LG | WF-1001STH | LG WF-1001STH Owner’s Manual

Machine
Washing
OWNER'S MANUAL
MODEL
:
WF-1001STH
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
P/No.: 3828FA3630C
and quote this
require service.
cover
information to your dealer when you
Product Features
Innovated
Contents
washing wings
Page
Three small
washing wings generate strong and
sharp washing currents to clean laundry uniformly.
BASIC UNDERSTANDING OF WASHING MACHINE
Safety
Adjusted vertical movement and rotating direction of
the washing punch reduces laundry entanglement
and improves washing power.
Measure
.................................................................
Name of Each Part............................................................
5
Function of Each Button....................................................
6
Preparation Before Washing
Sensing Laundry Amount and Displaying
8
.............................................
Strong showering
Strong showering
ensure improved rinsing
removes
water
detergent
supply
and naps to
effects.
Water Level
.....
removing
Two lint filters catch naps and thread generated
washing to make the laundry cleaner.
naps
What is Softener
Program?...............................................
What is Showering Water Supply?....................................
Normal Washing................................................................
Blanket Washing
Baby Wear Washing..........................................................
Lingerie Washing
Delayed Washing
Other Washing
Water Level Setting and Amount of Detergent..................
..............................................................
during
..............................................................
..................................................................
High-intensity
stainless inner-tub
Spin bumpy side wall of the inner-tub, together with
rhythmic waves improve washing power by beating
and rubbing the laundry.
Speed up the results to improve drying.
By employing
a
strong spin method, laundry
becomes much cleaner.
2
10
10
12
14
16
18
20
22
24
How to Use Bleach............................................................
25
Proceeding of Washing Program
Basis of Selecting Each Button
26
......................................
.........................................
27
HOW TO INSTALL AND MAINTAIN
Installing the Washer.........................................................
Maintaining the Washer
Troubleshooting.................................................................
....................................................
Strong spin
9
HOW TO USE WASHING MACHINE
...............................................................
Double devices for
4
28
36
38
COMMON SENSE FOR WASHING
Common Sense For
How to
Washing
Keep Clothes
...........................................
........................................................
3
40
41
Manufacturer is not
user's
responsible
for accidents caused
by the
result of not
user as a
the
following
guide
In
§
Name of Each Part
Measure
Safety
Operation
§
Do not insert the hand inside the inner-tub durHands may get
ing operation.
in the laundry.
Installation Area
Avoid
exposed
humidity is high. Avoid
caught
switch
If the machine does not
area.
It may
electric shock
stop
rain,
to snow,
area
where
Refer
water-contact to the
cause
Powder
or
malfunction.
operating up to 15 seconds
after opening the lid, stop
using the machine and
for
detergent box
delayed washing
Power switch
Drain hose holder
contact A/S center
for
Water hose
Showering supply device
or
stain-
High-intensity
washing tub
repair.
less
Power
Children's
§
Safety
Do not let children climb
on
top of the machine
§
or
climb into the inner-tub.
Electric Outlet
Avoid
connecting
single
outlet. It may
several electric devices into
cause a
a
supply cord is
damaged, it must
be replaced by the
Bleach inlet hole
fire.
Refer
manufacture
Do not let children insert the hand
a
or
service agents
into the bottom of the machine
where is
plug
If the
Level indicator
revolving part.
Injury may occur!
its
or
similarly qualified
person in order to
avoid a hazard.
Refer
Lint filter
Control part
Refer
Volatile Material
§
Do not wash
material such
cause an
fire
or
or
§
dry clothes stained with volatile
as
Benzene
or
Hot Water
Avoid
using hot water
plastic parts or cause
thinner. It may
Refer
70°C. It may deform
malfunctions.
over
Washing wings
Auto
Vertical movement of
explosion,
when
burn.
a
be
washing punch
operated
laundry is deposited.
can
Heat
§
Avoid electric heaters, candles,
bug smokers, etc., near
or deform plastic parts.
the
cigarette lighters,
machine. It may ignite
Before
the power cord, make
connect a circuit breaker.
connecting
ground or
Otherwise,
it may
electric shock.
sure
Refer
Drain hose
Refer
Accessories
to
Refer
cause
Circuit breaker
4
§
Grounding
leg
sufficient amount of
Set the proper water level, an excessive amount of water
may increase entanglement of laundry.
§
adjustable
Water
hose(2EA)
Drain hose
Height adjusting plate(3EA)
5
NameofEchPrt
Function of Each Button
various functions is
Changing
possible only
Selection button does not work when the washer is in
How to select
§
22
washing
a
§
in PAUSE state.
operation(Except for water
level
button).
In
LINGERIE
Refer
Use it to select
washing programs.
By pressing the button, it cycles[NORMAL
ENER
BLANKET
BABY WEAR
LINGERIE
+
+
BLANKET
SOFTENER
SOFTENER]
setting indicates
the final rinse.
10
NORMAL
SOFTENER
PROGRAM
SOFT-
+
WATER
TEMP
when to insert fabric softener
Refer
HOT
COLD
§
MEDIUM
TINY
§
WASH
POWER
cold
adjust
RESERVATION
wash
:
+
+
rinse
lamps
spin lamps
rinse
sensing
:
blink.
water level
blinks.
lamp
without
lamp
Detergent deposit display
24
opened
alarm sound is
blink.
blink.
spin lamps
+
:
displayed.
are
generated
indication.
EX-LARGE
even
Wash process
added
washing
display
Functiofeahb
status.
Start and temporary pause
Use it to start
or
min
Pressing
TINY
pause
temporarily.
the button repeats start and temporary pause.
After 10 minutes in
a
temporary pause state, the power will automatically
turn off.
RINSE
WATER SUPPLY
Water level is set to LARGE for LINGERIE program,
EX-LARGE for BLANKET program.
adjusted
Refer
HOUR
WASH
At NORMAL and BABY WEAR program, water level is
selected automatically based on the amount of laundry.
be
rinse
+
indications
Next step is lit, current step blinks and finished step is turned off.
SOAKING
can
spin
Indicates the current
the water level
By pressing the button, it cycles [LARGE
MED
SMALL
LARGE]
Water level
Abnormal
wash
following
Refer
Upon loading laundry, it displays the correct amount of detergent to be
according to the amount of laundry(based on concentrated detergent).
§
How to
drainage
:
:
the
38
SMALL
In LINGERIE program, cold water is selected automatically(Hot water may damage the fabric.)
§
supply
Abnormal
The lid is
BLANKET
LARGE
water(When hot water only is
selected, hot water is supplied for washing and hot and
cold water are supplied for rinsing).
or
operation,
Abnormal water level
EX-LARGE
How to select temp.
Use it to select hot
NORMAL
SOFTENER
BABY
WEAR
BABY WEAR
WATER
LEVEL
§
of abnormal
operation
LINGERIE
SOFTENER
during
+
case
Abnormal water
program
abnormal
Displaying
§
For manual wash, rinse and
spin
Wash:
SPIN
min
when the washer is in
Use it to
change washing
SOAKING is used to
operation.
Soaking
time.
remove
time is about 80
old
or
minutes(
hardened dirt
more
effectively.
You cannot choose in LINGERIE
program).
Rinse:
Use it to
START/PAUSE
§
Wash power
§
Use it to
adjust the strength of water current.
By pressing the button, it cycles
[
Strength
ed at any
At the
6
can
be
adjust-
course.
beginning,
20
use
delayed washing
Refer
it starts with MED
[
].
the
frequency
supply rinse
of rinses.
Use this function for
delayed washing.
delay time.
Bypressingthebutton,itcycles[6 9 12 6]
hours. (Up to 12 hours can be delayed)
To cancel delay time, turn the power switch off.
When
Use it to set the
]
of the water current
How to
rinse 3
By pressing the button, [rinse 2
1
rinse 4
water
water supply rinse 2
water supply rinse 3
water supply rinse 4
off
rinse 1] are repeated. If the [water supply] lamp is
turned on, the water supply rinse is executed during the first rinse only.
Water supply lamp turns on during the water supply rinse, and turns off at the completion of the rinse.
When you select RINSE only, the operation starts with water supply.
change
NOTE
rinsing or spinning only, Normal is set to [Large] and Baby wear is set to
[Med] and Blanket is set to [Ex-Large] automatically. Adjust the water level as
needed.
Spin:
Use it to
change
the
spinning
time.
7
Care Before
Sensing laundry amount and displaying water level
Washing
Laundry Handling
§
Check
pockets for any
articles(They may damage
clothes or the washer).
Brush off dust and soil from
Check the label of the
clothes.
for the
washing
partial
stains before
41
Deposit laundry
and
1 press the START/
garment's
method. Clean
PAUSE button.
washing.
2
Without water, the pulsator
turns to the left and right for
about 4 seconds to
amount of
Refer
sense
3
A proper water level
and the amount of
the
laundry.
detergent
played.
is dis-
HOT
COLD
EX-LARGE
LARGE
Wash colored and white clothes
separately.
Since
bulky and light laundry
float,
may
buy a washing net and
wash them a few at a time(parker, jumper, etc.).
MEDIUM
Since
stringed or long clothes
cause
may
entanglement, tie
them or use the washing net.
SMALL
TINY
If either the inner-tub contains water
the
laundry is wet,
or
water level may be
different from the initial set
level.(It
malfunctioning. It is the proper
water setting for laundry.)
is
not
Bulky and light laundry may
Floating laundry may get damaged.
use a washing net, insert
after
detergent
dissolving it, so that
undissolved detergent will not be left
When you
It may come to increase the noise
but during spin, do not care about
it.
in the net.
Preparation
§
for
Connect the water
1 hose and then open
cause a
water level lower than usual. In this
case,
§
Example
of
manually adjust the
deposition
of
water level.
detergent deposit
based
on
the indicated amount.
Washing
2
Lower the drain hose.
3
Connect the power
plug to the wall outlet.
The
following indication of the amount
(1 detergent cup: arround 40g)
of
detergent
is based
on a
concentrated
detergent.
the faucet.
HOT
EX-LARGE
LARGE
MEDIUM
COLD
In
tiny water level:
concentrated detergent(3/4 cup).
case
of
Regular(high-density) detergent
uses
1.5 times
as
much
as
the
indicated amount.
SMALL
TINY
8
9
SensigLaudryAmotDplWv
What is the Softener
Program?
The washer sounds 'boo-'
during the final rinse to indicate the time for deposition of fabric softener.
(If you are not present after selecting softener program, washing completes normally without deposition
of fabric softener.)
1
Select
[Program+Softener].
2
When the final rinse starts...
After the final rinse water
3 (If you
did not
deposit
supply
fabric softener after
4
Washing
is
completed.
the first boozer sound, the boozer sounds for
the second time, and the washer waits for 3
minutes)
The first indication
LINGERIE
PROGRAM
NORMAL
SOFTENER
BABY
WEAR
Press the program button to select
BLANKET
[PROGRAM
AND
When the water
supply
starts to
times to indicate the time to
SOFTENER] simultaneously.
rinse, boozer sounds 20
deposition
the fabric softener.
Now open the lid, deposit fabric softener and then close the
lid. The rinse will start after the water supply is completed.
What is
This function is to
Water
Showering
remove
substances like wastes of
detergent
formed at the
Showering
rinse.
deposit
fabric softener
during
WhatiseSofnrPgm?
the first indica-
fabric softener and press the START/PAUSE
button, rinse starts immediately(You don't have to wait for
three minutes).
If you
deposit
and naps.
same
water
If you did not
tion, deposit it during the second indication.
Supply?
This function operates before rinsing, after washing and
draining(At this time, water supply and draining are per-
10
The second indication
time).
supply
function is
performed
before each
LINGERIE program does not have
CAUTION
showering water supply function.
The inner-tub may turn during the showering water supply. It is not malfunctioning.
If you select rinse only, showering water supply function does not operate during the
first
rinse.
11
Normal
Washing
operation, the washer completes washing cycles by itself. If adjusting wash time,
the number of rinses or spin times desired, adjust them in the PAUSE state.
If adjusting water level is desired, directly adjust it by pressing the "WATER LEVEL" button.
With one-time
1
Press the power switch.
Select the desired
2 program.
3
Deposit laundry.
4
Press the START/PAUSE button.
5
Deposit detergent
and close lid.
AUTO POWER OFF
I
O
LINGERIE
PROGRAM
NORMAL
SOFTENER
BABY
WEAR
BLANKET
START/PAU
Press program button to select
either [NORMAL] or
[NORMAL+SOFTENER].
For
laundry with fragile buttons,
etc., turn them inside out to prevent
damage.
The washer
senses
the amount of
laundry and
sets the
Deposit detergent
water level.
If the lid is not
based
on
the indicated amount.
closed, the machine
cannot start
spinning,
it generates the alarm sound.
Electric power automatically turns off 10 seconds after the
washing cycle
finishes with "boo-" sound.
In Normal program.......
Deposit laundry
NOTE
before
pressing
the START/PAUSE button.
The washer
senses
the amount and kinds of
laundry and
time, number of rinses and spin time by itself.
While sensing the most appropriate water level, each
If either the inner-tub contains water
NOTE
or
the
sets the most
water level
lamp
laundry is wet,
appropriate
water current, wash
blinks in turn.
water levels may become
Manually adjust proper water level before operating the washer.
Bulky and light laundry may cause a water level lower than usual. In this case,
higher.
manually adjust
the water level.
For
laundry that may easily be discolored, do not use [SOAKING] washing.
supply may be resumed about 2 minutes after starting the wash. It is
water level adjustment function.
Water
12
an
automatic
13
NormalWshing
Blanket
1
Washing
Deposit detergent.
2
Deposit
blanket.
3
Press the power switch.
4
Set to BLANKET program.
5
Close the lid.
6
Press the START/PAUSE
button.
AUTO POWER OFF
I
O
LINGERIE
PROGRAM
NORMAL
SOFTENER
BABY
WEAR
Use the dissolved
detergent
in water
about 30°C.
Water level is
automatically set
[EX-LARGE]. Deposit proper
amount of detergent.
After
inserting blanket, press it uniformly for good washing results.
to
BLANKET
START/PAU
If the lid is not
Press program button and select
either
[BLANKET]
SOFTENER].
or
[BLANKET
cannot start
+
ates the alarm sound.
cally
set to
[
]
§
a
washing net in case of a cashmere quilt, since its lining may come out of the inner-tub
damaged.
washing light laundry like a cashmere quilt and bedspread at a high water level, a little bit
and become
When
of water may
In
out of the drain-outlet.
of
using a dryer,
detailed description,
case
For
come
Never wash carpet in the
[EX-LARGE]
when
washing completely finishes.
water level
Note: In Blanket
use
BLANKET
refer to the
drying program.
dryer user's guide.
washer(It may damage the washer and the carpet).
Program
Quilt:
Blanket:
Blankets made of 100%
washing
marks
synthetic fiber with hand
be washed.
can
Kinds:
Acryl
blanket: 100%
Mixed fabric blanket:
acryl(nylon coating)
cotton+polyester
Wool blanket: carded wool blanket
Weight:
14
Electric power turns off automatically
10 seconds after the alarm sounds,
wash power.
Never wash electric blanket.
Use
spinning.
It also gener-
In this case, the washer will automati-
and
CAUTION
closed, the machine
Less than
5.0kg
for
a
sheet
Following quilts
with hand
washing
marks
can
be
washed.
Fillings:
100% polyester
Weight: about 2kg(weight
than 3.5kg)
Size: smaller than 200
×
of the whole
quilt:
less
250cm
15
BlanketWshig
Baby
This function
can
Wear
be used for
Use this function to wash
1
Washing
a more
diapers
Press the power switch.
or
efficient rinse.
babies'
wear.
Select
Baby Wear
2 program.
3
Deposit laundry.
4
Press the
[START/PAUSE]
button.
5
Deposit detergent
and close lid.
AUTO POWER OFF
I
O
LINGERIE
PROGRAM
NORMAL
SOFTENER
BABY
WEAR
Press program button and select
either
START/PAU
BLANKET
The washer will
automatically
set to 'three times' rinse.
Deposit detergent
[BABY WEAR]
[BABY
+ SOFTENER].
or
If the lid is not
WEAR
on
the indicated amount.
closed, the machine
cannot start
spinning
and generates the alarm sound.
To protect
CAUTION
When
the
16
based
laundry, do
not select
[
] wash power.
using neutral detergent or liquid detergent, deposit proper
[Instructions for detergent].
amount of
detergent
based
on
17
BabyWershing
Lingerie Washing
Use this function to wash delicate and weak laundries like
1
lingerie,
wool
Select LINGERIE
Press the power switch.
2 program.
fabric,
3
etc.
Deposit laundry.
Press the START/PAUSE
4 button.
5
Deposit detergent
6
Close lid.
AUTO POWER OFF
O
I
LINGERIE
PROGRAM
NORMAL
SOFTENER
BABY
WEAR
BLANKET
START/PAU
Press program button and select
either
[LINGERIE]
SOFTENER].
or
[LINGERIE
For
laundry with fragile buttons, etc.,
If the lid is not
Use proper kind of detergent according to the type of laundry.
turn them inside out.
+
cannot start
closed, the machine
spinning.
It also generates
the alarm sound.
Electric power turns off automatically
10 seconds after the alarm sounds,
when
§
Do not select SMALL
CAUTION
Only
cold water is
When you
or
TINY water levels.
set(Hot
Laundry may get damaged.
Spread
damage laundry).
detergent for domestic dry cleaning, deposit proper amount of
based
on
the
'Instructions
for detergent'.
detergent
Use this program for delicate and weak laundries like wool clothes and lingerie(Wash clothes with
[WATER-WASHING] marks only).
Wash less than 2.0kg of laundry at a time.
use
Do not wash
be
neutral
water may
detergent
altogether with
or
white clothes,
bright-colored
easily discolored.
spin is 'weak' for LINGERIE program,
Since
How to
water may
clothes
drop
even
or
dark-colored clothes which
after
surface.
dry
wool and
wool and
lingerie
clothes
on a
lingerie
shady, flat
In
washing completely finishes.
clothes
case
of
using a clothes hanger, wrap the upper
the hanger with a towel to maintain the
portion of
shape of the
neck
shoulder section.
or
can
spinning.
Weak wrinkles after
drying
can
be smoothed out
by ironing.
18
19
LingerWash
Delayed Washing
This
When
1
conveniently for the every washing type.
you want to cancel reservation for delayed washing,
can
be used
Press the power switch.
2
Select
a
switch the power off and start
program.
3
again.
Set the time.
4
Insert
and press
the START/PAUSE button.
laundry
5
Deposit detergent in the
powder detergent box.
6
Close lid.
AUTO POWER OFF
O
I
LINGERIE
PROGRAM
NORMAL
HOUR
SOFTENER
BABY
WEAR
START/PAU
BLANKET
RESERVATION
Press the RESERVATION button to
set the time when the
ing
is
delayed wash-
completed.
Insert
laundry and press
Pull the
START/PAUSE button. The washer
senses
the amount of
displays
laundry and
the water level.
If the lid is not
powder detergent box forward and deposit displayed amount
of detergent. Then, push back the
cannot start
box.
If the lid is
How to set the
Example
1
:
To
delay
complete washing
in 9
hours(Time left
until the
completion of washing
is 9
hours).
Make
CAUTION
sure
on
[6].
deposit detergent in the powder detergent box.
detergent with the laundry for a long time, the laundry
lid is opened, delayed washing cannot proceed.
to
If you leave
When the
Press the RESERVATION button and it will be lit
In
case
of power failure, set
According
HOUR
to water
again
from the
After
Press the RESERVATION button
again to set the delay time when you want
delayed washing(9 hours).
By pressing the button, it cycles [9 12 6 9].
Up to 12 hours of delay is possible.
When you want to manually select the wash time, number of rinses, water temper-
partially
discolored.
detergent
may be unable to be
box before
completed by
the preset time.
depositing detergent.
you can change the program, wash time, number of rinses,
and
water
level.
temperature
setting delay time,
spin time,
to finish the
HOUR
ature, water level, wash power and program, press the RESERVATION button,
and select them
20
water
may get
beginning.
supply conditions, washing
Remove any water from the powder
Moisture may harden the detergent.
2
opened, delayed washing
proceed.
time
RESERVATION button
RESERVATION button
It generates the
spinning.
alarm sound.
cannot
§
closed, the machine
as
you want. Then press START/PAUSE button.
How to wash when you go out
NOTE
When you cannot take the laundry out immediately after washing is completed,
select wash and rinse only(In this case, do not select spin to prevent wrinkles).
you'd better
21
DelaydWshing
Other
Washing
Use it to select the desired
washing
is
cycle among washing,
rinse and
spin,
or
to
repeat
one
of them after
completed.
§
Wash
Press the
only
Press the WASH button to select the time.
power switch.
Adjust the
water level
according
If the water level is not
§
Wash and rinse
26
Deposit
laundry.
Refer
to the amount of
laundry. 24
selected, it is automatically
set to
Press the
Deposit detergent
START/PAUSE
and close the lid.
button.
Refer
[MED].
only
Press the WASH button to select the time. 26
Refer
Deposit detergent
Press the RINSE button to select the number of rinses.
26
based
on
the indi-
cated amount.
Refer
If
Adjust the
water level
according
If the water level is not
§
Rinse
only
to the amount of
laundry. 24
selected, it is automatically
set to
Press the RINSE button to select the number of rinses
Adjust the
water level
according
If the water level is not
To
deposit
to the amount of
26
set to
The washer
displays the amount
detergent and begins supplying water.
[MED].
of
Refer
laundry. 24
selected, it is automatically
Refer
only [WASH or WASH+RINSE] is
selected, water will not be drained after
it is completed.
For draining, press the SPIN button
Close the lid.
Refer
Press the
START/PAUSE button.
[MED].
fabric softener... Select the SOFTENER program,
depositing fabric softener.
then it indicates the time for
In this case, amount of
When
§
Rinse and
selecting
rinse
laundry will
only, it
not be sensed.
starts with water
supply.
spin only
Electric power turns off
Press the RINSE button to select the number of rinses.
Press the SPIN button to select the time.
Adjust the
water level
according
If the water level is not
§
26
26
automatically
sounds,
when washing completely finishes.
10 seconds after the alarm
Refer
Refer
to the amount of
laundry. 24
selected, it is automatically
set to
Refer
[MED].
In
Spin only
lowed
In
Press the SPIN button to select the time.
(Each button pressing cycles
3 min.)
22
case
of
selecting RINSE
or
RINSE and SPIN, water will be
supplied before starting RINSE, fol-
5 min.
26
7 min.
water will not be drained after
Refer
Off
by SPIN.
of selecting RINSE only,
case
1 min.
Check
pockets
belongings.
for
If the lid is not
completely closed,
the washer generates the alarm
sound.
RINSE. To drain water, select
SPIN.
If the water level is not
is
automatically
set to
selected, it
[LARGE].
23
OtherWasing
Water Level and Amount of
Water
Amount
Level
of Water of
EX-LARGE
94L
LARGE
74L
MEDIUM
65L
Amount
Amount of
laundry Concentrated
Less than
10.0kg
Less than
5.5kg
Less than
4.0kg
Detergent
Detergent
§
63g
About
94g
About
49g
About
74g
About
43g
About
65g
How to Use Bleach
Always separate clothes
deposit bleach through
For powder bleach dissolve it with water and deposit it into the tub.
Make sure that the bleach does not touch the laundry.
For a detailed description, refer to the "Directions for bleach".
Regular synthetic
About
How to Use Bleach
to be bleached and then
Bleach
deposit
the bleach
deposit
hole.
hole
SMALL
56L
TINY
41L
3.0kg
Less than
1.2kg
About
37g
About
56g
About
27g
About
41g
NOTE
deposit bleach directly into the laundry
(The laundry may get discolored or damaged).
Separately bleach colored clothes and synthetic
HowtUseBlach
Do not
Less than
textiles.
Concentrated
detergent: 20g per 30 liters of water.
Regular synthetic detergent: 30g per 30 liters of water.
When sensing water levels automatically, the amount of
even
For
water can differ
according
to the amount of
laundry
at the same water level.
synthetic detergent,
use one
that generates less bubbles. This type of
detergent
is
specially designed
for
washers.
In
case
deposit
CAUTION
of
using liquid detergent,
water(detergent: water=1:1)
If you use laundry soap(natural resin) for a long time, dirt
the inner-tub wall and cling to laundry during washing.
Using
24
dissolve it with
and
deposit
it
through
the bleach
hole.
excessive amount of
detergent
separated
from
may reduce the rinse effect and
laundry may remain
pollute
on
the environment.
25
Proceeding
SOAKING function
of
Washing Program
be selected in every
program(except lingerie program).
The following times for a washing program are based on a simultaneous supply of cold & hot water at the pressure of
2.5kgf/cm2 and normal draining. Therefore, the time can differ according to water pressure and draining conditions.
Course
can
Auto water
level setting
Wash
EX-LARGE
Normal
Rinse
Spin
1-7min.
Water
rinse
supply
is only for
3-20min.
Water level is set
1-7min.
3 times
the washer before
select other functions
as
desired. When the
making changes.
selection
automatically after sensing the
amount of
laundry is high
or
low, press the WATER
Wash power selection
Strong
Heavily-stained clothes
Medium
Normally-stanied clothes, cotton, yam, synthetic fabric, thin clothes
Weak
Lightly-stained
20-96min.
SMALL
clothes
For LINGERIE program, water current is
To dissolve
EX-LARGE
user can
Water LEVEL selection
§
§
EX-LARGE
Blanket
supply
the
HOT
COLD.
HOT, COLD
By pressing the button, it cycles COLD
Even when only HOT is selected, COLD and HOT water is supplied simultaneously during the RINSE cycle.
At LINGERIE program, only COLD water is used.
(min)
18-96min.
operation, pause
Water
§
washing,
the first rinse.
SMALL
Baby Wear
washer is in
Each Button
Selecting
In addition to full-automatic
Total time
2 times
3-20min.
Basis of
15min.
7min.
2 times
61min.
detergent,
the washer starts
separately adjusted to a very gentle one to prevent damage to clothes.
operating at a level which is one step lower than the preset water level.
Wash selection
§
SOAKING
80min.
Heavily stained clothes
10-20min.
20
Heavily stained clothes, thick clothes
10-20min.
Normal clothes, cotton, yam,
10-15min.
Lingerie
3min.
LARGE
1min.
2 times
33min.
Soft clothes, delicate clothes,
3-15min.
3
synthetic fabric, normally-stained clothes, thin clothes
lightly-stained
clothes
Actual wash time may differ
For
Total time may become
longer
under
bad water
supply
and
and
damage).
condition.
drainage
Total time may become longer when there is a larger amount of laundry.
Remaining time will be reduced as washing is progressed.
In case of the SOAKING, total time is added to 80mm.
a
according to water level.
LINGERIE program, washing wings revolve very slowly(to prevent shrinkage
Rinse selection
§
Water
supply rinse
Water
Rinse 4
supply
rinse is
only for the first rinse.
Heavily stained clothes
Rinse 3
Normal clothes, cotton, yam,
Rinse 2
Rinse 1
Spin
§
clothes
selection
7
5-7min.
Thick clothes
5
3-5min.
Normal clothes,
3
1-3min.
Soft clothes
1
26
Lightly-stained
synthetic fabric, normally-stained clothes, thin clothes
1min. at low revolution
speed
For LINGERIE program, the tub turns very
light clothes, thin
clothes
slowly and spins for a very short time
(to prevent damage to clothes).
Clothes to be ironed, delicate clothes
27
BasiofSelctngEhu
the Washer
Installing
installation of the washer may cause noise and malfunctioning.
1. The ventilating openings in the base area must be obstructed by carpeting when the
Improper
CAUTION
installed
floor.
carpeted
washing machine on
on a
2. Install the
a
surface, any tilt should be less than
§
How to
adjust
1
level and firm
4°.
Installation
machine is
area
Install the washer
level
washing
on
2
flat and firm surface.
Checking
level
3
Open the lid, and check if the washer
eled by looking down from the top.
Adjust the drop of the level indicator
4
Horizontal
setting
5
correctly lev-
Check if installation surface is tilted.
(Try to shake the washer and check
firmly installed.)
if the washer is
to the red circle.
level
Confirming
Distance between drain hose and the wall
Distance between drain hose and the wall should be
Place the washer to
Lift up the front of the washer and
the level indicator to the center by
level
adjustable legs clockwise
firm the
or
adjust the drop of
turning the
using the adjusting plate.
is
Checking slope
as
in
figure
level.)
2.
original position and confirm the
(Try to shake the washer and con-
than 10cm, and the distance between the other part
rear part and the wall should be more than 2 cm.
more
or
the
More than 2cm
Check the location of the
Adjustable leg
level in the front of washer.
More than 2cm
More than 10cm
Turn the
adjustable legs
horizontal(2EA).
§
Horizontal
Location of
to set the washer
setting
How to
Cause
drop
When the front is lower.
When the
rear
is lower.
When the left is lower
When the
(Example)
28
right
is lower.
drop of the level
supporting plate, and
To
move
10
mm
the
How to
adjust
Use the
use
the
adjusting plates
adjusting plates
to level the washer when the
adjustable leg's
cannot cover the gap.
Adjust the front adjusting plate with the adjustable
legs(2), or adjust the adjustable legs.
Adjust the rear adjusting plate with the adjustable
legs(2), or adjust the supporting plate.
Adjust the left part of the front and
plates or the supporting plate.
rear
Adjust the right part of the front and
plates or the supporting plate.
indicator
turn the
adjusting
rear
adjusting
by 1.5 mm: Use two adjusting plates
adjustable legs 2-3 times.
Use
and
a
adjusting plate by pilling
them up to cover the gap,
when necessary.
29
InstaligheWr
Installing
the Washer
How to connect the faucet
§
connector
Guide
ring
Rubber
packing
Disconnecting
the middle connector
1 from the drain hose
Push the connection
down
coupling
as
in the
figure.
Disconnecting
the middle connector
2 from the drain hose
Disconnect the water hose
hose while
connection
pressing down
coupling.
by pulling down the
on
water
the
Loosening fixing
3
Loosen the 4
fit it
on
fixing
screws
screws
of the faucet connector to
the faucet.
Faucet
connector
Connecting
coupling
Middle connector
When the faucet diameter is
When the faucet diameter is
big
or a
big...
rectangular
faucet is used, unscrew the four fixing
remove the guide ring as in Fig. 3.
and
screws
4
Push up the faucet connector
Push the connector up to the faucet and make
that the rubber packing inside the connector is
pletely
half-tightened(4 mm).
Connector
packing
About 4
5
Fixing
the connector
While the rubber
faucet, slightly
packing is completely attached to
screws(facing the wall) to
6
the
fasten 2
Tightening fixing
of the
con-
nector
Tighten
up
screws
on
the two
screws
marked below, while
pushing
InstaligheWr
the faucet connector.
touch the faucet.
ring
Rubber
com-
attached.
Check if the middle connector is
Guide
sure
Connecting
coupling
If you cannot use a screw driver
due to a narrow space, tighten
the two
screws(facing the wall)
they touch the faucet
slightly and then insert.
until
mm
Check
Middle connector
7
Tightening
the middle connector
8
Turn the half-loosened middle connector to the
right(see no.4)
and
visible part of the
tighten
screw
it to make the
length
Connecting
dle connector
Push down the
of the
the water hose to the mid-
connecting coupling
of the water hose
the middle connector and
water hose
Insert it to the middle connector and then let it go.
from the middle connector.
threads less than 3mm.
10
Checking
connection of the water
hose and middle connector
Connect the water hose to the washer, and then
there is any leakage after opening the faucet.
If there is
leakage, close the faucet and
from Fig.1. (Improper installation of
Fig.4 and Fig.7 may cause
leakage.)
Less than 3mm
start
see
again
Middle
Check
connector
Middle connector
30
9
Connecting
Connecting
coupling
31
if
the Washer
Installing
How to connect the water hose
§
How to connect the drain hose
§
Insert the drain hose to the connect-
1 ing
area
at the
2
body.
Valve connector
Push the hose
clip to the body to tighten
it as in the figure(Push the hose, making
the hose clip be directed to the bottom).
Less than 10cm
Less than 6cm
The hose is clogged
alien substances.
Less than 2m
You
no
can use
the cold water hose
only, when there is
hot water faucet.
The hose is
over a
1
Checking
rubber
packing
of the
connector
Make
sure
that the rubber
packing
is inside the
valve connector.
When there is
no
2
Checking
inside of the washer
or
packing,
Make
placed
doorsill.
sure
that the
hose is not crushed.
Make
that the hose is
sure
Avoid
not crushed between the
submerging
the end of hose.
wall and the washer.
Curve
colors
Less than 3m
Cold water hose and hot water hose have
and orange color,
rubber
by
check the
respectively.
Orange
a
The hose is clogged
alien substances.
blue
Do not mix them.
color
contact a
Blue color
by
A
Extension hose is
Make
Curves may get alien substances stuck
and disable drainage.
Service Center.
Drain valve
connector
used.
sure
B
that the hose is not curved.
When
cutting
the drain hose, cut A
or
B and insert
the end of the hose into drain valve connector.
Water leaks without the
rubber
packing.
How to
§
Rubber
Valve connector
The drain hose is installed at the
packing
1
3
Connecting
the valve connector to
the washer
Set the valve
upright
and then
tighten completely.
change
4
Tightening
Slowly tighten
by turning it in
the valve connector
the
Untighten
securing the
hose and 4
securing
screw
drain
screws
the back
cover.
2
the direction of drain hose
right
side of the washer. To install at the other side, refer to the
Change
the direction
of the drain hose to
opposite
side. Do not
3
Tighten
secure
hose
the
screw
to
the drain
(Make
sure
that
let the drain hose be
the hose does not
kinked.
touch the
4
following
method.
Reassemble the
back
cover.
case or
other
surrounding
parts).
the valve connector
a
clockwise
direction 2-3 times, while
holding the hose.
Back
cover
Screw securing
the drain hose
Change
32
Screw
Inner drain hose
the direction at the back of the washer. If you
Screw
change
Screw
Back
cover
it at the front, water may not drain.
33
InstaligheWr
the Washer.
Installing
Make
CAUTION
§
sure
to connect the
Otherwise, it may
How to
ground
When the fuse needs to be
wire.
ground
contact
a
Service Center
(It may
cause
electric
shock).
electric shock!
cause
§
ground
If AC outlet with
changed,
terminal is used,
grounding
How to
is not need.
1
Ground Terminal
change
the fuse.
Disconnect the power cord.
Turn the
right fixing
2 of the washer
the left
screw
to
Out let
Fixing
at the front
to loosen it.
screw
Grounding is
not needed
§
Other
Connect the
grounding
method
Connect the
ground wire to the
ground copper plate and then
bury it under the moist ground at
least 75cm deep.
ground
ground
wire to the
terminal at the outlet.
installing it in an area
where grounding is not possible,
purchase a short-circuit breaker(15mA at operation, 7.5mA at
idle) and connect it to the outlet.
When
3
Pull forward
on
the
right panel
to open
it. Take out the fuse holder.
Remove the fuse from the fuse holder
4 and change the fuse with
Changing
new one.
the fuse
Fuse holder
ground
ground
wire
wire
Short-circuit breaker
Insert
75cm
a new
fuse into the fuse holder
5 and put it back
ground copper plate
to the
original place.
Fuse holder
§
Place where
Never connect the
There is
no
ground
grounding
ground
wire to gas
effect in the
6
Push back the
to close it
and
to the
tighten
Fixing
a
right panel
fixing screw
right.
screw
should be avoided
pipes,
water
pipes, lightning
arrest or
telephone
outlets.
plastic water pipe.
Gas
pipe
Use
Ground wire
CAUTION
a
fuse which meets the
Specifications:
specifications.
Fuse is available at Service Centers.
110~120V: 125V, 12A
220V~240V: 250V, 6A
34
35
InstaligheWr
the Washer
Maintaining
When the water
like stone
If the filter is
into the washer. Clean the filter
§
supply is bad, check substances
clogged with dirt, water cannot flow
Cleaning
Before
cleaning
sand inthe filter.
regularly.
the filter in the inlet valve
the filter in the inlet
valve, completely
Turn off the faucet and press the power switch.
1
or
Select cold & hot water and press
START/PAUSE button. Let the washer operate
for 5 seconds.
remove
3
§
the water
remaining
in the water hose.
1
Disconnect water hose, and remove filter from
the inlet valve by hand or with tools. Remove
dirt with
a
Switch off the washer and disconnect the power
cord.
Close faucet and
remove
the water
hose. Direct the hose toward the bottom and
completely remove water
2
from the hose.
tooth brush, etc.
§
2
To prevent freeze in winter
Press the SPIN button and let
it
spin
for 1 min. to
remove
water from the tub and drain
the power cord.
3
Unplug
3
Submerge
hose.
When frozen
1
Pour 50°C of hot water
faucet and
remove
on
the
the water
hose.
2
Pour 50°C of hot water inside
the tub and leave it for 10 min.
the
separated
hose
in 50°C of hot water
Maintghewsr
Then insert it back into the water inlet.
§
Cleaning
1
Press and then
the lint filter
pull
forward
the lint filter from the
tub to the
arrow
washing
direction.
2
Turn inside out and wash it to
remove
dirt.
3
Insert it back into
place("Click").
4
Connect the water hose to
5
the washer and then start
the washer. Pour 50°C of
hot water into the water
Connect the water
hose to the faucet
and check if water
is
draining.
hose.
¢"Stainless steel inner tub won't be rusted.
CAUTION
However, external
Metal
product(like hairpin,etc,)
Water with
Water
rust may
or
a
that
cling
can
to it in the
following
causes:
be rusted is left inside the tub for
lot of iron substance is used for
a
long
a
long
time.
time.
chlorine type bleach is left inside the tub for
a
long
time.
¢"If rust is
When the lint filter is
36
worn
out, etc., contact
a
LG Service Center for
a new one.
found, soak sponge or soft cloth with cleaner
(neutral cleaner) and wipe the rust.(Never use metal sponge)
37
Troubleshooting
If
a
abnormal
symbol appears
in the
display window,
check the
following
before
asking
for
ser-
vice.
SYMPTOM
SYMPTOM
ITEM TO BE CHECKED
Abnormalevel
ITEM TO BE CHECKED
sensing
Ask for service center
Abnormal faucet
water
Abnormal Is
this time, the
of
(At
lamps
[WASH], [RINSE] blink.)
Abnormal
supply
(At this time, [WATER
LEVLE] lamp blink.)
Is
the faucet frozen?
the faucet
Is water
closed?
discontinued?
supply
lowered
Is the water pressure
or the filter
water hose is connected to the cold
clogged?
valve?(In this case,
Is hot water selected when
only a cold
select cold
No power
water.)
AUTO
OFF
drainage
Is the power switch
pressed?
Is the power
connected?
plug firmly
Is power supply is correct? Is the short-circuit breaker closed?
(At this time, the lamps of
[RINSE], [SPIN] blink.)
Is the drain hose low-
Is the drain hose bent?
Is the drain hose
ered?
Is the doorsill too
frozen?
high?
No
operation
START/PAU
Abnormal
spin
Is the lid closed and
(At this time, the lamps of
[WASH], [RINSE], [SPIN]
blink.)
Opened
Is the
laundry gathered
to one side?
Is the washer tilted?
Is the tub filled with
the START/PAUSE
required
button is
water?
pressed?
amount of
Excessive vibration
and noise
during spin
lid
Is the washer installed
(At this time, buzzer sounds
without lamp indication)
38
Is the faucet closed?
Is the lid closed? If the lid is open,
generated and rinse and
alarm is
spin
cannot be
proceeded.
Is the lid closed after
setting delayed
washing? If the lid is opened, delayed
washing cannot be proceeded.
Water
supply and rinse after
pausing it during rinse or spin.
It is normal, the washer is
one
No
on
firm and level surface?
automatically correcting the laundry gathered
to
side.
special
action is needed.
39
Troubleshting
Common Sense for
§
How to
Shoe
Ink
polisher
Warm water with 1% of
ink
oxalic
§
Remove fat with benzene
or
acid(2-3 times)
Red
warm
neutral
water with oxalic
soap
detergent(according
1
to
wearing pants, spray water
in the
shape
soap
on
lightly. The pants
next morning.
2 When hanging pants,
Remove fat with benzene
acid
After
wearing
then shake them
stamping
ink
After
bleach
textile)
Rust stain
Wash in
Clothes
Keep
stain
remove
Wash
How to
Washing
knees and
will be in
hip,
good
do not bend knees. Just
hang
down.
upside
liquid ammonia(ammonia 5%)
Stemp
Blood
Cold water
Sweat
Soap
Wash
or liquid ammonia
(old stain)
(Do not use hot water. It may solidify blood.)
Red ink
Wash
Terepin oil
(old stain)
Bleach
Juice,
Neutralize with alkali
Venegar
detergent
drycleaning
cream
or
water with neutral
detergent
Remove dirt with soft cloth.
2 Moisture
volatile oils
with
a
Warm
ice
remove
special
detergent or
drycleaning
soybean
§
sauce
Wash with soap in
warm
water
domestic
use
1
clean with alcohol
For
fur is
exposed
Remove fat with
water, detergent, detergent for
benzene¡ soap
3 When
4 When
Bond
Clean with alcohol
ammonia. For oil stain,
fur is
pressed,
the whole
Wash
soap,
To prevent
bottom of
40
detergent
first test
laundry,
damage
laundry with white cloth
to
or
or
on
tightly wrung
to rain or snow, shake it to remove
alcohol
the inside of
bleach(according
laundry,
and then
out cloth or gauze soaked with benzole.
moisture, wipe it with
a
dry cloth and dry
in
a
shake it, spray
a
little bit of water,
to
remove
in
shady place
of the fur.
narrowly dented comb
a
a
to
eggs of worms and alien substances. Beat it with a rod and
repeatedly rub the fur with cotton soaked with formalin. Dry it in a
cause
Put
6 The
covering
a cover
30 min. and comb it
the
with
good
most
7 Cover
again.
fur clothes, shake off dirt and
ventilation and
insecticide with
hang
temperature and
appropriate
respectively. During rain
type of textile)
stain after
opposite direction of the wave
process again, when necessary.
dry
remove
(benzene, aceton)
stain when you do not know the
benzene
clean with wet but
fur is worm-eaten, comb with
5 When keeping
remove
fur clothes
and comb the fur in the
benzene, carbon tetrachloride, alcohol
How to
for leather.
shady place.
Lipstick
shady place for
§
leather. Clean the leather
lightly-stained clothes,
2 When
synthetic detergent
drycleaning, liquid
cream
Maintaining
Repeat
use
damage
with
Coffee,
for domestic
Remove fat with benzene
For water stain,
can
benzene
Butter
Petrolic
Solidify with
for domestic
Remove fat with benzene
or
leather clothes
Gum
Neutral deter-
ammonia, soap)
gent
water(liquid
Maintaining
1
Paint
Alcohol(benzene, aceton)
Ice
§
a
season
with
hang
it in
a
humidity
higher
than
it
on a
hanger specially designed
for fur clothes.
spacious place.
keeping fur clothes is 15°C and 50-60% humidity,
66% humidity, often ventilize the fur.
for
cloth and put it in the closet. Use
one
kind of insecticide, if
possible.
towel.
41
HowtKepClhs
Memo
Specification
986mm
910mm
636.5mm
632mm
Water pressure
:
30~1,000kPa(0.3kgf/cm2~10kgf/cm2)
Revolution
speed of
the
Revolution
speed of
the tub
wings
:
:
125rpm
Specifaton
680±50rpm
Weight : 48kg
Dimension
:
632mm(W)
Standard water amount
Standard water
The appearance and
636.5mm(D)
94L
×
:
consumption
specifications
:
×
986mm(H)
260L(2 Rinses)
may be varied without notice to raise the units
quality.
42
43
Download PDF

advertising