ENGLISH
P/NO : MFL67477507
Copyright © 2018 LG electronics Inc. All rights reserved.
IMPORTANT SAFETY INFORMATION ............3
INSTALLATION...............................................10
INNER PARTS ................................................11
OPERATIONS.................................................13
G*-*4**/ G*-*5**
Starting
Before Setting The Temperature
Door Alarm
Self Test
Controls For Freezer Compartment
Controls For Refrigerator Compartment
Express Freeze
Child Lock (Optional)
Wi-Fi
Green Ion Door Cooling
Vegetable Drawer
Defrosting
Deodorizer (Optional)
Ice Making (Optional)
Hygiene Fresh (Optional)
Water Dispenser (Optional)
Smart Diagnosis (Optional)
Lamp Replacement
SUGGESTIONS ON FOOD STORAGE .........23
CLEANING .....................................................24
GENERAL INFORMATION .............................25
IMPORTANT WARNINGS ..............................26
BEFORE CALLING FOR SERVICE ...............27
2
WARNING
Keep ventilation openings, in the appliance enclosure or in
the built-in-structure, clear of obstruction.
Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the
manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage
compartment, unless they are recommended by the
manufacturer.
The refrigerant and insulation blowing gas used in the
appliance requires special disposal procedures. When
disposal, please consult with services agent or a similarly
qualified person.
3
If gas used is R600a
This appliance contains a small amount of isobutane refrigerant
(R600a), natural gas with high environmental compatibility, but it is
also combustible. When transporting and installing the appliance,
care should be taken to ensure that no parts of the refrigerating
circuit are damaged. Refrigerant squirting out of the pipes could
ignite or cause an eye injury. If a leak is detected, avoid any naked
flames or potential sources of ignition and air the room in which the
appliance is standing for several minutes.
Never startup an appliance showing any signs of damage. If in
doubt, consult your dealer.
All electrical and electronic products should be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the government
or the local authorities.
The correct disposal of your old appliance will help prevent potential negative consensus for the
environment and human health.
For more detailed information about the disposal of your old appliances, please contact your city
office, waste disposal service or the shop where you purchased the product.
(*NOTE - 1,2,3 are applicable for Jordan Regulations and other countries as per applicability)
4
Do not use or store
inflammable materials like
ether, benzene, alcohol,
medicine, LP gas, spray or
cosmetics
near or in the
refrigerator.
It may cause
explosion or fire.
5
Install in places away from the fire
such as the place
where flammable
gas is leaked.
It may cause fire.
6
like gasket
7
Do not place glass containers,
bottles or cans (especially
those containing carbonated
drinks) in the freezer
compartment, shelves or ice
bin that will be exposed to
temperatures below freezing.
Completely empty inside before taking
out the container from the door.
8
Please do not use a dishwasher to clean the lower drawers; the high temperature may cause
damage to the baskets which make them unusable.
If the appliance is equipped with a lock (some countries only), keep the key out of reach of children.
This appliance is intended to be used in household and similar applications such as
- staff kitchen areas in shops, offices and other working environments;
- farm houses and by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments;
- catering and similar non-retail applications.
9
Dimensions and Clearances
Too small of a distance from adjacent items
may result in degradation of freezing capability
and increased electricity costs. Allow over
50mm clearance from each adjacent wall when
installing the appliance.
Image for representation purpose only
-
G*-*5**
A
700
G*-*4**
700
B
1740
1640
C
572
572
D
15
15
E
660
660
F
700
700
G
1035
1035
H
1200
1200
Ambient Temperature
The appliance is designed to operate within a
limited range of ambient temperatures,
depending on the climate zone. do not use the
appliance at a temperature exceeding the limit.
The internal temperatures could be affected by
the location of the appliance, the ambient
temperature, the frequency of door opening
and so on.
The climate class can be found on the rating
label.
5. After installing the appliance, connect the
power plug into a socket outlet. Before
moving and discarding the appliance,
disconnect the plug from the socket outlet.
Climate Class
Ambient Temperture Range 0C
SN (Extended Temperate)
+10 - +32
N (Temperate)
+16 - +32
ST (Subtropical)
+16 - +38
T (Tropical)
+16 - +43/+10 - +43*
*Australia, India, Kenya
NOTE
The appliances rated from SN to T are intended
to be used at an ambient temperature between
100C and 430C
Inverter-On feature (Optional)
Minimum requirement: UPS/ Inverter should be in ON condition having minimum 600VA
capacity along with minimum 120Ah capacity battery connected with the refrigerator’s
power supply socket.
10
Water Dispenser Model
Freezer Temperature
Control Dial
FREEZER
COMPARTMENT
Smart Diagnosis
Lamp
Shelf
Twisting Ice Serve
Type Ice Making
Freezer Door Rack
REFRIGERATOR
COMPARTMENT
Water Tank
Lamp
Deodorizer (Optional)
Fresh Room Drawer
/Pull Out Tray (Optional)
Shelves
Refrigerator Door
Rack
Hygiene Fresh
(Optional)
Egg Tray
Vegetable Drawer
Levelling Screw
- The automatic defrosting system in the appliance ensures that the compartment remains free of ice
build up under normal operating conditions
11
Non Water Dispenser Model
Freezer Temperature
Control Dial
FREEZER
COMPARTMENT
Smart Diagnosis
Lamp
Shelf
Twisting Ice Serve
Type Ice Making
Freezer Door Rack
REFRIGERATOR
COMPARTMENT
Lamp
Deodorizer (Optional)
Refrigerator Door
Rack
(Optional)
Fresh Room Drawer
/Pull Out Tray (Optional)
Shelves
Hygiene Fresh
(Optional)
Refrigerator Door
Rack
Vegetable Drawer
Egg Tray
Levelling Screw
- The automatic defrosting system in the appliance ensures that the compartment remains free of ice
build up under normal operating conditions
12
‘3’ or ‘4’.
‘5’.
When the freezer compartment is not cold enough in winter, adjust the control for the freezer to
High (6~8).
13
CONTROLS FOR REFRIGERATOR COMPARTMENT
FOR INTERNAL CONTROLLER MODEL
REF. TEMP CONTROL
COLD
COLDEST
Ref. Temp Control Button
The default setting of the temperature control button
for the refrigerator compartment is NORMAL.
To control the refrigerator temperature, press the REF.
TEMP CONTROL button.
Whenever pressing the button, LED emitting the light.
The temperature is set in 7 steps, from COLD to
COLDEST cooling. (COLD = warmest, COLDEST =
coldest temperature)
FOR EXTERNAL CONTROLLER MODEL
Display graphic can be different, depend on the type of your refrigerator.
For non-dual display
For dual display
Press ‘FRIDGE’ button to control refrigerator temperature.
Whenever pressing the button, the LED emits light.
Press ‘Hygiene Fresh’ button to operate hygiene fresh motor (optional).
0
- Touch a button, Fridge temperature will be down each 1OC
- Touch b button, Hygiene Fresh motor will be on, power mode, off.
EXPRESS FREEZE
When the refrigerator is first turned ON the EXPRESS FREEZE feature can be turn ON. The
compressor and circulating fan operate at maximum cooling capacity to quickly lower the refrigerator
temperature. It shuts off automatically.
For non-dual display
For dual display
• If warm food is placed into the refrigerator, FAST FREEZING can be started with the button on the control
panel. FAST FREEZING will shut off when the temperature reaches the proper level or it can be shut off
manually by pressing the FAST FREEZING button.
14
CHILD LOCK (OPTIONAL)
• CHILD LOCK
Press and hold the child lock button for 3 seconds to lock the child lock. When it is locked, the Lock LED
will be on and the other button will not operate. To unlock, press and hold the CHILD LOCK button for 3
seconds again.
For non-dual display
For dual display
Wi-Fi
This sets the refrigerator to connect to your home's Wi-Fi network.
For non-dual display
For dual display
Wireless LAN module Specifications
Model
LC-004
Frequency Range
2412 Mhz - 2472 MHz
IEEE 802.11b: 17.82 dBm
Output Power (Max)
IEEE 802.11g: 17.72 dBm
IEEE 802.11n: 16.61 dBm
Wireless function S/W version : V 1.0
GREEN ION DOOR COOLING
Cool air vent
The anion coating in the duct cover purifies the air and helps
stored foods remain fresh longer.
If water of foreign substances enter the cool air vent while
cleaning, efficiency will be lowered. In addition, if gasket is
damaged, efficiency may be lowered owing to the escape of
cool air.
VEGETABLE DRAWER
How to use
Vegetable drawer can be used through the control of knob.
Check the position of knob prior to store the food.
Do not locate the knob on the middle point.
15
ICE MAKING
Twisting Ice Serve Type
To make ice cubes, fill the ice tray with water and insert
in its position.
To remove ice cubes, hold the lever of the tray and pull
turn gently. Then, ice cubes drop in to the ice cube box.
WARNING
Fill with potable water only.
E
NOT
You can disassemble the Ice Maker to
secure space in the freezer.
Ice Trays
Ice Cube Box
Twisting Ice Serve Type: Remove 1 and 2
1. Ice Tray
2. Ice Cube Box
1
WARNING
2
Do not use anything other than water.
Fill the water up to the marked line.
<Twisting Ice Serve Type>
16
HYGIENE FRESH (OPTIONAL)
CAUTION
Before installing or using the product, make sure to read the owner's manual carefully to
use the product accurately as intended. This HYGIENE FRESH filter has the
antibacterial function of removing the virus or bacteria inside the refrigerator and the
deodorizer function to remove the scent.
The function has tested and has been certificated by authorized institutions Intertek
Switch over to use mode
Switch over to use mode.
button on the display panel on the
• To use the HYGIENE FRESH filter, touch the
front side of the door and switch over to the AUTO or POWER mode.
(Whenever you touch the button, the HYGIENE FRESH filter will be switched to
AUTO
POWER
OFF AUTO.)
AUTO
POWER
OFF
AUTO
CAUTION
When the user switches to AUTO or POWER mode, the LED around the filter is also turned on. Do
not put in your finger or alien particles inside the fan. It can be caused of an injury or malfunction.
CAUTION
Do not wash the HYGIENE FRESH filter by using water because it can be caused of malfunction.
This filter may not be effective for all types of bacteria and virus.
This is effective to remove the bacteria which is not on the food in the refrigerator.
You can purchase the HYGIENE FRESH filter at the nearest distributor or the service center.
17
WATER DISPENSER (OPTIONAL)
Pour water after the water tank is in position.
Necessarily separate the water tank to clean it our when not in use.
When the water tank is not in position after filling it with water, water can leak out by the valve.
Pouring water in the water tank
Cover Cap
1. Open the cover cap and pour water into the
water tank.
2. Close the cover cap.
3. The water tank is optional removable part
which can be applied to enlarge the storage
capacity. You can use the upper basket after
removing the water tank and closing up the
hole with a plug.
The plug is enclosed with the egg tray.
Caution
Do not use anything other then water, even
hot water needs to be cooled before being
poured into the water tank.
Do not fill more than the indicated level.
Drinking Water
1. Press the dispenser pad with cup.
2. The water is released when the dispenser
pad is pressed. The pad returns to its original
position when the cup is removed and the
water stops its flow.
18
SMART DIAGNOSIS (Only for applied models)
Using Smart ThinQ
Application
The application is subject to change for
appliance improvement purposes without
notice to users.
Functions may vary by model.
Installing Smart ThinQ
Open Source Software Notice
Information
Search for the LG Smart ThinQ application from
the Google Play Store or Apple App Store on a
smart phone. Follow instructions to download
and install the application.
Smart Diagnosis™
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright
notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such as
the cost of media, shipping, and handling) upon
email request to opensource@lge.com. This
offer is valid for three (3) years from the date on
which you purchased the product.
If you use the Smart Diagnosis function, you will
be provided with the useful information such as
a correct way of using the appliance based on
the pattern of use.
Smart DiagnosisTM Using a Smart
Phone
Wi-Fi Function
For appliances with the
or
logo
Communicate with the appliance from a smart
phone using the convenient smart features.
Firmware Update
Keep the appliance performance updated.
For appliances with the
or
logo Use
this function if you need an accurate diagnosis
by an LG Electronics customer information
centre when the appliance malfunctions or
fails.
Settings
Allows you to set various options on the
refrigerator and in the application.
NOTE
Smart DiagnosisTM can not be activated unless
the appliance is connected to power. IF the
appliance is unable to turn on, then
troubleshooting must be done without using
Smart DiagnosisTM.
To verify the Wi-Fi connection, check that
Wi-Fi
icon on the control panel is lit.
LG Smart ThinQ is not responsible for any
network connection problems or any faults,
malfunctions, or errors caused by network
connection.
The machine supports 2.4 GHz Wi-Fi
networks only.
If the appliance is having trouble connecting
to the Wi-Fi network, it may be too far from the
router. Purchase a Wi-Fi repeater (range
extender) to improve the Wi-Fi signal
strength.
The Wi-Fi connection may not connect or may
be interrupted because of the home network
environment.
The network connection may not work
properly depending on the internet service
provider.
The surrounding wireless environment can
make the wireless network service run slowly.
19
SMART DIAGNOSIS (Only for applied models)
Using Smart DiagnosisTM
FOR INTERNAL CONTROLLER MODEL
Smart diagnosis function is...
Use the function to contact the service center and receive precise diagnosis when the refrigerator
malfunctions or fails. Use it only to connect to the consultant and do not use it in normal times.
How to use the function
1. Open the refrigerator door.
(Close the freezer door)
2. Open and close the door 5 times in 8
seconds to make th LED lamp inside the
chamber blink.
3. Place the phone near the speaker hole at
the top right.
Check if the speaking side (microphone) of
the telephone is toward the speaker hole.
NOTE
Ÿ Position the phone so that its microphone is
aligned with the speaker hole.
TM
Ÿ The Smart Diagnosis sound is generated
after around three seconds.
Ÿ Do not take the phone off the speaker hole
while the data is transmitted.
Ÿ Hold the phone to the upper right speaker
hole and wait while the data is transmitted.
Ÿ The data transfer sound may be harsh to the
ear while the Smart DiagnosisTM data is being
transmitted, but do not take the phone off the
speaker hole for accurate diagnosis until the
data transfer sound has stopped.
Ÿ When the data transfer is complete, the
transfer completion message is displayed
and the control panel is automatically turned
off and then on again after a few seconds.
After the customer information centre
explains the diagnosis result.
TM
Ÿ The Smart Diagnosis function depends on
the local call quality.
Ÿ The communication performance will
improve and you can transmit a better signal
if you use a land line home phone.
TM
Ÿ If the Smart Diagnosis data transfer is poor
due to poor call quality, you may not receive
the best Smart DiagnosisTM service.
4. Do not take away the telephone while
data is being transmitted.
During the data transmission for smart
diagnosis, wait with the telephone placed
near the speaker hole at the top right side.
CAUTION
The transmission sound may be irritating.
Do not take away the telephone until the
sound stops for good diagnosis.
5. After the completion of the data
transmission, listen to the explanation of
the consultant about the result of the
smart diagnosis.
When the data transmission is completed,
along with the display of the data
transmission completion, the refrigerator will
be automatically turned off and on a few
seconds later.
Listen to the explanation of the consultant
about the result of the analyzed diagnosis
and follow the instructions.
20
SMART DIAGNOSIS (Only for applied models)
Using Smart DiagnosisTM
FOR EXTERNAL CONTROLLER MODEL
Smart diagnosis function is...
Use the function to contact the service center and receive precise diagnosis when the refrigerator
malfunctions or fails. Use it only to connect to the consultant and do not use it in normal times.
How to use the function
CAUTION
1. Close all refrigerator doors, and press
and hold display lock button to make it
locked state.
If the display is already in locked state, press
and hold lock button to reset the lock and
press and hold the lock button again to make
it locked state.
The transmission sound may be irritating.
Do not take away the telephone until the
sound stops for good diagnosis.
5. A f t e r t h e c o m p l e t i o n o f t h e d a t a
transmission, listen to the explanation of
the consultant about the result of the
smart diagnosis.
When the data transmission is completed,
along with the display of the data transmission
completion, the refrigerator will be
automatically turned off and on a few seconds
later.
Listen to the explanation of the consultant
about the result of the analyzed diagnosis and
follow the instructions.
CAUTION
If it passes 5 minutes in locked state, smart
diagnosis function will not be activated, so
be careful.
2. Press and hold fridge temperature button
for 3 seconds or longer.
(All display screens will be turned off,
and in a while, 3 will be displayed on the
fridge temperature display part.)
3. Open all refrigerator compartment and
freezer compartment doors and place the
telephone near the speaker hole at the
top right side.
Check if the speaking side (microphone) of
the telephone is toward the speaker hole.
4. Do not take away the telephone while
data is being transmitted.
During the data transmission for smart
diagnosis, wait with the telephone placed
near the speaker hole at the top right side.
The remaining time for data transmission is
displayed on the display screen.
21
NOTE
Ÿ Position the phone so that its microphone is
aligned with the speaker hole.
TM
Ÿ The Smart Diagnosis sound is generated
after around three seconds.
Ÿ Do not take the phone off the speaker hole
while the data is transmitted.
Ÿ Hold the phone to the upper right speaker
hole and wait while the data is transmitted.
Ÿ The data transfer sound may be harsh to the
ear while the Smart DiagnosisTM data is being
transmitted, but do not take the phone off the
speaker hole for accurate diagnosis until the
data transfer sound has stopped.
Ÿ When the data transfer is complete, the
transfer completion message is displayed
and the control panel is automatically turned
off and then on again after a few seconds.
After the customer information centre
explains the diagnosis result.
TM
Ÿ The Smart Diagnosis function depends on
the local call quality.
Ÿ The communication performance will
improve and you can transmit a better signal
if you use a land line home phone.
TM
Ÿ If the Smart Diagnosis data transfer is poor
due to poor call quality, you may not receive
the best Smart DiagnosisTM service.
OPERATIONS
LAMP REPLACEMENT
NOTE : This product applies LED Lamp which cannot be replaced
by the user. Please contact authorized service centre for
the lamp replacement.
INVERTER-ON FEATURE (Optional)
1. While using this feature, the refrigerator will work on basic requirement as required by the product.
2. The results of the Inverter-On feature may vary depending on the number of appliances that are
running on inverter.
3. For optimum running of refrigerator during Inverter-On mode, it is recommended to switch off the
other appliances which are not in use.
4. It is recommended to confirm the quality of food items before consumption.
5. Ice cream etc. may get soften during the use of this feature, if situation arises so, it is
recommended to change the setting as per one’s choice.
LED PATTEN DURING INVERTER-ON MODE (OPTIONAL)
During the use of this feature, you will find this pattern of LED running. It is a symbol that the
product is running at basic energy requirement. One can press the button “REF TEMP” to
change the LED setting during power cuts, if needed. The LED will then show the setting as
desired. When the mode is changed from Normal supply to Inverter mode & vice versa, the
LED pattern will take some time to display the change.
22
• In the event of a blackout, call the electricity company and ask how long it is going to last.
- You should avoid door openings while the power is off.
- When the power supply gets back to normal, check the condition of the food.
• If there are chill compartments in the appliance, do not store vegetables and fruits with higher
moisture content in the chill compartments as they may freeze due to the lower temperature.
23
24
25
SUPPLY CORD
REPLACEMENT
If the supply cord is damaged, it
must be replaced by the
manufacturer or its service agent
or a similarly qualified person in
order to avoid a hazard.
Disposal of the old appliance
This appliance contains fluid (refrigerant, lubricant) and is made of
parts and materials which are reusable and/or recyclable.
All the important materials should be sent to the collection center of
waste material and can be reused after rework (recycling). For take
back, please contact with the local agency.
“(For CENELEC countries) This appliance can be used by children
aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.”
26
* CENELEC countries: AT, BE, BG, HR, CY, CZ, DK, EE, FI, MK, FR,
DE, GR, HU, IS, IE, IT, LV, LT, LU, MT, NL, NO, PL, PT, RO, SK, SI,
ES, SE, CH, TR, GB
“This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with
the appliance.”
27
P/NO : MFL67477507
Download PDF

advertising