LG | 32MN58H | LG 32MN58H Owner’s Manual

Printing specification
Drawn
Checked
Approved
Signature
JIYOUNG CHOI
MIRA WOO
JONGOK KIM
MMM/DD/YYYY
May/31/2016
May/31/2016
May/31/2016
1. Model Description
Model name
:
32MN58H-P
Brand name
:
LG
Part number
Suffix
:
TR
Product name
:
Monitor TV
(Revision number)
:
MFL69560330
(1608-REV02)
2. Printing Specification
1. Trim size (Format)
:
148 mm x 210 mm (A5)
• Cover
:
1 Color (Black)
• Inside
:
1 Color (Black)
• Cover
:
Uncoated, wood-free paper 60 g/㎡
• Inside
:
Uncoated, wood-free paper 60 g/㎡
4. Bindery
:
Saddle stitching
5. Language
:
ENG (1)
6. Number of pages
:
24
2. Printing colors
3. Stock (Paper)
“This part contains Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
N
O
T
E
Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specification.
(1) Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
3. Origin Notification
LGEAK :
Printed in Kazakhstan
LGEKR :
Printed in Korea
LGERS :
Printed in Mexico
LGEAZ
:
Printed in Brazil
LGEMA :
Printed in Poland
LGESY :
Printed in China
LGEEG :
Printed in Egypt
LGEMX :
Printed in Mexico
LGETH :
Printed in Thailand
LGEIL
Printed in India
LGEND :
Printed in China
:
Printed in Vietnam
LGEVN :
LGEIN
Printed in Indonesia
:
LGERA :
Printed in Russia
Printed in Algeria
LGEAS :
Made by LG Electronics (Only TW Suffix)
LGEWR :
Printed in Poland
4. Changes
10
9
8
7
6
5
4
3
2
1
Rev. Number
Aug/11/2016 GEOMJI KIM
EKMG700215
Changed the OSD. (Soccer/Sports -> Sport/Cricket)
Jul/18/2016
EKMG700326
Changed the manual for Pre-MP.
ECO Number
Change Contents
JIYOUNG CHOI
MMM/DD/YYYY Signature
Pagination sheet
Front
Back
(ENG)
Cover
P/No.
2
…
…
…
…
23
OWNER’S MANUAL
Safety and Reference
LED MONITOR*
* LG LED Monitors are
LCD Monitors with LED Backlighting.
Please read this manual carefully before operating
your set and retain it for future reference.
32MN58H
*MFL69560330*
www.lg.com
P/NO : MFL69560330 (1608-REV02)
Printed in Korea
Table of contents
ENG
ENGLISH
3
Safety precautions
5Licenses
5
Open Source Software Notice Information
6Preparing
6
Moving and lifting the monitor
7
Installing the monitor
7
Using the joystick button
7
Mounting on a table
9
Mounting on a wall
10
Connections (Notifications)
10
Remote control
12Settings
15
Customizing setting
18Maintenance
18Troubleshooting
19Specifications
21Service
21
2
Environmental information
Safety precautions
WARNING
If you ignore the warning message, you may be seriously injured
or there is a possibility of accident or death.
CAUTION
If you ignore the caution message, you may be slightly injured or
the product may be damaged.
Precautions in installing the product
WARNING
•• Keep away from heat sources like electrical heaters.
►
shock, fire, malfunction or deformation may occur.
►Electrical
•• Keep the packing anti-moisture material or vinyl packing out of
the reach of children.
►
material is harmful if swallowed. If swallowed
►Anti-moisture
by mistake, force the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can cause suffocation. Keep
it out of the reach of children.
•• Do not put heavy objects on the product or sit upon it.
►If► the product collapses or is dropped, you may be injured.
Children must pay particular attention.
•• Do not leave the power or signal cable unattended on the
pathway.
► passerby can falter, which can cause electrical shock, fire,
►The
product breakdown or injury.
•• Install the product in a neat and dry place.
► or moisture can cause electrical shock, fire or product
►Dust
damage.
•• If you can smell smoke or other odors or hear a strange sound
unplug the power cord and contact the service center.
►If► you continue to use without taking proper measures,
electrical shock or fire can occur.
•• If you dropped the product or the case is broken, turn off the
product and unplug the power cord.
►►If you continue to use without taking proper measures,
electrical shock or fire can occur. Contact the service center.
•• Do not drop an object on or apply impact to the product. Do not
throw any toys or objects on the product screen.
►It► can cause injury to human, problem to product and damage
the display.
•• Do not let the product fall or drop when connecting it with an
external device.
► may cause injury and/or damage to the product.
►This
•• When connecting it with a game device, keep a distance of four
times as long as the diagonal measurement of the screen from
the device.
►If► the product falls because of the short cable, this may cause
injury and/or damage to the product.
ENGLISH
ENG
Please read these safety precautions carefully before using the
product.
•• Leaving a fixed image on the screen for a long time may cause
damage to the screen and cause image burn-in. To use the product
for a long period of time, use a screen saver on the PC or utilize
the residual image prevention function on the product, and when
the product is not used, turn off the power. Burn-in and related
problems are not covered by the warranty on this product.
•• Do NOT install this product on a wall where there is high risk of
exposure to oil fumes or mist.
► may damage product and cause is to fail.
►This
CAUTION
•• Make sure the product ventilation hole is not blocked. Install the
product in a suitably wide place. (more than 100 mm from the
wall)
►If► you install the product too close to the wall, it may be
deformed or fire can break out due to internal heat.
•• Do not block the ventilation hole of the product by a tablecloth
or curtain.
► product can be deformed or fire can break out due to
►The
overheating inside the product.
•• Install the product on a flat and stable place that has no risk of
dropping the product.
►If► the product is dropped, you may be injured or the product
may be broken.
•• Install the product where no EMI occurs.
•• Keep the product away from direct sunlight.
► product can be damaged.
►The
•• If you install the product in a place that does not meet the
recommended conditions, this may cause serious damage to the
product's picture quality, life cycle and appearance. Please check
with LG or a qualified installer before installing. This caution
applies to a place where there is an abundance of fine dust or oil
mist, chemical substances are used, the temperature is very high
or low, the humidity is very high, or the product is likely to remain
turned on for a long period of time (airport and train station),
failure to do so will invalidate the warranty.
•• Do not install the product in an area with poor ventilation (e.g.on
a bookshelf, in a closet) or outside and avoid placing on cushions
or carpets.
•• In addition, do not install it where there are heating objects such
as lighting equipment.
Precautions to the AC adapter and
electrical power
WARNING
•• If water or any foreign substance goes inside the product
(monitor, power cord, or AC adapter), disconnect the power cord
immediately and contact the service center.
►
this may cause a fire or electric shock due to damage
►Otherwise,
to the product.
•• Do not touch the power plug or AC adapter with wet hands. If the
pins of the plug are wet or dusty, wipe and dry them before use.
►
this may cause a fire or electric shock.
►Otherwise,
3
ENG
ENGLISH
•• Make sure to completely insert the power cord into the AC adapter.
►If► loosely connected, the poor connection may cause a fire or
electric shock.
•• Be sure to use power cords and AC adapters provided or approved
by LG Electronics, Inc.
► use of non-approved products may cause a fire or electric
►The
shock.
•• When unplugging the power cord, always pull it by the plug. Do
not bend the power cord with excessive force.
► power line can be damaged, which may cause electric shock
►The
or fire.
•• Be careful not to step or place heavy objects (electronic appliances,
clothing, etc.) on the power cord or AC adapter. Be careful not to
damage the power cord or AC adapter with sharp objects.
►
power cords may cause a fire or electric shock.
►Damaged
•• Never disassemble, repair or modify the power cord or AC adapter.
► may cause a fire or electric shock.
►This
•• Make sure to connect the power cable to the grounded current.
► may be electrocuted or injured.
►You
•• Use the rated voltage only.
► product can be damaged, or you may be electrocuted.
►The
•• In the presence of thunder and lightning, never touch the power
cord and signal cable because it can be very dangerous.
►It► can cause electric shock.
•• Do not connect several extension cords, electrical appliances
or electrical heaters to a single outlet. Use a power bar with a
grounding terminal designed for exclusive use with the computer.
►A► fire can break out due to overheating.
•• Do not touch the power plug with wet hands. Additionally, if
the cord pin is wet or covered with dust, dry the power plug
completely or wipe dust off.
► may be electrocuted due to excess moisture.
►You
•• If you don't intend to use the product for a long time, unplug the
power cable from the product.
►
dust can cause a fire, or insulation deterioration can
►Covering
cause electric leakage, electric shock or fire.
•• Fix the power cable completely.
►If► the power cable is not fixed completely, a fire can break out.
•• Do not insert a conductor (like a metal chopstick) into one end
of the power cable while the other end is connected to the input
terminal on the wall. Additionally, do not touch the power cable
right after plugging into the wall input terminal.
► may be electrocuted.
►You
•• The appliance coupler is used as the disconnect device.
•• Please make sure the device is installed near the wall outlet to
which it is connected and that the outlet is easily accessible.
•• As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if the unit is turned
off.
CAUTION
•• Be sure to keep the outlet, AC adapter, and pins of the power plug
clean from dust and etc.
► may cause a fire.
►This
4
•• Do not unplug the power cord while the product is in use.
►
shock can damage the product.
►Electrical
•• Use only the power cord supplied with the unit. If you use another
power cord, make sure that it is certified by the applicable national
standards when not provided by the supplier. If the power cable is
faulty in any way, please contact the manufacturer or the nearest
authorized repair service provider for a replacement.
Precautions in moving the product
WARNING
•• Make sure to turn off the product.
► may be electrocuted or the product can be damaged.
►You
•• Make sure to remove all cables before moving the product.
► may be electrocuted or the product can be damaged.
►You
•• Make sure the panel faces forward and hold it with both hands to
move. If you drop the product, the damaged product can cause
electric shock or fire. Contact an authorized the service center for
repair.
•• Make sure the product is turned off, unplugged and all cables
have been removed. It may take 2 or more people to carry larger
apparatus. Do not press against or put stress on the front panel of
the apparatus.
CAUTION
•• Do not shock the product when moving it.
► may be electrocuted or the product can be damaged.
►You
•• Do not dispose the product-packing box. Use it when you move.
Precautions in using the product
WARNING
•• Do not disassemble, repair or modify the product at your own
discretion.
► or electric shock accident can occur.
►Fire
►
the service center for check, calibration or repair.
►Contact
•• When the display is to be left unattended for an extended period
of time, unplug it from the wall outlet.
•• Keep the product away from water.
► or electric shock accident can occur.
►Fire
•• Do not shock or scratch the front and sides of the screen with
metallic objects.
►
it may cause damage to the screen.
►Otherwise,
•• Avoid high temperatures and humidity.
CAUTION
•• Do not put or store inflammable substances near the product.
►
is a danger of explosion or fire due to careless handling of
►There
the inflammable substances.
•• When cleaning the product, unplug the power cord and scrub
gently with a soft cloth to prevent scratching. Do not clean with a
wet cloth or spray water or other liquids directly onto the product.
An electric shock may occur. (Do not use chemicals such as
benzene, paint thinners or alcohol)
Licenses
Supported licenses may differ by model. For more information about
licenses, visit www.lg.com.
ENGLISH
ENG
•• Take a rest from time to time to protect your vision.
•• Keep the product clean at all times.
•• Take a comfortable and natural position when working with a
product to relax the muscles.
•• Take a regular break when working with a product for a long time.
•• Do not press strongly upon the panel with a hand or sharp object
such as nail, pencil or pen, or make a scratch on it.
•• Keep the proper distance from the product.
► vision may be impaired if you look at the product too
►Your
closely.
•• Set the appropriate resolution and clock by referring to the User’s
Guide.
► vision can be impaired.
►Your
•• Use authorized detergent only when cleaning the product. (Do not
use benzene, thinner or alcohol.)
►
can be deformed.
►Product
•• Do not expose to dripping or splashing and do not place objects
filled with liquids, such as vases, cups, etc. on or over the
apparatus(e.g. on shelves above the unit).
•• Batteries should not be exposed to excessive heat. For example,
keep away from direct sunlight, open fireplace and electric
heaters.
•• Do NOT place non-rechargeable batteries in charging device.
•• Using headsets (earphones) for a long time or listening loudly can
cause damage to your hearing.
•• Spray water onto a soft cloth 2 to 4 times, and use it to clean the
front frame; wipe in one direction only. Too much moisture may
cause staining.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
This DivX Certified® device has passed rigorous testing to ensure it
plays DivX® video.
To play purchased DivX movies, first register your device at
vod.divx. com. Find your registration code in the DivX VOD section of
your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including
premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX,
LLC and are used under license.
Covered by DivX Patents 7,295,673; 7,515,710; RE45,052; and
others available at [www.divx.com/patents]
•• Do not use products using high voltage around the Monitor. (ex.
Electrical Swatter)
►
may have malfunction as its electrical shock.
►Monitor
Mounting on a wall
•• Do NOT install this product by yourself as you may injure yourself
or cause damage to product. Please contact Service personnel
authorised by Manufacturer.
Open source software notice
information
To obtain the source code under GPL, LGPL, MPL, and other open
source licenses, that is contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the
date on which you purchased the product.
5
Preparing
Moving and lifting the monitor
ENG
ENGLISH
NOTE
•• Image shown may differ from your monitor.
•• The items supplied with your product may vary depending on the
model.
•• Without prior notice, all product information and specifications
contained in this manual are subject to change to improve the
performance of the product.
•• Your monitor’s OSD (On Screen Display) may differ slightly from
that shown in this manual.
•• The available menus and options may differ from the input source
or product model that you are using.
•• New features may be added to this monitor in the future.
•• For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width. Use an
extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your monitor’s USB port.
B
A
B
A
*A 10 mm
*B 18 mm
•• Use a certified cable with the HDMI logo attached. If you do
not use a certified HDMI cable, the screen may not display or a
connection error may occur.
•• Recommended HDMI cable types
-- High-Speed HDMI®/™ cable
-- High-Speed HDMI®/™ cable with Ethernet
When moving or lifting the monitor, follow these instructions to
prevent the monitor from being scratched or damaged and to ensure
safe transportation, regardless of its shape or size.
•• It is advisable to place the monitor in the original box or packing
material before attempting to move it.
•• Before moving or lifting the monitor, disconnect the power cord
and all cables.
•• Hold the top and bottom of the monitor frame firmly. Do not hold
the panel itself.
•• When holding the monitor, the screen should face away from you
to prevent it from being scratched.
•• When transporting the monitor, do not expose the monitor to jolts
or excessive vibration.
•• When moving the monitor, keep it upright and never turn the
monitor on its side or tilt it sideways.
CAUTION
•• Always use genuine components to ensure safety and product
performance.
•• The product warranty will not cover damage or injury caused by
the use of unauthorized components.
6
CAUTION
•• Image shown may differ from your monitor.
•• Avoid touching the monitor screen as much as possible. Do not
apply pressure.
- This may result in damage to the screen or some of the pixels
used to create images.
•• Do not carry the monitor upside-down by holding the stand body
(or stand base) as this may cause it to fall off, resulting in damage
or injury.
•• When handling the monitor, be careful not to damage the
protruding joystick button.
Installing the monitor
CAUTION
NOTE
•• Remove the stand before installing the monitor on a wall mount
by performing the stand attachment in reverse.
•• To protect the screen from scratches, cover the surface with a soft
cloth.
Using the joystick button
Adjusting the menu
ENGLISH
ENG
•• When attaching the stand to the monitor set, place the screen
facing down on a cushioned table or flat surface to protect the
screen from scratches.
•• Applying excessive force when tightening screws may cause
damage to the monitor. Damage caused in this way will not be
covered by the product warranty.
•• If you use the monitor panel without the stand base, its joystick
button may cause the monitor to become unstable and fall,
resulting in damage to the monitor or human injury. In addition,
this may cause the joystick button to malfunction.
CAUTION
•• When your finger over the joystick button and push it to the up,
down, left or right, be careful not to press the joystick button.
When the monitor is turned on, press the joystick button one time.
You can adjust the menu items moving the joystick button up, down,
left, or right.
Turns the power off.
Accesses the main menu.
Clears on-screen displays and returns to monitor viewing.
Changes the input source.
Mounting on a table
•• Image shown may differ from your monitor.
1Lift the monitor and place it on the table in an upright position.
- Place at least 100 mm away from the wall to ensure sufficient
ventilation.
You can simply operate the monitor functions, pressing or moving the
joystick button up, down, left or right.
100 mm
100 mm
100 mm
100 mm
Joystick Button
Basic functions
Power on
Power off
Volume
control
Menu
control
When the monitor is turned off,
place your finger on the joystick
button and press it once and
release it.
When the monitor is turned on,
place your finger on the joystick
button, press it once for a few
seconds and release it. (However, if
the menu button is on the screen,
pressing and holding the joystick
button will let you exit the menu.)
If you place your finger over the
joystick button and move it left or
right, you can adjust the volume
level you want.
2 Connect the AC-DC Adapter and Power Cord to a wall outlet.
CAUTION
•• Do not place the monitor near or on sources of heat, as this may
result in fire or other damage.
•• To avoid the risk of electric shock, disconnect the Power Cord
before moving or installing the monitor.
If you place your finger over the
joystick button and move it up or
down, you can change the menu.
7
Adjusting the angle of the monitor to
suit view
2 As shown in the figure, use a flat tool to remove the cover.
Example: Slot (-) type screwdriver
ENG
ENGLISH
•• Image shown may differ from your monitor.
Tilt from -5° to 10° degrees up or down to adjust the angle of the
monitor to suit your view.
-5°
Front
10°
Rear
CAUTION
•• When you adjust the angle, do not hold the buttom of the monitor
frame as shown on the following illustration, as may injure your
fingers.
Installing the wall mounting bracket
support
As shown below, detach the stand bracket before installing the wall
mounting bracket support.
1 Lay the monitor down on a flat surface with the panel facing
down. Before that, lay down a soft cloth or a cushion first so as to
prevent damage to the panel.
Back
Stand
bracket
8
Cover
3 Remove the screws and detach the stand bracket.
Using the kensington security system
ENGLISH
ENG
(This is not available for all models.)
•• Image shown may differ from your monitor.
The Kensington security system connector is located at the rear of the
monitor. For more information of installation and using, refer to the
manual provided with the Kensington security system or visit
http://www.kensington.com.
Connect the Kensington security system cable between the monitor
and a table.
CAUTION
•• Disconnect the power cord first, and then move or install the
monitor. Otherwise electric shock may occur.
•• If you install the monitor on a ceiling or slanted wall, it may fall
and result in severe injury.
•• Use an authorized LG wall mount and contact the local dealer or
qualified personnel.
•• Do not over tighten the screws as this may cause damage to the
monitor and void your warranty.
•• Use the screws and wall mounts that meet the VESA standard. Any
damages or injuries by misuse or using an improper accessory are
not covered by the warranty.
•• Screw length from outer surface of back cover should be under
8 mm.
NOTE
NOTE
•• The Kensington security system is optional. You can obtain
additional accessories from most electronics stores.
Mounting on a wall
•• Use the screws that are listed on the VESA standard screw
specifications.
•• The wall mount kit includes an installation manual and necessary
parts.
•• The wall mount bracket is not provided. You can obtain additional
accessories from your local dealer.
•• The length of screws may differ depending on the wall mount.
Make sure to use the proper length.
•• For more information, refer to the manual supplied with the wall
mount.
Install the monitor at least 100 mm away from the wall and leave
about 100 mm of space at each side of the monitor to ensure
sufficient ventilation. Detailed installation instructions can be
obtained from your local retail store. Alternatively, please refer to the
manual for how to install and set up a tilting wall mounting bracket.
100 mm
100 mm
100 mm
100 mm
To install the monitor to a wall, attach a wall mounting bracket
(optional) to the back of the monitor. Make sure that the wall
mounting bracket is securely fixed to the monitor and to the wall.
1If you use screws longer than the standard length, it may
damage the inside of the product.
2A non-VESA standard screw may damage the product and cause
the monitor to fall. LG Electronics is not liable for any accidents
relating to the use of non-standard screws.
Model
Wall Mount
(A x B)
32MN58H
A
B
Standard screw
Number of screws
Wall mount bracket
(optional)
200 x 100
M4 x L10
4
RW240
9
ENG
ENGLISH
Connections (Notifications)
Remote control
Connect various external devices to the monitor and switch input
modes to select an external device. For more information about an
external device’s connection, refer to the manual supplied with each
device. Available external devices are: HD receivers, DVD players,
VCRs, audio systems, USB storage devices, PC, gaming devices, and
other external devices.
The descriptions in this manual are based on the buttons on the
remote control.
Please read this manual carefully and use the monitor correctly. To
replace batteries, open the battery cover, replace batteries
(1.5 V AAA) matching the
and ends to the label inside the
compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
NOTE
•• For the best picture quality, connect the external device and the
monitor with the HDMI cable.
•• The monitor may flicker when turned on in an area where the
temperature is low. This is normal.
•• Sometimes red, green, or blue spots may appear on the screen.
This is normal.
•• Do not press the screen for a prolonged time. This may cause
image distortion.
•• Do not display a still image on the screen for a prolonged time.
This may cause image retention. Use a screensaver if possible.
•• The external device connection may differ from the model.
CAUTION
•• Do not mix old and new batteries, as this may damage the remote
control.
•• This remote uses infrared light. When in use, it should be pointed
in the direction of the monitor’s remote sensor.
A
Connecting to a PC
B
NOTE
•• If you want to use HDMI-PC mode, you must set the Input Label
to PC mode.
•• The setting can be changed in SETTINGS ➾ OPTION ➾ Input
Label.
Other connections
Some separate cable is not provided.
For the best picture and audio quality, connect the external device
and the monitor with the HDMI cable.
•• USB port supports 0.5 A electric current. If you need more electric
current in case of HDD, use the separate power adaptor.
A
(Power) Turn the power on or off.
Resizes an image.
Changes the input source.
B
Adjusts the volume level.
Select the desired contents file in the USB device.
Mutes all sounds.
Moves to the previous or next screen.
10
C
ENGLISH
ENG
D
C
Changes the image mode.
Check the current input information.
Changes the sound mode. (Depending on model)
Accesses the main menu.
Accesses the quick menus.
Navigation buttons (up/down/left/right) Scrolls through menus
or options.
Selects menus or options and confirms your input.
Returns to the previous screen.
Clears all on-screen displays and returns to monitor viewing.
D
Control buttons (
)
Coloured buttons These access special functions in some menus.
(
: Red,
: Green,
: Yellow,
: Blue)
(Backlight) Adjusts the brightness of the screen by
controlling the screen backlight.
11
Settings
ENG
ENGLISH
Adjusting aspect ratio
Resize an image to view at its optimal size by pressing Q.MENU or
accessing Aspect Ratio in the PICTURE menu.
NOTE
•• The available ratio varies depending on the input source.
•• If you select Just Scan, you may see image noises at the edge of
the original signal.
•• If you enlarge or reduce an image, the image may be distorted.
Selecting an input source
1 Press INPUT to access the input sources. The connected device
displays on each input source.
2 Press the Navigation buttons or INPUT button to scroll to one
of the input sources and press OK .
Entertainment
(Depending on model)
Setting USB AutoRun
SETTINGS ➾ OPTION ➾ USB AutoRun
Play photos or videos of USB automatically when monitor is turned
on or USB is connected.
•• Off : Turn off the USB AutoRun.
•• Movie : Play videos of USB automatically.
•• Photo : Play photos of USB automatically.
•• Only plays the files in the top level folder of the USB device in
sequence.
•• While playing, press the BACK or EXIT button on the remote
control to end this function.
•• If the files are invalid or corrupted, the following message appears
before returning to the previous input status: “This file is invalid.”
•• When the USB device is reconnected after being disconnected
during video playback, Continue watching starts automatically
and resumes the video from the last viewed scene (only applies to
the first video).
Connecting USB storage devices
CAUTION
•• Do not turn the monitor off or remove a USB storage device while
the USB storage device is connected to the monitor, as this could
result in loss of files or damage to the USB storage device.
•• Back up your files saved on a USB storage device frequently, as you
may lose or damage the files and this may be not covered by the
manufacturer’s warranty.
12
Connect USB storage devices (USB memory) to the monitor and use
multimedia features. Connect a USB flash memory or USB memory
card reader to the monitor. To disconnect a USB storage device,
make sure to end the connection properly to prevent damages to the
monitor or files.
1 Press Q.MENU to access the quick menus.
2 Press the Navigation buttons to scroll to Eject and press
OK .
3 Disconnect the USB storage device only when the message says
that it is safe to remove.
Tips for using USB storage devices
•• Only a USB storage device is recognizable.
•• If the USB storage device is connected through a USB hub, the
device is not recognizable.
•• A USB storage device using an automatic recognition programme
may not be recognized.
•• A USB storage device which uses its own driver may not be
recognized.
•• The recognition speed of a USB storage device may depend on
each device.
•• Please do not turn off the monitor or unplug the USB device when
the connected USB storage device is working. When such device
is suddenly separated or unplugged, the stored files or the USB
storage device may be damaged.
•• Please do not connect the USB storage device which was
artificially manoeuvred on the PC. The device may cause the
product to malfunction or fail to be played. Never forget to use
only a USB storage device which has normal music files, image
files or movie files.
•• Please use only a USB storage device which was formatted as a
FAT16, FAT32, NTFS file system.
•• Please connect a USB storage device with the cable offered by the
device maker.
•• Some USB storage devices may not be supported or operated
smoothly.
•• Be sure to back up important files since data stored in a USB
memory device may be damaged. We will not be responsible for
any data loss.
•• If a USB memory device is connected to a USB multi-card reader,
its volume data may not be detected.
•• If the USB memory device does not work properly, disconnect and
reconnect it.
•• How fast a USB memory device is detected differs from device to
device.
•• The recommended capacity is 1 TB or less for a USB external hard
disk and 32 GB or less for USB memory.
•• Any device with more than the recommended capacity may not
work properly.
•• USB storage devices below USB 2.0 are supported as well. But they
may not work properly in the movie list.
•• Maximum of 999 folders or files can be recognized under one
folder.
•• If there are a lot of folders or files all within one folder, the device
may not be able to access these properly.
•• For external USB HDDs, it is recommended that you use devices
with a rated voltage of less than 5 V and a rated current of less
than 0.5 A.
Viewing photos
Type
Photo
View image files saved in a USB storage device. The displays on the
screen may differ from the model.
Music
Movie
Supported file format
JPEG
Available size
Baseline :
64 pixel (W) x 64 pixel (H)
- 15360 pixel (W) x 8640 pixel (H)
Progressive : 64 x 64 to 1024 x 768
•• You can play JPEG files only.
•• Non-supported files are displayed in the form of
predefined icon.
MP3
Bit rate : 32 kbps to 320 kbps
•• Sampling rate MPEG1 Layer3 : 32 kHz, 44.1 kHz,
48 kHz
•• Sampling rate MPEG2 Layer3 : 16 kHz, 22.05 kHz,
24 kHz
•• Sampling rate MPEG2.5 Layer3 : 8 kHz, 11.025 kHz,
12 kHz
DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,TRP,TP,ASF,
WMV,FLV,RM,RMVB
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/
*.mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/
*.flv/*.avi(motion-jpeg)/*.mp4(motion-jpeg)/
*.mkv(motion-jpeg)/*.rm/*.rmvb) supporting file
Video format : DivX 3.11, DivX4, DivX5, DivX6,
Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10
beta-1/beta-2, Mpeg-1, Mpeg-2, Mpeg-4, H.264/
AVC, VC1, JPEG, Sorenson H.263
Audio format : Dolby Digital, Mpeg, MP3, LPCM,
ADPCM, WMA, AAC
Bit rate : within 32 kbps to 320 kbps(MP3)
External Subtitle format : *.smi/*.srt/
*.sub(MicroDVD, Subviewer1.0/2.0)/*.ass/*.ssa/
*.txt(TMPlayer)/*.psb(PowerDivX)
Internal Subtitle format : only, XSUB (It is the
subtitle format used in DivX6 files.)
NOTE
•• Non-supported files are displayed the preview image by icon only
.
•• Abnormal files are displayed in the form of bitmap
.
•• Slideshow : Starts or stops a slideshow with selected photos.
If there are no selected photos, all photos saved in the current
folder display during a slideshow. To set a slideshow speed, select
Option.
•• BGM : Turns the background music on or off. To set the background
music folder, select Option.
•• (Rotate) : Rotates photos clockwise (90°, 180°, 270°, 360°).
-- The supported photo size is limited. You cannot rotate a photo if
the resolution of the rotated width is larger than the supported
resolution size.
•• Hide : Hides the option window. To display the options, press
OK .
Q.MENU options for photo list
1 Press Q.MENU. A pop-up window will appears.
2 Press the Navigation buttons to scroll to Set photo view.
and press OK .
3 Press the Navigation buttons to scroll to one of the following
options and press OK .
Set photo view.
•• Slide Speed : Selects a slideshow speed (Fast, Normal, Slow).
•• Music Folder : Selects a music folder for the background music.
Set video.
Allows you to change video presets.
Set audio. (Depending on model)
Allows you to change audio presets.
Listening to music
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to ENTERTAINMENT
and press OK .
3 Press the Navigation buttons to scroll to MUSIC LIST and
press OK .
4 Press the Navigation buttons to scroll to a folder/file you want
and press OK .
5 Play music by using the following menus/buttons.
13
ENGLISH
ENG
Supported file format
Q.MENU options for music list
Press Q.MENU. A pop-up window will appears.
ENG
ENGLISH
Set audio. (Depending on model)
Allows you to change Audio presets.
NOTE
•• The monitor will not play copy protected files.
•• If the monitor is not in use for some time during playback, the
information box as a screensaver will appear to prevent image
burn. To return to the MUSIC LIST screen, press OK or
BACK.
Viewing movies
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to ENTERTAINMENT
and press OK .
3 Press the Navigation buttons to scroll to MOVIE LIST and
press OK .
4 Press the Navigation buttons to scroll to a folder/file you want
and press OK .
5 Play movie by using the following menus/buttons.
Tips for using playing video files
•• Some user-created subtitles may not work properly.
•• Some special characters are not supported in subtitles.
•• HTML tags are not supported in subtitles.
•• Subtitles in languages other than the supported languages are
not available.
•• Changing font and colour in subtitles is not supported.
•• Subtitles in languages other than one specified are not supported.
•• Video files with subtitle files of 1 MB or larger may not be played
properly.
•• The screen may suffer temporary interruptions (image stoppage,
faster playback, etc.) when the audio language is changed.
•• A damaged movie file may not be played correctly, or some player
functions may not be usable.
•• Movie files produced with some encoders may not be played
correctly.
•• If the video and audio structure of recorded file is not interleaved,
either video or audio is outputted.
•• HD videos with a maximum of 1920 x 1080 @ 25/30p or 1280 x
720 @ 50/60p are supported, depending on the frame.
•• Videos with resolutions higher than 1920 x 1080 @ 25/30p or 1280
x 720 @ 50/60p may not work properly depending on the frame.
•• Movie files other than the specified types and formats may not
work properly.
•• Max bitrate of playable movie file is 20 Mbps. (only, Motion JPEG
: 10 Mbps)
•• We do not guarantee smooth playback of profiles encoded level
4.1 or higher in H.264/AVC.
•• DTS Audio codec is not supported.
•• A movie file more than 30 GB in file size is not supported for
playback. The file size limit is dependent on the encoding
environment.
14
•• A DivX movie file and its subtitle file must be located in the same
folder.
•• A video file name and its subtitle file name must be identical for it
to be displayed.
•• Playing a video via a USB connection that doesn’t support high
speed may not work properly.
•• Files encoded with GMC (Global Motion Compensation) and Qpel
(Quarterpel Motion Estimation) may not be played.
•• Trick Mode does not support other functions than if video files do
not have index information.
•• Video file names that contain special characters may not be
playable.
Video options
1 Press Q.MENU to access the pop-up menus.
2 Press the Navigation buttons to scroll to Set video play.,
Set video. or Set audio. (Depending on model) and press
OK .
When you select the Set video play.
1 Press the Navigation buttons to scroll to show the Picture
Size, Audio Language, Subtitle.
2 Press the Navigation buttons to scroll to make appropriate
adjustments.
Menu
Picture Size
Audio Language
Subtitle
Language
Code Page
Sync
Description
Selects your desired picture format during
movie play.
Changes the Language Group of the audio
during movie play. Files with a single audio
track cannot be selected.
Turn on/off the subtitle.
Activated for SMI subtitle and can select the
language within the subtitle.
Can select the font for subtitle. When set
to default, same font as general menu will
be used.
Adjusts the time synchronisation of the
subtitle from -10 secs to +10 secs by steps of
0.5 secs during movie play.
NOTE
•• Only 10,000 of sync blocks can be supported within the subtitle
file.
•• When playing a video, you can adjust the Picture Size by pressing
Q.MENU or accessing Aspect Ratio in the PICTURE menu.
When you select the Set video.
Press the Navigation buttons to scroll to make appropriate
adjustments.
When you select the Set audio.
DivX® VOD Guide
DivX® VOD Registration
In order to play purchased or rented DivX® VOD contents, you should
register your device with 10 digit DivX registration code from your
device at www.divx.com/vod.
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to ENTERTAINMENT
and press OK .
3 Press the Navigation buttons to scroll to DivX(R) VOD and
press OK .
4 Press the Navigation buttons to scroll to Registration and
press OK .
5 View the registration code of your monitor.
6 When you are finished, press EXIT. When you return to the
previous menu, press BACK.
NOTE
•• Movie files are supported as follows.
•• Resolution : under 1920 x 1080 (W x H) pixels
•• Frame rate : under 30 frames/sec
•• Video Codec : MPEG 1, MPEG 2, MPEG 4, H.264/AVC, DivX 3.11,
DivX4, DivX5, DivX6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03,
Xvid 1.10-beta1, Xvid 1.10-beta2, JPEG, VC1, Sorenson H.263/H.264.
DivX® VOD Deregistration
You should deregister your device with 8 digit DivX deregistration
code from your device at www.divx.com/vod.
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to ENTERTAINMENT
and press OK .
3 Press the Navigation buttons to scroll to DivX(R) VOD and
press OK .
4 Press the Navigation buttons to scroll to Deregistration and
press OK .
5 Press the Navigation buttons to select Yes to confirm.
6 When you are finished, press EXIT. When you return to the
previous menu, press BACK.
NOTE
•• Once the deregistration is executed, you must register your device
again to see DivX® VOD contents.
Customizing setting
PICTURE Settings
ENGLISH
ENG
(Depending on model)
1 Press the Navigation buttons to scroll to show the Sound
Mode, Auto Volume, Balance.
2 Press the Navigation buttons to scroll to make appropriate
adjustments.
NOTE
•• Depending on input signal or other picture settings, the range of
detailed items for adjustment may differ.
SETTINGS ➾ PICTURE ➾ Aspect Ratio
Changes the image size to view images at its optimal size.
SETTINGS ➾ PICTURE ➾ Energy Saving
Reduces the power consumption by adjusting the screen brightness.
•• Off : The Energy Saving is off.
•• Minimum/Medium/Maximum : Selects the brightness level.
•• Screen off : The screen turns off in 3 seconds.
NOTE
•• When you select Screen Off, the screen will be turned off in
3 seconds and Screen Off will start.
•• If you adjust “Energy Saving Maximum”, Backlight feature
will not work.
SETTINGS ➾ PICTURE ➾ Picture Mode
Selects one of the preset image or customizes options in each
mode for the best monitor screen performance. You are also able to
customize advanced options of each mode.
•• Vivid : Adjusts the video image for the retail environment by
enhancing the contrast, brightness, colour, and sharpness.
•• Standard : Adjusts the image for the normal environment.
•• Cinema : Optimizes the video images for a cinematic look to enjoy
movies as if you are in a movie theatre.
•• Sport / Cricket : [Depending on model] Optimizes the video
image for high and dynamic actions by emphasizing primary
colours such as white, grass, or sky blue.
•• Game : Optimizes the video image for a fast gaming screen such
as PCs or games.
SETTINGS ➾ PICTURE ➾ Eye Comfort Mode
If you turn this option on, color temperature will be automatically
adjusted to reduce eye strain.
•• On : Automatically adjusts the screen color temperature.
•• Off : Turns off the Eye Comfort Mode.
SETTINGS ➾ PICTURE ➾ Screen(RGB-PC)
•• Customizes the PC display options in RGB mode.
•• Resolution : Sets the desired resolution. Options may only be
selected when the PC resolution is set to 1024 x 768 @ 60/
1280 x 768 @ 60/1360 x 768 @ 60/ 1366 x 768 @ 60 (default).
•• Auto config. : Sets to adjust the screen position, clock, and phase
automatically. The displayed image may be unstable for a few
seconds while the configuration is in progress.
•• Position/Size/Phase : Adjusts the options when the picture
is not clear, especially when characters are shaky, after the auto
configuration.
•• Reset : Restores the options to the default setting.
15
Basic image options
ENG
ENGLISH
•• Backlight : Adjusts the brightness of the screen by controlling
the LCD backlight. If you decrease the brightness level, the screen
becomes darker and the power consumption will be reduced
without any video signal loss.
•• Contrast : Increases or decreases the gradient of the video signal.
You may use Contrast when the bright part of the picture is
saturated.
•• Brightness : Adjusts the base level of the signal in the picture.
•• Sharpness : Adjusts the level of crispness in the edges between
the light and dark areas of the picture. The lower the level, the
softer the image.
•• Colour : Adjusts intensity of all colours.
•• Tint : Adjusts the balance between red and green levels.
•• Colour Temperature : Choose one of three automatic colour
adjustments. Set to warm to enhance hotter colours such as red,
or set to cool to see less intense colours with more blue. You can
control red, green, blue to adjust colour details.
•• Advanced Control : Customizes the advanced options.
•• Reset : Restores the options of each mode to the factory default.
Advanced image options
(Depending on model)
•• Dynamic Contrast : Adjusts the contrast to keep it at the best
level according to the brightness of the screen. The picture is
improved by making bright parts brighter and dark parts darker.
•• Dynamic Colour : Adjusts screen colours so that they look livelier,
richer and clearer. This feature enhances hue, saturation and
luminance so that red, blue and green white look more vivid.
•• Noise Reduction : Reduces screen noise without compromising
video quality.
•• Gamma : You can adjust brightness of dark area and middle gray
level area of the picture.
-- Low : Make the dark and middle gray level areas brighter.
-- Medium : Express the original picture level.
-- High : Make the dark and middle gray level area darker.
•• Black Level : Adjusts the brightness and contrast of the screen
to suit the black level of the input picture by using the blackness
(black level) of the screen.
•• Motion Eye Care : Adjusts screen brightness to prevent eye glare.
•• Film Mode : Makes video clips recorded in film look more natural.
This feature operates only in 480i / 576i / 1080i / 1080p (24 Hz)
resolution.
•• Colour Gamut : Advanced Control Maximizes the utilization of
colour to increase colour quality.
-- Standard: Displays standard set of colours.
-- Wide: Increase number of colours used.
•• Edge Enhancer : Shows clearer and distinctive yet natural edges
of the video.
16
AUDIO Settings (Depending on model)
SETTINGS ➾ AUDIO ➾ Auto Volume
Activates the Auto Volume feature to keep the volume level
consistent.
SETTINGS ➾ AUDIO ➾ Balance
Adjust balance between the left and right speakers according to your
room environment.
SETTINGS ➾ AUDIO ➾ Sound Mode
Selects one of the preset sound modes or customizes options in each
mode.
•• Standard : Select when you want standard-quality sound.
•• Music : Select when you listen to music.
•• Cinema : Select when you watch movies.
•• Sport / Cricket : [Depending on model] Select when you watch
sports events.
•• Game : Select when you play games.
-- Treble : Controls the dominant sounds in the output. When
you turn up the treble, it will increase the output to the higher
frequency range.
-- Bass : Controls the softer sounds in the output. When you turn
up the bass, it will increase the output to the lower frequency
range.
-- Reset : Resets the sound mode to the default setting.
TIME Settings
SETTINGS ➾ TIME ➾ Clock
Sets the time.
SETTINGS ➾ TIME ➾ Off Time/On Time
Sets the time to turn on or off the monitor automatically. To use this
function, you should set the current time and date in advance.
NOTE
•• If you do not press any button within 2 hours after the monitor
turns on by the On Time feature, the monitor enters the standby
mode automatically.
•• If you set both Off time and On time features to the same time,
the Off time feature overrides the On time feature.
SETTINGS ➾ TIME ➾ Sleep Timer
Sets the length of time until the monitor to turns off. When you turn
the monitor off and turn it on again, the Sleep timer feature will be
set to off.
SETTINGS ➾ TIME ➾ Auto Off(On Time)
If On Time is enabled, the monitor will be turned on at the specified
time. If you do not operate the monitor for two hours, the monitor
will be turned off automatically.
SETTINGS ➾ TIME ➾ Automatic Standby (Depending on model)
If you do not press any button on the monitor or remote control for
a certain period, the monitor will automatically switch to standby
mode.
OPTION Settings
ENGLISH
ENG
SETTINGS ➾ OPTION ➾ Menu Language
Selects a desired language.
SETTINGS ➾ OPTION ➾ Input Label
Indicates which device is connected to which input port.
SETTINGS ➾ OPTION ➾ Factory Reset
Customizes the monitor settings to suit your preference. The initial
setup screen will appear when you turn on the monitor for the first
time.
•• Home Use : Selects it for the Home environment.
•• Store Demo : Selects it for the retail environment.
LOCK Settings
SETTINGS ➾ LOCK ➾ Lock System
Activates or deactivates the lock system.
SETTINGS ➾ LOCK ➾ Set Password
Changes the 4-digit password. The default PIN is “0 0 0 0”.
SETTINGS ➾ LOCK ➾ Input Block
Blocks the input sources.
ENTERTAINMENT Settings
SETTINGS ➾ ENTERTAINMENT ➾ Photo List
View image files(photos) on monitor which are stored on USB device.
SETTINGS ➾ ENTERTAINMENT ➾ Music List
Play back music files on monitor which are stored on USB device.
SETTINGS ➾ ENTERTAINMENT ➾ Movie List
Play movie files on monitor which are stored on usb device.
SETTINGS ➾ ENTERTAINMENT ➾ Game (Depending on model)
Play game contents on your monitor.
SETTINGS ➾ ENTERTAINMENT ➾ DivX(R) VOD
View the registration code of your monitor.
17
Maintenance
Cleaning your monitor
ENG
ENGLISH
Clean your monitor regularly to keep the best performance and to
extend the product lifespan.
•• Make sure to turn the power off and disconnect the power cord
and all other cables first.
•• When the monitor is left unattended and unused for a long time,
disconnect the power cord from the wall outlet to prevent possible
damage from lightning or power surges.
Screen, frame, cabinet, and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and
soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened
in clean water or a diluted mild detergent. Then wipe immediately
with a dry cloth.
•• Avoid touching the screen at all times, as this may result in
damage to the screen.
•• Do not push, rub, or hit the surface with your fingernail or a sharp
object, as this may result in scratches on the screen and image
distortions.
•• Do not use any chemicals as this may damage the product.
•• Do not spray liquid onto the surface. If water enters the monitor, it
may result in fire, electric shock, or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
Preventing “Image burn” or “Burn-in” on
your monitor screen
•• If a fixed image displays on the monitor screen for a long period of
time, it will be imprinted and become a permanent disfigurement
on the screen. This is “image burn” or “burn-in” and not covered by
the warranty.
•• If the aspect ratio of the monitor is set to 4:3 for a long period of
time, image burn may occur on the letterboxed area of the screen.
NOTE
•• Avoid keeping a fixed image on the set’s screen for prolonged
periods of time. The fixed image may become permanently
imprinted on the screen. Use a screen saver when possible.
•• There may be interference relating to resolution, vertical pattern,
contrast or brightness in PC mode. Change the PC mode to another
resolution or change the refresh rate to another rate or adjust the
brightness and contrast on the menu until the picture is clear. If
the refresh rate of the PC graphic card can not be changed, change
the PC graphic card or consult the manufacturer of the PC graphic
card.
•• If using a sound card, adjust PC sound as required.
•• DOS mode may not work depending on the video card if you use
an HDMI to DVI cable.
18
Troubleshooting
Cannot control the monitor with the remote control.
•• Check the remote control sensor on the product and try again.
•• Check if there is any obstacle between the product and the remote
control.
•• Check if the batteries are still working and properly installed
( to , to ).
No image display and no sound is produced.
•• Check if the product is turned on.
•• Check if the power cord is connected to a wall outlet.
•• Check if there is a problem in the wall outlet by connecting other
products.
The monitor turns off suddenly.
•• Check the power control settings. The power supply may be
interrupted.
•• Check if the Automatic Standby (Depending on model) /
Sleep Timer / Off Time is activated in the TIME settings.
•• If there is no signal while the monitor is on, the monitor will turn
off automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI), ‘NO SIGNAL’ or ‘Invalid
Format’ is displayed.
•• Turn the monitor off/on using the remote control.
•• Reconnect the HDMI cable.
•• Restart the PC with the monitor on.
If monitor is turned off automatically.
•• If On Time is enabled, the monitor will be turned on at the
specified time. If you do not operate the monitor for two hours,
the monitor will be turned off automatically.
•• To disable this function, use your remote control to go to
SETTINGS TIME Auto Off(On Time) Off.
Specifications
Product specifications may be changed without prior notice due to upgrade of product functions.
32MN58H
Dimensions (Width x Height x Depth)
Weight
With Stand (mm)
726.6 x 491.9 x 204.8
Without Stand (mm)
726.6 x 435.9 x 94.1
With Stand (kg)
6.5
Without Stand (kg)
6.0
Power consumption (Outgoing condition)
45 W
Power requirement
19 V
AC/DC Adapter
Manufacturer: APD
Model: DA-48F19
In : AC 100 – 240 V ~ 50/60 Hz
Out : DC 19 V
2.53 A
Environment condition
ENGLISH
ENG
Model
2.3 A
Operating Temperature
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
19
RGB (PC) supported mode
Resolution
ENG
ENGLISH
640 x 480
800 x 600
1024 x 768
1152 x 864
1280 x 1024
1600 x 900
1680 x 1050
1920 x 1080
HDMI supported mode
Horizontal
Frequency (kHz)
31.469
37.879
48.363
54.34
63.981
55.54
64.674
Vertical
Frequency (Hz)
59.940
60.317
60.000
60.050
60.020
60.000
59.883
65.290
67.5
59.954
60.000
HDMI (PC) supported mode
Vertical
Frequency (Hz)
70.080
59.940
37.500
37.879
75.000
60.317
46.875
48.363
75.000
60.004
1024 x 768
56.476
70.069
1152 x 864
1280 x 720
1280 x 800
60.023
67.500
45.000
49.702
63.981
75.029
75.000
60.000
59.810
60.020
79.976
65.317
55.935
60.000
64.674
75.025
59.978
59.887
60.000
59.883
65.290
67.500
59.954
60.000
720 x 400
640 x 480
800 x 600
1280 x 1024
1400 x 1050
1440 x 900
1600 x 900
1680 x 1050
1920 x 1080
NOTE
•• The optimal display resolution is 1920 x 1080 @ 60 Hz.
•• The optimal timing in each mode is vertical frequency 60 Hz.
20
Vertical
Frequency (Hz)
59.940
720 x 576
31.500
31.250
37.500
60.000
50.000
50.000
1280 x 720
44.960
59.940
45.000
33.720
60.000
59.940
33.750
60.000
28.125
50.000
27.000
24.000
33.750
30.000
56.250
50.000
67.430
59.940
67.500
60.000
720 x 480
1920 x 1080
Horizontal
Frequency (kHz)
31.468
31.469
Resolution
Horizontal
Frequency (kHz)
31.469
Resolution
Environmental information
Unplug the monitor from the wall outlet and refer servicing to
qualified service personnel when :
Information for environmental preservation
•• The power cord or plug is damaged or frayed.
•• Liquid has been spilled into the monitor.
•• The monitor has been exposed to rain or water.
•• The monitor does not operate normally following the operating
instructions. Adjust only those controls that are covered in the
operating instructions. An improper adjustment of other controls
may result in damage and often requires extensive work by a
qualified technician to restore the monitor to normal operation.
•• The monitor has been dropped or the cabinet has been damaged.
•• The monitor exhibits a distinct change in performance.
•• Snapping or popping from the monitor is continuous or frequent
while the monitor is operating. It is normal for some monitors to
make occasional sounds when being turned on or off, or when
changing video modes.
Do not attempt to service the monitor yourself, as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
LGE. announced the ‘LG Declaration for a Cleaner Environment’ in
1994, and this ideal has served as a guiding managerial principle
ever since. The Declaration is a foundation that has allowed us to
undertake environmentally friendly activities in careful consideration
of economic, environmental, and social aspects. We promote
activities for environmental preservation, and we specifically develop
our products to embrace the concept of environment-friendly. We
minimize the hazardous materials contained in our products. For
example, there is no cadmium to be found in our product.
Information for recycling
This product may contain parts which could be hazardous to the
environment. It is important that this product be recycled after use.
LGE. handles all waste product through an environmentally
acceptable recycling method. There are several take-back and
recycling systems currently in operation worldwide. Many parts will
be reused and recycled, while harmful substances and heavy metals
are treated by an environmentally friendly method. If you want
to find out more information about our recycling program, please
contact your local LG vendor or a corporate representative of LG.
We set our vision and policies on a cleaner world by selecting the
issue of the global environment as a task for corporate improvement.
Please visit our website for more information about our ‘green’
policies.
http://www.lg.com/global/sustainability/environment/take-backrecycling.jsp
21
ENGLISH
ENG
Service
Only India
Disposal of your old appliance (as per e-waste Rules)
ENG
ENGLISH
1. When this crossed out wheeled bin symbol is depicted on the product and its operator’s manual, it means the product is covered by the e-waste
Management and Handling Rules , 2011 and are meant to be recycled, dismantled, refurbished or disposed off.
2. D o’s :
a. The product is required to be handed over only to the authorized recycler for disposal.
b. Keep the product in isolated area, after it becomes non-functional/unrepairable so as to prevent its accidental breakage.
D on’t :
a. The product should not be opened by the user himself/herself, but only by authorized service personnel.
b. The product is not meant for re-sale to any unauthorized agencies/scrap dealer/kabariwalah.
c. The product is not meant for mixing into household waste stream.
d. Do not keep any replaced spare part(s) from the product in exposed area.
3. Any disposal through unauthorized agencies/person will attract action under Environment (Protection) Act 1986.
4. “This product is complied with the requirement of Hazardous Substances as specified under Rule 13 (1) & (2) of the E-Waste(Management & Handling)
Rules, 2011”.
5. To locate a nearest collection centre or call for pick-up (limited area only) for disposal of this appliance, please contact Toll Free No. 1800-315-9999
/ 1800-180-9999 for details. All collection centre and pick up facilities are done by third parties with LG Electronics India Pvt. Ltd. Merely as a
facilitator. For more detailed information , please visit : http://www.lge.com/in.
22
i;kZoj.kh; tkudkjh
ENGLISH
ENG
अपने पुराने निपटान के उपकरण ( ई-अपशिष्ट नियम के अनुसार )
1. जब इस काटे गए पहिये वाले बिन का चिन्ह किसी उपकरण और इसके ओपेरटर की पुस्तिका के साथ संलग्न
होता है तो इसका मतलब है कि इसे “ई- अपशिष्ट “(प्रबंधन और हथालन ) नियम २०११ के अंतरत
्ग
सम्मिलित किया गया है , और इसे नवीनीकरणकरन ,विघटन और निपटान के लिए बनाया गया है ।
2. करें :
क . उपकरण को सिर्फ अधिकृत पन
ु ः नवीनीकरणकर्ता को ही निपतारण करने हे तु हस्तांतरित करें ।
ख. जब उपकरण कार्यरत न हो इसे अलग क्षेत्र में रखें ताकि उपकरण से होने वाली दर्घ
ु टनाओ से बचा जा
सके ।
न करें :
क. इस उपकरण को स्वयं/खुद नहीं खोलना चाहिए ! उपकरण को केवल अधिकृत अधिकारी के द्वारा ही
खोला जाना चाहिए ।
ख. इस उपकरण को पुनः बिक्री के लिए किसी भी कबाड़ीवाला / भंगार-वाला / अनाधिकृत संस्था को न दें ।
ग. इस उपकरण को किसी घरे लू अपशिष्ट सामान के साथ मिलाकर न रखें ।
घ. उपकरण के बदले हुए या आतंरिक पुरजो को खुले क्षेत्र में न रखें ।
3. यदि किसी अनाधिकृत विभाग या व्यक्ति के द्वारा निपटारन किया जाता है तो यह पर्यावरण (सुरक्षा) धारा
१९८६ के अंतरत
्ग आता है ।
4. यह उत्पाद ई-अपशिष्ट (प्रबंधन और हथालन) नियम 2011 के अन्तर्गत 13(1) एवं (2) के तहत निर्दिष्ट
खतरनाक पदार्थो की आवशय
्‍ कता का पालन करता है
5. उपरोक्त पदार्थो के निपटारन के लिए नजदीकी निपटारन संसथान (संकीर्ण क्षेत्र )में कॉल करें । अधिक
जानकारी के लिए हमारे टोल फ्री नंबर 1800-315-9999 / 1800-180-9999 पर कॉल करें . सभी संग्रहण केंद्र
व पिक-अप की सवु िधाएं किसी थर्ड- पार्टी जो LG Electronics India Pvt. Ltd. को अपनी सेवाएं प्रदान
कर रही हों, से करवाएं ।
ज्यादा जानकारी के लिए दे खें वेब:साईट : http://www.lge.com/in
23
Make sure to read the Safety Precautions
before using the product. Keep the
Owner’s Manual in an accessible place
for future reference. Please note that the
label attached to the product provides
information for technical support.
MODEL
SERIAL
Download PDF

advertising