LG | 65VS10 | LG 65VS10-BAA Owner’s Manual

ENG
ENGLISH
OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating the
your set and retain it for future reference.
MONITOR SIGNAGE MODELS
65VS10
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
CONTENTS
3
LICENSES
35 MAKING CONNECTIONS
36
4
ASSEMBLING AND
PREPARING
4
Unpacking
5
Optional Accessories
6
Parts and buttons
7
Connecting the Speakers
7
Portrait Layout
8
Installing on a wall
9
REMOTE CONTROL
11
USING THE MONITOR SET
11
Connecting to a PC
11
- Using the input list
12
- RGB connection
12
- HDM/DVI connection
13
- HDMI connection
14 CUSTOMIZING SETTINGS
Connecting to a HD receiver, DVD, Camcorder, Camera, Gaming Device or VCR
player
36
- HDMI connection
36
- HDMI/DVI connection
37
- Component connection
37
- AV(CVBS) connection
38
Connecting to the LAN
38
- LAN connection
39
Daisy Chain Monitors
39
- RGB Mode
39
- AV(CVBS) Mode
40 TROUBLESHOOTING
43 SPECIFICATIONS
47 IR CODES
48 CONTROLLING THE MULTIPLE
PRODUCT
14
Accessing main menus
15
- PICTURE settings
48
Connecting the cable
20
- AUDIO settings
48
RS-232C Configurations
21
- TIME settings
48
Communication Parameter
22
- OPTION settings
49
Command reference list
24
- TILE settings
51
Transmission / Receiving protocol
26 ENTERTAINMENT
26
Using integrated media features
26
- Connecting USB storage devices
27
- Browsing files
29
- Viewing Photos
30
- Listening to Music
31
- Viewing Movies
34
- DivX registration code
34
- Deactivating the DivX feature
LICENSES
3
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.
DivX Certified® to play DivX® video, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories. “Dolby “and the
double-D symbol are trademarks of Dolby Laboratories.
ENGLISH
LICENSES
4
ASSEMBLING AND PREPARING
ENGLISH
ENG
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
POWER
ENERGY
MONITOR
INPUT
OFF
ON
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
ARC
PSM
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
BACK
TILE
S.MENU
OK
EXIT
ID
ON
OFF
Remote control and Batteries
CD (Owner's Manual)/ Card
Power Cord
D-Sub Signal Cable
CAUTION
Do not use any pirated items to ensure the safety and product life span.
yy
Any damages or injuries by using pirated items are not covered by the warranty.
yy
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.
ASSEMBLING AND PREPARING
5
Optional Accessories
Speaker
Screws/ Cable
Cable holder/
Cable Tie
Speaker kit
NOTE
Cable holder/Cable tie may not be available in some areas or for some models.
yy
Optional accessories are not included for all models.
yy
ENG
ENGLISH
Without prior notice, optional accessories are subject to change to improve the performance of the product,
and new accessories may be added. The illustrations in this manual may differ from the actual product and
accessories.
6
ASSEMBLING AND PREPARING
Parts and buttons
ENGLISH
ENG
Power Indicator
 Lighting On: Turned on
 Lighting Off: Turned off
Screen Buttons
Screen Marks
RS-232C
(CONTROL)
HDMI / DVI
RGB IN
AUDIO
(RGB/DVI)
COMPONENT IN
AV IN / OUT
OUT
IN
IR Receiver
USB
LAN
IN
RGB OUT
VIDEO
AUDIO
VIDEO
AUDIO
OUT
Connection panel ( See p.36 to p.38 )
Screen Marks
Description
INPUT
Changes the input source.
MENU
Accesses the main menus, or saves your input and exits the menus.
▼▲
Adjust the up and down.
◄►
Adjusts the volume level.
AUTO/SET
Auto setup when using RGB input. It is also the Set or enter button to make changes in
the on-screen menus.
Turns the power on or off.
/I
IR Receiver
This is where the unit receives signals from the remote control.
Power Indicator
This Indicator lights up green when the display operates normally(on mode). If the
display is in sleep (Energy Saving) mode, this indicator color changes to amber.
NOTE
You can set the Power indicator to on or off by selecting OPTION in the main menu.
yy
ASSEMBLING AND PREPARING
Portrait Layout
- Only on some models.
- Only on some models.
1 Mount the speaker by using a screw as shown
in the following. Then connect the speaker
cable.
2 After installing your speakers, use holders and
cable ties to organize the speaker cables.
When installing in a Portrait Layout, rotate the
monitor clockwise 90 degrees (when facing the
screen).
ENG
ENGLISH
Connecting the Speakers
7
8
ASSEMBLING AND PREPARING
Installing on a wall
CAUTION
ENGLISH
ENG
Install the monitor at least 10 cm away from the
wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from
your local retail store. Please refer to the manual
to install and set up a tilting wall mounting bracket.
10 cm
Disconnect the power cord first, and then
yy
move or install the Monitor set. Otherwise
electric shock may occur.
If you install the Monitor set on a ceiling or
yy
slanted wall, it may fall and result in severe
injury. Use an authorized LG wall mount
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
yy
cause damage to the Monitor set and void
your warranty.
Use the screws and wall mounts that
yy
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
10 cm
10 cm
10 cm
10 cm
If you intend to mount the monitor to a wall, attach
Wall mounting interface (optional parts) to the back
of the set.
When you install the monitor using the wall
mounting interface (optional parts), attach it
carefully so it will not drop.
1 Please, Use the screw and wall mount interface
in accordance with VESA Standards.
2 If you use screw longer than standard, the
monitor might be damaged internally.
3 If you use improper screw, the product might
be damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
4 VESA compatible.
5 Please use VESA standard as below.
785mm(31 inch) or greater
yy
* Fastening screw: Diameter 6.0 mm x Pitch 1.0
mm x Length 10 mm
(32 inch is Diameter 4.0 mm x Pitch 0.7 mm x
Length 10 mm)
NOTE
The wall mount kit includes an installation
yy
manual and necessary parts.
The wall mount bracket is optional. You can
yy
obtain additional accessories from your local
dealer.
The length of screws may differ depending
yy
on the wall mount. Be sure to use the proper
length.
For more information, refer to the
yy
instructions supplied with the wall mount.
9
REMOTE CONTROL
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the Monitor set correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this
yy
may damage the remote control.
Make sure to point the remote control to the
yy
remote control sensor on the Monitor set.
POWER
ENERGY
MONITOR
1
4
7
INPUT
OFF
ON
.,!
GHI
PQRS
1/a/A
2
5
8
0
SAVING
TUV
3
6
9
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
ARC
PSM
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
S.MENU
OK
BACK
TILE
EXIT
ID
ON
ENERGY SAVING
Adjusts the brightness of
the screen to reduce energy
consumption.
(POWER)
Turns the Monitor set on or off.
POWER
MONITOR ON / OFF
Turn off the monitor
and ENERGY
then
MONITOR
turn
it
back
on.
OFF
ON
OFF
POWER
INPUT
Selects the input mode.
INPUT
ENERGY
MONITOR
SAVING
.,!
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
BRIGHT
PSM
(VOLUME)
NESS
Adjusts the volume level.
.,!
GHI
PQRS
-*#
Selects the AspectMARK
Ratio
ARC
Mode.
OFF
ON
1/a/A Button
is not
This button selection
applicable.
1/a/A CLEAR
ARC
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
Number and Alphabet buttons
Enters numbers.
The alphabet selection is not
applicable.
DEF
MNO
WXYZ
CLEAR
This button selection is not
applicable.
MARK
ARC
P
A
G
E
PSM
MUTE
PSM
Selects theMENU
PictureAUTO
StatusS.MENU
Mode.
INPUT
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
MUTE
Mutes all sounds.
OK
OK
S.MENU
BRIGHTNESS Key
Adjust the brightness by
pressing the Up and Down
buttons on the remote control.
In USB mode, the OSD menu
has the Page function to
move to the next file list.
ENG
ENGLISH
REMOTE CONTROL
10
USING THE MONITOR SET
ENGLISH
ENG
POWER
ENERGY
MONITOR
INPUT
OFF
ON
1
4
7
.,!
GHI
PQRS
1/a/A
2
5
8
0
SAVING
TUV
3
6
9
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
ARC
PSM
POWER
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
BACK
TILE
S.MENU
OK
ENERGY
MONITOR
MENU (See p.14)
Accesses the main menus
or saves your input and exit
menus.
.,!
GHI
PQRS
1/a/A
TUV
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
ARC
Navigation buttons
Scrolls through menus or
options.
PSM
P
BRIGHT A
NESS G
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)
E
MUTE
MENU
OK
Selects menus or options and
confirms your input.
AUTO
S.MENU
S.MENU
(SuperSign Menu Key)
This button selection is not
applicable.
OK
BACK
TILE
ID
ON
ID ON/OFF
When the number of input ID
is equal to the number of ID
Mode, you can control the
monitor which you want in the
multi display condition.
OFF
SAVING
MARK
BACK
Allows the user to move back
one step.
EXIT
ID
ON
OFF
ON
INPUT
OFF
EXIT
EXIT
Clears all on-screen displays
and returns to Monitor set
viewing from any menu.
TILE
Selects the TILE Mode.
USB Menu control buttons
Controls media playback.
USING THE MONITOR SET
11
Connecting to a PC
Your Monitor set supports the Plug & Play* feature.
* Plug & Play: The function when a PC recognizes
a connected device that users connect to a PC
and turn on, without device configuration or user
intervention.
Using the input list
Selecting an input source
1 Press INPUT to access the input source list.
-The connected device displays on each input
source.
2 Press the Navigation buttons to scroll to one of
the input sources and press OK.
Input source
NOTE
It is recommended to use the Monitor set
yy
with an HDMI connection for the best image
quality.
If you turn the Monitor set on when cold, the
yy
screen may flicker. This is normal.
Some red, green, or blue spots may appear
yy
on the screen. This is normal.
CAUTION
Connect the signal
yy
input cable and tighten
it by turning the screws
clockwise.
Do not press the screen with your finger for
yy
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the
yy
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
Description
AV(CVBS)
A VCR or other external devices
Component
Older devices that do not have
HDMI.
RGB
Computer input.
HDMI/DVI
Preferred connection type.
Supports high resolution inputs.
ENG
ENGLISH
USING THE MONITOR SET
12
USING THE MONITOR SET
ENGLISH
ENG
RGB connection
HDM/DVI connection
Transmits the analog video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the D-sub 15 pin cable as shown the
following illustrations.
Select RGB input source.
Transmits the digital video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the HDMI/DVI cable as shown the
following illustrations.
Select HDMI/DVI input source.
PC
PC
PC/MAC
(not included)
PC
(not included)
Macintosh Adapter
(not included)
Back of the product.
NOTE
Back of the product.
NOTE
Apple computers may
yy
require an adapter
to connect to this
monitor. Call or visit
their web site for more
information.
When using computer input with HDMI, you
yy
must set the label of that HDMI input to PC.
Use a shielded signal interface cable, such
yy
as D-sub 15 pin signal cable and DVI to
HDMI cable, with a ferrite core to maintain
standard compliance for the product.
USING THE MONITOR SET
13
HDMI connection
PC
(not included)
HDMI/DVI
Back of the product.
NOTE
Use a High Speed HDMI™ Cable.
yy
Please check the PC environment if you
yy
cannot hear the sound in HDMI mode. Some
PCs require you to manually change the
default audio output to HDMI.
If you want to use HDMI-PC mode, you must
yy
set the input label to PC mode.
ENG
ENGLISH
Transmits the digital video and audio signals from
your PC to the Monitor set. Connect the PC and
the Monitor set with the HDMI cable as shown in
the following illustrations.
Select HDMI/DVI input source.
14
CUSTOMIZING SETTINGS
ENGLISH
ENG
CUSTOMIZING SETTINGS
Accessing main menus
MARK
ARC
PSM
1 Press MENU to access the main menus.
P
BRIGHT A
NESS G
E
MUTE
MENU
2 Press the Navigation buttons to scroll to one of the following menus and
S.MENU
OK
press OK.
BACK
3 Press the Navigation buttons to scroll to the setting or option you want
AUTO
TILE
EXIT
ID
ON
OFF
and press OK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
PICTURE (See p.15)
Adjusts the image size,
quality, or effect.
PICTURE
OPTION (See p.22)
Customizes the general
settings.
OPTION
AUDIO (See p.20)
Adjusts the sound quality,
effect, or volume level.
AUDIO
TILE
TIME
USB
TILE (See p.24)
Adjusts the tile options.
TIME (See p.21)
Sets the time, date, or
Timer feature.
USB (See p.26)
Using integrated media
features.
CUSTOMIZING SETTINGS
PICTURE settings
PICTURE
OK
: 16:9
Energy Saving : Off
2 Press the Navigation buttons to scroll to PICTURE and
press OK.
3 Press the Navigation buttons to scroll to the setting or
option you want and press OK.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Picture Mode : Standard
• Backlight 70
• Contrast • Brightness 50
• Sharpness 70
• Color • Tint • Advanced Control
• Picture Reset
90
60
0
Screen
The available picture settings are described in the following:
Setting
Aspect Ratio
Description
Changes the image size to view images at its optimal size (See p.18 to p.19).
Energy Saving Sets to automatically adjust the screen brightness corresponding to the surroundings.
Level
Off
100% light
Level 1
80% light
Level 2
60% light Level 3
40% light
NOTE
If the 'Picture Mode' is set to 'Cinema', the 'Energy saving' mode is disabled.
yy
Picture Mode
Selects one of the preset image or customizes options in each mode for the best Monitor set screen
performance. You are also able to customize advanced options of each mode.
The available preset picture modes vary depending on the Monitor set .
Mode
Vivid
Adjusts the video image for the retail environment by enhancing the contrast,
brightness, Color, and sharpness.
Standard
Adjusts the image for the normal environment.
Cinema
Optimizes the video image for a cinematic look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and dynamic actions by emphasizing primary
Colors such as white, grass, or sky blue.
Game
Optimizes the video image for a fast gaming screen such as PCs or games.
Expert1/2
Adjusts the detailed video image settings for video experts as well as general
viewers. Refer to the Basic image options. (See p.16).
ENG
ENGLISH
Aspect Ratio 1 Press MENU to access the main menus.
Move
15
16
CUSTOMIZING SETTINGS
Setting
ENGLISH
ENG
SCREEN
(In RGB
Mode Only)
Description
Customizes the PC display options in RGB mode.
Option
Resolution
Selects a proper resolution. See “Customizing PC display options”.
Auto Config.
Sets to adjust the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the configuration is
in progress.
Position/Size/
Phase
Adjusts the options when the picture is not clear, especially when characters are
shaky, after the auto configuration.
Reset
Restores the options to the default setting.
Basic image options
Setting
Description
Backlight
djusts the brightness of the screen by controlling the LCD backlight. If you decrease the brightness
A
level, the screen becomes darker and the power consumption will be reduced without any video
signal loss.
Contrast
Increases or decreases the gradient of the video signal. You may use Contrast when the bright part
of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture. You may use Brightness when the dark part of the
picture is saturated.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower
the level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Advanced
Control
Customizes the advanced options. Refer to the Advanced image options. (See p.17).
Picture Reset
Restores the options to the default setting.
NOTE
If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport or Game
yy
the subsequent menus will be automatically set.
You cannot adjust color and tint in the RGB-PC / HDMI-PC mode.
yy
When the Expert 1,2 is selected, you can select Backlight, Contrast, Brightness, H Sharpness, V
yy
Sharpness, Color or Tint .
CUSTOMIZING SETTINGS
17
Advanced image options
Dynamic
Contrast
Description
Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.
Option
Cool
Sets the screen color to a bluish tone.
Medium
Sets the screen to the standard color.
Warm
Sets the screen color to a reddish tone.
Adjusts the contrast to keep it at the best level according to the brightness of the screen. The
picture is improved by making bright parts brighter and dark parts darker. (This function can be used
only under AV(CVBS) and Component.)
Dynamic Color Adjusts screen Colors so that they look livelier, richer and clearer. This feature enhances
hue, saturation and luminance so that red, blue, green and white look more vivid. (This function can
be used only under AV(CVBS) and Component.)
Noise
Reduction
educes screen noise without compromising video quality. (This function can be used only under
R
AV(CVBS) and Component.)
Gamma
Set your own gamma value. On the monitor, high gamma values display whitish images and low
gamma values display high contrast images.
Black Level
» Low: The picture of the screen gets darker.
» High: The picture of the screen gets brighter.
Set black level of the screen to proper level.
(Function works in the following mode - AV(CVBS), Component, HDMI-DTV)
Film Mode
You can watch a cinema-like video by eliminating judder effect.
Use this function when you watch movies.
White Balance
This is the function to adjust the overall Color of the image to the feeling you want.
(Function works in the following mode - Expert 1, Expert 2 Picture mode)
Color
Management
System
As the tool used by the experts to make adjustments by using the test patterns, this does not
affect other Colors but can be used to selectively adjust the 6 Color areas (Red/Green/Blue/
Cyan/ Magenta/Yellow). Color difference may not be distinctive even when you make the
adjustments for the general video.
Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
» Red/Green/Blue/Yellow/Cyan/Magenta Color: The adjustment range is -30 to +30.
» Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range is -30 to +30.
(Function works in the following mode - Expert 1, Expert 2 Picture mode)
ENG
ENGLISH
Setting
Colour
Temperature
18
CUSTOMIZING SETTINGS
Aspect Ratio
ENGLISH
ENG
Resize the image to view the image at its optimal
size by pressing ARC button.
CAUTION
If a fixed image displays on the screen for a
yy
long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is “image burn” or “burn-in” and
not covered by the warranty.
If the aspect ratio is set to 4:3 for a long
yy
period of time, image burn may occur on
the letterboxed area of the screen.
- 16:9 : The following selection will allow you
to adjust the picture horizontally, in linear
proportion, to fill the entire screen(useful for
viewing 4:3 formatted DVDs).
- Just Scan : Following Selection will lead to you
view the picture of best quality without loss of
original picture in high resolution image. Note: If
there is noise in original Picture, You can see the
noise at the edge.
Just Scan
- Original : The aspect ratio is not adjusted from
the original. It is set by the program being
watched.
Original
- 4:3 : The following selection will allow you to
view a picture with an original 4:3 aspect ratio,
gray bars will appear on both the left and right of
the screen.
- 1:1 : The aspect ratio is not adjusted from the
original. (Only HDMI/DVI PC, RGB PC)
- 14:9 : You can view a picture format of 14:9 or a
general Monitor set program in the 14:9 mode. The
14:9 screen is viewed in the same way as in 4:3,
but is magnified to the left and right.
19
CUSTOMIZING SETTINGS
- Cinema Zoom 1 : Choose Cinema Zoom
when you want to enlarge the picture in correct
proportion. Note: When enlarging or reducing
the picture, the image may become distorted.
- Full Wide : When Monitor set receives the wide
screen signal,it will lead you to adjust the picture
horizontally or vertically, in a linear proportion,to
fill the entire screen fully. Full Wide
MODE
AV
Component
DTV
PC
PC
16:9
o
o
o
o
o
Just Scan
x
o
o
x
x
Original
o
x
x
x
x
4:3
o
o
o
o
o
1:1
x
x
x
o
o
14:9
o
o
o
x
x
Zoom
o
o
o
x
x
Cinema Zoom 1
o
o
o
x
x
Full Wide
o
x
x
x
x
ARC
HDMI/DVI
RGB
ENG
ENGLISH
- Zoom : The following selection will allow you
to view the picture without any alteration, while
filling the entire screen. However, the top and
bottom of the picture will be cropped.
20
CUSTOMIZING SETTINGS
AUDIO settings
ENGLISH
ENG
AUDIO
Move
1 Press MENU to access the main menus.
Auto
Auto Volume
Volume Off
:: Off
Clear Voice II : Off
2 Press the Navigation buttons to scroll to AUDIO and press
• Level OK.
3 Press the Navigation buttons to scroll to the setting or
option you want and press OK.
Balance OK
3
0
Sound Mode : Standard
• Treble 50
• Bass 50
Speaker : On
• Reset
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available audio options are described in the following:
Setting
Description
Auto Volume
To adjust uneven sound volumes across all channels or signals automatically to the most
appropriate level. To use this feature, select On.
Clear Voice ll
By differentiating the human sound range from others,it helps users listen to human voices better.
Balance
Adjusts balance between the left and right speakers according to your room environment.
Sound Mode
Selects one of the preset sound modes or customize each option in each mode.
Mode
Speaker
Standard
Select when you want standard-quality sound.
Music
Select when you listen to music.
Cinema
Select when you watch movies.
Sport
Select when you watch sports events.
Game
Select when you watch game events.
ON: Enables sound to the monitor speaker. (* The monitor speaker is sold separately.)
OFF: Disables sound to the monitor speaker. Use this option when using an external sound device.
21
CUSTOMIZING SETTINGS
TIME settings
TIME
2 Press the Navigation buttons to scroll to TIME and press
OK.
3 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
OK
: −− : −− −−−−
Off Time : Off
On Time : Off
Sleep Timer : Off
Auto Off
: On
Power On Delay : Off
Automatic Standby : On(4hours)
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available time settings are described in the following:
Setting
Description
Clock
Sets the time feature.
On/Off Time
Sets the time to turn on or off the Monitor set.
Sleep Timer
Sets the length of time until the Monitor set to turns off. When you turn the Monitor set off and
turn it on again, the Sleep Timer will be set to off.
Auto off
If Auto off is active and there is no input signal, the set switches to off mode automatically after
15 minutes.
Power on delay
When connecting multiple monitors and turning the power on, the monitors are turned on
individually to prevent overload.
Automatic Standby If you do not use the monitor for more than 4 hours, it will be in standby mode automatically.
NOTE
y yOnce the on or off time is set, these functions operate daily at the preset time.
y yThe scheduled power-off function works properly only when the device time is set correctly.
y yWhen the scheduled power-on and power-off times are the same, the power-off time has priority over the
power-on time if the set is turned on, and vice versa if the set is turned off.
The 'Automatic Standby' function may not be available depending on the country.
yy
ENG
ENGLISH
Clock Clock
1 Press MENU to access the main menus.
Move
22
CUSTOMIZING SETTINGS
OPTION settings
OPTION
Move
ENGLISH
ENG
1 Press MENU to access the main menus.
Language
Input Label
English
:: English
2 Press the Navigation buttons to scroll to OPTION and press
Key Lock : Off
Set ID
: Off
ISM Method : Normal
DPM Select
: On
Power Indicator : ­ON
Interface Select
: RS232C
OK.
3 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
OK
Network Setup
-To return to the previous level, press BACK.
Information
Factory Reset
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Language
To choose the language in which the control names are displayed.
Input Label
Selects a label for an input source to identify a device connected to each input source.
NOTE
y yIf you want to use HDMI-PC mode, you must set the input label to PC mode.
Key Lock
Use the buttons to select On or Off. The monitor can be set up so that it can only be used with the
remote control. This feature can prevent unauthorized viewing.
In order to lock the OSD screen adjustment, set the Key Lock tab to the 'On' position.
In order to unlock it, do the following :
Push the MENU button on the remote control and set Key Lock to the 'Off' position.
Set ID
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 99) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
* If Set ID is set to Off, you cannot control RS-232C functions.
To use RS-232C, Set ID must be set to a value other than Off.
ISM Method
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
could result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
Normal
Leave on normal if you don't foresee image burn in being a problem.
Orbiter
May help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen,
the screen will move every 2 minutes.
Inversion
This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White wash
White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
DPM Select
A user can choose to turn the power saving mode On/ Off.
Power Indicator
Use this function to set the power indicator on the front side of the product to On or Off.
CUSTOMIZING SETTINGS
Setting
Description
Sets up network connections.
Option
Network Setup
RS-232C
Enables communication via Serial.
Network
LAN - Enables communication via Ethernet.
Option
DHCP
Allocates and sets up IP automatically.
Manual
Sets up IP address, Gateway, Subnet Mask, Primary DNS and Secondary
DNS.
The setup process is complete when you select Execute, and "IP Setup
Completed" is displayed at the bottom of the screen. While "Wait for IP Setup"
is displayed, you cannot use the local keys and remote control. "Wait for IP
Setup" is displayed for up to 40 seconds.
* If Network select is set to RS232C.DHCP and Manual are disabled.
Information
You can find informations about Serial No, F/W version, IP Address and MAC Address.
Factory Reset
Select this option to return to the default factory settings.
ENG
ENGLISH
Interface Select
23
24
CUSTOMIZING SETTINGS
TILE settings
TILE
ENGLISH
ENG
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to TILE and press
OK.
3 Press the Navigation buttons to scroll to the setting or
option you want and press OK.
Move
Tile
TileMode
Mode
:: 2x2
Off
Tile ID :0
Natural Mode
: Off
H Size
:0
V Size
:0
H Position : ­0
V Position
: ­0
OK
Reset
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available lock settings are described in the following:
Setting
Description
Tile Mode
To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to RGB Cable by distributor and RS-232C.
Tile mode and choose Tile alignment and set the ID of the current product to set location.
* Only after pressing the SET button the adjustments made to the settings will be saved.
- Tile mode : column x row ( c = 1, 2, 3, 4, 5 r = 1, 2, 3, 4, 5)
- 5 x 5 available.
- Configuration of an integration screen is also available as well as configuration of One by one
Display.
Tile ID
Select the location of the Tile by setting an ID.
Natural
The image is omitted by the distance between the screens to be naturally shown.
H-Size
Adjust the horizontal size of the screen taking into account the size of the bezel.
V-Size
Adjust the vertical size of the screen taking into account the size of the bezel.
H-Position
Moving the screen position horizontally.
V-Position
Moving the screen position vertically.
Reset
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to Full screen.
CUSTOMIZING SETTINGS
25
Tile Mode
• Off:
When the Tile Mode
option is disabled
• 2X1:
When using 2 monitors
ID 1
• 3X3:
When using 9 monitors
• 2X2:
When using 4 monitors
ID 2
ENG
ENGLISH
This monitor can be tiled with additional monitors to create a large tiled display.
ID 1
ID 2
ID 1
ID 2
ID 3
ID 3
ID 4
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
Tile ID
• 4X4:
When using 16 monitors
• 5X5:
When using 25 monitors
ID 1
ID 2
ID 3
ID 4
ID 1
ID 2
ID 3
ID 4
ID 5
ID 5
ID 6
ID 7
ID 8
ID 6
ID 7
ID 8
ID 9
ID 10
ID 9
ID 10
ID 11
ID 12
ID 11
ID 12
ID 13
ID 14
ID 15
ID 13
ID 14
ID 15
ID 16
ID 16
ID 17
ID 18
ID 19
ID 20
ID 21
ID 22
ID 23
ID 24
ID 25
Tile Mode - Natural mode
When active, the part of the image that would normally be displayed in the gap between the monitors is
omitted.
Before
After
26
ENTERTAINMENT
ENGLISH
ENG
ENTERTAINMENT
Using integrated media
features
Connecting USB storage devices
Connect USB storage devices such as a USB
flash memory, external hard drive, or MP3 player
to the Monitor set and use multimedia features
(“Browsing files” See p.27).
Connect a USB flash memory or USB memory
card reader to the Monitor set as shown on the
following illustration. The USB screen appears.
or
To disconnect a USB storage device,
make sure to end the connection properly to
prevent damages to the Monitor set or files.
CAUTION
Do not turn the Monitor set off or remove a
yy
USB storage device while the USB storage
device is connected to the Monitor set, as
this could result in loss of files or damage to
the USB storage device.
Back up your files saved on a USB storage
yy
device frequently, as you may lose or
damage the files and this may be not
covered by the warranty.
Precautions when using the USB device
Only a USB storage device is recognizable.
yy
If the USB storage device is connected
yy
through a USB hub, the device is not
recognizable.
A USB storage device using an automatic
yy
recognition program may not be recognized.
A USB storage device which uses its own
yy
driver may not be recognized.
The recognition speed of a USB storage
yy
device may depend on each device.
Please do not turn off the Set or unplug
yy
the USB device when the connected USB
storage device is working. When such device
is suddenly separated or unplugged, the
stored files or the USB storage device may
be damaged.
Please do not connect the USB storage
yy
device which was artificially maneuvered on
the PC. The device may cause the product to
malfunction or fail to be played. Never forget
to use only a USB storage device which has
normal music files or image files.
Please use only a USB storage device which
yy
was formatted as a FAT16, FAT32, NTFS file
system provided with the Windows operating
system. In case of a storage device
formatted as a different utility program which
is not supported by Windows, it may not be
recognized. Data in a USB storage device
cannot be deleted in the NTFS file system.
Please connect power to a USB storage
yy
device which requires an external power
supply. If not, the device may not be
recognized.
Please connect a USB storage device with
yy
cable is offered by USB maker. If connected
with cable is not offered by USB maker or an
excessively long cable, the device may not
be recognized.
Some USB storage devices may not be
yy
supported or operated smoothly.
Maximum of 999 files and folders can be
yy
recognized.
Data in a USB storage device cannot be
yy
aligned. Up to 128 English characters can be
27
ENTERTAINMENT
Browsing files
ENG
ENGLISH
recognizedasafilename.
Pleasebackuptheimportantfilebecausea
yy
dataofUSBdevicemaybedamaged.Data
managementisconsumer'sresponsibility
andinconsequencethemanufacturesdoes
notcovertheproductbearingdatadamage.
IftheUSBisconnectedinStandbyMode,
yy
specificharddiskwillautomaticallybeloaded
whentheSetisturnedon.
Therecommendedcapacityis1TBorless
yy
foraUSBexternalharddiskand32GBor
lessforUSBmemory.
Anydevicewithmorethantherecommended
yy
capacitymaynotworkproperly.
IfaUSBexternalharddiskwitha“Power
yy
Saving”functiondoesnotwork,turnthe
harddiskoffandonagaintomakeitwork
properly.
Namesandsubtitlesofsomelanguagefiles
yy
maynotdisplayproperly.(Korean,Chinese,
Japanese)
WhenusingKoreanorChinesesubtitles
yy
orfilenames,itisrecommendedtosetthe
languagetothecorrespondingone.
AccessthePhoto,MusicorMovielistsand
browsefiles.
1 ConnectaUSBstoragedevice.
2 PressMENUtoaccessthemainmenus.
3 PresstheNavigationbuttonstoscrolltoUSB
andpressOK.
4 PresstheNavigationbuttonstoscrollto
PHOTO LIST,MUSIC LISTorMOVIE LIST
andpressOK.
PHOTO LIST
MUSIC LIST
USB
MOVIE LIST
Move
OK
Photo List
Music List
Movie List
DivX Reg.Code
Deactivation
5 SelectDrive1toaccesstheconnectedUSB
storagedevice
Photo List
USB Device
Page 1/1
USB
Drive 1
No Marked
Free Space 150 MB
Drive 1
0 folder(s), 0 file(s)
Up Folder
Navigation
Option
Page Change
Mark
Exit
28
ENTERTAINMENT
6 Select a folder you want.
Supported file format
ENGLISH
ENG
- To return to the previous level, select
Up Folder.
Photo List
Type
y y JPG
y y Available size
Baseline: 64 pixel (W) x 64 pixel (H) 15360 pixel (W) x 8640 pixel (H)
Progressive: 64 pixel (W) x 64 pixel (H) 1024 pixel (W) x 768 pixel (H)
Music
y y MP3
y y Bit rate range 32 Kbps to 320 Kbps
y y Sampling rate (Sampling Frequency)
MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHz
* A copy-protected file will not play.
Video
y y MPEG1, MPEG2, MPEG4(Doesn't
support Microsoft MPEG 4-V2, V3),
DivX 3.xx, DivX 4.xx, DivX 5.xx, DivX
VOD(DRM), XviD, DivX 6.xx(Playback)
y y Audio format: Mpeg, Mp3, PCM
y y Sampling frequency: within 32k to 48khz
y y Bit rate of audio format: within 32k to
320kbps
y y Supported subtitle format: *.smi, *.srt,
*.sub (MicroDVD, SubViewer 2.0), *.ass,
*.ssa, *.txt (DVD Subtitle System)
USB Device
Page 1/1
USB
Drive 1
No Marked
Free Space 150 MB
HR101
HR102
HR103
HR104
HR105
0 folder(s), 0 file(s)
Up Folder
Navigation
Page Change
Option
Exit
Mark
7 Press the Navigation buttons to browse files.
The highlighted file will display in the preview
window.
1
Photo List
Page 2/3
Drive 1
JMJ001
3
4
5
6
7
Up Folder
Free Space 150 MB
HR103
02/21/2010
HR101
02/21/2010
HR104
02/21/2010
HR102
02/21/2010
HR105
02/21/2010
JHR001
02/21/2010
JHR005
02/21/2010
JHR002
02/21/2010
JHR006
02/21/2010
JHR003
02/21/2010
JHR007
02/21/2010
JHR004
02/21/2010
JHR008
02/21/2010
Option
No.
1
2
3
4
5
6
7
USB Device
No Marked
Up Folder
1366x768, 125KB
Navigation
2
Page Change
MARK
Mark
EXIT
Exit
Description
Current page number/total number of pages
The number of selected files
File and Folder name
Preview window
File size, information.
Return to the previous level
Available buttons on the remote control
Supported file format
Photo
ENTERTAINMENT
Viewing Photos
29
Using photo options
Use the following options while viewing photos.
1 Press the Navigation buttons to scroll to USB
and press OK.
2 Press the Navigation buttons to scroll to Photo
List and press OK.
◄
3 Press the Navigation buttons to select Drive1
Slideshow ◘
to access the connected USB storage device.
5 Press the Navigation buttons to scroll to a file
you want and press OK.
Option
Up Folder
Option
HR103
02/21/2010
HR104
1366x768, 125KB
HR105
02/21/2010
HR101
02/21/2010
HR102
02/21/2010
JHR001
02/21/2010
JHR005
02/21/2010
JHR002
02/21/2010
JHR006
02/21/2010
JHR003
02/21/2010
JHR007
02/21/2010
JHR004
02/21/2010
JHR008
02/21/2010
View
Mark All
Delete
Close
Page Change
MARK
Mark
02/21/2010
EXIT
Menu
Description
Turns the background music on or off.
To set the background music folder,
select Option.
(Rotate)
NOTE
Delete
Option
Displays the selected photo in a fullscreen view.
y y Drive: Views photos saved in a
USB storage drive.
Deletes a file saved in a USB storage
device.
NOTE
You cannot delete the files saved
in a shared folder of a PC.
Close
Closes the pop-up menu.
Rotates photos clockwise (90°, 180°,
270°, 360°).
The supported photo size is limited.
You cannot rotate a photo if the
resolution of the rotated width is
larger than the supported resolution
size.
Deletes a photo.
y y Slide Speed: Selects a slideshow
speed (Fast, Medium, Slow).
y y Music Album: Selects a music folder
for the background music.
NOTE
Mark All
Selects all files or clears all of your
or Unmark selections
All
Delete
Description
BGM
Exit
6 View photos by using the following menus.
View
Hide
Starts or stops a slideshow with selected
photos.
If there are no selected photos, all
photos saved in the current folder
display during a slideshow.
To set a slideshow speed, select Option.
Free Space 150 MB
Up Folder
1366x768, 125KB
Navigation
USB Device
No Marked
Option
Slideshow
A pop-up window will appears.
Page 2/3
►
Delete
Number of selected photos
folder you want and press OK.
Drive 1
JHR001
1/17
꘤
Options
4 Press the Navigation buttons to scroll to a
Photo List
BGM ◘
You cannot change the music folder
while the background music is
playing.
Hide
Hides the option window.
To display the options, press OK.
If you press the ARC key on the remote
control after hiding the menu, you can
toggle between normal and full screen
mode.
ENG
ENGLISH
View image files saved in a USB storage device.
The displays on the screen may differ from the
model.
30
ENTERTAINMENT
Listening to Music
7 Control playback by using the following
ENGLISH
ENG
buttons.
1 Press the Navigation buttons to scroll to USB
and press OK.
Button
Description
Stops playback
2 Press the Navigation buttons to scroll to Music
Plays a music file
List and press OK.
Pauses or resumes playback
3 Select Drive1 to access the connected USB
Skips to the next file
storage device.
Skips to the previous file
4 Press the Navigation buttons to scroll to a
folder you want and press OK.
5 Press the Navigation buttons to scroll to a file
you want and press OK.
NOTE
A pop-up window will appears.
USB Device
Music List
Page 2/3
Free Space 150 MB
Title
Music
S003
Up Folder
S001
S002
S003
00:00/01:34
S004
S005
Up Folder
Navigation
No Marked
Option
Duration
4395KB 1Kbps
Play
Play with Photo
Mark All
Delete
Close
Page Change
MARK
Mark
Up Folder
03:33
04:45
01:30
02:37
01:58
EXIT
Exit
A damaged or corrupted file will not play and
yy
the duration of the file display as 00:00.
A copy-protected file will not play.
yy
If the Monitor set is not in use for some time
yy
during playback, the information box as a
screensaver will appear to prevent image
burn.
To return to the Music list screen, press OK,
yy
■ (stop) or BACK.
6 Play music by using the following menus.
Menu
Description
Play, Stop
Play, or
Play
Marked
Plays music, stops playback, or plays
the selected music file. If you play
music without selecting music files, all
of the music files saved in the current
folder will play.
The icon will appear in front of the
duration on the currently playing file.
y y Drive: Listen to music files saved in
a USB storage drive.
Play with
Photo
Displays photos during playback.
Mark All
Selects all files or clears all of your
or Unmark selections
All
Delete
Deletes a file saved in a USB storage
device.
Close
Closes the pop-up menu.
Folder name/file name
Music
S003
0:27 / 3:67
Time elapsed /Duration
ENTERTAINMENT
Viewing Movies
Movie (*.dat / *.mpg / *.mpeg / *.vob/ *.m4v /
yy
*.avi / *.divx) supporting file.
Video format: MPEG1, MPEG2,
yy
MPEG4(Doesn’t support Microsoft MPEG
4-V2, V3), DivX 3.xx, DivX 4.xx, DivX 5.xx,
DivX VOD(DRM), XviD, DivX 6.xx(Playback)
Audio format: Mpeg, Mp3, PCM
yy
Bit rate: within 32 kbps to 320 kbps (MP3)
yy
Subtitle format: *.smi / *.srt / *.sub (Micro
yy
DVD, SubViewer 2.0) / *.ass / *.ssa / *.txt (DVD
Subtitle System).
Some user-created subtitles may not work
yy
properly.
Some special characters are not supported in
yy
subtitles.
HTML tags are not supported in subtitles.
yy
Subtitles in languages other than the
yy
supported languages are not available.
Time information in an external subtitle file
yy
should be arranged in ascending order to be
played.
The screen may suffer temporary interruptions
yy
(image stoppage, faster playback, etc.) when
the audio language is changed.
A damaged movie file may not be played
yy
correctly, or some player functions may not be
usable.
Movie files produced with some encoders may
yy
not be played correctly.
If the video and audio structure of recorded
yy
file is not interleaved, either video or audio is
outputted.
HD videos with a maximum of 1920 x 1080
yy
@ 25/30P or 1280 x 720 @ 50/60P are
supported, depending on the frame.
Videos with resolutions higher than 1920 x
yy
1080 @ 25/30P or 1280 x 720 @ 50/60P may
not work properly depending on the frame.
Movie files other than the specified types and
yy
formats may not work properly.
Max bit rate of playable movie file is 20
yy
Mbps.
We do not guarantee smooth playback of
yy
profiles encoded level 4.1 or higher in H.264 /
AVC.
DTS Audio codec is not supported.
yy
Video Decoder
mpg, mpeg, vob, dat: MPEG1, MPEG2
yy
avi, divx, m4v: MPEG4 SP, MPEG4 ASP,
yy
DivX 3.xx, DviX 4.xx, DviX 5.xx, DviX 6.xx
(Playback), XviD
Audio Codec
mpg, mpeg, vob, dat, avi, divx, m4v: AC3,
yy
MPEG, MP3, PCM
Max Resolution
720 x 576 @ 25p
yy
720 x 480 @ 30p
yy
ENG
ENGLISH
Play video files on the Monitor set. Your Monitor
set displays all of the video files saved in a USB
storage device.
A movie file more than 30GB in file size is not
yy
supported for playback.
A DivX movie file and its subtitle file must be
yy
located in the same folder.
A video file name and its subtitle file name
yy
must be identical for it to be displayed.
Playing a video via a USB connection that
yy
doesn’t support high speed may not work
properly.
Files encoded with GMC (Global Motion
yy
Compensation) may not be played.
When you are watching the movie by Movie
yy
List function, you can adjust an image by
Energy Saving key on the remote control.
User setup for each image mode does not
operate.
31
32
ENTERTAINMENT
1 Press the Navigation buttons to scroll to USB
ENGLISH
ENG
and press OK.
2 Press the Navigation buttons to scroll to Movie
List and press OK.
3 Select Drive1 to access the connected USB
storage device.
4 Press the Navigation buttons to scroll to a
Option
folder you want and press OK.
5 Press the Navigation buttons to scroll to a file
Picture Size
you want and press OK.
A pop-up window will appears.
USB Device
Movie List
Page 2/3
Duration
Play
M001
Mark All
M002
Delete
01:34:15
Close
01:35:30
Mark
EXIT
M001
Option
Play or
Play
Marked
● Language
Latin 1
+0.5
15
01:30:20
Page Change
MARK
Exit
6 Play video by using the following menus.
Menu
Off
OK
M001
Up Folder
1/6
Subtitle File
● Position
1366x768, 125KB
Favorite Music
1/6
Audio Language
● Sync
Free Space 150 MB
Up Folder
640x480, 720KB
Navigation
No Marked
Title
Movie
M002
◀ Full Screen ▶
Subtitle Language
Description
Plays a movie or plays the selected
movie.
y y Drive: Views videos saved in a USB
storage drive.
Mark All
Selects all files or clears all of your
or Unmark selections.
All
Delete or
Delete
marked
Deletes a file formatted on the FAT32
file system and saved in a USB
storage device.
Close
Closes the pop-up menu.
When you select the Set Video Play.
Menu
Description
Picture
Size
Selects your desired picture format during
movie play
Subtitle
Language
or Audio
Language
Changes the Language Group of the
subtitle/audio during movie play.
Language
Selects your desired Language.
Sync
Adjusts the time synchronisation of the
subtitle from -10 secs to +10 secs by
steps of 0.5 secs during
movie play.
Position
Changes the position of the subtitle either
up or down during movie play.
ENTERTAINMENT
1 Press the Navigation button to show the
When you select the Set Video.
1 Press the Navigation button to make
appropriate adjustments. See p.9
2 Press the Navigation button to make
appropriate adjustments.
Subtitle
Language
Latin1
Support Language
Albanian, Breton, Catalan, Danish,
Dutch, English, Faeroese, Finnish,
French, Gaelic, German, Icelandic,
Irish, Italian, Norwegian, Portuguese,
Spanish and Swedish
Latin2
Albanian, Croatian, Czech, Dutch,
English, German, Hungarian, Irish,
Polish, Romanian, Slovak, Slovene
and Sorbian
Latin4
Estonian, Latvian, Lithuanian
Latin5
Albanian, Danish, Dutch, English,
Finnish, French, Gaelic, German,
Italian, Kurdish (Latin), Norwegian,
Portuguese, Spanish, Swedish and
Turkish
Cyrillic
Bulgarian, Belorussian, English,
Macedonian, Moldavian, Russian,
Serbian and Ukrainian
Greek
Greek
Hebrew
Hebrew
Chinese
Chinese
Korean
Korean
NOTE
Only the files saved in ASCII CODE is
yy
supported for the external subtitles of the
movie.
Only 500 alphabets and 500 numbers are
yy
supported for each line of the subtitle.
Only 10,000 of sync blocks can be
yy
supported within the subtitle file.
When you select the Set Audio,
1 Press the Navigation button to show the
Sound Mode, Auto Volume, Clear Voice II,
Balance.
2 Press the Navigation button to make
appropriate adjustments.
Using the remote control.
Button
ꕚꕙ
Pause (ꕘ)
Description
When playing,
repeatedly, press the REW(ꔊꔊ) button
to speed up ꔊꔊ(x2) ꔊꔊꔊ (x4)
ꔊꔊꔊꔊ(x8) ꔊꔊꔊꔊꔊ(x16) ꔊꔊꔊꔊꔊꔊ(x32) .
repeatedly, press the FF(ꔋꔋ) button
to speed up ꔋꔋ(x2) ꔋꔋꔋ (x4) ꔋꔋꔋꔋ (x8)
ꔋꔋꔋꔋꔋ(x16) ꔋꔋꔋꔋꔋꔋ(x32).
y y Pressing these buttons repeatedly
increases the fast forward/reverse
speed.
During playback, press the Pause (ꕘ)
button.
y y Still screen is displayed.
y y If no buttons are pressed on the
remote control for 10 minutes after
pausing, the Monitor set returns to
the playback state.
y y Press the Pause (ꕘ) button and
then use the FF (ꔋꔋ) button for slow
motion.
■
During playback, stops the screen.
Play (ꕖ)
Press the Play (ꕖ) button to return to
normal playback.
ENG
ENGLISH
Picture Size, Audio Language or Subtitle
Language.
33
34
ENTERTAINMENT
ENGLISH
ENG
DivX registration code
Deactivating the DivX feature
Check and register the DivX registration code of
your Monitor set so that you can rent or purchase
the latest movies at www.divx.com/vod . To play a
rented or purchased DivX file, the file’s registration
code should be same with your Monitor set’s DivX
registration code.
Deactivate all of the devices through the web
server and block devices from activating.
Delete the existing authentication information to
receive a new DivX user authentication for the
Monitor set. Once this function is executed, a DivX
user authentication is required again to see DivX
DRM files.
1 Press MENU to access the USB menus.
2 Press the Navigation button to scroll to DivX
Reg. Code and press OK.
3 View the registration code of your Monitor set.
DivX(R) Video On Demand
Your registration Code is: xxxxxxxxxx
To learn more visit www.divx.com/vod.
Close
Close
1 Press MENU to access the USB menus.
2 Press the Navigation button to scroll to
Deactivation and press OK.
3 Select Yes to confirm.
DivX(R) Video On Demand
Do you want to deactivate your device?
Yes
No
NOTE
While you are checking the registration code,
yy
some buttons may not work.
If you use the DivX registration code of
yy
another device, you cannot play the rented
or purchased DivX file. Make sure to use
the DivX registration code assigned to your
Monitor set.
The video or audio files that are not
yy
converted by the standard DivX codec may
be corrupted or not be played.
The DivX VOD code allows you to activate
yy
up to 6 devices under one account.
4 Select Close.
DivX(R) Video On Demand
This device is deactivated.
Your deactivation code is: xxxxxxxx
To learn more visit www.divx.com/vod.
Close
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
MAKING CONNECTIONS
35
MAKING CONNECTIONS
1 Find an external device you want to connect to your Monitor set shown on the following illustration.
2 Check the connection type of the external device.
3 Go to the appropriate illustration and check the connection details.
HD Receiver
HDMI - See p.36
DVI - See p.36
AV(CVBS) - See p.37
Component - See p.37
DVD
VCR
HDMI - See p.36
DVI - See p.36
AV(CVBS) - See p.37
Component - See p.37
Speaker
AV(CVBS)
- See p.37
Component
- See p.37
USB
Memory storage – See p.26
PC
HDMI - See p.13
DVI - See p.12
RGB - See p.12
LAN - See p.38
Camcorder/Camera
HDMI - See p.36
DVI - See p.36
AV(CVBS) - See p.37
Component - See p.37
Gaming device
HDMI - See p.36
AV(CVBS)
- See p.37
Component
- See p.37
NOTE
If you connect a gaming device to the Monitor set, use the cable supplied with the gaming device.
yy
ENG
ENGLISH
Connect various external devices to the ports on the Monitor set’s back panel.
36
MAKING CONNECTIONS
ENGLISH
ENG
Connecting to a HD receiver,
DVD, Camcorder, Camera,
Gaming Device or VCR player
Connect a HD receiver, DVD, or VCR player to the
Monitor set and select an appropriate input mode.
HDMI/DVI connection
Transmits the digital video signal from an external
device to the Monitor set. Connect the external
device and the Monitor set with the HDMI/DVI
cable as shown in the following illustration. To
transmit an audio signal, connect an optional audio
cable.
HDMI connection
Transmits the digital video and audio signals from
an external device to the Monitor set. Connect the
external device and the Monitor set with the HDMI
cable as shown on the following illustration.
RGB IN
RGB IN
RGB OUT
RGB OUT
HDMI Signal Cable
(not included)
NOTE
Use a High Speed HDMI™ Cable.
yy
High Speed HDMI™ Cables are tested to
yy
carry an HD signal up to 1080p and higher.
HDMI-DVI Signal Cable
(not included)
RGB IN
RGB IN
RGB OUT
RGB OUT
RCA-PC
Audio Cable
(not included)
MAKING CONNECTIONS
37
AV(CVBS) connection
Transmits the analog video and audio signals from
an external device to the Monitor set. Connect
the external device and the Monitor set with the
component cable as shown on the following
illustration. To display images by using progressive
scan, make sure to use the component cable.
Transmits the analog video and audio signals from
an external device to the Monitor set. Connect the
external device and the Monitor set with the BNC
cable as shown on the following illustration.
AV IN / OUT
IN
PC
VIDEO
AUDIO
OUT
BNC Cable
(not included)
AUDIO
(RGB/DVI)
RCA-PC
Audio Cable
(not included)
ENG
ENGLISH
Component connection
38
MAKING CONNECTIONS
Connecting to the LAN
ENGLISH
ENG
LAN connection
Connect the LAN cable and install the eZ-Net
Manager program on the CD-ROM.
For more information about the program, please
refer to eZ-Net Guide in the enclosed CD-ROM.
A Connect PC to Monitor directly.
LAN
PC
Monitor Set
B Using a router(Switch)
LAN
Switch
Monitor Set
PC
Network
C Using the Internet.
LAN
Monitor Set
Network
Network
PC
NOTE
Using LAN establishes communication
yy
between your PC and the monitor and
enables to use the OSD menus on the PC as
well as on the monitor.
MAKING CONNECTIONS
39
Daisy Chain Monitors
RGB Mode
15-pin D-Sub Signal Cable
(Max 3m)
Product 1
Product 2
Product 3
Product 4
AV(CVBS) Mode
Audio Cable
(Not included)
AV IN / OUT
IN
AV IN / OUT
AV IN / OUT
IN
AV IN / OUT
AUDIO
VIDEO
IN
OUT
VIDEO
IN
AV IN / OUT
AUDIO
VIDEO
IN
OUT
AUDIO
OUT
VIDEO
AV IN / OUT
AUDIO
IN
OUT
VIDEO
AUDIO
OUT
VIDEO
AUDIO
OUT
BNC Cable
(Not included)
Product 1
Product 2
NOTE
When multi-connecting in/out cascade format, no loss cables are recommended.
yy
We recommend that you should use cable distributor.
yy
Product 3
ENG
ENGLISH
Use this function to share the RGB video signal with other monitors without having to use a separate signal
splitter box.
• To use different products connected to each other Connect one end of the signal input cable (15-pin
D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN
connector of other products
40
TROUBLESHOOTING
ENGLISH
ENG
TROUBLESHOOTING
No image is displayed
Problem
Is the product power cord
connected?
Resolution
y y See if the power cord is properly connected to the outlet.
Is the power indicator light on? y
y
Power is on, power indicator
y
is blue but the screen appears y
extremely dark.
The power indicator amber?
y
oes the 'Out of range'
D
message appear?
oes the 'Check signal cable'
D
message appear?
y See if the power switch is turned on.
y May need service.
y Adjust brightness and contrast again.
y Backlight may need repair.
y If the product is in power saving mode, move the mouse or press any
key.
y y Turn both devices off and then back on.
y y The signal from the PC (video card) is out of the vertical or horizontal
frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI : 1920 x 1080 @ 60 Hz
y y The signal cable between PC and product is not connected. Check
the signal cable.
y y Press the 'INPUT' menu in the remote Control to check the input
signal.
'Unknown Product' message appears when the product is connected.
Problem
Did you install the driver?
Resolution
y y Install the product driver, which is provided with the product, or
download it from the web site. (http://www.lg.com)
y y See if the plug&play function is supported by referring to the video
card user manual.
TROUBLESHOOTING
41
Problem
The 'Key Lock On' message
appears when pressing the
Menu button.
Resolution
y y The Lock function prevents the OSD settings from being changed
inadvertently. To release the lock, go to Menu and Option and disable
the Key Lock option.
The screen image looks abnormal.
Problem
Resolution
Is the screen position wrong?
y y D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select the optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Position OSD
menu.
y y See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel "Display" Setting menu.
Do thin lines appear on the
y y D-Sub analog signal - Press the "AUTO" button in the remote control
background screen?
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Clock OSD
menu.
Horizontal noise appears or the y y D-Sub analog signal - Press the "AUTO" button in the remote control
characters look blurred.
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Phase OSD
menu.
The screen is displayed
y y The proper input signal is not connected to the signal port. Connect
abnormally.
the signal cable that matches with the source input signal.
After-image appears on the product.
Problem
After-image appears when the
product is turned off.
Resolution
y y If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the screen-saver function.
ENG
ENGLISH
'Key Lock On' message appears.
42
TROUBLESHOOTING
ENGLISH
ENG
The audio function does not work.
Problem
No sound?
Sound is too dull.
Sound is too low.
Resolution
y
y
y
y
y
y See if the audio cable is connected properly.
y Adjust the volume.
y See if the sound is set properly.
y Adjust the Clear Voice ll, Treble and Bass appropriately.
y Adjust the volume.
Screen color is abnormal.
Problem
Screen has poor color resolution y
(16 colors).
Screen color is unstable or
y
mono-colored.
Do black spots appear on the
y
screen?
Resolution
y Set the number of colors to more than 24 bits (true color) Select
Control Panel - Display - Settings - Color Table menu in Windows.
y Check the connection status of the signal cable. Or, re-insert the PC
video card.
y Several pixels (red, green, white or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
The operation does not work normally.
Problem
Resolution
The power suddenly turned off. y y Is the sleep timer set?
heck the power control settings. Power interrupted.
y yC
y y "CAUTION! FAN STOP!" If the power is turned off after this message appears, it means that
the fan is out of order.In this case, contact your local service center.
SPECIFICATIONS
LCD Panel
Screen Type
Video Signal
Pixel Pitch
Max. Resolution
1638.3 mm Wide (64.5 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size : 1638.3 mm
0.744 mm (H) x 0.744 mm (V)
RGB : 1920 X 1080 @ 60 Hz
HDMI/DVI : 1920 X 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution RGB : 1920 X 1080 @ 60 Hz
HDMI/DVI : 1920 X 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
Vertical Frequency
Synchronization Type
Input Connector
Power
Rated Voltage
Power Consumption
Environmental
conditions
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
RGB : 30 kHz to 83 kHz
HDMI/DVI : 30 kHz to 83 kHz
RGB : 56 Hz to 75 Hz
HDMI/DVI : 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital
15-pin D-Sub type, HDMI (digital), Composite Video,
RS-232C, LAN, USB
AC 100-240 V~ 50/60 Hz 4.6 A
On Mode : 480 W Typ.
Sleep Mode : ≤ 1 W (RGB) / 1 W (HDMI/DVI)
Off Mode : ≤ 0.5 W
0 °C to 40 °C
10 % to 80 %
-20 °C to 60 °C
5 % to 95 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
ENG
ENGLISH
SPECIFICATIONS
43
44
SPECIFICATIONS
ENGLISH
ENG
Dimensions
(Width x Height x
Depth) / Weight
H
W
D
1535.4 mm x 136.7 mm x 907.6 mm / 51.1 kg
H
W
D
1535.4 mm x 136.7 mm x 907.6 mm / 51.85 kg
* Applicable only for models that support the speakers
Audio
RMS Audio Output
Input Sensitivity
Speaker Impedance
10 W + 10 W (R + L)
0.7 Vrms
8Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
SPECIFICATIONS
45
Dimensions
ENG
ENGLISH
The illustrations in this manual may differ from the actual product and accessories.
Please see the "Installing on a wall" section for sizes of screws. ( See p.8 )
46
SPECIFICATIONS
DTV Mode
RGB (PC) supported mode
ENGLISH
ENG
Resolution
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
Resolution
Component
HDMI/DVI
(DTV)
640 x 350
31.469
70.8
480i
o
x
o
x
720 x 400
31.468
70.8
576i
640 x 480
31.469
59.94
480p
o
o
640 x 480
37.5
75
576p
o
o
800 x 600
37.879
60.317
720p
o
o
800 x 600
46.875
75
1080i
o
o
832 x 624
49.725
74.55
1080p
o
o
1024 x 768
48.363
60
1024 x 768
60.123
75.029
1280 x 720
44.772
59.855
1280 x 768
47.7
60
1360 x 768
47.72
59.799
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1280 x 1024
79.98
75.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
Power Indicator
Mode
Product
On Mode
Green
Sleep Mode
Amber
Off Mode
-
NOTE
DTV/PC selection on RGB and HDMI/DVI
yy
inputs is available for PC resolutions : 640
x 480 / 60 Hz, 1280 x 720 / 60 Hz, 1920 x
1080 / 60 Hz and DTV resolutions : 480p,
720p, 1080p.
HDMI/DVI(PC) supported mode
Resolution
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
640 x 480
31.469
59.94
800 x 600
37.879
60.317
1024 x 768
48.363
60
1280 x 720
44.772
59.855
1360 x 768
47.72
59.799
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
NOTE
Vertical frequency: To enable the user to
yy
watch the product display, screen image
should be changed tens of times every
second like a fluorescent lamp. The vertical
frequency or refresh rate is the times of
image display per second. The unit is Hz.
Horizontal frequency: The horizontal interval
yy
is the time to display one horizontal line.
When 1 is divided by the horizontal interval,
the number of horizontal lines displayed
every second can be tabulated as the
horizontal frequency. The unit is kHz.
IR CODES
47
IR CODES
Code (Hexa)
95
Function
Energy Saving (ꕊ)
08
(POWER)
Note
R/C BUTTON
R/C BUTTON (POWER ON/OFF)
0B
INPUT
R/C BUTTON
C4
Monitor On
R/C BUTTON (Discrete IR Code)
C5
Monitor Off
R/C BUTTON (Discrete IR Code)
79
ARC (MARK)
R/C BUTTON (Discrete IR Code)
43
MENU
R/C BUTTON
40
Up (ꕌ)
R/C BUTTON
41
Down (ꕍ)
R/C BUTTON
07
Left (<)
R/C BUTTON
06
Right (>)
R/C BUTTON
44
OK(ꔉ)
R/C BUTTON
28
BACK(ꕉ)
R/C BUTTON
5B
EXIT
R/C BUTTON
4D
PSM
R/C BUTTON
02
(+)
R/C BUTTON
03
(-)
R/C BUTTON
09
MUTE
R/C BUTTON
E0
Brightness ꕌ (Page UP)
R/C BUTTON
E1
Brightness ꕍ (Page Down)
R/C BUTTON
10 to 19
Number Key 0 to 9
R/C BUTTON
72
Red Key
R/C BUTTON
71
Green Key
R/C BUTTON
63
Yellow Key
R/C BUTTON
61
Blue Key
R/C BUTTON
7B
TILE
R/C BUTTON
5A
AV(CVBS)
Discrete IR Code (Input AV Selection)
BF
Component
Discrete IR Code (Input Component Selection)
D5
RGB PC
Discrete IR Code (Input RGB PC Selection)
C6
HDMI/DVI
Discrete IR Code (Input HDMI/DVI Selection)
76
ARC (4:3)
Discrete IR Code (Only 4 : 3 mode)
77
ARC (16:9)
Discrete IR Code (Only 16 : 9 mode)
AF
ARC (ZOOM)
Discrete IR Code
(Only Zoom, Cinena Zoom 1 mode)
99
Auto Config.
ꕗ
R/C BUTTON (Discrete IR Code)
B1
B0
ꕖ
R/C BUTTON
BA
ꕘ
R/C BUTTON
8F
ꕚ
R/C BUTTON
8E
ꕙ
R/C BUTTON
R/C BUTTON
ENG
ENGLISH
This feature is not available for all models.
yy
48
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
CONTROLLING THE MULTIPLE PRODUCT
Use this method to connect several products to a single PC. You can control several products at a
yy
time by connecting them to a single PC.
In the Option menu, Set ID must be between 1 and 99 without being duplicated.
yy
Connecting the cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
yy
product on/off, select an input source or adjust the OSD menu from your PC.
RS-232C Cable
(not included)
PC
Monitor Set 1
Monitor Set 2
Monitor Set 3
Monitor Set 4
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
Set
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
(Female)
PC
TXD
RXD
GND
DSR
DTR
CTS
RTS
D-Sub 9
(Female)
Communication Parameter
y
y
y
y
y
y
y
3-Wire Configurations (Not Standard)
Baud Rate : 9600 buad Rate (UART)
y
Data Length : 8 bit
y
Parity Bit : None
y
Stop Bit : 1bit
y
Flow Control : None
y
Communication Code : ASCII code
y
Use a crossed (reverse) cable
y
Set
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
(Female)
D-Sub 9
(Female)
RXD
TXD
GND
DTR
DSR
RTS
CTS
TXD
RXD
GND
DSR
DTR
CTS
RTS
CONTROLLING THE MULTIPLE PRODUCT
49
Command reference list
DATA
2
1
01. Power k
a
00H to 01H
02. Aspect Ratio k
c
01H to 1FH
03. Screen Mute
k
d
00H to 01H
04. Volume Mute k
e
00H to 01H
05. Volume Control k
f
00H to 64H
06. Contrast k
g
00H to 64H
07. Brightness k
h
00H to 64H
08. Color k
i
00H to 64H
09. Tint k
j
00H to 64H
10. Sharpness k
k
00H to 64H
11. OSD Select k
l
00H to 01H
12. Remote Lock/ key Lock
k
m
00H to 01H
13. Balance k
t
00H to 64H
14. Color Temperature k
u
00H to 02H
15. Abnomal state k
z
FFH
16. ISM mode j
p
01H to 08H
17. Auto configuration
j
u
01H
2
3
18. Key
m
c
Key Code
19. Tile Mode d
d
00H to 55H
20. Tile H Position d
e
00H to 14H
21. Tile V Position d
f
00H to 14H
22. Tile H Size d
g
00H to 64H
23. Tile V Size d
h
00H to 64H
24. Tile ID Set
d
i
00H to 19H
25. Natural Mode (In Tile mode)
d
j
00H to 01H
26. Picture mode (PSM) d
x
00H to 06H
27. Sound mode d
y
00H to 05H
28. Fan Fault check d
w
FFH
29. Elapsed time return d
l
FFH
30. Temperature value d
n
FFH
31. Lamp fault check d
p
FFH
32. Auto Volume d
u
00H to 01H
33. Speaker d
v
00H to 01H
34. Time f
a
00H to 06H
00H to 17H
00H to 3BH
35. On Timer (On/Off Timer) Time f
d
F1H to F4H
E0H to E4H
01H to 80H
00H to 17H
00H to 3BH
36. Off Timer (On/Off Timer) Time
f
e
F1H to F4H
E0H to E4H
01H to 80H
00H to 17H
00H to 3BH
37. Scheduling input select
f
u
F1H to F4H
02H to 09H
38. Sleep Time f
f
00H to 08H
ENG
ENGLISH
COMMAND
1
50
CONTROLLING THE MULTIPLE PRODUCT
COMMAND
DATA
ENGLISH
ENG
1
2
1
39. Auto Sleep f
g
00H to 01H
40. Power On Delay
f
h
00H to 64H
41. Language f
i
00H to 09H
42. DPM Select f
j
00H to 01H
43. Reset f
k
00H to 02H
44. Power Saving f
l
00H to 03H
45. Power Indicator f
o
00H to 01H
46. Serial no. f
y
FFH
47. S / W Version
f
z
FFH
48. Input Select x
b
20H to A0H
2
3
Note : During USB operations such as Dvix or EMF, all commands except Power(ka) and Key(mc) are
yy
not executed and treated as NG.
CONTROLLING THE MULTIPLE PRODUCT
51
Transmission / Receiving protocol
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1]: First command. (k, j, m, d, f, x)
* [Command 2]: Second command.(a to u)
* [Set ID]: Set up the Set ID number of product.
range : 01H to 63H. by setting '0', server can control all products.
* In case of operating with more than 2 sets using set ID as '0' at the same time, it should not be checked the ack
message. Because all sets will send the ack message, so it's impossible the check the whole ack messages.
* [DATA]: To transmit command data.
Transmit 'FF' data to read status of command.
* [Cr]: Carriage Return (ASCII code '0 x 0 D')
* [ ]: ASCII code Space (0 x 20)
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of
the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* If there is error, it returns NG
ENG
ENGLISH
Transmission
52
CONTROLLING THE MULTIPLE PRODUCT
01. Power (Command: k a)
To control Power On/Off of the set.
ENGLISH
ENG
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
Data 01 : Power On
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
To show the status of Power On/Off.
03. Screen Mute (Command: k d)
To select screen mute on / off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on)
01 : Screen mute on (Picture off)
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Data 00 : Power Off
Data 01 : Power On
02. Aspect Ratio (Command: k c)
To adjust the screen format.
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in
the Screen menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 01 : Normal Screen (4 : 3)
02 : Wide Scran (16 : 9)
04 : Zoom (AV(CVBS),Component,HDMI-DTV)
06 : Original (AV(CVBS))
07 : 14 : 9 (AV(CVBS),Component,HDMI-DTV)
09 : Just Scan (HD DTV) * When the RGB, HDMI - PC mode (1:1)
10 to 1F : Cinema Zoom 1 to 16
(AV(CVBS),Component,HDMI-DTV)
B : Full Wide (AV(CVBS))
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
04. Volume Mute (Command: k e)
To control On/Off of the Volume Mute.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume Mute On (Volume Off)
01 : Volume Mute Off (Volume On)
Acknowledgement [e][ ][Set ID][ ][OK][Data][x]
Data 00 : Volume Mute On (Volume Off)
01 : Volume Mute Off (Volume On)
CONTROLLING THE MULTIPLE PRODUCT
05. Volume Control (Command: k f)
To adjust Volume.
Data Min : 00H to Max : 64H
(Hexadecimal code)
Acknowledgement [f][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
* Real data mapping
0 : STEP 0
:
A : STEP 10
:
F : STEP 15
10 : STEP 16
:
64 : STEP 100
06. Contrast (Command: k g)
To adjust screen contrast.
You can also adjust the contrast in the Picture menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
Acknowledgement [g][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
* Refer to 'Real data mapping ’. See p.53
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping ’. See p.53
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
09. Tint (Command: k j)
To adjust the screen tint.
You can also adjust the tint in the Picture menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
00H : Step R50
64H : Step G50
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
* Tint Real data mapping
0 : Step 0 to Red
:
64 : Step 100 to Green
07. Brightness (Command: k h)
To adjust screen brightness.
You can also adjust the brightness in the Picture
menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping ’. See p.53
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
* Refer to 'Real data mapping ’. See p.53
10. Sharpness (Command: k k) (Video input only)
To adjust the screen Sharpness.
You can also adjust the sharpness in the Picture
menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping ’. See p.53
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
ENG
ENGLISH
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
08. Color (Command: k i) (Video Timing only)
To adjust the screen color.
You can also adjust the color in the Picture menu.
53
54
CONTROLLING THE MULTIPLE PRODUCT
11. OSD Select (Command: k l)
To control OSD on/off to the set.
ENGLISH
ENG
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD Off
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 01: OSD On
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data 00: OSD Off
14. Color Temperature (Command: k u)
To adjust the screen color temperature.
Data 01: OSD On
Data 00 : Medium
01 : Cool
02 : Warm
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Data 00 : Medium
01 : Cool
02 : Warm
12. Remote Lock /Key Lock (Command: k m)
To control Remote Lock on/off to the set.
This function, when controlling RS-232C, locks the
remote control and the local keys.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 00: Off
Data 01: On
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
Data 00: Off
Data 01: On
13. Balance (Command: k t)
To adjust the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
00H : Step L50
64H : Step R50
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
(Hexadecimal code)
00H : Step 0 to L50
64H : Step 100 to R50
* Balance : L50 to R50
15. Abnormal state (Command: k z)
Used to Read the power off status when Stand-by
mode.
Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Data FF : Read
Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
Data 00 : Normal (Power on and signal exist)
01 : No signal (Power on)
02 : Turn the monitor off by remote control
03 : Turn the monitor off by sleep time function
04 : Turn the monitor off by RS-232C function
08 : Turn the monitor off by off time function
09 : Turn the monitor off by auto off function
16. ISM mode (Command: j p)
Used to select the afterimage preventing function.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data 01 : Inversion
02 : Orbiter
04 : White Wash
08 : Normal
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
00H : Step -10(Left)
14H : Step 10(Right)
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
18. Key (Command: m c)
To send IR remote key code.
21. Tile V Position (Command: d f)
To set the Vertical position.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
Data Key code : Refer to ‘IR CODES’. See p.47
Data Min : 00H to Max : 14H
00H : Step -10(Down)
14H : Step 10(Up)
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
19. Tile Mode (Command: d d)
Change a Tile Mode.
22. Tile H Size (Command: d g)
To set the Horizontal size.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Transmission
[d][g][ ][Set ID][ ][Data][x]
Data
Description
00 or 11
12
13
14
Tile mode is off.
1 x 2 mode (column x row)
1 x 3 mode
1 x 4 mode
...
1 x 2 mode
55
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 14H
Data 01 : To set
...
20. Tile H Position (Command: d e)
To set the Horizontal position.
* The data can not be set to 0X or X0 except 00.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
Data Min : 00H to Max : 64H
* Refer to 'Real data mapping ’. See p.53
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
17. Auto Configure (Command: j u)
To adjust picture position and minimize image
shaking.
Automatically. NB : Only applies to RGB(PC) mode.
55
56
CONTROLLING THE MULTIPLE PRODUCT
23. Tile V Size (Command: d h)
To set the Vertical size.
ENGLISH
ENG
Transmission
[d][h][ ][Set ID][ ][Data][x]
Data Min : 00H to Max : 64H
* Refer to 'Real data mapping ’. See p.53
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
26. Picture Mode (Command: d x)
To adjust the picture mode.
Transmission
[d][x][ ][Set ID][ ][Data][x]
Data Structure
Data(Hex)
Mode
00
01
02
03
04
05
06
Vivid
Standard
Cinema
Sport
Game
Export 1
Export 2
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
24. Tile ID Set (Command: d i)
To assign the Tile ID for Tiling function.
Transmission
[d][i][ ][Set ID][ ][Data][x]
Data Min : 00H to Max : 19H
(Hexadecimal code)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
27. Sound Mode (Command: d y)
To adjust the Sound mode.
Transmission
[d][y][ ][Set ID][ ][Data][x]
Data Structure
Data(Hex)
Mode
01
02
03
04
05
Standard
Music
Cinema
Sport
Game
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
25. Natural Mode (Command: d j)
To assign the Tile Natural mode for Tiling function.
Transmission
[d][j][ ][Set ID][ ][Data][x]
Data 00 : Natural Off
01 : Natural On
ff : Read Status
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
28. Fan Fault check (Command: d w)
To check the Fan fault of the Set.
Transmission
[d][w][ ][Set ID][ ][Data][x]
* The data is always FF (in Hex).
Data ff : Read Status
Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x]
* Data is the status value of the Fan fault.
Data 00 : Fan fault
01 : Fan Ok
02 : N/A (Not Avaliable)
CONTROLLING THE MULTIPLE PRODUCT
29. Elapsed time return (Command: d l)
To read the elapsed time.
* The data is always FF(in Hex).
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
32. Auto volume (Command: d u)
Automatically adjust the volume level.
Transmission
[d][u][ ][Set ID][ ][Data][x]
Data 00: Off
Data 01: On
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
* The data is always FF(in Hex).
(Hexadecimal code)
30. Temperature value (Command: d n)
To read the inside temperature value.
Transmission
[d][n][ ][Set ID][ ][Data][x]
* The data is always FF(in Hex).
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
33. Speaker (Command: d v)
Turn the speaker on or off.
Transmission
[d][v][ ][Set ID][ ][Data][x]
Data 00: Off
Data 01: On
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x
* The data is 1 byte long in Hexadecimal.
31. Lamp fault Check (Command: d p)
To check lamp fault.
Transmission
[d][p][ ][Set ID][ ][Data][x]
* The data is always FF(in Hex).
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
* The data is 1 byte long in Hexadecimal.
Data 00 : Lamp Fault
01 : Lamp Ok
02 : N/A (DPM/Power Off)
34. Time (Command: f a)
Set the current time.
Transmission
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[Data1]
00 : Monday
01 : Tuesday
02 : Wednesday
03 : Thursday
04 : Friday
05 : Saturday
06 : Sunday
[Data2]
0H to 17H (Hours)
[Data3]
00H to 3BH (Minutes)
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
*When reading data, FFH is inputted for [Data1],
[Data2] and [Data3]. In other cases, all are treated as
NG.
ENG
ENGLISH
Transmission
[d][l][ ][Set ID][ ][Data][x]
57
58
CONTROLLING THE MULTIPLE PRODUCT
35. On Timer (On/Off Timer) Time (Command: f d)
Set On Timer.
ENGLISH
ENG
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
36. Off Timer (On/Off Timer) Time (Command: f e)
Set Off Timer.
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[Data1]
1. f1h to f4h(read one index) f1: read 1st index of On Time List
f2: read 2nd index of On Time List f3: read 3rd index of On Time List f4: read 4th index of On Time List
[Data 1]
1. f1h to f4h(read one index) f1: read 1st index of Off Time List, f2: read 2nd index of Off Time List f3: read 3rd index of Off Time List f4: read 4th index of Off Time List 2. e1h~e4h(delete one index), e0h(delete all indexes)
e0: delete all indexes of On Time List
e1: delete 1st index of On Time List
e2: delete 2nd index of On Time List
e3: delete 3rd index of On Time List
e4: delete 4th index of On Time List
2. e1h to e4h(delete one index), e0h(delete all
indexes)
e0: delete all indexes of Off Time List
e1: delete 1st index of Off Time List
e2: delete 2nd index of Off Time List
e3: delete 3rd index of Off Time List
e4: delete 4th index of Off Time List
3. 01h to 80h (write) (Day of Week)
bit0 (01h) : Monday
bit1 (02h) : Tuesday
bit2 (04h) : Wednesday
bit3 (08h) : Thursday
bit4 (10h) : Friday
bit5 (20h) : Saturday
bit6 (40h) : Sunday
bit7 (80h) : Everyday
(1fh) : Monday to Friday
(3fh) : Monday to Saturday
(60h) : Saturday to Sunday
[Data 2]
00h to 17h (Hours)
[Data 3]
00h to 3bh (Minutes)
*When you read/delete the current on time list, all of
[Data2][Data3] are have to be FFH.
(ex1: fd 01 f1 ff ff - when you read 1st index of On
Time List
ex2: fd 01 e1 ff ff - when you delete 1st index of On
Time List
ex3: fd 01 3f 02 03 - when you write one On Time
Data, "Monday to Saturday, 02:03"
Acknowledgement
[d][ ][Set ID][ ][OK][Data1][Data2][Data3][x]
3. 01h to 80h (write) (Day of Week)
bit0 (01h) : Monday
bit1 (02h) : Tuesday
bit2 (04h) : Wednesday
bit3 (08h) : Thursday
bit4 (10h) : Friday
bit5 (20h) : Saturday
bit6 (40h) : Sunday
bit7 (80h) : Everyday
(1fh) : Monday to Friday
(3fh) : Monday to Saturday
(60h) : Saturday to Sunday
[Data 2]
00h to 17h (Hours)
[Data 3]
00h to 3bh (Minutes)
*When you read/delete the current on time list, all of
[Data2][Data3] are have to be FFH.
(ex1: fd 01 f1 ff ff - when you read 1st index of Off
Time List
ex2: fd 01 e1 ff ff - when you delete 1st index of Off
Time List
ex3: fd 01 3f 02 03 - when you write one Off Time
Data, "Monday to Saturday, 02:03")
Acknowledgement
[e][ ][Set ID][ ][OK][Data1][Data2][Data3][x]
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[f][u][ ][Set ID][ ][Data1][ ][Data2][Cr]
[Data 1]
1. f1h to f4h(write/read one index) f1: read 1st index of Scheduling Input f2: read 2nd index of Scheduling Input f3: read 3rd index of Scheduling Input f4: read 4th index of Scheduling Input [Data 2]
Input
Data(Hex)
Input
02
04
07
08
09
AV(CVBS)
Component
RGB - PC
HDMI/DVI - HD - DVD
HDMI/DVI - PC
38. Sleep Time (Command: f f)
Set Sleep Time.
Transmission
[f][f][ ][Set ID][ ][Data][Cr]
Data 00 : Off
01 : 10
02 : 20
03 : 30
04 : 60
05 : 90
06 : 120
07 : 180
08 : 240
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
*When you read/delete the current Scheduling Input,
[Data2] needs to be FFH.
(ex1: fu 01 f1 ff - when you read 1st index of
Scheduling Input.
ex2: fu 01 f3 02 - when you write one Scheduling
Input Data in to 3rd index, "AV(CVBS)")
Acknowledgement
[u][ ][Set ID][ ][OK][Data1][Data2][x]
39. Auto Sleep (Command: f g)
Set Auto Sleep.
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
Data 00 : Off
01 : On
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
40. Power On Delay (Command: f h)
Set the schedule delay when the power is turned on
(Unit: second).
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data : 00H to 64H (Data value)
* Refer to 'Real data mapping ’. See p.53
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
37. Scheduling Input select (Command: f u) (Main
Picture Input)
To select input source for Set depending on day.
59
60
CONTROLLING THE MULTIPLE PRODUCT
41. Language (Command: f i)
Set the OSD language.
ENGLISH
ENG
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Data 00 : English
01 : French
02 : German
03 : Spanish
04 : Italian
05 : Portuguese
06 : Chinese
07 : Japanese
08 : Korean
09 : Russian
44. Power saving (Command: f l)
To set the Power saving mode.
Transmission
[f][l][ ][Set ID][ ][Data][Cr]
Data 00 : Off
01 : static level 1
02 : static level 2
03 : static level 3
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
42. DPM Select (Command: f j)
Set the DPM (Display Power Management) function.
Transmission
[f][j][ ][Set ID][ ][Data][Cr]
Data 00 : Off
01 : On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
43. Reset (Command: f k)
Set the DPM (Display Power Management) function.
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data 00 : Picture Reset
01 : Screen Reset
02 : Factory Reset
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
45. Power Indicator (Command: f o)
To set the LED for Power Indicator
Transmission
[f][o][ ][Set ID][ ][Data][Cr]
Data 00 : Off
01 : On
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
46. Serial no.Check (Command: f y)
Check the Serial no.
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data FF (to read the serial numbers)
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data1] to [Data13][x]
* The data format is ASCII Code.
CONTROLLING THE MULTIPLE PRODUCT
61
47. S/W Version (Command: f z)
Check the software version.
Data FFH : Read
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
48. Input Select (Command: x b)
To select input source for the Set.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data 20H : AV(CVBS)
40H : Component
60H : RGB(PC)
90H : HDMI/DVI(DTV)
A0H : HDMI/DVI(PC)
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
Data 20H : AV(CVBS)
40H : Component
60H : RGB(PC)
90H : HDMI/DVI(DTV)
A0H : HDMI/DVI(PC)
ENG
ENGLISH
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
Temporary noise is normal when powering ON or
OFF this device.
Download PDF

advertising