LG WK7 Owner’s Manual

built-in
OWNER’S MANUAL
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
WK7
WKM7
www.lg.com
MFL70521720
Copyright © 2018 LG Electronics Inc. All Rights Reserved
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: No naked flame sources, such as lighted
candles, should be placed on the apparatus.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
Getting Started
CAUTION concerning the Power Cord
3
NOTICE: For safety marking information including
product identification and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
Check the specification page of this owner’s manual
to be certain of the current requirements.
CAUTION when using this product in environments
of low humidity
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could result
in electric shock or fire. Periodically examine the
cord of your device, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of
the device, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the device.
yy It may cause static electricity in environments of
low humidity.
yy It is recommended to use this product after
touching any metal object which conducts
electricity.
For models using an adapter
Only use the AC adapter supplied with this device.
Do not use a power supply from another device or
another manufacturer. Using any other power cable
or power supply may cause damage to the device and
void your warranty.
1
Getting Started
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
4
Getting Started
Symbols
~
1
0
Refers to alternating current (AC).
Refers to direct current (DC).
Getting Started
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
Table of Contents
5
Table of Contents
1
1
Getting Started
2
Safety Information
6
Unique features
6
Introduction
7
Front
8Rear
2Connecting
9
9
9
10
10
13
Network connection
Setting up the Speaker
– Connecting the AC Adapter
– Installing “Google Home” App
– Launch the app to connect Wi-Fi
– Reference site for Google Assistant Help
3Operating
14
14
15
16
16
16
17
17
19
19
20
20
21
21
Basic Operations
– Function LED status
– Simple Operation Guide
How to use the Google Assistant
– Google Assistant LED status
– Talk to the Google Assistant
– Control Smart Home devices
– Voice command
LG Wi-Fi Speaker
– Installing "LG Wi-Fi Speaker" App
– BLUETOOTH connection lock
– Sound adjustment
Using BLUETOOTH® technology
– Listening to music stored on the
BLUETOOTH devices
23 Other Operations
23 – Turn off the microphone temporarily
23 – Auto function change
24 – Edit speaker name
24 – Resetting
4Troubleshooting
25
25
26
26
Troubleshooting
– General
– Network
– Application
2
5Appendix
27
27
28
29
Trademarks and Licenses
Handling the Unit
OPEN SOURCE
Specifications
3
4
5
6
1
Getting Started
Unique features
Introduction
BLUETOOTH®
Symbol used in this manual
Getting Started
Listen to music stored on your Bluetooth device.
"Google Home" application
You can enjoy various functions of this speaker by
connecting to network and your smart device with
"Google Home" app.
The speaker and your smart device must be
connected to the same network. Visit or "Google
Play” or “App Store” to search for "Google Home"
app. For detailed information, refer to page 10
Voice recognition
You can use a variety of voice commands to control
the speaker with Google Assistant.
"LG Wi-Fi Speaker" application
Listens to music stored on your smart device.
You can control this speaker with your iPhone or
Android device via "LG Wi-Fi Speaker" app. Visit
"Google Play” or “App Store” to search for "LG Wi-Fi
Speaker" app. For detailed information, refer to page
19
yy Depending on the application’s version and the
software of smart device, "LG Wi-Fi Speaker" app
may not be operated normally.
yy Some smart devices may not be compatible with
this speaker.
,,Note
Indicates special notes and operating features.
>>Caution
Indicates cautions for preventing possible damages
from abuse.
Getting Started
7
Front
a
1
Getting Started
b
c
g
d
e
f
a
Plays, pauses or skip playback.
bFunction LED
Changes LED status in according function.
Bluetooth: Blue / Wi-Fi: White (Page 14)
c (Function)
Changes Wi-Fi or Bluetooth. (Page 15)
d
-- Use
in instead of saying "Hey Google" by long
pressing the (Page 16)
-- Plays
or pauses a music and stops the Google
Assistant feedback. (Page 15)
e ,
Adjusts the volume.
fBuilt-in microphones
gGoogle Assistant LED
Changes LED status according to Google
Assistant performance. (Page 16)
,,Note
Precautions in using the touch buttons
yy Use the touch buttons with clean and dry
hands.
- In a humid environment, wipe out any
moisture on the touch buttons before using.
yy Do not press the touch buttons hard to make
it work.
- If you apply too much strength, it can be
damaged the sensor of the touch buttons.
yy Touch the button that you want to work in
order to operate the function correctly.
yy Be careful not to have any conductive
material such as metallic object on the touch
buttons. It can cause malfunctions.
Getting Started
8
Rear
1
Getting Started
a
b
a
(Microphone off) button
Enables or disables the Google Assistant
Microphone (voice recognition) (Page 23)
c
bDC IN (AC adapter input)
cRESET
Initialize information of existing connection.
(Page 24)
Connecting
Network connection
Setting up the Speaker
You can enjoy various functions of this speaker by
connecting to network and your smart device with
"Google Home" app.
Connecting the AC Adapter
Choose the connection method considering your
network environment.
9
Connect the speaker to the power supply with the
supplied AC adapter.
1. Connect the supplied AC power cord to DC IN
adapter input.
2. Plug the AC power cord into an AC outlet.
2
Connecting
The "Google Home" app is required to connect the
speaker wirelessly to the network.
3. Function LED rotates for tens of seconds (Approx.
30 ~ 50 seconds) during booting.
4. The speaker has completed booting when
Function LED blinks in white with the sound.
,,Note
If the speaker is connected to Wi-Fi, Function
LED is solid white when booting is completed.
>>Caution
Only use the AC adapter supplied with this
device. Do not use a power supply from another
device or manufacturer. Using any other power
cable or power supply may cause damage to the
device and void your warranty.
10 Connecting
Installing “Google Home” App
Launch the app to connect Wi-Fi
The "Google Home" app allows you to use various
functions of this speaker through your smart device:
There are a ways to install “Google Home” app onto
your Smart device.
Make sure your smart device Wi-Fi feature is turned
on. Once a connecting operation is performed, it does
not need to be performed again.
Requirements before setup
2
Connecting
yy A wireless router must be connected to the
internet. A smart device such as Android or iOS
devices must be connected to the wireless router
via Wi-Fi connection.
,,Note
In case of iOS devices, it should be turned on
Bluetooth setting on your smart device.
1. Tap the "Google Home" icon to launch the app.
yy It needs Google account to use this app. During
connect Wi-Fi, this app may request to create
Google account.
Through "Google Play or “App Store”
1. Tap the“Google Play Store” icon or “App Store”
icon on your smart device.
2. Type in “Google Home” in the search bar and tap
“Search” on “Google Play” or “App Store”
3. Select “Google Home” in the search result list to
download.
2. Follow the screen on app to set speaker. Follow
these instructions in order.
a
Google Home
,,Note
yy Depending on the device version, “Google
Home” app may not work.
yy For more information, visit the web site.
https://www.google.com/cast/setup/
b
Connecting 11
c
g
2
h
e
i
f
i
Connecting
d
12 Connecting
j
3. When the speaker is properly connected to Wi-Fi,
the Function LED will be solid white with sound.
2
Connecting
k
,,Note
yy If the app is already installed, this speaker is
display in main screen of the app.
yy Depending on wireless router status, it might
not work well Wi-Fi connection.
yy It is recommended that you use WiFi Group
Play with less than 5 speakers.
l
yy For more information (Set up, Usage, Help
etc.), research “Google Assistant Help” or
visit the web site. http://support.google.com/
assistant
yy The speaker is not available for use on some
functions from the “Google Assistant Help”
site. (ex. Call etc.) (Page 13)
yy “Google Home” app is provided by Google. It
might be revised by a change of Google Policy.
yy The speaker is not compatible with ”Smart
ThinQ" app. Therefore it is not available in
setup and cannot be controlled by using
"Smart ThinQ" app
,,Note
yy For more information on the setup, visit
the web site. https://support.google.com/
assistant/answer/7538816
yy Use the same Wi-Fi connection to set the
speaker and your smart device.
yy If the Bluetooth setting turned on your
smart device, it will be easy to connect Wi-Fi.
yy During installation, you should create a
speaker name. It is needed when pairing the
Bluetooth device. You can check and edit
the speaker name. Follow the “Edit speaker
name”. (Page 24)
Connecting 13
Reference site for Google Assistant Help
https://support.google.com/assistant/answer/7538816
Listen to music
https://support.google.com/assistant/answer/7539710
Play music on your TV or speakers
https://support.google.com/assistant/answer/7539867
Play TV shows & movies
https://support.google.com/assistant/answer/7539991
Control smart home devices
https://support.google.com/assistant/answer/7540703
Create a shopping list
https://support.google.com/assistant/answer/7540969
Buy items on your shopping list
https://support.google.com/assistant/answer/7384588#speaker
Set up and manage My Day
https://support.google.com/assistant/answer/7393908#speaker
Listen to radio
https://support.google.com/assistant/answer/7540307
See which Google Account is linked
to your Assistant
https://support.google.com/assistant/answer/7539992
Control volume of your speakers
https://support.google.com/assistant/answer/7538817
Change your language https://support.google.com/assistant/answer/7394513#speaker
2
Connecting
Set up the Google Assistant on your
speakers
14 Operating
Basic Operations
Function LED status
3
LED
Status
Description
Operating
LED blinks in
white.
Ready for Wi-Fi
connection.
LED turns on
white with the
sound.
Wi-Fi
connection is
success.
LED blinks in
Blue with the
sound.
Searching for
Bluetooth
device.
LED turns on
Blue with the
sound.
Bluetooth
device is
connected.
,,Note
When operation of speaker is completed,
Function LED turns off after 3 seconds.
Operating 15
Simple Operation Guide
Function
How to
Status
Function LED turns on blue with the
sound.
Play / Pause
Tap
or
Plays or pause a song.
Forward skip
Tap
X2
Plays next song.
Backward skip
Tap
X3
Plays previous song.
Wi-Fi / Bluetooth
Tap
Volume control
Tap
The Google Assistant
Changes function and Function LED's
color. (Bluetooth: Blue / Wi-Fi: White)
or
Long press
(0~15 level).
2 seconds.
Tap
Enable/ Disable
Voice recognition
Press (Micropone off) on rear of
speaker.
Reset
Press RESET for 5 seconds. (Page
24)
,,Note
When you adjust volume, the Google
Assistant LED changes.
Activates the Google Assistant.
(= Hey Google)
Stops Google Assistant feedback
-- When microphone is off, the Google
Assistant LED turns on amber with
"The MIC is muted" sound.
-- When microphone is on, the Google
Assistant LED turns off with "The
MIC is back on" sound.
When speaker enter reset mode,
Function LED starts to rotate quickly
with sound.
yy Play, pause, skip, volume may not be supported depending on the your smart device or some of TV
operated differently.
yy The speaker might not synchronize volume with some of TV.
yy Some of PC may not be automatically connected to Bluetooth.
3
Operating
Bluetooth pairing
When Function LED blinks in blue,
select speaker name that is set on
“Google Home” app from phone’s smart
device list
16 Operating
How to use the
Google Assistant
Talk to the Google Assistant
Google Assistant LED status
You can use a variety of voice commands to control
this speaker with the Google Assistant. Try to say
a voice command to the speaker. The speaker will
activate the Google assistant and perform your voice
command.
Hey, Google.
Set the alarm at 4 PM.
There, your alarm
is set for 4 PM.
3
Operating
LED
,,Note
Status
Description
All four LEDs
are on.
Ready to listen
to your voice
command.
All four LEDs
blink.
Responds to
your voice
command.
Microphone
is off and the
solid amber
LED will be on.
Voice
recognition is
disable
The Google Assistant LED status may be
changed without notice.
1. Turn on the speaker and connect Wi-Fi. Follow
the "Setting up the Speaker". (page 9-13)
2. Say "Hey Google".
Or long press for 2 seconds on top of the
speaker.
Then the speaker is activated and ready to receive
your voice commands.
Hey,
Google.
Or
3. Just say the thing you want to do. Then the
speaker recognizes and performs your voice
command.
4. After a few seconds, the Google Assistant will
respond to your command.
,,Note
Each time you use voice recognition, say "Hey,
Google" or tap and long press the .
Operating 17
Comfortable Function
Voice command
With the Google Assistant built in, you can control
compatible smart home devices such as TV’s, lights,
switches, plugs, thermostats and more by simply
using your voice.
1.Time
"What time is it?", "What time is it now?", What
time is it in Spain?"
2. Weather
"What's the weather?", "What's the weather this
weekend?", "What's the weather in Paris?", "Will
it rain tomorrow?"
3.Plan
"Tell me about my day.", "What’s my next
meeting?", "Set a reminder to check schedule at
6pm."
4.Alarms
"Set an alarm" , "Set an alarm for 9am", "Wake
me up at 9am", "What alarms are set?"
6. Volume
"Volume level 9.", "Maximum volume.", "Mute.",
"Turn it up", "Turn it down"
For more information, visit the below web site.
yy Set up, Usage and more: http://support.google.
com/assistant/answer/7540703
yy Compatible LG appliance models:
Visit http://www.lg.com and then search the
information
7. Smart Home devices
"Set the heat to 70"
"Turn on lights in the kitchen"
"Watch on TV"
,,Note
For more information on the voice commands,
refer to the “Google Home” app screen or
visit the web site. http://support.google.com/
assistant
3
Operating
5. Music
"Play the music.", "Next song.", "Previous song.",
"Pause the music"
18 Operating
,,Note
yy After connecting to Wi-Fi, this function is
available to use. If Function LED (White)
blinks, the speaker is not connected to WiFi. Follow the “Installing “Google Home” App”
and try again. (page 10-13)
yy If the Google Assistant LED is solid amber,
the microphone is off. In that case, the Google
Assistant is not available to receive your
comment. Press the button on back of the
speaker.
3
yy If the Google Assistant fails to understand
your commands, it will say answers such
as "Sorry, I can't help with that yet","My
apologies. I don't understand."
Operating
yy Avoid noisy places, because the speaker may
not receive your commands or "Hey, Google".
Instead of "Hey Google", long press for 2
seconds.
yy When the voice recognition time limit is
exceeded on smart devices, this function
automatically cancels.
yy Speaking with correct pronunciation will
increase the voice recognition rate.
yy The Google Assistant may be slow to
recognize or act depending on the Wi-Fi
connection status or Google server status..
Operating 19
LG Wi-Fi Speaker
The "LG Wi-Fi Speaker"app is provided by LG
Electronics. This app allows you to use various
functions of this speaker through your smart device:
Requirements before using
You should connect to Wi-Fi by using "Google Home"
app prior to use this app. (Page 10-13)
,,Note
Through Apple "Google Play" or "App
Store"
1. Tap the “Google Play Store” icon or “App Store”
icon on your smart device.
2. Type in "LG Wi-Fi Speaker" in the search bar and
tap "Search".
3. Select "LG Wi-Fi Speaker" in the search result list
to download.
,,Note
Depending on the device, "LG Wi-Fi Speaker"
app may not work.
3
Enjoying music on your device and
home network server
Setting and controlling the speaker
Operating
"LG Wi-Fi Speaker" app will be available in the
following software versions: Android OS: Ver 5.0
(or later) iOS: Ver 10 (or later)
Installing "LG Wi-Fi Speaker"
App
You can listen to music on your smart device and
home network server.
You can manage the speaker settings and control the
speaker.
Using Chromecast built-in
You can enjoy music contents through this speaker.
,,Note
For more informations of "LG Wi-Fi Speaker",
follow the application instructions or see the
owner’s manual of "LG Wi-Fi Speaker".
20 Operating
BLUETOOTH connection lock
Sound effect
You can limit Bluetooth connection to only
Bluetooth function to prevent unintended Bluetooth
connection.
This system has a number of pre-set surround sound
fields. You can select a desired sound effect by using
"LG Wi-Fi Speaker" app.
1. Install the "LG Wi-Fi speaker" app.
Follow the "LG Wi-Fi Speaker" (page 19)
2. Follow these instructions in order.
[ ] [ [My Speakers] [ [ ] [ [Bluetooth
connection restriction]
3.Tap
on [Bluetooth connection restriction]
,,Note
3
Status
Function
on
yy When you turn off this function, tap
[Bluetooth connection restriction] again.
Enhanced Bass +
Clear Vocal
You can enjoy Clear
Vocal and Enhanced
Bass at the same
time.
Operating
You can enjoy Wide
sound field and rich
bass with emphasis
the bass and warmth
of the music.
-- [ ] [ [My Speakers] [ [ ] [
[Bluetooth connection restriction]
yy If a Bluetooth device has paired to the
speaker previously, you can connect the
Bluetooth device and the speaker.
Description
Enhanced Bass
-- Enhanced Bass is
more effective for
music with bass.
Yon can enjoy Highfidelity sound with
improved the vocal
clarity of every lyric.
Clear Vocal
-- Clear Vocal is more
effective for music
with vocal.
You can enjoy pure
and natural sound.
Standard
,,Note
yy When you turn the speaker back on, the last
used option will be on.
yy When you select ”Standard” “Enhanced Bass”,
“Clear Vocal” or “Clear Vocal + Enhanced
Bass” sound effect, you can enjoy premium
sound with MERIDIAN technology.
yy Because fine-tune sound to provide optimal
high-quality sound, It might be a little
difference between sound effect modes.
Operating 21
Using BLUETOOTH®
technology
About BLUETOOTH
Bluetooth is wireless communication technology for
short range connection.
The sound may be interrupted if the connection has
interference by some other electronic waves or you
connect the Bluetooth in some other room.
Pairing your unit and BLUETOOTH
device
Before you start the pairing procedure, make sure the
Bluetooth feature is turned on in to your Bluetooth
device. Refer to your Bluetooth device’s user guide.
Once a pairing operation is performed, it does not
need to be performed again.
1. Turn on the speaker and connect Wi-Fi. Follow
the "Setting up the Speaker". (page9-13)
3
Operating
Connecting individual devices under Bluetooth
wireless technology does not incur any charges.
A mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
Listening to music stored on the
BLUETOOTH devices
yy Available Devices: Smart phone, Notebook, etc.
yy Version: 4.2
yy Codec: SBC
BLUETOOTH Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
2. When you change to Bluetooth function by
pressing the F button, the Function LED's color
will change from white to blue.
-- Function LED (Blue) will blink.
A2DP (Advanced Audio Distribution Profile)
3. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device display
depending on the type of Bluetooth device. Your
unit appears as "Speaker name (App setup)".
22 Operating
4. Select "Speaker name (App setup)".
Speaker
name
,,Note
yy App setup means that you set the name in
the "Google Home" app. For example, if the
speaker name is set to Smart speaker in the
"Google Home" app, you will see “ Smart
speaker” on your Bluetooth device.
3
Operating
yy You may check and edit the speaker name on
"Google Home" app (Page 24)
yy Depending on the Bluetooth device type,
some device have a different pairing way.
Enter the PIN code (0000) as needed.
5. When this unit is successfully connected with
your Bluetooth device, the Function LED will be
solid blue with sound.
,,Note
yy When using Bluetooth technology, you
should be as close and possible when you are
attempting to make a connection between
the unit and a Bluetooth device. You should
also keep the distance close.
However you may experience issues in the
cases below:
-- There is an obstacle between the unit and
the Bluetooth device.
-- There is a device using same frequency
with Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
yy If Bluetooth connection does not work
well, go to step 1 of “Pairing your unit and
BLUETOOTH device” and try again.
yy The sound may be interrupted when the
connection has interference from some other
electronic waves.
yy Pairing is limited to one per unit and multipairing is not supported
yy Depending on the type of the device, you may
not be able to use the Bluetooth function.
yy You can enjoy Bluetooth function using
Smart phone, Notebook, etc..
yy The more distance between the unit and the
Bluetooth device, the lower the sound quality
becomes.
6. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
yy Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets too far from the unit.
yy When Bluetooth connection is disconnected,
connect the Bluetooth device to the unit
again.
yy When you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
yy When the unit is not connected, Function LED
(Blue) will blink.
Operating 23
,,Note
yy Bluetooth connection will be disconnected
when you change the Bluetooth function
to another function. When you switch to
Bluetooth function again, the speaker will
automatically reconnect the Bluetooth
device. Some Bluetooth devices may not be
connected in automatic.
yy Some of PC may not be automatically
connected to Bluetooth.
Other Operations
Turn off the microphone
temporarily
You can turn off the microphone to temporarily
disable the detect voice recognition by pressing
(Microphone off) button. All the Google Assistant
LED turns amber and "The mic is muted" is heard.
Using Voice command to connect
Bluetooth
To cancel it, press (Microphone off) again. the
Google Assistant LED turns off and "The mic is back
on" is heard.
If the speaker has paired to a Bluetooth device
before, you can use "Google Assistant" to pair
Bluetooth. Say "Connect", "Connect to Bluetooth" or
"Hey Bluetooth".
Auto function change
3
To disconnect it, say "Cancel", "Unpair devices" or
"Clear all devices".
This speaker recognizes input signals Wi-Fi,
Bluetooth and then changes suitable function
automatically.
Operating
Controls connected Bluetooth device
When Wi-Fi signal comes in
You can control connected Bluetooth device from
the unit; play, pause, skip, volume.
,,Note
yy Only Android OS and iOS is available to use
this function.
yy This function may not be supported
depending on the Bluetooth device or some
of TV operated differently.
yy You can control connected Bluetooth devices
by voice recognition. Follow the “How to use
Google Assistant" (Page 16-18).
When you use the Google Cast and voice command
this unit changes the function to Wi-Fi.
When you try to connect Bluetooth
device
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.
,,Note
If the Bluetooth connection lock function is set,
Bluetooth connection will be only available on
Bluetooth function. (Page 20)
24 Operating
Edit speaker name
You can check and edit the speaker name on the
"Google Home" app, follow these instructions.
3. The speaker has completed resetting when
Function LED blinks slowly with sound.
[ ] [ [ ] [ [Settings] [ [Device info] [
[Name]
Resetting
To initialize information of existing connection, follow
these instructions.
1. Press and hold the RESET button for 5 seconds.
The Function LED will be filled when RESET is
pressed.
3
Operating
2. When the speaker enters reset mode, Function
LED starts to rotate quickly with sound. Wait
until resetting is complete.
,,Note
It takes about 1 minute to reset the speaker.
,,Note
yy The first beep sound means that the speaker
entered reset mode. Please don't unplug the
power cord.
yy If you do not press and hold the RESET
button for more than 5 seconds, speaker is
not reset.
yy When you reset this speaker, it needs to
reconnect to Wi-Fi or Bluetooth.
Troubleshooting 25
Troubleshooting
General
Problem
Cause & Correction
No Power
yy The power cord is unplugged. Plug in the power cord.
yy Check whether electricity failed.
Check the condition by operating other electronic devices.
yy The unit or your smart device’s volume is set to minimum. Check and adjust the
volume of the speaker or your device’s volume.
No sound or sound
distortion.
yy When you use an external device at high volume, the sound quality may be
deteriorated. Lower the volume of the devices.
yy If you use the unit for purposes other than listening to music, the sound quality
may be lowered or the unit may not work properly.
Wi-Fi connection does
not work well.
yy Check your router. Try turning it off and back on.
yy Check that the Wi-Fi feature is turned on in your smart device.
yy Switch Bluetooth off and on again on your Bluetooth device, then try pairing
again.
Bluetooth pairing does
not work well.
yy Be sure your Bluetooth device is on.
yy Remove the obstacle in the path of the Bluetooth device and the unit.
yy Depending on the type of the Bluetooth device or surrounding environment,
your device may not be paired with the unit.
Voice recognition does
not work well.
yy The speaker may not be recognized because of the surrounding noise.
yy Instead of "Hey Google", long press for 2 seconds.
yy Check and make sure the microphone is not turned "off". Press the
button.
yy In case of malfunction, please use the unit in proper place where the
temperature or humidity is not so high or low.
The unit does not
operate normally.
yy When Function LED is blinking in red, unplug the power cord from the electrical
outlet and plug it again.
yy When Function LED is solid red, press the RESET button for 5 seconds. (Page
24)
The unit does not
connect with Bluetooth
device.
yy Turn off the Bluetooth connection lock function. (Page 20)
Above solutions do not
work.
yy Press the RESET button for 5 seconds. (Page 24)
4
Troubleshooting
yy Check that the speaker and your smart device are connected to same Wi-Fi.
26 Troubleshooting
Network
Symptoms
Cause & Solution
Cannot connect the
speaker to your home
network.
The wireless communication may be interrupted from household devices that are
using radio frequencies. Move the speaker away from them.
Media servers are not
displayed on the device
list.
yy The firewall or anti-virus software on your media server is running. Turn off
the firewall or anti-virus software running on your media server.
The application doesn’t
work properly.
Is the application plugged in?
yy Make sure that the speaker is connected to the same network that your
media server is connected.
yy Plug in the application.
Is the LAN cable connected to the wireless router and the application properly?
yy Connect the LAN cable to the LAN port on the back of the application and to
your wireless router.
If you restart the router?
yy You need to turn the speaker’s power off and on again.
If you install new router.
4
Troubleshooting
yy You need to perform a factory set and setup the network connection for
speaker.
Application
Symptoms
Cause & Solution
The application doesn’t
work properly.
Does an error occur when accessing the app?
yy Make sure that your smart device is compatible with the app.
yy Make sure that the application is the latest version.
yy Make sure that the speaker’s front LED turns from red to white.
Appendix 27
Trademarks and
Licenses
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally
packed at the factory.
The Bluetooth® word mark and logos are
registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by LG
Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide spray
near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner,
as these might damage the surface of the unit.
5
Appendix
28 Appendix
OPEN SOURCE
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
You can find “Open Source Software Notice” at
the"LG Wi-Fi Speaker" app or "Google Home" app
To obtain the source code under GPL, LGPL, MPL, and
other open source licenses, that is contained in this
product, please visit
LGE OPEN SOURCE
http://opensource.lge.com.
1. Launch "LG Wi-Fi Speaker" app on your smart
device.
2. Follow these instructions in order.
[ ] [ [ Settings]
3. Tap [Open source licenses] on [ Settings]
Shows LGE Open Source Software Notice.
Chromecast and the Google Assistant
OPEN SOURCE
1. Launch "LG Wi-Fi Speaker" app on your smart
device.
2. Follow these instructions in order.
[ ] [ [ Settings] [ [Chromecast] [
[Chromecast built-in open legal documents]
5
3. Tap [Open source licenses] on [Chromecast builtin open legal documents] Shows Chromecast and
Google Assistant Open Source Software Notice.
Appendix
Android Things OPEN SOURCE
1. Launch "Google Home" app on your smart device.
2. Follow these instructions in order.
[ ] [ [ ] [ [Settings] [ [ ]
3. Tap [Open source licenses] on [ of Device
settings] Shows Android Things Open Source
Software Notice.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices are
available for download. LG Electronics will also provide
open source code to you on CDROM for a charge
covering the cost of performing such distribution
(such as the cost of media, shipping and handling)
upon email request to [email protected]. This
offer is valid for a period of three years after our last
shipment of this product. This offer is valid to anyone
in receipt of this information.
For more information about Google's open source,
visit device settings of Google Home app.
Appendix 29
Specifications
Speaker
Power consumption
Refer to main label.
AC adapter
yy
yy
yy
yy
Dimensions (W x H x D)
Approx. 135 mm X 210.7 mm X 135 mm
(5.31 inch x 8.29 inch x 5.31 inch)
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
5 % to 60 %
Model: LCAP16B-A
Manufacturer: Lien Chang Electronic Enterprise Co., Ltd.
Input: 100-240 V~ 50-60 Hz 1.1 A
Output: 19 V 0 2.1 A
yy Design and specifications are subject to change without notice.
5
Appendix
OWNER’S MANUAL
LG
Wi-Fi Speaker
www.lg.com
Table of Contents
2
Table of Contents
1
Getting Started
3
3
”LG Wi-Fi Speaker”
– Installing “LG Wi-Fi Speaker” App
2Operating
4
Enjoying the Music with “LG Wi-Fi Speaker”
app
4
– Overview of the side menu
5
– Overview of [My Speakers]
5
– Playing a song
6
– Managing a song
7
– Overview of Playback
9Settings
9
– Settings of the connected speaker
11 – Settings of “LG Wi-Fi Speaker” app
1
2
3
Getting Started
”LG Wi-Fi Speaker”
1
Getting Started
The “LG Wi-Fi Speaker”app is provided by LG
Electronics. This app allows you to use various
functions of this speaker through your smart device:
Requirements before using
You should connect Wi-fi by using “Google Home”
app prior to use this app.
,,Note
"LG Wi-Fi Speaker" app will be available in
version of the software as follow; Android OS :
Ver 5.0 (or later) iOS : Ver 10 (or later)
Enjoying music on your device and
home network server
You can listen to the music on your smart device and
home network server.
Using Chromecast built-in
You can enjoy music contents through this speaker.
Installing “LG Wi-Fi Speaker”
App
Through Apple “App Store” or Google
“Play Store”
1. Tap the Apple “App Store” icon or Google “Play
Store” icon.
2. Type in “LG Wi-Fi Speaker” in the search bar and
tap “Search”.
3. Select “LG Wi-Fi Speaker” in the search result list
to download.
,,Note
Depending on the device, "LG Wi-Fi Speaker"
app may not work.
Setting and controlling the speaker
You can manage the speaker settings and control the
speaker.
Operating
Enjoying the Music with
“LG Wi-Fi Speaker” app
With “LG Wi-Fi Speaker” app, you can play music in
your smart device.
4
Overview of the side menu
1. Launch “LG Wi-Fi Speaker” app on your smart
device. [My Speakers] appears.
2. Tap [
] button.
,,Note
Some of the content in this part may differ
from “LG Wi-Fi Speaker” app depending on the
application’s version.
2
Operating
3. Side menu appears.
a
[My Speakers] – Displays the connected
speaker.
b
[My Phone] – Displays the songs on this smart
device.
c
[Music Server] – Displays the songs on the
connected devices (Media server).
d [Playlist] – Displays the playlists.
e [Settings] – Displays the application settings.
,,Note
It may request permission to use music.
5
Operating
Overview of [My Speakers]
Playing a song
1. Select [My Phone] or [Music Server] on the side
menu.
2
Operating
a [ ] – Connect additional speakers.
b
[ ] – Selects a function of the connected
speaker.
2. You can see songs on your smart device or music
server. Select a song to play.
c
[ ] – Set up the connected speaker settings.
(Page 9)
d
[ ] – Adjust volume level of the connected
speaker.
In [My Phone] menu, the songs are sorted by
[Album], [Artists], [Songs], [Genres] and [Folders]
(Android device) or [iPhone Playlist] (iOS device).
In [Music Server] menu, the connected servers
appear.
[Status] – Shows state of the connected
e
speaker.
3. Tap [ ] and select the speaker. You can listen to
music through the connected speaker with
Chromecast.
Operating
Managing a song
Using Playlist
On the song list of [My Phone] or [Music Server], tap
[ ] of the desired song.
The pull down menu appears.
You can enjoy music to suit your taste by making
Playlist.
6
1. On the song list of [My Phone] or [Music Server],
tap [ ] of the desired song and [Add to playlist].
2
Operating
a [Play next] – Selects music to play next.
2. [Add to playlist] window appears.
b [Add to queue] – Adds to queue list.
c [Add to playlist] – Adds to a desired playlist.
,,Note
Depending on your wireless environment, playing
a song with the speaker may not work smoothly.
-- Select a playlist to add the song.
-- If you want to make another playlist, select
[Make a new].
Operating
7
Overview of Playback
Selecting Sound effect
You can confirm and adjust various information on
the playback screen.
The app provides 4 sound effects (Clear
Vocal+Enhanced Bass, Clear Vocal, Enhanced Bass or
Standard). You can select a desired sound mode by
tapping [ ].
The displayed items for the equalizer may be different
depending on the connected speaker, sound sources
and effects.
1. During playback, tap [ ].
2
Operating
a
[ / ] - Cast music to the connected speaker
by Chromecast and stop casting the music.
b [ ] - Edits the current playlist.
c
[ ] - Adjusts the volume of smart device or the
volume of Chromecast.
2. Select sound effect using Enhanced Bass and
Clear Vocal and tap [OK].
d [ ] - Adjusts the sound effect.
Adjusts playback.
[ ] - Pauses playback.
[ ] - Starts playback.
[ ]/[ ] - Skips fast backward or forward.
e [ ] - Repeats the desired contents.
Every time you click it, the state changed in [ ]
(Repeat One) - [ ] (Repeat All) - [ ] (Repeat
Off) order.
[ ] - Shuffles the music on the list. Music will
be played in random order.
Displays information about the currently playing
f
song.
,,Note
[ ] is not available when you listen to music by
your smart device or listen to music from
speakers grouped with the Google [Home] app.
You can customize the sound effect by using [ ]
to adjust Treble and Bass value.
,,Note
yy When you listen to music via [My Phone]
without speaker, the sound effect is not
supported.
yy Depending on the connected speaker,
displayed sound effect may differ.
Operating
,,Note
Sound effect mode
This system has a number of pre-set surround sound
fields. You can select a desired sound effect by using
“LG Wi-Fi Speaker” app.
Status
Function
Description
You can enjoy Clear
Vocal and Enhanced
Bass at the same
time.
You can enjoy Wide
sound field and rich
bass with emphasis
the bass and warmth
of the music.
Enhanced Bass
Enhanced Bass is
more effective for
music with bass.
Yon can enjoy Highfidelity sound with
improved the vocal
clarity of every lyric.
Clear Vocal
Clear Vocal is more
effective for music
with vocal.
You can enjoy pure
and natural sound.
Standard
yy When you turn the speaker back on, the last
used option will be on.
yy When you select ”Standard” “Enhanced Bass”,
“Clear Vocal” or “Clear Vocal + Enhanced
Bass” sound effect, you can enjoy premium
sound with MERIDIAN technology.
yy Because fine-tune sound to provide optimal
high-quality sound, It might be a little
difference between sound effect modes.
2
Operating
Enhanced Bass +
Clear Vocal
8
9
Operating
Settings
Settings of the connected
speaker
With “LG Wi-Fi Speaker” app, you can set the
connected speaker in your smart device.
You can set up setting of the connected speaker.
,,Note
2
On [My Speakers] screen, select [ ] to set up the
connected speaker settings.
Some of the content in this part may differ
from “LG Wi-Fi Speaker” app depending on the
application’s version.
Operating
,,Note
You cannot see some menu depending on the
connected device.
Operating 10
Settings of the connected speaker appear.
[Sound Effect] - Selects a sound effect mode
a (Clear Vocal+Enhanced Bass, Clear Vocal,
Enhanced Bass or Standard). (Page 8)
[Bluetooth connection restriction] –
b It enables you to connect Bluetooth device only
on Bluetooth.
[Reset settings] – Resets the speaker settings
c (Volume, Sound effect, Function, Bluetooth
setting).
e [IP Info.] - Shows the IP address of the speaker.
2
Operating
[Software version information] – Displays
d the current Software version information and
updates the software to latest version.
11 Operating
Settings of “LG Wi-Fi Speaker”
app
[Chromecast] Menu
Select [Settings] on the side menu.
2
Operating
a
Settings of “LG Wi-Fi Speaker” app appear.
[Learn how to cast] - Shows how to use
Chromecast.
[Cast Groups] - Select [Learn about Cast
b Groups] or [How to cast to a group] to show
the selected information.
[Chromecast built-in open legal documents]
- Select [Google Terms of Service], [Google
c
Privacy Policy] or [Open source licenses] to
show the selected information.
d [Time zone] - Sets time zone.
,,Note
To use Cast Groups, install Google [Home]
application. Download the application from
Apple “App Store” or Google “Play Store”.
a
[Participate in user enhancement] – Allows to
send user logs for service quality enhancement.
b [Chromecast] – Displays the Chromecast menu.
c
[App version information] – Displays this
application version information.
d [Terms of Service] – Displays Terms of Service.
[Open source licenses] – Shows LGE Open
e
Source Software Notice.
[Time Zone] Menu
Automatic Time zone
It offers to use network provided time.
Set Time Zone
If you deselect [Automatic Time zone], you can select
your time zone yourself.