LG LD-2140WH Owner's Manual
Add to my manuals24 Pages
LG LD-2140WH is a dishwasher designed to make dishwashing effortless and efficient. Its advanced features ensure sparkling clean dishes every time. With multiple programs, including delicate, normal, and intensive, you can customize the wash cycle based on the soil level of your dishes. The dishwasher's spacious interior accommodates a variety of dishware, from plates and glasses to pots and pans. Its adjustable racks and cutlery basket provide flexibility in loading and unloading. Additionally, the LD-2140WH operates quietly, allowing you to run it without disturbing your daily routine.
advertisement
DISHWASHER OWNER'S MANUAL MODEL : LD-2140WH / LD-2140SH / LD-2140MH LD-2140WHB / LD-2140SHB / LD-2140MHB LD-2140WHU / LD-2140SHU / LD-2140MHU Please read this manual carefully before operating dishwasher. Retain it for future reference. your CONTENTS SAFETY AND CAUTION 3 INSTALLATION INSTRUCTIONS 5 PARTS NAME 9 FUNCTION OF CONTROL BUTTON 10 HOW TO USE AND OPERATE 11 OPERATING 17 SEQUENCE PROGRAM 18 USER MAINTENANCE INSTRUCTIONS 19 TROUBLE SHOOTING GUIDE 20 SPECIFICATION SAFETY AND CAUTION IMPORTANT SAFETY INSTRUCTIONS WARNING ? Please read this manual using ? ? - using your dishwasher, follow including the following: When carefully before During the dishwasher for the first time. ? This manual contains very important notes regarding the installation, use and maintenance of your dishwasher. The manufacturer can not be ? household ? ? Do not for normal use. use the dishwasher for industrial ? installation Electrical connection must be in Electrical cable safety is label. rating only guaranteed ? or not use an extension Do not push down or cord.) ? If the hot water exceeds 65ºC, adjust the water heater If the hot water setting. must supply cord is damaged, only be replaced by the manufacturer it its service agent or similar qualified person in order to avoid a or use the the inner It may failure of your opened. the deformation Do not on or detergent for hand washing. The detergent for dishwasher should be used for normal operation. This appliance is fitted with a safety function that automatically stops the operation of the dishwasher when it is exposed to heavy disturbance on its Dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with skin and eyes and keep children away from the dishwasher when the door is open. Check that the detergent receptacle is connected to cold water. If power sit mains. temperature can not be maintained below 65ºC, the dishwasher must be ? electric shock. dishwasher. ? cause an fire. young children or infirm persons without supervision. regulations.(Do ? or may Do not spray water on the appliance. It may cause the failure of electric parts cause when the earth system of your house is in accordance with the related local ? They door when the door accordance with the ? any kinds of solvent in your use and commercial use, or other purpose. The appliance is not intended for use During ? Do not or by ? Only suitable household utensils should be placed in the dishwasher. (Please avoid utensils; that are non- explosion ? designed use dishwasher. instructions. This dishwasher is precautions, heatresistant, metal decorated, etc.) responsible for problems caused by ignoring these safety and caution ? basic empty after completion of the wash a cycle. hazard. This appliance must be positioned so that the plug is accessible. The appliance is to be connected to the water mains using new hose-sets and that old hose-sets should not be reused. 3 SAFETY AND CAUTION Child Safety ? Controls may be locked changed by a child. ? children away from detergents and rinse-aids. Do not allow children to operate the dishwasher. ? ? ? ? "Child Lock" mode to prevent from all the setting from being Keep Young children should be CAUTION ? using supervised to concerning ensure that they do not play with the appliance. the Power Cord they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Most appliances recommend SAVE THESE INSTRUCTIONS GROUNDING INSTRUCTIONS appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance This with all local codes and ordinances. WARNING - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded. Do not modify the plug provided with the appliance; if it will not fit the outlet have a proper outlet installed by a qualified electrician. 4 INSTALLING INSTRUCTIONS 4 WARNING A qualified electrician/plumber If dishwasher is installed in or cabinet out any work required to Step1: Step PREPARE CUPBOARD OPENING This dishwasher is 1 shown as designed Select a possible To : to fit the size CAUTION location as for of connection to the ensure wall. below. ease water and drain 3 2 or PREPARATION FOR ELECTICAL WIRING For 2 a corner, minimum of 5cm of space is required between the washer and an adjacent competent person should carry electrical/plumbing install this appliance. a close to sink as should not be installed house fuse open circuit breaker before installation. Do not use an extension cord or adapter plug with this appliance. Electrical and earthing connections must comply with the national electrical code/provincial and municipal code and/or other local codes. the dishwasher more remove or pipes. good drainage, personal safety, than 3 meters away from the sink. 1 This appliance must be supplied with correct rating voltage and hertz as shown on an instruction manual, and connected to individual, properly earthed branch minimum 15 amp time delay fuse. circuit, protected by circuit breaker Wiring 2 or must be 2 a wire with Earth. The power plug must be in a accessible location adjacent to and not behind the dishwasher and within 1.2 meters of the dishwasher 3 side.(See page 7 Fig.A) The power plug must be correctly earthed, if in doubt, have it checked by a qualified Electrician. No other appliance should be connected to the same plug outlet by a double adapter or similar plug. Unit:mm Any bare wood surrounding the dishwasher should be sealed with a waterproof paint or sealant to prevent swelling. 5 INSTALLATION INSTRUCTIONS Step3: Step4: PREPARING THE DISHWASHER INSTALLING THE DISHWASHER FOR INSTALLATION IN CUPBOARD 1 2 Lay the dishwasher Adjust as the legs on its back. Before sliding the dishwasher into the cupboard opening, all necessary height balancing adjustments should be made using a spanner. 1 to the shown in below required height figure. 2 and Slide the dishwasher into the cabinet opening carefully. Make sure that the drain hose inside the cabinet is not kinked or stretched. CAUTION If the is below 850mm, you should remove the top table by unscrewing the 2 screws. (Two of rear) 6 height of the cupboard INSTALLATION INSTRUCTIONS Step5: DRAIN LINE CONNECTION If the end of drain hose does not fit to 1 the drain line, use a rubber connector(not supplied) resistant to heat and or that is airtight an connection be made. Refer to detergent. Fig.B a DIY merchants. There are two typical connections shown in Figure A, B. 2 to a separate standpipe, it is essential that This should be available from plumbing shop ■ When the drain hose is connected as The "S" trap spigot must be drilled out cleanly and free of obstruction to its maximum internal diameter, if used for drainage. To prevent siphoning, one of the following methods must be used: ■ When the drain hose is connected to a sink "s" trap or waste disposal unit, the hose must be looped up to the underside Fig. B : Drainage connection - stand pipe. of the bench top and secured. Drain hose Extension Extend drain hose Fig. as shown below. A CAUTION When you connect or extend drain hose, make sure that drain hose is not kinked. (Bends should have a 40 mm radius.) 7 INSTALLATION INSTRUCTIONS Step6: Step8: WATER SUPPLY CONNECTION HOW TO LEVEL THE DISHWASHER 1 Connect the water supply hose to the water tap as shown.(Some models consist of an inlet valve and hose.) After a when you open or close the door. If this does happen you need to adjust the level of the This dishwasher may be fed with either hot or cold water. If the water can not be dishwasher. maintained below 65ºC, the dishwasher must be connected to cold water. 2 installing the dishwasher, you may notice slight sticking of the door to the dishwasher, Case 1. In case the door is slanted to the right connecting, the sealant tape or sealing compound to avoid water leaks. When Make sure sharply that the line is not kinked or bent. Fig. C ? Water tap If the door slants to the right, see fig, C and follow these instructions: 1) Unscrew(counter-clockwise) the left leg of the back side and correct the level. of door and repeat if necessary until the door opens and closes 2) Check Water hose supply ? the opening properly. When the product should be Case 2. In no slant case is correctly leveled, stickiness , or There friction sound. the door is slanted to the left Step7: FINAL CHECK AND ASSEMBLING 1 2 Securely hand tighten supply hose to the water supply. Plug the power supply cord into an earthed electrical point and switch on. Fig. ? After installing and prior to using the dishwasher with crockery, we are no ensure operating problems or see fig. D and of door if there still remains sticky or friction sound. 2) Check the opening of door and repeat if that there necessary until the door opens and closes water leaks. When the dishwasher is used for the first, there may be a loud noise, if this happens, If the door slants to the left, follow these instructions: 1) Check the opening recommend that you use the dishwasher on Quick mode to rinse through. At this stage it is useful to D ? properly. When the product should be turn off the power and restart sound. the dishwasher. 8 no slant is , correctly leveled, stickiness or There friction PARTS NAME 1. Control Panel 10. Adjust Leg 2. Door Handle 11. Upper 12. Cutlery 13. Detergent 14. Vapor 15. Upper Spray 3. Front Cover 4. Lower Cover 5. Process Monitor 6. Power Switch 16. Lower Rack Rack And Rinse Aid Vent Cover Spray Arm Arm 7. Drain Hose 17. Filter ASM 8. Inlet Hose 18. Lower Rack 9. Power Cord 19. Salt Container Inlet Hose Funnel ※ The appearance and specifications may vary without notice. ※ In the case of some models, a Inlet hose can be united with a 9 product. Cap Dispenser FUNCTION OF CONTROL BUTTON DELAY START TIME LEFT Before ? starting, the display window shows the running time of ?Ifyouwantto delay the start of the selected program. After starting, the display window shows the remaining time. If the dishwasher has a trouble, the trouble type is displayed. ? ? Drainage : Problem of before overfilling water ? Water inlet trouble : If this : Water : Heater trouble leakage ※" " : letters No error message SPRAY INTENSITY ? With each press, the level of water jet is changed to When select ? Used to lock unlock or prevent all the setting from being changed by operating temperature to with be ? 1 a ? 77℃. This function is beep on/off function can be set by pressing the The button simultaneously for a automatically canceled few seconds. then, when power failure will appear in the time occur. ? The dishwasher must be Quick and Pre-wash child. For locking/ unlocking, press Intensive and Auto button for a few seconds simultaneously. 10 ? surge disturbance to the machine, the automatically turned off for safety. switched off. ? ? automatically switches off for safety and energy saving. In case of irregular power may be BEEP ON/OFF the control buttons to the will be up can CHILD LOCK Extra Hot function, Refill ? hour to 19 hours. EXTRA HOT ? button aid adjusted from (See page 17) ? pressing by 1 hour. The delay start time operating, press power on. After operating, this time are For specil rinse ? ? this button first for time will increase trouble POWER with salt program button. Pressing the delay displayed, please refer to the trouble shooting guide page 20 and follow the guide. error Refill ? selected program, press this button trouble : INDICA TOR - a "on" display. The beep on/off function is automatically canceled when power failure occur. PROGRAM ? When you want to select program, press each button. HOW TO USE AND OPERATE 1. Take care not to obstruct the rotation of the spray arms and ensure that large items do not prevent the detergent dispenser lid from opening. Dishwasher your Loading For better washing performance, always load the dishwasher according to the instructions. Before loading items into the dishwasher clean off large particles of food, in particular insoluble items such as bones, pips, etc. When loading accordingly: the dishwasher, please 3. act Using Cutlery ■ Position crockery such that water will the contact all surfaces. angle to help properly. water prior off and at an dry to on Loading loading Take in the dishwasher. the Lower Rack The lower basket is best loaded with dinner soup bowls, dishes, pots, pans, lids and even the grill tray. plates, Plates should be positioned upright and facing the centre of the rack and pots, pans and large dishes must be turned upside down. Soup plate Soup plate hinged and cover clipped food should be care sharp 2. with the handles down. The in the top of the dishwasher. ■ Items with burnt soaked run cutlery away from the basket if you choose not to use them. Place knives in the separate rack for located can ■ Deep based items should be placed Basket basket to prevent of similar items. Place the cutlery in cover be Cutlery should be mixed within each section of the nesting the Dinner plate 11 when items. loading and unloading HOW TO USE AND OPERATE 4. Loading the Upper It is best to load this with Rack 5. (Not delicate more plates, long cutlery, cups, glasses and dishwasher safe plastic items. Plates should be positioned upwards with the plate bottom facing the front of the positioned levers Take spray care arm for long on either side of the rack to possible upper rack remains level. And when you pull the rack not to obstruct the rotation of the move it position. We recommend that where glasses. stem models) down to its lower Extra cups or cooking utensils can be laid on the fold down cup racks, which also provides support all adjusting, ensure that the rack is empty. You can change the position of the upper rack by lifting the rack upward, into the upper position, or by pulling on the two rack. and bowls must be on Upper Rack Your upper rack can be raised or lowered to cater for different sized crockery. Before items such as, small Cups, glasses upside down. Adjusting the the upward, hold the middle location of the upper rack marked position) ( under the upper rack. After adjusting that the spray the rack arm levels, check is free to rotate. ? Front Non Dishwasher Safe Items The combination of high water temperatures and dishwasher detergent may damage particular items, therefore we do not recommend dishwasher to wash the using the following: Copper or anodized aluminum Hand painted silver or gold leaf crockery Wood Iron or bone handled utensils or non rust WARNING proof utensils Plastic items that which are not Before adjusting, ensure the rack empty of all crockery. Otherwise crockery may be damaged or you may be injured. dishwasher safe. 12 is HOW TO USE AND OPERATE 6. ? Adding Detergent Dispenser Detergent must be put into the detergent chamber before starting every program except the Pre-Wash. ? Push latch to open Please follow the manufacturer's instructions within the manual, when determining the correct amount of detergent to use. ? If your dishes moderately dirty, slightly less detergent than use are you may recommended. ? ? Chambers hold 15g and 25g. The amount of detergent required depends on the program. Please refer to the guide table. PROGRAM AMOUNT OF DETERGENT Intensive 25g Auto 20g Eco 15g Quick 10g Pre-wash ? After the No detergent is Place proper detergent into this compartment detergent supplied, WARNING the chamber lid should be closed. ? ? The detergent used is Dishwasher detergent The detergent is dispensed automatically during the operation. only the Information detergent washing detergent because the foam detergent intended for household dishwashers. (Ordinary hand- should not be used, can and like all harmful and kept out of reach of children. After completion of the wash program, the detergent compartment should be checked and any remaining as operation. Use special household chemicals it should be treated The chamber lid remains open after Detergent a interfere with proper operation.) 13 removed. HOW TO USE AND OPERATE Rinse Aid 7. Adding Dispenser ? For filling To fill the Rinse Aid chamber, rotate the round cap counter clockwise and remove. Fill the container to the maximum level with a good quality Rinse Aid, then replace and lock the cap. The Rinse Aid is during The the automatically dispensed final rinse cycle. dosage is factory installations. If, after cloudy spots, streaks set to suit most you notice water marks on washing, or your glassware, it may be necessary to increase the setting. To do this, remove the cap and rotate the indicator arrow to a higher setting then replace the cap If the . foam is present on the bottom of the glass or the bottom of the glasses are smeared machine, select ? For a or lower setting. refilling Depending on the dosage setting and the number of washes, the chamber may need to be topped up, approximately once a month. The rinse aid level can by two methods. By the indicator window ? on when the dishwasher door is be checked the dispenser fully open. Rinse Aid Information Black indicates sufficient Rinse Aid ? Clear indicates Rinse Aid required By the light on the control panel, being lit, when the dishwasher is working on. O Rinse Aid is necessary to remove spots and streaks from dishes as well as improved drying. Using the correct amount will improve wash performance. However, using too much can produce excess foam leading to possible water leaks. lamp is lit, it means the rinse aid is almost empty. Refill the Rinse Aid chamber as soon as possible. When the 14 HOW TO USE AND OPERATE 8. Salt Filling This model has a water softener to soften hard water. Please read these notes In order to carefully for correct provide satisfactory rinsing results, operation. the dishwasher soft water, i.e.,containing little the dishes and interior containers. requires lime, otherwise water stains will be left behind on If the tap water exceeds a certain level of hardness, it must be softened, i.e.,decalcified. or no This is achieved The ? required Filling ? ? ? ? by adding a salt to the water softener inside the dishwasher. special amount of salt is set up according how hard your tap water is. to with Salt for the first time Check the water hardness of your area. Set the water hardness according to the Remove lower rack and (Your be able to tell you method of the water softener. water setting supplier will this.) the cap of salt container. Before using your dishwasher for the first time, fill with salt, the container has a capacity of 1.9kg. Use a funnel for ease and clean filling, ensuring that coarse salt or regenerating salt intended for unscrew dishwashers is used. ? ? ? After filling, wipe off any spilled salt to seal the cap properly. Screw the cap tightly to prevent any suds from penetrating into up the water Setting Adjust the container. softening system the water softener to the setting to the corresponding hardness of the water in your water softener has 8 adjustment levels. The dishwasher is programmed at the factory for a water hardness level of This can be checked and altered by using the buttons on the control panel. 1. First, 2. Press ensure " the dishwasher is switched off. Delay Start and Power button simultaneously and keep them pressed. A" and 1 figure will appear in the time display. To change the setting: Simply press the Quick button and the figure will change one by one. The display will change between and" ". " 3. ". " " 4. Once the hardness The hardness setting is correctly adjusted, setting is then saved. 15 press the Pre-wash button. area. The HOW TO USE AND OPERATE ■ For refilling When the salt container is empty, the salt refill lamp will automatically turn on during operation. The salt should be refilled after the cycle has finished. We recommended the salt refill should always be carried out, as mentioned previous page, piior to starting immediately thin and drain away any excess salt solution. the next operation. This will When the lamp is lit, this means that the salt aid is almost empty. Refill the Salt Aid chamber as soon as possible. Note ? ? After filling with salt, it may take When the control is set to The Salt Refill lamp " a little while before the indicator light turns ", it is not necessary to fill up with salt is switched off. If the control is set between " off. as no salt is consumed while the dishwasher is "and" ", then salt must be added to the operating. dispenser. WARNING Do not pour detergent into the salt container. This will 9. Fold down dividers. (Not on all 10. models) improve stacking water softener. Drying To assist Fold-down dividers at the lower rack be lowered to destroy the the can drying, we recommended that door be fully opened after the cycle. of pots and pans. 11. ? ? ? ? ? ? 16 Energy Test(EN50242) Appliance loaded in accordance with standard specifications. Example of loaded dishwasher : p.11~12 Capacity : 12 place settings Comparability course : Eco Rinse Aid setting : 3 Reference cleaner : 6g of detergent onto the inside surface of the door and fill 24g into the detergent dispenser. Height-adjustable Rack-U must be inserted into the uppermost position. OPERATING SEQUENCE Before starting, the display window shows the running time of the selected program. After starting, the display window shows the remaining time. The time in the display window will start to decrease minute by minute. If the door is opened during the program a safety device ensures that the machine Press the "Power" button Check there is rinse aid and salt The corresponding indicator lights illuminate if refilling is required. Open will stops. the door and check Once the door is re-closed the program will start from where it was interrupted. the filters Ensure they are positioned (See Instructions"). clean and At the end of the properly "User Maintenance program "End"is Load the dishes and on buzzer sounds. is in "Cool Cool Pull the upper rack out and arrange the glasses, a displayed the digital display The display then shows "Cd" to indicate that the dishwasher Remove any excess food. Pull the lower rack out and arrange the dishes and cutlery. cups, washing etc. dry" mode. dry-"Cd" This process is not part of the program. At this time, the fan will operate for a few CAUTION minutes to diminish any moisture. more Do not load the items in upper rack with the lower rack is pulled out and loaded. If you want, you the dishwasher. can now remaining open and unload Otherwise the dishwasher Ensure the spray freely later. rotate Measure out detergent Add the the switches off for arms can required amount of detergent dispenser and close the lid. Setting and starting automatically safety and energy saving CAUTION into the lower rack first and then the upper one;this will avoid water dripping from the Empty upper rack onto the dishes below. the program WARNING Press the program button to select the desired program. In it is not advisable to open the door while the machine is working. If the door is opened, a safety device ensures that the machine stops. Care must be taken if the door is opened during the hot phase or immediately after a After 3 seconds, the machine will start. If necessary, select the option function corresponding to the desired program. The indicator lights of the program and all the phases of the program will come on. general program has finished, 17 as steam may escape. PROGRAM ▶Running ▶Running time may vary according to the water temperature, water pressure and time doesn't include "Cool dry 60 min". voltage. - WASH Program Pre Wash Main Wash 50℃ 70℃ RINSE Rinse 1 Rinse 2 Rinse 3 DRY Heating Rinse Cool dry 70℃ Intensive Auto The program sequence is optimized and adapted in accordance with how dirty the dishes are. 45℃ 65℃ 35℃ 40℃ Eco Quick Pre-wash and water consumption is kept as low as possible. The F on display means that the sensor is sensing the status of the Intensive Wash This program is ideal for very dirty crockery, in particular pots, pans and dishwasher. casserole dishes. Eco Wash Auto Wash This program is used for During the Auto program, the degree of soiling in the dishes is determined by the amount of clouding of the water. According the degree of soiling, the program automatically adjust the washing time, temperature. As ※ "Cool ※ Auto Restart dry" a soiled crockery. Quick Wash Can for lightly and cutlery. use dishes result, the energy is not part of the slightly operating program.(See page 17) If the dishwasher is turned off by a power failure, it will restart automatically from the position it stopped at adjusting accordingly. 18 soiled recently used USER MAINTENANCE INSTRUCTIONS To prevent trouble and poor operating, it is important to check filters and spray arms at Filters Upper Spray ? Remove the lower rack first. ? ? Turn the mesh filter counterclockwise. ? ? Take out the mesh filter, upper STS filter and outer filter. ? ? Pull the upper rack forwards. Check that the water jet holes ? ? If cleaning is required, unscrewing the nut. Clean the spray reverse order. arm mesh filter upper STS filter Upper spray outer filter ? Spray Arm Check that the water jet holes are not blocked. ? If cleaning is required, remove the arm by pulling ? up. Clean the spray arm and replace it are not blocked. Clean them if necessary. Replace them in the reverse order. Lower Arm pulling down. 19 arm remove and the replace arm by it in the TROUBLE SHOOTING GUIDE If problem occurs check In the unlikely event that service engineer. a lights when the come on power is turned Water is not The display display display show " shows " " The spray Drain shows " shows " " " " " ? Door is not ? The start button is not ? The drain hose is kinked. code) ? The filter is code ? Excessive water is supplied than ? There is with the inlet valve. ? Water is not ? Water is leaking ? Damage to the unit has been caused ? The water heater circuit is ? The mounting of the spray arms is blocked by particles. (Clean the holes of the spray arm) ? The amount of ? The salt container is empty. The salt container cap is not code code code deposits are dish washer after left on the washing. ? Dry are results left on are not results Washing satisfactory. glassware satisfactory. are not display fully cut was off. closed. pressed. clogged. (Clean problem the filter) supplied. (Water tap the normal water level. is not opened) from the Hose connections. detergent by a water leak. damaged. or rinse-aid set securely ? Too little Rinse-Aid dispensed. ? Incorrect amount of ? "code. a of the house tripped. dispensed. ? shows electricity circuit breaker Too little Rinse-Aid ? The or ? ? " properly inserted into the socket. The do not rotate arms is not ? smoothly Streaks contact a Fuse blown Pump operated) shows display White rectified, please ? away. " (Automatically The cannot be problem be solved. can Plug on. pumped (The display The whether this ? The machine does not start. The the see Possible Causes Problem No below to incorrectly. screwed detergent. Utensils incorrectly arranged or overloaded. Filters are clogged. Water jet holes of spray arms blocked. Spray arms' rotation obstructed by utensils. ? Unsuitable program selected. ? No error message.(See page 17) 20 food on. MEMO 21 MEMO 22 MEMO 23 LD-2140WH LD-2140WHB LD-2140SH LD-2140SHB LD-2140MH LD-2140MHB LD-2140WHU LD-2140SHU LD-2140MHU Capacity 12 Place Weight See rating label Power Supply See rating label Power Consumption See rating label Water Feed Pressure P/No.: 3828DD3002U settings 50~800kPa
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project