LG | L1960TQ-BF | LG L1960TQ-BF Owner’s Manual

User's Guide
L1760TQ
L1960TQ
L1760TG
L1960TG
L1760TR
L1960TR
L1960TC
Make
sure
to read the
Important Precautions before using the monitor.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached
on
the monitor and
dealer when you ask for service.
give the information to your
Precautions
Important
This unit has been
engineered and manufactured to ensure your personal
improper use may result in potential eletrical shock or fire
safety,
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
however
On
Use
Safety
only the power cord supplied
cord, make
that it is certified
sure
with the unit. In
by
the
you use another power
national standards if not being
case
applicable
If the power cable is faulty in any way, please contact the
the nearest authorized repair service provider for a replacement.
provided by the supplier.
manufacturer
or
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
technician for
plugs. They
replacement.
Do not
the
Open
may result in
are
a
dangerous. So
shock
or
are frayed power
fire hazard. Call your service
Display.
There
are no user
There
are
serviceable components inside.
Dangerous High Voltages inside, even when the power
Contact your dealer if the display is not operating properly.
is OFF.
To Avoid Personal
Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
To Prevent Fire
or
Hazards:
display OFF if you leave the room for more than a short period
display ON when leaving the house.
children
from
Keep
dropping or pushing objects into the display's cabinet
Some
internal
openings.
parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
Always
turn the
of time. Never leave the
A1
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not
the display where the power cord is subject to damage.
Do not
use
this
display
sink, laundry tub, in
a
near
wet
water such as near a
basement,
Displays are provided with ventilation
generated during operation. If
of heat
place
bathtub, washbowl, kitchen
swimming pool.
openings in the cabinet to allow the release
these openings are blocked, built-up heat
or near a
failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
can cause
Do not rub
mar, or
or
strike the Active Matrix LCD with anything hard
the Active Matrix LCD permanently.
Do not press the LCD
some
as
this may scratch,
damage
screen
with your
finger for a long
time
as
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If
possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On
Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly
screen because over-spraying may cause electrical shock.
On
on
the
display
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On
Disposal
The fluorescent lamp used in this monitor contains a small amount of mercury.
Do not dispose of this monitor with general household waste.
Disposal of this monitor must be carried out in accordance to the regulations of
your local authority.
the
Connecting
Display
Before
setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Attaching/Separating the stand
1. Place the
2. Make
monitor with its front
sure
facing
base
downward
on a
the stand base directs to the correct
soft cloth.
direction(Front, Rear) and turn the
device at the bottom to OPEN to assemble the unit. After
locking
locking
the
Turn the
device to LOCK before
locking
device to OPEN to
assembling
the unit, turn
use.
separate the stand base.
Stand Body
Stand Base
LOCK
OPEN
3. Once
assembled take the monitor up
carefully
and face the front side
4. After connecting the cable, adjust the angle of the panel
(To connect
Tilt
the cable,
Range
:
see
page A5 for
for easy
use.
reference.)
-5˚~20˚
Do not put your hand (finger)
between head section and stand section when
adjusting angle of screen.
Warning:
-5。
20。
Head section
Your hand
(finger) may get caught or wounded.
Ergonomic
It is recommended that in order to maintain
ergonomic and comfortable viewing
position, the forward tilt angle of the monitor
should not exceed 5 degrees.
an
Stand section
Important
This illustration
depicts the general
picture.
model of connection. Your monitor may differ from
the items shown in the
Once you connect the stand base, try not to disconnect it.
Do not carry the monitor upside down holding only the stand base. The monitor may
fall and get damaged or injure your foot.
A3
Connecting
the
To attach
1. To
Display
separate the back cap
or
attach the back cap, fix into the 3 holes first then slide it up to fit to the upper
groove.
Back
Cap
NOTE
-
Cover the back cap after connecting the cables before
(To
connect the
2. To separate
cable,
see
page A5 for
the back cap, hold the bottom
Kensington Security Slot
Connected to a locking
cable that can be purchased
separately
at most
computer
use.
reference.)
stores
A4
part and pull it
out.
Connecting
the
Display
Connecting with the PC
1.
Before
setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
2. Connect the signal cable 1 When attached, tighten the thumbscrews to secure the
.
connection.
3.
Connect the power cable 3 with the AC-DC
then
plug
adapter (AC-DC power supply)
2
,
and
the cable in the outlet.
NOTE
This is
of the
This
a
simplified representation
rear
rear
view.
view
represents
a
general model; your display
differ from the view
as
may
shown.
DVI-D
DC-IN
D-SUB
[ Arranging the cables]
3
Wall-outlet type
DVI-D
DC-IN
2
D-SUB
PC
PC-outlet type
1
PC
DVI-D(This feature is not available in all countries.)
PC
[ Connecting the cables]
MAC
Mac adapter
For Apple Macintosh use,
a
separate plug adapter is needed to change
the 15 pin high density (3 row) D-sub VGA connector on the supplied
cable to a 15 pin 2 row connector.
4.
Touch the power button
The 'Self
Image Setting
when the monitor is
on.
NOTE
Self Image Setting Function'?
'
in front to turn
on
the monitor.
Function' will
automatically
(Only Analog Mode)
optimal display settings.When the user
to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push
the 'SET/AUTO' button on the front panel of the monitor. Otherwise, you may execute the Factory reset' option on
the OSD adjustment menu. However, be aware that this option initializes all the menu items except 'Language'.
connects the monitor for the first
This function
provides the
run
user
with
time, this function automatically adjusts the display
'
A5
Control Panel Functions
Side
Front Panel Controls
MENU
SOURCE
Engine
SET/AUO
Control
Function
MENU Button
Use this button to enter
or
exit the On Screen
Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.
+
+
-
Buttons
Use these buttons to select
Screen
This feature is used when two
to the
(
adjust functions
Use this button to make D-Sub
Button
(SOURCE Hot key)
-
or
Button
For
)
in the On
Display.
display.
more
The default
setting
information, refer
A6
or
DVI connector active.
computers
are
is D-Sub.
to page A13.
connected
Control Panel Functions
Control
Function
SET/AUTO
Use this button to enter
Button
Display.
a
selection in the On Screen
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the SET/AUTO button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best
Power Button
Power Indicator
display
mode is
17 inch monitor
:
1280
x
1024
19 inch monitor
:
1280
x
1024
Touching
on
the
button for several seconds will
power up the unit and touching
several seconds will power off.
This Indicator
on
it
again
for
lights up green or blue when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes
to amber.
A7
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system.
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the
To make
display to
stabilize for at least 30 minutes before
adjustments
MENU
-
in the On Screen
+
Display,
To
access a
becomes
Use the
control,
use
highlighted,
-
/
+
follow these steps:
SET/AUTO
Press the MENU Button, then the main
the
-
or +
making image adjustments.
menu
-
+
MENU
of the OSD appears.
Buttons. When the icon you want
press the SET/AUTO Button.
Buttons to
adjust
the
image to
the desired level. Use the
SET/AUTO Button to select other sub-menu items.
Push the MENU Button
once
to return to the main menu to select another
function. Push the MENU Button twice to exit from the OSD.
A8
On Screen
The
and
Display(OSD) Selection
and
Adjustment
following table indicates all the On Screen Display control, adjustment,
setting menus.
Main
menu
PICTURE
Sub-menu
AD
Reference
BRIGHTNESS
To
CONTRAST
contrast and gamma of the
adjust the brightness,
screen
GAMMA
COLOR
PRESET
sRGB
To customize the color of
6500K
the
screen
9300K
RED
GREEN
BLUE
POSITION
TRACKING
HORIZONTAL
To
VERTICAL
screen
CLOCK
To
adjust the position
of the
improve the clarity and
stability, sharpness of the
PHASE
screen
SHARPNESS
SETUP
LANGUAGE
OSD
HORIZONTAL
To customize the
screen
status for
operating
a
user's
environment
POSITION VERTICAL
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
FLATRON
MOVIE / TEXT
F-ENGINE
USER
To select
desired
or
customize
image settings
NORMAL
:
A
:
D
:
Adjustable
Analog Input
Digital Input
NOTE
The order of icons may differ
depending
A9
on
the model
(A9~A13).
On Screen
Selection and
Display(OSD)
Adjustment
were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
You
Press the MENU
Button, then the main menu of the OSD appears.
PICTURE
Menu Name
Sub-menus
Icons
Button
Tip
MENU
-
+
SET
:
Exit
:
Adjust (Decrease/Increase)
:
Enter
:
Select another sub-menu
NOTE
OSD
(On
Screen
Display)
menu
languages
on
A10
the monitor may differ from the manual.
On Screen
Display(OSD)
Main
menu
Selection and
Sub
Adjustment
Description
menu
PICTURE
PICTURE
BRIGHTNESS
To
adjust
the
CONTRAST
To
adjust
the contrast of the
GAMMA
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
brightness
of the
screen.
screen.
display whitish images and low gamma
values display high contrast images.
MENU
-
:
:
Exit
Decrease
+ : Increase
SET : Select another sub-menu
COLOR
PRESET
COLOR
?
sRGB: Set the
screen
color to fit the
SRGB standard color
?
?
specification.
Slightly reddish white.
9300K: Slightly bluish white.
6500K:
RED
Set your
own
red color levels.
Set your
own
green color levels.
Set your
own
blue color levels.
GREEN
MENU
-
:
:
Exit
Decrease
BLUE
+ : Increase
SET : Select another sub-menu
POSITION
POSITION
MENU
-
:
:
HORIZONTAL
To
move
image
left and
VERTICAL
To
move
image
up and down.
Exit
Decrease
+ : Increase
SET : Select another sub-menu
A11
right.
On Screen
Display(OSD)
Main
Selection and
Sub
menu
Adjustment
Description
menu
TRACKING
CLOCK
TRACKING
To minimize any vertical bars or stripes
visible on the screen background.
The horizontal
screen
size will also
change.
PHASE
To
the focus of the
adjust
display.
This item allows you to remove any
horizontal noise and clear or sharpen
MENU
-
+
:
the
Exit
:
Decrease
:
Increase
SET
:
SHARPNESS To
of characters.
image
adjust
the clearness of the
screen.
Select another sub-menu
SETUP
LANGUAGE
To choose the
control
language in which
displayed.
the
names are
SETUP
OSD
POSITION
-
+
adjust position
on
the
If the
WHITE
BALANCE
MENU
To
the
of the OSD window
screen.
output of the video card is different
required specifications,
the color
level may deteriorate due to video
signal distortion. Using this function, the
SET
SETUP
signal
level is
standard
adjusted
output
in order to
to fit into the
level of the video card
provide
the
optimal image.
Activate this function when white and
black colors
MENU
-
+
SET
POWER
INDICATOR
MENU
-
+
:
:
SET
:
Exit
:
present in the
screen.
Use this function to set the power
indicator on the front side of the monitor
to ON
Adjust
Adjust
are
or
OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned
Select another sub-menu
FACTORY
Restore all factory default
"LANGUAGE."
RESET
settings except
Press the + button to reset
immediately.
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled
the input signal is an analog signal.
A12
on.
only when
On Screen
Display(OSD)
The OSD
right
screen
Selection and
Adjustment
will appear when you touch the
button
on
the
side of the monitor.
Menu Name
Icons
Sub-menu Name
FLATRON F-ENGINE
Screen when
applied
Screen when not
applied
When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear
on
the left side, whereas the
non-applied
will appear on the right side.Touch the SET
button to use the adjusted screen.
screen
Main
Sub
menu
MOVIE
TEXT
Description
menu
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
MOVIE: For animation
TEXT: For text
USER
adjust the USER sub-menu
function,
or
movies
User
can
You
can save or
...
Press the SET Button
...
USER
...
BRIGHTNESS
in videos
images (Word processing etc.)
You
when
To
images
manually adjust brightness, ACE or RCM.
restore the adjusted value even
using a different envir
(Brightness): Adjusts screen brightness.
ACE(Adaptive Clarity Enhancer): Selects the clarity mode.
RCM(Real Color Management): Selects the color mode.
0
Not
1
Green enhance
ACE
1
RCM
applied
2
Flesh tone
3
Color Enhance
2
SAVE
MENU
SET
Select the
and
save
SAVE
sub-menu
the YES value
NORMAL This is under normal
A13
using the SET button
using the buttons.
operating
conditions.
Troubleshooting
Check the
No
following before calling for service.
image appears
Is the power cord of the
display connected?
Is the power on and the
power indicator blue or
?
Check and
properly
?
see
if the power cord is connected
to the power outlet.
Adjust the brightness
and the contrast.
green?
Is the power indicator
amber?
?
If the
the
display
mouse or
is in power
saving mode, try moving
pressing any key on the keyboard to
bring up the screen.
?TrytoturnonthePC.
Doyouseean"OUTOF
RANGE" message
the screen?
Do you see a "CHECK
SIGNAL CABLE"
message
screen?
Do you
on
see a
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
?
This message appears when the signal cable
between your PC and your display is not
connected. Check the
the
"OSD LOCKED" message
Do you see "OSD
LOCKED" when you
push
?
on
MENU button?
?
You
so
they
on
cable and try
again.
the screen?
the current control
cannot be
settings,
inadvertently changed.
unlock the OSD controls at any time
pushing the MENU button for several
You
by
can secure
that
signal
can
seconds: the message
"OSD UNLOCKED" will appear.
A14
Troubleshooting
Display image
Display
is incorrect
Position is
?
incorrect.
?
Press the SET/AUTO button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
On the
screen
?
vertical
background,
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
?
?
The
screen
mono or
color is
?
Press the SET/AUTO button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon
the on screen display.
Press the SET/AUTO button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Check if the
?
signal cable
is
properly connected
screwdriver to fasten if necessary.
Make sure the video card is properly inserted in
and
abnormal.
in
use a
the slot.
?
Set the color
setting higher than
Settings.
at Control Panel
The
screen
blinks.
?
Check if the
24 bits
(true color)
-
screen
is set to interlace mode and if
it to the recommend resolution.
?
yes, change
Make sure the power voltage is high enough, It
has to be higher than AC100-240V 50/60Hz.
A15
Troubleshooting
Have you installed the
Have you installed the
display
?
driver?
display driver?
Be
sure
to install the
driver CD
display driver from the display
(or diskette) that comes with your
display. Or, you can also download
our web site: http://www.lge.com.
Doyouseean
"Unrecognized monitor,
Plug&Play (VESA DDC)
?
Make
sure
Plug&Play
monitor found"
message?
A16
the driver from
to check if the video card
function.
supports
Specifications
Display
17 inch
17 inches
Anti-Glare
Flat Panel Active matrix-TFT LCD
(43.2 cm)
coating
17 inches viewable
0.264
Sync Input
Horizontal
Vertical
Input
Video
Input
pixel pitch
mm
Analog
Digital :
Freq.
Form
15
30
-
-
83 kHz
71 kHz
Form
-
RGB
Max
D-Sub Connector
pin
DVI
Resolution
:
-
Signal Input
Input
30
(Automatic)
(Automatic)
56 75 Hz (Automatic)
Separate TTL, Positive/Negative
SOG (Sync On Green), Digital
Freq.
D connector
(Digital)
Analog (0.7 Vp-p/ 75 ohm), Digital
Analog
:
VESA 1280
Digital : VESA
Recommend
Plug&Play
DDC 2B
Power
On Mode
Consumption
Sleep
VESA 1280
30
:
Mode
x
1280
1024
x
x
@75 Hz
@60 Hz
1024
1024
@60 Hz
W(Typ.)
≤1W
Off Mode
≤1W
Dimensions
&Weight
[1]
(Height)
[2]
(Height)
ENU
MEU
SORE
SURE
E
E
ET
UO
(Width)
Width
ST
TO
(Depth)
(Width)
(Depth)
Height x Depth
[1] 39.21cm(15.44inches) x 39.10cm(15.39inches) x 22.60cm(8.90inches)
[2] 39.21cm(15.44inches) x 44.19cm(17.40inches) x 9.62cm(3.78inches)
Net
3.7 kg (8.16 lbs)
x
Tilt
Range
Power Input
Tilt
AC-DC
DVE. DSA-0421S-12 1
Adapter
Environmental
Conditions
Stand Base
Signal
cable
Power cord
12V
-5˚~20˚
3.0A
Operating Conditions
Temperature 10˚C to 35 ˚C
10 % to 80 % non-Condensing
Humidity
Conditions
Storage
Temperature -20˚C to 60 ˚C
5 % to 90 % non-Condensing
Humidity
Attached( ), Detached ( O )
Attached( O ), Detached (
)
Wall-outlet
type
or
PC-outlet
type
NOTE
Information in this document is
subject
to
change without
A17
notice.
Specifications
Display
19 inch
19 inches
Anti-Glare
(48.19 cm)
coating
Flat Panel Active matrix-TFT LCD
19 inches viewable
0.294
Sync Input
mm
Horizontal
Vertical
Input
Video
Input
pixel pitch
Analog
Digital :
Freq.
Form
15
30
-
-
83 kHz
71 kHz
Form
-
RGB
Max
D-Sub Connector
pin
DVI
Resolution
:
-
Signal Input
Input
30
(Automatic)
(Automatic)
56 75 Hz (Automatic)
Separate TTL, Positive/Negative
SOG (Sync On Green), Digital
Freq.
D connector
(Digital)
Analog (0.7 Vp-p/ 75 ohm), Digital
Analog
:
VESA 1280
Digital : VESA
Recommend
Plug&Play
DDC 2B
Power
On Mode
Consumption
Sleep
VESA 1280
35
:
Mode
x
1280
1024
x
x
@75 Hz
@60 Hz
1024
1024
@60 Hz
W(Typ.)
≤1W
Off Mode
≤1W
Dimensions
&Weight
[1]
(Height)
[2]
(Height)
MNU
EU
ORCE
SORE
E
E
ETUO
(Width)
Width
ET
TO
(Depth)
(Width)
(Depth)
Height x Depth
[1] 42.99cm(16.93inches) x 42.61cm(16.78inches) x 22.60cm(8.90inches)
[2] 42.99cm(16.93inches) x 47.86cm(18.84inches) x 9.71cm(3.82inches)
Tilt
Range
Power
Input
AC-DC
Adapter
Environmental
Conditions
Stand Base
Signal
cable
Power cord
x
Net
4.6
Tilt
-5˚~20˚
12V
kg (10.14 lbs)
3.0A
DVE. DSA-0421S-12 1
Operating Conditions
Temperature 10˚C to 35 ˚C
10 % to 80 % non-Condensing
Humidity
Conditions
Storage
Temperature -20˚C to 60 ˚C
5 % to 90 % non-Condensing
Humidity
Attached( ), Detached ( O )
Attached( O ), Detached ( )
Wall-outlet
type
or
PC-outlet
type
NOTE
Information in this document is
subject
to
change without
A18
notice.
Preset Modes (Resolution)
1
2
3
4
5
6
7
8
9
10
11
*12
**13
VGA
VGA
VGA
VESA
VESA
VESA
MAC
VESA
VESA
MAC
VESA
VESA
VESA
31.469
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.023
68.681
61.805
63.981
79.976
640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 1024
70
70
60
75
60
75
75
60
75
75
65
60
75
*
Recommend Mode
**
Indicator
On Mode
Sleep
Mode
Off Mode
green
or
blue
amber
Off
Only Analog
Mode
Specifications
Connector Pin
Signal
1
8
9
16
17
24
Assignment
DVI-D Connector
Pin
Pin
Signal(DVI-D)
1
T. M. D. S. Data2-
Signal(DVI-D)
16
Hot
2
T. M. D. S. Data2+
17
T. M. D. S. Data0-
3
T. M. D. S. Data2/4 Shield
18
T. M. D. S. Data0+
4
T. M. D. S. Data4-
19
T. M. D. S. Data0/5 Shield
5
T. M. D. S. Data4+
20
T. M. D. S. Data5-
6
DDC Clock
21
T. M. D. S. Data5+
22
T. M. D. S. Clock Shield
23
T. M. D. S. Clock+
24
T. M. D. S. Clock-
7
DDC Data
8
Analog
9
T. M. D. S. Data1-
10
T. M. D. S. Data1+
11
T. M. D. S. Data1/3 Shield
12
T. M. D. S. Data3-
13
T. M. D. S. Data3+
14
+5V Power
15
Ground (return for +5V,
H. Sync. and V. Sync.)
T. M. D. S.
Vertical
(Transition
Sync.
Minimized Differential
A20
Signaling)
Plug
Detect
Installing
the Wall mount
plate
This monitor satisfies the
specifications of the
Wall mount
plate
interchange
1. Place the monitor with its front facing downward on a soft cloth.
2. Separating the back cap
3. Press and hold on to the button on the right side of the stand body
the stand base in the direction of the
4.
or
device.
the
Install the Wall mount
arrow
plate.
Wall mount
plate(Separate purchase)
stnad-type or will mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount plate
purchased.
This is
A21
is
which it indicates.
and fold
Digitally yours
Download PDF