LG | 34UM65-P | LG 34UM65-P Owner’s Manual

Owner's Manual
IPS LED MONITOR
(LED MONITOR*)
*Disclaimer: LG LED Monitor applies LCD screen with LED backlights.
Please read the safety information carefully
before using the product.
IPS LED Monitor (LED Monitor) Model List
25UM64
25UM65
34UM64
34UM65
www.lg.com
2
Table of Contents
ENGLISH
TABLE OF CONTENTS
3LICENSE
4ASSEMBLING AND
24 INSTALLING THE LG
MONITOR SOFTWARE
PREPARING
26 USER SETTINGS
4
Product Composition
26
5
Product and Button Description
26
- Main Menu Features
6
- How to Use the Joystick Button
27
User Settings
7
- Input Connector
27
- Menu Settings
8
Moving and Lifting the Monitor
28
- Ratio
9
Installing the Monitor
29
- Function
9
- Assembling the Stand
30
- PBP
12
- Detaching the Stand
31
- Picture
15
- Installing on a Table
32
- Color
16
- Adjusting the angle
33
- Settings
17
- Tidying up Cables
34
- Reset
18
- Installing the Wall Mount Plate
35
- Reader
18
- Installing on the Wall
20
- Using the Kensington Lock
21 USING THE MONITOR
21
Connecting to a PC
21
- DVI Connection
22
- HDMI Connection
22
- DisplayPort Connection
23
Connecting AV Devices
23
- HDMI Connection
23
Connecting Peripherals
23
- Connecting Headphones
Activating the Main Menu
36 TROUBLESHOOTING
38 PRODUCT SPECIFICATION
40
Factory Support Mode
(Preset Mode, DVI-D/HDMI/DisplayPort
PC)
40
HDMI Timing (Video)
40
Power LED
41 PROPER POSTURE
41
Proper Posture for Using the Monitor
License
3
LICENSE
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
VESA, VESA logo, DisplayPort compliance logo and DisplayPort
compliance logo for dual-mode source devices are all registered trademarks of
the Video Electronics Standards Association.
ENGLISH
Each model has different licenses. Visit www.lg.com for more information on the license.
4
ASSEMBLING AND PREPARING
ENGLISH
ASSEMBLING AND PREPARING
Product Composition
Please check whether all the components are included in the box before using the product. If there are
any missing components, contact the retailer where you purchased the product. Note that the product and
related components may look different from those shown here.
or
CD (Owner's Manual /
Software) / Guides /
Cards
Power cord
AC/DC Adapter
(Depending upon country)
AC/DC Adapter
(Depending upon
country)
HDMI cable
25UM65
25UM64
Stand Base
Stand Body
Screw Cover
Two Screws
(M4 x 10)
Screw Cover
Two Screws
(M4 x 10)
Clear sheet
34UM65
34UM64
Stand Base
CAUTION
y y Always use genuine LG components to ensure safety and product performance.
y y The product warranty will not cover damage or injury caused by the use of unauthorized components.
ASSEMBLING AND PREPARING
5
NOTE
Product and Button Description
25UM65
25UM64
Power Indicator
y y On Power on
y y Off Power off
Joystick
Button
NOTE
y y The joystick button is located at the bottom of the monitor.
ENGLISH
y y The components may look different from those illustrated here.
y y Without prior notice, all product information and specifications contained in this manual are subject to
change to improve the performance of the product.
y y To purchase optional accessories, visit an electronics store or an online shopping site, or contact the
retailer from which you purchased the product.
y y The power cord provided may differ depending upon the region.
6
ASSEMBLING AND PREPARING
34UM64
ENGLISH
34UM65
Power Indicator
y y On Power on
y y Off Power off
Joystick
Button
NOTE
y y The joystick button is located at the bottom of the monitor.
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with
your finger.
Basic Functions
◄/►
Power on
Press the joystick button once with your finger to turn on the
monitor.
Power off
Press and hold the joystick button once with your finger to turn off
the monitor.
Volume
Control
You can control the volume by moving the joystick button left/right.
ASSEMBLING AND PREPARING
7
Input Connector
25UM64
ENGLISH
25UM65
DVI-D IN
DP IN
HDMI IN 2
AUDIO IN(PC)
DC-IN
(19 V
)
HDMI IN 1
H/P
HDMI IN 2
34UM64
AUDIO IN
(PC)
HDMI IN 2
34UM65
DVI-D IN
DC-IN
(19 V
)
DP IN
HDMI IN 1
H/P
ENGLISH
8
ASSEMBLING AND PREPARING
Moving and Lifting the
Monitor
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe transportation, regardless of its shape or size.
y y Place the monitor in the original box or packing material before attempting to move it.
y y Before moving or lifting the monitor, disconnect the power cord and all other cables.
y y Hold the bottom and side of the monitor frame
firmly. Do not hold the panel itself.
y y When holding the monitor, the screen should
face toward you to prevent it from being
scratched.
y y When transporting the monitor, do not expose
the monitor to shock or excessive vibration.
y y When moving the monitor, keep it upright and
never turn the monitor on its side or tilt it sideways.
CAUTION
y y Avoid touching the monitor screen as much as
possible.
- - This may result in damage to the screen or
some of the pixels used to create images.
y y If you use the monitor panel without the stand
base, its joystick button may cause the monitor to become unstable and fall, resulting in
damage to the monitor or human injury. In
addition, this may cause the joystick button to
malfunction.
ASSEMBLING AND PREPARING
Installing the Monitor
3 Tighten two screws into the back of the stand
body and close the screw cover.
ENGLISH
Assembling the Stand
CAUTION
y y Applying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be covered by the product warranty.
y y If you use the monitor panel without the
stand base, its joystick button may cause the
monitor to become unstable and fall, resulting in damage to the monitor or human injury.
In addition, this may cause the joystick button
to malfunction.
25UM65
25UM64
1 Place the screen face down.
CAUTION
Screw Cover
y y To protect the screen from scratches, cover
the surface with a soft cloth.
2 Check the direction of the stand body (front,
back) and then mount the stand body onto the
stand hinge.
Stand Hinge
Stand Body
9
10
ASSEMBLING AND PREPARING
4 Fix the stand base to the stand body. Turn the
ENGLISH
screws on the stand base to the right.
Stand Body
Stand Base
ASSEMBLING AND PREPARING
34UM65
34UM64
11
or
ENGLISH
1 Place the screen face down.
100 mm
Stand Hinge
Screw Cover
CAUTION
y y To protect the screen from scratches, cover
the surface with a soft cloth.
2 Mount the stand base onto the stand hinge as
shown in the illustration. Fix two screws into
the back of the stand base and close the screw
cover.
Stand Base
120 mm
CAUTION
y y The stand height is adjustable by 20 mm.
y y When tightening the screws after mounting
the stand base onto the stand hinge, be sure
to hold the stand base with your hand. Otherwise, the product may fall, causing personal
injury or damage to the product.
y y Be careful not to hurt your hand on the edges
of the screw covers.
12
ASSEMBLING AND PREPARING
ENGLISH
Detaching the Stand
2 Turn the screws on the stand base to the left to
detach the stand base from the stand body.
CAUTION
Stand Body
y y Illustrations in this document represent typical
procedures, so they may look different from
the actual product.
y y Do not carry the monitor upside down by just
holding the base. This may cause the monitor
to fall off the stand and could result in personal
injury.
y y When lifting or moving the monitor, do not
touch the monitor screen. The force applied to
the monitor screen may cause damage to it.
y y If you use the monitor panel without the stand
base, its joystick button may cause the monitor to become unstable and fall, resulting in
damage to the monitor or human injury. In
addition, this may cause the joystick button to
malfunction.
25UM65
25UM64
1 Place the screen face down.
CAUTION
y y To protect the screen from scratches, cover
the surface with a soft cloth.
Stand Base
ASSEMBLING AND PREPARING
13
3 Lift up the screw cover to detach the screw
Stand Body
Stand Hinge
Screw Cover
ENGLISH
cover from the stand body. Remove the screws
from the back of the stand body using a screwdriver and detach the stand body from the
stand hinge as shown in the illustration.
14
ASSEMBLING AND PREPARING
ENGLISH
34UM65
34UM64
1 Place the screen face down.
Stand Base
CAUTION
y y To protect the screen from scratches, cover
the surface with a soft cloth.
2 Detach the screw cover from the stand base
as shown in the illustration and then remove
the two screws on the back to detach the stand
base from the hinge.
CAUTION
y y When removing the screws to detach the
stand base from the hinge, be sure to hold
the stand base with your hand. Otherwise, the
product may fall, causing personal injury or
damage to the product.
Screw Cover
ASSEMBLING AND PREPARING
2 Connect the power adapter to the monitor and
Installing on a Table
then plug the power cord into the wall outlet.
Lift the monitor and place it on the table in an
upright position. Place the monitor at least
10 cm away from the wall to ensure sufficient
ventilation.
25UM65
25UM65
25UM64
25UM64
10 cm
10 cm
10 cm
or
10 cm
34UM65
34UM64
34UM64
34UM65
10 cm
10 cm
10 cm
10 cm
3 Press the joystick button on the bottom of the
monitor to turn on the monitor.
CAUTION
y y Unplug the power cord before moving or
installing the monitor. There is risk of electric
shock.
ENGLISH
1
15
16
ASSEMBLING AND PREPARING
ENGLISH
Adjusting the angle
WARNING
1 Place the monitor mounted on the stand base
2
in an upright position.
Adjust the angle of the screen.
The angle of the screen can be adjusted forward
or backward from -5° to 20° for a comfortable
viewing experience.
y y When you adjust the angle, do not hold the
stand as shown on the following illustration.
You may injure your fingers.
25UM65
25UM64
20
-5
25UM64
25UM65
20
-5
20
34UM65
-5
34UM64
20
Front
Rear
20
The angle of the screen can be adjusted forward
or backward from -5° to 15° for a comfortable
viewing experience.
34UM65
34UM64
15
Rear
-5
y y Be careful not to touch or press the screen
area when adjusting the angle of the monitor.
25UM65
25UM64
34UM65
34UM64
-5
Front
-5
ASSEMBLING AND PREPARING
Tidying up Cables
25UM65
25UM64
NOTE
y y Cables can get caught in the hinge area as
shown in the illustration, so be careful when
organizing cables.
34UM65
34UM65
34UM64
34UM64
ENGLISH
Tidy up cables using the cable holder on the stand
base as shown in the illustration.
17
ENGLISH
18
ASSEMBLING AND PREPARING
Installing the Wall Mount Plate
Installing on the Wall
This monitor meets the specifications for the wall
mount plate or other compatible devices.
1 Place the screen face down. To protect the
screen from scratches, cover the surface with a
soft cloth.
2 Attach the clear sheet to the back of the monitor and align it with the screw holes.
(Only 34UM65, 34UM64)
Install the monitor at least 10 cm away from the
wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from
your local retail store. Alternatively, please refer
to the manual for how to install and set up a tilting
wall mounting bracket.
Clear sheet
(PET sheet)
10 cm
10 cm
3 Place the wall mount plate onto the monitor
4
and align it with the screw holes.
Tighten the four screws to fix the plate to the
monitor using a screwdriver.
Wall mount plate
10 cm
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
1 If you use screws longer than the standard
2
NOTE
y y The wall mount plate is sold separately.
y y For more information on installation, refer to
the wall mount plate's installation guide.
y y Be careful not to apply too much force while
mounting the wall mount plate as it may cause
damage to the screen
10 cm
length, it may damage the inside of the product.
A non-VESA standard screw may damage the
product and cause the monitor to fall. LG Electronics is not liable for any accidents relating to
the use of non-standard screws.
ASSEMBLING AND PREPARING
Model
Wall Mount (A x B)
Stand Screw
Required Screws
Wall Mount Plate
(Optional)
y y Wall Mount (A x B)
A
B
NOTE
y y Use the screws specified by VESA standards.
y y The wall mount kit includes the installation
guide and all necessary parts.
y y The wall mounting bracket is optional. You can
obtain optional accessories from your local
dealer.
y y The length of the screw may differ for each
wall mounting bracket. Be sure to use the
proper length.
y y For more information, please refer to the user
manual for the wall mounting bracket.
CAUTION
y y Unplug the power cord before moving or installing the monitor to avoid electric shock.
y y Installing the monitor on the ceiling or on a
slanted wall may result in the monitor falling
off, which could lead to injury. Use an authorized LG wall mount and contact the local
dealer or qualified personnel.
y y Applying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be covered by the product warranty.
y y Use the wall mounting bracket and screws
that conform to VESA standards. Damage
caused by the use or misuse of inappropriate
components will not be covered by the product
warranty.
y y To prevent injury, this apparatus must be
securely attached to the wall in accordance
with the instrallation instructions. (This only
pertains to Australia and New Zealand.)
y y When measured from the back of the monitor,
the length of each installed screw must be 8
mm or less.
Wall Mount Plate
Back of the Monitor
Wall Mount Plate
Back of the Monitor
Screw
Dimensions
: M4 x L10
Max 8 mm
ENGLISH
25UM65
34UM65
25UM64
34UM64
75 x 75
100 x 100
M4 x 10 mm
4
RW120
19
20
ASSEMBLING AND PREPARING
ENGLISH
Using the Kensington Lock
The connector for the Kensington security system
is located at the back of the monitor.
For more information on installation and usage,
refer to the Kensington lock owner's manual or visit
the website at http://www.kensington.com.
Connect the monitor to a table using the Kensington security system cable.
25UM65
25UM64
34UM65
34UM64
NOTE
y y The Kensington security system is optional.
You can obtain optional accessories from most
electronics stores.
21
Using the Monitor
USING THE MONITOR
Press the joystick button, go to Menu → Easy control → Input, and then select the input option.
CAUTION
y y Do not press the screen for a prolonged time.
This may cause image distortion.
y y Do not display a still image on the screen
for a prolonged time. This may cause image
retention. Use a screensaver if possible.
NOTE
y y This monitor supports the *Plug and Play
feature.
* Plug and Play: A feature that allows you to add a
device to your computer without having to reconfigure anything or install any manual drivers.
ENGLISH
y y The following instructions are based on the
25UM65 model. Illustrations in this manual
may differ from the actual product.
Connecting to a PC
DVI Connection
Transmits digital video signals to the monitor. Connect the monitor using the DVI cable as illustrated
below.
To hear sound in DVI input mode, connect the
PC's AUDIO OUT port to the monitor's AUDIO IN
(PC) port using the audio cable.
DVI-D IN
DP IN
HDMI IN 2
AUDIO IN(PC)
DC-IN
(19 V
)
HDMI IN 1
y y When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a
grounded power outlet.
y y The monitor may flicker when turned on in
an area where the temperature is low. This is
normal.
y y Sometimes red, green, or blue spots may appear on the screen. This is normal.
H/P
(sold separately)
AUDIO OUT
DVI-I(D) OUT
PC
PC
CAUTION
and
y y Connect the input signal cable
HDMI IN 2
DVI-D IN
DP IN
turn it in the direction
of the arrow
as shown in the illustration.HDMI
To IN 1
prevent disconnection, secure the
cable tightly.
AUDIO IN(PC)
DC-IN
(19 V
)
H/P
NOTE
yy If you connect a DVI signal cable, use the
DVI-D dual cable.
y y Using a DVI to HDMI cable may cause compatibility issues.
DP OUT
HDMI IN 2
AUDIO IN(PC)
ENGLISH
22
DVI-D IN
DVI-D IN
Using the Monitor
HDMI Connection
DisplayPort Connection
Transmits digital video and audio signals from your
PC to the monitor. Connect your PC to the monitor
using the HDMI cable as shown in the illustration
below.
AUDIOfrom
OUT your
DVI-I(D) OUT
Transmits
digital video and audio signals
PC
PC toPC
the monitor. Connect the monitor to your PC
using the display port cable as shown in the illustration below:
DP IN
HDMI IN 2
AUDIO IN(PC)
DC-IN
(19 V
)
DVI-D IN
HDMI IN 2
DP IN
AUDIO IN(PC)
DC-IN
(19 V
HDMI IN 1
HDMI IN 1
H/P
H/P
(sold separately)
DP OUT
CAUTION
y y Connecting your PC to the monitor using the
HDMI cable may cause device compatibility
issues.
y y Using a DVI to HDMI cable may cause compatibility issues.
DP IN
HDMI IN 2
AUDIO IN(PC)
DC-IN
(19 V
)
HDMI IN 1
H/P
NOTE
AUDIO IN(PC)
y There
or audio
IN 2 output dey DVI-D
IN may be no videoHDMI
DP IN
pending on the DP (DisplayPort) version of the
HDMI IN 1
PC.
H/P
DC-IN
(19 V
)
H/P
Using the Monitor
Connecting Peripherals
HDMI Connection
Connecting Headphones
DP OUT
HDMI transmits digital video and audio signals
from your AV device to the monitor. Connect your
AV device to the monitor using the HDMI cable as
AUDIO IN(PC)
DVI-D IN
DC-IN
shown in
the illustration below.
(19 V
D IN
H/P
DP IN
)
HDMI IN 2
AUDIO IN(PC)
DC-IN
(19 V
)
ENGLISH
Connecting AV Devices
23
Connect peripherals to the monitor via the headphones port. Connect as illustrated.
DP IN
HDMI IN 2
AUDIO IN(PC)
DC-IN
(19 V
)
HDMI IN 1
DVI-D IN
H/P
HDMI IN 1
DP IN
HDMI IN 2
AUDIO IN(PC)
DC-I
(19 V
HDMI IN 1
H/P
H/P
(sold separately)
NOTE
NOTE
y y Peripheral devices are sold separately.
y y If you use Angled earphones, it may cause
a problem with connecting another external
device to the monitor. Therefore, it is recommended to use Straight earphones.
y y Using a DVI to HDMI cable may cause compatibility issues.
Angled
Straight
y y Depending on the audio settings of the PC
and external device, headphones and speaker
functions may be limited.
24
Installing the LG Monitor Software
ENGLISH
INSTALLING THE LG MONITOR SOFTWARE
Insert the Software CD included in the product packaging into your PC's CD drive and install the LG Monitor
Software.
1 Set up Internet Explorer as the default web
browser.
2 Click LG Monitor Software on the CD's main
screen. When the file download window appears, click Run. (Although the screen below
may differ depending on your operating system
or Internet Explorer version, the installation
methods are the same.)
3 Follow the instructions to proceed with the
installation.
4 Check the "I accept the terms of the agreement" checkbox on the License Agreement
screen and then click the Next button.
5 Select the program that you want to install.
CAUTION
y y Windows 7 must be updated to Service Pack
1 or higher.
Installing the LG Monitor Software
NOTE
25
8 When the installation is complete, restart the
system.
6 The LG Monitor Software starts the installation
as shown below:
ENGLISH
y y Screen Split: This program automatically splits
the program window as desired.
y y Auto Resolution: This is a program that automatically changes the resolution to the optimal
settings when connecting the monitor to the
PC in PBP mode.
※ ※This program is not supported in Clone
Mode.
※ ※Extended Mode is not supported when
using a single display.
NOTE
y y When you run Screen Split, the Screen Split
] appears in the system tray at the
icon [
bottom right of the PC screen.
y y Right-click the Screen Split icon and select the
desired layout.
7 The program you selected on the FUNCTION
page will install automatically.
26
User Settings
ENGLISH
USER SETTINGS
Activating the Main Menu
1
2
3
Press the joystick button on the bottom of the monitor.
Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options.
Press the joystick button once more to exit the main menu.
Joystick
Button
Button
Menu Status
Description
Main menu disabled
Enables the main menu.
Main menu enabled
Exits the main menu.
(Holding down the button to turn off the monitor: You can turn off
the monitor this way at any time, including when the OSD is on.)
◄
Main menu disabled Adjusts the monitor volume level.
Main menu enabled
►
Main menu disabled Adjusts the monitor volume level.
Main menu enabled
▲
Enters the PBP feature.
Main menu disabled Enables the main menu.
Main menu enabled
▼
Enters the menu features.
Enters the reader feature.
Main menu disabled Enables the main menu.
Main menu enabled
Turns off the monitor.
Main Menu Features
Main Menu
Reader
Menu
Exit
PBP
Monitor off
Long press: Monitor off
Description
Menu
Configures the screen settings.
Reader
Adjusts color for comfortable text file reading.
PBP
Displays the screens of two input modes on one monitor.
Monitor off
Turns off the monitor.
Exit
Exits the main menu.
User Settings
27
User Settings
1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the
Menu.
Configure the options by moving the joystick up/down/left/right.
2
3 To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it.
4 If you want to exit the OSD menu, move the joystick to ◄ until you exit.
y y When you enter the menu, instructions on how to use the button will appear in the bottom right corner
of the screen.
Easy control
Function
PBP
Screen
Settings
Reset
Each option is described below.
Menu
Easy control
Brightness
Contrast
Volume
Description
Adjusts the color contrast and brightness of the screen.
Adjusts the volume level.
NOTE
y y You can adjust Mute/ Unmute by moving the joystick button to ▼ in the Volume
menu.
Input
Selects the input mode.
Ratio
Adjusts the aspect ratio of the screen.
Function
Adjusts Super Energy Saving and Picture Modes.
PBP
PBP
Displays the screens of two input modes on one monitor.
Screen
Picture
Adjusts the Sharpness, Black level and Response Time of the screen.
Color
Adjusts Gamma, Color Temperature, Red, Green, Blue and Six Color.
Settings
Adjusts Main Audio, Language, Power LED and OSD Lock.
Reset
◄
Restores the default settings.
Exit
Exits the OSD menu.
ENGLISH
Menu Settings
28
User Settings
ENGLISH
Ratio
1
Easy control
To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
Go to Easy control > Ratio by moving the joystick.
2
3 Configure the options following the instructions that appear in
4
5
100
>
Contrast
70
>
Volume
30
>
Brightness
Easy control
Function
the bottom right corner.
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄ until
you exit.
Input
DVI-D
Ratio
Wide
PBP
Screen
Settings
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Easy control > Ratio
Description
Wide
Displays the video in widescreen, regardless of the video signal input.
Original
Displays video according to the aspect ratio of the video signal input.
Cinema 1
Enlarges the screen with an aspect ratio of 21:9. (at 1080p)
Cinema 2
Enlarges the screen with an aspect ratio of 21:9, including the black box at the
bottom for subtitles. (at 1080p)
1:1
The aspect ratio is not adjusted from the original.
NOTE
y y The display may look the same for Wide, Original, and 1:1 options at the recommended resolution
(2560 x 1080).
y y The ratio is disabled in the interlaced signal.
>
29
User Settings
Function
To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
Go to Function by moving the joystick.
Easy control
Low
>
2
3 Configure the options following the instructions that appear in
the bottom right corner.
Picture Mode
Custom
>
Function
PBP
4 To return to the upper menu or set other menu items, move
5
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄ until
you exit.
Screen
Settings
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Function
Super Energy
Saving
Picture Mode
Description
High
Saves energy using the high-efficiency Super Energy Saving feature.
Low
Saves energy using the low-efficiency Super Energy Saving feature.
Off
Disables the Super Energy Saving feature.
Custom
Allows the user to adjust settings. You can adjust the color mode of the main
menu.
Photo
Optimizes the screen for photos.
Cinema
Optimizes the screen for videos.
Game
Optimizes the screen for games.
ENGLISH
1
Function
Super Energy Saving
30
User Settings
ENGLISH
PBP
1
PBP
PBP
To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
Go to PBP by moving the joystick.
2
3 Configure the options following the instructions that appear in
4
5
Easy control
Off
>
>
Input
Audio
HDMI
Function
>
Swap
Sub Full
the bottom right corner.
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄ until
you exit.
PBP
>
Ratio
Screen
Settings
PBP Preview
Reset
DVI-D
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > PBP
PBP
Description
Displays the screens of two input modes on one monitor.
Sub screen (Right)
PBP Connection
DVI
HDMI 1
HDMI 2
DVI
O
X
HDMI 1
O
O
Main screen
(Left)
HDMI 2
X
O
DisplayPort
O
O
O
Main
Selects the video signal input of the main screen.
Input
Sub
Selects the video signal input of the sub screen.
Audio
Changes the audio output in PBP mode.
Swap
Toggles between the main screen and sub screen in PBP mode.
Sub Full
Converts the sub screen in PBP mode to wide screen.
Ratio
Adjusts the aspect ratio of the main screen or sub screen.
Main
Sub
DisplayPort
O
O
O
-
Wide
Displays the video to fit the PBP screen, regardless of the video
signal input.
Original
Displays the video in the aspect ratio of the video signal input
on the PBP screen.
Wide
Displays the video to fit the PBP screen, regardless of the video
signal input.
Original
Displays the video in the aspect ratio of the video signal input
on the PBP screen.
NOTE
y y When the PBP mode is Off, Input, Audio, Swap, Sub Full, and Ratio menus become disabled. The
Main/Sub options for Ratio become disabled if there is no signal.
y y When the monitor is turned off, the PBP mode will be disabled.
y y When Input is switched, the PBP mode will be disabled.
User Settings
Picture
Screen
To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
Go to Screen > Picture by moving the joystick.
Easy control
2
3 Configure the options following the instructions that appear in
Picture
>
Color
>
Function
the bottom right corner.
PBP
4 To return to the upper menu or set other menu items, move
5
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄ until
you exit.
Screen
Settings
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Screen > Picture
Description
Sharpness
Adjusts the sharpness of the screen.
Black Level
Sets the offset level (for HDMI only).
• Offset: as a reference for a video signal, this is the darkest color the monitor can display.
Response Time
High
The picture of the screen gets brighter.
Low
The picture of the screen gets darker.
Sets a response time for displayed pictures based on the speed of the screen. For a normal environment, it is recommended that you use Moddle. For a fast-moving picture, it is
recommended that you use High.
Setting to High may cause image sticking.
High
Sets the response time to High.
Middle
Sets the response time to Middle.
Low
Sets the response time to Low.
Off
Does not use the response time improvement feature.
ENGLISH
1
31
32
User Settings
ENGLISH
Color
Screen
1 To view the OSD menu, press the joystick button at the
Easy control
bottom of the monitor and then enter the Menu.
Go to Screen > Color by moving the joystick.
2
3 Configure the options following the instructions that appear in
Picture
>
Color
>
Function
the bottom right corner.
PBP
4 To return to the upper menu or set other menu items, move
5
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄ until
you exit.
Screen
Settings
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Screen > Color
Description
Gamma
Custom gamma settings: When using the gamma 0, gamma 1 and gamma 2 monitor settings, higher gamma settings mean a brighter image is displayed and vice versa.
Color Temp.
Custom
Selects the factory default picture color.
Warm
Sets the screen color to a reddish tone.
Medium
Sets the screen color to between a red and blue tone.
Cool
Sets the screen color to a bluish tone.
Red
You can customize the picture color using Red, Green and Blue colors.
Green
Blue
Six Colors
Meets the user requirements for colors by adjusting the tone and saturation of the six colors
(red, green, blue, cyan, magenta and yellow) and then saving the settings.
Hue
Adjusts the tone of the screen colors.
Saturation Adjusts the saturation of the screen colors. The lower the value, the less saturated and brighter the colors become. The higher the value, the more saturated
and darker the colors become.
Reset
Returns color to the default settings.
33
User Settings
Settings
To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
Go to Settings by moving the joystick.
2
3 Configure the options following the instructions that appear in
Easy control
>
English
>
Power LED
Off
>
OSD Lock
Off
>
Language
Function
the bottom right corner.
PBP
4 To return to the upper menu or set other menu items, move
5
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄ until
you exit.
Screen
Settings
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Settings
Description
Main Audio
Outputs audio from digital input ports (HDMI, DisplayPort and Audio-in) to the monitor speakers.
Language
Sets the menu screen to the desired language.
Power LED
Turns the power LED on the front of the monitor on or off.
OSD Lock
On
The power LED turns on automatically.
Off
The power LED turns off.
Prevents incorrect key input.
On
Disables key input
Off
Enables key input
NOTE
y y All features are disabled except Brightness, Contrast, Volume, Input, OSD Lock in Settings,
and the Exit button.
ENGLISH
1
Settings
Main Audio
34
User Settings
ENGLISH
Reset
1
Reset
Do you want to reset your settings?
To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
Go to Reset by moving the joystick.
Easy control
2
3 Configure the options following the instructions that appear in
the bottom right corner.
Reset
Cancel
Function
PBP
4 To return to the upper menu or set other menu items, move
5
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄ until
you exit.
Screen
Settings
Reset
▲/▼: Move
Each option is described below.
Menu > Reset
Description
Do you want to reset your settings?
Reset
Restores the default settings.
Cancel
Cancel the reset.
/ ►: OK
◄: Back
User Settings
Reader
Reader Mode
Press the joystick button on the bottom of the monitor.
Go to Reader by moving the joystick button to ▲.
Configure the options following the instructions that appear in the bottom
Reader 1
Reader 2
◄ / ►: Change Mode Reader Off
: OK
right corner.
Each option is described below.
Reader Mode
Description
Reader 1
Optimizes the screen for browsing newspapers. You can brighten the screen in the OSD menu.
Reader 2
Optimizes the screen for looking at cartoons. You can brighten the screen in the OSD menu.
Reader Off
Reader Mode is off.
ENGLISH
1
2
3
35
ENGLISH
36
Troubleshooting
TROUBLESHOOTING
Nothing is displayed on the screen.
Is the monitor's power cord
y y Check if the power cord is correctly plugged into the power outlet.
plugged in?
Is the power indicator on?
y y Check the power cable connection and press the power button.
Is the power on and the power
indicator displaying white?
Is the power indicator blinking?
Is the OUT OF RANGE message being displayed?
Is the No Signal message being displayed?
y y Check that the connected input is enabled (Menu - Input).
y y If the monitor is in power-saving mode, move the mouse, or press
any key on the keyboard, to switch the display on.
y y Check if the computer is turned on.
y y This occurs when signals transferred from the PC (video card) are
out of the horizontal or vertical frequency range of the monitor.
Please see the Product Specification section of this manual to set
the appropriate frequency.
y y This is displayed when the signal cable between the PC and the
monitor is missing or disconnected. Check the cable and reconnect
it.
The OSD Locked message is being displayed.
Are some functions not availy y The OSD is locked. Go to Menu > Settings and set OSD Lock to Off.
able when you press the Menu
button?
The screen retains an image.
Does image sticking occur even
when the monitor is turned off?
y y Displaying a still image for a prolonged time may cause damage to
the screen, resulting in the retention of the image.
y y To extend the lifetime of the monitor, use a screensaver.
Screen display is unstable and shaky / Images displayed on the monitor leave shadow trails.
Did you select the appropriate
y y If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the
resolution?
screen may be flickering. Change the resolution to 1080P or the
recommended resolution.
NOTE
y y Vertical Frequency In order to display an image, the screen must be refreshed dozens of times per
second, like a fluorescent lamp. The number of times the screen is refreshed per second is called
vertical frequency, or refresh rate, and is represented by Hz.
y y Horizontal Frequency The time it takes to display one horizontal line is called the horizontal cycle. If
1 is divided by the horizontal interval, the result is the number of horizontal lines displayed per second.
This is called horizontal frequency and is represented by Hz.
Troubleshooting
37
NOTE
The display color is abnormal.
Does the display appear discol- y y Set the color to 24 bit (true color) or higher. In Windows, go to Conored (16 colors)?
trol Panel > Display > Settings > Color Quality.
Does the display color appear
y y Check if the signal cable is connected properly. Reconnect the cable
unstable or monochrome?
or reinsert the PC's video card.
Are there spots on the screen?
y y When using the monitor, pixilated spots (red, green, blue, white or
black) may appear on the screen. This is normal for an LCD screen.
It is not an error, nor is it related to the monitor's performance.
ENGLISH
y y Check if the video card's resolution or frequency is within the range allowed by the monitor and set it to
the recommended (optimal) resolution in Control Panel > Display > Settings.
y y Not setting the video card to the recommended (optimal) resolution may result in blurred text, a dimmed
screen, a truncated display area or misalignment of the display.
y y The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the performance of the video card. If this is the case, contact
the manufacturer of the computer or video card for assistance.
y y Some video cards may not support 2560 x 1080 resolution. If the resolution cannot be displayed, contact the manufacturer of your video card.
ENGLISH
38
Product Specification
PRODUCT SPECIFICATION
25UM65
25UM64
LCD Screen
Type
Resolution
Pixel Pitch
Max Resolution
64 cm TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Screen
Diagonal length of the screen: 64 cm
0.2286 mm x 0.2286 mm
2560 x 1080 @ 60 Hz
Recommended Resolution 2560 x 1080 @ 60 Hz
Video Signal
Input Connector
Power Sources
AC/DC Adapter
Stand Angle
Environmental
Conditions
Horizontal Frequency
30 kHz to 90 kHz
Vertical Frequency
56 Hz to 75 Hz
Synchronization
Separate Sync.
DVI-D IN, DP (DisplayPort) IN, HDMI IN 1, HDMI IN 2, AUDIO IN(PC), H/P OUT
Power Rating
19 V
1.6 A
Power Consumption
Operating Mode: 31 W (Typical)
(Typical)
36 W (Max, Audio Output 50%)
Power Saving Mode ≤ 0.5 W
Off Mode ≤ 0.5 W
LCAP21A type, manufactured by Lien Chang
ADS-40SG-19-3 19032G type, manufactured by Honor
ADS-40FSG-19 19032GPG-1 type, manufactured by Honor
DA-32B19 type, manufactured by APD (Only for India)
Output: 19 V
1.7 A
Forward/Backward: -5° to 20° (Head)
Operating Conditions
Storing Conditions
Temperature: 10°C to 35°C
Humidity: 10% to 80%
Temperature: -20°C to 60°C
Humidity: 5% to 90%
Audio Output
3W+3W
Dimensions
Monitor Size (Width x Height x Depth)
Weight (Without
Packaging)
With Stand
609.0 mm x 383.0 mm x 188.4 mm
Without Stand
609.0 mm x 281.4 mm x 55.9 mm
With Stand
4.1 kg
Without Stand
3.78 kg
Specifications are subject to change without notice.
Product Specification
34UM65
Resolution
34UM64
Type
87 cm TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Screen
Diagonal length of the screen: 87 cm
Pixel Pitch
0.312 mm x 0.310 mm
Max Resolution
2560 x 1080 @ 60 Hz
Recommended Resolution 2560 x 1080 @ 60 Hz
Video Signal
Horizontal Frequency
30 kHz to 90 kHz
Vertical Frequency
56 Hz to 75 Hz
Synchronization
Separate Sync.
Input Connector
DVI-D IN, DP (DisplayPort) IN, HDMI IN 1, HDMI IN 2, AUDIO IN(PC), H/P OUT
Power Sources
Power Rating
Power Consumption
(Typical)
AC/DC adapter
LCAP39 type, manufactured by Lien Chang
DA-65G19 type, manufactured by APD
Output: 19 V
3.42 A
Forward/Backward: -5° to 15° (Monitor)
Stand Angle
Environmental
Conditions
19 V
2.7 A
Operating Mode: 48 W (Typical)
57 W (Max, Audio Output 50%)
Power Saving Mode ≤ 0.5 W
Off Mode ≤ 0.5 W
Operating Conditions
Temperature: 10°C to 35°C
Humidity: 10% to 80%
Storing Conditions
Temperature: -20°C to 60°C
Humidity: 5% to 90%
Audio Output
7W+7W
Dimensions
Monitor Size (Width x Height x Depth)
Weight (Without
Packaging)
With Stand
829.9 mm x 468.9 mm x 172.9 mm
Without Stand
829.9 mm x 379.8 mm x 82.9 mm
With Stand
7.3 kg
Without Stand
6.3 kg
Specifications are subject to change without notice.
ENGLISH
LCD Screen
39
ENGLISH
40
Product Specification
Factory Support Mode
(Preset Mode, DVI-D/HDMI/DisplayPort PC)
Preset Mode
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Polarity (H/V)
720 x 400
31.468
70.08
-/+
640 x 480
31.469
59.94
-/-
640 x 480
37.5
75.0
-/-
800 x 600
37.879
60.317
+/+
800 x 600
46.875
75.0
+/+
1024 x 768
48.363
60.0
-/-
1024 x 768
60.123
75.029
+/+
1152 x 864
67.5
75.0
+/+
1280 x 720
45
60
+/+
1280 x 1024
63.981
60.02
+/+
1280 x 1024
79.976
75.025
+/+
1600 x 900
60.0
60.0
+/+
1680 x 1050
65.29
59.954
-/+
1920 x 1080
67.5
60
+/-
2560 x 1080
66.7
60
-/+
* * DVI: DTV Mode is not supported (interlace mode)
HDMI Timing (Video)
Preset Mode
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
480P
31.5
60
576P
31.25
50
720P
37.5
50
720P
45
60
1080P
56.25
50
1080P
67.5
60
Power LED
Mode
LED Color
On Mode
White (only 15 seconds)
Power Saving Mode
Flashing White
Off Mode
Off
Remarks
Remarks
PROPER POSTURE
41
Proper Posture for Using the Monitor
Adjust the screen so that you can comfortably look at it at a slight downward angle from your natural eye
level.
y y Take a break for approximately 10 minutes every hour to reduce any fatigue caused by prolonged
usage.
y y The stand of the touch monitor allows the product to be used in the optimum position.
y y Adjust the stand angle from -5° to 15° (34UM64 / 34UM65) / -5° to 20° (25UM64 / 25UM65) to obtain
the best view of the screen.
Stand Angle
You should be looking
-5° to 15° (34UM64 /
slightly down at the
34UM65) /
screen.
-5° to 20° (25UM64 /
25UM65)
Adjust the position of
the screen to minimize reflections.
Place your hands gently
on the keyboard,
keeping your arms bent at
the elbows
and extended horizontally
in front of you.
ENGLISH
PROPER POSTURE
This device meets the EMC requirements for
home appliances (Class B) and is intended
for home usage. This device can be used in
all regions. Read the owner's manual (CD)
carefully and keep it at hand. Please note that
the label attached to the product provides
information for technical support.
Model
Serial No.
ENERGY STAR is a set of power-saving
guidelines issued by the U.S.Environmental
Protection Agency (EPA).
As an ENERGY STAR Partner LGE
U. S. A., Inc. has determined that
this product meets the ENERGY
STAR guidelines for energy
efficiency.
Refer to ENERGY STAR.gov for more
information on the ENERGY STAR program.
Download PDF