LG | GCC-5240P | LG GCC-5240P Owner’s Manual

Portable PCMCIA
BZ03
GCC-5240P
EnglishDeutcFraIopP
CAUTION
The laser used in the CD-RW/DVD-ROM drive
:
Do not
attempt
to open the
To reduce the risk of electric
No user-serviceable
Refer
servicing
to
Use of controls
or
shock, do
parts inside.
qualified
can
damage
your eyes.
cover.
service
performance
of
not
remove cover
(or back).
personnel.
procedures
other than those
specified
herein may result in hazardous radiation exposure.
WARNING
To reduce the risk of fire
:
rain
or
or
electric
shock, do
not expose this
appliance
to
moisture.
The power source voltage of the AC adapter is listed on the
Plug the AC adapter only into an outlet with proper voltage.
nameplate.
Industry Canada requirement
This class B
digital apparatus
Equipment Regulations.
Cet
appareil numerique
meets all
de la classe B
requirements
respecte
of the Canadian
toutes les
exigences
Interference-Causing
du
Reglement
sur
le
materiel brouilleur du Canada.
FCC COMPLIANCE STATEMENT
Note
-
-
-
:
This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may
However, there is
no
If this
does
cause
harmful interference to radio communications.
particular installation.
reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
equipment
guarantee that interference will
cause
not
occur
harmful interference to radio
or
in
a
television
receiver is connected.
-
?
Consult the dealer
Authorized Service Center for
help.
expressly approved by the party responsible for compliance
to operate the equipment.
This CD-RW/DVD-ROM Drive is for use only with UL listed personal computers that have
installation instructions detailing user-installation of card cage accessory.
Changes
or
modifications not
could void the user's
?
or an
FCC WARNING
authority
i
This
of
product is manufactured to comply with the radio interference requirements
89/336/EEC, 93/68/EEC and 73/23/EEC.
EEC DIRECTIVE
CAUTION
-
INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM.
CLASS 1
LASER PRODUCT
KLASSE 1
LASER PRODUKT
LUOKAN 1
LASER LAITE
KLASS 1
LASER APPARAT
This unit
uses
the
This unit
uses
CD-ROM discs with the
following
disc
When you use this unit as a CD
discs with the following mark.
types with the marks:
player,
following
This unit
uses
CD-R discs with the
This unit
uses
CD-RW discs with the
This unit
uses
High Speed
following
mark
use
following
mark.
compact
mark.
Recordable
following
mark.
ReWritable
ReWritable
WARNING:
or erase
CD-RW discs with the
Drives
Only
High Speed
bearing
the
logo "Compact
Disc ReWritable
High Speed"
can
HighSped
write
CD-RW media.
High Speed CD-RW media may be recognized by the same "Compact
Speed" logo on the disc label or packaging material, or by the fact that
speeds of "4X to 10X, or "Up to 10X".
Attempted writes to High Speed CD-RW Media using
"Compact Disc ReWritable High Speed" may result in
ii
Disc ReWritable
it lists
CD-RW Drives not
data loss.
High
recording
bearing
the
logo
POWERBSY
ON
US
HCL
SE
FF
O
Contents
Introduction
Features.............................................2
Systemrequirements....................................2
Packageitems.........................................3
PleaseattachFerritecore................................3
Importantprecautions....................................4
Locationandfunctionofcontrols...........................5
Installation
HardwareInstallation....................................6
SoftwareInstallationfordevicedriver........................7
InsertingandRemovingthePCcard........................7
Operation
Loadingandejectingadisc...............................8
PlayingamusicCD.....................................9
.9
PlayingDVDvideoandMPEG2movievideo.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Appendix
Troubleshooting.....................................10-11
Specifications.........................................12
Microsoft
and
Windows
registered in the United States and
Corporation.
The company names and product names written in this manual are trademarks
or registered trademarks of the respective companies.
other countries
by
are
trademarks
the Microsoft
1
OEBSY
ON
PSHC
L
OE
OF
Introduction
Thank you for
to/from
a
purchasing
the Portable CD-RW/DVD-ROM drive.
computer will allow you to write and read data
CD-R, CD-RW disc, and read data from other discs, such as DVD-ROM,
Connecting
CD-ROM,
this drive to your
etc.
Features
?
Portable Slim CD-RW/DVD-ROM drive
?
24X
Writing(CD-R), 10X Rewriting(CD-RW), 24X Reading(CD-ROM)
Reading(DVD-ROM)
Operates on the AC adapter
Buffer Under Run error protection technology
Emergency eject support
Top loading system with power eject
and
8X
?
?
?
?
System requirements
Make
sure
that your
computer
meets the
requirements for
Type2. You
Connect the drive to the Card slot for PCMCIA
connection of the drive.
will need the
following
operate this drive:
?
IBM-compatible PC,
?
OS
:
Pentium 350MHz
higher
( Windows
2000 Professional ( Windows 2000 )
Millennium Edition ( Windows Me )
or
Microsoft Windows 98 Second Edition
Windows
Windows
98 SE
)
Windows XP
of RAM
?
64
?
PC Card Slot
Mbytes
:
or more
Notebook
or
desktop computer
with
a
PCMCIA2.1
slot.
?
Installation
requires 1GBytes
?
3.5"
disk drive &
floppy
of free hard disk drive space
mouse
(Microsoft compatible)
2
Type
||
or
|||
to
Package items
Make
sure
that you have all of the
following components
and accessories in the
package:
Item
Quantity
A. CD-RW/DVD-ROM drive
B. PC Card
C. AC Power
D.
Writing
E. DVD
F. Set
(PC Card,
Interface
Cable)
Software
(Nero Burning Rom)
Software
diskette
1
(FD)
H. Software installation
software
1
manual(PCMCIA)
1
Writing
1
(This manual)
J. Ferrite Core Filter
2
Please attach Ferrite
By attaching
included Ferrite
1
1
(Power DVD)
G. Quick Start Guide for
I. Manual for drive
1
1
Adapter
Player
Up
1
cores
cores on
the Interface
Cable, it will decrease possible
video noise and EMI.
As you attach the Ferrite
firmly.
cores
Please attach Ferrite
to the Interface
core near
About 10cm
About 8cm
Cable, please close the Ferrite
each end of the Interface Cable.
core
Important precautions
Following
these
when
precautions
the drive
handling
or
discs.
Precautions
Please take notice that the manufacturer of this
equipment
does not offer any
warranty against data loss due
installation
or
indirect
to
inappropriate
Please take notice that the manufacturer will bear
indirect
handling
or
direct
or
damages.
damages
caused
by
the
of this
use
Please take notice that the manufacturer will bear
responsibility
or
no
for direct
or
its malfunction.
responsibility
for
damage
to
data caused
Please
by this product.
backup(copy) all important
no
product
data
protection against
as
data loss.
Installation
Avoid
-
-
-
-
-
placing the drive
high humidity
high temperature
in
a
location
subject
to:
excessive dust
mechanical vibration
direct
sunlight
Operation
Don't
move
the drive
suddenly
from
a
cold
temperature suddenly. Condensation may
Make
sure
causing
to
drive
the disc before
moving
to
warm one or
causing
raise the
room
abnormal
the drive. The disc
operation.
may be damaged,
data loss.
Be careful to
drive. In
remove
place
occur,
prevent foreign objects, such as liquids or metal, from entering the
foreign object enters the drive, please consult the dealer where the
case a
purchased.
interrupt the electric power while the drive is operating.
While drive is operating, don't move the drive with disc, or don't give
drive, since it becomes the cause which damages disc.
was
Don't
a
shock to the
AC
Adapter
plug in or remove the AC adapter using wet hands.
Don't damage the AC adapter by scratching, modifying, or bending
Use only supplied AC adapter.
Don't disassemble the AC adapter.
Don't
its prongs.
Location and function of controls
This drive should be used
only
in its current hardware and software
configuration.
1
CLOSEPUSH
9
POWERBUSY
POWER
BUSY
ON
PUSH
OFF
CLOSE
456
23
1.
2.
78
MANUAL
EJECT
Top Cover
Power
Busy Indicator
--
The indicator
lights
in green when the power to the
drive is on, and the Indicator blinks when the disc is
is
3.
accessing
being set,
or
when the drive
data.
Eject Button
Press this button to open the
--
when power is
4.
Power Switch
5.
applied
--
Use this switch to turn the drive
Headphone
Volume Control
6.
Headphone
Jack
7.
DC In Jack
8.
Interface Connector
--
top
cover.
The button works
only
to the drive.
Connect the AC
--
--
Adjusts
Adapter
your
on
and off.
headphone
sound level.
cable.
This Interface connector is used to connect to the PC
Card Connector Cable.
9.
Manual
push
Eject
Lever
(Bottom side)
this lever in the direction of the
--
When the power
arrow
5
to open the
supply
top
of the drive is
cover.
off,
Installation
OEBSY
ON
PSHC
L
OE
OF
Hardware Installation
Notes
to
Connecting
computer
Make
an
sure
you have
a
personal computer
available PC card slot before
drive to your
with
connecting
the
personal computer.
Please refer to the device driver manual for the
method of
setup, and the procedure of connection.
Connect the drive to the
To AC Wall
outlet.
figure
computer
as
shown in
to the left.
1. Power for all devices should be turned off
before
attaching
the cables.
Connect the PCMCIA interface cable into the
interface connector at the
rear
of the
portable
CD-RW/DVD-ROM drive.
POWERBUSY
ON
PU
S
HCLOSE
OFF
2. Insert the interface cable card into your
computer's
card slot
3. Connect the AC
jack
at the
rear
Attach the AC
firmly.
adapter plug
to the DC IN
of the drive.
adapter
to the AC outlet.
Notes
?
Discharge static electricity:
electricity could destroy this drive or components in a computer. Therefore, before
installing the drive, touch a metal object to discharge any static electricity that may have
charged your body or clothes. In addition, avoid wearing clothes that are likely to generate
static electricity, such as wool sweater.
Please do not turn off the drive, when the drive is recognized by the computer.
If you turn off the drive, Normal operation of a computer becomes impossible.
Please do not connect AC adapter and PC card cable by any means other than specified
Static
?
?
above.
?
In order to
prevent a top cover opening accidentally during operation, this drive has an
ejection mechanism. For this reason, when the power supply is off, even if someone
pushes an eject button, the top cover does not open. Moreover, there may be one second
or more of delay until the top cover opens, after pushing the eject button.
electric
6
Software Installation for device driver
The drive includes device driver software that tells the drive how to
operate from
your PC.
Install the device driver
using
the
supplied
diskette "GCC-5240
Support
Software" in
your PC.
Refer to the manual.
Inserting and Removing the PC Card
The attached PC card
removed and inserted
1.
Stop
the
application
supports the plug and play function of Windows,
by performing the following operation.
software
currently
and
can
used.
2. Click the icon "Card" of the taskbar located
on
your screen's bottom
right
side.
indicator
blinks,
3. Click "DuoATA Card".
4. Click "Ok" and
Don't
or
remove
remove
the PC card.
the PC card when the Power
during computer startup.
busy
on
the drive
be
Operation
OEBSY
ON
PSHC
L
OE
OF
Loading and ejecting
a
disc
1.
Push the
Eject
2.
Load
Loading
disc.
a
Push down
a
Button to open the
disc
Top
cover.
(Label facing up.)
on
the center of the disc until the
disc clicks into
spin
off the
place. Otherwise the disc
spindle and be damaged.
may
Please do not press too hard. Also, be careful
on the pick-up mechanism.
not to touch the lens
3.
Close the
top
cover.
ON
OFF
Notes
When
loading a disc, press the disc's edge against the side of the spring-loaded
bumper inside the disc compartment. Make sure that the disc's recording surface
does not sit on top of the bumper before closing the top cover.
Ejecting
a
disc
Power must be
1.
The
to the drive.
top
eject button to open the
cover will open slightly.
Carefully
2.
applied
Push the
open the lid to the
top
cover.
straight-up position.
Removing the disc. Hold one finger against the
edge of the disc from the side of the drive,
and press another finger against the spindle in
the center of the drive to
remove
the disc.
ON
OFF
3.
Close the
top
cover.
Notes
Make
sure
the disc has
stopped turning
before
trying
to
eject
the disc.
Don't open the top cover when the power busy indicator blinks. Opening the cover
while the power busy indicator blinks will stop any operation with the computer.
8
Playing
Listening
a
music CD
to sound
You
can also attach a pair of headphones for personal listening after setting
Analog mode. Attach headphones with a standard 1/8" stereo plug into the
headphone jack on the right side of the drive.
the
When connected to
audio
a computer, you can play audio CD's through your computer's
system after setting Digital Audio mode.
Use Windows
Digital
or
"Windows Media
Player"
manual for detail.
And, refer
to
"Setting
of
Audio" in Software Installation manual.
Playing
DVD video and MPEG2 movie video
The drive must be connected to
a computer, and basic installation already done.
supplied application software 'Power DVD' in your PC.
Inserting the provided disc will automatically start installation. Follow the wizard.
After installation, remove the Power DVD disc and put it away for safekeeping.
Inserting a DVD Video disc into the drive will automatically start playing the disc.
Install the
DVD video
Each
region code:
region around the world has a different region number on the DVD video
being sold in a region.
The region code can be changed to other regions up to 5 times by using the
software decoder (Power DVD).
If you change the region code 5 times, the drive will lock onto the last (5th change)
region code, and cannot change the drive to another region code.
This limitation is a requirement as licensees of DVD drive technology.
movies
OEBSY
ON
PSHC
L
OE
OF
Appendix
Troubleshooting guide
If the drive does not
operate normally, check the following. Since the defect may be
drive, also check the devices that make up your
system, the settings of application software being used, etc.
If the suggested solutions still cannot restore the drive to normal, do not attempt to
caused
by
device other than this
repair yourself.
Consult your dealer.
Problem
Cannot
play
the drive
or
a
DVD
certain
Possible Causes
or
CD in
types of
1. The disc is not installed
Corrective Action
1. Reinstall the disc
correctly.
correctly.
discs cannot be read in the
2. The disc is
drive.
3. The
2. Clean the disc surface.
dirty.
pick-up
lens is
dirty.
4. The disc is scratched
or
3. Clean the
4.
Change
lens.
pick-up
the disc.
warped.
5. The disc
uses a
region
code that cannot be
cover
cannot be
opened
manual for
1. AC
Plug
is not connected
1. Connect the AC
to AC outlet.
2. DC
Plug
2. Connect the DC
jack.
tightly
3. Power Switch is not turned
recognized by
the
and
1. The PC Card is not
properly
Plug
.
3. Turn the Power Switch
on.
Drive is not
plug
tightly.
is not connected
to the DC
system.
system
help.
the drive.
on
Top
5. Refer to your
played
1.Make
connected.
on
try again.
sure
is seated
PC Card cable
properly
and
re-install the device driver.
2. Power Switch is not turned
2. Turn the power Switch
and
on.
No sound
(CD)
1. The
headphone
cable is
1.
Securely
or
sound
is muted with software.
2.
Adjust
the volume.
Release
software.
10
connect it to the
headphone jack on this drive.
not connected.
2. Volume is too low
on
try again.
muting
with
Problem
Drive will not
certain
media
play
Possible Causes
media
types of CD
or
or
DVD
1. The disc doesn't match
your
(on
system.
Is the media disc the
correct format for the
of
system that you
Corrective Action
1. Check the disc format.
PC
a
an
type
are
opposed
HFS disc
to
as
Apple/Mac
or
mats will not
using.
ISO9660 IBM
PC format
compatible
UNIX disc for-
function)
2. Has the Windows DVD-ROM
2. Virus
possibility.
software driver program
been
corrupted by
Run
a
and
repair
a
virus?
Virus Scan program
if
possible.
Specifications
133x21x155mm
Dimensions(WxHxD)
Weight
350g
Interface
PCMCIA card
Type
2
Data Transfer Rate
Read
CD-ROM
CD-R
3,600 kB/s (24x) Max.
3,600 kB/s (24x) Max.
CD-RW
2,250 kB/s (20x) Max.
DVD-ROM
11.0Mbytes/s (8x) Max.
5.54Mbytes/s (4x) Max.
5.54Mbytes/s (4x) Max.
4xCLV 600kB/s (Mode1) CD-R/RW
10xCLV 1,500kB/s (Mode1) CD-R/RW
16xCLV 2,400kB/s (Mode1) CD-R
24xCLV 3,600kB/s (Mode1) CD-R
DVD-R
DVD-RW
Write
CD-R/RW
Access Time
(Average)
Buffer Size
CD 110ms, DVD 120ms
2Mbytes
Compatible Media
Read Only
CD-DA(audio CD), VIDEO CD ,CD-I
CD-ROM(Mode 1, Mode 2)
CD-ROM XA(Mode2 Form 2),
Photo CD(Multisession), CD Extra
CD-R/RW, CD-TEXT
DVD-ROM(Single layer 4.7GB, Dual layer 8.5GB)
DVD-R(4.7GB), DVD-RW(4.7GB)
Read/ Write
Power
CD-R, CD-RW
Disc-at-once, Track-at
Methods
Writing
Requirement
Input
Output
Operating Environment
Temperature
Humidity
Storage Environment
Temperature
Humidity
-
For the sake of
change
-
once,
Multi-session, Packet Write
Adapter
100-240VAC, 50/60 Hz
5V 2A
5to35degC
20to80%
-20 to 55
degC
15% to 85% RH
periodic improvements, specifications
and appearance
are
subject
to
without notice.
We have taken all
be
AC
responsible
possible
measure
to
assure
for the consequences if defect
the
quality
occurs.
of
our
products,
but
we
cannot
ⓒ 2002
Copyright
Caution!
The disc rotates at
high speed in the drive unit.
Use of worn, damaged, or non-standard CD-ROM discs
can only adversely affect the drive and cause the disc to
LG Electronics U.S.A. Inc.
1000
Sylvan Ave.
Englewood Cliffs NJ
07632
U.S.A.
shatter
http://www.lgeus.com
or
crush while in
or
Disc crush
can
only
use.
occur
when you
CD-ROM disc in the drive. It is
LG Electronics Canada Inc.
550 MATHESON Blvd. East
Mississauga.
Ontario L4Z4G3 Canada
occurrence, but there
Always
the drive.
House, 264 Bath Road,
United
2.
Berkshire SL1 4DT
Slough
be taken to
inserting
them into
care not to use worn, cracked, damaged,
warped or poor quality CD-ROMs, as this may
cause damage to your drive.
Check the clear plastic on the center of the disc,
cracks here
Kingdom
are
the main
cause
of disc crush.
3. Do not
play CD-ROMs which are a non-standard
(I.e. non-circular)shape, such as heart shaped
discs, or discs in the shape of a business card.
Goldstar France E.U.R.L
Paris Nord II
can
1. Take
Willich, Germany
LG Electronics U. K. Ltd.
LG
steps which
check your discs before
LG Electronics Deutschland GMBH
D-47877
use a damaged
extremely rare
prevent it.
Jakob-Kaiser-Straße
12,
are
an
22, Avenue des
Nations-B.P.50372 VILLEPINTE
95945 ROISSY CDG CEDEX France
How
can
you
keep your
discs from
becoming
damaged?
LG Electronics Italia S.P.A.
Centro Direzione "IL Quadrate" Via
Modigliani,
20090
Segrate (MI) Italy
1. When not in use, remove discs from the drive.
Keep discs in the packaging supplied with them
2.
and out of direct
sunlight
and away from heat
sources.
LG Electronics
Espana
Complejo Europa Empressaries (Edif.Bruselas)
Ctra. N-VI 28230 Las Rozas Madrid Spain
LG Electronics Australia
Pty
Rydalmere NSW
http://www.lge.com.au
23, pike
or
st
Website ;
Ltd.
2116
Excessive vibration or a sudden jolt to the drive during
operation may cause a malfunction.
Avoid exposing the drive to sudden changes in
temperature as it may cause condensation to collect
inside the drive.
http://www.lge.com
http://www.LGEservice.com
P/NO. 3828HM1039A
ⓒ2002 Made by
Download PDF