LG | 42LS55A-5D | LG 55LS55A Owner’s Manual

OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating the your set and retain it
for future reference.
MONITOR SIGNAGE MODELS
42LS55A 32LS53A
47LS55A 42LS53A
55LS55A 47LS53A
55LS53A
65LS53A
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
3
LICENSES
4
ASSEMBLY AND
PREPARATION
4
5
7
8
9
10
10
11
Accessories
Optional Accessories
Parts and Buttons
Connecting the Stand
Connecting the Speakers
Connecting IR & Light Sensor
Portrait Layout
Installing on a Wall
13
REMOTE CONTROL
15
MAKING CONNECTIONS
15
17
18
Connecting to a PC
External Device Connection
Using the Input List
18
ENTERTAINMENT
18
18
20
23
25
25
26
27
27
27
28
Using My Media
- Connecting USB storage devices
- Files Supported by My Media
- Viewing Videos
- Viewing Photos
- Listening to Music
- Settings
SuperSign Contents
Information
File Manager
Picture ID Settings
29
USER SETTINGS
29
29
30
34
35
37
Main Menu Settings
- Quick Settings
- Picture Setting
- Sound Settings
- Network Settings
- General Settings
38
TROUBLESHOOTING
40
PRODUCT SPECIFICATIONS
56
IR CODES
58
TO CONTROL MULTIPLE
PRODUCTS
58
58
58
59
61
Connecting the cable
RS-232C Configurations
Communication Parameter
Command Reference List
Transmission/Reception Protocol
LICENSES
3
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
has passed rigorous testing to verify that it plays DivX video. Visit divx.com for
more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium
content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from
DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are
registered trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc. ©
DTS, Inc. All Rights Reserved.
NOTE
••The warranty will not cover any damage caused by using the product in an excessively dusty
environment.
ENGLISH
LICENSES
4
ASSEMBLY AND PREPARATION
ENGLISH
ASSEMBLY AND PREPARATION
Accessories
Please check whether all the components are included in the box before using the product. If there are any
missing components, contact the retail store where you purchased the product. The illustrations in this manual
may differ from the actual product and accessories.
Remote Control,
Batteries (AAA) 2EA
CD (Owner’s Manual)/
Card
Power Cord
IR & Light Sensor
HDMI Cable
CAUTION
••Always use genuine components to ensure safety and product performance.
••The product warranty will not cover damage or injury caused by the use of counterfeit components.
NOTE
••The accessories supplied with your product may vary depending on the model.
••Product specifications or contents in this manual may be changed without prior notice due to
upgrade of product functions.
••SuperSign Software & Manual
- Downloading from the LG Electronics website.
- Visit the LG Electronics website (www.lgecommercial.com/supersign) and download the latest
software for your model.
ASSEMBLY AND PREPARATION
5
Without prior notice, optional accessories are subject to change to improve the performance of the
product, and new accessories may be added. The illustrations in this manual may differ from the actual
product and accessories.
Stand
Screws
ST-321T 32LS53A
ST-421T 42LS53A/ 42LS55A
47LS55A
ST-471T 47LS53A/
55LS53A/ 55LS55A
ST-651T 65LS53A
Diameter 4.0 mm x Pitch 0.7 mm x
Length 14 mm (including spring washer)
Stand kit
Speakers
SP-2100
Cable Holders/
Cable Ties
Screws
Diameter 4.0 mm x Pitch
0.7 mm x Length 8 mm
(including spring washer)
Screws
Diameter 4.0 mm x Pitch
1.6 mm x Length 10 mm
Speaker kit
NOTE
••Cable holder/Cable tie may not be available in some areas or for some models.
••Optional accessories are available for some models. If necessary, please purchase them separately.
ENGLISH
Optional Accessories
6
ASSEMBLY AND PREPARATION
ENGLISH
Media Player
MP500/MP700
Screws
Owner’s Manual
(supplied on CD-ROM) /
Card
Media Player kit
KT-SP0
Pixel sensor kit
NOTE
•• Optional accessories are available for some models. If necessary, please purchase them separately.
•• Pixel sensor is sold separately. You can obtain additional accessories from your local retail store.
ASSEMBLY AND PREPARATION
ENGLISH
Parts and Buttons
1
2
3
4
PIXEL
SENSOR
___
3.3V --- 0.25mA
5
IR&LIGHT
SENSOR
6
Connection
Panel
Screen
Buttons
No.
7
Description
1
Adjusts up and down.
2
Moves left and right.
3
Displays the current signal and mode.
4
Accesses the main menus, or saves your input and exits the menus.
5
Change the input signal.
6
Turns the power on or off.
8
ASSEMBLY AND PREPARATION
ENGLISH
Connecting the Stand
- For certain models only.
1. Place a soft cloth on the table and place the
product with the screen facing downward.
2. Use the screws to secure the stand to the
back of the product as shown below.
ASSEMBLY AND PREPARATION
- For certain models only.
42LS55A
42LS53A
65LS53A
47LS55A
47LS53A
55LS55A
55LS53A
32LS53A
1. Connect an input signal cable before
installing the speakers.
2. Mount the speakers by using screws as
shown below. Make sure the power cable is
disconnected before making a connection.
3. Connect the speaker cables noting the
1. Connect an input signal cable before
installing the speakers.
2. Mount the speakers by using screws as
shown below. Make sure the power cable is
disconnected before making a connection.
3. Connect the speaker cables noting the
correct polarity. Use cable holders and cable
correct polarity. Use cable holders and cable
ties to organize the speaker cables.
ties to organize the speaker cables.
ENGLISH
Connecting the Speakers
9
10
ASSEMBLY AND PREPARATION
ENGLISH
Connecting IR & Light Sensor
When you connect the cable to the product,
the feature for receiving remote control signals
is activated. The IR & light sensor is magnetic.
Attach it to the front edge of the product for use.
[Front]
Using Kensington Lock
The Kensington security system connector is
located at the back of the monitor. For more
information on installation and use of this
system, refer to the manual provided with the
Kensington security system or visit http://www.
kensington.com.
Connect the Kensington security system cable
between the monitor and a table.
PIXEL
SENSOR
___
3.3V --- 0.25mA
CAUTION
IR&LIGHT
SENSOR
CAUTION
Portrait Layout
When installing in a portrait layout, rotate the
monitor counterclockwise 90 degrees (when
facing the screen).
NOTE
••The Kensington security system is optional.
You can obtain additional accessories from
most electronics retail stores.
ASSEMBLY AND PREPARATION
CAUTION
For proper ventilation, allow a clearance of 10
cm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting
Bracket Installation and Setup Guide.
10cm
10cm
10cm
10cm
10cm
••Disconnect the power cord before moving or
installing the monitor to avoid risk of electric
shock.
••If you install the monitor on a ceiling
or slanted wall, it may fall and result in
injury. Use an authorized LG wall mount
and contact your local dealer or qualified
personnel to assist with the installation.
••Do not over tighten the screws as this may
damage the monitor and void your warranty.
••Use only screws and wall mounting brackets
that meet the VESA standard. Any damage
or injuries caused by misuse or use of
improper accessories are not covered by the
warranty.
••To prevent injury, this apparatus must be
securely attached to the wall in accordance
with the instrallation instructions. (This only
pertains to Australia and New Zealand.)
To install your monitor on a wall, attach a wall
mounting bracket (optional part) to the back of
the monitor.
Make sure that the wall mounting bracket is
securely fixed to the monitor and to the wall.
NOTE
1. Use only screws and wall mounting brackets
that conform to VESA standards.
2. Screws which are longer than standard
length may damage the inside of the
monitor.
3. A non-VESA standard screw may damage
the product and cause the monitor to fall.
LG Electronics is not liable for any accidents
related to the use of non-standard screws.
4. Please use VESA standard as below.
••785 mm and above
* Fixing screws: D
iameter 6.0 mm x Pitch
1.0 mm x Length 12 mm
785 mm
••The wall mount kit includes the installation
guide and all necessary parts.
••The wall mounting bracket is optional. You
can obtain additional accessories from your
local dealer.
••The length of screws required may differ
depending on the wall mount. Be sure to
use the correct length.
••For more information, please refer to the
guide provided with the wall mount.
ENGLISH
Installing on a Wall
11
12
ASSEMBLY AND PREPARATION
ENGLISH
Securing the monitor to a wall (optional)
Procedure may differ depending on the model.
1. Insert and tighten the eyebolts, or brackets
and bolts on the back of the monitor.
- If there are already bolts inserted in the
eyebolts’ position, remove the other bolts
first.
2. Mount the wall brackets with the bolts to the
wall. Match the location of the wall bracket
and the eyebolts on the rear of the monitor.
3. Connect the eyebolts and wall brackets
tightly with a sturdy cord.
Make sure the securing cord is horizontal
with the flat surface.
CAUTION
••Make sure that children do not climb on or
hang from the monitor.
NOTE
••Use a platform or cabinet that is large
and strong enough to support the monitor
securely.
••Brackets, bolts, and cords are sold
separately. You can obtain additional
accessories from your local retail store.
WARNING
••If the monitor is not positioned in a
sufficiently stable location, there is a
danger that it will fall. Many injuries,
particularly to children, can be avoided by
taking simple precautions such as:
»»Using cabinets or stands
recommended by the manufacturer.
»»Only using furniture that can safely
support the monitor.
»»Ensuring the monitor is not
overhanging the edge of the supporting
furniture.
»»Not placing the monitor on tall furniture
(for example, cupboards or bookcases)
without anchoring both the furniture
and the monitor to a suitable support.
»»Not placing cloth or other materials
between the monitor and supporting
furniture.
»»Educating children about the dangers
of climbing on furniture to reach the
monitor or its controls.
REMOTE CONTROL
13
ENGLISH
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this
manual carefully to use the monitor correctly.
To install batteries, open the battery cover, place batteries (1.5 V AAA) matching
the labels inside the compartment, and close the battery cover.
and
terminals to
To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the
actual accessories.
CAUTION
••Do not mix old and new batteries, as this
may damage the remote control.
••Be sure to point the remote control toward
the remote control sensor on the monitor.
(POWER)
ENERGY SAVING(
Turns the monitor on or off.
)
Adjusts the brightness of
the picture to reduce energy
consumption.
MONITOR ON
Turns the monitor on.
INPUT
MONITOR OFF
Selects the input mode.
Turns the monitor off.
1/a/A Button
3D
Toggles between numerical and
alphabetical.
(Depending on the model, this
feature may not be supported.)
This model does not support
this.
Number and Alphabet
buttons
ARC
Selects the Aspect Ratio
mode.
Enters numerical or
alphabetical characters
depending on the setting.
(Depending on the model, this
feature may not be supported.)
Volume Up/Down
Button
Adjusts the volume.
CLEAR
Deletes the entered numerical
or alphabetical character.
(Depending on the model, this
feature may not be supported.)
PSM
Selects the Picture Mode.
BRIGHTNESS Button
MUTE
Adjusts the brightness of the
display. PAGE Function is not
supported in the this model.
(Depending on the model, this
feature may not be supported.)
Mutes all sounds.
BACK
ID
TILE
EXIT
14
REMOTE CONTROL
ENGLISH
AUTO
HOME
Activates the Launcher.
SETTINGS
Accesses the main menus
or saves your input and exit
menus.
OK
Selects menus or options and
confirms your input.
BACK
Allows you to move back one step
in the user interaction function.
Automatically adjusts picture
position and minimizes
image instability (available
for RGB input only).
(Depending on the model,
this feature may not be
supported.)
W.BAL
This model does not support
this.
S.MENU
SuperSign menu key
(Depending on the model,
this feature may not be
supported.)
Navigation Buttons
Scrolls through menus or
options.
Exit
Allows you to control
various multimedia devices to
enjoy multimedia simply by using
the remote control
through the SimpLink menu.
(Depending on the model, this
feature may not be supported.)
ID ON/OFF
When the Picture ID number
matches the Set ID number, you
can control whichever monitor you
want in multi-display format.
Quit all OSD tasks and
applications.
TILE
This model does not support
this.
USB Menu Control
Buttons
Controls media playback.
MAKING CONNECTIONS
You can connect various external devices to your monitor. Change the input mode and select the
external device you want to connect.
For more information about external device connections, see the user manual provided with each
device.
Connecting to a PC
The illustrations may differ from the actual accessories. Some of the cables are not provided.
This monitor supports the Plug & Play* feature.
* Plug & Play: a feature that enables a PC to recognize devices attached by the user without device
configuration or user intervention when powering up.
(not included)
DP OUT
DVI OUT
(not included)
(not included)
___
3.3V --- 0.25mA
HDMI
(not included)
DVI OUT
(not included)
ENGLISH
MAKING CONNECTIONS
15
16
MAKING CONNECTIONS
ENGLISH
NOTE
••For the best image quality, using the monitor with HDMI connection is recommended.
••To comply with the standard specifications of the product, use a shielded interface cable with a ferrite
core, such as a DVI cable.
••If you turn the monitor on when the set is cold, the screen may flicker. This is normal.
••Sometimes red, green, or blue spots may appear on the screen. This is normal.
••Use a High Speed HDMI™ cable.
••If you cannot hear any sound in HDMI mode please check your PC settings. Some PCs require you
to manually change the default audio output to HDMI.
••If you want to use HDMI-PC mode, you must set your PC/DTV to PC mode.
••You may experience compatibility issues if you use HDMI-PC mode.
••Make sure the power cable is disconnected.
CAUTION
••Connect the signal input cable and tighten it by turning the screws clockwise.
••Do not press the screen with your finger for a prolonged period as this may
result in temporary distortion on the screen.
••Avoid displaying static images on the screen for a long period of time to prevent
image burn. Use a screensaver if possible.
••A wireless communication device near your monitor can affect the image.
NOTE
••If you connect a gaming device to the monitor, use the cable provided with the gaming device.
••It is recommended to use the speakers that are provided as optional accessories.
••Use a High Speed HDMI™ cable.
••High Speed HDMI™ cables transmit a HD signal up to 1080p and higher.
MAKING CONNECTIONS
Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode.
The illustrations may differ from the actual accessories. Some of the cables are not provided. For
the best picture and sound quality, connecting external devices to your monitor using HDMI cables is
recommended.
OR
USB
(not included)
Direct Connection/
Using the Router/
Using the Internet
Network
(not included)
___
3.3V --- 0.25mA
HD Receiver/DVD/VCR
HDMI
Camcorder/Camera/Gaming Device
NOTE
••If you connect a gaming device to the monitor, use the cable provided with the gaming device.
••It is recommended to use the speakers that are provided as optional accessories.
••Use a High Speed HDMI™ cable.
••High Speed HDMI™ cables transmit a HD signal up to 1080p and higher.
ENGLISH
External Device Connection
17
18
ENTERTAINMENT
ENGLISH
Using the Input List
Remote Control (HOME)
Input Mode
HDMI1
HDMI2
DisplayPort
DVI
Description
You can watch content on a PC,
DVD player, Digital set-top box, and
other high definition devices.
ENTERTAINMENT
Using My Media
Connecting USB storage
devices
Connect a USB storage device such as a USB
flash memory or an external hard drive to the
display and use multimedia features.
Connect a USB flash memory or USB memory
card reader to the display as shown in the
following illustration.
OR
CAUTION
••Do not turn off the monitor or remove a
USB storage device when the My Media
screen is activated. This could result in
loss of files or damage to the USB storage
device.
••Back up files you have saved on a USB
storage device frequently, as loss or
damage to the files may be not covered by
the warranty.
ENTERTAINMENT
19
••Only a USB storage device can be recognized.
••A USB device does not work effectively when it is connected via a USB hub.
••A USB storage device using an automatic recognition program may not be recognized.
••A USB storage device using its own driver may not be recognized.
••The recognition speed of a USB storage device may depend on each device.
••Please do not turn off the display or unplug the USB storage device when the connected device is
working. If the USB storage device is suddenly disconnected, the stored files or the device itself may
be damaged.
••Please do not connect a USB storage device which was modified to work on a PC. The device may
cause the monitor to malfunction or the content fail to be played. Use only a USB storage device
which contains normal music, image or video files.
••A USB storage device formatted as a utility program not supported by Windows may not be
recognized.
••A USB storage device (over 0.5 A) which requires an external power supply must be connected to a
power supply separately. If it is not, the device may not be recognized.
••Please connect the USB storage device using the cable provided by the device manufacturer.
••Some USB storage devices may not be supported or operate smoothly.
••File alignment method of USB storage devices is similar to that of Window XP and filenames can
recognize up to 100 English characters.
••Back up important files regularly as data stored on a USB storage device may be damaged. We will
not be responsible for any data loss.
••If the USB HDD does not have an external power source, the USB device may not be detected. To
ensure the device is detected, connect the external power source.
- Please use a power adapter for an external power source. We do not provide a USB cable for an
external power source.
••If your USB storage device has multiple partitions, or if you use a USB multi-card reader, you can use
up to four partitions or USB storage devices.
••If a USB storage device is connected to a USB multi-card reader, its volume data may not be
detected.
••If the USB storage device does not work properly, disconnect and reconnect it.
••Detection speed differs from device to device.
••If the USB storage device is connected in Standby Mode, the specific hard disk will automatically be
loaded when the display is turned on.
••The recommended capacity is 1 TB or less for a USB external hard drive and 32 GB or less for USB
memory stick.
••Any device with more than the recommended capacity may not work properly.
••If a USB external hard drive with an “Energy Saving” function does not work, try turning the hard drive
off and on again.
••USB storage devices below USB 2.0 are also supported but may not function correctly in the Videos.
••A maximum of 999 sub-folders or files can be recognized under one folder.
ENGLISH
Tips for using USB storage devices
20
ENTERTAINMENT
ENGLISH
Files Supported by My Media
Supported External Subtitle Format
••*.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX)
To use Select Play,
Remote Control (HOME)
Photos/ Videos/ Music
••Play Selection: plays back selected content.
To set Device Selection,
Remote Control (HOME)
Photos/ Videos/ Music
••Device Selection: import contents from the selected device.
ENTERTAINMENT
21
••FULL HD Video
1920 X 1080: XSUB (Supports internal subtitles generated from DivX6)
Supported Video Codec
Extension
Codec
.asf
.wmv
Videos
VC-1 Advanced Profile (excluding WMVA), VC-1 Simple and Main Profiles
Audio
WMA Standard (excluding WMA v1/WMA Speech), WMA 9 Professional
.divx
.avi
Videos
DivX3.11, DivX4, DivX5, DivX6, XViD (except 3 warp-point GMC), H.264/AVC,
Motion Jpeg, MPEG-4
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital Plus,
LPCM, ADPCM, DTS
.mp4
.m4v
.mov
Videos
H.264/AVC, MPEG-4
Audio
AAC, MPEG-1 Layer III (MP3)
.3gp
.3g2
Videos
H.264/AVC, MPEG-4
Audio
AAC, AMR-NB, AMR-WB
mkv
Videos
MPEG-2, MPEG-4, H.264/AVC, VP8
Audio
Dolby Digital, PCM, DTS, MPEG-1 Layer I, II, MPEG-1 Layer III (MP3),
Vorbis, AAC
.ts
.trp
.tp
.mts
Videos
H.264/AVC, MPEG-2
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital Plus,
AAC, PCM
.mpg
.mpeg
.dat
Videos
MPEG-1, MPEG-2
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3)
.vob
Videos
MPEG-1, MPEG-2
Audio
Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM
ENGLISH
Supported Internal Subtitle Format
22
ENTERTAINMENT
ENGLISH
Supported Audio File
File Format
MP3
Item
Information
Bit rate
32 Kbps - 320 Kbps
Sample freq.
16 KHz - 48 KHz
Support
MPEG1, MPEG2, Layer2, Layer3
.wav
Support
PCM
.ogg
Support
Vorbis
.wma
Support
WMA
Supported Photo File
File Format
Format
Item
2D (jpeg, jpg,
jpe)
JPEG
yyMinimum : 64 x 64
yyMaximum: Normal Type: 15360 (W) x 8640 (H) / Progressive Type: 1920 (W)
x 1440 (H)
2D (png)
PNG
yyMinimum : 64 x 64
yyMaximum: 1920 (W) x 1080 (H)
2D (bmp)
BMP
yyMinimum : 64 x 64
yyMaximum: 1920 (W) x 1080 (H)
ENTERTAINMENT
23
Play video files on display. All of the saved video files are shown in your display.
To play video files on display,
Remote Control (HOME)
Videos
Tips for Playing Video Files
••Some user-created subtitles may not work properly.
••Some special characters in subtitles are not rendered.
••HTML tags are not supported in subtitles.
••Subtitles in languages other than the supported languages are not available.
••The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the
audio language is changed.
••A damaged video file may not play correctly, or some player functions may not be usable.
••Video files produced with some encoders may not be played correctly.
••If the video and audio structure of a recorded file is not interleaved, either video or audio is outputted.
••Depending on the frame, HD videos with a maximum of 1920 x 1080 @ 25/30 P or 1280 x 720 @
50/60P are supported.
••Depending on the frame, videos with resolutions higher than 1920 x 1080 @ 25/30 P or 1280 x 720
@ 50/60 P may not play correctly.
••Video files other than the specified types and formats may not play correctly.
••Maximum bit rate of playable video file is 20 Mbps. (Motion JPEG: 10 Mbps only)
••We cannot guarantee smooth playback of files encoded level 4.1 or higher in H.264 / AVC.
••Video files more than 30 GB in file size are not supported.
••A DivX video file and its subtitle file must be located in the same folder.
••A video file name and its subtitle file name must be identical for it to be displayed.
••Playing a video via a USB connection that does not support high-speed connection may not function
correctly.
••Files encoded with GMC (Global Motion Compensation) may not be played.
ENGLISH
Viewing Videos
24
ENTERTAINMENT
ENGLISH
NOTE
••Option values changed in Videos do not affect the Photos and Music. and in turn are not affected
by option values changed in Photos or Music.
••Option values changed in Photos and Music do affect each other.
••When restarting a video file after stopping it, you can play from the point at which it was stopped.
NOTE
••Only 10,000 sync blocks can be supported within the subtitle file.
••When playing a video, you can adjust the picture size by pressing the ARC button.
••Korean subtitle is supported only when the OSD menu is in Korean.
••The code page options may be disabled depending on the language of the subtitle files.
••Select the appropriate code page for the subtitle files.
ENTERTAINMENT
25
The displays on the screen may differ from the model.
Viewing image files
Remote Control (HOME)
Photos
Listening to Music
Viewing music files
Remote Control (HOME)
Music
NOTE
••Files with unsupported extensions are not displayed.
••If a file is invalid, a broken image and the message "unrecognizable file" are displayed.
••Damaged music files are displayed as 00:00 and will not be played.
••A music file downloaded from a paid service with copyright protection will not play, and inappropriate
information may be displayed during playback.
••You can use PLAY(
), Pause(
),
,
,
buttons on the remote control also in this mode.
••You can use the
button to select the next track and the
button to select the previous track.
••If you press the
button within 5 seconds after playing the song, you will return to the previous
song; if you press the same button after 5 seconds, you will return to the start of the song.
ENGLISH
Viewing Photos
26
ENTERTAINMENT
ENGLISH
Settings
You must register your product to play a DRM-protected DivX video.
In order to register/deregister purchased or rented DivX ® VOD contents
Remote Control (HOME)
Settings
DivX ® VOD
In order to play purchased or rented DivX® VOD contents, you should register your device with 10 digit
DivX registration code from your device at www.divx.com/vod.
••Registration: view the registration code of your display.
••Deregistration: cancel the registration.
NOTE
•• While you are checking the registration code, some buttons may not work.
•• If you use the DivX registration code of another device, you cannot play rented or purchased DivX
files. Use only the DivX registration code assigned to your product.
•• Video or audio files that are not converted using the standard DivX codec may be corrupted or not
play.
•• The DivX VOD code allows you to activate up to 6 devices under one account.
•• After deregistration, you must register your device again to see DivX® VOD contents.
ENTERTAINMENT
File Manager
Plays stored files using the Export option in
SuperSign Editor.
You can move, copy or delete files.
To play back the stored files using the
Export option
To move, copy, or delete files
Remote Control (HOME)
Remote Control (HOME)
Only contents distributed by SuperSign
Manager are displayed and selectable.
••You can move or copy files or folders from
internal to external memory.
••You can move or copy files or folders from
external to internal memory.
••You can delete files or folders from internal
or external memory.
NOTE
••If there is an AutoPlay folder in the
USB storage device and its files are in
supported formats, they will be played back
automatically when the USB storage device
is connected to the monitor.
Information
To check the basic information of Signage
Remote Control (HOME)
You can see the basic information on Signage.
You can also switch to Smart Energy Saving
Mode or configure Fail Over settings. (You can
only switch to Smart Energy Saving Mode
when Energy Saving Mode is set to Off.)
NOTE
••This app is for managing files and therefore
cannot play media files. To play media files,
launch My Media.
ENGLISH
SuperSign Contents
27
28
ENTERTAINMENT
ENGLISH
Picture ID Settings
Picture ID is used to change the settings of a
specific set (display) using a single IR receiver
for multi-vision. Communication is possible
between a monitor with an IR receiver and
other monitors using RS232C cables. Each
monitor is identified by a Set ID. If you assign
the Picture ID using the remote control, only
displays with matching Picture ID and Set ID
can be controlled remotely.
3. Assign the Set ID to the selection of your
choice.
••A set with a different Set ID from the Picture
ID cannot be controlled by IR signals.
AUDIO
(RGB/DVI)
RS-232C OUT
RS-232C OUT
RS-232C OUT
RS-232C IN
RS-232C IN
RS-232C IN
NOTE
REMOTE
CONTROL IN
1. Assign the Set ID to the installed monitors as
shown below.
IR & Light Sensor
RS232C cables
PICTURE ID ON [2]
2. Press the red ON button on the remote
control to assign the PICTURE ID.
••If Picture ID is set to 2, only the upper right
monitor, which has a Set ID of 2, can be
controlled by IR signals.
••If you press the green OFF button for
PICTURE ID, the Picture IDs for all
monitors are turned off. If you then press
any button on the remote control, all
monitors can be controlled by IR signals
regardless of Set ID.
••With PICTURE ID ON, you can only
increase the picture ID by 1. You cannot
decrease it.
USER SETTINGS
29
ENGLISH
User Settings
Main Menu Settings
Quick Settings
Configures frequently used settings menus.
To turn your monitor on or off automatically
Remote Control (SETTINGS)
Quick
On Timer/Off Timer
You can set the On/Off Timer for your monitor. If you do not want to set the On/Off Timer, select Off in
Repeat.
To set the backlight and contrast automatically
Remote Control (SETTINGS)
Quick
Smart Energy Saving
According to picture brightness, the brightness of the monitor will be adjusted automatically to save
energy.
••Off: disables the Smart Energy Saving function.
••On: enables the Smart Energy Saving function.
30
USER SETTINGS
ENGLISH
Picture Setting
To Select Picture Mode
Remote Control (SETTINGS)
Picture
Picture Mode
Select the picture mode that is best suited to the video type.
••Vivid: adjusts the video image for a retail environment by enhancing the contrast, brightness, and
sharpness.
••Standard: adjusts the video image for a normal environment.
••APS: reduces power consumption by adjusting the brightness of the screen.
••Cinema: optimizes the video image for watching movies.
••Sports: optimizes the video image for watching sports. Even fast actions such as kicking or throwing
a ball are rendered clearly on the screen.
••Game: optimizes the video image for playing videogames.
••Expert 1/Expert 2: allows an expert, or anyone interested in high quality pictures, to manually tune
the picture for the best picture quality. This adjustment menu is provided for
ISF-certified picture quality tuning experts. (The ISF logo can only be used on
ISF-certified monitors.)
NOTE
••Depending on the input signal, the available picture modes may differ.
••Expert is an option that allows a picture quality expert to fine-tune the picture quality using a specific
image. Thus, it may not be effective for a normal picture.
USER SETTINGS
31
Remote Control (SETTINGS)
Picture
Picture Adjust
••Backlight: adjusts the brightness of the screen by controlling the LCD backlight. The closer the value
is to 100, the brighter the screen is.
••Contrast: adjusts the difference between the light and dark areas of the picture. The closer the value
is to 100, the greater the difference is.
••Brightness: adjusts the overall brightness of the screen. The closer the value is to 100, the brighter
the screen is.
••Sharpness: adjusts the sharpness of the edges of objects. The closer the value is 50, the clearer and
the sharper the edge becomes.
••H Sharpness: adjusts the sharpness of the contrast edges on the screen from a horizontal point of
view.
••V Sharpness: adjusts the sharpness of the contrast edges on the screen from a vertical point of view.
••Color: softens or deepens the tints on the screen. The closer the value is 100, the deeper the colors
become.
••Tint: adjusts the balance between red and green levels displayed on the screen. The closer the value
is to Red 50, the deeper the color red becomes, and the closer the value is to Green 50, the
deeper the color green becomes.
••Color Temperature: adjusts the tints of the screen to evoke feelings of warmth or coolness.
••Advanced Control/Expert Control: customizes the advanced options.
Dynamic
Contrast
Optimizes the difference between the light and dark parts of the screen according to the
brightness of the image.
Super
Resolution
Sharpens the blurry or indistinguishable parts of the picture.
Color Gamut
Selects the range of colors to display.
Dynamic Color
Adjusts the tint and saturation of the image for a more vivid and lively display.
Edge Enhancer
Provides much sharper and clearer edges to the picture.
Color Filter
Accurately adjusts color and tint by filtering a specific color area of RGB space.
Preferred Color
Adjusts the skin tint, grass tint, and sky tint to your preference.
Gamma
Adjusts the medium brightness of the image.
White Balance
Adjusts the overall tint of the picture to your preference.
In Expert mode, you can fine-tune the picture using the Method/Pattern options.
Color
Management
System
Experts use the color management system when they adjust the colors by using the test
pattern. The color management system allows you to make an adjustment by selecting from
among 6 different color spaces (Red/Yellow/Blue/Cyan/Magenta/Green) without affecting
other colors.
You may not see tints change in a normal picture even after adjustment.
ENGLISH
To fine-tune the picture mode
32
USER SETTINGS
ENGLISH
••Picture Options: customizes the picture options.
Noise
Reduction
Removes irregularly generated tiny dots for a clear picture.
MPEG Noise
Reduction
Reduces the noise produced while creating digital video signals.
Black Level
Adjusts the black level of the picture to correct the brightness and contrast of the picture.
Real Cinema
Optimizes the video image for a cinematic look.
TruMotion
Displays fast-moving pictures with optimal picture quality.
-Off: Turns off the TruMotion.
-Smooth: displays fast-moving pictures smoothly.
-Clear: displays fast-moving pictures clearly.
-User: set de-judder manually.
*De-judder: adjusts judder on the screen.
NOTE
••You can adjust advanced settings only in the User mode.
••Reset: resets the picture settings.
To set the aspect ratio,
Remote Control (SETTINGS)
Picture
Aspect Ratio
Changes the aspect ratio to view the image in its optimal size.
••16:9: displays the image with a 16:9 aspect ratio.
••Just Scan: displays the image in the original size without cutting off the edges.
Original is available in HDMI (720p or higher) mode.
••Set By Program: automatically changes the aspect ratio to 4:3 or 16:9 depending on the input video
signal.
••4:3: displays the image with a 4:3 aspect ratio.
••Zoom: expands the image to fit to the width of the screen. The top and bottom of the image may be
cropped.
••Cinema Zoom: enlarges the image to have a cinemascope ratio of 2.35:1 without distortion.
USER SETTINGS
33
••If a fixed image is displayed on the screen for a long period of time, it will be imprinted and become
a permanent disfigurement on the screen. This image burn or burn-in is not covered by the warranty.
••If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed
area of the screen.
••The options may differ depending on the model.
••Depending on the input signal, the available aspect ratio may differ.
••You can select only 4:3 and 16:9 aspect ratios in HHDMI1-PC/ HDMI2-PC/ DisplayPort-PC/ DVI-PC
input mode.
To use the Energy Saving function
Remote Control (SETTINGS)
Picture
Energy Saving
Reduces power consumption by adjusting the brightness of the screen.
••Auto: adjusts the brightness of the monitor according to ambient light. (This feature is available only
with certain models.)
••Off: disables the Energy Saving mode.
••Minimum/Medium/Maximum: uses the Energy Saving according to the Energy Saving level
specified for your monitor.
••Screen Off: turns off the screen. You will only hear audio. You can turn on the screen again by
pressing any button on the remote control except the power button.
To use the Smart Energy Saving function
Remote Control (SETTINGS)
Picture
Smart Energy Saving
According to picture brightness, the brightness of the monitor will be adjusted automatically to save
energy.
••Off: disables the Smart Energy Saving function.
••On: enables the Smart Energy Saving function.
To run a Picture Test
Remote Control (SETTINGS)
Picture
Picture Test
Run a Picture Test to check that picture signals are outputted normally, then solve any problems by
selecting the relevant option on the screen. If there are no problems with the Test Picture, check
connected external devices.
ENGLISH
CAUTION
34
USER SETTINGS
ENGLISH
Sound Settings
To select a Sound Mode
Remote Control (SETTINGS)
Sound
Sound Mode
The best sound quality will be selected automatically depending on the video type currently being
watched.
••Standard: this sound mode works well for content of all types.
••News: optimizes sound for watching news.
••Music: optimizes sound for listening to music.
••Cinema: optimizes sound for watching movies.
••Sports: optimizes sound for watching sports.
••Game: optimizes sound for playing videogames.
To use the Sound Effects function
Remote Control (SETTINGS)
Sound
Sound Effects
••Clear Voice ll: enjoy clearer sound with the three-level adjustment.
••Equalizer: manually adjust sound by using the equalizer. .
••Balance: adjust the output volume for the left speaker and the right speaker.
••Reset: reset the sound settings.
To select a Volume Increase Rate,
Remote Control (SETTINGS)
Sound
Volume Increase Rate
you can set the volume range by selecting any of Low/ Medium/ High.
To sync audio with video
Remote Control (SETTINGS)
Sound
AV Sync. Adjust
••Speaker: adjusts the sync between video and audio coming from external speakers, such as those
connected to the digital audio output port, LG audio equipment, or headphones. From the
default value, the closer the value is to -, the faster the sound output becomes, and the
closer the value is to +, the slower the sound output becomes.
••Bypass: audio coming from external devices without delay. Audio may be outputted earlier than video
due to the processing time for video that is inputted into the monitor.
USER SETTINGS
35
Remote Control (SETTINGS)
Sound
Sound Test
Run a sound test to check that sound signals are outputted normally, then solve any problems by
selecting the relevant option on the screen. If there are no problems with the Sound Test, check
connected external devices.
Network Settings
To Set a Signage Name
Remote Control (SETTINGS)
Network
Signage Name
You can set a name for Signage Monitor that will be used on the network by using the on-screen
keyboard.
To Set Your Network
Remote Control (SETTINGS)
Network
Wired Connection (Ethernet)
••Connecting to a wired network: connect the display to a Local Area Network (LAN) via the LAN
port as shown in the following illustration and set up the network
settings. Only wired network connections are supported. After
making a physical connection, a small number of networks may
require the display network settings to be adjusted. For most
networks, the display will automatically make a connection without
any adjustments. For detailed information, contact your Internet
provider or consult your router manual.
ENGLISH
To Run a sound test
36
USER SETTINGS
ENGLISH
Tips for Network Setting
Use a standard LAN cable (Cat5 or higher with a RJ45 connector) with this display.
Many network connection problems during set-up can often be fixed by re-setting the router or modem.
After connecting the display to the home network, quickly power off and/or disconnect the power cable
of the home network router or cable modem, then power on and/or connect the power cable again.
Depending on the Internet Service Provider (ISP), the number of devices that can receive Internet
service may be limited by the applicable terms of service. For details, contact your ISP.
LG is not responsible for any malfunction of the display and/or the Internet connection feature due
to communication errors/malfunctions associated with your Internet connection, or other connected
equipment.
LG is not responsible for problems with your Internet connection.
You may experience undesired results if the network connection speed does not meet the requirements
of the content being accessed.
Some Internet connection operations may not be possible due to certain restrictions set by the Internet
Service Provider (ISP) supplying your Internet connection.
Any fees charged by an ISP including, without limitation, connection charges are your responsibility.
LAN
Router
@
Internet
Internet
LAN
WAN
ETHERNET
Cable modem
NOTE
••If you want to access the Internet directly on your display, the Internet connection should always be
on.
••If you cannot access the Internet, check the network conditions from a PC on your network.
••When you use Network Setting, check the LAN cable or check if DHCP in the router is turned on.
••If you do not complete the network settings, the network may not function correctly.
CAUTION
••Do not connect a modular telephone cable to the LAN port.
••Since there are various connection methods, please follow the specifications of your
telecommunication carrier or Internet Service Provider.
••Network Setting menu will not be available until the display is connected to a physical network.
••Since there are various connection methods, please follow the specifications of your
telecommunication carrier or Internet Service Provider.
USER SETTINGS
37
To configure the language
Remote Control (SETTINGS)
General
Menu Language
Select one of the languages on the menu displayed on the screen.
••Menu Language: sets a language for Signage.
To set the time/date
Remote Control (SETTINGS)
General
Time & Date
You can check or change the time.
••Time: you can set the time manually.
••Date: you can set the date manually.
To turn your monitor on or off automatically
Remote Control (SETTINGS)
General
Timers
You can set the On/Off Timer for your monitor.
••On Timer: you can set the time when your monitor turns on.
••Off Timer: you can set the time when your monitor turns off.
••No Signal Power Off (15 minutes): If you do not press any button within 15 minutes of the monitor
being turned on by the On Timer feature, the monitor turns
off automatically. To ensure the monitor does not turn off
automatically, set Auto Off to Off.
••Auto Power Off (4 Hours): If you do not press any button within four hours of the monitor being
turned on, the monitor enters Standby mode automatically.
NOTE
••On Time/Off Time can be saved for up to seven schedules; the monitor is turned on or off at the
preset time in the schedule list. If multiple preset times are stored in the schedule list, this function
works at the nearest time from the current time.
••Once the on or off time is set, these functions operate daily at the preset time.
••The scheduled power-off function works properly only when the device time is set correctly.
••When the scheduled power-on and power-off times are the same, the power-off time has priority over
the power-on time if the set is turned on, and vice versa if the set is turned off.
To reset your monitor settings
Remote Control (SETTINGS)
Resets all monitor settings.
General
Reset to Initial Settings
ENGLISH
General Settings
38
TROUBLESHOOTING
ENGLISH
TROUBLESHOOTING
No image is displayed
Problem
Is the product power cord
connected?
oes the Out of range message
D
appear?
oes the Check signal cable
D
message appear?
Action
yy
Check if the power cord is correctly plugged into the power
outlet.
yy
The signal from the PC (video card) is out of the vertical
or horizontal frequency range of the product. Adjust the
frequency range by referring to the Specifications in this
manual.
* Maximum resolution: 1920 x 1080 (60Hz)
yy
The signal cable between PC and product is not connected.
Check the signal cable.
yy
Press the INPUT menu in the remote Control to check the
input signal.
The Unknown Product message appears when the product is connected.
Problem
Did you install the driver?
Action
yy
Check if the Plug & Play function is supported by referring to
the video card user manual.
The screen image looks abnormal.
Problem
Is the screen position wrong?
The screen is displayed abnormally.
Action
yy
Check if the video card resolution and frequency are
supported by the product. If the frequency is out of range,
set to the recommended resolution in the Control Panel
Display Setting menu.
yy
The proper input signal is not connected to the signal port.
Connect the signal cable that matches with the source input
signal.
TROUBLESHOOTING
39
Problem
After-image appears when the
product is turned off.
Action
yy
If you use a fixed image for a long time, the pixels may be
damaged. Use the screen-saver function.
yy
When a dark image is displayed on the screen after an image
with high contrast (black and white or gray), this may cause
image sticking. This is normal for LCD screen products.
The audio function does not work.
Problem
No sound?
Sound is too dull.
Sound is too low.
Action
yy
See if the audio cable is connected properly.
yy
Adjust the volume.
yy
See if the sound is set properly.
yy
Select the appropriate equalizer sound.
yy
Adjust the volume.
Screen color is abnormal.
Problem
Screen has poor color resolution
(16 colors).
creen color is unstable or monoS
colored.
Do black spots appear on the
screen?
Action
yy
Set the number of colors to more than 24 bits (true color).
Select Control Panel - Display - Settings - Color Table menu
in Windows.
yy
Check the connection status of the signal cable. Or, re-insert
the PC video card.
yy
Several pixels (red, green, white, or black color) may appear
on the screen, which can be attributable to the unique
characteristics of the LCD panel. This is not a malfunction of
the LCD.
The operation does not work normally.
Problem
The power suddenly turned off.
Action
yy
Is the Timers set?
yy
Check the power control settings. Power interrupted.
ENGLISH
After-image appears on the product.
40
PRODUCT SPECIFICATIONS
ENGLISH
PRODUCT SPECIFICATIONS
32LS53A
LCD screen
Screen type
80 cm Wide Thin Film Transistor (TFT)
Liquid Crystal Display (LCD) Screen
Video signal
Pixel pitch
Diagonal length of the screen: 80 cm
0.36375 mm (H) x 0.36375 mm (V)
Maximum resolution
1920 x 1080 @ 60 Hz
Recommended
resolution
- This may not be supported on some OS or video card
types.
1920 x 1080 @ 60 Hz
Horizontal frequency
- This may not be supported on some OS or video card
types.
HDMI / DVI / DisplayPort: 30 kHz to 83 kHz
Vertical frequency
HDMI / DVI / DisplayPort: 56 Hz to 60 Hz
Synchronization
Digital
Input ports
Audio, LAN, HDMI 1, HDMI 2, IR & Light sensor,
Output ports
Power
Rated power
Pixel Sensor ,DVI, DisplayPort IN , USB, RS-232C IN
DisplayPort OUT, RS-232C OUT, SPEAKER OUT
AC 100-240 V~ 50/60 Hz
Power consumption
On Mode: 50 W Typ
Sleep Mode (DVI , HDMI): ≤ 1.0 W
Sleep Mode(DisplayPort): ≤ 0.7 W
Environmental
Conditions
Off Mode: ≤ 0.5W
Operating Temperature 0 °C to 40 °C
Operating Humidity
Storage Temperature
10 % to 80 %
-20 °C to 60 °C
Storage Humidity
5 % to 95 %
The specifications shown above may be changed without prior notice to improve quality.
PRODUCT SPECIFICATIONS
41
ENGLISH
Dimensions (Width
x Height x Depth) /
Weight
730.9 mm x 430.1 mm x 55.5 mm / 5.6 kg
730.9 mm x 480.2 mm x 207 mm / 5.8 kg
730.9 mm x 430.1 mm x 105.1 mm / 6.4 kg
730.9 mm x 480.2 mm x 207 mm / 6.6 kg
* Applicable only for models that support the speakers
Audio/AUDIO
RMS Audio Output
10 W + 10 W (R + L)
Input Sensitivity
0.7 Vrms
Speaker Impedance
8Ω
The specifications shown above may be changed without prior notice to improve quality.
42
PRODUCT SPECIFICATIONS
ENGLISH
42LS55A
LCD screen
42LS53A
Screen type
106 cm Wide Thin Film Transistor (TFT)
Liquid Crystal Display (LCD) Screen
Video signal
Pixel pitch
Diagonal length of the screen: 106 cm
0.4833 mm (H) x 0.4833 mm (V)
Maximum resolution
1920 x 1080 @ 60 Hz
Recommended
resolution
- This may not be supported on some OS or video card
types.
1920 x 1080 @ 60 Hz
Horizontal frequency
- This may not be supported on some OS or video card
types.
HDMI / DVI / DisplayPort: 30 kHz to 83 kHz
Vertical frequency
HDMI / DVI / DisplayPort: 56 Hz to 60 Hz
Synchronization
Digital
Input ports
Audio, LAN, HDMI 1, HDMI 2, IR & Light sensor,
Output ports
Power
Rated power
Pixel Sensor ,DVI, DisplayPort IN , USB, RS-232C IN
DisplayPort OUT, RS-232C OUT, SPEAKER OUT
AC 100-240 V~ 50/60 Hz 1.2 A
Power consumption
On Mode: 90 W Typ
Sleep Mode (DVI , HDMI): ≤ 1.0W
Sleep Mode(DisplayPort): ≤ 0.7W
Environmental
Conditions
Off Mode: ≤ 0.5W
Operating Temperature 0 °C to 40 °C
Operating Humidity
Storage Temperature
10 % to 80 %
-20 °C to 60 °C
Storage Humidity
5 % to 95 %
The specifications shown above may be changed without prior notice to improve quality.
PRODUCT SPECIFICATIONS
43
ENGLISH
Dimensions (Width
x Height x Depth) /
Weight
959.5 mm x 559 mm x 55.5 mm / 9.1 kg
959.5 mm x 610.8 mm x 218 mm / 9.3 kg
959.5 mm x 559 mm x 91 mm / 9.9 kg
959.5 mm x 610.8 mm x 218 mm / 10.1 kg
* Applicable only for models that support the speakers
Audio/AUDIO
RMS Audio Output
10 W + 10 W (R + L)
Input Sensitivity
0.7 Vrms
Speaker Impedance
8Ω
The specifications shown above may be changed without prior notice to improve quality.
44
PRODUCT SPECIFICATIONS
ENGLISH
47LS55A
LCD screen
47LS53A
Screen type
119 cm Wide Thin Film Transistor (TFT)
Liquid Crystal Display (LCD) Screen
Video signal
Pixel pitch
Diagonal length of the screen: 119 cm
0.5415 mm (H) x 0.5415 mm (V)
Maximum resolution
1920 x 1080 @ 60 Hz
Recommended
resolution
- This may not be supported on some OS or video card
types.
1920 x 1080 @ 60 Hz
Horizontal frequency
- This may not be supported on some OS or video card
types.
HDMI / DVI / DisplayPort: 30 kHz to 83 kHz
Vertical frequency
HDMI / DVI / DisplayPort: 56 Hz to 60 Hz
Synchronization
Digital
Input ports
Audio, LAN, HDMI 1, HDMI 2, IR & Light sensor,
Output ports
Pixel Sensor ,DVI, DisplayPort IN , USB, RS-232C IN
DisplayPort OUT, RS-232C OUT, SPEAKER OUT
Power
Rated power
AC 100-240 V~ 50/60 Hz 1.3 A
Power consumption
On Mode: 95 W Typ
Sleep Mode (DVI , HDMI): ≤ 1.0 W
Sleep Mode(DisplayPort): ≤ 0.7 W
Environmental
Conditions
Off Mode: ≤ 0.5W
Operating Temperature 0 °C to 40 °C
Operating Humidity
Storage Temperature
10 % to 80 %
-20 °C to 60 °C
Storage Humidity
5 % to 95 %
The specifications shown above may be changed without prior notice to improve quality.
PRODUCT SPECIFICATIONS
45
ENGLISH
Dimensions (Width
x Height x Depth) /
Weight
1071 mm x 621.6 mm x 55.8 mm / 12.2 kg
1071 mm x 675.1 mm x 247 mm / 12.5 kg
1071 mm x 621.6 mm x 90.4 mm / 13.0 kg
1071 mm x 675.1 mm x 247 mm / 13.3 kg
* Applicable only for models that support the speakers
Audio/AUDIO
RMS Audio Output
10 W + 10 W (R + L)
Input Sensitivity
0.7 Vrms
Speaker Impedance
8Ω
The specifications shown above may be changed without prior notice to improve quality.
46
PRODUCT SPECIFICATIONS
ENGLISH
55LS55A
LCD screen
55LS53A
Screen type
139 cm Wide Thin Film Transistor (TFT)
Liquid Crystal Display (LCD) Screen
Video signal
Pixel pitch
Diagonal length of the screen: 139 cm
0.630 mm (H) x 0.630 mm (V)
Maximum resolution
1920 x 1080 @ 60 Hz
Recommended
resolution
- This may not be supported on some OS or video card
types.
1920 x 1080 @ 60 Hz
Horizontal frequency
- This may not be supported on some OS or video card
types.
HDMI / DVI / DisplayPort: 30 kHz to 83 kHz
Vertical frequency
HDMI / DVI / DisplayPort: 56 Hz to 60 Hz
Synchronization
Digital
Input ports
Audio, LAN, HDMI 1, HDMI 2, IR & Light sensor,
Pixel Sensor ,DVI, DisplayPort IN , USB, RS-232C IN
Output ports
Power
Rated power
DisplayPort OUT, RS-232C OUT, SPEAKER OUT
AC 100-240 V~ 50/60 Hz 1.5 A
Power consumption
On Mode: 120 W Typ
Sleep Mode (DVI , HDMI): ≤ 1.0 W
Sleep Mode(DisplayPort): ≤ 0.7 W
Environmental
Conditions
Off Mode: ≤ 0.5W
Operating Temperature 0 °C to 40 °C
Operating Humidity
Storage Temperature
10 % to 80 %
-20 °C to 60 °C
Storage Humidity
5 % to 95 %
The specifications shown above may be changed without prior notice to improve quality.
PRODUCT SPECIFICATIONS
47
ENGLISH
Dimensions (Width
x Height x Depth) /
Weight
1240.9 mm x 717.2 mm x 56.8 mm / 17.8 kg
1240.9 mm x 770.8 mm x 247 mm / 18.1 kg
1240.9 mm x 717.2 mm x 91.4 mm / 18.6 kg
1240.9 mm x 770.8 mm x 247 mm / 18.9 kg
* Applicable only for models that support the speakers
Audio/AUDIO
RMS Audio Output
10 W + 10 W (R + L)
Input Sensitivity
0.7 Vrms
Speaker Impedance
8Ω
The specifications shown above may be changed without prior notice to improve quality.
48
PRODUCT SPECIFICATIONS
ENGLISH
65LS53A
LCD screen
Screen type
164 cm Wide Thin Film Transistor (TFT)
Liquid Crystal Display (LCD) Screen
Video signal
Pixel pitch
Diagonal length of the screen: 164 cm
0.744 mm (H) x 0.744 mm (V)
Maximum resolution
1920 x 1080 @ 60 Hz
Recommended
resolution
- This may not be supported on some OS or video card
types.
1920 x 1080 @ 60 Hz
Horizontal frequency
- This may not be supported on some OS or video card
types.
HDMI / DVI / DisplayPort: 30 kHz to 83 kHz
Vertical frequency
HDMI / DVI / DisplayPort: 56 Hz to 60 Hz
Synchronization
Digital
Input ports
Audio, LAN, HDMI 1, HDMI 2, IR & Light sensor,
Pixel Sensor ,DVI, DisplayPort IN , USB, RS-232C IN
Output ports
Power
Rated power
DisplayPort OUT, RS-232C OUT, SPEAKER OUT
AC 100-240 V~ 50/60 Hz
Power consumption
On Mode: 150 W Typ
Sleep Mode (DVI , HDMI): ≤ 1.0 W
Sleep Mode(DisplayPort): ≤ 0.7 W
Environmental
Conditions
Off Mode: ≤ 0.5W
Operating Temperature 0 °C to 40 °C
Operating Humidity
Storage Temperature
10 % to 80 %
-20 °C to 60 °C
Storage Humidity
5 % to 95 %
The specifications shown above may be changed without prior notice to improve quality.
PRODUCT SPECIFICATIONS
49
ENGLISH
Dimensions (Width
x Height x Depth) /
Weight
1461.6 mm x 843 mm x 57.6 mm / 30.9 kg
1461.6 mm x 900.6 mm x 313 mm / 32.3 kg
1461.6 mm x 843 mm x 92.6 mm / 31.7 kg
1461.6 mm x 900.6 mm x 313 mm / 33.1 kg
* Applicable only for models that support the speakers
Audio/AUDIO
RMS Audio Output
10 W + 10 W (R + L)
Input Sensitivity
0.7 Vrms
Speaker Impedance
8Ω
The specifications shown above may be changed without prior notice to improve quality.
50
PRODUCT SPECIFICATIONS
ENGLISH
Product Dimensions
The illustrations in this manual may differ from the actual product and accessories.
Please see “Mounting on a wall” section for screw sizes.
(Unit: mm)
32LS53A
55.5
730.9
38.5
15.1
14.6
430.1
480.2
18.6
207
265.4
121.7
200
200
The specifications shown above may be changed without prior notice to improve quality.
PRODUCT SPECIFICATIONS
ENGLISH
Product Dimensions
The illustrations in this manual may differ from the actual product and accessories.
Please see “Mounting on a wall” section for screw sizes.
42LS55A
(Unit: mm)
42LS53A
55.5
959.5
41.5
18.8
610.8
13.3
559
13.3
51
279.8
55.8
218
400
400
The specifications shown above may be changed without prior notice to improve quality.
52
PRODUCT SPECIFICATIONS
The illustrations in this manual may differ from the actual product and accessories.
Please see “Mounting on a wall” section for screw sizes.
47LS55A
(Unit: mm)
47LS53A
55.8
1071
13.2
40.8
18.7
675.1
13.2
621.6
335.5
247
129
400
400
ENGLISH
Product Dimensions
The specifications shown above may be changed without prior notice to improve quality.
PRODUCT SPECIFICATIONS
ENGLISH
Product Dimensions
The illustrations in this manual may differ from the actual product and accessories.
Please see “Mounting on a wall” section for screw sizes.
55LS55A
(Unit: mm)
55LS53A
56.8
13.2
1240.9
41.8
770.8
18.7
717.2
13.2
420.5
224.6
247
400
400
The specifications shown above may be changed without prior notice to improve quality.
53
54
PRODUCT SPECIFICATIONS
The illustrations in this manual may differ from the actual product and accessories.
Please see “Mounting on a wall” section for screw sizes.
(Unit: mm)
65LS53A
57.6
1461.6
14
43
843
14
900.6
20
14
420.5
400
530.8
400
278.5
530.8
164
ENGLISH
Product Dimensions
The specifications shown above may be changed without prior notice to improve quality.
313
PRODUCT SPECIFICATIONS
55
Resolution
Horizontal
frequency
(kHz)
Vertical
frequency (Hz)
640 x 480
31.469
59.94
800 x 600
37.879
60.317
1024 x 768
48.363
60
1280 x 720
44.772
59.855
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
DTV mode
Resolution
HDMI / DisplayPort (DTV)
480i
x
576i
x
480p
o
576p
o
720p
o
1080i
o
1080p
o
NOTE
••PC resolutions available for the Input Label
option in HDMI/DVI/DisplayPort input modes:
640 x 480/60 Hz, 1280 x 720/60 Hz, 1920
x 1080/60 Hz; 480p, 720p, and 1080p DTV
resolutions.
NOTE
••Vertical frequency: The product display
functions by the screen image changing
dozens of times every second like a
fluorescent lamp.
The vertical frequency or refresh rate is the
number of image displays per second. The
unit is Hz.
••Horizontal frequency: The horizontal interval
is the time taken to display one horizontal
line. When 1 is divided by the horizontal
interval, the number of horizontal lines
displayed every second can be tabulated as
the horizontal frequency. The unit is kHz.
ENGLISH
HDMI / DVI / DisplayPort (PC) Support Mode
56
IR CODES
ENGLISH
IR CODES
All models do not support the HDMI/USB function.
Some key codes may not be supported depending on the model.
Code (Hex)
Function
08
Remarks
Remote control button
C4
C5
ON
Remote control button
OFF
Remote control button
95
Energy Saving
Remote control button
0B
INPUT
Remote control button
10
Number Key 0
Remote control button
11
Number Key 1
Remote control button
12
Number Key 2
Remote control button
13
Number Key 3
Remote control button
14
Number Key 4
Remote control button
15
Number Key 5
Remote control button
16
Number Key 6
Remote control button
17
Number Key 7
Remote control button
18
Number Key 8
Remote control button
19
Number Key 9
Remote control button
02
Volume
Remote control button
03
Volume
Remote control button
E0
E1
(Page Up)
Remote control button
(Page Down)
Remote control button
DC
3D
Remote control button
32
1/a/A
Remote control button
2F
CLEAR
Remote control button
7E
Remote control button
79
ARC(MARK) (Aspect Ratio)
Remote control button
4D
PSM (Picture Mode)
Remote control button
09
MUTE
Remote control button
43
SETTINGS (Menu)
Remote control button
99
Auto Config.
Remote control button
40
Up ▲
Remote control button
41
Down ▼
Remote control button
06
Right ►
Remote control button
07
Left ◄
Remote control button
44
OK
Remote control button
28
BACK
Remote control button
IR CODES
Function
Remarks
TILE
Remote control button
5B
EXIT
Remote control button
72
ID ON (RED)
Remote control button
71
ID OFF (GREEN)
Remote control button
63
YELLOW
Remote control Button
61
BLUE
Remote control button
B1
Remote control button
B0
Remote control button
BA
Remote control button
8F
Remote control button
8E
Remote control button
5F
W.BAL
Remote control button
3F
S.MENU
Remote control button
7C
HOME
Remote control button
ENGLISH
Code (Hex)
7B
57
58
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
TO CONTROL MULTIPLE PRODUCTS
Use this method to connect several products to a single PC. You can control several products at a time
by connecting them to a single PC.
In the Option menu, the Set ID must be between 1 and 255 without being duplicated.
Connecting the cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
product on or off, select an input source or adjust the OSD menu from your PC.
PC
Monitor 1
Monitor 2
Monitor 3
Monitor 4
RS-232C Cable (sold separately)
RS-232C Configurations
8-Wire Configurations (Standard RS-232C cable)
PC
DCD
RXD
TXD
GND
DTR
DSR
RTS
CTS
1
2
3
5
4
6
7
8
D-Sub 9
(Female)
Set
1
3
2
5
6
4
8
7
DCD
TXD
RXD
GND
DSR
DTR
CTS
RTS
D-Sub 9
(Female)
Communication Parameter
Baud Rate: 9600 BPS
Data Length: 8 bit
Parity Bit: None
Stop Bit: 1 bit
Flow Control: None
Communication Code: ASCII code
Use a crossed (reverse) cable
NOTE
••When using three-wire connections (nonstandard), an IR daisy chain cannot be
used.
TO CONTROL MULTIPLE PRODUCTS
COMMAND
1
2
DATA
(Hexadecimal)
01
Power
k
a
00 to 01
02
Select input
x
b
See Select Input
03
Aspect Ratio
k
c
See Aspect Ratio
04
Energy Saving
j
q
See Energy Saving
05
Picture Mode
d
x
See Picture Mode
06
Contrast
k
g
00 to 64
07
Brightness
k
h
00 to 64
08
Sharpness
k
k
00 to 32
09
Color
k
i
00 to 64
10
Tint
k
j
00 to 64
11
Color temperature
x
u
00 to 64
12
Balance
k
t
00 to 64
13
Sound Mode
d
y
See Sound Mode
14
Mute
k
e
00 to 01
15
Volume Control
k
f
00 to 64
16
Time 1 (year/month/day)
f
a
See Time 1
17
Time 2 (hour/minute/second)
f
x
See Time 2
18
Off time schedule
f
c
00 to 01
19
On Time Schedule
f
b
00 to 01
20
Off Timer (Repeat/Time)
f
e
See Off Timer
21
On Timer (Repeat/Time)
f
d
See On Timer
22
On Timer Input
f
u
Refer to On Timer Input.
23
No Signal Power Off (15Min)
f
g
00 to 01
24
Auto Power Off (4 Hours)
m
n
00 to 01
25
Language
f
i
See Language
26
Reset
f
k
00, 02
27
Current Temperature
d
n
FF
28
Key
m
c
See Key
29
Time Elapsed
d
l
FF
30
Product Serial Number
f
y
FF
31
Software Version
f
z
FF
32
White Balance Red Gain
j
m
00 to FE
33
White Balance Green Gain
j
n
00 to FE
ENGLISH
Command Reference List
59
60
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
COMMAND
1
2
DATA
(Hexadecimal)
34
White Balance Blue Gain
j
o
00 to FE
35
White Balance Red Offset
s
x
00 to FE
36
White Balance Green Offset
s
y
00 to FE
37
White Balance Blue Offset
s
z
00 to FE
38
Backlight
m
g
00 to 64
39
Screen off
k
d
00 to 01
40
Tile Mode
d
d
00 to FF
41
Check Tile Mode
d
z
FF
42
Tile ID
d
i
See Tile ID
43
Natural Mode
d
j
00 to 01
44
DPM Select
f
j
00 to 07
45
Remote Control/Local Key Lock
k
m
00 to 01
46
Power On Delay
f
h
00 to 64
47
Fail Over Select
m
i
00 to 02
48
Fail Over Input Select
m
j
See Fail Over Input Select
49
IR Operation
t
p
00 to 02
50
Local Key Operation
t
o
00 to 02
51
Check the status
s
v
See Check the status
52
Check Screen
t
z
00 to 01
53
Speakers
d
v
00 to 01
* Note: Only the power and key commands can be used while media files are playing from a USB
device or internal/external memory. The commands other than the power and key commands will be
treated as NG. Some commands may not be supported depending on the model.
TO CONTROL MULTIPLE PRODUCTS
61
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command1]: identifies between the factory setting and the user setting modes.
* [Command2]: controls monitor sets.
* [Set ID]: U
sed for selecting a set you want to control. A unique Set ID can be assigned to each set
ranging from 1 to 255 (01H~FFH) under Settings in the OSD menu.
Selecting '00H' for Set ID allows the simultaneous control of all connected monitors.
* [Data]: Transmits command data.
Data count may increase depending on the command.
* [Cr]: Carriage Return. Corresponds to '0x0D' in ASCII code.
* [ ]: White Space. Corresponds to '0x20' in ASCII code.
Acknowledgement
[Command2][ ][Set ID][ ][OK/NG][Data][x]
* The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At
this time, if the data is FF, it indicates the present status data. If the data is in data write mode, it returns
the data of the PC computer.
* If a command is sent with Set ID '00' (=0x00), the data is reflected to all monitor sets and each monitor
set does not send an acknowledgement (ACK).
* If the data value 'FF' is sent in control mode via RS-232C, the current setting value of a function can
be checked (only for some functions).
*Some commands are not supported depending on the model.
ENGLISH
Transmission/Reception Protocol
62
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
01. Power (Command: k a)
Controls the power on/off of the set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
04. Energy Saving (Command: j q)
Sets the Energy Saving.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
Data
00: Off
01: Minimum
02: Medium
03: Maximum
04: Automatic
05: Screen off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
*The acknowledgement signal is returned properly only
when the monitor is fully powered on.
* There may be a delay between the transmission and
acknowledgement signals.
** This may not be supported depending on the model.
02. Select Input (Command: x b)
Selects an input signal.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
05. Picture Mode (Command: d x)
Selects a picture mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data
Data
70: DVI (PC)
80: DVI (DTV)
90: HDMI1 (DTV)
A0: HDMI1 (PC)
91: HDMI2 (DTV)
A1: HDMI2 (PC)
C0: DisplayPort (DTV)
D0: DisplayPort (PC)
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
00: Vivid
01: Standard
02: Cinema
03: Sports
04: Game
05: Expert 1
06: Expert 2
08: APS
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
* Some input signals may not be supported depending on
the model.
03. Aspect Ratio (Command: k c)
Adjusts the aspect ratio.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data
01: 4:3
02: 16:9
04: Zoom
06: Set by Program
09: Just Scan (720p or higher)
10 to 1F: Cinema Zoom 1 to 16
* Available data types differ depending on the input signal.
For more information, see the aspect ratio section of the
owner’s manual.
* The aspect ratio may differ depending on the model's
input configuration.
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
Adjusts the screen contrast.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Contrast 0 to 100
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
TO CONTROL MULTIPLE PRODUCTS
Data
00 to 64: Brightness 0 to 100
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
10. Tint (Command: k j)
Adjusts the screen tint.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Tint red 50 to green 50
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
08. Sharpness (Command: k k)
Adjusts the screen sharpness.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
11. Color Temperature (Command: x u)
Adjusts the screen color temperature.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data
00 to 32: Sharpness 0 to 50
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
Data
00 to 64: warm 50 to cool 50
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i)
Adjusts the screen color.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
12. Balance (Command: k t)
Adjusts the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Color 0 to 100
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
Data
00 to 64: left 50 to right 50
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
07. Brightness (Command: k h)
Adjusts the screen brightness.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
63
64
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
13. Sound mode (Command: d y)
Selects a sound mode.
Transmission
[d][y][ ][Set ID][ ][Data][Cr]
17. Time 2 (hour/minute/second) (Command: f x)
Adjusts the Time 2 (hour/minute/second) value.
Transmission
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data
01: Standard
02: Music
03: Cinema
04: Sports
05. Game
07: News
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
Data1
00 to 17: 00 to 23 hours
Data2
00 to 3B: 00 to 59 minutes
Data3
00 to 3B: 00 to 59 seconds
* Enter "fx [Set ID] ff" to view the Time 2 (hour/minute/
second) settings.
** This function is only available when Time 1 (year/month/
day) is set.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
14. Mute (Command: k e)
Mutes/unmutes the sound.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data
00: Mute
01: Unmute
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
18. Off Time Schedule (Command: f c)
Enables/disables the Off Time Schedule.
Transmission
[f][c][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
15. Volume Control (Command: k f)
Adjusts the playback volume.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Volume 0 to 100
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
19. On Time Schedule (Command: f b)
Enables/disables the On Time schedule.
Transmission
[f][b][ ][Set ID][ ][Data][Cr]
16. Time 1 (year/month/day) (Command: f a)
Adjusts the Time 1 (year/month/day) value.
Transmission
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
04~1B: year 2014 to 2037
Data2
01 to 0C: January to December
Data3
01 to 1F: 1st to 31st
* Enter "fa [Set ID] ff" to view the Time 1 (year/month/day)
settings.
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data
00: Off
01: On
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
TO CONTROL MULTIPLE PRODUCTS
Data1
1. f1h to f7h (reading data)
F1: reads the 1st Off Timer data
F2: reads the 2nd Off Timer data
F3: reads the 3rd Off Timer data
F4: reads the 4th Off Timer data
F5: reads the 5th Off Timer data
F6: reads the 6th Off Timer data
F7: reads the 7th Off Timer data
2. e1h-e7h (delete one index), e0h (delete all indexes)
E0: erases all Off Timer settings
E1: erases the 1st Off Timer setting
E2: erases the 2nd Off Timer setting
E3: erases the 3rd Off Timer setting
E4: erases the 4th Off Timer setting
E5: erases the 5th Off Timer setting
E6: erases the 6th Off Timer setting
E7: erases the 7th Off Timer setting
3. 01h to 0Ch (sets the day of the week for the Off Timer)
01: Once
02. Daily
03: Mon - Fri
04: Mon - Sat
05: Sat - Sun
06. Every Sunday
07. Every Monday
08. Every Tuesday
09. Every Wednesday
0A. Every Thursday
0B. Every Friday
0C. Every Saturday
Data2
00 to 17: 00 to 23 hours
Data3
00 to 3B: 00 to 59 minutes
* To read or delete the Off Time Schedule list, [Data2]
[Data3] must be set to FFH.
Example 1: fe 01 f1 ff ff – reads the first index data in Off
Timer.
Example 2: fe 01 e1 ff ff - deletes the first index data from
Off Timer.
Example 3: fe 01 04 02 03 - sets Off Timer to 02:03 from
Monday to Saturday.
* This function is only available when Time 1 (year/month/
day) and Time 2 (hour/minute/second) are set.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
21. On timer (Repeat/Time) (Command: f d)
Configures On Timer (Repeat/Time) settings.
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. f1h to f7h (reading data)
F1: reads the 1st On Timer data
F2: reads the 2nd On Timer data
F3: reads the 3rd On Timer data
F4: reads the 4th On Timer data
F5: reads the 5th On Timer data
F6: reads the 6th On Timer data
F7: reads the 7th On Timer data
2. e1h-e7h (delete one index), e0h (delete all indexes)
E0: erases all On Timer settings
E1: erases the 1st On Timer setting
E2: erases the 2nd On Timer setting
E3: erases the 3rd On Timer setting
E4: erases the 4th On Timer setting
E5: erases the 5th On Timer setting
E6: erases the 6th On Timer setting
E7: erases the 7th On Timer setting
3. 01h to 0Ch (sets the day of the week for the On Timer)
01: Once
02. Daily
03: Mon - Fri
04: Mon - Sat
05: Sat - Sun
06. Every Sunday
07. Every Monday
08. Every Tuesday
09. Every Wednesday
0A. Every Thursday
0B. Every Friday
0C. Every Saturday
Data2
00 to 17: 00 to 23 hours
Data3
00 to 3B: 00 to 59 minutes
* To read or delete an On Time schedule list, [Data2][Data3]
must be set to FFH.
Example 1: fd 01 f1 ff ff - reads the first index data from On
Timer.
Example 2: fd 01 e1 ff ff - deletes the first index data from
On Timer.
Example 3: fd 01 04 02 03 - sets On Timer to 02:03 from
Monday to Saturday.
* This function is only available when Time 1 (year/month/
day) and Time 2 (hour/minute/second) are set.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
ENGLISH
20. Off Timer (Repeat/Time) (Command: f e)
Configures Off Timer (Repeat/Time) settings.
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
65
66
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
22. On Timer Input (Command: f u)
Select an external input for the current On Time setting and
add a new schedule.
Transmission
[f][u][ ][Set ID][ ][Data1][Cr]
[f][u][ ][Set ID][ ][Data1][][Data2][Cr]
Data (Add schedule)
70: DVI
90: HDMI1 (DTV)
91: HDMI2 (DTV)
C0: Display Port (DTV)
Data1 (Read schedule)
1. f1h to f7h (Read data)
F1: Select the 1st schedule input
F2: Select the 2nd schedule input
F3: Select the 3rd schedule input
F4: Select the 4th schedule input
F5: Select the 5th schedule input
F6: Select the 6th schedule input
F7: Select the 7th schedule input
Data2 (Read schedule)
FF
* To read the schedule input, enter FF for [Data2].
If no schedule is available for [Data1] when attempting to
read the schedule data, the text ‘NG’ will be displayed and
the operation will fail.
(Example 1: fu 01 90 - Move each schedule input down one
row and save the 1st schedule input in HDMI mode.)
(Example 2: fu 01 f1 ff - Read the 1st schedule input.)
* This function is supported only when 1 (Year/Month/Day),
2 (Hour/Minute/Second), On Time (Repeat Mode/Time)
are set.
** It may not be supported depending on the model.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]
23. No Signal Power Off (15Min) (Command: f g)
Configures the automatic standby settings.
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
24. Auto Power Off (4 Hours) (Command: m n)
Configures the automatic off settings.
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: 4 hours
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
25. Language (Command: f i)
Sets the OSD language.
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Data
00: Czech
01: Danish
02: German
03: English
04: Spanish (Europe)
05: Greek
06: French
07: Italian
08: Dutch
09: Norwegian
0A: Portuguese
0B: Portuguese (Brazil)
0C: Russian
0D: Finnish
0E: Swedish
0F: Korean
10: Chinese (Cantonese)
11: Japanese
12: Chinese (Mandarin)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
TO CONTROL MULTIPLE PRODUCTS
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
29. Time Elapsed (Command: d l)
Checks the elapsed time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data
00: Picture Reset
02: Initial Settings (factory reset)
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
Data
FF: Read status
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
27. Current temperature (Command: d n)
Checks the inside temperature.
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
30. Product serial number (Command: f y)
Checks the serial number of the product.
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data FF: Check the status
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
* Temperature is displayed as a hexadecimal value.
Data
FF: Check product serial number
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
* Data is in ASCII code.
28. Key (Command: m c)
Sends a key code for the IR remote control.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
31. Software Version (Command: f z)
Checks the software version of the product.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data
IR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
Data
FF: Check software version
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
For key codes, see IR Codes.
* Some key codes are not supported depending on the
model.
* The data received is shown as a hexadecimal value.
ENGLISH
26. Reset (Command: f k)
Performs the Picture and Factory Reset functions.
67
68
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
32. White balance red gain (Command: j m)
Adjusts the white balance red gain value.
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
Data
00 to FE: Red Gain 0 to 254
FF: checks the red gain value
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
33. White Balance Green Gain (Command: j n)
Adjusts the white balance green gain value.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
Data
00 to FE: Green Gain 0 to 254
FF: checks the green gain value
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
34. White Balance Blue Gain (Command: j o)
Adjusts the white balance blue gain value.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data
00 to FE: Blue Gain 0 to 254
FF: checks the blue gain value
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
35. White Balance Red Offset (Command: s x)
Adjusts the white balance red offset value.
Transmission
[s][x][ ][Set ID][ ][Data][Cr]
Data
00 to FE: Red Offset 0 to 254
FF: checks the red offset value
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
36. White Balance Green Offset (Command: s y)
Adjusts the white balance green offset value.
Transmission
[s][y][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Green Offset 0 to 254
FF: checks the green offset value
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
37. White Balance Blue Offset (Command: s z)
Adjusts the white balance blue offset value.
Transmission
[s][z][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Blue Offset 0 to 254
FF: checks the blue offset value
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
TO CONTROL MULTIPLE PRODUCTS
Data 00 to 64: Backlight 0 to 100
Acknowledgement
[g][][set ID][][OK/NG][Data][x]
41. Check Tile Mode (Command: d z)
Checks the tile mode.
Transmission
[d][z][ ][Set ID][ ][Data][Cr]
Data
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
Data2
Data3
39. Screen Off (Command: k d)
Turns the screen on or off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00: turns the screen on
01: turns the screen off
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
FF: checks the tile mode
00: tile mode off
01: tile mode on
00 to 0F: tile column
00 to 0F: tile row
42. Tile ID (Command: d i)
Sets the tile ID value of the product.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
Data 01 to E1: Tile ID 1 to 225**
FF: checks the tile ID
** The data value cannot exceed the value of row x
column.
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
* When a data value that exceeds the value of row x
column is entered (except 0xFF),
ACK becomes NG.
40. Tile Mode (Command: d d)
Sets the Tile Mode and sets values for the tile rows and
columns.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data 00 to FF: The first byte - tile column
The second byte - tile row
* 00, 01, 10, and 11 mean that the tile mode is off
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
43. Natural Mode (in Tile mode) (Command: d j)
When displaying the image naturally, the part of the image
that would normally be displayed in the gap between
the monitors is omitted.
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
38. Backlight (Command: m g)
Adjusts the backlight brightness.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
69
70
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
44. DPM Select (Command: f j)
To set the DPM (Display Power Management) function.
Transmission
[f][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: 5 seconds
02: 10 seconds
03: 15 seconds
04: 1 minutes
05: 3 minutes
06: 5 minutes
07: 10 minutes
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
45. Remote Control/Local Key Lock (Command: k m)
Adjusts the remote control/local key (front) lock.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 00: Off (Lock Off)
01: On (Lock On)
* When the remote control and front keys are locked
in Standby mode, you cannot turn on the power on by
using the remote control or front power button.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
47. Fail Over Select (Command: m i)
Selects an input mode for auto switch.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Auto
02: Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
48. Fail Over Input Select (Command: m j)
Selects an input source for auto switch.
* This command is only available when the Fail Over
(auto) mode is set to Custom.
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr][ ]
[Data4][ ][Data5][Cr]
Data 1 to 4 (Input priority: 1 to 4)
70: DVI
90: HDMI1
91: HDMI2
C0: DisplayPort
Acknowledgement
[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4]
[ ][Data5][x]
Data 1 to 4 (Input priority: 1 to 4)
70: DVI
90: HDMI1
91: HDMI2
C0: DisplayPort
46. Power On Delay (Command: f h)
Sets the schedule delay when the power turns on. (unit:
seconds).
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: min. 0 to maximum 100 (seconds)
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x
49. IR Operation (Command: t p)
Configures the IR operation settings of the product.
Transmission
[t][p][ ][Set ID][ ][Data][Cr]
Data 00: locks off all of the keys
01: locks on all of the keys except the Power key
02: locks on all of the keys
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
TO CONTROL MULTIPLE PRODUCTS
Data
00: locks off all of the keys
01: locks on all of the keys except the Power
key
02: locks on all of the keys
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
51. Status (Command: s v)
Checks the current signal status of the product.
Transmission
[s][v][ ][Set ID][ ][Data][ ][FF][Cr]
Data 02: checks whether there is a signal or not
10: RGB sensing OK/NG (Check Screen)
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][Data1][x]
Data: 02 (when a signal is found)
Data1 00: no signal
01: there is a signal
Data: 10 (Check Screen)
Data1 00: Check Screen result NG
07: Check Screen result OK
* Treated as NG if Check Screen is set to Off
52. Check Screen (Command: t z)
Sets Check Screen.
Transmission
[t][z][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
53. Speaker (Command: d v)
Sets the speaker function.
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
50. Local Key Operation (Command: t o)
Configures the local key operation settings of the product.
Transmission
[t][o][ ][Set ID][ ][Data][Cr]
71
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an
accessible place for future reference.
The model and serial number of the SET
is located on the back and one side of the
SET. Record it below should you ever need
service.
MODEL
SERIAL
To obtain the source code under GPL,
LGPL, MPL and other open source
licenses, that is contained in this product,
please visit http://opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers
and copyright notices are available for
download.
LG Electronics will also provide open
source code to you on CD-ROM for a
charge covering the cost of performing
such distribution (such as the cost of
media, shipping and handling) upon email
request to opensource@lge.com. This offer
is valid for three (3) years from the date on
which you purchased the product.
WARNING -This is a class A product. In a
domestic environment this product may cause
radio interference in which case the user may
be required to take adequate measures.
Temporary noise is normal when powering
ON or OFF this device.
Download PDF