LG | WF-T5001PP | LG WF-T6011TH Owner’s Manual

Washing
Machine
OWNER'S MANUAL
MODEL
:
WF-T5001(~2)PC(H/P)
WF-T5011(~2)PC(H/P)
WF-T6001(~2)TC(H/P)
WF-T6011(~2)TC(H/P)
WF-T5001(~2)PD(E/F)
WF-T5011(~2)PD(E/F)
WF-T6001(~2)TD(E/F)
WF-T6011(~2)TD(E/F)
WF-T7001(~2)TC(H/P)
WF-T7011(~2)TC(H/P)
WF-T7001(~2)TD(E/F)
WF-T7011(~2)TD(E/F)
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Record model
name
and serial number of the set.
Quote this information to your dealer when you require service.
P
roduct Features
The Turbo Drum
washing machine does not operate with the lid open.
opened during wash, rinse and spin cycles, the machine will stop
automatically.
If the lid is
Fuzzy Logic Control
A built-in load
automatically detects and measures the laundry load a
microprocessor optimizes washing conditions such as ideal water consumption
and washing time.
sensor
into the Electronic Control
Advanced
technology is built
washing result.
the best
SENSING
START
Laundry
Sensor
Water Level Sensor
System which
ensures
SETTING
Optimum
Washing
WASHING
Condition
Turbo Drum
While the "Punch
AUTO
POWER
OFF
washing
+
3"
pulsator
rotates in one
direction, the Turbo Drum rotates in the opposite
direction. This creates
flow of water in both
an even
the upper and lower parts of the drum,
enhanced washing and rinsing action.
Punch
The
+
resulting
in
an
3 washing action
powerful vertical water thrust
rotating pulsator movement
improves washing performance and reduces tangles.
punch
action's
combined with the
3
Spinning mini-pulsators create powerful jets of
laundry up and down in the
drum to ensure your laundry is evenly and
thoroughly washed.
water which move the
Lint Filter
Lint and loose threads from
during
for
a
the
washing cycle
laundry generated
caught by the lint
are
filter
cleaner wash.
Auto Restart
In the event of
a
power failure, the washing machine will
is resumed.
automatically
interrupted cycle when power
Applied
models
:
WF-T5001(~2)PD(E/F),WF-T5011(~2)PD(E/F)
WF-T6001(~2)TD(E/F),WF-T6011(~2)TD(E/F)
WF-T7001(~2)TD(E/F),WF-T7011(~2)TD(E/F)
resume
its
C
ontents
Read this manual
Inside you will find many helpful hints on how to use and maintain your washer
properly. Just a little preventive care on your part can save you a great deal of time and
money over the life of your washer. You will find many answers to common problems
in the
Troubleshooting
section. If you review
our
chart of
Troubleshooting Tips first,
you
may not need to call for service at all.
Introduction
Before
Starting
Safety
to Wash
Information
4
Identification of Parts
5
Function Information
6
Preparation Before Washing
7
Use of Water,
8
Detergent,
Bleach
and Softener
Function of each Button
Washing Programs
Fuzzy
Wash
Economy
Additional Function
Options
Installation
Care and Maintenance
10
(Normal Wash)
Wash
12
12
Jean Wash
12
Wool Wash
12
Soak Wash
12
Delay Start (Reservation)
Wash
14
Option Washing
15
Other useful Functions
16
Placing
and
Connecting
Water
Connecting
Drain Hose
Grounding
17
Leveling
Supply
Method
Hose
18
21
22
Cleaning
23
Troubleshooting
Troubleshooting
25
Specification
Specification
27
4
S
information
afety
WARNING!
For your
safety, the information in this manual must be followed to minimize the risk of fire or
explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
Introducin
For your better understanding. these precautions are separated into two categories.
We urge you to pay special attention to them in the interests of your own safety, and
machine
against damage:
Caution
Violation of these
Attention
Following
these
guidelines could result in
guidelines
serious
The
is not intended for
use
infirm persons without
two persons should move it.
Do not install the washer where it is
exposed to sunlight, wind, rain, etc.
The appliance must be positioned so that
the plug is accessible
sure to ground the earth wire or connect it
ground detector after you put the power cord
Make
Make
Supply
to
and
an
feet under this
place any rugs or heavy material
the power cord.
Since the machine is heavy, a minimum of
Power
into
or
over
source.
cord
against damage.
Do not
Young children should be supervised to ensure that
they do not play with the appliance.
The base opening must not be obstructed by
carpeting when the washing machine is installed on
a carpeted floor.
a
injury.
Do not put your hands
machine.
by young
supervision.
Do not install the washing machine in a damp place.
Keep the washing machine away from fire or heat
or
fatal
Attention
appliance
children
or
will protect your machine
Caution
Installation
protection of your
outlet.
sure
plug
the power cord is free of dust
properly so that the cord will
it in
not move.
When the power cord is loose, do not use it.
Do not damage the power cords.
Do not plug many cords into
time.
one
Do not touch the power cord with wet
hands.
outlet at the
same
If the power cord or fuse is damaged, it must be
replaced by the manufacturer or its service agents
or
similarly qualified people in order to avoid a hazard.
If the appliance is supplied from a cord extension
set or electrical portable outlet device the cord
extension set or electrical portable outlet device
should be positioned so it is not subject to splashing
or ingress of moisture.
Operation
When you take out the
fall into the washer.
laundry, be careful not to
?
Do not put hands into the rotating tub.
Do not sprinkle water over the buttons.
Make
sure
the lid is closed
activating the machine.
more than 50˚C(122˚F)
?
Do not pour
into the tub.
?
Do not wash any
during operation of the
Do not put heavy objects on the machine.
Unplug the cord when the machine is not in
Do not press the buttons with sharp objects.
Check the hose connection and open the tap
before
spin cycle.
Maintenance
?
?
use.
?
water
waterproof materials.
Do not pour corrosive materials or bleach
over the washing machine. It will cause
damage to the power cord or the machine.
Never disassemble or remodel the washer
and power cord by yourself. Only a
qualified technician should work on the
machine.
5
I
dentification of Parts
Body
Power cord
Water
supply hose(1
Powder
Bleach
detergent
EA
or
2EA)
box
dispenser
Inner tub
Control
panel
Lint filter
Drain hose
for pump model
Drain hose for
Adjustable leg
non
pump model
Accessories
Water
supply
hoses
Drain hose
or
or
1 Each for cold and
hot water
Note
Part
can
be different
according to the model.
Anti-rat
cover(option)
Introducin
6
Function
Information
Our machine
types of
BeforStaingWsh
Different
provides
laundry.
various
washing
methods which suit various conditions and
types of laundry washing
Fuzzy
(Normal) Wash
Use this
The
Program for normal clothes except for woolen clothes and lingerie.
automatically detects the quantity of laundry and selects the appropriate
washing time, rinsing time and spinning time. (refer to p12 )
water
sensor
power,
Economy
level, wash
Wash
Economy wash can be
selected to wash
lightly
soiled clothes of less than 3.0
kg in
a
short time. (refer
to
p12)
Jean Wash
Thick and
(refer
to
heavy clothes or those which are excessively dirty like jeans or working uniforms can be washed.
p12)
Wool Wash
Delicate clothes
(lingerie,
wool
etc.) which
may be
easily damaged can be washed. (refer to p12)
Soak Wash
Soak Wash
and
Other
can
be selected to wash
grime. (refer
washing
to
heavily
soiled
laundry by soaking
in water for
some
p12)
methods
Delay Start (Reservation)
Wash
Delay Start (Reservation) Wash is used to delay the finishing time of the operation.
Delayed Start washing can be set according to preference. (refer to p14)
Option
Wash
Spin, Rinse/Spin, Rinse, Wash/Rinse,
and Wash
only options can
selected. (refer
to
p15)
time to
remove
dirt
7
Before
Preparation
Washing
BeforStaingWsh
Sorting
results, different fabrics need to be washed in different ways.
Normal,
(Heavy,
Light)
Separate clothes according to amount of soil
COLOR (Whites, Lights, Darks)
Separate white fabrics from colored fabrics.
To get the best
SOIL
LINT
(Lint producers, Collectors)
Caring
?
before
Check all
such
as
Separate lint producers
and lint collectors.
loading
pockets to make sure that they are empty. Things
and keys can damage
nails, hairclips, matches, pens, coins
both your washer and your clothes.
?
Close
zippers, hook and strings to make sure that these items
don't snag
?
?
on
other clothes.
.
Mend any torn garments or loose buttons. Tears
become larger during washing.
Remove any loose brassiere wires
as
or
holes may
they can damage your
washing machine and clothes.
?
Pre-treat dirt and stains.
?
Make
?
Check the
sure
the clothes
are
WIRE
washable in water.
washing instructions.
Pretreatment
detergent dissolved in water onto stains like collars
help shift dirt.
Treat stains AS SOON AS POSSIBLE. The longer they are left the
harder they are to remove.
Brush
a
little
and cuffs to
Light
and
Large-
size
clothing
Clothes like downs and woollens
Long laundry
net and
are
light weight, large and float
wash them in
a small amount of water.
easily.So
nylon
If the laundry floats during the wash cycle, it may become damaged.
Use dissolved detergent to prevent the detergent from clumping.
use a
item
nylon nets for long, delicate items.
laundry with long strings or long length, a net will prevent
tangling during washing.
Fasten zippers or hooks on items before washing.
Nylon net is not supplied by LG.
Use
For
8
Use
BeforStaingWsh
Using
of Water,
Bleach and Softener
Detergent,
water
Amount of water
This machine detects the
quantity of laundry automatically,
WATER.DETERGENT
then sets the water level and proper amount of detergent.
When you select a wash program, the water level and amount of detergent
will be shown
The
on
the control
following table
used)
panel.
under3.5
over3.6kg
Water Level /
Amount of Water
kg
under2.0
L 46l
Ex 55l
When the water level is
same
be
shows the amount of water.
Laundry Load
though the
(to
EX-LARGE
LARGE
MEDIUM
SMALL
on
on
the
kg
S 24l
M 33l
it may differ depending
the control panel.
automatically detected,
water level is indicated
under1.0
kg
quantity of laundry even
Water temperature
The machine sets the
You
can
change
Using Detergent and
Amount of
appropriate temperature automatically according to the wash program
by pressing the WATER TEMP button. (refer to p10)
.
the water temperature
Fabric Softener
detergent
When you select a wash program, the water level and the amount of detergent will be
shown on the control panel. The amount of a cup in the diagram is about 40g for
concentrated
detergent.
For the correct amount of detergent, refer to
Available
detergent manufacturer's instruction
.
Detergent Type
that
Synthetic detergents
yield
liquid detergent is used,
When
a
WATER.DETERGENT
low level of foam
mix it with water
are
(1:1)
recommended.
and pour it into the bleach
dispenser.
EX-LARGE
LARGE
MEDIUM
SMALL
Attention
If excessive
pollution,
detergent is used, the rinse will not be as clean and efficient. Also, it could cause environmental
it accordingly.
so use
9
Available Fabric Softener
Do not
For
Type
concentrated fabric softener. This may cause some problems in automatic
details refer to the softener products instructions for use.
use
more
dispensing.
Depositing Detergent
Powder
Open the detergent dispenser and deposit the
appropriate amount of detergent
Detergent dispenser.
Where you
deposit the
.
detergent
Depositing
Fabric softener
?
Don't use softener with
rinse water
?
When
fresh
?
?
?
detergent.
Use softener in last
using dispenser, dilute softener(30ml)
with
water(30ml)
When filling dispenser, do not
It may stain clothes.
Never pour fabric softener
It may stain them
splash or overfill.
directly on clothes.
If
spotting occurs, wet and rub hand
dishwashing liquid (or mild bar soap)
and rewash.
Note
Fabric Softener will be inserted
Using
Bleach Check fabric
Use
oxygenated
labels for
care
Available Bleach
automatically during the final rinse.
special instructions.
Type
bleach.
Powdered bleach should mixed with water and then be
For
more
details refer to the
Depositing
products
instruction for
deposited into
the tub.
use.
Bleach
Separate the laundry to be bleached and deposit
liquid bleach into the Bleach dispenser.
The dispenser dilutes liquid chlorine bleach before
Bleach
dispenser
it reaches into your wash load.
Attention
Do not insert bleach
or
fabric softener
directly onto laundry. This may affect colors or damage clothing
or acids such as vinegar and/or rust remover. Mixing can
Do not mix chlorine bleach with ammonia
produce
a
toxic gas which may
cause
death.
BeforStaingWsh
10
F
BeforStaingWsh
unction of each Button
Water
temperature button (option)
(indication of detergent amount)
Use to select water temperature.
Pressing the button allows you to select
Cold
Warm
(Hot&Cold)
Cold respectively. Default
Water level button
?
Hot
adjust the water level as required. The appropriate
detergent is shown next to the water level in
the WATER-DETERGENT diagram
Water level is automatically selected for fuzzy (normal)
and jean programs.
The following settings are indicated as the button is
EX-LARGE
SMALL
pushed LARGE
Use to
amount of
setting is Cold.
?
LARGE
MEDIUM
WATER.DETERGENT
WARM
HOT
COLD
EX-LARGE
LARGE
MEDIUM
SMALL
DELAY
HOUR
TIME
LEFT
MIN.
DELAY
START
Delay Start (Reservation)
delayed finishing time.
?
Use to set
?
The time increases when the button is
?
The
?
pushed.
following settings are indicated as the button
ispushed3 4 5 ...11 12 14 16 ...46
48
?
a
Process button
button
Use to select SOAK,
WASH, RINSE and
SPIN functions
desired.
3 HOUR.
To cancel
delay time,
turn
the power switch off.
(RES=DELAY)
(refer
to
14p)
Note
According to the machine model, figure of control panel may be different.
as
11
Time
?
?
?
left, Delay Start (Reservation), Alarm indication
Time left
-
During operation, the remaining time is
Start/ Pause button
?
indicated.
Delay Start indication (Reservation) When delay start (reservation)
program is selected, it indicates the finishing time. (RES.=DELAY)
-
Alarm indication -When
indicate the
abnormality.
an error
For
occurs,
example,
an error
?
?
message appears to
indicates that the lid is
AUTO OFF
IN.
FUZZY
ECONOMY
JEAN
WOOL
SOAK
WASH
RINSE
SPIN
or
pause the
washing process.
Repeats start and pause by
pushing the button.
The power goes off
automatically 10 minutes
after
open.
OUR
Use to start
stopping.
AUTO OFF
(Power) button
START
?
Use to turn the power
on or
off.
PAUSE
?
?
Push
again
on or
off
and power goes
The power goes off
automatically about 10
seconds after the wash is
finished.
Child lock function
Use to lock
or
Program
unlock the control
buttons to prevent
from
settings
being changed by a child.
To lock, push the PROCESS
and
PROGRAM buttons
simultaneously and to unlock
push them one more time during
the washing process.
(refer
to p
16)
?
?
?
button
Use for
selecting wash program.
This button allows you to select 4 different programs
for different kinds of laundry and dirtiness.
program selections light up in sequence
FUZZY (NORMAL)
ECONOMY
WOOL
FUZZY
program by
(NORMAL)
pressing
the button.
etc.
as
follows:
JEAN
Select the desired
BeforStaingWsh
12
Washing Programs
WashingProm
AUTO OFF
Add
the
Washing
Programs
Add
the detergent
laundry
Fuzzy Washing
(Normal Wash)
1
2
4
Used for normal loads, this mode
Add the appropriate
quantity of detergent as
indicated by the water
level next to WATERDETERGENT.
Or follow the detergent
manufacturer's
instructions
automatically selects the most
appropriate conditions and
completes the sequence in one
operation. The built-in sensor
detects the size of the load and the
ideal wash power and wash, rinse
and spin times are set accordingly
Economy Wash
washing lightly
1
3
2
5
Use this mode when
solided clothes for
a short
time. The
Select the
ECONOMY
program on the
Control panel.
weight should be under 2.0kg.
Jean Wash
Use jeans program when
washing
1
heavy, thick,
laundry such as jeans and work
5
2
3
and extremely dirty
Select the
JEAN program
on the Control
outfits.
panel.
Wool Wash
Use this program for washing delicate
1
3
as lingerie and woolens.
(wash only "water washable" clothes)
Before washing your woolens check
the care label for the washing
5
2
fabrics such
WOOL
program on
the Control
instructions.
(wash
Use neutral detergent
appropriate for the
laundry.
When washing
Select the
woolens use a mild
detergent recommended for washing wool.
panel.
only water washable clothes)
1
4
2
3
6
Soak Wash
Use this mode for washing
excessively dirty laundry by soaking
in water for some time to
remove
proteins and fats. 'SOAK' mode can
be used with all
washing programs
simultaneously except for "WOOL"
program.
SOAKwill
not work in
WOOL
Program.
Keep pressing the PROCESS button until the SOAK light is on and then WASH,
RINSE, SPIN lights are on simultaneously.
If necessary, select the desired washing process from
(SOAK+WASH+RINSE+SPIN), (SOAK+WASH+RINSE),
(SOAK+WASH) manually.
SOAK
WASH
RINSE
SPIN
13
Close the lid
3
Caution & Note
Finish
6
5
If water is already in the tub, or putting wet
laundry into the tub before starting will
The pulsator rotates for 8
Water will be supplied
When the wash
increase the water level.
seconds to detect the
for 2 minutes after the
With
laundry load.
start of the wash to
program ends, the
buzzer will ring for 10
Then the water level and
supplement the water
seconds before the
the amount of detergent to
the laundry has
Power goes off
be used will be shown and
absorbed.
automatically.
lightweight bulky loads, water level
can
be set low.
Changes to water temperature (hot/cold) and
are possible during operation.
(refer to p 10)
wash level
water will be supplied.
4
6
7
4
6
7
When
setting the water level manually, do not
prevent damage to
laundry.
Washing with hot water may damage the
laundry (Water is set to cold automatically).
Ensure that the load is under 2kg
In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing may
set to MEDIUM to
4
6
7
still contain
some
water. This is normal.
Soak Wash cannot be selected for the Wool
Wash program.
5
The water level and the
amount of detergent to be
used will be shown and
water willl be supplied.
7
8
WashingProm
14
elay Start (Reservation) Wash
D
AditonalFucOps
Delay Start (Reservation) Wash is used to delay the finishing time of
The hours to be delayed can be set by the user accordingly.
The time on the display is the finishing time not the start time.
the
operation.
,
1
Press the POWER button to turn power
on.
AUTO OFF
2
Press the PROGRAM button to select the
washing program.
Select the program for laundry on the Control
This method will not work in Wool Program.
3
Delay Start (RESERVATION)
delayed washing is to be completed.
Press the
How to set the
button to set the time when the
delay time.
you'd like your wash to finish at 9
a.m. set the time as in the figure below.
When you push the button the reservation time changes 3 4
...12
14
16
48 3 repeatedly.
Example
:
It's 7
a.m. now.
Add the
DELAY
HOUR
TIME
LEFT
MIN.
If
...
4
panel.
The
detergent.
5
(RES.=DELAY)
appropriate quantity of detergent marked next to
water level of
the
WATER-DETERGENT.
When the lid is open the machine will not operate, and
alarm signal will remind you to close the lid
5
Add the
laundry
and press the START/PAUSE button.
When you be press the START/PAUSE button the
blink.
6
Water will be
Finish
The
wash to
washing will be finished according to
the
delayed time.
Note
If the lid is open, the machine will not
work, and
washing program, spinning time,
(RESERVATION)button
When the
laundry
spinning program (The laundry
.
alarm
water level
and select the desired
cannot be taken out
an
immediately
signal will
alarm to remind you to close the lid.
hot/cold manually, press the Delay Start
Then press the START/PAUSE button.
or
option.
after the wash program ends, it is better to omit the
a long time after spinning.)
will be wrinkled if left for
light will
supplied for 2 minutes after the start of the
supplement the water the laundry has absorbed.
Close the lid.
To select
an
15
Option Washing
When you
only
need the Wash, Wash/Rinse
or
Rinse
cycles,
these
can
be set
manually
1
Press the AUTO OFF
(Power)
button to turn power
on.
AUTO OFF
2
Wash
Wash+Rinse
,
,
Rinse
,
Rinse+Spin
,
Press the PROCESS button until above
light is on. ( refer to p11)
Spin only options
Option Washing
When you want to only drain, wait until the water in the
washing tub drains completely and then, turn off the
power.
3
Press the WATER LEVEL button, to control the water level according to the
laundry. If you do not choose anything, it is set the LARGE water
level automatically.
(refer to p10)
amount of
4
Add the
5
Press the START/PAUSE button.
6
Add the
laundry
into the
detergent
washing
tub.
and close the lid.
Note
?
When
a
Wash, Wash/Rinse or Rinse only option is selected,
after the wash is
completed the water will not be
drained off, If you wish to drain the water, press the SPIN button and wait until the water in the tub has drained
completely. Then press the START/PAUSE button
.
?
?
If you do not
specify the water level, then Medium will be automatically
If only Rinse is
selected,
the process will start from Water
Supply.
selected.
AditonalFucOps
16
O
AditonalFucOps
ther Useful Functions
Child Lock Function
If you want to lock all the
child lock
keys to prevent setting from being changed by
a
child,
can use
you
the
option.
How to Lock
1
2
Press the POWER button.
AUTO OFF
Turn Power
Press the START/PAUSE button to start
washing.
After all
3
on.
washing conditions
are
set
according to the manual.
Press both the PROCESS button and the PROGRAM button
?
simultaneously.
During the wash program, all the buttons are locked
until washing is completed or until the child- lock
function is deactivated
?"
"
and the
manually.
remaining time will be displayed
alternately in child-lock mode.
How to Unlock
If you want to unlock
during wash, press both the PROCESS
and the PROGRAM button
simultaneously
again.
Note
In child-Lock
mode, all process light will blink.
Auto Restart
Although the machine will not work during a power failure or if power is interrupted,
it will start again automatically from the point in the cycle when it stopped
Applied
Mute
models
:
when power is resumed,
WF-T5001(~2)PD(E/F),WF-T5011(~2)PD(E/F)
WF-T6001(~2)TD(E/F),WF-T6011(~2)TD(E/F)
WF-T7001(~2)TD(E/F),WF-T7011(~2)TD(E/F)
Option
If you want to
use
the
washing machine
without alarm
signal sounds, press both the
WATER LEVEL and
PROCESS buttons simultaneously.
To make buzzer
time.
work, press both the WATER LEVEL and PROCESS buttons simultaneously one more
17
and
Placing
1
Leveling
Place the machine
on a
flat and firm surface which allows proper clearance.
We suggest a minimum clearance of 2cm to the
left sides of the machine for ease of installation.
At the
right side a minimum clearance of
suggested.
rear
10cm is
and
more
than 10cm
more
than
2cm
more
than
10cm
2
Check that the machine is level
Open the lid and look from above to
same as
3
see
Top
view of the machine
if it is
shown.
Leveling
the machine
Lift the front of the
washing machine and twist
Adjustable Leg
washing machine is
placed evenly.
until the
the
Adjustable legs
Installing the Anti-Rat Cover (option)
The anti-rat cover should be affixed
firmly from the back of the washer
UP
Caution
If the power is supplied from a cord extension set or generator, the cord extension set or electrical
portable outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.
Instal ion
18C
onnecting
Before
Water
connecting
the Water
sure
Connecting
Water
Normal
Supply
Hose
supplied may vary from country to country, Make
tap, and the orange inlet hose to
tap.
Supply
Hose to water
Type
Untighten
the
Fixing
tap
(Normal tap without thread &
screw
type inlet hose.)
Rubber
screw
Untighten the screw of the connector so
tap can be placed in the middle.
2
tap, check the hose type and
to connect the blue inlet hose to the cold water
the hot water
1
Hose to the water
Supply
then choose the correct instruction here under.
Note that the Water
Instal ion
Supply Hose
packing
that the
screw
Connector
the connector to the tap
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4
3
screws.
Attach the water
to the connector
Push the water
supply
hose connects
supply hose vertically upwards
that the rubber seal within the hose
can
securely
Connector
so
adhere
completely to the tap.
Water
Hose
4
Fixing
the connector to the water
supply
hose
Attach the water
then
5
supply hose to the connector and
tighten it by screwing it to the right.
Check the connection of water
After
supply
connecting the hose, open the tap to check
for any water leakage.
If the connection leaks, close the tap and start
again from step
1
hose and the connector
Supply
19
Normal
1
Type
(Normal tap without thread &
Middle connector from Water
Separate
Supply
Separate Middle connector from the Water
Supply Hose by pulling the Pressing Rod and the
Pressing Handle that is attached to the Water
Supply Hose while pressing them.
one
touch type inlet hose.)
Hose
Middle
Fixed Sticker
connector
Pressing
Handle
Pressing
Rod
Water
2
Supply
Hose
Loosen the fixed nuts to connect the connector to the tap
Untighten the screw of the connector so
tap can be placed in the middle.
that the
Rubber
packing
screw
Fixed sticker
Note
In
case
tap is
too
Guide
large.
plate
If the tap diameter is too large or is square,
untighten the 4 screws and remove the guide
plate.
3
Then follow
Rubber
packing
step1.
Fixing Connectors to
the
Tap
Connector
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
4
Fixing Upper Connector
and Middle Connector
Remove the fixed sticker in between the
and Middle Connectors.
by holding
one
5
Tighten the connectors
connector and
connector to the
Connecting
Connector
Upper
Middle
twist middle
Connector
Fixed sticker
right.
Middle Connector and Water
Supply
pressing rod of the Water Supply
separated from middle connector
Step1) and then join it to the middle
Connector
Middle
Connector
Hose
Press down the
Hose which
(refer to
was
Pressing
rod
connector.
Water
6
Check for water
After
leakage
the
hose, open the tap to check
connecting
for any water leakage.
If the connection leaks, close the tap and start
again from step 1.
skip step 1, water leakage may occur.
If you
Supply
Hose
Pressing
handle
Instal ion
20
C
Instal ion
onnecting
Screw
1
Water
Supply Hose
Type
Attach the water
hose to the tap.
supply
Push the water supply hose up so that the rubber
packing within the hose can adhere completely to
the tap.
Water
tap
Rubber
Water
2
Connect the water
supply
Packing
Supply
hose to the tap.
Connect the water
tighten it by
3
supply hose to the tap and then
screwing it to the right.
Check water
leakage.
After
connecting the hose, open the tap to
for any water leakage.
Connecting
Water
Supply
Connect the water
the
check
Hose to the machine
supply hose to
inlet valve of
and then lock it by
washing machine,
connecting part.
turning
the hose
Check
to
see
if there is
a
rubber seal inside
Hose connector
the connector.
Rubber seal
Hose
21
Connecting
Before
Drain Hose
connecting
Drain Hose, check your Drain Hose model and choose the
correct instructions of
Pump
followings.
Instal ion
Model
1
Fit the machine end of the drain hose to the outlet
2
Put the other end of the drain hose over the
of the drain pump and
tighten the clamp.
standpipe or
wash tub.
Hose
Guide
Within 50mm
0.9~1.2m
Drain Hose
Note
To prevent siphoning, the drain hose should not extend more than 50mm from the end of the hose
The discharge height should be approximately 0.9
1.2 m from the floor.
~
Non-Pump
1
Before
Model
connecting
Ensure that the hose
clip is
set
as
indicated here.
Clip
2
Connect the Elbow Hose
Push the elbow hose toward the
body of the
washing machine.
3
Place the Drain Hose
change the direction of the hose, pull out the
change the direction.
Repeat Step2.
To
elbow hose and
guide.
22
G
CarendMitc
rounding
Method
Earth wire should be connected.
If the earth wire is not connected, there is
caused by the current leakage
possible
a
danger of
electric shock
.
Grounding
Method with Ground insert space Terminal
If the AC current outlet has
ground terminal, then
separate grounding
required. Note that AC
outlet
power
configurations may differ from country
a
is not
to
Other
Ground Terminal
country
Grounding
Outlet with
Method
Burying Copper
bury it
more
terminal.
Plate
Connect the Ground Wire
Plate and
ground
to
a
Ground
Copper
ground.
than 75cm in the
Ground Wire
75cm
Using Ground
Ground
Wire
Copper
ground Wire to the socket provided
exclusively for Grounding.
Plate
Connect the
Using Short Circuit
Ground
Wire
Breaker
If grounding methods described above are not
possible, a separate circuit breaker should be
employed and installed by a qualified electrician
Short-circuit
breaker
Caution
?
?
To prevent a possible explosion, do not connect ground to a gas pipe
Do not connect ground to telephone wires or lightning rods. This may be
storms
?
Connecting ground to plastic has
?
Ground wires should be connected when
no
effect
an
extension cord is used.
dangerous during electrical
23
Cleaning
When water
supply
into the tub is not clean
the filter is
clogged with particles(Such
occasionally.(The figure of power cord and
country)
or
clean the filter in the inlet valve
sand),
tap may vary according to
as
water
the
To Clean the Filter in the Inlet Valve
Close the tap before
1
turning off the
water from the machine
removing the water
supply hose pull out the filter.
Then
use a
pulling out the cord.
completely.
After
3
Turn off the power before
2
power.
Select both hot/cold and then press the
[START/PAUSE] button to remove
4
Replace the filter after cleaning it.
brush to clean
the filter.
Caution
Before
cleaning the filter, the impurities in the water supply hose should be removed.
To Clean the Lint Filter
1
Pull out the lint filter from
2
Turn the net inside out
the tub in the direction
to clean the filter and
shown below.
rinse it with water.
3
Replace- the filter to the
original location. Push the
lip of the filter until a pop
sound is heard.
Note
?
If the lint filter is torn
To Clean the
1
damaged, purchase a new
one
from LG service center.
Pump casing (for pump model)
Unfasten 4
back
or
screws
of the
cover.
2
Turn the cap as shown in
diagram and unfasten it.
Remove
as
foreign objects
pin, button, coin, etc
3
Reassemble the cap to
the arrow direction and
fasten it.
such
(Bottom view)
(Bottom view)
Self-cleaning function(for pump model)
In the initial stage of every washing machine process, the drain pump works for 3~5seconds to pump out
water with dirt from the washing tub. It helps to keep the wash tub clean and improve pumping ability.
Caution
?
Check if water leaks after
reassembling. (The
Rubber
ring
is in the
cap)
CarendMitc
24
C leaning
CarendMitc
WHEN THERE IS A FEAR OF FREEZING
1
Close the water taps and
2
Remove the water which remains in the water
3
Lower the drain hose and drain the water in the bowl and the drain hose
remove
the Water
Supply Hose.
supply.
by spinning.
IF FROZEN
and immerse it in hot water at approx.. 40 ˚C.
1
Remove the water
2
Pour approx.. 2 liters of hot water at approx.. 40
3
Connect the water
supply
and
supply hose,
supply hose to
drainage of water.
Wash Inner-tub
the bowl and let it stand for 10 minutes.
the water tap and confirm that the
washing machine performs
the
Leave the lid open after washing to allow moisture to evaporate. If you want to clean
the inner-tub use a clean soft cloth dampened with liquid detergent, then rinse. (Do
not use harsh or
Inlet Hoses
gritty cleaners.)
Hoses
connecting washer to faucet should be replaced every 5 years.
Immediately wipe off any spills. Wipe with damp cloth. Try not to hit
sharp objects.
Exterior
Long
˚C, into
Vacations
Be
sure
water
be below
supply
freezing.
surface with
is shut off at faucets. Drain all water from hoses if weather will
SCRUD
Scrud is the name given to the waxy build-up that can occur within any washer when the fabric softener
into contact with detergent. This build-up is not brought about by a fault in the machine.
comes
If scrud is allowed to build-up in the machine it
unpleasant smell in your washer.
If you wish to
?
?
?
?
Using fabric
Clean
use
fabric softener
the
dispenser,
do not
dispenser
as soon as
the
we
result in stains
on
your clothes
or an
recommend.
splash or overfill.
cycle has
finished.
Clean your machine
regularly
Cold water
increases the chance of this
washing
can
build-up occurring. We recommend
a warm or
hot wash at
regular
intervals e.g. approx. every 5th wash.
?
Fabric softener of thinner
consistency is
less
likely to
leave residue
on
the
dispenser and contribute to a build-up
CLEANING THE INSIDE OF YOUR WASHER
?
?
?
Fill your machine with hot water. Add about two cups of
a
powder detergent that contains phosphate.
Let it rotate for several minutes.
Stop the machine,
drain the machine and
run
We do not recommend that you wash clothes
the machine
through a regular cycle.
during this procedure.
25
Troubleshooting
Look for your
this will
problem below,
you the
give
telephone
to
having
then check the
things we suggest. More often than not,
you'll be able to carry on without
to your problem. And
service
center.
your
answer
WASH PROBLEM
Possible Causes
Problem
Lint or residue
on clothes
Incorrect
sorting
Washing
too
long
What To Do
Separate lint producers
?
?
Wash small loads for
a
from lint collectors.
shorter time than
larger
loads.
Detergent
on
clothes
Detergent not
dissolving
?
Try using less detergent
?
Use
?
Try a liquid detergent.
Try pre-dissolving the detergent
?
Black spots
clothes
on
Incorrect use of
fabric softener
Dye transfer
Snags, holes,
tears, rips or
excessive
wear
Pins, snaps, hooks,
sharp buttons, belt
buckles, zippers,
and sharp objects
left in pockets
Undiluted chlorine
bleach
?
?
?
warmer
When
filling dispenser, do
Never pour fabric softener
laundry
dirty
out
splash or overfill.
directly on clothes.
not
Pre-treat stain and rewash.
lightly colored items from dark colors.
dry
separately
Sort whites
?
Wash and
?
Fasten snaps, hooks, buttons, and zippers.
Remove any loose brassiere wires.
?
or
non-colorfast clothes
objects in pockets and sharp buttons.
(which snag easily) inside out.
?
Remove
?
Turn knits
?
Check bleach
package instructions for proper
amount.
Never add undiluted bleach to wash
clothes to
comes
temperature.
?
?
The
water
come
or
allow
in contact with undiluted bleach.
Water temperature
is too cold.
Use
Stain is not pretreated
detergent dissolved in water onto stains
help shift dirt.
Wash stains as soon as possible. The longer they are
left the harder they are to remove.
Washer is
overloaded
Did you load too much into the machine?
Incorrect
White clothes
are
Separate light
and
sorting
warmer
Brush
a
water
temperature
little
like collars and cuffs to
better washed
heavily
separately.
soiled items.
Troubleshting
26
T roubleshooting
Before
Troubleshting
calling for
Symptom
Water Supply
Failure
service check the
Error
problem against
Message
the list belows.
Check up
.
.
.
.
.
Is the water tap shut off?
Is the water supply cut off ?
Is the tap
or
water
supply hose frozen
?
Is the water pressure low or is the filter of the inlet
valve clogged with impurities?
Is Hot/Cold selected to Hot when the hose connected
is Cold?
.
Drainage
Failure
Is the Cold hose connected to Hot?
.
Is the drain hose
.
Is the drain hose bent
.
Is the internal part of the hose
positioned correctly?
or placed too high?
or
drain pump
(only pump model) clogged with impurities?
.
Spin
Failure
Door(Lid) Open
Internal sensing
failure
Power failure
Overflow failure
Check if electric power has gone off.
.
Is the
laundry evenly balanced?
.
Is the
washing machine placed on a flat surface?
.
Is the lid closed?
.
Please call your nearest LG Electronics service center
for help.
27
Specification
Specifaton
H
D
W
Model
WF-T5001(~2)PC(H/P/D/E/F),WF-T5011(~2)PC(H/P/D/E/F)
WF-T6001(~2)TC(H/P/D/E/F),WF-T6011(~2)TC(H/P/D/E/F)
WF-T7001(~2)TC(H/P/D/E/F),WF-T7011(~2)TC(H/P/D/E/F)
Weight
32
Size
540(W)x540(D)x850(H) WF-T5001(~2),T6001(~2),WF-T7001(~2)
kg
540(W)x540(D)x890(H) WF-T5011(~2),T6011(~2),WF-T7011(~2)
Water tab pressure
30 -800 kPa (0.3 -8
kgf /cm2)
P/No.: 3828EA3003N
Download PDF