LG | 19M38HB-B | LG 19M38AB-B Owner’s Manual

Owner's Manual
IPS LED MONITOR
LED LCD MONITOR
(LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
Please read this manual carefully before operating
your set and retain it for future reference.
IPS LED(LED LCD) MONITOR MODEL
19M38A
19M38D
19M38H
19M38AB
20M38A
20M38D
20M38H
19M38HB
22M38A
22M38D
22M38H
24M38A
24M38D
24M38H
27MP38VQ
27MP38HQ
www.lg.com
2
TABLE OF CONTENTS
CONTENTS
ENGLISH
ENG
3
LICENSE
27 TROUBLESHOOTING
4
ASSEMBLING AND PREPARING
29‌SPECIFICATIONS
4
Unpacking
39
Preset Modes (Resolution)
6
Parts and buttons
40
Indicator
7
Moving and Lifting the Monitor
8
Setting up the Monitor set
8
- Attaching the Stand Base
9
- Detaching the Stand Base
10
- Mounting on a table
10
- Using the cable holder
12
- Mounting on a wall
13 USING THE MONITOR SET
13
Connecting to a PC
13
- D-SUB connection
13
- DVI-D connection
14
- HDMI connection
14
Connecting to AV Devices
14
- HDMI connection
15
Connecting to External Devices
15
- Peripheral device connection
16 CUSTOMIZING SETTINGS
17
Customizing Settings
17
- Menu Settings
19
-Picture
20
-Color
21
-Display
21
-Audio
22
-Others
23
READER Setting
24
FUNC. Setting
24
-SMART ENERGY SAVING
25
-Picture Mode
26
-Color Weakness
41 PROPER POSTURE
41
Proper posture for using the Monitor set.
LICENSE
19M38H
19M38HB
20M38H
22M38H
24M38H
3
27MP38VQ 27MP38HQ
ENG
ENGLISH
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
The following content is only applied to the monitor which is sold in Europe market and which needs to
meet the ErP Directive:
*This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to display.
*To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
4
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
ENGLISH
ENG
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
CD(Owner's Manual) /
Card
D-SUB Cable
( This cable is not included in all
countries. )
or
Power Cord
AC-DC Adapter
( Depending on the country )
AC-DC Adapter
( Depending on the country )
DVI-D Cable
Stand Body
Stand Base
( This cable is not included in all
countries. )
HDMI Cable
Stand Body
Two Screws
Stand Base
( This cable is not included in all
countries. )
ASSEMBLING AND PREPARING
5
CAUTION
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.
ENG
ENGLISH
Do not use any unapproved accessories to ensure the safety and product life span.
yy
Any damages or injuries by using unapproved accessories are not covered by the warranty.
yy
6
ASSEMBLING AND PREPARING
Parts and buttons
ENGLISH
ENG
Power Indicator
yyLighting On: Turned on
yyLighting Off: Turned off
(Power Button)
Button (See p.16)
Connection panel (See p.13~15)
ASSEMBLING AND PREPARING
Moving and Lifting the Monitor
It is advisable to place the monitor in the
yy
original box or packing material before attempting to move it.
Before moving or lifting the monitor, disconyy
nect the power cord and all cables.
Hold the top and bottom of the monitor frame
yy
firmly. Do not hold the panel itself.
When moving the monitor, avoid any strong
yy
shock or vibrations to the product.
When moving the monitor, keep it upright,
yy
never turn the monitor on its side or tilt it
sideways.
CAUTION
As far as possible, avoid touching the moniyy
tor screen. This may result in damage to the
screen or some of the pixels used to create
images.
ENG
ENGLISH
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe transportation regardless of its shape or size.
When holding the monitor, the screen should
yy
face away from you to prevent it being
scratched.
7
8
ASSEMBLING AND PREPARING
ENGLISH
ENG
Setting up the Monitor set
27MP38VQ 27MP38HQ
Attaching the Stand Base
1 Attach the Stand Body to the monitor set.
1 Place the Monitor set with the screen side
down on a flat and cushioned surface.
2 Use two screws to fix the Stand Body and
monitor set.
3 Attach the Stand Base.
4 Tighten the screw to the right with a coin.
CAUTION
Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.
2
19M38A
20M38A
22M38A
19M38D
20M38D
22M38D
24M38A
24M38D
19M38H
20M38H
22M38H
24M38H
19M38AB
19M38HB
Stand Body
1 Attach the Stand Body to the monitor set.
2 Attach the Stand Base.
3 Tighten the screw to the right with a coin.
Stand Body
Stand Body
Stand Base
Stand Base
ASSEMBLING AND PREPARING
Detaching the Stand Base
27MP38VQ 27MP38HQ
down on a flat and cushioned surface.
1 Turn the screw to the left with a coin.
2 Pull out the Stand Base from the Stand Body.
3 Remove two screws and pull out the Stand
Body from the monitor set.
19M38A
20M38A
22M38A
19M38D
20M38D
22M38D
24M38A
24M38D
19M38H
20M38H
22M38H
24M38H
19M38AB
19M38HB
1 Pull out the Stand Body and Stand Base
from the monitor set.
2 Turn the screw to the left with a coin.
3 Pull out the Stand Base.
Stand Body
Stand Base
Stand Body
Stand Base
Stand Body
CAUTION
Stand Body
Stand Base
This illustration depicts the general model of
yy
connection. Your monitor may differ from the
items shown in the picture.
Do not carry the product upside down holding
yy
only the stand base. The product may fall
and get damaged or injure your foot.
ENG
ENGLISH
1 Place the Monitor set with the screen side
2
9
10
ASSEMBLING AND PREPARING
Mounting on a table
3 Press (Power) button on the bottom switch
ENGLISH
ENG
panel to turn the power on.
1 Lift and tilt the Monitor set into its upright
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
CAUTION
Unplug the power cord before moving the
Monitor to another location. Otherwise electric
shock may occur.
10 cm
10 cm
10 cm
10 cm
Using the cable holder
2 Connect the AC-DC Adapter and Power Cord
to a wall outlet.
Cable holder
or
ASSEMBLING AND PREPARING
Using the Kensington security system
WARNING
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit http://www.kensington.com .
Connect the Kensington security system cable
between the Monitor set and a table.
Do not touch or press the screen when
adjusting the angle of the monitor.
Do not hold this set like below picture.Monitor
screen can detach from stand base and injure
your body.
NOTE
The Kensington security system is optional.
You can obtain it from most electronics stores.
NOTE
Tilt from +20 to -5 degrees up or down to adjust
the angle of the Monitor set to suit your view.
Rear
ENG
ENGLISH
When you adjust the angle, do not hold the
bottom of the Monitor set frame as shown on
the following illustration, as may injure your
fingers.
Front
11
12
ASSEMBLING AND PREPARING
Wall Mount (A x B)
yy
Mounting on a wall
ENGLISH
ENG
For proper ventilation, allow a clearance of 10 cm
on each side and from the wall. Detailed
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
10 cm
10 cm
10 cm
10 cm
If you intend to mount the Monitor set to a wall,
attach Wall mounting interface (optional parts) to
the back of the set.
When you install the Monitor set using a wall
mounting interface (optional parts), attach it
carefully so it will not drop.
1 If you use screw longer than standard, the monitor might be damaged internally.
2 If you use improper screw, the product might be
damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
Model
19M38A
19M38D
19M38H
20M38A
20M38D
20M38H
22M38A
22M38D
22M38H
Wall Mount (A x B) 75 x 75
Standard screw
M4
Number of screws 4
Model
19M38AB 19M38HB
24M38A 27MP38VQ 24M38H
24M38D 27MP38HQ
Wall Mount (A x B) 100 x 100
Standard screw
M4
Number of screws 4
A
B
CAUTION
Disconnect the power cord first, and then
yy
move or install the Monitor set. Otherwise
electric shock may occur.
If you install the Monitor set on a ceiling or
yy
slanted wall, it may fall and result in severe
injury.
Use only an authorized LG wall mount
yy
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
yy
cause damage to the Monitor set and void
your warranty.
Use only screws and wall mounts that
yy
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
Screw length from outer surface of back
yy
cover should be under 8mm.
Wall mount Pad
Back Cover
Wall mount Pad
Back Cover
Standard screw
Max.8mm
NOTE
Use the screws that are listed on the VESA
yy
standard screw specifications.
The wall mount kit will include an installation
yy
manual and necessary parts.
The wall mount bracket is optional. You can
yy
obtain additional accessories from your local
dealer.
The length of screws may differ depending
yy
on the wall mount. Be sure to use the proper
length.
For more information, refer to the
yy
instructions supplied with the wall mount.
USING THE MONITOR SET
13
USING THE MONITOR SET
Your Monitor set supports Plug & Play*.
yy
*Plug & Play: A PC recognizes a connected
device that users connect to a PC and turn
on, without device configuration or user
intervention.
DVI-D connection
Transmits a digital video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with a DVI cable as shown in the following
illustrations.
D-SUB connection
Transmits analog video from your PC to the
Monitor set. Connect the PC and the Monitor set
with the supplied D-sub 15 pin signal cable as
shown in the following illustrations.
D-SUB
CAUTION
RGB OUT
PC
NOTE
When using a D-Sub signal input cable
yy
connector for Macintosh
Mac adapter
yy
For Apple Macintosh use, a separate plug
adapter is needed to change the 15 pin
high density (3 row) D-SUB VGA connector
on the supplied cable to a 15 pin 2 row
connector.
Connect the signal input cable
yy
and tighten it by turning the
screws clockwise.
Do not press the screen with
yy
your finger for a long time as this may
result in temporary distortion on the screen.
Avoid displaying a fixed image on the
yy
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
ENG
ENGLISH
Connecting to a PC
14
USING THE MONITOR SET
ENGLISH
ENG
HDMI connection
Connecting to AV Devices
Transmits the digital video and audio signals from
your PC to the Monitor set. Connect the PC and
the Monitor set with the HDMI cable as shown in
the following illustrations.
HDMI connection
Transmits the digital video and audio signals from
your AV devices to the monitor. Connect your AV
device to the monitor with the HDMI cable as illustrated below.
NOTE
If you use HDMI PC, it can cause compatibility
yy
problem.
Use a certified cable with the HDMI logo
yy
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
Recommended HDMI cable types
yy
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
NOTE
When you want to use two PC in our Monitor,
yy
please connect the signal cable(D-SUB/
DVI-D/HDMI) respectively in Monitor set.
If you turn the Monitor set on while it is cold,
yy
the screen may flicker. This is normal.
Some red, green, or blue spots may appear
yy
on the screen. This is normal.
NOTE
If you use HDMI PC, it can cause compatibility
yy
problem.
Use a certified cable with the HDMI logo
yy
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
Recommended HDMI cable types
yy
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
USING THE MONITOR SET
Connecting to External Devices
Connect peripheral devices to the monitor using
headphone ports.
Self Image Setting Function
Press the power button on the bottom panel to
turn the power on. When monitor power is turned
on, the "Self Image Setting" Function is executed
automatically. (Only supported in Analog Mode)
NOTE
NOTE
Peripheral devices are sold separately.
yy
Cables with angled plugs may have clearyy
ance issues, use straight plugs when possible.
Angle Type
Straight Type
NOTE
Headphones or speakers may not work noryy
mally, depending on the server PC settings.
"Self Image Setting" Function.
yy
This function provides the user with optimal
display settings.When the user connects
the monitor for the first time, this function
automatically adjusts the display to optimal
settings for individual input signals.(Only
supported in Analog Mode)
‘AUTO’ Function.
yy
When you encounter problems such as
blurry screen, blurred letters, screen flicker
or tilted screen while using the device or
after changing screen resolution, press the
AUTO function button to improve resolution.
(Only supported in Analog Mode)
ENG
ENGLISH
Peripheral device connection
15
16
CUSTOMIZING SETTINGS
CUSTOMIZING SETTINGS
ENGLISH
ENG
1 Press the desired button on the bottom of the Monitor set.
2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.
To return to the upper menu or set other menu items, use the up arrow (
) button.
3 Select EXIT to leave the OSD menu.
MENU
READER
FUNC.
AUTO
INPUT
EXIT
Monitor set Buttons
Button
Description
Accesses the main menus.(See p.17)
OSD Locked/OSD
Unlocked
This function allow you to lock the current control settings, so that
they cannot be inadvertently changed.
Press and hold the MENU button for several seconds. Then OSD
of “OSD Lock” will appear. After that, user can select lock or unlock
by pressing left/right button.
If user selects the “Lock” icon by pressing the “OK” button, the
message “OSD Locked” will appear. Otherwise, “OSD Unlocked”
will appear. After selecting the “Lock”, If you want to change to
Unlock, you can push the “MENU” button for several seconds. The
message “OSD Unlocked” will appear.
Use this button to enter Reader Mode menu. Its function works to display screen as
paper-like picture for Eye comfort.If you want to more information(See p.23).
Use this button to enter SMART ENERGY SAVING , Picture Mode,Color Weakness
menus.(See p.24~26)
When adjusting your display settings, always press the AUTO button on the MONITOR
SETUP OSD. (Only supported in Analog Mode)
The best display
mode
19M38AB/19M38HB/19M38A/19M38D/19M38H: 1366 x 768
20M38A/20M38D/20M38H: 1600 x 900
22M38A/22M38D/22M38H/24M38A/24M38D/24M38H/27MP38HQ/
27MP38VQ: 1920 x 1080
You can choose the input signal.
• When two input signals are connected, you can select the input signal (D-SUB/DVI-D/
HDMI) you want.
• When only one signal is connected, it is automatically detected. The default setting is
D-SUB.
EXIT
EXIT the OSD(On Screen Display).
(Power Button)
Turns the power on or off.
Power Indicator
The power indicator stays white if the display is running properly (On
Mode). If the display is in Sleep Mode, the power indicator blinks
white.
CUSTOMIZING SETTINGS
17
Customizing Settings
ENG
ENGLISH
Menu Settings
1 Press MENU button on the bottom of the Monitor set
to display the Menu OSD.
2 Set the options by pressing the ◄ or ► or ▼
buttons.
3 Select the "Next Menu" button to enter the more
option settings.
4 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
Each option is explained below.
Menu
Analog Digital
HDMI
Brightness
●
●
●
Contrast
●
●
●
●
●
●
Response Time
27MP38VQ 27MP38HQ
Wide/Original
Description
To adjust the brightness, contrast of the screen.
You can set a response time for displayed pictures based on the
speed of the screen. For a normal environment, it is recommended
that you use 'Off'. For a fast-moving picture, it is recommended that
you use 'High'.
Wide
Switch to full screen mode according to input image signal.
Reset
●
●
●
Original
●
●
●
Restore all factory default settings. Press the◄ , ►buttons to reset
immediately.
Change the input image signal ratio to original.
* This function works only if input resolution is lower than Monitor
set ratio (16:9).
18
CUSTOMIZING SETTINGS
Menu > Next Menu
ENGLISH
ENG
Picture
Analog Digital
Sharpness
●
●
HDMI
Description
●
To adjust the clearness of the screen
●
To set offset level
●
To improve the clarity and stability of the
screen
●
To customize the color of the screen
Black Level
19M38H
20M38H
19M38HB
22M38H
24M38H
27MP38VQ 27MP38HQ
Overscan
19M38H
20M38H
19M38HB
22M38H
24M38H
27MP38VQ 27MP38HQ
Color
Gamma
Color Temp
Six Color
27MP38VQ 27MP38HQ
●
●
Color Reset
27MP38VQ 27MP38HQ
Display
Horizontal
Vertical
Clock
Phase
●
To adjust the position of the screen
●
To improve the clarity and stability of the
screen
Audio
19M38H
20M38H
19M38HB
22M38H
24M38H
Volume
●
To adjust the volume
27MP38VQ 27MP38HQ
Others
Language
Power Indicator
●
●
●
●
●
●
Automatic Standby
19M38H
20M38H
19M38HB
22M38H
24M38H
27MP38VQ 27MP38HQ
Resolution
Analog: D-SUB(Analog signal) input.
yy
Digital: DVI-D(Digital signal) input.
yy
HDMI: HDMI(Digital signal) input.
yy
●
To customize the screen status for a user's
operating environment
CUSTOMIZING SETTINGS
19
Picture
ENG
ENGLISH
1 Press MENU button on the bottom of the Monitor set
to display the Menu OSD.
2 Select the "Next Menu" button to enter the more
option settings.
3 Enter to Picture by pressing the ▼ button.
4 Set the options by pressing the ◄ or ► or ▼
buttons.
5 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
Each option is explained below.
Menu > Next Menu > Picture
Description
Sharpness
To adjust the clearness of the screen.
Black Level
Sets the offset level (for HDMI only).
yy Offset: as a reference for a video signal, this is the darkest color the monitor can
display.
19M38H
20M38H
19M38HB
22M38H
24M38H
27MP38VQ 27MP38HQ
Overscan
19M38H
20M38H
19M38HB
22M38H
24M38H
27MP38VQ 27MP38HQ
High
Keeps the current contrast ratio of the screen.
Low
Lowers the black levels and raises the white levels from the
current contrast ratio of the screen.
To select the range of output image for DTV timing in HDMI input.(only for HDMI
input)Recommend Overscan function to turn on when connect AV equipment.
20
CUSTOMIZING SETTINGS
Color
ENGLISH
ENG
1 Press MENU button on the bottom of the Monitor set
to display the Menu OSD.
2 Select the "Next Menu" button to enter the more
option settings.
3 Select Color by pressing the ► button.
4 Enter to Color by pressing the ▼ button.
5 Set the options by pressing the ◄ or ► or ▼
buttons.
6 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
Each option is explained below.
Menu > Next Menu > Color
Description
Gamma
Set your own gamma value. : Gamma 0, Gamma 1, Gamma 2, Off on
the monitor, high gamma values display blackish images and low gamma
values display whitish images.
If user don't want adjusted gamma, user can select Gamma off.
Color Temp
Custom
• Red:Set your own red color levels.
• Green: Set your own green color levels.
• Blue:Set your own blue color levels.
Select the screen color.
Warm: Set the screen to warm color temperature (more red).
Medium: Set the screen to medium color temperature.
Cool: Set the screen to cool color temperature (more blue).
Six Color
27MP38VQ 27MP38HQ
Color Reset
27MP38VQ 27MP38HQ
Sets and stores the hue and saturation for six colors(Red/Green/Blue/Cyan/
Magenta/Yellow) to satisfy the color requirements of a user.
Hue
Adjusts the screen hue.
Saturation
Adjusts the color sharpness on the screen. Lower values make
the color sharpness weaker and colors lighter while higher
values make the color sharpness stronger and colors dark.
Resets the color settings to the factory default settings for the current input
device.
CUSTOMIZING SETTINGS
21
Display
ENG
ENGLISH
1 Press MENU button on the bottom of the Monitor set
to display the Menu OSD.
2 Select the "Next Menu" button to enter the more
option settings.
3 Select Display by pressing the ► button.
4 Enter to Display by pressing the ▼ button.
5 Set the options by pressing the ◄ or ► or ▼
buttons.
6 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
Each option is explained below.
Menu > Next Menu > Display
Description
Horizontal
To move image left and right.
Vertical
To move image up and down.
Clock
To minimize any vertical bars or stripes visible on the screen background.The
horizontal screen size will also change.
Phase
To adjust the focus of the display. This item allows you to remove any horizontal
noise and clear or sharpen the image of characters.
Audio
19M38H
20M38H
19M38HB
22M38H
24M38H
27MP38VQ 27MP38HQ
1 Press MENU button on the bottom of the Monitor set to display
the Menu OSD.
2 Select the "Next Menu" button to enter the more option
settings.
3 Select Audio by pressing the ► button.
4 Enter to Volume by pressing the ▼ button.
5 Set the options by pressing the ◄ or ► buttons.
6 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items, use the
up arrow ( ) button.
Each option is explained below.
Menu > Next Menu > Audio
Volume
Description
To adjust the volume of headphone/earphone.(Only for HDMI input)
22
CUSTOMIZING SETTINGS
Others
ENGLISH
ENG
1 Press MENU button on the bottom of the Monitor set
to display the Menu OSD.
2 Select the "Next Menu" button to enter the more
option settings.
3 Select Others by pressing the ► button.
4 Enter to Others by pressing the ▼ button.
5 Set the options by pressing the ◄ or ► or ▼
buttons.
6 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
Each option is explained below.
Menu > Next Menu > Others
Description
Language
To choose the language in which the control names are displayed.
Power Indicator
Use this function to set the power indicator on the bottom side of the monitor to On or
Off.If you set Off, it will go off.
If you set On at any time, the power indicator will automatically be turned on.
Automatic Standby
The monitor will automatically switch to standby mode after a certain period.
19M38H
20M38H
19M38HB
22M38H
24M38H
27MP38VQ 27MP38HQ
Resolution
User can set the desired resolution. The function is enabled only when the screen
resolution on your computer is set to the following, except that the PC output wrong
resolution.
19M38A
19M38D
19M38AB
19M38HB
20M38A
22M38A
Off, 1024x768, 1280x768, 1360x768,
1366x768
19M38H
24M38A
27MP38VQ
27MP38HQ
20M38D
22M38D
24M38D
20M38H
22M38H
24M38H
Off, 1024x768, 1280x768, 1360x768,
1366x768
Off, 1280x960, 1600x900
Off, 1440x900, 1600x900
CUSTOMIZING SETTINGS
23
READER Setting
ENG
ENGLISH
1 Press READER button on the bottom of the Monitor
set to display the Reader Mode OSD.
2 Set the options by pressing the ◄ or ► buttons.
3 Select EXIT to leave the OSD menu.
Each option is explained below.
Reader Mode
Description
Reader 1
It is a mode that the screen is adjusted to the best for the newspaper. If you
want screen more bright, you can control brightness in Menu OSD.
Reader 2
It is a mode that the screen is adjusted to the best for the cartoon. If you want
screen more bright, you can control brightness in Menu OSD.
Reader Off
It is a mode that reader mode is off.
NOTE
If option of Reader Mode is Reader 1 or Reader 2, Picture Mode will automatically be Custom and
SMART ENERGY SAVING and Color Weakness will automatically be Off.
24
CUSTOMIZING SETTINGS
FUNC. Setting
ENGLISH
ENG
SMART ENERGY SAVING
1 Press FUNC. button onthe bottom of the Monitor set to
display the FUNC. OSD.
2 Enter to SMART ENERGY SAVING by pressing the ▼
button.
3 Set the options by pressing the ◄ or ► buttons.
4 Select EXIT to leave the OSD menu.To return to the
upper menu or set other menu items, usethe up arrow
(
) button.
Each option is explained below.
SMART ENERGY SAVING
Description
High
Enables SMART ENERGY SAVING you can save energy with this energy- high efficient function.
Low
Enables SMART ENERGY SAVING you can save energy with this energy- low efficient
function.
Off
Disables SMART ENERGY SAVING .
* SMART ENERGY SAVING: Conserve energy by using luminance compensation algorithm.
NOTE
Saving Data depends on the Panel. So,those values should be different from each panel and panel
yy
vendor.If option of SMART ENERGY SAVING is High or Low, monitor luminance become higher or
lower depend on source.
yyIf option of SMART ENERGY SAVING is High or Low, Picture Mode will automatically be Custom and
Reader Mode and Color Weakness will automatically be Off.
CUSTOMIZING SETTINGS
25
ENG
ENGLISH
Picture Mode
1 Press FUNC. button on the bottom of theMonitor set
to display the FUNC. OSD.
2 Select Picture Mode by pressing the ► button. 3 Enter to Picture Mode by pressing the ▼ button.
4 Set the options by pressing the ◄ or ► buttons.
5 Select EXIT to leave the OSD menu.To return to the
upper menu or set other menu items, use the up
arrow(
)button. Each option is explained below.
Picture Mode
Description
Custom
It is a mode that theuser can adjust each element.It can adjust the color mode of the Main Menu.
Text
It is a mode that thescreen is adjusted to the best for the textworks.
Photo
It is a mode that thescreen is adjusted to the best to view pictures.
Cinema
It is a mode that thescreen is adjusted to the best to view the videos.
Game
It is a mode that thescreen is adjusted to the best to play a game.
19M38HB
24M38H
19M38H
20M38H
22M38H
27MP38VQ 27MP38HQ
Picture Mode
Description
Custom
It is a mode that theuser can adjust each element.It can adjust the color mode of the Main Menu.
Vivid 1
Adjusts the video image for the retail environment by enhancing the contrast, brightness, Colour,
and sharpness.
Vivid 2
Standard
Adjusts the image for the normal environment.
Cinema
It is a mode that thescreen is adjusted to the best to view the videos.
NOTE
If option of Picture Mode is non-Custom , Reader Mode, SMART ENERGY SAVING and Color
Weakness will automatically be Off.
26
CUSTOMIZING SETTINGS
Color Weakness
ENGLISH
ENG
1 Press FUNC. button onthe bottom of the Monitor set
to display the FUNC. OSD.
2 Select Color Weakness by pressing the ► button.
3 Enter to Color Weakness by pressing the ▼ button.
4 Set the options by pressing the ◄ or ► buttons.
5 Select EXIT toleave the OSD menu.To return to the
upper menu or set other menu items, usethe up
arrow (
) button.
Each option is explained below.
Color Weakness
Description
On
This mode is for users who cannot distinguish between red and green. It enables
users with color weakness to easily distinguish between the two colors.
Off
It is a mode that Color Weakness mode is off.
NOTE
This is subsidiary for color weakness user. Therefore if you feel uncomfortable with the screen, please
yy
turn off this function.
This function can’t distinguish some colors in some images.
yy
If option of Color Weakness is not Off , Reader Mode and SMART ENERGY SAVING will be Off and
yy
Picture Mode will automatically be Custom.
TROUBLESHOOTING
27
Check the following before calling for service.
No image appears
Is the power cord of the display
connected?
Is the power indicator light on?
Is the power indicator flickering?
Do you see an "OUT OF RANGE"
message on the screen?
Do you see a "NO SIGNAL"
message on the screen?
yy Check and see if the power cord is connected properly to the power
outlet.
yy Press the Power button.
yy If the display is in power saving mode, try moving the mouse or
pressing any key on the keyboard to bring up the screen.
yy Try to turn on the PC.
yy This message appears when the signal from the PC (video card) is
out of horizontal or vertical frequency range of the display. See the
'Specifications' section of this manual and configure your display
again.
yy This is displayed when the signal cable between the PC and the
monitor is missing or disconnected. Check the cable and reconnect it.
Do you see a "OSD LOCKED" message on the screen?
Do you see “OSD LOCKED” when
you push MENU button?
yy You can secure the current control settings, so that they cannot be
inadvertently changed. You can unlock the OSD controls at any time
by pushing the MENU button for several seconds: the message “OSD
UNLOCKED” will appear.
Display image is incorrect
Display Position is incorrect.
On the screen background, vertical
bars or stripes are visible.
Any horizontal noise appearing in
any image or characters are not
clearly portrayed.
yy Press the AUTO button to automatically adjust your display image to
the ideal setting.
yy Press the AUTO button to automatically adjust your display image to
the ideal setting.
yy Press the AUTO button to automatically adjust your display image to
the ideal setting.
yy Check Control Panel ► Display ► Settings and adjust the display
to the recommended resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits (true color).
ENG
ENGLISH
TROUBLESHOOTING
28
TROUBLESHOOTING
CAUTION
ENGLISH
ENG
Check Control Panel ► Display ► Settings and see if the frequency or the resolution were
yy
changed. If yes, readjust the video card to the recommend resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the
yy
screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
The setting method can differ by computer and O/S (Operation System), and resolution mentioned
yy
above may not be supported by the video card performance. In this case, please ask to the computer
or the video card manufacturer.
Display image is incorrect
The screen color is mono or
abnormal.
yy Check if the signal cable is properly connected and use a screwdriver
to fasten if necessary.
yy Make sure the video card is properly inserted in the slot.
yy Set the color setting higher than 24 bits (true color) at Control Panel
► Settings.
The screen blinks.
yy Check if the screen is set to interlace mode and if yes, change it to the
recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display
driver?
yy Be sure to install the display driver from the display driver CD (or
diskette) that comes with your display. Or, you can also download the
driver from our web site: http://www.lg.com.
yy Make sure to check if the video card supports Plug&Play function.
SPECIFICATIONS
19M38A
19M38D
Display
Resolution
Power consumption (Typ.)
Power Input
19M38H
Screen Type
19M38AB
19M38HB
Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Pixel Pitch
0.3 mm x 0.3 mm (Pixel Pitch)
Max
1366 x 768 @ 60 Hz
Recommend
VESA 1366 x 768 @ 60 Hz
On Mode : 13 W (ENERGY STAR® standard)*
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
19 V
0.8 A
AC-DC Adapter
Type ADS-18SG-19-3 19016G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPG, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPI, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPCU, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPB, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016EPCU-L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP42, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-U, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP60-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
Dimensions
(Width x Height x
Depth)
Weight
With Stand
Without Stand
OUTPUT: 19 V
0.84 A
441.3 mm x 350.2 mm x 167.8 mm
441.3 mm x 278.1 mm x 57.3 mm
19M38A
19M38H
19M38D
1.9 kg
19M38AB
19M38HB
2.1 kg
Tilt Range
-5° to 20°
Environmental
conditions
Operating Temperature 0°C to 40 °C
Operating Humidity
≤ 80%
Storage Temperature
Storage Humidity
-20°C to 60 °C
≤ 85%
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
ENG
ENGLISH
‌SPECIFICATIONS
29
30
SPECIFICATIONS
ENGLISH
ENG
Video Signal
19M38A
19M38AB
19M38D
19M38H
19M38HB
Horizontal
Frequency
30 kHz to 83 kHz (Automatic)
30 kHz to 61 kHz (Automatic)
●
●
●
Vertical
Frequency
56 Hz to 75 Hz (D-SUB)
●
●
●
56 Hz to 75 Hz (DVI-D)
●
56 Hz to 75 Hz (HDMI)
Synchronization Separate Sync.
Digital
Input Connector
15 pin D-SUB Connector
DVI-D Connector (Digital)
HDMI Connector
●
●
●
●
●
●
●
●
●
●
●
SPECIFICATIONS
20M38A
20M38D
Display
Resolution
Power consumption (Typ.)
Power Input
AC-DC Adapter
20M38H
Screen Type
Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Pixel Pitch
0.271 mm x 0.262 mm (Pixel Pitch)
Max
1600 x 900 @ 60 Hz
Recommend
VESA 1600 x 900 @ 60 Hz
On Mode : 16 W (ENERGY STAR® standard)*
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
19 V
0.8 A
Type ADS-18SG-19-3 19016G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPG, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPI, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPCU, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPB, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016EPCU-L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP42, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-U, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP60-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
OUTPUT: 19 V
0.84A
Dimensions
(Width x Height x
Depth)
With Stand
463.0 mm x 358.8 mm x 167.8 mm
Without Stand
463.0 mm x 286.5 mm x 57.4 mm
Weight
2.0 kg
Tilt Range
-5° to 20°
Environmental
conditions
Operating Temperature 0°C to 40 °C
Operating Humidity
≤ 80%
Storage Temperature
Storage Humidity
-20°C to 60 °C
≤ 85%
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
ENG
ENGLISH
‌SPECIFICATIONS
31
32
SPECIFICATIONS
ENGLISH
ENG
Video
Signal
Horizontal
Frequency
30 kHz to 83 kHz (Automatic)
30 kHz to 61 kHz (Automatic)
Vertical Frequency 56 Hz to 75 Hz (D-SUB)
20M38A
20M38D
20M38H
●
●
●
●
●
●
56 Hz to 75 Hz (DVI-D)
●
56 Hz to 75 Hz (HDMI)
Synchronization
Input Connector
●
Separate Sync.
Digital
●
15 pin D-SUB Connector
●
DVI-D Connector (Digital)
HDMI Connector
●
●
●
●
●
●
●
●
SPECIFICATIONS
22M38A
22M38D
Display
Resolution
Power consumption (Typ.)
22M38H
Screen Type
Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Pixel Pitch
0.248 mm x 0.248 mm (Pixel Pitch)
Max
1920 x 1080 @ 60 Hz
Recommend
VESA 1920 x 1080 @ 60 Hz
22M38A
On Mode : 19 W (ENERGY STAR® standard)*
22M38D
On Mode : 23 W (Outing condition)**
22M38H
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
Power Input
19 V
AC-DC Adapter
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSG-19 19025EPCU-1L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP51, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type PA-1021-23, manufactured by Lite-On Technology Corporation
1.2 A
OUTPUT: 19 V
Dimensions
(Width x Height x
Depth)
Weight
1.3 A
With Stand
508.5 mm x 386.5 mm x 186.7 mm
Without Stand
508.5 mm x 315.7 mm x 56.8 mm
22M38A
22M38D
22M38H
2.4 kg
2.7 kg
Tilt Range
-5° to 20°
Environmental
conditions
Operating Temperature 0°C to 40 °C
Operating Humidity
≤ 80%
Storage Temperature
Storage Humidity
-20°C to 60 °C
≤ 85%
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The On mode power consumption is measured with LGE test standard(Full White pattern , Maximum
resolution)
ENG
ENGLISH
‌SPECIFICATIONS
33
34
SPECIFICATIONS
ENGLISH
ENG
Video
Signal
Horizontal
Frequency
30 kHz to 83 kHz (Automatic)
30 kHz to 61 kHz (Automatic)
Vertical Frequency 56 Hz to 75 Hz (D-SUB)
22M38A
22M38D
22M38H
●
●
●
●
●
●
56 Hz to 75 Hz (DVI-D)
●
56 Hz to 75 Hz (HDMI)
Synchronization
Input Connector
●
Separate Sync.
Digital
●
15 pin D-SUB Connector
●
DVI-D Connector (Digital)
HDMI Connector
●
●
●
●
●
●
●
●
SPECIFICATIONS
24M38A
24M38D
Display
Resolution
Power consumption (Typ.)
Power Input
AC-DC Adapter
24M38H
Screen Type
Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Pixel Pitch
0.272 mm x 0.272 mm (Pixel Pitch)
Max
1920 x 1080 @ 60 Hz
Recommend
VESA 1920 x 1080 @ 60 Hz
On Mode : 19 W (ENERGY STAR® standard)*
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
19 V
1.2 A
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSG-19 19025EPCU-1L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP51, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type PA-1021-23, manufactured by Lite-On Technology Corporation
OUTPUT: 19 V
1.3 A
Dimensions
(Width x Height x
Depth)
With Stand
556.2 mm x 415.1 mm x 186.7 mm
Without Stand
556.2 mm x 344.0 mm x 56.8 mm
Weight
2.8 kg
Tilt Range
-5° to 20°
Environmental
conditions
Operating Temperature 0°C to 40°C
Operating Humidity
≤ 80%
Storage Temperature
Storage Humidity
-20°C to 60 °C
≤ 85%
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
ENG
ENGLISH
‌SPECIFICATIONS
35
36
SPECIFICATIONS
ENGLISH
ENG
Video
Signal
Horizontal
Frequency
30 kHz to 83 kHz (Automatic)
30 kHz to 61 kHz (Automatic)
Vertical Frequency 56 Hz to 75 Hz (D-SUB)
24M38A
24M38D
24M38H
●
●
●
●
●
●
56 Hz to 75 Hz (DVI-D)
●
56 Hz to 75 Hz (HDMI)
Synchronization
Input Connector
●
Separate Sync.
Digital
●
15 pin D-SUB Connector
●
DVI-D Connector (Digital)
HDMI Connector
●
●
●
●
●
●
●
●
SPECIFICATIONS
37
‌SPECIFICATIONS
Display
Resolution
Power consumption (Typ.)
Power Input
AC-DC Adapter
Screen Type
Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Pixel Pitch
0.311 mm x 0.311 mm (Pixel Pitch)
Max
1920 x 1080 @ 60 Hz
Recommend
VESA 1920 x 1080 @ 60 Hz
On Mode : 20.3 W Typ. (ENERGY STAR® standard)*
28.3 W Typ.(Outgoing condition)**
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
19 V
1.6 A
Type ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-32FSG-19 19032EPCU-1L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP51A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type PA-1031-23, manufactured by Lite-On Technology Corporation
OUTPUT: 19 V
1.7 A
Dimensions
(Width x Height x
Depth)
With Stand
641.4 mm x 459.7 mm x 203.0 mm
Without Stand
641.4 mm x 393.0 mm x 48.2 mm
Weight
4.4 kg
Tilt Range
-5° to 20°
Environmental
conditions
Operating Temperature 0°C to 40 °C
Operating Humidity
≤ 80%
Storage Temperature
Storage Humidity
-20°C to 60 °C
≤ 85%
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
**The On mode power consumption is measured with LGE test standard(Full White pattern,Maximum
resolution).
ENG
ENGLISH
27MP38HQ 27MP38VQ
38
SPECIFICATIONS
ENGLISH
ENG
Video Signal
27MP38VQ
Horizontal
Frequency
30 kHz to 83 kHz (Automatic)
30 kHz to 61 kHz (Automatic)
●
●
Vertical
Frequency
56 Hz to 75 Hz (D-SUB)
●
●
Synchronization
Input Connector
27MP38HQ
56 Hz to 75 Hz (DVI-D)
56 Hz to 75 Hz (HDMI)
Separate Sync.
Digital
15 pin D-SUB Connector
●
●
●
●
●
●
●
●
DVI-D Connector (Digital)
HDMI Connector
●
●
●
●
SPECIFICATIONS
39
Preset Modes (Resolution)
ENG
ENGLISH
D-SUB/DVI-D Timing
19M38A
19M38D
19M38H
19M38AB
19M38HB
Display Modes (Resolution)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Polarity(H/V)
720 x 400
31.468
70
-/+
640 x 480
31.469
60
-/-
640 x 480
37.500
75
-/-
800 x 600
37.879
60
+/+
800 x 600
46.875
75
+/+
832 x 624
49.725
75
-/-
1024 x 768
48.363
60
-/-
1366 x 768
47.712
60
+/+
20M38A
20M38D
Recommend Mode
20M38H
Display Modes (Resolution)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Polarity(H/V)
720 x 400
31.468
70
-/+
640 x 480
31.469
60
-/-
640 x 480
37.500
75
-/-
800 x 600
37.879
60
+/+
800 x 600
46.875
75
+/+
1024 x 768
48.363
60
-/-
1024 x 768
60.023
75
+/+
1152 x 864
67.500
75
+/+
1600 x 900
60.000
60
+/+
22M38A
22M38D
22M38H
24M38A
24M38D
24M38H
Recommend Mode
27MP38HQ 27MP38VQ
Display Modes (Resolution)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Polarity(H/V)
720 x 400
31.468
70
-/+
640 x 480
31.469
60
-/-
640 x 480
37.500
75
-/-
800 x 600
37.879
60
+/+
800 x 600
46.875
75
+/+
1024 x 768
48.363
60
-/-
1024 x 768
60.023
75
+/+
1152 x 864
67.500
75
+/+
1280 x 1024
63.981
60
+/+
1280 x 1024
79.976
75
+/+
1680 x 1050
65.290
60
-/+
1920 x 1080
67.500
60
+/+
Recommend Mode
40
SPECIFICATIONS
HDMI Timing
ENGLISH
ENG
19M38H
20M38H
Factory support mode
(Preset Mode)
19M38HB
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
HDMI
480P
31
60
O
576P
31.25
50
O
720P
37.50
50
O
720P
45.00
60
O
22M38H
24M38H
Factory support mode
(Preset Mode)
27MP38VQ 27MP38HQ
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
HDMI
480P
31.50
60
O
576P
31.25
50
O
720P
37.50
50
O
720P
45.00
60
O
1080P
56.25
50
O
60
O
Recommend Mode
1080P
67.50
Indicator
Mode
LED Color
On Mode
White
Sleep Mode
Blinking White
Off Mode
Off
IMPORTANT PRECAUTIONS
1
This unit has been engineered and manufactured to ensure your personal safety, however improper
use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all
safeguards incorporated in this display, observe the following basic rules for its installation, use, and
servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is
certified by the applicable national standards if not being provided by the supplier. If the power cable is
faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a
replacement.
The appliance coupler is used as the disconnect device.
Please make sure the device is installed near the wall outlet to which it is connected and that the outlet is
easily accessible.
Operate the display only from a power source indicated in the specifications of this manual or listed on the
display. If you are not sure what type of power supply you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs.
They may result in a shock or fire hazard. Call your service technician for replacement.
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even
if the unit is turned off.
Do not Open the Display:
There are no user serviceable components inside.
yy
There are Dangerous High Voltages inside, even when the power is OFF.
yy
Contact your dealer if the display is not operating properly.
yy
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
yy
Use only a stand recommended by the manufacturer.
yy
Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the
yy
product screen.
It can cause injury to human, problem to product and damage the display.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period of time. Never leave
yy
the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet openings. Some internal
yy
parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
yy
When the display is to be left unattended for an extended period of time, unplug it from the wall outlet.
yy
In the presence of thunder and lightning, never touch the power cord and signal cable because it can
yy
be very dangerous. It can cause electric shock.
ENG
ENGLISH
IMPORTANT PRECAUTIONS
IMPORTANT PRECAUTIONS
2
On Installation
Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
yy
Place the display in a built-in enclosure unless proper ventilation is provided.
yy
Cover the openings with cloth or other material.
yy
Place the display near or over a radiator or heat source.
yy
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the
Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used
under any mode except the recommended resolution, some scaled or processed images may appear on
the screen. However, this is characteristic of the fixed-resolution LCD panel.
Displaying a still image for long time on the monitor may leave persistent image or stain on the monitor
screen. To avoid this problem, use a screen saver and power off when this product is not used. Persistent
image or stain caused by long time usage are not covered by the warranty on this product.
Do not shock or scratch the front and sides of the screen with metallic objects.
Otherwise, it may cause damage to the screen.
Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the
damaged product can cause electric shock or fire. Contact an authorized the service center for repair.
Avoid high temperatures and humidity.
Do not install this product on a wall if it could be exposed to oil or oil mist.
This may damage the product and cause it to fall.
yy
For displays with glossy bezels the user should consider the placement of the display as the bezel may
cause disturbing reflections from surrounding light and bright surfaces.
Do not use products using high voltage around the Monitor. (ex. Electrical Swatter)
Monitor may have malfunction as its electrical shock.
yy
Precautions to the AC Adapter and Power
If water or any foreign substance goes inside the product (TV, monitor, power cord, or AC adapter),
disconnect the power cord immediately and contact the service center.
Otherwise, this may cause a fire or electric shock due to damage to the product.
yy
Do not touch the power plug or AC adapter with wet hands. If the pins of the plug are wet or dusty, wipe and
dry them before use.
Otherwise, this may cause a fire or electric shock.
yy
ENG
ENGLISH
Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power
cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during
operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard.
IMPORTANT PRECAUTIONS
3
ÁGUA
On Cleaning
Unplug the display before cleaning the face of the display screen.
yy
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because
yy
over-spraying may cause electrical shock.
When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent
yy
scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An
‫םימ‬
electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol)
Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction
yy
only. Too much moisture may cause staining.
On Repacking
Do not throw away the carton and packing materials. They make an ideal container in which to
yy
transport the unit. When shipping the unit to another location, repack it in its original material.
On Disposal(Only, LCD Monitor with Hg lamp)
The fluorescent lamp used in this product contains a small amount of mercury.
yy
Do not dispose of this product with general household waste.
yy
Disposal of this product must be carried out in accordance to the regulations of your local authority.
yy
ENG
ENGLISH
Make sure to completely insert the power cord into the AC adapter.
If loosely connected, the poor connection may cause a fire or electric shock.
yy
Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc.
The use of non-approved products may cause a fire or electric shock.
yy
When unplugging the power cord, always pull it by the plug. Do not bend the power cord with excessive
force.
The power line can be damaged, which may cause electric shock or fire.
yy
Be careful not to step or place heavy objects (electronic appliances, clothing, etc.) on the power cord or AC
adapter. Be careful not to damage the power cord or AC adapter with sharp objects.
Damaged power cords may cause a fire or electric shock.
yy
Never disassemble, repair or modify the power cord or AC adapter.
This may cause a fire or electric shock.
yy
Be sure to keep the outlet, AC adapter, and pins of the power plug clean from dust and etc.
This may cause a fire.
yy
DDC(Display Data Channel)
ENGLISH
DDC (Display Data Channel)
DDC is a communication channel over which
the monitor automatically informs the host
system (PC) about its capabilities.
DDC protocol
① DDC1/DDC2B
An uni-directional communication channel.
② DDC 2AB/DDC2B+/DDC2Bi
A bi-directional communication channel.
Note
• PC must support DDC functions to do this.
E-DDC (Enhanced DDC)
A protocol based on I²C and used on a bidirectional data channel between the display
and host. This protocol accesses devices at I²C
address of A0/A1 as well as the address 60.
The 60 address is used as a segment register
to allow larger amounts of data to be retrieved
than is possible using DDC2B protocols. The
protocol is compatible with DDC2B protocols.
4
Energy saving Design
ENGLISH
Energy Saving Design
This program is designed to have computer
equipment manufacturers build circuitry into
their products to reduce power consumption
when it is not in operation.
When this monitor is used with a PC on
which a screen blanking software complying
with the VESA Display Power Management
Signalling (DPMS) Protocol is installed, it can
conserve significant energy by reducing power
consumption when it is not in operation.
There are 2 signal lines, 3 modes of operation.
: On Mode, Sleep Mode, Off Mode.
Mode
Definition
On
mode
The normal operation.
When the monitor is on mode,
being connected to a power
source, it displays an image.
Sleep
Mode
The reduced power state.
returns to on mode when the
user moves the mouse or
presses a key on the keyboard.
Off
Mode
The lowest power consumption
state.
returns to on mode when the
user pushes a power switch.
Note
• The energy saving Design monitors only work
while connected to the computers that have
energy saving features.
5
Service
ENGLISH
Service
Unplug the monitor from the wall outlet and
refer servicing to qualified service personnel
when :
The power cord or plug is damaged or
yy
frayed.
Liquid has been spilled into the monitor.
yy
The monitor has been exposed to rain or
yy
water.
The monitor does not operate normally
yy
following the operating instructions. Adjust
only those controls that are covered in
the operating instructions. An improper
adjustment of other controls may result in
damage and often requires extensive work
by a qualified technician to restore the
monitor to normal operation.
The monitor has been dropped or the cabinet
yy
has been damaged.
The monitor exhibits a distinct change in
yy
performance.
Snapping or popping from the monitor is
yy
continuous or frequent while the monitor is
operating. It is normal for some monitors to
make occasional sounds when being turned
on or off, or when changing video modes.
Do not attempt to service the monitor yourself,
as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
6
REGULATORY
INFORMATION
Please read this manual carefully before operating
your set and retain it for future reference.
www.lg.com
8
INFORMATION FOR ENVIRONMENTAL
PRESERVATION
English
Information for Environmental
Preservation
LGE. announced the ‘LG Declaration for a Cleaner
Environment’ in 1994, and this ideal has served
as a guiding managerial principle ever since. The
Declaration is a foundation that has allowed us to
undertake environmentally friendly activities in careful
consideration of economic, environmental, and social
aspects.
We promote activities for environmental preservation,
and we specifically develop our products to embrace the
concept of environment-friendly.
We minimize the hazardous materials contained in our
products. For example, there is no cadmium to be found
in our product.
Information for recycling
This product may contain parts which could be
hazardous to the environment. It is important that this
product be recycled after use.
LGE. handles all waste product through an
environmentally acceptable recycling method. There
are several take-back and recycling systems currently
in operation worldwide. Many parts will be reused and
recycled, while harmful substances and heavy metals are
treated by an environmentally friendly method.
If you want to find out more information about our
recycling program, please contact your local LG vendor
or a corporate representative of LG.
We set our vision and policies on a cleaner world by
selecting the issue of the global environment as a task
for corporate improvement. Please visit our website for
more
information about our ‘green’ policies.
http://www.lg.com/global/sustainability/environment/
take-back-recycling.jsp
9
WEEE
ENGLISH
Disposal of your old appliance
1 This crossed-out wheeled bin symbol indicates that
waste electrical and electronic products (WEEE)
should be disposed of separately from the municipal
waste stream.
2 Old electrical products can contain hazardous
substances so correct disposal of your old appliance
will help prevent potential negative consequences
for the environment and human health. Your old
appliance may contain reusable parts that could be
used to repair other products, and other valuable
materials that can be recycled to conserve limited
resources.
3 You can take your appliance either to the shop where
you purchased the product, or contact your local
government waste office for details of your nearest
authorised WEEE collection point. For the most
up to date information for your country please see
www.lg.com/global/recycling
10
INDIA ONLY
Disposal of your old appliance (as per e-waste Rules)
1. When this crossed out wheeled bin symbol is depicted on the product and its operator’s manual, it means
the product is covered by the e-waste Management and Handling Rules , 2011 and are meant to be recycled,
dismantled, refurbished or disposed off.
2. Do’s :
a. The product is required to be handed over only to the authorized recycler for disposal.
b. Keep the product in isolated area, after it becomes non-functional/unrepairable so as to prevent its accidental
ROMÂNĂ
breakage.
Don’t :
a. The product should not be opened by the user himself/herself, but only by authorized service personnel.
b. The product is not meant for re-sale to any unauthorized agencies/scrap dealer/kabariwalah.
c. The product is not meant for mixing into household waste stream.
d. Do not keep any replaced spare part(s) from the product in exposed area.
3. Any disposal through unauthorized agencies/person will attract action under Environment (Protection) Act 1986.
4. “This product is complied with the requirement of Hazardous Substances as specified under Rule 13 (1) & (2) of the
E-Waste(Management & Handling) Rules, 2011”.
5. To locate a nearest collection centre or call for pick-up (limited area only) for disposal of this appliance, please
contact Toll Free No. 1800-315-9999 / 1800-180-9999 for details. All collection centre and pick up facilities are
done by third parties with LG Electronics India Pvt. Ltd. Merely as a facilitator.
For more detailed information, please visit : http://www.lge.com/in.
11
i;kZoj.kh; tkudkjh
1. ज
ब इस काटे गए पहिये वाले बिन का चिन्ह किसी उपकरण और इसके ओपेरटर की पुस्तिका के साथ संलग्न होता है तो
इसका मतलब है कि इसे “ई- अपशिष्ट “(प्रबंधन और हथालन ) नियम २०११ के अंतरत
्ग सम्मिलित किया गया है ,
और इसे नवीनीकरणकरन ,विघटन और निपटान के लिए बनाया गया है ।
2. क
रें :
क. उपकरण को सिर्फ अधिकृत पुनः नवीनीकरणकर्ता को ही निपतारण करने हे तु हस्तांतरित करें ।
ख. जब उपकरण कार्यरत न हो इसे अलग क्षेत्र में रखें ताकि उपकरण से होने वाली दर्घ
ु टनाओ से बचा जा सके ।
ROMÂNĂ
न करें :
क. इस उपकरण को स्वयं/खद
ु नहीं खोलना चाहिए ! उपकरण को केवल अधिकृत अधिकारी के द्वारा ही खोला जाना
चाहिए ।
ख. इस उपकरण को पन
ु ः बिक्री के लिए किसी भी कबाड़ीवाला / भंगार-वाला / अनाधिकृत संस्था को न दें ।
ग. इस उपकरण को किसी घरे लू अपशिष्ट सामान के साथ मिलाकर न रखें ।
घ. उपकरण के बदले हुए या आतंरिक परु जो को खल
ु े क्षेत्र में न रखें ।
3. य
दि किसी अनाधिकृत विभाग या व्यक्ति के द्वारा निपटारन किया जाता है तो यह पर्यावरण (सुरक्षा) धारा १९८६ के
अंतरत
्ग आता है ।
4. य
ह उत्पाद ई-अपशिष्ट (प्रबंधन और हथालन) नियम 2011 के अन्तर्गत 13(1) एवं (2) के तहत निर्दिष्ट खतरनाक
पदार्थो की आवश्‍यकता का पालन करता है
5. उ
परोक्त पदार्थो के निपटारन के लिए नजदीकी निपटारन संसथान (संकीर्ण क्षेत्र )में कॉल करें । अधिक जानकारी के लिए
हमारे टोल फ्री नंबर 1800-315-9999 / 1800-180-9999 पर कॉल करें . सभी संग्रहण केंद्र व पिक-अप की सवु िधाएं
किसी थर्ड- पार्टी जो LG Electronics India Pvt. Ltd. को अपनी सेवाएं प्रदान कर रही हों, से करवाएं ।
ज्यादा जानकारी के लिए दे खें वेब:साईट : http://www.lge.com/in
PROPER POSTURE
41
ENG
ENGLISH
PROPER POSTURE
Proper posture for using the Monitor set.
Adjust the
Monitor set and
your posture to
allow you to view
images at the
optimal viewing
angle.
Place your hands
gently on the
keyboard, keeping
your arms bent at
the elbows and
horizontally outright.
Adjust the location of the
Monitor set to avoid it
reflecting light.
LED Monitor*
19M38A
19M38D
19M38H
19M38AB
a
20M38A
20M38D
20M38H
19M38HB
22M38A
22M38D
22M38H
19M38D
20M38D
22M38D
24M38D
27MP38VQ
22M38A
22M38D
22M38H
24M38A
24M38D
24M38H
24M38A
24M38D
24M38H
27MP38VQ
27MP38HQ
19M38HB
19M38H
20M38H
22M38H
24M38H
27MP38VQ
27MP38HQ
+
or
19M38A
19M38D
19M38H
19M38AB
b
20M38A
20M38D
20M38H
19M38HB
27MP38VQ 27MP38HQ
www.lg.com
Depending on country
Unpacking
Check your product box for the following items. If there are
any missing accessories, contact the local dealer where
you purchased your product. The illustrations in this
manual may differ from the actual product and item.
MBM64536741
*Image may vary depending on models.
P/No: MBM64536741 (1608-REV00)
English
It is recommend that use the supplied components.
1
1
2
3
4
2
27MP38VQ
27MP38HQ
Monitor
Monitor
19M38A
19M38D
19M38H
19M38AB
20M38A
20M38D
20M38H
19M38HB
22M38A
22M38D
22M38H
24M38A
24M38D
24M38H
Proper handling instruction
19M38A
22M38A
20M38A
24M38A
20M38H
27MP38HQ
19M38H
24M38H
22M38H
HDMI IN
19M38AB
19M38D
22M38D
19M38HB
20M38D
24M38D
27MP38VQ
HDMI IN
Note : All connection cables shown in the picture are not included along with the monitor set.
English
• Make sure to use the supplied cable. Otherwise, this may cause the device to malfunction.
or
*Image may vary depending on models.
Declaration of Conformity
Trade Name: LG
Model : 19M38A, 19M38D, 19M38H, 19M38AB,
19M38HB, 20M38A, 20M38D, 20M38H,
22M38A, 22M38D, 22M38H, 24M38A,
24M38D, 24M38H, 27MP38HQ,
27MP38VQ
Responsible Party: LG Electronics Inc.
Address : 1000 Sylvan Ave. Englewood Cliffs
NJ 07632 U.S.A
TEL: 201-266-2534
*above information is only for USA FCC Regulatory
Make sure to read the Safety Precautions before
using the product.
Keep the Owner’s Manual (CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
Download PDF