LG | F700P | LG F700P Owner’s Manual

User's Guide
F700P
Make
sure
to read the
Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached
dealer when you
on
the back cover and quote this information to your
require service.
Precautions
Important
This unit has been
engineered and manufactured to ensure your personal
safety, however improper use may result in potential eletrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this monitor, observe the following basic rules for its
installation, use, and servicing. Keep it in an accessible place for future
reference.
On
Use
Safety
only the power cord supplied
cord, make
with the unit. In
you use another power
national standards if not being
case
by the applicable
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
sure
that it is certified
The power supply cord is used as the main disconnect device. Ensure that the
socket-outlet is easily accessible after installation.
the monitor
Operate
this manual
or
listed
power source indicated in the specifications of
the monitor. If you are not sure what type of power supply
only from
on
a
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
technician for
plugs. They may
replacement.
Hands must be
Do not
It
sure
to
completely
a
the power
the power cord by
fire or electric shock.
damage
can cause
Make
dry when holding
result in
are
dangerous. So
shock
plug
or
are
fire hazard. Call your service
to avoid an electric shock.
disassembling, bending, pulling
insert the power
plug.
frayed power
or
Insecure connections
heating up.
can cause
fire.
Do not
Open
There
the Monitor.
serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the monitor is not operating properly.
are no user
To Avoid Personal
Do not
Use
place the
only a stand
Do not try to roll
Injury
:
monitor
sloping shelf unless properly secured.
recommended by the manufacturer.
a stand with small casters across thresholds or deep pile
on a
carpets.
A1
To Prevent Fire
or
Hazards:
the monitor OFF if you leave the room for more than
of time. Never leave the monitor ON when leaving the house.
Always turn
a
short
period
Keep children from dropping or pushing objects into the monitor's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this monitor.
During a lightning storm or when the monitor is to be left unattended for an
extended period of time, unplug it from the wall outlet.
Do not bring magnetic devices such as magnets or motors near the picture
tube.
On Installation
Do not allow
to rest upon or roll over the power
the monitor where the power cord is subject to damage.
Do not
use
anything
this monitor
sink, laundry tub, in
near
wet
water such as near a
basement,
cord, and do not place
bathtub, washbowl, kitchen
swimming pool.
Monitors are provided with ventilation openings in the cabinet to allow the
of heat generated during operation. If these openings are blocked, built-up
a
or near a
release
heat
failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the monitor on a bed, sofa, rug,
can cause
etc.
Place the monitor in
Cover the
openings
Place the monitor
built-in enclosure unless proper ventilation is
with cloth or other material.
a
near or over a
Do not install the monitor in
On
a
radiator
dusty
area.
It
heat
source.
can cause
fire.
Cleaning
Unplug the monitor before cleaning
Use a slightly damp (not wet) cloth.
monitor
On
or
provided.
screen
the face of the monitor
Do not
because overspray may
use an
cause
aerosol
screen.
directly on
the
electrical shock.
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
Connecting
the Monitor
Before
setting up the monitor, ensure that the power is turned off to the
monitor, computer system, and other attached devices.
Carefully set the monitor face-down with the underside facing you.
Connecting
the Tilt/Swivel stand
1. Align the hooks on the tilt/swivel stand with the matching slots in the base of
the monitor.
2.
3.
Insert the hooks into slots.
Slide the tilt/swivel stand toward the front of the monitor until the latches click
into the locked
position.
NOTE
This illustration depicts the general model of connection. Your monitor may differ from the
items shown in the picture.
Slot
Hook
Latch
AA3
Hook
Connecting
the Monitor
Using the Computer
1. Connect the signal cable. When mated, tighten the thumbscrews to secure the
connection.
2. Connect the power cord into a properly power outlet that is easily accessible and
close to the monitor.
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your monitor
may differ from the view as shown.
Signal Cable
Power Cord
Attached Type*
Wall-outlet
type*
Detached Type*
*
Varies according to model.
PC-outlet
type*
PC
MAC
Mac adapter
For Apple Macintosh use,
separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector
on the supplied cable to a 15 pin 2 row connector.
A4
a
Control Panel Functions
Front Panel Controls
Control
Function
Power Button
Use this button to turn the monitor
Power
This Indicator
on or
off.
lights up green when the monitor
operates normally. If the monitor is in DPM
(Energy Saving) mode, this indicator color changes
(DPMS)
Indicator
to amber.
MENU
Use this button to enter
(or OSD)
Button
on screen
display.
Buttons
Use these buttons to choose
the
SELECT
exit the
or
(or SET)
Button
on screen
items in
adjust
display.
Use this button to enter
screen
or
a
selection in the
on
display.
Control
Direct Access Function
/
Button
Bring
up
Contrast/Brightness adjustment
The Contrast and
Brightness functions are also available
On Screen Display (OSD) menu.
in the
CONTROLS LOCKED/UNLOCKED
:
CONTROLS LOCKED
CONTROLS UNLOCKED
MENU and
This function allows you to secure the current
control settings, so that they cannot be
inadvertently changed. Press and hold the MENU
button and
button for 5 seconds: the message
"CONTROLS LOCKED" appears.
unlock the OSD controls at any time by
button for 5
pushing the MENU button and
seconds:
The message "CONTROLS UNLOCKED" will
appear.
You
can
A5
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of
the monitor is quick and easy with the On Screen Display Control system. A
short example is quick and easy given below to familiarize you with the use of
the controls. The following section is an outline of the available adjustments
and selections you can make using the OSD.
NOTE
Allow the monitor to stabilize for at least 30 minutes before
To make
adjustments
in the On Screen
Display,
making image adjustments.
follow these steps:
Case 1
Case 2
Press the MENU
(or OSD) Button,
then the main
menu
of the OSD
appears.
To
access a
becomes
control,
highlighted,
Use the
Accept
the
Buttons. When the icon you want
press the SELECT (or SET) Button.
use
the
or
Buttons to
changes by pressing
Exit the OSD
by Pressing
adjust
the item to the desired level.
the SELECT
the MENU
A6
(or SET)
(or OSD)
Button.
Button.
On Screen
Display(OSD)
Selection and
The following table indicates all the On Screen
and setting menus.
Main
Sub
menu
BRIGHTNESS/
CONTRAST
POSITION
SIZE
Display control, adjustment,
Reference
menu
Brightness
To
Contrast
contrast of the
V Position
To
H Position
screen
V Size
To
adjust the
adjust the brightness
To
adjust the shape
and
screen
adjust the position
of the
size of the
screen
H Size
Tilt
SHAPE
Adjustment
of the
screen
Side Pincushion
S Pincushion Balance
Parallelogram
Trapezoid
H Corner
Top Corner
Bottom Corner
PRESET 6500K
To customize the color of the
9300K
COLOR
screen
Temp
R/G/B(User Color)
SETUP
Video Level
To customize the
Language
for
a
user's
screen
operating
status
environment
OSD Time
Degauss
SPECIAL
To
improve the clarity
stability of the screen
Recall
Reset
Moire
H Moire
V Moire
Convergence
Purity
:
A7
Adjustable
and
On Screen
Display(OSD)
Selection and
Adjustment
procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
You
were
introduced to the
NOTE
The order of icons may differ
To
depending
adjust the brightness and
OSD
on
the model
(A8~A11).
contrast of the
Adjust
screen
Description
Brightness
To adjust the brightness of the
Contrast
To adjust the contrast of the
To
adjust the position of the
OSD
screen.
screen
Adjust
Description
Vertical Position
To move image up and down.
Horizontal Position
To move image left and
A8
screen.
right.
On Screen
To
Display(OSD)
adjust the
OSD
Selection and
size of the
Adjustment
screen
Adjust
Description
Vertical Size
To
adjust image height.
Horizontal Size
To
To
adjust the shape of the
OSD
adjust image width.
screen
Adjust
Description
Tilt
To correct
image
rotation.
Side Pincushion
To correct
the
a concave or convex
bowing
of
image.
Side Pincushion Balance
To correct the balance of both sides
bowing.
Parallelogram
To correctly adjust the
skew of the
image.
Trapezoid
To correct
H
geometric distortion.
Corner*
Top Corner*
Bottom
Corner*
To correct
irregular distortion
displayed image.
*
This function is available for
designated models only.
A9
an
of the
On Screen
Display(OSD)
Selection and
To customize the color of the
OSD
Adjustment
screen
Adjust
Description
PRESET
6500K/ 9300K
Select the screen color.
6500K: Slightly reddish white.
9300K: Slightly bluish white.
?
?
Select the
TEMP
screen
prefer among
temperature which you
reddish
or
bluish
or
any color
in between.
RED
Set your
GREEN
BLUE
To customize the
OSD
screen
status for
a
user's
Adjust
own
color levels.
operating environment
Description
VIDEO LEVEL This item is used to select the monitor's
input signal level. The normal level used for
most PCs is 0.7V.
If the screen becomes suddenly washedout or blurred, please select 1.0V and try
again.
LANGUAGE To choose the language in which the
control names are displayed.
OSD Menus are available in 12 languages:
English, German, French, Spanish, Italian,
Swedish, Finnish, Portuguese, Korean,
Chinese, Russian and Polish.
OSD TIME
A10
Set the OSD time, i.e. the length of time a
menu will remain on-screen before it shuts
off automatically. Adjust the time to 5, 10,
20, 30 or 60 seconds.
On Screen
To
Display(OSD)
improve
OSD
the
Selection and
clarity
and
stability
Adjust
Adjustment
of the
screen
Description
DEGAUSS To manually demagnetize the screen to
avoid showing incorrect images or colors.
RECALL
You can use this function to reload the
modified parameters for screen display
operation, as specified by the user after
purchase: Position, Size, Side Pincushion,
Trapezoid (These recalled options may differ
depending on the mode selected: Preset,
User,
or
New).
If you don't want to recall the monitor to
these modified settings, use the
button
to select CANCEL and then press the
SELECT (or SET) button.
H
RESET
Return to all factory default settings
If you don't want to reset the monitor, use the
button to select CANCEL and then
press the SELECT (or SET) button.
MOIRE
This item allows you to reduce the degree of
moire. (Moire is caused by interference
Horizontal Scan Line with the periodical dot
screen). It is normally OFF(H:0/V:0).
The moire adjustments may affect the focus
of the screen.
Moire adjustments may shake slightly while
the moire reduction function is on.
CONVER- This is to adjust the
GENCE* and blue fields.
PURITY*
*
This function is available for
designated models only.
A11
alignment
Use to adjust the purity on the
if the color appears uneven.
of red
screen
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
monitor connected?
Is the power indicator light
on?
Is the power on and the
power indicator green?
Is the power indicator
amber?
Doyouseean"OUTOF
?
?
Press the Power button.
?
the brightness and the contrast.
?
If the monitor is in power saving mode, try moving the
mouse or pressing any key on the keyboard to bring up
the screen.
?
FREQUENCY" message
on the screen?
Doyouseea"SELF
?
DIAGNOSITICS" message
on the screen?
The
screen
is
Check and see if the power cord is connected properly to
the power outlet.
This message appears when the signal from the PC
(video card) is out of horizontal or vertical frequency range
of the monitor. See the 'Specifications' section of this
manual and configure your monitor again.
This message appears when the signal cable between
your PC and your monitor is not connected. Check the
signal cable and try again.
flickering.
Is the vertical frequency
less than 70Hz or is your
monitor set to the
interlaced mode?
Do you have any
magnetic material such
?
?
adapter, or highvoltage line near to your
Set the vertical frequency to 72Hz or higher, and
consult the video card user manual for instructions on
converting to a non-interlaced mode.
(You can set this option under the Display icon of the
Control Panel.)
Remove
magnetic sources, such as power adapters,
speakers, or high-voltage lines, away from the
monitor.
as
monitor?
Do you hear a "~ding"
sound while the monitor
is flickering?
?
Use the normal degaussing function. This function
clears the screen and reduces any screen blur that
may occur due to the surrounding magnetic field. The
screen may flicker for about 5 seconds, accompanied
by a "~ding"sound.
A12
Troubleshooting
The
screen
color is not normal.
Do you see basic
discoloration (16 colors)?
?
Is the screen color
unstable or monochrome?
Do you see black dots on
the screen?
?
?
Set the color depth to 256 colors or higher: use 'Control
Panel' ->'Display' ->'Settings' ->'Color Palette'
Check the connection of the signal cable. Or pull out the
video card of the PC and insert it again.
This is due to a small amount of foreign or abnormally
florescent material that became fastened on the mask
during manufacturing. It will not affect product
performance.
Do you see a partial
blurring on the screen?
I
see an
after-image
Do you see the afterimage even when you
turn off the monitor?
I
?
see waves on
the
Do you see the wave
directly on the screen?
on
?
This happens due to interference from surrounding
magnetic fields, as created when speakers, steel
structures, or high-voltage lines are placed near the
monitor. Remove any such materials from the immediate
vicinity and use the DEGAUSS icon on the screen
adjustment menu to fix the screen.
the
screen.
A premature aging of the monitor pixels may cause the
prolonged display of a single image on the screen. Be
sure to use a screen saver to maximize the service life of
the monitor.
screen.
?
This occurs in inverse proportion to the screen focus,
which can be caused by a particular frequency or video
card. Brighten the screen and use the 'MOIRE' icon on
the screen adjustment menu to adjust the screen.
Have you installed the monitor driver?
Have you installed the
monitor driver?
?
Be sure to install the monitor driver from the monitor driver
CD (or diskette) that comes with your monitor. Or, you
can also download the driver from our web site:
http://www.lge.com.
A13
Specifications
Picture Tube
17 inches (16.0 inches viewable) Perfect Flat Tube
90 degree deflection
0.24mm Slot pitch
W-ARAS(Wide Anti-Reflective Anti-Static)
Sync Input
Video Input
Resolution
Horizontal Freq.
Vertical Freq.
Input Form
30
50
-
-
coating
98kHz (Automatic)
160Hz (Automatic)
Separate TTL, Positive/Negative
CompositeTTL, Positive/Negative
15 pin D-Sub Connector
Signal Input
Input Form
Separate, RGB Analog, 0.7Vp-p/75 ohm,
VESA 1600
VESA 1280
Max Flicker Free
Recommend
Plug&Play
DDC 2B
Power
Normal
Consumption
Stand-by/Suspend
≤
Power Off
≤1W
x
x
1200@ 75Hz
1024@ 85Hz
83W
8W
Dimensions
Width
41.5
cm
/ 16.3 inches
&Weight
(with tilt/ swivel
stand)
Height
Depth
41.3
43.2
cm
/ 16.26 inches
/ 17.0 inches
Net
16.5 kg (36.41 lbs)
Power
Europe
AC 200-240V~50Hz 1.0A
Input
Positive
cm
Others
AC 100-240V~ 50/60Hz 2.0A
The products should be used according to the Power
requirements of each ID LABEL.
Environmental
Conditions
Operating Conditions
0˚C to 40 ˚C
Temperature
10 % to 90 % non-Condensing
Humidity
Storage Conditions
-20˚C to 60 ˚C
Temperature
5 % to 90 % non-Condensing
Humidity
Tilt/Swivel Stand
Attached(
Signal
cable
Power cord
), Detached ( O )
Attached( O ), Detached (
Wall-out type
or
)
PC-outlet type
NOTE
Information in this document is
subject to change without
A14
notice.
Specifications
Preset Modes
(Resolution)
Display Modes (Resolution)
1234
Horizontal
Freq. (kHz)
Vertical
Freq. (Hz)
VESA
640
x
480
43.269
85
VESA
800
x
600
53.674
85
VESA
1024
768
68.677
85
1024
91.146
85
VESA
1280
x
x
A15
Making
use
of USB
(Universal
USB (Universal Serial Bus) is
Serial
Bus) Option
-
innovation in
connecting your different
desktop peripherals conveniently to your computer. By using the USB, you will
be able to connect your mouse, keyboard, and other peripherals to your
monitor instead of having to connect them to your computer. This will give you
greater flexibility in setting up your system. USB allows you to connect a chain
of up to 120 devices on a single USB port; and you can "hot" plug (attach them
while the computer is running) or unplug them while maintaining the Plug and
the Plug auto detection and configuration. This monitor has an integrated BUSpowered USB hub, allowing up to 2 other USB devices to be attached it.
an
USB connection
1. Connect the upstream port of the monitor to the downstream port of the USB
compliant PC or another hub using the USB cable. (Computer must have a
USB port)
2. Connect the USB compliant peripherals to the downstream ports of the
monitor.
This is a simplified representation of the rear view.
USB downstream Ports
To USB downstream
connect the cables from USB
of the USB
compliant peripherals-such
keyboard, mouse, etc
or
port
compliant PC
another hub cable
NOTE
To activate the USB hub function, the monitor must be connected to
PC(OS) or another hub with the USB cable(enclosed).
When connecting the USB cable, check that the
matches the shape at the connecting side.
a
USB
compliant
shape of the connector at the cable side
Even if the monitor is in a power saving mode, USB compliant devices will function when
they are connected the USB ports(both the upstream and downstream) of the monitor.
A16
as
Making
use
USB
of USB
(Universal
Serial
Bus) Option
-
Specifications
USB standard
Downstream power supply
Communication speed
USB port
Rev. 1.1
complied BUS-powered hub
100mA for each (MAX)
12 Mbps (full), 1.5 Mbps (low)
1 Upstream port / 2 Downstream ports
IMPORTANT: These USB connectors are not designed for use with
such as a video camera, scanner, etc. LGE recommends connecting
directly to the computer
A17
high-power
high-power
USB devices
USB devices
Digitally yours
Download PDF

advertising