LG | T70CBA13P | LG T70CBA13P Owner’s Manual

INDIA'S
OFF
AUTO
Hot
Cold
WATEPR.
TEM
aa sh
ExtrW
inse
Extar R pin
ntel
GeS
nt
Detereg
Water e
g
Ex-Lar
Large
Mediumll
Sma
WASH
OPTION
Hour
Min.
Delay
Tiem
Left
WATERL
LEVE
33
Fuzzy
ny
com
Eo
Jean
Wool
urab
To
W sh
Risn e
Spin
PROCESS
DELAYT
STAR
START
PAUSE
PROGRAM
C
ck
N o.1
Warm
h i l d Lo
WASHING MACHINE*
Owner's Manual
Please read this manual carefully and thoroughly
before operating this unit.
Record model name and serial number of the set.
Quote this information to your dealer when you
require service.
AUTO
Hot
Cold
WATER.
TEMP
Extra Wash
inse
Extra R Spin
Gentle
Deterge
Water e
g
Ex-Lar e
Larg
Mediumll
Sma
WASH
OPTION
Min.
Delay
Time
Lef t
WATER
LEVEL
DELAYT
STAR
3
Fuzzy
Economy
Turbo
Wash
Rinse
Spin
PROCESS
Jean
Wool
3
PROGRAM
C
ck
Hour
nt
Warm
h i l d Lo
START
PAUSE
OFF
MODEL : WF-T7062DN
WF-T7512FN
WF-N6861DN
WF-N7035DN
WF-N7036DN
WF-N7065DN
WF-N7066DN
WF-N6866DN
WF-N6836DN
T70CSA13N
T70CBA13P
C
ontents
Read this manual
Inside you will find many helpful hints on how to use and maintain your washer properly. Just a little
preventive care on your part can save you a great deal of time and money over the life of your washer.
You will find many answers to common problems in the Troubleshooting section. If you review our
chart of Troubleshooting Tips first, you may not need to call for service at all.
Introduction
Installation
3
Safety Information
Identification of Parts
4
7
Placing, Leveling and Installation
8
Connecting Water Supply Hose
Connecting Drain Hose
9
10
Preparation Before Washing
Use of Water, Detergent, Bleach and Softener
Water Level and Amount of Detergent
Use of Bleach
Use of Softener
Stain Removal Techniques
11
12
13
13
14
15
Function of each Button
16
Fuzzy Wash (Normal Wash)
Economy Wash
Jean Wash
Wool Wash
Turbo Wash
20
20
20
20
20
Washing Process
22
Additional Features
Delay Start (Reservation) Wash
Child Lock, Mute
24
24
Care and Maintenance
Cleaning Inlet Valve Filter
Cleaning Lint Filter
Cleaning and Maintenance
26
26
27
Grounding Method
28
Troubleshooting
Common washing problems
Troubleshooting
29
30
Specification
Specification
31
Branch & Remote Area Offices
Branch & Remote Area Offices
Terms of Warranty
Warranty Card
Before Starting to Wash
Washing Programs
2
Product Features
Contents
P
roduct Features
Washer doesn't operate while the lid is open. If the lid is open during the wash,
rinse or spin cycles, the operation stops for safety.
Fuzzy Logic Control
A built-in load sensor automatically detects and measures the laundry load and
a microprocessor optimizes washing conditions such as ideal water level,
washing time and optimum detergent quantity indication.
Advanced technology is built into the Electronic Control System which ensures
the best washing result.
START
SENSING SETTING
Laundry Sensor Optimum
Water Level
Washing
Sensor
Condition
WASHING
AUTO
POWER
OFF
Turbo drum washing
When "Punch + 3" washing wings turn, the washing tub turns in the
opposite direction. This makes the both sides current of water which
improve washing-performance by rubbing clothes strongly.
3 Step washing
3 step washing makes best washing performance with low tangling.
Rubbing
Rubbing and
Shaking
Shaking and
Disentangling
Auto Restart
In the event of a power failure, the washing machine will automatically start its
cycle from the point of interruption when power is resumed.
Lint Filter
Lint and loose threads from laundry generated during the
washing cycle are caught by the lint filter for a cleaner wash.
Note : Be sure to remove the unit from all packing base, otherwise the
machine will not be able to operate properly.
Introduction
3
S
afety Information
Read carefully and thoroughly through this booklet as it contains important safety information
that will protect the user from unexpected dangers and prevent potential damages to the product.
This booklet is divided into 2 parts : Warning and Caution.
: This is a warning sign specifying user’s applications which might
be dangerous.
: This is a sign specifying ‘Strictly Forbidden’ applications.
WARNING : Failure to comply with the instructions under this
sign may result in major physical injuries or death.
CAUTION
WATER
HEATER
SAFETY
: Failure to comply with the instructions under this
sign may result in minor physical injuries or
damages to the product.
WARNING
Under certain conditions hydrogen gas may be produced in a water heater that has not been
used for two weeks or more. Hydrogen gas can be explosive under these circumstances.
If the HOT water has not been used for two weeks or more, prevent the possibility of
damage or injury by turning on all Hot water faucets and allowing them to run for several
minutes. Do this before using any electrical appliance which is connected to the HOT
water system. This simple procedure will allow any built-up hydrogen gas to escape. Since
the gas is flammable, do not smoke or use an open flame or appliance during this process.
PROPER
INSTALLATION
CAUTION
• The base opening must not be obstructed by carpeting when the washing machine is installed
on a carpeted floor.
• Install or store where it will not be exposed to temperatures below freezing or exposed to the
weather.
If the product is exposed to such conditions,electric stock, fire, break down or deformation may occur.
• Properly ground washer to conform with all governing codes and ordinances. Follow details in
Installation Instructions.
If not grounded properly, break down and leakage of electricity may occur, which may cause electric
shock.
• Must be positioned so that the plug is accessible.
If the plug is placed between the wall and the machine, it may get damaged, possibly causing fire or
electric shock.
• Make sure the plug is completely pushed into the outlet.
Failure to do so may cause electric shock and fire due to overheating.
• Do not connect ground to a gas pipe.
It can cause explosion.
• Do not connect ground to telephone wires or lightning rods.
This may be dangerous during electrical storms.
4
Introduction
S
afety Information
YOUR
LAUNDRY
AREA
WARNING
• Keep the area underneath and around your appliances free of combustible
materials such as lint, paper, rags, chemical, etc.
Operating with such materials around the machine may trigger explosion or
fire.
• Close supervision is necessary if this appliance is used by or near children.
Do not allow children to play on, with, or inside this or any other appliance.
There is potential danger that children might drown in the tub.
Do not touch the power plug with a wet hand.
It will cause electric shock
Do not put your hand, foot or anything under the washing machine
while the washing machine is in operation.
There is a rotating mechanism under the machine, so you could be injured.
WHEN USING
THE WASHER
CAUTION
• Use this appliance only for its intended purpose as described in this Owner’s Manual.
• The laundry process can reduce the flame retardancy of fabrics. To avoid such a result,
carefully follow the garment manufacturer’s wash and care instructions.
• To minimize the possibility of electric shock, unplug this appliance from the power
supply or disconnect the washer at the household distribution panel by removing the
fuse or switching off the circuit breaker before attempting any maintenance or cleaning.
NOTE : Pressing Power button to turn off does NOT
disconnect the appliance from the power supply.
• Make sure that drainage is working properly.
If water is not drained properly, your floor may get flooded.
Flooded floors may induce electricity leakage, further resulting in electric shock or fire.
• If, during spinning, opening the lid does not stop the tub within about 15 seconds,
immediately discontinue operating the machine.
Call for repair. A machine that spins with its door open may cause injuries.
Never reach into washer while it is moving.
Wait until the machine has completely stopped before opening the lid.
Even slow rotation can cause injury.
Never attempt to operate this appliance if it is damaged, malfunctioning, partially
disassembled, or has missing or broken parts, including a damaged cord or plug.
Operating with a damaged plug may cause electric shock.
Do not use water hotter than 60°C.
Use of excessively hot water may cause damage to fabrics or cause
leakage of water.
Introduction
5
S
afety Information
WHEN USING
THE WASHER
WARNING
Do not use a plug socket and wiring equipment for more than their rated capacity.
Exceeding the limit may lead to electric shock, fire , break down, and/or deformation
of parts.
Do not mix chlorine bleach with other household chemicals such as toilet cleaners,
rust removers, acids (such as vinegar) or product containing ammonia.
Mixing different chemicals can produce toxic gases which may cause death.
Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted
with combustible or explosive substances (such as wax, oil, paint, gasoline, drycleaning solvents, kerosene, etc). Do not add these substances to the wash water.
Do not use or place these substances around your washer or dryer during operation.
It may ignite or explode.
WHEN NOT
IN USE
CAUTION
• Turn off water faucets to relieve pressure on hoses and valves and to minimize leakage
if a break or rupture should occur. Check the condition of the fill hoses; they may need
replacement after 5years.
• When the air temperature is high and the water temperature is low, condensation may
occur and thus wet the floor.
• Wipe off dirt or dust on the contacts of the power plug.
Using unclean power plug may cause fire.
• Before discarding a washer, or removing it from service, remove the washer lid to
prevent children from hiding inside.
Children may be trapped and suffocated if the lid is left intact.
Do not attempt to repair or replace any part of this appliance unless
specifically recommended in this Owner’s Manual, or in published userrepair instructions that you understand and have the skills to carry out.
Operating the machine with improperly replaced parts may be a cause for fire or
electric shock.
Do not tamper with controls.
It may lead to electric shock, fire , break down, deformation.
Do not yank the power cord in an attempt to disconnect the power plug.
Securely hold the power plug to unplug the machine.
Failure to observe these instructions may cause electric shock or fire due to shortcircuit .
When you are cleaning the washing machine, do not apply water directly to
any part of the washing machine.
It will cause short circuit and electric shock.
6
Introduction
I
dentification of Parts
Body
12
POWDER DETERGENT
BOX FOR DELAYED
WASHING
14
SOFTENER INLET
Softener will automatically
flow into the tub.
* WATER SUPPLY
HOSE
Make sure the water
does not leak.
9
POWER PLUG
13
If the supply cord is
damaged, it must be
replaced by the
manufacturer
or its service agents
or similarly qualified
person in order to
avoid a hazard.
INLET H OLE F OR
BLEACH
FUNCTION SELECTOR
TUB
LINT FILTER
Clean regularly to stop
linting on the clothes
load.
* START/PAUSE
BUTTON
Use to start or stop the
washing machine
temporarily.
*CASTER
Use for easy translocation
8
DRAIN HOSE
ADJUSTABLE LEGS
8
26
Keep the drain hose
flipped down while
washing is in process.
Use to level the washing
machine for correct balance
& spin operation.
BASE
(2 adjustable legs are optional. Some models have provision for only 1 adjustable leg).
WASHING WINGS
Vertical movement of washing punch can be operated when a sufficient amount of laundry is deposited.
Set the proper water level, an excessive amount of water may increase entanglement of laundry.
Accessories
Water supply hoses
Drain hose
Anti-rat cover
Screw
Note
"*" Parts can be different according to the model.
Snap Ring
Introduction
7
C
onnecting Water Supply Hose
Normal Type
1
(Normal tap without thread & one touch type inlet hose.)
Separate Middle connector from Water Supply Hose
Separate Middle connector from the Water
Supply Hose by pulling the Pressing Rod and the
Pressing Handle that is attached to the Water
Supply Hose.
Middle
connector
Fixed Sticker
Pressing Handle
Pressing Rod
Water Supply Hose
2
Loosen the fixed nuts to connect the connector to the tap
Untighten the screw of the connector so that the
tap can be placed in the middle.
Rubber packing
screw
Fixed sticker
NOTE
In case tap is too large.
Guide plate
If the tap diameter is too large or is square,
untighten the 4 screws and remove the guide
plate. Then follow step1.
3
Fixing Connectors to the Tap
Rubber packing
Connector
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
4
Fixing Upper Connector and Middle Connector
Remove the fixed sticker in between the Upper
and Middle Connectors. Tighten the connectors
by holding one connector and twist middle
connector to the right.
5
Connector
Connector
Middle
Connector
Middle
Connector
Fixed sticker
Connecting Middle Connector and Water Supply Hose
Press down the pressing rod of the Water Supply
Hose which was separated from middle connector
(refer to Step1) and then join it to the middle
connector.
Pressing rod
Pressing handle
Water Supply Hose
6
Check for water leakage
After connecting the hose, open the tap to check
for any water leakage.
If the connection leaks, close the tap and start
again from step 1.
If you skip step 1, water leakage may occur.
Installation
9
C
onnecting Drain Hose
Before connecting Drain Hose, check your Drain Hose model and choose the correct
instructions.
§ How to connect the drain hose
1
Insert the drain hose to the connecting area at the body.
Less than 6cm
Less than 2m
The hose is placed
over a doorsill.
2
1. Press the hose clip.
2. While pressing, push the hose towards
the body.
3. Release the hose clip after pushing the
hose.
Less than 10cm
Make sure that the hose is
not crushed between the
wall and the washer .
The hose is clogged by
alien substances.
Make sure that the
hose is not crushed.
Less than 3m
Extension hose is
used.
10
Installation
Avoid submerging
the end of hose.
P
reparation BeforeWashing
Care Labels
* Look for acare label on your clothes This will tell you about the fabric content of your g arment
and how it should be washed.
Sort clothes into loads that can be washed with the same wash cycle, Water Temperature and spin speed.
Sorting
To get the best results, different fabrics need to be washed in different ways.
• SOIL (Heavy, Normal, Light)
Separate clothes according to the type and amount of soil.
• COLOR (Whites, Lights, Darks) Separate white fabrics from colored fabrics.
• LINT (Lint Producers, Collectors) Separate lint producers and lint collectors.
Lint Produ cers
Lint Collectors
Terry cloth, Chenille Towels, Nappies, Diapers
Synthetics, Corduroy, P ermanent Press, Socks
Check before Loading
• Check all pockets to make sure that they are emtpy. Things such as nails, hairclips,, matches,
pens, coins, and keys can damage both your washer and your clothes.
• Mend any torn garments or loose buttons. Tears or holes may become larger during washing.
• Remove belts, underwires, etc. to prevent damage to the machine or your clothes.
• Pretreat any dirt and stains.
• Make sure the clothes are washable in water.
• Check the washing instructions.
• Remove tissue in pockets.
WIRE
Pretreatment on stains or heavy soil
• Pretreat shirt collars and cuffs with a pre-wash product or liquid Detergent when placing them in the washer.
Before washing treat special stains with bar soaps, liquid Detergent or a paste of water and granular Detergent.
• Use a pretreat soil and stain remover.
Treat stains AS SOON AS POSSIBLE. The longer they are left the harder they are to remove.
(For more detail refer to page15)
Loading
Do not wash fabrics containing flammable materials (waxes, cleaning fluids, etc.).
Load Size
The WATER LEVELF should just cover the clothes. Adjust the load size accordingly. Loosely load clothes not higher
than the top row of holes in the washer tub. To add items after washer has started, press Start button and submerge
additional items. Close the lid and press Start button again to restart.
Light and Large-sized clothing
Clothes like downs and woollens are light weight, large and float easily. Use a nylon net and
wash them in a small amount of water. If the laundry floats during the wash cycle, it may
become damaged. Use dissolved Detergent to prevent the Detergent from clumping.
Long laundry items
Use nylon nets for long, DELICATE items. For laundry with long strings or long length , a net will prevent
tangling during washing. Fasten zippers, hook, and strings to make sure that these items don't snag on other clothes.
Nylon net is not supplied by LG.
Before Starting to Wash
11
U
1
se of Water, Detergent, Bleach and Softener
2
Deposit laundry and
press the START/
PAUSE button.
START
PAUSE
Without water, the pulsator
turns to the left and right for
about 4 seconds to sense the
amount of laundry.
3
A proper water level
and the amount of
detergent is displayed.
Press
WATER DETERGENT
XL
L
M
S
l If either the inner-tub contains water or
the laundry is wet, water level may be
different from the initial set level.(It is
not malfunctioning. It is the proper
water setting for laundry.)
l Bulky and light laundry may cause a
water level lower than usual. In this
case, manually adjust the water level.
H If you feel the water level is not as per your choice you can change the water level manually.
Usage of Detergent
l The following indication of the amount of detergent is based on a concentrated detergent.
(1 detergent cup: arround 40g)
Powder Detergent Box
WATER DETERGENT
XL
L
M
S
In case of small water level:
concentrated detergent (1/2 cup).
l Regular(high-density) detergent uses
Where you
deposit the
detergent
1.5 times as much as the
indicated amount.
Note : Follow detergent manufacturer's instructions for quantity of detergent.
H Use only powder detergent.
12
Before Starting to Wash
U
se of Water, Detergent, Bleach and Softener
Water Level and Amount of Detergent
l Concentrated detergent: 20g per 30 liters of water.
l Regular synthetic detergent: 30g per 30 liters of water.
l When sensing water levels automatically, the amount of
Water
Level
Amount Amount
of Water of laundry
bubbles. This type of detergent is specially designed
for washers
Regular synthetic
About 41g
About 61g
XL
61 l
L
39 l
Less than
3.5kg
About 26g
About 39g
M
30 l
Less than
2.0kg
About 20g
About 30g
S
29 l
Less than
1.0kg
About 19g
About 29g
detergent can differ according to the amount of laundry
even at the same water level.
. detergent, use one that generates less
l For synthetic
.
Less than*
Amount of Detergent
Concentrated
l In case of using liquid detergent, dissolve it with water
(detergent: water=1:1) and deposit it through the bleach
deposit hole
*Rated Capacity of Model
Note : To check you are using the correct amount of Detergent, lift the lid of your machine about halfway through the wash. There should be a thin layer of foam over the surface of the water. Lots of
foam may look good, but it does not cotribute to cleaning your clothes. No foam means not enough
Detergent has been used; soil and lint can settle back on the clothes or the washing machine.
If excess Detergent is used, the rinse will not be as clean and efficient. Also, it could cause
environmental pollution, so use it accordingly.
Adding the detergent
Open the detergent dispenser and deposit the appropriate amount of detergent where you deposit the detergent
Powder Detergent dispenser.
Some detergents MUST be fully dissolved before adding to your machine to get the best wash results.
Check the instructions on the detergent packet.
If you use powdered detergent it is essential that the required amount be fully dissolved in very hot water before
being added to warm or hot water for the actual wash.
Pre-dissolving detergent in warm water when washing in cold water can improve its performance.
Powder Detergent Box
Where you
deposit the
detergent
Using Liquid Bleach
• Check clothing care label for special instructions and separate the
laundry to be bleached
• Dilute liquid chlorine bleach.
• Measure the recommended amount of liquid bleach carefully
following instructions on the bottle.
• Before starting the washer, pour measured amount of bleach directly
into bleach dispenser. Avoid splashing or overfilling. Powdered
bleach should be mixed with water before pouring.
Bleach dispenser
NOTE
n Never pour undiluted liquid bleach directly onto clothes or into the wash basket.
This may cause change of color or damage the laundry.
n Do not pour powdered bleach into bleach dispenser.
Before Starting to Wash
13
U
se of Water, Detergent, Bleach and Softener
Using Fabric Softener
Dilute fabric softener with water.
Undiluted fabric softener may result in spots that look like oil stains.
Measure and add the recommended amount of fabric softener into the
compartment marked with this symbol (
).
Follow manufacturer's direction.
Fabric softener is automatically
dispensed in the final rinse.
Softener dispenser (
)
Do not overfill. The dispenser holds a maximum of 35ml.
Never add more than 35ml.
Overfilling can cause early dispensing of the fabric softener
which could result in stained clothes. A cup with a pouring spout will
help you avoid spilling.
The effect of adding fabric softener may vary according to its viscosity. The stickier fabric softener makes its
effect the lower. For a sticky fabric softener it is recommended that it be diluted with water, then be manually
put during the time when the washer beeps several times before the final rinse. This function informing
correct time to dispense manually is optionally applied to some models. Please keep it in mind that fabric
softener has to be diluted with water before dispensed and never poured directly on clothes.
Attention
Do not mix with detergent or bleach.
Never pour fabric softener directly on clothes. It may stain them.
Do not stop the washer during the first spin for timely dispensing.
Option washing is not designed to be used with fabric softener dispenser.
Scrud(Waxy Build up)
Scrud is the name given to the waxy build-up that can occur within any washer when the fabric softener
comes into contact with detergent. This build-up is not brought about by a fault in the machine.
If scrud is allowed to build-up in the machine it can result in stains on your clothes or an unpleasant
smell in your washer.
If you wish to use fabric softener we recommend
Using fabric softener sparingly.
When filling the dispenser, do not splash or overfill.
Clean dispenser as soon as the cycle is finished.
Clean your machine regularly.
Cold water washing increases the chance of this build-up occurring. We recommend a regular warm or hot
wash e.g. every 5th wash should be at least a warm one.
Fabric softener of thinner consistency is less likely to leave residue on the dispenser and contribute to a
build-up.
14
Before Starting to Wash
S
pecial Guide for Stain Removal
For successful stain removal:
• Remove stains promptly.
• Determine the kind of stain, then follow the recommended treatment in the stain
removal chart below.
• To pretreat stains, use a prewash product, liquid Detergent, or a paste made from
granular Detergent and water.
• Use COLD water on unknown stains because HOT water can set stains.
• Check care label instructions for treatments to avoid on specific fabrics.
Follow fabric care label
• Check for colorfastness by testing stain remover on an inside seam.
instructions
• Rinse and wash items after stain removal.
Stain Removal
STAIN
Adhesive tape, chewing gum,
rubber cement
TREATMENT
Apply ice. Scrape off excess. Place stain face down on paper towels. Saturate with prewash stain remover or
nonflammable dry cleaning fluid.
Baby formula, dairy products, egg Use product containing enzymes to pretreat or soak stains.
Beverages (coffee, tea, soda, juice, Pretreat stain. Wash using COLD water and bleach safe for fabric.
alcoholic beverages)
Rinse with COLD water. Rub with bar soap. Or pretreat or soak with product containing enzymes. Wash using
Blood
bleach safe for fabric.
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is absorbed.
Candle wax, crayon
Replace paper towels frequently. Treat remaining stain with prewash stain remover or nonflammable dry cleaning
fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Chocolate
Pretreat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.
Collar or cuff soil, cosmetics
Pretreat with prewash stain remover or rub with bar soap.
Dye transfer on white fabric
Use packaged color remover. Wash using bleach safe for fabric.
Grass
Pretreat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.
Grease, oil, tar (butter, fats, salad
dressing, cooking oils, car grease,
motor oils)
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply
nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly. Wash
using hottest water safe for fabric.
Ink
Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover, denatured
alcohol or nonflammable dry cleaning fluid.
Mildew, scorch
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and HOT water before washing. Badly
mildewed fabrics may be permanently damaged.
Mud
Brush off dry mud. Pretreat or soak with product containing enzymes.
Mustard, tomato
Pretreat with prewash stain remover. Wash using bleach safe for fabric.
Nail polish
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of stain.
Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
Paint, varnish
WATER BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed.
OIL BASED & VARNISH : Use solvent recommended on can label. Rinse thoroughly before washing.
Rust, brown or yellow
discoloration
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate Detergent and
nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
Shoe polish
LIQUID : Pretreat with a paste of granular Detergent and water. PASTE : Scrape residue from fabric. Pretreat with
prewash stain remover or nonflammable dry cleaning fluid. Rub Detergent into dampened area, Wash using bleach
safe for fabric.
Before Starting to Wash
15
Applicable for : WF-T7512FN
16
Before Starting to Wash
Before Starting to Wash
17
Applicable for : WF-T7062DN, WF-N6861DN, WF-N7035DN, WF-N7036DN,
WF-N7065DN, WF-N7066DN, WF-N6866DN, WF-N6836DN
T70CSA13N, T70CBA13P
18
Before Starting to Wash
Before Starting to Wash
19
AUTO OFF
AUTO OFF
PROGRAM
AUTO OFF
PROGRAM
AUTO OFF
PROGRAM
AUTO OFF
PROGRAM
20
Washing Programs
PROCESS
START
PAUSE
START
PAUSE
START
PAUSE
START
PAUSE
START
PAUSE
Washing Programs
21
W
ashing Process
START
PAUSE
AUTO OFF
PROGRAM
PROCESS
START
PAUSE
AUTO OFF
PROCESS
START
PAUSE
AUTO OFF
PROCESS
START
PAUSE
AUTO OFF
PROCESS
AUTO OFF
PROCESS
22
WATER LAVEL
PROGRAM
XL
L
M
S
PROGRAM
Washing Process
PROCESS
START
PAUSE
Washing Process
23
F
unction Options
AUTO OFF
PROCESS
DELAY START
PROGRAM
PROGRAM
PROCESS
START
PAUSE
PROCESS
PROGRAM
WATER LAVEL
PROCESS
START
PAUSE
24
Additional Features
START
PAUSE
WATER LAVEL
Additional Features
25
C
leaning and Maintenance
When the water supply is bad, check substances like stone or sand in the filter.
If the filter is clogged with dirt, water cannot flow into the washer. Clean the filter regularly.
Cleaning the filter in the inlet valve
Before cleaning the filter in the inlet valve, completely remove the water remaining in the water hose.
1
l Turn off the water tap and put on the power
2
Switch off the washer and disconnect the power
cord.
switch.
l Select cold & hot water and press
START/PAUSE
. button. Let the washer operate
for 5 seconds
3
Disconnect water hose, and remove filter from
the inlet valve by hand or with tools. Remove
dirt with a tooth brush and clean in water.
l Then insert it back into the water inlet.
Cleaning the lint filter
1
Press and then pull forward
the lint filter from the washing
tub to the arrow direction.
2
Turn inside out and wash it to
remove dirt.
3
Insert it back into same
place and push until click
sound heard.
Push
Press & Pull
l When the lint filter is worn out, etc., contact a LG Service Center for a new one.
26
Care and Maintenance
C
leaning and Maintenance
To prevent freezing in winter
1
Close water tap and remove the water
hose. Direct the hose toward the bottom and completely remove water
from the hose.
2
Press the SPIN button and let
it spin for 1 min. to remove
water from the tub and drain
hose.
3
Unplug the power cord.
2
Pour 50°C of hot water inside
the tub and leave it for 10 min.
3
Submerge the separated hose
in 50°C of hot water
When frozen
1
Pour 50°C of hot water on the
water tap and remove the water
hose.
4
Connect the water hose to
the washer and then start
the washer. Pour 50°C of
hot water into the water
hose.
5
Connect the water
hose to the water tap
and check if water
is draining.
Note : n Stainless steel inner tub won’t be rusted.
However, external rust may cling to it in the following causes:
l Metal product(like hairpin,etc,) that can be rusted is left inside the tub for a long time.
l Water with a lot of iron substance is used for a long time.
l Water or chlorine type bleach is left inside the tub for a long time.
n If rust is found, soak sponge or soft cloth with cleaner
(neutral cleaner) and wipe the rust.(Never use metal sponge)
Care and Maintenance
27
G
rounding Method
Earth wire should be connected.
If the earth wire is not connected, there is possible a danger of electric shock caused
by the current leakage .
Grounding Method with Ground insert space Terminal
Ground terminal
If the AC current outlet has a ground terminal, then
separate grounding is not required.
Grounding is
not needed
Concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers
only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's
manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these
conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular
attention to plugs, wall outlets, and the point where the cord exits the appliance.
Other Grounding Method
Burying Copper Plate
Connect the Ground Wire to a Ground Copper
Plate and bury it more than 75cm in the ground.
Ground Wire
75cm
Ground Copper Plate
Using Ground Wire
Connect the ground Wire to the socket provided
exclusively for Grounding.
Ground
Wire
Using a Short Circuit Breaker
If grounding methods described above are not
possible, a separate circuit breaker should be
employed and installed by a qualified electrician
28
Care and Maintenance
Short-circuit
breaker
C
ommon washing problems
Many washing problems involve poor soil & stain removal, residues of lint and
scum, and fabric damage. For satisfactory washing results, follow these
instructions.
WASH PROBLEM
Problems
Possible Causes
Solutions & Preventive Measures
Poor soil
removal
Not enough detergent
Wash water temperature
too low.
Overloading the washer
Incorrect wash cycle
Incorrect sorting
Do not pretreat stain
Use correct amount of detergent for load size, amount of
soil and water hardness.
Reduce load size.
Wash with Jean or Speedy Soak & Jean cycle for
heavy soiled laundry.
Separate heavily soiled items from lightly soiled ones.
Pretreat stain and heavy soil according to directions shown
on page 15.
Blue Stains
Undiluted fabric softener
dispensed directly onto
fabric
Rub the stain with bar soap. Wash.
Do not overfill fabric softener dispenser and do not pour
liquid fabric softener directly onto fabric.
See page 14 for more instructions.
Black or gray
marks on
clothes
A buildup caused by the
interaction of fabric
softener and detergent can
flake off and mark clothes
Not enough detergent
Keep the recommendations against Scrud (waxy buildup).
(refer to scrud page 14.)
Use correct amount of detergent for load size, amount of soil
and water hardness.
Yellow or
brown rust
stains
Iron or manganese in
water supply, water pipes,
or water heater
To restore discolored load of whites, use rust remover safe
for fabric.
Install nonprecipitating water softener or an iron filter in
your water supply system for an ongoing problem.
Before washing, run water for a few minutes to clear lines.
Lint
Incorrect sorting
Tissues left in pocket
Overloading the washer
Wash lint givers eg towels, flannelette sheets, separately
from lint collectors eg synthetic fabrics and remove tissues in
pockets before wash. See page 11 for sorting and caring
before loading.
Do not overload the washer.
Residue or
detergent
Overloading the washer
Undissolved detergent
Use too much detergent
Do not overload the washer.
Some detergents need to be pre-dissolved, check the
detergent instructions. Try pre-dissolving the detergent.
Increase water temperature using hot water safe for fabric.
Use proper amount of detergent.
Holes, tears,
or snags
Incorrect use of chlorine
bleach.
Unfastened zippers,
hooks, buckles
Ribs, tears and broken
threads
Overloading the washer
Degradation of fabric
Never pour chlorine bleach directly on fabric.
See page 13 for adding liquid bleach.
Fasten zippers, hooks, and buckles.
Remove objects in pockets. See page 11 for caring before
loading.
Do not overload the washer.
Troubleshooting
29
T
roubleshooting
If a abnormal symbol appears in the display window,
check the following before calling Customer Service Centre.
SYMPTOM
Turbo
Wash
Rinse
Spin
Abnormal water supply
(At this time, the lamps of
[WASH], [RINSE] blink.)
Turbo
Wash
Rinse
Spin
Is the water pressure
lowered or the filter
clogged?
Is hot water selected when only a cold
water hose is connected to the cold
valve?(In this case, select cold water.)
Is the drain hose lowered?
Is the drain hose bent?
Is the doorsill too high?
Is the drain hose
frozen or chocked?
Is the laundry gathered to one side?
Is the washer tilted?
Opened lid
(At this time, buzzer sounds
without lamp indication)
30
Is the water tap
frozen?
Is water supply
discontinued?
Abnormal spin
(At this time, the lamps of
[WASH], [RINSE], [SPIN]
blink.)
Turbo
Wash
Rinse
Spin
Is the water
tap closed?
Abnormal drainage
(At this time, the lamps of
[RINSE], [SPIN] blink.)
Turbo
Wash
Rinse
Spin
ITEM TO BE CHECKED
Troubleshooting
Is the lid closed? If the lid is open,
alarm is generated and rinse and
spin cannot be proceeded.
Is the lid closed after setting delayed
washing? If the lid is opened, delayed
washing cannot be proceeded.
S
pecifications
Model
(a) WF-T7512FN
(b) WF-T7062DN/WF-N6861DN/WF-N7035DN/WF-N7036DN/WF-N7065DN/WF-N7066DN/WF-N6866DN/
Size
(a) 540(W)x540(D)x885(H)
(b) 540(W)x540(D)x815(H)
Water tap pressure
30 -800 kPa (0.3 -8 kgf /cm 2)
Weight
(a) 32 kg
(b) 30 kg
WF-N6836DN / T70CSA13N / T70CBA13P
In our continuing effort to improve the quality of our appliances, it may be necessary to make changes to the
appliance without revising this manual.
Specifications
31
For any further information, please contact LGEIL Branches
BRANCH
BRANCH OFFICE ADDRESS
Ahmedabad
PHONE NO. / FAX NO.
LGEIL, 233-234, Platinum Plaza, Nr. Judges Bunglow Cross Road, Bodakdev,
Ahmedabad-54
Asansol
LGEIL, Block-E, Ist Floor, P C Chattarjee Market, Rambandhu Tala, GT Road (E)
Asansol-713303
Aurangabad
LGEIL, 302 CIDCO No. 3, Opp. Hotel Ramgiri, Jalna Road, Aurangabad-431003
Bangalore
LGEIL, No. 914, 2nd Floor, Shri Venkateshwara Complex, Opp. IBP Petrol Bunk,
80ft Road, 6th Block, Koramangala - Banglore - 560095
Bhopal
LG Electronics India Private Limited, 2nd Floor, Alankar Complex, Plot No. 10,
M.P. Nagar, Zone-II, Bhopal-462011
Bhubaneshwar LGEIL, Plot No. 02,1st Flr., Bapuji Nagar, Bhubaneshwar-751009
Calcutta
LGEIL, 1, Ho-Chi-Min-Sarani, 6th Floor, Metro Towers, Calcutta-700071
Chandigarh
LGEIL, SCO No. 142-143, 3rd Floor, Sector-34A, Chandigarh-160002
Chennai
LGEIL, AA11, 2nd Avenue, Fatima Tower, Anna Nagar West, Chennai-600040
Cochin
LGEIL, 40/1270, Vasudeva Buildings, T.D. Road, Ernakulam Cochin-682011
Coimbatore
LGEIL, 250A, Sanganur Main Road, Kannappa Nagar, Coimbatore-641027
Delhi
LGEIL, A-27, Mohan Co-operative, Industrial Estate, New Delhi
Dehradun
LGEIL, M-22, Commercial Motors Compound, Mohabewala Indl. Area,
Delhi-Saharanpur Road, Dehradun (Uttarakhand)
Gurgaon
LGEIL, IInd Flr, A Block, Centre Point Bldg, Sushant Lok , Ph-I, Gurgaon-122001
Ghaziabad
LGEIL, J-10, RDC Rajnagar, Ghaziabad - 201001
Guwahati
LGEIL, Shantineer Bhawan, C K Aggarwal Path, Chenikurthi, Guwahati-781003
Hyderabad
LGEIL, 1st Floor, Survey No. 54, Pulla Reddy Building, Vikarampuri,
Main Road, Kharkhana, Secunderabad-500009
Hubli
LGEIL, 1 Floor, Above Bellad & Co., Near Bannigida Busstop, Gokul Road,
Hubli-580030
Indore
LGEIL, 3rd flr., 304 Bansi Trade Centre, 581/5 M.G. Road, Indore-452003
Jaipur
LGEIL, B-71, Sahakar Marg, Lal Kothi Scheme, Jaipur-302015
Jammu
LGEIL, Plot No. 52, Yard No. 6,Transport Nagar, Narwal, Jammu-180006
Jodhpur
LGEIL, 22(1-A)/21(2-B)/2, RIICO Heavy Industrial Area, Jodhpur-342003
Karnal
LG Electronics India Pvt Ltd, Super Tyre Building, Near New Anaj Mandi,
Opp. New World Restauarnt, G.T. Road Karnal, Haryana
Lucknow
LGEIL, B-537, Hari Kunj, Keshav Nagar, Sitapur Road, Lucknow-226020
Ludhiana
LGEIL, Village Jhande, Near Badowal Railway Station,
Opp. Ferozpur Road, Ludhiana.
Mumbai(N & S) LGEIL, Trade Star, 4th Floor, A Wing, J.B. Nagar, Andheri Kurla Road,
Andheri (E) Mumbai-400059
Nagpur
LGEIL, 5A, Road No.13, Behind Msrtc Workshop, MIDC Hinga, Nagpur-440016
Patna
LGEIL, 2nd Floor, Ankit Chandra Deep Complex, Bander Bageecha,
Near Samrat Hotel, Patna-800001.
Pune
LGEIL, 201, 2nd Floor, Plexus Complex, at 134/1, CTS No. 1337/1,
Nr. Parihar Chowk, Aundh, Pune-411 007.
Rajkot
LGEIL, Sanskruti Apartment, Opp. Dr. Ambedkar Bhawan, Near Atithi Chowk,
Akshar Road , Rajkot - 360004
Raipur
613 to 616 , 6th Floor, Offizo, Magneto - The Mall, GE Road,
Raipur - 492001
Ranchi
LGEIL, 402, Commerce Tower, Opp. Gel Church Complex, Main Road, Ranchi
Surat
LGEIL, 1001-1004, Ascon Plaza, IInd Flr, Anand Mahal Road,
Behind Bhulka Bhavan School, Adajan, Surat-395009
Thane
LGEIL, Gall Shop No - 206,207, 2nd Floor, Sai Plaza , Above Vijay Sales
Opp. Cine Wonder Mall, Ghodbunder Road , Thane(West)-400607
Varanasi
LGEIL, Pama Complex, DLW, Lahartara Road, Shivdaspur, Manduadih,
Varanasi, UP-221002
Vijaywada
LGEIL, Door No. 32-2/1-7, Ratnamamba Street, Prajasakti Nagar,
Vijaywada-520010, Andhra Pradesh
Warangal
LGEIL, House No. 1-8-598/1, First Floor, Beside HDFC Bank, Nakkalgutta,
Hanamakonda-506001 (Warangal)
Kozhikode
3/568, Thripuri Building, Wayanadu Road, First Floor,Near K.S.F.E,
East Nadakkavu, Calicut-673011
40040013-14
3292009/3292010 (Fax) 2215170
5625705 / (Fax) 2474055/32095436/32095437/32095438
41145145/41144750/41144751
4262847/4229861 (Fax) 4262848
2531430, 2534280
22883254 (51) Fax
5087389\90 (Fax) 5089107
65510501~04 (Fax) 26203506
2369765,2369743, 2370744, 4027444, 4027555, 2360977 (Fax)
2332197, 2332195
26991412/11/13 (Fax) 26991410
2644213/283
4047461- 62 - 63/4272867, 4047460 (Fax)
9811354152/3/64/65/266
2663895/2666958/2665983/2668984 (Telefax)
27207504, 05, 06/27204094 27201462 (Fax)
4250251/52
4065523~24, 4082157 (Fax)
5111118/5113028/5105392, 5111540 (Fax)
2477420, 2477419, 2474396, 2474384
2742384, 392 / 5120030 (Fax)
2219201,2219202 (Telefax)
2757538,39,2759121 (Fax) 2757559
2804412 - 19
28352882-2887 / 28352889 (Fax)
235120, 235122, Fax : 234401
3298714, 2541845 (Fax)
020 41474100, 41474111 (Fax)
2481499,2467692 (Fax)
4053171/4037470 (Fax) 4038426/10/11
3294026, 2331815
2730982/83, 2730984 (Fax)
25472633/2637
25472602(Fax)
2373432/36/37
2497283/87, (Fax) 2497284
2551453
2366755, 2366756, 2366678, (Fax) 2766678
Email : serviceindia@lge.com
P/No.: 3828EU3034C
LG Electronics
Download PDF