LG | M197WA-PT | LG M197WA-PT Owner’s Manual

User’s Guide
M197WA
Make sure to read the Safety Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached on the product and give the information to your dealer when you ask for
service.
Before Connecting to the PC
Stand Installation
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off.
1
Carefully place the product screen side
down on a cushioned surface that will
protect product and screen from damage.
2
Insert the stand base into the product
3
Attach the monitor to the Stand Base
by turning the screw to the right.
* Turn the screw by using the screw
handle
Screw
1
Before Connecting to the PC
Detaching Stand
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off.
1
Place the set screen side down on a
cushion or soft cloth.
2
Detach the monitor to the Stand
Base by turning the screw to the left.
3
Turn the screw by using the screw handle
4
Pull the stand base.
5
2
Before Connecting to the PC
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off.
Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range
-6° ~ -2°
12°~ 18°
Warning:
When adjusting the angle of the screen, do not put
your finger(s) in between the head of the monitor
and the stand body. You can hurt your finger(s).
Theft prevention locking device
Locking Device
Use this locking cable (This has to be purchased
separately if required.) to prevent theft.
3
Before Connecting to the PC
WALL MOUNT:HORIZONTAL INSTALLATION
For proper ventilation,allow a clearance of 4 inches on each side and from the wall. Detailed installation
instructions are available from your dealer,see the optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
4 inches
4 inches
4 inches
4 inches
4 inches
4
Name and Function of the Parts
Name of the Remote Control Buttons
TV/PC : Selects TV or PC mode.
Switches the set on.
POWER
TV/PC
INPUT
POWER
INPUT
MUTE
PSM
SSM
I/II
Input
Each time you press the Input button it will
change to
TV
AV
Component
RGB
DVI
HDMI
If nothing is inputted for several seconds the
screen will automatically move to the
selected menu.
TV
AV
Component
RGB
DVI
HDMI
OK
LIST
Q.VIEW
MUTE
PR
VOL
OK
Switches the sound on or off.
VOL
PSM (Picture Status Memory) Button
Press repeatedly to select Dynamic, Standard, Mild, Game or User
picture mode.
PR
SSM (Sound Status Memory) Button
Use this button to select the sound tone.
Press repeatedly to select Flat, Music, Movie, Sports, User sound tone.
NOTE : In case of weak
stereo sound signals, with
stereo or Nicam stereo
transmission, select mono
reception.
Number buttons
Able to directly select and change channel.
Inserting batteries into remote control.
1. Take out the battery cap.
2. Insert the batteries with correct polarity (+/-).
3. Close the battery cap.
• Dispose of used batteries in the recycle bin to prevent
environmental pollution.
AAA Type
5
Name and Function of the Parts
Name of the Remote Control Buttons
I/II : Bilingual choice and sound mode selection
[TV]
TV/PC
MUTE
POWER
PSM
INPUT
SSM
I/II
To switch from Stereo to Mono sound in case of stereo transmission,
or from Nicam Stereo to Nicam Mono, in case of digital transmission.
to switch from Nicam Dual I to Nicam Dual II or Nicam Dual I+II in
case of Nicam Dual transmission.
to choose between Dual I, Dual II or Dual I+II in case of bilingual
transmission :
Dual I sends the primary broadcast language to the loudspeakers ;
Dual II sends the secondary broadcast language to the loudspeakers ;
Dual I+II sends a separate language to each loudspeakers.
[AV / Component]
LIST
Q.VIEW
PR
VOL
OK
VOL
In AV/Component mode, you can select output sound for the left and
right loudspeakers. Repeatedly press the I/II button to
select the sound output.
L+R : Audio signal from audio L input is sent to left
loud-speaker and audio signal from audio R input is
sent to right loud-speaker.
L+L : Audio signal from audio L input is sent to left and right
loud-speakers.
R+R : Audio signal from audio R input is sent to left and
right loud-speakers.
PR
LIST : Programme list
To display the programme list (0~ 99).
Programme List
0
1
2
3
4
C
C
C
C
C
01
35
05
11
04
5
6
7
8
9
C
C
C
C
C
07
50
51
41
63
OK MENU
Note: TV channels displayed in blue have been setup
to be skipped in the Programme Edit menu.
Q.VIEW : QUICK VIEW Button
To display the previously selected TV channel
6
Name and Function of the Parts
Name of the Remote Control Buttons
(Depends on the country the remote control can be provided different.)
PR (
) Buttons
Able to change channel.
PR
OK
VOL
VOL
PR
MENU
SLEEP
ARC/
*
*
PR
VOL (
) Buttons
Able to adjust sound.
OK Button
Use when functional adjustment is completed.
Double press the OK button, then Auto Config.
(Only RGB input)
MENU
Use this button to enter the On Screen Display
menu.
SLEEP : SLEEP Timer
You can set a time period after which the
TV / AV / RGB / Component / DVI / HDMI
should switch itself to standby. Press the key
repeatedly to select the number of minutes.
_ _ _ (off)
240
OK
VOL
10
20
30
180
120
90
60
ARC/*
To select the image size of the screen.
• When TV / AV mode: Spectacle, Original, 4:3, 16:9, 14:9,
Zoom1, Zoom2
• When RGB/DVI/HDMI/Component mode: 4:3, 16:9
7
VOL
PR
SLEEP
MENU
HOLD
REVEAL
ARC/
MIX
SIZE
?
INDEX
*
i
MODE
TEXT
TIME
M
UPDATE
X
Name and Function of the Parts
Remote Control - Using the Teletext function
If you don't, the teletext may not appear correctly on the screen.
TEXT
LIST
Q.VIEW
To select the teletext on or off. The main index
page or the last selected page appears on the
screen together with an information headline and
an option line at the bottom of the screen.
PR
OK
VOL
VOL
Yellow key
Favourite Program On : Rotate favourite channel
Favourite Program Off : To display the previously
selected TV channel.
PR
SLEEP
MENU
ARC/
*
TEXT
HOLD
HOLD
REVEAL
SIZE
?
INDEX
i
MIX
TIME
MODE
UPDATE
M
X
Press the button to stop the automatically rotating
of the sub pages. Press the button again to
continue the automatic rotating again.
SIZE
Press the button repeatedly to display the upper
part, the lower part and then to return to the
normal page size.
MIX
Display the teletext pages superimposed on
the TV picture. To switch the TV picture off
press this button again.
TIME
Press this button to select a sub page number.
The sub page number is displayed at the
bottom of the screen. To hold or change the
sub page, press the RED/GREEN,
or
NUMBER buttons. Press again to exit this
function.
8
Name and Function of the Parts
Remote Control - Using the Teletext function
SLEEP
MENU
HOLD
REVEAL
ARC/
MIX
SIZE
?
INDEX
*
i
MODE
TEXT
REVEAL
Press the button to reveal/conceal the hidden
information, such as solutions to riddles and
puzzles. Press this button again to remove the
information from the display.
TIME
M
UPDATE
X
INDEX
To display the main index.
MODE
The mode will be switched in the Teletext mode.
UPDATE
Press the button to appear the TV programme.
At the top of screen indicates that you are still in the
teletext mode. Before interrupting teletext, you may
select a page number. When the page has been
found, the information line appears briefly on your
screen. Press the button again to reappear teletext.
9
Name and Function of the Parts
Rear View
AC IN
AC IN
COMPONENT
IN
AUDIO IN
(RGB/DVI)
AV IN
Y
AC IN
S-VIDEO
HDMI IN
VIDEO
PB
VIDEO
PR
L
ANTENNA/
CABLE IN
AUDIO R
R
AUDIO
RGB IN (PC)
(MONO) L
DVI-D IN (PC)
AC IN
Power Connector : Connect the power cord.
AV Input Terminal
HDMI Digital Signal Connector
DVI Digital Signal Connector
RGB, DVI Sound Jack : Connect to the jack in
the PC sound card.
D-Sub Analog Signal Connector
TV Tuner Jack : Connect the antenna.
Component Input Terminal
10
AC IN
Name and Function of the Parts
AV Input Terminal
S-VIDEO
S-Video Input Terminal
VIDEO
Video Input Terminal
(MONO) L
AUDIO R
Audio Input Terminal
11
Connecting to External Devices
Connecting to your PC
1.
First of all, see if the computer, product and the peripherals are turned off.
Then, connect the signal input cable.
Rear side of the product.
COMPONENT
IN
AUDIO IN
(RGB/DVI)
AV IN
Y
S-VIDEO
VIDEO
PB
HDMI
VIDEO
PR
AC IN
ANTENNA/
CABLE IN
AUDIO R
A
L
R
AUDIO
RGB IN (PC)
(MONO) L
DVI-D IN (PC)
Connecting with the D-Sub signal input cable.
AC IN
RGB IN (PC)
Rear side of the product.
Macintosh Adapter (Not included)
Use the standard Macintosh adapter since an
incompatible adapter is available in the market.
(Different signaling system)
B
Connecting with the DVI signal input cable.
DVI-D IN (PC)
Rear side of the product.
2.
Connect the audio cable.
Audio cable
AUDIO IN
(RGB/DVI)
Rear side of the product.
• Make sure to check the sound card connection terminal in the PC before connecting to the product.
If the PC sound card supports both Speaker Out and Line Out, change it to Line Out by setting the jumper
or the PC application. (For more details, refer to the sound card user’s guide.)
- Speaker Out : The terminal connected to the speaker that is not equipped with an amplifier.
- *Line Out : The terminal connected to the speaker equipped with an amplifier.
If Audio Out in the PC sound card has only Speaker Out, reduce the PC volume. This product is integrated
with an amplifier.
12
Connecting to External Devices
3.
Rear side of the product.
Connect the power cord.
COMPONENT
IN
AUDIO IN
(RGB/DVI)
AV IN
Y
S-VIDEO
VIDEO
PB
HDMI
VIDEO
PR
AC IN
R
Turn on power by pressing the
power button on the product.
ANTENNA/
CABLE IN
AUDIO R
4. 1
L
AUDIO
RGB IN (PC)
(MONO) L
DVI-D IN (PC)
Power button
AC IN
2 Turn on the PC.
5.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
OK
Or, press the INPUT button at the top side of the product.
INPUT
A
OK
• Select RGB
Input
B
• Select DVI
Input
TV
AV
Component
RGB
DVI
HDMI
TV
AV
Component
RGB
DVI
HDMI
OK
OK
Each time you press the Input button it will change to TV
AV
Component
RGB
DVI
HDMI
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
PC Mode – Preset Mode
Preset mode
1
2
3
4
5
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
Note
Horizontal
Frequency
(kHz)
31.468
31.469
37.500
37.879
46.875
Vertical
Frequency
(Hz)
Preset mode
70
60
75
60
75
6
7
8
9
10
1024 x 768
1024 x 768
1280 x 768
1360 x 768
1366 x 768
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
48.363
60.123
47.776
47.712
47.7
• Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.
13
60
75
60
60
60
Connecting to External Devices
Connecting to VCR/DVD
1.
Connect the video/audio cable as shown in the figure below and then connect the power
cord (See page 13).
A When using the RCA cable.
• Connect the input terminal with a proper colour match.
VCR/DVD
Rear side of the Product
RCA Cable
(Not included)
VIDEO
OUT
VIDEO (MONO) L AUDIO R
AUDIO
OUT
S-VIDEO
B When using the S-Video cable.
• Connect to the S-Video input terminal to watch high image quality movies.
VCR/DVD
Rear side of the Product
VIDEO
OUT
Note
S-Video Cable
(Not included)
RCA Cable
(Not included)
VIDEO (MONO) L AUDIO R
AUDIO
OUT
S-VIDEO
• In case the RCA cable is connected simultaneously as S-Video cable is connected, S-Video cable is first.
14
Connecting to External Devices
2.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
OK
Or, press the INPUT button at the top side of the product.
INPUT
OK
A
When connecting with a RCA cable.
• Select AV
B
When connecting with a S-Video cable.
• Select AV
Input
TV
AV
Component
RGB
DVI
HDMI
OK
Each time you press the Input button it will change to TV
AV
Component
RGB
DVI
HDMI
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
15
Connecting to External Devices
Connecting to Set-top Box /DVD (480p/576p/720p/1080i/480i/576i)
1.
Connect the video/audio cable as shown in the figure below and then connect the power
cord (See page 13).
• Connect the input terminal with a proper colour match.
Rear side of the Product
Set-top Box /DVD
COMPONENT
IN
Y
Component Cable
(Not included)
Y
Pb
PR
Pr
VIDEO
COMPONENT IN
L
AUDIO
R
AUDIO
L
Audio Cable
(Not included)
R
2.
VIDEO
PB
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
OK
Or, press the INPUT button at the top side of the product.
INPUT
OK
• Select Component
Input
TV
AV
Component
RGB
DVI
HDMI
OK
Each time you press the Input button it will change to TV
AV
Component
RGB
DVI
HDMI
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
16
Connecting to External Devices
When watching HDMI from the DVD/Set-top Box
1.
Connect the HDMI cable as shown in the below figure and then connect the power
cord. (see page 13)
[Rear side of the Product]
[Rear side of the Product]
AUDIO IN
(RGB/DVI)
HDMI IN
HDMI IN
RCA Stereo cable
(not included)
HDMI to DVI cable
(not included)
HDMI cable
(not included)
AUDIO
DVI OUTPUT
L
R
HDMI OUTPUT
[Set-top Box/DVD]
2.
[Set-top Box/DVD]
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
OK
Input
Or, press the INPUT button at the top side of the product.
INPUT
• Select HDMI
OK
Each time you press the Input button it will change to TV
AV
Component
RGB
DVI
HDMI.
If nothing is inputted for several seconds the screen will automatically
move to the selected menu.
TV
AV
Component
RGB
DVI
HDMI
OK
DTV -Timming
1
2
3
4
5
Preset mode
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
720 x 480/60p
720 x 480/60p
720 x 576/50p
1280 x 720/50p
1280 x 720/60p
31.47
31.5
31.25
37.5
44.96
60
60
50
50
60
6
7
8
9
Preset mode
Horizontal
Frequency
(kHz)
1280 x 720/60p
1920 x 1080/60i
1920 x 1080/60i
1920 x 1080/50i
45
33.72
33.75
28.125
Vertical
Frequency
(Hz)
60
60
60
50
Note
• HDMI Input does not support PC mode.If it is connected PC,the screen may not be displayed properly.
17
Connecting to External Devices
When Watching TV
1.
Check if the antenna cable is connected at the rear side of the product and then, connect
the power cord.
Rear Side of the Product
COMPONENT
IN
AUDIO IN
(RGB/DVI)
AV IN
Y
S-VIDEO
VIDEO
PB
HDMI
VIDEO
PR
AC IN
L
ANTENNA/
CABLE IN
AUDIO R
AUDIO
R
RGB IN (PC)
(MONO) L
DVI-D IN (PC)
ANTENNA/
CABLE IN
Antenna Cable
(Not included.)
2.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
OK
Or, press the INPUT button at the top side of the product.
INPUT
OK
Input
• Select TV
TV
AV
Component
RGB
DVI
HDMI
OK
Each time you press the Input button it will change to TV
AV
Component
RGB
DVI
HDMI
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
18
To arrange cables using cable management
1. Tie cables together with a cable management as shown in the illustration.
Cable management
19
Adjusting the Screen
Name of the Buttons in the Screen Adjustment Unit
INPUT
MENU
OK
VOL
PR
Power Indicator
Power Button
OSD Select/Adjust Button
• This Indicator lights up blue when the display operates normally
(On Mode). If the display is in Sleep (Energy Saving) Mode, this
indicator colour changes to amber.
• Use this button to turn the product on and off.
• Use this button to select an icon or adjust the setting in the OSD screen.
• Use this button to control the channel for the TV signal.
• Adjust the volume.
OK Button
Volume
30
• OK button is usually used in choosing the MENU.
When there is no MENU on the screen pushing the OK button will
give the information about the current input source.
20
Adjusting the Screen
Name of the Buttons in the Screen Adjustment Unit
MENU Button
• Use this button to show/hide the OSD (On Screen Display) menu
screen.
INPUT Button
TV
AV
Component
RGB
DVI
HDMI
Input
Television
CVBS, S-Video
HDTV, DVD
D-Sub analog signal
DVI Digital signal
HDMI Digital signal
TV
AV
Component
RGB
DVI
HDMI
OK
Each time you press the Input button it will change to TV
AV
Component
RGB
DVI
HDMI
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
21
Adjusting the Screen
OSD (On Screen Display) Menu
Icon
Function Description
Set/Select the channel when using the TV
Station
Adjusting the picture function.
Picture
Adjusting the sound function.
Sound
Adjusting the time function.
Time
Selecting the special function.
Special
Adjusting the screen function.
Screen
Note
OSD(On Screen Display)
The OSD function enables you to adjust the screen status conveniently since it provides graphical
presentation.
22
Adjusting the Screen
OSD (On Screen Display) Screen Tracking Order
PR
PR
MENU
VOL
OK
VOL
VOL
OK
VOL
OK
MENU
PR
PR
Pop up the
menu screen
OK
Move where
you want to
adjust
Select a menu icon
Adjust the status
Save
adjustment
Exit from the
menu screen.
• Use the remote control to adjust the OSD screen.
1
Press the MENU Button, then the main menu of the OSD will appear.
2
To access a control, use the
3
When the icon you want becomes highlighted, press the OK Button.
4
Use the
5
Accept the changes by pressing the OK Button.
6
Exit the OSD by pressing the MENU Button repeatedly .
Buttons.
Buttons to adjust the item to the desired level.
23
Adjusting the Screen
STATION ID set/Select the channel when using the TV
Auto programme
Station
Auto programme
Manual programme
Programme edit
Favourite programme
To set
OK MENU
System
It should be set before run auto searching.
Press the
buttons to select the TV system of the country or part of the
world from where you want to receive the TV channels.
* Supporting channel : C(V/UHF 02~69) S(Cable 01~41)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I : PAL I/II (U.K/Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
M : NTST M
Storage
from
To select a programme number or enter the programe number with the
number buttons from where you want to start searching for new channels.
If e.g. you want to keep the channels 1 to 10 stored earlier, enter programe
number 11. Your TV search for new channels from number 11 onwards.
* Numbers available to store : 0~99
Search
Press OK or
button to start automatic programming. All available TV
channels will be searched and stored automatically. To stop auto
programming, press the MENU button. When auto programming is
completed, the programme list menu appears.
Manual programme
Station
Auto programme
Manual programme
Programme edit
Favourite programme
To set
To change the channel.
(Change each item in Manual
Program and press the "MENU"
button to save the settings)
OK MENU
Storage
Press the
buttons to select the channel number or enter the
programme number with the number buttons in where you want to store
channel.
System
Press the
buttons to select the TV system of the country or part of
the world from where you want to receive the TV channels.
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I : PAL I/II (U.K/Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
M : NTST M
24
Adjusting the Screen
STATION ID set/Select the channel when using the TV
Press the
buttons to select VHF/UHF for aerial channels or Cable for
cable channels.
To select the channel reception type. : VHF/UHF / Cable.
Band
Channel If you know the channel number, enter it directly with the digit buttons 0 to 9.
Fine
In case of poor reception, you can improve the reception by fine tuning. Use
the
buttons to fine tune for the best picture and sound.
Search
Use the
Name
To see the assigned channel name.
It is possible to change the name stored in the memory or to assign a name
to a TV channel which has not yet been entered. A name with up 5 letters or
numbers can be given to the programme numbers 0 to 99.
buttons to search next channel backward or forward direction.
Press the
buttons to move cursor to be changed. -> Press the
buttons to select a character.(space, number 0~9, and alphabet A~Z, +,-) ->
Press OK button or MENU button.
Programme edit
Programme edit
Station
Auto programme
Manual programme
Programme edit
Favourite programme
To set
0
1
2
3
4
C
C
C
C
C
01
35
05
11
04
Delete
Move
5
6
7
8
9
C
C
C
C
C
07
50
51
41
63
Copy
Skip
OK MENU
OK MENU
Delete
Press the
buttons to select a TV channel to be deleted. ->
Press the red key on the remote control -> The background colour of
the selected channel will change to red.
Press the Delete button one more time to delete the selected channel.
All the following channels are shifted up one position.
Copy
Press the
buttons to select a TV channel to be copied. ->
Press the green key on the remote control. All the following channel
numbers are shifted down one position.
Move
Press the
buttons to select a channel number to be moved. ->
Press the yellow key on the remote control. -> Press the
buttons to move the TV channel to the desired channel number. ->
Press the yellow key again to release this function.
Skip
Press the
buttons to select a channel number to be skipped. ->
Press the blue key on the remote control. The skipped TV channel is
displayed in blue.
25
Adjusting the Screen
STATION ID set/Select the channel when using the TV
Favourite
programme
Station
Auto programme
Manual programme
Programme edit
Favourite programme
Off
__
__
__
__
__
__
__
__
_____
_____
_____
_____
_____
_____
_____
_____
OK MENU
This function lets you select your favourite programmes directly. (8 channel)
Press the
buttons to select a channel.
* Yellow key (remote control) :
Favourite Program On : Rotate favourite channel
Favourite Program Off : To display the previously selected TV channel.
26
Adjusting the Screen
PICTURE ID adjust the picture function(RGB/DVI)
PSM
PSM
CSM
XD
Cinema
Reset
<
Picture
Dynamic
Standard
Mild
Game
User
OK MENU
The PSM function automatically adjusts the screen
image quality.
• Dynamic
Select this option to display with a sharp image.
• Standard
The most general and natural screen display status.
• Mild
Select this option to display with a mild image.
• Game
Select this option to enjoy dynamic image when
playing a game.
• User
Select this option to use the user-defined settings.
CSM
PSM
CSM
XD
Cinema
Reset
<
Picture
9300K
6500K
sRGB
User
OK MENU
The CSM function automatically adjusts the screen
colour set.
• 9300K
Slightly purplish white.
• 6500K
Slightly bluish white.
• sRGB
Slightly lower brightness.
• User
Select this option to use the user-defined settings.
Red / Green / Blue
Set your own colour levels.
RESET
Reset
Picture
Return to the default settings PSM, CSM at the factory.
PSM
CSM
XD
Cinema
Reset
To Set
OK MENU
27
Adjusting the Screen
PICTURE ID adjust the picture function (TV/AV/Component/HDMI)
PSM
PSM
CSM
XD
Cinema
Reset
<
Picture
Dynamic
Standard
Mild
Game
User
OK MENU
The PSM function automatically adjusts the screen
image quality.
• Dynamic
Select this option to display with a sharp image.
• Standard
The most general and natural screen display status.
• Mild
Select this option to display with a mild image.
• Game
Select this option to enjoy dynamic image when
playing a game.
• User
Select this option to use the user-defined settings.
CSM
PSM
CSM
XD
Cinema
Reset
<
Picture
Cool
Normal
Warm
User
OK MENU
The CSM function automatically adjusts the screen
colour set.
• Cool
Slightly purplish white.
• Normal
Slightly bluish white.
• Warm
Slightly reddish white.
• User
Select this option to use the user-defined settings.
Red / Green / Blue
Set your own colour levels.
XD
PSM
CSM
XD
Cinema
Reset
<
Picture
Auto
Manual
XD is LG Electronics unique picture improving
technology to display a real HD source through an
advanced digital signal processing algorithm.
It's not available to use this function in RGB-PC or
DVI-PC modes.
Manual is activated after selecting the user of PSM.
OK MENU
Cinema (Function works in the following mode - TV, AV, Component 480i/576i)
When you watch the movie, this function adjusts the set to the best picture appearance.
Reset
Return to the default settings PSM, CSM, XD, Cinema at the factory.
28
Adjusting the Screen
SOUND ID to adjust the sound function
SSM
AVL
Balance
<
Sound
0
Flat
Music
Movie
Sports
User
OK MENU
SSM
The best sound tone quality will be selected automatically depending on the video type that
you're currently watching.
• Flat : The most commanding and natural audio.
• Music : Select this option to enjoy the original sound when listening to the music.
• Movie : Select this option to enjoy sublime sound.
• Sports : Select this option to watch sports broadcasting.
• User : Select this option to use the user-defined audio settings.
AVL
To adjust uneven sound volumes across all channels or signals automatically to the most
appropriate level. To use this feature, select On.
Balance
Use this function to balance sound from the left and right speakers.
29
Adjusting the Screen
TIME ID to adjust the time function
Time
Clock
Off time
On time
Auto sleep
-- : --
OK MENU
Clock
This function is used to set up of current time.
You must set the time correctly before using On/Off time function.
1) Press the MENU button and then use
button to select the TIME menu.
button to select the Clock menu.
2) Press the
button and then use
button and then use
button to set the hour(00~23).
3) Press
4) Press
button and then use
button to set the minutes(00~59).
The default value is -- : --.
5) Press the OK/MENU button to save.
Off/On time
The Off time automatically switches the set to off mode at the pre-set time.
button to select the TIME menu.
1) Press the MENU button and then use
2) Press the
button and then use
button to select Off time or On time.
3) Press the
button and then use
button to set the hour(00~23).
4) Press the
button and then use
button to set the minutes(00~59).
5) Press the
button and then use
button to select On or Off.
6) Only On time function; Press the
button and then
button to adjust volume level
and programme number.
7) Press the OK/MENU button to save.
Auto sleep
If Auto sleep is active and there is no input signal, the set switches to off mode
automatically after 10 minutes. ( It is not working in PC)
button to select the Auto sleep menu.
1) Press the MENU button and then use
2) Press the
button and then use
button to select On or Off.
3) Press the OK/MENU button to save .
Note
• In the event of power interruption (disconnection or power failure), the Clock must be reset.
• Two hours after the set is switched on by the On time function it will automatically switch
back to off mode unless a button has been pressed.
• Once the On or Off time is set, these functions operate daily at the preset time.
• Off time function overrides On time function if they are set to the same time.
• The set must be in off mode for the On time to work.
• On time will move on to auto off if no activity is received in 2hours after setting the On time.
30
Adjusting the Screen
SPECIAL ID to Select the special function
Special
Language
Child lock
DDC-CI
XD Demo
OK MENU
Language
To choose the language in which the control names are displayed.
Child lock
Use the
buttons to select On or Off. It can be set up so that it can only be used with
the remote control. This feature can prevent unauthorized viewing.
In order to lock the OSD screen adjustment, set the Child lock tab to the 'On' position.
In order to unlock it, do the following :
* Push the MENU button on the remote control and set Child lock to the 'Off' position.
DDC-CI
DDC/CI(Display Data Channel Command Interface) is communication protocol for
communications between PC and monitor.
DDC/CI makes it possible to adjust and setup detailed functions on PC instead of the
monitor OSD.
Monitor can be adjusted with PC by connecting communication between PC and
monitor when DDC/CI is ON, and monitor cannot be adjusted with PC because
communication between PC and monitor is disconnected when DDC/CI is OFF.
XD Demo
Use it to see the difference between XD demo on and XD Demo off.
(XD Demo function is not available in RGB PC/ DVI PC mode.)
31
Adjusting the Screen
SCREEN ID to adjust the screen function
Resolution
Auto config.
Manual config.
ARC
Reset
<
Screen
1024 x 768
1280 x 768
1360 x 768
1366 x 768
OK MENU
Resolution
To view the best resolution of RGB-PC mode. Select the same resolution on OSD with
PC's. It's working at RGB-PC mode when vertical frequency is 60Hz.
Auto
config.
This button is for the automatic adjustment of the screen Position, Clock and Phase.
(It is not working in DVI.)
Manual
config.
This button is for the manual adjustment of the screen Position, Clock and Phase.
• H-Position (It is not working In DVI-PC mode.)
To move the displayed image left or right.
• V-Position (It is not working In DVI-PC mode.)
To move the displayed image up or down.
• Clock (It is not working In DVI-PC mode.)
To minimize any vertical bars or stripes visible on the screen background.
The horizontal screen size will also change.
• Phase (It is not working In DVI-PC mode.)
To adjust the focus of the display. This item allows you to remove any horizontal noise
and clear or sharpen the image of characters.
ARC
To select the image size of the screen.
• When TV/Video mode: Spectacle, Original, 4:3, 16:9, 14:9, Zoom1, Zoom2
• When RGB/DVI/HDMI/Component mode: 4:3, 16:9
Reset
Use this function to reset the product to the factory default. However, language selection
will not be initialized.(It is working in RGB-PC mode.)
32
Troubleshooting
No image is displayed
● Is the product's power cord
connected?
• Check if the power cord is properly connected to
the outlet.
● Is the power indicator turning on?
• See if the power switch is turned on.
● Power is on, power indicator is blue
but the screen appears extremely
dark.
• Adjust brightness and contrast again.
● Does the power indicator look amber?
• If the product is in power saving mode, move the
mouse or press any key.
• In DVD Player or Settop Box, check the power
status of connected device.
● Does the 'Out of range' message
appear?
• The signal from the PC (video card) is out of the
vertical or horizontal frequency range of the
product. Adjust the frequency range by referring to
the Specifications in this user's guide.
* Maximum resolution
1366 X 768 @60 Hz
● Does the 'Check signal cable'
message appear?
• The signal cable between PC and product is not
connected. Check the signal cable.
• Press the 'INPUT' button in the remote control to
check the input signal.
'Unknown Product' message appears when the product is connected.
● Did you install the driver?
• Install the product driver, which is provided with
the product, or download it from the web site.
(http://www.lge.com)
• See if the plug&play function is supported by
referring to the video card user's guide.
Note
* Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times
every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second.
The unit is Hz.
* Horizontal frequency: The horizontal interval is the time to display one vertical line. When the 1 is divided by
horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal
frequency. The unit is kHz.
33
Troubleshooting
The screen image looks abnormal.
● Is the screen position wrong?
• Adjust the Position menu in OSD .
• See if the video card resolution and frequency
are supported by the product. If the frequency is
out of range, set to the recommended resolution
in the Control Panel – Display – Setting menu.
● Do thin lines appear on the
background screen?
• Adjust the Clock menu in OSD.
● Horizontal noise appears or the
characters look blurred.
• Adjust the Phase menu in OSD.
After-image appears on the product.
● After-image appears when the
product is turned off.
• If you use a fixed image for a long time, the pixels
may be damaged quickly. Use the screen saver
function.
34
Troubleshooting
The audio function does not work.
● No sound?
• Check if the audio cable is connected properly.
• Adjust the volume.
• Check if the sound is set properly.
● Sound is too low.
• Adjust the volume.
The TV function does not work.
● The TV signal is not being received.
• See if you have selected the proper channel
mode.
• Use the automatic channel setup function.
• Check if the TV antenna is properly connected.
Screen colour is abnormal.
● Screen has poor colour resolution (16
colours).
• Set the colour resolution to more than 24 bits (true
colour)
Select Control Panel – Display – Settings
– Colour Table menu in Windows.
● Screen colour is unstable or monocolour.
• Check the connection status of the signal cable.
Or, re-insert the PC video card.
● Do black spots appear on the screen?
• Several pixels (red, green, white or black colour)
may appear on the screen, which can be
attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
35
Specifications
The product specifications can change without prior notice for product improvement.
LCD Panel
Video Signal
Screen Type
Pixel Pitch
18.51 inches Wide (47.01 cm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 47.01 cm
0.10(H) x 0.30(V) mm
Max. Resolution
1366 X 768 @60 Hz
Recommended Resolution
1360 X 768 @60 Hz
Horizontal Frequency
30 - 61 kHz
Vertical Frequency
56 - 75 Hz
Synchronization Type
Separate Sync, Digital
Input Connector
S-Video, Composite video, TV, D-Sub Analog, DVI-D, HDMI, PC Audio In,
Headphone/Earphone, component
Power
Rated Voltage
Power Consumption
AC 100-240V~ 50/60Hz 0.6A
On Mode : 35 W (Typ.)
Sleep Mode ≤ 1 W
Off Mode ≤ 1 W
Tilt
Tilt Range
-5˚ ~ 15˚
Dimension/Weight
Size (WxLxH)
454.7 mm x 193.2 mm x 362.8 mm
Weight (excl. package) 3.8 kg (8.38 Ibs)
Environmental Conditions Operational Condition Temperature: 10˚C ~ 35˚C , Humidity: 20% ~ 80%
Storage Condition
Temperature: -10˚C ~ 60˚C , Humidity: 5% ~ 90%
Power Indicator
Mode
On Mode
Sleep Mode
Off Mode
Product
Blue
Amber
Off
36
Download PDF