LG | 20MK400H-B | LG 20MK400H-B Owner’s Manual

OWNER'S MANUAL
LED LCD Monitor
(LED Monitor*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
Please read this manual carefully before operating your set and
retain it for future reference.
LED LCD MONITOR MODEL
20MK4 series
22MK4 series
24MK4 series
27MK4 series
www.lg.com
2
CONTENTS
ENGLISH
LICENSE----------------------------- 3
ASSEMBLING AND PREPARING-- 4
--Product Components----------------------------Supported Drivers and Software----------------Component and Button Description----------How to Use the Joystick Button
Input Connector
--Moving and Lifting the Monitor-----------------Setting up the Monitor set -------------------Attaching the Stand Base
Mounting on a table
Mounting on a wall
USING THE MONITOR SET-------
4
5
6
8
9
14
--Connecting to a PC---------------------------- 14
D-SUB connection
HDMI connection
--Connecting to AV Devices--------------------- 15
HDMI connection
--Connecting Peripherals------------------------ 15
Connecting Headphones
CUSTOMIZING SETTINGS-------
16
TROUBLESHOOTING-------------
21
‌SPECIFICATIONS-----------------
22
--Preset Modes (Resolution)-------------------- 26
PROPER POSTURE --------------- 27
- Proper Posture ----------------------------------- 27
3
ENG
ENGLISH
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the
United States and other countries.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
4
ASSEMBLING AND PREPARING
ENGLISH
ENG
( Images may vary depending on models)
Product Components
Please check whether all the components are included in the box before using the product. If there are missing
components, contact the retail store where you purchased the product. Note that the product and components may
look different from those shown here.
CD(Owner's Manual) /
Card
( Depending on the country )
HDMI Cable
( Depending on the country )
D-SUB Cable
( Depending on the country )
or
Power Cord
AC-DC Adapter
( Depending on the country )
AC-DC Adapter
( Depending on the country )
20MK4 series 22MK4 series 24MK4 series
2 Screws
Stand Base
Stand Body
27MK4 series
Stand Base
Stand Body
5
CAUTION
NOTE
Note that the components may look different from those shown here.
yy
Without prior notice, all information and specifications in this manual are subject to change to improve the
yy
performance of the product.
To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store
yy
where you purchased the product.
Supported Drivers and Software
Check the drivers and software supported by your product and refer to the manuals on the CD enclosed in the product
package.
Installation Priority
20MK4 series
22MK4 series
24MK4 series
27MK4 series
Monitor Driver
Recommended
O
OnScreen Control
Recommended
O
Drivers and Software
Required and Recommended: You can download and install the latest version from the enclosed CD or from the
yy
LGE website (www.lg.com).
Optional: You can download and install the latest version from the LGE website (www.lg.com).
yy
ENG
ENGLISH
Always use genuine components to ensure safety and product performance.
yy
The product warranty will not cover damage or injury caused by the use of counterfeit components.
yy
It is recommend that use the supplied components.
yy
If you use generic cables not certified by LG, the screen may not display or there may be image noises.
yy
6
Component and Button Description
( Images may vary depending on models)
ENGLISH
ENG
Joystick Button
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your
finger.
Basic Functions
◄/►
Power on
Press the joystick button once with your finger to turn on the
monitor.
Power off
Press and hold the joystick button once with your finger to turn off the
monitor.
Volume
Control
You can control the volume by moving the joystick button left/right.
(for HDMI only)
NOTE
The joystick button is located at the bottom of the monitor.
yy
7
Input Connector
ENG
ENGLISH
( Images may vary depending on models)
Connection panel (See p.14~15)
8
Moving and Lifting the Monitor
ENGLISH
ENG
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched
or damaged and to ensure safe transportation regardless of its shape or size.
CAUTION
As far as possible, avoid touching the monitor screen.
yy
This may result in damage to the screen or some of
the pixels used to create images.
It is advisable to place the monitor in the original box
yy
or packing material before attempting to move it.
Before moving or lifting the monitor, disconnect the
yy
power cord and all cables.
Hold the top and bottom of the monitor frame firmly.
yy
Do not hold the panel itself.
( Images may vary depending on models)
If you use the monitor panel without the stand
yy
base, its joystick button may cause the monitor to
become unstable and fall, resulting in damage to
the monitor or human injury. In addition, this may
cause the joystick button to malfunction.
When holding the monitor, the screen should face
yy
away from you to prevent it being scratched.
When moving the monitor, avoid any strong shock or
yy
vibrations to the product.
When moving the monitor, keep it upright, never turn
yy
the monitor on its side or tilt it sideways.
9
Setting up the Monitor set
( Images may vary depending on models)
4 Tighten the screw to the right with a coin.
20MK4 series
22MK4 series
24MK4 series
1 Place the Monitor set with the screen side
down on a flat and cushioned suface.
CAUTION
Ÿ To protect the screen from scratches, cover the
surface with a soft cloth.
27MK4 series
1 Place the Monitor set with the screen side
down on a flat and cushioned suface.
2 Attach the Stand Body to the monitor set.
CAUTION
3 Tighten the screw.
Ÿ To protect the screen from scratches, cover the
surface with a soft cloth.
2 Attach the Stand Body to the monitor set.
screw torque :10~12kgf
ENG
ENGLISH
Attaching the Stand Base
10
3 Tighten the screw.
WARNING
ENGLISH
ENG
To avoid injury to the fingers and foot when
yy
Assembly Stand Body and Base, should hold Base
when assembly stand body and base.
CAUTION
screw torque :10~12kgf
4 Tighten the screw to the right with a coin.
Illustrations in this document represent typical
yy
procedures, so they may look different from the
actual product.
Do not carry the monitor upside down by just
yy
holding the stand base. This may cause the
monitor to fall off the stand and could result in
personal injury.
When lifting or moving the monitor, do not touch
yy
the monitor screen. The force applied to the
monitor screen may cause damage to it.
Do not apply foreign substances (oils, lubricants,
yy
etc.) to the screw parts when assembling the
product. (Doing so may damage the product.)
Applying excessive force when tightening screws
yy
may cause damage to the monitor. Damage caused
in this way will not be covered by the product
warranty.
NOTE
You can disassemble the stand in the reverse
yy
order of the assembly.
11
Mounting on a table
( Images may vary depending on models)
on a table.
Leave a 100 mm (minimum) space from the wall for
proper ventilation.
100 mm
100 mm
100 mm
2 Connect the AC-DC Adapter and Power Cord to a
or
monitor to turn on the monitor.
CAUTION
Unplug the power cord prior to moving or installing the
yy
monitor. There is risk of electric shock.
100 mm
wall outlet.
3 Press the joystick button on the bottom of the
ENG
ENGLISH
1 Lift and tilt the Monitor set into its upright position
12
WARNING
ENGLISH
ENG
When you adjust the angle, do not hold the bottom
of the Monitor set frame as shown on the following
illustration, as may injure your fingers.
NOTE
The angle of the screen can be adjusted forward or
backward from -5° to 20° for a comfortable viewing
experience.
20
Do not touch or press the screen when adjusting the
angle of the monitor.
Front
Rear
Using the Kensington security system
Do not hold this set like below picture.Monitor
screen can detach from stand base and injure your
body.
The Kensington security system connector is located at the
back of the Monitor set. For more information of installation
and using, refer to the manual supplied with the Kensington
security system or visit http://www.kensington.com .
Connect the Kensington security system cable between the
Monitor set and a table.
NOTE
The Kensington security system is optional. You can
yy
obtain it from most electronics stores.
13
Mounting on a wall
Wall Mount (A x B)
yy
( Images may vary depending on models)
100 mm
100 mm
100 mm
100 mm
If you intend to mount the Monitor set to a wall, attach
Wall mounting interface (optional parts) to the back of
the set.
When you install the Monitor set using a wall mounting
interface (optional parts), attach it carefully so it will not
drop.
1 If you use screw longer than standard, the monitor
might be damaged internally.
2 If you use improper screw, the product might be damaged and drop from mounted position.
In this case, LG Electronics is not responsible for it.
Model
20MK4 series 22MK4 series
24MK4 series
Wall Mount (A x B)
Standard screw
Number of screws
75 x 75
M4
4
Model
27MK4 series
Wall Mount (A x B)
Standard screw
Number of screws
100 x 100
M4
4
A
B
ENG
ENGLISH
For proper ventilation, allow a clearance of 100 mm on
each side and from the wall. Detailed
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
CAUTION
Disconnect the power cord first, and then move
yy
or install the Monitor set. Otherwise electric
shock may occur.
If you install the Monitor set on a ceiling or
yy
slanted wall, it may fall and result in severe
injury.
Use only an authorized LG wall mount and
yy
contact the local dealer or qualified personnel.
Do not over tighten the screws as this may
yy
cause damage to the Monitor set and void your
warranty.
Use only screws and wall mounts that meet
yy
the VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.
Screw length from outer surface of back cover
yy
should be under 8mm.
Wall mount Pad
Back Cover
Wall mount Pad
Back Cover
Standard screw
Max.8mm
NOTE
Use the screws that are listed on the VESA
yy
standard screw specifications.
The wall mount kit will include an installation
yy
manual and necessary parts.
The wall mount bracket is optional. You can
yy
obtain additional accessories from your local
dealer.
The length of screws may differ depending on
yy
the wall mount. Be sure to use the proper length.
For more information, refer to the instructions
yy
supplied with the wall mount.
14
USING THE MONITOR SET
ENGLISH
Connecting to a PC
Your Monitor set supports Plug & Play*.
yy
*Plug & Play: A PC recognizes a connected device
that users connect to a PC and turn on, without
device configuration or user intervention.
HDMI connection
Transmits the digital video and audio signals from
your PC to the Monitor set. Connect the PC and the
Monitor set with the HDMI cable as shown in the following
illustrations.
D-SUB connection
Transmits analog video from your PC to the Monitor set.
Connect the PC and the Monitor set with the supplied
D-sub 15 pin signal cable as shown in the following
illustrations.
NOTE
If you use HDMI PC, it can cause compatibility problem.
yy
Use a certified cable with the HDMI logo attached. If
yy
you do not use a certified HDMI cable, the screen may
not display or a connection error may occur.
Recommended HDMI cable types
yy
- High-Speed HDMI®/TM Cable - High-Speed HDMI®/TM Cable with Ethernet
NOTE
NOTE
y When using a D-Sub signal input cable connector
for Macintosh
y Mac adapter
For Apple Macintosh use, a separate plug adapter
is needed to change the 15 pin high density (3
row) D-SUB VGA connector on the supplied cable
to a 15 pin 2 row connector.
y When you want to use two PC in our Monitor,
please connect the signal cable(D-SUB/DVI-D/
HDMI) respectively in Monitor set.
y If you turn the Monitor set on while it is cold, the
screen may flicker. This is normal.
y Some red, green, or blue spots may appear on the
screen. This is normal.
15
Connecting Peripherals
HDMI connection
Connecting Headphones
Transmits the digital video and audio signals from your
AV devices to the monitor. Connect your AV device to
the monitor with the HDMI cable as illustrated below.
Connect peripherals to the monitor via the headphones
port. Connect as illustrated.
H/P
(sold separately)
NOTE
Peripheral devices are sold separately.
yy
If you use angled headphones, it may cause a
yy
problem with connecting another external device
to the monitor. Therefore, it is recommended to
use straight headphones.
NOTE
If you use HDMI PC, it can cause compatibility
yy
problem.
Use a certified cable with the HDMI logo attached.
yy
If you do not use a certified HDMI cable, the
screen may not display or a connection error may
occur.
Recommended HDMI cable types
yy
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
Angle Type
Straight Type
Depending on the audio settings of the PC and
yy
external device, headphones and speaker functions may be limited.
ENG
ENGLISH
Connecting to AV Devices
16
CUSTOMIZING SETTINGS
ENGLISH
ENG
Activating the Main Menu
1 Press the joystick button on the bottom of the monitor.
2 Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options.
3 Press the joystick button once more to close the main menu.
Joystick Button
Button
Menu Status
Description
Main menu disabled
Enables the main menu.
Main menu enabled
Close the main menu.
(Long press the button to turn off the monitor)
◄
►
▲
▼
Main menu disabled
Adjusts the monitor volume level. (for HDMI only)
Main menu enabled
Enters the input features.
Main menu disabled
Adjusts the monitor volume level. (for HDMI only)
Main menu enabled
Enters the Settings feature.
Main menu disabled
Displays the information on the current input.
Main menu enabled
Turns off the monitor.
Main menu disabled
Displays the information on the current input.
Main menu enabled
Enters the picture mode feature. (for HDMI only)
Main Menu Features
Main Menu
Description
Settings
Configures the screen settings.
Picture Mode
Select picture mode to achieve the best display effect.
Picture Mode
Picture Mode
Picture Mode
Settings
(for HDMI only)
Input
Sets input mode.
Power Off
Turns off the monitor.
Exit
Exits the main menu.
Picture Mode
17
Customizing settings
Brightness
Contrast
Volume
Description
Adjusts the contrast and brightness of the screen.
Adjusts the volume.(for HDMI only)
NOTE
yy You can adjust Mute/ Unmute by moving the joystick button to ▼ in the Volume menu.
Settings > Input
Description
Input List
Selects the input mode.
Aspect Ratio
Adjusts the aspect ratio of the screen.
Full Wide
Displays the video in wide-screen, regardless of the video signal input.
Original
Displays video according to the aspect ratio of the video signal input.
NOTE
yy
22MK4 series 24MK4 series 27MK4 series The options may disabled at the recommended resolution (1920 x 1080).
ENG
ENGLISH
Settings > Quick Settings
18
Customizing settings
ENGLISH
ENG
Settings >
Picture
Description
Picture Mode Custom
Picture Adjust
Allows the user to adjust each element. The color mode of the main menu can be adjusted.
Reader
Optimizes the screen for viewing documents. You can brighten the screen in the OSD menu.
Photo
Optimizes the screen to view photos.
Cinema
Optimizes the screen to improve the visual effects of a video.
Color Weakness
This mode is for users who cannot distinguish between red and green. It enables users with color
weakness to easily distinguish between the two colors.
Game
Optimizes the screen for gameplay.
Brightness
Adjusts the contrast and brightness of the screen.
Contrast
Sharpness
Adjusts the sharpness of the screen.
SUPER
High
RESOLUTION+
Black Level
DFC
Optimized picture quality is displayed when a user wants crystal clear images.
It is effective forhigh quality video or game.
Middle
The optimized picture quality is displayed when a user wants images between
low and high modes for comfortable viewing. It is effective for UCC or SD
video.
Low
The optimized picture quality is displayed when a user wants smooth and
natural images. It is effective for slow -moving pictures or still images.
Off
Select this option for everyday viewing. SUPER RESOLUTION+ is turned off in
this mode.
Sets the offset level (for HDMI only).
yyOffset: as a reference for a video signal, this is the darkest color the monitor can display.
High
Keeps the current contrast ratio of the screen.
Low
Lowers the black levels and raises the white levels from the current contrast ratio of
the screen.
On
Adjusts the brightness automatically according to the screen.
Off
Disables the DFC feature.
NOTE
This is subsidiary for color weakness user. Therefore if you feel uncomfortable with the screen, please turn off
yy
this function.
This function can’t distinguish some colors in some images.
yy
19
Game Adjust
FreeSync
22MK4 series
24MK4 series
27MK4 series
Color Adjust
Faster
Sets the response time to faster.
Fast
Sets the response time to fast.
Normal
Sets the response time to normal.
Off
Does not use the response time improvement feature.
Provides seamless and natural images by synchronizing the vertical frequency of the input signal
with that of the output signal.
CAUTION
yySupported Interface: HDMI.
yySupported Graphic Card : A graphic card that supports AMD’s FreeSync is necessary.
yySupported Version : Make sure to update the graphic card to the latest driver.
yyFor more information and requirement, refer to AMD website at http://www.amd.com/
FreeSync
On
FreeSync function on.
Off
FreeSync function off.
Black
Stabilizer
Black Stabilizer:
You can control the black contrast to have better visibility in dark scenes.
Increasing the Black Stabilizer value brightens the low gray level area on the screen.
(You can easily distinguish objects on dark game screens.)
Reducing the Black Stabilizer value darkens the low gray level area and increases the dynamic
contrast on the screen.
Cross Hair
Cross Hair provides a mark on the center of the screen for First Person Shooter(FPS) games.
Users can select the cross hair that fits their gaming environment among four different cross
hairs.
yyWhen the monitor is off or enters energy saving mode, the Cross Hair feature is
automatically turned off.
Gamma
Mode 1, Mode 2, The higher the gamma value, the darker the image becomes. Likewise, the
Mode 3
lower the gamma value, the lighter the image becomes.
Color Temp
Selects the factory default picture color.
Warm: Sets the screen color to a reddish tone.
Medium: Sets the screen color between a red and blue tone.
Cool: Sets the screen color to a bluish tone.
Custom: The user can adjust it to red, green or blue by customization.
Red/Green/
Blue
You can customize the picture color using Red, Green, and Blue colors.
Mode 4
Configuration Horizontal
Adjust
Vertical
(D-SUB only)
Clock
Phase
Resolution
(D-SUB only)
If you do not need to adjust the gamma settings, select Mode 4.
To move image left and right.
To move image up and down.
To minimize any vertical bars or stripes visible on the screen background.The horizontal screen
size will also change.
To adjust the focus of the display. This item allows you to remove any horizontal noise and clear
or sharpen the image of characters.
User can set the desired resolution.This option is enabled only when the screen resolution on your computer is set
to the following(D-SUB only).
NOTE
The function is enabled only when the screen resolution on your computer is set to the following, except that
the PC output wrong resolution.
1024x768, 1280x768, 1360x768, 1366x768,Off
1280x960, 1600x900,Off
22MK4 series 24MK4 series 27MK4 series
1440x900, 1600x900,Off
22MK4 series 24MK4 series 27MK4 series
Picture Reset Do you want to reset your settings?
No
Cancel the select.
Yes
Returns to the default settings.
ENG
ENGLISH
Response Time Sets a response time for displayed pictures based on the speed of the screen.
For a normal environment, it is recommended that you use Fast.
For a fast-moving picture, it is recommended that you use Faster.
Setting to Faster may cause image sticking.
20
Customizing settings
ENGLISH
ENG
Settings > General
Description
Language
To choose the language in which the control names are displayed.
SMART ENERGY
SAVING
High
Saves energy using the high-efficiency SMART ENERGY SAVING feature.
Low
Saves energy using the low-efficiency SMART ENERGY SAVING feature.
Off
Disables the SMART ENERGY SAVING feature.
Automatic Standby
The monitor will automatically switch to standby mode after a certain period.
OSD Lock
Prevents incorrect key input.
On
Key input is disabled.
NOTE
yy All function except for the OSD Lock mode, brightness, Contrast, Input, Information and Volume are disabled.
Off
Key input is enabled.
Information
The display information will be shown the Model, Serial Number, Total Power On Time, Resolution.
Reset
Do you want to reset your settings?
No
Cancel the select.
Yes
Returns to the default settings.
NOTE
yy Saving Data depends on the Panel. So, those values should be different from each panel and panel vendor. If option of SMART
ENERGY SAVING is High or Low, monitor luminance become higher or lower depend on source.
21
TROUBLESHOOTING
No image appears
Is the power cord of the display
connected?
yy Check and see if the power cord is connected properly to the power outlet.
Do you see an "Out of Range"
message on the screen?
yy This message appears when the signal from the PC (video card) is out of horizontal
or vertical frequency range of the display. See the 'Specifications' section of this
manual and configure your display again.
Do you see a "NO SIGNAL" message
on the screen or black screen?
yy After the monitor is on "NO SIGNAL", the monitor goes to DPM mode.
yy This is displayed when the signal cable between the PC and the monitor is
missing or disconnected. Check the cable and reconnect it.
y
y Check PC status.
Can 't you control some functions in OSD?
Can't you select some menu in
OSD?
yy You can unlock the OSD controls at any time by entering the OSD lock menu and
changing items to off.
CAUTION
Check Control Panel ► Display ► Settings and see if the frequency or the resolution were changed. If yes, readjust the
yy
video card to the recommend resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed,
yy
truncated or biased. Make sure to select the recommend resolution.
The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may
yy
not be supported by the video card performance. In this case, please ask to the computer or the video card
manufacturer.
Keep proper posture when using the monitor, otherwise the screen may not be optimized.
yy
Display image is incorrect
The screen color is mono or abnormal. yy Check if the signal cable is properly connected and use a screwdriver to fasten if
necessary.
yy Make sure the video card is properly inserted in the slot.
yy Set the color setting higher than 24 bits (true color) at Control Panel ► Settings.
The screen blinks.
yy Check if the screen is set to interlace mode and if yes, change it to the recommend
resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display driver?
yy Be sure to install the display driver from the display driver CD (or diskette)
that comes with your display. Or, you can also download the driver from our
website: http://www.lg.com.
yy Make sure to check if the video card supports Plug&Play function.
The screen is flickering.
Did you select the recommended
resolution?
yy
22MK4 series 24MK4 series 27MK4 series If the selected resolution is
HDMI 1080i 60/50 Hz, the screen may be flickering. Change the resolution
to the recommended resolution 1080P.
ENG
ENGLISH
Check the following before calling for service.
22
‌SPECIFICATIONS
ENGLISH
ENG
20MK4 series
LCD Screen
Resolution
Type
TFT (Thin Film Transistor)
LCD(Liquid Crystal Display) Screen
Pixel Pitch
0.3177 mm x 0.307 mm
Maximum Resolution
1366 x 768 @ 60Hz (HDMI)
1366 x 768 @ 60Hz (D-sub)
Video Signal
Input Connector
Recommended Resolution
1366 x 768 @ 60Hz
Horizontal Frequency
30 kHz to 61 kHz
Vertical Frequency
HDMI
-PC: 56 Hz to 75 Hz
-AV: 50 Hz to 61 Hz
D-SUB: 56 Hz to 75 Hz
Synchronization
Separate Sync, Digital.
HDMI IN, D-SUB IN, H/P OUT
0.8 A
Power Input
19 V
Power Consumption
On Mode : 13 W Typ. ( Outgoing condition ) *
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
AC/DC adaptor
Type ADS-18SG-19-3 19016G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPG, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPI, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPCU, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-18FSG-19 19016GPB, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP42, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP36-U, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type DA-16C19, manufactured by Asian Power Devices Inc.
or Type WA-16D19FG, manufactured by Asian Power Devices Inc.
or Type WA-16E19FA, manufactured by Asian Power Devices Inc.
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
Less than 80%
Storage Temperature
Storage Humidity
-20 °C to 60 °C
Less than 85 %
OUTPUT: 19 V
Dimension
Weight (Without
Packaging)
0.84 A
Monitor Size (Width x Height x Depth)
With Stand
463.8 mm x 366.5 mm x 181.9 mm
Without Stand
463.8 mm x 276.4 mm x 38.4 mm
With Stand
2.3 Kg
Without Stand
2.0 Kg
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with LGE test standard(Full White pattern , Maximum resolution).
23
SPECIFICATIONS
‌
LCD Screen
Resolution
Type
TFT (Thin Film Transistor)
LCD(Liquid Crystal Display) Screen
Pixel Pitch
0.24795 mm x 0.24795 mm
Maximum Resolution
1920 x 1080 @ 75 Hz (HDMI)
1920 x 1080 @ 60 Hz (D-sub)
Video Signal
Input Connector
Recommended Resolution
1920 × 1080 @ 60 Hz
Horizontal Frequency
HDMI : 30 kHz to 85 kHz
D-SUB: 30 kHz to 83 kHz
Vertical Frequency
HDMI
-PC: 56 Hz to 75 Hz
-AV: 50 Hz to 61 Hz
D-SUB: 56 Hz to 75 Hz
Synchronization
Separate Sync, Digital.
HDMI IN, D-SUB IN, H/P OUT
1.3 A
Power Input
19 V
Power Consumption
On Mode : 25 W Typ. ( Outgoing condition ) *
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
AC/DC adaptor
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSG-19 19025EPCU-1L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP51, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type WA-24C19FS, manufactured by Asian Power Devices Inc.
or Type WA-24C19FU, manufactured by Asian Power Devices Inc.
or Type WA-24C19FK, manufactured by Asian Power Devices Inc.
or Type WA-24C19FB, manufactured by Asian Power Devices Inc.
or Type WA-24C19FN, manufactured by Asian Power Devices Inc.
or Type DA-24B19, manufactured by Asian Power Devices Inc.
OUTPUT: 19 V
Environmental
conditions
Dimension
Weight (Without
Packaging)
1.3 A
Operating Temperature
Operating Humidity
0 °C to 40 °C
Less than 80%
Storage Temperature
Storage Humidity
-20 °C to 60 °C
Less than 85 %
Monitor Size (Width x Height x Depth)
With Stand
509.6 mm x 395.8 mm x 181.9 mm
Without Stand
509.6 mm x 305.7 mm x 38.5 mm
With Stand
2.8 Kg
Without Stand
2.5 Kg
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with LGE test standard(Full White pattern , Maximum resolution).
ENG
ENGLISH
22MK4 series
24
‌SPECIFICATIONS
ENGLISH
ENG
24MK4 series
LCD Screen
Resolution
Type
TFT (Thin Film Transistor)
LCD(Liquid Crystal Display) Screen
Pixel Pitch
0.2745 mm x 0.2745 mm
Maximum Resolution
1920 x 1080 @ 75 Hz (HDMI)
1920 x 1080 @ 60 Hz (D-sub)
Video Signal
Input Connector
Recommended Resolution
1920 × 1080 @ 60 Hz
Horizontal Frequency
HDMI : 30 kHz to 85 kHz
D-SUB: 30 kHz to 83 kHz
Vertical Frequency
HDMI
-PC: 56 Hz to 75 Hz
-AV: 50 Hz to 61 Hz
D-SUB: 56 Hz to 75 Hz
Synchronization
Separate Sync, Digital.
HDMI IN, D-SUB IN, H/P OUT
1.3 A
Power Input
19 V
Power Consumption
On Mode : 26 W Typ. ( Outgoing condition ) *
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
AC/DC adaptor
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSG-19 19025EPCU-1L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP51, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type WA-24C19FS, manufactured by Asian Power Devices Inc.
or Type WA-24C19FU, manufactured by Asian Power Devices Inc.
or Type WA-24C19FK, manufactured by Asian Power Devices Inc.
or Type WA-24C19FB, manufactured by Asian Power Devices Inc.
or Type WA-24C19FN, manufactured by Asian Power Devices Inc.
or Type DA-24B19, manufactured by Asian Power Devices Inc.
OUTPUT: 19 V
Environmental
conditions
Dimension
Weight (Without
Packaging)
1.3 A
Operating Temperature
Operating Humidity
0 °C to 40 °C
Less than 80%
Storage Temperature
Storage Humidity
-20 °C to 60 °C
Less than 85 %
Monitor Size (Width x Height x Depth)
With Stand
555 mm x 421 mm x 181.9 mm
Without Stand
555 mm x 330.9 mm x 38.4 mm
With Stand
3.1 kg
Without Stand
2.8 kg
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with LGE test standard(Full White pattern , Maximum resolution).
25
‌SPECIFICATIONS
LCD Screen
Resolution
Type
TFT (Thin Film Transistor)
LCD(Liquid Crystal Display) Screen
Pixel Pitch
0.31125 mm x 0.31125 mm
Maximum Resolution
1920 x 1080 @ 75 Hz (HDMI)
1920 x 1080 @ 60 Hz (D-sub)
Video Signal
Recommended Resolution
1920 × 1080 @ 60 Hz
Horizontal Frequency
HDMI : 30 kHz to 85 kHz
D-SUB: 30 kHz to 83 kHz
Vertical Frequency
HDMI
-PC: 56 Hz to 75 Hz
-AV: 50 Hz to 61 Hz
D-SUB: 56 Hz to 75 Hz
Synchronization
Separate Sync, Digital.
Input Connector
HDMI IN, D-SUB IN, H/P OUT
Power Input
19 V
Power Consumption
On Mode : 16.8 W Typ. (ENERGY STAR® standard)*
23 W Typ. (Outgoing condition)**
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
AC/DC adaptor
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSG-19 19025EPCU-1L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP51, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type WA-24C19FS, manufactured by Asian Power Devices Inc.
or Type WA-24C19FU, manufactured by Asian Power Devices Inc.
or Type WA-24C19FK, manufactured by Asian Power Devices Inc.
or Type WA-24C19FB, manufactured by Asian Power Devices Inc.
or Type WA-24C19FN, manufactured by Asian Power Devices Inc.
or Type DA-24B19, manufactured by Asian Power Devices Inc.
1.3 A
OUTPUT: 19 V
Environmental
conditions
Dimension
Weight (Without
Packaging)
1.3 A
Operating Temperature
Operating Humidity
0 °C to 40 °C
Less than 80%
Storage Temperature
Storage Humidity
-20 °C to 60 °C
Less than 85 %
Monitor Size (Width x Height x Depth)
With Stand
625.6 mm x 468.7 mm x 204.1 mm
Without Stand
625.6 mm x 375.2 mm x 44 mm
With Stand
4.6 kg
Without Stand
4.2 kg
The specifications are subject to change without notice.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The On mode power consumption is measured with LGE test standard (Full White pattern , Maximum resolution).
ENG
ENGLISH
27MK4 series
26
Preset Modes (Resolution)
ENGLISH
ENG
D-SUB / HDMI PC Timing
20MK4 series
Display Modes (Resolution)
Horizontal
Frequency(kHz)
Vertical Frequency(Hz)
Polarity(H/V)
720 x 400
31.468
70.08
-/+
640 x 480
31.469
59.94
-/-
640 x 480
37.5
75
-/-
800 x 600
37.879
60.317
+/+
800 x 600
46.875
75
+/+
1024 x 768
48.363
60
-/-
1366 x 768
47.712
59.79
+/+
Recommend Mode
D-SUB PC Timing
22MK4 series 24MK4 series 27MK4 series
Display Modes (Resolution)
Horizontal
Frequency(kHz)
Vertical Frequency(Hz)
Polarity(H/V)
720 x 400
31.468
70.08
-/+
640 x 480
31.469
59.94
-/-
640 x 480
37.5
75
-/-
800 x 600
37.879
60.317
+/+
800 x 600
46.875
75
+/+
1024 x 768
48.363
60
-/-
1024 x 768
60.023
75.029
+/+
1152 x 864
67.500
75
+/+
1280 x 1024
63.981
60.023
+/+
1280 x 1024
79.976
75.035
+/+
1680 x 1050
65.290
59.954
-/+
1920 x 1080
67.500
60
+/+
HDMI PC Timing
22MK4 series 24MK4 series 27MK4 series
Display Modes (Resolution)
Horizontal
Frequency(kHz)
Vertical Frequency(Hz)
Polarity(H/V)
720 x 400
31.468
70.08
-/+
640 x 480
31.469
59.94
-/-
640 x 480
37.5
75
-/-
800 x 600
37.879
60.317
+/+
800 x 600
46.875
75
+/+
1024 x 768
48.363
60
-/-
1024 x 768
60.023
75.029
+/+
1152 x 864
67.500
75
+/+
Recommend Mode
27
ENGLISH
28
63.981
60.023
+/+
1280 x 1024
79.976
75.035
+/+
1680 x 1050
65.290
59.954
-/+
1920 x 1080
67.500
60
+/+
1920 x 1080
83.89
74.97
+/+
Recommend Mode
HDMI AV Timing
20MK4 series
Factory support mode
(Preset Mode)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
480P
31.50
60
O
576P
31.25
50
O
720P
37.50
50
O
720P
45.00
60
O
HDMI
22MK4 series 24MK4 series 27MK4 series
Factory support mode
(Preset Mode)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
480P
31.50
60
O
576P
31.25
50
O
720P
37.50
50
O
720P
45.00
60
O
1080P
56.25
50
O
1080P
67.50
60
O
Recommend Mode
HDMI
ENG
ENGLISH
1280 x 1024
LED LCD Monitor (LED Monitor)
MK4 series
a
+
or
20MK4 series
22MK4 series
27MK4 series
b
24MK4 series
English Depending on country
www.lg.com
English Read Owner's Manual.
English
It is recommend that use the supplied components.
Image may very depending on model.
Unpacking
MBM66205788
Check your product box for the following items. If there
are any missing accessories, contact the local dealer
where you purchased your product. The illustrations in
this manual may differ from the actual product and item.
P/No: MBM66205787 (1802-REV00)
1
2
20MK4 series
22MK4 series
24MK4 series
2
27MK4 series
3
20MK4 series
22MK4 series
24MK4 series
3
27MK4 series
4
20MK4 series
22MK4 series
24MK4 series
4
27MK4 series
or
Image may very depending on models.
SOFTWARE GUIDE
(Windows, Mac)
Please read this manual carefully before operating your set and retain it for future reference.
www.lg.com
2
GUIDES ON USING PRODUCT FUNCTIONS (WINDOWS)
ENGLISH
•• For information on the drivers and software supported by the model, see the owner’s manual.
•• Image shown may differ from the product that you are using.
Windows Software
Monitor Driver
•• Installation priority : Recommended
•• Usage : The resolution and frequency are adjusted for the monitor.
ASM Driver
(Applies only to models supporting Thunderbolt ( ))
•• Installation priority : Required
•• Usage : Driver file used when transferring data via Thunderbolt ( ) port in Windows OS.
How to Install
•• Installing with the CD provided.
: Insert the user manual CD provided in the product box into the PC’s CD drive and install the driver program.
•• Downloading from the LG Electronics website.
: www.lg.com
OnScreen Control
•• Installation priority : Recommended
•• Usage : S
oftware provided so that the key features of your monitor can be operated in the PC environment, including spilt
screen and the setting of picture modes for each software program.
How to Install
•• Installing with the CD provided.
: Insert the manual CD provided in the product box into the PC’s CD drive and install the OnScreen Control.
•• Downloading from the LG Electronics website.
: www.lg.com
3
How to Run
1 Double-click the shortcut icon on the desktop.
2 Click the tray icon in the bottom right corner of your PC screen. Click Start Program.
1
2
How to Use
ScreenSplit
- You can easily arrange multiple windows by using the split screen layout provided.
Monitor Settings
- You can control the basic features on the settings menu, such as Brightness, Contrast, orientation and Picture Mode for
maximum convenience.
NOTE
Firmware updates are available in the Monitor Settings Menu when connecting the monitor firmware update feature supported
model. For firmware update, the USB cable ( USB type C to A ) must be connected to the PC.
ENGLISH
1 Connect an LG monitor that supports OnScreen Control to the PC.
2 Run OnScreen Control.
4
•• My Application Preset
ENGLISH
-- My Application Preset allows you to preset the appropriate picture mode for each individual software program installed
on your PC. When you run an application for which you have already chosen a picture mode in My Application Preset, your
monitor changes to the preset picture mode.
•• Game Mode Settings
-- This mode will be only shown with the monitor which supports Gaming features. It shows the mode optimized for games
from the modes available on the display hardware so that you can select the one that suits you best.
•• Settings
-- You can configure the settings for OnScreen Control.
NOTE
Supported features can be different by model.
5
Dual Controller (Keyboard/Mouse Sharing Software)
Windows/Mac
Windows/Mac
Screen
Screen
PC 1
PC 2
Router
(Wired/Wireless)
How to Install
Downloading from the LG Electronics website.
: www.lg.com
How to Run
1 Connect your PC to a network.
2 Connect an LG monitor that supports Dual Controller to the PC.
3 Run Dual Controller.
1 Double-click the shortcut icon on the desktop.
2 Click the tray icon on the bottom right of the PC screen and then click Open Dual Controller.
1
2
ENGLISH
(Applies only to models supporting Dual Controller)
•• Installation priority : Optional
•• Usage : Sharing a mouse and a keyboard between PCs connected to the same network; transferring files (providing
compatibility between Windows and Mac OS)
6
How to Use
ENGLISH
1 Check your network connection.
Make sure that the PCs you want to control through keyboard/mouse sharing are connected to the same LAN via a router.
-- An LG monitor that supports Dual Controller must be connected to the PC that will be run in Main PC mode.
-- Only one user on a network can use Dual Controller. Dual Controller can also be used in office environments. However, it is
recommended to have only one user.
-- Dual Controller may not work properly when playing games.
2 Run Dual Controller on the PC running in Main PC mode.
: Click the Main PC button on the PC whose keyboard and mouse will be shared.
3 Run Dual Controller on a Sub PC in Sub PC mode.
: Click the Sub PC button on the PC you want to control.
4 Click the Apply Dual Controller button on the Main PC.
: The Sub PC is automatically searched for on the Main PC mode screen. Click the Apply Dual Controller button on the Main
PC mode screen.
7
•• When you move the mouse cursor from the screen of the Main PC to the screen of the Sub PC, you can use the Main PC’s
ENGLISH
keyboard and mouse on the Sub PC.
-- You can set the positions of the Main PC and the Sub PC, to Left/Right or Right/Left, in PC Position Control in Dual
Controller’s Option tab.
-- We recommend that you set the Sub PC so that its screen is only displayed on a monitor.
-- If there is an active Internet connection, Dual Controller automatically updates to the latest version when started.
-- Dual Controller may not be available on certain websites and networks depending on the security policy.
8
True Color Pro (Monitor Color Calibration Software)
ENGLISH
(Applies only to models supporting True Color Pro)
•• Installation priority : Optional
•• Usage : Calibrates the monitor’s color output using the hardware calibration function.
•• A separate calibrator is required.
-- Applicable calibrators : LG Calibrator, Spyder3, Spyder4, Spyder5, i1Display Pro, ColorMunki Photo/Design, and i1Pro2
•• True Color Pro may not support PBP mode.
•• Daisy-chain is not supported.
•• It is recommended to perform calibration after disabling the dual monitor function.
How to Install
Downloading from the LG Electronics website.
: www.lg.com
How to Run
1 Connect the monitor to the PC using the USB cable.
2 Connect the calibrator to the USB IN port of the PC or the monitor.
3 Start the True Color Pro program.
1 Double-click on the icon on the desktop.
2 Click the tray icon in the bottom right corner of your PC screen. Click Start Program.
1
2
9
How to Use
•• For details on using the software, refer to the program’s Help.
ENGLISH
True Color Pro launch screen.
Calibration start screen.
10
GUIDES ON USING PRODUCT FUNCTIONS (MAC)
ENGLISH
For information on the drivers and software supported by the model, see the owner’s manual.
Image shown may differ from the product that you are using.
Mac Software
OnScreen Control
Installation priority : Recommended
Usage : Software provided so that the key features of your monitor can be operated in the PC environment, including spilt
screen and the setting of picture modes for each software program.
How to Install
Installing with the CD provided.
: Insert the manual CD provided in the product box into the PC’s CD drive and install the OnScreen Control.
Downloading from the LG Electronics website.
: www.lg.com
How to Run
1 Connect an LG monitor that supports OnScreen Control to the PC.
2 Run OnScreen Control.
1 Finder
Applications
Run OnScreen Control
2 Click the OnScreen Control icon on the menu bar and then click Start Program.
3 Search for OnScreen Control in Spotlight search.
11
How to Use
Monitor Settings
- You can control the basic features on the settings menu, such as Brightness, Contrast and Picture Mode for maximum
convenience.
NOTE
Firmware updates are available in the Monitor Settings Menu when connecting the monitor firmware update feature supported
model. For firmware update, the USB cable ( USB type C to A ) must be connected to the PC.
ENGLISH
ScreenSplit
- You can easily arrange multiple windows by using the split screen layout provided.
12
ENGLISH
My Application Preset
- My Application Preset allows you to preset the appropriate picture mode for each individual software program installed
on your PC. When you run an application for which you have already chosen a picture mode in My Application Preset, your
monitor changes to the preset picture mode.
Game Mode Settings
- This mode will be only shown with the monitor which supports Gaming features. It shows the mode optimized for games
from the modes available on the display hardware so that you can select the one that suits you best.
Settings
- You can configure the settings for OnScreen Control.
NOTE
Supported features can be different by model.
13
Dual Controller (Keyboard/Mouse Sharing Software)
Windows/Mac
Windows/Mac
Screen
Screen
PC 1
PC 2
Router
(Wired/Wireless)
How to Install
Downloading from the LG Electronics website.
: www.lg.com
1 When the installation program starts, click on Continue. During the installation, you have to accept the license agreement.
2 Enter the Admin User password and click on Install Software.
3 Click on Restart to finish the installation.
ENGLISH
(Applies only to models supporting Dual Controller)
Installation priority : Optional
Usage : Sharing a mouse and a keyboard between PCs connected to the same network; transferring files (providing
compatibility between Windows and Mac OS)
14
How to Run
ENGLISH
1
2
3
1
Connect your PC to a network.
Connect an LG monitor that supports Dual Controller to the PC.
Run Dual Controller.
Finder Applications Run Dual Controller
2 Click the Dual Controller icon on the menu bar and then click Open Dual Controller.
3 Search for Dual Controller in Spotlight.
How to Use
Instructions for running Dual Controller for Mac are the same as Dual Controller for Windows. See the instructions for Dual
Controller for Windows.
- The PC whose keyboard and mouse will be shared must be run in Main PC mode.
- An LG monitor that supports Dual Controller must be connected to the PC that will be run in Main PC mode.
- The PC that you want to control with Dual Controller must be run in Sub PC mode.
- Only one user on a network can use Dual Controller.
- Dual Controller may not work properly when playing games.
- We recommend that you set the Sub PC so that its screen is only displayed on a monitor.
- If there is an active Internet connection, Dual Controller automatically updates to the latest version when started.
- Dual Controller may not be available on certain websites and networks depending on the security policy.
15
True Color Pro (Monitor Color Calibration Software)
How to Install
Downloading from the LG Electronics website.
: www.lg.com
1 When the installation program starts, click on Continue. During the installation, you have to accept the license agreement.
2 Enter the Super User password and click on Install Software.
3 Click on Restart to finish the installation.
ENGLISH
(Applies only to models supporting True Color Pro)
•• Installation priority : Optional
•• Usage: Calibrates the monitor’s color output using the hardware calibration function.
•• A separate calibrator is required.
-- Applicable calibrators : LG Calibrator, Spyder3, Spyder4, Spyder5, i1Display Pro, and ColorMunki Photo/Design, and i1Pro2
•• True Color Pro may not support PBP mode.
•• Daisy-chain is not supported.
•• It is recommended to perform calibration after disabling the dual monitor function.
16
How to Run
ENGLISH
1
2
3
1
Connect the monitor to the PC using the USB cable.
Connect the calibrator to the USB IN port of the PC or the monitor.
Start the True Color Pro program.
Finder Applications Run True Color Pro
True Color Pro
2 Click on the True Color Pro icon on the menu bar and click on Start Program.
3 Search for True Color Pro in Spotlight search.
True Color Pro
How to Use
For details on using the software, refer to the program’s Help.
True Color Pro launch screen.
Calibration start screen.
IMPORTANT PRECAUTIONS
1
This unit has been engineered and manufactured to ensure your personal safety, however improper
use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all
safeguards incorporated in this display, observe the following basic rules for its installation, use, and
servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is
certified by the applicable national standards if not being provided by the supplier. If the power cable is
faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a
replacement.
The appliance coupler is used as the disconnect device.
Please make sure the device is installed near the wall outlet to which it is connected and that the outlet is
easily accessible.
Operate the display only from a power source indicated in the specifications of this manual or listed on the
display. If you are not sure what type of power supply you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs.
They may result in a shock or fire hazard. Call your service technician for replacement.
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even
if the unit is turned off.
Do not Open the Display:
There are no user serviceable components inside.
yy
There are Dangerous High Voltages inside, even when the power is OFF.
yy
Contact your dealer if the display is not operating properly.
yy
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
yy
Use only a stand recommended by the manufacturer.
yy
Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the
yy
product screen.
It can cause injury to human, problem to product and damage the display.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period of time. Never leave
yy
the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet openings. Some internal
yy
parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
yy
When the display is to be left unattended for an extended period of time, unplug it from the wall outlet.
yy
In the presence of thunder and lightning, never touch the power cord and signal cable because it can
yy
be very dangerous. It can cause electric shock.
ENG
ENGLISH
IMPORTANT PRECAUTIONS
IMPORTANT PRECAUTIONS
2
On Installation
Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
yy
Place the display in a built-in enclosure unless proper ventilation is provided.
yy
Cover the openings with cloth or other material.
yy
Place the display near or over a radiator or heat source.
yy
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the
Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used
under any mode except the recommended resolution, some scaled or processed images may appear on
the screen. However, this is characteristic of the fixed-resolution LCD panel.
Displaying a still image for long time on the monitor may leave persistent image or stain on the monitor
screen. To avoid this problem, use a screen saver and power off when this product is not used. Persistent
image or stain caused by long time usage are not covered by the warranty on this product.
Do not shock or scratch the front and sides of the screen with metallic objects.
Otherwise, it may cause damage to the screen.
Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the
damaged product can cause electric shock or fire. Contact an authorized the service center for repair.
Avoid high temperatures and humidity.
Do not install this product on a wall if it could be exposed to oil or oil mist.
This may damage the product and cause it to fall.
yy
For displays with glossy bezels the user should consider the placement of the display as the bezel may
cause disturbing reflections from surrounding light and bright surfaces.
Do not use products using high voltage around the Monitor. (ex. Electrical Swatter)
Monitor may have malfunction as its electrical shock.
yy
Precautions to the AC Adapter and Power
If water or any foreign substance goes inside the product (TV, monitor, power cord, or AC adapter),
disconnect the power cord immediately and contact the service center.
Otherwise, this may cause a fire or electric shock due to damage to the product.
yy
Do not touch the power plug or AC adapter with wet hands. If the pins of the plug are wet or dusty, wipe and
dry them before use.
Otherwise, this may cause a fire or electric shock.
yy
ENG
ENGLISH
Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power
cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during
operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard.
IMPORTANT PRECAUTIONS
3
ÁGUA
On Cleaning
Unplug the display before cleaning the face of the display screen.
yy
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because
yy
over-spraying may cause electrical shock.
When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent
yy
scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An
‫םימ‬
electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol)
Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction
yy
only. Too much moisture may cause staining.
On Repacking
Do not throw away the carton and packing materials. They make an ideal container in which to
yy
transport the unit. When shipping the unit to another location, repack it in its original material.
On Disposal(Only, LCD Monitor with Hg lamp)
The fluorescent lamp used in this product contains a small amount of mercury.
yy
Do not dispose of this product with general household waste.
yy
Disposal of this product must be carried out in accordance to the regulations of your local authority.
yy
ENG
ENGLISH
Make sure to completely insert the power cord into the AC adapter.
If loosely connected, the poor connection may cause a fire or electric shock.
yy
Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc.
The use of non-approved products may cause a fire or electric shock.
yy
When unplugging the power cord, always pull it by the plug. Do not bend the power cord with excessive
force.
The power line can be damaged, which may cause electric shock or fire.
yy
Be careful not to step or place heavy objects (electronic appliances, clothing, etc.) on the power cord or AC
adapter. Be careful not to damage the power cord or AC adapter with sharp objects.
Damaged power cords may cause a fire or electric shock.
yy
Never disassemble, repair or modify the power cord or AC adapter.
This may cause a fire or electric shock.
yy
Be sure to keep the outlet, AC adapter, and pins of the power plug clean from dust and etc.
This may cause a fire.
yy
DDC(Display Data Channel)
ENGLISH
DDC (Display Data Channel)
DDC is a communication channel over which
the monitor automatically informs the host
system (PC) about its capabilities.
DDC protocol
① DDC1/DDC2B
An uni-directional communication channel.
② DDC 2AB/DDC2B+/DDC2Bi
A bi-directional communication channel.
Note
• PC must support DDC functions to do this.
E-DDC (Enhanced DDC)
A protocol based on I²C and used on a bidirectional data channel between the display
and host. This protocol accesses devices at I²C
address of A0/A1 as well as the address 60.
The 60 address is used as a segment register
to allow larger amounts of data to be retrieved
than is possible using DDC2B protocols. The
protocol is compatible with DDC2B protocols.
1
Energy saving Design
ENGLISH
Energy Saving Design
This program is designed to have computer
equipment manufacturers build circuitry into
their products to reduce power consumption
when it is not in operation.
When this monitor is used with a PC on
which a screen blanking software complying
with the VESA Display Power Management
Signalling (DPMS) Protocol is installed, it can
conserve significant energy by reducing power
consumption when it is not in operation.
There are 2 signal lines, 3 modes of operation.
: On Mode, Sleep Mode, Off Mode.
Mode
Definition
On
mode
The normal operation.
When the monitor is on mode,
being connected to a power
source, it displays an image.
Sleep
Mode
The reduced power state.
returns to on mode when the
user moves the mouse or
presses a key on the keyboard.
Off
Mode
The lowest power consumption
state.
returns to on mode when the
user pushes a power switch.
Note
• The energy saving Design monitors only work
while connected to the computers that have
energy saving features.
1
Service
ENGLISH
Service
Unplug the monitor from the wall outlet and
refer servicing to qualified service personnel
when :
The power cord or plug is damaged or
yy
frayed.
Liquid has been spilled into the monitor.
yy
The monitor has been exposed to rain or
yy
water.
The monitor does not operate normally
yy
following the operating instructions. Adjust
only those controls that are covered in
the operating instructions. An improper
adjustment of other controls may result in
damage and often requires extensive work
by a qualified technician to restore the
monitor to normal operation.
The monitor has been dropped or the cabinet
yy
has been damaged.
The monitor exhibits a distinct change in
yy
performance.
Snapping or popping from the monitor is
yy
continuous or frequent while the monitor is
operating. It is normal for some monitors to
make occasional sounds when being turned
on or off, or when changing video modes.
Do not attempt to service the monitor yourself,
as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
1
REGULATORY
INFORMATION
Please read this manual carefully before operating
your set and retain it for future reference.
www.lg.com
2
FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception (which can be determined by turning
the equipment on and off), the user is encouraged to try to correct the interference by using one or more of the
following measures:
•• Reorient or relocate the receiving antenna.
•• Increase the separation between the equipment and the receiver.
•• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications in construction of this device are not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
3
INFORMATION FOR ENVIRONMENTAL
PRESERVATION
English
Information for Environmental
Preservation
LGE. announced the ‘LG Declaration for a Cleaner
Environment’ in 1994, and this ideal has served
as a guiding managerial principle ever since. The
Declaration is a foundation that has allowed us to
undertake environmentally friendly activities in careful
consideration of economic, environmental, and social
aspects.
We promote activities for environmental preservation,
and we specifically develop our products to embrace the
concept of environment-friendly.
We minimize the hazardous materials contained in our
products. For example, there is no cadmium to be found
in our product.
Information for recycling
This product may contain parts which could be
hazardous to the environment. It is important that this
product be recycled after use.
LGE. handles all waste product through an
environmentally acceptable recycling method. There
are several take-back and recycling systems currently
in operation worldwide. Many parts will be reused and
recycled, while harmful substances and heavy metals are
treated by an environmentally friendly method.
If you want to find out more information about our
recycling program, please contact your local LG vendor
or a corporate representative of LG.
We set our vision and policies on a cleaner world by
selecting the issue of the global environment as a task
for corporate improvement. Please visit our website for
more
information about our ‘green’ policies.
http://www.lg.com/global/sustainability/environment/
take-back-recycling.jsp
8
EPEAT
“EPEAT registered where applicable/supported. EPEAT
registration varies by country - see
www.epeat.net for registration status by country.”
001
10
WEEE
ENGLISH
Disposal of your old appliance
1 This crossed-out wheeled bin symbol indicates that
waste electrical and electronic products (WEEE)
should be disposed of separately from the municipal
waste stream.
2 Old electrical products can contain hazardous
substances so correct disposal of your old appliance
will help prevent potential negative consequences
for the environment and human health. Your old
appliance may contain reusable parts that could be
used to repair other products, and other valuable
materials that can be recycled to conserve limited
resources.
3 You can take your appliance either to the shop where
you purchased the product, or contact your local
government waste office for details of your nearest
authorised WEEE collection point. For the most
up to date information for your country please see
www.lg.com/global/recycling
18
INDIA ONLY
Disposal of your old appliance (as per e-waste Rules)
1. W
hen this crossed out wheeled bin symbol is depicted on the product and its operator’s manual, it means
the product is covered by the e-waste Management and Handling Rules , 2011 and are meant to be recycled,
dismantled, refurbished or disposed off.
2. Do’s :
a. The product is required to be handed over only to the authorized recycler for disposal.
b. Keep the product in isolated area, after it becomes non-functional/unrepairable so as to prevent its accidental
ROMÂNĂ
breakage.
Don’t :
a. The product should not be opened by the user himself/herself, but only by authorized service personnel.
b. The product is not meant for re-sale to any unauthorized agencies/scrap dealer/kabariwalah.
c. The product is not meant for mixing into household waste stream.
d. Do not keep any replaced spare part(s) from the product in exposed area.
3. A
ny disposal through unauthorized agencies/person will attract action under Environment (Protection) Act 1986.
4. “ This product is complied with the requirement of Hazardous Substances as specified under Rule 13 (1) & (2) of the
E-Waste(Management & Handling) Rules, 2011”.
5. To locate a nearest collection centre or call for pick-up (limited area only) for disposal of this appliance, please
contact Toll Free No. 1800-315-9999 / 1800-180-9999 for details. All collection centre and pick up facilities are
done by third parties with LG Electronics India Pvt. Ltd. Merely as a facilitator.
For more detailed information, please visit : http://www.lge.com/in.
19
i;kZoj.kh; tkudkjh
अपने परु ाने निपटान के उपकरण ( ई-अपशिष्ट नियम के अनस
ु ार )
1. ज
ब इस काटे गए पहिये वाले बिन का चिन्ह किसी उपकरण और इसके ओपेरटर की पुस्तिका के साथ संलग्न होता है तो
इसका मतलब है कि इसे “ई- अपशिष्ट “(प्रबंधन और हथालन ) नियम २०११ के अंतरत
्ग सम्मिलित किया गया है ,
और इसे नवीनीकरणकरन ,विघटन और निपटान के लिए बनाया गया है ।
2. क
रें :
क. उपकरण को सिर्फ अधिकृत पुनः नवीनीकरणकर्ता को ही निपतारण करने हे तु हस्तांतरित करें ।
ख. जब उपकरण कार्यरत न हो इसे अलग क्षेत्र में रखें ताकि उपकरण से होने वाली दर्घ
ु टनाओ से बचा जा सके ।
ROMÂNĂ
न करें :
क. इस उपकरण को स्वयं/खद
ु नहीं खोलना चाहिए ! उपकरण को केवल अधिकृत अधिकारी के द्वारा ही खोला जाना
चाहिए ।
ख. इस उपकरण को पन
ु ः बिक्री के लिए किसी भी कबाड़ीवाला / भंगार-वाला / अनाधिकृत संस्था को न दें ।
ग. इस उपकरण को किसी घरे लू अपशिष्ट सामान के साथ मिलाकर न रखें ।
घ. उपकरण के बदले हुए या आतंरिक परु जो को खल
ु े क्षेत्र में न रखें ।
3. य
दि किसी अनाधिकृत विभाग या व्यक्ति के द्वारा निपटारन किया जाता है तो यह पर्यावरण (सुरक्षा) धारा १९८६ के
अंतरत
्ग आता है ।
4. य
ह उत्पाद ई-अपशिष्ट (प्रबंधन और हथालन) नियम 2011 के अन्तर्गत 13(1) एवं (2) के तहत निर्दिष्ट खतरनाक
पदार्थो की आवश्‍यकता का पालन करता है
5. उ
परोक्त पदार्थो के निपटारन के लिए नजदीकी निपटारन संसथान (संकीर्ण क्षेत्र )में कॉल करें । अधिक जानकारी के लिए
हमारे टोल फ्री नंबर 1800-315-9999 / 1800-180-9999 पर कॉल करें . सभी संग्रहण केंद्र व पिक-अप की सवु िधाएं
किसी थर्ड- पार्टी जो LG Electronics India Pvt. Ltd. को अपनी सेवाएं प्रदान कर रही हों, से करवाएं ।
ज्यादा जानकारी के लिए दे खें वेब:साईट : http://www.lge.com/in
20
CONFORMITY NOTICE
ENGLISH
Hereby, LG Electronics European Shared Service Center
B.V., declares that this product is compliant with the
essential requirements. The complete Declaration of
Conformity may be requested through the following
postal address:
LG Electronics European Shared Service Center B.V.,
Krijgsman 1, 1186 DM Amstelveen, The Netherlands
or can be requested at our dedicated DoC website:
http://www.lg.com/global/support/cedoc/cedoc#
31
DECLARATION OF CONFORMITY
0197
English
[For Equipment Under Radio Equipment Directive]
Hereby, LG Electronics declares that the radio equipment
type Monitor is in compliance with Directive 2014/53/
EU. The full text of the EU declaration of conformity is
available at the following internet address:
0197
http://www.lg.com/global/support/cedoc/cedoc#
LG Electronics European Shared Service Center B.V.
Krijgsman 1
1186 DM Amstelveen
The Netherlands
The use of the 5150 – 5350 MHz band is restricted to
indoor use only. (For Wi-Fi/Bluetooth built-in model or
Wi-Fi built-in model)
Make sure to read the Safety Precautions before using the product.
Keep the Owner’s Manual (CD) in an accessible place for future
reference.
The model and serial number of the SET is located on the back and one
side of the SET. Record it below should you ever need service.
MODEL
SERIAL
(for 27MK4 series)
ENERGY STAR is a set of power-saving
guidelines issued by the U.S.Environmental
Protection Agency(EPA).
As an ENERGY STAR Partner LGE U. S.
A.,Inc. has determined that this product
meets the ENERGY STAR guidelines for
energy efficiency.
Refer to ENERGY STAR.gov for more information
on the ENERGY STAR program.
Download PDF