LG L1919S-SF User's Guide
Add to my manuals26 Pages
LG L1919S-BF is a high-quality display with a 19-inch screen, featuring a sleek design and advanced technology to provide an immersive viewing experience. Its 1280 x 1024 resolution and 5ms response time deliver sharp images and smooth videos, making it ideal for gaming, watching movies, and working on graphics-intensive applications. The display also boasts wide viewing angles, allowing multiple users to enjoy clear visuals from different positions.
advertisement
▼
Scroll to page 2
of 26
User's Guide L1719S/L1719SP L1919S/L1919SP Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached on the product and dealer when you ask for service. give the information to your This unit has been engineered and manufactured to ensure your personal safety, improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. however On Use Safety only the cord, make power cord supplied with the unit. In case you use another power that it is certified by the applicable national standards if not being sure provided by the supplier. If the manufacturer or power cable is faulty in any way, please contact the the nearest authorized repair service provider for a replacement. The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation. Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer. Overloaded AC outlets and extension cords cords and broken plugs. They technician for replacement. Do not Open the may result in are a dangerous. So shock or are frayed power fire hazard. Call your service Display: There are no user There are serviceable components inside. Dangerous High Voltages inside, even when the Contact your dealer if the display is not operating properly. power is OFF. To Avoid Personal Injury : Do not place the display on a sloping shelf unless properly secured. Use only a stand recommended by the manufacturer. To Prevent Fire Always or turn the Hazards: display OFF if you leave the room for more than a short period of time. Never leave the display ON when leaving the house. Keep children from dropping or pushing objects into the display's cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this display. lightning storm or when the display is to be left unattended for an extended period of time, unplug it from the wall outlet. During a On Installation Do not allow anything to rest upon or roll over the power cord, and do not the display where the power cord is subject to damage. Do not use this display sink, laundry tub, in near water a wet such basement, as near a or near a place bathtub, washbowl, kitchen swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER: Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc. Place the display in a built-in enclosure unless proper ventilation is provided. Cover the openings with cloth or other material. Place the display near or over a radiator or heat source. or strike the Active Matrix LCD with anything hard damage the Active Matrix LCD permanently. Do not rub mar, or Do not press the LCD some screen with your finger for a long time as as this may scratch, this may cause afterimages. Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance. If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel. On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly screen because over-spraying may cause electrical shock. On on the display Repacking Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material. On Disposal The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand 1. Place the monitor with its front 2. Assemble the Stand Make sure you push Body facing into the downward product soft cloth. on a in the correct direction as shown in the picture. it until you hear it "click". Stand Body R A E R 3. Assemble the 4. Stand Base(Front, Rear) into the Stand Once assembled take the monitor up carefully and Stand Body Stand Base Body R A E R in the correct direction. face the front side REA R FRO NT REA R FRO NT Important depicts the general model of connection. Your monitor may differ from picture. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. This illustration the items shown in the A3 Connecting the Display To remove the Stand: 1. Put a cushion or soft cloth on a flat surface. 2. Place the monitor face down the cushion or soft cloth. on The Head part The Stand base part 3. Hold the product as it follows and lift up the Stand 4. Change your hold on the product direction until you hear a "click." 5. Pull out the Stand to as slightly. it follows and turn the Stand Base in the remove. A4 arrow the Connecting To remove Type. 1. Display the Stand Base: A Ensure there are 2. four latches at the Hold the body of the Stand as it follows. bottom of the Stand Base. 3. Press the four latches toward each end 4. as individually shown. 5. Pull up the body of the Stand while the Stand Base with the other hand. holding The Base A5 body of the Stand and the Stand are successfully separated. the Connecting To remove Type. 1. Display the Stand Base: B Ensure there are two latches at the 2.Hold the body of the Stand as it follows. bottom of the Stand Base. 3. 4. Press the two latches individually toward each end 5. Pull up the body of the Stand while the Stand Base with the other hand. holding The as shown body Stand separated. A6 of the Stand and the Base are successfully Connecting the Display Before setting up the monitor, ensure that the power system, and other attached devices is turned off. to the monitor, the computer Positioning your display 1. Adjust the position Tilt Range : of the panel in various ways for maximum comfort. -5˚~20˚ 20 Warning: When adjusting the angle of the screen, do not put your finger(s) in between the head of the monitor and the stand body. You can hurt your finger(s). Ergonomic It is recommended that in order to maintain position, an ergonomic and comfortable viewing degrees. the forward tilt angle of the monitor should not exceed 5 A7 Connecting the Display Using the Computer 1. Place the monitor in a convenient, well-ventilated location near your computer. 2. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 1 3. Connect the power cord the display. into a proper power outlet that is easily accessible and close to 2 Power Cord Cable Signal Varies according to model. NOTE This is of the This a Wall-outlet type simplified representation rear rear view. view 2 represents a general model; your display may differ from the view as 1 shown. PC-outlet type PC MAC Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. 4. Press button on the side switch panel to turn the power When monitor power is turned on, the 'Self Function' is executed on. Image Setting automatically. (Only Analog Mode) NOTE Self Image Setting Function'? ' connects the monitor for the first This function provides the user with optimal display settings.When the user time, this function automatically adjusts the display to optimal settings for individual input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push the 'AUTO/SET' button on the side panel of the monitor. Otherwise, you may execute the Factory reset' option on the OSD adjustment menu. However, be aware that this option initializes all the menu items except 'Language'. ' A8 Control Panel Functions Side Front Panel Controls Control Function MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. Buttons Use these buttons to select Screen For or adjust functions Display. more information, refer A9 to page A16. in the On Control Panel Functions Control Function AUTO/SET Use this button to enter Button Display. a selection in the On Screen AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is 17 inch monitor : 1280 x 1024 19 inch monitor : 1280 x 1024 Power Button Use this button to turn the Power Indicator This Indicator lights display up green or on or off. blue when the display operates normally(On Mode). If the display is in Sleep Mode (Energy Saving), to amber. A10 this indicator color changes On Screen Screen Display (OSD) Control Adjustment Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the To make display to stabilize for at least 30 minutes before adjustments in the On Screen Display, follow these steps: Press the MENU Button, then the main To access a becomes control, use highlighted, the or making image adjustments. menu of the OSD appears. Buttons. When the icon you want press the AUTO/SET Button. Use the Buttons to adjust the image to the desired level. Use the / AUTO/SET Button to select other sub-menu items. Push the MENU Button once to return to the main menu to select another function. Push the MENU Button twice to exit from the OSD. A11 On Screen The and Display(OSD) Selection and following table indicates all the setting menus. Main Sub menu PICTURE On Screen Adjustment Display control, adjustment, Reference menu To BRIGHTNESS adjust the brightness, contrast and gamma of the CONTRAST screen GAMMA COLOR sRGB To customize the color of the PRESET 6500K screen 9300K RED GREEN BLUE POSITION TRACKING HORIZONTAL To VERTICAL screen CLOCK of the To improve the clarity and stability, sharpness of the PHASE screen SHARPNESS SETUP adjust the position LANGUAGE OSD HORIZONTAL To customize the screen status for a user's operating environment POSITION VERTICAL WHITE BALANCE POWER INDICATOR FACTORY RESET FLATRON F-ENGINE MOVIE / TEXT To select USER desired or customize image settings NORMAL : Adjustable NOTE The order of icons may differ depending on A12 the model (A12~A16). On Screen Selection and Display(OSD) Adjustment were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. You Press the MENU Menu Name Button, then the main menu of the OSD appears. PICTURE Sub-menus Icons Button Tip MENU : : SET Exit Adjust (Decrease/Increase) : Enter : Select another sub-menu NOTE OSD (On Screen Display) menu languages on A13 the monitor may differ from the manual. On Screen Selection and Display(OSD) Main menu Sub Adjustment Description menu PICTURE PICTURE of the BRIGHTNESS To adjust the CONTRAST To adjust the contrast of the GAMMA Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images. brightness screen. screen. MENU : Exit : Decrease : Increase SET : Select another sub-menu COLOR PRESET COLOR ? ? ? RED GREEN MENU : Exit : Decrease BLUE : Increase SET : Select another sub-menu sRGB: Set the screen color to fit the SRGB standard color specification. Slightly reddish white. 9300K: Slightly bluish white. 6500K: Set your own red color levels. Set your own green color levels. Set your own blue color levels. POSITION POSITION HORIZONTAL To move image left VERTICAL To move image MENU : Exit : Decrease : Increase SET : Select another sub-menu A14 and right. up and down. On Screen Selection and Display(OSD) Main menu Sub Adjustment Description menu TRACKING CLOCK TRACKING To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen PHASE To the image of characters. MENU : Exit : Decrease : Increase SHARPNESS To adjust the clearness of the SET : Select another sub-menu SETUP LANGUAGE To choose the control screen. language in which displayed. the names are SETUP OSD POSITION To adjust position on the of the OSD window screen. If the output of the video card is different required specifications, the color WHITE BALANCE the level may deteriorate due to video distortion. Using this function, the signal signal SETUP level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors POWER INDICATOR MENU : : SET : Exit : present in the screen. Use this function to set the power indicator on the front side of the monitor to ON Adjust Adjust are or OFF. If you set OFF, it will go off. If you set ON at any time, the power indicator will automatically be turned Select another sub-menu FACTORY Restore all factory default "LANGUAGE." RESET Press the settings except button to reset immediately. If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled the input signal is an analog signal. A15 on. only when On Screen Display(OSD) The OSD right screen Selection and Adjustment will appear when you touch the button on the side of the monitor. Menu Name Icons Sub-menu Name FLATRON F-ENGINE Screen when applied Screen when not applied When you execute F-ENGINE, two tones will appear on the screen as shown. The applied screen will appear on the left side, whereas the non-applied will appear on the right side.Touch the SET button to use the adjusted screen. screen Main Sub menu MOVIE TEXT Description menu This feature lets you easily select the best desired image condition optimized to the environment (ambient illumination, image types etc). MOVIE: For animation TEXT: For text USER adjust the USER sub-menu function, or movies User can You can save or ... Press the SET Button ... USER ... BRIGHTNESS in videos images (Word processing etc.) You when To images manually adjust brightness, ACE or RCM. restore the adjusted value even using a different envir (Brightness): Adjusts screen brightness. ACE(Adaptive Clarity Enhancer): Selects the clarity mode. RCM(Real Color Management): Selects the color mode. 0 Not 1 Green enhance ACE 1 RCM applied 2 Flesh tone 3 Color Enhance 2 SAVE Select the SAVE sub-menu using the SET button and save the YES value using the buttons. NORMAL This is under normal A16 operating conditions. Troubleshooting Check the No following before calling for service. image appears Is the power cord of the display connected? Is the power indicator light on? Is the power on and the power indicator blue or ? Check and properly ? ? see if the power cord is connected to the power outlet. Press the Power button. Adjust the brightness and the contrast. green? Is the power indicator amber? ? If the the display mouse or is in power saving mode, try moving pressing any key on the keyboard to bring up the screen. ?TrytoturnonthePC. Doyouseean"OUTOF RANGE" message the screen? on Do you see a "CHECK SIGNAL CABLE" message screen? Do you on see a This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again. ? This message appears when the signal cable between your PC and your display is not connected. Check the the "OSD LOCKED" message Do you see "OSD LOCKED" when you push ? MENU button? ? You so they on cable and try again. the screen? the current control cannot be settings, inadvertently changed. unlock the OSD controls at any time pushing the MENU button for several You by can secure that signal can seconds: the message "OSD UNLOCKED" will appear. A17 Troubleshooting Display image Display is incorrect Position is ? incorrect. ? Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. On the screen ? vertical background, bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed. ? ? The screen mono or color is ? Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon the on screen display. Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display. Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). Check if the ? signal cable is properly connected screwdriver to fasten if necessary. Make sure the video card is properly inserted in and abnormal. in use a the slot. ? Set the color setting higher than Settings. at Control Panel The screen blinks. ? ? Check if the 24 bits (true color) - screen is set to interlace mode and if yes, change it to the recommend resolution. Make sure the power voltage is high enough, It has to be higher than AC100-240V 50/60Hz. A18 Troubleshooting Have you installed the Have you installed the display ? driver? display driver? Be display driver from the display (or diskette) that comes with your sure to install the driver CD display. Or, you can also download our web site: http://www.lge.com. Doyouseean "Unrecognized monitor, Plug&Play (VESA DDC) ? Make sure Plug&Play monitor found" message? A19 the driver from to check if the video card function. supports Specifications Display 17 inch 17 inches Anti-Glare Panel Active matrix-TFT LCD (43.2 cm) Flat coating 17 inches viewable 0.264 Sync Input Horizontal 30 Vertical 56 Input Video Input Freq. Freq. Form 15 Form Max DDC 2B Power 0n Mode Tilt Range Power Input D-Sub Connector Analog (0.7 Vp-p/ 30 : Mode 1024 x x 1024 75 ohm) @75 Hz @60 Hz W(Typ.) ≤1W ≤1W With Stand Dimensions Weight pin VESA 1280 Off Mode & (Automatic) (Automatic) VESA 1280 Plug&Play Sleep 83 kHz 75 Hz RGB Recommend Consumption - - Separate TTL, SOG (Sync On Green) Signal Input Input Resolution pixel pitch mm Without Stand Width 36.40 cm / 14.33 inches 36.40 cm / 14.33 inches Height Depth 37.80 cm / 14.88 inches 30.80 cm / 12.13 inches 18.00 cm / 7.09 inches 6.00 cm / Net 3.45 Tilt -5˚~20˚ 2.36 inches kg (7.61 lbs) AC 100-240V~50/60Hz 0.8A Environmental Conditions Operating Conditions Temperature 10˚C to 35 ˚C 10 % to 80 % non-Condensing Humidity Conditions Storage Temperature -20˚C to 60 ˚C 5 % to 90 % non-Condensing Humidity Stand Base Attached( ), Detached ( O ) Attached( ), Detached ( O ) Signal cable Power cord Wall-outlet type or PC-outlet type NOTE Information in this document is subject to change without A20 notice. Specifications Display 19 inch 19 inches Anti-Glare (48.19 cm) Flat coating Panel Active matrix-TFT LCD 19 inches viewable 0.294 Sync Input Input 30 Vertical 56 Freq. Freq. Form 15 Form Max DDC 2B Power 0n Mode Range Power Input D-Sub Connector Analog (0.7 Vp-p/ 33 : Mode 1024 x x 1024 75 ohm) @75 Hz @60 Hz W(Typ.) ≤1W ≤1W With Stand Dimensions Tilt pin VESA 1280 Off Mode &Weight (Automatic) (Automatic) VESA 1280 Plug&Play Sleep 83 kHz 75 Hz RGB Recommend Consumption - - Separate TTL, SOG (Sync On Green) Signal Input Input Resolution pixel pitch Horizontal Input Video mm Without Stand Width 41.80 cm / 16.46 inches 41.80 cm / 16.46 inches Height Depth 41.27 cm / 16.25 inches 34.30 cm / 13.50 inches 18.02 cm / 7.09 inches 5.92 cm / 2.33 inches Net 4.3 Tilt -5˚~20˚ kg (9.47 lbs) AC 100-240V~50/60Hz 0.8A Environmental Conditions Operating Conditions Temperature 10˚C to 35 ˚C 10 % to 80 % non-Condensing Humidity Conditions Storage Temperature -20˚C to 60 ˚C 5 % to 90 % non-Condensing Humidity Stand Base Attached( ), Detached ( O ) Attached( ), Detached ( O ) Signal cable Power cord Wall-outlet type or PC-outlet type NOTE Information in this document is subject to change without A21 notice. Preset Modes 1 2 3 4 5 6 7 8 9 10 11 *12 13 VGA VGA VGA VESA VESA VESA MAC VESA VESA MAC VESA VESA VESA (Resolution) 640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1280 x 1024 31.469 31.468 31.469 37.500 37.879 46.875 49.725 48.363 60.023 68.681 61.805 63.981 79.976 70 70 60 75 60 75 75 60 75 75 65 60 75 * Indicator On Mode Sleep Mode Off Mode Green or blue Amber Off Recommend Mode Installing the Wall mount plate This monitor satisfies the the 1. interchange Put a cushion or specifications of the Wall mount plate or device. soft cloth on a flat surface. 2. Place the monitor face down the cushion or soft cloth. on The Head part The Stand base part 3. Hold the product as it follows and lift up the Stand 4. Change your hold on the product direction until you hear a "click." 5. Pull out the Stand to as slightly. it follows and turn the Stand Base in the remove. A23 arrow Installing the Wall mount 6. Installing the wall mount plate plate Wall mount plate(Separate purchase) stnad-type or will mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate purchased. This is is Kensington Security Slot a locking cable that can be purchased separately at most Connected to computer A24 stores Digitally yours
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- 48.3 cm (19")
- 1280 x 1024 pixels
- 8 ms 300 cd/m² 1400:1
- 37 W
Related manuals
Frequently Answers and Questions
How to turn off the display?
Press the power button on the front panel to turn off the display.
How to adjust the display settings?
Press the AUTO/SET button to enter the On Screen Display(OSD) menu. Use the buttons on the front panel to select and adjust the desired settings.
How to clean the display screen?
Unplug the display before cleaning. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen.
How to prevent fire hazards?
Always turn off the display if you leave the room for more than a short period of time. Never leave the display ON when leaving the house. Keep children from dropping or pushing objects into the display's cabinet openings.
How to connect the display to a computer?
Connect the signal cable from the display to the graphics card on the computer. Connect the power cord from the display to a power outlet.
What to do if the display is not operating properly?
Contact the dealer or authorized service provider for assistance.