LG | 72WX70MF | LG 72WX70MF-B Owner’s Manual

OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating the your set and
retain it for future reference.
MONITOR SIGNAGE MODELS
72WX70MF
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
3LICENSES
31
- DivX® VOD Guide
32
- Using PIP/PBP
4
34 CUSTOMIZING SETTINGS
ASSEMBLING AND
PREPARING
4Accessories
5
Parts and Buttons
6
Portrait Layout
6
Pemnut Not to be Used
7
REMOTE CONTROL
9
USING THE MONITOR
9
Connecting to a PC
10
- RGB Connection
10
- DVI-D Connection
11
- HDMI Connection
11
- Display Port Connection
12
Adjusting the Screen
12
- Selecting an Image Mode
12
- Customizing Image Options
13
- Customizing PC Display Options
13
Adjusting the Sound
13
- Selecting an Sound Mode
14
- Customizing Sound Options
14
Using Additional Options
14
- Adjusting Aspect Ratio
16
- Using the Input List
17ENTERTAINMENT
17
- Connecting to a Wired Network
18
- Network Status
19
- Connecting USB Storage Devices
20
- Browsing Files
21
- Viewing Movies
25
- Viewing Photos
28
- Listening to Music
30
- Viewing the Contents List
34
Accessing Main Menus
35
- PICTURE Settings
38
- AUDIO Settings
39
- TIME Settings
40
- OPTION Settings
45
- NETWORK Settings
46 MAKING CONNECTIONS
47
External Device Connection
47
- HDMI Connection
47
- Component Connection
48
- AV (CVBS) Connection
48
Connecting to a USB
49
Connecting to the LAN
49
- LAN Connection
50
Daisy Chain Monitors
51TROUBLESHOOTING
54SPECIFICATIONS
57 IR CODES
58 CONTROLLING THE MULTIPLE
PRODUCT
58
Connecting the Cable
58
RS-232C Configurations
58
Communication Parameter
59
Command reference list
61
Transmission / Receiving protocol
LICENSES
3
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
This DivX Certified® device has passed rigorous testing to ensure it plays
DivX® video. To play purchased DivX movies, first register your device at vod.
divx.com. Find your registration code in the DivX VOD section of your device
setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium
content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and
are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274.
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
NOTE
The warranty will not cover any damages caused by using the product in an excessively dusty
yy
environment.
ENGLISH
LICENSES
4
ASSEMBLING AND PREPARING
ENGLISH
ENG
ASSEMBLING AND PREPARING
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
POWER
ENERGY
MONITOR
INPUT
OFF
ON
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
ARC
PSM
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
BACK
TILE
S.MENU
OK
EXIT
ID
ON
OFF
Remote Control and Batteries
CD (Owner's Manual) / Cards
Power Cord
* The power cord may not be provided
depending on the region you purchased
the product.
IR Expansion PCB
D-sub 15-Pin Signal Cable
CAUTION
Do not use any pirated items to ensure the safety and product life span.
yy
Any damages or injuries by using pirated items are not covered by the warranty.
yy
NOTE
The accessories provided with your product may vary depending on the model or region.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.
SuperSign Software & Manual
yy
- Downloading from the LG Electronics website.
- Visit the LG Electronics website (www.lgecommercial.com/supersign) and download the latest
software for your model.
ASSEMBLING AND PREPARING
5
Parts and Buttons
ENG
ENGLISH
Illuminance sensor/
IR Receiver
Power Indicator
USB IN
DP IN
DVI IN
RS-232C IN
RS-232C OUT
DVI OUT
RGB/AV
/COMPONENT IN
AUDIO IN
LAN
SPEAKER
EXT IR IN
Connection Panel
Connection panel
Screen Marks
Description
IR Receiver
This is where the unit receives signals from the remote control.
Power Indicator
This Indicator lights up red when the display operates normally(on mode). If the display
In sleep mode (In Power Saving mode), this indicator color changes to amber.
Illuminance sensor
Adjusts the screen brightness by measuring the amount of light.
NOTE
You can set the Power indicator to on or off by selecting OPTION in the main menu.
yy
6
ASSEMBLING AND PREPARING
Portrait Layout
ENGLISH
ENG
When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen).
Pemnut Not to be Used
If you use pemnut arbitrarily, the product may be damaged.
Back of the Product
Pemnut
REMOTE CONTROL
7
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the Monitor correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this
yy
may damage the remote control.
Make sure to point the remote control at the
yy
remote control sensor on the Monitor.
ENERGY SAVING
Adjusts the brightness of
the screen to reduce energy
consumption.
(POWER)
Turns the Monitor on or off.
MONITOR ON / OFF
Turn off the monitor and then
turn it back on.
1/a/A Button
This button selection is not
applicable.
ARC
Selects the Aspect Ratio Mode.
MARK
Selects a specific file in the USB
mode.
POWER
ENERGY
MONITOR
OFF
ON
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
Number and Alphabet Buttons
Enters numbers.
The alphabet selection is not
applicable.
DEF
MNO
WXYZ
CLEAR
This button selection is not
applicable.
MARK
Volume Up / Down
Adjusts the volume level.
ARC
PSM
PSM
Selects the Picture Status
Mode.
INPUT
Selects the input mode.
INPUT
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
MUTE
Mutes all sounds.
OK
S.MENU
BRIGHTNESS Key
Adjust the brightness by
pressing the Up and Down
buttons on the remote control.
In USB mode, the OSD menu
has the Page function to move
to the next file list.
ENG
ENGLISH
REMOTE CONTROL
8
REMOTE CONTROL
ENGLISH
ENG
POWER
ENERGY
MONITOR
MENU
Accesses the main menus
or saves your input and exit
menus.
INPUT
OFF
ON
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
ARC
Navigation Buttons
Scrolls through menus or
options.
PSM
OK
Selects menus or options and
confirms your input.
AUTO
S.MENU
S.MENU
(SuperSign Menu Key)
This button selection is not
applicable.
OK
BACK
TILE
ID
ON
ID ON/OFF
When more than one monitor
is present in the same room,
this allows you to control them
individually.
E
MUTE
MENU
BACK
Allows the user to move back
one step.
P
BRIGHT A
NESS G
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)
OFF
EXIT
EXIT
Clears all on-screen displays
and returns to Monitor
viewing from any menu.
TILE
Selects the TILE Mode.
USB Menu Control Buttons
Controls media playback.
USING THE MONITOR
Connecting to a PC
Your Monitor supports the Plug & Play* feature.
* Plug & Play: This is the function that allows a PC
to use the monitor without installing a driver.
NOTE
It is recommended to use the Monitor with
yy
the HDMI connection for the best image
quality.
Use a shielded signal interface cable, such
yy
as D-sub 15-pin signal cable and DVI cable,
with a ferrite core to maintain standard
compliance for the product.
If you turn the monitor on when the set
yy
becomes cold, the screen may flicker. This
is normal.
Some red, green, or blue spots may appear
yy
on the screen. This is normal.
CAUTION
yyConnect the signal
input cable and tighten
it by turning the screws
clockwise.
yyD o n o t p r e s s t h e
screen with your finger for a long time as
this may result in temporary distortion on the
screen.
Avoid displaying a fixed image on the screen
yy
for a long period of time to prevent image
burn. Use a screensaver if possible.
ENG
ENGLISH
USING THE MONITOR
9
10
USING THE MONITOR
ENGLISH
ENG
RGB Connection
DVI-D Connection
Transmits the analog video signal from your PC to
the monitor. Connect the PC and the monitor
set with the 15-pin signal cable as shown the
following illustrations.
Select RGB input source on the monitor.
Transmits the digital video signal from your PC to
the monitor. Connect the PC and the monitor
set with the DVI cable as shown the following
illustrations.
Select DVI-D input source on the monitor.
Back of the Product
RGB/AV
RGB/AV
/COMPONENT
IN
/COMPONENT
IN
Back of the Product
AUDIO
AUDIO
IN IN
DVI IN
DVI IN
AUDIO
AUDIO
IN IN
(not included)
(not included)
Macintosh
Adapter
(not included)
PC/MAC
PC
NOTE
yUse
y the standard Macintosh
adapter since an incompatible
adapter is available in the
market. (Different signaling
system)
Apple computers may require an adapter to
yy
connect to this monitor. Call or visit their web
site for more information.
PC
(not included)
PC
USING THE MONITOR
11
Display Port Connection
Transmits the digital video and audio signals from
your PC to the monitor. Connect the PC and the
monitor with the HDMI cable as shown in the
following illustrations.
Select HDMI input source.
Transmits the digital video and audio signals from
your PC to the monitor. Connect the PC and the
monitor with the Display Port cable as shown in
the following illustrations.
Select Display Port input source.
Back of the Product
DP IN
AUDIO IN
Back of the Product
AUDIO IN
DVI IN
DP IN
(not included)
(not included)
PC
NOTE
Use a High Speed HDMI®/TM Cable.
yy
Use a certified cable with the HDMI logo
yy
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
Recommended HDMI Cable Types
yy
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
Please check the PC environment if you
yy
Please check the PC environment if you
yy
cannot hear the sound in HDMI mode. Some
PCs require you to manually change the
default audio output to HDMI.
If you want to use HDMI PC mode, you must
yy
set PC/DTV to PC mode.
When HDMI PC is used, a compatibility
yy
problem might occur.
PC
ENG
ENGLISH
HDMI Connection
12
USING THE MONITOR
ENGLISH
ENG
Adjusting the Screen
Customizing Image Options
Selecting an Image Mode
Customize basic and advanced options of each
image mode for the best screen performance.
Display images in its optimized settings by
selecting one of the preset image modes.
1Press MENU to access the main menus.
1Press MENU to access the main menus.
2 Press the navigation buttons to scroll to
PICTURE and press OK.
3 Press the navigation buttons to scroll to
Picture Mode and press OK.
4 Press the navigation buttons to scroll to an
image mode you want and press OK.
Mode
PICTURE and press OK.
3 Press the navigation buttons to scroll to
Picture Mode and press OK.
4 Press the navigation buttons to scroll to an
image mode you want and press OK.
5 Select and adjust the following options, and
then press OK.
Description
Vivid
Adjusts the video image for the retail
environment by enhancing the contrast,
brightness, color, and sharpness.
Standard
Adjusts the image for a normal
environment.
Cinema
Sport
Game
2 Press the navigation buttons to scroll to
Option
Description
Backlight
Optimizes the video image for a cinematic
look to enjoy movies as if you are in a
movie theater.
djusts the brightness of the screen
A
by controlling the LCD backlight. If
you decrease the brightness level,
the screen becomes darker and the
power consumption will be reduced
without any video signal loss.
Contrast
Optimizes the video image for high and
dynamic actions by emphasizing primary
colors such as white, grass, or sky blue.
Increases or decreases the gradient
of the video signal. You may use
Contrast when the bright parts of the
picture are saturated.
Brightness
Adjusts the base level of the signal in
the picture. You may use Brightness
when the dark areas of the picture are
saturated.
Sharpness
Adjusts the level of crispness in the
edges between the light and dark
areas of the picture. The lower the
level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and
green levels.
Color Temp.
Set to warm to enhance hotter Colors
such as red, or set to cool to make
picture bluish.
Advanced
Control
Customizes the advanced options.
Refer to the Advanced image options.
Picture Reset
Restores the options to the default
setting.
Optimizes the video image for a fast
gaming screen such as PCs or games.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
USING THE MONITOR
13
Adjusting the Sound
Customize options of each image mode for the
best image quality.
This function works in the following mode:
yy
RGB [PC] mode.
Selecting an Sound Mode
1Press MENU to access the main menus.
1Press MENU to access the main menus.
2 Press the navigation buttons to scroll to
2 Press the navigation buttons to scroll to AUDIO
3 Press the navigation buttons to scroll to Screen
3 Press the navigation buttons to scroll to Sound
4 Select and adjust following options, and then
4 Press the navigation buttons to scroll to a
PICTURE and press OK.
and press OK.
press OK.
Option
Description
This Monitor has 5 preset sound modes to
compliment different types of video content.
and press OK.
Mode and press OK.
sound mode you want and press OK.
Mode
Description
Resolution
Selects a proper resolution. See
“Customizing PC display options”.
Standard
Select when you want standard-quality
sound.
Auto
Adjusts the screen position, clock, and
phase automatically.
The displayed image may be unstable for
a few seconds while the configuration is
in progress.
Music
Select when you listen to music.
Cinema
Select when you watch movies.
Sport
Select when you watch sport events.
Game
Selects when you play games.
Config.
Position/
Adjusts the options when the picture is
Size/Phase not clear, especially when characters are
shaky. Run Auto Config. before adjusting
these.
Reset
Restores the options to the default
setting.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
ENG
ENGLISH
Customizing PC Display Options
14
USING THE MONITOR
Customizing Sound Options
ENGLISH
ENG
You may customize options of each sound mode
for the best sound quality.
1Press MENU to access the main menus.
2 Press the navigation buttons to scroll to AUDIO
and press OK.
Using Additional Options
Adjusting Aspect Ratio
Resize the image to view the image at its optimal
size by pressing ARC while you are watching
content.
3 Press the navigation buttons to scroll to Sound
Mode and press OK.
CAUTION
4 Press the navigation buttons to scroll to a
sound mode you want and press OK.
5 Select and adjust following options, and then
press OK.
Option
Description
Infinite
LG's Infinity Sound option provides 5.1
Sound
channel stereo quality sound from two
If a fixed image displays on the screen for a
yy
long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.
If the aspect ratio is set to 4:3 for a long
yy
period of time, image burn may occur on the
letterboxed area of the screen.
speakers.
Treble
Controls the dominant sounds in the
output. When you turn up the treble, it
NOTE
will increase the output of the higher
frequency range.
Bass
Controls the softer sounds in the
output. When you turn up the bass, it
You can also change the image size by
yy
accessing the main menus.
will increase the output of the lower
frequency range.
Reset
Resets the sound mode to the default
setting.
MODE AV Component RGB
Display
DVI-D
HDMI
Port
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
ARC
PC
DTV PC
DTV PC DTV PC
16:9
o
o
o
o
o
o
o
o
o
Just Scan
x
o
x
o
x
o
x
o
x
1:1
x
x
o
x
o
x
o
x
o
4:3
o
o
o
o
o
o
o
o
o
Zoom
o
o
x
o
x
o
x
o
x
Cinema
Zoom 1
o
o
x
o
x
o
x
o
x
USING THE MONITOR
15
- 4:3 : This selection will allow you to view a
picture with an original 4:3 aspect ratio, black
bars will appear on both the left and right of the
screen.
- Just Scan : This Selection will allow you view
the picture of best quality without loss of original
picture in high resolution image.
Note: If there is noise in original picture, You can
see the noise at the edge.
- Zoom : This selection will allow you to view the
picture without any alteration, while filling the
entire screen. However, the top and bottom of
the picture will be cropped.
Just Scan
- 1:1 : The aspect ratio is not adjusted from the
original. (Only Display Port PC, HDMI PC,
DVI-D PC, RGB PC)
- Cinema Zoom 1 : Choose Cinema Zoom
when you want to enlarge the picture in correct
proportion. Note: When enlarging or reducing
the picture, the image may become distorted.
ENG
ENGLISH
- 16:9 : This selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen (useful for viewing 4:3 formatted
DVDs).
16
USING THE MONITOR
Using the Input List
ENGLISH
ENG
Selecting an input source
1Press INPUT to access the input source list.
-The connected device displays on each input
source.
2 Press the Navigation buttons to scroll to one of
the input sources and press OK.
Input source
Description
AV
Watch video from a VCR or other
external devices.
Component
Watch content from a DVD or other
external devices, or through a
digital set-top box.
RGB
View a PC display on the screen.
Display Port
Watch content from a PC, DVD
of Digital set-top box other high
definition devices.
DVI-D
View a PC display on the screen.
HDMI
Watch content from a PC, DVD
of Digital set-top box other high
definition devices.
ENTERTAINMENT
17
Connecting to a Wired Network
(Depending on model)
1Press MENU to access the main menus.
Connect the display to a local area network (LAN)
via the LAN port as shown on the following illustration and set up the network settings.
This monitor only supports a wired network connection.
After making a physical connection, a small
number of home networks may require the display
network settings to be adjusted. For most home
networks, the display will connect to automatically
without any adjustments.
For detail information, contact your internet provider or router manual.
LAN
Router
@
Internet
Internet
To set up the network seetings: (Even if your display has already connected automatically, running
setup again will not harm anything),
LAN
WAN
2 Press the navigation buttons to scroll to NETWORK and press OK.
3 Press the navigation buttons to select Network
Setting and press OK.
4 If you already set network setting, select
Resetting. The new connection settings resets
the current network settings.
5Select IP Auto Setting or IP Manual Setting.
-If selecting IP Manual Setting, press the
Navigation and Number buttons. IP addresses will need to be input manually.
-IP Auto Setting: Select this if there is a
DHCP server (Router) on the local area network (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you’re using a broadband router or broadband modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be determined.
6 When you are finished, press EXIT.
ETHERNET
Cable modem
CAUTION
yy
Do not connect a modular phone cable to the
LAN port.
yy
Since there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service
provider.
CAUTION
yy
Network setting menu will not be available
until the display is connected to physical
network.
yy
Since there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service
provider.
ENG
ENGLISH
ENTERTAINMENT
18
ENTERTAINMENT
NOTE
ENGLISH
ENG
yy
If you want to access the Internet directly on
your display, the internet connection should
always be on.
yy
If you cannot access the Internet, check
the network conditions from a PC on your
network.
yy
When you use Network Setting, check the
LAN cable or check if DHCP in the router is
turned on.
yy
If you do not complete the network settings,
the network may not work properly.
Tips for Network setting
yy
Use a standard LAN cable with this display. Cat5
or better with a RJ45 connector.
yy
Many network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the display to the
home network, quickly power off and/or disconnect the power cable of the home network router
or cable modem. Then power on and/or connect
the power cable again.
yy
Depending on the internet service provider
(ISP), the number of devices that can receive
internet service may be limited by the applicable
terms of service. For details, contact your ISP.
yy
LG is not responsible for any malfunction of the
display and/or the internet connection feature
due to communication errors/malfunctions associated with your internet connection, or other
connected equipment.
yy
LG is not responsible for problems within your
internet connection.
yy
You may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
yy
Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
Internet connection.
yy
Any fees charged by an ISP including, without
limitation, connection charges are your responsibility.
yy
A 10 Base-T or 100 Base-TX LAN port is
required when using a wired connection to this
display. If your internet service does not allow for
such a connection, you will not be able to connect the display.
yy
A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with your
ISP, you may not be able to use the internet
connection feature contained in this display or
you may be limited to the number of devices you
can connect at the same time. (If your ISP limits
sub scription to one device, this display may
not be allowed to connect when a PC is already
connected.)
yy
The use of a Router may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
Network Status
1Press MENU to access the main menus.
2 Press the navigation buttons to scroll to NETWORK and press OK.
3 Press the navigation buttons to select Network
Status.
4Press OK to check the network status.
5 When you are finished, press EXIT.
Option
Setting
Test
Close
Description
Return to the network setting menu.
Test the current network status after
setting the network.
Return to the previous menu.
ENTERTAINMENT
Connecting USB Storage Devices
or
CAUTION
yy
Do not turn the display off or remove a USB
storage device while the EMF (my media)
Menu is activated, as this could result in
loss of files or damage to the USB storage
device.
yy
Back up your files saved on a USB storage
device frequently, as you may lose or damage the files and this may be not covered by
the warranty.
Tips for using USB storage devices
yy
Only a USB storage device is recognizable.
yy
If the USB storage device is connected
through a USB hub, the device is not recognizable.
yy
A USB storage device using an automatic
recognition program may not be recognized.
yy
A USB storage device which uses its own
driver may not be recognized.
yy
The recognition speed of a USB storage
device may depend on each device.
yy
Please do not turn off the display or unplug
the USB device when the connected USB
storage device is working. When such device
is suddenly separated or unplugged, the
stored files or the USB storage device may
be damaged.
yyPlease do not connect the USB storage device
which was artificially maneuvered on the PC.
The device may cause the product to malfunction or fail to be played. Never forget to use
only a USB storage device which has normal
music files, image files, or movie files.
yy
Please use only a USB storage device which
was formatted as a FAT32 file system or
NTFS file system provided with the Windows operating system. In case of a storage
device formatted as a different utility program
which is not supported by Windows, it may
not be recognized.
yy
Please connect power to a USB storage
device(over 0.5 A) which requires an external
power supply. If not, the device may not be
recognized.
yy
Please connect a USB storage device with
the cable offered by the device maker.
yy
Some USB storage devices may not be supported or operated smoothly.
yy
File alignment method of USB storage
device is similar to Window XP and filename
can recognize up to 100 English characters.
yy
Be sure to back up important files since data
stored in a USB memory device may be
damaged. We will not be responsible for any
data loss.
yy
If the USB HDD does not have an external
power source, the USB device may not be
detected. So be sure to connect the external
power source.
ENG
ENGLISH
You can connect USB storage devices such as
a USB flash memory, external hard drive to the
display and use multimedia features .
Connect a USB flash memory or USB memory
card reader to the Display as shown on the following illustration. The My media screen appears.
19
20
ENTERTAINMENT
ENGLISH
ENG
- Please use a power adaptor for an external
power source. We do not guarantee an USB
cable for an external power source.
yy
If your USB memory device has multiple
partitions, or if you use a USB multi-card
reader, you can use up to 4 partitions or USB
memory devices.
yy
If a USB memory device is connected to a
USB multi-card reader, its volume data may
not be detected.
yy
If the USB memory device does not work
properly, disconnect and reconnect it.
yy
How fast a USB memory device is detected
differs from device to device.
yy
If the USB is connected in Standby Mode,
specific hard disk will automatically be
loaded when the display is turned on.
yy
The recommended capacity is 1 TB or less
for a USB external hard disk and 32 GB or
less for USB memory.
yy
Any device with more than the recommended
capacity may not work properly.
yy
If a USB external hard disk with a Energy
Saving function does not work, turn the
hard disk off and on again to make it work
properly.
yy
USB storage devices below USB 2.0 are
supported as well. But they may not work
properly in the movie list.
yy
Maximum of 999 folders or files can be recognized under one folder.
yy
It is recommended to use a certified USB
Browsing Files
Access the photo, music, or movie lists and browse
files.
1 Connect a USB storage device.
2 Press MENU to access the main menus.
3 Press the navigation buttons to scroll to My
Media and press OK.
4 Press the navigation buttons to choose
from Movie List, Photo List, Music List, or
Contents List and press OK.
Movie List
Photo List
Music List
2
1
Page 1/1
Photo List
USB External
001
002
010
011
Drive1
Page 1/1
003
004
005
006
012
013
014
015
Move
To Music List
Contents List
View
Change Numbers
007
008
Page Change
Mark Mode
No.
storage device and cable. Otherwise, a USB
storage device may not be detected or a
2
Current page/Total pages
play back the files distributed and stored
by SuperSign Manager. A USB hard disk or
multi-card reader will not work.
yy
Only an FAT 32 file formatted storage device
can play back the files distributed and stored
by SuperSign manager.
yy
A USB 3.0 storage device may not work.
yy
Data on some USB storage devices may be
damaged in a high temperature environment.
Mark
Exit
Description
Moves to upper level folder
yy
Only a USB memory stick can be used to
5
3
1
playback error may occur.
009
4
Corresponding buttons on the
remote control
Current page/ total pages of
contents under the folder
4
focused on 1
Contents under the folder
5
focused on 1
Button
Description
Repeatedly, press the GREEN button to
converted to Movie List->Photo List,
Green
Photo List->Music List, Music ListButton
>Contents List or Contents List->Movie
List.
Yellow A method to view in 5 large thumbnail
Button or simple list.
Blue
Convert to Mark Mode.
Button
3
ENTERTAINMENT
21
Supported File Formats
Supported file format
DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T
RP,TP,ASF,WMV,FLV)
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*.
mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*.
avi(motion-jpeg)/*.
mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting
file
Type
Supported file format
File
Item
Profile
Extensions
Photo JPEG
JPG
Audio format : Dolby Digital, AAC, Mpeg, MP3,
LPCM, HE-AAC, ADPCM, WMA
yy SOF0:
baseline
yy SOF1:
Extend
Sequential
yy SOF2:
Progressive
Photo size
yy Min: 64 x 64
yy Max Type:
1366 x 768
Bit rate
32 kbps to 320
kbps
32 kHz, 44.1
kHz, 48 kHz
(MPEG1 L3)
PNG
BMP
Video format : DivX 3.11, DivX4, DivX5. DivX6
Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10
beta-1/beta-2,
Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1,
JPEG, Sorenson H.263
supported
file format
Music MP3
Sampling
rate
Bit rate : within 32 kbps to 320 kbps(MP3)
External Subtitle format : *.smi/*.srt/*.sub
(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.
txt(TMPlayer)/*.psb(PowerDivX)
Photo
Internal Subtitle format : only, XSUB (It is the
subtitle format used in DivX6 files)
JPEG
Music
Baseline : 64 x 64 to 15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
yy You can play JPEG files only.
yy Non-supported files are displayed in the form
of predefined icon.
MP3
Bit rate 32 to 320
yy Sampling rate MPEG1 Layer3 : 32 kHz, 44.1
kHz, 48 kHz
yy Sampling rate MPEG2 Layer3 : 16 kHz, 22.05
kHz, 24 kHz
yy Sampling rate MPEG2.5 Layer3 : 8 kHz,
11.025 kHz, 12 kHz
File Extensions : *.cts/ *.cse
Content
(when
Movie
using
File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*.
SuperSign
trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.avi/*.asf/*.
Manager)
wmv/*.avi(motion JPEG)/*.mp4(motion JPEG)/*.
mkv(motion JPEG)
Video format: MPEG1, MPEG2, MPEG4,H.264/
AVC, DivX 3.11, DivX4, DivX5. DivX6,
Xvid 1.00,Xvid 1.01, Xvid 1.02, Xvid 1.03,Xwvid
1.10-beta1/2, JPEG, VC1(WVC1/WMV3)
Audio format: MP2,MP3,Dolby Digital, LPCM,
AAC, HE-AAC,LPCM, ADPCM, WMA, MP3
16 kHz, 22.05
kHz, 24 kHz
(MPEG2 L3)
8kHz, 11.025
kHz, 12 kHz
(MPEG2.5 L3)
Viewing Movies
Play video files on display. Your display shows all
of the video files saved in a USB storage device or
shared folder on a PC.
1 Press the navigation buttons to scroll to My
Media and press OK.
2 Press the navigation buttons to scroll to Movie
List and press OK.
3 Press the navigation buttons to scroll to a
folder you want and press OK.
4 Press the navigation buttons to scroll to a file
you want and press OK.
ENG
ENGLISH
Type
Movie
22
ENTERTAINMENT
ENGLISH
ENG
Drive1
USB1 USB Drive
001
002
005
006
Page 1/1
003
Move
To Photo list
6 Control playback by using the following buttons.
Page 1/1
Movie List
Change Numbers
004
Play
Page Change
Mark
01:02:30 / 02:30:25
Option
Exit
Mark Mode
Hide
Exit
Page 1/1
Movie List
Mark Mode
Drive1
USB1 USB Drive
001
002
005
Page 1/1
003
004
Button
051. Apple_ ......
02:30:25
006
Description
Stops the playback
Plays a video
Pauses or resumes the playback
Scans backward in a file
Move
Play Marked
Mark All
Unmark All
Mark
Page Change
Exit Mark Mode
Scans forward in a file
Mark
Exit
Show the Option menu.
Hide the menu on the full-sized screen.
Menu
Play Marked
Mark All
Unmark All
Description
Play the selected movie file.
Once a movie file finishes playing,
the next selected one will be played
automatically.
Return to Movie List.
Skips to specific points in a file during playback. The time of a specific
or
some files, this function may not work
Mark all movie files on the screen.
Deselect all marked movie files.
Exit Mark Mode Exit the Mark Mode.
5Play a movie.
NOTE
yy
Non-supported files are displayed the preview
image by icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
point will appear on the status bar. In
ENERGY
SAVING
properly.
Adjusts the screen brightness to save
energy.
ENTERTAINMENT
Tips for Using Playing Video Files
When you are watching the movie by Movie
yy
List function, you can adjust an image by
Energy Saving key on the remote control.
User setup for each image mode does not
operate.
Video Options
1 Press MENU to access the Pop-Up menus.
2 Press the Navigation buttons to scroll to Set
Video Play., Set Video. or Set Audio. and
press OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
yy
When replaying the video file after stopping,
you can play from where it stopped previously.
ENG
ENGLISH
yy
Some user-created subtitles may not work
properly.
yy
Some special characters are not supported
in subtitles.
yy
HTML tags are not supported in subtitles.
yy
Subtitles in languages other than the supported languages are not available.
yy
The screen may suffer temporary interruptions (image stoppage, faster playback, etc.)
when the audio language is changed.
yy
A damaged movie file may not be played
correctly, or some player functions may not
be usable.
yy
Movie files produced with some encoders
may not be played correctly.
yy
If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
yy
HD videos with a maximum of 1920 x 1080
@ 25/30 P or 1280 x 720 @ 50/60 P are
supported, depending on the frame.
yy
Videos with resolutions higher than 1920
X 1080 @ 25/30 P or 1280 x 720 @ 50/60
P may not work properly depending on the
frame.
yy
Movie files other than the specified types and
formats may not work properly.
yy
Max bitrate of playable movie file is 20 Mbps.
(only, Motion JPEG : 10 Mbps)
yy
We do not guarantee smooth playback of
profiles encoded level 4.1 or higher in H.264/
AVC.
yy
DTS Audio codec is not supported.
yy
A movie file more than 30 GB in file size is
not supported for playback.
yy
A DivX movie file and its subtitle file must be
located in the same folder.
yy
A video file name and its subtitle file name
must be identical for it to be displayed.
yy
Playing a video via a USB connection that
doesn’t support high speed may not work
properly.
yy
Files encoded with GMC (Global Motion
Compensation) may not be played.
23
24
ENTERTAINMENT
When you select the Set Video Play,,
ENGLISH
ENG
1 Press the Navigation buttons to scroll to show
Code Page
Latin1
German, Italian, Swedish, Finnish,
the Picture Size, Audio Language, Subtitle
Language, or Repeat.
2 Press the navigation buttons to scroll to make
appropriate adjustments.
Menu
Picture Size
Description
Selects your desired picture
Audio
format during movie play.
Changes the Language Group of the
Language
audio during movie play. Files with a
Subtitle
single audio track cannot be selected.
Turn on/off the subtitle.
Support Language
English, Spanish, French,
Dutch, Portuguese, Danish, Romanian, Norwegian, Albanian, Gaelic,
Welsh, Irish, Catalan,Valencian
Bosnian, Polish, Croatian, Czech,
Latin2
Slovak, Slovenian, Serbian,
Latin4
Cyrillic
Hungarian
Estonian, Latvian, Lithuanian
Bulgarian, Macedonian, Russian,
Greek
Korean
Ukrainian, Kazakh
Greek
Korean
Language
Language
Activated for SMI subtitle and
can select the language within the
subtitle.
Code Page
Can select the font for subtitle.
When set to default, same font as
general menu will be used.
Sync
Adjusts the time synchronization of
the subtitle from -10 secs to +10 secs
by steps of 0.5 secs during movie
play.
Position
Changes the position of the
subtitle either up or down during
movie play.
Size
Selects your desired Subtitle size
Repeat
during movie play.
Turn on/off repeat function of
movie playback. When turned on, the
file within the folder will be played
back repeatedly. Even when the
repeated playback is turned off, it can
run the playback if the file name is
similar to the previous file.
NOTE
yy
Only 10,000 of sync blocks can be supported within the subtitle file.
yy
When playing a video, you can adjust the
picture size by pressing the ARC button.
yy
Subtitles in your language are only supported when the OSD menu is also in this
language.
yy
The code page options may be disabled depending on the language of the subtitle files.
yy
Select the appropriate code page for the
subtitle files.
ENTERTAINMENT
When you select the Set Video,,
appropriate adjustments.
Page 1/1
Photo List
USB1 USB Drive
001
Drive1
002
010
011
Page 1/1
003
004
005
006
012
013
014
015
When you select the Set Audio,,
Move
View
Change Numbers
To Music List
008
009
Page Change
Mark
Exit
Mark Mode
1 Press the navigation buttons to scroll to show
the Sound Mode, Clear Voice II or Balance.
007
Page 1/1
Photo List
Mark Mode
USB1 USB Drive
Drive1
Page 1/1
2 Press the navigation buttons to scroll to make
appropriate adjustments.
001
010
002
011
003
004
005
006
012
013
014
015
Move
Viewing Photos
View Marked
Mark All
007
Mark
Unmark All
008
009
Page Change
Exit Mark Mode
Mark
Exit
View image files saved in a USB storage device.
The displays on the screen may differ from the
model.
View Marked
Display the selected photo file.
1 Press the navigation buttons to scroll to My
Mark All
Mark all photo files on the screen.
Unmark All
Deselect all marked photo files.
Media and press OK.
2 Press the navigation buttons to scroll to Photo
List and press OK.
3 Press the navigation buttons to scroll to a
folder you want and press OK.
Menu
Description
Exit Mark Mode Exit the Mark Mode.
5 View photos.
4 Press the navigation buttons to scroll to a file
you want and press OK.
NOTE
yy
Non-supported files are displayed the preview image by icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
ENG
ENGLISH
1 Press the navigation buttons to scroll to make
25
26
ENTERTAINMENT
Using Photo Options
ENGLISH
ENG
Option
ENERGY
Use the following options while viewing photos.
Description
Adjusts the screen brightness to save
energy.
SAVING
yy Slide Speed: Selects a slideshow
speed (Fast, Medium, Slow).
yy Transition Effect: Set the view mode
of the slideshow.
yy BGM: Selects a music folder for the
background music.
NOTE
yyYou cannot change the music
folder while the background
music is playing.
yyYou can only select the MP3
folder saved on the device that
currently displays the photo.
2/13
Slideshow
Options
Option
Slideshow
BGM
Option
BGM
Hide
Exit
Number of selected photos
Description
Starts or stops a slideshow with selected
photos.
If there are no selected photos, all photos saved in the current folder display
during a slideshow.
Select Option to set the speed and view
mode of the slideshow.
Turns the background music on or off.
To set the background music folder,
select Option.
You can adjust Option by MENU button
on the remote control.
Rotates photos clockwise (90°, 180°,
270°, 360°).
NOTE
Hides the option window.
To display the options, press OK.
Return to Photo List.
Photo Options
1 Press MENU to show the Option menus.
2 Press the Navigation buttons to scroll to Set
Photo View, Set Video. or Set Audio. and
press OK.
yyThe supported photo size is
limited. You cannot rotate a
photo if the resolution of the
rotated width is larger than the
supported resolution size.
Enlarges the image to 200% or 400%.
NOTE
yyZoom to 200% or 400% only
work for image of 1372×772
pixel size or larger.
yyFor image of 960×540 pixel
size or larger, only zoom to
400% works properly.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
ENTERTAINMENT
27
When you select the Set Photo View,
2 Press the Navigation buttons to scroll to make appropriate adjustments.
Transition Effect Option
Option
Description
Sliding
Pushes the current slide out of view as it plays to the next slide.
Stairs
Pushes the current slide in a staircase shape as it plays to the next slide.
Door Open
/Close
Pushes the current slide like opening or closing the door as it plays to the next slide.
Shutter
Pushes the current slide like drawing or pulling down the blind as it plays to the next slide.
Fade In
The current photo disappears and the next photo appears slowly.
ENG
ENGLISH
1 Press the Navigation buttons to scroll to select Slide Speed,Transition Effect, or BGM.
28
ENTERTAINMENT
When you select the Set Video,
Listening to Music
ENGLISH
ENG
1 Press the navigation buttons to scroll to make
appropriate adjustments.
1 Press the navigation buttons to scroll to My Media and press OK.
2 Press the navigation buttons to scroll to Music
When you select the Set Audio,
1 Press the navigation buttons to scroll to show
the Sound Mode, Clear Voice II or Balance.
2 Press the navigation buttons to scroll to make
appropriate adjustments.
List and press OK.
3 Press the navigation buttons to scroll to a folder
you want and press OK.
4 Press the navigation buttons to scroll to a file
you want and press OK.
Page 1/1
Music List
USB1 USB Drive
Drive1
001. - B01.mp3
00:00
Page 1/1
002. -B02.mp3
00:00
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Move
Play
Page Change
Change Numbers
To Movie List
Mark Mode
Mark
Exit
Page 1/1
Music List
Mark Mode
USB1 USB Drive
Drive1
001. - B01.mp3
00:00
Page 1/1
002. -B02.mp3
00:00
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Move
Play Marked
Menu
Play Marked
Mark All
Unmark All
Mark All
Mark
Page Change
Unmark All
Exit Mark Mode
Exit
Description
Display the selected music file.
Mark all music files on the screen.
Deselect all marked music files.
Exit Mark Mode Exit the Mark Mode.
5 Play music.
Mark
ENTERTAINMENT
6 Control playback by using the following buttons.
004. - B04.mp3
00:00
Drive1
005. - B05.mp3
00:00
Page 1/1
006. - B06.mp3
00:00
007. - B07.mp3
00:00
005. - B05.mp3
02:30 / 03:25
Option
Play with Photo
Button
NOTE
008. - B08.mp3
00:00
Hide
Exit
Description
Stops playback.
Plays a music file.
Pauses or resumes playback.
Skips to the next file.
Skips to the previous file.
or
When playing,
When you press the
button, the previous music file will be played.
Green
Button
ENERGY
SAVING
or
When you press the
button, the next
music file will be played.
Start playing the selected music files and
then move to the Photo List.
Adjusts the screen brightness to save
energy.
Show the Option menu.
Hides the option window.
To display the options, press OK.
When you press the EXIT button while
the Music player is displayed, only the
music will be stopped and the player will
not return to normal viewing.
When you press the EXIT button while
the music is stopped or while the music
player is hidden, the player will return to
normal viewing.
When using the < or > button during
playback a cursor indicating the position
can be played.
yy
Non-supported files are displayed the preview image by icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
yy
A damaged or corrupted music does not play
but displays 00:00 in playtime.
yy
A music downloaded from a paid service with
copyright protection does not start but displays inappropriate information in playtime.
yy
If you press OK,
buttons, screen saver is
stopped.
yy
The
,
,
,
,
buttons on the remote control are also available in this mode.
yy
You can use the
button to select the next
music and the
button to select the previous music.
file name
002. B02.mp3
00:31 / 04:04
Time elapsed /Duration
ENG
ENGLISH
3 file(s) Marked
Tips for Playing Music Files
This unit doesn't support the ID3 Tag
yy
embedded MP3 files.
Page 1/1
Music List
29
30
ENTERTAINMENT
Music Options
ENGLISH
ENG
1 Press MENU to access the Pop-Up menus.
2 Press the navigation buttons to scroll to Set Audio Play. or Set Audio. and press OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
When you select the Set Audio Play.,
Viewing the Contents List
Plays back the stored files using the Export option
in SuperSign Manager.
1 Press the navigation buttons to scroll to My
Media and press OK.
2 Press the navigation buttons to scroll to Contents List and press OK.
3 Press the navigation buttons to scroll to a
folder you want and press OK.
4 Press the navigation buttons to scroll to a file
you want and press OK.
test1.cts
07/01/2011
1 Press the navigation buttons to scroll to select
Page 1/1
Contents List
USB1 USB Drive
Drive1
Page 1/1
test2.cts
07/01/2011
test3.cts
07/01/2011
test4.cts
07/01/2011
test5.cts
07/01/2011
the Repeat or Random.
Move
2 Press the navigation buttons to scroll to make
To Movie List
Change Numbers
Play
P
Page Change
Exit
appropriate adjustments.
NOTE
When you select the Set Audio,,
1 Press the navigation buttons to scroll to select
the Sound Mode, Clear Voice II or Balance.
2 Press the navigation buttons to scroll to make
appropriate adjustments.
yy
While playing media files from Contents List,
only the BACK, EXIT, or Volume button are
available. Selecting the BACK or EXIT button
stops playing media files and returns to the
screen view mode.
yy
If there is the AutoPlay folder in the USB
device and its files are in supported formats,
they can be played back automatically when
the USB device is connected to the monitor.
ENTERTAINMENT
31
DivX® VOD Guide
In order to play purchased or rented DivX® VOD
contents, you should register your device with 10
digit DivX registration code from your device at
www.divx.com/vod.
1Press MENU to access the main menus.
2 Press the navigation buttons to scroll to MY MEDIA and press OK.
3 Press the Blue button.
4 Press the navigation buttons to scroll to DivX
Reg. Code and press OK.
5 View the registration code of your display.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
You must register your device
to play DivX protected videos.
Registration code : **********
Register at http://vod.divx.com
Close
NOTE
yy
While you are checking the registration code,
some buttons may not work.
yy
If you use the DivX registration code of
another device, you cannot play the rented
or purchased DivX file. Make sure to use
the DivX registration code assigned to your
product.
yy
The video or audio files that are not converted by the standard DivX codec may be
corrupted or not be played.
yy
The DivX VOD code allows you to activate
up to 6 devices under one account.
ENG
ENGLISH
DivX® VOD Registration
32
ENTERTAINMENT
DivX® VOD Deregistration
ENGLISH
ENG
You should deregister your device with 8 digit DivX
deregistration code from your device at www.divx.
com/vod.
1Press MENU to access the main menus.
Using PIP/PBP
Videos or pictures stored on the USB device can
be displayed on a single monitor by dividing them
into the main and subscreens.
2 Press the navigation buttons to scroll to MY MEDIA and press OK.
1 Press the MENU button to move to OPTION
3 Press the Blue button.
4 Press the navigation buttons to scroll to Deactivation and press OK.
5 Press the navigation buttons to select Yes to
and press OK.
2 Press PIP/PBP to select PIP or PBP and then
press OK.
confirm.
PIP/PBP
Mode
Deregistration code :
********
Deregister at http://vod.divx.com
Continue with registration?
Yes
Move
Prev.
Off
Position
PIP
Size
PBP
No
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
Once the deregistration is executed, you
yy
must register your device again to see DivX®
VOD contents.
3Select Movie List or Photo List from My
Media.
Movie List
Photo List
Music List
Contents List
ENTERTAINMENT
4 Select a file you want and then press OK.
6For sound select either Main or Sub. You must
Drive1
USB1 USB Drive
001
002
005
006
Page 1/1
003
004
051. Apple_ ...
02:30:25
Select the sound path.
Main
Move
Change Numbers
Play
Page Change
Sub
Mark
Exit
Mark Mode
7 The sub screen is displayed on the main screen.
5Select the PIP or PBP icon from the play list.
01:02:30 / 02:30:25
Exit
Hide
Option
< MOVIE LIST >
2/13
Slideshow
BGM
< PHOTO LIST >
Option
Hide
Exit
ENG
ENGLISH
to select the output sound before running the
PIP or PBP function.
Page 1/1
Movie List
To Photo list
33
34
CUSTOMIZING SETTINGS
ENGLISH
ENG
CUSTOMIZING SETTINGS
Accessing Main Menus
MARK
ARC
PSM
1Press MENU to access the main menus.
P
BRIGHT A
NESS G
E
MUTE
MENU
2 Press the navigation buttons to scroll to one of the following menus and
press OK.
S.MENU
OK
BACK
3 Press the navigation buttons to scroll to the setting or option you want
AUTO
TILE
EXIT
ID
ON
OFF
and press OK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
PICTURE
Adjusts the image size,
quality, or effect.
PICTURE
OPTION
Customizes the general
settings.
OPTION
AUDIO
Adjusts the sound quality,
effect, or volume level.
AUDIO
NETWORK
NETWORK
Sets up the network
setting.
TIME
MY MEDIA
TIME
Sets the time, date, or
timer feature.
MY MEDIA
Display and play movie,
photo and music content
stored on your USB.
CUSTOMIZING SETTINGS
PICTURE Settings
PICTURE
Move
Aspect Ratio
2 Press the Navigation buttons to scroll to PICTURE and
press OK.
Easy Brightness Control : Off
BLU Maintenance
: Off
3 Press the Navigation buttons to scroll to the setting or
Picture Mode
: Standard
Energy Saving
OK
ENG
ENGLISH
1Press MENU to access the main menus.
35
: 16:9
: Off
Smart Energy Saving : Off
option you want and press OK.
-To return to the previous level, press BACK.
Backlight
50
Contrast
50
Brightness 50
Color
4 When you are finished, press EXIT.
50
Tint
When you return to the previous menu, press BACK.
0
R
G
Color Temp. 0
W
C
Advanced Control
Picture Reset
Screen
The available picture settings are described in the following:
Setting
Aspect Ratio
Description
Changes the image size to view images at its optimal size.
Sets to automatically adjust the screen brightness corresponding to the surroundings.
Energy Saving Level
Easy
Brightness
Control
Auto
Adjust automatically
Off
Disables Energy Saving function
Minimum/
Medium/
Maximum
Selects the brightness level of the backlight.
Screen off
The screen turns off in 3 seconds.
Adjusts the backlight according to the schedule you set.
Mode
Off
Disables Easy Brightness Control.
On
Enables Easy Brightness Control.
NOTE
yyEasy Brightness Control is disabled if the current time is not set.
yyIf Energy Saving is set to Maximum, Easy Brightness Control is disabled.
yyYou can set up to six schedules and they will be sorted in time ascending order.
yyIf more than six schedules are added, the latest schedule will be automatically deleted.
yyYou can delete a schedule by pressing the OK button.
yyDuplicate schedules are not added, but the backlight value changes.
yyIt may not be supported depending on the model.
Smart Energy
Saving
Adjusts the backlight and contrast depending on the screen brightness.
Level
Off
Disables the Smart Energy Saving function.
On
Enables the Smart Energy Saving function to save power consumption as much
as the value set in the smart energy saving rate.
36
CUSTOMIZING SETTINGS
Setting
Description
ENGLISH
ENG
BLU
Maintenance
Enables or disables the luminance maintenance function.
Picture Mode
Selects one of the preset image or customizes options in each mode for the best monitor screen
performance. You are also able to customize advanced options of each mode.
The available preset picture modes vary depending on the monitor .
Mode
SCREEN
(In RGB
Mode Only)
Vivid
Adjusts the video image for the retail environment by enhancing the contrast,
brightness, color, and sharpness.
Standard
Adjusts the image for the normal environment.
Cinema
Optimizes the video image for a cinematic look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and dynamic actions by emphasizing primary
Colors such as white, grass, or sky blue.
Game
Optimizes the video image for a fast gaming screen such as PCs or games.
Customizes the PC display options in RGB mode.
Option
Resolution
Selects a proper resolution. See “Customizing PC display options”.
Auto Config.
Adjusts the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is
in progress.
Position/Size/
Phase
Adjusts the options when the picture is not clear, especially when characters are
shaky. Run Auto Config. before adjusting these.
Reset
Restores all options to the default setting.
Picture Mode Options
Setting
Description
Backlight
djusts the brightness of the screen by controlling the LCD backlight. If you decrease the
A
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient of the video signal. You may use contrast when the bright
part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture. You may use brightness when the dark part
of the picture is saturated.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Color Temp.
Set to warm to enhance hotter colors such as red, or set to cool to make picture bluish.
Advanced Control
Customizes the advanced options. Refer to the advanced image options.
Picture Reset
Restores the options to the default setting.
CUSTOMIZING SETTINGS
37
Advanced Control
Description
Adjusts the contrast to keep it at the best level according to the brightness of the screen.
The picture is improved by making bright parts brighter and dark parts darker. (Function
works in the following mode - AV (CVBS), Component, HDMI-DTV, Display Port-DTV)
Dynamic Color
(Off/High/Low)
Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances
hue, saturation and luminance so that red, blue, green and white look more vivid. (Function
works in the following mode - AV (CVBS), Component, HDMI-DTV, Display Port-DTV)
Clear White
(Off/High/Low)
Make the white area of screen brighter and more white.
Skin Color
(-5 to 5)
It detects the skin area of video and adjusts it to express a natural skin color.
Noise Reduction
(Off/High/Medium/Low)
educes screen noise without compromising video quality. (Function works in the following
R
mode - AV (CVBS), Component, HDMI-DTV, Display Port-DTV)
Digital Noise Reduction This option reduces the noise produced while creating digital video signals.
(Off/High/Medium/Low)
Gamma
(High/Medium/Low)
Set your own gamma value. On the monitor, high gamma values display whitish images and
low gamma values display high contrast images.
Black Level
(High/Low)
Low: The picture of the screen gets darker.
High: The picture of the screen gets brighter.
Set black level of the screen to proper level.
(Function works in the following mode - AV (CVBS), Component, HDMI-DTV, Display PortDTV)
NOTE
When using the Smart Energy Saving function, the screen may look saturated in the white area of a
yy
still image.
If Energy Saving is set to minimum, medium, or maximum, the Smart Energy Saving function is
yy
disabled.
If the Smart Energy Saving function is enabled, the BLU Maintenance function may not work properly.
yy
If the Smart Energy Saving function is enabled, the image on the screen may look darker.
yy
ENG
ENGLISH
Setting
Dynamic Contrast
(Off/High/Medium/Low)
38
CUSTOMIZING SETTINGS
AUDIO Settings
AUDIO
ENGLISH
ENG
1Press MENU to access the main menus.
Clear Voice II
2 Press the navigation buttons to scroll to AUDIO and press
Sound Mode
Move
: Off
Balance
OK.
OK
0
L
R
: Standard
Infinite Sound : Off
Treble 50
3 Press the navigation buttons to scroll to the setting or
Bass
option you want and press OK.
50
Reset
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
Digital Audio Input
: Audio In
Speaker
: On
When you return to the previous menu, press BACK.
The available audio options are described in the following:
Setting
Description
Clear Voice ll
By differentiating the human sound range from others, it helps users makes dialog easier to
understand.
Balance
Adjusts balance between the left and right speakers according to your room environment.
Sound Mode
Mode
Standard
Select when you want standard-quality sound.
Music
Select when you listen to music.
Cinema
Select when you watch movies.
Sport
Select when you watch sport events.
Game
Select when you play games.
Digital Audio
Input
HDMI/Display Port: Outputs the sound of digital signal from HDMI and display ports through the
monitor speaker.
Audio In: Outputs the sound through the monitor speaker by connecting HDMI and display ports
to the Audio In port.
Speaker
*The monitor speaker is sold separately.
ON: Enables sound to the monitor speaker.
OFF: Disables sound to the monitor speaker. Use this option when using an external sound
device.
Sound Mode Options
Setting
Description
Infinite Sound
LG's Infinity Sound option provides 5.1 channel stereo sound from two speakers.
Treble
Controls the dominant sounds in the output. When you turn up the treble, it will increase the
output to the higher frequency range.
Bass
Controls the softer sounds in the output. When you turn up the bass, it will increase the output
to the lower frequency range.
Reset
Resets the sound mode to the default setting.
CUSTOMIZING SETTINGS
TIME Settings
TIME
Move
Clock
Daylight Saving : Off
2 Press the navigation buttons to scroll to TIME and press OK.
Off Time : Off
3 Press the navigation buttons to scroll to the setting or option
On Time : Off
Screen Off Time
: Off
you want and press OK.
Sleep Timer : Off
-To return to the previous level, press BACK.
Power On Delay
: Off
4 When you are finished, press EXIT.
Auto Off
: 15 min.
Automatic Standby
: 4hours
OK
When you return to the previous menu, press BACK.
The available time settings are described in the following:
Setting
Description
Clock
Sets the time feature.
Daylight Saving
Sets the current time one hour ahead of Standard Time in the summer season.
Off/On Time
Sets the time to turn on or off the monitor.
Screen Off Time
Sets the time to turn off the screen.
Sleep Timer
Sets the length of time until the monitor to turns off. When you turn the monitor off and turn
it on again, the Sleep Timer will be set to off.
Power on delay
When connecting multiple monitors and turning the power on, the monitors are turned on individually
to prevent overload.
Auto off
If Auto off is active and there is no input signal, the set switches to off mode automatically after 15
minutes.
Automatic
Standby
If you do not use the monitor for more than 4 hours, it will be in off mode automatically.
NOTE
Off/On Time can be saved for up to seven schedules; the monitor is turned on or off at the preset time
yy
in the schedule list. If multiple preset times are stored in the schedule list, this function works at the
nearest time from the current time.
The scheduled power-off function works properly only when the device time is set correctly.
yy
When the scheduled power-on and power-off times are the same, the power-off time has priority over
yy
the power-on time if the set is turned on, and vice versa if the set is turned off.
The Automatic Standby and Auto off functions may not be available in some countries.
yy
ENG
ENGLISH
1Press MENU to access the main menus.
39
40
CUSTOMIZING SETTINGS
OPTION Settings
OPTION
Move
ENGLISH
ENG
1Press MENU to access the main menus.
Language
2 Press the navigation buttons to scroll to OPTION and press
ISM Method
: Normal
DPM Select
: Off
Fail Over
: On
OK
Power Indicator
OK.
3 Press the navigation buttons to scroll to the setting or option
you want and press OK.
Factory Reset
Set ID
:1
Tile Mode
PIP/PBP
-To return to the previous level, press BACK.
USB Content Recovery : Off
Product/Service Info.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Language
To choose the language in which the control names are displayed.
Power Indicator
Use this function to set the power indicator on the front side of the product to on or off.
ISM Method
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
could result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
DPM Select
Normal
Leave on normal if you don't foresee image burn in being a problem.
Orbiter
May help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen,
the screen will move every 2 minutes.
Inversion
This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White Wash
White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
A user can choose to turn the power saving mode on / off.
NOTE
yyYou can set Energy Saving to Off or set the length of time before entering Energy Saving
mode to 5 sec./10 sec./15 sec./1 min./3 min./5 min./10 min.
yyIt makes a little difference according to your environment.
yyIt may not be supported depending on the model.
Fail Over
If there is no input signal, it automatically switches to another input with signal.
Setting
Off
Stops auto switch of the input source.
Auto
Switches to another input source with video signal if no video signal comes
from the current input source.
Manual
Selects the priority of input source for auto switch.
When several input sources are found, the input source with a higher priority
will be selected.
CUSTOMIZING SETTINGS
Setting
41
Description
Select this option to return to the default factory settings.
Set ID
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 255) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
Tile Mode
Tile Mode
To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to RGB Cable by distributor and
RS-232C.
Tile mode and choose Tile alignment and set the ID of the current product to
set location.
* Only after pressing the SET button the adjustments made to the settings will
be saved.
- Tile mode : column x row ( c = 1, 2, 3, 4, 5 r = 1, 2, 3, 4, 5)
- 15 x 15 available.
- Configuration of an integration screen is also available as well as
configuration of One by one Display.
Auto Config.
Adjusts the screen position automatically.
The displayed image may be unstable for a few seconds while the
configuration is in progress.
PC Position
Moving the screen position horizontally and vertically.
PC Size
Adjust the horizontal and vertical size of the screen taking into account the size
of the bezel.
Natural
The image is omitted by the distance between the screens to be naturally
shown.
Reset
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to
Full screen.
NOTE
yyIf Tile Mode is enabled, Smart Energy Saving and the Auto option in Energy Saving will be
disabled to provide the same picture quality as other displays.
PIP/PBP
Videos or photos stored on the USB device can be displayed on a single monitor by dividing them
into the main and subscreens.
Option
Mode
Sets the type of secondary screen.
*OFF: Disables the secondary screen.
*PIP (Picture In Picture): Displays the secondary screen in the main screen.
*PBP (Picture By Picture): Displays the secondary screen next to the main
screen.
Position
Adjusts the position of the subscreen (top left, bottom left, top right, bottom
right) The default value is inthe bottom right.
Size
Adjusts the size of the subscreen (Size 0-10). The default size of the PIP (Size:
0) is 480x270; the maximum size (Size: 10) is 960x540.
NOTE
yyThe position and size options are enabled only in PIP mode.
ENG
ENGLISH
Factory Reset
42
CUSTOMIZING SETTINGS
Setting
Description
ENGLISH
ENG
USB Content
Recovery
Replays the content in a USB when the power is back on if it is turned off during playing a content.
(This function operates the same when a USB is disconnected and connected again.)
Product/Service
Info.
Displays the model name, software version, serial number, IP address, MAC address and home
page.
CUSTOMIZING SETTINGS
Tile Mode
Tile Mode - Natural Mode
Off
When the Tile Mode
option is disabled
When active, the part of the image that would
normally be displayed in the gap between the
monitors is omitted.
1X2
When using 2 monitors
Before
ID 2
ID 1
Tile ID
3X3
When using 9 monitors
2X2
When using 4 monitors
ID 2
ID 3
ID 4
ID 1
ID 2
ID 3
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
4X4
When using 16 monitors
ID 1
ID 2
ID 3
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
ID 10
ID 11
ID 12
ID 13
ID 14
ID 15
ID 16
5X5
When using 25 monitors
ID 1
ID 2
ID 3
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
ID 10
ID 11
ID 12
ID 13
ID 14
ID 15
ID 16
ID 17
ID 18
ID 19
ID 20
ID 21
ID 22
ID 23
ID 24
ID 25
After
ENG
ENGLISH
This monitor can be tiled with additional monitors
to create a large tiled display.
ID 1
43
44
CUSTOMIZING SETTINGS
PIP/PBP
ENGLISH
ENG
Displays videos or photos stored in the USB device
on a single monitor by dividing it into the main and
sub screens.
NOTE
yyThe subscreen is only supported when using the
USB device.
Sub
Mode
USB
*PIP (Picture In Picture): Displays the Sub screen
in the main screen.
*PBP (Picture By Picture): Displays the Sub
screen next to the main screen.
Sub
screen
Main
screen
PIP
PBP
Position
Adjusts the position of the subscreen (top left,
bottom left, top right, bottom right)
top left
top right
bottom left
bottom right
Size
Adjusts the size of the subscreen (Size 0-10).
PBP
960x1080
10 : 960x540
PIP
0:
480x270
1920x1080
Main
Component
O
RGB
O
HDMI/DVI-D/Display Port
O
AV
X
yyYou can only change the size and position in PIP
mode.
yyWith PBP selected, the Aspect Ratio option in the
PICTURE menu is disabled (Fixed as 16:9).
yyWhile running the PBP function, the Tile Mode function
does not work.
yyYou must select the output sound before running
the PIP or PBP functions. (Select either Main or
Sub.)
yyIf you fail to select Main or Sub from the sound
selection box, and if the OSD disappears after
either a period of time or when the Exit or Back
key is pressed, the PIP/PBP subscreen is not
activated.
yyYou cannot change the sound while running the
PIP or PBP functions. If you want to change the
sound, please restart PIP/PBP.
yyThe picture quality of the subscreen is set
according to the values selected in the main menu,
not the USB device.
yyEven when the power is turned off or on, if the
USB device is connected, the PIP/PBP mode plays
again from where it left off.
yyIf you play videos you selected in PIP/PBP mode,
the videos will play back repeatedly in succession.
yyThe buttons below work in PIP mode.
Button
Photo
Movie
CUSTOMIZING SETTINGS
NETWORK Settings
NETWORK
Move
Player Name Setting
2 Press the navigation buttons to scroll to NETWORK and
Network Status OK
Network Setting : Wired
press OK.
: Not connected
Server IP Setting
Server IP Status
: Not connected
3 Press the navigation buttons to scroll to the setting or option
you want and press OK.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Player Name
Setting
Sets the player name used in SuperSign Manager. (Up to 20 characters)
Network Setting
Configure the network settings.
Network Status
Display the network status.
- Internet is connected: Externally connected
- Home network is connected: Only internally connected
- Not connected: When there is no network connection
Server IP Setting
Sets the IP address of the computer (server) on which SuperSign Manager is installed.
Server IP Status
Displays the connection status with the server.
- Not connected: When there is no network connection with SuperSign server
- Waiting for approval: When network connection with SuperSign server has been made, but
access to server has not been approved by the server
- Rejected: When network connection with SuperSign server has been made, but access to server
has been rejected by the server
- Internet is connected: When network connection with SuperSign server has been made and
access to server has also been approved by the server
CAUTION
When setting the Player Name, input delay may occur if you press the buttons on the remote control
yy
continuously.
ENG
ENGLISH
1Press MENU to access the main menus.
45
46
MAKING CONNECTIONS
MAKING CONNECTIONS
ENGLISH
ENG
Connect various external devices to the ports on the monitor’s back panel.
1 Find an external device you want to connect to your monitor shown on the following illustration.
2 Check the connection type of the external device.
3 Go to the appropriate illustration and check the connection details.
HD Receiver
DVD
VCR
HDMI
Component
AV
HDMI
Component
AV
AV
Component
Speaker
USB
Memory Storage
PC
Camcorder/Camera
Gaming device
RGB
DVI-D
HDMI
Display Port
LAN
HDMI
Component
AV
HDMI
Component
AV
NOTE
If you connect a gaming device to the monitor, use the cable supplied with the gaming device.
yy
MAKING CONNECTIONS
47
Component Connection
Connect a HD receiver, DVD, or VCR player to the
Monitor and select an appropriate input mode.
Transmits the analog video and audio signals
from an external device to the monitor. Connect
the external device and the monitor with the 15
pin signal to RCA cable as shown on the following
illustration. To display images by using progressive
scan, make sure to use the component cable.
HDMI Connection
Transmits the digital video and audio signals from
an external device to the monitor. Connect the
external device and the monitor with the HDMI
cable as shown on the following illustration.
ENG
ENGLISH
External Device Connection
Back of the Product
Back of the Product
DVI IN
RGB/AV
/COMPONENT OUT
RGB/AV
/COMPONENT IN
AUDIO IN
AUDIO
IN
RGB/AV
/COMPONENT IN
(not included)
(not included)
NOTE
Use a High Speed HDMI®/TM Cable.
yy
Use a certified cable with the HDMI logo
yy
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
Recommended HDMI Cable Types
yy
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
High Speed HDMI®/TM Cables are tested to
yy
carry an HD signal up to 1080p and higher.
(not included)
RGB/AV
/COMPONEN
48
ENGLISH
ENG
DIO IN
MAKING CONNECTIONS
AV (CVBS) Connection
Connecting to a USB
Transmits the analog video and audio signals
from an external device to the monitor. Connect
the external device and the monitor with the 15
pin signal to RCA cable as shown on the following
illustration.
Connect a USB storage device such as a USB
flash memory, external hard drive, MP3 player,
or a USB memory card reader to the monitor and
access the USB menu to use various multimedia
files.
Back of the Product
RGB/AV
/COMPONENT IN
AUDIO IN
or
(not included)
(not included)
MAKING CONNECTIONS
Connecting to the LAN
LAN
PC
B Using a router (Switch)
LAN
Monitor
Switch
Network
PC
C Using the Internet.Network
LAN
Network
Monitor
PC
ENG
ENGLISH
A Connect PC to monitor directly.
Monitor
NOTE
Using LAN establishes communication
yy
between your PC and the monitor and
enables to use the OSD menus on the PC
as well as on the monitor.
LAN Connection
49
50
MAKING CONNECTIONS
Daisy Chain Monitors
Monitor 1
Monitor 2
Monitor 3
Monitor 4
15-pin D-Sub Signal Cable
(Max 3m)
RGB OUT (PC)
VIDEO
RGB
Mode
Component
Mode
OUT
VIDEO
OUT
ENGLISH
ENG
Use this function to share the RGB video signal with other monitors without having to use a separate signal
splitter box.
To use different products connected to each other Connect one end of the signal input cable (15-pin D-Sub
Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector
of other products
AV(CVBS)
Mode
NOTE
The number of monitors that can be connected to one output may vary depending on signal status
yy
and cable loss. If the signal status is good, and there is no cable loss, it is possible to connect up to
9 monitors. If you want to connect more than this number of monitors, it is recommended to use a
distributor.
When multi-connecting in/out cascade format, no loss cables are recommended.
yy
TROUBLESHOOTING
51
No image is displayed
Problem
Is the product power cord
connected?
Is the power indicator light on?
ower is on, power indicator
P
is red but the screen appears
extremely dark.
The power indicator amber?
oes the 'Out of range'
D
message appear?
oes the 'Check signal cable'
D
message appear?
Resolution
yy See if the power cord is properly connected to the outlet.
yy See if the power switch is turned on.
yy May need service.
yy Adjust brightness and contrast again.
yy Backlight may need repair.
yy If the product is in power saving mode, move the mouse or press any
key.
yy Turn both devices off and then back on.
yy The signal from the PC (video card) is out of the vertical or horizontal
frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution
RGB, HDMI, DVI-D, Display Port: 1920 x 1080 @ 60 Hz
yy The signal cable between PC and product is not connected. Check
the signal cable.
yy Press the INPUT menu in the remote Control to check the input signal.
yy There may be a poor signal transmission occurring intermittently
between the external device and LG monitor set. Disconnect the
signal cable and then reconnect it. Turn the external device or the LG
monitor set off and then on again.
'Unknown Product' message appears when the product is connected.
Problem
Did you install the driver?
Resolution
yy Install the product driver, which is provided with the product, or
download it from the web site. (http://www.lg.com)
yy See if the plug&play function is supported by referring to the video
card user manual.
ENG
ENGLISH
TROUBLESHOOTING
52
TROUBLESHOOTING
ENGLISH
ENG
The screen image looks abnormal.
Problem
Resolution
yy D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select the optimal screen status that fits into the
current mode. If adjustment is not satisfactory, select [PICTURE] [Screen] - [Position] in OSD menu.
yy See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel "Display" Setting menu.
Do thin lines appear on the
yy D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select an optimal screen status that fits into the
background screen?
current mode. If adjustment is not satisfactory, select [PICTURE] [Screen] - [Size] in OSD menu.
Horizontal noise appears or the yy D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select an optimal screen status that fits into the
characters look blurred.
current mode. If adjustment is not satisfactory, select [PICTURE] [Screen] - [Phase] in OSD menu.
The screen is displayed
yy The proper input signal is not connected to the signal port. Connect
abnormally.
the signal cable that matches with the source input signal.
yy There may be a poor signal transmission occurring intermittently
between the external device and LG monitor set. Disconnect the
signal cable and then reconnect it. Turn the external device or the LG
monitor set off and then on again.
When setting the resolution
yy Restart the external devices while the LG monitor is powered on.
for external devices, some
After restarting the external devices, check if the resolution values are
resolution values are not shown
displayed correctly.
correctly in the resolution
settings screen.
Is the screen position wrong?
After-image appears on the product.
Problem
After-image appears when the
product is turned off.
Resolution
yy If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the screen-saver function.
The audio function does not work.
Problem
No sound?
Resolution
Sound is too dull.
yy See if the audio cable is connected properly.
yy Adjust the volume.
yy See if the sound is set properly.
yy Adjust the Clear Voice ll, Treble and Bass appropriately.
Sound is too low.
yy Adjust the volume.
TROUBLESHOOTING
53
Problem
Resolution
Screen has poor color resolution yy Set the number of colors to more than 24 bits (true color) Select
(16 colors).
Control Panel - Display - Settings - Color Table menu in Windows.
creen color is unstable or
S
mono-colored.
yy Check the connection status of the signal cable. Or, re-insert the PC
video card.
Do black spots appear on the
screen?
yy Several pixels (red, green, white or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
The operation does not work normally.
Problem
The power suddenly turned off.
Resolution
yy Is the sleep timer set?
yy Check the power control settings. Power interrupted
ENG
ENGLISH
Screen color is abnormal.
54
SPECIFICATIONS
ENGLISH
ENG
SPECIFICATIONS
LCD Panel
Screen Type
Video Signal
Pixel Pitch
Max. Resolution
TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
0.831 mm (H) x 0.831 mm (V)
RGB : 1920 X 1080 @ 60 Hz
HDMI,DVI-D, Display Port: 1920 X 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution RGB: 1920 X 1080 @ 60 Hz
HDMI,DVI-D, Display Port: 1920 X 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
Vertical Frequency
Synchronization Type
Input Connector
Embedded battery
Power
Rated Voltage
Power Consumption
Environmental
conditions
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
RGB: 30 kHz to 83 kHz
HDMI,DVI-D, Display Port: 30 kHz to 83 kHz
RGB: 56 Hz to 75 Hz
HDMI,DVI-D, Display Port: 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital
15-pin D-Sub, HDMI, DVI-D, Display Port, RS-232C, LAN,
USB, Audio
Applied
AC 100-240 V~ 50/60 Hz 12.0 A
On Mode: 1000 W Typ. 1300 W Max
Sleep Mode (RGB): 1 W
Sleep Mode (HDMI, DVI-D, Display Port)
: 2 W (Set Only / With External Device)
Off Mode: 1 W
0 °C to 50 °C
10 % to 80 %
-20 °C to 60 °C
5 % to 95 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
" " refers to alternating current (AC), and " " refers to direct current (DC).
SPECIFICATIONS
ENG
ENGLISH
Dimensions
(Width x Height x
Depth) / Weight
1654.5 mm x 956.5 mm x 139.5 mm / 54.5 kg
* Applicable only for models that support the speakers
Audio
55
RMS Audio Output
Input Sensitivity
Speaker Impedance
10 W + 10 W (R + L)
0.7 Vrms
8Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
56
SPECIFICATIONS
DTV Mode
RGB (PC) supported mode
ENGLISH
ENG
Resolution
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
Resolution
Component
HDMI,Display
Port (DTV)
640 x 350
31.469
70.8
480i
o
x
o
o
720 x 400
31.468
70.8
480p
640 x 480
31.469
59.94
576i
o
x
640 x 480
37.5
75
576p
o
o
800 x 600
37.879
60.317
720p
o
o
800 x 600
46.875
75
1080i
o
o
832 x 624
49.725
74.55
1080p
o
o
1024 x 768
48.363
60
1024 x 768
60.123
75.029
1280 x 720
44.772
59.855
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1280 x 1024
79.98
75.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
Power Indicator
Mode
Product
On Mode
Sleep Mode
Off Mode
Red
Amber
-
NOTE
HDMI,DVI-D,Display Port (PC) supported mode
Resolution
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
640 x 480
31.469
59.94
800 x 600
37.879
60.317
1024 x 768
48.363
60
1280 x 720
44.772
59.855
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
When the cable is connected to the HDMI or
yy
the display port, you can select the PC/DTV
mode optionally. It is recommended you to
set to the PC mode when connecting to PC;
the DTV mode when connecting to DTV.
NOTE
Vertical frequency: To enable the user to
yy
watch the product display, screen image
should be changed tens of times every
second like a fluorescent lamp. The vertical
frequency or refresh rate is the times of
image display per second. The unit is Hz.
Horizontal frequency: The horizontal interval
yy
is the time to display one vertical line. When
1 is divided by the horizontal interval, the
number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.
IR CODES
57
IR CODES
Function
Note
ENERGY SAVING
R/C BUTTON
08
POWER
R/C BUTTON
0B
INPUT
R/C BUTTON
C4
MONITOR ON
R/C BUTTON
(Discrete IR Code)
C5
MONITOR OFF
R/C BUTTON
(Discrete IR Code)
43
MENU
R/C BUTTON
40
Up
R/C BUTTON
41
Down
R/C BUTTON
07
Left
R/C BUTTON
06
Right
R/C BUTTON
44
OK( )
R/C BUTTON
28
BACK(
5B
EXIT
R/C BUTTON
4D
PSM
R/C BUTTON
02
Volume
R/C BUTTON
03
Volume
R/C BUTTON
09
MUTE
E0
BRIGHTNESS
(PAGE UP)
E1
BRIGHTNESS
(PAGE Down) R/C BUTTON
10 to 19
Number Key
to
R/C BUTTON
72
Red Key (ID ON)
R/C BUTTON
71
Green Key (ID OFF)
R/C BUTTON
63
Yellow Key
R/C BUTTON
61
Blue Key
R/C BUTTON
7B
TILE
R/C BUTTON
76
ARC (4:3)
Discrete IR Code
77
ARC (16:9)
Discrete IR Code
AF
ARC (ZOOM)
Discrete IR Code
ARC (MARK)
R/C BUTTON
(Discrete IR Code)
79
99
ON/OFF
R/C BUTTON
)
Auto Config.
R/C BUTTON
R/C BUTTON
R/C BUTTON
(Discrete IR Code)
B1
R/C BUTTON
B0
R/C BUTTON
BA
R/C BUTTON
8F
R/C BUTTON
8E
R/C BUTTON
ENG
ENGLISH
Code (Hexa)
95
58
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
CONTROLLING THE MULTIPLE PRODUCT
Use this method to connect several products to a single PC. You can control several products at a
yy
time by connecting them to a single PC.
In the Option menu, Set ID must be between 1 and 255 without being duplicated.
yy
Connecting the Cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
yy
product on/off, select an input source or adjust the OSD menu from your PC.
Monitor 1
PC
Monitor 2
Monitor 3
Monitor 4
RS-232C Cable (not included)
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
PC
D-Sub 9
(Female)
Set
D-Sub 9
(Female)
Communication Parameter
Baud Rate: 9600 BPS
yy
Data Length: 8 bit
yy
Parity Bit: None
yy
Stop Bit: 1bit
yy
Flow Control: None
yy
Communication Code: ASCII code
yy
Use a crossed (reverse) cable
yy
3-Wire Configurations (Not Standard)
PC
D-Sub 9
(Female)
Set
D-Sub 9
(Female)
CONTROLLING THE MULTIPLE PRODUCT
59
Command reference list
DATA
(Hexadecimal)
2
01. Power
k
a
00 to 01
02. Input Select
x
b
Refer to ‘Input Select.’
03. Aspect Ratio
k
c
Refer to ‘Aspect Ratio.’
04. Energy Saving
j
q
Refer to ‘Energy Saving.’
05. Picture mode
d
x
Refer to ‘Picture mode.’
06. Contrast
k
g
00 to 64
07. Brightness
k
h
00 to 64
08. Sharpness
k
k
00 to 64
09. Color
k
i
00 to 64
10. Tint
k
j
00 to 64
11. Color Temperature
x
u
00 to 64
12. H Position
f
q
00 to 64
13. V Position
f
r
00 to 64
14. H Size
f
s
00 to 64
15. Auto configuration
j
u
01
16. Balance
k
t
00 to 64
17. Sound mode
d
y
Refer to ‘Sound mode.’
18. Treble
k
r
00 to 64
19. Bass
k
s
00 to 64
20. Speaker
d
v
00 to 01
21. Volume Mute
k
e
00 to 01
22. Volume Control
k
f
00 to 64
23. Time 1(Years/ Months/ Days)
f
a
Refer to ‘Time 1.’
24. Time 2(Hours/ Minutes/Seconds)
f
x
Refer to ‘Time 2.’
25. Off Timer(Repeat mode/ Time)
f
e
Refer to ‘Off Timer.’
26. On Timer(Repeat Mode/ Time)
f
d
Refer to ‘On Timer.’
27. On Timer Input
f
u
Refer to ‘On Timer Input.’
28. Sleep Time
f
f
00 to 08
29. Power On Delay
f
h
00 to 64
30. Automatic Standby
m
n
00 to 01
31. Auto Off
f
g
00 to 01
32. Language
f
i
Refer to ‘Language.’
33. Power Indicator(Standby Light)
f
o
00 to 01
34. Power Indicator(Power Light)
f
p
00 to 01
35. ISM mode
j
p
Refer to ‘ISM Method.’
m
i
00 to 02
36. Fail Over Select
ENG
ENGLISH
COMMAND
1
60
CONTROLLING THE MULTIPLE PRODUCT
COMMAND
ENGLISH
ENG
DATA
(Hexadecimal)
1
2
m
j
Refer to ‘Fail Over Input Select.’
38. Reset
f
K
00 to 02
39. Tile Mode
d
d
00 to 01
40. Tile Mode Check
d
z
FF
41. Tile ID
d
i
Refer to ‘Tile ID.’
42. Tile H Position
d
e
00 to 32
43. Tile V Position
d
f
00 to 32
44. Tile H Size
d
g
00 to 32
45. Tile V Size
d
h
00 to 32
46. Natural Mode (In Tile mode)
d
j
00 to 01
47. DPM Select
f
j
00 to 01
48. FAN Control
d
o
00 to 03
49. FAN Fault Check
d
w
FF
50. Temperature Value
d
n
FF
51. Remote Lock/ key Lock
k
m
00 to 01
52. Key
m
c
Refer to ‘Key.’
53. OSD Select
k
l
00 to 01
54. Elapsed time return
d
l
FF
55. Serial No. Check
f
y
FF
56. S/W Version
f
z
FF
57. White Balance Red Gain
j
m
00 to FE
58. White Balance Green Gain
j
n
00 to FE
59. White Balance Blue Gain
j
o
00 to FE
60. Backlight
m
g
00 to 64
61. PC Power Control
d
t
00 to 01
62. PC Power
d
s
00 to 01
63. Easy Brightness Control Mode
m
s
v
00 to 01
65. Status check
s
s
s
66. BLU Maintenance
m
t
00 to 01
67. Screen mute
k
s
d
d
00 to 01
37. Fail Over Input Select
64. Easy Brightness Control Schedule
68. Daylight Saving
Refer to ‘Easy Brightness Control Schedule.’
Refer to ‘Status check.’
Refer to ‘Daylight Saving.’
Note : During USB operations such as Dvix or EMF, all commands except Power (k a) and Key (m c)
yy
are not executed and treated as NG.
Some commands are not supported depending on the model.
yy
The ‘f f’ command which shows the status of a certain command does not display the OSD as the
yy
result in order to be compatible with SuperSign program.
CONTROLLING THE MULTIPLE PRODUCT
61
Transmission / Receiving protocol
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command1]: First command to control the set.
* [Command2]: Second command to control the set.
* [Set ID]: S
et ID with which you want to communicate. Enter [Set ID] = ‘00(0 x 00’ to communicate with all sets
regardless of their Set ID numbers.
* [Data]: Information passed to the set.
* [Data1]: Information passed to the set.
* [Data2]: Information passed to the set.
* [Data3]: Information passed to the set.
* [Cr]: Carriage Return. ASCII code ‘0 x 0D’.
* [ ]: ASCII code space ‘0 x 20’
Acknowledgement
[Command2][ ][Set ID][ ][OK/NG][Data][x]
* When the product receives data normally, it sends an acknowledgement (ACK) in the format above. If data is
in read mode, it indicates the data that shows the current status. If data is in read mode, it simply indicates the
data that is sent from the PC.
* If a command is sent with Set ID '00' (=0 x 00), the data is reflected to all monitor sets and they do send any
acknowledgement (ACK).
* If the data value 'FF' is sent in control mode via RS-232C, the current setting value of a function can be
checked (only for some functions).
* Some commands are not supported depending on the model.
ENG
ENGLISH
Transmission
62
CONTROLLING THE MULTIPLE PRODUCT
01. Power (Command: k a)
To control the Power On/Off the display.
ENGLISH
ENG
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Off
01 : On
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
* Only when the monitor set is fully powered on, the
Acknowledgement signal is returned properly.
* There may be a certain time of delay between the
Transmission and Acknowledgement signals.
04. Energy Saving (Command: j q)
To set the Energy Saving function.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Minimum
02: Medium
03. Maximum
04: Auto
05. Screen Off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
02. Input Select (Command: x b)
To select the Input Source for display.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data
20: Input (AV)
40: Component
60: RGB
70: DVI-D(PC)
80: DVI-D(DTV)
90: HDMI(HDMI1)(DTV)
A0: HDMI(HDMI1)(PC)
C0: Display Port(DTV)
D0: Display Port(PC)
91: HDMI2/SDI(DTV)
A1: HDMI2/SDI(PC)
B0: SuperSign
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
05. Picture Mode (Command: d x)
To select the Picture Mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data
00: Vivid
01: Standard
02. Cinema
03. Sport
04: Game
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
* Some input signals may not be supported
depending on the model.
03. Aspect Ratio (Command: k c)
To adjust the screen format.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3
02: 16:9
04: Zoom
(AV, Component, HDMI/ DVI-D/ Display Port DTV)
09: Just scan (720p or more)
(Component, HDMI/ DVI-D/ Display Port DTV)
* RGB, DVI-D, HDMI/Display Port PC mode (1:1)
10 to 1F: Cinema Zoom 1 to 16
(AV, Component, HDMI/ DVI-D/ Display Port DTV)
* Available data types differ depending on the input
signal. For more information, see the aspect ratio
section of the owner's manual.
* The aspect ratio may differ depending on the
model's input configuration.
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
To adjust the screen contrast.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Contrast 0 to 100
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
07. Brightness (Command: k h)
To adjust the screen brightness.
Data 00 to 64: Brightness 0 to 100
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
08. Sharpness (Command: k k)
To adjust the screen sharpness.
* This function is available only in AV/Component
input.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Sharpness 0 to 100
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i)
To adjust the screen color.
* This function is available only in AV/Component
input.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Color 0 to 100
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
10. Tint (Command: k j)
To adjust the screen tint.
* This function is available only in AV/Component
input.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Tint R50 to G50
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
11. Color Temperature (Command: x u)
To adjust the screen Color Temperature.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Warm 50 to Cool 50
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
12. H Position (Command: f q)
To adjust the screen Horizontal Position.
* This function is available only when the Tile Mode is
set to Off.
* The operational range varies depending on the
RGB input resolution.
(Only available for RGB-PC input.)
Transmission
[f][q][ ][Set ID][ ][Data][Cr]
Data 00 to 64: min. -50 (Left) to max. 50 (Right)
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
63
64
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
13. V Position (Command: f r)
To adjust the screen Vertical Position.
* This function is available only when the Tile Mode is
set to Off.
* The operational range varies depending on the
RGB input resolution.
(Only available for RGB-PC input.)
Transmission
[f][r][ ][Set ID][ ][Data][Cr]
16. Balance (Command: k t)
To adjust the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Left 50 to Right 50
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
Data 00 to 64: min. -50 (Bottom) to max. 50 (Top)
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
14. H Size (Command: f s)
To adjust the screen Horizontal Size.
* This function is available only when the Tile Mode is
set to Off.
* The operational range varies depending on the
RGB input resolution.
(Only available for RGB-PC input.)
Transmission
[f][s][ ][Set ID][ ][Data][Cr]
Data 00 - 64: Min. -50 (Reduce) - Max. 50 (Expand)
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
15. Auto Configuration (Command: j u)
To adjust the picture position and minimize image
shaking automatically.
(Only available for RGB-PC input.)
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 01 : Set
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
17. Sound Mode (Command: d y)
To select the Sound Mode.
Transmission
[d][y][ ][Set ID][ ][Data][Cr]
Data
01: Standard
02: Music
03: Cinema
04: Sport
05. Game
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
18. Treble (Command: k r)
To adjust the Treble values.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Treble 0 to 100
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
19. Bass (Command: k s)
To adjust the Bass values.
Data 00 to 64: Bass 0 to 100
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
20. Speaker (Command: d v)
To select the speaker on/off.
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
Data00: Off
01: On
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
22. Volume Control (Command: k f)
To set the playback volume.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Volume 0 to 100
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
23. Time 1(Year/ Month/ Day) (Command: f a)
To set the Time 1(Year/ Month/ Day) values.
Transmission
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data 100 to 14: 2010 to 2030
Data 201 to 0C: January to December
Data 301 to 1F: 1 to 31
* Enter “fa [Set ID] ff” for checking Time 1(Year/
Month/ Day) values.
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
21. Volume Mute (Command: k e)
To control the Volume Mute on/off.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Mute (Volume Off)
01 : Current volume (Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
24. Time 2(Hour/ Minute/ Second) (Command: f x)
To set the Time 2(Hour/ Minute/ Second) values.
Transmission
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1 00 to 17: 00 to 23 hours
Data2 00 to 3B: 00 to 59 minutes
Data3 00 to 3B: 00 to 59 seconds
* Enter “fx [Set ID] ff” for checking Time 2(Hour/
Minute/ Second) values.
** This command won’t work if Time 1(Year/ Month/
Day) has not been set in advance.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
ENG
ENGLISH
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
65
66
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
25. Off Timer(Repeat Mode/ Time) (Command: f e)
To set the Off Timer(Repeat Mode/ Time) function.
26. On Timer(Repeat Mode/ Time) (Command: f d)
To set the On Timer(Repeat mode/ Time) function.
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. F1 to F7 (Read data)
F1: Read the 1st Off Time data
F2: Read the 2nd Off Time data
F3: Read the 3rd Off Time data
F4: Read the 4th Off Time data
F5: Read the 5th Off Time data
F6: Read the 6th Off Time data
F7: Read the 7th Off Time data
2. E1-E7 (Delete one index), E0 (Delete all indexes)
E0: Delete all Off Time data
E1: Delete the 1st Off Time data
E2: Delete the 2nd Off Time data
E3: Delete the 3rd Off Time data
E4: Delete the 4th Off Time data
E5: Delete the 5th Off Time data
E6: Delete the 6th Off Time data
E7: Delete the 7th Off Time data
3. 01 to 0C (Set the day of week for Off Time)
00: Off
01: Once
02. Daily
03: Monday to Friday
04: Monday to Saturday
05: Saturday to Sunday
06. Sunday
07. Monday
08. Tuesday
09. Wednesday
0A. Thursday
0B. Friday
0C. Saturday
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* To read or delete the Off Time list, set FFH for
[Data2] and [Data3].
(Example 1: fe 01 f1 ff ff - Read the 1st Off Time
data.)
(Example 2: fe 01 e1 ff ff - Delete the 1st Off Time
data.)
(Example 3: fe 01 04 02 03 - Set the Off Time to
"Monday to Saturday, 02:03".)
* This function is supported only when 1 (Year/Month/
Day) and 2 (Hour/Minute/Second) are set.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
1. F1 to F7 (Read data)
F1: Read the 1st On Time data
F2: Read the 2nd On Time data
F3: Read the 3rd On Time data
F4: Read the 4th On Time data
F5: Read the 5th On Time data
F6: Read the 6th On Time data
F7: Read the 7th On Time data
2. E1-E7 (Delete one index), E0 (Delete all indexes)
E0: Delete all On Time data
E1: Delete the 1st On Time data
E2: Delete the 2nd On Time data
E3: Delete the 3rd On Time data
E4: Delete the 4th On Time data
E5: Delete the 5th On Time data
E6: Delete the 6th On Time data
E7: Delete the 7th On Time data
3. 01 to 0C (Set the day of week for On Time)
00: Off
01: Once
02. Daily
03: Monday to Friday
04: Monday to Saturday
05: Saturday to Sunday
06. Sunday
07. Monday
08. Tuesday
09. Wednesday
0A. Thursday
0B. Friday
0C. Saturday
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* To read or delete the Off Time list, set FFH for
[Data2] and [Data3].
(Example 1: fd 01 f1 ff ff - Read the 1st On Time
data.)
(Example 2: fd 01 e1 ff ff - Delete the 1st On Time
data.)
(Example 3: fd 01 04 02 03 - Set the On Time to
"Monday to Saturday, 02:03".)
* This function is supported only when 1 (Year/Month/
Day) and 2 (Hour/Minute/Second) are set.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[f][u][ ][Set ID][ ][Data1][Cr]
[f][u][ ][Set ID][ ][Data1][Data2][Cr]
Data (Add schedule)
20: Input (AV)
40: Component
60. RGB
70: DVI-D
90: HDMI (HDMI1)
C0: Display Port
91: HDMI2/SDI
B0:SuperSign
Data1 (Change schedule)
1. F1 to F7 (Read data)
F1: Select the 1st schedule input
F2: Select the 2nd schedule input
F3: Select the 3rd schedule input
F4: Select the 4th schedule input
F5: Select the 5th schedule input
F6: Select the 6th schedule input
F7: Select the 7th schedule input
Data2
20: Input (AV)
40: Component
60: RGB
70: DVI-D
90: HDMI (HDMI1)
C0: Display Port
91: HDMI2/SDI
B0:SuperSign
* To read the schedule input, enter FFH for [Data2].
If no schedule is available for [Data1] when
attempting to read or change the schedule data, the
text NG will be displayed and the operation fails.
(Example 1: fu 01 60 - Move each schedule input
down one row and save the 1st schedule input in
RGB mode.)
(Example 2: fu 01 f1 ff - Read the 1st schedule
input.)
(Example 3: fu 01 f3 20 - Change the 3rd data
schedule input to the current On Time and AV input.
If there is no third schedule, the text NG will be
displayed and the operation fails.)
* This function is supported only when 1 (Year/
Month/Day), 2 (Hour/Minute/Second), On Time
(Repeat Mode/Time) are set.
** It may not be supported depending on the model.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]
28. Sleep Time (Command: f f)
To set the Sleep Time.
Transmission
[f][f][ ][Set ID][ ][Data][Cr]
Data
00: Off (Sleep Timer off)
01: 10 min.
02: 20 min.
03: 30 min.
04: 60 min.
05: 90 min.
06: 120 min.
07: 180 min.
08: 240 min.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
29. Power On Delay (Command: f h)
To set the schedule delay when the power is turned
on. (Unit: Second)
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: min. 0 to max. 100 (sec.)
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
30. Automatic Standby (Command: m n)
To set the Automatic Standby function.
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
Data 00: Off (No off after 4 hours)
01: 4 Hours (Off after 4 hours)
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
27. On Timer Input (Command: f u)
To select an external input for the current On Time
setting and add a new schedule or change the
existing schedule.
67
68
CONTROLLING THE MULTIPLE PRODUCT
31. Auto Off (Command: f g)
To set the Auto Off function.
ENGLISH
ENG
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
Data 00: Off (No off after 15 minutes)
01: 15 min.(Off after 15 minutes)
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
32. Language (Command: f i)
To set the language for OSD.
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Data
00: Czech
01: Danish
02: German
03: English
04: Spanish (EU)
05: Greek
06: French
07: Italian
08: Dutch
09: Norwegian
0A: Portuguese
0B: Portuguese (BR)
0C: Russian
0D: Finnish
0E: Swedish
0F: Korean
10: Chinese (Mandarin)
11: Japanese
12: Yue Chinese (Cantonese)
34. Power Indicator (Power Light) (Command: f p)
To set the Power Indicator (Power Light) function.
Transmission
[f][p][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
** It may not be supported depending on the model.
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
35. ISM mode (Command: j p)
To select ISM method for avoiding having a fixed
image remain on screen.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data
01: Inversion
02: Orbiter
04: White Wash
08. Normal
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
33. Power Indicator (Standby Light) (Command: f o)
To set the Power Indicator (Standby Light) function.
Transmission
[f][o][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
** It may not be supported depending on the model.
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
36. Fail Over Select (Command: m i)
To set the Fail Over function.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: Auto
02: Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[ ][Data4][ ][Data5][Cr]
Data 1 to 5 (Priority 1 to 5)
60: RGB
70: DVI-D
90: HDMI(HDMI1)
C0: Display Port
91: HDMI2/SDI
* The number of data items differs depending on the
model.
40. Tile Mode Check (Command: d z)
To check Tile Mode status.
Transmission
[d][z][ ][Set ID][ ][Data][Cr]
Data FF: Check Tile Mode status.
** It may not be supported depending on the model.
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
Data2
Data3
00: Tile Mode Off
01: Tile Mode On
00 to 0F: Tile Row
00 to 0F: Tile Column
Acknowledgement
[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4]
[ ][Data5][x]
41. Tile ID (Command: d i)
To set Tile ID.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
38. Reset (Command: f k)
To execute the Picture, Screen, Audio and Factory
reset function.
(Screen Reset can only be performed in RGB input
mode.)
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data
Data 01 to E1: Tile ID 01 to 225**
FF: Check Tile ID
** Data could not be set over (Tile Column) x (Tile
Row).
** It may not be supported depending on the model.
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
*NG will be return if data is over (Tile Column) x (Tile
Row), except 0xFF.
00: Picture Reset
01: Screen Reset
02: Factory Reset
03: Audio Reset
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
42. Tile H Position (Command: d e)
To adjust the Tile Horizontal position.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
39. Tile Mode (Command: d d)
To set a Tile Mode and Tile Column/ Row values.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data 00 to FF: 1st byte - Tile Row
2nd byte - Tile Column
*00, 01, 10, 11 means Tile Mode Off
** It may not be supported depending on the model.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
Data 00 to 32: -50 (Left) to 0 (Right)
*Left/Right values depend on Tile H size.
** It may not be supported depending on the model.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
37. Fail Over Input Select (Command: m j)
To select the input source for auto switch.
* This command is only available when the fail over
(auto) mode is set to Custom.
69
70
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
43. Tile V Position (Command: d f)
To adjust the Tile Vertical position.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
Data 0 to 32: 0 (Bottom) to 50 (Top)
* Bottom/Top values depend on Tile Vertical size.
** It may not be supported depending on the model.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
44. Tile H Size (Command: d g)
To adjust the Tile Horizontal Size.
*Set Tile H Position to 0x32 before setting Tile H
Size.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
Transmission
[d][g][ ][Set ID][ ][Data][Cr]
Data 00 to 32: 0 to 50
** It may not be supported depending on the model.
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
46. Natural Mode (In Tile Mode) (Command : d j)
To display the image naturally, the part of the image
that would normally be displayed in the gap between
the monitors is omitted.
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
47. DPM Select (Command: f j)
To set the DPM (Display Power Management)
function.
Transmission
[f][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
* Data settings may vary depending on your model
as below.
Data 00: Off
01: 5 sec.
02: 10 sec.
03: 15 sec.
04: 1 min.
05: 3 min.
06: 5 min.
07: 10 min.
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
45. Tile V Size (Command: d h)
To adjust the Tile Vertical size.
*Set Tile V Position to 0x00 before setting Tile V
Size.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
Transmission
[d][h][ ][Set ID][ ][Data][Cr]
Data 00 to 32: 0 to 50
** It may not be supported depending on the model.
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
48. FAN Control (Command : d o)
To set the Fan mode.
Transmission
[d][o][ ][Set ID][ ][Data][Cr]
Data 00: Auto
01: On
02: Manual
03: Off
** It may not be supported depending on the model.
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
49. FAN Fault Check (Command: d w)
To check the fan errors.
Data FF: Read the status
Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Fan fault
01: Fan OK
02: Model without a Fan
50. Temperature Value (Command: d n)
To check the inside temperature value.
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
Data FF: Check the status
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
[n][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
52. Key (Command: m c)
To send a key code of the IR remote control.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
DataIR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
For a key code, see the IR Code.
* Some key codes are not supported depending on
the model.
53. OSD Select (Command: k l)
To select OSD(On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* Temperature is displayed in hexadecimal.
51. Remote Controller Lock/ Key Lock
(Command: k m)
When the remote control and front keys are locked in
standby mode, the power cannot be turned on using
the remote control or front power button.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 00: Off (Lock Off)
01: On (Lock On)
* Display will not be turned on by power on key of
remote controller and front panel control keys, if key
is locked on in standby mode.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
54. Elapsed time return (Command: d l)
To check the panel used time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data FF: Read the status
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* Returned data means used hours in hexadecimal.
ENG
ENGLISH
Transmission
[d][w][ ][Set ID][ ][Data][Cr]
71
72
CONTROLLING THE MULTIPLE PRODUCT
55. Serial No.Check (Command: f y)
To check the Serial Numbers.
ENGLISH
ENG
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data FF: Check the product Serial Number
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
* Data is ASCII code.
56. S/W Version (Command: f z)
To check the Software Version.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data FF: Check the Software version
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
58. White Balance Green Gain (Command: j n)
To set the White Balance Green Gain.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Green Gain 0 to 254
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
* Using the remote control, you can adjust the value
from 0 to 255. With RS232C, you can adjust the
value from 0 to 254.
59. White Balance Blue Gain (Command: j o)
To set the White Balance Blue Gain.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Blue Gain 0 to 254
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
* Using the remote control, you can adjust the value
from 0 to 255. With RS232C, you can adjust the
value from 0 to 254.
57. White Balance Red Gain (Command: j m)
To set the White Balance Red Gain.
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Red Gain 0 to 254
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
* Using the remote control, you can adjust the value
from 0 to 255. With RS232C, you can adjust the
value from 0 to 254.
60. Backlight (Command: m g)
To adjust the screen backlight.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Backlight 0 to 100
Acknowledgement
[g][][set ID][][OK/NG][Data][x]
** It may not be supported depending on the model.
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[d][t][ ][Set ID][ ][Data][Cr]
Data
00: Synchronized (When the monitor is off, the PC is
also turned off.)
01: Not synchronized (The monitor is off but the PC
is on.)
02: Maintain the power-on state of the PC. (When
you turn on the monitor while the Media Player is
turned off, the Media Player is turned on.)
** It may not be supported depending on the model.
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
62. PC Power (Command: d s)
Control the PC power.
Transmission
[d][s][ ][Set ID][ ][Data][Cr]
Data 00: PC is turned off.
01: PC is turned on.
** It may not be supported depending on the model.
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
64. Easy Brightness Control Schedule (Command: s
s)
Sets the Easy Brightness Control Schedule.
Transmission
[s][s][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. F1 - F6 (Data Reading Functions)
F1: Reads the data of the 1st Easy Brightness
Control
F2: Reads the data of the 2nd Easy Brightness
Control
F3: Reads the data of the 3rd Easy Brightness
Control
F4: Reads the data of the 4th Easy Brightness
Control
F5: Reads the data of the 5th Easy Brightness
Control
F6: Reads the data of the 6th Easy Brightness
Control
2. E1-E6 (Deletes One Index), E0 (Delete All
Indexes)
E0: Deletes all Easy Brightness Controls
E1: Deletes the 1st Easy Brightness Control
E2: Deletes the 2nd Easy Brightness Control
E3: Deletes the 3rd Easy Brightness Control
E4: Deletes the 4th Easy Brightness Control
E5: Deletes the 5th Easy Brightness Control
E6: Deletes the 6th Easy Brightness Control
3. 00-17: 00 - 23:00
Data2 00-3B: 00 - 59 minutes
Data3 00-64: backlight 0 - 100
* To read or delete the configured Easy Brightness
Control list, set [Data2][Data3] to FF.
(ex1: ss 01 f1 ff ff - Reads the 1st index data from the
Easy Brightness Control.
ex2: ss 01 e1 ff ff - Deletes the 1st index data from
the Easy Brightness Control.
ex3: ss 01 07 1E 46 - Adds a schedule to the
backlight 70 at 07:30.)
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
** It may not be supported, depending on the model.
63. Easy Brightness Control Mode (Command: s m)
Selects ON/OFF of Easy Brightness Control Mode.
Transmission
[s][m][ ][Set ID][ ][Data][Cr]
Data 00: Easy Brightness Control OFF
01: Easy Brightness Control ON
* It does not work if the current time is not set up.
** It may not be supported, depending on the model.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
61. PC Power Control (Command: d t)
To control the PC power if the PC and the monitor
are synchronized.
73
74
CONTROLLING THE MULTIPLE PRODUCT
65. Status check (Command: s v)
Check various statuses.
ENGLISH
ENG
Transmission
[s][v][ ][Set ID][ ][Data][ ][FF][Cr]
Data 05: Check the normal operation of No.1 and
No.2 luminance sensors.
06: luminance sensor being used:
07: Check the normal operation of top, bottom,
or main temperature sensors.
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][Data1][x]
66. BLU Maintenance (Command: m t)
Select ON/OFF of BLU Maintenance.
Transmission
[m][t][ ][Set ID][ ][Data][Cr]
Data 00: BLU Maintenance OFF
01: BLU Maintenance ON
** It may not be supported, depending on the model.
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
When the Data is 05
Data100: All normal
01: BLU sensor 1 normal, BLU sensor 2 fail
02: BLU sensor 1 fail, BLU sensor 2 normal
03: All fail
When the Data is 06
Data100: No.1 luminance sensor is being used
01: No.2 luminance sensor is being used
When the Data is 07
Data100: All temperature sensors fail
01: Top normal, Bottom fail, Main fail
02: Top fail, Bottom normal, Main fail
03: Top normal, Bottom normal, Main fail
04: Top fail, Bottom fail, Main normal
05: Top normal, Bottom fail, Main fail
06: Top fail, Bottom normal, Main fail
07: All temperature sensors normal
67. Screen mute (Command: k d)
Turns the screen on or off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00: Turns the screen on.
01: Turns the screen off.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]]
When the Data is 08
Acknowledgement
[v][ ][SetID][ ][OK/NG][Data][Data1][Data2][Data3][x]
Data1: Temperature of the top sensor area when the
set is powered off.
Data2: Temperature of the bottom sensor area when
the set is powered off.
Data3: Temperature of the main sensor area when
the set is powered off.
When the Data is 09
Acknowledgement
[v][ ][SetID][ ][OK/NG][Data][Data1][Data2][x]
Data1 00-ff: Upper 2-byte of Fan Speed
Data2 00-ff: Lower 2-byte of Fan Speed
Fan Speed: Hex 0-20D0, Decimal 0-8400
** It may not be supported, depending on the model.
68. Daylight Saving (Command: s d)
To set the Daylight saving function.
Transmission
[s][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4]
[ ][Data5][Cr]
Data 00: Off (Data2~5: FFH)
01: Start Time
02: End Time
Data2 01~0C: January to December
Data3 01~06: 1 ~ 6th week
* The maximum number of [Data3] differs depending
on Date.
Data4 00~06 ( Sun. ~ Sat. )
Data5 00~17: 00 ~ 23 hours
* To read the Start Time/End Time, enter FFH for
[Data2]~[Data5].
(ex1: sd 01 01 ff ff ff ff - To check the Start Time
ex2: sd 01 02 ff ff ff ff - To check the End Time)
* This function is supported only when 1 (Year/Month/
Day) and 2 (Hour/Minute/Second) are set.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][Data4]
[Data5][x]
** It may not be supported depending on the model.
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping, and handling)
upon email request to opensource@lge.com.
This offer is valid for three (3) years from the
date on which you purchased the product.
WARNING -This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be required
to take adequate measures.
Temporary noise is normal when powering ON or
OFF this device.
Download PDF