LG | M4630CCBA | LG M4630CCBA Owner’s Manual

ENGLISH
OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating
your set and retain it for future reference.
MONITOR SIGNAGE MODELS
M4630C
www.LGsolutions.com
Table of Contents
Table
Accessories................................................................................ 3
Installing a Bracket.................................................................... 4
Portrait Mode.............................................................................. 5
Installing a Wall Mount............................................................... 6
Using the Remote Control......................................................... 7
Connections................................................................................ 8
Connecting to External Devices............................................... 9
Connecting to a PC..............................................................................................................9
Daisy Chaining Monitors.....................................................................................................11
Video Input............................................................................................................................13
Component Input (480i/480p/576i/576p/720p/1080i).......................................................14
HDMI Input (480p/576p/720p/1080i)...................................................................................15
User Menus............................................................................... 16
Screen Adjustment Options...............................................................................................16
OSD Menu ............................................................................................................................17
Adjusting the OSD (On Screen Display)...........................................................................18
Adjusting the Screen Automatically..................................................................................18
Adjusting the Screen Color................................................................................................19
Adjusting the Audio.............................................................................................................24
Selecting Options.................................................................................................................26
Screen Tiling Options..........................................................................................................27
Troubleshooting....................................................................... 30
Specifications ......................................................................... 33
Controlling Multiple Products.................................................A1
Note
Below three points can be visible on the screen due to the special nature of Super Narrow LCD.
This is not a malfunction of the LCD.
1. The Edge area of the screen can look darker than the center area.
2. Light leakage may be visible depending on the view.
3. Sheet guide boss & clips may be visible at the edge of the screen depending on the view.
2
Accessories
Thank you for your purchase. Please check the product as well as the accessories shown below
❖ Note that the accessories may look different from those shown here.
VOL-
ENTER
VOL-
MENU
MENU
EXIT
ENTER
VOL+
ENTER
VOL-
EXIT
SOURCE
MENU
ENTER
ENTER
MENU
ENTER
EXIT
SOURCE
EXIT
VOL-
VOL-
VOL-
MENU
VOL+
VOL+
SOURCE
MENU
VOL+
VOL+
VOL+
SOURCE
EXIT
EXIT
SOURCE
SOURCE
Remote Control /
Batteries
VOL-
MENU
ENTER
EXIT
D-Sub Signal Cable
Power Cable
Manual
VOL+
SOURCE
Manual
Manual
Manual
Manual
VOL-
MENU
ENTER
EXIT
Manual
VOL+
SOURCE
Manual
HDMI Cable
HDMI-DVI Cable
CD-ROM / Cards
Manual
Bolt (16 Unit)
Bracket
3
Installing a Bracket
4
Portrait Mode
- Only on some models.
"When installing in portrait mode, rotate the monitor clockwise."
5
Installing a Wall Mount
※ The wall mount below is optional.
Horizontal adjustment screw
Note
● Only install the product on a vertical wall.
● To ensure product performance and avoid damage, it is strongly recommended that you avoid
the following installation locations:
- Near the sprinkler sensor
- Near the heater
- Where vibration or shock may occur
- Near high-tension wires
● Use an appropriate installation method for the material of the wall. Check the safety of the wall
surface first and reinforce the wall if the wall strength is not enough for installation.
● Do not install the wall mount inside the wall.
6
Using the Remote Control
Remote Control Buttons
1 Power On / Off
2 Volume, Function (◄, ►)
Function (▲, ▼)
1
2
VOL-
ENTER
3 ENTER
Completes the setting of the function.
VOL+
3
4
MENU
EXIT
SOURCE
4 MENU
Sets the function of the product.
6
5 EXIT
Exits the menu.
5
6 SOURCE
Selects the input signal.
Inserting batteries into the remote control.
AAA Type
1. Slide off the battery cover.
2. Insert the batteries with correct polarity ( + / - ).
3. Close the battery cover.
4. To remove the batteries, perform the installation
actions in reverse.
• Dispose of used batteries in the recycle bin to prevent
environmental pollution.
7
Connections
* The product image in the user's guide could be different from the actual image.
Rear View
16
5
SPEAKER-OUT
POWER
ON/OFF
POWER
ON/OFF
SPEAKER-OUT
POWER
ON/OFF
HDMI-IN
DVI-OUT
HDMI-IN
DVI-OUT
HDMI-IN
17
8
RS 232C-OUT
RGB-IN
SPEAKER-OUTUPGRADE
UPGRADE
RGB-IN
UPGRADE
RGB-IN
RS 232C-OUT
RGB-OUT
RS 232C-IN
RGB AUDIO-IN
RGB-OUT
RGB AUDIO-IN
DVI-OUT
RGB-OUT
RS 232C-IN
RGB AUDIO-IN
10
1
3
4
6
7
9
Y
Pb
Pr
COMPONENT-OUT
AV AUDIO-IN
AV-OUT
COMPONENT-OUT
RS 232C-IN
AV-OUT
Y COMPONENT-OUT
Pb
Pr
AV AUDIO-IN
AV-OUT
Y
Pb
Pr
Pb
11
Pr
13
1 Power Connector: Connect the power cord.
2 AC Power Button: Press this button to turn on the power. Press this button again to turn it off.
3 HDMI Input Port
4 DVI Output Port
5 RGB Input Port
6 RGB Output Port
7 PC AUDIO Input Port
8 RS-232C Output Port
9 RS-232C Input Port
10 COMPONENT Input Port
11 COMPONENT Output Port
12 AV Input Port
13 AV Output Port
14 COMPONENT AUDIO-IN Port
15 AV AUDIO-IN Port
16 Speaker Port
17 UPGRADE Port: this port is used for upgrade service and not for general users.
8
14
COMPONENT-IN
COMPONENT AUDIO-IN
AV-IN
COMPONENT-IN
COMPONENT AUDIO-IN
AV-IN
RS 232C-OUT
Y
Pb
Pr
COMPONENT-IN
COMPONENT AUDIO-IN
AV-IN
Y
Pb
Pr
Y
2
12
15
AV AUDIO-IN
Connecting to External Devices
Connecting
RGB-IN to a PC
Check that the computer, product and the peripherals are turned off.
Then, connectRGB-IN
the signal input cable.
A When connecting with the D-sub signal input cable.
B When connecting with the HDMI to DVI signal input cable (not included).
* When HDMI PC is used, a compatiblity problem might occur.
RGB-IN
A
RGB-IN
PC
Rear sideRGB-IN
of the product
PC / MAC
RGB-IN
HDMI-IN
B
MAC
Macintosh Adapter (not included)
Use the standard Macintosh adapter since an incompatible adapter that
uses a different signaling system is available on the market.
HDMI-IN
Rear side of the product
PC
RGBHDMI-IN
AUDIO-IN
* Use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain
standard compliance with your monitor.
RGB AUDIO-IN
Connect the Audio cable.
Audio Cable
(not included)
RGB AUDIO-IN
Rear side of the product
PC
Connect the power cord.
Rear side of the product
9
Connecting to External Devices
1 Press the power button on the back of the monitor.
Power button
Select an input signal.
Press SOURCE on the remote control to select the input signal.
SOURCE
▼▲
ENTER
Or, press SOURCE on the back of the product.
SOURCE
▼▲
SELECT
A
When connecting with a D-sub signal input cable.
• Select RGB: 15 - pin D-sub analog signal.
B
Connecting with an HDMI to DVI Signal Input Cable
• Select HDMI / DVI: HDMI to DVI Digital signal.
Input list
Input list
RGB
HDMI/DVI
AV
Component
RGB
HDMI/DVI
AV
Component
Move
Turn on the PC.
10
Enter
Move
Enter
Connecting to External Devices
Daisy Chaining Monitors
To connect multiple monitors to the PC in RGB mode
15 - pin D-sub Signal Cable
Product 2
Product 1
PC
Product 3
Product 4
To connect multiple monitors to the TV in AV mode
AV-IN
AV-OUT
COMPONENT AUDIO-IN
AV-IN
AV AUDIO-IN
AV-OUT
COMPONENT AUDIO-IN
AV-IN
AV AUDIO-IN
AV-OUT
COMPONENT AUDIO-IN
AV AUDIO-IN
AV-IN
COMPONENT AUDIO-IN
AV-IN
COMPONENT AUDIO-IN
AV-IN
COMPONENT AUDIO-IN
AV-OUT
AV AUDIO-IN
AV-OUT
AV AUDIO-IN
AV-OUT
AV AUDIO-IN
VIDEO/TV
BNC Cable
(not included)
Product 2
Product 1
Product 3
11
HDMI-IN
DVI-OUT
HDMI-IN
DVI-OUT
HDMI-IN
DVI-OUT
Connecting to External Devices
To connect multiple monitors to the PC in HDMI mode
PC
HDMI-IN
DVI-OUT
HDMI-IN
DVI-OUT
HDMI-IN
DVI-OUT
HDMI Cable
Product 2
Product 1
Product 3
To connect multiple monitors to the PC in Component mode
Component Cable
(not included)
VIDEO/TV
COMPONENT-IN
Y
Pb
COMPONENT-OUT
Y
Pb
COMPONENT-IN
AV-IN
Pr
Y
AV-IN
Pr
COMPONENT-OUT
AV-OUT
Pr
Y
Pb
COMPONENT-IN
Y
AV-OUT
Pr
Product 2
Product 1
Note
Pb
Pb
AV-IN
Pr
COMPONENT-OUT
Y
Pb
AV-OUT
Pr
Product 3
• When multi-connecting in / out cascade format, loss of display quality can happen.
We recommend using a cable distributor.
• When connecting multiple products with component inputs, we recommend that you use
high performance component cables for brighter and clearer picture quality.
12
Connecting to External Devices
Video Input
Connect the video cable as shown in the below figure and then connect the power cord
A Connecting with a BNC Cable.
• Connect the input terminal with a proper color match.
Product
AV-IN
COMPONENT AUDIO-IN
AV-IN
COMPONENT AUDIO-IN
AV-OUT
AV AUDIO-IN
AV-OUT
AV AUDIO-IN
Audio Cable
(not included)
BNC Cable
(not included)
VCR / DVD Receiver
Select an input signal.
Press SOURCE on the remote control to select the input signal.
SOURCE
▼▲
ENTER
Or, press SOURCE on the back of the product.
SOURCE
A
▼▲
Input list
SELECT
RGB
HDMI/DVI
AV
Component
When connecting with an BNC cable.
• Select AV.
Move
13
Enter
Connecting to External Devices
Component Input (480i/480p/576i/576p/720p/1080i)
Connect the video / audio cable as shown in the below figure and then, connect the power
cord.
• Connect the input terminal with a proper color match.
Product
COMPONENT-IN
Y
Pb
AV-IN
COMPONENT-OUT
Y
Pb
COMPONENT AUDIO-IN
COMPONENT-IN
Pr
Y
AV-OUT
AV AUDIO-IN
Y
Audio Cable
(not included)
HDTV Receiver
Select an input signal.
Press SOURCE on the remote control to select the input signal.
SOURCE
▼▲
ENTER
Or, press SOURCE on the back of the product.
SOURCE
▼▲
Input list
SELECT
RGB
HDMI/DVI
AV
Component
• Select Component
Move
14
Enter
Pb
AV-IN
COMPONENT AUDIO-IN
AV-OUT
AV AUDIO-IN
Pr
COMPONENT-OUT
Pr
BNC Cable
(not included)
Pb
Pr
Connecting to External Devices
HDMI Input (480p/576p/720p/1080i)
-H
DMI Supports High Definition input and HDCP (High-bandwidth Digital Content Protection).
Some devices require HDCP in order to display HD signals.
Connect the video / audio cable as shown in the below figure and then connect the
power cord.
Product
Product
RGB-IN
RGB-IN
HDMI-IN
HDMI-IN
UPGRADE
UPGRADE
RGB-IN
RGB-IN
RGB-OUT RGB
RGB
AUDIO-IN
RGB-OUT
AUDIO-IN
HDMI to DVI
Signal Cable
HDMI-IN
HDMI-IN
RCA - PC
Audio Cable
(not included)
RGB-OUT RGB
RGB
AUDIO-IN
RGB-OUT
AUDIO-IN
HDMI Signal Cable
VCR / DVD / Set - top Box
VCR / DVD / Set - top Box
RGB-IN
RGB-IN
UPGRADE
UPGRADE
UPGRADE
UPGRADE
Note: Dolby Digital is not supported.
HDMI-IN
HDMI-IN
RGB-OUT RGB
RGB
AUDIO-IN
RGB-OUT
AUDIO-IN
Select an input signal.
Press SOURCE on the remote control to select the input signal.
SOURCE
▼▲
ENTER
Or, press SOURCE on the back of the product.
SOURCE
▼▲
SELECT
When connecting with a HDMI to DVI signal input cable.
When connecting with a HDMI signal input cable.
• Select HDMI / DVI
Note
• HDMI Audio recommend use of PCM format.
• If you select Bit stream format, it can happen audio noise.
15
Input list
RGB
HDMI/DVI
AV
Component
Move
Enter
User Menus
Screen Adjustment Options
POWER
SOURCE
MENU
3
4
5
SELECT
DOWN
6
UP
7
◄ VOL ►
8
1
1 Power LED: red for standby / green for power on.
2 IR Receiver: this is where the unit receives signals from the remote control.
3 Power: press this button to turn on the power. Press this button again to turn it off.
4 SOURCE: selects other devices connected.
5 MENU: displays or exits the menu.
6 SELECT: selects an item in the OSD menu.
7 DOWN, UP: Moves up or down in the OSD menu.
8 ◄ (Left), ► (Right): Selects an icon in the OSD menu and increases or decreases the volume.
16
2
User Menus
OSD Menu
Icon
Function Description
Adjusts screen brightness, contrast and color that you prefer.
Picture
Adjusts the audio options.
Audio
Adjusts the timer options.
Option
Adjusts the screen status according to the circumstances.
Tile
Note
OSD (On-screen Display)
The OSD function enables you to adjust the screen status with a convenient graphic interface.
17
User Menus
Adjusting the OSD (On Screen Display)
MENU
Pops up
the menu
screen
VOL-
ENTER
ENTER
VOL+
Move where
you want to
adjust
Select a
menu icon
VOL-
ENTER
ENTER
VOL+
Adjust the status
Save
adjustment
EXIT
Exit from the
menu screen.
• Use the remote control to adjust the OSD screen.
1
Press MENU, then the main menu of the OSD appears.
2
To access a control, use ▼▲.
3
When the icon you want becomes highlighted, press ENTER.
4
Use the ▼▲◄► to adjust the item to the desired level.
5
Accept the changes by pressing ENTER.
6
Exit the OSD by pressing EXIT.
Adjusting the Screen Automatically
Press SELECT (ENTER on a remote control) in the PC analog signal.
Then optimal screen settings will be selected that fit into the current
mode. If adjustment is not satisfactory, you can adjust the screen
manually.
18
[When 1360 x 768 is selected]
Auto Config
User Menus
Adjusting the Screen Color
Picture
Mode
Picture
Picture Mode
User
Color Temperature
Aspect Ratio
Noise Reduction
Film Mode
Move
:
►►
►►
:
:
:
User
Vivid
Standard
Cinema
Game
Enter
Menu
Toggles between screen presets.
• User: User-defined settings.
• Vivid: Displays a sharp image.
• Standard: This is the optimum viewing condition for general users.
• Cinema: This mode optimizes video for watching movies.
• Game: This is the mode for fast response speeds for video games.
Picture
Picture Mode
User
Color Temperature
Aspect Ratio
Noise Reduction
Film Mode
Move
:
►►
►►
:
:
:
Vivid
16 : 9
Enter
Menu
User
Brightness
Contrast
Color
Tint
Sharpness
Move
:
:
:
:
:
70
80
50
50
60
Adjust
Menu
Brightness: Adjusts the brightness of the screen.
Contrast: Adjusts the difference between light and dark levels.
Color: Adjusts the color (function works in AV and Component modes).
Tint: Adjusts the tint (function works in AV mode).
Sharpness: Adjusts the clearness of the screen (function works in Component mode).
19
User Menus
Adjusting the Screen Color
Color
Temperature
Picture
Picture Mode
User
Color Temperature
Aspect Ratio
Noise Reduction
Film Mode
Move
:
►►
►►
:
:
:
Vivid
16 : 9
Enter
Menu
Color Temperature
Color Temperature
Red
Green
Blue
Select
:
:
:
:
User
Cool2
Cool1
Medium
Warm1
Warm2
Enter
Menu
Color Settings
• User: User-defined settings.
• Cool 2,1: Slightly purple temperature.
• Medium: Slightly blue temperature.
• Warm 1, 2: Slightly red temperature.
Red / Green / Blue
Set your own color levels.
20
User Menus
Adjusting the Screen Color
Aspect Ratio
Selects the image size of the screen.
Picture
Picture Mode
User
Color Temperature
Aspect Ratio
Noise Reduction
Film Mode
Select
16 : 9
Just Scan
Zoom
4:3
14 : 9
:
►►
►►
:
:
:
Enter
Menu
16:9
Widescreen mode.
Just Scan
Displays the full signal data without cropping any of the image.
Zoom
Zoom programs are overscaned on the top/bottom and left/right sides.
4:3
Selects a 4:3 aspect ratio image.
14:9
14:9 programs are viewed normally in 14:9 with black bars added to the
top and bottom. 4:3 programs are magnified on the top/bottom and left/
right sides.
eng
ARC
Mode
ARC
Just Scan
Just Scan
Zoom
Zoom
fra
ARC
Mode
Composantes
Signal original
Zoom
ger
ARC
Just Scan
Zoom
21
Mode
Komponente
Mode
User Menus
Adjusting the Screen Color
Noise
Reduction
Picture
Picture Mode
User
Color Temperature
Aspect Ratio
Noise Reduction
Film Mode
Select
:
►►
►►
:
:
:
Off
On
Enter
Menu
• Noise Reduction: R
emoves image noise up to the point where it does not damage the
original picture (function works in AV and Component modes).
Film Mode
Picture
Picture Mode
User
Color Temperature
Aspect Ratio
Noise Reduction
Film Mode
Select
:
►►
►►
:
:
:
Off
On
Enter
Menu
• Film Mode: P
rovides the optimal picture quality for watching a movie (only available
in Component, AV 480i or 576i mode.) * If the Component or AV input
signal is 480i or 576i, this may cause a lag in playback depending on the
DVD's output mode. In this case, set "Film Mode" to "On" (function works
in AV and Component mode).
22
User Menus
Adjusting the Screen Color
Screen
Adjust the screen video (RGB input only).
Picture
Picture Mode
User
Color Temperature
Aspect Ratio
Screen
Move
:
►►
►►
:
►►
Vivid
16 : 9
Enter
Menu
Screen
Auto Config
Phase
H. Position
V. Position
Size
Resolution
Move
►►
:
:
:
:
►►
52
16
24
78
1360 x 768
Enter
Menu
Auto Config.: Automatically adjusts the screen position, clock and phase. This function is
available for analog signals only.
Phase: Adjusts the focus of the display. This allows you to remove any horizontal noise and clear
or sharpen the image of characters. This function is available for analog signals only.
H-Position: Moves the screen position horizontally.
V-Position: Moves the screen position vertically.
Size: Minimizes any vertical bars or stripes visible on the screen background. The horizontal
screen size will also change. This function is available for analog signals only.
Resolution: If the PC resolution is one of the above, select the same resolution for optimal
picture quality.
1024 x 768
1280 x 768
1360 x 768
1366 x 768
23
User Menus
Adjusting the Audio
Sound
Mode
The best sound tone quality will be selected automatically depending on the video type that you're
currently watching.
Audio
Sound Mode
Volume
Balance
Equalizer
HDMI Sound
Mute
Select
User
Standard
Music
Cinema
Game
:
:
:
►►
:
:
Enter
Menu
• User: User-defined audio settings.
• Standard: Offers standard-quality sound.
• Music: Optimizes sound for listening to music.
• Cinema: Optimizes sound for watching movies.
• Game: Optimizes sound for playing video games.
Volume
Audio
Sound Mode
Volume
Balance
Equalizer
HDMI Sound
Mute
Select
:
:
:
►►
:
:
10
0
HDMI
Off
Enter
Menu
To adjust the volume.
Volume
10
24
User Menus
Adjusting the Audio
Balance
Audio
Sound Mode
Volume
Balance
Equalizer
HDMI Sound
Mute
:
:
:
►►
:
:
Select
10
0
HDMI
Off
Enter
Menu
Use this function to balance sound from the left and right speakers.
Balance
L
Equalizer
R
0
Audio
Sound Mode
Volume
Balance
Equalizer
HDMI Sound
Mute
Select
:
:
:
►►
:
:
10
0
HDMI
Off
Enter
Menu
This function allows you to customize the volume of each frequency to your preferences.
Equalizer
10 KHz
50
3 KHz
50
1 KHz
50
300 Hz
50
100 Hz
50
Move
Adjust
Menu
HDMI
Sound
If the PC's HDMI port doesn't play an audio signal, set "HDMI Sound" in the OSD menu
to "DVI" and connect the RGB AUDIO-IN port to enable audio.
(* Function works in HDMI mode.)
Mute
This menu is used to mute temporarily.
25
User Menus
Selecting Options
Option
Factory Reset
►►
Time
►►
Language
:
OSD Tone
:
Key Lock
:
Power Saving Mode :
To Set
Select
Menu
Factory Reset
Returns monitor to the default factory settings.
Time
Clock: Sets the current time.
On Time: Sets the time to automatically turn on.
Off Time: Sets the time to automatically turn off.
Input List: Sets the input signal when the monitor is automatically turned on at the specified
time.
Language
Chooses the language in which the control names are displayed.
(Available languages are English, French, German, Spanish, Italian, Portuguese, Japanese,
Korean and Russian.)
OSD Tone
Shows the desktop when the OSD is open.
Key Lock
Disables key input.
It prevents children or other people from entering information.
Power Saving
Mode
For RGB, HDMI/DVI:
Acivavtes energy-saving mode when there is no input signal.
Note
Factory Reset on OSD menu reset all OSD menu except resolution (RGB only), Language,
Time Clock and Tile Mode.
26
User Menus
Screen Tiling Options
• To use this function
- Must be displayed with other products.
- Must be in a function that can be connected to RS-232C or RGB Out.
Tile Mode
Enlarges the screen and is used
with several other products to view
a larger screen display.
Tile
►►
►►
Tile Mode
Temp. Control
Move
• Tile Mode
Enter
Menu
Tile mode and choose Tile alignment and set the ID of the current product to set
location.
- Tile mode: column x row ( c = 1, 2, ..., 15 r = 1, 2, ..., 15)
- 15 x 15 available.
- Configuration of an integration screen is also available as well as configuration
of One by one Display.
• 2X1:
•2X2:
• 3X3:
•4X4:
Product 2
Product 4
Product 9
Product 16
ID 1
ID 2
ID 1
ID 2
ID 1
ID 2
ID 3
ID 1
ID 2
ID 3
ID 4
ID 3
ID 4
ID 4
ID 5
ID 6
ID 5
ID 6
ID 7
ID 8
ID 7
ID 8
ID 9
ID 9
ID 10
ID 11
ID 12
ID 13
ID 14
ID 15
ID 16
Tile ID
Note
DVI output port doesn't support HDCP.
27
User Menus
Screen Tiling Options
Tile Mode
Tile
Tile Mode
Temp. Control
Move
►►
►►
Enter
Menu
Tile Mode
H Tile
V Tile
Tile ID
H Size
V Size
SET ID
Master
Move
:
:
:
:
:
:
:
1
1
1
0
0
1
Off
Adjust
Menu
• H Tile
Adjusts the horizontal size of the screen taking into account the size of the bezel.
• V Tile
Adjusts the vertical size of the screen taking into account the size of the bezel.
• Tile ID
Selects the location of the Tile by setting an ID.
• H Size
Moves the screen horizontally.
• V Size
Moves the screen vertically.
• SET ID
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (0 to 225) using ◄ ►. Use the assigned Set ID to
individually control each product using the Product Control Program.
• Master
The Master function receives the monitor status in RS232C mode.
(When multiple sets are connected, the Master function must be enabled only for one set.)
28
User Menus
Screen Tiling Options
Temp.
Control
This option indicates the monitor's internal temperature and controls the fan.
Tile
Tile mode
Temp. Control
Move
►►
►►
Enter
Menu
Temp. Control
Fan Control
Fan Active Temp.
Hysteresis
Current Temp.
Move
:
:
:
:
Auto
38 ºC
5 ºC
25 ºC
Enter
Menu
• Fan Control
Enables the fan (Auto) depending on the active temperature, enables the
fan (On), or disables the fan (Off).
•F
an Active
Temp.
Sets the operating temperature of the fan inside the monitor.
• Hysteresis
Sets the temperature difference between when the fan is operating and
when it stops.
•C
urrent
Temp.
Indicates the monitor's internal temperature.
29
Troubleshooting
No Image is Displayed
● Is the product power cord connected?
• See if the power cord is properly connected to the outlet.
● Is the power indicator light on?
• See if the power switch is turned on.
• May need service.
●P
ower is on, power indicator is blue but the
screen appears extremely dark.
• Adjust brightness and contrast again.
• Backlight may need repair.
● Is The power indicator amber?
• If the product is in power saving mode, move the mouse
or press any key.
• Turn both devices off and then back on.
●D
oes the 'Out of range' message appear?
• The signal from the PC (video card) is out of the vertical
or horizontal frequency range of the product. Adjust the
frequency range by referring to the Specifications in this
manual.
* Maximum resolution
RGB: 1360 x 768 @ 60 Hz
HDMI / DVI: 1360 x 768 @ 60 Hz
●D
oes the 'Check signal cable' message • The signal cable between PC and product is not
appear?
connected. Check the signal cable.
• Press SOURCE on the remote control to check the input
signal.
'Unknown Product' Message Appears When the Television is Connected
● Did you install the driver?
• Install the television driver provided with the
television, or download it from http://www.
LGsolutions.com
• See if the plug & play function is supported by
referring to your video card user manual.
'Key Lock On' message appears.
● The 'Key Lock On' message appears when
pressing Menu.
Note
• The control locking function prevents unintentional
OSD changes due to careless usage. To unlock the
controls, simultaneously press MENU and ► for
several seconds. (You cannot set this function using
the remote control. You can set this function on the
monitor only.)
• Vertical frequency: To enable the user to watch the monitor, the screen image should be
changed tens of times every second like a fluorescent lamp. The vertical frequency or refresh
rate is the times per second the image changes. The unit is Hz.
• Horizontal frequency: The horizontal interval is the time to display one vertical line. When 1 is
divided by the horizontal interval, the number of horizontal lines displayed every second can be
tabulated as the horizontal frequency. The unit is kHz.
30
Troubleshooting
The Screen Image Looks Abnormal
● Is the screen position wrong?
• D-sub analog signal - Press ENTER in the
remote control to automatically select the
optimal screen status that fits into the current
mode. If adjustment is not satisfactory, use the
Position OSD menu.
• See if the video card resolution and frequency
are supported by the product. If the frequency
is out of range, set to the recommended
resolution in the Control Panel "SCREEN"
Setting menu.
●D
o thin lines appear on the
wbackground screen?
• D-sub analog signal - Press ENTER in the
remote control to automatically select an
optimal screen status that fits into the current
mode. If adjustment is not satisfactory, use the
Clock OSD menu.
●H
orizontal noise appears or the
characters look blurred.
• D-sub analog signal - Press ENTER in the
remote control to automatically select an
optimal screen status that fits into the current
mode. If adjustment is not satisfactory, use the
Phase OSD menu.
● The screen is displayed abnormally.
• The proper input signal is not connected to the
signal port. Connect the signal cable that
matches with the source input signal.
After-image Appears on the Screen
●A
fter-image appears when the
product is turned off.
• If you use a fixed image for a long time, the
pixels may be damaged quickly. Use the screen
- saver function.
31
Troubleshooting
The Audio Does Not Work
● No sound?
• See if the audio cable is connected properly.
• Adjust the volume.
• See if the sound is set properly.
● Sound is too dull.
• Select the appropriate equalizer setting.
● Sound is too low.
• Adjust the volume.
Screen Color is Abnormal
●S
creen has poor color resolution
(16 colors).
• Set the number of colors to more than 24 bits (true
color)
Select Control Panel - Display - Settings - Color
Table menu in Windows.
●S
creen color is unstable or mono - • Check the connection status of the signal cable.
colored.
Or, re - insert the PC video card.
●D
o black spots appear on the screen?
• S
everal pixels (red, green, white or black color)
may appear on the screen, which can be
attributable to the unique characteristics of the
LCD panel. The it is not a malfunction of the LCD.
Abnormal Operation
● The power suddenly turned off.
• Is the sleep timer set?
• C
heck the power control settings.
Power interrupted.
• "CAUTION! FAN STOP!"
If the power is turns off after this message
appears, it means that the fan has malfunctioned.
Contact your local service center.
32
Specifications
The product specifications can change without prior notice for product improvement.
LCD Panel
116.8 cm (46 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 116.8 cm
0.7455 mm (Pixel Pitch)
Power
Rated Voltage
Power Consumption
AC 100-240 V~ 50 / 60 Hz 5 A
On Mode
260 W Typ.
Sleep Mode
≤ 1 W (RGB) / 4 W(HDMI / DVI)
Off Mode
≤1W
Dimensions,
Weight
H
W
D
Width x Height x Depth
1025.6 cm (40.38 inch) x 579.8 cm (22.83 inch) x 108.2 cm (4.26 inch)
Net
26.0 kg (57.32 lb)
Video Signal
Max. Resolution
RGB: 1360 x 768 @ 60 Hz
HDMI / DVI: 1360 x 768 @ 60 Hz
Recommended
Resolution
RGB: 1360 x 768 @ 60 Hz
HDMI / DVI: 1360 x 768 @ 60 Hz
Horizontal Frequency
RGB: 31 kHz to 64 kHz
HDMI / DVI: 31 kHz to 64 kHz
Vertical Frequency
RGB: 58 Hz to 60 Hz
HDMI / DVI: 58 Hz to 60 Hz
Synchronization Type
Separate / Digital
Input
Connector
15-pin D-sub type, HDMI/DVI (digital), Component, RS-232C, AV(CVBS)
Environmental
Conditions
Operational Condition
Storage Condition
Temperature: 0 °C to 40 °C, Humidity: 10 % to 80 %
Temperature: -20 °C to 60 °C, Humidity: 5 % to 95 %
NOTE
Information in this document is subject to change without notice.
33
Specifications
PC Mode - Preset Mode
Preset mode
1
*2
*3
*4
*5
720 x 400
640 x 480
800 x 600
1024 x 768
1280 x 720
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
31.468
31.469
37.879
48.363
45
Preset mode
70.8
59.94
60.317
60
60
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
*6
*7
8
1360 x 768
1280 x 1024
1152 x 864
47.72
63.981
53.7
59.799
60.02
60
9
10
1280 x 800
1280 x 960
49.6
60
60
60
1 to 10 : RGB Mode
* : HDMI/DVI Mode
DTV Mode
Component
480i
576i
480p
576p
720p
1080i
HDMI / DVI(DTV)
o
o
o
o
o
o
x
x
o
o
o
o
Power Indicator
Mode
On Mode
Sleep Mode
Off Mode
Product
Green
Amber
-
34
RS-232C
Controlling Multiple Products
Use this method to connect several products to a single PC. You can control several products at a
time by connecting them to a single PC.
If the [Set ID] menu in [Multi] is set to 1, the monitor ID value should be set between 1 and 225.
Connecting the Cable
Connect the RS-232C cable as shown in the picture.
You need to purchase a cable to connect the RS-232C socket because it is not provided
with the monitor.
RS-232C protocol is used for communication between the PC and product. You can turn
the product on/off, select an input source or adjust the OSD menu from your PC.
RS-232C Cable
(not included)
PC
monitor 1
monitor 3
monitor 2
monitor 4
RS-232C Configurations
3-Wire Configurations (Not Standard)
7-Wire Configurations (Standard RS-232C cable)
PC
RXD
TXD
GND
DTR
DSR
RTS
CTS
2
3
5
4
6
7
8
D-Sub 9
(Female)
PC
Monitor
3
2
5
6
4
8
7
RXD
TXD
GND
DTR
DSR
RTS
CTS
TXDRXD
GND
DSR
DTR
CTS
RTS
2
3
5
4
6
7
8
D-Sub 9
(Female)
D-Sub 9
(Female)
Communication Parameters
► Baud Rate: 9600 buad Rate (UART)
► Data Length: 8 bit
► Parity Bit: None
► Stop Bit: 1bit
► Flow Control: None
► Communication Code: ASCII code
► Use a crossed (reverse) cable
A1
Monitor
3
2
5
6
4
7
8
D-Sub 9
(Female)
TXDRXD
GND
DTR
DSR
RTS
CTS
Controlling Multiple Products
RS-232C
Command Reference List
Command
1
Command
2
Data0
(Hex)
k
a
00-01
02. Input List
x
b
20-A0
03. Picture Mode
d
x
00-05
Change the input port
04. Brightness
k
h
00-64
RGB, HDMI, AV, Component
05. Contrast
k
g
00-64
RGB, HDMI, AV, Component
06. Color
k
i
00-64
Only AV, Component
07. Tint
k
j
00-64
Only AV
08. Sharpness
k
k
00-64
Only AV, Component
09. Color Temperature
k
u
00-05
10. Color Temperature
User Red
i
r
00-64
11. C
olor Temperature
User Green
i
g
00-64
12. Color Temperature
User Blue
i
b
00-64
13. Aspect Ratio
k
c
01-09
Change the input port
14. Auto Config
j
u
01
Only RGB
15. Sound Mode
d
y
00-05
16. Volume
k
f
00-64
17. Mute
k
e
00-01
18. Factory Reset
f
k
00-02
19. Time
f
a
00
00-17
00-3B
‘00’/Hour/ Minute
20. On Time
(On / Off Timer)
f
d
00-01
00-17
00-3B
Off, On/Hour/ Minute
21. Off Time
(On / Off Timer)
f
e
00-01
00-17
00-3B
Off, On/Hour/ Minute
22. On Timer List
f
u
00-09
23. Language
f
i
00-09
24. Key Lock
k
m
00-01
25. Tile Mode
d
d
00-FF
26. Tile mode check
i
a
FF
27. H Size
d
g
00-14
Content
01. Power
A2
Data1
(Hex)
Data2
(Hex)
Remark
Controlling Multiple Products
RS-232C
Command
1
Command
2
Data0
(Hex)
28. V Size
d
h
00-14
29. Tile ID
d
i
01-E1
30. Master
g
b
00-01
31. Fan Control
g
c
00-02
32. Fan Active Temp.
g
d
14-64
33. Hysteresis
g
e
00-14
34. Current Temp
d
n
FF
35. Key
m
c
Key Code
36. Power Saving Mode
f
j
00-01
37. Software Version
f
z
FF
Read only
38. Panel Time
d
l
FF
Day Count
39. Sub Brightness
h
a
40. Sub Contrast
h
b
40-BF
41. Red Offset
h
c
3B-BA
42. Green Offset
h
d
3B-BA
43. Blue Offset
h
e
3B-BA
44. Red Gain
h
f
40-BF
45. Green Gain
h
g
40-BF
46. Blue Gain
h
h
40-BF
47. Backlight
h
i
00-FA
48. Input List
k
b
02-09
Content
Data1
(Hex)
Data2
(Hex)
Remark
Read only
3B-BA
A3
00, 19, 32, 4B, 64, 7D, 96,
AF, C8, E1, FA
RS-232C
Controlling Multiple Products
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1]: First command. (k, j, m, d, f, x)
* [Command 2]: Second command.(a to u)
* [Set ID]: Set up the Set ID number of product.
range : 01H to E1H. by setting '0', server can control all products.
* In case of operating with more than 2 sets using set ID as '0' at the same time, it should
not be checked the ack message. Because all sets will send the ack message, so it's
impossible the check the whole ack messages.
* [DATA]: To transmit command data.
Transmit 'FF' data to read status of command.
* [Cr]: Carriage Return
ASCII code '0 x 0 D'
* [ ]: ASCII code Space (0 x 20)
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Product transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if the
data is data read mode, it indicates present status data.
If the data is data write mode, it returns the data of the PC
computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* If there is error, it returns NG
A4
Controlling Multiple Products
RS-232C
Transmission / Receiving Protocol
01. Power (Command 1: k, Command 2: a)
► To control Power On / Off of the Set.
TransmissionAcknowledgement
[k][a][ ][Set ID][ ][Data][Cr]
Data
0 : Power Off
1 : Power On
[a][ ][Set ID][ ][OK/NG][Data][x]
FF : Read Status
02. Input List (Command 1: x, Command 2: b)
► To select input list for the Set.
TransmissionAcknowledgement
[x][b][ ][Set ID][ ][Data][Cr]
[b][ ][Set ID][ ][OK/NG][Data][x]
Data (Hex)
Data
Input List
60
RGB
A0
HDMI
20
AV
40
Component
03. Picture Mode (Command 1: d, Command 2: x)
► To adjust the picture mode.
TransmissionAcknowledgement
[d][x][ ][Set ID][ ][Data][Cr]
[x][ ][Set ID][ ][OK/NG][Data][x]
Data (Hex)
Data / Input List
RGB
HDMI
AV
Component
05
User
User
User
User
00
Vivid
Vivid
Vivid
Vivid
01
Standard
Standard
Standard
Standard
Cinema
Cinema
Game
Game
02
04
Game
Game
A5
RS-232C
Controlling Multiple Products
Transmission / Receiving Protocol
04. Brightness (Command 1: k, Command 2: h)
► To adjust screen brightness.
TransmissionAcknowledgement
[k][h][ ][Set ID][ ][Data][Cr]
[h][ ][Set ID][ ][OK/NG][Data][x]
Data
Min : 0 to Max : 64 (*transmit by Hexadecimal code)
Input List : RGB, HDMI, AV, Component
05. Contrast (Command 1: k, Command 2: g)
► To adjust screen contrast.
TransmissionAcknowledgement
[k][g][ ][Set ID][ ][Data][Cr]
[g][ ][Set ID][ ][OK/NG][Data][x]
Data
Min : 0 to Max : 64 (*transmit by Hexadecimal code)
Input List : RGB, HDMI, AV, Component
06. Color (Command 1: k, Command 2: i)
► To adjust the screen color.
TransmissionAcknowledgement
[k][i][ ][Set ID][ ][Data][Cr]
[i][ ][Set ID][ ][OK/NG][Data][x]
Data
Min : 0 to Max : 64 (*transmit by Hexadecimal code)
Input List : AV, Component
07. Tint (Command 1: k, Command 2: j)
► To adjust the screen tint.
TransmissionAcknowledgement
[k][j][ ][Set ID][ ][Data][Cr]
[j][ ][Set ID][ ][OK/NG][Data][x]
Data
Min : 0 to Max : 64 (*transmit by Hexadecimal code)
Input List : AV
ex) 00H : R50
64H : G50
If the screen tint is set to 0 in the menu, it becomes a hexademical code (0 x 32) in the transfer
protocol.
A6
Controlling Multiple Products
RS-232C
Transmission / Receiving Protocol
08. Sharpness (Command 1: k, Command 2: k)
► To adjust the screen Sharpness.
TransmissionAcknowledgement
[k][k][ ][Set ID][ ][Data][Cr]
[k][ ][Set ID][ ][OK/NG][Data][x]
Data
Min : 0 to Max : 64 (*transmit by Hexadecimal code)
Input List: AV, Component
09. Color Temperature (Command 1: k, Command 2: u)
► To adjust the screen color temperature.
TransmissionAcknowledgement
[k][u][ ][Set ID][ ][Data][Cr]
[u][ ][Set ID][ ][OK/NG][Data][x]
Data (Hex)
Data
Color Temperature
03
User
04
Cool2
01
Cool1
00
Medium
02
Warm1
05
Warm2
10. Color Temperature User Red (Command 1: i, Command 2: r)
► To adjust screen color temperature user red.
TransmissionAcknowledgement
[i][r][ ][Set ID][ ][Data][Cr]
Data
[i][ ][Set ID][ ][OK/NG][Data][x]
Min : 0 to Max : 64 (*transmit by Hexadecimal code)
11. Color Temperature User Green (Command 1: i, Command 2: g)
► To adjust screen color temperature user green.
TransmissionAcknowledgement
[i][g][ ][Set ID][ ][Data][Cr]
Data
[g][ ][Set ID][ ][OK/NG][Data][x]
Min : 0 to Max : 64 (*transmit by Hexadecimal code)
A7
Controlling Multiple Products
RS-232C
Transmission / Receiving Protocol
12. Color Temperature User Blue (Command 1: i, Command 2: b)
► To adjust screen color temperature user blue.
TransmissionAcknowledgement
[i][b][ ][Set ID][ ][Data][Cr]
Data
[b][ ][Set ID][ ][OK/NG][Data][x]
Min : 0 to Max : 64 (*transmit by Hexadecimal code)
13. Aspect Ratio (Command 1: k, Command 2: c)
► To adjust the screen format.
TransmissionAcknowledgement
[k][c][ ][Set ID][ ][Data][Cr]
[c][ ][Set ID][ ][OK/NG][Data][x]
Data (Hex)
Data
RGB
HDMI
Data
AV
Component
01
4:3
4:3
02
16:9
16:9
02
16:9
16:9
09
Just Scan
Just Scan
04
Zoom
Zoom
01
4:3
4:3
07
14:9
14:9
14. Auto Config. (Command 1: j, Command 2: u)
► To adjust picture position and minimize image shaking automatically.
It works only in RGB mode.
TransmissionAcknowledgement
[j][u][ ][Set ID][ ][Data][Cr]
[u][ ][Set ID][ ][OK/NG][Data][x]
Data 1: To set
A8
Controlling Multiple Products
RS-232C
Transmission / Receiving Protocol
15. Sound Mode (Command 1: d, Command 2: y)
► To adjust the Sound mode.
TransmissionAcknowledgement
[d][y][ ][Set ID][ ][Data][Cr]
[y][ ][Set ID][ ][OK/NG][Data][x]
Data (Hex)
Data
Sound Mode
00
User
01
Standard
02
Music
03
Cinema
05
Game
16. Volume (Command 1: k, Command 2: f)
► To adjust Volume.
TransmissionAcknowledgement
[k][f][ ][Set ID][ ][Data][Cr]
Data
[f][ ][Set ID][ ][OK/NG][Data][x]
Min : 0 to Max : 64 (*transmit by Hexadecimal code)
17. Mute (Command 1: k, Command 2: e)
► To control On/Off of the Volume Mute.
TransmissionAcknowledgement
[k][e][ ][Set ID][ ][Data][Cr]
Data 0: Volume Mute On (Volume Off)
[e][ ][Set ID][ ][OK/NG][Data][x]
1:Volume Mute Off (Volume On)
18. Factory Reset (Command 1: f, Command 2: k)
► Execute the Picture, Screen and Factory Reset functions.
TransmissionAcknowledgement
[f][k][ ][Set ID][ ][Data][Cr]
Data
System Reset
00
User
01
User + Factory
02
User + Factory + Tile Mode
[k][ ][Set ID][ ][OK/NG][Data][x]
User: Initializes the customized values (except for
the tile mode, resolution (RGB only), language
and current time).
Factory: Initializes the resolution (RGB only),
language and current time.
Tile Mode: Initializes the tile mode.
A9
RS-232C
Controlling Multiple Products
Transmission / Receiving Protocol
19. Time (Command 1: f, Command 2: a)
► Set the current time.
TransmissionAcknowledgement
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1: ffh (read)
00h to 06h (write of Time Day) (not use)
(*transmit by Hexadecimal code)
Data3: ffh : read Time Minutes
00h to 3bh : write of Time Minutes
(*transmit by Hexadecimal code)
Data2: ffh : read Time Hours
00h to 17h : write of Time Hours
(*transmit by Hexadecimal code)
* The day of week cannot be set even if Data 1 is entered.
20. On Time (On/Off Timer) (Command 1: f, Command 2: d)
► Set On Timer.
TransmissionAcknowledgement
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1 : f1h : read index of On Time
e1h : write of On Time off
80h : write of On Time on
(*transmit by Hexadecimal code)
Data 3 :ffh : read of On Time Minutes
00h to 3bh : write of On Time Minutes
(*transmit by Hexadecimal code)
Data 2 :ffh : read of On Time Hours
00h to 17h : write of On Time Hours
(*transmit by Hexadecimal code)
21. Off Time (On/Off Timer) (Command 1: f, Command 2: e)
► Set Off Timer.
TransmissionAcknowledgement
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data 1 :f1h : read index of Off Time
e1h : write of Off Time off
80h : write of Off Time on
(*transmit by Hexadecimal code)
Data 3 :ffh : read of Off Time Minutes
00h to 3bh : write of Off Time Minutes
(*transmit by Hexadecimal code)
Data 2 :ffh : read of Off Time Hours
00h to 17h : write of Off Time Hours
(*transmit by Hexadecimal code)
A10
Controlling Multiple Products
RS-232C
Transmission / Receiving Protocol
22. On Timer List (Command 1: f, Command 2: u)
► Selects the input source depending on the day of the week.
TransmissionAcknowledgement
[f][u][ ][Set ID][ ][Data1][ ][Data2][Cr]
[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]
Data 1 : f1h : write/read index of On Time Input
Data 2 :
Data(Hexa)
Input List
7
RGB
9
HDMI
2
AV
4
Component
* when you read the current On Time Input, [Data2] needs to be 0xff
ex) fu 01 f1 ff - when you read index of On Time Input
ex) fu 01 f1 07 - when you write index of On Time Input RGB
23. Language (Command 1: f, Command 2: i)
► Set the OSD language.
TransmissionAcknowledgement
[f][i][ ][Set ID][ ][Data][Cr]
[i][ ][Set ID][ ][OK/NG][Data][x]
Data (Hex)
Data
Language
Data
Language
Data
Language
00
English
04
Italiano
08
한국어
01
Français
05
Português
09
Рyсский
02
Deutsch
06
03
Español
07
日本語
24. Key Lock (Command 1: k, Command 2: m)
► Enables/disables the set's lock function.
TransmissionAcknowledgement
[k][m][ ][Set ID][ ][Data][Cr]
Data 0: Lock disabled
[m][ ][Set ID][ ][OK/NG][Data][x]
1: Lock enabled
A11
Controlling Multiple Products
RS-232C
Transmission / Receiving Protocol
25. Tile Mode (Command 1: d, Command 2: d)
► Change a Tile Mode.
TransmissionAcknowledgement
[d][d][ ][Set ID][ ][Data][Cr]
[d][ ][Set ID][ ][OK/NG][Data][x]
Data (Hex)
Data
IR Remote Key
00, 11
Tile mode is off.
12
1 x 2 mode
13
1 x 3 mode
…
…
FF
15 x 15 mode
ex) Data 13 : Indicates that the H Tile is 1 and the V Tile is 3.
Except for 00, a value 0X or X0 cannot be used.
26. Tile mode check (Command 1: i, Command 2: a)
► Check the tile mode.
TransmissionAcknowledgement
[i][a][ ][Set ID][ ][Data][Cr]
[a][ ][Set ID][ ][OK/NG][Data][x]
The data is always FF (in Hexa)
27. H Size (Command 1: d, Command 2: g)
► To set the Horizontal position.
TransmissionAcknowledgement
[d][g][ ][Set ID][ ][Data][Cr]
[g][ ][Set ID][ ][OK/NG][Data][x]
Data
Min : 00H to Max : 14H (*transmit by Hexadecimal code)
If the H tile is set to 1, it does not work.
28. V Size (Command 1: d, Command 2: h)
► To set the Vertical position.
TransmissionAcknowledgement
[d][h][ ][Set ID][ ][Data][Cr]
[h][ ][Set ID][ ][OK/NG][Data][x]
Data
Min : 00H to Max : 14H (*transmit by Hexadecimal code)
If the V tile is set to 1, it does not work.
A12
Controlling Multiple Products
RS-232C
Transmission / Receiving Protocol
29. Tile ID (Command 1: d, Command 2: i)
► Assigns the tile ID.
TransmissionAcknowledgement
[d][i][ ][Set ID][ ][Data][Cr]
Data
[i][ ][Set ID][ ][OK/NG][Data][x]
Min : 1H to Max : E1 (*transmit by Hexadecimal code)
30. Master (Command 1: g, Command 2: b)
► Assigns the master for the multi function.
TransmissionAcknowledgement
[g][b][ ][Set ID][ ][Data][Cr]
[b][ ][Set ID][ ][OK/NG][Data][x]
Data 0 : Master Off,
1 : Master On
* The Master function receives the monitor status in RS232C mode.
When multiple sets are connected, the Master function must be enabled only for one set.
31. Fan Control (Command 1: g, Command 2: c)
► Controls the fan.
TransmissionAcknowledgement
[g][c][ ][Set ID][ ][Data][Cr]
[c][ ][Set ID][ ][OK/NG][Data][x]
Data 0 : Natural Off
Data
Fan Control Mode
00
Off
01
On
02
Auto
32. Fan Active Temp (Command 1: g, Command 2: d)
► Sets the operation temperature of the fan.
TransmissionAcknowledgement
[g][d][ ][Set ID][ ][Data][Cr]
Data
[d][ ][Set ID][ ][OK/NG][Data][x]
Min : 14H to Max : 64H (*transmit by Hexadecimal code)
A13
Controlling Multiple Products
RS-232C
Transmission / Receiving Protocol
33. Hysteresis (Command 1: g, Command 2: e)
► Sets the temperature difference between when the fan is operating and it stops.
TransmissionAcknowledgement
[g][e][ ][Set ID][ ][Data][Cr]
Data
[e][ ][Set ID][ ][OK/NG][Data][x]
Min : 00H to Max : 14H (*transmit by Hexadecimal code)
34. Current Temp (Command 1: d, Command 2: n)
► Checks the internal temperature.
TransmissionAcknowledgement
[d][n][ ][Set ID][ ][Data][Cr]
[n][ ][Set ID][ ][OK/NG][Data][x]
The data is always FF (in Hex)
To read the temperature value
35. Key (Command 1: m, Command 2: c)
► To send IR remote key code.
TransmissionAcknowledgement
[m][c][ ][Set ID][ ][Data][Cr]
[c][ ][Set ID][ ][OK/NG][Data][x]
Data (Hex)
Data
IR Remote Key
Data
IR Remote Key
08
Power
00
Up
43
Menu
01
Down
5B
Exit
02
Left
0B
Source (Input list)
03
Right
44
Enter
36. Power Saving Mode (Command 1: f, Command 2: j)
► Set the DPM (Display Power Management) function.
TransmissionAcknowledgement
[f][j][ ][Set ID][ ][Data][Cr]
Data 0 : Off,
[j][ ][Set ID][ ][OK/NG][Data][x]
1 : On
A14
RS-232C
Controlling Multiple Products
Transmission / Receiving Protocol
37. Software Version (Command 1: f, Command 2: z)
► Checks the software version.
TransmissionAcknowledgement
[f][z][ ][Set ID][ ][Data][Cr]
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
The data is always FF (in Hex)
Data1
6 : 06
Data2
0 : 00
Data3
0 : 00
To read the software version.
ex) DID IN HD EU V6.00 100416
38. Panel Time (Command 1: d, Command 2: l)
► Checks how long the panel of the monitor is used.
TransmissionAcknowledgement
[d][l][ ][Set ID][ ][Data][Cr]
[l][ ][Set ID][ ][OK/NG][Data1][Data2][x]
The data is always FF (in Hex)
Data1,2:Day (Data are 2byte long in Hex ASCII format)
39. Sub Brightness (Command 1: h, Command 2: a)
► Sets the brightness of the factory menu.
TransmissionAcknowledgement
[h][a][ ][Set ID][ ][Data][Cr]
Data
[a][ ][Set ID][ ][OK/NG][Data][x]
Min : 3B to Max : BA (*transmit by Hexadecimal code)
40. Sub Contrast (Command 1: h, Command 2: b)
► Sets the contrast of the factory menu.
TransmissionAcknowledgement
[h][b][ ][Set ID][ ][Data][Cr]
Data
[b][ ][Set ID][ ][OK/NG][Data][x]
Min : 40 to Max : BF (*transmit by Hexadecimal code)
A15
RS-232C
Controlling Multiple Products
Transmission / Receiving Protocol
41. Red Offset (Command 1: h, Command 2: c)
► Sets the red offset of the factory menu.
TransmissionAcknowledgement
[h][c][ ][Set ID][ ][Data][Cr]
Data
[c][ ][Set ID][ ][OK/NG][Data][x]
Min : 3B to Max : BA (*transmit by Hexadecimal code)
42. Green Offset (Command 1: h, Command 2: d)
► Sets the green offset of the factory menu.
TransmissionAcknowledgement
[h][d][ ][Set ID][ ][Data][Cr]
Data
[d][ ][Set ID][ ][OK/NG][Data][x]
Min : 3B to Max : BA (*transmit by Hexadecimal code)
43. Blue Offset (Command 1: h, Command 2: e)
► Sets the blue offset of the factory menu.
TransmissionAcknowledgement
[h][e][ ][Set ID][ ][Data][Cr]
Data
[e][ ][Set ID][ ][OK/NG][Data][x]
Min : 3B to Max : BA (*transmit by Hexadecimal code)
44. Red Gain (Command 1: h, Command 2: f)
► Sets the red gain of the factory menu.
TransmissionAcknowledgement
[h][f][ ][Set ID][ ][Data][Cr]
Data
[f][ ][Set ID][ ][OK/NG][Data][x]
Min : 40 to Max : BF (*transmit by Hexadecimal code)
A16
Controlling Multiple Products
RS-232C
Transmission / Receiving Protocol
45. Green Gain (Command 1: h, Command 2: g)
► Sets the green offset of the factory menu.
TransmissionAcknowledgement
[h][g][ ][Set ID][ ][Data][Cr]
Data
[g][ ][Set ID][ ][OK/NG][Data][x]
Min : 40 to Max : BF (*transmit by Hexadecimal code)
46. Blue Gain (Command 1: h, Command 2: h)
► Sets the blue offset of the factory menu.
TransmissionAcknowledgement
[h][h][ ][Set ID][ ][Data][Cr]
Data
[h][ ][Set ID][ ][OK/NG][Data][x]
Min : 40 to Max : BF (*transmit by Hexadecimal code)
47. Backlight (Command 1: h, Command 2: i)
► Sets the backlight of the factory menu.
TransmissionAcknowledgement
[h][i][ ][Set ID][ ][Data][Cr]
[i][ ][Set ID][ ][OK/NG][Data][x]
Data Min 0, 19, 32, 4B, 64, 7D, 96, AF, C8, E1, FA (*transmit by Hexadecimal code)
48. Input List (Command 1: k, Command 2: b)
► To select input source for the Set.
TransmissionAcknowledgement
[k][b][ ][Set ID][ ][Data][Cr]
Data(Hexa)
[b][ ][Set ID][ ][OK/NG][Data][x]
Input List
7
RGB
9
HDMI/DVI
2
AV
4
Component
A17
Controlling
IRMultiple
Codes Products
RS-232C
Remote Control IR Code
► Remote Control System Infrared Rays System
fosc = 455 KHz
fc = fosc / 12 = 37.917 KHz
► Signal Code
● Transmission
High
custom code
Low
custom code
Lead
code
Data code
Data code
9 ms 4.5 ms
Bit Description
▪ Bit "0"
▪ Bit "1"
0.56 ms
0.56 ms
1.125 ms
2.25 ms
▪ Flame Interval
Tf
Tf
Tf = 108 ms @ 455 kHz
Code (Hexa)
Funtion
80
POWER (Button)
8D
Up (▲)
8E
Down (▼)
8F
Left (◄)
90
Right (►)
8C
ENTER (Button)
95
MENU (Button)
96
EXIT (Button)
AC
SOURCE
A18
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an
accessible place for future reference.
The model and serial number of the SET
is located on the back and one side of the
SET. Record it below should you ever need
service.
MODEL
SERIAL
Important
WARRANTY VOID
IF REMOVED
3850TAZ209Y
Warranty void if removed.
WARNING -This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may
be required to take adequate measures.
Temporary noise is normal when powering
ON or OFF this device.
Download PDF

advertising