LG | 566LE | Owner's Manual | LG 566LE Owner's manual

LG 566LE Owner's manual
This unit has been
engineered and manufactured to ensure your perimproper use may result in potential e shock or
fire hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
sonal
On
safety,
however
Safety
the power cord supplied with the unit. In case you use another
power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in
Use
only
any way, please contact the manufacturer
service provider for a replacement.
or
the nearest authorized
repair
The power supply cord is used as the main disconnection device. Ensure
that the socket-outlet is easily accessible after installation.
the
Operate
power source indicated in the specificathe display. If you are not sure what type
you have in your home, consult with your dealer.
display only
tions of this manual
of power
supply
or
from
listed
a
on
Overloaded AC outlets and extension cords
are
dangerous.
power cords and broken plugs. They may result in
Call your service technician for replacement.
Do not
Open
*There
are
*There
are
*Contact
no
a
shock
So
or
are
frayed
fire hazard.
the enclosure.
user
serviceable components inside.
Dangerous High Voltages inside, even when the power
your dealer if the display is not operating properly.
is OFF.
To Avoid Personal
Injury :
place the display on a sloping shelf unless properly
only a stand recommended by the manufacturer.
*Do not
*Use
To Prevent Fire
or
secured.
Hazards:
*Always turn the display OFF if you leave the room for more than a short
period of time. Never leave the display ON when leaving the house.
*Keep children from dropping or pushing objects into the display's
cabinet openings. Some internal parts carry hazardous voltages.
*Do not add accessories that have not been designed for this display.
*During a lightning storm or when the display is to be left unattended for
an extended period of time, unplug it from the wall outlet.
On Installation
Do not allow
anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.
Do not use this
display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat can
failures which may result in a fire hazard. Therefore, NEVER:
*Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
*Place the display in a built-in enclosure unless proper ventilation is provided.
cause
*Cover the
*Place the
openings with cloth or other material.
display near or over a radiator or heat source.
Do not rub
mar,
or
or strike the Active Matrix LCD with anything hard as this may scratch,
damage the Active Matrix LCD permanently.
Do not press the LCD
some
screen
with your
finger for
a
long
time
as
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the
no
impact or effect on the display performance.
screen.
If possible,
image quality for
However,
this will have
use
the recommended resolution to obtain the best
your LCD display. If used under any mode except the recommended resolution,
some scaled or
processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD
On
panel.
Cleaning
*Unplug the display before cleaning the face of the display screen.
*Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because
over-spraying may cause electrical shock.
On
Repacking
*Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
Connecting
*Before
setting
the
up the
Display
monitor,
ensure
that the power to the
monitor,
computer system, and other attached devices is turned off.
Unfolding
1.
2.
Lay
Grip
the stand base
monitor face-down
stand
firmly
on a cloth or other soft surface.
then rotate it into full upright position.
Important
*This illustration
depicts
the
general
model of connection. Your
monitor may differ from the items shown in the
picture.
*To Remove the Stand Base
-
Do not force to
on
remove
the Stand
the back first for your
Base, but
*Do not carry the
only
and
remove
safety.
product upside down holding
product may fall
or
get damaged
injure your foot.
the stand base. The
Stand Base
3
the
screws
the
the
Connecting
the
Using
Computer
1. Connect the
secure
Display
signal
cable. When attached,
tighten
the thumbscrews to
the connection.
2. Connect the power cord into a proper power outlet that is
accessible and close to the display.
easily
NOTE
*This is
*This
a
rear
simplified representation of the rear view.
view represents a general model; your display
may differ from the view
as
shown.
Power Card
Wall-outlet
Signal
Cable
type*
PC-outlet
type*
PC
MAC
Mac
adapter
Apple Macintosh use, a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector
on the
supplied cable to a 15 pin 2 row connector.
For
4
Control Panel Functions
Front Panel Controls
Control
Function
Power Button
Use this button to turn the
Power (DPMS)
Indicator
This Indicator
Button
lights
display
up green when the
Use this button to enter
display
a
selection in the On Screen
Display.
the On Screen
or
adjust
items in
Display.
Use this button to enter
Button
off.
operates normally. If the display is in DPM (Energy
Saving) mode, this indicator color changes to amber.
Use these buttons to choose
Button
on or
or
exit the On Screen
Display.
Direct Access Function
Control
Bring
up Contrast and
Brightness adjustment.
Adjusting
When
button
adjusting your display settings, always press the
entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current
screen resolution size
(display mode).
The best display mode is 1024x768.
before
5
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of the
display is quick and easy with the On Screen Display Control system. A short
example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make
using the OSD.
NOTE
*Allow the
display
adjustments.
To make
adjustments in the On
111 Press the
22 To
to stabilize for at least 30 minutes before
Button, then the main
access a
becomes
33 Use the
control,
use
highlighted,
the
press the
Buttons to
adjust
44 Exit the OSD by Pressing the
4
Screen
or
Display,
menu
making image
follow these steps:
of the OSD appears.
Buttons. When the icon you want
Button.
the item to the desired level.
Button.
6
On Screen
Display (OSD) Control Adjustment
following table indicates all the On Screen Display control, adjustment, and
setting menus.
The
Main
Auto
menu
Reference
menu
To
automatically adjust your display
image to the ideal setting.
Adjust
Contrast/
To
Contrast
Brightness
Color
Sub
Adjust
adjust
ness
the contrast and
of the
bright-
screen.
Brightness
To customize the color of the
9300K
screen.
6500K
User Color
(R/G/B)
To
Information
the data about Horizon-
display
tal/ Vertical
frequency, Pixel clock,
Resolution, Model number and Serial
No. of the monitor.
Image Adjust
H./V. POSITION
To
H. Size
To
Menu
Language
the
of the
position
the
improve
clarity
stability of the screen.
Fine Tune
Setup
adjust
Select
To customize the
for
OSD Position
a
user's
screen
operating
screen.
and
status
environment.
OSD Timeout
To reminder the end
Resolution Notice
the
Memory
image
user
change
to the best resolution.
Restore the default
Recall
setting
:
of the
factory
display.
Adjustable
NOTE
The order of icons may differ depending on the model (Page
This function is available for designated models only.
*
7
7~10).
You
were
introduced to the
procedure of selecting and adjusting an item using the
OSD system. Listed below are the icons, icon names, and icon descriptions of the
all items shown on the Menu.
To
adjust
the
display image
to the idea
setting
Auto
Adjust
automatically adjust your display
image to the ideal setting.
Adjusting
To
adjust
the
brightness and
To
contrast of the screen
Brightness
adjust the brightness
To
of the
screen.
Contrast
To
To Customize the color of the
adjust
the contrast of the
screen.
screen
Color
Adjust
Select the
screen
*
9300K:
*
6500K:
*
User Color
color.
Slightly
Slightly
bluish white.
reddish white.
Red
Green
Set your
own
color levels.
Blue
To show you the message about the
display
Information
To show the data about H./ V. Frequency, Pixel
Clock, Resolution, Model
Number and Serial No of the monitor.
To
adjust
the
position
of the
screen
Vertical
To
move
image
up and down.
To
move
image
left and
Position
Horizontal
right.
Position
To
improve
the
clarity
and
stability
H. Size
of the
screen
To minimize any vertical bars
or
stripes visible on the screen
background.The horizontal screen
size will also change.
Fine Tune
To
adjust
the focus of the
display.
This item allows you to remove
any horizontal noise and clear or
sharpen
To customize the
screen
status for
a
user's
the
image
operating
Language
To choose the
Select
the control
OSD
To
Position
window
OSD
To
Timeout
OSD
of characters.
environment
language in which
are displayed.
names
adjust position
on
adjust
the
the
menu.
of the OSD
screen.
display
time of
To reminder the end
user
To restore the default
change
the
image
to the best resolution
Resolution
To show the
Notice
of best resolution.
setting
of the
message
display
Memory
Memory Recall
remindering
Recall
To restore the default
ting of the display
adjusted by manual.
factory
set-
after you have
Troubleshooting
Check the
No
*
following
before
Is the power indicator
light on?
*
Check and
properly
*
Adjust
*
Is the power indicator
amber?
*
If the
the
message
on
or
up the
pressing
saving mode, try moving
key on the keyboard to
any
screen.
*
This message appears when the signal cable
between your PC and your display is not
signal from
(video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
connected. Check the
the screen?
Have you installed the
driver?
display
is in power
display
This message appears when the
Have you installed the
*
and the contrast.
brightness
*
on
Do you see a "CHECK
SIGNAL CABLE"
the
mouse
bring
RANGE" message
the screen?
if the power cord is connected
Press the Power button.
Is the power on and the
power indicator green?
*Doyouseean"OUTOF
see
to the power outlet.
*
*
*
for service.
image appears
Is the power cord of the
display connected?
*
calling
*
signal
cable and try
the PC
again.
display driver?
Be
sure
to
driver CD
Or, you
site:
install the
display
(or diskette) that
can
with your
also download the driver from
http://www.lge.com.
11
driver from the
comes
display
display.
our
web
Display image
*
Display
is incorrect
*
Position is
incorrect.
*
On the
*
screen
background,
bars or stripes
are
Any horizontal noise
appearing in any image
or
characters
are
clearly portrayed.
not
Press the
*
to
the ideal
button to
automatically adjust your
setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the H. SIZE icon in
the on screen display.
display image
visible.
button to
automatically adjust your
setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
display image
vertical
*
Press the
Press the
to
the ideal
button to
automatically adjust your
setting.
If the results are unsatisfactory, decrease the
horizontal bars using the Fine Tune icon in the
on screen display.
display image
to
the ideal
Specifications
Display
15 inches
(38.1cm)
Anti-Glare
coating
Flat Panel Active matrix-TFT LCD
15 inches viewable
0.3
Sync Input
mm
Vertical
Input
Video
Input
30
Freq.
Form
63kHz
-
50
Freq.
75Hz
-
(Automatic)
(Automatic)
Separate TTL, Positive/Negative
15
Signal Input
Input
Resolution
pixel pitch
Horizontal
Form
Max
D-Sub Connector
pin
RGB
Analog (0.7Vp-p/75ohm)
VESA 1024
Recommend
x
VESA 1024
Power
Normal
Consumption
Stand-by/Suspend
3W
Power Off
3W
:
768@75Hz
30W
Width
35.60
cm
/ 14.02 inches
&Weight
Height
35.10
cm
/ 13.82 inches
(with tilt stand)
Depth
18.20
cm
/ 7.17 inches
Net
4.2
Tilt
-3°~20°
Dimensions
Tilt
Range
Power
Input
Environmental
Conditions
Signal
cable
kg (9.24 lbs)
AC 100-240V 50/60Hz 0.8A
Operating
Conditions
Temperature
0
Humidity
10 % to 80 %
Storage
Tilt Stand
768@60Hz
x
to 40
non-Condensing
Conditions
60
Temperature
-20
Humidity
5 % to 95 %
to
Attached(
O
),
Detached
(
X
)
Attached(
O
),
Detached
(
X
)
non-Condensing
Power cord
Wall-outlet type
Regulations
TCO99, UL, cUL, Nemko, CE, TUV/GS, FCC, EPA,
or
GOST, MIC
13
PC-outlet type
Preset Modes
(Resolution)
1
VGA
720
x
400
31.468
70
2
VGA
640
x
480
31.469
60
3
MAC
640
x
480
35.000
66.67
4
VESA
640
x
480
37.500
75
5
VESA
800
x
600
35.156
56.25
6
VESA
800
x
600
37.879
60
7
VESA
800
x
600
48.077
72
8
VESA
800
x
600
46.875
75
9
MAC
832
x
624
49.725
75
*10
VESA
1024
x
768
48.363
60
11
VESA
1024
x
768
56.476
70
12
VESA
1024
x
768
60.023
75
*Recommended
Unlike CRT monitors, which
require a high refresh rate to minimize flickering,
technology is inherently flicker-free. If possible, configure your computer
1024 x 768 addressability at 60Hz vertical refresh rate.
TFT
for
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Kensington Security Slot- optional
a
locking cable that can be
purchased separately at most computer
Connected to
stores
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising