LG | WP-8003 | LG WP-8003.CASABE Owner’s Manual

Washing Machine
OWNER'S MANUAL
MODEL : WP-9030/9031/9220
WP-9032/9033/770/9224
WP-951S/1020/1021S
WP-1220/1221S
WP-9521/9526S
WP-9250/9251/9256
WP-90050/92082
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this
information to your dealer when you require service.
This washing machine is designed and manufactured for
household use only.
P/No.: MFL33753001
CONTENTS
IMPORTANT INSTRUCTIONS --------------------------------------------5
SAFETY MEASURE ----------------------------------------------------------6
PARTS IDENTIFICATION -----------------------------------------------7~8
INSTALLATION-----------------------------------------------------------9~10
PREPARATIONS BEFORE WASHING --------------------------------11
HOW TO WASH--------------------------------------------------------------12
HOW TO RINSE---------------------------------------------------------13~14
HOW TO SPIN----------------------------------------------------------------14
AFTER FINISHING ---------------------------------------------------------14
REFERENCE-----------------------------------------------------------------15
CARE AND MAINTENANCE-----------------------------------------16~17
TROUBLESHOOTING GUIDE -------------------------------------------17
SPECIFICATIONS ----------------------------------------------------------18
3
IMPORTANT INSTRUCTIONS
1.
Before operating machine read the instruction manual
carefully.
2.
Always keep the machine on the floor level.
3.
During operation machine should be kept perpendicular to
the slope of the floor to avoid motion.
4.
Before operating properly earth the machine, to avoid
electric shock.
5.
When not in use take the power cord out from the socket.
6.
During spinning and drain check that drain hose is
lowered.
7.
Before putting clothes in the Wash Tub check the pockets
thoroughly for Coins, Keys and other objects.
8.
Transfer the clothes from Wash Tub to Spin Dryer Basket
one by one.
9.
In case you notice excessive vibration or abnormal noise
during spinning, immediately open the Spin Dryer Cover
and rearrange the laundry evenly.
10. In case of any doubt contact the nearest service center or
Dealer.
5
SAFETY MEASURE
Manufacturer is not responsible for accidents caused by the user as a result of not
following the user’s guide.
WARNING
In Operation
l
Installation Area
Do not insert the
hand inside the spin
dryer basket while
the machine is in
operation.
(Do not let children
climb on the machine
or climb into the tub.
Injury may occur)
l
Switch Area
l
Electric Outlet
Avoid watering on the
switch area. It may
cause electric shock
or fire.
l
Volatile Material
l
Avoid area exposed
to snow, rain, or
where humidity is
high. It may cause
electric shock.
Avoid connecting
several electric
devices to single
outlet. It may cause
fire.
Heat
Do not use volatile material
such as Benzene,
Gasoline, bug killer. Do not
leave strong alkaline
substance such as bleach
inside the tub. Damage on
plastic surface and rubber
parts may occur.
l
Avoid electric heater,
candle light, cigarette
light, bug smoker, etc.
near the machine. It may
ignite or deform plastic
part
Power Cord
l
If the power supply cord is damaged, it must only be replaced by a repair shop
appointed by the manufacturer, because special purpose tools are required.
Hot Water
l
Avoid using hot water
over 50°C. It may
deform plastic parts or
cause malfunction.
Power Cord
l
Installation
l
Install the washing machine
on a horizontal support.
Otherwise, it may cause
vibration and noise
l
Plug out the power supply
cord, when cleaning or not
using the washing machine
for a long time.
Do not treat the power
supply cord with your
wet hand
6
PARTS IDENTIFICATION
Control Panel
4
1
2
6
7
6
7
WP-9030
WP-9031
WP-9220
WP-90050
Water Selector
3
5
4
WP-9032
WP-9033
WP-770
WP-9224
1
2
Off
5
40
10
Hot
Cold
15
Water Selector
3
4
WP-951S
WP-1020
WP-1021S
5
7
1
2
6
Off
5
40
10
15
3
WP-1220
WP-1221S
WP-9521
WP-9526S
WP-9250
WP-9251
WP-9256
WP-92082
4
5
1
2
6
7
Off
5
40
10
15
3
1. Hot water inlet
Select this inlet when opting for hot water wash.
2. Cold Water inlet
Select this inlet when opting cold water wash.
3. Water Selector
Select "WASH" to supply water for washing and rinsing and
"SPIN" for spin shower rinse.
4. Wash Timer
Select the desired time for soaking, washing or rinsing.
(Soaking facility is not available in WP-770/9030/9031/
WP-9220/9224/9521/9032/1020/1220/9250/9251/90050/92082)
5. Wash Selector
Set the Selector to "GENTLE", "NORMAL", "STRONG"
according to kinds and quantity of the laundry.
6. Drain Selector
Select "WASH RINSE" for washing and rinsing, and
"DRAIN" to drain the water from the tub.
7. Spin Timer
Select the desired time for spinning. The max. limit is 5 min.
Don't rotate the knob more than prescribed limit.
(Please do not match this figure with model as it may be different from your model. These are schematic diagrams only.)
7
PARTS IDENTIFICATION
Inlet Hose
Accessories
Safety Cover
WASHING
COVER
SPIN DRYER
COVER
SAFETY
COVER-2
PANEL
OVER FLOW
FILTER
SPIN DRYER
BASKET
ROTATION
FILTER-C
EARTH WIRE
(For models with
two prong plug)
COLLAR
SCRUBBER
TUB
SAFETY
COVER-1
PULSATOR*
POWER CORD
( Please do not match this figure with model as it may be different from your model. These are schematic diagrams only.)
Wash Timer (Only for WP-9033/951S/1021S/1221S/9526S/9256 exists with soak option )
Off
5
40
10
15
Wash Timer
The wash timer can be used for SOAK, WASH and RINSE operations.
Following combinations can be selected.
a) Soak + Wash : Select the desired soak time by setting the timer between
15~40 min. Then total wash time will be selected soak time + 15 min. of wash
time.
b) Wash/Rinse : Any Wash/Rinse time 1~15 min. can be selected by setting the
timer between 1~15 min.
Washing will take place for the set period, then machine stops automatically.
Soak Function
a) Soaking is provided for better cleaning of clothes as detergent water
goes to inner pores of clothes resulting dirt removal in better way.
b) Soak time by default will be 25 min. so total time of cycle will be
Soak + Wash time (25 min. + wash time)
c) In soak option, machine operates for 1.5 min. & remains off for 5 min. This
cycle continues for selected soak time.
8
INSTALLATION
Installation area
l
Select flat and firm floor.
l
Incorrect installation may cause severe noise and
break down.
l
The base openings must not be obstructed by
carpeting when the washing machine is installed
on a carpeted floor.
l
Maintain more than 10 cm gap
between the side of drain hose
and the wall.
Drain Hose Installation
l
Drain Hose is installed at
back side of the washing
machine.
l
Don’t remove Drain Hose.
Notes
l
Be sure to re-route the hose so that it is not kinked or has sharp bends which will
prevent proper drainage.
l
The level of the drain should be slightly lower than the lowest part of the washing
machine in order to ensure proper and complete drainage.
l
Use only new hose set provided with the machine.
9
INSTALLATION
Connecting the earth wire
l
Install the earth wire to prevent short-circuit due to leaking current and electric shock.
l
It is attached at the back of the washer. Connect it to the metal water pipe. If the water
pipe is made of plastic, it does not have the earth effect.
l
Never connect the earth wire to the gas
pipe, lightning arrester, telephone
connector etc.
Gas pipe
1
4
7
0
8
2
5
3
6
9
Earth
wire
¬ WARNING : This appliance must be earthed .
Other earthing method
l
After connecting the
earth wire to the earth
copper plate, bury it at
least 75 cm deep under
the wet ground.
l
Connect to the earthingonly outlet.
l
When installing it in an
area where earthing is
not possible, purchase
a short-circuit breaker
(15mA at operation,
7.5mA at idle) and
connect it to the outlet.
Earth
wire
Earth
wire
Earth copper plate
Short-circuit breaker
75cm
Connecting the power plug
l
Insert the power plug into the outlet.
l
Before connecting the power plug, check if the
voltage setting of the machine matches the outlet
voltage.
l
If AC outlet with ground terminal is used,
grounding is not needed. If not, never forget
earthing (earthing method above).
10
Ground terminal
PREPARATION BEFORE WASHING
Preparation
n
n
Inlet hose
n
Connect the
power cord to the
electrical outlet.
Connect the water supply hose
to the water supply inlet.
n
Set the supply selector lever
to “WASH” for washing and
rinsing to “SPIN” for interim
spin rinse.
l
Note : The water Selector
lever should not be placed
near the center (as shown in
Fig.
(A) otherwise water
flows to the wash and spin tub
simultaneously).
(Fig. A)
n
Drain Hose
l
Lay down the drain hose.
Keep the drain hose
flipped down while
washing is in process
Before washing
1 Check
the washing
instruc-tions labels
on the clothing to be
washed.
2 Remove
any objects from the
pockets of the clothing. Object left in
the pockets may damage the
clothing or washing machine
(especially cause clogging of the
drain hose).
3
After separating an oiled or
dyed laundry,
wash.
HOW TO WASH
1 Set the drain selector to 2 Set
“WASH
position.
l
RINSE”
the water
selector to
“WASH”.
WASH
DRAIN SELECTOR
WATER SELECTOR
11
3 Open the water tap and fill water
in the wash tub about halfway to
the desired water level.
HOW TO WASH
4 Put the appropriate amount
5 Select
the wash selector to
"GENTLE",
"NORMAL"
"STRONG" according to kinds
and quantity of the laundry.
of detergent and the laundry
into the wash tub. And add
water to the desired water
level.
(Not available in
WP-9030/9031/9220/90050)
WASH SELECTOR
l
Refer to TABLES for
REFERENCE on page 15.
6 Set the desired
l
wash time.
Refer to TABLES for
REFERENCE on page 15.
7 When washing is finished, select the
drain selector to “DRAIN” position and
drain the water out.
Off
5
40
10
15
WASH TIMER
(For WP-9033/
WP-951S/1021S
WP-1221S/9526S
WP-9256)
l
8
WASH TIMER
(For WP-9030/9031/9032/
WP-770/1020/1220
WP-9250/9251)
WP-9521/9220/9224
WP-90050/92082
DRAIN SELECTOR
Refer to TABLE for REFERENCE on
page 15 for information on how to
select the appropriate washing time.
Spinning in the spin dryer basket :
Put the laundry into the spin dryer
basket.
l Put the laundry down lightly.
l Place the safety cover horizontally
on the laundry.
l Set the desired spin time with the
spin timer.
l
12
HOW TO RINSE
Interim spin rinse
n
Interim spin rinse prior to regular rinsing will remove sudsy water from the laundry and
improve rinsing efficiency.
1 After washing
l
l
Put the laundry into
the spin dryer basket.
Place the safety
cover hori-zontally
on the laundry.
2 Set the water selector to 3 Allow
the water to flow
appropriately.
“SPIN”.
4 Turn off the water supply,
close the safety cover-2
and spin dryer cover.
SPIN
WATER SELECTOR
5 Set the desired spin
6 After spinning
time with the spin
timer.
l
Put the laundry into
the wash tub and
rinse.
Economical water supply rinse
n
This course allows you to save water as this course is to rinse after feeding appropriate
water to the tub.
1 Set
the drain selector to
“WASH l RINSE”
position and feed
appropriate water to the
tub.
2 Set the rinse time with the 3 Put
wash timer.
Off
5
the laundry into the
spin dryer basket and set
the spin time with the spin
timer.
40
10
15
WASH
Water Selector Drain Selector
WASH TIMER
(For WP-9033/
WP-951S/1021S
WP-1221S/9526S
WP-9256)
WASH TIMER
(For WP-9030/9031/9032/
WP-770/1020/1220
WP-9250/9251)
WP-9521/9220/9224
WP-90050/92082
4 Put the laundry into the wash tub and repeat 1 to 3 course
13
Spin Timer
HOW TO RINSE
Continuous water supply rinse
n
The course is to rinse while feeding water continuously
1 Set the drain selector to 2 Put
“WASH
position.
l
RINSE”
the laundry into the
wash tub and open the
water faucet.
3 Set the rinse time with the
wash timer and feed
water continuously.
Off
5
40
10
15
WASH
WASH TIMER
(For WP-9033/
WP-951S/1021S
WP-1221S/9526S
WP-9256)
Water Selector Drain Selector
WASH TIMER
(For WP-9030/9031/9032/
WP-770/1020/1220
WP-9250/9251)
WP-9521/9220/9224
WP-90050/92082
HOW TO SPIN
1. Put the laundry evenly into the spin dryer basket.
Safety cover
2. Put the laundry down lightly.
3. Place the safety cover horizontally on the top of
the laundry.
4. Close the spin dryer cover.
5. Set the spin timer according to the following table.
SPIN TIME GUIDE
Type of clothing
Spin Time
Thin fabrics (synthetic fabrics, mixed fabrics)
1 minute
Sweaters (synthetic fabrics)
1~3 minutes
Cotton underwear
3~5 minutes
Sheets, towels
5 minutes
l
If the spin dryer basket is off-balance and vibrates excessively, stop the spinning,
rearrange the clothes evenly, and then resume spinning.
l
If the spinning fail to stop when the spin dryer cover is opened, the brake is out of
order. Immediately stop using the machine and request repair service.
CAUTION : For woollen clothes, spin for 1 min. only for clothes protection.
AFTER FINISHING
1. Remove the laundry from the spin dryer basket and close
the spin dryer cover
2. If there is water in the wash tub, set the drain selector to
“DRAIN” in order to drain it out.
3. Disconnect the power cord from the electrical outlet.
4. Clean the washing machine. (Refer to CARE AND
MAINTENANCE on page 16~17).
14
REFERENCE
TABLE 1. WEIGHT GUIDE FOR CLOTHES
Type of Clothing
Type of Fabric
Under shirt
Cotton
Weight Per Piece
150 g
Handkerchief
Cotton
50 g
Bath towel
Cotton
300 g
Shirt
Mixed fabric
200 g
Socks (1 pair)
Mixed fabric
50 g
Pajama (shirt and pants)
Cotton
500 g
Winter undershirt
Woollen
600 g
Workclothes
Mixed fabric
800 g
Blouse
Mixed fabric
200 g
TABLE 2. GUIDE FOR WASHING **(A=WP-9030/9031/9220/90050)
Wash
Time
Type of Fabric
Water
Level
Synthetics, Silk, Woolen, Knits
2~5 min.
Cotton, Linen
5~10 min.
Very soiled cotton and linen
10~15 min.
Amount
of Water (Ltr.)
B**
47
54
62
47
54
62
47
54
62
Amount of
Detergent(gms)
B**
TABLE 3. GUIDE FOR WASHING (WITHOUT SOAK) **(A=WP-9032/770/9521/9224/9250/9251/92082 C=WP-1020/1220)
Type of Fabric
Wash
Selector
Wash
Time
~5 min.
Woollen, Knits
Gentle
Synthetics, Silk
GENTLE
8~12 min.
Cotton, Linen
NORMAL
12~15 min.
Very soiled cotton and linen
STRONG
12~15 min.
Water
Level
H
L
M
H
L
M
H
L
M
H
Amount of Water (Ltr)
A**
50
40
45
50
40
45
50
40
45
50
B**
62
47
54
62
47
54
62
47
54
62
C**
66
51
58
66
51
58
66
51
58
66
Amount of Detergent (gms)
A**
60~66
45~51
54~58
60~66
45~51
54~58
60~68
45~51
54~58
60~66
B**
56~66
45~49
51~55
56~66
45~49
51~55
56~66
45~49
51~55
56~66
C**
60~72
45~51
54~58
60~72
45~51
54~58
60~72
45~51
54~58
60~72
TABLE 4. GUIDE FOR WASHING (WITH SOAK) ** (A=WP-9033/9526S/9256 C=WP-951S/1021S/1221S)
Type of Fabric
Wash
Selector
Wash
Time
Soiled
Soak-Gentle
15+15 min.
Synthetics, Silk
Soiled
Cotton, Linen
Soak-Normal
20+15 min.
Worst Condition
Soak-Strong
Very soiled cotton and linen
25+15 min.
Water
Level
Amount of Water (Ltr)
Amount of Detergent (gms)
A**
B**
C**
A**
B**
C**
L
40
47
51
45~51
45~51
45~51
M
45
54
58
54~58
54~58
54~58
H
50
62
66
60~66
60~66
60~72
L
40
47
51
45~51
45~51
45~51
M
45
54
58
54~58
54~58
54~58
H
50
62
66
60~66
60~66
60~72
L
40
47
51
45~51
45~51
45~51
M
45
54
58
54~58
54~58
54~58
H
50
62
66
60~66
60~66
60~72
Notes :
l
l
Amount of laundry is a weight of dry laundry.
Detergent is a general synthetic detergent.
CAUTION : Fill in wash to height 20mm above the level you desire. When washing will
start water level will automatically come to level you desire.
15
CARE AND MAINTENANCE
l
Be sure to disconnect the power cord from the electric outlet before starting care and
maintenance.
Washing machine
n
l
If the washing machine itself becomes dirty
The washing machine can be cleaned with a mild liquid detergent. Never use abrasive
cleaner or chemicals such as benzene or thinner to clean the washing machine,
because these materials will damage both the painted surfaces and the plastic parts.
Pulsator
n If a button or some other object gets caught in the pulsator.
1. Take out the pulsator cap with “-” type driver. (Fig. a)
2. Use a screwdriver to loosen the screw in the center of the
pulsator and lift the pulsator straight up in order to remove the
button or other object. (Fig.b)
Fig. a
3. Replace the pulsator and tighten the screw.
4. Replace the pulsator cap.
Fig. b
Overflow filter & Rotation filter-C
1
2
3
Lift up the area A of the overflow filter.
Take out the rotation filter-C by
pulling in direction shown.
4
Use a brush or your hand to remove all
of the lints which has adhered to the
overflow filter.
Pull the overflow filter forward from
the wash tub in the direction of the
arrow.
5
Turn the net over and rinse in water.
6
Insert the overflow filter back into the
wash tub.
Insert the rotation filter-C back
into the overflow filter.
If only rotation filter-C need washing, proceed the process 1 > 3 > 6 on the upper figure.
16
CARE AND MAINTENANCE
Spin dryer basket
n
If clothing becomes trapped between the spin dryer basket and the spin tub.
1. Unscrew the screw at the left corner in the safety cover-1.
2. Take hold of the front of the safety cover-1
3. Pull the tub by the other hand.
4. Pull the safety cover-1 upward.
5. Remove the article of clothing.
6. Close the safety cover-1, pressing down on it so that it fits securely into the spin tub.
7. Tighten the screw at the left corner in the safety cover-1.
Safety cover -1
Tub
TROUBLESHOOTING GUIDE
Before requesting service
Troubles
Motor does not operate
Checking points
• Is the power cord firmly plugged in ?
• Is a household fuse blown ?
• Is the timer turned to a suitable point except "OFF"?
• Is the wash selector set to a suitable position except "OFF" ? (wash motor)
• Is the "START/PAUSE" button pressed ?
Spin dryer basket does not operate
• Is there any cloth dropped between the basket and tub?
• Is the spin dryer cover closed?
Water does not enter washer
• Is the water faucet hooked up?
• Is the water faucet frozen?
No draining
• Is the drain hose laid down?
• Is the drain hose twisted?
• Is the threshold higher?
17
WIRING DIAGRAM
BK
OR
OR/WH
BUZZER
BK
YL
T1
T2
DOOR
S/W
WH
SPIN
TIMER
BK/YL
RD
SPIN
MOTOR
WH(RD)(BR)
WASH
MOTOR
BK(BK/BL)
WH
GN(GN/YL)
For WP-9030/9031/9032/770
WP-9220/9224
WP-1020/1220
WP-9250/9251/9521/92082
RD
SPIN
MOTOR
WH(RD)(BR)
WH
WASH
MOTOR
WH
GN(GN/YL)
SPIN
MOTOR
WH
For WP-9033/951S
WP-1021S/1221S/
WP-9256/9526S
Water Pressure
Dimensions
Weight (net)
For WP-9030/9031/90050
(Without Buzzer)
On Specification Label
High : 50 l
2
Less than 1,00kPa (1kgf/cm )
775 x 467 x 941 mm (W x D x H)
27.0 kg
WP-951S/1020/1021S/1220*/1221S*
Power Source
Water level
Water Pressure
Dimensions
Weight (net)
*Dimensions
*Weight (net)
On Specification Label
High : 66 l
2
Less than 100kPa (1kgf/cm )
810 x 490 x 991 mm (W x D x H)
30.5 kg
810 x 490 x 1001 mm (W x D x H)
31.0 kg
WP-9521/9526S/9250/9251/9256/92082
Power Source
Water level
Water Pressure
Dimensions
Weight (net)
On Specification Label
High : 50 l
2
Less than 100kPa (1kgf/cm )
775 x 467 x 964 mm (W x D x H)
28.0 kg
18
WH
RD
WASH
MOTOR
WH (RD)(BR)
WP-9030/9031/9032/9033/770/9220/9224/90050
Power Source
BK/YL
GN(YL/GN)
SPECIFICATIONS
Water level
YL
GY
YL
BK(BK/BL)BL
WASH
TIMER
SPIN
TIMER
DOOR
S/W
BK
GY
BK/YL
BK(BK/BL)
BK
OR/WH
VL
T.M
OR/WH
WH
SPIN
TIMER
GY
WASH TIMER
BK
T1
T2
BUZZER
WASH TIMER
BK
DOOR
S/W
LG Electronics
Download PDF