Owner's Manual LG CineBeam DLP Projector Please read the safety information carefully before using this product. PF1000UG www.lg.com P/NO : SAC37034655 (1806-REV05) Copyright © 2018 LG Electronics Inc. All Rights Reserved. 2 Licenses Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video. To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the DivX VOD section of your device setup menu. DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license. Covered by DivX Patents 7,295,673; 7,515,710; RE45,052; and others available at [www.divx.com/patents] The terms HDMI and HDMI HighDefinition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ￼ NOTE • Image shown may differ from your projector. • Your projector’s OSD (On Screen Display) may differ slightly from that shown in this manual. 3 Safety precautions Please take note of the safety instructions to prevent any potential accident or misuse of the projector. • Safety precautions are given in two forms, i.e., WARNING and CAUTION as detailed below. WARNING Failure to follow the instructions may cause serious injury and even death. CAUTION Failure to follow the instructions may cause personal injury or product damage. • Read the owner's manual carefully and keep it on hand. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION -- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Indoor Installation WARNING • Do not use the projector outside and do not expose the product to any humidity or water. --Since the product is not waterproof, this may result in a fire or electric shock. • Do not place the projector in direct sunlight or near heat sources such as radiators, fires, stoves, etc. --This may result in fire. • Do not place flammable materials such as aerosols near the projector. --This may result in fire. 4 • Do not allow children to cling to or climb up to the projector. -- This may cause the projector to fall, causing injury or death. • Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a closet) or on a carpet or cushion. --This may result in fire due to the increase in internal temperature. • Do not place the product close to sources of steam, oil, or oil mist, such as humidifiers and kitchen counters. --Failure to do so may result in fire, electric shock, or corrosion. • Do not install the product onto a wall or ceiling that is close to sources of oil or oil mist. --The product may be damaged and fall, resulting in serious injury. • Do not place the projector where it might be exposed to dust. --This may result in fire. • Do not use the projector in a damp place such as a bathroom where it is likely to get wet. --This may result in fire or electric shock. • Do not allow a tablecloth or curtain to block the air vent. --This may result in fire due to the increase in the internal temperature. • Ensure good ventilation around the projector. The distance between the projector and the wall should be at least 30 cm. --This will prevent fire due to the increase in the internal temperature. CAUTION • When placing the projector on a table or shelf, be careful not to put it near the edge. --The projector could fall due to balance problems, which may cause personal injury or damage to the product. Make sure to use the projector cabinet or stand that fits the projector. • When moving the projector, make sure to switch it off and remove the power plug and cords. --The power cord may be damaged, resulting in fire or electric shock. • Do not place the projector on an unstable or vibrating surface such as a wobbly shelf or a slope. --It may fall and cause injury. 5 • Be careful not to tip the projector over when connecting external devices to the projector. --This may cause personal injury or damage to the projector. Power WARNING • DISCONNECTING THE DEVICE FROM THE MAIN POWER --The Power plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible. • The grounding wire should be connected. (Except for devices which are not grounded.) --Ensure that you connect the grounding cable to avoid electric shock. If it is not possible to ground the unit, have a qualified electrician install a separate circuit breaker. Do not try to ground the projector by connecting it to telephone wires, lightning rods, or gas pipes. • The power plug should be inserted fully into the power outlet. --An unstable connection may cause a fire. • Do not place heavy objects on the power cord. --This may result in fire or electric shock. • Never touch the power plug with wet hands. --This may result in electric shock. • Do not plug too many devices into one multi-power outlet. --This may result in fire due to the power outlet overheating. • Prevent dust from collecting on the power plug pins or outlet. --This may result in fire. • To turn off the main power, remove the power plug, which should be positioned so it is easy to access for operation. CAUTION • Hold the plug firmly when unplugging. --A damaged wire may create a fire hazard. • Ensure the power cord and plug are not damaged, modified, severely bent, twisted, pulled, sandwiched, or hot. Do not use the product if the power outlet is loose. --This may result in fire or electric shock. 6 • Keep the power cord away from heating devices. --The wire's sheath may melt, which may result in fire or electric shock. • Place the projector where people will not trip over or step on the power cord to protect the power cord and plug from any damage. --This may result in fire or electric shock. • Do not turn the projector on or off by plugging in the power plug or unplugging it from the power outlet. (Do not use the power plug as a switch.) --This may result in electric shock or damage to the product. • Do not insert a conductor into the other side of the wall outlet while the power plug is inserted into the wall outlet. In addition, do not touch the power plug immediately after it is disconnected from the wall outlet. --This may result in electric shock. • Only use the official power cord provided by LG Electronics. Do not use other power cords. --This may result in fire or electric shock. When in Use WARNING • Do not place anything containing liquid on top of the projector such as a vase, flower pot, cup, cosmetics, or medicine; or ornaments, candles, etc. --This may result in fire or electric shock, or cause injury due to falling. • In the event that there is a heavy impact or the cabinet is damaged, switch it off, unplug it from the power outlet and contact an authorized service center. --This may result in electric shock. • Do not insert pieces of metal such as coins, hairpins, or metal debris, nor flammable materials such as paper or matches into the projector. --This is to prevent electric shock or fire. • In the event that liquid or a foreign object falls into the projector, switch it off and unplug it from the power outlet and contact our service center. --This may result in fire or electric shock. 7 • Make sure that a child does not swallow the batteries when you replace the old remote control batteries with new ones. Keep batteries out of reach of children. --If a child swallows a battery, consult a doctor immediately. • Never open any cover on the projector. --There is a high risk of electric shock. • Do not look directly into the lens when the projector is in use. --The bright light may damage your eyes. • When the lamp is on or has just been turned off, avoid touching the air vent or lamp, because these will be very hot. • If there is a gas leak in the room with the projector, do not touch the projector or power outlet. Open the windows for ventilation. --Sparks may cause fire or burns. • Unplug the power cord from the outlet during a lightning storm. --This will prevent shock or damage to the projector. • Do not use the projector near electronic devices that generate a strong magnetic field. • Do not put the plastic package used to pack the projector around your head. --This may cause suffocation. • Do not keep your hand on the projector for a long time when it is running. • When you play a game by connecting a game console to a projector, it is recommended that you maintain a distance of more than four times the diagonal length of the screen. --Make sure that the connecting cable is long enough. Otherwise, the product may fall causing personal injury or damage to the product. • Do not place the projector or its remote control with battery in an extremely high temperature environment. --This may result in fire. • Do not use 3D glasses if you do not watch 3D. CAUTION • Do not place heavy objects on the projector. --It may fall down and cause personal injury. • Be careful not to allow any impact to the lens during transport. • Do not touch the lens of the projector. --The lens may be damaged. 8 • Do not use any sharp tools on the projector such as a knife or hammer, because this may damage the casing. • In the event that no image appears on the screen or no sound is heard, stop using the projector. Switch off the projector, unplug it from the power outlet and contact our service center. --This may result in fire or electric shock. • Do not drop anything onto the projector or allow anything to bang into the projector. --This may cause damage to the projector or personal injury. • It is recommended that you maintain a distance of at least 5-7 times the diagonal length of the screen. --If you watch the screen at a close distance for a long time, you may suffer from eyestrain. • Do not block the light beam emitted from the projector using a book or other object. --Lengthy exposure to the projector beam may result in fire. In addition, the lens may be overheated and damaged by the reflected heat. Disable the AV function to stop projection temporarily or turn off the power. • Do not start the projector with the volume turned up high. --High volume may damage hearing. • Do not use high voltage electrical equipment near the projector, (e.g., a bug zapper). This may result in product malfunction. 9 Cleaning WARNING • Do not spray the projector with water when cleaning. Make sure water does not flow into the projector. --This may result in fire or electric shock. • When there is smoke or a strange smell coming out from the projector or a foreign object falls into the projector, please switch it off and unplug it from the power outlet and contact our service center. --Otherwise, this may result in fire or electric shock. • Use air spray, a soft cloth, or a cotton swab moistened with a lens cleaning chemical or alcohol to remove dust or stains on the front projection lens. CAUTION • Contact your seller or our service center once a year to clean the internal parts of the projector. -- If you do not clean the projector for a long period of time, dust will accumulate, which may result in fire or damage to the projector. • When cleaning plastic parts such as the projector case, unplug the power first and wipe with a soft cloth. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, automobile or industrial shiner, abrasives, wax, benzene, or alcohol as these can damage the projector. -- This can result in fire, electric shock or cause damage to the product (deformation and corrosion). • Do not wipe the optical system (lens, mirror) right after the product has been turned off or while the product is being operated. When cleaning each part of the product, remove the power cord and wipe gently with a soft cloth. Do not spray with water or wipe with a wet cloth. Do not use detergents, automobile or industrial polish, abrasive substances, wax, benzene, alcohol, water, etc. on the product's main unit or optical system (lens, mirror) as this may damage the product. -- This can result in fire, electric shock or cause damage to the product (deformation and corrosion). • Remove the plug from the outlet before cleaning the product. -- Otherwise, this may result in electric shock. 10 Others WARNING • Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular patterns from a video game. • When you go out, place the projector out of reach of animals, and remove the power plug from the wall outlet. --Using a damaged power cord may result in short circuit or fire. • Do not use the projector near high precision electronic devices or those that transmit weak radio signals. --This may affect the operation of the product, causing an accident. • Only a qualified technician can disassemble or modify the projector. For diagnosis, adjustment, or repair, contact your seller or our service center. --This may result in fire or electric shock. • Do not stare directly into lens when in operation, eye damage can occur. • No user serviceable parts inside unit. High voltage parts can cause shock and even electrocution. • Proper ventilation required, do not block airflow around unit. Doing so can cause injury and internal overheating. • Do not touch the lens; doing so can result in burns or damage to lens. Lens and unit may be HOT during and immediately after use. Use caution when handling unit, allowing for proper cool down. • Only use a grounded electrical outlet. • Do not insert anything into or cover up the exhaust vents. --This may result in fire or electric shock. • Follow all maintenance guidelines for optimal use; service only at an authorized service center. 11 CAUTION • Do not mix new batteries with old ones. -- Burst or leaking batteries may result in damage or injury. • Be sure to unplug if the projector is not to be used for a long period. -- Accumulated dust may result in fire or electric shock due to overheating, ignition, or poor insulation. • Only use the specified type of battery. -- Burst or leaking batteries may result in damage or injury. • Dispose of used batteries properly. -- This may result in explosion or fire. The correct method of disposal may vary depending on your country or region. Dispose of the battery pack as instructed. • Do not throw or disassemble the battery. -- This may result in fire or explosion due to damage to the battery. • Store batteries away from metallic objects, such as keys and paper clips. -- Excess current may cause a rapid increase in temperature, resulting in fire or burns. • Do not store the batteries near any heat source, such as a heater. -- This may result in fire or damage to the product. • Do not store batteries at temperatures higher than 60 °C or in high humidity. -- This may result in explosion or fire. • Keep the batteries and remote out of reach of children. -- This will prevent personal injury or damage to the product. • Make sure that the battery is installed correctly. -- This may prevent explosion or fire. • Make sure you use the same type of batteries for replacement. • Incorrect battery replacement may cause fire. ￼￼￼￼￼￼ Risk Group 2 CAUTION Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. May be harmful to the eye. 12 CONTENTS Licenses 2 Safety precautions 3 Preparation 14 Accessories 14 Optional extras 15 Parts and components 16 --Main unit 16 --Side17 --Back18 Using the joystick button --Basic functions --Adjusting the menu 19 19 20 Projector status indicators 20 Installation 21 --Installation precautions 21 --Projection distance per screen size 22 --Kensington security system 23 Remote control 24 Using the projector 27 Watching projector 27 --Turning on the projector 27 --Focus and position of the screen image 28 --Watching with the projector 29 Additional options 30 --Adjusting aspect ratio 30 --Using the edge adj (4 corner keystone) function 31 --Changing input device 32 --Blank function 33 Using the quick menu 34 Entertainment 35 Using SCREEN SHARE 35 Setting up bluetooth on the projector 36 --Searching for bluetooth devices and connecting 37 --Connecting, disconnecting, or deleting bluetooth devices in the list of registered devices38 --Adjusting AV Sync. Adjust 39 13 MY MEDIA 40 Before using 40 --Connecting a USB Device40 --Removing a USB Device 40 To use my media --Watching the videos --Viewing the photos --Listening to music --Viewing files 42 45 51 55 58 3D function 62 While watching 3D 62 Connecting devices 85 Connecting to HD receiver, DVD, or VCR player, external devices 86 --HDMI Connection 86 --HDMI to DVI Connection 86 --AV connection 87 --Component connection 87 Connecting a PC --HDMI connection --HDMI to DVI connection --RGB connection 88 88 89 90 Requirements for watching 3D images 65 --Using the DLP-LINK (DLPReady) type glasses 66 Connecting a laptop --HDMI connection 91 91 Connecting headphones 92 To view 3D images --Supported 3D mode 66 67 Connecting a digital amp 92 Customizing settings 69 Using the mirroring function of a mobile phone 94 --MHL connection 94 SETTINGS 69 Maintenance PICTURE settings 70 95 AUDIO settings 76 TIME settings 80 WIRELESS settings 81 Cleaning 95 --Cleaning the lens 95 --Cleaning the projector case 95 OPTION 1 settings 82 OPTION 2 settings 83 Specifications SYMBOLS 96 100 14 Preparation The pictures may differ slightly from the actual product. Accessories Accessories included with the projector are show below. Accessories are subject to change without prior notice. New accessories may be added or old ones removed. L/R SOUND BLANK + 3D SETTINGS HELP PJT Mode Remote Control Two AAA Batteries Owner's Manual Power cord AC-DC Adaptor + Composite Gender Depending on country • When connecting an HDMI or USB cable, or connecting a USB flash drive to the HDMI or USB port, use a product that has a width of 18 mm or less and a height of 10 mm or less. If the USB cable or USB flash drive does not fit the USB ports of the projector, use an extension cable that supports USB 2.0. • Use a certified cable with the HDMI logo attached. • If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. (Recommended HDMI cable types) --High-Speed HDMI®/™ Cable --High-Speed HDMI®/™ Cable with Ethernet 15 Optional extras To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where you purchased the product. Optional accessories are subject to change without prior notice. Projection Screen HDMI Cable Video Cable Audio Cable Computer Cable Optical Cable MHL Cable 3D glasses (DLP-LINK or DLP Ready Type) LG Audio Device Component Gender 16 Parts and components This projector is manufactured using high-precision technology. You may, however, see tiny black dots and/or bright colored dots (red, blue, or green) that continuously appear on the projector screen. This is a normal result of the manufacturing process and does not indicate a malfunction. Main unit Joystick Button Mirror2) Vent1) Speaker Vent1) Focus Ring Speaker Lens2) Vent1) IR Reciver Bottom of the Projector Adjustable leg3) 1)Due to the high temperature of vent area, do not get close to the vent area. 2)Do not touch the Lens and Mirror when using the projector. The Lens and Mirror may be damaged. 3)Turn the adjustable leg left or right to adjust the angle. 17 Side 1 No. 1 5 Description Port Port Port 4 5 (USB port) 6 Port 7 4 (Headphone Port) 2 3 2 3 Port 6 7 18 Back 1 No. Description Port 1 2 2 Port 19 Using the joystick button You can operate the projector by pressing the button or moving the joystick left, right, up, or down. Basic functions Power On When the projector is turned off, place your finger on the joystick button, press it once, and release it. Power Off When the projector is turned on, place your finger on the joystick button, press it once for a few seconds, and release it. (However, if the menu button is on the screen, pressing and holding the joystick button will let you exit the menu.) Volume Control Place your finger over the joystick button and move it left or right. You can adjust the volume level. Up/Down/ Left/Right If you move the joystick up, down, left, or right, you can move the cursor to select the menu items. NOTE • Move the joystick button up, down, left, or right. Be careful not to press the joystick button. If you press the button while moving the joystick, the volume control may not work, and the cursor may not move. 20 Adjusting the menu when the projector is turned on, press the joystick button one time. You can adjust the menu items ( , , , ) moving the joystick button left, right, up, or down. Move to the desired menu item, and then press the joystick button once to select it. Close Projector off Turns the power off. Input List Changes the input source. Close Clears on-screen displays and returns to projector viewing. Settings Displays the Settings menu. Projector status indicators LED Power Indicator LED Power Indicator LED Power Indicator Red Power standby state Off The projector is operating with the power on. 21 Installation Installation precautions • Place the projector in a wellventilated environment. --To prevent internal overheating, install the projector in a well-ventilated place. Do not place anything near the projector that may block its air vents. If the air vents are blocked, the internal temperature of the projector will increase. --Do not place the projector on a carpet or rug. If the projector's inlet vent is on the bottom, be careful not to block the vent and always use the projector on a solid, level surface. --Be sure to prevent foreign objects such as paper debris from entering the projector. --Leave an adequate open area (30 cm or more) around the projector. • Do not place the projector in a hot, cool, or humid environment. • Do not place the projector in a place where it will easily attract dust. --This may result in fire. • Never open any cover on the projector. There is a high risk of electric shock. • The projector is manufactured using high-precision technology. You may, however, see tiny black dots and/or bright colored dots (red, blue or green) that continuously appear on the projector screen. This is a normal result of the manufacturing process and does not indicate a malfunction. • The remote control may not work in an environment where a lamp equipped with electronic ballasts or a three-wavelength fluorescent lamp is installed. Replace the lamp with an international standard lamp for the remote control to work normally. • To install to the ceiling, attach the ceiling-type bracket to the projector with M4 x 8 mm screws. 22 Projection distance per screen size 1 Place the projector on a sturdy, level surface, together with the PC or audio/video source. 2 Place the projector an appropriate distance away from the screen. The distance between the projector and the screen determines the actual size of the image. 3 Position the projector so that the lens is at a right angle to the screen. If the projector is not at a right angle, the projected image will look distorted. To correct the distortion, use the keystone function. (See page 31.) 4 Connect the power cord of the projector and the connected device to the wall outlet. Ratio of upward projection: 125 % X Screen Y C ￼￼￼ D C B D A Screen Size (mm) 1524 1778 2032 2286 2540 Horizontal Size (X) x Vertical Size (Y) (mm) A (mm) B (mm) C (mm) D (mm) 1328 x 747 414 105 149 241 1550 x 872 482 173 181 273 1771 x 996 550 241 213 304 1992 x 1121 618 309 245 336 2214 x 1245 686 377 276 368 The projection distance may vary depending on the installation conditions. CAUTION • If the projected image looks distorted or bent, check to see if the screen is installed properly. 23 Kensington security system • This projector has a Kensington Security Standard connector as an anti-theft mechanism. Connect a Kensington Security System cable as shown below. • For more information on installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. • The Kensington Security System is an optional accessory. • What is Kensington? Kensington is a company that provides safety systems for laptops and other electronic devices. Website: http://www.kensington.com 24 Remote control Open the battery cover on the back of the remote control and insert the batteries which are specified in the battery room with poles pointing in the correct direction. The new and same type of batteries (1.5 V AAA) must be used. CAUTION • Do not mix new batteries with old ones. (POWER) Turns the projector on or off. / L/R Accesses USB mode. Changes the input source. SOUND BLANK Playback Control Buttons Controls playback of MY MEDIA. Switches left and right in 3D mode. 3D Adjusts the Edge Adj settings. SETTINGS Changes the Sound Mode. Sets the sleep timer. Changes the picture mode. HELP PJT Mode Reduces power consumption by adjusting peak screen brightness. Displays a blank screen. 25 Adjusts the volume level. L/R , Moves to the previous/next page. SOUND BLANK Resizes an image. Shows 3D images. 3D Mutes the sound of the projector. SETTINGS Displays or closes the Settings menu. Freezes the moving image. (Available in any mode other than USB mode.) Enters the quick menu. HELP PJT Mode / / / buttons Sets the function or moves the cursor. Shows the current mode and saves changes to the settings. (BACK) Returns to the previous screen. Optimizes the screen automatically in RGB-PC input mode. Exits the menu. Color buttons Sets detailed settings or gesture for each menu. Enables the self-diagnosis. Turns the projected image upside down or flips it horizontally. 26 NOTE SO • When using the remote control, the optimal operation range is 6 meters or less (left/right) and within a 30 degree arc of the remote control IR receiver. • If a cable is connected to the back port, the optimal operating range is 3 meters or less (left/right) and within a 30 degree arc of the remote control IR receiver. • For seamless operation, do not block the IR receiver. • When you carry the remote control in the portable bag, make sure that the buttons on the remote control are not pressed by the projector, cables, documents, or any other accessories in the bag. Otherwise, it may significantly reduce the battery life. L/R D UN BL K AN 3D LP HE PJT de Mo 27 Using the projector Watching projector Turning on the projector The menu screen display in this owner's manual is an example to help users understand how to operate the product and may look different from the actual screen. 1 Connect the power cord correctly. 2 After waiting for a moment, press the (POWER) button on the remote control or the joystick button. 3 In the Language Selection screen, select a language. 4 In the Mode Setting screen, select the setting mode you want. Mode Setting Selecting the environment. Choose the setting mode you want. Select [Standard] to use this Projector at home. To use this Projector at store, select [Store Demo]. Standard Store Demo Demo Mode Off Previous Confirm *S tore Demo is used when displaying the product in-store. The picture mode is automatically reset after a certain period of time. You can select Standard to use the product at home. 5 Select an input signal by using the control. button on the remote 28 Focus and position of the screen image When an image appears on the screen, check if it is in focus and fits the screen properly. Focus Ring • To adjust the focus of the image, rotate the focus ring. • Make sure the product does not move when adjusting the focus. 29 Watching with the projector 1 When in standby mode, press the projector on. (POWER) button to turn the 2 Press the button and select the input signal you want. 3 Control the projector using the following buttons while watching projector. Button Description Adjusts the volume level. Mutes all sounds. Accesses the quick menu. Resizes an image. Adjusts the Edge Adj settings. 4 To turn the projector off, press the (POWER) button. 30 Additional options Adjusting aspect ratio Resize an image to view at its optimal size by pressing are using the projector. while you NOTE • Available picture size may differ depending on the input signal. • You can also use the or button. Menu Description 16:9 Resizes images to the 16:9 ratio. Just Scan Displays video images in the original size without removing parts of the edge of the image. • If you select Just Scan, you may see image noise at the edge or edges of the screen. Set By Program Displays images in the same aspect ratio as the original image. 4:3 Resizes images to the previous standard 4:3. Zoom Resizes the image to fit the screen width. The top and bottom parts of the image may be cut off. • Press the or button to zoom in or out of the image. • Press the or button to move the image. Cinema Zoom 1 Formats an image to the cinemascope ratio, 2.35:1. It ranges from 1 to 16. • Press the or button to zoom in or out of the image. • Press the or button to move the image. • If you enlarge or reduce an image, the image may be distorted. 31 Using the edge adj (4 corner keystone) function Edge Adj (4 Corner Keystone) adjusts the horizontal and vertical sides of the projected image if the projector is at an angle and not perpendicular to the screen. This feature ensures the shape of the projected image is not distorted. Use this feature only when the projector cannot be set up at the optimal angle. Edge Adj may result in a loss of image quality. Edge Adj ꔂ Move Prev. Top Left Top Right Bottom Left Bottom Right Reset Test Pattern 1 Press the button. 2 The value range of Edge Adj is as follows. --Top Left (H: 0 to 100, V: 0 to 100) --Top Right (H: -100 to 0, V: 0 to 100) --Bottom Left (H: 0 to 100, V: -100 to 0) --Bottom Right (H: -100 to 0, V:-100 to 0) NOTE •When using Auto Keystone(Vertical), the current value set for Edge Adj is changed to the value that has been set with Auto Keystone(Vertical). •When the input is set to SCREEN SHARE, Edge Adj feature is disabled and cannot be used. 32 Changing input device To select an external input Selects external input. The illustration of the menu may differ from the actual screen on the product. • Press the button on the remote control to display the input selection screen. --Connected inputs are displayed first. However, SCREEN SHARE and AV input is always activated. • Select an input signal using the remote control's button to connect the projector to the desired input. You can use the , , , or button to switch between all the input modes. Input List AV SCREEN SHARE ꔂ Move ꔉ OK USB Component RGB-PC HDMI1 HDMI2 ￼ Input Label Exit 33 Selecting an Input Label Displays which devices are connected to which input ports. Input Label AV Component RGB-PC HDMI1 HDMI2 Close 1 Press the selection screen. 2 Press the 3 Use the 4 Use the button on the remote control to display the input button. or button to scroll to one of the input sources. or button to select one of the input labels. Blank function Using the Blank Function This function may be effective when you need to draw attention during a meeting or training. 1 Press the button, and the screen is covered by the background color. You can change the background color by referring to Selecting a Blank Image. 2 Press any button to clear the blank function. To cover the screen temporarily, press the button on the remote control. Do not block the lens with any object while the projector is running. It may become overheated and deformed or even cause a fire. 34 Selecting a Blank Image 1 Press the 2 Press the button. , button. 3 Press the button. , or buttons to select OPTION 2 and press the buttons to select Blank Image and press the , 4 Press the or and press the button to move to the setting or option you want button. Using the quick menu You can easily customize your frequently used menus. 1 Press the 2 Press the button. or button to select a menu and press Menu button. Description Aspect Ratio Resizes the picture. PJT Mode Turns the projected image upside down or flips it horizontally. Picture Mode Changes the picture mode. Sound Mode Sets the sound mode. Sleep Timer Sets the projector to be turned off at the specified time. Clear Voice II Makes the voice from the projector crisp and clear. Energy Saving Reduces power consumption by adjusting peak screen brightness. USB Device Allows you to remove a connected USB device in a safe manner. (The menu is displayed only when the USB device is connected.) 3 Press the or button to scroll through the following menus. 35 Entertainment Using SCREEN SHARE 1 Set the external input of the projector to SCREEN SHARE. 2 Enable related SCREEN SHARE function on the device you wish to connect. 3 Connect the projector from the search list on the device you wish to connect. (When you connect the projector to your laptop, input the PIN code shown on your display. The request for a PIN will be shown only at the initial connection.) 4 If the desired device accepts the request, SCREEN SHARE will be started. CAUTION • Windows 7 / 8 / 8.1 / 10 are compatible with SCREEN SHARE. However, other versions of Windows, and some other operating systems, may not be compatible with SCREEN SHARE. • Ice Cream Sandwich, Jellybean, KitKat, Lollypop, and Marshmallow versions of LG’s Android devices are guaranteed to be compatible. • When connecting via SCREEN SHARE, place the device close to the projector. • The response rate and image quality may vary depending upon the user’s environment. • For more information on the device you want to connect to, refer to its owner’s manual. • Certain Windows 8.1 laptops may have difficulty in reconnecting when initializing the device information during a wireless connection. In this case, it is recommended that you remove the registered device and reconnect. • When the input is set to SCREEN SHARE, these features are disabled and cannot be used: Edge Adj, PJT Mode, and Auto Keystone(Vertical). 36 Setting up bluetooth on the projector This option is used to output sound from the projector through Bluetooth audio devices. NOTE •The devices that can be connected are as follows: LG BTS1, LG HBS-700 , LG HBS- 730 , LG HBS-800 (Models available for purchase may vary by region.) •Products from other manufacturers may not be compatible. •You can use the remote control to adjust the volume of the connected device. •When connecting devices wirelessly,if the device connection fails, check that the device is connected to a power supply and also check that the Bluetooth audio device is operating properly. •If Bluetooth is turned on, the projector will automatically connect to the last connected Bluetooth device when the projector powers on. (Be sure to check that the last connected Bluetooth device is powered on as well.) •This projector does not support the LG TV Sound Sync feature. To use products that support the LG TV Sound Sync feature, use the general Bluetooth mode instead of the LG TV mode. •The Bluetooth function is to connect the product to Bluetooth speakers or Bluetooth headset. You cannot connect the product to a mobile phone through the Bluetooth function. 37 Searching for bluetooth devices and connecting Go to → AUDIO → Sound Out → Bluetooth → Search Device to search for nearby Bluetooth audio devices and then connect any detected devices to the projector. (If the device name is longer than 20 characters, only the first 20 will be displayed.) 1 Set the Bluetooth device to pairing mode and then select Search Device. • Select Stop searching to view the devices detected so far. • If the device has not been detected, check that the device is powered on and in pairing mode. • The time it takes to search for devices may vary according to the signal strength and the number of devices. AUDIO •• Sound Mode ꔂ Move ꔉ OK : Standard •• Sound Effect •• Auto Volume : Off •• Sound Out • : Bluetooth :Bluetooth •• AV Sync. Adjust : Off 2 When the search is complete, you can select a Bluetooth device and connect to it. • You can stop the connection process immediately by selecting Stop searching. • The time it takes to connect to a device may vary according to the signal strength and the number of devices. Search Device List Search Device Searching... Please wait. List Search complete HBS-700 Press OK(ꔉ) to connect the device. Stop searching Close Re-search Close 38 3 When a Bluetooth device is connected, you will hear sound from the projector through the connected device. • The connected Bluetooth device will be added automatically to the List of registered devices. Once registered, Bluetooth devices can be connected simply by selecting them from the List of registered devices without having to search for them. • Connected devices can only be disconnected from → AUDIO → Sound Out → Bluetooth → List of registered devices. Connecting, disconnecting, or deleting bluetooth devices in the list of registered devices In → AUDIO → Sound Out → Bluetooth → List of registered devices, Bluetooth devices are shown in the order that they were connected, and the same devices can be reconnected simply by selecting them without having to search for them again. List of registered devices List HBS-700 Delete Press OK(ꔉ) to connect the device. Delete All Close Connecting Select a Bluetooth device from the List of registered devices to connect to it. • The registered Bluetooth device will attempt to connect automatically depending on the characteristics of the device. (Refer to the manual for the Bluetooth device.) • You can stop the connection process immediately by selecting Stop. • The time it takes to connect to a device may vary according to the signal strength and the number of devices. 39 Disconnecting Select Disconnect to disconnect the device. • You can only disconnect a device from the List of registered devices. Deleting Select Delete Marked or Delete All to delete any registered devices. • Delete Marked: Press the button in List of registered devices to delete the selected device. • Delete All: Select Delete All in List of registered devices to delete all of the registered devices. Adjusting AV Sync. Adjust When a Bluetooth device is connected, go to → AUDIO → AV Sync. Adjust to adjust the synchronization between the video and the Bluetooth headset sound. • AV Sync.Adjust • Bluetooth ◀ 0 - On ▶ + Close • This feature is only available when a Bluetooth device is connected. • Audio sync may vary by manufacturer. • When playing video from a connected USB drive, AV Sync. Adjust can also be adjusted using the Set Audio. menu. 40 MY MEDIA Before using Connecting a USB Device Connect a USB device (external HDD, USB memory) to the USB port of projector to enjoy the content files stored in the USB device with your projector. You cannot write or delete data in the USB device. Connect a USB flash drive as shown below. USB flash Drive ￼ Removing a USB Device 1 Click the 2 Use the or button. button. button to move to USB Device and press the 3 Select a USB to remove. Wait for confirmation that the USB device has stopped before removing the USB. ￼ NOTE • If detached early, an error may occur on the projector or the USB storage device. • Once a USB device has been selected for removal, it can no longer be read. Remove the USB storage device and then re-connect it. 41 Tips for using a USB device • If the USB storage device has a built-in auto recognition program or uses its own driver, it may not work. • Some USB storage devices may not work or may work incorrectly. • If you use a USB extension cable, the USB device may not be recognized or may not work properly. • Use only USB storage devices formatted with the Windows FAT32 or NTFS file system. • For external USB HDDs, it is recommended that you use devices with a rated voltage of less than 5 V and a rated current of less than 500 mA. • It is recommended to use a Hard Disk Drive with its own power supply. (If the power being supplied is not sufficient, the USB storage device may not be detected correctly.) Note, a USB Hub is not supported. • It is recommended that you use USB flash drives of 32 GB or less and USB HDDs of 2 TB or less. • If a USB HDD with power-saving function does not work properly, turn the power off and on. For more information, refer to the user manual of the USB HDD. • Data in USB storage device can be damaged so be sure to back up important files to other devices. Data maintenance is the user's responsibility and the manufacturer is not responsible for data loss. 42 To use my media 1 Press the button on the remote control. 2 Select MY MEDIA. Select desired file from the list. Watch the chosen file. Sets play related settings by checking option during disk playback. My Media supporting file • Maximum data transmission rate: 20 Mbps (Mega bit per second) • External supported subtitle formats: *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX) • Internal supported subtitle formats: SRT/ASS/SSA (Supports internal subtitles generated from DivX6) Video Supported Codec Maximum: 1920 x 1080 @ 30p (only Motion JPEG 640 x 480 @ 30p) Extension .asf .wmv .divx .avi .mp4 .m4v .mov .mkv .ts .trp .tp .mts .m2ts Codec Video VC-1 Advanced Profile, VC-1 Simple and Main Profiles Audio WMA Standard, WMA 9 Professional Video DivX3.11, DivX4, DivX5, DivX6, XVID, H.264/AVC Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital Video H.264 / AVC, MPEG-4 Part 2 Audio AAC Video H.264 / AVC Audio HE-AAC, Dolby Digital Video H.264 / AVC, MPEG-2, VC-1 Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital Plus, AAC 43 Extension .vob .mpg .mpeg Codec Video MPEG-1, MPEG-2 Audio Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM Video MPEG-1 Audio MPEG-1 Layer I, II Audio File File type mp3 AC3 MPEG AAC, HEAAC CDDA Item Bit rate Sampling rate Bit rate Sampling rate Bit rate Sampling rate Bit rate Sampling rate 32 Kbps to 320 Kbps 32 kHz to 48 kHz 32 kbps to 640 kbps 32 kHz, 44.1 kHz, 48 kHz 32 kbps to 448 kbps 32 kHz to 48 kHz 24 kbps to 3844 kbps 8 kHz to 96 kHz Bit rate 1.44 kbps Sampling rate 44.1 kHz Bit rate LPCM Info Sampling rate 1.41 Mbps to 9.6 Mbps Multi-channel : 44.1 kHz, 88.2 kHz / 48 kHz, 96 kHz Stereo : 176.4 kHz, 192 kHz 44 Available photo file File type 2D (jpeg, jpg, jpe), 3D (jps) 3D (mpo) BMP Item Info Support File type SOF0: Baseline, SOF1: Extend Sequential, SOF2: Progressive Picture Size Minimum: 64 x 64 Maximum: Normal Type: 15360 (W) x 8640 (H) Progressive Type: 1920 (W) x 1440 (H) Support File type MPO Picture Size 4:3 size : 3648 x 2736, 2592 x 1944, 2048 x 1536 3:2 size : 3648 x 2432 Picture Size Minimum: 64 x 64 Maximum: 9600 (W) x 6400 (H) Support File type Interlace, Non-Interlace Picture Size Minimum: 64 x 64 Maximum: Interlace: 1200 (W) x 800 (H) Non-Interlace: 9600 (W) x 6400 (H) PNG * BMP and PNG format files may be slower to display than JPEG. 45 Watching the videos In the Movie List, you can watch movies stored on the connected USB device. Controls playback and sets options while viewing videos. Tips for Playing Video Files • Some subtitles created by users may not work properly. • The video and subtitle files should be placed in the same folder. For subtitles to display correctly, the video and subtitle files must have the same name. • We do not support any stream that contains GMC (Global Motion Compensation) or Qpel (Quarterpel Motion Estimation). • Only H.264 / AVC profile level 4.1 and lower is supported. • Video files that exceed 50 GB (gigabyte) are not supported for playback. The file size limit is dependent on the encoding environment. • DTS audio codec is not supported. Browsing Movie List Play a video file stored from a connected device. 1 Connect a USB storage device. 2 Press the button. 3 Use the or button to select Movie List and press the button. 4 Use the the , , button. or button to select the file you want and press 46 2 1 4 3 Page 1/1 Movie List USB - A B C D 5 Page E 051R312... 01:34:33 Go to root folder 6 No. Go to upper folder Exit 7 8 Description Thumbnails 1 Abnormal file File not supported 2 File List 3 Moves to the upper level folder. 4 Current page/Total no. of folder pages 5 Current page/Total no. of file pages 6 Moves to the top level folder. 7 Moves to the upper level folder. 8 Exit Movie List. Page Change Page 1/1 47 5 Control playback by using the following buttons. ￼ Q.MENU Item Option Hide 나가기 Exit Description Shows the current playing position. Use move forward or backward. Stops playing and returns to Movie List. or buttons to Returns to normal playback. Pauses the media player. If no button is pressed on the remote control for 10 minutes after pausing, the playback is restarted. Displays in slow motion. Whenever this button is pressed, the playback speed is changed.: x2, x4, x8, x16, x32 Reduces power consumption by adjusting peak screen brightness. Switches to the 3D screen. Option A pop-up window will appear. Hides the playback bar. Press the appear. Returns to the Movie List screen. Hide Exit button to make it Options for Movie List 1 Press the 2 Use the button. or button. 3 Use the , button to move to a desired option and press the , or button to set up each item. 48 Set Video Play. Item Description Picture Size Selects the size of a playback screen. • Full: Files are played in full screen mode according to the aspect ratio of video. • Original: Displays the video in the original size. Audio Language Allows you to select the language you want for the file with multiple audio tracks. This option is not available if the file has only one audio track. Subtitle Language The subtitle can be turned on or off. • Language: One of any of the available languages can be selected. • Code Page: A character set used for a subtitle can be selected. --Sync: If a subtitle is not synchronized with its video, you can adjust its speed at 0.5 seconds unit. --Position: Moves the location of a subtitle. --Size: Changes the subtitle font size. Repeat Turns the repeat function On or Off. When it is set to off, the next file can be played sequentially if the file name is similar. Set Video. You can change video settings. (Refer to PICTURE settings on page 70.) Set Audio. You can change audio settings. (Refer to AUDIO settings on page 76.) BLUETOOTH You can change Bluetooth settings. (Refer to Setting up bluetooth on the projector on page 36.) Set 3D Video You can set 3D video or 2D video. 3D setting You can set 3D settings. (Refer to OPTION 1 settings on page 82.) 49 Registering the DivX code Checks DivX Reg. Code for replaying DivX protected videos. Register at http://vod.divx.com. Use Reg. Code to rent or purchase movies at www.divx.com/vod. 1 In the Settings menu, move to OPTION 1 and press DivX(R) VOD. Registration Deregistration ￼ 2 Press the or button. Close button to move to Registration and press the You must register your device to play DivX(R) protected videos. Registration Code: XXXXXXXXXX Register at http://vod.divx.com ￼ OK 3 Check the DivX Registration Code. ￼ NOTE • Rented/purchased DivX files cannot be played if the DivX Registration Code of a different device is used. Use only the DivX Registration Code granted to this specific device. • Converted files not conforming to the DivX Codec Standard may not play or may produce abnormal sound. 50 To deregister the DivX code Use the DivX deregistration code to deactivate the DivX DRM function. 1 In the Settings menu, move to OPTION 1 and press DivX(R) VOD. 2 Use the or button to go to Deregistration and press the button. 3 Select Yes. Your device is already registered. Are you sure you wish to deregister? Yes No Deregistration code : ******** Deregister at http://vod.divx.com Continue with registration? Yes No ￼ ￼ NOTE • What is DRM [Digital Rights Management]? DRM technologies and services protect the interests and rights of copyright holders by preventing illegal use of digital content. Files can be played after the license is verified through an online method, etc. 51 Viewing the photos You can view photos stored on a connected device. Supported Photo Files PHOTO (*.JPEG) Baseline: 64-pixel (width) x 64-pixel (height) - 15360-pixel (width) x 8640-pixel (height) Progressive: 64-pixel (width) x 64-pixel (height) - 1920-pixel (width) x 1440-pixel (height) • Non-supported files are displayed in the form of an icon. • An error message is displayed for corrupted files or file formats that cannot be played. • Corrupted files may not be displayed properly. • It may take some time to view high-resolution images in full screen. Browsing Photo List 1 Connect a USB storage device. 2 Press the button. 3 Use the or buttons to select Photo List and press the button. 4 Use the the , , button. or button to select the file you want and press 52 2 1 4 3 Page 1/1 Photo List USB - A B C D 5 Page E 051R312... 01:34:33 Go to root folder 6 No. Go to upper folder Exit 7 8 Description Thumbnails 1 Abnormal file File not supported 2 File List 3 Moves to the upper level folder. 4 Current page/Total no. of folder pages 5 Current page/Total no. of file pages 6 Moves to the top level folder. 7 Moves to the upper level folder. 8 Exits Photo List. Page Change Page 1/1 53 5 Control playback by using the following buttons. 01_a.jpg 01/24/2013 1920 x 1080 479 KB [1/4] Slideshow Item BGM Q.MENU Option Hide Exit Description Selects the previous or next photo. Slideshow BGM All photos are displayed during slide show. • Set Slide Speed in the Option → Set Photo View. menu. You can listen to music while viewing photos in full size. • Set the BGM in Option → Set Photo View. menu. Rotates photos. • Rotates a photo 90°, 180°, 270°, 360° clockwise. • Photos cannot be rotated if their width is greater than the height of the max. supported resolution. Views the photo in full mode or original mode. Press the button to enlarge the image. Reduces power consumption by adjusting peak screen brightness. Switches to the 3D screen. Option A pop-up window will appear. Hide Hides the menu on the full size screen. • To see the menu, press the button on the remote control. Exit Exit from full screen photo view. 54 Options for Photo List 1 Press the 2 Use the button. or button. 3 Use the , button to move to a desired option and press the , or button to set up each item. Set Photo View. Item Description Slide speed Selects a slideshow speed. BGM Selects a music folder for the background music. • You cannot change the music folder while the background music is playing. • For background music, only the folder from the same device can be selected. --Repeat: Selects repeat play. --Random: Selects random play. Set Video. You can change video settings. (Refer to PICTURE settings on page 70.) Set Audio. You can change audio settings. (Refer to AUDIO settings on page 76.) BLUETOOTH You can change Bluetooth settings. (Refer to Setting up bluetooth on the projector on page 36.) Set 3D Video You can set 3D image or 2D image. 3D setting You can set 3D settings. You can set 3D settings. (Refer to OPTION 1 settings on page 82.) 55 Listening to music You can play audio files stored on the connected device. Supported Music Files *.MP3 Bit rate range 32 Kbps to 320 Kbps • Sampling rate MPEG1 Layer3: 32 kHz, 44.1 kHz, 48 kHz • Sampling rate MPEG2 Layer3: 16 kHz, 22.05 kHz, 24 kHz Browsing Music List 1 Connect a USB storage device. 2 Press the button. 3 Use the or button to select Music List and press the button. 4 Use the the , , button. or button to select the file you want and press 2 1 4 3 Page 1/1 Music List USB - A B C D 5 Page E 051R312... 01:34:33 Go to root folder 6 Page Change Page 1/1 Go to upper folder Exit 7 8 56 No. Description Thumbnails Abnormal file 1 File not supported 2 File List 3 Moves to the upper level folder. 4 Current page/Total no. of folder pages 5 Current page/Total no. of file pages 6 Moves to the top level folder. 7 Moves to the upper level folder. 8 Exits Music List. 5 Control playback by using the following buttons. Page 1/1 Music List USB STORAGE DEVICE Drive1 PAGE Page Change Page 1/1 Butterfly_... 01:34:33 002. - B02.mp3 Q.MENU Item Option Hide Description Changes the playing position. Stops playing. Returns to normal playback. Pauses the media player. Exit 57 Item Description Plays the previous/next file. Reduces power consumption by adjusting peak screen brightness. Sets up the options of Music List. Option Hide Hides the playback bar. • Press the button to make the playback bar appear. Exit Returns to the Music List screen. Options for Music List 1 Press the 2 Use the button. or button. 3 Use the , button to move to a desired option and press the , or button to set up each item. Set Audio Play. Item Description Repeat Selects repeat play. Random Selects random play. Set Audio. You can change audio settings. (Refer to AUDIO settings on page 76.) BLUETOOTH You can change Bluetooth settings. (Refer to Setting up bluetooth on the projector on page 36.) 58 Viewing files You can see document files stored on a connected device. Supported File Formats XLS, XLSX, DOC, DOCX, PPT, PPTX, TXT, PDF, HWP Microsoft Office: 97/2000/2002/2003/2007 Version Adobe PDF: 1.0/1.1/1.2/1.3/ 1.4 Version Hangul: 97/2000/2002/2005/2007 Version • File Viewer realigns a document, so it may look different from what is displayed on a PC. • For documents that include images, the resolution may look lower during the realigning process. • If the document is large or has many pages, it may take longer to load. • Unsupported fonts may be replaced by other fonts. • The file viewer may not open for Office documents that contain many high resolution images. In that case, reduce the image file size, save it on a USB storage device and run the file viewer again or connect your PC to the projector and open the file on your PC. 59 Browsing File List 1 Connect a USB storage device. 2 Press the button. 3 Use the or button to select File List and press the button. 4 Use the , , or button to select the file you want and press the button. 2 3 1 Page 1/1 File List USB - DOC A B C D 4 Page E Butterfly_... 06/09/2014 Go to root folder 5 No. Go to upper folder Exit 6 7 Description 1 File List 2 Moves to the upper level folder. 3 Current page/Total no. of folder pages 4 Current page/Total no. of file pages 5 Moves to the top level folder. 6 Moves to the upper level folder. 7 Exits File List. Page Change Page 1/1 60 5 Control playback by using the following buttons. • Click Go Page, then the pop-up window for selecting the number of page appears. Input the page to move to the page you want. • Press the button to zoom in or zoom out. Press the button and then use the , , , buttons to move to Go Page or Zoom. ￼ Go Page ꔦ Zoom Q.MENU Option Item Hide Exit Description Go Page Moves to the page you want. Use the , , , buttons to select a page and press the button. Zoom Enlarges or reduces the document. Option Sets up the options of File Viewer. Hide Hides the menu. • Press the Exit Returns to the File Viewer screen. button to make it appear. 61 Options for File List 1 Press the 2 Use the button. , , or button to set up each item. Set FileViewer Option Item Single Page Loading Image Quality Document Align Description On Loads and displays pages one by one. The initial loading time is short but a content-heavy page may be displayed slowly. Off Loads all pages of a file to memory before it starts to display them. The initial loading time is long but you can navigate pages quickly after loading is complete. If a file is too large, it may fail to load all the pages. You can set the quality of the image included in the document. The following three options are available for the image quality: High, Medium, Low. Higher the image quality, lower the display time. Selects initial document align method. File Viewer settings are default, so close the currently opened document to apply changes to the new document, if any. 62 3D function 3D technology uses different video frames for each eye to add depth to the video. While watching 3D WARNING • If you view 3D video or images too closely for a long period of time, you may experience eyestrain. • If you watch the projector or game screen for a long time with 3D glasses on, you may experience dizziness or eye fatigue. • People with chronic diseases (epilepsy, cardiovascular disease, blood pressure-related diseases, etc.), pregnant women, and people with serious motion sickness should avoid watching 3D video. • People with stereo blindness, or with stereopsis problems, should also avoid watching 3D video content. It may cause double vision or visual discomfort. • People with strabismus, amblyopia, or astigmatism may have difficulty perceiving video depth and may be fatigued easily due to double vision or other ailments. It is recommended to rest more frequently than other viewers. • Because 3D can be perceived as real, some viewers may be surprised or overexcited. • Do not watch 3D images near fragile objects or any objects that can be knocked over easily. • Take care not to injure yourself as you may subconsciously try to move away from the life-like 3D images. 63 • Warning about photosensitivity seizures --Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular patterns from a video game. If anyone in your family has a history of epilepsy or has ever experienced any kind of seizure, please consult your doctor before viewing 3D images. If you experience one of the following symptoms while watching a 3D video, stop watching the 3D video immediately and take a rest. --Dizziness, switched eyesight, twitching of the eye or facial muscles, involuntary movements, cramp, loss of consciousness, confusion, loss of sense of direction, or nausea. If the symptom does not disappear, please consult your doctor. • You can reduce the risk of photosensitive seizures by taking the following preventive measures. --Take a rest of 5 to 15 mins. for every 1 hour of viewing. --If vision varies between each eye, correct the variation before beginning to watch a 3D video. --Ensure that the 3D video is directly in front of you, at eye level. --You should stop watching if you experience a headache, fatigue, or dizziness. --Do not view 3D images for a long period of time when you are tired or ill. CAUTION • Extra special care is required for children watching a 3D video. When Watching 3D Video • Prevent children of 5 years or younger from watching a 3D video. It may impair the development of their eyes. • Children 10 years old or younger are still developing their eyesight and may have an excessive tendency to touch or jump at the screen. Adult guidance and supervision is recommended. • Since the distance between the eyes is narrower for children than in adults, children tend to notice a greater difference in the images seen by each eye. Therefore, even while watching the same 3D video, children may have a greater depth perception than adults. • Children under 19 years old or younger may respond with sensitivity to the light stimuli of 3D content. Excessive viewing when fatigued is not recommended. 64 • Elderly viewers may have a reduced depth perception than younger viewers. Avoid watching video nearer than the recommended distance. • Watch 3D images within the optimum viewing angle and distance. • If you are outside the viewing angle or distance, you may not be able to see 3D images. You cannot view 3D images when you are lying down. • You may see left and right images overlapped during projector initialization after it is powered on. It may take some time for optimization. • It may take some time for the 3D image to look normal after you turn your eyes away from the screen and look back at the 3D image. • It may flicker slightly while watching 3D images under a 3 wavelength lamp fluorescent light (50 Hz to 60 Hz) or near windows. If so, it is recommended to block the sun light with a curtain and to dim the lights. • The 3D glasses must be DLP-LINK (DLP Ready) type. • You may not be able to watch 3D properly if there is an obstacle between the projector and 3D glasses. • Install the 3D projector as far as possible from other devices. • If a future 3D broadcasting format that is not supported by this projector becomes the standard, an additional device such as a set-top box may be required. Please check the following when using 3D glasses. • Do not use 3D glasses as ordinary glasses, sunglasses, or protective goggles. --If you do so, this may cause injury. • Do not store 3D glasses in very hot or very cold conditions. If you do, this may cause them to become distorted. Do not use distorted glasses. • Do not drop 3D glasses or allow them to come into contact with other objects. --This may cause product malfunction. • The lenses of 3D glasses are easily scratched. Use a soft clean cloth when cleaning them. • Foreign particles on the cloth may cause scratches. • Do not scratch the surface of the 3D glasses' lenses with sharp objects or wipe them with chemicals. If the lenses get scratched, images may not look normal when viewing 3D. 65 Requirements for watching 3D images * Optimum viewing angle: Top/Bottom/Left/Right 9° Recommended viewing distance: 3 m to 5 m Recommended screen size: 101 cm ￼ * Watching 3D videos should be done in dark room environments only. NOTE • The pairing with the DLP-LINK glasses is affected by the intensity of light reflected from the screen. Therefore, the pairing with DLP-LINK glasses may not work properly if the light reflected from the screen is not bright enough, such as when the surrounding area is bright, the screen is big, or the maximum energy saving mode is enabled. • Some menus may not work while playing a 3D video. • You can only watch a 3D video properly when the 3D video format option has been selected on the projector. 66 Using the DLP-LINK (DLP-Ready) type glasses 1 While watching 3D images from the projector, press buttons on the glasses. 2 When you press the button, the glasses flicker while synchronizing with the 3D images. (The flickering is a unique operation method of DLPLINK type glasses. It may be different depending on the glasses type.) 3 If the glasses flicker or problems occur while watching 3D, first turn the lights off to make the room darker. Contact your projector seller for queries about the glasses. To view 3D images 3D imaging is a technology that utilizes the slight difference in left/ right eyes to make the images on the projector appear just like real-life 3-dimensional space. 1 Play supported 3D video titles. 2 Press the button to activate 3D. 3 Turn on the 3D glasses and put them on. 4 While viewing 3D images, press the button on the remote control to end 3D image viewing. 5 Press the button to switch the playing direction of an image. Select a screen with better 3D display quality. --If you press the button during viewing, it returns to 2D. * Depending on the input signal, the available 3D type may differ. 67 Supported 3D mode Horizontal Vertical Signal Resolution Frequency Frequency (kHz) (Hz) 720p 1080i 1280 x 720 89.9/ 90 59.94/ 60 Frame Packing 75 50 Frame Packing 45 60 Side by side(Half), Top and Bottom 37.5 50 Side by side(Half), Top and Bottom 33.7 60 Side by side(Half), Top and Bottom 28.125 50 Side by side(Half), Top and Bottom 53.95/ 54 23.98/ 24 Frame Packing 60 Side by side(Half), Top and Bottom, Single Frame Sequential 56.25 50 Side by side(Half), Top and Bottom, Single Frame Sequential 27 24 Side by side(Half), Top and Bottom 33.7 30 Side by side(Half), Top and Bottom 1920 x 1080 HDMI 67.5 1080p 1920 x 1080 Supported 3D Formats 68 Horizontal Vertical Signal Resolution Frequency Frequency (kHz) (Hz) Supported 3D Formats USB 1080p 1920 x 1080 33.75 30 Side by side(Half), Top and Bottom, MPO, JPS(Photo) RGB 1080p 1920 x 1080 67.5 60 Side by side(Half), Top and Bottom 69 Customizing settings SETTINGS 1 Press the 2 Use the , button. 3 Use the the , button. or button to select the desired item and press the , , button. or button to set up the desired item and press 4 Press the Menu button when completed. Description PICTURE Adjusts the image quality for optimal viewing. AUDIO Adjusts the sound quality and volume level. TIME Sets time-related settings. WIRELESS Wireless-related features. OPTION 1 Customizes the general settings. OPTION 2 Customizes the settings related the projector. INPUT Selects the desired input source. MY MEDIA Accesses photo, music, movie, and document files. 70 PICTURE settings 1 Press the button. 2 Use the , , or buttons to select PICTURE and press the button. 3 Use the PICTURE completed. •• Picture Mode : Standard •• Contrast 100 •• Brightness 50 •• Sharpness 20 •• Color 55 •• Tint 0 R button when The available picture settings are described as follows. Menu Energy Saving ꔉ OK •• ꕊ Energy Saving : Minimum , , or button to set up the desired item and press the button. --To return to the previous menu, press the (BACK) button. 4 Press the ꔂ Move Description Reduces power consumption by adjusting peak screen brightness. Mode Minimum/ Applies the pre-set Energy Saving Medium/ mode. Maximum G 71 Menu Description Picture Mode Selects the picture mode optimized for the viewing environment or the program. You can also customize advanced options for each mode. Mode Maximizes the visual effect of video. Vivid Heightens contrast, brightness, and sharpness to display vivid images. Displays images in standard levels of Standard contrast, brightness, and sharpness. Cinema Optimizes the image for a movie. Optimizes the image for sports by Sport emphasizing primary colors and dynamic actions. Optimizes the image for playing games Game on fast-moving screens. Menu for adjusting picture quality that allows experts and amateurs to enjoy the best projector viewing. Expert1 / --Expert mode is for picture tuning Expert2 professionals to control and fine-tune using a specific image. For normal images, the effects may not be dramatic. Contrast Adjusts the difference between bright and dark regions of the screen. Brightness Adjusts the overall screen brightness. Sharpness Adjusts the sharpness of the borders between bright and dark. Horizontal and Vertical Sharpness are available only in Expert1 / Expert2. Color Adjusts the intensity of all colors. 72 Menu Description Tint Adjusts the balance between red and green levels. Advanced Control Customizes the advanced settings. Picture Option Sets optional settings. Picture Reset Resets values customized by the user. Each picture mode is reset. Select the picture mode you wish to reset. Aspect Ratio Resizes the picture. Adjusts the picture quality of RGB-PC input. Option Screen (RGB-PC) Resolution Available resolutions are 768 resolution (1024 x 768/ 1280 x 768/ 1360 x 768, 60 Hz). Auto Config. Provides optimized picture quality by automatically calibrating the mismatch of horizontal width and picture shake caused by clashes between the internal settings of the projector and various PC graphic signals. • You can also use the button on the remote control. Position Moves the image up/down/left/right. Size Changes the screen size. Phase Makes the picture look clear by removing horizontal noise. Reset Restores all the settings to the factory default. 73 Advanced Control Menu Description Dynamic Contrast Adjusts contrast and color to the optimal level according to the screen’s brightness. Dynamic Color Adjusts colors for more natural-looking colors. Color Gamut Selects the range of colors that can be expressed. • Standard: Displays the original colors of an input signal regardless of the display features. • Wide: Makes use of the display's rich colors. Skin Color Skin color spectrum can be separately set to implement the skin color as defined by the user. Sky Color Sky color is set separately. Grass Color Natural color spectrum (meadows, hills, etc.) can be separately set. Gamma Sets the gradation curve according to the output of the picture signal in relation to the input signal. * Depending on input signal or other picture settings, the range of detailed items for adjustment may differ. Expert Control Menu Description Dynamic Contrast Adjusts contrast and color to the optimal level according to the screen’s brightness. Color Gamut Selects the range of colors that can be expressed. • Standard: Displays the original colors of an input signal regardless of the display features. • Wide: Makes use of the display's rich colors. Edge Enhancer Shows clearer and distinctive yet natural edges of the video. Color Filter Filters a specific color spectrum in RGB colors to fine-tune color saturation and hue accurately. 74 Menu Description In Expert mode, you can customize the options of each mode. Color Temperature Color Management System Gamma: Select 1.9, 2.2,or 2.4. a. Method: 2 Points --Pattern: Inner, Outer --Points: Low, High --Red/Green/Blue: The adjustment range for each color is from -50 to +50. --Apply to all inputs: The values of the Color Temperature is applied to all the input modes. b. Method: 20 Point IRE --Pattern: Inner, Outer --IRE (Institute of Radio Engineers) is the unit indicating the size of a video signal and can be set to 5,10,15, ... 100. You can fine-tune for each setting as shown below. --Luminance: The adjustment range is 50 to 500. --Red/Green/Blue: The adjustment range is -50 to +50. --Apply to all inputs: The values of the Color Temperature is applied to all the input modes. Adjusts Red/Green/Blue/Cyan/Magenta/Yellow colors. Allows an expert to adjust the tint using a test pattern. Six colors (Red/Green/Blue/Cyan/Magenta/ Yellow) can be selectively adjusted without affecting other colors. You may not see colors change on a normal picture even after adjustment. --Saturation Red/Green/Blue/Cyan/Magenta/ Yellow, Tint Red/Green/Blue/Cyan/Magenta/Yellow, Luminance Red/Green/Blue/Cyan/Magenta/ Yellow: The adjustment range is -30 to +30 each. * Depending on input signal or other picture settings, the range of detailed items for adjustment may differ. 75 Picture Option Menu Description Noise Reduction Reduces screen noise in the video. MPEG Noise Reduction Eliminates noise generated while creating digital picture signals. Black Level Adjusts the brightness or darkness of the screen to suit the black level of the picture input using the degree of darkness (black level) of the screen. Real Cinema Optimizes the screen for movie viewing. Color Temperature Adjusts the overall color of the screen to suit your preference. Select Warm, Natural, Cool, or Medium. 76 AUDIO settings 1 Press the button. 2 Use the , , or button to select AUDIO and press the button. 3 Use the , , or button to set up the desired item and press the button. --To return to the previous menu, press the (BACK) button. 4 Press the completed. AUDIO •• Sound Mode ꔂ Move ꔉ OK : Standard •• Sound Effect •• Auto Volume : Off •• Sound Out : Projector Speaker •• AV Sync. Adjust : Off button when The available audio settings are described as follows. Menu Description Sets the sound mode. Mode Sound Mode Standard Suitable for all types of video. News / Music / Cinema / Sport / Game Sets audio optimized for a specific genre. 77 Menu Description The user can select various sound effects. Mode Clear Voice II Makes the voice from the projector crisp and clear. Virtual Surround LG’s proprietary audio processing technology allows 5.1 channel-like surround sound from two speakers. • When Clear Voice II is set to on, Virtual Surround cannot be selected. Equalizer Adjusts the volume to a level of your choice using the Equalizer. • Audio-band (100 Hz/ 300 Hz/ 1 kHz/ 3 kHz/ 10 kHz) can be adjusted from -10 to 10. • Reset: Resets voice options that the user has changed. Balance Adjusts the balance of the left and right speakers. Reset Initialize the applied effect under the Sound Effect menu. Sound Effect Auto Volume Automatically adjusts the volume level. 78 Menu Description Sets the audio output of the projector. Mode Projector Speaker Sound is output through the projector speaker. External Speaker (Optical) Sound is output through the speaker connected to the optical port. • Digital Sound Out: Sets up Digital Sound Output. Sound is output through the Bluetooth headset. First, set Bluetooth to on. Sound Out Item Bluetooth Search Device Search for the device to connect to. List of registered devices Connected devices are saved in the List of registered devices. The saved list of registered devices can be displayed. 79 Menu Description Synchronizes video and audio directly when they do not match. If you set AV Sync. Adjust to On, you can adjust the sound output (projector speakers or SPDIF) to the screen image. Mode Projector Speaker Adjusts the synchronization of the sound from the projector's internal speakers. The + and - buttons allow the viewer to synchronize the audio with the video. External Speaker Adjusts how the sound is synced to external speakers, such as an external speaker connected to the digital audio output port, LG audio device, projector speaker, SPDIF, and headphone. The + and - buttons allow the viewer to synchronize the audio with the video. Bluetooth Adjusts the synchronization between the video and the Bluetooth device sound. --This feature is only available when a Bluetooth device is connected. --Audio sync may vary by manufacturer. --When playing video and music from a connected USB drive, AV Sync. Adjust can also be adjusted using the Set Audio. menu. Bypass Outputs broadcasting signals or the audio of an external device without audio delay. Audio may be output before video as it takes time to process video input into the projector. AV Sync. Adjust 80 TIME settings 1 Press the 2 Use the , , button. or button to select TIME and press the button. 3 Use the , , or button to set up the desired item and press the button. --To return to the previous menu, press the (BACK) button. 4 Press the completed. TIME ꔂ Move •• Sleep Timer : Off •• Auto Off : 60 min. ꔉ OK •• Automatic Standby : 4 hours button when The available time settings are described as follows. Menu Description Sleep Timer Turns off the projector after a preset number of minutes. To cancel the Sleep Timer, select Off. Auto Off If there is no input signal or button press, the projector automatically turns off after the preset time has elapsed. Automatic Standby Turns off the projector automatically after a set period of time if there is no button input on the projector. 81 WIRELESS settings 1 Press the button. 2 Use the , , or button to select WIRELESS and press the button. WIRELESS •• SCREEN SHARE , , or button to set up the desired item and press the button. --To return to the previous menu, press the (BACK) button. completed. ꔉ OK : [PJTR][LG]PF1000U •• Group 3 Use the 4 Press the ꔂ Move •• Channel button when The available wireless settings are described as follows. Menu Description The SCREEN SHARE displays the screen of the connected device. • You can check the SCREEN SHARE's ID. Mode Group This is the group setting for each device supporting the SCREEN SHARE feature. When the wireless connection is weak or unstable, adjust the group setting to correct the problem. Channel You can change the channel used for wireless connections. • Search Channels: Select channel searching methods. --Auto: The projector searches for available channels and automatically selects the least used channel. --Manual: You can select a channel manually. • Channel: This is shown when Search Channels is set to Manual. It allows you to specify a channel number to use. SCREEN SHARE 82 OPTION 1 settings 1 Press the button. 2 Use the , , or button to select OPTION 1 and press the button. 3 Use the , , or button to set up the desired item and press the button. --To return to the previous menu, press the (BACK) button. 4 Press the completed. OPTION 1 ꔂ Move ꔉ OK •• Language •• 3D Mode •• Auto Input Search : Off •• DivX(R) VOD •• Initial Setting •• Mode Setting : Standard button when The available OPTION 1 settings are described as follows. Menu Language Description Selects a desired Menu Language. Adjusts various aspects of 3D imaging. 3D Mode Mode 3D Picture Correction Switches left/right images of 3D video. Auto Input Search Automatically searches for and displays the input signal type when it is received. It is available only with external inputs (RGB-PC, HDMI1, HDMI2, AV, and Component). DivX(R) VOD Sets DivX related settings. Initial Setting Resets all the projector settings to the factory default. Do not turn off the power during initialization. Mode Setting Selects Standard or Store Demo. When in use in home, please select Standard. Store Demo mode is for store display. 83 OPTION 2 settings 1 Press the button. 2 Use the , , or button to select OPTION 2 and press the button. 3 Use the , , or button to set up the desired item and press the button. --To return to the previous menu, press the (BACK) button. 4 Press the completed. OPTION 2 ꔂ Move ꔉ OK •• Edge Adj •• Auto Keystone(Vertical) •• PJT Mode : Off : Front •• High Altitude : Off •• Blank Image : Blue •• Auto Power : Off •• Self Diagnosis button when The settings for OPTION 2 are described as follows. Menu Edge Adj Auto Keystone (Vertical) Description Edge Adj adjusts the right, left, top, and bottom width of the projected image if the projected image and screen are not perpendicular to each other due to a tilted screen. Auto Keystone(Vertical) provides a rectangular screen image by automatically adjusting the Keystone number when there is a trapezoidal screen image caused by tilting of the projector. • Use the Edge Adj (4 Corner Keystone) if you want a more accurate calibration of the screen than the Auto Keystone(Vertical). Item On Automatically adjusts the Keystone number. Off Manually adjusts the Keystone number. 84 Menu Description PJT Mode This function turns the projected image upside down or flips horizontal. • Select Rear when projecting from the back of the transparent screen purchased separately. • Select Front Ceiling when installing the product on the ceiling. • When the PJT Mode is Rear Ceiling/Front Ceiling, the left/right of the speaker changes automatically. High Altitude If the projector is used at an altitude higher than 1200 meters, turn this on. Otherwise, the projector may overheat or its protection function may be activated. If this happens, turn the projector off and then on again after waiting for several minutes. Blank Image Selects a background for blank image. Makes the projector turn on automatically when the adaptor plug is inserted. Auto Power Self Diagnosis Item On When the AC/DC plug is connected to the projector, it turns on automatically. Off When the AC/DC plug is connected to the projector, it goes into standby mode. Troubleshoots functional problems that can arise while using the product. * When the input is set to SCREEN SHARE, these features are disabled and cannot be used: Edge Adj, PJT Mode, and Auto Keystone(Vertical). 85 Connecting devices You can connect various external devices to the projector. Computer/Notebook ￼ USB Digital Device Video/DVD LG Audio Device Games Console Headphone Mobile Phone HDMI - Page 86 Composite (AV) - Page 87 Component - Page 87 RGB - Page 90 USB Device - Page 40 Headphone - Page 92 Digital Amp - Page 92 Mobile Phone (MHL) - Page 94 86 Connecting to HD receiver, DVD, or VCR player, external devices Connect an HD receiver, DVD, VCR player, or external devices to the projector and select an appropriate input mode. HDMI Connection With an HDMI cable, you can enjoy high quality picture and sound. Using a HDMI cable, connect the port of the projector to the HDMI output port of the device to connect. Both video and audio are output at the same time. You can also use the . Press the button on the remote control to select HDMI. You can connect with any HDMI input port. HDMI to DVI Connection Using an HDMI to DVI cable, connect the projector's port to the DVI OUT port. To output audio, use an audio cable for connection. You can also use the . Press the button on the remote control to select HDMI. You can connect with any HDMI input port. Optional Extras AUDIO OUT Optional Extras Not provided DVI OUT 87 AV connection Component connection Connect the output ports of an external device and the AV IN ports of the projector using an AV cable. Press the button on the remote control to select AV. Check whether cables of the same color are connected properly. You can enjoy a video by connecting the component port of an external device to the COMPONENT IN port of the projector. Press the button on the remote control to select Component. Check whether cables of the same color are connected properly. A) Accessories White Red White Red Red Yellow Red Blue Red Blue Red White Green White Yellow Not provided Green Yellow Accessories Optional Extras Red White Yellow Not provided Not provided Red White Red Blue Green VIDEO OUT 88 Connecting a PC B) The projector supports Plug & Play. Your PC will automatically detect the projector and requires no driver installation. HDMI connection Accessories White Red Yellow Green Blue Red Not provided Not provided Using an HDMI cable, connect the port of the projector to the HDMI output port of your PC. Both video and audio are output at the same time. You can also use the . Press the button on the remote control to select HDMI. You can connect with any HDMI input port. Red White Red Blue Green VIDEO OUT Optional Extras 89 HDMI to DVI connection Using an HDMI to DVI cable, connect the projector's port to the DVI OUT port. To output audio, use an audio cable for connection. You can also use the . Press the button on the remote control to select HDMI. You can connect with any HDMI input port. Optional Extras AUDIO OUT Not provided DVI OUT NOTE • It is recommended to use an HDMI connection for the best image quality. • Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. • In PC mode, there may be noise associated with the resolution, vertical pattern, contrast, or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate, or adjust the brightness and contrast on the PICTURE menu until the picture is clear. • The synchronization input form for Horizontal and Vertical frequencies is separate. • Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly. • If you are using DVI out from a PC, you have to connect analog audio separately. • When using the HDMI/DVI cable, Single link only is supported. 90 RGB connection Connect the PC output and the PC video input port of the projector with the RGB cable. For audio signal, connect the PC and the projector with an optional audio cable. Press the button on the remote control to select RGB-PC. Optional Extras Optional Extras Accessories Red White Yellow Red White Optional Extras RGB OUT (PC) You can connect the audio cable without using a gender as shown in the illustration above. Not provided AUDIO OUT AUDIO OUT RGB OUT (PC) 91 Connecting a laptop You can connect the projector to a laptop to use various functions. HDMI connection Using an HDMI cable, connect the port of the projector to the HDMI output port of your laptop. Both video and audio are output at the same time. You can also use the . Press the button on the remote control to select HDMI. You can connect with any HDMI input port. Optional Extras The table below shows examples of switching the output. For more information, refer to the External Output, Connecting to an External Monitor, or similar sections of the owner's manual of your computer. Brand Switching Output NEC [Fn]+[F3] Panasonic [Fn]+[F3] Toshiba [Fn]+[F5] IBM [Fn]+[F7] Sony [Fn]+[F7] Fujitsu [Fn]+[F10] LG [Fn]+[F7] Samsung [Fn]+[F4] Macintosh Adjust the control panel to enable mirroring after start-up. 92 Connecting headphones Connecting a digital amp You can listen to the audio through a headphone. Using an optical cable, connect the digital audio input port of a digital amp to the port of the projector. The output of an amp with a digital converter must be set to the desired audio format. When using a HDMI cable to connect a home theater or when connecting an optical output to an external audio device, set Sound Out to External Speaker (Optical) as shown below. If a projector, home theater, or the speaker of an external audio device is operating at the same time, there will be an echo. Not provided Optional Extras 93 NOTE • Refer to the user manual of the audio device to connect. • When connecting this product to other devices, make sure to turn off and unplug all the devices. • The audio output of this product has wide-ranging audio bandwidth, so the receiver volume must be adjusted properly. Speakers can be damaged by unexpected high frequencies. • Connecting the port of the projector to the digital audio input port of a digital amp and the audio input port of the projector to the analog audio output port of the digital amp can cause sound oscillation due to the closed loop. Remove one of the two connections to prevent this. (This also applies to home theater devices.) 94 Using the mirroring function of a mobile phone MHL connection The Mobile High-definition Link (MHL) is an interface that can connect a mobile phone to the projector and play video and audio from the mobile phone through the projector. This only applies to products with a HDMI input that supports MHL. (To find out whether your device is MHL-certified, please contact your device manufacturer.) For MHL support, check the port. Use a dedicated cable for MHL. Optional Extras ￼ NOTE • When you connect a mobile phone to the port, you can see the mobile phone screen through a projector. --This only applies to mobile phones that support MHL. --You can use the remote control for some applications. • Disconnect the MHL cable from the projector when: --The MHL function is disabled. --Your mobile device is fully charged in standby mode. 95 Maintenance Clean your projector to keep it in optimal condition. Cleaning Cleaning the lens If there is any dust or staining on the lens surface, you must clean the lens. Use an air spray or a cleaning cloth to clean the lens. To remove dust or stains, use an air spray or apply a small amount of cleaning agent onto a swab or soft cloth to lightly rub the lens. Please be aware that liquid may flow into the lens if the product is sprayed directly onto the lens. Cleaning the projector case To clean the projector case, first unplug the power cord. To remove dust or stains, use only a dry, lint-free, nonabrasive cloth to polish the lens. Do not use alcohol, benzene, thinners, or other chemicals, which may damage the case. 96 Specifications Model PF1000UG (PF1000UG-GL) Resolution (Pixel) 1920 (Horizontal) × 1080 (Vertical) Aspect Ratio 16:9 (Horizontal:Vertical) Panel size (mm) 11.896 Projection Distance (Video size) (mm) 413.55 to 685.75 (1524 to 2540) Ratio of Upward Projection 125 % Working range of the remote control 6m Power AC 100 - 240 V, 50 Hz/ 60 Hz Power consumption 100 W AC-DC Adaptor Manufacturer : HONOR Model : ADS-110CL-19-3 190110G 19 V 5.79 A Manufacturer : CHICONY Model : A16-140P1A 19 V 7.37 A (only India) (Adaptor Input 100 - 240 V @ 50/60 Hz) Audio Output 3W+3W Video Input NTSC M / PAL-B, D, G, H, I / PAL M / PAL N / PAL 60 / SECAM Height (mm) 127.6 (without foot) / 128.8 (with foot) Width (mm) 131.4 Depth (mm) 309 Weight (g) 1900 USB Device 5 V, 0.5 A (Max.) 97 Temperature Environment Condition Operation 0 °C to 40 °C Storage -20 °C to 60 °C Relative humidity Operation 0 % to 80 % Storage 0 % to 85 % * Use only power supplies listed in the user instructions. * Contents in this manual may be changed without prior notice due to upgrade of product functions. Supported RGB/HDMI - PC Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 350 31.468 70.09 720 x 400 31.469 70.08 640 x 480 31.469 59.94 60.31 800 x 600 37.879 1024 x 768 48.363 60.00 1152 x 864 54.348 60.053 1360 x 768 47.712 60.015 1280 x 1024 63.981 60.020 1920 x 1080 67.5 60 • If an invalid signal is input into the projector, it will not be displayed properly on the screen or a message such as No Signal or Invalid Format will be displayed. • The projector supports the DDC1/2B type as the Plug & Play function (Auto-recognition of PC monitor). • PC synchronization signal types supported: Separate type synchronization. • In PC mode, 1920 x 1080 (1080p) is recommended for the best picture quality. 98 Supported HDMI-DTV Mode Resolution 480p 576p 720p 1080i 1080p Horizontal Frequency (kHz) Vertical Frequency (Hz) 31.47 60 31.47 59.94 31.50 60 31.25 50 45.00 60.00 44.96 59.94 37.5 50 33.75 60.00 33.72 59.94 28.125 50 67.500 60 67.432 59.939 27.000 24.000 26.97 23.976 33.75 30.000 33.71 29.97 56.25 50 • To provide the best picture quality, a 1920 x 1080 (1080p) resolution is recommended. Component Port Connecting Information Signal Component 480i / 576i O 480p / 576p O 720p / 1080i O 1080p O (50 Hz / 60 Hz only) 99 Open Source Software Notice Information To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to firstname.lastname@example.org. This offer is valid for three (3) years from the date on which you purchased the product. 100 SYMBOLS Refers to alternating current (AC). Refers to direct current (DC). Refers to class II equipment. Refers to stand-by. Refers to “ON” (power). Refers to dangerous voltage.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project