LG | WD-85260NP | LG WD-85260NP Owner’s Manual

P
roduct Feature
Protection
against
creases
With the alternate rotation of the
drum, creasing in the laundry
is minimized.
More economical
FUZZY
by Fuzzy Logic System
detects the amount of load and water
Logic System
temperature, and then determines the optimum
and
washing time
consumption.
water level
to minimize energy and water
Child-Lock
The Child-Lock
children from
change
system has been developed
pressing
any button
the programme
Low noise
speed
By sensing
(except
during operation.
prevent
Power
button)
to
control system
the amount of load and
distributes load
to
evenly
balance, automatical
to minimize the
spinning
noise level.
Auto Restart
washing machine is turned off by a power failure,
it restarts automatically where it stopped when power is
supplied again. and it will be the same the machine is
unplugged and is plugged in again.
Although
C
the
ontents
Warnings .........................................................................................3
Specification ....................................................................................4
Installation .......................................................................................5
Care before
washing .....................................................................11
Adding detergent ...........................................................................12
Function ........................................................................................13
How to
use
washer........................................................................14
Maintenance..................................................................................21
Troubleshooting guide...................................................................24
Terms of
2
Warranty
........................................................................27
arnings
W
READ ALL INSTRUCTIONS BEFORE USE
WARNING!
!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the
?
or
store the washer where it will
?
exposed to the weather.
Do not
repair
or
cleaned
replace any part of the washer
attempt any servicing unless specifically
or
recommended in the user-maintenance
instructions
the
Keep
appliances
published user-repair
or
instructions
underneath and around your
free of combustible materials such
have been
etc.
supervision is necessary if this appliance
is used by or near children.
Do not allow children to play on, with, or inside
this or any other appliance.
Do not leave the washer door open.
An open door could entice children to
or
hang
Never reach into washer while it is
until the drum
The
process
retardant of fabrics.
can
Wait
reduce the flame
or
Do not slam the washer door closed
or
try to
To minimize the
unplug
this
possibility of electric shock,
appliance from the power supply
or
disconnect the washer at the household
distribution
?
moving.
has completely stopped.
laundry
?
on
crawl inside the washer.
in, washed in, soaked in,
force the door open when locked. This could
result in damage to the washer.
as
Close
the door
?
?
area
lint, paper, rags, chemicals,
?
dry articles that
or
instructions.
?
?
Do not wash
out.
tamper with controls.
?
using
that you understand and have the skills to carry
Do not
?
to persons when
spotted with
combustible or explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
garment manufacturer's wash and care
?
?
injury
washer, follow basic precautions, including the following:
Do not install
be
or
panel by removing
the fuse
or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
appliance
must be
?
?
If you don't have the proper
WARNING :
Improper
shock. Check with
outlet, consult
connection of the
an
electrician.
equipment-grounding
conductor
can
result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
a
-
3
nstallation
I
Install
or
store where it will not be
exposed
to
temperatures below freezing
or
exposed
to the
weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine
carpeted floor.
In countries where there
vermin,
pay
all times.
particular
is installed
on a
which may be subject to infestation by cockroaches or other
attention to keeping the appliance and its surroundings in clean condition at
Any damage which may
appliance guarantee.
are areas
be
cause
by
cockroaches
or
other vermin will not be covered
by
the
Transit bolts
The
?
appliance
is fitted with transit bolts to
and all transit bolts must be
Packing
removed before
When
prevent internal damage during transport.
using
the washer.
the base, be
the additional packing
unpacking
remove
support in
packing.
sure
to
Washer
the middle of the base
Removing
Packing Support
Base
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
?
If
they
along
vibration,
with the rubber
not
2. Unscrew the 4 bolts with
the spanner
3. Take out the 4 bolts
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
use.
bungs.
removed, it may cause
noise and malfunction.
are
Packing
heavy
?
Whenever the
appliance
is
transported,
the
transit bolts must be refitted.
4. Close the holes with the caps
supplied.
supplied.
5
nstallation
I
Installation
place requirement
Level floor
Drain Hose
Allowable
Washer
:
slope
Power outlet
under entire washer is 1˚
:
Must be within 1.5 meters of either side of location of
washer. Do not overload the outlet with
more
than
one
appliance.
Laundry
Additional Clearance :
For wall, door and floor modeling is required.
(10cm : rear /2cm:right & left side)
Do not place or store laundry products on top of washer at
any times.
They can damage the finish or controls.
Tub
approx.
2cm
Positioning
Install the washer on a flat hard floor.
Make sure that air circulation around the washer is not
impeded by carpets,rug
etc.
Before placing the washer on tiles, apply a rubber mat under the feet.
Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials under the
washer.
If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an insulating covered
with aluminum foil on the side facing the cooker or stove,must be inserted between the two appliance.
The washer must not be installed in rooms where the temperature can drop below 0°C.
Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of a breakdown.
With the washer installed adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable,
and a clearance of approximately 20mm is left between the top of the washer and the underside of the work-top.
?
?
?
?
?
?
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
Green and
appliance
must be earthed
Yellow(Earth)
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this
apparatus may
not
correspond
with the coloured
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the
by the
or
earth
symbol
or
coloured Green
or
plug
markings identifying
which is marked with the letter E
Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N
or
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L
If
a
13 amp
6
(BS 1363) plug
is
used, fit
a
13 amp BS 1362 fuse.
coloured Black.
or
coloured Red.
nstallation
I
Electrical connection
1. Do not
use an
extension cord
or
double
adapter.
be replaced by the
2. If the
3.
supply cord is damaged, it must
or similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply
4. Connect the machine to
5. The
?
?
?
appliance
must be
an
manufacturer
after
so
that the
plug
is
easily
its service
agents
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen
hoses may burst under pressure. The reliability of the electronic control unit may be impaired at
temperatures below freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the
washing machine at room temperature for a few hours before putting it into operation.
Machine is to be connected to the water mains
sets and that old hose-sets should not be used.
Washing
Connecting
water
using
new
hose-
hose
supply
supply pressure must be between
30kPa and 1000kPa (0.3~10kgf/cm2)
Water
Don't
strip
or
crossthread when
connecting
Inlet hose to the valve.
If the water supply pressure is more than
1000kPa, a decompression device should be
installed.
?
?
Hose connector
Rubber seal
?
tap
Cold
Cold
Hot(option)
Check water tightness of washing
machine connections by turning the
completely
?
Hot water
Two rubber seals are supplied with the
water inlet hoses these are in order to
prevent water leaks.
tap
on.
Periodically check the condition of the
hose and replace the hose if necessary.
Make sure that there is no kink
hose and that it is not crushed.
on
the
water
When your washer has two valves,
tap
?
?
The Inlet hose which has red connector is
for the hot water tap.
If the washer has two valves, the energy
is saved by using hot valve.
7
nstallation
I
Tap without
Normal
1. Unscrew the fixing
attach the tap.
screw
thread &
2.
to
screw
type inlet hose
Push the connector up till the
rubber
packing
with the
3.
is in
tap. Then
tight contact
tighten the 4
screws.
Tap without
Normal
1. Untighten the upper
thread &
connector
2.
touch
one
the rubber
packing
contact with the
Upper
Rubber
Connector
Fixing
tighten
packing
screw
Middle
the 4
Rubber
connector
supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
type inlet hose (Single inlet models)
Push the upper connector up till
screw.
Push the water
is in
3.
Connect the water
to the middle
tight
tap. Then
pushing
the
supply
hose
connector,
plate
down.
screws.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the
remove
Guide
the
Connector
tap is
Water
hose
Middle
guide plate.
connector
plate
?
Turn the middle connector not
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
To
supply
separate the
water
supply
hose from the middle connector
shut off the
tap. Then pull the
inlet hose down, pushing the
plate
down.
Hose connector
Rubber seal
Used the horizontal
Horizontal
tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension
tap
Make
sure
that there
kinks in the hose and that it is
not crushed.
Square tap
8
are no
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
Turn off the
if the machine is to be left for any length of time
if there is no floor drain(gully) in the immediate vicinity.
stopcock
especially
When disposing
of the
appliance,
cut off the mains
(e.g. holiday),
cable, and destroy the plug Disable the
door lock to
prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is
of suffocation !
all
Keep
packaging
a
risk
well away from children
Installation of drain hose
about 100
about 145
cm
cm
?
max.10cm min.60cm
about 105
cm
?
When
installing the drain hose sink,
secure it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
Laundry
about 100
tub
cm
Hose
about 145
Retainer
cm
Tie
max.
about 105
?
?
?
cm
The drain hose should not be
m
a
x
.
1
0
c
m
min.60cm
100cm
max.
100cm
min. 60cm
strap
min. 60cm
placed
higher than 100 cm above the floor.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
When the drain hose is too long, do
not force back into the washer. This
will
cause
abnormal noise.
9
nstallation
I
Level
adjustment
1.
Adjusting
the
washing
machine level
excessive
properly prevents
noise and vibration.
Install the
corner
appliance
of the
solid and level floor surface,
or
suspended type flooring
excessive vibration
Make
in
or
load balance
may contribute to
errors.
If the floor is uneven, adjust the adjustable feet
insert pieces of wood etc. under the feet)
2.
preferably
room.
Timber
NOTE
on a
required. (do
not
resting on the floor and
then check that the appliance is perfectly level. (use a spirit level)
After the washer is level, tighten the lock nuts up towards of the base of
sure
that all four feet
as
stable and
are
the washer. All lock nuts must be
tightened.
Diagonal Check
When pushing down the edges of the washing machine top plate
diagonally, the machine should not move up and down at all. (Please,
check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust
the feet again.
Concrete floors(tile...)
The installation surface must be clean,
?
?
Install washer
?
Before
placing
on a
dry
and level.
flat hard floor.
the washer
on
tiles, apply
Do not let the feet of the washer
a
rubber mat under the feet.
get wet. If feet of the washer get wet, slipping may
Wooden floors
?
Wooden floors
?
To
Rubber
particularly susceptible to vibration.
prevent vibration we recommend you place rubber cups under
If
possible
washer, secured
install the washer in
one
of the
Important!
Proper placement
corners
from
and
The washer must be
?
It must not "Seesaw"
?
The installation surface must be clean, free from floor
more
the LG spares
levelling of the washer ensure long,regular and
absolutely horizontal and stand firmly in position.
across corners
screws.
of the room, where the floor is
?
10
each foot,
to at least 2 floor beams with
Insert the rubber cups to reduce vibration.
You can obtain the rubber cups (p/no.4620ER3001B)
?
Cup
are
at least 15mm thick under the
?
occur.
stable.
dept.
reliable
operation.
under load.
wax
and other lubricant
coatings.
a
C
before
are
Caring
before
washing
washing
1. Care Labels
Look for
your clothes. This will tell you about the fabric content of your
garment and how it should be washed.
2.
a care
label
on
Sorting
To get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always
transfer
sort dark colors from
pale
causing discoloration
lightly soiled one.
can occur
soiled items with
Soil
(Heavy, Normal, Light)
Color (White, Lights, Darks)
Lint (Lint producers, Collectors)
3.
Caring
before
colors and whites. Wash
of white etc. If
Separate
Separate
separately as dye and lint
possible, do not wash heavily
clothes
according
to amount of soil.
white fabrics from colored fabrics.
Wash lint
and lint collectors
producers
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all
that
pockets to
make
sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
as
both
your washer and your clothes.
?
Close
zippers,
make
sure
snag
?
on
hooks and
little
to
that these items don't
other clothes.
Pre treat dirt and stains
a
strings
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help
shift dirt.
11
dding detergent
A
Adding detergent
1. The
Dispenser
and fabric softener
3.
Drawer
Detergent dosage
?
The
detergent should be used according to
instruction of the detergent manufacture.
?
If too
much
detergent is
the
used more than the
recommended amount, too many suds can
occur and this will decrease the washing result
heavy load to the
malfunction)
or cause
?
Use powder
loading
?
Main wash
only
U
?
(Causing
a
detergent only for the front
washer.
Detergent
for water
?PreWash+MainWashU
motor.
usage may need to be
temperature,
water
adjusted
hardness,
size and soil level of the load. For best
2.
Adding
results, avoid oversudsing.
Fabric Softener
(
)
MAX
MAX
125 ml
125ml
Tips
Full load
Do not exceed the maximum fill line.
Overfilling
can cause
clothes.
Do not leave the fabric softener in the
detergent drawer for more than
(Fabric softener could harden)
?
Softener will
during
?
the
2
days.
be added
automatically
last rinse cycle.
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
12
:
3/4 of the normal amount.
Minimum load
:
1/2 of full load.
early dispensing
of the fabric softener which could stain
?
to
manufacturer's recommendation.
Part load
?
according
:
Do not pour fabric softener
directly on the clothes
?
Detergent is flushed from the dispenser
the beginning of the cycle.
at
H
(1)
(2)
(3)
ow to use
washer
Button
:
Power
Button
:
Program
Button
:
Start/Pause
(4)
(5)
(6)
Button
:
Button
:
Button
:
Time
Child Lock
(7)
(8)
(9)
Delay
Option
Option
Button
:
Button
:
Temp.
Spin
Option
2. Intensive
?
?
If the
laundry is heavily soiled
option is effective.
By selecting
"Intenive"
the Intensive
option, the wash
extended, depending on the
time may be
program selected.
?
?
By pressing the Option button, all
Option functions may be selected.
-
Pre Wash
-
Intensive
-
Rinse+
-
?
laundry
is
heavily soiled,
"Pre Wash"
rinse, which may assist in
traces of
detergent
By selecting Rinse+ function,
and the rinse water
are
residue.
the rinse time
increased.
is effective.
Pre Wash is available in Cotton and
Synthetic.
The
is not available with Quick 30
Used to additional
removing
?
?
option
option
3. Rinse+
1. Pre Wash
course
This
this
program.
Crease Care
If the
press the Option button
before the wash program is started.
use
once
?
?
To
required lamp
identification.
4. Crease Care
?
will
light up for
If you want to prevent crease, select this
button with spin speed.
15
ow to use
H
Water
?
washer
Child Lock
Temp.
By pressing
the
Temp.
button, the water
temperature can be
If you choose to lock the buttons on the
control assembly to prevent tampering this
selected.
-
Cold
-30˚C/40˚C/60˚C/95˚C
function may be selected.
1. Child Lock
?
1. Water
?
-
-
temperature
below
according
be set
be selected
by pressing
and
buttons
as
to the program.
Cotton
Cold--30˚C--40˚C--60˚C--95˚C
Synthetic
Cold
-
can
can
holding both option
simultaneously.
Temperature
Water
Child Lock
--
30˚C
--
40˚C
--
?
When child lock is set, all buttons
except power button.
?
To deactivate Child Lock
60˚C
Delicate & Wool & Quick 30 &
Hand Wash
Cold
--
30˚C
--
required temperature lamp
identification.
more
to the page13.
buttons
inoperable
system, press both
simultaneously again.
40˚C
The
For the
option
are
detailed
will
light up for
information, please refer
?
To
change
to the desired program, whilst
in child lock mode.
1. Press both
option
buttons
together
once
again.
2. Press the Start/Pause button.
3. Select the desired program and press
the Start/Pause button again.
Change
the desired
program
?
The child lock
is
automatically
errors occur.
power is off.
be set at any time and it
canceled when operational
can
Also Child Lock works when
17
washer
ow to use
H
Time
1. Time
Program
Delay
Delay
Preparing washing before starting
"Time
Delay"
-
-
-
Turn
on
the water
Load
tap.
and close the door.
laundry
Place the detergent
?
and fabric softener in
the drawer.
?
-
-
-
available
according
to the
Lamp will light
up to indicate selected
program.
Delay"
Press Power button.
Press the
1.
button to select
Program
the program you require.
Press Time Delay button
?
and set the
Program
When Start/Pause button is
Cotton program is
desired time.
-
are
laundry type.
?
How to set "Time
8 programs
-
Press the Start/Pause button.
By pressing
the
pressed, the
automatically selected.
Program button,
the
program is selected in order of "Cotton
Synthetic Delicate Wool Hand Wash
--
(":" blinks.)
--
Quick 30
?
If Time
Delay button is pressed, "3:00" is
displayed. The maximum delayed time is
19:00 hours and the minimum time is 3:00
--
--
Rinse+Spin
--
--
--
Drain".
Regarding to the laundry type for each program
Please refer to the page13.
hours.
?
Each
time
?
pressing of the button
delay by one hour.
To cancel the time
delay,
advances
2. Course
on
press the Power
button.
?
?
Time
'expected time' from the
present to the completion of washing cycle
or selected process (Wash, Rinse, Spin).
Delay
According to
is
the condition
of water supply and
temperature, the delayed time and the actual
washing time
18
may vary.
-Cotton
-Wool
-Rinse+Spin
-Synthetic
-Hand Wash
-Drain
-Delicate
-Quick 30
ow to use
H
washer
Display
4. Time left
1.
?
?
During washing cycle, the remaining
washing time is displayed.
?
Recommended program
manufacturer.
Special function display
-
When child lock is selected, the
is displayed.
-
If the machine encounters
operation;
displayed
a
fault
during
2. Self
-
diagnosis display
operation,
displayed.
"
"
"
"
:
:
around 1 hour and
the associated fault will be
-
Drainage
:
Unbalanced load
Water temperature trouble
Completion of washing
When
washing cycle is completed,
is displayed on the "Multi
display".
"
?
around 50 minutes
:
Hand Wash
Quick 30
:
around 45 minutes
:
around 30 minutes
around 17 minutes
Rinse+
Spin
Drain
around 1 minute
:
:
The
temperature and other
washing
trouble
:
If these error letters are displayed, please
refer to the troubleshooting page24 and
follow the guide.
20
around 50 minutes
water
:
"
-
Wool
:
Water inlet trouble
"
"
during
-
Delicate
:
"
"
fault
around 1 hour and
Door is not closed
"
"
:
:
"
"
Synthetic
washing time may vary by the
amount of laundry, water pressure,
"
"
a
-
Water pressure sensing error
Problem of overfilling water
:
?
Cotton 60˚C
the associated fault will be
If the machine encounters
3.
around 2 hours
5 minutes
-
?
:
40 minutes
-
?
Cotton 95˚C
"
"
by
?
If
an
conditions.
unbalanced load is detected
if the suds
or
removing program
operates, the wash time may be
extended.
(Max. increasing
time is
45minutes.)
aintenance
M
Before
the washer interior, unplug the electrical power cord to avoid electrical
shock to avoid electrical shock hazards.
When
cleaning
disposing
door lock to
of the
cut off the mains
appliance,
cable, and destroy the plug Disable the
prevent young children being trapped inside.
The water inlet filter
-"
"error message will blink
detergent
-
on
the control
when water does not enter the
panel
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
1.
regularly that the
CAUTION
filter is clean to
objects
ensure
left in the
smooth
laundry.
running of your machine.
First drain
using the drain and then open the pump filter to remove whatever
any threads or objects.
Be careful when draining if the water is hot.
Allow the water to cool down before cleaning the drain pump, carrying out emergency
emptying or opening the door in an emergency.
Open the lower cover
cap( )byusinga
2.
Unplug the drain plug ( ),
allowing the water to flow out.
coin. Turn the drain
this time
plug(
water
)topullout
the hose.
use a
flowing
vessel to
on
3. Remove any
At
prevent
to the floor. When
foreign
from the pump filter
cleaning,
After
(
clockwise and insert the drain
)to
the
plug (
the pump filter
close the lower
open to the left.
( ).
turn the pump filter
water does not flow any more, turn
( )
material
original place.
cover
cap.
100
3
1
2
3
2
21
)
aintenance
M
Dispenser drawer
After
a
while
detergents
and fabric softeners leave
a
deposit
?
It should be cleaned from time to time with
?
If necessary it can be removed completely from the machine
downwards and by pulling it out.
?
To facilitate
cleaning,
The drawer
Detergent
can
be cleaned
?
also accumulate inside the
with
occasionally
an
washing
recess
The
replace
the drawer and
?
If you
use
can
be removed.
run a
drum
continuously
clogs appliances,
build up in
and if it is not
the
washing
the catch
which should
washing drum is made of Stainless steel, specks
articles (paper clips, safety pins) which have been left in
Although
?
by pressing
old toothbrush.
If you live in a hard water area, limescale may
seen and thus not easily removed.
metal
water.
recess
Over time the build up of scale
be replaced.
?
jet of running
part of the fabric softener compartment
Once you have finished cleaning,
rinse cycle without laundry.
The
?
the upper
a
in the drawer.
kept
places where
in check these may have to
of rust
can
be caused
or
bleaches, make
Descaler may contain chemicals that may
Remove any
22
small
drum should be cleaned from time to time.
descaling agents, dyes
use
by
the drum.
sure
they
are
suitable for
washing
use.
Never
it cannot be
spots with
steel wool.
a
stainless steel
damage part
of your
cleaning agent.
washing
machine.
machine
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
detergent.
off any
Immediately wipe
Try
water and a neutral non abrasive
warm
not to hit surface with
IMPORTANT: Do not
with
spills. Wipe
damp
cloth.
sharp objects.
methylated spirits,
use
diluents
or
similar
products.
2. Interior
Dry
around the washer door
Run washer
through
a
flexible
opening,
complete cycle using
Repeat
process if necessary.
NOTE
Remove hard water
gasket
and door
glass.
hot water.
deposits using only cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing
electrical cord into
1gallon(3.8L)
a
supply
and drain water from hoses.
properly grounded
of nontoxic recreational
electrical outlet.
vehicle(RV)
antifreeze into
an
empty wash drum.
Close the door.
5. Set
spin cycle
and let washer
spin
Not all of the RV antifreeze will be
6.
Unplug
electrical power
7. Remove
dispenser
8. Store washer in
9. To
remove
through
a
an
for 1minute to drain out all water.
expelled.
cord, dry the drum interior, and close the door.
drawer drain and
dry excessive
water from the
compartments.
uprignt position.
antifreeze from washer after
storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
23
roubleshooting guide
T
This
equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
washing
machine is
Possible Cause
Symptom
Rattling
clanking
and
?
noise
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop washer
and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
Vibrating
sound
noise
?
?
Heavy wash loads may produce
a thumping sound. This is usually
If sound continues, washer is
probably out of balance. Stop and
normal.
redistribute wash load.
Have all the transit bolts and
If not removed
packing
?
been removed?
Are all the feet
the
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe.
Contact
plumber
if necessary.
Too much
Oversudsing
detergent
or
unsuitable
detergent may cause excessive
foaming which may result in water
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another
tap in the house.
area.
?
Water
?
Water inlet
?
The filter of the inlet
supply tap
completely open.
is not
hose(s)
are
Fully
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
drains
24
slowly.
?
Drain hose is kinked
?
The drain filter is
or
clogged.
or
clogged.
Clean and
straighten
Clean the drain filter
the drain hose.
roubleshooting guide
T
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
be plugged in or connection
Solution
Make
plug
sure
fits
tightly
in wall
outlet.
may be loose.
?
House fuse blown, circuit
breaker tripped,or a power
Reset circuit breaker
outage has occurred.
If
Do not increase fuse
problem
is
it corrected
?
Water
supply tap
is not turned
Turn
on
a
by
water
fuse.
replace
capacity.
or
circuit overload, have
a qualified electrician.
supply tap.
on.
Washer will not
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
must
begins to spin. The door
lock before spin can be
achieved.
Door does not open
Once started, the door can not be
opened for safety reasons.
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
amount of laundry, water
pressure, water temperature and
other usage conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
removing
25
roubleshooting guide
T
Possible Cause
Symptom
?
?
?
Solution
Water
supply is not adequate in area
Water supply taps are not completely
open.
Water inlet
hose(s)
are
kinked.
Check another tap in the house.
Fully open tap.
Straighten hose(s).
Check the filter of the inlet hose.
?
The filter of the inlet
hose(s) clogged.
?
Drain hose is kinked
or
?
The drain filter is
?
Load is too small.
Add 1
?
Load is out of balance.
balance the load.
?
The
Rearrange
spinning
has
an
unbalance
detection and correction
system. If
individual
are
heavy
articles
Clean and
straighten
the drain hose.
Clean the drain filter.
or
2 similar items to
load to allow proper
loaded
bath mat, both robe,
?
Is the door
opened?
Close the door.
If"
"is not released, call for service.
Unplug the
power
plug
service.
?
Water overfills due to the
faulty water
valve.
?
26
help
etc.), this
system may stop spinning or even
interrupt the spin cycle altogether.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and
repeat the spin cycle.
(ex.
?
appliance
clogged.
clogged.
Water level
Close the water tap.
Unplug the
power
Call for service.
sensor
has malfunction.
plug.
and call for
T
of
erms
Warranty
What Is Not Covered:
?
?
?
?
Service
trips
to your home to teach you how to use the
If the
product
rating plate.
is connected to any
voltage
product.
other than that shown
the
Act of God.
If the fault is caused
by accident, neglect, misuse
If the fault is caused
by factors other than normal domestic
or
on
use or use
in
accordance with the owner's manual.
?
?
?
Provide instruction
on use
If the fault is caused
Noise
or
product
or
change
by pests for example,
Correcting
or
the set-up of the
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
of
example
water drain
warming beeps.
the installation for
example, levelling
the
of
product, adjustment
drain.
?
?
?
?
?
?
Normal maintenance which recommended
Removal of
by the
owner's manual.
/ substances from the machine, including the
pump and inlet hose filter for example, grit, nails, bra wires, buttons etc.
Replace
foreign objects
fuses in
or
correct house
Correction of unauthorized
Incidental
wiring
or
correct house
repairs.
consequential damage to personal property
possible defects with this appliance.
If this
or
product
plumbing.
caused
by
is used for commercial purpose, it is not warranted.
(Example : Public places
center, dormitory)
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
of
a
27
P/No.: 3828EN3808X
Download PDF

advertising