASTER) unit is expanded to (SLAVE) unit. It is compatible with unit that supports WIRELESS PARTY LINK. The name of function about sound expansion between the compatible products wired or wirelessly was changed to PARTY LINK or WIRELESS PARTY LINK. -- Disconnecting the wireless connection caused by interference or a distance. Operating yy The amount of time to turn off this unit is different depending on your TV. yy If you try to change the function on using the LG TV function, volume will be change according to the LG TV volume level. yy Details of TV setting menu vary depending on the manufacturers or models of your TV. yy If you connect LG Sound Sync when “Music Flow Bluetooth” app is connected, control through the app is available. yy If you turned off the unit directly by pressing 1/!(Power), LG Sound Sync will be disconnected. To use this function again, you should reconnect the TV and the unit. yy If an LG TV is connected when using Bluetooth, Bluetooth is disconnected and the LG TV is connected. 1. Press and hold F / WIRELESS LINK on the unit for 3 seconds. PARTY LINK MODE SELECT appears in the display window. 2.Press Y/U on the unit to select MASTER or SLAVE. - unit : Selects MASTER. - unit : Selects SLAVE. Two units try to connect with each other. 3. When this unit is successfully connected each other, “Slave Device Name CONNECTED” appears in the MASTER unit. “CONNECTED TO Master Device Name” appears in the SLAVE unit and change to SLAVE soon. Operating 33 ,,Note yy If you using the LG Sound Sync, this function is not available. If you connect the LG TV Function, “NOT SUPPORT” appears in the display window. yy You can use microphone in the SLAVE unit only. In case of SLAVE unit, some functions are supported only. 3 Operating yy You can connect only one Bluetooth device in the MASTER unit. You cannot connect Bluetooth device to the SLAVE unit. yy When WIRELESS PARTY LINK is disconnected, SLAVE unit is changed to BT function. yy If the connection is failed, “FAILED” appears in the display window. yy Mute function is synchronized with each other. yy WIRELESS PARTY LINK connection will be disconnected when you turn off the unit or press and hold the F / WIRELESS LINK on the unit for 3 seconds. yy When WIRELESS PARTY LINK is connected, you can not connect the PARTY LINK. yy WIRELESS PARTY LINK connection is only supported on Android or iOS devices. (WIRELESS PARTY LINK connection may not be supported depending on the connected device specifications or OS.) yy Removable/detachable Bluetooth devices (ex. Dongle etc.) will not support WIRELESS PARTY LINK connection. yy When WIRELESS PARTY LINK is connected, Blutooth connection is not available in status of recording or deleting. 34 Troubleshooting Troubleshooting Problem Cause & Solution yy Turn off the power of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and turn it on again. The unit does not work properly. yy Disconnect the power cord of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting again. yy Previous setting may not be saved when device power is shut off. 4 No Power. yy The power cord is not plugged in. Plug in the power cord. yy Check whether electricity failed. Check the condition by operating other electronic devices. No sound. yy Check whether you select right function. Press F / WIRELESS LINK and check the selected function. Troubleshooting The unit does not start playback. yy An unplayable disc is inserted. Check the playable disc. yy No disc is inserted. Insert a disc. yy The disc is dirty. Clean the disc. (Refer to page 35) yy The disc is inserted upside down. Place the disc with the label or printed side facing upwards. yy The antenna is positioned or connected poorly. Connect the antenna securely. Radio stations cannot be tuned in properly. yy The signal strength of the radio station is too weak. Tune to the station manually. yy No stations have been preset or preset stations have been cleared (when tuning by scanning preset channels). Preset some radio stations, see page 22 for details. yy The remote control is too far from the unit. Operate the remote control within about 7 m. The remote control does yy There is an obstacle in the path of the remote control and the unit. Remove the obstacle. not work properly. yy The batteries in the remote control are exhausted. Replace the batteries with new ones. No speaker light LG Sound Sync does not work. yy Check the speaker light effects by pressing LIGHTING / PARTY LINK.. yy Check whether your LG TV supports LG Sound Sync. yy Check connection of LG Sound Sync. yy Check sound setting of your TV and this unit. Appendix 35 Maintenance Handling the Unit When shipping the unit Notes on Discs Handling Discs Never stick paper or tape on the disc. Storing Discs Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. Do not use volatile liquids such as insecticide spray near the unit. Wiping with strong pressure may damage the surface. Do not leave rubber or plastic products in contact with the unit for a long period of time. Cleaning Discs Cleaning the unit Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center to out. To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit. Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for old vinyl records. Maintaining the Unit 5 Appendix The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. For details, please contact your nearest authorized service center. 36 Appendix General specifications General Power requirements Refer to the main label. Refer to the main label. Power consumption Networked standby : 0.5 W (If all network ports are activated.) Dimensions (W x H x D) Approx. 451.5 mm x 311 mm x 302.5 mm Net Weight (Approx.) Approx. 7.5 kg Operating temperature 5 °C to 35 °C Operating humidity 5 % to 90 % Inputs / Outputs Analog audio in (AUX IN) 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) Analog audio out (AUX OUT) 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) Microphone Sensitivity 15 mV (1 kHz), 6.3 mm jack x 1 Tuner FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.00 MHz 5 Appendix Amplifier (RMS Output power) Total 220 W x 1 (3 Ω at 1 kHz, 25 % THD) System Frequency Response 80 Hz to 20 kHz Signal-to-noise ratio More than 75 dB (1 kHz) Dynamic range More than 80 dB Bus Power Supply (USB) 5 V 0 500 mA yy Design and specifications are subject to change without notice. Appendix 37 Trademarks and Licenses Bluetooth wireless technology is a system which allows radio contact between electronic devices. Connecting individual devices under Bluetooth wireless technology does not incur any charges. A mobile phone with Bluetooth wireless technology can be operated via the Cascade if the connection was made via Bluetooth wireless technology. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners. 5 Appendix
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Home audio micro system 220 W Black
- Optical disc player
- 2-way
- Bluetooth
- USB port Microphone in
- Equalizer