LG | WD-14331AD | LG WD-14331AD Owner’s Manual

P/No.: 3828ER3047P
Washing
Machine
OWNER'S MANUAL
WD-14331(6)AD
WD-12331(6)AD
WD-R8012
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
on safe installation, use and maintenance.
instructions
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Features
More economical
by Intelligent
Wash
System
System detects the amount of load and water temperature, and
then determines the optimum water level and washing time to minimize energy
and water consumption.
Intelligent
Wash
Child-Lock
The child-lock system is to be used for preventing children from
button to change the program during operation.
speed control system
By sensing the amount of load and balance,
the spinning noise level.
pressing
any
Low noise
it
evenly
distributes load to minimize
Auto Restart
Auto Restart allows the program to restart all
It does from the stage where it stopped.
Direct Drive
by
itself in
case
of power failure.
System
The advanced Brushless DC motor rotates the drum
directly without
belt and
pulley.
C
ontents
Warnings....................................................................................3
Installation..................................................................................4
Specifications.............................................................................5
Installation..................................................................................6
Care before
washing................................................................12
Adding detergent
.....................................................................13
Function ...................................................................................14
How to
use
washer ..................................................................15
Maintenance ............................................................................24
Troubleshooting guide
Terms of
2
.............................................................27
Warranty ...................................................................30
W arnings
READ ALL INSTRUCTIONS BEFORE USE
WARNING!
!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
?
Do not install
be
?
?
or
or injury to persons when using
precautions, including the following:
store the washer where it will
?
to the weather.
exposed
Do not tamper with controls.
Do not repair or replace any part of the
washer
attempt any servicing unless specifically
recommended in the user-maintenance
or
instructions
or
?
lint, paper, rags, chemicals, etc.
Close supervision is necessary if this
appliances is used by or near children
?
?
or
?
on
Never reach into washer while it is
Wait until the drum has
?
?
hang
The
laundry process
retardant of fabrics.
moving.
completely stopped.
can
or
try
to
To minimize the
possibility of electric shock,
unplug this appliance from the power supply
disconnect the washer at the household
distribution
Keep washer away from fire.
Do not leave the washer door open.
An open door could entice children to
the door or crawl inside the washer.
care
Do not slam the washer door closed
or
.
?
(such as wax, oil, paint, gasoline, degreasers,
dry-cleaning solvents, kerosene, etc.) which
may ignite or explode.
To avoid such a result, carefully follow the
force the door open when locked. This could
result in damage to the washer.
infirm persons. Do not allow them to play on,
with, or inside this or any other appliance
?
dry articles that have been
instructions.
Keep the area underneath and around your
appliances free of combustible materials such
as
?
or
garment manufacturer's wash and
published user-repair
instructions that you understand and have the
skills to carry out.
?
Do not wash
cleaned in, washed in, soaked in, or spotted
with combustible or explosive substances
?
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
dryer is intend only for drying textile material
in water.
reduce the flame
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
This
appliance
must be
of electric shock
?
?
If you don't have the proper
outlet, consult
an
electrician.
WARNING : Improper connection of the equipment-grounding conductor can result in risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided
proper outlet installed by a qualified electrician.
with the
appliance
-
if it does not fit the
outlet, have
3
a
I
nstallation
To minimize the risk of fire in
?
Items that have been
a
tumble
hazard and should not be
Oil-affected items
sources
Such
as
can
in
a
dryer,
soaked with
spotted
placed
or
in
a
tumble
the
following
vegetable
dryer.
or
should be observed:
cooking
oil constitute
ignite spontaneously, especially when exposed
dryer. The items become warm, causing
tumble
a
fire
to heat
an
oxidation
reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can
become hot enought to catch fire. Piling, stacking or storing oil-affected items can
prevent heat from escaping and
so
create a fire hazard.
If it is unavoidable that fabrics that contain
vegetable or cooking oil or have been
products be placed in a tumble dryer they should first be
washed in hot water with extra detergent-this will reduce, but not eliminate, the
hazard. Washed in hot water with extra detergent-this will reduce, but not
eliminate, the hazard. The 'cool down' cycle of tumble dryers should be used to
reduce the temperature of the items. They should not be removed from the tumble
dryer or piled or stacked while hot.
contaminated
?
?
by
hair
care
Items that have been previously cleaned in, washed in, soaked in or spotted with
petro/gasoline, dry-cleaning solvents or other flammable or explosive substances
should not be placed in a tumble dryer.
Highly flammable substances commonly used in domestic environments include
acetone, denatured alcohol, petrol/gasoline, kerosene, spot removers (some
brands), turpentine, waxes and was removers.
Items
containing
foam rubber
foam) or similarly testured
dryer on a heat setting.
heated, produce fire by spontaneous combustion.
(also
known
as
rubber. like materials should not be dried in
Foam rubber materials can, when
?
Fabric softeners
a
latex
tumble
products should not be used in a tumble dryer to eliminate
electricity unless this practice is specifically recommended by the
the fabric softener or product.
or
similar
the effects of static
manufacturer of
?
Undergarments
dryer.
that contain metal reinforcements should not be
placed
Damage to the tumble dryer can result if metal reinforcements come
drying. When available a drying rack could be used for such items.
?
Plastic articles such
be
?
placed
in
a
as
tumble
shower caps
or
babies
waterproof napkin
loose
covers
a
tumble
during
should not
dryer.
Rubber-backed articles, clothes fitted with foam rubber pads,
rubber-coated tennis shoes should not be placed in a tumble
4
in
pillows, galoshes
dryer.
and
S pecifications
Name
:
Front
:
220-240V~,50 Hz
Size
:
600mm(W)
Weight
:61kg
Power
Wash
supply
capacity/Max.
Dry capacity/Max.
Water
Watt
Watt
consumption
loading washing
x
:
8
kg (2100W)
:
4
kg (1350W)
550mm(D)
:
154ℓ(19.3ℓ/ kg)
Permissible water pressure
:
0.3-10
Spin speed
:
No
No
The appearance and
machine
x
850mm(H)
kgf/㎠ (30-1000 kPa)
Spin/400/600/800/1000/1200/1400 [WD-14331(6)AD]
Spin/400/600/800/1000/1200
[WD-12331(6)AD, WD-R8012]
specifications
may be varied without notice to raise the units
quality.
Accessories
Inlet
hose(1EA)
Option
:
Hot/Cold(2EA)
Spanner
5
nstallation
I
Install
or store where it will not be exposed to temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other vermin,
pay particular attention to keeping the appliance and its surroundings in clean condition at all times.
Any damage which may be cause by cockroaches or other vermin will not be covered by the appliance
guarantee.
Transit bolts
The
?
appliance is fitted
with transit bolts to
prevent internal damage during transport.
and all transit bolts must
Packing
be removed before
using
the
washer.
Washer
When
sure
the base, be
the additional
unpacking
to
remove
packing support in the
of the base packing.
Removing
middle
Packing Support
Base
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are
locked. Before operating the washer,
remove
(Packing support may not
be used depending on
models.)
Packing
the bolts
along
3. Take out the 4 bolts
along with the
bungs by slightly twisting the
bung. Keep the 4 bolts and the
rubber
spanner for future
with the rubber
use.
bungs.
?
If
they are not removed, it may cause
heavy vibration, noise and malfunction.
2. Unscrew the 4 bolts with
the spanner
6
supplied.
?
Whenever the
appliance is transported,
the transit bolts must be refitted.
4. Close the holes with the caps
supplied.
I
nstallation
Installation place requirement
Level floor
Drain Hose
Allowable
Washer
:
slope
Power outlet
under entire washer is 1˚
:
Must be within 1.5 meters of either side of
location of washer. Do not overload the outlet
with
Laundry
Tub
more
than
one
appliance.
Additional Clearance
approx.
2cm
For wall, door and floor
(10cm
: rear
Do not
place
/2cm:right
or
store
:
modeling is required.
side)
& left
laundry products
washer at any times.
They can damage the finish
or
on
top of
controls.
Positioning
Install the washer on a flat hard floor.
Make sure that air circulation around the washer is not
?
?
?
?
?
Never try to correct any
washer.
unevenness
in the floor with
impeded by carpets,rug etc.
pieces of wood, cardboard or
similar materials under the
If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an insulating(85x60cm)
covered with aluminum foil on the side facing the cooker or stove,must be inserted between the two appliances.
The washer must not be installed in rooms where the temperature can drop below 0°C.
Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of
a
breakdown.
With the washer installed adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable,
and a clearance of approximately 20mm is left between the top of the washer and the underside of the work-top.
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This appliance must be earthed
Green and
Yellow(Earth)
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E
or by the earth symbol
or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If
a
13 amp
(BS 1363) plug
is used, fit
a
13 amp BS 1362 fuse.
7
nstallation
I
Electrical connection
1. Do not
2. If the
use an
extension cord
supply cord
is
or
damaged,
double
adapter.
replaced by the manufacturer or its service agents
it must be
person in order to avoid a hazard.
3. Always unplug the machine and turn off the water
4. Connect the machine to
supply after
or
similarly qualified
use.
earthed socket in accordance with current
wiring regulations.
appliance must be positioned so that the plug is easily accessible.
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by inexperienced persons
may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses may burst under
pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing machine at room
temperature for a few hours before putting it into operation.
an
5. The
?
?
?
CAUTION
CAUTION
concerning
the Power Cord
Most
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
Washing
Machine is to be connected to the water mains
using
new
hose-sets and that old
hose-sets should not be used.
Connecting water supply
hose
Water supply pressure must be between 30kPa and 1000kPa
(0.3~10kgf/cm)
Don't strip or crossthread when connecting Inlet hose to the
2
valve.
?
Hose connector
?
Rubber seal
?
Hot water
tap
?
Cold
Cold
Hot(option)
water
tap
?
If the water supply pressure is more than 1000kPa, a
decompression device should be installed.
Two rubber seals are supplied with the water inlet hoses
these are in order to prevent water leaks.
Check water tightness of washing machine connections
by turning the tap completely on.
Periodically check the condition of the hose and replace
the hose if necessary.
Make sure that there is no kink on the hose and that it is
not crushed.
When your washer has two valves,
The Inlet hose which has red connector is for the hot
water
?
8
tap.
If the washer has two valves, the energy is saved
using hot valve.
by
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
screw
2. Push the
rubber
with
type inlet hose
connector up till the
packing is
3. Push the
water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
in
tight contact
the tap. Then tighten the 4
screws.
Normal Tap without thread &
1. Untighten the upper
connector
screw.
Upper
Rubber
Connector
Fixing
screw
packing
one
touch type inlet hose
2. Push the upper connector up till 3. Connect the water supply hose
the rubber packing is in tight
to the middle connector,
contact with the tap. Then
pushing the plate down.
tighten the 4 screws.
Middle
Rubber
connector
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the tap is
the guide plate.
Connector
Water
Middle
remove
Guide
hose
connector
plate
?
Turn the middle connector not
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
supply
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose connector
Rubber seal
Used the horizontal
Horizontal tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension tap
Make
sure
that there
are no
kinks in the hose and that it is
not crushed.
Square tap
9
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
stopcock if the machine is to be left for any length of time (e.g. holiday),
especially if there is no floor drain(gully) in the immediate vicinity.
When disposing of the appliance, cut off the mains cable, and destroy the Plug.
Disable the door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a
Turn off the
risk
of suffocation !
Keep
all
packaging
well away from children
Installation of drain hose
?
When
installing the drain hose to a sink,
it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
secure
?
?
The drain hose should not be
than 100
?
cm
Proper securing of the
damage
the floor from
?
placed higher
above the floor.
drain hose will protect
due to water
When the drain hose is too
long,
back into the washer. This will
leakage.
do not force
cause
abnormal
noise, malfunction, and water leakage.
10
I
nstallation
Level
adjustment
1.
Adjusting
the
washing
machine level
properly prevents
excessive
noise and vibration.
Install the
in
appliance
a corner
NOTE
of the
Timber
on a
solid and level floor surface,
preferably
room.
or
suspended type flooring
excessive vibration
or
load balance
may contribute to
errors.
2. If the floor is uneven,
adjust the adjustable
not insert
of wood etc. under the
feet
as required.
feet)
Make sure that all four feet are stable and resting on the floor and
then check that the appliance is perfectly level. (use a spirit level)
After the washer is level, tighten the lock nuts up towards of the base
of the washer. All lock nuts must be tightened.
(do
NOTE
pieces
In the
case
platform,
that the
washing machine is installed
securely fastened in order
risk that it might fall off.
on a
raised
it must be
to eliminate the
Diagonal Check
When pushing down the edges of the washing machine top plate
diagonally, the machine should not move up and down at all.
(Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally,
adjust the feet again.
Concrete floors
?
The installation surface
?
Install washer
?
Position each foot
Tile floors
on a
must
be
clean, dry and level.
flat hard floor.
(Slippery floors)
on
sections and stick the
Tread Mate is
a
the Tread Mate and level the machine
pieces
on
to
the
dry
(Cut Tread
to suit.
tile where machine is
to
be
Mate into 70x70
placed.)
self adhesive material used on ladders & steps that prevents
slipping.
Rubber
Wooden floors
?
?
(Suspended floors)
Wooden floors are particularly susceptible to vibration.
To prevent vibration we recommend you place rubber cups
at
?
If
least 15mm thick under the
possible
install the washer in
washer, secured
one
of the
to at
corners
Insert the rubber cups to reduce vibration.
Rubber cups ( p/no. 4620ER4002B ) can be
?
?
?
?
?
under each
foot,
least 2 floor beams with
of the
room,
Cup
can be
purchased from
hardware suppliers.
It
screws.
where the floor is
purchasedfrom
mm
more
stable.
the LG spare parts
department.
Important!
Proper placement and levelling of the washer ensures long, regular and reliable operation.
The washer must be absolutely horizontal and stand firmly in position.
It must not "Seesaw" across corners under load.
The installation surface must be clean, free from floor wax and other lubricant coatings.
Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
11
C
are
before
Before the first
Select
washing
washing
cycle (COTTON 60°C,
clothing.
a
without
This will
remove
add
a
half load of
detergent)
allow the unit to wash
residues from the drum that may have been left
during manufacturing.
Caring before washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
get the best results, Sort clothes into loads that can be washed with the same wash
cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer can occur causing discoloration of white etc. If possible, do not wash heavily
soiled items with lightly soiled one.
To
Soil
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Color
Lint
3.
Caring
before
Separate clothes according to amount of soil.
Separate white fabrics from colored fabrics.
Wash lint producers and lint collectors
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all pockets to make sure
they are empty. Items such
that
as
nails, hair clip, matches, pens,
coins and
keys
can
damage
both
your washer and your clothes.
?
Close zippers, hooks and strings to
make sure that these items don't
snag
?
on
other clothes.
Pre treat dirt and stains
a
little
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help shift dirt.
12
A dding detergent
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
?
The
dosage
to the
detergent
the
of
detergent manufactrurers.
should be used according
instruction
?
max
If too
much
can occur
detergent is used, too many suds
and this will decrease the washing
or cause heavy load to the
(Causing a malfunction)
result
?
?
If there are too many suds,
quantity must be reduced.
Use
the
motor.
detergent
specified Front loader washing powder
only.
?
Main wash
only
?
?PreWash+MainWash
2.
hardness, size and soil level of the load.
For best results, avoid oversudsing.
Adding Fabric Softener
()
Detergent usage may need to be
adjusted for water temperature, water
MAX
MAX
125 ml
125 ml
Tips
?
Full load
according
:
to
manufacturer's
recommendation.
?
Do not exceed the maximum fill line.
Overfilling
can cause
early dispensing
?
Part load
?
Minimum load
:
3/4 of the normal amount.
:
1/2 of full load.
of the fabric softener which could stain
clothes.
?
?
Do not leave the fabric softener in the
detergent drawer for more than
(Fabric softener could harden)
?
2
Detergent is flushed from the dispenser
beginning of the cycle.
at the
days.
Softener will automatically be added
the last rinse cycle.
during
?
The soap drawer can be partially
opened to add pre dissolved soap
powder during the initial fill.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
directly
on
the clothes
13
unction
F
Recommended
(
)
:
WD-12331(6)AD,
Fabric
Program
according
courses
First check if
to the
WD-R8012
Proper
Temp.
(Option)
Type
95˚C
(30°C, 40°C,
60°C-Eco)
laundry easily
damaged.
30˚C
(Cold, 40˚C)
If the
:
Program setting
4.0kg
80
3.0kg
52
2.0kg
50
2.0kg
44
4.0kg
30
Rinse Hold
(30˚C)
30˚C
soiled.
Select the water temperature to the wash cycles.
Always follow garment manufacture's care label or instructions
when
Intensive
Intensive
laundry
is
laundering.
heavily
with "Intensive"
soiled "Intensive"
option
option
is effective.
for test in accordance
or
in
conformity
with
EN60456 and IEC 60456.
Pre Wash
:
If the
laundry
is
heavily soiled,
"Pre Wash" Cotton is recommended.
Pre Wash is available in Cotton and
14
103
(100)
Rinse +
Cold
Quick 30 Coloured fast laundary
:
Dry
(Cold, 40˚C)
"Hand Wash" marked
delicate and wool laundry.
Temperature
Rating
30˚C
Delicate
lightly
Rinse +
Pre Wash
(30˚C,60˚C)
Wool/Silk Machine washable woolens
with pure new wool only.
Water
140
(137)
Rinse Hold
40˚C
Synthetic Polyamide, Acrylic,
Polyester.
which is
Rating
60˚C
(shirts, night dresses,
pajamas...)and lightly soiled
white cotton(underwear...)
Hand
Wash
in
Minutes
Intensive
Colour fast gaments
Delicate
Load
linen towel
(white cotton,
and sheets...)
Time
Maximum
Option
is
laundry
machine washable.
Cotton
laundry type
Synthetic Program.
ow
H
1. Cotton
to
use
washer
?
?
?
2. Manual
automatically
selected upon power
Press the
Power(
) button
Press the
Start/Pause(
to start.
) button.
?
?
Initial conditions
-
Wash
:
main wash
-
Rinse
:
3 times
Spin
1400 rpm
-
:
1200 rpm
-
-
Press the
Power(
) button
to start.
Select the conditions which you want to
use, by turning the program dial and
pressing
each button.
selecting the each conditions, please
refer to the page16~page23
For
[WD-14331(6)AD]
[WD-12331(6)AD, WD-R8012]
Water temperature
Selecting
on.
:
?
Press the
Start/Pause(
) button.
60˚C
Program : Cotton
15
H
(1)
(2)
(3)
(4)
ow
to
use
washer
Dial : Program
Button : Start / Pause
Button
Button
:
:
(5)
(6)
(7)
(8)
Intensive
Rinse Hold
+
Button
Button
:
Button
Button
:
Dry
:
Child Lock
:
Rinse
Pre Wash
(9) Button : Power
(10) Button : Spin
(11) Button : Time Delay
Option
?
By pressing the
Option button,
all Option
functions may
be selected.
-
-
Intensive
Rinse Hold
-
Rinse +
-
Pre Wash
-
?
If the
laundry is heavily
option is effective.
By selecting
?
?
?
?
2. Rinse Hold
Is selected by pressing the Rinse Hold button
this function leaves clothes in the machine;
suspended in the water after a rinse without
entering
?
into
spin.
To proceed to a Drain or Spin function after a
Rinse hold, select Drain on the program dial or
press the Spin selector button to the desired
speed, then press the Start/Pause button.
16
laundry
is
heavily soiled,
course
is effective.
Pre Wash is available in Cotton and
Synthetic.
5.
?
?
?
If the
"Pre Wash"
soiled "Intensive"
option, the wash
depending on the
Rinse + function, the rinse
time and the rinse water are increased.
By selecting
4. Pre Wash
the Intensive
time may be extended,
program selected.
For additional rinse which may assist in
traces of detergent residue.
removing
Dry
1. Intensive
?
3. Rinse+
?
Dry
When you want to
dry,
select this button.
Available in Cotton and
Please note that the
Synthetic.
drying capacity
is
kg. Please remove excess clothes from
the completed wash before comencing
the drying and ensure that the cold water
4
tap is left
The
on.
required lamp
will light up for identification.
H
ow
to
use
washer
Spin
[WD-12331(6)AD, WD-R8012]
[WD-14331(6)AD]
?
By pressing the Spin button, the spin
speed can be chosen and the LED of
is turned
1. Spin selection
rpm
on.
?
Spin Speed
the program
?
is available
as
according
to
follows.
WD-14331(6)AD
Cotton, Rinse+Spin, Quick 30
-
NoSpin-400-600800-1000-1200-1400
Synthetic, Wool/Silk, Hand Wash
NoSpin-400-600-800-1000
-
Spin only:
Delicate
-
1. Press the Power buton.
2. Set the desired
the
Spin
spin speed by pressing
NoSpin-400-600-800
?
button.
WD-12331(6)AD,
WD-R8012
Cotton, Rinse+Spin, Quick 30
-
3. Press the Start/Pause button.
NoSpin-400-600-8001000
-
1200
Synthetic, Wool/Silk, Hand Wash
NoSpin-400-600-800-1000
-
Delicate
-
NoSpin-400-600-800
2. No spin
?
If
no
after
spin is selected,
draining water.
the washer stops
17
H
ow
to
use
washer
Child Lock
Water Temp.
If you choose to lock
the buttons on the
control
assembly
to
prevent tampering this
function may be
selected.
1. Child Lock
?
Child Lock
Rinse
?
By turning
the
temperature
-
Program Dial,
can
the water
+
can
be set
by pressing
simultaneously. (About
be selected.
the
button and Pre Wash button
three
seconds)
Cold
-30˚C/40˚C/60˚C/95˚C
?
Water temperature can be selected
according to the program.
?
The
required temperature lamp
for identification.
For the
more
detailed
refer to
the page14.
will
light up
?
information, please
When child lock is set, all buttons
are
locked
except for power button.
To deactivate Child Lock system, press
Rinse + and Pre Wash buttons
simultaneously again. (About three seconds)
?
To
change
to the desired program, whilst
in child lock mode.
1. Press both Rinse + and Pre Wash
once
together
again. (About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button
?
18
again.
The child lock can be set at any time and
it is automatically canceled when
operational errors occur. Also Child Lock
works when power is off.
H
to
ow
use
washer
Dry
The drying capacity for this model
is 4 kg. Please remove
approprate excess weight before
NOTE
commencing
This
?
drying cycle.
to
sensors measures
dry
most
the
faster reaction time and
easily.
most even drying
sure
all articles in the
are
similar in
Do not overload
dryer by
too many articles
into drum. Items must be
able to tumble
If you open door and
dryer has finished its
freely.
remove
cycle,
load before
remember to
press the Start/Pause button.
the DRY button, you
can
tighter
temperature control.
,
stuffing
By pressing
Cycles
selected
material and thickness.
?
guide
temperature of the exhaust to increase
or decrease drying temperatures for
make
?
Use your Automatic
loads.
Electronic
washer-dryer's
clothes load
?
?
Automatic
automatical process from
washing to drying can be
For
?
the
1.Drying
?
Recommand Automatic
clothes type.
a) For Synthetics select
b)
c)
d)
drying
-
Low
course
for
Temp.
If you want to iron clothes-Less.
For Cottons select Normal
-
For washable
nappies select More
NOTE: The estimated drying time varies
from the actual drying time with an
-
Automatic. The type of fabric, size of the
load, and the dryness selected, do affect
the
drying
times.
select
Normal
Low
Temp.
More
Time
Less
19
ow
H
to
washer
use
Dry
2.Drying
Fiber
guide
time
-
?
?
press the Dry button, the
can be selected.
By
Drying
drying
time
Baby
last up to 150min.
course can
Always
When
selecting drying only, drying
will start after spining. (The
spinning time is about 19~22min.)
-
or
Leather Materials
check the manufacture's instructions.
clothes and
Night
Gowns
Always check the manufacture's instructions.
course
?
These
to
drying
times
given
dryer for
are
you set your
as a
Rubber and Plastics
guide
manual
help
drying. Drying times can vary greatly
depending on dampness, room
-
experience
will be your best
guide.
Woolen Articles
-
Fiber
dry woolen articles. Pull them
their original shape and dry them flat.
Do not tumble
Woven and
-
Some
woven
and
Loopknit
to
Materials
loopknit materials may
shrinks, by varying amounts, depending
on
their
quality.
-
Always stretch them
drying.
out
immediately after
Permanent Press and
-
-
Do not overload your
Synthetics
dryer
Take out permanent press articles
dryer stops to reduce wrinkles.
the
20
dry any items made from
plastics, such as:
or
containing
or
a) aprons, bibs, chair covers
b) curtains and table cloths
c) bathmats
temperature and type of fabric and your
own
Do not
rubber
as soon as
-
glass
dry fiberglass articles in your dryer.
particles left in the dryer could be
picked up by your clothes the next time
you use the dryer and irri tate your skin.
Do not
Glass
H
to
ow
use
Time
1. Time
washer
Program
Delay
Delay
Preparing washing before starting
"Time Delay"
Turn on the water tap.
Load laundry and close the door.
Place the detergent and fabric softener
-
-
?
-
?
?
How to set "Time
-
-
-
Delay"
Program
?
Press the Start/Pause button.
If Time
Delay button is pressed, "3:00"
displayed. The maximum delayed time
is
is 19 hours and the minimum time is
3 hours.
?
Each
on
?
according
to the
Lamp
will
light
When Start/Pause button is
the Cotton program is
selected.
-
pressing of the button
delay by one hour.
advances
time
delay,
press the
pressed,
automatically
By turning the Program dial, the
program is selected in order of
Cotton
Delicate
Quick 30
"
-
-
Rinse+Spin
To cancel the time
up to indicate selected
1. Program
(":" blinks.)
?
available
dial to select
the program you require.
Press Time Delay button and set the
desired time.
-
are
program.
Press Power button.
Turn the
8 programs
laundry type.
in the drawer.
Wool/Silk
-
-
Drain
-
-
Hand Wash
Synthetic".
For
information regarding laundary type
for each program, please refer to page 14.
Power button.
?
Time
cycle or
Spin).
?
'expected time' from the
completion of washing
selected process (Wash, Rinse,
Delay
present
is
to the
According to
the condition
-
of water supply
and temperature, the delayed time and the
actual washing time may vary.
21
ow
H
to
use
washer
Power
Start/Pause
1. Start
?
1. Power
This Start/Pause button is used to start
wash
cycle
or
pause the wash
?
Press the Power button to turn power
on
and off
cycle.
?
To cancel the Time
Delay function,
pressed.
the
power button should be
2. Pause
?
?
?
2. Initial Program
If temporary stop of wash cycle is
needed, press the Start/Pause button.
?
or
at the end of the wash
pressed,
ready
follows.
?
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause
button and then the washer will proceed.
cycle.
Initial program
[WD-14331(6)AD]
-
Door Lock
Cotton
Program / Main Wash /
Normal Rinse / 1400 rpm / 60˚C
[WD-12331(6)AD, WD-R8012]
-
Cotton
Program / Main Wash /
Normal Rinse / 1200 rpm / 60˚C
?
Lights
whenever the door of the washer is
locked.
?
The door
can
be unlocked
by pressing
the
Start/Pause button to stop the washer.
?
The door
22
can
be
opened
after
a
short
delay.
the
for Cotton program.
And the other initial conditions as
When in Pause, the power is turned off
automatically after 4 minutes.
NB. The door will not open before 1 to 2
minutes when Pause is selected,
When the Power button is
washer is
H
ow
to
washer
use
Display
3. Completion of
?
When
washing cycle is completed,
is displayed.
"
1. Special function
?
"
?
?
"
delay is selected, it shows
remaining time to finish the selected
When time
the
"
4. Time left
display
When child lock is selected, the
is displayed.
?
During washing cycle, the remaining
washing time is displayed.
Recommended program
manufacturer.
(
program.
-
) : WD-12331(6)AD,
Cotton 95˚C
-
diagnosis display
?
If the machine encounters
operation,
displayed.
a
fault
during
"
"
"
"
"
"
-
"
"
"
"
"
:
Water pressure
:
Problem of
:
Door is not closed
:
Water inlet trouble
sensing
overfilling
error
-
water
Drainage
:
Unbalanced load
-
-
:
Water temperature trouble
:
Over load in motor
-
?
"
"
"
"
"
"
"
"
:
Dry
heater
or
thermostat
trouble.
If these error letters are displayed, please
refer to the troubleshooting page29 and
follow the guide.
minutes
:
43(40)
minutes
:
Delicate
around 52 minutes
:
Wool/Silk
:
around 50 minutes
Hand Wash
:
Quick 30
:
around 30 minutes
Rinse+
Spin
Drain
around 1 minute
:
:
around
21(18)
minutes
The
washing time may vary by the
laundry, water pressure,
water temperature and other washing
amount of
conditions.
Over load in motor
:
20(17)
around 44 minutes
trouble
:
Synthetic
WD-R8012
around 1 hour and 20 minutes
the associated fault will be
-
"
Cotton 60˚C
around 1 hour and
-
by
:
around 2 hours and
2. Self
washing
?
If
an
unbalanced load is detected
or
the suds
if
removing program operates,
the wash time may be extended.
(Max. increasing time is 45 minutes.)
23
M
aintenance
Before
the electrical power cord to avoid electrical
cleaning the washer interior, unplug
shock to avoid electrical shock hazards.
When
of the appliance, cut off the mains cable, and destroy the plug Disable the
prevent young children being trapped inside.
disposing
door lock to
The water inlet filter
"
-"
error
detergent
-
message will blink
If your water is very hard
become
on
the control
panel
when water does not enter the
drawer.
clogged.
a good
It is therefore
or
contains traces of lime
deposit,
the water inlet filter may
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the
CAUTION
filter is clean to
tangled
Be careful when
laundry.
running of your machine.
using "Drain" program and
or foreign objects.
draining if the water is hot.
or
opening
Open the lower cover
cap( )byusinga
coin. Drain plug ( )
to pull out the hose.
the door in
2.
then open the pump filter to
threads
Allow the water to cool down before
1.
left in the
smooth
First drain the water
remove
emptying
objects
ensure
an
cleaning
the drain pump,
Unplug
plug ( ),
allowing the water to flow out.
water
use a
flowing
out emergency
emergency.
3. Remove any
the drain
this time
carrying
At
vessel to prevent
on
to the floor. When
foreign
from the pump filter
cleaning,
cover
cap.
100
3
1
2
24
3
( )
)to the original place.
plug (
close the lower
)
After
clockwise and insert the drain
the pump filter
(
( ).
turn the pump filter
water does not flow any more, turn
open to the left.
material
2
aintenance
M
Dispenser
After
?
?
?
a
while
drawer
and fabric softeners leave
detergents
It should be cleaned from time to time with
a
jet
of
a
deposit
running
If necessary it can be removed completely from the machine
downwards and by pulling it out.
To facilitate
cleaning,
in the drawer.
water.
by pressing
the upper part of the fabric softener compartment
the catch
can
be removed.
max
max
The drawer
recess
Detergent can also accumulate inside the recess
be cleaned occasionally with an old toothbrush.
?
Once you have finished cleaning,
rinse cycle without laundry.
The
?
washing
replace
?
?
the drawer and
run a
drum
If you live in a hard water area, limescale may
seen and thus not easily removed.
Over time the build up of scale clogs
maintenance or repairs may result.
?
which should
continuously
appliances,
build up in
and if it is not
metal articles
washing drum is made of Stainless steel, specks
(paper clips, safety pins) which have been left in
The
drum should be cleaned from time to time.
Although
the
washing
If you
use
descaling agents, dyes
or
bleaches, make
sure
they
kept
places
in check,
of rust
can
where it cannot be
expensive
be caused
by
small
the drum.
are
suitable for
washing
machine
use.
Descaler may contain chemicals that may
Remove any spots with
Never
use
a
stainless steel
damage part of your washing
machine.
cleaning agent.
steel wool.
25
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
detergent.
Immediately wipe off any spills. Wipe
Try
water and a neutral non abrasive
warm
not to hit surface with
IMPORTANT: Do not
with
damp cloth.
sharp objects.
use
methylated spirits, diluents
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer
through
a
complete cycle using hot
Repeat
process if necessary.
NOTE
Remove hard water
water.
deposits using only
cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing
electrical cord into
1gallon(3.8L)
a
supply and drain
water from hoses.
properly grounded electrical outlet.
of nontoxic recreational
vehicle(RV) antifreeze
into
an
empty wash drum.
Close the door.
5. Set
spin cycle and let washer spin for 1minute
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
remove
through
26
a
expelled.
dry the drum interior, and close the door.
dispenser drawer drain and dry excessive
8. Store washer in
9. To
to drain out all water.
an
water from the
compartments.
uprignt position.
antifreeze from washer after storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
T roubleshooting guide
This washing machine is equipped with automatic
early stage and react appropriately.
When the machine does not function
you contact your service provider.
properly or does
not function at
detect and
?
diagnose faults at an
all, check the following points before
Possible Cause
Symptom
Rattling and
clanking noise
safety functions which
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
sound
?
Heavy wash loads
thumping sound.
a
may produce
This is usually
normal.
Vibrating
noise
?
?
out of balance.
If not removed
been removed?
Are all the feet
the
probably
Stop
and
redistribute wash load.
Have all the transit bolts and
packing
If sound continues, washer is
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe. Contact plumber
if necessary.
Too much
detergent or unsuitable
detergent may cause excessive
foaming which may result in water
leaks, and vibration during spin.
Oversudsing
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another tap in the house.
area.
?
?
?
Water
supply tap
completely open.
Water inlet
Fully
is not
hose(s)
are
The filter of the inlet
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
?
?
drains
slowly.
Drain hose is kinked
or
clogged.
Clean and
straighten
the drain hose.
or
The drain filter is
clogged.
Clean the drain filter
27
T roubleshooting guide
Possible Cause
Symptom
Washer does not start
Electrical power cord may not
plugged in or connection
?
be
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,or
a
power
outage has occurred.
If
problem
is
a
replace fuse.
capacity.
or
circuit overload, have
it corrected
?
Water
supply tap
is not turned
Turn
by a qualified electrician.
on water supply tap.
on.
Washer will not
Check that the door is
spin
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Once started, the door can not be
for safety reasons.
Door does not open
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other usage conditions.
If the imbalance is detected or if the
suds removing program works, the
wash time shall be increased.
Dry problem
?
Does not
dry
Do not overload.
Check that the washer is
properly to
extract
draining
adequate water
from the load.
Clothes load is too small to tumble
property. Add
28
a
few towels.
T roubleshooting guide
Possible Cause
Symptom
?
?
?
?
Water
Water
supply is not adequate in area
supply taps are not completely
open.
Water inlet
hose(s)
are
The filter of the inlet
kinked.
hose(s)
are
Solution
Check another tap in the house.
Fully open tap.
Straighten hose(s).
Check the filter of the inlet hose(s).
clogged.
?
?
?
?
?
Drain hose is kinked
Clean and
The drain filter is
Clean the drain filter.
or clogged.
clogged.
straighten the drain
Load is too small.
Add 1
Load is out of balance.
balance the load.
The
Rearrange
spinning
appliance
has
an
unbalance
detection and correction system. If
individual heavy articles are loaded
or
2 similar items to
hose.
help
load to allow proper
(ex.
etc.), this system
may stop spinning or even interrupt the
spin cycle altogether.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and repeat
the spin cycle.
bath mat, both robe,
?
?
Is the door
or
not
opend
completely
Close the door
If
"
completely.
"is not released, call for service.
closed?
Unplug the
?
Water overfills due to the
faulty water
valve.
power
plug
and call for service.
Close the water tap.
Unplug the power plug.
Call for service.
?
?
?
?
Water level
sensor
has malfunctioned.
Over load in motor.
Over load in motor.
Check water
supply.
Turn the tap on
If"
is not released,
plug and call service.
"
unplug
power
29
of Warranty
erms
T
What Is Not Covered:
Service
?
If the
?
?
?
trips
to your home to teach you how to use the
product
is connected to any
voltage
product.
other than that shown
If the fault is caused
by accident, neglect, misuse
If the fault is caused
by
or
on
the
rating plate.
Act of God.
factors other than normal domestic
use or use
in accordance
with the owner's manual.
Provide instruction
?
on use
If the fault is caused
?
Noise
?
or
sound,
product
pests for
or
change
example,
or
product.
example
water drain
the installation for
example, levelling
by
the
product, adjustment
inlet hose
Replace
?
foreign objects / substances from the machine, including
filter for example, grit, nails, bra wires, buttons etc.
fuses in
or
correct house
Correction of unauthorized
?
Incidental
?
with this
If this
or
correct house
plumbing.
to
personal property
caused
by possible
commercial purpose, it is not warranted.
such as public bathroom, lodging house,
defects
training center,
If the product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
30
the pump and
repairs.
consequential damage
appliance.
or
product is used for
(Example : Public places
dormitory)
?
wiring
of drain.
the owner's manual.
Removal of
?
sound, spin
warming beeps.
Normal maintenance which recommended
?
the set-up of the
rats or cockroaches etc..
vibration that is considered normal for
Correcting
?
by
of
of
a
Download PDF

advertising