LG | L197WH-PF | LG L197WH-PF Owner’s Manual

User’s Guide
L197WH
L207WH
Make sure to read the Important Precautions before using this product.
Keep the User's Guide (CD) in an accessible place for future reference.
See the attached label on the unit and show this information to your dealer
when asking for service.
Important Precautions
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.
Do not Open the Display.
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys
or objects on the pro duct screen.
It can cause injury to human, problem to product and damage the display.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous. It can cause electric shock.
A1
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of
heat generated during operation. If these openings are blocked, built-up heat can
cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Main power breaker is the power cord and this breaking device must be located at
a location where it is easy to operate.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
A2
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off.
Unfolding the stand base
1. Place the monitor with its front facing downward on a soft cloth.
2. Hold the stand base and lift it up following the sequence as shown in the
picture.
3. Pull the stand base down at the same spot shown in the picture, and
the stand will be unfolded.
4. Place the monitor upright and adjust the stand
base to the desired angle. Adjust the stand
base's angle by holding the edges of the monitor
gently with both hands.
Important
This illustration depicts the typical connection procedure. Your monitor
may differ from the one displayed in the pictures above.
Do not touch or apply force to the monitor's screen while expanding or folding
the stand base.
A3
Connecting the Display
Folding the stand base
1.
Face the front of the monitor dislpay. Than gently push the monitor backwards,
following the sequence shown in the picture below.
Tilt range
1.
Make sure that the angle of the panel is set for your comfort.
Tilt Range : 0˚~30
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable viewing
position, the forward tilt angle of the monitor should not exceed 5 degrees
A4
Connecting the Display
To adjust the height
Scope of adjusting the height
-19 inch monitor : maximum 4.76 inches (121 mm)
121 mm
-20.1 inch monitor : maximum 4.7 inches (119.5 mm)
119.5 mm
A5
Connecting the Display
Using the Computer
1. Make sure to turn off the computer and
product. Connect the cable as below sketch map
form 1 to 2 .
A Connect DVI Cable
B Connect Dsub Cable (PC)
C Connect Dsub Cable (Mac)
NOTE
This is a simplified representation of the rear
view.
This rear view represents a general model;
your display may differ from the view as
shown.
Power Cord
1
2
Wall-outlet type
Signal Cable
Varies according to model.
DVI-D(This feature is not
available in all countries.)
PC-outlet type
PC
PC
MAC
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed
to change the 15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2 row connector.
2.
Press
button on the side switch panel to turn the
power on. When monitor power is turned on, the
'Self Image Setting Function' is executed automatically.
(Only Analog Mode)
NOTE
'Self Image Setting Function'? This function provides the user with optimal display settings.When the user connects
the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input
signals.
'AUTO/SET Function'? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen
while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution.
A6
Connecting the Display
To arrange the cables
1. Insert and screw the cable holder into the hole in the back of the stand until it will not
turn any more as shown in the following figure.
2. After connecting the cables neatly, arrange the cables to the Cable Holder as shown in
the following figure.
Cable Holder
A7
Control Panel Functions
Front Panel Controls
Bottom
6
Control
ZOOMING
Function
At the current display, Use 'ez Zooming' Key, then the display
resolution is transferred to the one step low resolution.
Use 'ez Zooming' Key one more, the display is back to the
original display.
*Only One touch of ez-zoom, you can fine the best resolution
you want and it is possible to magnify the size of characters and
pictures for the old not having good eye sight, housewives not
dealing with computer well and children.
The resolutions at which the EZ ZOOMING operates are as follows:
For the 19 inch monitor, 1440 x 900, 1280 x 1024, 1024 x 768, 800 x 600
For the 20.1 inch monitor, 1680 x 1050, 1440 x 900, 1280 x 1024, 1024 x 768, 800 x 600
The setting method can differ by O/S or video card. In this case, Please ask to the computer or
the video card manufacturer.
MENU Button
Use this button to enter or exit from the On Screen Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that these settings are not inadvertently
changed. To lock the OSD settings, press and hold the
MENU button for several seconds. The message "OSD
LOCKED" appears.
You can unlock the OSD settings at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" appears.
A8
Control Panel Functions
Control
Function
- + Buttons
- Button
(
)
+ SOURCE
(SOURCE Hot key)
AUTO/SET
Button
Use these buttons to select or adjust functions in the
On Screen Display.
For more information, refer to page A16.
Use this button to make either D-Sub or DVI
connector active. This feature is used when two
computers are connected to the display. The default
setting is D-Sub.
Use this button to selection an icon in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button prior to entering the On
Screen Display(OSD). This will automatically adjust
your display image to the ideal settings for the
current screen resolution size (display mode).
The best display mode is
19 inch monitor : 1440 x 900
20.1 inch monitor : 1680 x 1050
Power Button
Power Indicator
Use this button to turn the display on or off.
This Indicator lights up as blue when the display is
operating normally(On Mode). If the display is in
Sleep Mode (Energy Saving), this indicator color will
changes to amber.
A9
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the display's image size, position and operating
parameters is quick and easy with the On Screen Display Control
system(OSD). A short example is given below to familiarize you with the use
of the controls. The following section is an outline of the available
adjustments and selections you can make by using the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making any image
adjustments.
To make adjustments in the On Screen Display, follow these steps:
MENU
-+
AUTO/SET
-+
MENU
Press the MENU button, then the main menu of the OSD appears.
To select each item in the OSD menu, use the - or + button. When the
icon you want is highlighted, press the AUTO/SET Button.
Use the - / + buttons to adjust the image to the desired level. Use the
AUTO/SET button to select other sub-menu items.
Press the MENU button once to return to the main menu to select another
function. Press the MENU button twice to exit from the OSD.
A10
On Screen Display (OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
Main menu
PICTURE
Sub-menu
A
BRIGHTNESS
GAMMA
sRGB
6500K
9300K
PRESET
Reference
To adjust the brightness,
contrast and gamma of the
screen
CONTRAST
COLOR
D
To customize the color of
the screen
RED
GREEN
BLUE
HORIZONTAL
POSITION
To adjust the position of the
screen
VERTICAL
CLOCK
To improve the clarity and
stability of the screen
TRACKING PHASE
SHARPNESS
SETUP
LANGUAGE
OSD
To customize the screen
status for a user's operating
environment
HORIZONTAL
POSITION VERTICAL
WHITE BALANCE
POWER INDICATOR
4:3 IN WIDE
FLATRON
F-ENGINE
FACTORY RESET
MOVIE / TEXT
To select or customize
desired image settings
USER
NORMAL
: Adjustable
A : Analog Input
D : Digital Input
NOTE
The order of icons may differ depending on the model (A11~A16).
A11
On Screen Display (OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
PICTURE
Sub-menus
Icons
Button Tip
MENU
- +
SET
: Exit
: Adjust (Decrease/Increase)
: Enter
: Select another sub-menu
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
A12
On Screen Display (OSD) Selection and Adjustment
Main menu
Sub menu
Description
PICTURE
PICTURE
BRIGHTNESS
To adjust the brightness of the screen.
CONTRAST
To adjust the contrast of the screen.
GAMMA
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
MENU : Exit
- : Decrease
+ : Increase
SET : Select another sub-menu
COLOR
COLOR
PRESET
• sRGB: Set the screen color to fit the
SRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
RED
Set your own red color levels.
Set your own green color levels.
GREEN
MENU : Exit
- : Decrease
BLUE
+ : Increase
SET : Select another sub-menu
Set your own blue color levels.
A13
On Screen Display (OSD) Selection and Adjustment
Main menu
Sub menu
Description
POSITION
POSITION
HORIZONTAL
To move image left and right.
VERTICAL
To move image up and down.
MENU : Exit
- : Decrease
+ : Increase
SET : Select another sub-menu
TRACKING
TRACKING
CLOCK
To minimize any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
PHASE
To adjust the focus of the display.
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
MENU : Exit
- : Decrease
SHARPNESS To adjust the clearness of the screen.
+ : Increase
SET : Select another sub-menu
A14
On Screen Display (OSD) Selection and Adjustment
Main menu
Sub menu
Description
LANGUAGE
To choose the language in which the
control names are displayed.
OSD
POSITION
To adjust position of the OSD window
on the screen.
WHITE
BALANCE
If the output of the video card is different
the required specifications, the color level
may deteriorate due to video signal
distortion. Using this function, the signal
level is adjusted to fit into the standard
output level of the video card in order to
provide the optimal image.
Activate this function when white and
black colors are present in the screen.
POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
SETUP
SETUP
SETUP
MENU : Exit
- : Adjust
+ : Adjust
SET : Select another
sub-menu
4:3 IN WIDE To select the image size of the screen.
4:3
WIDE
4:3 : Depending on the input video signal ratio,
it is automatically changed to an optimized screen
ratio. (The 1280X1024 input signal is changed
to 5:4 ratio and 1024X768 to 4:3.)
Resolution
1280x1024
1152x864
1024x768
800x600
640x480
720x480
Screen ratio
5:4
4:3
4:3
4:3
4:3
3:2
The input signal which the 4:3 IN WIDE does not support '4:3'
is the following.
- The 19 inch monitor is 720x400,1280x768,1360x768,1440x900
- The 20.1 inch monitor is 720x400,1280x768,1360x768,1680x1050
FACTORY
RESET
Restore all factory default settings except
"LANGUAGE."
Press the - button to reset immediately.
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal.
A15
On Screen Display (OSD) Selection and Adjustment
The OSD screen will appear when you touch the
(-) button
on the front of the monitor.
Menu Name
Icons
Sub-menu Name
FLATRON F-ENGINE
Screen when applied
Screen when not applied
When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear on the left side, whereas the non-applied
screen will appear on the right side.Touch the SET
button to use the adjusted screen.
Main menu
Sub menu
Description
MOVIE This feature lets you easily select the best desired
TEXT image condition optimized to the environment
(ambient illumination, image types etc).
MOVIE: For animation images in videos or movies
TEXT: For text images (Word processing etc.)
MENU : Exit
- , + : Move
SET : Select
USER
To adjust the USER sub-menu function,
Press the SET Button
User
You can manually adjust brightness, ACE or RCM.
You can save or restore the adjusted value even
when using a different environment.
...
(Brightness): Adjusts screen brightness.
...ACE(Adaptive Clarity Enhancer): Selects the clarity mode.
...RCM(Real Color Management): Selects the color mode.
0
1
2
3
Not applied
Green enhance
Flesh tone
Color Enhance
Select the SAVE sub-menu using the SET button
MENU : Exit
and save the YES value using the buttons.
- : Decrease
+ : Increase
SET : Select another sub-menu
NORMAL This is under normal operating conditions.
A16
Troubleshooting
Check the following before calling for service.
No image appears
● Is the power cord of the • Check and see if the power cord is connected
properly to the power outlet.
display connected?
● Is the power on and the • Adjust the brightness and the contrast.
power indicator blue or
green?
● Is the power indicator
amber?
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
● Do you see an "OUT OF • This message appears when the signal from the
PC (video card) is out of horizontal or vertical
RANGE" message on
frequency range of the display. See the
the screen?
'Specifications' section of this manual and
configure your display again.
● Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
Do you see a "OSD LOCKED" message on the screen?
● Do you see “OSD
LOCKED” when you
push MENU button?
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENU button for several
seconds: the message
“OSD UNLOCKED” will appear.
A17
Troubleshooting
Display image is incorrect
● Display Position is
incorrect.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
● On the screen
background, vertical
bars or stripes are
visible.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
● Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Important
Check Control Panel --> Display --> Settings and see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
Reasons for Recommending Optimal Resolution : The aspect ratio is 16:10.
If the input resolution is not 16:10 (for instance, 16:9, 5:4, 4:3), you might encounter
problems such as blurred letters, blurry screen, cut-off screen display or tilted
screen.
The setting method can differ by computer and O/S (Operation System),
and resolution mentioned above may not be supported by the video card
performance. In this case, please ask to the computer or the video card
manufacturer.
A18
Troubleshooting
Display image is incorrect
● The screen color is
mono or abnormal.
• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
● The screen blinks.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Have you installed the display driver?
● Have you installed the
display driver?
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
● Do you see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
• Make sure to check if the video card supports
Plug&Play function.
A19
Specifications
19 inch
Display
19 inches (48.14 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
19 inches viewable
0.294 mm pixel pitch
Sync Input
Horizontal Freq.
Vertical Freq.
Input Form
Video Input
Signal Input
Input Form
Resolution
Max
Recommend
Plug&Play
DDC 2B
Power
Consumption
On Mode
Sleep Mode
Off Mode
Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 83 kHz (Automatic)
56 - 75 Hz (Automatic)
Separate TTL
SOG (Sync On Green), Digital(HDCP)
15 pin D-Sub Connector
DVI - D connector (Digital)
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Analog : VESA 1440 x 900 @75 Hz
Digital : VESA 1440 x 900 @60 Hz
VESA 1440 x 900 @60 Hz
:
≤
≤
36 W(Typ.)
1W
1W
Dimensions
&Weight
(Height)
(Width)
(Depth)
(Height)
(Width)
(Depth)
Width x Height x Depth
[1] 43.96 cm(17.31 inches) x 43.60 cm(16.95 inches) x 23.74 cm(9.35 inches)
[2] 43.96 cm(17.31 inches) x 29.56 cm(11.64 inches) x 9.82 cm(3.86 inches)
Net
5.7 kg (12.57 lbs)
Tilt/Height Range
Tilt range
Height range
Power Input
AC 100-240V~ 50/60Hz 0.8A
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Environmental
Conditions
Stand Base
Power cord
0˚~30˚
121 mm / 4.76 inches
Attached ( O ), Detached ( )
Wall-outlet type or PC-outlet type
NOTE
Information in this document is subject to change without notice.
A20
Specifications
20.1 inch
Display
20.1 inches (51.113 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
20.1 inches viewable
0.258 mm pixel pitch
Sync Input
Horizontal Freq.
Vertical Freq.
Input Form
Video Input
Signal Input
Input Form
Resolution
Max
Recommend
Plug&Play
DDC 2B
Power
Consumption
On Mode
Sleep Mode
Off Mode
Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 83 kHz (Automatic)
56 - 75 Hz (Automatic)
Separate TTL
SOG (Sync On Green), Digital(HDCP)
15 pin D-Sub Connector
DVI - D connector (Digital)
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Analog : VESA 1680 x 1050 @60 Hz
Digital : VESA 1680 x 1050 @60 Hz
VESA 1680 x 1050 @60 Hz
:
≤
≤
40 W(Typ.)
1W
1W
Dimensions
&Weight
(Height)
(Width)
(Depth)
(Height)
(Width)
(Depth)
Width x Height x Depth
[1] 47.18 cm(18.57 inches) x 44.82 cm(17.65 inches) x 23.74 cm(9.35 inches)
[2] 47.18 cm(18.57 inches) x 31.47 cm(12.39 inches) x 9.91 cm(3.90 inches)
Net
5.3 kg (11.68 lbs)
Tilt/Height Range
Tilt range
Height range
Power Input
AC 100-240V~ 50/60Hz 1.0A
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Environmental
Conditions
Stand Base
Power cord
0˚~30˚
119.5 mm / 4.7 inches
Attached ( O ), Detached ( )
Wall-outlet type or PC-outlet type
NOTE
Information in this document is subject to change without notice.
A21
Specifications
Preset Modes (Resolution)
19 inch monitor
Display Modes (Resolution)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
*15
**16
Horizontal Freq. (kHz)
640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 1024
1440 x 900
1440 x 900
1440 x 900
31.469
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.123
68.681
61.805
63.981
79.976
55.500
55.935
70.635
Vertical Freq. (Hz)
70
70
60
75
60
75
75
60
75
75
65
60
75
60
60
75
*Recommend Mode
**Only Analog Mode
20.1 inch monitor
Display Modes (Resolution)
1
2
3
4
5
6
7
8
9
10
11
*12
Horizontal Freq. (kHz)
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1680 x 1050
31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
64.674
65.290
Vertical Freq. (Hz)
70
60
75
60
75
60
75
75
60
75
60
60
*Recommend Mode
Indicator
MODE
On Mode
Sleep Mode
Off Mode
LED Color
blue
amber
Off
A22
Specifications
Signal Connector Pin Assignment
8
16
24
1
9
17
DVI-D Connector
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Signal(DVI-D)
Pin
16
17
18
19
20
21
22
23
24
T. M. D. S. Data2T. M. D. S. Data2+
T. M. D. S. Data2/4 Shield
T. M. D. S. Data4T. M. D. S. Data4+
DDC Clock
DDC Data
Analog Vertical Sync.
T. M. D. S. Data1T. M. D. S. Data1+
T. M. D. S. Data1/3 Shield
T. M. D. S. Data3T. M. D. S. Data3+
+5V Power
Ground (return for +5V,
Signal(DVI-D)
Hot Plug Detect
T. M. D. S. Data0T. M. D. S. Data0+
T. M. D. S. Data0/5 Shield
T. M. D. S. Data5T. M. D. S. Data5+
T. M. D. S. Clock Shield
T. M. D. S. Clock+
T. M. D. S. Clock-
H. Sync. and V. Sync.)
T. M. D. S. (Transition Minimized Differential Signaling)
A23
Installing the Wall mount plate
This monitor satisfies the specifications of the Wall mount plate or the
interchange device.
1. Place
the monitor with its front facing downward on a soft cloth or a cushion.
Gently hold Cover Hinge Cap with hands as shown in the picture. Then, lift it up and
separate from the body.
1
2 1
2
1
2
Cover Hinge Cap
2.
Separate the stand base by using a screwdriver.
3.
Install the Wall mount plate.
Wall mount plate(Separate purchase)
This is stand-type or wall mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more details,
which is provided when Wall mount plate is purchased.
A24
Installing the Wall mount plate
Kensington Security Slot
Connected to a locking cable that can be purchased separately at most
computer stores.
A25
Digitally yours
Download PDF

advertising