LG | WD-16346FD | LG WD-16346FD Owner’s Manual

P/No.: 3828ER3053U
Washing
Machine
OWNER'S MANUAL
WD-16346FD
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
on safe installation, use and maintenance.
instructions
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Features
Jumbo drum
LG's
jumbo
drum
machines. A
can
wash about 40%
bigger drum improves
More economical
more
the wash
load than conventional
washing
performance.
by Intelligent Wash System
Wash
Intelligent
System detects the amount of load and water temperature, and
then determines the optimum water level and washing time to minimize energy and
water
consumption.
Child-Lock
The child-lock system is to be used for preventing children from
button to change the program during operation.
Low noise
pressing
any
speed control system
By sensing the amount of load and balance, it
the spinning noise level.
evenly distributes
load to minimize
Auto Restart
Auto Restart allows the program to restart all
It does from the stage where it stopped.
Direct Drive
by
itself in
case
of power failure.
System
The advanced Brushless DC motor rotates the drum
directly without
belt and
pulley.
Water circulation
Spray detergent solution and water onto the load over and over. Clothes are
more quickly and thoroughly during wash cycle. The detergent suds can be
removed more easily by the water shower during rinse cycle. The water circulation
system uses both water and detergent more efficiently.
soaked
C
ontents
Warnings....................................................................................3
Specifications.............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent .....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide .............................................................24
Terms of Warranty ...................................................................27
2
W arnings
READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE
WARNING!
!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
?
or injury
precautions, including the following:
Before installation, check exterior
If it
damages.
has,
Do not wash
Do not install
be
?
?
exposed
or
store the washer where it will
to the weather.
Do not tamper with controls.
repair or replace any part of the washer
attempt any servicing unless specifically
?
Do not slam the washer door closed or try to force
the door open when locked. This could result in
damage to the washer.
?
When the machine
recommended in the user-maintenance instructions
published user-repair instructions that you
understand and have the skills to carry out.
Keep the area underneath and around your
or
?
appliances free of combustible materials such
lint, paper, rags, chemicals,
?
as
?
?
?
?
any other appliance.
Keep washer away from fire.
Do not leave the washer door open.
An open door could entice children to
door or crawl inside the washer.
hang
on
the
Never reach into washer while it is moving. Wait
until the drum has completely stopped.
The
laundry process
can
reduce the flame retardant
To avoid such
a
result, carefully follow the garment
manufacturer's wash and
care
runs high temperature, the front
door may be very hot. Don't touch it.
To minimize the possibility of electric shock, unplug
this appliance from the power supply or disconnect
the washer at the household distribution
Close supervision is necessary if this appliance is
used by or near children or infirm persons.
Do not allow them to play on, with, or inside this
of fabrics.
?
?
etc.
or
?
or
in, washed in, soaked in,
Do not
or
using
dry articles that have been cleaned
or spotted with
combustible or explosive substances (such as wax,
oil, paint, gasoline, degreasers, dry-cleaning
solvents, kerosene, etc.) which may ignite or
explode.
?
do not install.
?
to persons when
?
?
panel by
removing the fuse or switching off the circuit breaker
before attempting any maintenance or cleaning.
When unplugging power cord, do not pull out by
grasping the cord. Otherwise, the power cord may
be damaged.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially disassembled, or
has missing or broken parts, including a damaged
cord or plug.
Before discarding an old machine unplug it. Render
the plug useless. Cut off the cable directly behind
the appliance to prevent misuse.
instructions.
Do not push down the door excessively, when washer door open.
This could topple over the washer.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
or breakdown, grounding will reduce the risk of electric shock by providing a path
appliance is equipped with a cord having an equipment-grounding conductor and grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
This
appliance must be grounded.
In the event of malfunction
of least resistance for electric current. This
?
?
If you don't have the proper
WARNING :
outlet, consult
Improper connection
qualified electrician or serviceman
the plug provided with the appliance
a
-
of the
an
electrician.
equipment-grounding conductor can result in risk of electric shock. Check with
as to whether the appliance is properly grounded. Do not modify
outlet, have a proper outlet installed by a qualified electrician.
if you are in doubt
if it does not fit the
3
S pecifications
Name
Power
supply
Size
Weight
/ Max.Watt
:
Front
:
220-240 V~,50 Hz
:
600mm(W)
loading washing
600mm(D)
x
850mm(H)
:65kg/2100W
Wash
capacity
:8kg
Water
consumption
:49
Permissible water pressure
:
0.3-10
Spin speed
:
No
The appearance and
x
machine
2
kgf/cm (30-1000 kPa)
spin/400/600/800/1000/1200/1400/1600
specifications
may be varied without notice to raise the units
Accessories
Spanner
4
quality.
nstallation
I
or store where it will not be
exposed to temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other vermin,
pay particular attention to keeping the appliance and its surroundings in clean condition at all times.
Any damage which may be cause by cockroaches or other vermin will not be covered by the appliance
Install
guarantee.
Transit bolts
The
?
appliance is fitted
with transit bolts to
prevent internal damage during transport.
and all transit bolts must
Packing
be removed before
using
the
washer.
Washer
When
sure
the base, be
the additional
unpacking
to
remove
packing support in the
of the base packing.
Removing
middle
Packing Support
Base
(Packing support may not
be used depending on
models.)
Packing
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are
locked. Before operating the washer,
3. Take out the 4 bolts
along with the
bungs by slightly twisting the
bung. Keep the 4 bolts and the
rubber
spanner for future
remove
the bolts
?
along
with the rubber
If
they are not removed, it may cause
heavy vibration, noise and malfunction.
2. Unscrew the 4 bolts with
the spanner
use.
bungs.
?
Whenever the
appliance is transported,
the transit bolts must be refitted.
4. Close the holes with the caps
supplied.
supplied.
5
nstallation
I
Installation place requirement
Level floor
Drain Hose
Washer
:
slope under entire washer is 1˚
Allowable
Power outlet
:
Must be within 1.5 meters of either side of location of
washer. Do not overload the outlet with
more
than
one
appliance.
Laundry
Tub
Additional Clearance
approx.
:
For wall, door and floor modeling is
(10cm : rear / 2cm: right & left side)
2cm
Do not
place
or
store
required.
laundry products
on
top of washer
at
any times.
They
damage the finish
can
or
controls.
Positioning
Install the washer
Make
?
?
?
?
on a
flat hard floor.
that air circulation around the washer is not
Never try to correct any
under the washer.
unevenness
in the floor with
impeded by carpets,rug etc.
pieces of wood, cardboard or similar materials
If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an
insulating(85x60cm) covered with aluminum foil on the side facing the cooker or stove,must be
inserted between the two appliance.
The washer must not be installed in rooms where the temperature can drop below 0°C.
Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of
a
?
sure
breakdown.
With the washer installed
adjust all four feet using the transit bolt spanner provided ensuring the
appliance is stable, and a clearance of approximately 20mm is left between the top of the washer and
the underside of the work-top.
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
Green and
appliance
Yellow(Earth)
must be earthed
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this apparatus may not
identifying the terminals in your plug, proceed as follows:
correspond
with the coloured
markings
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
letter E or by the earth symbol
or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.
6
I
nstallation
Electrical connection
1. Do not
use an extension cord or double adapter.
supply cord is damaged, it must be replaced by the manufacturer or its service agents
similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply after use.
Connect the machine to an earthed socket in accordance with current wiring regulations.
The appliance must be positioned so that the plug is easily accessible.
2. If the
3.
4.
5.
?
?
?
or
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses
may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below
freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing
machine at room temperature for a few hours before putting it into operation.
CAUTION
CAUTION
concerning
the Power Cord
Most
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
Washing
Machine is to be connected to the water mains
using
new
hose-sets and that old
hose-sets should not be used.
Connecting water supply
hose
▶Water supply pressure
must
be between 30kPa and 1000kPa
2
(0.3~10kgf/cm)
▶Don't strip or crossthread when connecting Inlet hose to the valve.
▶If the water supply pressure is more than 1000kPa, a decompression
device should be installed.
?
Two rubber seals
are
?
?
Hose connector
?
in order to
are
supplied
prevent
with the water inlet hoses these
water leaks.
Check water tightness of washing machine connections by
turning the tap completely on.
Periodically check the condition of the hose and replace the hose
if necessary.
Make sure that there is
no
kink
on
the hose and that it is not
crushed.
Rubber seal
▶When your washer has two valves.
The Inlet hose which has red connector is for the hot water tap.
If the washer has two valves, the energy is saved by using hot
?
?
valve.
7
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
screw
2. Push the
rubber
with
type inlet hose
connector up till the
packing is
3.
in
tight contact
the tap. Then tighten the 4
screws.
Normal Tap without thread &
1. Untighten the upper
connector
screw.
one
touch type inlet hose
2. Push the upper connector up till
the rubber packing is in tight
contact with the
Upper
Rubber
Connector
Fixing
screw
tighten the
packing
Middle
Rubber
connector
Push the water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
3. Connect the
water
supply hose
to the middle connector,
tap. Then
pushing the plate down.
4 screws.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the tap is
the guide plate.
Connector
Water
Middle
remove
Guide
hose
connector
plate
?
Turn the middle connector not
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
supply
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose connector
Rubber seal
Used the horizontal
Horizontal tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension tap
Make
sure
that there
not crushed.
Square tap
8
are no
kinks in the hose and that it is
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
stopcock if the machine is to be left for any length of time (e.g. holiday),
especially if there is no floor drain(gully) in the immediate vicinity.
When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the
door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk
Turn off the
of suffocation !
Keep
all
packaging
well away from children
Installation of drain hose
?
When
installing the drain hose sink,
it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
secure
?
?
?
?
The drain hose should not be
placed
higher than 100 cm above the floor.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
When the drain hose is too long, do
not force back into the washer. This
will
cause
abnormal noise.
9
I
nstallation
Level
adjustment
1.
Adjusting
the
washing
machine level
properly prevents
excessive
noise and vibration.
Install the
corner
appliance
of the
Timber
NOTE
on a
solid and level floor surface,
or
suspended type flooring
excessive vibration and unblance
2. If the floor is uneven,
insert
pieces
Make
sure
that all four feet
In the
case
platform,
stable and
are
is
may contribute to
feet
as
required. (do
perfectly
not
resting on the floor and
(use a spirit level)
level.
the lock nuts up towards
the washer. All lock nuts must be
NOTE
a
errors.
adjust the adjustable
feet)
appliance
washer is level, tighten
After the
in
of wood etc. under the
then check that the
※
preferably
room.
of the
base
of
tightened.
that the
washing machine is installed
securely fastened in order
risk that it might fall off.
on a
raised
it must be
to eliminate the
Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the machine
should not move up and down at all. (Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
Concrete floors
?
The installation surface
?
Install washer
Tile floors
on a
on
sections and stick the
Tread Mate is
※
be
clean, dry and level.
(Slippery floors)
Position each foot
?
must
flat hard floor.
a
the Tread Mate and level the machine
pieces
on
to
the
dry tile where
to suit.
machine is
to
(Cut Tread
be
Mate into 70x70
placed.)
self adhesive material used on ladders & steps that prevents
Wooden floors
slipping.
(Suspended floors)
Rubber
Cup
Wooden floors are particularly susceptible to vibration.
To prevent vibration we recommend you place rubber cups under each foot,
at least 15mm thick under the washer, secured to at least 2 floor beams with screws.
If possible install the washer in one of the corners of the room, where the floor is more stable.
?
?
?
※
Insert the rubber cups to reduce vibration.
※
You
?
?
can
obtain the rubber cups
(p/no.4620ER4002B) from
the LG spares
dept.
Important!
Proper placement and levelling of the washer ensure long,regular and reliable operation.
The washer must be absolutely horizontal and stand firmly in position.
?
It must not "Seesaw"
?
The installation surface
?
Do not let the feet of the
10
across corners
must
be
under load.
clean, free from floor wax and other lubricant coatings.
washer get wet. If feet of the washer get wet,
slipping
may
occur.
mm
C
are
before
Before the first
Select
washing
washing
cycle (COTTON 60°C, add
clothing.
a
without
This will
remove
a
half load of
allow the unit to wash
detergent)
residues from the drum that may have been left
during manufacturing.
Caring before washing
1. Care Labels
Look for
a care
2.
on your clothes. This will tell you about the fabric content of your
it should be washed.
label
garment and how
Sorting
To
get the best results, Sort clothes into loads that
can
be washed with the
same
wash
cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer
Soil
3.
causing discoloration of white
lightly soiled one.
can occur
soiled items with
Color
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Separate
Separate
Lint
Wash lint
Caring
before
etc. If
possible, do
clothes
according
not wash
heavily
to amount of soil.
white fabrics from colored fabrics.
producers and
separately.
lint collectors
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all pockets to make sure
they are empty. Items such
that
as
nails, hair clip, matches, pens,
coins and
keys
can
damage
both
your washer and your clothes.
?
Close zippers, hooks and strings to
make sure that these items don't
snag
?
on
other clothes.
Pre treat dirt and stains
a
little
by brushing
detergent dissolved in water
onto stains like collars and cuffs to
help shift dirt.
11
A dding detergent
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
The
?
dosage
should be used
detergent
according to the
the
of
detergent manufactrurers.
instruction
If too much detergent
?
max
is used
recommended amount,
too
heavy load to
(Causing malfunctions)
result
washing
the
motor.
Detergent usage may need to be
adjusted for water temperature, water
?
only
hardness, size and soil level of the load.
For best results, avoid oversudsing.
?PreWash+MainWash
2.
or cause
can
Use powder detergent only for the front
loading washer.
?
Main wash
than the
many suds
and this will decrease the
occur
?
more
Adding Fabric Softener
4. Water softener
()
?
MAX
MAX
125 ml
125 ml
?
can cause
softener, such
used to cut down
on
as
the
Calgon can be
of detergent
use
in extremely hard water areas. Dispense
according to the amount specified on the
packaging. First add detergent and then
Do not exceed the maximum fill line.
Overfilling
A water
early dispensing
the water softener.
of the fabric softener which could stain
?
clothes.
?
Do not leave the fabric softener in the
detergent drawer for more than
(Fabric softener could harden)
?
?
2
?
12
for soft
Full load
according
:
to
recommendation.
?
Part load
?
Minimum load
:
3/4 of the normal amount.
:
1/2 of full load.
not
allowable.
NOTE
as
manufacturer's
Do not open the drawer when water is
are
quantity of detergent
Tips
Softener will automatically be added
during the last rinse cycle.
Solvents(benzene, etc)
a
days.
supplied.
?
Use
water.
Do not pour fabric softener
directly on the clothes
?
Detergent is flushed from the dispenser
beginning of the cycle.
at the
F
unction
Recommended
courses
according
Fabric
to the
Maximum
Proper
Program
Option
Type
First check if
(shirts, night dresses,
pajamas...)and lightly
soiled white
laundry easily
damaged
Wool/Silk woolens with pure
new wool or silk only
"Hand Wash" marked
delicate and wool
is
Laundry which
lightly soiled
fast.
30˚C
(40˚C,
Cold)
(40˚C,
Cold)
Cold
(30˚C)
laundry
Colored
40˚C,
30˚C
Machine washable
Quick 30
(30˚C,
(30˚C,
60˚C)
Delicate
Wash
60˚C
40˚C
Polyamide, Acryic,
Polyester
Hand
95˚C
60˚C-Eco)
cotton(underwear...)
Delicate
Time
in
in
kWh
Minutes
Intensive
Rinse +
Pre Wash
Rating
2.74
123
Rating
1.09
106
0.45
80
0.41
52
0.28
50
0.03
44
0.35
30
Crease Care
Color fast gaments
Synthetic
Energy
Rinse Hold
laundry
(white cotton, linen
towel and sheets...)
Cotton
Load
Temp.
is machine washable.
Intensive
laundry types
30˚C
Rinse Hold
Intensive
Rinse +
Pre Wash
Crease Care
Rinse Hold
Intensive
Rinse +
Pre Wash
Less than
3.5
kg
Crease Care
Rinse Hold
Intensive
Rinse +
Crease Care
Rinse Hold
Intensive
Rinse +
Less than
3.0
kg
Less than
2.0
kg
Crease Care
Rinse Hold
Intensive
Rinse +
Crease Care
Rinse Hold
Rinse +
Crease Care
Less than
2.0
kg
Less than
2.0
kg
If the
laundry is heavily soiled "Intensive" option is effective.
option for test in accordance or in conformity with EN60456 and IEC 60456.
Rinse+: Used to introduce an additional rinse, which may assist in removing traces of detergent residue.
Pre Wash : If the laundry is heavily soiled, "Pre Wash" course is recommended. Pre Wash is available in Cotton
and Synthetic Program.
:
Program setting
Crease Care
:
with "Intensive"
If you want to
prevent
crease, select Crease Care button.
13
ow
H
1. Cotton
to
use
washer
?
?
?
2. Manual
automatically
selected upon power
Press the
Power(
) button
Press the
Start/Pause(
to start.
) button.
?
?
Initial conditions
-
Wash
:
main wash
-
Rinse
:
3 times
-
-
-
Press the
Power(
) button
to start.
Select the conditions which you want to
use, by turning the program dial and
pressing
each button.
For
selecting the each conditions, please
refer to the page15~page20
Spin : 1600 rpm
Water temperature
Selecting
on.
?
:
Press the
60˚C
Start/Pause(
) button.
Program : Cotton
How to select the
Read the
1.
following
language
instructions when you want to
When the power is off, press the time
delay button and power button
2.
change
the
language
Turn the program dial to
select the language.
simultaneously.
3.
The
language is
finally selected by
pressing the spin
button.
14
4. Power will be off
5. Confirm the selected
automatically, after
language after power
changing language.
again.
on
H
(1)
(2)
(3)
(4)
ow
to
use
washer
Dial : Program
Button : Start / Pause
Button
Button
:
:
(5)
(6)
(7)
(8)
Intensive
Rinse Hold
Button
Button
:
Button
Button
:
:
:
+
Rinse
Pre Wash
(9) Button : Power
(10) Button : Spin
(11) Button : Time Delay
Crease Care
Child Lock
Option
By pressing the
Option button,
all Option
?
functions may
be selected.
-
Intensive
-
-
Rinse Hold
-
Rinse +
-
?
?
Crease Care
soiled "Intensive"
?
This
Option
the Intensive
option, the wash
extended, depending on the
laundry
?
is
heavily soiled,
is effective.
course
Pre Wash is available in Cotton and
Synthetic.
5. Crease Care
2. Rinse Hold
Is selected
If the
is not available with Quick 30
program.
?
Rinse + function, the rinse
time and the rinse water are increased.
By selecting
"Pre Wash"
time may be
program selected.
?
For additional rinse which may assist in
removing traces of detergent residue.
4. Pre Wash
If the laundry is heavily
option is effective.
By selecting
?
Pre Wash
1. Intensive
?
3. Rinse+
?
by pressing
If you want to prevent crease, select this
button with spin speed.
the Rinse Hold
button this function leaves clothes in the
machine; suspended in the water after
rinse without
?
To
entering
proceed through
into
a
spin.
The
required lamp
will
light up for identification.
to a drain or
spin, once
the rinse hold function is completed using to
program dial scroll to the required program.
15
H
ow
to
use
washer
Spin(
)
(400--600--800--1000--1200--1400--1600)
?
By pressing the Spin button,
speed can be chosen.
the
spin
Spin only:
1. Press the Power buton.
2. Set the desired
pressing
the
spin speed by
Spin button.
3. Press the Start/Pause button.
1. Spin selection
?
is available
Spin Speed
the program
-
as
2.Nospin(
according
to
follows.
NoSpin-400-600-
-
-
1000
-
1200- 1400
-
1600
Synthetic, Wool/Silk, Hand Wash
No Spin -400-600-800-1000
Delicate
NoSpin-400-600-800
16
If
no
after
Cotton, Rinse+Spin, Quick 30
800
?
)
spin is selected,
draining water.
the washer stops
H
ow
to
use
washer
Child Lock
Water Temp.
If you choose to lock
the buttons on the
control
assembly
to
prevent tampering this
function may be
selected.
1. Child Lock
?
Child Lock
Rinse
?
By turning
the
temperature
-
the water
Program Dial,
can
+
can
be set
by pressing
simultaneously. (About
be selected.
the
button and Pre Wash button
three
seconds)
Cold
-30˚C/40˚C/60˚C/95˚C
?
Water temperature can be selected
according to the program.
?
The
required temperature lamp
for identification.
For the
more
refer to
the
detailed
will
light up
?
information, please
When child lock is set, all buttons
except for power button.
?
locked
To deactivate Child Lock system, press
Rinse + and Pre Wash buttons
simultaneously again. (About
page13.
are
To
change
three
seconds)
to the desired program, whilst
in child lock mode.
1. Press both Rinse + and Pre Wash
once
together
again. (About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button
?
again.
The child lock can be set at any time and
it is automatically canceled when
operational errors occur. Also Child Lock
works when power is off.
17
H
to
ow
Time
1. Time
washer
use
Delay (
Program
)
Delay
Preparing washing before starting
"Time Delay"
Turn on the water tap.
-
-
-
Load
laundry and close the door.
detergent and fabric softener
Place the
?
?
?
How to set "Time
-
-
Delay"
Turn the
Program
dial to select
?
the program you require.
Press Time Delay button and set the
?
?
Press the Start/Pause button.
If Time
is
Delay button is pressed, "3:00"
displayed. The maximum delayed time
?
pressing of the button
delay by one hour.
advances
time
To cancel the time
Time
delay,
press the
'expected time' from the
completion of washing
selected process (Wash, Rinse,
Delay
cycle or
Spin).
is
to the
According to
the condition
of water supply
and temperature, the delayed time and the
actual washing time may vary.
18
to the
When Start/Pause button is
-
pressed,
automatically
By turning the Program dial, the
program is selected in order of
Cotton
Delicate
Quick 30
"
-
-
Wool/Silk
Each
according
up to indicate selected
light
3 hours.
present
?
will
Rinse+Spin
Power button.
?
Lamp
is 19 hours and the minimum time is
on
available
the Cotton program is
selected.
desired time.
-
are
program.
Press Power button.
-
8 programs
laundry type.
in the drawer.
Regarding to
-
-
-
-
Hand Wash
Synthetic".
the
program Please
Drain
laundry type for each
refer to the page13.
-
ow
H
to
use
washer
Power
Start/Pause
1. Start
?
1. Power
This Start/Pause button is used to start
wash
cycle
or
pause the wash
?
?
2. Pause
?
?
?
To cancel the Time
Delay function,
pressed.
the
When in Pause, the power is turned off
automatically after 4 minutes.
2. Initial Program
?
cycle.
the
pressed,
for Cotton program.
And the other initial conditions as
NB. The door will not open before 1 to 2
minutes when Pause is selected,
at the end of the wash
When the Power button is
washer is
ready
follows.
?
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause
button and then the washer will proceed.
3. Door Lock
Initial program
-
?
Lights
whenever the door of the washer is
locked.
?
?
The door
can
be unlocked
by pressing
Cotton
Program
/ Main wash /
Normal Rinse / 1600 rpm / 60˚C
the
Start/Pause button to stop the washer.
The door can be opened after a short delay.
4. Detecting
Detecting
?
While the
load
"Detecting" is shown in the display
slowly and detects how
the machine rotates
many laundries are loaded in the drum.
It will take a few seconds.
?
Available in
on
power button should be
If temporary stop of wash cycle is
needed, press the Start/Pause button.
or
Press the Power button to turn power
and off
cycle.
Cotton, Cotton-Eco.
19
ow
H
to
washer
use
Display
3. Completion of
?
When
washing cycle is completed,
is displayed on the "Multi
display".
"
1. Special function
?
When Child lock is selected, the
"
?
display
"
is
displayed.
delay is selected, it shows
remaining time to finish the selected
"
4. Time left
?
When time
the
washing
?
program.
During washing cycle, the remaining
washing time is displayed.
Recommended program
-
Cotton 95˚C
by
manufacturer.
:
around 2 hours and 3 minutes
2. Self
?
diagnosis display
If the washer encounters
a
fault
operation, the associated fault
displayed.
-
"
during
-
will be
-
"
:
Water pressure
:
Problem of
:
Water temperature trouble
"
"
"
sensing
overfilling
error
-
water
-
-
-
"
"
:
Over load in motor
?
"
"
:
"
"
Over load in motor
Door open
No water
"
Door is not closed
:
supply.
"
:
Water inlet
trouble
"
"
Not
No
draining
spining
"
:
"
:
Drainage
trouble
Unbalanced load
If these error letters are displayed, please
refer to the troubleshooting page26 and
follow the guide.
20
:
around 1 hour and 46 minutes
-
"
Cotton 60˚C
?
Synthetic
around 1 hour and 20 minutes
:
Delicate : around 52 minutes
Wool/Silk
:
Hand Wash
around 50 minutes
:
around 44 minutes
Quick 30 around 30 minutes
:
Rinse+Spin
Drain
:
:
around 24 minutes
around 1 minute
The
washing time may vary by the amount of
laundry, water pressure, water temperature
and other washing conditions.
If
an
unbalanced load is detected
or
if the suds
removing program operates, the wash time
may be extended.
(Max. increasing time
is 45
minutes.)
M
aintenance
Before
cleaning the washer interior, unplug the
electrical power cord to avoid electrical
shock to avoid electrical shock hazards.
When
of the appliance, cut off the mains cable, and destroy the plug Disable the
prevent young children being trapped inside.
disposing
door lock to
The water inlet filter
-
the
-
"
"No water
supply. error
detergent drawer.
If your water is very hard
become
clogged.
a good
It is therefore
or
message will blink
on
the control
contains traces of lime
deposit,
panel
when water does not enter
the water inlet filter may
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
regularly that the filter
CAUTION
is clean to
1.
left in the
smooth
laundry.
running of your
machine.
First drain using "Drain" program and then open the pump filter to
whatever any threads or objects.
Be careful when draining if the water is hot.
Allow the water to cool down before
emptying
objects
ensure
or
opening
Open the lower cover
cap ( ) by using a
coin. Drain plug ( )
to pull out the hose.
the door in
2.
an
cleaning
the drain pump,
plug ( ),
Unplug
allowing
the water to flow out. At
this time
use a
flowing
out emergency
emergency.
the drain
water
carrying
remove
vessel to prevent
on
to the floor. When
3. Remove any
foreign
from the pump filter
cleaning,
After
( )
clockwise and insert the drain
)to
the
plug (
the pump filter
close the lower
( )
( ).
turn the pump filter
water does not flow any more, turn
open to the left.
material
original place.
cover
cap.
100
2
1
2
3
3
21
aintenance
M
Dispenser
After
?
?
?
a
while
drawer
detergents
and fabric softeners leave
It should be cleaned from time to time with
a
jet
of
a
deposit
running
If necessary it can be removed completely from the machine
downwards and by pulling it out.
To facilitate
cleaning,
in the drawer.
water.
by pressing
the upper part of the fabric softener compartment
the catch
can
be removed.
max
max
The drawer
Detergent
can
be cleaned
?
with
occasionally
washing
?
?
recess
which should
old toothbrush.
replace
the drawer and
run a
drum
If you live in a hard water area, limescale may
seen and thus not easily removed.
Over time the build up of scale
be replaced.
?
an
Once you have finished cleaning,
rinse cycle without laundry.
The
?
recess
also accumulate inside the
continuously
clogs appliances,
build up in
and if it is not
kept
places where
in check these may have to
metal articles
washing drum is made of Stainless steel, specks of rust can
(paper clips, safety pins) which have been left in the drum.
The
drum should be cleaned from time to time.
Although
the
washing
If you
use
descaling agents, dyes
or
bleaches, make
sure
they
are
be caused
suitable for
Remove any spots with
Never
22
use
steel wool.
a
stainless steel
damage part
of your
cleaning agent.
washing
by
washing
use.
Descaler may contain chemicals that may
it cannot be
machine.
small
machine
aintenance
M
The water circulation nozzle
?
Clean the water circulation nozzle, if
Cleaning
clogged.
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
detergent.
Immediately wipe off any spills. Wipe
Try
water and a neutral non abrasive
warm
not to hit surface with
IMPORTANT: Do not
with
damp cloth.
sharp objects.
methylated spirits, diluents
use
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer
through a complete cycle using hot
Repeat process if necessary.
Remove hard water
NOTE
water.
deposits using only
cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
freezing
may
occur or
temperatures, follow these instructions to prevent damage
1. Turn off water
Plug
4. Add
freezing
supply tap.
2. Disconnect hoses from water
3.
moved in
to the washer:
electrical cord into
1gallon(3.8L)
a
supply and drain
water from hoses.
properly grounded electrical outlet.
of nontoxic recreational
vehicle(RV) antifreeze
into
an
empty wash drum.
Close the door.
5. Set
spin cycle and let washer spin for 1minute
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
remove
through
a
expelled.
dry the drum interior, and close the door.
dispenser drawer drain and dry excessive
8. Store washer in
9. To
to drain out all water.
an
water from the
compartments.
uprignt position.
antifreeze from washer after storage,
complete cycle using detergent. Do
run
empty washer
not add wash load.
23
T roubleshooting guide
washing machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
This
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
sound
?
Heavy wash loads
thumping sound.
a
may produce
This is usually
normal.
Vibrating
noise
?
?
out of balance.
If not removed
been removed?
Are all the feet
the
probably
Stop
and
redistribute wash load.
Have all the transit bolts and
packing
If sound continues, washer is
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe. Contact plumber
if necessary.
Too much
detergent or unsuitable
detergent may cause excessive
foaming which may result in water
Oversudsing
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another tap in the house.
area.
?
?
?
Water
supply tap
completely open.
Water inlet
is not
hose(s)
are
The filter of the inlet
Fully
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
?
?
drains
24
slowly.
Drain hose is kinked
or
clogged.
or
The drain filter is
clogged.
Clean and
straighten
Clean the drain filter
the drain hose.
T roubleshooting guide
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,or a
power
outage has occurred.
If
problem
is
a
replace
capacity.
or
fuse.
circuit overload, have
it corrected
?
Water
supply tap
is not turned
Turn
on
by a qualified electrician.
water supply tap.
on.
Washer will not
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other usage conditions.
If the imbalance is detected or if the
suds removing program works, the
wash time shall be increased.
25
T roubleshooting guide
Possible Cause
Symptom
?
No water
supply
Read Owner's manual
?
Water
Water
supply is not adequate in area
supply taps are not completely
open.
?
?
Not
draining.
Read Owner's manual
?
?
?
UE
?
Read Owner's manual
?
No
Water inlet
hose(s)
are
hose(s)
Drain hose is kinked
or
The drain filter is
are
clogged.
clogged.
clogged.
Read Owner's manual
?
Fully open tap.
Check the filter of the inlet
Clean and
straighten the
Add 1
Load is out of balance.
balance the load.
The
Rearrange
spinning
appliance has an unbalance detection
system. If individual heavy
articles are loaded (ex. bath mat, both
robe, etc.), this system may stop spinning
or even interrupt the spin cycle altogether.
If the laundry is still too wet at the end of
the cycle, add smaller articles of laundry to
balance the load and repeat the spin cycle.
hose(s).
drain hose.
Clean the drain filter.
Load is too small.
and correction
spining.
Check another tap in the house.
Straighten hose(s).
kinked.
The filter of the inlet
Solution
or
2 similar items to
help
load to allow proper
Close the door.
Door open
?
Is the door
opened?
If "Door
Close the door.
Open" is not released,
for service.
tE
Unplug the
Read Owner's manual
service.
FE
?
PE
?
Read Owner's manual
CE
Water overfills due to the
?
Water level
sensor
Over load in motor.
LE
?
26
Over load in motor.
has malfunctioned.
plug
Close the water tap.
Unplug the power
Call for service.
Read Owner's manual
Read Owner's manual
faulty water
valve.
Read Owner's manual
power
plug.
and call for
call
T
of Warranty
erms
What Is Not Covered:
?
?
?
?
Service
If the
trips
to your home to teach you how to use the
product
is connected to any
voltage
If the fault is caused
by accident, neglect,
If the fault is caused
by
product.
other than that shown
misuse
or
on
the
rating plate.
Act of God.
factors other than normal domestic
use or use
in accordance
with the owner's manual.
?
?
?
Provide instruction
If the fault is caused
Noise
or
sound,
?
?
?
on use
of
by pests
product
for
or
change
example,
product.
rats or cockroaches etc..
vibration that is considered normal for
or
the set-up of the
example
water drain
sound, spin
warming beeps.
Correcting
the installation for
example, levelling
Normal maintenance which recommended
Removal of
by
the
product, adjustment
of drain.
the owner's manual.
foreign objects / substances from the machine, including
example, grit, nails, bra wires, buttons etc.
the pump and
inlet hose filter for
?
?
?
Replace
or
correct house
Correction of unauthorized
If this
or consequential damage
appliance.
product
(Example
wiring
:
or
correct house
plumbing.
repairs.
Incidental
with this
?
fuses in
to
personal property
caused
by possible
defects
is used for commercial purpose, it is not warranted.
Public
places
such
as
public bathroom, lodging house, training
center, dormitory)
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
of
a
27
Download PDF