OWNER’S MANUAL IPS LED MONITOR (LED Monitor*) * LG LED Monitor applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 27HJ712C www.lg.com Copyright ⓒ 2017 LG Electronics Inc. All Rights Reserved. 2 TABLE OF CONTENTS ENGLISH LICENSE-------------------------------- 3 USER SETTINGS---------------------- 23 ASSEMBLY AND PREPARING--------- 4 -- Activating the Main Menu-------------------- 23 -- Product Composition--------------------------- 4 -- Supported Drivers and Software--------------- 5 -- Component and Button Description----------- 6 How to Use the Joystick Button Input Connector Main Menu Features -- User Settings---------------------------------- 24 Menu Settings Quick Settings PBP Picture -- Moving and Lifting the Monitor---------------- 9 General -- Installing the Monitor------------------------- 10 Reset Assembling the Stand base Arranging Cables Installing on a Table Adjusting the Angle Adjusting the Stand Height Pivot Feature Using the Kensington lock Detaching the Stand Body Installing the wall mount plate Installing on the Wall USING THE MONITOR---------------- 19 -- Connecting to a PC---------------------------- 19 HDMI connection DisplayPort Connection -- Connecting AV Devices------------------------ 20 HDMI Connection -- Connecting Peripherals------------------------ 21 USB Cable connection - PC Connecting Headphones -- Service only port------------------------------ 22 TROUBLESHOOTING----------------- 38 PRODUCT SPECIFICATIONS--------- 40 -- Factory Support Mode------------------------ 41 DisplayPort HDMI -- HDMI Timing (Video)-------------------------- 42 -- Power LED------------------------------------- 42 3 LICENSE The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. VESA, VESA logo, DisplayPort compliance logo and DisplayPort compliance logo for dual-mode source devices are all registered trademarks of the Video Electronics Standards Association. The SuperSpeed USB Trident logo is a registered trademark of USB Implementers Forum, Inc. ENGLISH Each model has different licenses. Visit www.lg.com for more information on the license. 4 ASSEMBLY AND PREPARING ENGLISH Product Composition Please check whether all the components are included in the box before using the product. If there are any missing components, contact the retailer where you purchased the product. Note that the product and related components may look different from those shown here. CD (Owner’s Manual/ Software/ Guides)/ Cards Power Cord AC/DC Adaptor or A-B type USB 3.0 Cable HDMI Cable DisplayPort Cable Stand Body Cable Holder Stand Base 5 CAUTION NOTE •• The components may look different from those illustrated here. •• Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product. •• To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer from which you purchased the product. •• The power cord provided may differ depending upon the region. Supported Drivers and Software Check the drivers and software supported by your product and refer to the manuals on the CD enclosed in the product package. Installation Priority 27HJ712C Monitor Driver Drivers and Software Recommended O Dual Controller Optional O True Color Pro Optional O •• Required and Recommended: You can download and install the latest version from the enclosed CD or from the LGE website (www.lg.com). •• Optional: You can download and install the latest version from the LGE website (www.lg.com). ENGLISH •• Always use genuine LG components to ensure safety and product performance. •• The product warranty will not cover damage or injury caused by the use of unauthorized components. •• It is recommend that use the supplied components. •• If you use generic cables not certified by LG, the screen may not display or there may be image noises. 6 Component and Button Description ENGLISH Joystick Button Power LED •• On: Power is on •• Off: Power is off 7 How to Use the Joystick Button Basic Functions / Power on Press the joystick button once with your finger to turn on the monitor. Power off Press and hold the joystick button once with your finger to turn off the monitor. Volume Control You can control the volume by moving the joystick button left/right. NOTE •• The joystick button is located at the bottom of the monitor. ENGLISH You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger. 8 Input Connector ENGLISH DO NOT USE 9 When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation regardless of its shape or size. CAUTION •• As far as possible, avoid touching the monitor screen. -- This may result in damage to the screen or some of the pixels used to create images. •• It is advisable to place the monitor in the original box or packing material before attempting to move it. •• Before moving or lifting the monitor, disconnect the power cord and all cables. •• Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself. •• If you use the monitor panel without the stand base, its joystick button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction. •• When holding the monitor, the screen should face away from you to prevent it being scratched. •• When moving the monitor, avoid any strong shock or vibrations to the product. •• When moving the monitor, keep it upright, never turn the monitor on its side or tilt it sideways. ENGLISH Moving and Lifting the Monitor 10 Installing the Monitor 3 ENGLISH Assembling the Stand base •• Illustrations in this document represent typical procedures, so they may look different from the actual product. 1 4 CAUTION •• To protect the screen from scratches, cover the surface with a soft cloth. 2 Stand Body Stand Base or NOTE •• Press the stand until the button reaches the top. 11 CAUTION procedures, so they may look different from the actual product. •• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.) •• Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty. •• Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand and could result in personal injury. •• When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen may cause damage to it. NOTE •• You can disassemble the stand in the reverse order of the assembly. Arrange the cables using the cable holder as shown in the illustration. Cable Holder ENGLISH •• Illustrations in this document represent typical Arranging Cables 12 Installing on a Table Cautions When Connecting Power Cord ENGLISH 1 Lift the monitor and place it on the table in an upright position. Place at least 100 mm away from the wall to ensure sufficient ventilation. 100 mm 100 mm 100-240 V ~ 100 mm 100 mm •• Make sure to use the power cord that is provided in the product package and connect it to a grounded power outlet. •• If you need another power cord, please contact your local dealer or the nearest retail store. 2 Connect the power adapter to the monitor and then plug the power cord into the wall outlet. 3 2 1 3 Press the joystick button on the bottom of the monitor to turn on the monitor. CAUTION •• Unplug the power cord prior to moving or installing the monitor. There is risk of electric shock. 13 Adjusting the Stand Height 1 Place the monitor in an upright position, mounted 1 Place the monitor mounted on the stand base in an on the stand base. 2 Adjust the angle of the screen. The angle of the screen can be adjusted forwards or backwards for a comfortable viewing experience. Rear Front upright position. 2 Handle the monitor with both hands for safety. 3 The height can be adjusted up to 110.0 mm. 110.0 mm WARNING •• To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as illustrated below. WARNING •• Do not put your fingers or hand between the screen and the base (chassis) when adjusting the screen’s height. ENGLISH Adjusting the Angle 14 2 Adjust the angle of the monitor in the direction of Pivot Feature ENGLISH The pivot feature allows the monitor to rotate 90° clockwise. the arrow as shown in the figure. Head 3 Rotate the monitor clockwise as shown in the Stand figure. WARNING •• To avoid scratching the stand base, make sure that when rotating the monitor using the pivot feature, the stand does not make contact with the monitor. 1 Raise the monitor to the maximum height. 4 Complete the installation by rotating the monitor 90° as shown below. 15 NOTE pivot shortcut key provided with your Windows operating system. Note that some Windows versions and some graphics card drivers may use different settings for the screen pivot key or may not support the pivot key at all. •• Windows screen pivot shortcut keys -- 0°: Ctrl + Alt + Up arrow key (•) -- 90°: Ctrl + Alt + Left arrow key (•) -- 180°: Ctrl + Alt + Down arrow key (•) -- 270°: Ctrl + Alt + Right arrow key (•) The Kensington security system connector is located at the back of the Monitor set. For more information on installation and usage, refer to the Kensington lock owner's manual or visit the website at http://www.kensington.com. Connect the Kensington security system cable between the Monitor set and a table. WARNING •• Take care when rotating the monitor if the cable is connected. •• To avoid injury when rotating the display, do not place your fingers between the display and the stand base. NOTE •• The Kensington security system is optional. You can obtain optional accessories from most electronics stores. ENGLISH •• Auto Pivot feature of the display is not supported. •• The screen can be rotated easily using the screen Using the Kensington lock 16 ENGLISH Detaching the Stand Body Installing the wall mount plate 1 Place the monitor’s screen face down. To protect This monitor supports the specification of the standard wall mount plate or compatible device. the screen from scratches, cover the surface with a soft cloth. 2 Remove the stand from the monitor by pressing the button on the bottom center of the back of the monitor. 1 Place the screen face down. To protect the screen from scratches, cover the surface with a soft cloth. 2 Using a screwdriver, remove the four screws at the back of the monitor. 3 Place the wall mount plate onto the monitor and align it with the screw holes. 4 Tighten the four screws to fix the plate to the monitor using a screwdriver. NOTE •• The wall mount plate is sold separately. •• For more information on installation, refer to the wall mount plate's installation guide. •• Be careful not to use excessive force when mounting the wall mount plate, as this can damage the monitor's screen. 17 Installing on the Wall 100 mm 100 mm 100 x 100 M4 x L10 4 RW120 NOTE 100 mm •• Use the screws specified by the VESA standard. •• The wall mount kit includes the installation guide and all necessary parts. •• The wall mounting bracket is optional. The accessories 100 mm To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor. Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall. 1 If you use screw longer than standard, the monitor might be damaged internally. 2 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. can be purchased at your local retail store. •• The length of the screw may differ for each wall mounting bracket. Ensure the correct length screw is used. •• For more information, please refer to the user manual for the wall mounting bracket. ENGLISH Install the monitor at least 100 mm away from the wall and leave about 100 mm of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket. Wall Mount (mm) Standard screw Number of screws Wall Mount Plate (Optional) 18 CAUTION ENGLISH •• Unplug the power cord before moving or installing the monitor to avoid electric shocks. •• Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead to injury. Please use the genuine LG wall mounting bracket. For more information, contact your local retail store or a qualified installer. •• Applying excessive force when fastening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty. •• Use the wall mounting bracket and screws that confirm to the VESA standard. Damage caused by the use or misuse of inappropriate components will not be covered by the product warranty. •• Screw length from outer surface of back cover should be under 8 mm. Wall mount plate Back of the Monitor Wall mount plate Back of the Monitor Screw Dimensions: M4 x L10 Max. 8 mm 19 USING THE MONITOR CAUTION Connecting to a PC •• This monitor supports the *Plug and Play feature. *Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure anything or install any manual drivers. HDMI connection Transmits digital video and audio signals from your PC to the monitor. Connect your PC to the monitor using the HDMI cable as shown in the illustration below. product. Otherwise, this may cause the device to malfunction. •• Connecting your PC to the monitor using the HDMI cable may cause device compatibility issues. •• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues. •• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. •• Recommended HDMI cable types -- High-Speed HDMI®/TM Cable -- High-Speed HDMI®/TM Cable with Ethernet ENGLISH •• Make sure to use the supplied HDMI cable of the 20 ENGLISH DisplayPort Connection Connecting AV Devices Transmits digital video and audio signals from your PC to the monitor. Connect the monitor to your PC using the DisplayPort cable as shown in the illustration below. HDMI Connection HDMI transmits digital video and audio signals from your AV device to the monitor. Connect your AV device to the monitor using the HDMI cable as shown in the illustration below. DP OUT NOTE •• There may be no video or audio output depending on the DP (DisplayPort) version of the PC. •• Make sure to use the supplied DisplayPort cable of the product. Otherwise, this may cause the device to malfunction. •• If you use generic cables not certified by LG, the screen may not display or there may be image noises. NOTE •• Make sure to use the supplied HDMI cable of the product. Otherwise, this may cause the device to malfunction. •• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues. •• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. •• Recommended HDMI cable types -- High-Speed HDMI®/TM Cable -- High-Speed HDMI®/TM Cable with Ethernet 21 Connecting Peripherals The USB port on the product functions as a USB hub. To use USB 3.0, connect the A-B type USB 3.0 cable of the product to the PC. Peripheral devices connected to the USB IN port can be controlled from the PC. NOTE •• Make sure to install the most recent Windows OS service pack before using the product. •• Peripheral devices are sold separately. •• A keyboard, mouse, or USB device can be connected to the USB port. •• Go to General >Quick Charge to set Quick Charge to On or Off. •• The charging speed may vary depending on the device. (sold separately) CAUTION Cautions When Using a USB Device •• A USB device with an automatic recognition program installed, or that uses its own driver, may not be recognized. •• Some USB devices may not be supported or may not work properly. •• It is recommended to use a USB hub or hard disk drive with power supplied. (If the power supply is not adequate, the USB device may not be recognized properly.) (sold separately) ENGLISH USB Cable connection - PC HDMI/DP (DisplayPort) connection 22 ENGLISH Connecting Headphones Service only port Connect peripherals to the monitor via the headphones port. Connect as illustrated. The port is used only for “Service”. SERVICE ONLY (sold separately) NOTE •• Peripheral devices are sold separately. •• If you use angled earphones, it may cause a problem with connecting another external device to the monitor. Therefore, it is recommended to use straight earphones. Angled Straight •• Depending on the audio settings of the PC and external device, headphones and speaker functions may be limited. 23 USER SETTINGS ENGLISH Activating the Main Menu 1 Press the joystick button on the bottom of the monitor. 2 Move the joystick up/down ( / ), and left/right ( / ) to set the options. 3 Press the joystick button once more to exit the main menu. Joystick Button Button Menu Status Description Main menu disabled Enables the main menu. Main menu enabled Exits the main menu. (Holding down the button to turn off the monitor. You can turn off the monitor this way at any time, including when the OSD is on.) Main menu disabled Adjusts the monitor volume level. Main menu enabled Enters the Menu features. Main menu disabled Adjusts the monitor volume level. Main menu enabled Enters the Input feature. Main menu disabled Enables the main menu. Main menu enabled Enters the Picture Mode feature. Main menu disabled Enables the main menu. Main menu enabled Turns off the monitor. 24 Main Menu Features ENGLISH Main Menu Picture Mode Menu Exit Input Monitor off Description Menu Configures the screen settings. Picture Mode Optimizes the screen for picture mode. Input Sets input mode. Monitor off Turns off the monitor. Exit Exits the main menu. Long Press: Monitor off User Settings Menu Settings 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. 2 Configure the options by moving the joystick up/down/left/right. 3 To return to the upper menu or set other menu items, move the joystick to or pressing ( /Ok) it. 4 If you want to exit the OSD menu, move the joystick to until you exit. •• When you enter the menu, instructions on how to use the button will appear in the bottom right corner of the screen. Quick Settings PBP Picture General Reset 25 Each option is described below. Quick Settings Brightness Contrast Volume Description Adjusts the color contrast and brightness of the screen. Adjusts the volume level. NOTE •• You can adjust Mute/ Unmute by moving the joystick button to in the Volume menu. Input Selects the input mode. Ratio Adjusts the aspect ratio of the screen. PBP PBP Displays the screens of two input modes on one monitor. Picture Picture Mode Changes the picture mode to the one optimized for a given feature. Picture Adjust Adjusts the Brightness Stabilization, SUPER RESOLUTION+, Sharpness, Black Level, HDMI ULTRA HD Deep Color, DFC, Response Time, Black Stabilizer, and Uniformity. Color Adjust Adjusts the Gamma, Color Temp, and Six Color. General Sets Language, SMART ENERGY SAVING, Power LED, Automatic Standby, DisplayPort 1.2, Quick Charge, Buzzer, and OSD Lock. Reset Restores the default settings. Exit Exits the OSD menu. CAUTION •• Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual. ENGLISH Menu 26 Quick Settings ENGLISH 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. 2 Go to Quick Settings by moving the joystick. 3 Configure the options following the instructions that appear in the bottom right corner. 4 To return to the upper menu or set other menu items, move the joystick to or pressing ( /Ok) it. 5 If you want to exit the OSD menu, move the joystick to until you exit . Quick Settings Brightness Quick Settings 100 > Contrast 70 > Volume PBP 30 > Input HDMI 1 > Ratio Wide > Picture General Reset / : Move / : Ok : Back Each option is described below. Menu > Quick Settings Brightness Description Adjusts the brightness of the screen. NOTE •• You can adjust the Brightness Stabilization to On/ Off by pressing the button in the Brightness menu. •• When the Brightness Stabilization is On, Brightness menus becomes disabled. •• When the Brightness Stabilization is On, SMART ENERGY SAVING and DFC menus become disabled. Contrast Adjusts the color contrast of the screen. 27 Menu > Quick Settings Description Adjusts the volume level. NOTE •• You can adjust Mute/ Unmute by moving the joystick button to in the Volume menu. Input Selects the input mode. Ratio Adjusts the aspect ratio of the screen. Wide Displays the video in widescreen, regardless of the video signal input. Original Displays video according to the aspect ratio of the video signal input. 1:1 The aspect ratio is not adjusted from the original. NOTE •• The display may look the same for Wide, Original, and 1:1 options at the recommended resolution (3840 x 2160). •• The ratio is disabled in the interlaced signal. ENGLISH Volume 28 PBP ENGLISH 1 To view the OSD menu, press the joystick button at the PBP bottom of the monitor and then enter the Menu. 2 Go to PBP by moving the joystick. 3 Configure the options following the instructions that appear in the bottom right corner. 4 To return to the upper menu or set other menu items, move the joystick to or pressing ( /Ok) it. 5 If you want to exit the OSD menu, move the joystick to until you exit . Sub Quick Settings Off > Sound Out Main > Swap PBP Sub Full Ratio > Picture General Reset PBP Preview HDMI1 / : Move / : Ok : Back Each option is described below. Menu > PBP Sub Description Displays the screens of two input modes on one monitor. PBP Connection Main Screen (Left) Sound Out Sub Screen (Right) HDMI 1 HDMI 2 DisplayPort HDMI 1 X X O HDMI 2 X X O DisplayPort O O X Changes the audio output in PBP mode. Main Selects the input for Main. Sub Selects the input for Sub. Swap Toggles between the main screen and sub screen in PBP mode. Sub Full Converts the sub screen in PBP mode to wide screen. 29 Menu > PBP Description Adjusts the aspect ratio of the main screen or sub screen. Main Sub Wide Displays the video to fit the PBP screen, regardless of the video signal input. Original Displays the video in the aspect ratio of the video signal input on the PBP screen. Wide Displays the video to fit the PBP screen, regardless of the video signal input. Original Displays the video in the aspect ratio of the video signal input on the PBP screen. NOTE •• When the Sub mode is Off, Sound Out, Swap, Sub Full, and Ratio menus become disabled. The Main / Sub options for Ratio become disabled if there is no signal. •• The optimal resolution for PBP mode is set automatically when PBP mode is set. ENGLISH Ratio 30 Picture ENGLISH 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. 2 Go to Picture by moving the joystick. 3 Configure the options following the instructions that appear in the bottom right corner. 4 To return to the upper menu or set other menu items, move the joystick to or pressing ( /Ok) it. 5 If you want to exit the OSD menu, move the joystick to until you exit . Picture Picture Mode Quick Settings Custom > Picture Adjust > Color Adjust > PBP Picture General Reset / : Move / : Ok : Back Each option is described below. Menu > Picture Picture Mode Description Custom Allows the user to adjust each element. The color mode of the main menu can be adjusted. Mono Mono (black and white) color mode. Reader Optimizes the screen for viewing documents. You can brighten the screen in the OSD menu. sRGB A standard RGB color space for the monitor and printer. Color Weakness This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish between the two colors. 31 Menu > Picture Description EBU A standard TV PAL color space for broadcasting. REC709 A standard HDTV color space for broadcasting. SMPTE-C A standard TV NTSC color space for broadcasting. DICOM A mode optimized for viewing medical images. You can brighten the screen in the OSD menu. Calibration 1 Adjusts to the last calibrated screen. Calibration 2 Adjusts to the previously calibrated screen. NOTE •• If the Picture Mode is changed in the DP (DisplayPort) input, the screen may flicker or the resolution of your PC screen may be affected. •• Calibration 2: Installation of TRUE COLOR PRO and proceeding Calibration will enable this menu. Picture Adjust Brightness Stabilization SUPER RESOLUTION+ Maintains the brightness configured of the screen. Adjusts the brightness automatically. On Off Deactivates the function, and allows the user to configure the brightness. High Optimized picture quality is displayed when a user wants crystal clear images. It is effective for high quality video or game. Middle The optimized picture quality is displayed when a user wants images between low and high modes for comfortable viewing. It is effective for UCC or SD video. Low The optimized picture quality is displayed when a user wants smooth and natural images. It is effective for slow-moving pictures or still images. Off Select this option for everyday viewing. SUPER RESOLUTION+ is turned off in this mode. ENGLISH Picture Mode 32 Menu > Picture ENGLISH Picture Adjust Description Sharpness Adjusts the sharpness of the screen. Black Level Sets the offset level (for HDMI only). •• Offset: as a reference for a video signal, this is the darkest color the monitor can display. HDMI ULTRA HD Deep Color High Keeps the current contrast ratio of the screen. Low Lowers the black levels and raises the white levels from the current contrast ratio of the screen. Provides sharper images when connected to a device supporting ULTRA HD Deep Color. 4K@ 60 Hz Support Format1) Resolution 3840 x 2160 Color Depth / Chroma Sampling Frame rate(Hz) 59.94 60.00 8 bit 10 bit YCbCr 4:2:0 YCbCr 4:2:2 YCbCr 4:4:4 RGB 4:4:4 - 1) Supported when HDMI ULTRA HD Deep Color is set to On. NOTE •• If the connected device does not support ULTRA HD Deep Color, the feature may not work properly. •• If a problem occurs, set the HDMI ULTRA HD Deep Color option to Off. DFC On Adjusts the brightness automatically according to the screen. Off Disables the DFC. 33 Menu > Picture Description Response Time Sets a response time for displayed pictures based on the speed of the screen. For a normal environment, it is recommended that you use Middle. For a fast-moving picture, it is recommended that you use High. Setting to High may cause image sticking. High Sets the response time to High. Middle Sets the response time to Middle. Low Sets the response time to Low. Off Does not use the response time improvement feature. Black Stabilizer You can control the black contrast to have better visibility in dark scenes. Increasing the Black Stabilizer value brightens the low gray level area on the screen. (You can easily distinguish objects on dark game screens.) Reducing the Black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen. Uniformity Adjusts the uniformity of screen brightness. On Enables the Uniformity feature. Off Disables the Uniformity feature. ENGLISH Picture Adjust 34 Menu > Picture ENGLISH Color Adjust Description Gamma Custom gamma settings: Gamma 1.8, Gamma 2.0, Gamma 2.2, Gamma 2.4, Gamma 2.6, DICOM Gamma Curve, Off. The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the lighter the image becomes. Color Temp Manual Custom 6500K 8500K 9300K Color Adjust Adjusts the color temperature in 500K increments. (Note that 9300K is supported rather than 9500K.) The user can customize the red, green and blue color. Sets the picture color to the color temperature of a reddish 6500K. Sets the picture color to the color temperatures of 8500K, setting to a color between red and blue. Sets the picture color to the color temperature of a bluish 9300K. Red Green You can customize the picture color using red, green and blue. Blue Six Color Reset Fulfills your color requirements by adjusting the hue and saturation of the six colors (red, green, blue, cyan, magenta and yellow). The settings are then saved. Hue Adjusts the tone of the screen colors. Saturation Adjusts the saturation of the screen colors. The lower the value, the less saturated and brighter the colors become. The higher the value, the more saturated and darker the colors become. Returns the colors to the default settings. 35 General bottom of the monitor and then enter the Menu. 2 Go to General by moving the joystick. 3 Configure the options following the instructions that appear in the bottom right corner. 4 To return to the upper menu or set other menu items, move the joystick to or pressing ( /Ok) it. 5 If you want to exit the OSD menu, move the joystick to until you exit . General Language Quick Settings PBP English > SMART ENERGY SAVING Off > Power LED Off > Automatic Standby Off > DisplayPort 1.2 Picture General Enable > Quick Charge Off > Buzzer On > OSD Lock Off > Reset / : Move / : Ok : Back Each option is described below. Menu > General Description Language Sets the menu screen to the desired language. SMART ENERGY SAVING Conserve energy by using luminance compensation algorithm. Power LED Automatic Standby High Saves energy using the high-efficiency SMART ENERGY SAVING feature. Low Saves energy using the low-efficiency SMART ENERGY SAVING feature. Off Disables the SMART ENERGY SAVING feature. Turns the power LED on the front of the monitor On or Off. On The power LED turns on automatically. Off The power LED turns off. Feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set a timer for the auto-off function. (Off, 4 H, 6 H, and 8 H) ENGLISH 1 To view the OSD menu, press the joystick button at the 36 Menu > General ENGLISH DisplayPort 1.2 Description Enables or disables DisplayPort 1.2. NOTE •• Be sure to configure this option according to the DisplayPort version supported by your graphics card. Set this option to Disable if your graphics card does not support DisplayPort 1.2. •• When DisplayPort 1.2 is disabled, you cannot use the 10-bit output of your video card. Quick Charge Buzzer OSD Lock Quick Charge is a feature that rapidly charges the device connected to the USB 3.0 port. On Enables Quick Charge. Off Disables Quick Charge. This feature lets you set the sound generated from Buzzer when your monitor powers on to On or Off. On Enables your monitor's Buzzer. Off Disables your monitor's Buzzer. This feature disables the configuration and adjustment of menus. On Enables OSD Lock. Off Disables OSD Lock. NOTE •• All features are disabled except Brightness, Contrast, Volume, Input in Quick Settings, and OSD Lock in General. 37 Reset bottom of the monitor and then enter the Menu. 2 Go to Reset by moving the joystick. 3 Configure the options following the instructions that appear in the bottom right corner. 4 To return to the upper menu or set other menu items, move the joystick to or pressing ( /Ok) it. 5 If you want to exit the OSD menu, move the joystick to until you exit . Reset Do you want to reset your settings? Quick Settings Reset Cancel PBP Picture General Reset / : Move / Each option is described below. Menu > Reset Description Do you want to reset your settings? Reset Restores the default settings. Cancel Cancel the reset. : Ok : Back ENGLISH 1 To view the OSD menu, press the joystick button at the 38 TROUBLESHOOTING ENGLISH Nothing is displayed on the screen. Is the monitor's power cord plugged in? •• Check if the power cord is correctly plugged into the power outlet. Is the power LED on? •• Check the power cable connection and press the power button. Is the power on and the power LED displaying white? •• Check that the connected input is enabled (Menu > Quick Settings > Is the power LED blinking? •• If the monitor is in sleep mode, move the mouse, or press any key on Is the OUT OF RANGE message being displayed? Is the No Signal message being displayed? Input). the keyboard, to switch the display on. •• Check if the computer is turned on. •• This occurs when signals transferred from the PC (graphics card) are out of the horizontal or vertical frequency range of the monitor. Please see the Product Specification section of this manual to set the appropriate frequency. •• This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it. The OSD Lock message is being displayed. Are some functions not available when •• The OSD is locked. Go to Menu > General and set OSD Lock to Off. you press the Menu button? The screen retains an image. Does image sticking occur even when the monitor is turned off? •• Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image. •• To extend the lifetime of the monitor, use a screensaver. Screen display is unstable and shaky. / Images displayed on the monitor leave shadow trails. Did you select the appropriate resolution? •• If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080p or the recommended resolution. 39 NOTE fluorescent lamp. The number of times the screen is refreshed per second is called vertical frequency, or refresh rate, and is represented by Hz. •• Horizontal Frequency: The time it takes to display one horizontal line is called the horizontal cycle. If 1 is divided by the horizontal interval, the result is the number of horizontal lines displayed per second. This is called horizontal frequency and is represented by kHz. •• Check if the graphics card’s resolution or frequency is within the range allowed by the monitor and set it to the recommended (optimal) resolution Control Panel > Display > Settings in Windows. (The settings may differ depending on the operating system (OS) you use.) •• Not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or misalignment of the display. •• The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the performance of the graphics card. If this is the case, contact the manufacturer of the computer or graphics card for assistance. •• Some graphics cards may not support 3840 x 2160 resolution. If the resolution cannot be displayed, contact the manufacturer of your graphics card. The display color is abnormal. Does the display appear discolored (16 colors)? Does the display color appear unstable or monochrome? Are there spots on the screen? •• Set the color to 24 bit (true color) or higher. In Windows, go to Control Panel > Display > Settings > Color Quality. (The settings may differ depending on the operating system (OS) you use.) •• Check if the signal cable is connected properly. Reconnect the cable or reinsert the PC's graphics card. •• When using the monitor, pixilated spots (red, green, blue, white, or black) may appear on the screen. This is normal for an LCD screen. It is not an error, nor is it related to the monitor's performance. Do you see an "Unrecognized monitor, Plug and Play (VESA DDC) monitor found" message? Have you installed the display driver? •• Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. •• Make sure to check if the graphics card supports Plug and Play function. No sound from the headphone port or speaker. Are images displayed using DisplayPort or •• Try increasing the volume using the button on the monitor. HDMI input without sound? •• Set the audio output of the PC to the monitor you are using. On Microsoft Windows, go to Control Panel > Hardware and Sound > Sound > set the monitor as default device. (The settings may differ depending on the operating system (OS) you use.) ENGLISH •• Vertical Frequency: In order to display an image, the screen must be refreshed dozens of times per second, like a 40 PRODUCT SPECIFICATIONS ENGLISH The product specifications are subject to change without prior notice for product improvements. “ ~ ” refers to alternating current (AC), “ ” refers to direct current (DC). LCD Screen Type TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Screen Pixel Pitch Maximum resolution 0.1554 mm x 0.1554 mm Resolution Recommended resolution Video signal Input Connectors Power Source Horizontal frequency 30 kHz to 135 kHz Vertical frequency 56 Hz to 61 Hz HDMI IN1, HDMI IN2, DP (DisplayPort) IN, H/P, USB ( Power Rating 19 V 3.42 A Power consumption AC/DC Adaptor Environmental Conditions 3840 x 2160 @ 60 Hz ) 1, 2, USB UP ( Max 65 W Sleep Mode: ≤ 0.5 W Off Mode: ≤ 0.3 W DA-65J19 type, manufactured by Asian Power Devices Inc. (APD) Input: 100-240 V~ 50-60 Hz, 1.5-0.7 A Output: 19 V 3.42 A Class I Operating Conditions Temperature 0 °C to 40 °C Storing Conditions Humidity Pressure Temperature 0 % to 80 % 700 hPa to 1060 hPa -20 °C to 60 °C Humidity Pressure 0 % to 85 % 500 hPa to 1060 hPa Dimensions (mm) Monitor Size (Width x Height x Depth) Weight (without packaging) (kg) With Stand Without Stand With Stand Without Stand 615.0 x 425.2 x 222.6 615.0 x 365.1 x 42.7 6.2 4.7 ) 41 Factory Support Mode ENGLISH DisplayPort Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 480 31.469 59.94 -/- 800 x 600 37.879 60.317 +/+ 1024 x 768 48.363 60 -/- 1152 x 864 54.347 60.05 +/+ 1280 x 720 45 60 +/+ 1280 x 1024 63.981 60.02 +/+ 1600 x 900 60 60 +/+ 1920 x 1080 67.5 60 +/- 1920 x 2160 133.32 60 +/- 2560 x 1440 3840 x 2160 3840 x 2160 88.79 66.66 133.32 59.95 30 60 +/+/+/- Polarity (H/V) Remarks Recommended resolution for PBP 42 HDMI ENGLISH Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 480 31.469 59.94 -/- 800 x 600 37.879 60.317 +/+ 1024 x 768 48.363 60 -/- 1152 x 864 54.347 60.05 +/+ 1280 x 720 45 60 +/+ 1280 x 1024 63.981 60.02 +/+ 1600 x 900 60 60 +/+ 1920 x 1080 67.5 60 +/- 1920 x 2160 133.29 60 +/- 2560 x 1440 3840 x 2160 88.79 67.5 59.95 30 +/+/- 3840 x 2160 135 60 +/- Polarity (H/V) Remarks Recommended resolution for PBP When the HDMI ULTRA HD Deep Color is set to On HDMI Timing (Video) Preset mode Horizontal Frequency (kHz) Vertical Frequency (Hz) 480p 31.5 60 720p 45.0 60 1080p 67.5 60 2160p 135 60 Power LED Mode On Mode Sleep Mode Off Mode LED Color White Flashing White Off Remarks When the HDMI ULTRA HD Deep Color is set to On To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to firstname.lastname@example.org. This offer is valid for three (3) years from the date on which you purchased the product. Read the Owner's Manual (CD) carefully and keep it at hand. Please note that the label attached to the product provides information for product support. Model Serial No. WARNING: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.