LG | 34UC97 | LG 34UC97 Owner’s Manual

OWNER'S MANUAL
IPS LED MONITOR
*
(LED MONITOR )
** LG LED Monitor applies LCD screen with LED backlights.
Please read the safety information carefully
before using the product.
34UC97
34UC97C
www.lg.com
2
Table of Contents
ENGLISH
TABLE OF CONTENTS
3LICENSE
18 USER SETTINGS
18
Activating the Main Menu
18
- Main Menu Features
PREPARING
19
User Settings
4
Product Composition
19
- Menu Settings
5
Product and Button Description
20
-Ratio
5
- How to Use the Joystick Button
21
-Function
6
- Input Connector
22
-PBP
7
Moving and Lifting the Monitor
24
-Picture
8
Installing the Monitor
25
-Color
8
- Assembling the Stand
26
-Settings
9
- Installing on a Table
27
-Reset
10
- Tidying up Cables
10
- Adjusting the Angle
11
- Using the Kensington Lock
11
- Installing on the Wall
13
- Installing the Wall Mount Bracket
4ASSEMBLING AND
14 USING THE MONITOR
14
Connecting to a PC
14
- HDMI Connection
15
- DisplayPort Connection
15
- Thunderbolt ( ) Connection
16
Connecting AV Devices
16
- HDMI Connection
16
Connecting Peripherals
16
- USB Cable connection - PC
17
- Connecting Headphones
28TROUBLESHOOTING
30 PRODUCT SPECIFICATION
32
Factory Support Mode
32
HDMI Timing (Video)
32
Power LED
33 PROPER POSTURE
33
Proper Posture for Using the Monitor
License
3
LICENSE
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
VESA, VESA logo, DisplayPort compliance logo and DisplayPort compliance
logo for dual-mode source devices are all registered trademarks of the Video
Electronics Standards Association.
MaxxAudio and additional MAXX trademarks are trademarks and/or registered
trademarks of Waves Audio Ltd.
ENGLISH
Each model has different licenses. Visit www.lg.com for more information on the license.
4
ASSEMBLING AND PREPARING
ENGLISH
ASSEMBLING AND PREPARING
Product Composition
Please check whether all the components are included in the box before using the product. If there are
any missing components, contact the retailer where you purchased the product. Note that the product and
related components may look different from those shown here.
CD (Owner's Manual /
Software/ Guides) / Cards
Power cord
AC/DC Adapter
HDMI cable
DisplayPort Cable
Stand Body
Stand Base
4 Screws
(M4 x L10)
Screw Cover
Input connector cover
Wall mount bracket
(Varies depending upon
your country or model.)
CAUTION
yy Always use genuine LG components to ensure safety and product performance.
yy The product warranty will not cover damage or injury caused by the use of unauthorized components.
yy It is recommend that use the supplied components.
yy If you use generic cables not certified by LG, the screen may not display or there may be image
noises.
NOTE
yy The components may look different from those illustrated here.
yy Without prior notice, all product information and specifications contained in this manual are subject to
change to improve the performance of the product.
yy To purchase optional accessories, visit an electronics store or an online shopping site, or contact the
retailer from which you purchased the product.
yy The power cord provided may differ depending upon the region.
ASSEMBLING AND PREPARING
5
Product and Button Description
ENGLISH
Joystick Button /
Power LED
yy On Power on
yy Off Power off
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with
your finger.
Basic Functions
◄/►
Power on
Press the joystick button once with your finger to turn on the
monitor.
Power off
Press and hold the joystick button once with your finger to turn off
the monitor.
Volume
Control
You can control the volume by moving the joystick button left/right.
NOTE
yy The joystick button is located at the bottom of the monitor.
yy Before turning on the monitor, please make sure that the DC switch on the rear side of product is On.
6
ASSEMBLING AND PREPARING
Input Connector
ENGLISH
ON
DC switch
34UC97
DC-IN
(19 V
)
H/P
HDMI IN 1 HDMI IN 2
DP-IN
USB UP
USB IN 1
USB IN 2
HDMI IN 1 HDMI IN 2
DP-IN
USB UP
USB IN 1
USB IN 2
5V
1.1 A
5V
1.1 A
34UC97C
DC-IN
(19 V
)
H/P
5V
1.1 A
5V
1.1 A
ASSEMBLING AND PREPARING
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe transportation, regardless of its shape or size.
CAUTION
yy Avoid touching the monitor screen as much as
possible.
-- This may result in damage to the screen or
some of the pixels used to create images.
yy Place the monitor in the original box or packing material before attempting to move it.
yy Before moving or lifting the monitor, disconnect the power cord and all other cables.
yy Hold the bottom and side of the monitor frame
firmly. Do not hold the panel itself.
yy If you use the monitor panel without the stand
base, its joystick button may cause the monitor to become unstable and fall, resulting in
damage to the monitor or human injury. In
addition, this may cause the joystick button to
malfunction.
yy When holding the monitor, the screen should
face toward you to prevent it from being
scratched.
yy When transporting the monitor, do not expose
the monitor to shock or excessive vibration.
yy When moving the monitor, keep it upright and
never turn the monitor on its side or tilt it sideways.
ENGLISH
Moving and Lifting the
Monitor
7
8
ASSEMBLING AND PREPARING
Installing the Monitor
3
ENGLISH
Stand Body
Assembling the Stand
1
Stand Base
4
CAUTION
yy To protect the screen, place the screen face
down on the screen pad which is inside the
box.
5
2
Stand Hinge
Screw Cover
ASSEMBLING AND PREPARING
6
Input connector cover
9
Installing on a Table
upright position. Place the monitor at least
10 cm away from the wall to ensure sufficient
ventilation.
10 cm
10 cm
10 cm
10 cm
CAUTION
yy Illustrations in this document represent typical procedures, so they may look different
from the actual product.
yy Applying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be covered by the product warranty.
yy Be careful not to hurt your hand on the edges
of the screw covers.
yy Do not carry the monitor upside down by just
holding the base. This may cause the monitor to fall off the stand and could result in
personal injury.
yy When lifting or moving the monitor, do not
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
NOTE
yy You can disassemble the stand in the
reverse order of the assembly.
2 Connect the power adapter to the monitor and
then plug the power cord into the wall outlet.
3 Press the joystick button on the bottom of the
monitor to turn on the monitor.
CAUTION
yy Unplug the power cord before moving or
installing the monitor. There is risk of electric
shock.
ENGLISH
1 Lift the monitor and place it on the table in an
10
ASSEMBLING AND PREPARING
Cautions When Connecting Power Cord
Adjusting the Angle
ENGLISH
1 Place the monitor mounted on the stand base
2
in an upright position.
Adjust the angle of the screen. The angle of
the screen can be adjusted forward or backward from -5° to 15° for a comfortable
viewing experience.
15
100-240 V ~
yy Make sure to use the power cord that is provided in the product package and connect it to
a grounded power outlet.
yy If you need another power cord, please contact your local dealer or the nearest retail
store.
Rear
-5
Front
Tidying up Cables
Arrange the cables using the input connector cover
as shown in the illustration.
WARNING
yy To avoid injury to the fingers when adjusting
the screen, do not hold the lower part of the
monitor's frame as illustrated below.
15
yy Be careful not to touch or press the screen
area when adjusting the angle of the monitor.
-5
15
-5
ASSEMBLING AND PREPARING
11
Installing on the Wall
The connector for the Kensington security system
is located at the bottom of the monitor.
For more information on installation and usage,
refer to the Kensington lock owner's manual or visit
the website at http://www.kensington.com.
Install the monitor at least 10 cm away from the
wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from
your local retail store. Alternatively, please refer
to the manual for how to install and set up a tilting
wall mounting bracket.
Connect the monitor to a table using the Kensington security system cable.
10 cm
10 cm
10 cm
10 cm
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
NOTE
yy The Kensington security system is optional.
You can obtain optional accessories from most
electronics stores.
1 If you use screws longer than the standard
2
length, it may damage the inside of the
product.
A non-VESA standard screw may damage the
product and cause the monitor to fall. LG Electronics is not liable for any accidents relating to
the use of non-standard screws.
Wall Mount (A x B)
Stand Screw
Required Screws
Wall Mount Plate
(Optional)
100 x 100
M4 x L10
4
RW120
ENGLISH
Using the Kensington Lock
12
ASSEMBLING AND PREPARING
yy Wall Mount (A x B)
CAUTION
ENGLISH
A
B
NOTE
yy Use the screws specified by VESA standards.
yy The wall mount kit includes the installation guide
and all necessary parts.
yy The wall mounting bracket is optional. You can
obtain optional accessories from your local dealer.
yy The length of the screw may differ for each wall
mounting bracket. Be sure to use the proper
length.
yy For more information, please refer to the user
manual for the wall mounting bracket.
yy Unplug the power cord before moving or installing the monitor to avoid electric shock.
yy Installing the monitor on the ceiling or on a
slanted wall may result in the monitor falling off,
which could lead to injury. Use an authorized LG
wall mount and contact the local dealer or qualified personnel.
yy Applying excessive force when tightening
screws may cause damage to the monitor. Damage caused in this way will not be covered by
the product warranty.
yy Use the wall mounting bracket and screws that
conform to VESA standards. Damage caused by
the use or misuse of inappropriate components
will not be covered by the product warranty.
yy When measured from the back of the monitor,
the length of each installed screw must be 8 mm
or less.
Wall Mount Plate
Back of the Monitor
Wall Mount Plate
Back of the Monitor
Screw
Dimensions
: M4 x L10
Max 8 mm
ASSEMBLING AND PREPARING
Installing the Wall Mount Bracket
ENGLISH
Wall mount bracket
Stand Hinge
3
NOTE
yy Be careful not to apply too much force while
mounting the wall mount bracket as it may
cause damage to the screen.
yy Applying excessive force when tightening
screws may cause damage to the monitor. Damage caused in this way will not be covered by
the product warranty.
1
2
13
14
Using the Monitor
ENGLISH
USING THE MONITOR
yy The following instructions are based on the
34UC97 model. Illustrations in this manual
may differ from the actual product.
Press the joystick button, go to Menu → Easy control → Input, and then select the input option.
CAUTION
yy Do not press the screen for a prolonged time.
This may cause image distortion.
yy Do not display a still image on the screen
for a prolonged time. This may cause image
retention. Use a screensaver if possible.
Connecting to a PC
yy This monitor supports the *Plug and Play feature.
H/P
* Plug and Play: A feature that allows you to add a
device to your computer without having to reconfigure anything or install any manual drivers.
HDMI Connection
Transmits digital video and audio signals from your
PC to the monitor. Connect your PC to the monitor
using the HDMI cable as shown in the illustration
below.
HDMI IN 1 HDMI IN 2
NOTE
yy When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a
grounded power outlet.
yy The monitor may flicker when turned on in
an area where the temperature is low. This is
normal.
yy Sometimes red, green, or blue spots may appear on the screen. This is normal.
HDMI IN 1 HDMI IN 2
CAUTION
yy Make sure to use the supplied HDMI cable of
the product. Otherwise, this may cause the
device to malfunction.
yy Connecting your PC to the monitor using the
HDMI cable may cause device compatibility
issues.
yy Using a DVI to HDMI / DP (DisplayPort) to
HDMI cable may cause compatibility issues.
yy Use a certified cable with the HDMI logo
attached. If you do not use a certified HDMI
cable, the screen may not display or a connection error may occur.
yy Recommended HDMI cable types
-- High-Speed HDMI®/TM cable
DP-IN
-- High-Speed HDMI®/TM cable with Ethernet
Using the Monitor
15
Thunderbolt ( ) Connection
Transmits digital video and audio signals from your
PC to the monitor. Connect the monitor to your PC
using the display port cable as shown in the illustration below:
You can connect your high-resolution display or
high-performance data device to the monitor via a
Thunderbolt port. Connect your external device to
the monitor using the Thunderbolt cable as illustrated below.
DP-IN
ENGLISH
DisplayPort Connection
34UC97
(sold separately)
DP OUT
NOTE
yy There may be no video or audio output depending on the DP (DisplayPort) version of the
PC.
yy Make sure to use the supplied DisplayPort
cable of the product. Otherwise, this may
cause the device to malfunction.
yy For using Mini DP to DP (Mini DisplayPort to
DisplayPort) cable, it is recommended that you
use DisplayPort 1.2 cable.
NOTE
USB UP
USB IN 1
USB IN 2
each
yy The maximum data transmission rate
5 V of 1.1
A
5V
port is 20 Gb/s.
yy Make sure to use a Thunderbolt ( ) certified
cable. Otherwise, this may cause the device to
malfunction.
yy Thunderbolt ( ) is supported in such environments as Windows 7, Windows 8.1, and Mac
product.
yy In accordance with Mac products may not
support the recommended resolution or the
some features. For more information, refer to
the support information card of Mac which is
provided separately.
yy The ability to set up dual monitors using the
Thunderbolt ( ) and daisy-chaining technology
depends on the performance of your video
card.
USB UP
USB IN 1
5V
1.1 A
1.1 A
USB IN 2
5V
1.1 A
16
Using the Monitor
ENGLISH
Connecting AV Devices
Connecting Peripherals
HDMI Connection
USB Cable connection - PC
HDMI transmits digital video and audio signals
from your AV device to the monitor. Connect your
AV device to the monitor using the HDMI cable as
shown in the illustration below.
The USB port on the product functions as a USB
hub.
NOTE
yy Make sure to install the most recent Windows
OS service pack before using the product.
yy Peripheral devices are sold separately.
yy A keyboard, mouse, or USB device can be
connected to the USB port.
HDMI IN 1 HDMI IN 2
CAUTION
NOTE
DP-IN
yy Make sure to use the supplied HDMI cable of
the product. Otherwise, this may cause the
device to malfunction.
yy Using a DVI to HDMI / DP (DisplayPort) to
HDMI cable may cause compatibility issues.
yy Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI
cable, the screen may not display or a connection error may occur.
yy Recommended HDMI cable types
DP OUT
-- High-Speed HDMI®/TM cable
-- High-Speed HDMI®/TM cable with Ethernet
Cautions When Using a USB Device
yy A USB device with an automatic recognition
program installed, or that uses its own driver,
may not be recognized.
yy Some USB devices may not be supported or
may not work properly.
yy It is recommended to use a USB hub or hard
disk drive with power supplied. (If the power
supply is not adequate, the USB device may
not be recognized properly.)
Using the Monitor
HDMI/DP (DisplayPort) connection
USB UP
USB IN 1
5V
Connecting Headphones
Connect peripherals to the monitor via the headphones port. Connect as illustrated.
H/P
USB IN 2
1.1 A
5V
1.1 A
(sold separately)
(sold separately)
USB UP
USB IN 1
5V
1.1 A
USB IN 2
5V
1.1 A
(sold separately)
NOTE
HDMI IN 1 HDMI IN 2
yy Peripheral devices are sold separately.
yy If you use angled earphones, it may cause
a problem with connecting another external
device to the monitor. Therefore, it is recommended to use straight earphones.
Thunderbolt ( ) connection
USB UP
USB IN 1
USB IN 2
Peripheral devices connected to
USB 5IN
5 V the
1.1 A
V port
1.1 A
can be controlled from the PC.
If you change the input on the menu while a device
is in connection via the Thunderbolt port, then the
device in connection via the USB port may not
work properly.
34UC97
USB UP
USB IN 1
5V
1.1 A
USB IN 2
5V
1.1 A
Angled
Straight
yy Depending on the audio settings of the PC
and external device, headphones and speaker
functions may be limited.
HDMI IN 1 HDMI IN 2
(sold separately)
(sold separately)
DP-IN
ENGLISH
To use USB 3.0, connect the A-B type USB 3.0
cable of the product to the PC.
Peripheral devices connected to the USB IN port
can be controlled from the PC.
17
18
User Settings
ENGLISH
USER SETTINGS
Activating the Main Menu
1 Press the joystick button on the bottom of the monitor.
2 Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options.
3 Press the joystick button once more to exit the main menu.
Joystick Button
Button
Menu Status
Description
Main menu disabled
Enables the main menu.
Main menu enabled
Exits the main menu.
(Holding down the button to turn off the monitor. You can turn off
the monitor this way at any time, including when the OSD is on.)
◄
Main menu disabled Adjusts the monitor volume level.
Main menu enabled
►
Main menu disabled Adjusts the monitor volume level.
Main menu enabled
▲
Enters the PBP feature.
Main menu disabled Enables the main menu.
Main menu enabled
▼
Enters the menu features.
Enters the MaxxAudio feature.
Main menu disabled Enables the main menu.
Main menu enabled
Turns off the monitor.
Main Menu Features
Main Menu
MaxxAudio
Menu
Exit
PBP
Monitor off
Long press: Monitor off
Description
Menu
Configures the screen settings.
MaxxAudio
Sets the sound quality.
PBP
Displays the screens of two input modes on one monitor.
Monitor off
Turns off the monitor.
Exit
Exits the main menu.
User Settings
19
User Settings
1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the
Menu.
Configure the options by moving the joystick up/down/left/right.
2
3 To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it.
4 If you want to exit the OSD menu, move the joystick to ◄ until you exit.
yy When you enter the menu, instructions on how to use the button will appear in the bottom right corner
of the screen.
Easy control
Function
PBP
Screen
Settings
Reset
Each option is described below.
Menu
Easy control
Brightness
Contrast
Volume
Description
Adjusts the color contrast and brightness of the screen.
Adjusts the volume level.
NOTE
yy You can adjust Mute/ Unmute by moving the joystick button to ▼ in the Volume
menu.
Input
Selects the input mode.
Ratio
Adjusts the aspect ratio of the screen.
Function
Adjusts MaxxAudio, Reader Mode, Picture Mode, and SMART ENERGY SAVING.
PBP
PBP
Displays the screens of two input modes on one monitor.
Screen
Picture
Adjusts the Sharpness, Black level, and Response Time of the screen.
Color
Adjusts Gamma, Color Temperature, Red, Green, Blue, and Six Color.
Settings
Adjusts Language, Power LED, Automatic Standby, DisplayPort 1.2, and OSD Lock.
Reset
◄
Restores the default settings.
Exit
Exits the OSD menu.
CAUTION
yy Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.
ENGLISH
Menu Settings
20
User Settings
Ratio
ENGLISH
1
Easy control
To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
Go to Easy control > Ratio by moving the joystick.
2
3 Configure the options following the instructions that appear
4
5
100
>
Contrast
70
>
Volume
30
>
Input
HDMI1
>
Ratio
Wide
>
Brightness
in the bottom right corner.
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Easy control
Function
PBP
Screen
Settings
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Easy control > Ratio
Description
Wide
Displays the video in widescreen, regardless of the video signal input.
Original
Displays video according to the aspect ratio of the video signal input.
Cinema 1
Enlarges the screen with an aspect ratio of 21:9. (at 1080p)
Cinema 2
Enlarges the screen with an aspect ratio of 21:9, including the black box at the
bottom for subtitles. (at 1080p)
1:1
The aspect ratio is not adjusted from the original.
NOTE
yy The display may look the same for Wide, Original, and 1:1 options at the recommended resolution
(3440 x 1440).
yy The ratio is disabled in the interlaced signal.
21
User Settings
Function
To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
Go to Function by moving the joystick.
Easy control
2
3 Configure the options following the instructions that appear in
Function
the bottom right corner.
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Reader Mode
Off
>
Picture Mode
Custom
>
Low
>
SMART ENERGY SAVING
PBP
4 To return to the upper menu or set other menu items, move
5
>
Screen
Settings
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Function
MaxxAudio
(Move the joystick to
▲ in the main menu
to enter the function
directly.)
Reader Mode
Picture Mode
SMART ENERGY
SAVING
Description
MaxxAudio
MaxxAudio
Settings
On
MaxxAudio® by Waves, recipient of a Technical GRAMMY
Award® is a suite of studio-quality sound tools for a superior
listening experience.
Off
Disables the MaxxAudio function.
The user can set the sound quality manually.
MaxxBass
Bass Enhancement.
MaxxTreble
Treble Enhancement.
MaxxDialog
Dialog Enhancement.
Maxx3D
Enhances the three dimensional effect of the sound.
Reset
Returns the sound quality to the default settings.
Midnight Mode
Lets you enjoy rich and full sound at a low volume.
Reader 1
Optimizes the screen for browsing newspapers. You can brighten the screen
in the OSD menu.
Reader 2
Optimizes the screen for looking at cartoons. You can brighten the screen in
the OSD menu.
Reader Off
Reader Mode is off.
Custom
Allows the user to adjust settings. You can adjust the color mode of the main
menu.
Photo
Optimizes the screen for photos.
Cinema
Optimizes the screen for videos.
Game
Optimizes the screen for games.
High
Saves energy using the high-efficiency SMART ENERGY SAVING feature.
Low
Saves energy using the low-efficiency SMART ENERGY SAVING feature.
Off
Disables the SMART ENERGY SAVING feature.
ENGLISH
1
Function
MaxxAudio
22
User Settings
PBP
ENGLISH
1
PBP
PBP
To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
Go to PBP by movingthe joystick.
2
3 Configure the options following the instructions that appear in
4
5
Easy control
Off
>
Input
Audio
Function
>
HDMI1
>
Swap
Sub Full
the bottom right corner.
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
PBP
>
Ratio
Screen
Settings
PBP Preview
Reset
HDMI1
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > PBP
PBP
Description
Displays the screens of two input modes on one monitor.
Sub Screen (Right)
HDMI 1
HDMI 2
DisplayPort
Thunderbolt ( )
(only 34UC97
model)
HDMI 1
-
O
X
X
PBP Connection
Main
Screen
(Left)
Input
HDMI 2
O
-
X
X
DisplayPort
O
O
-
X
Thunderbolt ( )
(only 34UC97
model)
O
O
X
-
Main
Selects the video signal input of the main screen.
Sub
Selects the video signal input of the sub screen.
Audio
Changes the audio output in PBP mode.
Swap
Toggles between the main screen and sub screen in PBP mode.
Sub Full
Converts the sub screen in PBP mode to wide screen.
User Settings
Menu > PBP
Description
Adjusts the aspect ratio of the main screen or sub screen.
Main
Sub
Wide
Displays the video to fit the PBP screen, regardless of the
video signal input.
Original
Displays the video in the aspect ratio of the video signal input
on the PBP screen.
Wide
Displays the video to fit the PBP screen, regardless of the
video signal input.
Original
Displays the video in the aspect ratio of the video signal input
on the PBP screen.
NOTE
yy When the PBP mode is Off, Input, Audio, Swap, Sub Full, and Ratio menus become disabled.
The Main/Sub options for Ratio become disabled if there is no signal.
yy The optimal resolution for PBP mode is set automatically when PBP mode is set. (only 34UC97C
model)
ENGLISH
Ratio
23
24
User Settings
Picture
ENGLISH
1
Picture
2
3 Configure the options following the instructions that appear in
Easy control
>
High
>
Middle
>
Black Level
Response Time
Function
the bottom right corner.
PBP
4 To return to the upper menu or set other menu items, move
5
5
Sharpness
To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
Go to Screen > Picture by moving the joystick.
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Screen
Settings
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Screen > Picture
Description
Sharpness
Adjusts the sharpness of the screen.
Black Level
Sets the offset level (for HDMI only).
• Offset: as a reference for a video signal, this is the darkest color the monitor can display.
Response Time
High
The picture of the screen gets brighter.
Low
The picture of the screen gets darker.
Sets a response time for displayed pictures based on the speed of the screen.
For a normal environment, it is recommended that you use Middle. For a fast-moving
picture, it is recommended that you use high.
Setting to High may cause image sticking.
High
Sets the response time to High.
Middle
Sets the response time to Middle.
Low
Sets the response time to Low.
Off
Does not use the response time improvement feature.
25
User Settings
Color
Color
Gamma
Easy control
bottom of the monitor and then enter the Menu.
Go to Screen > Color by moving the joystick.
2
3 Configure the options following the instructions that appear in
4
5
Function
the bottom right corner.
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
PBP
Gamma 1
>
Custom
>
Red
50
>
Green
50
>
Blue
50
>
Color Temp
Six Color
>
Reset
>
Screen
Settings
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Screen > Color
Description
Gamma
Custom gamma settings: When using the gamma 0, gamma 1, and gamma 2 monitor settings, higher gamma settings mean a brighter image is displayed and vice versa.
Color Temp
Custom
The user can adjust it to red, green, or blue by customization.
Warm
Sets the screen color to a reddish tone.
Medium
Sets the screen color to between a red and blue tone.
Cool
Sets the screen color to a bluish tone.
Red
You can customize the picture color using Red, Green, and Blue colors.
Green
Blue
Six Color
Meets the user requirements for colors by adjusting the hue and saturation of the six colors
(red, green, blue, cyan, magenta, and yellow) and then saving the settings.
Hue
Adjusts the tone of the screen colors.
Saturation Adjusts the saturation of the screen colors. The lower the value, the less saturated and brighter the colors become. The higher the value, the more saturated
and darker the colors become.
Reset
Returns color to the default settings.
ENGLISH
1 To view the OSD menu, press the joystick button at the
26
User Settings
Settings
Settings
ENGLISH
1 To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
Go to Settings by moving the joystick.
2
3 Configure the options following the instructions that appear in
4
5
English
>
Power LED
On
>
Automatic Standby
Off
>
Disable
>
Off
>
Language
the bottom right corner.
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Easy control
Function
DisplayPort 1.2
OSD Lock
PBP
Screen
Settings
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Settings
Description
Language
Sets the menu screen to the desired language.
Power LED
Turns the power LED on the front of the monitor on or off.
On
The power LED turns on automatically.
Off
The power LED turns off.
Automatic
Standby
Feature that automatically turns off the monitor when there is no movement on the screen for a
period of time. You can set a timer for the auto-off function. (Off, 4 H, 6 H, and 8 H)
DisplayPort 1.2
Enables or disables DisplayPort 1.2.
NOTE
yy Be sure to configure this option according to the DisplayPort version supported by your
graphics card. Set this option to Disable if your graphics card does not support DisplayPort
1.2.
OSD Lock
Prevents incorrect key input.
On
Disables key input
Off
Enables key input
NOTE
yy All features are disabled except Brightness, Contrast, Volume, Input, OSD Lock in Settings,
and the Exit button.
User Settings
Reset
Reset
Do you want to reset your settings?
To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
Go to Reset by moving the joystick.
Easy control
2
3 Configure the options following the instructions that appear in
the bottom right corner.
4 To return to the upper menu or set other menu items, move
5
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
ENGLISH
1
27
Reset
Cancel
Function
PBP
Screen
Settings
Reset
▲/▼: Move
Each option is described below.
Menu > Reset
Description
Do you want to reset your settings?
Reset
Restores the default settings.
Cancel
Cancel the reset.
/ ►: OK
◄: Back
28
Troubleshooting
ENGLISH
TROUBLESHOOTING
Nothing is displayed on the screen.
Is the monitor's power cord
yy Check if the power cord is correctly plugged into the power outlet.
plugged in?
Is the power LED on?
yy Check the power cable connection and press the power button.
Is the power on and the power
LED displaying white?
Is the power LED blinking?
Is the OUT OF RANGE message being displayed?
Is the No Signal message being
displayed?
The screen may not be displayed properly when configuring DisplayPort 1.2 in a Mac
product.
yy Check that the connected input is enabled (Menu - Input).
yy If the monitor is in sleep mode, move the mouse, or press any key
on the keyboard, to switch the display on.
yy Check if the computer is turned on.
yy This occurs when signals transferred from the PC (video card) are
out of the horizontal or vertical frequency range of the monitor.
Please see the Product Specification section of this manual to set
the appropriate frequency.
yy This is displayed when the signal cable between the PC and the
monitor is missing or disconnected. Check the cable and reconnect
it.
yy DisplayPort 1.2 may not be supported depending upon the Mac
product. Please contact the manufacturer.
The OSD Lock message is being displayed.
Are some functions not availyy The OSD is locked. Go to Menu > Settings and set OSD Lock to Off.
able when you press the Menu
button?
The screen retains an image.
Does image sticking occur even
when the monitor is turned off?
yy Displaying a still image for a prolonged time may cause damage to
the screen, resulting in the retention of the image.
yy To extend the lifetime of the monitor, use a screensaver.
Screen display is unstable and shaky / Images displayed on the monitor leave shadow trails.
Did you select the appropriate
yy If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the
resolution?
screen may be flickering. Change the resolution to 1080p or the
recommended resolution.
NOTE
yy Vertical Frequency: In order to display an image, the screen must be refreshed dozens of times per
second, like a fluorescent lamp. The number of times the screen is refreshed per second is called
vertical frequency, or refresh rate, and is represented by Hz.
yy Horizontal Frequency: The time it takes to display one horizontal line is called the horizontal cycle. If
1 is divided by the horizontal interval, the result is the number of horizontal lines displayed per second.
This is called horizontal frequency and is represented by kHz.
Troubleshooting
29
NOTE
The display color is abnormal.
Does the display appear discolored (16 colors)?
Does the display color appear
unstable or monochrome?
Are there spots on the screen?
yy Set the color to 24 bit (true color) or higher. In Windows, go to Control Panel > Display > Settings > Color Quality.
yy Check if the signal cable is connected properly. Reconnect the cable
or reinsert the PC's video card.
yy When using the monitor, pixilated spots (red, green, blue, white, or
black) may appear on the screen. This is normal for an LCD screen.
It is not an error, nor is it related to the monitor's performance.
No sound from the headphone port.
Are images displayed using
yy Make sure that the headphone port connections are made properly.
DP (DisplayPort) or HDMI input
yy Try increasing the volume with the joystick.
without sound?
yy Set the audio output of the PC to the monitor you are using. On
Microsoft Windows, go to Control Panel > Hardware and Sound >
Sound > set the monitor as default device.
ENGLISH
yy Check if the video card's resolution or frequency is within the range allowed by the monitor and set it to
the recommended (optimal) resolution in Control Panel > Display > Settings.
yy Not setting the video card to the recommended (optimal) resolution may result in blurred text, a dimmed
screen, a truncated display area or misalignment of the display.
yy The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the performance of the video card. If this is the case, contact
the manufacturer of the computer or video card for assistance.
yy Some video cards may not support 3440 x 1440 resolution. If the resolution cannot be displayed, contact the manufacturer of your video card.
30
Product Specification
ENGLISH
PRODUCT SPECIFICATION
34UC97
LCD Screen
Resolution
Video Signal
Input Connector
Power Sources
AC/DC Adapter
Stand Angle
Environmental
Conditions
Audio Output
Supported
Operating System
Dimensions
Weight (Without
Packaging)
Type
Color Depth
TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Screen
HDMI
8-bit color is supported.
DP (DisplayPort)
10-bit color is supported.
8-bit color is supported.
Thunderbolt ( )
Pixel Pitch
0.2325 mm x 0.2325 mm
HDMI
Max Resolution
Recommended Resolution
DP (DisplayPort)
Max Resolution
Thunderbolt ( )
Recommended Resolution
Horizontal Frequency 30 kHz to 90 kHz
Vertical Frequency
56 Hz to 61 Hz
Synchronization
Separate Sync.
3440 x 1440 @ 50 Hz
3440 x 1440 @ 50 Hz
3440 x 1440 @ 60 Hz
3440 x 1440 @ 60 Hz
H/P OUT, HDMI IN 1, HDMI IN 2, DP (DisplayPort) IN, Thunderbolt ( ), USB UP,
USB IN 1, 2
Power Rating
19 V
6.0 A
Power Consumption Operating Mode: 80 W (Typical, USB excluded) (Outgoing
(Typical)
condition)
Sleep Mode ≤ 1.2 W
Off Mode ≤ 0.5 W
Off Mode ≤ 0.3 W (DC switch is off.)
LCAP31 type, manufactured by Lienchang
Output: 19 V
7.37 A
Forward/Backward: -5° to 15° (Head)
Operating Conditions Temperature 0°C to 40°C
Humidity Less than 80%
Storing Conditions
Temperature -20°C to 60°C
Humidity Less than 85%
7W+7W
Win 7, Win 8.1, Mac OS*
Monitor Size (Width x Height x Depth)
With Stand
830.5 mm x 472.9 mm x 225.6 mm
Without Stand
830.5 mm x 370.3 mm x 99 mm
With Stand
9.0 kg
Without Stand
8.25 kg
Specifications are subject to change without notice.
* In accordance with Mac products may not support the recommended resolution or the some features.
(For more information, refer to the support information card of Mac which is provided separately.)
Product Specification
31
34UC97C
Type
Color Depth
Pixel Pitch
Resolution
Video Signal
Input Connector
Power Sources
AC/DC Adapter
Stand Angle
Environmental
Conditions
Audio Output
Supported
Operating System
Dimensions
Weight (Without
Packaging)
TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Screen
HDMI
8-bit color is supported.
DP (DisplayPort)
10-bit color is supported.
0.2325 mm x 0.2325 mm
HDMI
Max Resolution
3440 x 1440 @ 50 Hz
Recommended Resolution
3440 x 1440 @ 50 Hz
DP (DisplayPort)
Max Resolution
3440 x 1440 @ 60 Hz
Recommended Resolution
3440 x 1440 @ 60 Hz
Horizontal Frequency 30 kHz to 90 kHz
56 Hz to 61 Hz
Vertical Frequency
Synchronization
Separate Sync.
H/P OUT, HDMI IN 1, HDMI IN 2, DP (DisplayPort) IN, USB UP, USB IN 1, 2
Power Rating
Power Consumption
(Typical)
19 V
4.0 A
Operating Mode: 70 W (Typical, USB excluded) (Outgoing
condition)
Sleep Mode ≤ 1.2 W
Off Mode ≤ 0.5 W
Off Mode ≤ 0.3 W (DC switch is off.)
ADS-110CL-19-3-190110G type, manufactured by Honor
Output: 19 V
5.79 A
Forward/Backward: -5° to 15° (Head)
Operating Conditions Temperature 0°C to 40°C
Humidity Less than 80%
Storing Conditions
Temperature -20°C to 60°C
Humidity Less than 85%
7W+7W
Win 7, Win 8.1, Mac OS
Monitor Size (Width x Height x Depth)
With Stand
830.5 mm x 472.9 mm x 225.6 mm
Without Stand
830.5 mm x 370.3 mm x 99 mm
With Stand
9.0 kg
Without Stand
8.25 kg
Specifications are subject to change without notice.
ENGLISH
LCD Screen
32
Product Specification
Factory Support Mode
ENGLISH
34UC97
34UC97C
(Preset Mode, HDMI/ DisplayPort/ Thunderbolt PC)
(Preset Mode, HDMI/ DisplayPort PC)
Preset Mode
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Polarity (H/V)
640 x 480
31.469
59.94
-/-
800 x 600
37.879
60.317
+/+
1024 x 768
48.363
60
-/-
1152 x 864
54.347
60.05
+/+
1280 x 720
45
60
+/+
1280 x 1024
63.981
60.02
+/+
1600 x 900
60
60
+/+
1680 x 1050
65.29
59.954
-/+
1920 x 1080
67.5
60
+/-
2560 x 1080
66.7
60
-/+
3440 x 1440
43.82
29.99
+/+
3440 x 1440
73.68
49.99
+/+
3440 x 1440
88.82
59.97
+/+
Remarks
HDMI Timing (Video)
Preset Mode
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
480p
31.5
60
720p
45
60
1080p
67.5
60
Power LED
Mode
LED Color
On Mode
White
Sleep Mode
Flashing White
Off Mode
Off
Remarks
HDMI is not supported.
PROPER POSTURE
33
Proper Posture for Using the Monitor
Adjust the screen so that you can comfortably look at it at a slight downward angle from your natural eye
level.
yy Take a break for approximately 10 minutes every hour to reduce any fatigue caused by prolonged
usage.
yy Adjust the stand angle from -5° to 15° to obtain the best view of the screen.
You should be looking
slightly down at the
screen.
Stand Angle
-5° to 15°
Adjust the position of
the screen to minimize reflections.
Place your hands gently
on the keyboard,
keeping your arms bent at
the elbows and extended
horizontally in front of you.
ENGLISH
PROPER POSTURE
This device meets the EMC requirements for
home appliances (Class B) and is intended for
home usage. This device can be used in all
regions. Read the owner's manual (CD) carefully
and keep it at hand. Please note that the label
attached to the product provides information for
technical support.
Model
Serial No.
ENERGY STAR is a set of power-saving guidelines
issued by the U.S.Environmental Protection
Agency (EPA).
As an ENERGY STAR Partner LGE
U. S. A., Inc. has determined that this
product meets the ENERGY STAR
guidelines for energy efficiency.
Refer to ENERGY STAR.gov for more
information on the ENERGY STAR program.
Download PDF

advertising