Owner's Manual IPS LED MONITOR (LED MONITOR*) *LG LED Monitors are LCD Monitors with LED Backlighting. Please read the safety information carefully before using the product. IPS LED Monitor (LED Monitor) Model List 29UM59 www.lg.com 2 Contents ENGLISH ENG CONTENTS 3 LICENSE 16 CUSTOMIZING SETTINGS 16 Activating the Main Menu ASSEMBLING AND PREPARING 17 Customizing settings 17 - Menu Settings 4 Product Components 17 - -Quick Settings 5 Component and Button Description 18 - -Picture 5 - How to Use the Joystick Button 20 - -General 7 Moving and Lifting the Monitor 21 - -Reset 8 Installing the Monitor 22 - -Picture mode 8 - Assembling the stand base 9 - Using the cable holder 10 - Installing onto a table 4 11 - Adjusting the angle 12 - Using the Kensington lock 12 - Installing the wall mount plate 13 - Installing to a wall 14 USING THE MONITOR 14 Connecting to a PC 14 - HDMI connection 15 Connecting to AV Devices 15 - HDMI connection 15 Connecting to External Devices 15 - Connecting Headphones 23 TROUBLESHOOTING 25 SPECIFICATIONS 26 Factory support mode 26 HDMI Timing (Video) 26 Power Indicator 27 PROPER POSTURE 27 Proper Posture for Using the Monitor LICENSE 3 Each model has different licenses. Visit www.lg.com for more information on the license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP Directive: * This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to display. * To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”. ENG ENGLISH LICENSE 4 ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING ENGLISH ENG Product Components Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product. Note that the product and components may look different from those shown here. or CD(Owner's Manual) / Card Power Cord AC-DC Adapter ( Depending on the country ) AC-DC Adapter ( Depending on the country ) HDMI Cable ( This cable is not included in all countries. ) Stand Base Stand Body Cable Holder Screw Cover 2 Screws CAUTION y y y y Always use genuine components to ensure safety and product performance. y The product warranty will not cover damage or injury caused by the use of counterfeit components. y It is recommend that use the supplied components. y If you use generic cables not certified by LG, the screen may not display or there may be image y noises. NOTE Note that the components may look different from those shown here. yy Without prior notice, all information and specifications in this manual are subject to change to imyy prove the performance of the product. To purchase optional accessories, visit an electronics store or online shopping site or contact the yy retail store where you purchased the product. ASSEMBLING AND PREPARING 5 Component and Button Description ENG ENGLISH Joystick Button Power Indicator y yOn: power is on y yOff: power is off How to Use the Joystick Button You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger. Basic Functions ◄/► Power on Press the joystick button once with your finger to turn on the monitor. Power off Press and hold the joystick button once with your finger to turn off the monitor. Volume Control You can control the volume by moving the joystick button left/right. NOTE y y The joystick button is located at the bottom of the monitor. 6 ASSEMBLING AND PREPARING Input Connector ENGLISH ENG ASSEMBLING AND PREPARING Moving and Lifting the Monitor CAUTION As far as possible, avoid touching the moniyy tor screen. This may result in damage to the screen or some of the pixels used to create images. It is advisable to place the monitor in the yy original box or packing material before attempting to move it. Before moving or lifting the monitor, disconyy nect the power cord and all cables. Hold the top and bottom of the monitor frame yy firmly. Do not hold the panel itself. If you use the monitor panel without the yy stand base, its joystick button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction. When holding the monitor, the screen should yy face away from you to prevent it being scratched. When moving the monitor, avoid any strong yy shock or vibrations to the product. When moving the monitor, keep it upright, yy never turn the monitor on its side or tilt it sideways. ENG ENGLISH When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation regardless of its shape or size. 7 8 ASSEMBLING AND PREPARING Installing the Monitor ENGLISH ENG Assembling the stand base 3 1 Attach the Stand Base to Stand Body. 2 Using a coin, turn the screw clockwise to secure the stand base. 1 Place the screen face down. Stand Body Stand Base CAUTION 4 Attach the screw cover. To protect the screen from scratches, cover yy the surface with a soft cloth. Screw Cover 2 Check the direction of the standbody (front, back) and then mount thestand body onto the stand hinge. Tighten two screws into the back of the stand body. NOTE You can disassemble the stand in the yy reverse order of the assembly. Stand Body Stand Hinge ASSEMBLING AND PREPARING CAUTION CAUTION It may hurt your foot off the stand, so be careful. Using the cable holder Arrange the cables using the cable holder as shown in the illustration. Cable Holder ENG ENGLISH y y Illustrations in this document represent typical procedures, so they may look different from the actual product. y y Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty. y y Be careful not to hurt your hand on the edges of the screw covers. y y Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand and could result in personal injury. y y When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen may cause damage to it. 9 10 ASSEMBLING AND PREPARING Installing onto a table ENGLISH ENG 1 Lift the monitor and place it on the table in an upright position. Place at least 100 mm away from the wall to ensure sufficient ventilation. 3 Press the joystick button on the bottom of the monitor to turn on the monitor. CAUTION Unplug the power cord prior to moving or yy installing the monitor. There is risk of electric shock. 100 mm 100 mm 100 mm 100 mm 2 Connect the power adapter to the monitor and then plug the power cord into the wall outlet. or ASSEMBLING AND PREPARING Adjusting the angle 11 WARNING ed on the stand base. To avoid injury to the fingers when adjusting yy the screen, do not hold the lower part of the monitor's frame as illustrated below. 2 Adjust the angle of the screen. The angle of the screen can be adjusted forwards or backwards for a comfortable viewing experience. Be careful not to touch or press the screen yy area when adjusting the angle of the monitor. Rear Side Front Side ENG ENGLISH 1 Place the monitor in an upright position, mount- 12 ASSEMBLING AND PREPARING ENGLISH ENG Using the Kensington lock Installing the wall mount plate The Kensington security system connector is located at the back of the Monitor set. For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www.kensington.com. This monitor supports the specification of the standard wall mount plate or compatible device. Connect the Kensington security system cable between the Monitor set and a table. 2 Place the wall mount plate onto the monitor 1 Place the screen face down. To protect the screen from scratches, cover the surface with a soft cloth. and align it with the screw holes. 3 Tighten the four screws to fix the plate to the monitor using a screwdriver. NOTE The wall mount plate is sold separately. yy For more information on installation, refer to yy the wall mount plate's installation guide. Be careful not to use excessive force when yy mounting the wall mount plate, as this can damage the monitor's screen. NOTE Use of the Kensingtonlock is optional. yy The accessories can be purchased at your local electronics store. ASSEMBLING AND PREPARING 13 Wall Mount (A x B) yy Installing to a wall A 100 mm 100 mm 100 mm 100 mm To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor. Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall. 1 If you use screw longer than standard, the monitor might be damaged internally. 2 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. Model Wall Mount (A x B) Standard screw Number of screws Wall Mount Plate (Optional) 29UM59 75 x 75 M4 x L10 4 RW120 B ENG ENGLISH Install the monitor at least 100 mm away from the wall and leave about 100 mm of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail store. Please refer to the manual to install and set up a tilting wall mounting bracket. CAUTION Unplug the power cord before moving or inyy stalling the monitor to avoid electric shocks. Installing the monitor on the ceiling or on a yy slanted wall may result in the monitor falling off, which could lead to injury. Please use the genuine LG wall mounting bracket. For more information, contact your local retail store or a qualified installer. Applying excessive force when fastening yy screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty. Use the wall mounting bracket and screws yy that conform to the VESA standard. Damage caused by the use or misuse of inappropriate components will not be covered by the product warranty. Screw length from outer surface of back yy cover should be under 8mm. Wall mount Pad Back Cover Wall mount Pad Back Cover Standard screw Max.8mm NOTE Use the screws specified by the VESA stanyy dard. The wall mount kit includes the installation yy guide and all necessary parts. The wall mounting bracket is optional. The yy accessories can be purchased at your local retail store. The length of the screw may differ for each yy wall mounting bracket. Ensure the correct length screw is used. For more information, please refer to the yy user manual for the wall mounting bracket. 14 USING THE MONITOR ENGLISH ENG USING THE MONITOR Connecting to a PC This monitor supports the *Plug and Play yy feature. *Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure anything or install any manual drivers. HDMI connection Transmits the digital video and audio signals from your PC and A/V devices to the monitor. Connect your PC and AV device to the monitor with the HDMI cable as illustrated below. Press the menu button and then select the input option from the input menu. NOTE If you use HDMI PC, it can cause compatibility yy problem. Use a certified cable with the HDMI logo yy attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. Recommended HDMI cable types yy - High-Speed HDMI®/TM Cable - High-Speed HDMI®/TM Cable with Ethernet USING THE MONITOR Connecting to AV Devices Transmits the digital video and audio signals from your PC and A/V devices to the monitor. Connect your PC and AV device to the monitor with the HDMI cable as illustrated below. Press the menu button and then select the input option from the input menu. Connecting to External Devices Connecting Headphones Connect peripherals to the monitor via the headphones port. Connect as illustrated. (sold separately) NOTE NOTE If you use HDMI PC, it can cause compatibility yy problem. Use a certified cable with the HDMI logo yy attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. Recommended HDMI cable types yy - High-Speed HDMI®/TM Cable - High-Speed HDMI®/TM Cable with Ethernet y y Peripheral devices are sold separately. y y If you use angled earphones, it may cause a problem with connecting another external device to the monitor. Therefore, it is recommended to use straight earphones. Angled Straight y y Depending on the audio settings of the PC and external device, headphones and speaker functions may be limited. ENG ENGLISH HDMI connection 15 16 CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS ENGLISH ENG Activating the Main Menu 1 2 3 Press the joystick button on the bottom of the monitor. Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options. Press the joystick button once more to exit the main menu. Power Indicator Joystick Button Button Menu Status Description Main menu disabled Enables the main menu. Main menu enabled Exits the main menu. (Holding down the button to turn off the monitor: You can turn off the monitor this way at any time, including when the OSD is on.) ◄ ► Main menu disabled Adjusts the monitor volume level. Main menu enabled Main menu disabled Adjusts the monitor volume level. Main menu enabled ▲ Operates the Input change. Main menu disabled Enables the main menu. Main menu enabled ▼ Enters the menu features. Enters the picture mode feature. Main menu disabled Enables the main menu. Main menu enabled Turns off the monitor. Main Menu Features Main Menu Description Menu Configures the screen settings. Picture Mode Select picture mode to achieve the best display effect. Input You can choose the input signal. • When two input signals are connected, you can select the input signal you want. Monitor off Turns off the monitor. Exit Exits the main menu. CUSTOMIZING SETTINGS 17 Customizing settings ENG ENGLISH Menu Settings -Quick Settings 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. Go to Quick Settings > Brightness by moving the joystick. 2 3 Configure the options following the instructions that appear in the 4 5 bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit. Each option is described below. Menu > Quick Settings Brightness Contrast Volume Description Adjusts the color contrast and brightness of the screen. Adjusts the volume. NOTE Jog joystick button down ( yy ) in the Volume menu will enable/disable the Mute function. Input Selects the input mode. Ratio Adjusts the screen ratio. Wide Displays the video in wide-screen, regardless of the video signal input. Original Displays a video according to the input video signal aspect ratio. NOTE The display may look the same for Wide, Original options at the recommended resolution (2560 x yy 1080). The ratio is disabled in the interlaced signal. yy 18 CUSTOMIZING SETTINGS -Picture ENGLISH ENG 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. Go to Picture by moving the joystick. 2 3 Configure the options following the instructions that 4 5 Game Adjust appear in the bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit. Color Adjust Each option is described below. Menu > Picture Picture Mode Picture Adjust Description Custom Allows the user to adjust each element. The color mode of the main menu can be adjusted. Reader It is a mode that the screen is adjusted to the best for the newspaper. If you want screen more bright, you can control brightness in Menu OSD. Photo Optimizes the screen to view photos. Cinema Optimizes the screen to improve the visual effects of a video. FPS 1 This mode is optimized for FPS games. FPS 2 It has a higher Black Stabilizer value than FPS Game 1. It is suitable for very dark FPS games. RTS This mode is optimized for RTS Game. Custom (Game) In this mode, users can customize various elements including game-related options. Sharpness Adjusts the sharpness of the screen. Black Level DFC Sets the offset level (for HDMI only). y y Offset: as a reference for a video signal, this is the darkest color the monitor can display. High The picture of the screen gets brighter. Low The picture of the screen gets darker. Adjusts the brightness automatically according to the screen. CUSTOMIZING SETTINGS Game Adjust 19 Black Stabilizer : You can control the black contrast to have better visibility in dark scenes. Increasing the Black Stabilizer value brightens the low gray level area on the screen. (You can easily distinguish objects on dark game screens.) Reducing the Black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen. Response Time Sets a response time for displayed pictures based on the speed of the screen. For a normal environment, it is recommended that you use Normal. For a fast-moving picture, it is recommended that you use High. Setting to High may cause image sticking. FreeSync High Sets the response time to High. Middle Sets the response time to Middle. Low Sets the response time to Low. Off Sets the response time to Off. Provides seamless and natural images by synchronizing the vertical frequency of the input signal with that of the output signal. NOTE y yTo use the FreeSync feature, a graphic card that supports FreeSync is necessary. yySupported Interface: HDMI y yFor more information, refer to AMD website at http://www. amd.com/FreeSync Color Adjust On FreeSync function on. Off FreeSync function off. Gamma The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the lighter the image becomes. If you do not need to adjust the gamma settings, select Off. Color Temp Selects the factory default picture color. Warm: Sets the screen color to a reddish tone. Medium: Sets the screen color between a red and blue tone. Cool: Sets the screen color to a bluish tone. Custom Red Green Blue Six Color You can customize the picture color using Red, Green, and Blue colors. Meets the user requirements for colors through adjusting the color and saturation of the six colors(Red_Hue, Red_Saturation, Green_ Hue, Green_Saturation, Blue_Hue, Blue_Saturation, Cyan_Hue, Cyan_Saturation, Magenta_Hue, Magenta_Saturation, Yellow_ Hue, Yellow_Saturation) and saving the settings. *Hue: Adjusts tone of the screen. *Saturation: Adjusts the saturation of the screen colors. The lower the value, less saturated and bright the colors become. The higher the value, the more saturated and dark the colors become. Reset Returns the color settings to the default settings. ENG ENGLISH Black Stabilizer 20 CUSTOMIZING SETTINGS -General ENGLISH ENG 1 To view the OSD menu, press the joystick but- ton at the bottom of the monitor and then enter the Menu. Go to General by moving the joystick. Game Adjust SMART ENERGY SAVING 2 the instructions that 3 Configure the options followingColor Adjust 4 5 Low Power LED Automatic Standby appear in the bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit. Each option is described below. Menu > General Description Language To choose the language in which the control names are displayed. SMART ENERGY SAVING High Enables SMART ENERGY SAVING you can save energy with this energy- high efficient function. Low Enables SMART ENERGY SAVING you can save energy with this energy- low efficient function. Off Disables SMART ENERGY SAVING . Power LED Turns the power indicator on the front side of the monitor on/off. On The power indicator is automatically turned on. Off The power indicator is automatically turned on. Automatic Standby Feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set a timer for the auto-off function. (Off, 4 H, 6 H, and 8 H) OSD Lock Prevents incorrect key input. On Key input is disabled. NOTE All functions except for the OSD Lock mode and the Exit button for Brightness, Contrast, Volume, Input, and General are disabled. Off Key input is enabled. NOTE Saving Data depends on the Panel. So,those values should be different from each panel and panel yy vendor.If option of SMART ENERGY SAVING is High or Low, monitor luminance become higher or lower depend on source. CUSTOMIZING SETTINGS 21 -Reset ENG ENGLISH 1 To view the OSD menu, press the joystick but- ton at the bottom of the monitor and then enter the Menu. Go to Reset by moving the joystick. 2 3 Configure the options following the instructions that 4 5 appear in the bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit. Each option is described below. Menu > Reset Description Do you want to reset your settings? Reset Returns to the default settings. Cancel Cancel the select. 22 CUSTOMIZING SETTINGS -Picture mode ENGLISH ENG 1 Press the joystick button on the bottom of the monitor. 2 Go to Picture mode by moving the joystick button to ▲. 3 Configure the options following the instructions that appear in the bottom. Each option is described below. Menu > Picture Mode Picture Mode Description Custom Allows the user to adjust each element. The color mode of the main menu can be adjusted. Reader It is a mode that the screen is adjusted to the best for the newspaper. If you want screen more bright, you can control brightness in Menu OSD. Photo Optimizes the screen to view photos. Cinema Optimizes the screen to improve the visual effects of a video. FPS 1 This mode is optimized for FPS games. FPS 2 It has a higher Black Stabilizer value than FPS Game 1. It is suitable for very dark FPS games. RTS This mode is optimized for RTS Game. Custom (Game) In this mode, users can customize various elements including game-related options. TROUBLESHOOTING 23 Nothing is displayed on the screen. Is the monitor's power cord plugged y y Check if the power cord is correctly plugged in to the power outlet. in? Is the power indicator on? y y Check the power cable connection and press the power button. Is the power indicator displaying ? y y Check that the connected input is enabled (Menu - Input). y y If the monitor is in sleep mode, move the mouse or press any key on the keyboard to switch the display on. y y Check if the computer is turned on. Is the "OUT OF RANGE" message y y This occurs when signals transferred from the PC (video card) are out displayed? of the horizontal or vertical frequency range of the monitor. Please see the "Product Specification" section of this manual to set the appropriate frequency. Is the "CHECK SIGNAL CONNEC- y y This is displayed when the signal cable between the PC and the moniTION" message is displayed? tor is missing or disconnected. Check the cable and reconnect. Is the power indicator blinking? The screen retains an image. Does image sticking occur even when the monitor is turned off? y y Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image. y y Use a screen saver to protect the screen when using the monitor for a prolonged period of time. NOTE Vertical Frequency: In order to display an image, the screen must be refreshed dozens of times per yy second like a fluorescent lamp. The number of times the screen is refreshed per second is called vertical frequency or refresh rate and is represented by Hz. Horizontal Frequency: The time it takes to display one horizontal line is called the horizontal cycle. yy The number of horizontal lines displayed in one second can be calculated by dividing one by the horizontal cycle. This is called horizontal frequency and is represented by kHz. ENG ENGLISH TROUBLESHOOTING 24 TROUBLESHOOTING NOTE ENGLISH ENG Check if the video card's resolution or frequency is within the range allowed by the monitor and set to yy the recommended (optimal) resolution in Control Panel > Display > Settings. Failing to set the video card to the recommended (optimal) resolution may result in blurred text, a yy dimmed screen, a truncated display area or misalignment of the display. The configuration procedure may differ depending on your computer and/or operating system. Also, yy some video cards may not support certain resolutions. If this is the case, contact the manufacturer of the computer or video card for assistance. Some video cards may not support the 2560x1080 resolution. yy If the resolution cannot be displayed, contact the manufacturer of your video card. The display color is abnormal. Does the display appear discolored y y Set the color to 24 bit (true color) or higher. In Windows, go to Control (16 color)? Panel > Display > Settings > Color Quality. Does the display color appear unstable or in monochrome? Are there spots on the screen? y y Check if the signal cable is connected properly. Reconnect the cable or reinsert the PC's video card. y y When using the monitor, pixilated spots (red, green, blue, white or black) may appear on the screen. This is normal for the LCD screen. It is not an error nor is it related to the monitor's performance. SPECIFICATIONS 25 LCD Screen Type Resolution Pixel Pitch Maximum Resolution Video Signal Input Connector Power AC/DC adaptor Environmental Conditions Recommended Resolution Horizontal Frequency Vertical Frequency Synchronization HDMI IN1, HDMI IN2 , H/P Voltage TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Screen 0.2628 mm x 0.2628 mm 2560 x 1080 @ 60 Hz 2560 x 1080 @ 60 Hz 30 kHz to 90 kHz 56~75 Hz (PC) Separate Sync. 19 V 1.6 A Power consumption (Typ.) On mode: 23 W Typ. (ENERGY STAR® standard) * 32 W Typ. (Outgoing condition) ** Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W Type ADS-40SG-19-3 19032G, SHENZHEN HONOR ELECTRONIC CO.,LTD production Or type ADS-40FSG-19 19032GPG-1, SHENZHEN HONOR ELECTRONIC CO.,LTD production Or type ADS-40FSG-19 19032GPBR-1, SHENZHEN HONOR ELECTRONIC CO.,LTD production Or type ADS-40FSG-19 19032GPI-1, SHENZHEN HONOR ELECTRONIC CO.,LTD production Or type ADS-40FSG-19 19032GPCU-1, SHENZHEN HONOR ELECTRONIC CO.,LTD production Or type ADS-32FSG-19 19032EPCU-1L, SHENZHEN HONOR ELECTRONIC CO.,LTD production Or type LCAP21A, LIEN CHANG ELECTRONIC ENTERPRISE production Or type LCAP26A-A, LIEN CHANG ELECTRONIC ENTERPRISE production Or type LCAP26A-E, LIEN CHANG ELECTRONIC ENTERPRISE production Or type LCAP26A-I, LIEN CHANG ELECTRONIC ENTERPRISE production Or type LCAP26A-B, LIEN CHANG ELECTRONIC ENTERPRISE production Or type LCAP51A, LIEN CHANG ELECTRONIC ENTERPRISE production Output: 19 V 1.7 A Operating Condition Temperature: 0°C to 40°C; Humidity: ≤ 80% Storing Condition Temperature: -20°C to 60°C; Humidity: ≤ 85% Stand Angle Adjustment Dimension Forwards/Backwards: -5° to 20° (Head) Weight (Without Packaging) 5.4 kg Monitor Size (Width x Height x Depth) With Stand 702.5 mm x 414.0 mm x 204.7 mm Without Stand 702.5 mm x 328.4 mm x 63.8 mm Product specifications shown above may be changed without prior notice due to upgrade of product functions. * The power consumption level can be different by operating condition and monitor setting. * The On mode power consumption is measured with ENERGY STAR® test standard. ** The On mode power consumption is measured with LGE test standard (Full White pattern, Maximum resolution). ENG ENGLISH SPECIFICATIONS 26 SPECIFICATIONS Factory support mode ENGLISH ENG Preset Mode Horizontal Frequency Vertical Frequency Polarity (H/V) (kHz) (Hz) 720 x 400 31.468 70.08 -/+ 640 x 480 31.469 59.94 -/- 640 x 480 37.5 75 -/- 800 x 600 37.879 60.317 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.123 75.029 +/+ 1152 x 864 67.5 75 +/+ 1280 x 720 45 60 +/+ 1280 x 1024 63.981 60.02 +/+ 1280 x 1024 79.976 75.025 +/+ 1600 x 900 60 60 +/+ 1680 x 1050 65.290 59.954 -/+ 1920 x 1080 67.5 60 +/- 2560 x 1080 66.7 60 -/+ HDMI Timing (Video) Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) 480P 31.50 60 576P 31.25 50 720P 37.50 50 720P 45.00 60 1080P 56.25 50 1080P 67.50 60 Power Indicator Mode LED Color On Mode Light On Power-saving Blinking Off Mode Off Remarks Remarks PROPER POSTURE 27 Proper Posture for Using the Monitor Adjust the screen so that you can comfortably view at a slight downward angle from your natural eye level. Take a break for approximately ten minutes every hour to reduce any fatigue caused by long-time yy usage. The stand of the touch monitor allows the product to be used in the optimum position. yy Adjust the stand angle to obtain the best view of the screen. You should be looking slightly down at the screen. Adjust the angle So that there is no reflection or glare from the screen. Place your hands gently on the keyboard, keeping your arms bent at the elbows and extended horizontally in front of you. ENG ENGLISH PROPER POSTURE Make sure to read the Safety Precautions before using the product. Keep the Owner's Manual(CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Refer to ENERGY STAR.gov for more information on the ENERGY STAR program.