The picture shown on front page is representative model. LG Electronics reserves its right to change, modify or alter any design without any prior notice.
Identification of parts
Lamp 10 watt
Small Basket (Optional)
Soft tray Veg.
Base stand with
Due to continuous improvements at LGEIL, specifications of refrigerator are subject to change without prior notice.
If you find out some parts which are not in your unit, the parts are applied to other models.
n The meanings of the symbols used in this manual are as shown below.
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage to properties only.
This symbol alerts you to the risk of electric shock.
Be sure not to do.
Be sure to follow the instruction.
Do not modify or extend the Power Cord length.
• It will cause electric shock or fire.
Power Cord Replacement
When the power cord or the power plug is damaged or the holes of the outlet are loosed,
do not use them.
It may cause electric shock or short circuit to make fire.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
E Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with one of the
same size, shape and wattage.
• Unplug the power cord from the outlet.
• Remove the lamp cover by pulling outside.
• Make sure the bulbs are cool to touch.
• Remove the lamp by turning it clockwise.
• Put new lamp and tighten it by turning it counter clockwise.
• Make sure the bulb is properly tightened.
• Put the cover lamp back and push it gently with your thumb till a click sound appears.
Child Entrapment Warning
An empty refrigerator can be a dangerous attraction to children. Remove
gaskets, latches, lids or the entire door from your unused appliance, or
take some other action to make it harmless.
In the event of an electric short circuit, earthing reduces the risk of electric
shock by providing an escape wire for the electric current.
Improper use of the earthing plug can result in an electric shock. Consult
a qualified electrician or service person if the grounding instructions
are not completely understood, or if you have doubts on whether the
appliance is properly earthed.
In order to prevent possible electric shock, this appliance must be earthed.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
NEVER STORE EXPLOSIVES AND CHEMICALS INSIDE
Unplug the appliance before cleaning or maintenance.
Never place glass products in the freezer because they may
break due to expansion when their contents are frozen.
To prevent injury to the user and property damage, the following instructions
must be followed. Incorrect operation due to ignoring of instruction will cause
harm or damage, the seriousness is classified by the following indications.
Plug in the power
Operate or stop the
unit by switch only.
It will cause electrical
Otherwise, it will cause
electric shock or fire due shock or fire due to
to heat generation or
Do not modify power
cord length or share
the outlet with other
Do not use a damaged
or an unspecified
It will cause electrical shock
or fire. If the supply cord is
damaged, it must be replaced
by a special cord or assembly
available from the manufacturer
or its service agent.
Do not operate with Do not splash water
wet hands or in damp on your refrigerator.
It will cause electrical shock
It may cause electrical
or fire due to heat generation. shock.
It may cause short circuit.
During average length vacations, you will probably find
it best to leave the refrigerator in operation. Place
freezable items in freezer for longer life. When you plan
to be away for an extended period, remove all food,
disconnect the power cord, clean the interior
thoroughly, and leave each door OPEN to prevent
odour formation. To operate again, let the refrigerator
run for 6-8 hrs. for stabilization.
It is natural for moisture in the air to condense on the cold surface. This
leads to a regular build up of frost on the surface of the freezer.
Defrost regularly to avoid heavy frost building on the evaporator which
results in reduced cooling efficiency.
Push the defrost Knob after every
3 days / Ice Level reaches defrost
Fill ice trays with water, place in
To remove ice cube, gently twist
Do not use sharp tool to remove ice tray, otherwise you may
puncture the evaporator resulting gas leakage thus non
performance of refrigerator
How to get good results
Cover or wrap all foods that you put into your
refrigerator with polythene or aluminium foil,
preventing the mixing of flavours and to keep
the food from drying.
Don't keep hot milk or hot food in your refrigerator.
This will result in an increased temperature and
increase in power consumption.
Don't open the refrigerator door too often-hot air will enter
and increase the temperature.
Never overload your refrigerator or cover the shelves
with paper or plastic sheets as it will reduce its efficiency.
Close the door properly, make sure that there is no
gap between the gasket and the cabinet of your LG
Wipe excessive moisture on food or place it inside
containers or plastic bags. This will help in retaining
its freshness for a longer period of time.
Feel free to call your LG Customer Information Centre
(CIC) / Branch / LG Representative in case your
refrigerator has suffered a damage in transit.
It is recommended to use Voltage Stabilizer (0.5KVA)
if power fluctuations are frequent and out of
specified voltage range (160-260V)**, Stabilizer
usage increases the refrigerator life.
** As per LGEIL Test Standards.
Before Calling for Service
Type of Complaint
1. Refrigerator does
in ‘ OFF' position.
Power Supply Off.
Check that the thermostat knob is on 'Normal' (No.4) position
and not in off position.
Check that the refrigerator main supply plug is connected
to the wall socket and that the supply is on. Check that the
fuse is intact in the supply line.
Stabilizer not working Please plug power cord of refrigerator directly in the wall
socket and then check, if it works then get the stabilizer
checked by Stabilizer Repairing Centre.
attempts to start,
but does not operate.
Install a line-correcting transformer in the mains, or a
3. Refrigerator contents
not cooling and
Difficulty in formation
of ice and ice-cream.
Defrosting over due
Restriction of cold
Storing hot foods.
Defrost the refrigerator.
Provide space in between the dishes. If the shelves are
covered with cloth or polythene, remove it.
If the refrigerator is required to give a low temperature turn
the thermostat knob towards colder (No.7) position.
Avoid storing hot foods in the refrigerator, cool them to
room temperature before placing them inside the refrigerator.
4. Formation of water
drops on exterior
During the monsoon, when the humidity in the atmosphere
reaches around 90% water droplets may form around the
sides of the refrigerator cabinet, especially the top portion.
This moisture should be wiped off periodically. Contact our
serviceman to check the door seal or proper and uniform
contact with the cabinet.
5. Formation of droplets
on the underside of
the Chiller tray.
Hot and humid
In hot and humid weather the moist air rushes inside whenever
the refrigerator door is opened. This results in excess frosting
on the Evaporator and condensation on the Chiller tray bottom.
Avoid too frequent door openings.
6. Smell and odour.
Wrap and cover food stuffs properly. Place caps on bottles
and wrapping of food. and other liquid stores. If the smell persists, defrost the
refrigerator, remove all foodstuffs, clean the refrigerator
thoroughly and wipe it dry before restarting.
Normal cut-of/ cut-in
Whenever refrigerator starts & stop there is noise of
Thermostat cut-off/ cut-in & Compressor start/stop. This
is a normal phenomenon.
8. Noise from Freezer
Hissing noise from
This is normal gas expansion noise
- 10 -
- 10 -
* Your assessment is very important for improving the work
of artificial intelligence, which forms the content of this project